DillonManufacturing, Inc.
Top Jaws Full Line Catalog
P: 1-800-428-1133
F: 1-800-634-6480
www.dillonmfg.com
TABLE OF CONTENTS
*Go to www.dillonmfg.com for more products not listed in catalog
1.5MM x 60° Serrated
Acme Serrated Key Type
Soft Jaws ...........................................................1-2
Soft Jaws ............................................................ 22
Full Grips .............................................................. 3
Full Grips ............................................................ 23
Hard Jaws ............................................................. 4
Hard Jaws ........................................................... 23
Jaw Nuts ...........................................................4-5
Jaw Nuts ............................................................. 23
Acme Serrated Master Key................................. 24
3.0MM x 60° Serrated
Soft Jaws .............................................................. 5
Square Serrated Key Type
Full Grips .............................................................. 6
Soft Jaws .......................................................24-25
Hard Jaws ............................................................. 6
Full Grips ............................................................ 25
Jaw Nuts ............................................................... 7
Hard Jaws ........................................................... 26
Jaw Nuts ............................................................. 26
1/16 x 90° Serrated
Square Serrated Master Key ............................... 26
Soft Jaws ...........................................................7-9
Full Grips .........................................................9-10
Pin Location Type
Hard Jaws ........................................................... 10
Northfield & Microcentric Types ......................... 27
Jaw Nuts ............................................................ 11
Miscellaneous Jaws
3/32 x 90° Serrated
New Britain ......................................................... 28
Soft Jaws .......................................................11-12
Howa HO18 ....................................................... 28
Hard Jaws ........................................................... 13
Bullard ................................................................ 28
Jaw Nuts ............................................................. 13
Buck .................................................................... 29
American Standard Tongue & Groove
Collet Pads And Jaws
Medium Duty...................................................... 14
Collet Pad Jaws .................................................. 30
Soft Jaws .......................................................14-15
Warner & Swasey Collet Pads ............................ 30
Full Grips .......................................................15-16
S-Style Collet Pads ........................................31-32
Hard Jaws ........................................................... 16
Heavy Duty ......................................................... 17
Special Soft Jaws
Soft Jaws ............................................................ 18
Serrated .............................................................. 33
Full Grips ............................................................ 19
Tongue & Groove ............................................... 33
Hard Jaws ........................................................... 19
Acme Serrated.................................................... 34
Square Serrated .................................................. 34
Metric Tongue & Groove
Soft Jaws ............................................................ 20
Special Hard Jaws
Full Grips ............................................................ 21
Serrated .............................................................. 35
Hard Jaws ........................................................... 21
Tongue & Groove ............................................... 36
Monoblock Jaws ................................................. 21
Acme Serrated.................................................... 37
Base Jaws ........................................................... 22
Square Serrated .................................................. 38
DillonManufacturing, Inc.
Made in the USA
Rev. 10, 5-4-2015
ALPHABETICAL REFERENCE BY CHUCK TYPE
Chucks
Type
Page
Atlas
American Standard Tongue & Groove ................................................ 14-19
Bergman
American Standard Tongue & Groove ................................................ 14-19
Bison
American Standard Tongue & Groove ................................................ 14-19
Buck
American Standard Tongue & Groove ................................................ 14-19
Square Serrated Key Type ................................................................... 29
Bullard
Bullard Style Jaws................................................................................ 28
Cushman
American Standard Tongue & Groove ................................................ 14-19
Acme Serrated Key Type ..................................................................... 22-24
Erickson
1/16 x 90° Serrated ............................................................................. 7-11
Forkardt
1/16 x 90° Serrated ............................................................................. 7-11
3/32 x 90° Serrated ............................................................................. 11-13
Metric Tongue & Groove..................................................................... 20-22
Fuji
3.0MM x 60° Serrated ......................................................................... 5-7
Gamet
1/16 x 90° Serrated ............................................................................. 7-11
Gisholt
Square Serrated Key Type ................................................................... 24-26
Hardinge
1/16 x 90° Serrated ............................................................................. 7-11
1.5MM x 60° Serrated ......................................................................... 1-5
S-Style Collet Pads .............................................................................. 31-32
Howa
1.5MM x 60° Serrated ......................................................................... 1-5
3.0MM x 60° Serrated ......................................................................... 5-7
1/16 x 90° Serrated ............................................................................. 7-11
Acme Serrated Key Type ..................................................................... 22-24
Japanese
1.5MM x 60° Serrated ......................................................................... 1-5
3.0MM x 60° Serrated ......................................................................... 5-7
®
Kitagawa
1.5MM x 60° Serrated ......................................................................... 1-5
3.0MM x 60° Serrated ......................................................................... 5-7
American Standard Tongue & Groove ................................................ 14-19
Collet Pad Jaws ................................................................................... 30
Logansport (LMC)
American Standard Tongue & Groove ................................................ 14-19
Acme Serrated Key Type ..................................................................... 22-24
3.0MM x 60° Serrated ......................................................................... 5-7
Matsumoto (MMK)
1.5MM x 60° Serrated ......................................................................... 1-5
3.0MM x 60° Serrated ......................................................................... 5-7
Microcentric Type
Pin Location Type ................................................................................ 27
1-800-428-1133 | Fax: 1-800-634-6480 | www.dillonmfg.com
ALPHABETICAL REFERENCE BY CHUCK
Chucks
Type
Page
New Britain
American Standard Tongue & Groove................................................ 28
Nikko
1.55MM x 60° Serrated....................................................................... 1-5
Nobel
American Standard Tongue & Groove................................................ 14-19
Northfield Type
Pin Location Type............................................................................... 27
Powerhold
1/16 x 90° Serrated............................................................................ 7-11
Pratt-Burnerd
1.5MM x 60° Serrated........................................................................ 1-5
1/16 x 90° Serrated............................................................................ 7-11
American Standard Tongue & Groove............................................... 14-19
Acme Serrated Key Type.................................................................... 22-24
Square Serrated Key Type.................................................................. 24-26
Rohm
American Standard Tongue & Groove............................................... 14-19
Metric Tongue & Groove................................................................... 20-22
1/16 x 90° Serrated...........................................................................
7-11
3/32 x 90° Serrated...........................................................................
11-13
1.5MM x 60° Serrated.......................................................................
1-5
3.0MM x 60° Serrated.......................................................................
5-7
American Standard Tongue & Groove..............................................
14-19
American Standard Tongue & Groove..............................................
14-19
Acme Serrated Key Type..................................................................
22-24
1.5MM x 60° Serrated......................................................................
1-5
1/16 x 90° Serrated..........................................................................
7-11
Metric Tongue & Groove..................................................................
20-22
1.5MM x 60° Serrated......................................................................
1-5
3.0MM x 60° Serrated......................................................................
5-7
Skinner
American Standard Tongue & Groove.............................................
14-19
SMW Autoblok
1.5MM x 60° Serrated......................................................................
1-5
1/16 x 90° Serrated..........................................................................
7-11
3/32 x 90° Serrated..........................................................................
11-13
Metric Tongue & Groove..................................................................
20-22
American Standard Tongue & Groove..............................................
14-19
Samchully
SCA
Schunk
Seiki
S-P
Square Serrated Key Type................................................................. 24-26
Strong
Warner & Swasey
1.5MM x 60° Serrated.......................................................................
1-5
3.0MM x 60° Serrated.......................................................................
5-7
American Standard Tongue & Groove..............................................
14-19
American Standard Tongue & Groove..............................................
14-19
Square Serrated Key Type................................................................. 24-26
Yuasa
Warner & Swasey Collet Pads...........................................................
30
American Standard Tongue & Groove..............................................
14-19
DillonManufacturing, Inc.
Made in the USA
1.5MM x 60° Serrated
— SOFT JAWS
Add “A” to beginning of part number when ordering aluminum jaws.
Add “P” to end of part number when ordering pointed jaws.
Made with 1018 steel or 6061 aluminum.
Ø
Diameter
4
5
6
6.5
8
10
Part #
HO4
HO4H
HO4-3H
KW4
KW4-2H
KW4H
MK4
MK4H
NI4
NI4H
KW205
KW205H
KW5
KW5H
KW5F
KW5FH
NI5
NI5H
SK5
SK5H
KW6
KW6-2H
KW6H
KW6-4H
KW6-1W
KW6-1WH
HW6
HW6H
NI6
NI6H
JP6
JP6H
MK3NE65
MK3NE65H
MK3NE65-1W
MK3NE65-1WH
KW8
KW8-3H
KW8H
KW8-6H
KW8-3.75L
KW8-3.75LH
HW27M8
HW27M8H
NI8
NI8H
NI205
KW10
KW10-3H
KW10H
KW10-6H
KW10-8H
KW10-1.5W
KW10-1.5WH
KW10-5L
KW10-5LH
HW27M10
HW27M10H
L
Length
H
Height
W
Width
B
Slot Width
F
Bolt Spacing
I
Screw Size
2.00
2.00
2.00
2.00
2.00
2.00
2.125
2.125
2.00
2.00
2.313
2.313
2.313
2.313
2.50
2.50
2.375
2.375
2.75
2.75
3.00
3.00
3.00
3.00
3.00
3.00
2.75
2.75
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
4.00
4.00
4.00
4.00
3.75
3.75
4.50
4.50
4.00
4.00
4.00
4.75
4.75
4.75
4.75
4.75
4.75
4.75
5.00
5.00
4.75
4.75
1.00
2.00
3.00
1.50
2.00
3.00
1.125
2.00
1.50
2.00
1.50
3.00
1.50
3.00
1.50
3.00
1.50
2.00
1.50
3.00
1.50
2.00
3.00
4.00
1.50
3.00
1.50
3.00
1.50
3.00
1.50
3.00
1.50
3.00
1.50
3.00
2.00
3.00
4.00
6.00
2.00
4.00
2.00
4.00
2.00
4.00
2.00
2.00
3.00
4.00
6.00
8.00
2.00
4.00
2.00
4.00
2.00
4.00
.75
.75
.75
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.25
1.25
1.25
1.25
1.00
1.00
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.00
1.00
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.75
1.75
1.75
1.75
1.75
1.50
1.50
1.75
1.75
1.75
1.75
.313
.313
.313
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.394
.433
.433
.394
.394
.472
.472
.472
.472
.472
.472
.472
.472
.551
.551
.433
.433
.433
.433
.433
.433
.551
.551
.551
.551
.551
.551
.630
.630
.551
.551
.669
.630
.630
.630
.630
.630
.630
.630
.630
.630
.709
.709
.591
.591
.591
.551
.551
.551
.557
.557
.591
.591
.551
.551
.713
.713
.750
.750
.669
.669
.748
.748
.787
.787
.787
.787
.787
.787
.796
.796
.787
.787
.968
.968
.984
.984
.984
.984
.984
.984
.984
.984
.984
.984
.984
.984
1.181
1.181
.984
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
M6
M6
M6
M8
M8
M8
M6
M6
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
M8
M8
M8
M8
M8
M8
M12
M12
M12
M12
M12
M12
M12
M12
M10
M10
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M14
M14
1-800-428-1133 | Fax: 1-800-634-6480 | www.dillonmfg.com
1
1.5MM x 60° Serrated
— SOFT JAWS (Continued)
Add “A” to beginning of part number when ordering aluminum jaws.
Add “P” to end of part number when ordering pointed jaws.
Made with 1018 steel or 6061 aluminum.
Ø
Diameter
10
11
12
14-16
15-18
18
2
Part #
MK4NE600
MK4NE600H
NI10
NI10H
JP11
JP11H
KW12
KW12-3H
KW12H
KW12-6H
KW12-8H
KW12-5.5L
KW12-5.5LH
KW12B
KW12B-3H
KW12BH
KW12B-6H
KW12B-8H
KW12B-5.5L
KW12B-5.5LH
HW27M12
HW27M12H
NI12
NI12H
SK5NE12
SK5NE12H
JP12
JP12H
NI15
NI15H
KW15K
KW15K-4H
KW15KH
KW15K-6H
KW15K-8H
KW15K-7L
KW15K-7LH
KW15K-7.5L
KW15K-7.5LH
KW15B
KW15B-4H
KW15BH
KW15B-6H
KW15B-8H
JP15
JP15H
NI18
NI18H
L
Length
H
Height
W
Width
B
Slot Width
F
Bolt Spacing
4.75
4.75
4.50
4.50
4.75
4.75
5.00
5.00
5.00
5.00
5.00
5.50
5.50
4.75
4.75
4.75
4.75
4.75
5.50
5.50
5.50
5.50
5.25
5.25
5.50
5.50
5.50
5.50
6.25
6.25
6.50
6.50
6.50
6.50
6.50
7.00
7.00
7.50
7.50
6.50
6.50
6.50
6.50
6.50
5.75
5.75
7.00
7.00
2.00
4.00
2.00
4.00
2.00
4.00
2.00
3.00
4.00
6.00
8.00
2.50
4.00
2.00
3.00
4.00
6.00
8.00
2.50
4.00
2.50
4.00
2.75
1.75
2.00
4.00
2.50
4.00
2.50
5.00
3.00
4.00
5.00
6.00
8.00
3.00
5.00
3.00
5.00
3.00
4.00
5.00
6.00
8.00
2.50
4.00
3.50
5.00
1.50
1.50
1.75
1.75
1.50
1.50
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
1.75
1.75
2.00
2.00
2.00
2.00
2.00
2.00
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.00
2.00
2.50
2.50
.630
.630
.787
.787
.709
.709
.709
.709
.709
.709
.709
.709
.709
.827
.827
.827
.827
.827
.827
.827
.827
.827
.787
.787
.709
.709
.787
.787
.827
.827
.866
.866
.866
.866
.866
.866
.866
.866
.866
1.004
1.004
1.004
1.004
1.004
.827
.827
1.024
1.024
1.260
1.260
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.377
1.377
1.378
1.378
1.266
1.266
1.375
1.375
1.772
1.772
1.690
1.690
1.690
1.690
1.690
1.690
1.690
1.690
1.690
1.690
1.690
1.690
1.690
1.690
1.562
1.562
1.969
1.969
DillonManufacturing, Inc.
Made in the USA
I
Screw Size
M12
M12
M12
M12
5/8
5/8
M14
M14
M14
M14
M14
M14
M14
M16
M16
M16
M16
M16
M16
M16
M16
M16
M12
M12
M14
M14
M12
M12
M16
M16
M20
M20
M20
M20
M20
M20
M20
20M
20M
M20
M20
M20
M20
M20
5/8
5/8
M20
M20
1.5MM x 60° Serrated
— FULL GRIPS
Made with 356 cast aluminum.
Add “C” to beginning of part number when ordering cast iron jaws.
Add “S” to beginning of part number when ordering steel jaws.
Ø
Diameter
4
5
6
6.5
8
10
11
12
15
15-18
Part #
KW4FG
KW205FG
KW205HFG
KW5FG
KW5HFG
KW6FG
KW6HFG
JP6FG
JP6HFG
MK3NE65FG
MK3NE65HFG
KW8FG
KW8HFG
HW27M8FG
HW27M8HFG
KW10FG
KW10HFG
HW27M10FG
HW27M10HFG
MK4NE600FG
MK4NE600HFG
JP11FG
JP11HFG
KW12FG
KW12HFG
KW12BFG
KW12BHFG
HW27M12FG
HW27M12HFG
SK5NE12FG
SK5NE12HFG
JP12FG
JP12HFG
JP15FG
KW15KFG
KW15KHFG
KW15BFG
KW15BHFG
H
Height
B
Slot Width
F
Bolt Spacing
I
Screw Size
Casting Ø
1.75
1.75
4.00
1.75
4.00
1.75
4.00
1.75
4.00
1.75
4.00
2.00
4.00
2.00
4.00
2.00
4.00
2.00
4.00
2.00
4.00
2.00
4.00
2.375
4.00
2.375
4.00
2.375
4.00
2.75
4.00
2.375
4.00
3.00
3.00
4.00
3.00
4.00
.394
.394
.394
.394
.394
.472
.472
.433
.433
.433
.433
.551
.551
.630
.630
.630
.630
.709
.709
.630
.630
.709
.709
.709
.709
.827
.827
.827
.827
.709
.709
.787
.787
.827
.866
.866
1.004
1.004
.551
.551
.551
.713
.713
.787
.787
.968
.968
.984
.984
.984
.984
.984
.984
1.181
1.181
1.181
1.181
1.260
1.260
1.181
1.181
1.181
1.181
1.181
1.181
1.377
1.377
1.265
1.265
1.375
1.375
1.562
1.690
1.690
1.690
1.690
M8
M8
M8
M8
M8
M10
M10
M8
M8
M8
M8
M12
M12
M12
M12
M12
M12
M14
M14
M12
M12
5/8
5/8
M14
M14
M16
M16
M16
M16
M14
M14
M12
M12
5/8
M20
M20
M20
M20
6”
6”
6’
6”
6”
6”
6”
6”
6”
6”
6”
8”
8”
8”
8”
10”
10”
10”
10”
10”
10”
10”
10”
12”
12”
12”
12”
12”
12”
12”
12”
12”
12”
15”
15”
15”
15”
15”
Extra wide hard jaws used for maximum
part contact and penetration. Ground
locating surface.
1-800-428-1133 | Fax: 1-800-634-6480 | www.dillonmfg.com
3
1.5MM x 60° Serrated
— HARD JAWS
Made with 1018 case hardened steel.
Hard jaws are reversible for OD & ID chucking.
All hard jaws are available in one or two step sets.
All part #’s listed below are two step sets.
Ø
Diameter
4
5
6
Part #
KW4RJ
KW5RJ
KW6RJ
JP6RJ
MK3NE65RJ
KW8RJ
KW10RJ
HW27M8RJ
MK4NE600RJ
JP11RJ
KW12RJ
KW12BRJ
HW27M12RJ
SK5NE12RJ
JP12RJ
KW15KRJ
KW15BRJ
JP15RJ
6.5
8
10
11
12
15
L
Length
H
Height
W
Width
2.50
2.67
2.75
3.00
3.00
3.625
4.25
3.25
4.213
4.125
4.25
4.25
4.375
4.545
4.68
5.875
5.875
5.375
1.50
1.50
1.50
2.25
1.625
2.00
2.50
2.00
3.00
2.50
2.50
2.50
2.50
2.75
2.50
3.50
3.50
2.50
1.25
1.25
1.25
1.00
1.125
1.50
1.75
1.50
1.50
1.75
2.00
2.00
2.00
2.00
1.75
2.50
2.50
2.00
B
Slot Width
F
Bolt Spacing
.394
.394
.472
.433
.433
.551
.630
.630
.630
.709
.709
.827
.827
.709
.787
.866
1.004
.827
.551
.713
.787
.968
.984
.984
1.181
.984
1.260
1.181
1.181
1.181
1.377
1.265
1.375
1.690
1.690
1.562
I
Screw Size
M8
M8
M10
M8
M8
M12
M12
M12
M12
5/8
M14
M16
M16
M14
M12
M20
M20
5/8
1.5MM x 60° Serrated
— JAW NUTS
Type 1
Ø
Diameter
4
4-5
5
6
6.5
8
10
4
Part #
HO4JN
KW4JN
KW204JN
KW5JN
KW5FJN
KW6JN
KW6JN7
HW7MA6JN
JP6JN
MK3NE65JN
KW8JN
KW8JN9
HW27M8JN
HW7MA8JN
KW10JN
KW10JN11
MK4NE600JN
HW27M10JN
HW7MA10JN
L
Length
H
Height
W
Width
.966
1.140
1.030
1.180
1.531
1.437
1.418
1.468
1.578
1.570
1.910
1.830
1.781
1.840
2.010
2.010
2.050
2.031
2.360
.530
.709
.591
.612
.650
.875
.728
.846
.787
.787
1.00
.807
1.043
.895
1.00
.846
.900
1.082
1.043
.452
.590
.570
.550
.590
.687
.687
.669
.689
.690
.813
.807
.866
.807
.875
.875
.905
.945
.866
DillonManufacturing, Inc.
Type 2
F
Bolt Spacing
.591
.551
.551
.713
.750
.787
.787
.787
.968
.984
.984
.984
.984
.984
1.181
1.181
1.260
1.181
.984
M
Thread Size
M6-1.00
M8-1.25
M8-1.25
M8-1.25
M8-1.25
M10-1.50
M10-1.50
M10-1.50
M8-1.25
M8-1.25
M12-1.75
M12-1.75
M12-1.75
M12-1.75
M12-1.75
M12-1.75
M12-1.75
M14-2.00
M12-1.75
T1
Tongue Width
.312
.393
.393
.393
.393
.471
.471
.471
.432
.432
.550
.550
.629
.550
.629
.629
.629
.708
.629
Made in the USA
E
Heel Height
.177
.220
.217
.220
.220
.295
.295
.295
.295
.295
.374
.335
.334
.335
.374
.334
.315
.375
.334
Type
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1.5MM x 60° Serrated
— JAW NUTS (continued)
Type 1
Ø
Diameter
12
15-18
Part #
KW12JN
KW12BJN
BB212JN
HW27M12JN
HW7MA12JN
SK5NE12JN
JP12JN
KW15KJN
KW15BJN
BB218JN
Type 2
L
Length
H
Height
W
Width
F
Bolt Spacing
M
Thread Size
T1
Tongue Width
E
Heel Height
Type
2.187
2.187
2.313
2.380
2.093
2.200
2.187
3.150
3.150
3.150
1.313
1.100
.896
1.140
1.082
1.320
1.313
1.750
1.550
1.145
1.031
1.160
1.160
1.060
.945
1.040
1.031
1.320
1.375
1.375
1.181
1.181
1.181
1.377
1.181
1.265
1.375
1.690
1.690
1.690
M14-2.00
M16-2.00
M16-2.00
M16-2.00
M14-2.00
M14-2.00
M12-1.75
M20-2.50
M20-2.50
M20-2.50
.708
.826
.826
.826
.708
.708
.786
.865
1.003
1.003
.531
.453
.453
.413
.375
.531
.531
.609
.758
.570
1
1
1
1
1
1
1
2
1
1
3.0MM x 60° Serrated
— SOFT JAWS
Add “A” to beginning of part number when ordering aluminum jaws.
Add “P” to end of part number when ordering pointed jaws.
Made with 1018 steel or 6061 aluminum.
Ø
Diameter
6
8
10
12
15
21
24
Part #
L
Length
HF6
HF6H
HF8
HF8H
HF10
HF10H
HF10D
HF10DH
HF12
HF12H
HW27M15
HW27M15H
HW27M15S
HW27M15SH
HW7MA15
HW7MA15H
HF15
HF15H
MK5NE15
MK5NE15H
SB15AQ
SB15AQH
KW21
KW21-4H
KW21H
KW21-8H
KW24B
KW24BH
KW24
KW24H
KW24-8H
2.84
2.84
3.75
3.75
4.75
4.75
4.75
4.75
5.50
5.50
5.75
5.75
5.50
5.50
6.00
6.00
5.75
5.75
6.00
6.00
5.08
5.08
7.09
7.09
7.09
7.09
8.25
8.25
8.25
8.25
8.25
H
Height
W
Width
1.50
3.00
2.00
4.00
2.00
4.00
2.00
4.00
2.50
5.00
2.50
4.00
2.50
4.00
2.50
5.00
2.50
5.00
2.50
5.00
2.00
4.00
3.00
4.00
6.00
8.00
3.50
6.00
3.50
6.00
8.00
1.25
1.25
1.50
1.50
1.75
1.75
1.75
1.75
2.00
2.00
2.00
2.00
2.25
2.25
2.00
2.00
2.25
2.25
2.50
2.50
2.00
2.00
2.50
2.50
2.50
2.50
3.00
3.00
3.00
3.00
3.00
B
Slot Width
.472
.472
.551
.551
.630
.630
.591
.591
.709
.709
1.023
1.023
1.023
1.023
.827
.827
1.023
1.023
.866
.866
.709
.709
.984
.984
.984
.984
.984
.984
.984
.984
.984
1-800-428-1133 | Fax: 1-800-634-6480 | www.dillonmfg.com
F
Bolt Spacing
.787
.787
.984
.984
1.181
1.181
1.181
1.181
1.181
1.181
1.656
1.656
1.656
1.656
1.575
1.575
1.969
1.969
1.969
1.969
1.496
1.496
2.360
2.360
2.360
2.360
2.360
2.360
3.150
3.150
3.150
I
Screw Size
M10
M10
M12
M12
M12
M12
M12
M12
M14
M14
M20
M20
M20
M20
M16
M16
M20
M20
M20
M20
M14
M14
M20
M20
M20
M20
M20
M20
M20
M20
M20
5
3.0MM x 60° Serrated
— FULL GRIPS
Made with 356 cast aluminum.
Add “C” to beginning of part number when ordering cast iron jaws.
Add “S” to beginning of part number when ordering steel jaws.
Ø
Diameter
6
8
10
12
15
21-24
24
Part #
HF6FG
HF6HFG
HF8FG
HF8HFG
HF10FG
HF10HFG
HF10DFG
HF10DHFG
HF12FG
HF12HFG
HF15HFG
HF15FG
MK5NE15FG
MK5NE15HFG
HW27M15FG
HW27M15HFG
HW7MA15FG
HW7MA15HFG
KW21FG
KW21HFG
KW24BFG
KW24BHFG
KW24FG
KW24HFG
H
Height
B
Slot Width
F
Bolt Spacing
I
Screw Size
Casting Ø
.472
.472
.551
.551
.630
.630
.591
.591
.709
.709
1.023
1.023
.866
.866
1.023
1.023
.827
.827
.984
.984
.984
.984
.984
.984
.787
.787
.984
.984
1.181
1.181
1.181
1.181
1.181
1.181
1.969
1.969
1.969
1.969
1.653
1.653
1.575
1.575
2.360
2.360
2.360
2.360
3.150
3.150
M10
M10
M12
M12
M12
M12
M12
M12
M14
M14
M20
M20
M20
M20
M20
M20
M16
M16
M20
M20
M20
M20
M20
M20
6”
6”
8”
8”
10”
10”
10”
10”
12”
12”
15”
15”
15”
15”
15”
15”
15”
15”
21”
21”
24”
24”
24”
24”
1.75
4.00
2.00
4.00
2.00
4.00
2.00
4.00
2.375
4.00
4.00
3.00
3.00
4.00
3.00
4.00
3.00
4.00
3.00
4.00
3.00
4.00
3.00
4.00
3.0MM x 60° Serrated
— HARD JAWS
Made with 1018 case hardened steel.
Hard jaws are reversible for OD & ID chucking.
All hard jaws are available in one or two step sets.
All part #’s listed below are two step sets.
Ø
Diameter
6
8
10
12
15
21-24
6
Part #
HF6RJ
HF8RJ
HF10RJ
HF10DRJ
HF12RJ
HW27M15RJ
HW7MA15RJ
HF15RJ
MK5NE15RJ
KW21-24RJ
L
Length
2.73
3.50
4.25
4.25
4.25
6.00
5.04
6.00
6.00
6.75
DillonManufacturing, Inc.
H
Height
2.00
2.00
2.50
2.50
2.50
3.00
2.50
3.00
3.00
3.50
W
Width
1.25
1.50
1.75
1.75
2.00
2.50
2.00
2.50
2.50
3.00
B
Slot Width
.472
.551
.630
.591
.709
1.023
.827
1.023
.866
.984
Made in the USA
F
Bolt Spacing
I
Screw Size
.787
.984
1.181
1.181
1.181
1.653
1.575
1.969
1.969
2.360
M10
M12
M12
M12
M14
M20
M16
M20
M20
M20
3.0MM x 60° Serrated
— JAW NUTS
Type 1
Ø
Diameter
6
8
10
12
15
21-24
24
Part #
HF6JN
HF8JN
HF10JN
KW12JN
HF15JN
HW27M15JN
HW7MA15JN
MK5NE15JN
KW21-24JN
KW24JN
L
Length
H
Height
W
Width
F
Bolt Spacing
M
Thread Size
T1
Tongue Width
E
Heel Height
Type
1.469
1.81
2.093
2.187
3.23
2.563
2.562
3.15
3.705
4.73
.846
.925
.925
1.313
1.575
1.574
1.141
1.550
1.781
2.115
.669
.787
.905
1.031
1.338
1.340
1.043
1.340
1.476
1.573
.787
.984
1.181
1.181
1.969
1.656
1.575
1.969
2.360
3.150
M10-1.50
M12-1.75
M12-1.75
M14-2.00
M20-2.50
M20-2.50
M16-2.00
M20-2.50
M20-2.50
M20-2.50
.471
.550
.629
.708
1.022
1.022
.826
.865
.983
.983
.295
.334
.335
.531
.669
.669
.413
.767
.748
.748
1
1
1
1
1
1
1
1
1
1
1/16 x 90° Serrated
— SOFT JAWS
Add “A” to beginning of part number when ordering aluminum jaws.
Add “P” to end of part number when ordering pointed jaws.
Made with 1018 steel or 6061 aluminum.
*Available with 1.5MM x 60° Serrations
**Parts are pointed
Ø
Diameter
5
6
6.5
Part #
AB5*
4.8SB**
GA5
GA5H
PH6
PH6H
5.5SB**
F625
F625H
PBCG6
PBCG6H
PBI6
PBI6H
GA6
GA6H
AB657*
AB657H*
AB657F*
AB657FH*
PH7
PH7H
SMW65
SMW65H
6.5SB**
6.5SBH**
PBR65
L
Length
H
Height
W
Width
B
Slot Width
F
Bolt Spacing
I
Screw Size
#
of Holes
2.375
2.19
2.50
2.50
3.125
3.125
2.62
2.76
2.76
2.00
2.00
2.625
2.625
3.25
3.25
2.75
2.75
2.75
2.75
3.25
3.25
3.50
3.50
3.19
3.19
2.50
1.00
1.12
1.50
2.00
1.50
3.00
1.12
1.50
2.25
1.25
3.00
1.50
2.50
1.50
3.00
1.50
3.00
1.50
3.00
1.50
3.00
1.50
3.00
1.50
3.00
1.50
1.00
1.00
1.00
1.00
1.25
1.25
1.00
1.50
1.50
1.25
1.25
1.75
1.75
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.00
.472
.433
.433
.433
.433
.433
.433
.669
.669
.590
.590
.669
.669
.551
.551
.551
.551
.551
.551
.551
.551
.551
.551
.551
.551
.512
.629
.750
.709
.709
.718
.718
.709
.875
.875
.813
.813
.830
.830
.866
.866
.629
.629
.650
.650
.710
.710
.984
.984
.709
.709
.709
M8
5/16
M8
M8
5/16
5/16
5/16
M12
M12
M10
M10
M12
M12
M10
M10
M10
M10
M10
M10
3/8
3/8
3/8
3/8
3/8
3/8
M8
2
2
2
2
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
2
2
3
3
2
1-800-428-1133 | Fax: 1-800-634-6480 | www.dillonmfg.com
7
1/16 x 90° Serrated
— SOFT JAWS (continued)
Add “A” to beginning of part number when ordering aluminum jaws.
Add “P” to end of part number when ordering pointed jaws.
Made with 1018 steel or 6061 aluminum.
*Available with 1.5MM x 60° Serrations
**Parts are pointed
Ø
Diameter
6.5
8
8-10
10
10-12
12
8
Part #
PBR65H
AB8859*
AB8859H*
HW12M8A
HW12M8AH
HW12M8
HW12M8H
HW12M83
HW12M83H
SMW8
SMW8H
SMW83
SMW83H
7.7SB**
7.7SBH**
PBCG8
PBCG8H
PBI8
PBI8H
PBR8
PBR8H
GA8
GA8H
AB810*
AB810H*
PH10
PH10H
F810
F810H
PH10D
PH10DH
PBCG10
PBCG10H
PBI10
PBI10H
PBR10
PBR10H
GA10
GA10H
AB1012*
SMW125
SMW125H
SMW1253
SMW1253H
F1012
F1012H
AB12*
AB12H*
PH12
PH12H
PBCG12
L
Length
H
Height
W
Width
B
Slot Width
F
Bolt Spacing
I
Screw Size
#
of Holes
2.50
3.50
3.50
3.50
3.50
3.75
3.75
4.50
4.50
3.50
3.50
4.25
4.25
3.25
3.25
2.50
2.50
3.188
3.188
3.00
3.00
4.00
4.00
4.33
4.33
4.25
4.25
3.00
3.00
4.625
4.625
3.188
3.188
4.25
4.25
3.50
3.50
4.75
4.75
4.75
4.75
4.75
5.25
5.25
4.75
4.75
5.00
5.00
5.25
5.25
4.25
2.50
1.50
4.00
1.50
4.00
2.00
4.00
2.00
4.00
2.00
4.00
2.00
4.00
1.50
3.00
2.00
3.00
2.00
2.00
1.75
3.00
2.00
4.00
1.75
4.00
2.00
3.50
2.25
3.00
2.00
4.00
2.00
3.50
2.25
4.00
2.00
3.50
2.00
4.00
2.00
2.50
4.00
2.50
4.00
2.50
5.00
2.00
4.00
2.50
4.00
2.25
1.00
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.25
1.25
1.50
1.50
1.75
1.75
1.50
1.50
1.50
1.50
1.75
1.75
1.50
1.50
1.75
1.75
1.50
1.50
1.75
1.75
2.50
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
1.75
1.75
1.75
.512
.669
.669
.669
.669
.669
.669
.669
.669
.669
.669
.669
.669
.669
.669
.669
.669
.669
.669
.669
.669
.669
.669
.827
.827
.551
.551
.669
.669
.787
.787
.669
.669
.827
.827
.827
.827
.827
.827
1.004
.827
.827
.827
.827
.827
.827
.827
.827
.787
.787
.827
.709
.906
.906
.984
.984
.984
.984
.984
.984
1.125
1.125
.875
.875
.810
.810
1.000
1.000
1.000
1.000
.875
.875
1.024
1.024
1.181
1.181
.875
.875
.875
.875
1.187
1.187
1.000
1.000
1.250
1.250
.984
.984
1.260
1.260
1.339
1.181
1.181
1.181
1.181
1.187
1.187
1.181
1.181
1.187
1.187
1.250
M8
M12
M12
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
7/16
7/16
M12
M12
M12
M12
M10
M10
M12
M12
M16
M16
3/8
3/8
M12
M12
1/2
1/2
M12
M12
M16
M16
M12
M12
M16
M16
M20
1/2
1/2
1/2
1/2
M16
M16
M16
M16
1/2
1/2
M16
2
2
2
2
2
2
2
3
3
2
2
3
3
3
3
2
2
2
2
2
2
2
2
2
2
3
3
2
2
3
3
2
2
2
2
2
2
2
2
2
2
2
3
3
2
2
2
2
3
3
2
DillonManufacturing, Inc.
Made in the USA
1/16 x 90° Serrated
— SOFT JAWS (continued)
Add “A” to beginning of part number when ordering aluminum jaws.
Add “P” to end of part number when ordering pointed jaws.
Made with 1018 steel or 6061 aluminum.
*Available with 1.5MM x 60° Serrations
Ø
Diameter
12
12-15
12.5-14
15
18
Part #
PBCG12H
PBI12
PBI12H
GA12
GA12H
F1215
F1215H
PBR14
PBR14H
PH15
PH15H
PBCG15
PBCG15H
PBI15
PBI15H
GA15
GA15H
AB16*
AB16H*
PH18
PH18H
L
Length
H
Height
W
Width
B
Slot Width
F
Bolt Spacing
I
Screw Size
#
of Holes
4.25
4.50
4.50
5.50
5.50
5.50
5.50
4.50
4.50
6.625
6.625
4.875
4.875
6.00
6.00
6.50
6.50
5.50
5.50
6.625
6.625
4.00
2.50
4.00
2.50
4.00
3.50
5.00
2.25
4.00
2.50
4.00
2.50
5.00
3.00
5.00
3.00
5.00
2.50
4.00
2.50
5.00
1.75
2.00
2.00
2.00
2.00
2.25
2.25
1.50
1.50
1.75
1.75
2.00
2.00
2.25
2.25
2.50
2.50
2.50
2.50
2.00
2.00
.827
.827
.827
.827
.827
1.001
1.001
.827
.827
.827
.827
.827
.827
1.004
1.004
1.004
1.004
.827
.827
.827
.827
1.250
1.250
1.250
1.496
1.496
1.375
1.375
1.188
1.188
1.562
1.562
1.500
1.500
1.750
1.750
1.969
1.969
1.339
1.339
1.562
1.562
M16
M16
M16
M16
M16
M20
M20
M12
M12
5/8
5/8
M16
M16
M20
M20
M20
M20
M16
M16
5/8
5/8
2
2
2
2
2
2
2
2
2
3
3
2
2
2
2
2
2
2
2
3
3
1/16 x 90° Serrated
— FULL GRIPS
Made with 356 cast aluminum.
Add “C” to beginning of part number when ordering cast iron jaws.
Add “S” to beginning of part number when ordering steel jaws.
*Available with 1.5MM x 60° Serrations
Ø
Diameter
6
6.5
8
8-10
Part #
PH6FG
PH6HFG
SMW65FG
SMW65HFG
HW12M8FG
HW12M8HFG
AB8859FG*
AB8859HFG*
PH8FG
PH8HFG
SMW8FG
SMW8HFG
PH10FG
PH10HFG
AB810FG*
AB810HFG*
H
Height
B
Slot Width
F
Bolt Spacing
1.75
4.00
1.75
4.00
2.00
4.00
2.00
4.00
2.00
4.00
2.00
4.00
2.00
4.00
2.00
4.00
.433
.433
.551
.551
.669
.669
.669
.669
.551
.551
.669
.669
.551
.551
.827
.827
.718
.718
.984
.984
.984
.984
.906
.906
.875
.875
1.125
1.125
.875
.875
1.181
1.181
I
Screw Size
5/16
5/16
3/8
3/8
1/2
1/2
M12
M12
3/8
3/8
1/2
1/2
3/8
3/8
M16
M16
1-800-428-1133 | Fax: 1-800-634-6480 | www.dillonmfg.com
#
of Holes
3
3
2
2
2
2
2
2
3
3
2
2
3
3
2
2
Casting Ø
6”
6”
6”
6”
8”
8”
8”
8”
8”
8”
8”
8”
10”
10”
10”
10”
9
1/16 x 90° Serrated
— FULL GRIPS (continued)
Made with 356 cast aluminum.
Add “C” to beginning of part number when ordering cast iron jaws.
Add “S” to beginning of part number when ordering steel jaws.
*Available with 1.5MM x 60° Serrations
Ø
Diameter
10
Part #
H
Height
B
Slot Width
F
Bolt Spacing
I
Screw Size
#
of Holes
2.00
4.00
2.00
4.00
2.375
4.00
2.375
4.00
2.375
4.00
3.00
4.00
3.00
4.00
.827
.827
.787
.787
.787
.787
.827
.827
.827
.827
.827
.827
.827
.827
1.181
1.181
1.187
1.187
1.187
1.187
1.181
1.181
1.181
1.181
1.562
1.562
1.562
1.562
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
M16
M16
5/8
5/8
5/8
5/8
2
2
3
3
3
3
3
3
2
2
3
3
3
3
SMW10FG
SMW10HFG
PH10DFG
PH10DHFG
PH12FG
PH12HFG
SMW125FG
SMW125HFG
AB12FG*
AB12HFG*
PH15FG
PH15HFG
PH18FG
PH18HFG
12
15
18
Casting Ø
10”
10”
10”
10”
12”
12”
12”
12”
12”
12”
15”
15”
18”
18”
1/16 x 90° Serrated
— HARD JAWS
Made with 1018 case hardened steel.
Hard jaws are reversible for OD & ID chucking.
All hard jaws are available in one or two step sets.
All part #’s listed below are two step sets.
*Available with 1.5MM x 60° Serrations.
Ø
Diameter
5
6
6.5
8
8.5
8-10
10
12
15
16
18
10
Part #
AB5RJ*
PH6RJ
AB657RJ*
SMW65RJ
SMW8RJ
HW12M8RJ
AB8859RJ*
AB85RJ*
AB810RJ*
PH10RJ
PH10DRJ
SMW10RJ
AB12RJ*
PH12RJ
SMW125RJ
PH15RJ
AB166-RJ*
AB16RJ*
PH18RJ
L
Length
2.28
2.50
2.57
3.00
3.50
3.50
3.25
3.25
4.125
3.00
4.125
4.25
4.80
4.125
5.25
5.375
5.90
4.75
5.375
DillonManufacturing, Inc.
H
Height
W
Width
B
Slot Width
F
Bolt Spacing
I
Screw Size
1.50
1.50
1.75
2.00
2.00
2.00
2.00
2.00
2.50
1.75
2.50
2.50
2.50
2.50
2.50
2.50
3.00
3.00
2.50
1.00
1.25
1.25
1.25
1.50
1.50
1.50
1.50
2.00
1.25
1.75
1.75
2.00
1.75
1.75
1.75
2.25
2.25
2.00
.472
.433
.551
.551
.669
.669
.669
.669
.827
.551
.787
.827
.827
.787
.827
.827
.827
.827
.827
.629
.718
.629
.875
.875
.984
.906
.906
1.181
.875
1.187
1.181
1.181
1.187
1.181
1.563
1.339
1.339
1.563
M8
5/16
M10
3/8
1/2
1/2
M12
M12
M16
3/8
1/2
1/2
M16
1/2
1/2
5/8
M16
M16
5/8
Made in the USA
1/16 x 90° Serrated
— JAW NUTS
Type 1
Ø
Diameter
5
6
6.5
8
8-10
10
10-12
16
15-18
Part #
AB5JN
PH6T
AB657JN
SMW65TN
AB8859JN
HW12M8JN
SMW8TN
AB810JN
PH10T
HW29-12.5JN
AB1012JN
AB12JN
PH12T
SMW125TN
AB16JN
PH15T
Type 2
Type 3
L
Length
H
Height
W
Width
F
Bolt Spacing
M
Thread Size
T1
Tongue Width
E
Heel Height
Type
1.181
.625
.630
.790
1.693
1.78
.910
.945
.750
1.97
1.181
2.205
1.000
1.100
.937
1.125
.590
.581
.790
1.04
.807
1.102
1.08
.984
.606
1.18
1.34
1.043
.850
1.17
.984
1.00
.669
.530
.790
.790
.748
.905
.910
1.14
.750
1.102
1.378
.984
1.00
1.10
1.14
1.00
.630
M8-1.25
5/16-18
M10-1.50
3/8-16
M12-1.75
1/2-13
1/2-13
M16-2.00
3/8-16
1/2-13
M20-2.50
M16-2.00
1/2-13
1/2-13
M16-2.00
5/8-11
.471
.432
.550
.550
.668
.668
.668
.826
.550
.826
1.003
.826
.786
.826
.826
.826
.256
.252
.300
.370
.295
.394
.370
.433
.252
.433
.590
.394
.325
.425
.430
.430
1
3
3
3
2
1
3
3
3
1
3
2
3
3
3
3
.906
.984
1.181
1.181
3/32 x 90° Serrated
— SOFT JAWS
Add “A” to beginning of part number when ordering aluminum jaws.
Add “P” to end of part number when ordering pointed jaws.
Made with 1018 steel or 6061 aluminum.
Ø
Diameter
16
16-20
Part #
400WB
400WBH
400WBXH
400WBS
400WBSH
400WBSXH
400WBSES
400WBSESH
400WBSESXH
DM4016
DM4016H
DM4216
DM4216H
32-216
32-216H
L
Length
H
Height
W
Width
B
Slot Width
F
Bolt Spacing
I
Screw Size
#
of Holes
6.75
6.75
6.75
7.50
7.50
7.50
8.50
8.50
8.50
6.25
6.25
8.00
8.00
6.25
6.25
3.50
5.00
6.00
3.50
5.00
6.00
3.50
5.00
6.00
3.00
5.00
3.00
5.00
3.50
5.00
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.001
1.001
1.001
1.001
1.004
1.004
1.750
1.750
1.750
1.500
1.500
1.500
1.500
1.500
1.500
1.563
1.563
1.563
1.563
1.375
1.375
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
2
2
2
3
3
3
3
3
3
3
3
3
3
2
2
1-800-428-1133 | Fax: 1-800-634-6480 | www.dillonmfg.com
11
3/32 x 90° Serrated
— SOFT JAWS (continued)
Add “A” to beginning of part number when ordering aluminum jaws.
Add “P” to end of part number when ordering pointed jaws.
Made with 1018 steel or 6061 aluminum.
Ø
Diameter
16-20
20
20-25
25
25-31
31.5
12
Part #
32-316
32-316H
32-216L
32-216LH
32-316L
32-316LH
DMWB23
DMWB23H
DMWB23P
DMWB23HP
AB20
AB20H
500WB
500WBH
500WBXH
500WBS
500WBSH
500WBSXH
500WBSES
500WBSESH
500WBSESXH
AB2025
AB2025H
AB24
AB24H
630WB
630WBH
630WBXH
630/265WB
630/265WBH
630/265WBXH
630/265WBS
630/265WBSH
630/265WBSXH
32-225
32-225H
32-225L
32-225LH
DM4025
DM4025H
DM4225
DM4225H
32-315
32-315H
32-315L
32-315LH
800WB
800WBH
800WBXH
L
Length
H
Height
W
Width
B
Slot Width
F
Bolt Spacing
I
Screw Size
#
of Holes
7.25
7.25
8.25
8.25
10.00
10.00
6.00
6.00
6.00
6.00
6.70
6.70
7.75
7.75
7.75
8.75
8.75
8.75
10.25
10.25
10.25
6.30
6.30
6.30
6.30
9.50
9.50
9.50
10.25
10.25
10.25
12.25
12.25
12.25
10.00
10.00
12.00
12.00
8.25
8.25
11.00
11.00
12.00
12.00
14.00
14.00
11.75
11.75
11.75
3.50
5.00
3.50
5.00
3.50
5.00
3.50
5.00
3.50
5.00
2.50
5.00
3.50
5.00
6.00
3.50
5.00
6.00
3.50
5.00
6.00
2.50
5.00
3.00
5.00
3.50
5.00
6.00
3.50
5.00
6.00
3.50
5.00
6.00
3.50
5.00
3.50
5.00
3.50
5.00
3.50
5.00
3.50
5.00
3.50
5.00
3.50
5.00
6.00
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
3.00
3.00
3.00
3.00
3.00
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
3.50
3.50
3.50
3.50
2.50
2.50
2.50
2.50
3.00
3.00
3.00
1.004
1.004
1.004
1.004
1.004
1.004
1.001
1.001
1.001
1.001
1.102
1.102
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.102
1.102
1.181
1.181
1.181
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.004
1.181
1.181
1.181
1.181
1.004
1.004
1.004
1.004
1.181
1.181
1.181
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.375
1.500
1.500
2.000
2.000
2.000
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
1.500
3.000
3.000
3.000
2.250
2.250
2.250
2.000
2.000
2.000
1.750
1.750
1.750
1.750
2.500
2.500
2.500
2.500
2.375
2.375
2.375
2.375
3.500
3.500
3.500
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
1.0
1.0
1.0
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
1.0
1.0
1.0
1.0
M20
M20
M20
M20
1.0
1.0
1.0
3
3
2
2
3
3
3
3
3
3
2
2
2
2
2
3
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
3
3
3
2
2
2
2
3
3
3
3
2
2
2
2
2
2
2
DillonManufacturing, Inc.
Made in the USA
3/32 x 90° Serrated
— HARD JAWS
Made with 1018 case hardened steel.
Hard jaws are reversible for OD & ID chucking.
All hard jaws are available in one or two step sets.
All part #’s listed below are two step sets.
Ø
Diameter
20
20-25
24+
Part #
L
Length
H
Height
W
Width
B
Slot Width
F
Bolt Spacing
I
Screw Size
5.719
5.00
5.719
6.30
3.00
3.00
3.00
3.50
2.50
2.50
2.76
3.00
1.102
1.004
1.102
1.181
1.500
1.500
1.500
1.969
M20
M20
M20
M24
AB20RJ
AB2025RJ
AB24RJ
630WBRJ
3/32 x 90° Serrated
— JAW NUTS
Type 3
Ø
Diameter
16-20
20+
25+
Part #
1620TN
AB2025JN
AB20JN
AB24JN
25TN
2540TN
L
Length
H
Height
W
Width
1.37
1.181
1.181
1.26
1.37
1.772
1.35
1.34
1.375
1.58
2.638
1.752
1.37
1.375
1.58
1.58
1.37
1.772
M
Thread Size
3/4
M20
M20
M20
3/4
1”
T1
Tongue Width
E
Heel Height
Type
1.003
1.003
1.101
1.101
1.003
1.180
.563
.590
.590
.61
.571
.728
3
3
3
3
3
3
This special hard jaw uses a
tapered angle serrated surface to
mirror the internal draft angle of
the part to be machined.
1-800-428-1133 | Fax: 1-800-634-6480 | www.dillonmfg.com
13
American Standard Tongue & Groove
— MEDIUM DUTY FLAT SOFT JAWS
Add “A” to beginning of part number when ordering aluminum jaws.
Made with 1018 steel or 6061 aluminum.
Ø
Diameter
5
6
8
10
12
15
15-36
18
24-36
Part #
DM201445
DM201439
DM20105
DM20105H
DM201447
DM201471
DM20106
DM20106H
DM201450
DM201474
DM20108
DM20108H
DM201452
DM201476
DM20110
DM20110H
DM201454
DM201478
DM20112
DM20112H
DM201456
DM201480
DM20115
DM20115H
DM201457
DM201481
DM20118
DM20118H
DM201458
DM201482
L
Length
H
Height
W
Width
B
Slot Width
F
Bolt Spacing
T
Tongue Width
I
Screw Size
2.625
2.625
2.625
2.625
2.625
2.625
3.25
3.25
3.50
3.50
3.75
3.75
4.25
4.25
4.625
4.625
4.875
4.875
5.375
5.375
5.625
5.625
6.25
6.25
5.625
5.625
6.375
6.375
5.625
5.625
1.625
3.375
1.375
3.375
1.625
3.375
1.375
3.375
1.625
3.375
1.875
3.375
1.875
3.375
1.875
3.375
2.375
3.875
2.375
3.875
2.25
3.75
2.25
3.75
2.25
4.75
2.75
4.75
3.25
4.75
1.25
1.25
1.00
1.00
1.25
1.25
1.00
1.00
1.25
1.25
1.25
1.25
1.50
1.50
1.50
1.50
1.75
1.75
1.75
1.75
2.00
2.00
1.75
1.75
2.00
2.00
2.25
2.25
2.50
2.50
.313
.313
.313
.313
.313
.313
.313
.313
.313
.313
.313
.313
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
1.250
1.250
1.250
1.250
1.500
1.500
1.500
1.500
1.750
1.750
1.750
1.750
2.125
2.125
2.125
2.125
2.500
2.500
2.500
2.500
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
.499
.499
.499
.499
.499
.499
.499
.499
.499
.499
.499
.499
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
3/4
American Standard Tongue & Groove
— MEDIUM DUTY POINTED SOFT JAWS
Add “A” to beginning of part number when ordering aluminum jaws.
Made with 1018 steel or 6061 aluminum.
Ø
Diameter
5
6
14
Part #
DM201443
DM201444
DM20105P
DM20105HP
DM201459
DM201483
L
Length
H
Height
W
Width
B
Slot Width
F
Bolt Spacing
T
Tongue Width
I
Screw Size
2.625
2.625
2.625
2.625
3.188
3.188
1.625
3.375
1.375
3.375
1.625
3.375
1.25
1.25
1.00
1.00
1.25
1.25
.313
.313
.313
.313
.313
.313
1.250
1.250
1.250
1.250
1.500
1.500
.499
.499
.499
.499
.499
.499
5/16
5/16
5/16
5/16
3/8
3/8
DillonManufacturing, Inc.
Made in the USA
American Standard Tongue & Groove
— MEDIUM DUTY POINTED SOFT JAWS (continued)
Add “A” to beginning of part number when ordering aluminum jaws.
Made with 1018 steel or 6061 aluminum.
Ø
Diameter
6
8
10
12
15
18
Part #
DM20106P
DM20106HP
DM201462
DM201486
DM20108P
DM20108HP
DM201464
DM201488
DM20110P
DM20110HP
DM201466
DM201490
DM20112P
DM20112HP
DM201468
DM201495
DM20115P
DM20115HP
DM20118P
DM20118HP
L
Length
H
Height
W
Width
B
Slot Width
F
Bolt Spacing
T
Tongue Width
I
Screw Size
3.25
3.25
3.938
3.938
3.75
3.75
4.813
4.813
4.625
4.625
5.75
5.75
5.375
5.375
7.25
7.25
6.25
6.25
6.375
6.375
1.375
3.375
1.625
3.375
1.875
3.375
1.875
3.375
1.875
3.375
2.375
3.875
2.375
3.875
2.25
3.75
2.25
3.75
2.75
4.75
1.00
1.00
1.25
1.25
1.25
1.25
1.50
1.50
1.50
1.50
1.75
1.75
1.75
1.75
2.00
2.00
1.75
1.75
2.25
2.25
.313
.313
.313
.313
.313
.313
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
1.500
1.500
1.750
1.750
1.750
1.750
2.125
2.125
2.125
2.125
2.500
2.500
2.500
2.500
3.000
3.000
3.000
3.000
3.000
3.000
.499
.499
.499
.499
.499
.499
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
3/4
3/4
Casting Ø
American Standard Tongue & Groove
— MEDIUM DUTY FULL GRIPS
Made with 356 cast aluminum.
Add “C” to beginning of part number when ordering cast iron jaws.
Add “S” to beginning of part number when ordering steel jaws.
Ø
Diameter
6
8
10
H
Height
Part #
DM6MDP
DM6MDPH
8D-6MDP
8D-6MDPH
DM8MDP
DM8MDPH
DM8MDP-6H
10D-8MDP
10D-8MDPH
DM10MDP
DM10MDPH
DM10MDP6H
12D-10MDP
12D-10MDPH
15D-10MDP
15D-10MDPH
2.00
4.00
2.00
4.00
2.00
4.00
6.00
2.00
4.00
2.00
4.00
6.00
2.375
4.00
3.00
4.00
B
Slot Width
F
Bolt Spacing
T
Tongue Width
I
Screw Size
.313
.313
.313
.313
.313
.313
.313
.313
.313
.501
.501
.501
.501
.501
.501
.501
1.500
1.500
1.500
1.500
1.750
1.750
1.750
1.750
1.750
2.125
2.125
2.125
2.125
2.125
2.125
2.125
.501
.501
.501
.501
.501
.501
.501
.501
.501
.749
.749
.749
.749
.749
.749
.749
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1-800-428-1133 | Fax: 1-800-634-6480 | www.dillonmfg.com
6”
6”
8”
8”
8”
8”
8”
10”
10”
10”
10”
10”
12”
12”
15”
15”
15
American Standard Tongue & Groove
— MEDIUM DUTY FULL GRIPS (continued)
Made with 356 cast aluminum.
Add “C” to beginning of part number when ordering cast iron jaws.
Add “S” to beginning of part number when ordering steel jaws.
Ø
Diameter
12
Part #
H
Height
DM12MDP
DM12MDPH
15D-12MDP
15D-12MDPH
18D-12MDP
18D-12MDPH
DM15MDP
DM15MDPH
18D-15MDP
18D-15MDPH
24D-15MDP
24D-15MDPH
DM18MDP
DM18MDPH
15
18
2.375
4.00
3.00
4.00
3.00
4.00
3.00
4.00
3.00
4.00
3.00
4.00
3.00
4.00
B
Slot Width
F
Bolt Spacing
T
Tongue Width
I
Screw Size
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
2.500
2.500
2.500
2.500
2.500
2.500
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
Casting Ø
12”
12”
15”
15”
18”
18”
15”
15”
18”
18”
24”
24”
18”
18”
American Standard
Tongue & Groove
— MEDIUM DUTY HARD JAWS
Made with 1018 case hardened steel.
Hard jaws are reversible for OD & ID chucking.
All hard jaws are available in one or two step sets.
All part #’s listed below are two step sets.
All hard jaws available in 3, 4 and 6 jaw sets.
Ø
Diameter
5
6
8
10
12
15
15+
20
25
16
Part #
DM5BMD
DM6MD
DM6BMD
DM8MD
DM8BMD
DM10MD
DM10BMD
DM12MD
DM12BMD
DM15MD
DM15BMD
DM15HD
DM20BMD
DM25BMD
L
Length
H
Height
W
Width
B
Slot Width
F
Bolt Spacing
T
Tongue Width
I
Screw Size
2.205
2.625
2.638
3.563
3.347
4.00
3.74
4.625
4.331
5.50
5.00
5.50
5.00
5.00
1.39
1.75
1.508
1.875
1.587
2.375
1.897
2.375
2.039
3.25
2.288
3.25
2.685
2.98
.866
1.00
.984
1.25
1.063
1.75
1.28
1.75
1.457
2.50
1.654
2.50
1.654
2.047
.313
.313
.313
.313
.313
.501
.501
.501
.501
.501
.501
.501
.501
.501
1.250
1.500
1.500
1.750
1.750
2.125
2.125
2.500
2.500
3.000
3.000
3.000
3.000
3.000
.499
.499
.499
.499
.499
.749
.749
.749
.749
.749
.749
.749
.749
.749
5/16
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
3/4
3/4
3/4
DillonManufacturing, Inc.
Made in the USA
American Standard Tongue & Groove
— HEAVY DUTY FLAT SOFT JAWS
Add “A” to beginning of part number when ordering aluminum jaws.
Made with 1018 steel or 6061 aluminum.
Ø
Diameter
6
8
10
12
15
15-36
18
18+
21
24
24-36
Part #
DM201448
DM201473
DM20206
DM20206H
DM201451
DM201475
DM20208
DM20208H
DM8WS
DM8WSH
DM201453
DM201477
DM20210
DM20210H
DM10WS
DM10WSH
DM201455
DM201479
DM20212
DM20212H
DM12WS
DM12WSH
DM20215
DM20215H
DM15WS
DM15WSH
DM201457
DM201481
DM18WS
DM18WSH
DM20218
DM20218H
DM21WS
DM21WSH
DM24WS
DM24WSH
DM201458
DM201482
L
Length
H
Height
W
Width
B
Slot Width
F
Bolt Spacing
T
Tongue Width
I
Screw Size
2.625
2.625
3.25
3.25
3.50
3.50
3.75
3.75
3.50
3.50
4.25
4.25
4.625
4.625
4.25
4.25
4.875
4.875
5.375
5.375
4.875
4.875
6.25
6.25
5.75
5.75
5.625
5.625
6.00
6.00
6.375
6.375
6.25
6.25
6.375
6.375
5.625
5.625
1.625
3.375
1.375
3.375
1.875
3.375
1.875
3.375
2.125
3.375
2.375
3.875
1.875
3.875
2.375
3.375
2.375
4.875
2.375
4.875
2.375
3.375
2.25
4.75
3.25
4.75
2.25
4.75
3.25
4.75
2.75
4.75
3.25
4.75
3.75
5.75
3.25
4.75
1.25
1.25
1.50
1.50
1.50
1.50
1.50
1.50
1.25
1.25
1.75
1.75
1.75
1.75
1.75
1.75
2.00
2.00
2.00
2.00
1.75
1.75
2.50
2.50
2.00
2.00
2.00
2.00
2.50
2.50
3.00
3.00
2.50
2.50
3.00
3.00
2.50
2.50
.313
.313
.313
.313
.313
.313
.313
.313
.313
.313
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
1.500
1.500
1.500
1.500
1.750
1.750
1.750
1.750
1.750
1.750
2.125
2.125
2.125
2.125
2.125
2.125
2.500
2.500
2.500
2.500
2.500
2.500
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
.499
.499
.499
.499
.499
.499
.499
.499
.499
.499
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
Hard jaws can be made for several
specific diameters. This special
hard jaw is designed without
serrations to avoid marring the
work piece.
1-800-428-1133 | Fax: 1-800-634-6480 | www.dillonmfg.com
17
American Standard Tongue & Groove
— HEAVY DUTY POINTED SOFT JAWS
Add “A” to beginning of part number when ordering aluminum jaws.
Made with 1018 steel or 6061 aluminum.
Ø
Diameter
6
8
10
12
15
15-36
18
18+
21
24
Part #
DM201460
DM201484
DM20206P
DM20206HP
DM201463
DM201487
DM20208P
DM20208HP
DM8WSP
DM8WSHP
DM201465
DM201489
DM20210P
DM20210HP
DM10WSP
DM10WSHP
DM201467
DM201491
DM20212P
DM20212HP
DM12WSP
DM12WSHP
DM20215P
DM20215HP
DM15WSP
DM15WSHP
DM201469
DM201496
DM201519
DM201520
DM18WSP
DM18WSHP
DM20218P
DM20218HP
DM21WSP
DM21WSHP
DM24WSP
DM24WSHP
L
Length
H
Height
W
Width
B
Slot Width
F
Bolt Spacing
T
Tongue Width
I
Screw Size
3.188
3.188
3.25
3.25
3.938
3.938
3.75
3.75
3.50
3.50
4.813
4.813
4.625
4.625
4.25
4.25
5.75
5.75
5.375
5.375
4.875
4.875
6.25
6.25
5.75
5.75
7.25
7.25
7.25
7.25
6.00
6.00
6.375
6.375
6.25
6.25
6.375
6.375
1.625
3.375
1.375
3.375
1.875
3.375
1.875
3.375
2.125
3.375
2.375
3.875
1.875
3.875
2.375
3.375
2.375
3.875
2.375
4.875
2.375
3.375
2.25
4.75
3.25
4.75
2.25
3.75
3.25
4.75
3.25
4.75
2.75
4.75
3.25
4.75
3.75
5.75
1.25
1.25
1.50
1.50
1.50
1.50
1.50
1.50
1.25
1.25
1.75
1.75
1.75
1.75
1.75
1.75
2.00
2.00
2.00
2.00
1.75
1.75
2.50
2.50
2.00
2.00
2.00
2.00
2.50
2.50
2.50
2.50
3.00
3.00
2.50
2.50
3.00
3.00
.313
.313
.313
.313
.313
.313
.313
.313
.313
.313
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
1.500
1.500
1.500
1.500
1.750
1.750
1.750
1.750
1.750
1.750
2.125
2.125
2.125
2.125
2.125
2.125
2.500
2.500
2.500
2.500
2.500
2.500
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
.499
.499
.499
.499
.499
.499
.499
.499
.499
.499
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
Extended length hard jaw built to grip
small to medium diameters. Three
locating diameters. Combined with the
extra hole the jaw allows the machinist
flexibility and quick part change over.
18
DillonManufacturing, Inc.
Made in the USA
American Standard Tongue & Groove
— HEAVY DUTY FULL GRIPS
Made with 356 cast aluminum.
Add “C” to beginning of part number when ordering cast iron jaws.
Add “S” to beginning of part number when ordering steel jaws.
Ø
Diameter
6
8
10
12
15+
18
H
Height
Part #
DM6HDP
DM6HDPH
8D-6HDP
8D-6HDPH
DM8HDP
DM8HDPH
DM8HDP-6H
10D-8HDP
10D-8HDPH
DM10HDP
DM10HDPH
DM10HDP-6H
12D-10HDP
12D-10HDPH
DM12HDP
DM12HDPH
15D-12HDP
15D-12HDPH
18D-12HDP
18D-12HDPH
DM15HDP
DM15HDPH
18D-15HDP
18D-15HDPH
24D-15HDP
24D-15HDPH
DM18HDP
DM18HDPH
2.00
4.00
2.00
4.00
2.00
4.00
6.00
2.00
4.00
2.00
4.00
6.00
2.375
4.00
2.375
4.00
3.00
4.00
3.00
4.00
3.00
4.00
3.00
4.00
3.00
4.00
3.00
4.00
B
Slot Width
F
Bolt Spacing
T
Tongue Width
I
Screw Size
.313
.313
.313
.313
.313
.313
.313
.313
.313
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
.501
1.500
1.500
1.500
1.500
1.750
1.750
1.750
1.750
1.750
2.125
2.125
2.125
2.125
2.125
2.500
2.500
2.500
2.500
2.500
2.500
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
.499
.499
.499
.499
.499
.499
.499
.499
.499
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
.749
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
Casting Ø
6”
6”
8”
8”
8”
8”
8”
10”
10”
10”
10”
10”
12”
12”
12”
12”
15”
15”
18”
18”
15”
15”
18”
18”
24”
24”
18”
18”
American Standard
Tongue & Groove
— HEAVY DUTY HARD JAWS
Made with 1018 case hardened steel.
Hard jaws are reversible for OD & ID chucking.
All hard jaws are available in one or two step sets.
All part #’s listed below are two step sets.
All hard jaws available in 3, 4 and 6 jaw sets.
Ø
Diameter
6
8
10
12
15+
Part #
DM6HD
DM8HD
DM10HD
DM12HD
DM15HD
L
Length
H
Height
W
Width
B
Slot Width
F
Bolt Spacing
T
Tongue Width
I
Screw Size
2.625
3.563
4.00
4.625
5.50
1.75
1.875
2.375
2.375
3.25
1.00
1.25
1.75
1.75
2.50
.313
.313
.501
.501
.501
1.500
1.750
2.125
2.500
3.000
.499
.499
.749
.749
.749
7/16
1/2
5/8
5/8
3/4
1-800-428-1133 | Fax: 1-800-634-6480 | www.dillonmfg.com
19
Metric Tongue & Groove
— SOFT JAWS STANDARD
Add “A” to beginning of part number when ordering aluminum jaws.
Add “P” to end of part number when ordering pointed jaws.
Made with 1018 steel or 6061 aluminum.
Ø
Diameter
140-160MM
175MM
200MM
250-315MM
400MM
500-630MM
Part #
L
Length
DMK140
DMK175
DMK175H
DMK175-1W
DMK175-1WH
DMK200
DMK200H
DMK200-1.25W
DMK200-1.25WH
DMK250
DMK250H
DMK250-1.5W
DMK250-1.5WH
DMK400
DMK400H
DMK400-1.75W
DMK400-1.75WH
DMK400-2W
DMK400-2WH
DMK500
DMK500H
DMK500-2W
DMK500-2WH
DMK500-2.5W
DMK500-2.5WH
2.75
3.375
3.375
3.375
3.375
4.125
4.125
4.125
4.125
5.00
5.00
5.00
5.00
5.719
5.719
5.719
5.719
5.719
5.719
7.063
7.063
7.063
7.063
7.063
7.063
H
Height
1.50
1.625
2.875
1.625
2.875
1.875
3.375
1.875
3.375
2.00
3.375
2.00
3.375
2.25
3.75
2.25
3.75
2.25
3.75
3.00
4.75
3.00
4.75
3.00
4.75
W
Width
B
Slot Width
F
Bolt Spacing
T
Tongue Width
I
Screw Size
.75
.75
.75
1.00
1.00
1.00
1.00
1.25
1.25
1.25
1.25
1.50
1.50
1.50
1.50
1.75
1.75
2.00
2.00
1.75
1.75
2.00
2.00
2.50
2.50
.313
.313
.313
.313
.313
.393
.393
.393
.393
.472
.472
.472
.472
.472
.472
.472
.472
.472
.472
.709
.709
.709
.709
.709
.709
1.260
1.260
1.260
1.260
1.260
1.575
1.575
1.575
1.575
1.575
1.575
1.575
1.575
2.126
2.126
2.126
2.126
2.126
2.126
2.362
2.362
2.362
2.362
2.362
2.362
.708
.708
.708
.708
.708
.787
.787
.787
.787
.787
.787
.787
.787
1.023
1.023
1.023
1.023
1.023
1.023
1.181
1.181
1.181
1.181
1.181
1.181
M8
M8
M8
M8
M8
M8
M8
M8
M8
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M16
M16
M16
M16
M16
M16
Metric Tongue & Groove
— SOFT JAWS EXTRA WIDE
Add “A” to beginning of part number when ordering aluminum jaws.
Add “P” to end of part number when ordering pointed jaws.
Made with 1018 steel or 6061 aluminum.
Ø
Diameter
140-175MM
200MM
250MM
315MM
400MM
500MM
630MM
20
Part #
DMKB140
DMKB200
DMKB250
DMKB315
DMKB400
DMKB500
DMKB630
L
Length
H
Height
W
Width
B
Slot Width
F
Bolt Spacing
T
Tongue Width
I
Screw Size
2.50
2.75
3.50
3.50
4.00
5.125
6.00
1.50
1.50
2.375
2.375
2.50
3.00
3.00
1.50
1.75
2.25
3.00
3.00
3.50
4.00
.313
.393
.472
.472
.472
.709
.709
1.260
1.575
1.575
1.575
2.126
2.362
2.362
.708
.787
.787
.787
1.023
1.181
1.181
M8
M8
M12
M12
M12
M16
M16
DillonManufacturing, Inc.
Made in the USA
Metric Tongue & Groove
— FULL GRIPS
Made with 356 cast aluminum.
Add “C” to beginning of part number when ordering cast iron jaws.
Add “S” to beginning of part number when ordering steel jaws.
Ø
Diameter
140-175MM
200MM
250MM
315MM
400MM
500MM
630MM
H
Height
Part #
DMK140FG
DMK140HFG
DMK200FG
DMK200HFG
DMK250FG
DMK250HFG
DMK315FG
DMK315HFG
DMK400FG
DMK400HFG
DMK500FG
DMK500HFG
DMK630FG
DMK630HFG
1.75
4.00
2.00
4.00
2.00
4.00
2.375
4.00
3.00
4.00
3.00
4.00
3.00
4.00
B
Slot Width
F
Bolt Spacing
T
Tongue Width
I
Screw Size
.313
.313
.393
.393
.472
.472
.472
.472
.472
.472
.709
.709
.709
.709
1.260
1.260
1.575
1.575
1.575
1.575
1.575
1.575
2.126
2.126
2.362
2.362
2.362
2.362
.708
.708
.787
.787
.787
.787
.787
.787
1.023
1.023
1.181
1.181
1.181
1.181
M8
M8
M8
M8
M12
M12
M12
M12
M12
M12
M16
M16
M16
M16
Casting Ø
6”
6”
8”
8”
10”
10”
12”
12”
15”
15”
21”
21”
24”
24”
Metric Tongue & Groove
— HARD JAWS
Made with 1018 case hardened steel.
Hard jaws are reversible for OD & ID chucking.
All hard jaws are available in one or two step sets.
All part #’s listed below are two step sets.
Ø
Diameter
140-175MM
200MM
250-315MM
400MM
500-630MM
Part #
DMK140RJ
DMK200RJ
DMK250RJ
DMK400RJ
DMK500RJ
L
Length
H
Height
W
Width
B
Slot Width
F
Bolt Spacing
T
Tongue Width
I
Screw Size
2.50
2.50
3.00
4.134
5.118
1.625
1.625
1.625
2.50
3.00
1.00
1.00
1.25
1.50
1.75
.313
.393
.472
.472
.709
1.260
1.575
1.575
2.126
2.362
.708
.787
.787
1.023
1.181
M8
M8
M12
M12
M16
Monoblock Jaws
Ø
Diameter
Part #
L
Length
H
Height
W
Width
140MM
160-175MM
200MM
250MM
315MM
400MM
500MM
630MM
UVB140
UVB160
UVB200
UVB250
UVB315
UVB400
UVB500
UVB630
2.283
2.559
3.307
3.898
4.764
5.827
6.890
9.055
2.185
2.165
2.559
3.307
3.543
3.937
4.882
5.276
.787
.787
.866
1.024
1.260
1.260
1.772
1.772
1-800-428-1133 | Fax: 1-800-634-6480 | www.dillonmfg.com
V
Height From Chuck Face
1.378
1.378
1.575
2.165
2.205
2.598
3.031
3.425
21
Metric Tongue & Groove
— BASE JAWS
Ø
Diameter
Part #
L
Length
H
Height
W
Width
F
Bolt Spacing
T
Tongue Width
140MM
160-175MM
200MM
250MM
315MM
400MM
500MM
630MM
GBK140
GBK160
GBK200
GBK250
GBK315
GBK400
GBK500
GBK630
2.205
2.559
3.346
4.094
4.528
4.921
6.299
7.992
1.083
1.181
1.260
1.575
1.811
1.811
2.402
2.402
.787
.787
.866
1.024
1.260
1.260
1.772
1.772
1.260
1.260
1.575
1.575
1.575
2.126
2.362
2.362
.315
.315
.394
.472
.472
.472
.709
.709
S
Key Slot Width
.709
.709
.787
.787
.787
1.024
1.181
1.181
Acme Serrated Key Type
— SOFT JAWS
Add “A” to beginning of part number when ordering aluminum jaws.
Add “P” to end of part number when ordering pointed jaws.
Made with 1018 steel or 6061 aluminum.
Ø
Diameter
8
10
12
15-18
21-24
22
Part #
DM13068
DM13068H
DM13068-4H
DM13072
DM13602
DM13072-4.5L
DM13602-4.5L
DM13605
DM13606
DM13605-6L
DM13606-6L
DM13071
DM13607
DM13609
DM13610
DM13609-5.5L
DM13610-5.5L
DM13609-6L
DM13610-6L
DM13070
DM13611
DM13070L
DM13611L
DM13070-6.5L
DM13611-6.5L
DM13070-7.5L
DM13611-7.5L
DM13069
DM13618
L
Length
H
Height
W
Width
F
Bolt Spacing
T
Tongue Width
3.75
3.75
3.75
4.125
4.125
4.50
4.50
5.625
5.625
6.00
6.00
4.125
4.125
5.125
5.125
5.50
5.50
6.00
6.00
6.00
6.00
3.125
3.125
6.50
6.50
7.50
7.50
6.00
6.00
2.00
3.50
4.00
2.313
3.813
2.313
3.813
2.313
3.813
2.313
3.813
2.313
3.813
2.313
3.813
2.313
3.813
2.313
3.813
3.25
4.75
3.25
4.75
3.25
4.75
3.25
4.75
3.25
4.75
1.50
1.50
1.50
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
3.00
3.00
1.250
1.250
1.250
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.000
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
3.000
3.000
.669
.669
.669
.749
.749
.749
.749
.749
.749
.749
.749
.874
.874
.874
.874
.874
.874
.874
.874
.999
.999
.999
.999
.999
.999
.999
.999
1.249
1.249
DillonManufacturing, Inc.
I
M
S
Key Slot Width Screw Size Thread Size
.601
.601
.601
1.031
1.031
1.031
1.031
1.031
1.031
1.031
1.031
1.031
1.031
1.031
1.031
1.031
1.031
1.031
1.031
1.531
1.531
1.531
1.531
1.531
1.531
1.531
1.531
1.531
1.531
Made in the USA
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
10-24
10-24
10-24
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
Acme Serrated Key Type
— FULL GRIPS
Made with 356 cast aluminum.
Add “C” to beginning of part number when ordering cast iron jaws.
Add “S” to beginning of part number when ordering steel jaws.
Ø
Diameter
8
10
12
15
21
Part #
DM13068FG
DM13068HFG
DM13072FG
DM13072HFG
DM13605FG
DM13605HFG
DM13071FG
DM13071HFG
DM13070FG
DM13070HFG
DM13069FG
DM13069HFG
H
Height
F
Bolt Spacing
2.00
4.00
2.00
4.00
2.375
4.00
2.375
4.00
3.00
4.00
3.00
4.00
1.250
1.250
1.750
1.750
1.750
1.750
2.000
2.000
2.500
2.500
3.000
3.000
S
T
Tongue Width Key Slot Width
.669
.669
.749
.749
.749
.749
.874
.874
.999
.999
1.249
1.249
I
Screw Size
.601
.601
1.031
1.031
1.031
1.031
1.031
1.031
1.531
1.531
1.531
1.531
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
3/4
3/4
7/8
7/8
M
Thread Size Casting Ø
10-24
10-24
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
3/8-16
8”
8”
10”
10”
12”
12”
12”
12”
15”
15”
21”
21”
Acme Serrated Key Type
— HARD JAWS
Made with 1018 case hardened steel.
Hard jaws are reversible for OD & ID chucking.
All hard jaws are available in one or two step sets.
All part #’s listed below are two step sets.
Ø
Diameter
8
10
12
15-18
21-24
Part #
L
Length
H
Height
DM13068RJ
DM13072RJ
DM13071RJ
DM13070RJ
DM13069RJ
3.75
4.75
5.125
6.00
6.00
2.00
2.313
2.313
3.25
3.25
W
Width
F
Bolt Spacing
T
Tongue Width
1.50
1.75
1.75
2.50
3.00
1.250
1.750
2.000
2.500
3.000
.669
.749
.874
.999
1.249
S
I
M
Key Slot Width Screw Size Thread Size
.601
1.031
1.031
1.531
1.531
1/2
1/2
5/8
3/4
7/8
10-24
5/16-18
5/16-18
3/8-16
3/8-16
Acme Serrated Key Type
— JAW NUTS
Ø
Diameter
8
10
12
15
21-24
Part #
L
Length
H
Height
W
Width
DM8JNA
DM10JNA
DM12JNA
DM15JNA
DM21JNA
2.00
2.50
3.00
3.50
4.25
1.00
.640
.745
.931
1.187
1.03
.940
1.06
1.25
1.56
F
Bolt Spacing
1.250
1.750
2.000
2.500
3.000
M
Thread Size
1/2-13
1/2-13
5/8-11
3/4-10
7/8-9
1-800-428-1133 | Fax: 1-800-634-6480 | www.dillonmfg.com
T1
Tongue Width
.668
.678
.802
.930
1.159
E
Heel Height
.440
.381
.440
.550
.684
23
Acme Serrated Key Type
— ACME SERRATED MASTER KEYS
Ø
Diameter
8
10-12
15-18
21-24
Part #
L
Length
H
Height
W
Width
DM8AK
DM12AK
DM15AK
DM21AK
1.50
1.687
2.437
2.875
.383
.500
.500
.500
.600
1.030
1.530
1.530
I
Screw Size
P
Pitch
10-24
5/16
3/8
3/8
5/32
1/4
1/4
1/4
A
Slot Depth
.13
.13
.13
.13
Square Serrated Key Type
— SOFT JAWS
Add “A” to beginning of part number when ordering aluminum jaws.
Add “P” to end of part number when ordering pointed jaws.
Made with 1018 steel or 6061 aluminum.
Ø
Diameter
8
10
10-12
12
15
24
Part #
DM204570
DM204002
DM204001
DM204003
DM204007
DM204008
DM204009
DM204010
DM204011
DM204012
DM204571
DM215806
DM204015
DM204016
DM204019
DM204020
DM215813
DM215814
DM204021
DM204022
DM215815
DM215816
DM204023
DM204024
DM204572
DM215818
DM215823
DM215824
DM204025
DM204026
L
Length
H
Height
W
Width
B
Slot Width
F
Bolt Spacing
3.00
3.00
3.00
3.00
3.437
3.437
4.313
4.313
4.00
4.00
4.00
4.00
4.937
4.937
5.50
5.50
5.50
5.50
5.50
5.50
5.00
5.00
6.00
6.00
5.00
5.00
6.813
6.813
6.25
6.25
2.00
3.00
2.25
3.00
1.75
3.00
2.00
4.00
2.25
4.00
2.25
4.00
2.25
4.00
2.50
4.00
2.50
4.00
2.50
4.00
2.50
4.00
2.50
4.00
3.00
5.00
3.00
5.00
3.00
5.00
1.25
1.25
2.00
2.00
1.50
1.50
1.75
1.75
2.00
2.00
1.75
1.75
1.75
1.75
2.00
2.00
2.00
2.00
2.00
2.00
1.75
1.75
2.25
2.25
2.25
2.25
2.25
2.25
2.25
2.25
.501
.501
.501
.501
.751
.751
.751
.751
.626
.626
.751
.751
.751
.751
.751
.751
.751
.751
.751
.751
.751
.751
1.001
1.001
1.001
1.001
1.001
1.001
1.001
1.001
1.438
1.438
1.250
1.250
1.438
1.438
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
2.500
2.500
2.500
2.500
2.500
2.500
2.500
2.500
DillonManufacturing, Inc.
S
I
M
Key Slot Width Screw Size Thread Size
.746
.746
.625
.625
.746
.746
.996
.996
.751
.751
.996
.996
.996
.996
.996
.996
.996
.996
.996
.996
.996
.996
1.488
1.488
1.488
1.488
1.488
1.488
1.488
1.488
Made in the USA
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
1/4-20
1/4-20
N/A
N/A
1/4-20
1/4-20
5/16-18
5/16-18
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
Square Serrated Key Type
— SOFT JAWS (continued)
Add “A” to beginning of part number when ordering aluminum jaws.
Add “P” to end of part number when ordering pointed jaws.
Made with 1018 steel or 6061 aluminum.
Ø
Diameter
18
21-24
24-32
28-36
Part #
DM204027
DM204028
DM204029
DM204030
DM215825
DM215826
DM204031
DM204032
DM204033
DM204034
DM204035
DM204036
DM204037
DM204038
L
Length
H
Height
W
Width
B
Slot Width
F
Bolt Spacing
5.00
5.00
6.00
6.00
5.00
5.00
5.00
5.00
6.25
6.25
6.00
6.00
6.50
6.50
3.00
5.00
3.00
5.00
3.00
5.00
3.00
5.00
3.00
5.00
3.00
5.00
3.50
5.00
2.50
2.50
2.50
2.50
2.25
2.25
2.50
2.50
2.50
2.50
2.50
2.50
3.00
3.00
1.001
1.001
1.001
1.001
1.001
1.001
1.001
1.001
1.001
1.001
1.001
1.001
1.188
1.188
2.500
2.500
2.500
2.500
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
S
I
M
Key Slot Width Screw Size Thread Size
1.488
1.488
1.488
1.488
1.488
1.488
1.488
1.488
1.488
1.488
1.488
1.488
1.532
1.532
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
3/8-16
Square Serrated Key Type
— FULL GRIPS
Made with 356 cast aluminum.
Add “C” to beginning of part number when ordering cast iron jaws.
Add “S” to beginning of part number when ordering steel jaws.
Ø
Diameter
8
10
12
15
18
H
Height
Part #
DM8ARFG
DM8ARHFG
DM204007FG
DM204008FG
DM10ARFG
DM10ARHFG
DM10ARFG58
DM10ARHFG58
DM12ARFG
DM12ARHFG
DM12ARFG58
DM12ARHFG58
DM15ARFG
DM15ARHFG
DM18ARFG
DM18ARHFG
2.00
4.00
2.00
4.00
2.00
4.00
2.00
4.00
2.375
4.00
2.375
4.00
3.00
4.00
3.00
4.00
B
Slot Width
.501
.501
.751
.751
.751
.751
.751
.751
.751
.751
.751
.751
1.001
1.001
1.001
1.001
F
S
Bolt Spacing Key Slot Width
1.438
1.438
1.438
1.438
1.750
1.750
1.750
1.750
1.750
1.750
1.750
1.750
2.500
2.500
2.500
2.500
.746
.746
.746
.746
.996
.996
.996
.996
.996
.996
.996
.996
1.488
1.488
1.488
1.488
I
Screw Size
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
1/2
1/2
5/8
5/8
3/4
3/4
3/4
3/4
1-800-428-1133 | Fax: 1-800-634-6480 | www.dillonmfg.com
M
Thread Size Casting Ø
1/4-20
1/4-20
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
3/8-16
8”
8”
8”
8”
10”
10”
10”
10”
12”
12”
12”
12”
15”
15”
15”
15”
25
Square Serrated Key Type
— HARD JAWS
Made with 1018 case hardened steel.
Hard jaws are reversible for OD & ID chucking.
All hard jaws are available in one or two step sets.
All part #’s listed below are two step sets.
Ø
Diameter
8
10
12
15-18
21-24
28-36
Part #
L
Length
H
Height
W
Width
B
Slot Width
F
Bolt Spacing
3.75
3.781
3.781
4.75
6.00
6.50
2.00
2.50
2.50
3.00
3.50
3.50
1.50
1.75
1.75
2.25
2.50
3.00
.751
.751
.751
1.001
1.001
1.188
1.438
1.750
1.750
2.500
3.000
3.000
DM204007RJ
DM12AR
DM12AR58
DM18AR
DM21AR
DM28AR
S
I
M
Key Slot Width Screw Size Thread Size
.746
.996
.996
1.488
1.488
1.532
1/2
1/2
5/8
3/4
3/4
7/8
1/4-20
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
Square Serrated Key Type
— JAW NUTS
Ø
Diameter
8
10-12
12
15-18
21-24
28-36
Part #
DM8CCJ
DM10/12CCJ
DM12CCJ
DM15/18JN
DM21CCJ
DM28CCJ
L
Length
H
Height
W
Width
2.11
2.44
2.50
3.75
4.50
4.50
.996
1.000
1.000
1.250
1.250
1.750
.993
1.000
1.000
1.250
1.250
1.562
F
Bolt Spacing
M
Thread Size
1.440
1.750
1.750
2.500
3.000
3.000
1/2-13
1/2-13
5/8-11
3/4-10
3/4-10
7/8-9
T1
Tongue Width
.745
.750
.750
1.000
1.000
1.187
E
Heel Height
.376
.375
.375
.438
.438
.628
Square Serrated Key Type
— SQUARE SERRATED MASTER KEYS
Ø
Diameter
Ø
8Diameter
10-12
15
18
21-24
28-36
26
Part #
DM8CCA
DM8SQK
DM12SQK
DM15SQK
DM18SQK
DM21SQK
DM28SQK
L
Length
H
Height
W
Width
T
Tongue Width
I
Screw Size
P
Pitch
A
Slot Depth
1.406
1.313
1.688
2.00
2.25
2.50
2.50
.435
.375
.500
.500
.500
.500
.500
.744
.744
.995
1.487
1.487
1.487
1.531
.075
.098
.124
.124
.124
.124
.124
1/4
1/4
5/16
3/8
3/8
3/8
3/8
.155
.200
.250
.250
.250
.250
.250
.101
.101
.130
.130
.130
.130
.130
DillonManufacturing, Inc.
Made in the USA
Pin Location Type
Pin Location Type
— NORTHFIELD TYPE SOFT JAWS
— NORTHFIELD TYPE FULL GRIPS
Add “A” to beginning of part number when ordering aluminum jaws.
Made with 1018 steel or 6061 aluminum.
Add “S” to beginning of part number when ordering steel jaws.
Made with 2024, 6061 aluminum or 1018 steel.
Ø
Diameter
4
6
7
8
10
12
Part #
L
Length
H
Height
NL-1-4-.75
NL-1-4-1.5
NL-1-4-2
NL-1-4-3
NL-1-6-1
NL-1-6-1.5
NL-1-6-2
NL-1-6-3
NL-1-7-2
NL-1-7-3
NL-1-7-4
NL-1-8-2
NL-1-8-3
NL-1-8-4
NL-1-10-2
NL-1-10-3
NL-1-10-4
NL-1-12-3
NL-1-12-4
NL-1-12-5
1.897
1.897
1.897
1.897
2.897
2.897
2.897
2.897
3.187
3.187
3.187
3.687
3.687
3.687
4.687
4.687
4.687
5.499
5.499
5.499
.750
1.50
2.00
3.00
1.00
1.50
2.00
3.00
2.00
3.00
4.00
2.00
3.00
4.00
2.00
3.00
4.00
3.00
4.00
5.00
W
Width
.75
.75
.75
.75
1.00
1.00
1.00
1.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
3.00
3.00
3.00
Ø
Diameter
4
6
7
8
10
Part #
NL-4-1
NL-4-2
NL-4-3
NL-6-1
NL-6-1.5
NL-6-2
NL-6-3
NL-7-2
NL-7-3
NL-7-4
NL-8-2
NL-8-3
NL-8-4
NL-10-2
NL-10-3
NL-10-4
H
Height
1.00
2.00
3.00
1.00
1.50
2.00
3.00
2.00
3.00
4.00
2.00
3.00
4.00
2.00
3.00
4.00
Pin Location Type
Pin Location Type
— MICROCENTRIC TYPE SOFT JAWS
— MICROCENTRIC TYPE FULL GRIPS
Add “A” to beginning of part number when ordering aluminum jaws.
Made with 1018 steel or 6061 aluminum.
Add “S” to beginning of part number when ordering steel jaws.
Made with 2024, 6061 aluminum or 1018 steel.
Ø
Diameter
4
6
8
10
Part #
L
Length
H
Height
MC-1-4-1
MC-1-4-1.5
MC-1-4-2
MC-1-6-1
MC-1-6-1.5
MC-1-6-2
MC-1-6-3
MC-1-8-2
MC-1-8-3
MC-1-8-4
MC-1-10-2
MC-1-10-3
1.93
1.93
1.93
2.955
2.955
2.955
2.955
3.743
3.743
3.743
4.743
4.743
1.00
1.50
2.00
1.00
1.50
2.00
3.00
2.00
3.00
4.00
2.00
3.00
W
Width
.75
.75
.75
1.00
1.00
1.00
1.00
1.50
1.50
1.50
1.50
1.50
Ø
Diameter
4
6
8
10
12
Part #
MC-4-1
MC-4-2
MC-4-3
MC-6-1.5
MC-6-2
MC-6-3
MC-8-2
MC-8-3
MC-8-4
MC-10-2
MC-10-3
MC-10-4
MC-12-2
MC-12-3
1-800-428-1133 | Fax: 1-800-634-6480 | www.dillonmfg.com
H
Height
1.00
2.00
3.00
1.50
2.00
3.00
2.00
3.00
4.00
2.00
3.00
4.00
2.00
3.00
27
New Britain Soft Jaws
Add “A” to beginning of part number when ordering aluminum jaws.
Add “P” to end part number when ordering pointed jaws.
Made with 1018 steel or 6061 aluminum.
Ø
Diameter
5 7/8
6 3/4
7 1/2
Part #
L
Length
H
Height
W
Width
DM5NB
DM6NB
DM7NB
2.625
3.00
3.375
1.875
2.375
2.375
2.00
2.50
2.50
F
Bolt Spacing
T
Tongue Width
1.000
1.250
1.438
.499
.374
.374
F2
S
I
Bolt Spacing 2 Key Slot Width Screw Size
N/A
1.000
1.063
.376
.376
.376
3/8
3/8
1/2
Howa HO18 Soft Jaws
Add “A” to beginning of part number when ordering aluminum jaws.
Made with 1018 steel or 6061 aluminum.
Ø
Diameter
8
10
12
15
Part #
HW18M8
HW18M10
HW18M12
HW18M15
L
Length
H
Height
W
Width
B
Slot Width
F
Bolt Spacing
S
Key Slot Width
I
Screw Size
3.94
4.33
5.12
6.30
1.50
1.75
2.00
2.50
1.25
1.25
1.50
1.50
.551
.630
.630
.630
1.260
1.339
1.575
2.165
.630
.630
.787
.984
M10
M12
M12
M12
Bullard Jaws
Add “A” to beginning of part number for aluminum jaws.
Made with 1018 steel or 6061 aluminum.
Hard jaws made with 1018 case hardened steel.
Ø
Diameter
L
Length
H
Height
W
Width
F
Bolt Spacing
S
Key Slot Width
I
Screw Size
DMBUL36
6.625
4.00
3.00
3.250
.626
7/8
DMBUL36RJ
DMBUL36RJ4
6.625
6.625
4.00
4.00
3.00
3.00
3.250
3.250
.626
.626
7/8
7/8
Part #
Soft Jaws
36+
Hard Jaws
36+
28
DillonManufacturing, Inc.
Made in the USA
Buck Jaws
Add “A” to beginning of part number for aluminum jaws.
Add “P” to end part number when ordering pointed jaws.
Made with 1018 steel or 6061 aluminum.
Hard jaws made with 1018 case hardened steel.
Hard jaws are reversible for OD & ID chucking.
All hard jaws are available in one or two step sets.
All part #’s listed below are two step sets.
Ø
Diameter
L
Length
H
Height
W
Width
B
Slot Width
F
Bolt Spacing
S
Key Slot Width
I
Screw Size
DM1050
DM1105
3.00
3.188
2.00
2.00
1.00
1.25
.741
.866
1.688
1.688
.375
.375
5/16
5/16
DM1050RJ
2.531
1.50
1.00
.741
1.688
.375
5/16
I
Screw Size
Casting Ø
Part #
Soft Jaws
6
7.5
Hard Jaws
6
Buck Full Grips
Made with 356 cast aluminum.
Add “C” to beginning of part number when ordering cast iron jaws.
Add “S” to beginning of part number when ordering steel jaws.
Ø
Diameter
6
Part #
H
Height
B
Slot Width
1.75
.741
DM1050FG
F
Bolt Spacing
1.688
S
Key Slot Width
.375
5/16
6
Samchully HC32-40
Ø
Diameter
B
T
F
W
F2
Width Slot Width Tongue Width Bolt Spacing Bolt Spacing 2
L
Length
H
Height
HC32SJ
DM13046310
HC40SJ
6.50
10.63
10.63
3.25
4.25
4.75
3.00
3.00
4.00
.501
1.181
1.181
.749
.749
.749
3.000
3.000
3.000
—
3.000
3.000
M20
M24
M24
2
3
3
HC40RJ
8.78
4.75
4.00
1.181
.749
4.500
—
M24
2
Part #
I
#
Screw Size of Holes
Soft Jaws
32
40
Hard Jaws
40
1-800-428-1133 | Fax: 1-800-634-6480 | www.dillonmfg.com
29
Collet Pads & Jaws
Top jaws also available for Tongue & Groove, Acme
Serrated & Square Serrated Style Chucks
Ø
Diameter
6”
8’’
10’’
12’’
15’’
Part #
KT6-09
KT6-07
KT8-09
KT8-07
KT8-08
KT10-09
KT10-07
KT10-08
KT10-04
KT12-09
KT12-07
KT12-08
KT12-04
KT212-09
KT212-07
KT212-08
KT212-04
KT15-09
KT15-07
KT15-08
KT15-04
KT15-15
L
H
Length Height
2.35
2.30
3.70
3.15
2.90
4.50
4.00
3.80
3.70
5.50
5.12
4.90
4.50
5.50
5.12
4.90
4.50
7.00
6.625
6.40
6.00
5.50
2.50
2.50
2.50
3.00
3.00
2.50
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
W
Width
B
Slot Width
1.25
1.25
1.50
1.50
1.50
1.50
1.50
1.50
1.50
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.50
2.50
2.50
2.50
2.50
.472
.472
.551
.551
.551
.630
.630
.630
.630
.709
.709
.709
.709
.827
.827
.827
.827
.866
.866
.866
.866
.866
I
F
Bold Spacing Screw Size
.787
.787
.984
.984
.984
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.181
1.690
1.690
1.690
1.690
1.690
M10
M10
M12
M12
M12
M12
M12
M12
M12
M14
M14
M14
M14
M16
M16
M16
M16
M20
M20
M20
M20
M20
P
Pitch
Pad #
Pad
Ø
Pad
T
Pad
H
1.5MM x 60°
1.5MM x 60°
1.5MM x 60°
1.5MM x 60°
1.5MM x 60°
1.5MM x 60°
1.5MM x 60°
1.5MM x 60°
1.5MM x 60°
1.5MM x 60°
1.5MM x 60°
1.5MM x 60°
1.5MM x 60°
1.5MM x 60°
1.5MM x 60°
1.5MM x 60°
1.5MM x 60°
1.5MM x 60°
1.5MM x 60°
1.5MM x 60°
1.5MM x 60°
1.5MM x 60°
09
07
09
07
08
09
07
08
04
09
07
08
04
09
07
08
04
09
07
08
04
15
1.875
2.375
1.875
2.375
3.000
1.875
2.375
3.000
3.500
1.875
2.375
3.000
3.500
1.875
2.375
3.000
3.500
1.875
2.375
3.000
3.500
5.000
.435
.622
.435
.622
.622
.435
.622
.622
.622
.435
.622
.622
.622
.435
.622
.622
.622
.435
.622
.622
.622
.495
1.375
1.740
1.375
1.740
1.875
1.375
1.740
1.875
2.120
1.375
1.740
2.120
2.120
1.375
1.740
2.120
2.120
1.375
1.740
1.875
2.120
2.250
Warner & Swasey Collet Pads
Also available are Gisholt, Jones & Lamson and Martin collet pad types.
Machine # & Size
30
Part #
Master Collet #
#2, #3
#2 EC
16” EC
#4-2”
#3 - 1 3/4”
09
#5
1A
08
471-1001
1A-3”
2A-3 1/2”
06
404-1008
#5-3”
04
4669-1001
#5-4 1/2”
02 (3 Split)
05 (4 Split)
2779-1001
2A-4 1/2
3A-4 1/2”
03
533-1008
3A-6”
01
1959-7
07
DillonManufacturing, Inc.
461-1002
462-1002
1369-1008
1129-1102
1369-113
Pad #
Machine Capacity
I.D. Range
461-1003
461-1024
461-1023
1129-1004
1129-1006
1129-1005
471-1002
471-1004
471-1003
404-1009
404-1014
404-1028
4669-1165
4669-1167
4669-1166
2779-1009
2779-1011
2779-1010
533-1010
533-1016
533-1011
1959-1003
1959-1005
1959-1004
RD 1 1/2
HEX 1 5/16
SQ 1 1/16
RD 2
HEX 1 3/4
SQ 1 1/16
RD 2 1/2
HEX 2 3/16
SQ 1 3/4
RD 3 1/4
HEX 2 3/4
SQ 2 3/8
RD 3
HEX 2 5/8
SQ 2 1/8
RD 4 1/2
HEX 3 7/8
SQ 3 3/16
RD 4 1/2
HEX 3 7/8
SQ 3 3/16
RD 6
HEX 5 3/16
SQ 4 1/2
1/4 - 1 1/2
1/4 - 1 5/16
1/4 - 1 1/16
1/4 - 2
1/4 - 1 3/4
1/4 - 1 3/8
1/4 - 2 1/2
1/4 - 2 3/16
1/4 - 1 3/4
1/2 - 3 1/4
1/2 - 2 3/4
1/2 - 2 3/8
1/4 - 3
1/4 - 2 5/8
1/4 - 2 1/8
1/2 - 4 1/2
1/2 - 3 7/8
1/2 - 3 3/16
1/2 - 4 1/2
1/2 - 3 7/8
1/2 - 3 3/16
1-6
1 - 5 3/16
1 - 4 1/2
Made in the USA
S-Style Collet Pads
Also available are Gisholt, Jones & Lamson and Martin collet pad types.
Machine Model
Pad #
RD
HEX
SQ
S-12
S-15
S-15
S-16
S-20
S-22
S-26
S-35
S-40
1 1/4
1 1/2
1 1/2
1 5/8
2
2 1/4
2 5/8
3 1/2
4
1 1/16
1 9/32
1 9/32
1 11/32
1 23/32
1 15/16
2 1/4
3
3 7/16
7/8
1 1/32
1 1/32
1 1/8
1 13/16
1 9/16
1 13/16
2 15/16
2 13/16
S-15
S-20
1 1/2
2
1 9/32
1 23/32
1 1/32
1 13/16
S-12
S-15
S-16
S-20
S-22
S-26
S-30
S-35
S-40
1 1/4
1 1/2
1 5/8
2
2 1/4
2 5/8
3
3 1/2
4
1 1/16
1 9/32
1 11/32
1 17/32
1 15/16
1 27/32
2 19/32
3
3 7/16
7/8
1 1/32
1 1/8
1 13/32
1 1/8
1 27/32
2 3/32
2 15/16
2 13/16
S-16
S-20
s-26
1 5/8
2
2 5/8
1 11/16
1 17/32
1 27/32
1 1/8
1 13/32
1 27/32
S-20
S-26
2
2 5/8
1 17/32
1 17/32
1 13/16
1 27/32
S-16
1 5/8
1 13/16
1 1/8
S-12
S-15
S-16
S-20
S-22
S-26
S-35
S-40
1 1/4
1 1/2
1 5/8
2
2 1/4
2 5/8
3 1/2
4
1 1/16
1 9/32
1 13/32
1 23/32
1 13/16
2 1/4
3
3 7/16
7/8
1 1/32
1 1/8
1 13/32
1 9/16
1 27/32
2 15/16
2 13/16
S-16
1 5/8
1 13/32
1 1/8
National Acme
1 1/4R, RA-6, RB-6, RB-8, C, GA-4
1 3/8R, R-4, RA-4, RAS-4,G, GA
1 1/2 GA
1 5/8R, RA, RAS-4, RB-8, GA-4
2R, RA, RAS-4, RAS, RB-6
2 1/4 R-4, R-6, R-8, RA-6, TA-8, RL
2 5/8R, RA, RB-6, RB-8, M
3 1/2RA, RB-4, RB-6, M, MR
4RB-6, RB-8
BSA
1 1/2 #138
2 # 168
Cone
1 1/4
1 1/2
1 5/8
1 7/8 & 2
2 1/4
2 1/2, 2 5/8
3, 3 1/4
3 1/2
4
Greenlee
1 5/8 6 Spindle
2 & 2 1/4-6 Spindle
2 5/8 4-Spindle
Herbert
2 #4
2 1/2 #5, #7
Index
2 3/8-BE
New Britain
1 1/4 #52, #601, SL
1 3/8 #52, #60, #601
1 5/8, #41, #61, #62
1 3/4 & 2, #61, #415, #817
2 1/4 #61, #62
2 5/8 & 2 3/4 #26 Single Spindle #126, #626, #826
3 1/2 #635
4 #640
Traub
A-56, A-60, TB-60, TS-60
1-800-428-1133 | Fax: 1-800-634-6480 | www.dillonmfg.com
31
S-Style Collet Pads
(Continued)
Also available are Gisholt, Jones & Lamson and Martin collet pad types.
Machine Model
Pad #
RD
HEX
SQ
S-12
S-20
S-22
S-12
S-22
S-30
S-22
S-20
1 1/4
2
2 1/4
1 1/4
2 1/4
3
2 1/4
3
1 1/16
1 23/32
1 13/16
1 1/16
1 13/16
2 19/32
1 13/16
2 19/32
7/8
1 13/32
1 9/16
7/8
1 9/16
2 3/32
1 9/16
2 3/32
S-12
S-16
S-22
S-26
S-30
S-35
1 1/4
1 5/8
2 1/4
2 5/8
3
3 1/2
1 1/16
1 13/32
1 13/16
2 1/4
2 19/32
3
7/8
1 1/8
1 9/16
1 27/32
2 3/32
2 15/32
Warner and Swasey
1 1/4 6 Spindle M-3300
1 3/4 5 Spindle M-2500
2 1/4 5 Spindle M-2530
OABM-4415 (1 1/4)
1 AB M-3800
2 AB M-3925, M3380 (3’’ CAP)
1SC 5014-1006(2), 4034-1001 (2 1/4)
2 SC 5054-1003
Wickman
1 3/8 5 & 6 Spindle
1 3/4 5 & 6 Spindle
2 1/4 6 Spindle
2 5/8 1-6 Spindle
3 1/4 6 Spindle
3 1/2 Single and Multi Spindle
Hard jaws are available for
3, 4, or 6 jaw combination
chucks. These jaws include
threaded holes for rest
buttons and are reversible to
grip both I.D. and O.D.
32
DillonManufacturing, Inc.
Made in the USA
Special Serrated
— SOFT JAWS
Specifications for top jaw blanks not covered in our standard line of products.
Dillon standard tolerances will be applied unless stated otherwise.
Fax special jaw requests to: 800-634-6480
Or email prints to: sales4@dillonmfg.com
L
Length
W
Width
H
Height
B
Slot Width
F
Bolt Spacing
*Material - Steel, Aluminum, or Other
I
Screw Size
P
Pitch
# Of Holes
Required
A
G (Distance to C (Length of
Slot Depth
Hole)
Serrations)
Pointed
Y or N
Max length of serrations is 6” | Pointed jaws will have 120° included angle unless stated otherwise
Special Tongue & Groove
— SOFT JAWS
Specifications for top jaw blanks not covered in our standard line of products.
Dillon standard tolerances will be applied unless stated otherwise.
Fax special jaw requests to: 800-634-6480
Or email prints to: sales4@dillonmfg.com
L
Length
W
Width
H
Height
*Material - Steel, Aluminum, or Other
B
Slot Width
T
Tongue Width
F
Bolt Spacing
I
Screw Size
J (Distance to
Tongue)
U (Tongue
Height)
Pointed
Y or N
Pointed jaws will have 120° included angle unless stated otherwise
Return Quote to:
Name
Company
Address
City
Phone
Fax
Email
State
Zip
1-800-428-1133 | Fax: 1-800-634-6480 | www.dillonmfg.com
33
Special Acme
— SOFT JAWS
Specifications for top jaw blanks not covered in our standard line of products.
Dillon standard tolerances will be applied unless stated otherwise.
Fax special jaw requests to: 800-634-6480
Or email prints to: sales4@dillonmfg.com
L
Length
W
Width
H
Height
F
Bolt Spacing
T
Tongue Width
*Material - Steel, Aluminum, or Other
S
D
Key Slot Width Key Slot Depth
I
Screw Size
J (Distance to
Key Slot)
M
Thread Size
Pointed
Y or N
M
Thread Size
Pointed
Y or N
Pointed jaws will have 120° included angle unless stated otherwise
Special Square
— SOFT JAWS
Specifications for top jaw blanks not covered in our standard line of products.
Dillon standard tolerances will be applied unless stated otherwise.
Fax special jaw requests to: 800-634-6480
Or email prints to: sales4@dillonmfg.com
L
Length
W
Width
H
Height
F
Bold Spacing
*Material - Steel, Aluminum, or Other
B
Slot Width
S
D
Key Slot Width Key Slot Depth
I
Screw Size
J (Distance to
Key Slot)
Pointed jaws will have 120° included angle unless stated otherwise
Return Quote to:
Name
Company
Address
City
Phone
Fax
Email
34
DillonManufacturing, Inc.
State
Zip
Made in the USA
Special Serrated
— HARD JAWS
Specifications for hard top jaws
not covered in our standard line of products.
Dillon standard tolerances will be applied unless stated otherwise.
Fax special hard jaw requests to: 800-634-6480
Or email prints to: sales4@dillonmfg.com
L
Length
W
Width
H
Height
B
Slot Width
A
Slot Depth
F
Bolt Spacing
I
Screw Size
P
Pitch
# Holes
Required
S1 (Step
Height 1)
S2 (Step
Height 2)
# of Jaws
per Set
Ø1
Ø2
Ø3
Ø4
Ø5
Ø6
Set Up Dimension “A”
Set Up Dimension “B”
Return Quote to:
Name
Company
Address
City
Phone
Fax
Email
State
Zip
1-800-428-1133 | Fax: 1-800-634-6480 | www.dillonmfg.com
35
Special Tongue & Groove
— HARD JAWS
Specifications for hard top jaws
not covered in our standard line of products.
Dillon standard tolerances will be applied unless stated otherwise.
Fax special hard jaw requests to: 800-634-6480
Or email prints to: sales4@dillonmfg.com
L
Length
W
Width
H
Height
B
Slot Width
F
U
T
Tongue Width Tongue Height Bolt Spacing
Ø1
I
Screw Size
J (Distance
to Tongue)
S1 (Step
Height 1)
S2 (Step
Height 2)
# of Jaws
per Set
Ø2
Ø3
Ø4
Ø5
Ø6
Set Up Dimension “A”
Return Quote to:
Name
Company
Address
City
Phone
Fax
Email
36
DillonManufacturing, Inc.
State
Zip
Made in the USA
Set Up Dimension “B”
Special Acme
— HARD JAWS
Specifications for hard top jaws
not covered in our standard line of products.
Dillon standard tolerances will be applied unless stated otherwise.
Fax special hard jaw requests to: 800-634-6480
Or email prints to: sales4@dillonmfg.com
L
Length
W
Width
T
F
S
Bolt Spacing Tongue Width Key Slot Width
H
Height
I
Screw Size
J (Distance
to Key)
M
Thread Size
S1 (Step
Height 1)
S2 (Step
Height 2)
# of Jaws
per Set
Ø1
Ø2
Ø3
Ø4
Ø5
Ø6
Set Up Dimension “A”
Set Up Dimension “B”
Return Quote to:
Name
Company
Address
City
Phone
Fax
Email
State
Zip
1-800-428-1133 | Fax: 1-800-634-6480 | www.dillonmfg.com
37
Special Square
— HARD JAWS
Specifications for hard top jaws
not covered in our standard line of products.
Dillon standard tolerances will be applied unless stated otherwise.
Fax special hard jaw requests to: 800-634-6480
Or email prints to: sales4@dillonmfg.com
L
Length
W
Width
H
Height
F
Bolt Spacing
B
Slot Width
S
Key Slot Width
I
Screw Size
J (Distance
to Key)
M
Thread Size
S1 (Step
Height 1)
S2 (Step
Height 2)
# of Jaws
per Set
Ø1
Ø2
Ø3
Ø4
Ø5
Ø6
Set Up Dimension “A”
Return Quote to:
Name
Company
Address
City
Phone
Fax
Email
38
DillonManufacturing, Inc.
State
Zip
Made in the USA
Set Up Dimension “B”
DillonManufacturing, Inc.
NO
ORDINARY
CHUCK GREASE
D500 HPG
D500 HPG Chuck Grease formula is special
engineered for your applications and budget.
DILLONMFG.COM or call 800-428-1133
Dillon Manufacturing Inc.
2115 Progress Drive, Springfield, OH 45505
RETURN POLICY - RETURNED GOODS POLICY - JULY 2007
1. Dillon Manufacturing, Inc will only accept, for return and credit, current standard catalog
items which were purchased within a 60 day period and are in resalable condition.
2. Restocking Charge. The standard restocking charge is 15%.
3. Other Charges. Goods returned must be new, unused, in their original containers and
current as shown in the latest Dillon Manufacturing, Inc. catalog. Charges for updating and/
or reconditioning will be deducted from the credit memo issue.
4. Procedure
4.1. To return goods, you must contact a Customer Service Representative by telephone at
1-800-428-1133 for a (RMA) Returned Material Authorization form. Items may not be
accepted without a RMA number.
4.2. Please have the following information:
A. Reason you wish to return the goods;
B. Quantity and description of the goods;
C. Dillon Manufacturing, Inc.’s invoice number for the good being returned.
4.3. The RMA Form can be mailed or faxed, or an RMA number can be given over the
phone. The designated copy or number must accompany the items returned.
5. After inspection of the items returned, a credit memo will be issued.
6. All items returned for credit must be shipped prepaid.
1-800-428-1133 | Fax: 1-800-634-6480 | www.dillonmfg.com
DillonManufacturing, Inc.
2115 Progress Drive
Springfield, Ohio 45505