Final Plan – New Cut Summary Data Sheet
PAGE _ __ OF
Program Licensee Name:
Program Licence Number:
Prospect Name:
Geophysical File Number:
Company Contact:
Phone Number:
Twp.:
Rge.:
__
W
Refer to the Policy and Procedures Document for Submitting the Geophysical Field Report Form (PPD).
Note: See the PPD for definitions of LIS and Conventional lines.
The columns below apply to new cut lines and helipads.
A line is no longer considered existing if natural regeneration is greater than 2 m (height), or if silviculture, planting or seeding has been undertaken.
Line Number (where
applicable)
Segment Distance (m) or
Number of Sites
Conventional (Straight)
Average Width (m)
LIS Average Width (m)
(rebate)
LIS Average Width (m)
(no rebate)
*Access Average Width
(m)
*Detours Average Width
(m)
*Helipad(s) Average Area
(ha)
Timber damages are to be calculated for new cut programs in the Green Area only.
* Where minimal clearing was carried out, the requirement to count the site as “new cut” may be waived in writing at the discretion of the inspector.
GEO 46D (2013/11/30)
Alberta Energy Regulator Twin Atria Building, 4th Floor, 4999 – 98 Avenue, Edmonton, Alberta T6B 2X3
Page 1 of 1