REVEAL DESIGNS
®
Handcrafted in the U.S.A.
2015
All rights reserved. No part of this catalog may be reproduced, stored in a retrieval system,
or transmitted in any form or by any means, electrical, mechanical, photocopying, recording,
or otherwise, without prior written consent of Reveal Designs, LLC. 3/15/15
Photos courtesy of Art Grice (206-842-1294)
© 2015 Reveal Designs, LLC
Reveal Designs
Product Catalog
®
711 Westchester Avenue, Suite 203
White Plains, NY 10604
www.reveal-designs.com
P: 914 220 0277
F: 914 289 0227
Table of Contents
R E V E A L D E S I G N S ® OV E RV I E W
A R C H I T E C T U R A L H A R DWA R E
L E V E R S & K N O B S
E S C U T C H E O N S & RO S E T T E S
T H U M B T U R N S
P O C K E T D O O R H A R DWA R E
L O C K S & L AT C H E S
C A B I N E T / F U R N I T U R E H A R DWA R E
AC C E S S O R I E S
A P P E N D I X
WA R R A N T Y I N F O R M AT I O N
REVEAL DESIGNS ®
Reveal Designs partners with exceptional
global architectural and interior design firms
to create unique and ever expanding lines
of door hardware, cabinet hardware and
accessories. To date, Reveal Designs has
partnered with James Cutler and his firm
Cutler Anderson Architects, Peter Bohlin
and his firm Bohlin Cywinski Jackson, and
Matthew Quinn.
BCJ Levers
Reveal Designs manufacturers, markets and
distributes its partners designs exclusively
through Reveal Designs and its retailer/
distributor network across the U.S., Canada,
and the U.K. All of our partners’ designs are
handcrafted in the U.S.A. and made of only
the highest quality materials (predominantly,
stainless steel and bronze).
For more information on Reveal Designs,
please call 914-220-0277 or visit
www.reveal-designs.com.
The Cutler Lever
The Bainbridge Lever
Matthew Quinn’s
Grand Mesa Collection
REVEAL DESIGNS
R D OV E RV I E W
Installed & Custom Hardware
INSTALLED HARDWARE
Bainbridge Lever
All Stainless Steel
Orcas Lever
Beech / Stainless Steel
Mercer Lever
All Stainless Steel
BCJ Lever 2
Stainless Steel
Washington Pull
Stainless Steel
Anderson Pull
Oil Rubbed Bronze
Grand Mesa Pull
All Stainless Steel
Switch Cover
Stainless Steel
Door Stop
Stainless Steel / Black Rubber
products@reveal-designs.com
REVEAL DESIGNS
www.reveal-designs.com
914 220 0277
I N S TA L L E D & C U S TO M H A R DWA R E
CUSTOM HARDWARE
Anderson Appliance Pull 24”
All Stainless Steel
Bainbridge Lever
Oak / Stainless Steel
Mercer Lever
Walnut / Oil Rubbed Bronze
Orcas Lever
Beech / Oil Rubbed Bronze
Please note our Lever designs are often customized to be
used in both Lift and Slide and Window Lever applications
Contact Reveal Designs for more information on Custom Hardware
products@reveal-designs.com
REVEAL DESIGNS
www.reveal-designs.com
914 220 0277
I N S TA L L E D & C U S TO M H A R DWA R E
REVEAL DESIGNS
®
ARCHITECTURAL HARDWARE COLLECTION
Materials and Finishes
WO O D S P E C I E S
BEECH
(BW)
WA L N U T
(WW)
S TA I N L E S S S T E E L
(32D)
O I L RU B B E D B RO N Z E
(10B)
M E TA L F I N I S H E S
ANODIZED ALUMINUM
(28)
All Stainless Steel components manufactured using No. 304 Stainless Steel, unless otherwise noted
All Oil Rubbed Bronze components manufactured from a silicon bronze base with a live finish,
unless otherwise noted
Levers & Knobs
THE BAINBRIDGE LEVER
designed by Cutler Anderson Architects
REVEAL DESIGNS
LEVERS & KNOBS
THE BAINBRIDGE LEVER
designed by Cutler Anderson Architects
DESIGN AND FUNCTION
Image 1
(#100-32D)
• Mechanics revealed by handle wrapping around and through spindle
• Grip is designed to fit hand perfectly
• Wood handle versions warm to the touch
• Metal handle versions installed on both interior and exterior doors
• Functions with tubular latches and mortise locks (not recommended or warranted
for multipoint doors)
• Handcrafted and designed in U.S.A.
• U.S. Patent No. D542113
DIMENSIONS AND FIGURES
Image 2
(#100-10B)
Image 3
(#100-WW)
Product No. 100
* Functions with 8mm on Square Spindle
AVAILABLE IN
Beech / Stainless Steel (Image 4)
Walnut / Stainless Steel (Image 3)
All Stainless Steel (Darker Sandblasted grip) (Image 1)
Oil Rubbed Bronze / Stainless Steel (Image 2)
Anodized Aluminum / Stainless Steel
Image 4
(#100-BW)
All Stainless Steel components manufactured using No. 304 Stainless Steel
All Oil Rubbed Bronze components manufactured from a silicon bronze base with a live finish
Custom Metals and Woods Available Upon Request
Ability to manufacture hardware to LEED certification standards
products@reveal-designs.com
REVEAL DESIGNS
www.reveal-designs.com
914 220 0277
LEVERS & KNOBS
THE ORCAS LEVER
designed by Cutler Anderson Architects
REVEAL DESIGNS
LEVERS & KNOBS
THE ORCAS LEVER
designed by Cutler Anderson Architects
DESIGN AND FUNCTION
Image 1
(#101-32D)
• Designed to reveal mechanics of lever
• Handle runs through middle of spindle
• Grip is designed to fit hand perfectly
• Wood handle versions warm to the touch
• Metal handle versions installed on both interior and exterior doors
• Functions with tubular latches, mortise and multipoint locks
• Handcrafted and designed in U.S.A.
DIMENSIONS AND FIGURES
Image 2
(#101-10B)
Image 3
(#101-28)
Product No. 101
* Functions with 8mm on Square Spindle
AVAILABLE IN
Beech / Stainless Steel (Image 4)
Walnut / Stainless Steel
All Stainless Steel (Darker Sandblasted grip) (Image 1)
Oil Rubbed Bronze / Stainless Steel (Image 2)
Anodized Aluminum / Stainless Steel (Image 3)
Image 4
(#101-BW)
All Stainless Steel components manufactured using No. 304 Stainless Steel
All Oil Rubbed Bronze components manufactured from a silicon bronze base with a live finish
Custom Metals and Woods Available Upon Request
Ability to manufacture hardware to LEED certification standards
products@reveal-designs.com
REVEAL DESIGNS
www.reveal-designs.com
914 220 0277
LEVERS & KNOBS
THE CUTLER LEVER
designed by Cutler Anderson Architects
REVEAL DESIGNS
LEVERS & KNOBS
THE CUTLER LEVER
designed by Cutler Anderson Architects
DESIGN AND FUNCTION
• ADA and IBC compliant (no wrist turn required to operate)
Image 1
(#102-32D)
• Offset spindle creates knob look and lever function
• Designed to reveal mechanics of lever
• Wood knob design fits hand and is warm to the touch
• Metal handle versions installed on both interior and exterior doors
• Functions with tubular latches, mortise and multipoint locks
• Handcrafted and designed in U.S.A.
• U.S. Patent No. D551935
DIMENSIONS AND FIGURES
Image 2
(#102-28)
* All Stainless Steel and Oil Rubbed Bronze levers are 5/8” thick
Product No. 102
Image 3
(#102-WW)
Note: Functions with 8mm on Square Spindle
AVAILABLE IN
Beech / Stainless Steel
Walnut / Stainless Steel (Image 3)
All Stainless Steel (Image 1)
Oil Rubbed Bronze / Stainless Steel
Anodized Aluminum / Stainless Steel (Image 2)
Cherry / Stainless Steel (Image 4) (Custom Wood)
Image 4
(#102-CW)
All Stainless Steel components manufactured using No. 304 Stainless Steel
All Oil Rubbed Bronze components manufactured from a silicon bronze base with a live finish
Custom Metals and Woods Available Upon Request
Ability to manufacture hardware to LEED certification standards
products@reveal-designs.com
REVEAL DESIGNS
www.reveal-designs.com
914 220 0277
LEVERS & KNOBS
THE MERCER LEVER
designed by Cutler Anderson Architects
REVEAL DESIGNS
LEVERS & KNOBS
THE MERCER LEVER
designed by Cutler Anderson Architects
DESIGN AND FUNCTION
• Designed to reveal mechanics of lever
• Cylindrical grip easy to the touch
• Offered in a variety of metals and woods
• Wood handle versions warm to the touch
• Metal handle versions installed on both interior and exterior doors
• Functions with tubular latches, mortise and multipoint locks
Image 1
(#104-32D)
DIMENSIONS AND FIGURES
Image 2
(#104-10B)
Image 3
(#104-CW)
Product No. 104
* Functions with 8mm on Square Spindle
AVAILABLE IN
Beech / Stainless Steel
Walnut / Stainless Steel (Image 4)
All Stainless Steel (Image 1)
Oil Rubbed Bronze / Stainless Steel (Image 2)
Anodized Aluminum / Stainless Steel
Cherry / Stainless Steel (Image 3) (Custom Wood)
Image 4
(#104-WW)
All Stainless Steel components manufactured using No. 304 Stainless Steel
All Oil Rubbed Bronze components manufactured from a silicon bronze base with a live finish
Custom Metals and Woods Available Upon Request (e.g., Walnut / Oil Rubbed Bronze - Custom)
Ability to manufacture hardware to LEED certification standards
products@reveal-designs.com
REVEAL DESIGNS
www.reveal-designs.com
914 220 0277
LEVERS & KNOBS
THE CYPRESS LEVER
designed by Cutler Anderson Architects
REVEAL DESIGNS
LEVERS & KNOBS
THE CYPRESS LEVER
designed by Cutler Anderson Architects
DESIGN AND FUNCTION
Image 1
(#105-10B)
• Designed to reveal mechanics of lever
• Tapered grip fits hand ideally
• Handle wraps over spindle
• Wood handle versions warm to the touch
• Metal handle versions installed on both interior and exterior doors
• Functions with tubular latches, mortise and multipoint locks
• Handcrafted and designed in U.S.A.
DIMENSIONS AND FIGURES
Image 2
(#105-10B)
Image 3
(#105-WW)
Product No. 105
* Functions with 8mm on Square Spindle
AVAILABLE IN
Beech / Stainless Steel
Walnut / Stainless Steel (Image 3)
All Stainless Steel (Darker Sandblasted grip)
Oil Rubbed Bronze / Stainless Steel (Images 1 & 2)
Anodized Aluminum / Stainless Steel
Cherry / Stainless Steel (Image 4) (Custom Wood)
Image 4
(#105-CW)
All Stainless Steel components manufactured using No. 304 Stainless Steel
All Oil Rubbed Bronze components manufactured from a silicon bronze base with a live finish
Custom Metals and Woods Available Upon Request
Ability to manufacture hardware to LEED certification standards
products@reveal-designs.com
REVEAL DESIGNS
www.reveal-designs.com
914 220 0277
LEVERS & KNOBS
BCJ LEVER 1
designed by Bohlin Cywinski Jackson
REVEAL DESIGNS
LEVERS & KNOBS
BCJ LEVER 1
designed by Bohlin Cywinski Jackson
DESIGN AND FUNCTION
• Wood and polyurethane handle versions warm to the touch
• Metal handle versions installed on both interior and exterior doors
• Functions with mortise and multipoint locks
• Handcrafted and designed in U.S.A.
Image 1
(#106-32D)
DIMENSIONS AND FIGURES
Image 2
(#106-BW)
Image 3
(#106-WW)
Product No. 106
* Functions with 8mm on Square Spindle
AVAILABLE IN
Beech / Stainless Steel (Image 2)
Walnut / Stainless Steel (Image 3)
All Stainless Steel (Darker Sandblasted grip) (Image 1)
Oil Rubbed Bronze / Stainless Steel
Charcoal Polyurethane / Stainless Steel (Image 4)
Red Polyurethane / Stainless Steel
Image 4 (#106-PUR-CHAR)
All Stainless Steel components manufactured using No. 304 Stainless Steel
All Oil Rubbed Bronze components manufactured from a silicon bronze base with a live finish
Custom Metals, Woods and Colors Available Upon Request
Ability to manufacture hardware to LEED certification standards
products@reveal-designs.com
REVEAL DESIGNS
www.reveal-designs.com
914 220 0277
LEVERS & KNOBS
BCJ LEVER 2
designed by Bohlin Cywinski Jackson
REVEAL DESIGNS
LEVERS & KNOBS
BCJ LEVER 2
designed by Bohlin Cywinski Jackson
DESIGN AND FUNCTION
• Knurled grip
• Designed to reveal mechanics of lever
• Installed on both interior and exterior doors
• Functions with mortise locks
• Handcrafted and designed in U.S.A.
Image 1
(#107-PE-32D)
DIMENSIONS AND FIGURES
Image 2
(#107-PE-10B)
Product No. 107-PE
Image 3 (#107-PE-10B-ALL)
* Functions with 8mm on Square Spindle
AVAILABLE IN
All Stainless Steel (Image 1)
Oil Rubbed Bronze / Stainless Steel (Image 2)
All Oil Rubbed Bronze (Image 3)
All Stainless Steel components manufactured using No. 304 Stainless Steel
All Oil Rubbed Bronze components manufactured from a silicon bronze base with a live finish
Custom Metals Available Upon Request
Ability to manufacture hardware to LEED certification standards
products@reveal-designs.com
REVEAL DESIGNS
www.reveal-designs.com
914 220 0277
LEVERS & KNOBS
Escutcheons & Rosettes
ESCUTCHEONS
designed by Cutler Anderson Architects
REVEAL DESIGNS
E S C U T C H E O N S & RO S E T T E S
ESCUTCHEONS
designed by Cutler Anderson Architects
DESIGN AND FUNCTION
• 10 different sizes in 2 material choices
• All sizes fit with complete collection of levers
• Low profile (approximately 1/8 ” thick)
• Surface mounted
• Handcrafted in U.S.A.
Image 1
(#201-32D)
DIMENSIONS AND FIGURES
Image 2
(#208-32D)
No. 200
No. 201*
No. 202
No. 203
No. 205*
No. 208-A
Image 3
No. 209-A
(#207-32D)
No. 206
No. 207
No. 212
No. 208-B
No. 209-B
Note: All escutcheons approximately 1/8” thick
* Usable in standard 2 1/8” pre-bored doors
AVAILABLE IN
Stainless Steel (All Images)
Oil Rubbed Bronze
Image 4
(#206-32D)
All Stainless Steel components made from 304 Stainless Steel
All Oil Rubbed Bronze components produced from a silicon bronze base with a live finish
Custom Metals and Finishes Available Upon Request
Ability to manufacture hardware to LEED certification standards
products@reveal-designs.com
REVEAL DESIGNS
www.reveal-designs.com
914 220 0277
E S C U T C H E O N S & RO S E T T E S
Thumb Turns
BLAKE THUMB TURN
designed by Cutler Anderson Architects
REVEAL DESIGNS
THUMB TURNS
BLAKE THUMB TURN
designed by Cutler Anderson Architects
DESIGN AND FUNCTION
• Visually complement all levers and knobs
• Fully functional with all levers and knobs
• Integrates with mortise lock, multipoint lock, American and European profile cylinders,
separate thumb turn bolt and single cylinder deadbolt
• Emergency release function available
• Handcrafted and designed in U.S.A.
Image 1
(#401-32D)
DIMENSIONS AND FIGURES
Image 2
(#401-32D)
Product No. 401
* Functions with 5mm on Diamond Spindle
AVAILABLE IN
All Stainless Steel (All Images)
Oil Rubbed Bronze
All Stainless Steel components made from 304 Stainless Steel
All Oil Rubbed Bronze components produced from a silicon bronze base with a live finish
Custom Metals and Finishes Available Upon Request
Ability to manufacture hardware to LEED certification standards
products@reveal-designs.com
REVEAL DESIGNS
www.reveal-designs.com
914 220 0277
THUMB TURNS
SINCLAIR THUMB TURN
designed by Cutler Anderson Architects
REVEAL DESIGNS
THUMB TURNS
SINCLAIR THUMB TURN
designed by Cutler Anderson Architects
DESIGN AND FUNCTION
• Visually complements all levers and knobs
• Fully functional with all levers and knobs
• Integrates with mortise lock, multipoint lock, American and European profile cylinders,
separate thumb turn bolt and single cylinder deadbolt
• Emergency release function available
• Handcrafted and designed in U.S.A.
Image 1
(#400-32D)
DIMENSIONS AND FIGURES
Image 2
(#400-32D)
Product No. 400
* Functions with 5mm on Diamond Spindle
AVAILABLE IN
All Stainless Steel (All Images)
Oil Rubbed Bronze
All Stainless Steel components made from 304 Stainless Steel
All Oil Rubbed Bronze components produced from a silicon bronze base with a live finish
Custom Metals and Finishes Available Upon Request
Ability to manufacture hardware to LEED certification standards
products@reveal-designs.com
REVEAL DESIGNS
www.reveal-designs.com
914 220 0277
THUMB TURNS
BCJ THUMB TURN
designed by Bohlin Cywinski Jackson
REVEAL DESIGNS
THUMB TURNS
BCJ THUMB TURN
designed by Bohlin Cywinski Jackson
DESIGN AND FUNCTION
• Visually complements and functions with all levers and knobs
• Integrates with mortise lock, multipoint lock, American and European profile cylinders,
separate thumb turn bolt and single cylinder deadbolt
• Emergency release function available
• Handcrafted and designed in U.S.A.
Image 1
(#402-32D)
DIMENSIONS AND FIGURES
Image 2
(#402-32D)
Product No. 402
Image 3
(#402-10B)
AVAILABLE IN
All Stainless Steel (Images 1 & 2)
Oil Rubbed Bronze (Image 3)
All Stainless Steel components made from 304 Stainless Steel
All Oil Rubbed Bronze components produced from a silicon bronze base with a live finish
Custom Metals and Finishes Available Upon Request
Ability to manufacture hardware to LEED certification standards
products@reveal-designs.com
REVEAL DESIGNS
www.reveal-designs.com
914 220 0277
THUMB TURNS
Pocket Door Hardware
POCKET DOOR HARDWARE
designed by Cutler Anderson Architects
Edge Pull
Flush Pull
REVEAL DESIGNS
P O C K E T D O O R H A R DWA R E
POCKET DOOR HARDWARE
designed by Cutler Anderson Architects
DESIGN AND FUNCTION
• Operates on both pocket and sliding doors
• Flush Pull designed with lip inside grip area for easy opening
• Flush Pull (passage function, Product No. 693) uses concealed screws
• Edge Pull installed on door thickness equal or greater than 1 3/8”
• Privacy Flush Pull Set (Product No. 695)
Image 1
(#690-32D)
› Includes two Flush Pulls (surface mounted screws) and Blake Thumb Turn
› Operates on doors equal or greater than 1 3/8” thick
› Locking mechanism sold separately
DIMENSIONS AND FIGURES
Image 2
(#693-32D)
Edge Pull
Product No. 690
Flush Pull Product No. 693
Privacy Flush Pull Set
Product No. 695-B
(Locking Mechanism sold separately)
Image 3
(#693-10B)
AVAILABLE IN
Stainless Steel (Images 1 & 2)
Oil Rubbed Bronze (Images 3 & 4)
All Stainless Steel components made from 304 Stainless Steel
All Oil Rubbed Bronze components produced from a silicon bronze base with a live finish
Custom Metals and Sizes Available Upon Request
Image 4
(#695-B-10B)
Ability to manufacture hardware to LEED certification standards
products@reveal-designs.com
REVEAL DESIGNS
www.reveal-designs.com
914 220 0277
P O C K E T D O O R H A R DWA R E
Locks & Latches
LOCKS AND LATCHES
REVEAL DESIGNS
L O C K S & L AT C H E S
LOCKS AND LATCHES
DESIGN AND FUNCTION
Image 1
(#502-32D)
Interior Mortise Lock
Reveal Designs offers a full line of locks, latches, bolts, single and double cylinder deadbolts,
and cylinders to complement all of its decorative trim. Commonly sold mechanisms include:
• Mortise locks, both exterior and interior
• Tubular latches
• Privacy tubular latches
• Mortise passage latches
• Thumb turn privacy bolts
• Pocket and sliding door locks
• Single and double cylinder deadbolts (See next page for more information)
• Cylinders
AVAILABLE IN (OTHER FINISHES, FUNCTIONS, AND BACK-SETS AVAILABLE)
Image 2 (#505-A-2 1/2-32D)
Pocket/Sliding Door Lock
Image 3
(#500)
Tubular Latch
Image 4
(#503)
Thumb Turn Privacy Bolt
Passage Latches
500-LL-2 3/8-32D or 10B
500-LL-2 3/4-32D or 10B
500-KK-2 3/8-32D or 10B
500-KK-2 3/4-32D or 10B
Lever x Lever, Back Set 2 3/8”
Lever x Lever, Back Set 2 3/4”
Knob x Knob, Back Set 2 3/8”
Knob x Knob, Back Set 2 3/4”
Stainless Steel;
Stainless Steel;
Stainless Steel;
Stainless Steel;
Oil Rubbed Bronze
Oil Rubbed Bronze
Oil Rubbed Bronze
Oil Rubbed Bronze
Privacy Latches
500-LL-P-2 3/8-32D or 10B
500-LL-P-2 3/4-32D or 10B
500-KK-P-2 3/8-32Dor 10B
500-KK-P-2 3/4-32Dor 10B
Lever x Lever, Back Set 2 3/8”
Lever x Lever, Back Set 2 3/4”
Knob x Knob, Back Set 2 3/8”
Knob x Knob, Back Set 2 3/4”
Stainless Steel;
Stainless Steel;
Stainless Steel;
Stainless Steel;
Oil Rubbed Bronze
Oil Rubbed Bronze
Oil Rubbed Bronze
Oil Rubbed Bronze
Mortise Passage Latches
550-LL-2 1/2-32D or 10B
550-LL-2 3/4-32D or 10B
550-KK-2 1/2-32D or 10B
550-KK-2 3/4-32D or 10B
Lever x Lever, Back Set 2 1/2”
Lever x Lever, Back Set 2 3/4”
Knob x Knob, Back Set 2 1/2”
Knob x Knob, Back Set 2 3/4”
Stainless Steel;
Stainless Steel;
Stainless Steel;
Stainless Steel;
Oil Rubbed Bronze
Oil Rubbed Bronze
Oil Rubbed Bronze
Oil Rubbed Bronze
Exterior Mortise Locks
501-LL-2 1/2-32D or 10B
501-LL-2 3/4-32D or 10B
501-KK-2 1/2-32D or 10B
501-KK-2-3/4-32D or 10B
Lever x Lever, Back Set 2 1/2”
Lever x Lever, Back Set 2 3/4”
Knob x Knob, Back Set 2 1/2”
Knob x Knob, Back Set 2 3/4”
Stainless Steel;
Stainless Steel;
Stainless Steel;
Stainless Steel;
Oil Rubbed Bronze
Oil Rubbed Bronze
Oil Rubbed Bronze
Oil Rubbed Bronze
Interior Mortise Locks
502-LL-2 1/2-32D or 10B
502-LL-2 3/4-32D or 10B
502-KK-2 1/2-32D or 10B
502-KK-2 3/4-32D or 10B
Lever x Lever, Back Set 2 1/2”
Lever x Lever, Back Set 2 3/4”
Knob x Knob, Back Set 2 1/2”
Knob x Knob, Back Set 2 3/4”
Stainless Steel;
Stainless Steel;
Stainless Steel;
Stainless Steel;
Oil Rubbed Bronze
Oil Rubbed Bronze
Oil Rubbed Bronze
Oil Rubbed Bronze
Thumb Turn Privacy Bolts
503-2 3/8-32D
or 10B
Back Set 2 3/8”
503-2 3/4-32D
or 10B
Back Set 2 3/4”
Stainless Steel; Oil Rubbed Bronze
Stainless Steel; Oil Rubbed Bronze
Pocket / Sliding Door Lock
505-A-2 1/2-32D or 10B
Back Set 2 1/2”
505-A-2 3/4-32D or 10B
Back Set 2 3/4”
Stainless Steel; Oil Rubbed Bronze
Stainless Steel; Oil Rubbed Bronze
products@reveal-designs.com
REVEAL DESIGNS
www.reveal-designs.com
914 220 0277
L O C K S & L AT C H E S
SINGLE & DOUBLE
CYLINDER DEADBOLTS
REVEAL DESIGNS
L O C K S & L AT C H E S
SINGLE & DOUBLE
CYLINDER DEADBOLTS
DESIGN AND FUNCTION
• Reveal Designs offers both single and double cylinder deadbolts
• All thumb turn designs available
• Both round and square escutcheons available
• May be used for both uncut and pre-bored 2 1/8” doors
• Please see Price List for specific item numbers
DIMENSIONS AND FIGURES
Image 1
Image 2
Image 3
(#230-A-32D)
Thumb Turn Escutcheons
Cylinder Escutcheons
Product No. 230-A*
Product No. 230-B*
Product Dwg. No. 3686a**
Product Dwg. No. 3686b**
Product No. 233-A***
Product No. 233-B***
(#3686a-10B)
(#233-B-32D)
* For use with uncut doors through 1 5/8” pre-bored doors
** For use with 2 1/8” pre-bored doors only
*** For use with uncut doors through 2 1/8” pre-bored doors
AVAILABLE IN
Stainless Steel (Images 1 & 3)
Oil Rubbed Bronze (Image 2)
Stainless Steel escutcheons made from 304 Stainless Steel
Oil Rubbed Bronze escutcheons produced from a silicon bronze base with a live finish
Custom Metals and Sizes Available Upon Request
products@reveal-designs.com
REVEAL DESIGNS
www.reveal-designs.com
914 220 0277
L O C K S & L AT C H E S
Cabinet Hardware
GRAND MESA PULL
designed by Matthew Quinn
REVEAL DESIGNS
C A B I N E T / F U R N I T U R E H A R DWA R E
GRAND MESA PULL
designed by Matthew Quinn
DESIGN AND FUNCTION
• Simplistic, yet sophisticated style; innovative design
• Installed either vertically or horizontally
• Concealed screws
• Inventory includes 2”, 6” and 8” sizes
• Optional wood overlay “warms” cabinet or furniture; custom woods available
• Handcrafted in U.S.A.
Image 1
(#620-2-32D)
DIMENSIONS AND FIGURES
2”
6”
1”
1”
3”
8
3”
8
3”
18
Image 2
(#620-6-WW)
Product No. 620-2
Product No. 620-6
8”
1”
3”
8
3”
18
Image 3
(#620-6-BW)
Product No. 620-8
AVAILABLE IN
Beech / Stainless Steel (Image 3)
Walnut / Stainless Steel (Image 2)
All Stainless Steel (Darker Sandblasted Overlay) (Image 1)
Oil Rubbed Bronze Finish on Anodized Aluminum / Stainless Steel (Image 4)
Image 4
(#620-8-ORB-28)
All Stainless Steel components made from 304 Stainless Steel
Oil Rubbed Bronze Finish on Anodized Aluminum is not a “live” finish
Custom Woods, Metals, Finishes and Sizes Available Upon Request
Ability to manufacture hardware to LEED certification standards
products@reveal-designs.com
REVEAL DESIGNS
3
18
www.reveal-designs.com
914 220 0277
C A B I N E T / F U R N I T U R E H A R DWA R E
VERANDA PULL
designed by Matthew Quinn
3”
8
REVEAL DESIGNS
C A B I N E T / F U R N I T U R E H A R DWA R E
VERANDA PULL
designed by Matthew Quinn
DESIGN AND FUNCTION
• Simplistic, yet sophisticated knob design
• Inventory includes three decorative patterns in two metal options
• Concealed screws
• Handcrafted in U.S.A.
Image 1
(#621-ORB-28)
DIMENSIONS AND FIGURES
1”
1”
12
Image 2
12
(#622-ORB-28)
3”
3”
3”
18
18
18
Product No. 621
5”
8
5”
8
5”
8
Image 3
1”
12
Product No. 622
Product No. 623
(#623-32D)
AVAILABLE IN
Stainless Steel (Image 3)
Oil Rubbed Bronze Finish on Anodized Aluminum (Images 1 & 2)
All Stainless Steel components made from 304 Stainless Steel
Oil Rubbed Bronze Finish on Anodized Aluminum is not a “live” finish
Custom Metals, Finishes and Sizes Available Upon Request
Ability to manufacture hardware to LEED certification standards
products@reveal-designs.com
REVEAL DESIGNS
www.reveal-designs.com
914 220 0277
C A B I N E T / F U R N I T U R E H A R DWA R E
ABACUS PULL
designed by Matthew Quinn
REVEAL DESIGNS
C A B I N E T / F U R N I T U R E H A R DWA R E
ABACUS PULL
designed by Matthew Quinn
DESIGN AND FUNCTION
• Power of design at your fingertips:
1st: Choose the grip material and size;
2nd: Choose an “O” mount or “C” mount in Stainless Steel or Oil Rubbed Brass; and
3rd: Select the mount position on the grip
A few of the possible configurations…
Image 1 (#624-SQ-ORB-28)
(#624-OMT-32D)
• Optional wood grip “warms” cabinet or furniture; custom woods available
• Installed either vertically or horizontally; concealed screws
• Inventory includes 1 1/4” Round, 1 1/4” Square, 5” and 8” grip sizes
• Handcrafted in U.S.A.
DIMENSIONS AND FIGURES
Grips (underside shown for configuration options)
*All grips are 3/8” thick
5”
Image 2
(#624-RD-32D)
1”
1”
14
(#624-CMT-32D)
14
Product No. 624-RD*
1”
14
Product No. 624-5*
8”
1”
1”
14
14
Product No. 624-SQ*
Mounts
15”
116
Image 3
(#624-5-BW)
(#624-CMT-32D(x2))
Product No. 624-8*
1”
4
31”
32
1”
4
1”
1”
12
Product No. 624-OMT (“O” Mount)
12
Product No. 624-CMT (“C” Mount)
AVAILABLE IN
Grips: Beech (Image 3); Walnut (Image 4); Stainless Steel (Darker Sandblasted)(Image 2); and
Oil Rubbed Brass (Image 1)
Mounts: Stainless Steel (Images 1,2, & 3), Oil Rubbed Brass (Image 4)
Image 4
(#624-8-WW)
#
( 624-CMT-ORB-28(x2))
All Stainless Steel components made from 304 Stainless Steel
Oil Rubbed Brass is a “live” finish
Custom Woods, Metals, Finishes and Sizes Available Upon Request
Ability to manufacture hardware to LEED certification standards
products@reveal-designs.com
REVEAL DESIGNS
www.reveal-designs.com
914 220 0277
C A B I N E T / F U R N I T U R E H A R DWA R E
WASHINGTON PULL
designed by Bohlin Cywinski Jackson
and Cutler Anderson Architects
REVEAL DESIGNS
C A B I N E T / F U R N I T U R E H A R DWA R E
WASHINGTON PULL
designed by Bohlin Cywinski Jackson
and Cutler Anderson Architects
DESIGN AND FUNCTION
• Installed either vertically or horizontally
• Elegant and minimalistic
• Immediately available: 2 1/2” and 3 1/2” pulls in both Stainless Steel and Oil Rubbed Bronze
• Custom sizes and materials available within 2-4 weeks
Image 1
(#600-32D)
DIMENSIONS AND FIGURES
Image 2
(#600-10B)
Product No. 600-2.5
Image 3
Product No. 600-3.5
(#600-32D)
AVAILABLE IN
Stainless Steel (Images 1, 3 & 4)
Oil Rubbed Bronze (Image 2)
All Stainless Steel components made from 304 Stainless Steel
All Oil Rubbed Bronze components produced from a silicon bronze base with a live finish
Custom Metals and Sizes Available Upon Request
Ability to manufacture hardware to LEED certification standards
Image 4
(#600-32D)
products@reveal-designs.com
REVEAL DESIGNS
www.reveal-designs.com
914 220 0277
C A B I N E T / F U R N I T U R E H A R DWA R E
ANDERSON PULL
designed by Cutler Anderson Architects
REVEAL DESIGNS
C A B I N E T / F U R N I T U R E H A R DWA R E
ANDERSON PULL
designed by Cutler Anderson Architects
DESIGN AND FUNCTION
• Installed either vertically or horizontally
• Concealed screws
• Available in 3” and 5 1/2” sizes
• Handcrafted in U.S.A.
Image 1
(#601-5.5-32D)
DIMENSIONS AND FIGURES
Image 2
(#601-3-32D)
Image 3
(#601-5.5-10B)
Product No. 601-3
Product No. 601-5.5
AVAILABLE IN
All Stainless Steel (Darker Sandblasted grip) (Images 1-2)
Oil Rubbed Bronze / Stainless Steel Shafts (Images 3-4)
All Stainless Steel components made from 304 Stainless Steel
All Oil Rubbed Bronze components produced from a silicon bronze base with a live finish
Custom Metals and Sizes Available Upon Request
Image 4
(#601-3-10B)
Ability to manufacture hardware to LEED certification standards
products@reveal-designs.com
REVEAL DESIGNS
www.reveal-designs.com
914 220 0277
C A B I N E T / F U R N I T U R E H A R DWA R E
PUGET PULL
designed by Cutler Anderson Architects
REVEAL DESIGNS
C A B I N E T / F U R N I T U R E H A R DWA R E
PUGET PULL
designed by Cutler Anderson Architects
DESIGN AND FUNCTION
• Installed either horizontally or vertically
• Concealed screws
• Handcrafted in U.S.A.
Image 1
(#602-32D)
DIMENSIONS AND FIGURES
Image 2
(#602-32D)
Image 3
(#602-10B)
Product No. 602
AVAILABLE IN
Stainless Steel (Images 1-2)
Oil Rubbed Bronze (Images 3-4)
All Stainless Steel components made from 304 Stainless Steel
All Oil Rubbed Bronze components produced from a silicon bronze base with a live finish
Custom Metals and Sizes Available Upon Request
Image 4
(#602-10B)
Ability to manufacture hardware to LEED certification standards
products@reveal-designs.com
REVEAL DESIGNS
www.reveal-designs.com
914 220 0277
C A B I N E T / F U R N I T U R E H A R DWA R E
ALLAN PULL
REVEAL DESIGNS
C A B I N E T / F U R N I T U R E H A R DWA R E
ALLAN PULL
DESIGN AND FUNCTION
• Elegant, minimalistic design
• Concealed screw
• Handcrafted in U.S.A.
Image 1
(#605-32D)
DIMENSIONS AND FIGURES
Image 2
(#605-32D)
Image 3
(#605-32D)
Product No. 605
AVAILABLE IN
Stainless Steel (Images 1-3)
Oil Rubbed Bronze (Image 4)
All Stainless Steel components made from 304 Stainless Steel
All Oil Rubbed Bronze components produced from a silicon bronze base with a live finish
Custom Metals and Sizes Available Upon Request
Image 4
(#605-10B)
Ability to manufacture hardware to LEED certification standards
products@reveal-designs.com
REVEAL DESIGNS
www.reveal-designs.com
914 220 0277
C A B I N E T / F U R N I T U R E H A R DWA R E
Accessories
PUSH & KICK PLATES
designed by Cutler Anderson Architects
REVEAL DESIGNS
AC C E S S O R I E S
PUSH & KICK PLATES
designed by Cutler Anderson Architects
DESIGN AND FUNCTION
• 3 sizes available
• Low profile (approximately 1/8” thick)
• Surface mounted
• Handcrafted in U.S.A.
Image 1
(#250-32D)
DIMENSIONS AND FIGURES
Image 2
(#257-32D)
Product No. 250 Product No. 251 Product No. 252
Product No. 257
AVAILABLE IN
Stainless Steel (All Images)
Oil Rubbed Bronze
All Stainless Steel components made from 304 Stainless Steel
All Oil Rubbed Bronze components produced from a silicon bronze base with a live finish
Custom Metals and Sizes Available Upon Request
Ability to manufacture hardware to LEED certification standards
products@reveal-designs.com
REVEAL DESIGNS
www.reveal-designs.com
914 220 0277
AC C E S S O R I E S
SWITCH / OUTLET COVERS
designed by Cutler Anderson Architects
REVEAL DESIGNS
AC C E S S O R I E S
SWITCH / OUTLET COV ERS
designed by Cutler Anderson Architects
DESIGN AND FUNCTION
• Light switches and power outlets in both Decora and Toggle styles
• Custom configurations manufactured routinely
• Low profile (approximately 1/8” thick)
• Functions with Lutron ® products
• Handcrafted in U.S.A.
Image 1
(#260-32D)
DIMENSIONS AND FIGURES
Decora
Image 2
(#260-32D)
Image 3
Single
Product No. 260
Double
Product No. 261-H
Toggle
Outlet
(#265-ST-10B)
Product No. 265-ST
Product No. 265-DT
Product No. 265-TT
Product No. 266-D
Product No. 266-D2
AVAILABLE IN
Stainless Steel (Images 1 & 2)
Oil Rubbed Bronze (Images 3 & 4)
Image 4
(#266-D-10B)
All Stainless Steel components made from 304 Stainless Steel
All Oil Rubbed Bronze components produced from a silicon bronze base with a live finish
Custom Metals, Sizes and Configurations Available Upon Request
Ability to manufacture hardware to LEED certification standards
products@reveal-designs.com
REVEAL DESIGNS
www.reveal-designs.com
914 220 0277
AC C E S S O R I E S
DOOR KNOCKER
designed by Cutler Anderson Architects
REVEAL DESIGNS
AC C E S S O R I E S
DOOR KNOCKER
designed by Cutler Anderson Architects
DESIGN AND FUNCTION
• Elegant tear drop design
• Design produces loud reverberation throughout door
• Designed to be installed inset into the door
• Handcrafted in U.S.A.
• U.S. Patent No. D535182
Image 1
(#700-32D)
DIMENSIONS AND FIGURES
Image 2
(#700-32D)
Door Knocker
Image 3
Product No. 700
(#700-10B)
AVAILABLE IN
Stainless Steel (Images 1 & 2)
Oil Rubbed Bronze (Image 3)
All Stainless Steel components made from 304 Stainless Steel
All Oil Rubbed Bronze components produced from a silicon bronze base with a live finish
Custom Metals and Sizes Available Upon Request
Ability to manufacture hardware to LEED certification standards
products@reveal-designs.com
REVEAL DESIGNS
www.reveal-designs.com
914 220 0277
AC C E S S O R I E S
DOOR STOP
designed by Cutler Anderson Architects
REVEAL DESIGNS
AC C E S S O R I E S
DOOR STOP
designed by Cutler Anderson Architects
DESIGN AND FUNCTION
• Elegant design for both residential and commercial installation
• Easy floor installation
• 360° rubber design for easy install
Image 1
(#720-32D)
DIMENSIONS AND FIGURES
Image 2
(#720-32D)
Door Stop
Image 3
Product 720
(#720-32D)
AVAILABLE IN
Stainless Steel / Black Rubber (Images 1-3)
All Stainless Steel components made from 304 Stainless Steel
products@reveal-designs.com
REVEAL DESIGNS
www.reveal-designs.com
914 220 0277
AC C E S S O R I E S
Warranty Information
Warranty Information
Reveal Designs® warranties its products will be free from defects in materials and workmanship
for a period of one year from the date of purchase. Reveal Designs’ sole obligation under these
warranties will be to replace or repair, at Reveal Designs’ sole discretion, the defective product
or parts; provided Reveal Designs is notified of the alleged defect within the warranty period,
is able to inspect the product or part and receives a proof of purchase receipt. Reveal Designs
shall assume no responsibility for any labor charges regarding the removal or reinstallation
of the products; nor will Reveal Designs be responsible for any freight, postage, traveling or
handling expense relative to the product. In addition, in no event shall Reveal Designs be liable
for collateral or consequential damages. Reveal Designs does not warrant against oxidations,
discolorations, changes in finishes and any lock, latch or other product not manufactured
directly by Reveal Designs. Moreover, these warranties shall not extend to any product or
part thereof (i) subjected to misuse, abuse or neglect; (ii) damaged by accident; (iii) rendered
defective by reason of improper installation or by the performance of repairs; (iv) modified in
any way; (v) the consequence of uses for which our products were not designed; and (vi) in
connection with any wood grip lever installed on the outside of any exterior door. All other
warranties, written or oral, expressed or implied, and including but not limited to warranties of
merchantability or fitness for intended purpose, are expressly excluded.
REVEAL DESIGNS
WA R R A N T Y I N F O R M AT I O N
711 Westchester Avenue, Suite 203
White Plains, NY 10604
www.reveal-designs.com
P: 914 220 0277
F: 914 289 0227