Design and Analysis
retechmech@gmail.com
TOPICS
FIELD
REDA-01
Design and Analysis of Cam and Follower
REDA-02
Design and Analysis of Propeller Shaft
REDA-03
Design and Analysis of Bumper
REDA-04
Design and Analysis of Crank Shaft for Different Materials
REDA-05
Design and Analysis of Connecting Rod by Using Beryllium
REDA-06
Design and Analysis of Leaf Spring
REDA-07
Design and Analysis of Knee Joint
REDA-08
Design and Analysis of Fatigue Calculation for Railway Bogie Frames
REDA-09
Design and analysis of Cam Shaft
REDA-10
Design and Analysis of Cyclone Separator
REDA-11
Design and Analysis of Turbine Blades
REDA-12
Design and Analysis of Universal Coupling for light weight vehicles
REDA-13
Design and Analysis of Two wheeler frame
REDA-14
Design and Analysis of Press Tool
REDA-15
Design and Analysis of Composite Spur Gear
REDA-16
Design and Analysis of Domestic Windmill Blades
REDA-17
Design and Analysis of Rocker Arm
REDA-18
Design and Analysis of Hydraulic Jack for Lifting Light Vehicles
REDA-19
Design and Systematic Analysis of Telescopic Shock Absorber
REDA-20
Design and Structural Analysis of Rear Axle Casing of Tractor
REDA-21
Design and Analysis of a Bevel Gear Used in Compressor
REDA-22
Design and Analysis of Ball Bearing
REDA-23
Design and Analysis of Bell Crank Lever
REDA-24
Design and Analysis of Flange Coupling in Power Transmission
REDA-25
Design and Analysis of an Aircraft Propeller Blade
REDA-26
Modelling and analysis of Automobile Chassis Brackets
REDA-27
Design and Analysis of Spur Gear With Involute Profile Gear Tooth
REDA-28
Design and Optimizations of Wall bracket
REDA-29
Design and Analysis of Multi-Cylinder Crank Shaft
REDA-30
Design and Optimizations of Piston for Four Stroke Petrol Engine
REDA-31
Design and Analysis of Engine Fly wheel
REDA-32
Design and Analysis of Pressure Vessel
REDA-33
Design, Analysis and Optimizations of Crane Hook.
REDA-34
Design and Analysis of Truck Chassis
www.retechprojects.com
11
STRUCTURAL ANALYSIS
CODE
©RETECH SOLUTIONS PVT. LTD.
Design and Analysis
retechmech@gmail.com
REDA-35
Design and Analysis of Two Wheeler Suspension Frame
REDA-36
Design and Analysis Of Two Wheeler Front Wheel
REDA-37
Analysis and Optimization of Drive Shaft in Eccentric Mechanical Press
REDA-38
Analysis of Knuckle Joint of 30C8 Steel for Automobile
REDA-39
Design and Analysis of CNC Milling Machine Bed with Composite Material
REDA-40
Design and Analysis of Lathe Spindle
REDA-41
Modal Analysis and Design Optimization on Wheel Rim.
REDA-42
Thermal Analysis of Engine Cylinder
REDA-43
Thermal Analysis of Brake Shoe and Friction Pad
REDA-44
Thermal Analysis of Steam Turbine
REDA-45
Design and Thermal Analysis of Disc Brake
REDA-46
Design and Thermal analysis of steam turbine
REDA-47
Thermal Analysis of cylinder head gasket
REDA-48
Hot Gas Duct for a High Temperature Gas Cooled Reactor
REDA-49
Design of water tube boiler subjected to thermal analysis
REDA-50
Design and Thermal Analysis of Cylinder Liner
REDA-51
Finite Element Analysis of LPG Cylinder
REDA-52
Design and Analysis of Drum Brake
REDA-53
Water Tube Heat Exchanger Subjected to Thermal Analysis.
REDA-54
Thermal Analysis of Engine Cylinder Fin by various Geometry and Material
REDA-55
Thermal Analysis of Composite Piston
REDA-56
Thermal Analysis of Cylinder Exhaust Valve
REDA-57
Design and Thermal Analysis of Ball Bearing
REDA-58
CFD Analysis of Solar Flat Plate Collector
REDA-59
CFD Analysis Heat Transfer Flow Visualization Of Perforated Array Fined
REDA-60
CFD Analysis of Area Investigation in Gas Turbine Combustion Chamber
REDA-61
CFD Analysis of Cyclone Separator
REDA-62
CFD Analysis of Butterfly Valve
REDA-63
CFD Analysis of Centrifugal Fan
REDA-64
CFD analysis of Shell and Tube heat exchanger
REDA-65
CFD Analysis of Carburettor
REDA-66
CFD Flow Analysis of Cooling Tower
REDA-67
CFD Analysis of Throttle Valve
REDA-68
CFD Analysis of Combustion Chamber of Diesel Engine
www.retechprojects.com
12
STRUCTURAL ANALYSIS
FIELD
THERMAL ANALYSIS
TOPICS
COMPUTATIONAL FLUID DYNAMICS
CODE
©RETECH SOLUTIONS PVT. LTD.
Design and Analysis
retechmech@gmail.com
TOPICS
FIELD
REDA-69
CFD Analysis of Centrifugal Compressor Fluid Flow
REDA-70
CFD Analysis of Aircraft
REDA-71
CFD Analysis of Bolero Spoiler
REDA-72
CFD Analysis of Vertical Axis Wind Mill
REDA-73
CFD Analysis of Silencer
REDA-74
CFD Analysis of Radiator
REDA-75
CFD Simulation and Analysis of Fluid Flex Parameters In Y-Shaped Pipe
REDA-76
CFD Analysis of Humidification Process
REDA-77
CFD Analysis of Intake Manifold for 4 stroke engine
REDA-78
CFD Analysis of Propeller Fan
REDA-79
CFD Analysis of Finned Heat Exchanger
REDA-80
CFD Analysis Of Square Cross Sectional Missile
REDA-81
CFD Analysis in a Helical Coil Heat Exchanger Using Fluent
REDA-82
CFD analysis of a blower outer casing
REDA-83
CFD Analysis of T-Junction
REDA-84
CFD Analysis of Fluid Structure Interaction of Heat Exchanger Tube
REDA-85
CFD Analysis of Free Surface Flow Around a Ship Hull
REDA-86
CFD Simulation in the Design of a Parabolic Winglet
REDA-87
CFD Analysis Transonic Axial Flow Compressor
REDA-88
CFD Analysis On Rocket Nozzle
REDA-89
CFD Analysis of Air Flow
REDA-90
CFD Analysis Two Wheeler Engine Cooling Fins
REDA-91
Shape Optimization of Pressurized Inlet Diffuser in Steam Vent Silencer
REDA-92
CFD Analysis of Lobe Pump
REDA-93
CFD Analysis of Hot And Cold Steam Flow in Elbow
REDA-94
CFD Analysis of Ball Valve
REDA-95
Design of 120cc Single Cylinder Experimental Engine for Analysis of Intake
COMPUTATIONAL FLUID DYNAMICS
CODE
Swirl and Multiple Ignition Sites.
REDA-96
CFD Analysis of Globe Valve as Control Valve
REDA-97
CFD Analysis of Oil Pumping in a Reciprocating Compressor
REDA-98
CFD of the in-cylinder flow in Direct-injection Diesel engine
REDA-99
CFD Analysis of Rocket Turbine Blades
REDA-100
CFD Analysis of Hydraulic Solenoid Valve, Developed by ÖHLINS Racing
‘AB’
www.retechprojects.com
13
©RETECH SOLUTIONS PVT. LTD.
Mechanical Fabrication
retechmech@gmail.com
CODE
TOPICS
FIELD
REMF-1
Sensor operated mobile platform for disabled person usage
REMF-2
Fabrication of automatic hill start brake assist with reverse locking system
REMF-3
Fabrication of automated sensor operated foot dust cleaning
REMF-4
Sensor operated intelligent braking system with anti-locking system
REMF-5
Automatic brake failure indicator and engine over heating alarm for two
REMF-6
Fabrication of sensor operated automatic ramming machine
REMF-7
Fabrication of belt conveyor automation
REMF-8
Automatic head light brightness control with rain operated wiper
REMF-9
Fabrication of automatic board cleaner
REMF-10
Fabrication of motorized windows
REMF-11
Fabrication of over load indicator and alarm
REMF-12
Fabrication of optical avoiding robot
REMF-13
Fabrication of legged robot
REMF-14
Automatic gate open and close system in lorry weight checking area
REMF-15
Automatic clutch and braking system for four wheeler
REMF-16
Automatic distance measurement and braking system using ultrasonic
REMF-17
Automatic wheel air filling system
REMF-18
Fabrication of emergency braking system
REMF-19
Fabrication of Motorized wheel chair
REMF-20
Six-axis material handling robot
REMF-21
Pneumatic pick and place robot with remote control
REMF-22
Fabrication of sensor operated track guided vehicle
REMF-23
Motorized wheel chair cum bed
REMF-24
Automatic motorized door open and closed system mechanism
REMF-25
Automatic motorized focus light mechanism in all direction
REMF-26
Sensor operated accident avoiding bumper for four wheeler
REMF-27
Fabrication of gear level indicator for automobile
REMF-28
Fabrication of automatic railway gate controller
REMF-29
Digital fuel level indicator
REMF-30
Automatic locking system based on engine ON and OFF system
REMF-31
Automatic side stand retrieve system in two wheeler based on engine on and
AUTOMATION APPLICATION
wheeler
off system
REMF-32
Automatic hand brake release for four wheeler
www.retechprojects.com
14
©RETECH SOLUTIONS PVT. LTD.
Mechanical Fabrication
retechmech@gmail.com
FIELD
REMF-33
Automatic motorized shutter
REMF-34
Automatic side stand and brake locking system in two wheeler
REMF-35
Ultrasonic Parking Guidance System
REMF-36
Automatic wall climbing robot
REMF-37
Fabrication of Robotic elevator
REMF-38
Auto head-lamp Alignment system for automobile
REMF-39
Fabrication of Fully Automated Drilling Machine
REMF-40
Automatic Water level controller for Overhead tank
REMF-41
Automatic Rain sensing windows for Home
REMF-42
Automatic car window opening by using sensors (sound & oxygen sensor)
REMF-43
Safety system to avoid accident when driver in sleep
REMF-44
Fabrication of automated guided vehicle
REMF-45
Mobile detector for school or colleges
REMF-46
Brain wave sensor controlled vehicle
REMF-47
Voice operated fuel injector system
REMF-48
Car theft prevention using code locking system
REMF-49
Bus back side accident avoid system
REMF-50
Vehicle safety system with fuel alcohol detection and indication
REMF-51
Fabrication of Turbo Super Charger for two wheeler
REMF-52
Fabrication of hybrid two wheeler
REMF-53
Reduction of noxious gases in two wheeler engine exhaust
REMF-54
Fabrication of water fuel engine with power generation
REMF-55
Fabrication of four wheel steering mechanism
REMF-56
Modified differential for zero turning radius
REMF-57
Fabrication differential unit for 3 wheeler
REMF-58
Fabrication of compressed air engine
REMF-59
Compressed Air Production using vehicle Suspension
REMF-60
Fabrication of air bag for two wheeler rider
REMF-61
Fabrication of hand free vehicle for disabled person
REMF-62
Fuel efficiency improvement in Petrol engine by water injection
REMF-63
Fabrication of Compressed Air Production Using Speed Breaker
REMF-64
Fabrication of Quick lifting jack with gear arrangement
REMF-65
Multi fuel single cylinder engine run by petrol and LPG
REMF-66
Fabrication of Rain operated wiper
www.retechprojects.com
15
AUTOMATION APPLICATION
TOPICS
AUTOMOBILE APPLICATION
CODE
©RETECH SOLUTIONS PVT. LTD.
Mechanical Fabrication
retechmech@gmail.com
REMF-67
Fabrication of chainless cycle
REMF-68
Fabrication of four wheel drive with steering unit
REMF-69
Gearless transmission mechanism for automobiles
REMF-70
Fabrication of Omni wheel drive mechanism
REMF-71
Elimination Of Carbon Particles From Exhaust Gas
REMF-72
Fabrication of multi speed gear box based on speed variation
REMF-73
Installation of LPG in two stroke gasoline engine
REMF-74
Fabrication of jet engine
REMF-75
Fabrication of Stirling engine with alternator
REMF-76
Fabrication of motorized screw jack
REMF-77
Hydraulic parking attachment for car
REMF-78
Stair climbing robot with chain drive
REMF-79
Fabrication of Quad bike
REMF-80
Fabrication of Air brake system using exhaust gas
REMF-81
Fabrication of electromagnetic gear shifting for two wheeler
REMF-82
Fabrication of electromagnetic shock absorber
REMF-83
Electromagnetic braking system for two wheeler
REMF-84
Fabrication of electromagnetic engine
REMF-85
Automatic electromagnetic clutch
REMF-86
Fabrication of electromagnetic valve
REMF-87
Electromagnetic brake and clutch system in two wheeler
REMF-88
Fabrication of magnetic sweeper for production industries usage
REMF-89
Electromagnetic engine with alternator
REMF-90
Fabrication of electromagnetic moulding machine
REMF-91
Power generation using horizontal axis wind mill system
REMF-92
Electrical power generation using speed brake
REMF-93
Foot step power generation by using rack and pinion.
REMF-94
Power generation using vertical axis wind mill system
REMF-95
Fabrication of multi-function wind mill
REMF-96
Electrical power generation using shock absorber by using rack and pinion
REMF-97
Fabrication of solar powered auto charging grinding machine
REMF-98
Solar powered grass cutting machine
REMF-99
Fabrication of double reflection solar Cooker
REMF-100
Solar wheelchair for physically handicapped person
www.retechprojects.com
16
AUTOMOBILE APPLICATION
FIELD
ELECTRO MAGNETIC APPLICATION
TOPICS
RENEABLE APPLICATION
CODE
©RETECH SOLUTIONS PVT. LTD.
Mechanical Fabrication
retechmech@gmail.com
TOPICS
FIELD
Solar water heater with natural sun heat
REMF-102
Fabrication of Solar hybrid car
REMF-103
Fabrication of Solar cycle
REMF-104
Solar based electromagnetic braking system
REMF-105
Solar agricultural water pumping system
REMF-106
Solar Agricultural Water Pumping System with Auto Tracking
REMF-107
Fabrication of Solar Air Dryer with Auto tracking System
REMF-108
Fabrication of Solar powered Automated Guided vehicle
REMF-109
Electrical power Generation using Railway Track
REMF-110
Electrical power generation of Water Pumping System Using Wind Mill
REMF-111
Fabrication of regenerative braking system
REMF-112
Fabrication of water fuel engine with power generation
REMF-113
Fabrication of dual power generation for two wheeler
REMF-114
Bio oil from wastage plastic
REMF-115
Fabrication of hybrid power generation from highway
REMF-116
Fabrication of solar Dual axis power generation system
REMF-117
Power generation using turbine attached bicycle
REMF-118
Solar Automatic Mobile Charging With Pay System
REMF-119
Energy-harvesting shock absorber with a mechanical motion rectifier
REMF-120
Energy conversion from Roadways using kinetic motion
REMF-121
Fabrication of three axis hydraulic modern trailer
REMF-122
Fabrication of hydraulic jack with trolley
REMF-123
Fabrication of hydraulic lift with power pack
REMF-124
Automatic 2ton hydraulic pipe bending machine
REMF-125
Automatic hydraulic lift
REMF-126
Fabrication of hydraulic power generation
REMF-127
Hydraulic fork lift
REMF-128
Hydraulic lifting system for four wheeler
REMF-129
Hydraulic screw jack
REMF-130
Intelligent motorized hydraulic jack
REMF-131
Fabrication of hydraulic vice and jack
REMF-132
Fabrication of hydraulic scissor lift
REMF-133
Fabrication of hydraulic V,U and L shape Bending machine
REMF-134
Fabrication of hydraulic mobile crane
www.retechprojects.com
17
HYDRAULIC APPLICATION
REMF-101
RENEABLE APPLICATION
CODE
©RETECH SOLUTIONS PVT. LTD.
Mechanical Fabrication
retechmech@gmail.com
FIELD
Hydraulic Pressing machine
REMF-136
Fabrication of Hydraulic boring machine
REMF-137
Fabrication of Hydraulic floor crane
REMF-138
Hydraulic armature bearing remove system
REMF-139
Hydraulic heavy sheet cutting machine
REMF-140
Fabrication of Hydraulic Ladder
REMF-141
Automatic pneumatic clutch and braking system
REMF-142
Pneumatic powered four axis material handling robot
REMF-143
Three directional lifting trailer using pneumatic power
REMF-144
Fabrication of automatic pneumatic hack saw machine with feeding tech
REMF-145
Fabrication of automatic four side pneumatic jack in four wheeler
REMF-146
Fabrication of pneumatic powered cycle
REMF-147
Fabrication of pneumatic cutting and grinding machine
REMF-148
Fabrication of pneumatic door open and close system
REMF-149
Automatic pneumatic sheet metal cutting machine
REMF-150
Automatic pneumatic bumper for four wheeler-without wheel sensor
REMF-151
Automatic pneumatic can crusher with continuous feeding system
REMF-152
Automatic pneumatic drilling machine of rotary gun type
REMF-153
Automatic pneumatic hammer
REMF-154
Automatic pneumatic operated wiper system
REMF-155
Automatic pneumatic paper cutting machine
REMF-156
Automatic pneumatic printing press
REMF-157
Automatic pneumatic punching and riveting machine
REMF-158
Automatic pneumatic punching machine
REMF-159
Automatic pneumatic ramming machine
REMF-160
Automatic pneumatic reciprocating water pumping system
REMF-161
Automatic pneumatic stand for two wheeler
REMF-162
Automatic pneumatic vice and jack
REMF-163
Automatic pneumatic water pumping system
REMF-164
Pneumatic radial plunger pump
REMF-165
Pneumatic operated bearing puller
REMF-166
Pneumatic wheel removers
REMF-167
Lever operated pneumatic gear change for two wheeler
REMF-168
Fabrication of pneumatic punching die
www.retechprojects.com
18
HYDRAULIC
REMF-135
APPLICATION
TOPICS
PNEUMATIC APPLICATION
CODE
©RETECH SOLUTIONS PVT. LTD.
Mechanical Fabrication
retechmech@gmail.com
TOPICS
FIELD
Fabrication of pneumatic zigzag lifter
REMF-170
Pneumatic multi speed gear box
REMF-171
Fabrication of pneumatic wheel drive in four wheeler
REMF-172
Fabrication of pneumatic injection moulding
REMF-173
Pneumatic pick and place robot with handle drive
REMF-174
Fabrication of air drive engine in tri-cycle
REMF-175
Pneumatic powered flight wheel controlling system
REMF-176
Pneumatic paper cup making
REMF-177
Pneumatic six axis material handling
REMF-178
Automatic pneumatic bearing press and puller
REMF-179
Pneumatic air powered generation
REMF-180
Fabrication of pneumatic powered multi grinding machine
REMF-181
Fabrication of friction welding machine
REMF-182
Fabrication of Abrasive Jet Machining by using compressed air system
REMF-183
Fabrication of pedal operated metal cutting
REMF-184
Fabrication of vertical bridge lifting mechanism
REMF-185
Fabrication of motorized single acting hack saw machine
REMF-186
Fabrication of Geneva wheel mechanism for belt conveyor
REMF-187
Experimental study of cooling rate spray impel on hot steel plate
REMF-188
Manual hand operated driller
REMF-189
Fabrication of high speed four way hack saw machine
REMF-190
Fabrication of Coconut Dehusking machine
REMF-191
Double acting hacksaw machine by using scotch yoke mechanism
REMF-192
Fabrication of pedal operated water pumping system
REMF-193
Fabrication of stair clamping trolley for manual operation
REMF-194
Handle operated chair cum bed
REMF-195
Pedal operated bio gas filling
REMF-196
Fabrication of pedal power hacksaw with dual chain drive mechanisms
REMF-197
Fabrication of pendulum based water pumping system
REMF-198
Fabrication of manual operated Double jaw vice
REMF-199
Design and Fabrication of gear type injection moulding
REMF-200
Design and fabrication of a low cost surface finishing machine
PNEUMATIC APPLICATION
REMF-169
PRODUCTION APPLICATION
CODE
There’s a way to do it better. FIND IT.
-Thomas A. Edison
www.retechprojects.com
19
©RETECH SOLUTIONS PVT. LTD.