Dual-Band Combiner 1850 – 1910 / 1930 – 1990 MHz 1710 – 1755 / 2110 – 2155 MHz PCS AWS • Designed for co-siting purposes • Enables feeder sharing • Suitable for indoor or outdoor applications COM ANT • With fault detection and integrated switch for multiple DC power supply AWS PCS 782 10469 Typical Attenuation Curves Diagram I Technical Data VSWR 936.3232 Subject to alteration. Impedance Input power Port PCS Port AWS Intermodulation products Power supply voltage operational survival Polarity protection Max. Current Power supply current at PCS port operating with dummy load Lightning protection Temperature range Connectors Application Weight Dimensions (w x h x d) 782 10808 Single unit Double unit 1850 – 1910 (Rx) / 1930 – 1990 (Tx) MHz 1710 – 1755 (Rx) / 2110 – 2155 (Tx) MHz Attenuation/dB Pass band PCS AWS Insertion loss Port PCS ↔ Port ANT Port AWS ↔ Port ANT Isolation Port PCS ↔ Port AWS 782 10469 -10 1850 – 1910 -20 -30 1930 – 1990 1710 – 1755 2110 – 2155 -50 < 0.3 dB (1850 – 1910 / 1930 – 1990 MHz) < 0.2 dB (1710 – 1755 / 2110 – 2155 MHz) -60 -70 > 50 dB (1850 – 1910 / 1930 – 1990 MHz) > 50 dB (1710 – 1755 / 2110 – 2155 MHz) < 1.25 (1850 – 1910 / 1930 – 1990 MHz) < 1.25 (1710 – 1755 / 2110 – 2155 MHz) 50 Ω -80 -90 -100 1700 1750 1800 1850 1900 1950 2000 2050 2100 2150 2200 Frequency/MHz < 250 W (1850 – 1910 / 1930 – 1990 MHz) < 250 W (1710 – 1755 / 2110 – 2155 MHz) < –160 dBc (3 rd order; with 2 x 20 W) +10 … +15 V DC (Port PCS) +10 … +30 V DC (Port AWS) +10 … +35 V DC –48 V DC (Port PCS, Port AWS) 1.5 A (Port ANT) Port PCS ↔ Port ANT 0 -40 Diagram II Port Port AWS ↔ ANT Attenuation/dB Type No. Port AWS ↔ Port ANT Port Port PCS ↔ ANT Port Port AWS ↔ ANT 0 -0.1 -0.2 2110 – 2155 1710 – 1755 -0.3 1850 – 1910 100 mA ±20mA (+10 ... +15 V DC) 8/20 μs, 20 kA; 10/350 μs, 3 kA (Port ANT) –40 ... +65 °C 7-16 female (long neck) Indoor or outdoor (IP 66) 2.5 kg 5 kg 122 x 296 x 64 mm 122 x 296 x 120 mm (including mounting brackets) -0.4 1930 – 1990 -0.5 -0.6 -0.7 -0.8 -0.9 -1.0 1700 1750 1800 1850 1900 1950 2000 2050 2100 2150 2200 Frequency/MHz Internet: http://www.kathrein.de 782 10469, 782 10808 Page 1 of 2 KATHREIN-Werke KG . Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-494 Dual-Band Combiner 1850 – 1910 / 1930 – 1990 MHz 1710 – 1755 / 2110 – 2155 MHz PCS AWS Accessories (order separately) Type No. Clamp set suitable for mast diameter of 734 360 34 – 60 mm 734 361 60 – 80 mm 734 362 80 – 100 mm 734 363 100 – 120 mm 734 364 120 – 140 mm 734 365 45 – 125 mm Type No. Description 793 301 Clamp Set DC stop DC stop Side view 782 10469 Single Unit 4 screws M5 x 10 ➀ ➁ 4 spring washers 5.5 DIN 6095 ➂ ➃ Side view 782 10808 Double Unit ➀➁ 4 screws M5 x 10 4 spring washers 5.5 DIN 6095 ➂➃ The mounting plates can be removed by loosening the screws ➀ to ➃ (M5 x 10) and replaced with other means of mounting, always provided that the max. drilled depth of 8.5 mm is respected with the choice of replacement screws. As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are used under extraordinary operating conditions. Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of a mast mounted device or even cause it to fall to the ground. These facts must be considered during the site planning process. The Dual-band Combiners are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E and have passed environmental tests as recommended in ETS 300 019-2-4. The installation team must be properly qualified and also be familiar with the relevant national safety regulations. The details given in our data sheets have to be followed carefully when installing the antennas, filters, combiners, amplifiers and accessories. The limits for the coupling torque of RF connectors, recommended by the connector manufacturers must be obeyed. Any previous datasheet issues have now become invalid. Page 2 of 2 782 10469, 782 10808 Internet: http://www.kathrein.de KATHREIN-Werke KG . Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-494 936.3232 Please note: Subject to alteration. Top view 782 10469 Single Unit, 782 10808 Double Unit