Specification Data CH30004 E
02/98
41000 Series
Control Valves
A Complete Line of
Heavy Duty,
Balanced, Cage Guided,
Globe Valves
with Noise Control
Lo-dB® Trim
Table of Contents
Foreword .............................................................................. 2
Numbering System ............................................................... 3
Ratings/Connections ............................................................. 3
General Data ........................................................................ 4
Allowable Pressure Drop Page Index ................................... 4
Temperature Range/Seat Leakage ....................................... 5
CV and FL versus Travel ................................................... 5 - 8
Construction ....................................................................... 9
Materials ...................................................................... 10 - 13
Allowable Pressure Drops ........................................... 14 - 27
Dimensions .................................................................. 28 - 31
Weights ............................................................................... 32
Accessories and Options .................................................... 33
Sales Offices and Distribution Centers ............................... 36
Foreword
Masoneilan’s 41000 Series heavy-duty control valve
line, engineered to handle the most demanding process
conditions, exceeds the capabilities of regular valves.
Variety of High Performance Engineered
Trim Packages
Available with full area as well as reduced CV capacities,
41000 Series trim options include :
Broad Temperature Ranges
Size for size, the 41000 Series provides effective
control throughout a broad range of process
temperatures from -196°C to +566°C.
• Lo-dB Single Stage trim - provides excellent
noise attenuation on gas and steam services and
cavitation protection on liquid services.
Higher Allowable Pressure Drops
41000 Series control valves provide exceptional and
dependable performance over a wide range of pressure
drops typical of severe services.
• Lo-dB Double Stage trim - designed for noise
control on gas or steam at high pressure drop
ratios.
Greater Capacity with Low Recovery
Masoneilan’s 41000 Series control valves have the
highest capacities of contemporary cage-type globe
valves. These unusually high capacities are attained
with minimum pressure recovery, as indicated by high
critical flow (FL) factors.
For more information regarding NACE conformance,
cavitation, critical pressure drop, and VRT trim, consult
your Masoneilan representative or refer to the following
publications :
1. Masoneilan Handbook for Control Valve Sizing
(Bulletin OZ1000)
High-Performance Materials are Standard
Without exception, the materials we specify as standard
on the 41000 Series have been tested and selected to
provide trouble-free operation in services with high
pressures and extreme temperatures. Therefore,
specification is simplified and longevity on any
application is assured.
2. Masoneilan Noise Control Manual
(Bulletin OZ3000)
Trade names noted throughout are for reference only. Masoneilan
reserves the right to supply trade named material or its equivalent.
2
SD CH30004 E - 02/98
41000 Series
Numbering System
1st
2nd
Actuator Type
1st
2nd
4
1
Body Series
37 Spring Diaphragm :
direct, air to close
(fail open action)
38 Spring Diaphragm :
reverse, air to open
(fail closed action)
87 Spring Diaphragm :
direct, air to close
(fail open action)
88 Spring Diaphragm :
reverse, air to open
(fail closed action)
41 Cage
Guided
Globe
3rd
4th
5th
Control
Characteristic
Seal Type
O. Undefined
3. Pressure
Energized
PTFE Seal
Ring
4. Auxiliary Shutoff
Plug
5. Metal Seal Ring
6. PTFE Seal Ring
9. Graphite Seal Ring
0.
1.
2.
Undefined
Linear
Equal %
Trim Type
0.
1.
2.
3.
4.
Undefined
Standard
Lo-dB
Single Stage
Lo-dB Single
Stage with
Diffuser
Lo-dB
Double Stage
Ratings/Connections
• Socket Weld
Threaded
Valve
Size
mm
inch
50
2
80 to 200
3 to 8
250 to 400
10 to 16
80x50x80
3x2x3
100x50x100
4x2x4
100x80x100
4x3x4
to
400x300x400
Butt Weld
ANSI Class 150 to 1500
ANSI Class 2500
and equivalent PN
and equivalent PN
•
•
to
16x12x16
Note : For AFNOR and DIN connections, consult Masoneilan
SD CH30004 E - 02/98
41000 Series
RF & RTJ
3
General Data
Standard Valve
(41300, 41400, 41500, 41600 and 41900)
Lo-dB Double Stage Valve
(41314)
• Body
flow direction : flow to open
gas or steam only
CV ratio : 50:1
• Trim
cage : two-stage Lo-dB
plug : pressure balanced cage
guided with pressure energized
PTFE seal ring
• Flow Characteristic
standard trim : linear
type : high-capacity globe
flow direction : see Allowable Pressure Drop
Table
Lo-dB trim : flow to open for gas or steam
Lo-dB trim
with diffuser : flow to close for gas or steam
cavitation service : flow to close
CV ratio : 100:1 standard capacity trim
50:1 Lo-dB and reduced capacity
trim
• Bonnet
type : stud bolted, extended
• Trim
cage : cylindrical ported or Lo-dB
plug : pressure balanced cage guided
with metal, PTFE, or graphite
seal ring ; pressure balanced
cage guided, with spring loaded
internal auxiliary tight shutoff plug
• Flow Characteristic
standard trim : linear, equal percentage
Actuator
type : spring diaphragm,
handwheel : optional
Allowable Pressure Drop Page Index
Model
F.T.C./Page
F.T.O./Page
Model
F.T.C./Page
41611
41621
41612
41613
17, 18
17, 18
19
19
26, 27
26, 27
26, 27
26, 27
41911
41921
41912
41913
17, 18
17, 18
19
19
26, 27
26, 27
26, 27
26, 27
41311
41312
41321
41314
-
20, 21, 22, 23
20, 21, 22, 23
20, 21, 22, 23
24, 25
41411
41421
41412
41413
14, 15
14, 15
16
16
-
41511
41521
41512
41513
17, 18
17, 18
19
19
26, 27
26, 27
26, 27
26, 27
4
F.T.O./Page
SD CH30004 E - 02/98
41000 Series
Temperature Range/Seat Leakage
Valve
Type
Standard
Single Stage
Lo-dB
Anti-Cavitation
Model
Seat Leakage per
IEC 534-4 and
ANSI / FCI 70.2 Class
mm
inch
Minimum
Maximum
41300
50 - 400
2 - 16
-46
+ 232
41400
50 - 400
2 -16
-196
+ 566
50 - 100
150 - 400
50 - 400
50 - 100
150 - 400
2-4
6 - 16
2 - 16
2-4
6 - 16
-196
-196
-29
-196
-196
+ 566
+ 566
+ 149
+ 566
+ 566
IV & V
IV
V (optional)
II
III
IV
III
IV
50 - 400
2 - 16
-46
+ 232
IV & V
41500
41600
41900
Lo-dB
Double Stage
Temperature Range (°C)
Size
41314
Cv and FL versus Travel
Standard Trim (Single Stage) Models 41411, 41511, 41611 and 41911
Percent of Travel
FL
10
20
30
40
50
60
70
80
90
100
0.94
0.94
0.93
0.93
0.92
0.92
0.91
0.91
0.90
0.90
12.5
30
23
56
45
115
71
184
93
305
250
495
290
770
450
1080
730
1540
14
35
26
65
51
134
81
208
119
345
310
550
370
860
570
1200
900
1720
15.5
38
29
72
59
148
93
226
142
375
365
600
440
940
680
1320
1050
1880
16
40
30
75
60
155
95
240
165
400
415
640
510
1000
770
1400
1280
2000
Valve
ANSI Class
Orifice Travel
Size
and
Diameter
(mm)
mm inch equivalent PN
(mm)
50
2
900-2500
50
80
80
100
100
150
150
200
2
3
3
4
4
6
6
8
300,600
2500
300-1500
2500
300-1500
2500
150-1500
2500
200
8
150-1500
165.1
250 10
150-1500
203.2
300 12
150-1500
247.7
400 16
150-1500
330.2
SD CH30004 E - 02/98
41000 Series
46.7
20.3
63.5
38.1
88.9
50.8
111.3
50.8
130.0
20.3
50.8
38.1
63.5
38.1
76.2
50.8
95.25
63.5
101.6
Flow Characteristic : LINEAR
Rated CV
1.4
2
2.7
4
5.4
8
9
12
6
20
15
30
20
50
30
70
30
100
2.7
4.9
5.1
8
10
17
16
32
16
54
40
85
50
130
70
180
130
260
4.2
8.3
7.9
14
16
28
25
55
26
90
75
145
80
230
140
320
230
460
5
6
13
11
22
23
46
36
86
42
145
110
235
130
370
200
520
298
740
8
19
15
34
30
70
47
122
58
205
145
330
180
510
270
710
410
1020
10
25
19
46
38
95
60
156
74
260
190
415
230
650
350
910
548
1300
Cv and FL versus Travel
Standard Trim (Single Stage) Models 41421, 41521, 41621 and 41921
Flow Characteristic : EQUAL PERCENTAGE
Percent of Travel
10
20
30
40
50
60
70
80
90
100
FL
0.94
0.94
0.94
0.94
0.94
0.94
0.93
0.92
0.92
0.90
7.9
10.5
12.6
14
Valve
ANSI Class
Orifice
Size
and
Diameter Travel
(mm)
mm inch equivalent PN (mm)
50
2
900-2500
46.7
50
80
2
3
300,600
2500
63.5
80
100
3
4
300-1500
2500
100
150
4
6
150
200
200
20.3
Rated CV
0.5
0.7
1
1.5
2.7
5
0.7
1.3
2.2
3.6
6.6
12.6
19.8
26.4
31.5
35
38.1
0.9
1.2
1.3
2.3
1.8
4.2
2.9
6.8
4.9
12.3
9.4
23.4
14.7
36.7
19.6
49
23.4
58.5
26
65
88.9
50.8
2
3
2.8
5
3.9
9
6.2
15
10.6
26
20.1
50
31.2
79
42.2
105
50.4
126
56
140
300-1500
2500
111.3
50.8
3
4
5
8
6
14
10
23
17
43
32
81
51
127
68
170
81
203
90
225
6
8
150-1500
2500
130.0
50.8
5
7
7
13
10
23
16
37
27
68
52
130
81
203
108
271
130
324
144
360
8
150-1500
165.1
63.5
8
11
12
21
16
37
25
60
43
109
83
207
130
324
174
433
207
518
230
575
250 10
300 12
150-1500
150-1500
203.2
247.7
76.2
95.25
17
24
32
45
58
81
94
131
170
238
324
454
508
711
678
949
810
1134
900
1260
41300 Series (Single Stage) Model 41311
Flow Characteristic : LINEAR
Percent of Travel
10
20
30
40
50
60
70
80
90
100
FL
0.94
0.94
0.93
0.93
0.92
0.92
0.91
0.91
0.90
0.90
Valve
ANSI Class
Orifice
Size
and
Diameter Travel
(mm)
mm inch equivalent PN
(mm)
50
2
900-1500
46.7
20.3
50
2
600
63.5
38.1
80
3
600-1500
88.9
50.8
100
4
600-1500
111.3
50.8
150
6
600-1500
130.0
200
8
600-1500
165.1
250 10
600-1500
300 12
600-1500
400 16
300,600
Rated CV
1.4
2.7
4.2
6
8
10
12.5
14
15.5
16
2
4.9
8.3
13
19
25
30
35
38
40
2.7
5.1
7.9
11
15
19
23
26
29
30
4
8
14
22
34
46
56
65
72
75
5.4
10
16
23
30
38
45
51
59
60
8
17
28
46
70
95
115
134
148
155
9
16
25
36
47
60
71
81
93
95
12
32
55
86
122
156
184
208
226
240
50.8
20
52
92
144
204
260
308
344
376
400
63.5
32
83
147
230
326
416
493
550
602
640
203.2
76.2
50
130
230
360
510
650
770
860
940
1000
247.7
95.3
70
182
322
504
714
910
1078
1204
1316
1400
330.2
101.6
100
260
460
740
1020
1300
1540
1720
1880
2000
6
SD CH30004 E - 02/98
41000 Series
Cv and FL versus Travel
41300 Series (Single Stage) Model 41321
Flow Characteristic : EQUAL PERCENTAGE
Percent of Travel
10
20
30
40
50
60
70
80
90
100
FL
0.94
0.94
0.94
0.94
0.94
0.94
0.93
0.92
0.92
0.90
Valve
ANSI Class
Orifice
Size
and
Diameter Travel
(mm)
mm inch equivalent PN (mm)
Rated CV
50
2
900-1500
46.7
20.3
0.7
1.3
2.2
3.6
6.6
12.6
19.8
26.4
31.5
35
50
80
2
3
600
600-1500
63.5
88.9
38.1
50.8
1.2
3
2.3
5
4.2
9
6.8
15
12.3
26
23.4
50
36.7
79
49
105
58.5
126
65
140
100 4
150 6
600-1500
600-1500
111.3
130.0
50.8
50.8
4
7
8
13
14
23
23
37
43
68
81
130
127
202
170
272
203
324
225
360
200 8
250 10
600-1500
600-1500
165.1
203.2
63.5
76.2
12
18
21
32
36
57
59
93
109
171
207
324
322
504
434
680
518
810
575
900
300 12
600-1500
247.7
95.3
25
45
79
130
239
454
706
951
1134
1260
Lo-dB /Anti-cavitation (Single Stage) Model 41312
Flow Characteristic : LINEAR
Percent of Travel
10
20
30
40
50
60
70
80
FL
0.94
0.94
0.94
0.94
0.94
0.94
0.94
0.94
8.4
17.5
21
17.5
35
46
32
67
84
49
102
135
74
147
210
221
350
508
840
9.6
20
24
20
40
52
36
76
96
56
116
155
84
168
240
252
400
580
960
Valve
ANSI Class
Orifice
Size
and
Diameter Travel
(mm)
mm inch equivalent PN
(mm)
50
2
900-1500
46.7
20.3
50
2
600
63.5
38.1
80
3
600-1500
88.9
50.8
100
4
600-1500
111.3
50.8
150
6
600-1500
130.0
63.5
200 8
250 10
300 12
400 16
600-1500
600-1500
600,900
600
165.1
203.2
247.7
330.2
76.2
88.9
101.6
101.6
SD CH30004 E - 02/98
41000 Series
90
100
0.94 0.94
Rated CV
1.2
2.5
3
2.5
5
7
5
10
12
7
15
20
11
21
30
35
50
73
120
2.4
5
6
5
10
13
9
19
24
14
29
40
21
42
60
63
100
145
240
3.6
7.5
9
7.5
15
20
14
29
36
21
44
60
32
63
90
95
150
218
360
7
4.8
10
12
10
20
26
18
38
48
28
58
80
42
84
120
126
200
290
480
6.0
12.5
15
12.5
25
33
23
48
60
35
73
100
53
105
150
158
250
363
600
7.2
15
18
15
30
39
27
57
72
42
87
115
63
126
180
189
300
435
720
10.8
22.5
27
22.5
45
59
41
86
108
63
131
175
95
189
270
284
450
653
1080
12
25
30
25
50
65
45
95
120
70
145
195
105
210
300
315
500
725
1200
Cv and FL versus Travel
Lo-dB/Anti-cavitation (Single Stage) Models➀
41412
41413
41512
41513
41612 41912
41613 41913
Flow Characteristic : LINEAR
Percent of Travel
10
20
30
40
50
60
70
80
90
100
FL
0.94
0.94
0.94
0.94
0.94
0.94
0.94
0.94
0.94
0.94
Valve
ANSI Class
Orifice
Size
and
Diameter Travel
(mm)
mm inch equivalent PN (mm)
50
2
900-2500
50
2
300,600
80
3
2500
80
3
300-1500
100
4
2500
100
4
300-1500
150
6
2500
150
6
150-1500
200
8
2500
200
8
Rated CV
1.2
2.5
3
2.5
5
7
5
10
12
7
15
20
11
21
30
16
32
50
25
50
65
2.4
5
6
5
10
13
9
19
24
14
29
40
21
42
60
31
63
100
50
100
130
3.6
7.5
9
7.5
15
20
14
29
36
21
44
60
32
63
90
47
95
150
75
150
195
4.8
10
12
10
20
26
18
38
48
28
58
80
42
84
120
62
126
200
100
200
260
6.0
12.5
15
12.5
25
33
23
48
60
35
73
100
53
105
150
78
156
250
125
250
325
7.2
15
18
15
30
39
27
57
72
42
87
115
63
126
180
93
189
300
150
300
390
8.4
17.5
21
17.5
35
46
32
67
84
49
102
135
74
147
210
109
221
350
175
350
455
9.6
20
24
20
40
52
36
76
96
56
116
155
84
168
240
124
252
400
200
400
520
10.8
22.5
27
22.5
45
59
41
86
108
63
131
175
95
189
270
140
284
450
225
450
585
12
25
30
25
50
65
45
95
120
70
145
195
105
210
300
155
315
500
250
500
650
70
145
215
290
360
435
505
580
650
725
101.6 120
240
360
480
600
720
840
960
1080
1200
46.7
20.3
63.5
38,1
88.9
50,8
111.3
50,8
130.0
63,5
150-1500
165.1
76.2
250 10
150-1500
203.2
88.9
300 12
150-1500
247.7
101.6
400 16
150-600
330.2
➀ Where diffuser is added on high capacity trim, overall CV is reduced as much as 15%.
Lo-dB (Double Stage) Model 41314
Flow Direction : FLOW TO OPEN
Percent of Travel
FL
Valve
Size
Flow Characteristic : LINEAR
10
20
30
40
50
60
70
80
90
100
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
0.95
Nominal
Orifice Travel
Diameter
(mm)
mm inch equivalent PN (mm)
50
ANSI Class
and
Rated CV
2
600-1500
46.7
38.1
3.5
7
11
14
18
21
25
28
32
35
80 3
100 4
150 6
200 8
250 10
300 12
400 16
600-1500
600-1500
600-1500
600-1500
600-1500
600,900
600
88.9
111.3
130.0
165.1
203.2
247.7
330.2
50.8
63.5
63.5
76.2
101.6
101.6
101.6
6.5
13
15
30
41
60
80
13
25
30
60
82
120
160
20
38
45
90
123
180
240
26
50
60
120
164
240
320
33
63
75
150
205
300
400
39
75
90
160
246
360
480
46
88
105
190
287
420
560
52
100
120
220
328
480
640
59
113
135
250
369
540
720
65
125
150
300
410
600
800
8
SD CH30004 E - 02/98
41000 Series
Body S/A Construction
1
2
3
4
23
5
22
6
21
7
8
9
10
11
18
13
16
14
15
Balance Plug Construction
41500, 41600, 41900 Series
DN 50 to DN 400 (2" to 16")
(DN 50 to DN 100 Shown)
19
20
17
12
12
Pilot Balanced Construction
41400 Series
DN 150 to DN 400 (6" to 16")
Pilot Balanced Construction
41400 Series
DN 50 to DN 100 (2" to 4")
SD CH30004 E - 02/98
41000 Series
9
Materials
Carbon and Low Alloy Steel Version
Ref.
No
Temperature Range
+343°C +427˚C +454˚C
-29˚C
∇
∇
Description
1
2
3
4
5
6
7
18
8
9
10
11
12
Valve plug stem
13
Seat ring
14
15
16
17
19
Seat ring gasket
Martensitic St. St. Type 17-4 PH
Austenitic St. St. Type 304
Packing flange nut
Austenitic St. St. Type 304
Packing flange
Carbon steel zinc plated
Packing spacer
Austenitic St. St. Type 303
KEVLAR + PTFE
Packing
CARBON STEEL ASTM A 216 Gr WCC
Body
CHROME-MOLYBDENUM STEEL ASTM A 217 Gr WC6
ASTM A 194 Gr 2H
Valve body nut
Plug pin
Austenitic Stainless Steel
Valve body gasket
Spiral wound 316L St. St. with graphite filler
Seal ring type
See page 12
Plug spring (41400 only)
INCONEL X750
Flat spring ( 6" to 16")
Austenitic St. St. Type 316 with hardfacing
ASTM A 638 Gr 660
ASTM A 194 Gr 4
(2 to 4") St. St. Type 316 w. hardfacing
(6" to 16") St St type CA6 NM w. hardfacing
Spiral wound 316L St. St. with graphite filler
Martensitic St. St. Type 17-4 PH
Martensitic St. St. Type CA6NM Nitrited
Martensitic St. St. Type CA6NM Chromium-plated
Martensitic St. St. Type CA6NM Nitrited
Martensitic St. St. Type 17-4 PH
INCONEL X750 + shot peening
Retaining ring (41400 only) INCONEL X750
(2" to 4") Martensitic St. St Type 410
20
∇
GRAPHITE
Bonnet
Cage
+566°C
∇
Standard Materials
Packing flange stud
Valve plug
∇
Auxiliary plug (41400 only)
( 6 to 16" ) Martensitic St. St. Type CA6NM
Martensitic St. St. Type CA6NM with
hardfaced and chromium-plated
with hardfaced and chromium-plated
21
22
23
Valve body stud
ASTM A 193 Gr B7
Guide bushing
Martensitic St. St. Type 440 C
Packing follower
Austenitic St. St. Type 303
10
ASTM A 193 Gr 16
SD CH30004 E - 02/98
41000 Series
Materials
Stainless Steel Version
Ref.
No
Temperature Range -196°C
-101°C
∇
-46°C
∇
∇
-29˚C
∇
+149°C
Description
1
2
3
4
5
6
7
18
8
9
10
11
12
Valve plug stem
+343°C +427˚C +454˚C
∇
∇
∇
+566°C
∇
∇
Standard Materials
Martensitic St. St. Type 17-4 PH
ASTM A 638 Gr 660
Packing flange stud
Austenitic St. St. Type 304
Packing flange nut
Austenitic St. St. Type 304
Packing flange
Stainless Steel
Packing spacer
Austenitic St. St. Type 303
ASTM A 638 Gr 660
KEVLAR + PTFE
Packing
GRAPHITE
Bonnet
Body
Valve body nut
AUSTENITIC STAINLESS STEEL TYPE 316
ASTM A 194 Gr 2H
ASTM A 194 Gr 8M ASTM A 194 Gr 4
Plug pin
316 Stainless Steel
Valve body gasket
Spiral wound 316L St. St. with graphite filler
Seal ring type
See page 12
ASTM A 194 Gr 4
Plug spring
(41400 only)
INCONEL X750
(2 to 4") St. St. Type 316
with hardfacing
13
Austenitic St. St. Type 316 with hardfacing
Seat ring
(6" to 16") St. St. Type
CA6NM with hardfacing
14
15
16
17
19
20
21
22
23
Seat ring gasket
Valve plug
Cage
Spiral wound 316L St. St. with graphite filler
Martensitic St. St. Type 17-4 PH
Consult Masoneilan
Martensitic St. St. Type CA6NM Chrome-plated
Consult Masoneilan
Flat spring ( 6" to 16") INCONEL X750 +shot peening
Martensitic St. St. Type 17-4 PH
INCONEL X750 + shot peening
Retaining ring
(41400 only)
INCONEL X750
Auxiliary plug
Martensitic St. St. Type CA6NM
(41400 only)
with hardfaced and chromium-plated
ASTM A 193 Gr 8M ASTM A 320 Gr L7
Guide bushing
Austenitic St. St. Ty. 316 w. hardfacing
SD CH30004 E - 02/98
41000 Series
(6" to 16") Martensitic St. St. Ty. CA6NM
Martensitic St. St. Type CA6NM
with hardfaced and chrome-plated
w. hardfaced & chromium-plated
Valve body stud
Packing follower
(2" to 4") Martensitic St. St. Type 410
ASTM A 193 Gr B7
Martensitic St. St. Type 440 C
Austenitic St. St. Type 303
11
ASTM A 193 Gr 16
Seal Ring Construction
41300 Series has a Pressure Energized Polymeric Seal
Ring.
41400 and 41500 Series has a Metal Seal Ring.
Leakage Class Ranging from Class II to Class V
are obtainable with temperatures
ranging from -196°C to +566°C.
PLUG
CAGE
36
35
31
PLUG
41600 Series has a TFE Seal Ring and a Resilient Inner
Ring.
Leakage Class IV is standard with temperatures
ranging from -29°C to +149°C.
CAGE
41900 has a Graphite Seal Ring and Metal Inner Ring.
Leakage Class IV is standard with temperatures
ranging from -196°C to +566°C for 6" to 16"
and Class III for 2" to 4".
46
41
45
40
PLUG
CAGE
PLUG
CAGE
DN 50 - DN 400
(2" - 16")
Materials of Construction
Temperature Range
Ref.
No.
31
35
36
40
41
45
46
-196°C
∇
-46°C
∇
-29°C
∇
+149°C
∇
Description
∇
+343°C
∇
+566°C
∇
Materials
Seal Ring
External Seal Ring
Internal Seal Ring
External Seal Ring
Internal Seal Ring
External Seal Ring
Internal Seal Ring
Temperature Range
+232°C
PTFE + 25% graphite and ELGILOY spring
Ni-Resist ASTM A439 Type D3
Ni-Resist ASTM A439 Type D3
PTFE (Bronze)
Nordel
Graphite
Ni-Resist Cast Iron ASTM A439 Type D3
∆
-196°C
∆
-46°C
∆
-29°C
∆
+149°C
12
∆
+232°C
Ni-Resist ASTM A439 Type D3 Nitrited
∆
+343°C
∆
+566°C
SD CH30004 E - 02/98
41000 Series
Optional Trim Types
41512 - 41612- 41912
Single Stage
Multi-hole
Low Noise and Cavitation Protection
DN 50 - DN 100 Shown
(2" - 4")
41413
Multi-hole, Low Noise
and Cavitation Protection
Trim with Internal Diffuser
DN 150 - DN 400
(6" - 16")
41311
Pressure Energized Seal
DN 150 - DN 400 Shown
(6" - 16")
41314
Double Stage
High Attenuation,
Low Noise Trim
DN 50 - DN 100 Shown (2" - 4")
SD CH30004 E - 02/98
41000 Series
13
Allowable Pressure Drops for 41400 Series (bar)
Flow To Close
Models 41411 and 41421
Leakage : IEC 534-4 and ANSI/FCI 70.2, Class IV (V Optional)
Kevlar PTFE Packing
Valve Size - mm (inch)
Rated CV
ANSI Class and equivalent PN Travel
Line
Equal %
150 300,600 900,1500 2500 (mm) full reduced full reduced
AIR TO OPEN
AIR TO CLOSE
Actuator bench‡ net‡‡ supply ∆ P bench‡ net‡‡ supply ∆ P
Size range range (bar) (bar) range range (bar) (bar)
6
10
40
---
35
14
16
---
---
50
(2)
50
(2)
23
20.3
6
---
16
---
10
---
16
10
75
---
65
26
16
23
---
50
(2)
---
80
(3)
38.1
10
---
30
---
16
---
23
16
155
---
140
56
23
---
80
(3)
80
(3)
100
(4)
50.8
16
---
60
---
--23
16
240
---
225
90
23
---
100
(4)
100
(4)
150
(6)
50.8
16
---
95
---
--23
‡
Model 87/88 Actuator
11-23
21-45
11-23
21-45
6-30
11-23
6-30
11-23
11-23
21-45
11-23
21-45
6-30
11-23
11-23
21-45
11-23
21-45
6-30
11-23
11-23
21-45
11-23
21-45
6-30
11-23
21-45
11-23
21-45
21-45
11-23
21-45
21-45
11-23
21-45
21-45
21-45
-
4-23
14-45
7-23
17-45
3-30
8-23
4-30
9-23
4-23
14-45
7-23
17-45
3-30
8-23
5-23
15-45
7-23
17-45
3-30
8-23
5-23
15-45
7-23
17-45
3-30
8-23
13-45
5-23
15-45
13-45
5-23
15-45
13-45
5-23
15-45
13-45
15-45
-
2.0
3.8
2.0
3.8
2.7
1.9
2.7
1.9
1.9
3.7
1.9
3.7
2.6
1.9
2.0
3.8
2.0
3.8
2.7
2.0
2.0
3.8
2.0
3.8
2.7
2.0
3.8
2.0
3.8
3.8
1.9
3.8
3.9
2.0
3.8
3.8
3.8
-
29
57.5
48
96
153
77
220
110
28
56
46
93
148
74
32
64
51
102
147
73
31
62
49
99
142
71
70
51
101
67
48
97
60
43
86
56
81
-
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
21-45
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
21-45
3-22
6-37
3-19
6-34
3-18
6-33
3-22
6-37
3-19
6-34
3-18
6-33
3-21
6-36
3-19
6-34
3-18
6-33
3-21
6-36
3-19
6-34
3-18
6-33
21-48
3-23
6-38
3-21
6-36
3-23
6-38
3-21
6-36
3-23
6-38
3-21
6-36
3-23
6-38
3-21
6-36
21-51
1.9
3.0
1.6
2.8
1.5
2.7
1.9
3.0
1.6
2.8
1.5
2.7
1.8
2.9
1.6
2.7
1.5
2.7
1.8
2.9
1.6
2.7
1.5
2.7
3.8
1.9
3.1
1.7
2.9
1.9
3.1
1.7
2.9
1.9
3.1
1.7
2.9
1.9
3.1
1.7
2.9
4.0
29
57.5
48
96
77
153
28
56
46
93
74
148
32
64
51
102
73
147
31
62
49
99
71
142
142
35
70
50
101
34
67
48
97
30
60
43
86
28
56
40.5
81
81
Nominal bench range of actuator used for specifying actuator on valve data sheet
Actual bench range of valve/actuator assembly, resulting from combined pilot plug load force and actuator nominal bench range
‡‡
Note : Inlet pressure must not exceed the quoted rating for the selected pressure class.
All pressure drops (∆P) shown within this publication reflect actuator capability and shutoff class shown for a particular trim type. It does not
imply proper application with regards to cavitation, noise, critical pressure drop, etc. Consult Masoneilan Handbook for Control Valve Sizing
OZ1000 for more information.
14
SD CH30004 E - 02/98
41000 Series
Allowable Pressure Drops for 41400 Series (bar)
Flow To Close
Models 41411 and 41421
Leakage : IEC 534-4 and ANSI/FCI 70.2, Class IV (V Optional)
Kevlar PTFE Packing
Valve Size - mm (inch)
Travel
ANSI Class and equivalent PN
150 300,600 900,1500 2500 (mm)
Rated CV
AIR TO OPEN
AIR TO CLOSE
Actuator bench‡ net‡‡ supply ∆ P bench‡ net‡‡ supply ∆ P
full reduced full reduced Size range range (bar) (bar) range range (bar) (bar)
Linear
Equal %
16
50.8
400
--
360
144
23
150
(6)
150
(6)
150
(6)
200
(8)
10
20.3
---
165
---
---
16
23
16
63.5
200
(8)
200
(8)
200
(8)
640
---
575
230
23
--16
38.1
---
415
---
--23
76.2
250
(10)
250
(10)
250
(10)
1000
---
900
18
18
24
24
---
---
16
38.1
---
510
---
--23
95.25 1400
300
300
300
(12)
(12)
(12)
---
1260
---
770
---
---
18
18
24
24
---
16
50.8
---
23
400
400
400
(16)
(16)
(16)
101.6 2000
--‡
63.5
Model 87/88 and 37/38 Actuators
---
---
---
---
18
18
24
24
1280
---
---
23
21-45
11-23
21-45
21-45
11-23
21-45
21-45
21-45
21-45
9-41
10-50
9-44
6-40
21-45
21-45
9-28
11-50
6-28
21-45
21-45
12-30
6-30
21-45
-
12-45
5-23
15-45
12-45
5-23
9-45
12-45
9-45
12-45
3-42
3-50
4-44
3-42
9-45
12-45
3-29
6-50
3-30
9-45
12-45
5-30
3-32
12-45
-
4.1
2.2
4.1
4.1
2.8
4.1
4.1
4.1
4.1
4.0
4.1
4.1
4.1
4.1
4.1
2.7
4.1
2.9
4.1
4.1
2.8
3.1
4.1
-
71
60
102
28
60
37
70
8.9
27
52
15
66
86
5.9
9.1
19
14
36
3.4
5.5
8.9
20
1.6
-
3-15
6-30
3-15
6-30
3-15
11-23
3-15
11-23
3-15
11-23
3-15
6-30
3-15
6-30
3-15
11-23
3-15
11-23
7-38
4-45
6-40
4-50
3-15
6-30
11-23
3-15
6-30
11-23
6-27
3-45
6-28
3-25
6-30
11-23
6-30
11-23
3-15
6-30
3-15
6-30
6-30
11-23
3-24
6-39
3-21
6-36
3-29
11-37
3-24
11-32
3-21
11-29
3-28
6-43
3-24
6-39
3-28
11-36
3-24
11-32
7-48
4-56
6-47
4-57
3-28
6-43
11-36
3-24
6-39
11-32
6-38
3-56
6-36
3-33
6-43
11-36
6-39
11-32
3-26
6-41
3-24
6-38
6-39
11-32
2.0
3.1
1.8
2.9
2.4
3.0
2.0
2.6
1.8
2.4
2.3
3.4
2.0
3.1
2.3
2.9
2.0
2.6
3.9
4.1
3.8
4.1
2.3
3.4
2.9
2.0
3.1
2.6
3.0
4.1
2.9
2.6
3.4
2.9
3.1
2.6
2.1
3.3
2.0
3.1
3.1
2.6
Nominal bench range of actuator used for specifying actuator on valve data sheet
Actual bench range of valve/actuator assembly, resulting from combined pilot plug load force and actuator nominal bench range
‡‡
Note : Inlet pressure must not exceed the quoted rating for the selected pressure class.
All pressure drops (∆P) shown within this publication reflect actuator capability and shutoff class shown for a particular trim type. It does not
imply proper application with regards to cavitation, noise, critical pressure drop, etc. Consult Masoneilan Handbook for Control Valve Sizing
OZ1000 for more information.
SD CH30004 E - 02/98
41000 Series
15
20
46
31.5
68
4.1
20
7.8
34
12
49
12
29
19.5
45
4.4
22
7.3
32
45
26
55
36
2.9
7.2
14
4.8
11
21
24
12
34
16
4.8
9.6
7.3
14
6.8
14
9.3
20
4.2
8.2
Allowable Pressure Drops for 41400 Series Lo-dB/Anti-cavitation (bar)
Flow to Close
Models 41412 and 41413
Leakage : IEC 534-4 and ANSI/FCI 70.2, Class IV (V Optional)
Kevlar PTFE Packing
Model 87/88 and 37/38 Actuators
Valve Size - mm (inch)
Rated CV
ator
High
(mm)
Size
150 300,600 900,1500 2500
Capacity Standard Reduced
6
---
---
50
(2)
50
(2)
20.3
30
25
12
10
16
10
---
50
(2)
---
80
(3)
38.1
65
50
16
25
23
16
80
(3)
80
(3)
100
(4)
50.8
100
(4)
100
(4)
150
(6)
50.8
150
150
150
200
(6)
(6)
(6)
(8)
200
200
200
(8)
(8)
(8)
---
120
95
45
23
16
---
‡
195
145
70
23
16
63.5
300
210
AIR TO OPEN
Actu-
ANSI Class and equivalent PN Travel
105
23
---
76.2
500
315
155
---
88.9
650
500
250
250
250
250
(10)
(10)
(10)
300
(12)
300
(12)
300
(12)
---
101.6
---
725
---
400
(16)
400
(16)
---
---
101.6
---
1200
---
18
18
24
18
18
24
24
18
18
24
18
18
24
AIR TO CLOSE
bench‡ net‡‡ supply ∆ P bench‡ net‡‡ supply ∆ P
range range (bar) (bar) range range (bar) (bar)
11-23
21-45
11-23
21-45
6-30
11-23
11-23
21-45
11-23
21-45
6-30
11-23
21-45
11-23
21-45
21-45
11-23
21-45
21-45
11-23
21-45
9-41
10-40
6-40
14-30
13-27
9-30
12-48
12-30
10-34
6-30
12-30
10-34
6-30
4-23
14-45
7-23
17-45
3-30
8-23
5-23
15-45
7-23
17-45
3-30
8-23
13-45
5-23
15-45
13-45
5-23
15-45
12-45
5-23
15-45
3-42
3-40
3-42
6-30
5-27
4-30
7-48
5-30
3-34
3-32
5-30
3-34
3-32
1.9
3.7
1.9
3.7
2.6
1.9
2.0
3.8
2.0
3.8
2.7
2.0
3.8
1.9
3.8
3.8
2.0
3.8
4.1
2.1
4.1
3.8
3.6
3.8
2.6
2.3
2.8
4.1
2.8
3.4
3.1
2.9
3.5
3.3
28
56
47
94
150
75
31
62
50
100
143
72
68
49
98
58
41
83
83
59.5
119
69
63
115
18
15
44
45
19
30
44
13
21
32
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
5-46
10-43
6-40
6-30
5-43
6-30
7-28
6-30
6-30
6-30
6-30
3-22
6-37
3-19
6-34
3-18
6-33
3-21
6-36
3-19
6-34
3-18
6-33
3-23
6-38
3-21
6-36
3-23
6-38
3-21
6-36
3-24
6-39
3-21
6-36
5-57
10-54
6-47
6-41
5-54
6-38
7-36
6-41
6-38
6-41
6-38
1.9
3.0
1.6
2.8
1.5
2.7
1.8
2.9
1.6
2.7
1.5
2.7
1.9
3.1
1.7
2.9
1.9
3.1
1.7
2.9
2.0
3.1
1.8
2.9
4.1
4.1
3.8
3.3
4.1
3.0
2.9
3.3
3.1
3.3
3.1
28
56
47
94
75
150
31
62
50
100
72
143
34
68
49
98
29
58
41
83
26.5
60
41
87
65
71
106
39
39.5
54.5
45
30
43
18
25
Nominal bench range of actuator used for specifying actuator on valve data sheet
Actual bench range of valve/actuator assembly, resulting from combined pilot plug load force and actuator nominal bench range
‡‡
Note : Inlet pressure must not exceed the quoted rating for the selected pressure class.
All pressure drops (∆P) shown within this publication reflect actuator capability and shutoff class shown for a particular trim type. It does not
imply proper application with regards to cavitation, noise, critical pressure drop, etc. Consult Masoneilan Handbook for Control Valve Sizing
OZ1000 for more information.
16
SD CH30004 E - 02/98
41000 Series
Allowable Pressure Drops for 41500, 41600 and 41900 Series (bar)
Flow To Close
Models 41511, 41521, 41611, 41621, 41911 and 41921
41500 Leakage : IEC 534-4 and ANSI/FCI 70.2, Class II (2" - 4")
41600 Leakage : IEC 534-4 and ANSI/FCI 70.2, Class IV
41900 Leakage : IEC 534-4 and ANSI/FCI 70.2, Class III (2" - 4")
Kevlar PTFE Packing
Valve Size - mm (inch)
Rated CV
ANSI Class and equivalent PN Travel
Linear
150 300,600 900,1500 2500 (mm) full reduced
Actuator
reduced Size
Equal %
full
6
40
---
---
50
(2)
50
(2)
---
35
10
14
16
20.3
6
---
16
---
---
10
16
10
75
---
65
16
26
23
---
50
(2)
---
80
(3)
38.1
10
---
30
---
---
16
23
16
155
---
80
(3)
80
(3)
100
(4)
---
140
56
23
50.8
16
---
60
---
--23
16
240
---
100
(4)
100
(4)
150
(6)
---
225
90
23
50.8
16
---
95
---
--23
Model 87/88 Actuator
AIR TO OPEN
bench
range
supply
(bar)
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
1.3
2.6
1.3
2.6
1.3
2.6
1.3
2.6
1.3
2.6
1.3
2.6
1.3
2.6
1.3
2.6
1.3
2.6
1.3
2.6
1.3
2.6
1.3
2.6
1.3
2.6
1.3
2.6
1.3
2.6
1.3
2.6
1.3
2.6
1.3
2.6
1.3
2.6
1.3
2.6
∆P
(bar)
28
55
46
92
73.5
147
27
55
46
91
73
146
30.5
61
49
97.5
70
140
30
60
48
96.5
69
139
33
66.5
48
96
33
65
47
94
28
55
40
80
27
54.5
39
78
AIR TO CLOSE
bench
range
supply
(bar)
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
∆P
(bar)
28
55
46
92
73.5
147
27
55
46
91
73
146
30.5
61
49
97.5
70
140
30
60
48
96.5
69
139
33
66.5
48
96
33
65
47
94
28
55
40
80
27
54.5
39
78
Note : Inlet pressure must not exceed the quoted rating for the selected pressure class.
All pressure drops (∆P) shown within this publication reflect actuator capability and shutoff class shown for a particular trim type. It does not
imply proper application with regards to cavitation, noise, critical pressure drop, etc. Consult Masoneilan Handbook for Control Valve Sizing
OZ1000 for more information.
SD CH30004 E - 02/98
41000 Series
17
Allowable Pressure Drops for 41500, 41600 and 41900 Series (bar)
Flow To Close
Models 41511, 41521, 41611, 41621, 41911 and 41921
41500 Leakage : IEC 534-4 and ANSI/FCI 70.2, Class III (6" - 16")
41600 Leakage : IEC 534-4 and ANSI/FCI 70.2, Class IV
41900 Leakage : IEC 534-4 and ANSI/FCI 70.2, Class IV (6" - 16")
Kevlar PTFE Packing
Model 87/88 and 37/38 Actuators
Valve Size - mm (inch)
ANSI Class and equivalent PN Travel
150
300,600
900,1500
2500
(mm)
AIR TO OPEN
Actuator bench supply ∆ P
full reduced Size range
(bar)
(bar)
Rated CV
Linear
Equal %
full reduced
16
50.8
150
(6)
150
(6)
150
(6)
400
---
360
144
23
200
(8)
16
20.3
---
165
---
--23
16
63.5
640
575
230
23
200
200
200
(8)
(8)
(8)
---
16
38.1
---
415
---
--23
18
76.2
1000
---
900
--24
250
(10)
250
(10)
250
(10)
---
16
38.1
---
510
---
--23
95.25
300
300
300
(12)
(12)
(12)
1400
---
1260
---
18
24
16
--50.8
---
770
---
--23
18
101.6
2000
---
---
--24
400
(16)
400
(16)
400
(16)
16
--63.5
---
1280
---
--23
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
11-23
6-27
6-48
9-41
6-40
6-52
6-30
3-15
6-30
6-27
6-28
6-30
3-15
6-30
6-30
3-15
6-30
6-30
3-15
6-30
-
1.5
2.9
1.5
2.9
1.8
3.5
1.7
3.5
1.4
2.8
1.4
2.7
1.7
3.3
1.7
3.3
2.3
2.5
4.1
3.7
3.7
4.1
3.4
1.7
3.4
2.6
2.6
3.4
1.7
3.4
2.7
1.3
2.6
3.4
1.7
3.4
-
39
78
56
112
39
78
56
112
24
48
34
69
24
48
34
69
34
32
38
49
82
20
36
26
51.5
24
35
27
19.5
39
15
9.8
20
16
12
23
-
AIR TO CLOSE
bench
range
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
6-30
21-45
3-15
6-30
11-23
21-45
6-27
6-48
7-38
6-40
6-52
6-30
21-45
3-15
6-30
11-23
21-45
6-27
6-28
6-30
21-45
3-15
6-30
11-23
21-45
3-15
6-30
3-15
6-30
6-30
21-45
3-15
6-30
11-23
21-45
supply
(bar)
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
2.5
3.6
1.3
2.5
1.9
3.6
2.2
3.6
2.8
3.0
3.9
2.5
3.6
1.3
2.5
1.9
3.6
2.0
2.1
2.5
3.6
1.3
2.5
1.9
3.6
1.2
2.2
1.1
2.1
2.5
3.6
1.3
2.5
1.9
3.6
∆P
(bar)
26.5
60
41
87
13
28
19.5
42
19
46
31
69
19
48
13
29
34
69
33
60
49
81.5
84
13
36
8.8
20
26
51.5
24
35
10
27
6.7
15
19.5
39
8.0
15
9.8
20
6.1
16
4.0
9.2
12
23
Note : Inlet pressure must not exceed the quoted rating for the selected pressure class.
All pressure drops (∆P) shown within this publication reflect actuator capability and shutoff class shown for a particular trim type. It does not
imply proper application with regards to cavitation, noise, critical pressure drop, etc. Consult Masoneilan Handbook for Control Valve Sizing
OZ1000 for more information.
18
SD CH30004 E - 02/98
41000 Series
Allowable Pressure Drops for Single Stage Series Anti-cavitation Trim (bar)
Flow To Close
Models 41512, 41513, 41612, 41613, 41912 and 41913
41500 Leakage : IEC 534-4 and ANSI/FCI 70.2, Class II (2" - 4")
41500 Leakage : IEC 534-4 and ANSI/FCI 70.2, Class III (6" - 16")
41600 Leakage : IEC 534-4 and ANSI/FCI 70.2, Class IV
41900 Leakage : IEC 534-4 and ANSI/FCI 70.2, Class III (2" - 4")
41900 Leakage : IEC 534-4 and ANSI/FCI 70.2, Class IV (6" - 16")
Kevlar PTFE Packing
Model 87/88 and 37/38 Actuators
Valve Size - mm (inch)
ANSI Class and equivalent PN Travel
150
300,600
900,1500
2500
(mm)
Rated CV
High
Capacity Standard Reduced
Actuator
Size
6
---
---
50
(2)
50
(2)
10
20.3
30
25
12
16
23
10
---
50
(2)
---
80
(3)
38.1
65
50
25
16
23
16
80
(3)
80
(3)
100
(4)
50.8
100
(4)
100
(4)
150
(6)
50.8
150
(6)
150
(6)
150
(6)
200
(8)
63.5
200
(8)
200
(8)
200
(8)
---
76.2
500
315
155
250
(10)
250
(10)
250
(10)
---
88.9
650
500
250
300
(12)
300
(12)
300
(12)
---
---
---
120
95
45
23
16
195
145
70
23
16
300
210
105
23
18
18
24
18
101.6
---
725
--24
400
400
(16)
(16)
18
---
101.6
---
1200
--24
AIR TO OPEN
bench
range
supply
(bar)
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
6-48
15-50
6-30
9-40
12-48
6-30
10-34
6-30
6-30
10-34
6-30
-
1.3
2.6
1.3
2.6
1.3
2.6
1.3
2.6
1.3
2.6
1.3
2.6
1.3
2.6
1.3
2.6
1.3
2.6
1.3
2.6
1.3
2.6
1.5
2.9
1.4
2.9
4.1
4.1
2.7
3.6
4.1
2.9
3.2
2.9
3.0
3.3
3.0
-
∆P
AIR TO CLOSE
(bar)
bench
range
supply
(bar)
∆P
(bar)
27
55
46
91
73
146
105
210
30
60
48
96.5
69
139
33
65.5
47
94
27
55
39
79
48
95
68.5
137
62.5
38
34
65
59
30
27
40
21
19
29
-
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-15
6-30
3-13
3-35
6-48
3-15
6-30
3-25
3-9
3-15
6-30
3-15
6-30
3-9
3-15
6-30
3-15
6-30
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.5
1.3
2.0
1.0
2.0
1.1
2.8
3.8
1.3
2.2
1.9
0.8
1.3
2.5
1.1
2.1
0.8
1.3
2.5
1.3
2.5
27
55
46
91
73
146
105
210
30
60
48
96.5
69
139
33
65.5
47
94
27
55
39
79
33
74
51
106
22
48.5
89
19
35
43
7.6
16
31
20
41
5.4
11
22
14
29.5
Note : Inlet pressure must not exceed the quoted rating for the selected pressure class.
All pressure drops (∆P) shown within this publication reflect actuator capability and shutoff class shown for a particular trim type. It does not
imply proper application with regards to cavitation, noise, critical pressure drop, etc. Consult Masoneilan Handbook for Control Valve Sizing
OZ1000 for more information.
SD CH30004 E - 02/98
41000 Series
19
Allowable Pressure Drops for 41300 Series (bar)
Flow To Open
Models 41311, 41321 and 41312
Leakage : IEC 534-4 and ANSI/FCI 70.2, Class IV
Kevlar PTFE Packing
Model 87/88 Actuator
Valve
Size
ANSI Class
Travel
equivalent PN (mm)
and
Rated
CV (1)
Actuator
Size
mm inch
50
50
2
2
600
900
1500
38.1
20.3
3
900
1500
50.8
150
200
4
6
8
900
1500
50.8
600
50.8
900
1500
600
900
1500
E
LO
ou 25
40, 16
DB
L
35
30, 25
E
LO
Allowable pressure
drops (bar)
Allowable pressure drops (bar)
Bench range 3 - 15
Bench range 6 - 30
Bench range
Supply (bar)
Supply (bar)
3 - 15 6 - 30 11 - 23 21 - 45
1.4
1.7
2.4
2.8
10
14.5 103
-
-
96
103
96
103
6
10
83
57.5 139
86
144
172.5
258
57
115.5
86
144
3.1
-
57 138.5 172.5
115.5 231.5 258
140
E
120, 95 LO
16
23
31 142.5 129.5
91 205.5 186.5
258
258
116
171.5
129.5
186.5
16
23
4.5 113.5 108
58 198 156
216
258
81.5
152
108
156
81.5
152
216
258
16
23
81 88.5
28.5 148.5 128
177.5
219
50.5
113
88.5
128
50.5
113
171 177.5
219
-
37
65
91.5 95.5
132.5
175
11
69
65
95.5
11
69
105.5 132.5
152 175
116 237
171.5 258
258
-
ou 45 DB
240, 95 L
600
100
L
65
65, 50
AIR TO CLOSE
ou 12 DB
155, 60 L
600
80
75, 30
AIR TO OPEN (2)
63.5
63.5
225
E
195, 145 LO
ou 70
400
-
DB
L
360
E
300, 210 LO
ou 105 DB
640
L
575
E
16
23
-
(1) L : Linear
E : Equal percentage
Lo-dB Trim
(2) Supply pressure is 0.4 bar (5 psi) over bench range
Note : Inlet pressure must not exceed the quoted rating for the selected pressure class.
Values in italics correspond to throtling delta P limitation for stability. Shutoff delta P is greater, consult Masoneilan.
All pressure drops (∆P) shown within this publication reflect actuator capability and shutoff class shown for a particular trim type. It does not
imply proper application with regards to cavitation, noise, critical pressure drop, etc. Consult Masoneilan Handbook for Control Valve Sizing
OZ1000 for more information.
20
SD CH30004 E - 02/98
41000 Series
Allowable Pressure Drops for 41300 Series (bar)
Flow To Open
Models 41311, 41321 and 41312
Leakage : IEC 534-4 and ANSI/FCI 70.2, Class IV
Kevlar PTFE Packing
Models 41311 and 41321
Valve
Size
AIR TO OPEN
ANSI Class
and
Model 37/38 Actuator
ActuRated
ator
CV (1)
Size
Travel
(mm)
equivalent PN
AIR TO CLOSE
Bench
Supply
∆P
Bench
Supply
∆P
range
(bar)
(bar)
range
(bar)
(bar)
8-30
2.4
138
6-27
10-33
2.2
2.8
75
95
6-30
12-30
2.4
2.4
41
78
3-13
3-13
6-27
6-27
3-14
3-14
6-27
6-27
3-15
3-15
6-30
6-30
1.4
1.7
2.4
2.8
1.4
1.7
2.4
2.8
1.7
2.1
2.8
3.1
62.5
76.5
78
138
10.5
70.5
47.5
95
40
57
39
78
mm inch
1000
600
250
10
900
1500
400
900
1500
12
600
900
E
1400
L
1260
E
18
95.3
300
16
18
76.2
600
300
L
101.6
2000
L
18
(1) L : Linear ; E : Equal percentage
Model 41312
Valve
Size
Model 37/38 Actuator
AIR TO OPEN
ANSI Class
and
Travel
Rated
(mm)
CV
equivalent PN
Actuator
Size
AIR TO CLOSE
Bench
Supply
∆P
Bench
Supply
∆P
range
(bar)
(bar)
range
(bar)
(bar)
8-30
15-50
2.4
3.8
146.5
175
6-30
10-30
2.4
2.4
104.5
136
6-30
12-30
2.4
2.4
75
95
6-30
12-30
2.4
2.4
41
78
3-13
3-13
6-27
6-27
6-27
3-15
3-15
6-30
6-30
3-15
6-30
6-30
3-15
3-15
6-30
6-30
1.4
1.7
2.4
2.8
3.1
1.4
1.7
2.8
3.1
2.1
2.8
3.1
1.7
2.1
2.8
3.1
88
89.5
97
156.5
175
7.0
90.5
113.5
138
75
74
95
40
57
39
78
mm inch
200
8
600
900
76.2
315
18
1500
600
250
300
400
10
12
16
900
1500
88.9
500
600
900
600
101.6
101.6
725
1200
18
18
18
Note : Inlet pressure must not exceed the quoted rating for the selected pressure class.
Values in italics correspond to throtling delta P limitation for stability. Shutoff delta P is greater, consult Masoneilan.
All pressure drops (∆P) shown within this publication reflect actuator capability and shutoff class shown for a particular trim type. It does not
imply proper application with regards to cavitation, noise, critical pressure drop, etc. Consult Masoneilan Handbook for Control Valve Sizing
OZ1000 for more information.
SD CH30004 E - 02/98
41000 Series
21
Allowable Pressure Drops for 41300 (bar)
Flow To Open
Models 41311, 41321 and 41312
Leakage : IEC 534-4 and ANSI/FCI 70.2, Class V
Kevlar PTFE Packing
Model 87/88 Actuator
Valve
Size
AIR TO OPEN (2)
AIR TO CLOSE
Allowable pressure
drops (bar)
Allowable pressure drops (bar)
Rated
Bench range 3 - 15
Bench range 6 - 30
CV
Bench range
Supply (bar)
Supply (bar)
ANSI Class
Travel
equivalent PN (mm)
and
Actuator
(1) Size
mm inch
50
50
80
2
2
3
3 - 15 6 - 30 11 - 23 21 - 45
600
900
1500
600
900
38.1
20.3
100
4
50.8
50.8
1500
150
200
6
8
600
900
L
65
65, 50
E
LO
ou 25
40, 16
DB
L
35
30, 25
E
LO
-
2.4
2.8
3.1
3.5
103
-
-
103
-
-
86
-
-
31.5
258
172
-
-
-
-
194.5 258
258
-
-
81
156
108
-
-
81
258
216
-
-
160.5
219 128
88.5
-
-
134.5 177.5
178 219
-
33.5
175
7.5
95.5
65
-
10
-
-
103
6
10
-
-
172.5 31.5
130.5 258 144
16
23
-
-
35
186.5
16
23
-
-
109
16
23
-
-
15
16
23
-
-
-
3.8
ou 12 DB
155, 60 L
1500
600
900
75, 30
2.1
50.8
140
E
120, 95 LO
ou 45 DB
240, 95
225
L
E
195, 145 LO
ou 70 DB
400
360
L
E
1500
300, 210 LO
63.5
ou 105 DB
600
900
1500
63.5
640
575
L
E
(1) L : Linear
E : Equal percentage
258 129.5
258 186.5
216
258
51
51
7.5
175
120
-
Lo-dB Trim
(2) Supply pressure is 0.4 bar (5 psi) over bench range
Note : Inlet pressure must not exceed the quoted rating for the selected pressure class.
Values in italics correspond to throtling delta P limitation for stability. Shutoff delta P is greater, consult Masoneilan.
All pressure drops (∆P) shown within this publication reflect actuator capability and shutoff class shown for a particular trim type. It does not
imply proper application with regards to cavitation, noise, critical pressure drop, etc. Consult Masoneilan Handbook for Control Valve Sizing
OZ1000 for more information.
22
SD CH30004 E - 02/98
41000 Series
Allowable Pressure Drops for 41300 Series (bar)
Flow To Open
Models 41311, 41321 and 41312
Leakage : IEC 534-4 and ANSI/FCI 70.2, Class V
Kevlar PTFE Packing
Models 41311 and 41321
Valve
Size
AIR TO OPEN
ANSI Class
and
Model 37/38 Actuator
Travel
(mm)
equivalent PN
ActuRated
ator
CV (1)
Size
AIR TO CLOSE
Bench
Supply
∆P
Bench
Supply
∆P
range
(bar)
(bar)
range
(bar)
(bar)
15-50
20-50
3.8
3.8
10.5
138
2.4
2.8
3.5
3.8
3.1
3.8
3.5
24.5
76.5
45.5
138
70.5
37
95
3.1
76
mm inch
600
250
10
900
1500
400
12
900
1500
300
600
16
L
900
E
1400
L
18
-
-
-
1260
E
24
16-45
3.5
95
3-13
3-13
6-27
6-27
3-14
6-27
6-28
2000
L
24
18-50
3.8
52
3-15
18
76.2
600
300
1000
95.3
101.6
(1) L : Linear
E : Equal percentage
Model 41312
Valve
Size
Model 37/38 Actuator
AIR TO OPEN
ANSI Class
and
Travel
(mm)
equivalent PN
Rated
CV
Actuator
Size
AIR TO CLOSE
Bench
Supply
∆P
Bench
Supply
∆P
range
(bar)
(bar)
range
(bar)
(bar)
15-50
20-50
3.8
3.8
111
175
-
-
-
19-46
3.5
138
18
-
-
-
24
24
18-50
18-50
3.8
3.8
95
52
3-13
6-27
6-27
6-27
3-15
3-15
6-30
6-30
3-15
3-15
3-15
3-15
2.4
3.1
3.5
3.8
2.8
3.1
3.1
3.5
3.1
3.5
2.8
3.1
89.5
21
143
175
77.5
90.5
8.5
138
38
75
95
76
mm inch
600
200
8
250
10
900
1500
76.2
315
88.9
500
18
600
300
12
400
16
900
1500
600
900
600
18
24
101.6
725
101.6
1200
Note : Inlet pressure must not exceed the quoted rating for the selected pressure class.
Values in italics correspond to throtling delta P limitation for stability. Shutoff delta P is greater, consult Masoneilan.
All pressure drops (∆P) shown within this publication reflect actuator capability and shutoff class shown for a particular trim type. It does not
imply proper application with regards to cavitation, noise, critical pressure drop, etc. Consult Masoneilan Handbook for Control Valve Sizing
OZ1000 for more information.
SD CH30004 E - 02/98
41000 Series
23
Allowable Pressure Drops for 41300 Series (bar)
Flow To Open
Model 41314
Leakage : IEC 534-4 and ANSI/FCI 70.2, Class IV
Kevlar PTFE Packing
Valve
Size
ANSI Class
and
Travel
equivalent PN (mm)
Rated
CV
Actuator
Size
mm inch
50
2
Model 87/88 Actuator
AIR TO OPEN (1)
AIR TO CLOSE
Allowable pressure
drops (bar)
Allowable pressure drops (bar)
Bench range 3 - 15
Bench range 6 - 30
Bench range
Supply (bar)
Supply (bar)
3 - 15 6 - 30 11 - 23 21 - 45
600
900
1.4
1.7
2.4
2.8
3.1
144
258
115.5
144
115.5 231.5 258
16
88 209.5 183
258
174.5
183
174.5 258
-
125
16
23
31 142.5 129.5
91 205.5 186.5
258
258
116
171.5
129.5
186.5
116 237
171.5 258
258
-
150
16
23
4.5 113.5 108
58 198 156
216
219
81.5
152
108
156
38.1
35
10
50.8
65
63.5
63.5
57.5 139
1500
80
3
600
900
1500
100
4
600
900
1500
150
6
600
900
1500
81.5
152
216
219
-
(1) Supply pressure is 0.4 bar (5 psi) over bench range
Model 37/38 Actuator
Valve
Size
AIR TO OPEN
ANSI Class
and
Travel
(mm)
equivalent PN
Rated
CV
Actuator
Size
AIR TO CLOSE
Bench
Supply
∆P
Bench
Supply
∆P
range
(bar)
(bar)
range
(bar)
(bar)
8-30
15-50
2.4
3.8
146.5
175
6-30
10-30
2.4
2.4
104.5
132.5
6-30
12-30
2.4
2.4
75
95
6-30
12-30
2.4
2.4
41
78
3-13
3-13
6-27
6-27
6-27
3-15
3-15
6-30
6-30
3-15
6-30
6-30
3-15
3-15
6-30
6-30
1.4
1.7
2.4
2.8
3.1
1.4
1.7
2.8
3.1
2.1
2.8
3.1
1.7
2.1
2.8
3.1
88
89.5
97
156.5
175
2.5
88
102
138
75
74
95
40
57
39
78
mm inch
8
600
900
1500
250
10
600
900
1500
101.6
410
18
300
12
600
900
101.6
600
18
200
400
16
600
76.2
101.6
300
800
18
18
Note : Inlet pressure must not exceed the quoted rating for the selected pressure class.
Values in italics correspond to throtling delta P limitation for stability. Shutoff delta P is greater, consult Masoneilan.
All pressure drops (∆P) shown within this publication reflect actuator capability and shutoff class shown for a particular trim type. It does not
imply proper application with regards to cavitation, noise, critical pressure drop, etc. Consult Masoneilan Handbook for Control Valve Sizing
OZ1000 for more information.
SD CH30004 E - 02/98
41000 Series
24
Allowable Pressure Drops for 41300 Series (bar)
Flow To Open
Models 41314
Leakage : IEC 534-4 and ANSI/FCI 70.2, Class V
Kevlar PTFE Packing
Valve
Size
ANSI Class
Travel
equivalent PN (mm)
and
Rated
CV
Actuator
Size
mm inch
50
2
Model 87/88 Actuator
AIR TO OPEN (1)
AIR TO CLOSE
Allowable pressure
drops (bar)
Allowable pressure drops (bar)
Bench range 3 - 15
Bench range 6 - 30
Bench range
Supply (bar)
Supply (bar)
3 - 15 6 - 30 11 - 23 21 - 45
600
900
2.1
2.4
2.8
3.1
3.4
38.1
35
10
-
-
130.5
258
144
-
87.5
258
-
50.8
65
16
-
-
183
258
183
-
165
258
-
63.5
125
16
23
-
-
35
186.5
258
258
129.5
186.5
-
63.5
150
16
23
-
-
109
216
219
81
156
108
-
1500
80
3
600
900
1500
100
4
600
900
1500
150
6
600
900
1500
194.5 258
173.5 258
-
61.5
216
-
81
219
(1) Supply pressure is 0.4 bar (5 psi) over bench range
Model 37/38 Actuator
Valve
Size
AIR TO OPEN
ANSI Class
Travel
Rated
CV
Actuator
Size
AIR TO CLOSE
Bench
Supply
∆P
Bench
Supply
∆P
range
(bar)
(bar)
range
(bar)
(bar)
15-50
20-50
3.8
3.8
111
175
18
-
-
-
3-13
6-27
6-27
6-27
3-15
3-15
2.4
3.1
3.5
3.8
2.8
3.1
89.5
21
143
175
51
88
1500
24
19-46
3.5
138
6-30
3.5
107.5
101.6
600
18
-
-
-
101.6
800
24
24
18-50
18-50
3.8
3.8
95
52
3-15
3-15
3-15
3-15
3.1
3.5
2.8
3.1
38
75
95
76
and
(mm)
equivalent PN
mm inch
200
8
600
900
76.2
300
101.6
410
18
1500
250
10
600
900
300
12
600
900
400
16
600
Note : Inlet pressure must not exceed the quoted rating for the selected pressure class.
Values in italics correspond to throtling delta P limitation for stability. Shutoff delta P is greater, consult Masoneilan.
All pressure drops (∆P) shown within this publication reflect actuator capability and shutoff class shown for a particular trim type. It does not
imply proper application with regards to cavitation, noise, critical pressure drop, etc. Consult Masoneilan Handbook for Control Valve Sizing
OZ1000 for more information.
SD CH30004 E - 02/98
41000 Series
25
Allowable Pressure Drops for 41500, 41600 and 41900 Series (bar)
Flow To Open
Models 41511, 41521, 41611, 41621, 41911 and 41921
Models 41512, 41513, 41612, 41613, 41912 and 41913
41500 Leakage : IEC 534-4 and ANSI/FCI 70.2, Class II (2" - 4")
41500 Leakage : IEC 534-4 and ANSI/FCI 70.2, Class III (6" - 16")
41600 Leakage : IEC 534-4 and ANSI/FCI 70.2, Class IV
41900 Leakage : IEC 534-4 and ANSI/FCI 70.2, Class III (2" - 4")
41900 Leakage : IEC 534-4 and ANSI/FCI 70.2, Class IV (6" - 16")
Kevlar PTFE Packing
Valve
Size
ANSI Class
and
Travel
equivalent PN (mm)
Rated
CV (1)
Actuator
Size
mm inch
50
50
80
2
2
3
4
150
6
200
8
250
10
300
12
400
16
AIR TO OPEN (2)
AIR TO CLOSE
Allowable pressure
drops (bar)
Allowable pressure drops (bar)
Bench range 3 - 15
Bench range 6 - 30
Bench range
Supply (bar)
Supply (bar)
3 - 15 6 - 30 11 - 23 21 - 45
600
900
1500
600
900
1500
38.1
20.3
50.8
600
100
Model 87/88 Actuator
900
1500
50.8
600
50.8
900
1500
600
900
1500
600
900
1500
600
900
1500
600
900
75, 30
65
L
E
65, 50
ou 25
LO
DB
40, 16
35
L
E
30, 25
ou 12
LO
DB
155, 60
140
L
E
120, 95 LO
ou 45 DB
240, 95
225
L
E
195, 145 LO
ou 70 DB
400
360
L
E
300, 210 LO
63.5
ou 105 DB
640
L
575
E
38.1
510
50.8
63.5
63.5
1.7
2.4
2.8
3.1
3.5
3.8
10
-
20
46
97.5
46
-
46
74
97.5
-
16
12
43
77.5
103
77.5
-
78.5
103
-
-
23
26
67.5
103
-
103
-
103
-
-
-
6
-
12.5
42
95.5
36
44.5
36
65
90.5 97.5
10
7.0
36
81.5
159.5
75
81.5
75
114
152 163.5
16
24
70.5 129.5
258
109
158
52.5
77.5
53
79
- 15.5 27.5
7.0 29.5 42
59.5
87
27.5
42
-
36.5 59.5
59
87
-
-
15 16.5
4.5 31.5 25
36.5
54
16.5
25
-
36.5
54
-
-
-
27
41
-
-
-
-
16
23
3.5 24.5
12.5 43.5
16
23
16
23
53
79
253 120.5 129.5 120.5 180.5 241
52.5 80.5 107.5 109
77.5 116.5 155 158
16
23
-
5.0
16
11.5
18.5
27
41
11.5
18.5
-
21
38.5
L
16
23
-
1.5
9.5
9.0
15
22
33.5
9.0
15
-
13.5 22
26.5 33.5
770
L
16
23
-
4.0
5.0
8.0
12
18
5.0
8.0
-
7.0
15.5
12
18
-
-
1280
L
16
23
-
1.0
3.5
6.0
8.5
13
3.0
6.0
3.5
-
3.0
8.5
8.5
13
-
-
1500
(1) L : Linear ; E : Equal percentage
(2) Supply pressure is 0.4 bar (5 psi) over bench range
Lo-dB Trim
Note : Inlet pressure must not exceed the quoted rating for the selected pressure class.
Values in italics correspond to throtling delta P limitation for stability. Shutoff delta P is greater, consult Masoneilan.
All pressure drops (∆P) shown within this publication reflect actuator capability and shutoff class shown for a particular trim type. It does not
imply proper application with regards to cavitation, noise, critical pressure drop, etc. Consult Masoneilan Handbook for Control Valve Sizing
OZ1000 for more information.
SD CH30004 E - 02/98
41000 Series
26
Allowable Pressure Drops for 41500, 41600 and 41900 Series (bar)
Flow To Open
Models 41511, 41521, 41611, 41621, 41911 and 41921
Models 41512, 41513, 41612, 41613, 41912 and 41913
41500 Leakage : IEC 534-4 and ANSI/FCI 70.2, Class III (10" - 12")
41600 Leakage : IEC 534-4 and ANSI/FCI 70.2, Class IV
41900 Leakage : IEC 534-4 and ANSI/FCI 70.2, Class IV (10" - 12")
Kevlar PTFE Packing
Models 41511, 41521, 41611, 41621, 41911 and 41921
Valve
Size
AIR TO OPEN
ANSI Class
and
Model 37/38 Actuator
Travel
(mm)
equivalent PN
ActuRated
ator
CV (1)
Size
AIR TO CLOSE
Bench
Supply
∆P
Bench
Supply
∆P
range
(bar)
(bar)
range
(bar)
(bar)
6-48
3.8
16
3.8
3.8
3.8
13.5
31
61
mm inch
250
10
600
900
76.2
1500
300
400
12
16
600
900
1500
600
900
95.25
101.6
1000
L
18
900
E
24
6-40
3.1
28
3-13
8-30
6-40
1400
L
1260
E
18
24
6-27
6-28
2.4
2.4
8.5
16.5
3-30
6-28
3.8
3.8
22.5
24.5
18
10-34
6-30
2.8
2.4
12
9.5
6-30
3-15
6-30
3.4
1.7
3.1
13.5
8.5
19
2000
1500
L
24
(1) L : Linear
E : Equal percentage
Models 41512, 41513, 41612, 41613, 41912 and 41913
Valve
Size
AIR TO OPEN
ANSI Class
and
Model 37/38 Actuator
Travel
Rated
(mm)
CV
equivalent PN
Actuator
Size
AIR TO CLOSE
Bench
Supply
∆P
Bench
Supply
∆P
range
(bar)
(bar)
range
(bar)
(bar)
6-48
15-50
6-52
6-30
3.8
3.8
3.8
2.8
24
60
40.5
16
9-30
13-50
10-34
6-30
2.4
3.8
2.8
2.8
41.5
71
17.5
16.5
3-13
3-35
6-40
3-15
6-30
6-30
3.8
3.8
3.8
3.8
3.8
3.5
17
61.5
79
17
34.5
49
10-34
6-30
2.8
2.4
12
9.5
6-30
3-15
6-30
6-30
3-15
6-30
3.5
1.7
3.1
3.5
1.7
3.1
18.5
12
26
13.5
8.5
19
mm inch
600
200
250
8
10
900
1500
600
900
76.2
315
18
24
18
88.9
500
24
1500
18
300
12
600
900
1500
101.6
725
400
16
600
900
1500
101.6
1200
24
18
24
Note : Inlet pressure must not exceed the quoted rating for the selected pressure class.
Values in italics correspond to throtling delta P limitation for stability. Shutoff delta P is greater, consult Masoneilan.
All pressure drops (∆P) shown within this publication reflect actuator capability and shutoff class shown for a particular trim type. It does not
imply proper application with regards to cavitation, noise, critical pressure drop, etc. Consult Masoneilan Handbook for Control Valve Sizing
OZ1000 for more information.
SD CH30004 E - 02/98
41000 Series
27
Dimensions (mm)
Butt, Socket Weld
or Screwed Ends
Flanged
Body S/A
Pressure Class
ANSI Class 150
ANSI Class 300
and equivalent PN and equivalent PN
Valve Size
mm
inch
50
2
80
3
80x50x80
3x2x3
100
4
100x50x100
4x2x4
100x80x100
4x3x4
150
6
A
ANSI Class 600
and equivalent PN
ANSI Class 900
and equivalent PN
RF
RTJ
BW
&
SW
RF
RTJ
BW
&
SW
RF
RTJ
BW
&
SW
RF
RTJ
-
-
390
267
283
390
286
289
398
375
378
-
-
434
318
334
434
337
340
434
441
445
“
“
“
“
“
(a)
(a)
(a)
492
369
384
492
394
397
492
511
514
-
-
“
“
“
“
“
“
(a)
(a)
(a)
“
“
“
“
“
“
492
511
514
451
464
560
473
489
560
508
511
680
714
717
“
150x80x150
6x3x6
“
“
“
“
“
“
“
“
“
150x100x150
6x4x6
“
“
“
“
“
“
“
“
“
656
569
584
656
610
613
854
915
918
“
“
“
“
“
“
“
“
“
200
8
200x100x200
8x4x8
200x150x200
8x6x8
250
10
543
556
“
“
“
“
“
“
“
“
“
673
686
802
708
724
802
752
755
892
1092
1095
“
“
“
“
“
“
737
750
822
775
791
822
819
822
1034
1130
1133
“
“
“
“
“
“
“
“
“
1016
1029
1002
1057
1072
(a)
1108
1111
1600
1375
1384
“
“
“
(a)
“
“
(a)
(a)
(a)
250x150x250 10x6x10
300
12
300x200x300 12x8x12
400
16
400x300x400 16x12x16
(a) Consult Masoneilan
28
SD CH30004 E - 02/98
41000 Series
Dimensions (mm)
Body S/A
A
Pressure Class
ANSI Class 1500
ANSI Class 2500
and equivalent PN and equivalent PN
mm
inch
BW
&
SW
50
2
398
375
378
80
3
434
460
464
80x50x80
3x2x3
(a)
(a)
(a)
Valve Size
RF
RTJ
BW
&
SW
RF
RTJ
388
400
403
(a)
(a)
(a)
B max
C max
All
All
Classes Classes
94
250
93
300
“
“
100
4
492
531
533
(a)
(a)
(a)
112
330
100x50x100
4x2x4
(a)
(a)
(a)
-
-
-
“
“
100x80x100
4x3x4
492
531
533
-
-
-
“
“
150
6
680
768
774
760
(a)
(a)
166
394
150x80x150
6x3x6
“
“
“
-
-
-
“
“
150x100x150
6x4x6
“
“
“
-
-
-
“
“
200
8
854
972
981
(a)
(a)
(a)
205
521
200x100x200
8x4x8
“
“
“
-
-
-
“
“
200x150x200
8x6x8
“
“
“
-
-
-
250
10
892
1168 1178 1168
250x150x250 10x6x10
300
12
300x200x300 12x8x12
400
16
400x300x400 16x12x16
(a)
(a)
(a)
(a)
1218 1234
(a)
-
(a)
Note : For AFNOR and DIN dimensions, consult Masoneilan
(a) Consult Masoneilan
SD CH30004 E - 02/98
41000 Series
-
-
(a)
1508 1530
(a)
-
-
29
-
-
“
“
247
571
“
“
359
626
“
“
449
694
“
“
Dimensions (mm)
Shown with optional handwheel
Model 87/88 Spring Diaphragm Actuator
Actuator Size
P
R
S
T
6
292
394
254
228
10
16
23
368
476
549
497
717
780
277
330
381
305
457
457
Actuator removal clearance = 150 mm
30
SD CH30004 E - 02/98
41000 Series
Dimensions (mm)
Direct (37)
Air to Close
Reverse (38)
Air to Open
Direct (37)
Air to Close
Reverse (38)
Air to Open
Type 8A
Handwheel
Model 37/38 Spring Diaphragm Actuator
Top-Mounted Handwheel
Actuator
Size
Actuator
Removal
Clearance
D
E
Dir.
F
Rev.
Type
G
H
Dir.
J
Rev.
18 with 16" Spring
18 with 20" Spring
24
142
142
127
527
527
699
843
881
1069
1321
1156
8A
8A
8A
203
203
305
1346
1346
1346
1346
1473
* 1/2" NPT for No. 24 Actuator
SD CH30004 E - 02/98
41000 Series
31
Weights (kg)
Body S/A Weights
Valve
Size
mm inch
50
80
100
150
200
250
300
400
2
3
4
6
8
10
12
16
Threaded / Welded Connection
Flanged Connection
ANSI Class
ANSI Class
ANSI Class
ANSI Class
ANSI Class
ANSI Class
ANSI Class
ANSI Class
ANSI Class
150, 300 and
600 and
900 and
1500 and
2500 and
600 and
900 and
1500 and
2500 and
equivalent PN equivalent PN equivalent PN equivalent PN equivalent PN equivalent PN equivalent PN equivalent PN equivalent PN
45
100
165
245
418
630
980
1454
45
100
169
260
439
677
1015
1506
65
147
240
526
692
1066
1497
-
65
160
248
536
816
1270
1769
-
69
182
299
657
997
-
36
84
127
234
353
547
954
1412
39
113
185
394
701
714
1211
-
39
113
185
394
701
973
1320
-
39
118
222
471
845
-
Model 87/88 Spring Diaphragm Actuator
Size
Standard
With Handwheel
6
10
16
23
20
38
95
120
27
48
111
154
Model 37/38 Spring Diaphragm Actuator
Size
Standard
With Handwheel
Direct
Reverse
Direct
Reverse
18 (16)
86
167
104
186
18 (20)
24
147
204
245
179
222
276
32
SD CH30004 E - 02/98
41000 Series
Accessories and Options
Accessories
77-4 or 77-40 Airset
(See Bulletin 78 E)
77-6 Lockup Valve
2'' Gauge 0-2 bar
Side Mounted Handwheels
For 87/88 Actuators
(See Specification Data CR8788 E)
Top Mounted Handwheels
For 37/38 Actuators
(See Specification Data CR3000)
496 Rotary Electric Switches
496-1 (1-Switch SPDT)
496-2 (2-Switches SPDT)
496-3 Potentiometer Position Transmitter
496-4 (1-Proximity Detector)
496-5 (2-Proximity Detectors)
496-6 (1-Switch DPDT)
496-7 (2-Switches DPDT)
496-8 Opto-electronic Position Transmitter
(See Specification Data CS7050 E)
4700 P Series Pneumatic Positioner
Instrument signals
0.2-1 and 0.4-2 bar
3-15 and 6-30 psig
Split range
4700 E Series Electropneumatic Positioner
8013 Series Electropneumatic Positioner
Input range 4-20 mA
Split range
Other Limit Switches
7000 Electropneumatic (I/P) Transducer
Input range 4-20 mA
Split range
Output
0.2-1 bar, adjustable
0.4-2 bar, adjustable
3-15 psi, adjustable
6-30 psi, adjustable
(See TS-Model 7000)
Solenoid Valves
Options
Extension Bonnets
Environmental Capabilities (LE Packing)
Lubricator & Isolation Valve
Other Flange Facings
Limit Stops
Body Drain Plug
Reducer and Nipple Connections
NACE Compliance
Custom Trim Materials
U.O.P. Trim Materials
Other Materials
Soft Seat (IEC 534-4 and ANSI Class VI)
Non-Destructive Examination
Oxygen Cleaning
Electric Actuators
Smart Valve Interface (SVI®)
Smart Positioner and Smart Valve Process
Controller
Input range 4-20 mA
Split range
HART Communication
(See Brochure BW1000 E)
ValVue Software
Calibration, Configuration, Diagnostic, and Operator Interface Tool
(See Brochure BW1000 E)
For additional Accessories and Options,
consult Masoneilan
2700 Controllers
(See Bulletin 213 E)
SD CH30004 E - 02/98
41000 Series
33
Notes
34
SD CH30004 E - 02/98
41000 Series
Notes
SD CH30004 E - 02/98
41000 Series
35