Type ST-C Cables
Extra Hard Service Thermoplastic Insulated, C: Common Use
Description
Multi-conductor Cable, two, three or four flexible soft copper conductors
polyolefin insulated, twisted and external PVC Rubber jacket
Construction
Conductor
Flexible soft copper conductor, Class K stranded
Insulation
Polyolefin (75° C)
Jacket
Flame retardant Polyvinyl Chloride with content of rubber
Characteristics
Operating Temperature
75° C.
Operating Voltage
600 V.
Applications
Hard Service Cord for equipment and portable tools, special for factories, scenes and
display cabinets. Open wiring installation, in portable extensions with terminals.
By being of common use, it can be used like portable cord, control and power cable.
Easy handling and flexibility in reduced spaces.
Specifications
CENTELSA ST-C Cables are manufactured under the following standards:
UL 1581, NTC-3203 Reference Standard for Electrical Wires, Cables and Flexible
Cords
UL 62, NTC-2356 Flexible Cord and Fixture Wire.
CENTELSA Specifications for ST-C Cables
7
Certifications
CENTELSA ST-C Flexible cords are certified by:
CIDET (Colombia). Cert. No. 02005, according to RETIE (Colombian Technical
Code of Electrical Installations) requirements
Colors
Conductors identification: 2, black-white; 3, black-white-green; 4, blackwhite-red-green. Black colored Jacket.
Packaging
Wood Reels. Reel lengths between 500 m and 2500 m.
Note: Other configurations, sizes, colors and length not specified herein
are available upon request.
8
Flexible Cord Type ST-C 600V, 60oC (International System Unit)
Extra Hard Service Thermoplastic Insulated, C: Common Use
Standards: UL 62, NTC 2356 and CENTELSA specifications for ST-C cables
SIZE
AWG
20
18
16
14
12
10
8
6
4
2
COPPER CONDUCTOR
CONDUCTORS
STRANDS STRAND SECTION
No.
DIAMETER
(mm2)
(mm)
2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
DIAMETER
(mm)
INSULATION JACKET
OVERALL
THICKNESS THICKNESS DIAMETER
(mm)
(mm)
(mm)
APPROX.
TOTAL
WEIGHT
(kg/km)
DC
RESISTANCE
AT 20°C 1
(ohm/km)
0.76
0.76
0.76
0.76
0.76
0.76
0.76
0.76
0.76
0.76
0.76
0.76
0.76
0.76
1.14
1.14
1.14
1.52
1.52
1.52
2.03
2.03
2.03
2.03
2.41
2.41
2.41
2.41
2.41
2.41
50
59
70
69
82
99
86
104
127
113
139
171
152
190
255
231
288
382
380
476
630
635
790
976
902
1133
1407
1254
1600
2003
35.4
35.4
35.4
22.1
22.1
22.1
13.6
13.6
13.6
8.63
8.63
8.63
5.45
5.45
5.45
3.40
3.40
3.40
2.11
2.11
2.11
1.33
1.33
1.33
0.843
0.843
0.843
0.532
0.532
0.532
10
0.254
0.51
0.97
0.64
16
0.254
0.81
1.23
0.76
26
0.254
1.32
1.51
0.76
41
0.254
2.08
1.98
0.76
65
0.254
3.29
2.52
0.76
104
0.254
5.27
3.21
0.76
168
0.254
8.51
3.66
1.14
266
0.254
13.48
4.77
1.52
420
0.254
21.28
6.00
1.52
665
0.254
33.70
7.56
1.52
6.26
6.62
7.23
7.26
7.70
8.43
7.82
8.30
9.11
8.76
9.32
10.24
9.84
10.48
12.32
12.00
12.74
14.78
15.25
16.19
18.77
20.05
21.28
23.33
23.29
24.71
27.08
26.41
28.07
30.85
AMPACITY 2
(A) 3
AMPACITY 2
(A) 4
2
-
10
7
13
10
18
15
25
20
30
25
40
35
55
45
70
60
95
80
Notes: 1. DC Resistance calculated based on a 17.241 ohm-mm2/km copper resistivity.
2. Ampacities based on 75°C conductor temperature, and Section 400 of NEC (NTC 2050) and 30°C ambient temperature.
3. Two current carrying conductors.
4. Three current carrying conductors.
5. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
9
Flexible Cord Type ST-C 600V, 60oC
Extra Hard Service Thermoplastic Insulated, C: Common Use
Standards: UL 62, NTC 2356 and CENTELSA specifications for ST-C cables
SIZE
AWG
20
18
16
14
12
10
8
6
4
2
COPPER CONDUCTOR
CONDUCTORS
STRANDS STRAND SECTION
No.
DIAMETER
(kcmil)
(mils)
2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
DIAMETER
(mils)
INSULATION JACKET
OVERALL
THICKNESS THICKNESS DIAMETER
(mils)
(mils)
(mils)
10
10.0
1.00
38
25
16
10.0
1.60
48
30
26
10.0
2.60
59
30
41
10.0
4.10
78
30
65
10.0
6.50
99
30
104
10.0
10.40
126
30
168
10.0
16.80
144
45
266
10.0
26.60
188
60
420
10.0
42.00
236
60
665
10.0
66.50
298
60
30
30
30
30
30
30
30
30
30
30
30
30
30
30
45
45
45
60
60
60
80
80
80
80
95
95
95
95
95
95
246
261
284
286
303
332
308
327
359
345
367
403
387
413
485
472
502
582
600
637
739
789
838
919
917
973
1066
1040
1105
1215
APPROX.
TOTAL
WEIGHT
(lb/kft)
DC
RESISTANCE
AT 20°C 1
(ohm/kft)
33
39
47
46
55
67
58
70
85
76
93
115
102
128
172
155
194
256
256
320
423
427
531
656
606
761
945
843
1075
1346
10.8
10.8
10.8
6.74
6.74
6.74
4.15
4.15
4.15
2.63
2.63
2.63
1.66
1.66
1.66
1.04
1.04
1.04
0.642
0.642
0.642
0.406
0.406
0.406
0.257
0.257
0.257
0.162
0.162
0.162
AMPACITY 2
(A) 3
AMPACITY 2
(A) 4
2
-
10
7
13
10
18
15
25
20
30
25
40
35
55
45
70
60
95
80
Notas: 1. DC Resistance calculated based on a 10.371 ohm-cmil/ft copper resistivity.
2. Ampacities based on 75°C conductor temperature, and Section 400 of NEC (NTC 2050) and 30°C ambient temperature.
3. Two current carrying conductors.
4. Three current carrying conductors.
5. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
10
Flexible Cords Type ST
Extra Hard Service Thermoplastic Insulated
Description
Multi-conductor Cable, two, three or four flexible soft copper conductors polyvinyl
chloride (PVC) insulated, twisted and external PVC jacket
Construction
Conductor
Flexible soft copper conductor, Class K stranded
Insulation
Flame Retardant Polyvinyl chloride (PVC 60° C)
Jacket
Flame Retardant Polyvinyl chloride (PVC 60° C)
Characteristics
Operating Temperature
60° C.
Operating Voltage
600 V.
Applications
Hard Service Cord for equipment and portable tools, special for factories, scenes and
display cabinets. Open wiring installation, in portable extensions with terminals.
Specifications
CENTELSA ST Cables are manufactured under the following standards:
UL 1581, NTC-3203 Reference Standard for Electrical Wires, Cables and Flexible
Cords
UL 62, NTC-2356 Flexible Cord and Fixture Wire.
Certifications
CENTELSA ST Flexible cords are certified by UL, File E203934
11
Colors
Conductors identification: 2, black-white; 3, black-white-green; 4, blackwhite-red-green. Black colored Jacket.
Note: Other configurations, sizes, colors and length not specified herein
are available upon request.
12
Flexible Cords Type ST 600V, 60oC (International System Unit)
Extra Hard Service Thermoplastic Insulated
Standard: UL 62, NTC-2356 Flexible Cord and Fixture Wire.
SIZE
AWG
14
12
10
8
6
4
2
COPPER CONDUCTOR
CONDUCTORS
STRANDS STRAND SECTION
No.
DIAMETER
(mm2)
(mm)
2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
DIAMETER
(mm)
INSULATION JACKET
OVERALL
THICKNESS THICKNESS DIAMETER
(mm)
(mm)
(mm)
APPROX.
TOTAL
WEIGHT
(kg/km)
DC
RESISTANCE
AT 20°C 1
(ohm/km)
2.03
2.03
2.03
2.41
2.41
2.41
2.41
2.41
2.41
2.79
2.79
3.18
3.18
3.18
3.56
3.56
3.56
3.94
3.94
3.94
4.32
210
244
290
283
331
394
357
425
512
535
644
818
692
851
1082
1088
1327
1674
1541
1899
2388
8.63
8.63
8.63
5.45
5.45
5.45
3.40
3.40
3.40
2.11
2.11
2.11
1.33
1.33
1.33
0.843
0.843
0.843
0.532
0.532
0.532
41
0.254
2.08
1.98
1.14
65
0.254
3.29
2.52
1.14
104
0.254
5.27
3.21
1.14
168
0.254
8.51
3.66
1.52
266
0.254
13.48
4.12
1.52
420
0.254
21.28
6.72
1.52
665
0.254
33.70
8.58
1.52
12.91
13.58
14.71
14.77
15.53
16.80
16.15
17.02
18.47
19.40
20.45
23.01
21.10
22.23
24.90
27.09
28.62
31.96
31.59
33.41
37.15
AMPACITY 2
(A) 3
AMPACITY 2
(A) 4
18
15
25
20
30
25
40
35
55
45
70
60
95
80
Notes: 1. DC Resistance calculated based on a 17.241 ohm-mm2/km copper resistivity.
2. Ampacities based on 60°C conductor temperature, and Section 400 of NEC (NTC 2050) and 30°C ambient temperature.
3. Two current carrying conductors.
4. Three current carrying conductors.
5. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
13
Flexible Cords Type ST 600V, 60oC
Extra Hard Service Thermoplastic Insulated
Standard: UL 62, NTC-2356 Flexible Cord and Fixture Wire.
SIZE
AWG
14
12
10
8
6
4
2
COPPER CONDUCTOR
CONDUCTORS
STRANDS STRAND SECTION
No.
DIAMETER
(kcmil)
(mils)
2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
DIAMETER
(mils)
INSULATION JACKET
OVERALL
THICKNESS THICKNESS DIAMETER
(mils)
(mils)
(mils)
APPROX.
TOTAL
WEIGHT
(lb/kft)
DC
RESISTANCE
AT 20°C 1
(ohm/kft)
80
80
80
95
95
95
95
95
95
110
110
125
125
125
140
140
140
155
155
155
170
141
164
195
190
222
265
240
286
344
359
433
550
465
572
727
731
892
1125
1036
1277
1605
2.63
2.63
2.63
1.66
1.66
1.66
1.04
1.04
1.04
0.642
0.642
0.642
0.406
0.406
0.406
0.257
0.257
0.257
0.162
0.162
0.162
41
10.0
4.10
78
45
65
10.0
6.50
99
45
104
10.0
10.40
126
45
168
10.0
16.80
144
60
266
10.0
26.60
162
60
420
10.0
42.00
265
60
665
10.0
66.50
338
60
508
535
579
582
611
661
636
670
727
764
805
906
831
875
980
1066
1127
1258
1244
1315
1463
AMPACITY 2
(A) 3
AMPACITY 2
(A) 4
18
15
25
20
30
25
40
35
55
45
70
60
95
80
Notes: 1. DC Resistance calculated based on a 10.371 ohm-cmil/ft copper resistivity.
2. Ampacities based on 60°C conductor temperature, and Section 400 of NEC (NTC 2050) and 30°C ambient temperature.
3. Two current carrying conductors.
4.Three current carrying conductors.
5. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
14
Flexible Cords Type SJT
Junior Hard Service Thermoplastic Insulated
Description
Multi-conductor Cable, two, three or four flexible soft copper conductors polyvinyl
chloride (PVC) insulated, twisted and external PVC jacket
Construction
Conductor
Flexible soft copper conductor, Class K stranded
Insulation
Flame Retardant Polyvinyl chloride (PVC 60° C)
Jacket
Flame Retardant Polyvinyl chloride (PVC 60° C)
Characteristics
Operating Temperature
60° C.
Operating Voltage
300 V.
Applications
Junior Hard Service Cord for industrial, commercial and residential equipment. Open
wiring installation, in portable extensions with terminals.
Specifications
CENTELSA SJT Cables are manufactured under the following standards:
UL 1581, NTC-3203 Reference Standard for Electrical Wires, Cables and Flexible
Cords
UL 62, NTC-2356 Flexible Cord and Fixture Wire.
15
Certifications
CENTELSA SJT Flexible cords are certified by UL, File E203934
Colors
Conductors identification: 2, black-white; 3, black-white-green; 4, blackwhite-red-green. Black colored Jacket.
Note: Other configurations, sizes, colors and length not specified herein
are available upon request.
16
Flexible Cords Type SJT 600V, 60oC (International System Unit)
Junior Hard Service Thermoplastic Insulated
Standard: UL 62, NTC-2356 Flexible Cord and Fixture Wire.
SIZE
AWG
18
16
14
12
10
COPPER CONDUCTOR
CONDUCTORS
STRANDS STRAND SECTION
No.
DIAMETER
(mm2)
(mm)
2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
DIAMETER
(mm)
INSULATION JACKET
OVERALL
THICKNESS THICKNESS DIAMETER
(mm)
(mm)
(mm)
APPROX.
TOTAL
WEIGHT
(kg/km)
DC
RESISTANCE
AT 20°C 1
(ohm/km)
0.76
0.76
0.76
0.76
0.76
0.76
0.76
0.76
0.76
1.14
1.14
1.14
1.52
1.52
1.52
69
82
99
86
104
127
113
139
171
169
208
255
298
363
445
22.1
22.1
22.1
13.6
13.6
13.6
8.63
8.63
8.63
5.45
5.45
5.45
3.40
3.40
3.40
16
0.254
0.81
1.23
0.76
26
0.254
1.32
1.51
0.76
41
0.254
2.08
1.98
0.76
65
0.254
3.29
2.52
0.76
104
0.254
5.27
3.21
1.14
7.26
7.70
8.43
7.82
8.30
9.11
8.76
9.32
10.24
10.62
11.26
12.32
14.35
15.22
16.67
AMPACITY 2
(A) 3
AMPACITY 2
(A) 4
10
7
13
10
18
15
25
20
30
25
AMPACITY 2
(A) 3
AMPACITY 2
(A) 4
10
7
13
10
18
15
25
20
30
25
Notes: 1. DC Resistance calculated based on a 17.241 ohm-mm2/km copper resistivity.
2. Ampacities based on 60°C conductor temperature, and Section 400 of NEC (NTC 2050) and 30°C ambient temperature.
3. Two current carrying conductors.
4. Three current carrying conductors.
5. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
Flexible Cords Type SJT 600V, 60oC
Junior Hard Service Thermoplastic Insulated
Standard: UL 62, NTC-2356 Flexible Cord and Fixture Wire.
SIZE
AWG
18
16
14
12
10
Notes:
COPPER CONDUCTOR
CONDUCTORS
STRANDS STRAND SECTION
No.
DIAMETER
(kcmil)
(mils)
2
3
4
2
3
4
2
3
4
2
3
4
2
3
4
DIAMETER
(mils)
INSULATION JACKET
OVERALL
THICKNESS THICKNESS DIAMETER
(mils)
(mils)
(mils)
16
10.0
1.60
48
30
26
10.0
2.60
59
30
41
10.0
4.10
78
30
65
10.0
6.50
99
30
104
10.0
10.40
126
45
30
30
30
30
30
30
30
30
30
45
45
45
60
60
60
286
303
332
308
327
359
345
367
403
418
443
485
565
599
656
APPROX.
TOTAL
WEIGHT
(lb/kft)
DC
RESISTANCE
AT 20°C 1
(ohm/kft)
46
55
67
58
70
85
76
93
115
114
140
172
200
244
299
6.74
6.74
6.74
4.15
4.15
4.15
2.63
2.63
2.63
1.66
1.66
1.66
1.04
1.04
1.04
1. DC Resistance calculated based on a 10.371 ohm-cmil/ft copper resistivity.
2. Ampacities based on 60°C conductor temperature, and Section 400 of NEC (NTC 2050) and 30°C ambient temperature.
3. Two current carrying conductors.
4. Three current carrying conductors.
5. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
17
Flexible Cords Type SVT
Service Vacuum-cleaner cord, Thermoplastic Insulated
Description
Multi-conductor Cable, two, three or four flexible soft copper conductors
polyvinyl chloride (PVC) insulated, twisted and external PVC jacket
Construction
Conductor
Flexible soft copper conductor, Class M stranded
Insulation
Flame Retardant Polyvinyl chloride (PVC 60° C)
Jacket
Flame Retardant Polyvinyl chloride (PVC 60° C)
Characteristics
Operating Temperature
60° C.
Operating Voltage
300 V.
Applications
Service Cord, vacuum cleaner cord computers and similar equipments.
Open wiring installation, in portable extensions with terminals.
Specifications
CENTELSA SVT Cables are manufactured under the following
standards:
UL 1581, NTC-3203 Reference Standard for Electrical Wires, Cables and
Flexible Cords
UL 62, NTC-2356 Flexible Cord and Fixture Wire.
18
Certifications
CENTELSA SVT Flexible cords are certified by UL, File E203934
Colors
Conductors identification: 2, black-white; 3, black-white-green; 4, black-whitered-green. Black colored Jacket.
Note: Other configurations, sizes, colors and length not specified herein are available
upon request.
19
Flexible Cord Type SVT 300V 60°C (International System Unit)
Service Vacuum-cleaner cord, Thermoplastic Insulated
Standard: UL 62, NTC-ICONTEC 2356. Flexible and Fixture Wire
SIZE
AWG
18
16
COPPER CONDUCTOR
CONDUCTORS
STRANDS STRAND SECTION
No.
DIAMETER
(mm2)
(mm)
2
3
4
2
3
4
41
0.160
0.82
65
0.160
1.31
DIAMETER
(mm)
1.16
6.76
6.00
1.48
6.76
6.00
INSULATION JACKET
OVERALL
THICKNESS THICKNESS DIAMETER
(mm)
(mm)
(mm)
APPROX.
TOTAL
WEIGHT
(kg/km)
DC
RESISTANCE
AT 20°C 1
(ohm/km)
0.76
0.76
0.76
0.76
0.76
0.76
46
56
68
62
76
94
22.1
22.1
22.1
13.6
13.6
13.6
0.38
0.38
5.60
5.91
6.43
6.24
6.60
7.20
AMPACITY 2
(A) 3
AMPACITY 2
(A) 4
10
7
13
10
Notes: 1. Fourth conductor is used as grounding conductor.
2. DC Resistance calculated based on a 17.241 ohm-mm2/km copper resistivity.
3. Ampacities based on 60°C conductor temperature, and Section 400 of NEC (NTC 2050) and 30°C ambient temperature.
4. Two current carrying conductors.
5. Three current carrying conductors.
6. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
Flexible Cord Type SVT 300V 60°C
Service Vacuum-cleaner cord, Thermoplastic Insulated
Standard: UL 62, NTC-ICONTEC 2356. Flexible and Fixture Wire
SIZE
AWG
18
16
COPPER CONDUCTOR
CONDUCTORS
STRANDS STRAND SECTION
No.
DIAMETER
(kcmil)
(mils)
2
3
4
2
3
4
DIAMETER
(mils)
INSULATION JACKET
OVERALL
THICKNESS THICKNESS DIAMETER
(mils)
(mils)
(mils)
APPROX.
TOTAL
WEIGHT
(lb/kft)
DC
RESISTANCE
AT 20°C 1
(ohm/kft)
30
30
30
30
30
30
31
38
46
41
51
63
6.74
6.74
6.74
4.15
4.15
4.15
41
6.3
1.63
46
15
65
6.3
2.58
58
15
220
233
253
246
260
284
AMPACITY 2
(A) 3
AMPACITY 2
(A) 4
10
7
13
10
Notes: 1. Fourth conductor is used as grounding conductor.
2. DC Resistance calculated based on a 10.371 ohm-cmil/ft copper resistivity.
3. Ampacities based on 60°C conductor temperature, and Section 400 of NEC (NTC 2050) and 30°C ambient temperature.
4. Two current carrying conductors.
5. Three current carrying conductors.
6. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
20
Parallel Cord Type SPT-C
Parallel Cord, Thermoplastic Insulated
Description
Two copper flexible copper conductor, paralleled and PVC insulated.
Construction
Flexible soft copper conductor, Class K stranded
Insulation
Flame Retardant Polyvinyl chloride (PVC 60° C)
Integral insulation with separation membrane, and polarization ridges in one
conductor.
Characteristics
Operating Temperature
60° C.
Operating Voltage
300 V. (600V optional)
Applications
Service Cord, for portable electrical devices. Open wiring installation, in portable
extensions with terminals.
Specifications
CENTELSA SPT Cables are manufactured under the following standards:
UL 1581, NTC-3203 Reference Standard for Electrical Wires, Cables and Flexible
Cords
UL 62, NTC-2356 Flexible Cord and Fixture Wire.
CENTELSA Specifications for SPT-C Cables
Certifications
CENTELSA SPT-C Paralleled cords are certified by:
CIDET (Colombia). Cert. No. 02004, according to RETIE (Colombian Technical Code
of Electrical Installations) requirements
21
Colors
White, grey brown and black. Optional with red strip at one conductor
for polarization indication.
Packaging
100 m spools covered with plastic thermo pack, in corrugated carton boxes.
Note: Other configurations, sizes, colors and length not specified herein
are available upon request.
22
Paralleled Cord Type SPT-C 300V, 60°C (International System Unit)
Parallel Cord, Thermoplastic Insulated
Standards: UL 62, NTC 2356 and CENTELSA specifications for SPT-C cables
COPPER CONDUCTOR
SIZE
AWG
2
2
2
2
2
2
X
X
X
X
X
X
STRANDS
22
20
18
16
14
12
7
10
16
26
41
65
STRAND SECTION
DIAMETER
(mm2)
(mm)
0.254
0.254
0.254
0.254
0.254
0.254
DIAMETER
(mm)
0.35
0.51
0.81
1.32
2.08
3.29
0.76
0.97
1.23
1.51
1.98
2.52
INSULATION
THICKNESS
(mm)
0.51
0.51
0.64
0.64
0.64
0.64
EXTERNAL
DIMENSIONS
(mm)
1.86
2.07
2.59
2.87
3.34
3.88
X
X
X
X
X
X
3.72
4.14
5.17
5.73
6.67
7.75
APPROX.
TOTAL
WEIGHT
(kg/km)
DC
RESISTANCE
AT 20°C 1
(ohm/km)
AMPACITY 2
(A)
14
17
28
39
57
84
49.6
34.7
21.7
13.3
8.46
5.34
2
10
13
18
25
Notes: 1. DC Resistance calculated based on a 17.241 ohm-mm2/km copper resistivity.
2. Ampacities based on 60°C conductor temperature, and Section 400 of NEC (NTC 2050) and 30°C ambient temperature.
3. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
Paralleled Cord Type SPT-C 300V, 60°C)
Parallel Cord, Thermoplastic Insulated
Standards: UL 62, NTC 2356 and CENTELSA specifications for SPT-C cables
COPPER CONDUCTOR
SIZE
AWG
2
2
2
2
2
2
X
X
X
X
X
X
STRANDS
22
20
18
16
14
12
7
10
16
26
41
65
STRAND SECTION
DIAMETER
(kcmil)
(mils)
10.0
10.0
10.0
10.0
10.0
10.0
0.70
1.00
1.60
2.60
4.10
6.50
DIAMETER
(mils)
30
38
48
59
78
99
INSULATION
THICKNESS
(mils)
20
20
25
25
25
25
EXTERNAL
DIMENSIONS
(mils)
73
82
102
113
131
153
X
X
X
X
X
X
147
163
204
226
263
305
APPROX.
TOTAL
WEIGHT
(lb/kft)
9
12
19
26
38
56
DC
RESISTANCE
AT 20°C 1
(ohm/kft)
AMPACITY 2
(A)
15.1
10.6
6.61
4.07
2.58
1.63
2
10
13
18
25
Notes: 1. DC Resistance calculated based on a 10.371 ohm-cmil/ft copper resistivity.
2. Ampacities based on 60°C conductor temperature, and Section 400 of NEC (NTC 2050) and 30°C ambient temperature.
3. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
23
Paralleled Cord
Type SPT-1 SPT-2 SPT-3
Parallel Cord, Thermoplastic Insulated
Description
Two copper flexible copper conductor, paralleled and PVC insulated.
Conductor
Flexible soft copper conductor, Class M stranded for SPT-1 and SPT2
Flexible soft copper conductor, Class K stranded for SPT-3
Insulation
Flame Retardant Polyvinyl chloride (PVC 60° C)
Integral insulation with separation membrane, and polarization ridges
in one conductor.
Characteristics
Operating Temperature
60° C.
Operating Voltage
300 V.
Applications
SPT-1: Portable lamps feeders, fans, radios, clocks, household
appliances and office equipment.
SPT-2: Same as above, stereo and video devices
SPT-3: Freezers, coolers, air conditioning equipment, dish washing
machines, waste disposers and office equipment.
Specifications
CENTELSA SPT-1, SPT-2 and SPT-3 Paralleled Cords are manufactured
under the following standards:
UL 1581, NTC-3203 Reference Standard for Electrical Wires, Cables and
Flexible Cords
24
UL 62, NTC-2356 Flexible Cord and Fixture Wire.
Colors
White, grey, brown and black.
Packaging
100 m spools covered with plastic thermo pack, in corrugated carton boxes.
Note: Other configurations, sizes, colors and length not specified herein are available
upon request.
25
Paralleled Cords Type SPT-1 SPT-2 SPT-3 300V, 60°C
(International System Unit)
Parallel Cord, Thermoplastic Insulated
Standard: UL 62, NTC 2356. Flexible and Fixture Wire
COPPER CONDUCTOR
TYPE
SPT-1
SPT-2
SPT-3
SIZE
AWG
2
2
2
2
2
2
2
2
2
X
X
X
X
X
X
X
X
X
STRANDS
20
18
18
16
18
16
14
12
10
26
41
41
65
16
26
41
65
104
STRAND SECTION
DIAMETER
(mm2)
(mm)
0.160
0.160
0.160
0.160
0.254
0.254
0.254
0.254
0.254
0.52
0.82
0.82
1.31
0.81
1.32
2.08
3.29
5.27
DIAMETER
(mm)
0.92
1.16
1.16
1.48
1.23
1.51
1.98
2.52
3.21
INSULATION
THICKNESS
(mm)
0.76
0.76
1.14
1.14
1.52
1.52
2.03
2.41
2.79
EXTERNAL
DIMENSIONS
(mm)
2.52
2.76
3.53
3.85
4.39
4.67
6.16
7.48
8.96
X 4.63
X 5.11
X 6.78
X 7.42
X 8.49
X 9.05
X 11.01
X 12.87
X 15.04
APPROX.
TOTAL
WEIGHT
(kg/km)
DC
RESISTANCE
AT 20°C 1
(ohm/km)
AMPACITY 2
(A)
17
24
36
50
51
68
115
177
268
33.6
21.3
21.3
13.5
21.7
13.3
8.46
5.34
3.34
2
10
10
13
10
13
18
25
30
Notes: 1. DC Resistance calculated based on a 17.241 ohm-mm2/km copper resistivity.
2. Ampacities based on 60°C conductor temperature, and Section 400 of NEC (NTC 2050) and 30°C ambient temperature.
3. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
Paralleled Cords Type SPT-1 SPT-2 SPT-3 300V, 60°C
Parallel Cord, Thermoplastic Insulated
Standard: UL 62, NTC 2356. Flexible and Fixture Wire
COPPER CONDUCTOR
TYPE
SPT-1
SPT-2
SPT-3
SIZE
AWG
2
2
2
2
2
2
2
2
2
X
X
X
X
X
X
X
X
X
STRANDS
20
18
18
16
18
16
14
12
10
26
41
41
65
16
26
41
65
104
STRAND SECTION
DIAMETER
(kcmil)
(mils)
6.3
6.3
6.3
6.3
10.0
10.0
10.0
10.0
10.0
1.03
1.63
1.63
2.58
1.60
2.60
4.10
6.50
10.40
DIAMETER
(mils)
36
46
46
58
48
59
78
99
126
INSULATION
THICKNESS
(mils)
30
30
45
45
60
60
80
95
110
EXTERNAL
DIMENSIONS
(mils)
99
109
139
152
173
184
243
295
353
X
X
X
X
X
X
X
X
X
182
201
267
292
334
356
434
507
592
APPROX.
TOTAL
WEIGHT
(lb/kft)
12
16
24
33
35
46
77
119
180
DC
RESISTANCE
AT 20°C 1
(ohm/kft)
10.3
6.50
6.50
4.10
6.61
4.07
2.58
1.63
1.02
Notes: 1. DC Resistance calculated based on a 10.371 ohm-cmil/ft copper resistivity.
2. Ampacities based on 60°C conductor temperature, and Section 400 of NEC (NTC 2050) and 30°C ambient temperature.
3. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
26
AMPACITY 2
(A)
2
10
10
13
10
13
18
25
30
Cables Type TFF and TWK
Thermoplastic Insulation, Flexible Fixture Wire
Thermoplastic Insulation, Suitable for Wet Locations, Class K Stranding
Description
Soft copper flexible conductor PVC insulated.
Construction
Conductor
Flexible soft copper conductor, Class K stranded
Insulation
Flame Retardant Polyvinyl chloride (PVC 60° C)
Characteristics
Operation Temperature
60° C.
Operating Voltage
600 V.
Applications
Internal equipment wiring, boards, in ducts or raceways.
Also used in low voltage automotive wiring.
Specifications
CENTELSA TFF and TWK Cables are manufactured under the following
standards:
UL 1581, NTC-3203 Reference Standard for Electrical Wires, Cables and Flexible
Cords
UL 62, NTC-2356 Flexible Cord and Fixture Wire, for TFF
UL 83, NTC-1332 Thermoplastic insulated Wires and Cables, for TWK
Colors
Black, white, red, green, yellow, blue.
27
Packaging
100 m spools covered with plastic thermo pack, in corrugated carton boxes.
Note: Other configurations, sizes, colors and length not specified herein
are available upon request.
28
Cables Type TFF and TWK 600V, 60°C (International System Units)
Thermoplastic Insulation, Flexible Fixture Wire
Thermoplastic Insulation, Suitable for Wet Locations, Class K Stranding
Standard:
TYPE
TFF
TWK
UL 62, NTC 2356. Flexible and Fixture Wire, for TFF
UL 83, NTC-1332 Thermoplastic insulated Wires and Cables, for TWK
SIZE
AWG
18
16
14
12
10
8
6
STRANDS
16
26
41
65
104
168
266
STRAND SECTION CONDUCTOR
DIAMETER
(mm2)
DIAMETER
(mm)
(mm)
0.254
0.254
0.254
0.254
0.254
0.254
0.254
0.81
1.32
2.08
3.29
5.27
8.51
13.48
1.23
1.51
1.98
2.52
3.21
3.66
4.12
INSULATION
THICKNESS
(mm)
DIAMETER
OVER
INSULATION
(mm)
APPROX.
TOTAL
WEIGHT
(kg/km)
DC
RESISTANCE
AT 20°C 1
(ohm/km)
AMPACITY 2
(A)
0.76
0.76
0.76
0.76
0.76
1.14
1.52
2.83
3.11
3.58
4.12
4.81
6.04
7.28
15
20
29
42
63
104
164
21.7
13.3
8.46
5.34
3.34
2.07
1.30
10
13
18
25
30
40
55
Notes: 1. DC Resistance calculated based on a 17.241 ohm-mm2/km copper resistivity.
2. Ampacities based on 60°C conductor temperature, and Section 400 of NEC (NTC 2050) and 30°C ambient temperature.
3. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
Cables Type TFF and TWK 600V, 60°C
Thermoplastic Insulation, Flexible Fixture Wire
Thermoplastic Insulation, Suitable for Wet Locations, Class K Stranding
Standard:
TYPE
TFF
TWK
UL 62, NTC 2356. Flexible and Fixture Wire, for TFF
UL 83, NTC-1332 Thermoplastic insulated Wires and Cables, for TWK
SIZE
AWG
18
16
14
12
10
8
6
STRANDS
16
26
41
65
104
168
266
STRAND SECTION CONDUCTOR
DIAMETER
(kcmil) DIAMETER
(mils)
(mils)
10.0
10.0
10.0
10.0
10.0
10.0
10.0
1.60
2.60
4.10
6.50
10.40
16.80
26.60
48
59
78
99
126
144
162
INSULATION
THICKNESS
(mils)
DIAMETER
OVER
INSULATION
(mils)
APPROX.
TOTAL
WEIGHT
(lb/kft)
DC
RESISTANCE
AT 20°C 1
(ohm/kft)
AMPACITY 2
(A)
30
30
30
30
30
45
60
111
122
141
162
189
238
287
10
14
20
28
42
70
110
6.61
4.07
2.58
1.63
1.02
0.630
0.398
10
13
18
25
30
40
55
Notes: 1. Resistance calculated based on a 10.371 ohm-cmil/ft copper resistivity.
2. Ampacities based on 60°C conductor temperature, and Section 400 of NEC (NTC 2050) and 30°C ambient temperature.
3. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
29
Cables Type TFFN
Thermoplastic Insulation, Flexible Fixture Wire, Nylon Jacket
Description
Soft copper conductor, PVC insulated and with a Nylon covering
Construction
Conductor
Flexible soft copper conductor, Class K stranded
Insulation
Polyvinyl Chloride (PVC 90° C), flame retardant
Jacket
Abrasion resistant Nylon
Characteristics
Operating Temperature
90°C.
Operating Voltage
600 V.
Applications
TFFN cables and wires are used generally in internal equipment and board
wiring. Installation: in ducts tubing and boards.
Special for locations with abrasive environment, oil, grease, gasoline and
other chemical agents contaminated ambient. Its reduced diameter permits
an optimum utilization of ducts or sites where is installed.
Standards
CENTELSA TFFN wires and cables are manufactured under the following
standards:
UL 1581, NTC-3203 Reference Standard for Electrical Wires, Cables and
Flexible Cords
UL 62, NTC-2356 Flexible Cord and Fixture Wire
30
Colors
Black, white, red, yellow, blue.
Packaging
100 m spools covered with plastic thermo pack, in corrugated carton boxes.
Note: Other configurations, sizes, colors and length not specified herein are available
upon request.
31
Cable Type TFFN 600V (International System Units)
Thermoplastic Insulation, Fixture Wire, Nylon Jacket (90° C)
Standard: UL 62, NTC-2356. Flexible Cord and Fixture Wire.
SIZE
AWG
STRANDS
18
16
16
26
STRAND SECTION CONDUCTOR
DIAMETER (mm2)
DIAMETER
(mm)
(mm)
0.254
0.254
0.81
1.32
1.23
1.51
INSULATION
THICKNESS
(mm)
0.38
0.38
DIAMETER
JACKET
OVER
THICKNESS
INSULATION
(mm)
(mm)
2.06
2.36
0.10
0.10
DIAMETER
OVER
JACKET
(mm)
APPROX.
TOTAL
WEIGHT
(kg/km)
DC
RESISTANCE
AT 20°C 1
(ohm/km)
AMPACITY 2
(A)
2.29
2.59
11
17
21.4
13.4
6
8
Notes: 1. DC Resistance calculated based on a 17.241 ohm-mm2/km copper resistivity.
2. Ampacities based on 60°C conductor temperature, and Section 400 of NEC (NTC 2050) and 30°C ambient temperature.
3. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
Cable Type TFFN 600V, 90°C
Thermoplastic Insulation, Fixture Wire, Nylon Jacket
Standard: UL 62, NTC-2356. Flexible Cord and Fixture Wire.
SIZE
AWG
STRANDS
18
16
16
26
STRAND SECTION CONDUCTOR INSULATION
DIAMETER (kcmil)
DIAMETER THICKNESS
(mils)
(mils)
(mils)
10.0
10.0
1.60
2.60
48
59
15
15
DIAMETER
JACKET
DIAMETER
OVER
THICKNESS
OVER
INSULATION
(mils)
JACKET
(mils)
(mm)
81
93
4
4
90
102
APPROX.
TOTAL
WEIGHT
(lb/kft)
DC
RESISTANCE
AT 20°C 1
(ohm/kft)
AMPACITY 2
(A)
8
11
6.51
4.10
6
8
Notes: 1. DC Resistance calculated based on a 10.371 ohm-cmil/ft copper resistivity.
2. Ampacities based on 60°C conductor temperature, and Section 400 of NEC (NTC 2050) and 30°C ambient temperature.
3. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
32
Lighting Cables
Description
Soft copper flexible conductor PVC insulated.
Construction
Conductor
Flexible soft copper conductor, Class K stranded
Insulation
Flame Retardant Polyvinyl chloride (PVC 105° C)
Characteristics
Operating Temperature
105° C.
Operating Voltage
600 V.
Applications
Lighting connections and high temperature applications.
Specifications
CENTELSA LIGHTING Cables are manufactured under the following standards:
UL 1581, NTC-3203 Reference Standard for Electrical Wires, Cables and Flexible
Cords
UL 83, NTC-1332 Thermoplastic insulated Wires and Cables
UL 62, NTC-2356 Flexible Cord and Fixture Wire (Sizes 20 to 16 AWG)
CENTELSA Specifications for LIGHTING Cables
Colors
Black, white, red, yellow, blue.
33
Packaging
100 m spools covered with plastic thermo pack, in corrugated carton boxes.
Note: Other configurations, sizes, colors and length not specified herein are
available upon request.
34
Lighting Cables 105°C (International System Units)
Standard:
SIZE
AWG
UL 62, NTC 2356. Flexible and Fixture Wire
UL 83, NTC-1332 Thermoplastic insulated Wires and Cables
CENTELSA Specifications for LIGHTING Cables
STRANDS
20
18
16
14
12
10
8
6
STRAND SECTION CONDUCTOR
DIAMETER
DIAMETER
(mm2)
(mm)
(mm)
0.254
0.254
0.254
0.254
0.254
0.254
0.254
0.254
10
16
26
41
65
104
168
266
0.51
0.81
1.32
2.08
3.29
5.27
8.51
13.48
0.97
1.23
1.51
1.98
2.52
3.21
3.66
4.12
INSULATION
THICKNESS
(mm)
DIAMETER
OVER
INSULATION
(mm)
APPROX.
TOTAL
WEIGHT
(kg/km)
DC
RESISTANCE
AT 20°C 1
(ohm/km)
0.76
0.76
0.76
0.76
0.76
0.76
1.14
1.52
2.23
2.49
2.77
3.24
3.78
4.47
5.52
6.58
9
13
18
26
39
59
96
152
34.7
21.7
13.3
8.46
5.34
3.34
2.07
1.30
Notes: 1. DC Resistance calculated based on a 17.241 ohm-mm2/km copper resistivity.
2. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
Lighting Cables 105°C
Standard:
SIZE
AWG
20
18
16
14
12
10
8
6
UL 62, NTC 2356. Flexible and Fixture Wire
UL 83, NTC-1332 Thermoplastic insulated Wires and Cables
CENTELSA Specifications for LIGHTING Cables
STRANDS
10
16
26
41
65
104
168
266
STRAND SECTION CONDUCTOR
DIAMETER
DIAMETER
(kcmil)
(mils)
(mils)
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
1.00
1.60
2.60
4.10
6.50
10.40
16.80
26.60
38
48
59
78
99
126
144
162
INSULATION
THICKNESS
(mils)
DIAMETER
OVER
INSULATION
(mils)
APPROX.
TOTAL
WEIGHT
(lb/kft)
DC
RESISTANCE
AT 20°C 1
(ohm/kft)
30
30
30
30
30
30
45
60
88
98
109
128
149
176
217
259
6
8
12
18
26
40
65
102
10.6
6.6
4.1
2.58
1.63
1.02
0.63
0.40
Notes: 1. DC Resistance calculated based on a 10.371 ohm-cmil/ft copper resistivity.
2. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
35
Cables Type XGW
Cross (X) Linked Polyethylene Insulated 125°C, General Purpose Wire
Description
Soft copper flexible conductor XLPE insulated.
Construction
Conductor
Flexible soft copper conductor, Class K stranded
Insulation
Flame retardant Black Cross Linked Polyethylene (XLPE 125°C)
Characteristics
Operating Temperature
125° C.
Applications
Used generally in internal equipment and board wiring. Installation in ducts
or raceways. High temperature applications. Also used in automotive low
voltage wiring. Insulation resistant to abrasion, gasoline, oil, solvents and
chemical agents.
Specifications
CENTELSA XGW Cables are manufactured under the following
standards:
UL 1581, NTC-3203 Reference Standard for Electrical Wires, Cables and
Flexible Cords
CENTELSA Specifications for XGW Cables
36
Packaging
100 m spools covered with plastic thermo pack, in corrugated carton boxes.
Note: Other configurations, sizes, colors and length not specified herein are available
upon request.
37
Cables Type XGW 600V, 125°C (International System Units)
Cross (X) Linked Polyethylene Insulated 125°C, General Purpose Wire
Standard: CENTELSA Specifications for XGW Cables
SIZE
AWG
20
18
16
14
12
10
8
STRANDS
10
16
26
41
65
104
168
STRAND SECTION CONDUCTOR
DIAMETER
DIAMETER
(mm2)
(mm)
(mm)
0.254
0.254
0.254
0.254
0.254
0.254
0.254
0.51
0.81
1.32
2.08
3.29
5.27
8.51
0.97
1.23
1.51
1.98
2.52
3.21
3.66
INSULATION
THICKNESS
(mm)
DIAMETER
OVER
INSULATION
(mm)
APPROX.
TOTAL
WEIGHT
(kg/km)
DC
RESISTANCE
AT 20°C 1
(ohm/km)
0.74
0.76
0.81
0.89
0.94
1.04
1.09
2.19
2.49
2.85
3.44
4.06
4.91
5.42
9
13
18
28
41
64
95
34.7
21.7
13.3
8.46
5.34
3.34
2.07
Notes: 1. DC Resistance calculated based on a 17.241 ohm-mm2/km copper resistivity.
2. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
Cables Type XGW 600V, 125°C
Cross (X) Linked Polyethylene Insulated 125°C, General Purpose Wire
Standard: CENTELSA Specifications for XGW Cables
SIZE
AWG
20
18
16
14
12
10
8
STRANDS
10
16
26
41
65
104
168
STRAND SECTION CONDUCTOR
DIAMETER
DIAMETER
(kcmil)
(mils)
(mils)
10.0
10.0
10.0
10.0
10.0
10.0
10.0
1.00
1.60
2.60
4.10
6.50
10.40
16.80
38
48
59
78
99
126
144
INSULATION
THICKNESS
(mils)
DIAMETER
OVER
INSULATION
(mils)
APPROX.
TOTAL
WEIGHT
(lb/kft)
DC
RESISTANCE
AT 20°C 1
(ohm/kft)
29
30
32
35
37
41
43
84
95
110
133
157
191
211
6
8
12
19
28
43
64
10.6
6.61
4.07
2.58
1.63
1.02
0.630
Notes: 1. DC Resistance calculated based on a 10.371 ohm-cmil/ft copper resistivity.
2. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
38
Cables Type HTS-C
Heavy Duty Thermoset Elastomer (Synthetic Rubber) Insulated 150°C, C: Common use
Description
Soft tinned copper flexible conductor Thermoset Elastomer insulated.
Construction
Conductor
Flexible tinned soft copper conductor, Class K stranded
Insulation
Black Thermoset Elastomer Flame retardant (XLPE 150°C)
Characteristics
Operating Temperature
150° C.
Applications
Used generally in internal equipment and board wiring. Installation in ducts
or raceways, transit zones, high temperature applications. Also used in
automotive low voltage wiring.
Flexible insulation, low smoke emissions, non halogenated, lead free and
excellent thermal stability.
Specifications
CENTELSA HTS-C Cables are manufactured under the following
standards:
UL 1581, NTC-3203 Reference Standard for Electrical Wires, Cables and
Flexible Cords
CENTELSA Specifications for HTS-C Cables
39
Packaging
100 m spools covered with plastic thermo pack, in corrugated carton boxes.
Note: Other configurations, sizes, colors and length not specified herein are
available upon request.
40
Cables Type HTS-C 600V, 150°C (International System Unit)
Heavy Duty Thermoset Elastomer (Synthetic Rubber) Insulated 150°C, C: Common use
Standard: CENTELSA Specifications for HTS-C Cables
SIZE
AWG
18
16
14
12
10
8
6
4
2
1
1/0
2/0
3/0
4/0
STRANDS
16
26
41
65
104
168
266
420
665
836
1064
1323
1666
2107
STRAND SECTION CONDUCTOR
DIAMETER
DIAMETER
(mm2)
(mm)
(mm)
0.254
0.254
0.254
0.254
0.254
0.254
0.254
0.254
0.254
0.254
0.254
0.254
0.254
0.254
0.81
1.32
2.08
3.29
5.27
8.51
13.48
21.28
33.70
42.36
53.91
67.04
84.42
106.76
1.23
1.51
1.98
2.52
3.21
3.66
4.12
6.72
8.58
9.77
11.10
12.47
14.10
15.97
INSULATION
THICKNESS
(mm)
DIAMETER
OVER
INSULATION
(mm)
APPROX.
TOTAL
WEIGHT
(kg/km)
DC
RESISTANCE
AT 20°C 1
(ohm/km)
0.73
0.79
0.82
0.90
0.90
1.10
1.19
1.27
1.29
1.29
1.29
1.29
1.54
1.54
2.77
3.17
3.70
4.42
5.11
5.94
6.60
9.36
11.26
12.45
13.78
15.15
17.30
19.17
14
20
29
44
65
101
151
239
365
451
564
691
878
1094
22.6
13.9
8.8
5.6
3.5
2.1
1.4
0.9
0.5
0.4
0.3
0.3
0.2
0.2
Notes: 1. DC Resistance calculated based on a 17.241 ohm-mm2/km copper resistivity.
2. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
Cables Type HTS-C 600V, 150°C
Heavy Duty Thermoset Elastomer (Synthetic Rubber) Insulated 150°C, C: Common use
Standard: CENTELSA Specifications for HTS-C Cables
SIZE
AWG
18
16
14
12
10
8
6
4
2
1
1/0
2/0
3/0
4/0
STRANDS
16
26
41
65
104
168
266
420
665
836
1064
1323
1666
2107
STRAND SECTION CONDUCTOR
DIAMETER
DIAMETER
(kcmil)
(mils)
(mils)
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
1.60
2.60
4.10
6.50
10.40
16.80
26.60
42.00
66.50
83.60
106.40
132.30
166.60
210.70
48
59
78
99
126
144
162
265
338
385
437
491
555
629
INSULATION
THICKNESS
(mils)
DIAMETER
OVER
INSULATION
(mils)
29
31
32
36
36
43
47
50
51
51
51
51
61
61
109
125
146
174
201
234
260
369
443
490
543
596
681
755
APPROX.
TOTAL
WEIGHT
(lb/kft)
9
14
20
30
44
68
102
161
245
303
379
464
590
735
DC
RESISTANCE
AT 20°C 1
(ohm/kft)
6.9
4.23
2.68
1.69
1.06
0.65
0.41
0.26
0.16
0.13
0.10
0.08
0.06
0.05
Notes: 1. DC Resistance calculated based on a 10.371 ohm-cmil/ft copper resistivity.
2. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
41
Automotive Cables
Type GPT
General Purpose Thermoplastic Insulated
Description
Soft copper flexible conductor PVC insulated.
Construction
Conductor
Flexible soft copper conductor, Class K stranded
Insulation
Flame Retardant Polyvinyl chloride (PVC 75° C)
Characteristics
Operating Temperature
75° C.
Operating Voltage
50 V.
Applications
Low voltage automotive wiring. Insulation resistant to abrasion gasoline
and oil.
Specifications
CENTELSA GPT Cables are manufactured under the following
standards:
UL 1581, NTC-3203 Reference Standard for Electrical Wires, Cables and
Flexible Cords
SAE J1128 NTC-1116 Primary Low Voltage Cables
Colors
Black, white, red, yellow, blue, brown, orange grey and violet.
42
Packaging
100 m spools covered with plastic thermo pack, in corrugated carton boxes.
Note: Other configurations, sizes, colors and length not specified herein are available
upon request.
43
Automotive Cables Type GPT 50V, 75°C
(International System Units)
General Purpose Thermoplastic Insulated
Standard: SAE J1128 NTC-1116, Primary Low Voltage Cables
SIZE
AWG
22
20
18
16
14
12
10
8
STRANDS
7
10
16
26
41
65
104
168
STRAND SECTION CONDUCTOR
DIAMETER
DIAMETER
(mm2)
(mm)
(mm)
0.254
0.254
0.254
0.254
0.254
0.254
0.254
0.254
0.35
0.51
0.81
1.32
2.08
3.29
5.27
8.51
0.76
0.97
1.23
1.51
1.98
2.52
3.21
3.66
INSULATION
THICKNESS
(mm)
0.58
0.58
0.58
0.58
0.58
0.66
0.79
0.94
DIAMETER
OVER
INSULATION
(mm)
1.76
1.97
2.23
2.51
2.98
3.62
4.51
5.20
APPROX.
TOTAL
WEIGHT
(kg/km)
6
8
11
16
24
38
59
93
DC
RESISTANCE
AT 20°C 1
(ohm/km)
49.6
34.7
21.7
13.3
8.46
5.34
3.34
2.07
Notes: 1. DC Resistance calculated based on a 17.241 ohm-mm2/km copper resistivity.
2. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
Automotive Cables Type GPT 50V, 75°C
General Purpose Thermoplastic Insulated
Standard: SAE J1128 NTC-1116, Primary Low Voltage Cables
SIZE
AWG
STRANDS
22
20
18
16
14
12
10
8
7
10
16
26
41
65
104
168
STRAND SECTION CONDUCTOR
DIAMETER
DIAMETER
(kcmil)
(mils)
(mils)
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
0.70
1.00
1.60
2.60
4.10
6.50
10.40
16.80
30
38
48
59
78
99
126
144
INSULATION
THICKNESS
(mils)
23
23
23
23
23
26
31
37
DIAMETER
OVER
INSULATION
(mils)
69
78
88
99
117
143
178
205
Notes: 1. DC Resistance calculated based on a 10.371 ohm-cmil/ft copper resistivity.
2. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
44
APPROX.
TOTAL
WEIGHT
(lb/kft)
4
5
8
11
16
25
40
62
DC
RESISTANCE
AT 20°C 1
(ohm/kft)
15.1
10.6
6.61
4.07
2.58
1.63
1.02
0.630
Automotive Cables
Type TWP
Thin Wall, Thermo Plastic Insulated
Description
Soft copper flexible conductor PVC insulated.
Construction
Conductor
Flexible soft copper conductor, Class K stranded
Insulation
Flame Retardant Polyvinyl chloride (PVC 75° C)
Characteristics
Operating Temperature
75° C.
Operating Voltage
50 V.
Applications
Low voltage automotive wiring where the reduced diameter offers an optimum
utilization of site in which is installed. Insulation resistant to abrasion gasoline
and oil.
Specifications
CENTELSA TWP Cables are manufactured under the following standards:
UL 1581, NTC-3203 Reference Standard for Electrical Wires, Cables and Flexible
Cords
SAE J1128 NTC-1116 Primary Low Voltage Cables
Colors
Black, white, red, yellow, blue, brown, orange grey and violet.
45
Packaging
100 m spools covered with plastic thermo pack, in corrugated carton boxes.
Note: Other configurations, sizes, colors and length not specified herein are
available upon request.
46
Automotive Cable Type TWP 50V, 75°C
(Internacional System Units)
Thin Wall, ThermoPlastic Insulated
Standard: SAE J1128 NTC-1116, Primary Low Voltage Cables
SIZE
AWG
22
20
18
16
14
12
10
8
STRANDS
7
10
16
26
41
65
104
168
STRAND SECTION CONDUCTOR
DIAMETER
DIAMETER
(mm2)
(mm)
(mm)
0.254
0.254
0.254
0.254
0.254
0.254
0.254
0.254
0.35
0.51
0.81
1.32
2.08
3.29
5.27
8.51
0.76
0.97
1.23
1.51
1.98
2.52
3.21
3.66
INSULATION
THICKNESS
(mm)
DIAMETER
OVER
INSULATION
(mm)
APPROX.
TOTAL
WEIGHT
(kg/km)
DC
RESISTANCE
AT 20°C 1
(ohm/km)
0.40
0.40
0.40
0.40
0.40
0.45
0.50
0.55
1.44
1.65
1.91
2.19
2.66
3.32
4.07
4.58
5
7
10
15
22
35
55
86
49.6
34.7
21.7
13.3
8.46
5.34
3.34
2.07
Notes: 1. DC Resistance calculated based on a 17.241 ohm-mm2/km copper resistivity.
2. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
Automotive Cable Type TWP 50V, 75°C
Thin Wall, ThermoPlastic Insulated
Standard: SAE J1128 NTC-1116, Primary Low Voltage Cables
SIZE
AWG
STRANDS
22
20
18
16
14
12
10
8
7
10
16
26
41
65
104
168
STRAND SECTION CONDUCTOR
DIAMETER
DIAMETER
(kcmil)
(mils)
(mils)
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
0.70
1.00
1.60
2.60
4.10
6.50
10.40
16.80
30
38
48
59
78
99
126
144
INSULATION
THICKNESS
(mils)
DIAMETER
OVER
INSULATION
(mils)
APPROX.
TOTAL
WEIGHT
(lb/kft)
DC
RESISTANCE
AT 20°C 1
(ohm/kft)
16
16
16
16
16
18
20
22
55
63
73
84
103
127
157
178
3
4
7
10
15
24
37
58
15.1
10.6
6.61
4.07
2.58
1.63
1.02
0.630
Notes: 1. DC Resistance calculated based on a 10.371 ohm-cmil/ft copper resistivity.
2. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
47
Automotive Cables Type SGT.
Battery Cable
Starter or Ground, General Purpose Thermoplastic Insulated
Description
Soft copper flexible conductor PVC insulated.
Construction
Conductor
Flexible soft copper conductor, Class K stranded
Insulation
Flame Retardant Polyvinyl chloride (PVC 75° C)
Characteristics
Operating Temperature
75° C.
Operating Voltage
50 V.
Applications
SGT cables are used to connect the system of engine Start-up. Insulation
is resistant to abrasion, gasoline, oil, solvents and chemical agents.
Specifications
CENTELSA SGT Cables are manufactured under the following standards:
UL 1581, NTC-3203 Reference Standard for Electrical Wires, Cables and
Flexible Cords
SAE J1127 NTC-1955 Battery Cables
48
Packaging
Wood reels or spools upon request.
Note: Other configurations, sizes, colors and length not specified herein are
available upon request.
Automotive Cables Type SGT 50V, 75°C (International System Unit)
Starter or Ground, General Purpose Thermoplastic Insulated
Standard: SAE J1127 NTC-1955. Battery Cables
SIZE
AWG
6
4
2
1
1/0
2/0
3/0
4/0
STRANDS
266
420
665
836
1064
1323
1666
2107
STRAND SECTION CONDUCTOR
DIAMETER
DIAMETER
(mm2)
(mm)
(mm)
0.254
0.254
0.254
0.254
0.254
0.254
0.254
0.254
13.48
21.28
33.70
42.36
53.91
67.04
84.42
106.76
4.12
6.72
8.58
9.77
11.10
12.47
14.10
15.97
INSULATION
THICKNESS
(mm)
DIAMETER
OVER
INSULATION
(mm)
APPROX.
TOTAL
WEIGHT
(kg/km)
DC
RESISTANCE
AT 20°C 1
(ohm/km)
1.52
1.65
1.65
1.65
1.65
1.65
1.98
1.98
6.58
9.40
11.26
12.45
13.78
15.15
17.30
19.17
152
243
368
454
568
697
886
1105
1.30
0.826
0.522
0.415
0.326
0.262
0.208
0.165
Notes: 1. DC Resistance calculated based on a 17.241 ohm-mm2/km copper resistivity.
2. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
Automotive Cables Type SGT 50V, 75°C
Starter or Ground, General Purpose Thermoplastic Insulated
Standard: SAE J1127 NTC-1955. Battery Cables
SIZE
AWG
STRANDS
6
4
2
1
1/0
2/0
3/0
4/0
266
420
665
836
1064
1323
1666
2107
STRAND SECTION CONDUCTOR
DIAMETER
DIAMETER
(kcmil)
(mils)
(mils)
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
26.60
42.00
66.50
83.60
106.40
132.30
166.60
210.70
162
265
338
385
437
491
555
629
INSULATION
THICKNESS
(mils)
DIAMETER
OVER
INSULATION
(mils)
APPROX.
TOTAL
WEIGHT
(lb/kft)
DC
RESISTANCE
AT 20°C 1
(ohm/kft)
60
65
65
65
65
65
78
78
259
370
443
490
543
596
681
755
102
163
247
305
382
469
595
742
0.398
0.252
0.159
0.127
0.0994
0.0800
0.0635
0.0502
Notes: 1. DC Resistance calculated based on a 10.371 ohm-cmil/ft copper resistivity.
2. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
49
Automotive Cables
Type SXL
Special Purpose, Cross (X) Linked Polyethylene Insulated
Description
Soft copper flexible conductor XLPE insulated.
Construction
Conductor
Flexible soft copper conductor, Class K stranded
Insulation
Flame retardant Cross Linked Polyethylene (XLPE 125°C)
Characteristics
Operating Temperature
125° C.
Operating Voltage
50 V.
Applications
Low voltage automotive, special for vane motor. Applications where
heavy duty requires more than GPT cables. Insulation resistant to
abrasion gasoline and oil.
Specifications
CENTELSA SXL Cables are manufactured under the following standards:
UL 1581, NTC-3203 Reference Standard for Electrical Wires, Cables and
Flexible Cords
SAE J1128 NTC-1116 Primary Low Voltage Cables
Colors
Black, red, orange
50
Packaging
100 m spools covered with plastic thermo pack, in corrugated carton boxes.
Note: Other configurations, sizes, colors and length not specified herein are
available upon request.
51
Automotive Cables Type SXL 50V, 75°C
(International System Unit)
Special Purpose, Cross (X) Linked Polyethylene Insulated
Standard: SAE J1128 NTC-1116, Primary Low Voltage Cables
SIZE
AWG
20
18
16
14
12
10
8
STRANDS
10
16
26
41
65
104
168
STRAND SECTION CONDUCTOR
DIAMETER
DIAMETER
(mm2)
(mm)
(mm)
0.254
0.254
0.254
0.254
0.254
0.254
0.254
0.51
0.81
1.32
2.08
3.29
5.27
8.51
0.97
1.23
1.51
1.98
2.52
3.21
3.66
INSULATION
THICKNESS
(mm)
DIAMETER
OVER
INSULATION
(mm)
APPROX.
TOTAL
WEIGHT
(kg/km)
DC
RESISTANCE
AT 20°C 1
(ohm/km)
0.74
0.76
0.81
0.89
0.94
1.04
1.09
2.19
2.49
2.85
3.44
4.06
4.91
5.42
9
13
18
28
41
64
95
34.7
21.7
13.3
8.46
5.34
3.34
2.07
Notes: 1. DC Resistance calculated based on a 17.241 ohm-mm2/km copper resistivity.
2. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
Automotive Cables Type SXL 50V, 75°C
Special Purpose, Cross (X) Linked Polyethylene Insulated
Standard: SAE J1128 NTC-1116, Primary Low Voltage Cables
SIZE
AWG
STRANDS
20
18
16
14
12
10
8
10
16
26
41
65
104
168
STRAND SECTION CONDUCTOR
DIAMETER
DIAMETER
(kcmil)
(mils)
(mils)
10.0
10.0
10.0
10.0
10.0
10.0
10.0
1.00
1.60
2.60
4.10
6.50
10.40
16.80
38
48
59
78
99
126
144
INSULATION
THICKNESS
(mils)
29
30
32
35
37
41
43
DIAMETER
OVER
INSULATION
(mils)
84
95
110
133
157
191
211
Notes: 1. DC Resistance calculated based on a 10.371 ohm-cmil/ft copper resistivity.
2. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
52
APPROX.
TOTAL
WEIGHT
(lb/kft)
6
8
12
19
28
43
64
DC
RESISTANCE
AT 20°C 1
(ohm/kft)
10.6
6.61
4.07
2.58
1.63
1.02
0.630
Silicon Cables Type SF
Silicon Insulated Flexible
Description
Soft copper flexible conductor Silicon Rubber insulated.
Construction
Conductor
Flexible soft copper conductor, Class K stranded
Insulation
Silicon Rubber natural color (Beige)
Characteristics
Operation Temperature
200° C.
Operating Voltage
600 V.
Applications
High temperature applications like motors wiring, internal wiring of luminaries,
ballast, dryers, ovens, freezers, coolers
Excellent insulation performance at high temperatures
Specifications
CENTELSA SF Cables are manufactured under the following standards:
UL 1581, NTC-3203 Reference Standard for Electrical Wires, Cables and Flexible
Cords
UL 62, NTC-2356 Flexible Cord and Fixture Wire
53
Packaging
100 m spools covered with plastic thermo pack, in corrugated carton boxes.
Note: Other configurations, sizes, colors and length not specified herein
are available upon request.
Silicon Cable Type SF 600V, 200°C
(International System Unit)
Silicon Insulated Flexible
Standard: UL 62, NTC-2356. Flexible and Fixture Wire
SIZE
AWG
18
16
14
12
10
STRANDS
16
26
41
65
104
STRAND SECTION CONDUCTOR
DIAMETER
DIAMETER
(mm2)
(mm)
(mm)
0.254
0.254
0.254
0.254
0.254
0.81
1.32
2.08
3.29
5.27
1.23
1.51
1.98
2.52
3.21
INSULATION
THICKNESS
(mm)
DIAMETER
OVER
INSULATION
(mm)
APPROX.
TOTAL
WEIGHT
(kg/km)
DC
RESISTANCE
AT 20°C 1
(ohm/km)
0.76
0.76
0.76
0.76
0.76
2.83
3.11
3.58
4.12
4.81
13
19
27
40
60
21.7
13.3
8.46
5.34
3.34
Notes: 1. DC Resistance calculated based on a 17.241 ohm-mm2/km copper resistivity.
2. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
Silicon Cable Type SF 600V, 200°C
Silicon Insulated Flexible
Standard: UL 62, NTC-2356. Flexible and Fixture Wire
SIZE
AWG
STRANDS
18
16
14
12
10
16
26
41
65
104
STRAND SECTION CONDUCTOR
DIAMETER
DIAMETER
(kcmil)
(mils)
(mils)
10.0
10.0
10.0
10.0
10.0
1.60
2.60
4.10
6.50
10.40
48
59
78
99
126
INSULATION
THICKNESS
(mils)
30
30
30
30
30
DIAMETER
OVER
INSULATION
(mils)
111
122
141
162
189
Notes: 1. DC Resistance calculated based on a 10.371 ohm-cmil/ft copper resistivity.
2. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
54
APPROX.
TOTAL
WEIGHT
(lb/kft)
9
13
18
27
40
DC
RESISTANCE
AT 20°C 1
(ohm/kft)
6.61
4.07
2.58
1.63
1.02
Welding Cable
Description
Soft copper flexible conductor with Elastomer Thermoplastic insulation
Construction
Conductor
Flexible soft copper conductor, Class K stranded
Insulation
Flame Retardant Black Elastomer Thermoplastic i(TPR 105°C)
Characteristics
Operation Temperature
105° C.
Operating Voltage
600 V.
Applications
Extra hard service Cable, flexible and resistant to heavy-duty, for electric
welding equipments.
Insulation: Rough handling, abrasion and spark welding resistant.
Specifications
CENTELSA SF Cables are manufactured under the following standards:
UL 1581, NTC-3203 Reference Standard for Electrical Wires, Cables and Flexible
Cords
UL 62, NTC-2356 Flexible Cord and Fixture Wire
55
Packaging
100 m spools covered with plastic thermo pack, in corrugated carton boxes.
Note: Other configurations, sizes, colors and length not specified herein
are available upon request.
56
Welding Cable 600V, 105oC (International System Units)
BS 638. Arc welding power coerces equipment and accessories.
CENTELSA Specifications for HTS-C Cables
Standard:
SIZE
AWG
STRANDS
6
4
2
1
1/0
2/0
3/0
4/0
250
300
350
266
420
665
836
1064
1323
1666
2107
2499
2989
3458
STRAND SECTION CONDUCTOR
DIAMETER
DIAMETER
(mm2)
(mm)
(mm)
0.254
0.254
0.254
0.254
0.254
0.254
0.254
0.254
0.254
0.254
0.254
13.48
21.28
33.70
42.36
53.91
67.04
84.42
106.76
126.63
151.45
175.22
4.12
6.72
8.58
9.77
11.10
12.47
14.10
15.97
17.40
19.02
20.61
INSULATION
THICKNESS
(mm)
DIAMETER
OVER
INSULATION
(mm)
APPROX.
TOTAL
WEIGHT
(kg/km)
DC
RESISTANCE
AT 20°C 1
(ohm/km)
AMPACITY 2
(A)
2.00
2.00
2.00
2.20
2.40
2.40
2.60
2.80
2.80
3.00
3.20
8.28
10.88
12.74
14.31
16.04
17.41
19.46
21.73
23.16
25.20
27.21
168
258
389
487
616
756
947
1189
1390
1658
1933
1.30
0.826
0.522
0.415
0.326
0.262
0.208
0.165
0.139
0.116
0.100
125
170
232
270
318
369
431
505
566
639
705
Notes: 1. DC Resistance calculated based on a 17.241 ohm-mm2/km copper resistivity.
2. Ampacity based on 5 minutes working cycles and 80% Load Factor.
3. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
WELDING Cable 600V, 105oC
BS 638. Arc welding power coerces equipment and accessories.
CENTELSA Specifications for HTS-C Cables
Standard:
SIZE
AWG
STRANDS
6
4
2
1
1/0
2/0
3/0
4/0
250
300
350
266
420
665
836
1064
1323
1666
2107
2499
2989
3458
STRAND SECTION CONDUCTOR
DIAMETER
DIAMETER
(kcmil)
(mils)
(mils)
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
26.60
42.00
66.50
83.60
106.40
132.30
166.60
210.70
249.90
298.90
345.81
162
265
338
385
437
491
555
629
685
749
811
INSULATION
THICKNESS
(mils)
DIAMETER
OVER
INSULATION
(mils)
APPROX.
TOTAL
WEIGHT
(lb/kft)
DC
RESISTANCE
AT 20°C 1
(ohm/kft)
AMPACITY 2
(A)
79
79
79
87
94
94
102
110
110
118
126
326
428
502
563
631
685
766
856
912
992
1071
113
174
261
327
414
508
636
799
934
1114
1299
0.398
0.252
0.159
0.127
0.0994
0.0800
0.0635
0.0502
0.0423
0.0354
0.0306
125
170
232
270
318
369
431
505
566
639
705
Notes: 1. DC Resistance calculated based on a 10.371 ohm-cmil/ft copper resistivity.
2. Ampacity based on 5 minutes working cycles and 80% Load Factor.
3. Values herein indicated are approximated and are subject to normal manufacturing tolerances.
57