Location Settings, Sunrise and Sunset:
• The Sun Clock will automatically calculate the sunrise, sunset time based on the
city location.
Congratulations on purchasing the ThinkGizmos Wireless Weather Station.
By following these instructions carefully it will be a great asset in your local weather • Press and hold the ‘LOC’ button for 2 seconds, the short form of city name will
start flashing. Using the ‘UP’ and ‘DOWN’ buttons select the city location, press
forcasting needs.
the ‘LOC’ button again to confirm the city code.
• 160 E.U cities can be chosen from and every city is displayed in short form. The
cities are shown in the table to the right.
Weather Station Features:
• Time in optional 12/24 hour format.
Manual Time Setting:
• Date and weekday display.
• Press and hold down the ‘SET’ button for 2 seconds.
• Continuous calendar up to 2099.
• The year display ‘2007’ will start to flash. Press the ‘UP’ and ‘DOWN’ keys to to
• Two daily alarms.
set the correct year.
• Automatic snooze function.
• Barometer: Graphic display to show the air pressure, display either in mb/hPa or • Press ‘SET’ to confirm the settings.
• The month display will start to flash. Press the ‘UP’ and ‘DOWN’ keys to to set
inHg, air pressure trend display.
the correct month.
• Weather forecast using five icons: sunny, light cloud cover, cloudy, rain and
• Press ‘SET’ to confirm the settings.
stormy.
• The date display will start to flash. Press the ‘UP’ and ‘DOWN’ keys to to set the
• Temperature display in °C or °F.
correct date.
• Thermometer: Indoor measurement ranges: 0°C (32°F) - 50°C (122°F)
• Press ‘SET’ to confirm the settings.
(calibration time - 30 seconds), outdoor measurement ranges: -50°C (-58°F) • There are 7 languages of Weekday: English, Italian, French, Dutch, Spanish,
70°C (158°F) (calibration time - 30 secons). Temperature trend display either in
Danish and German, press the ‘UP’ and ‘DOWN’ keys to select.
°C or °F.
• Press ‘SET’ to confirm the settings.
• Hygrometer: Measurement range: 20%-95% RH, air humidity for indoor
The time is displayed either in 12 or 24 hour format. Briefly pressing the ‘UP’ and
measurement.
‘DOWN’ button allows you to switch beween the individual modes. The symbol AM
• Minimum / maximum displya for air humidity and temperature.
(before midday) or PM (after midday) appears after the time.
• Temperature Alert.
• LED back light display (auto off after 5 seconds if batteries are being used as the • Press ‘SET’ to confirm the settings.
• The hour display will start to flash. Press the ‘UP’ and ‘DOWN’ keys to to set the
power source).
correct hour.
• Batteries: 3xAA (not included).
• Press ‘SET’ to confirm the settings.
• DC power supply: 4.5VDC (Included).
• The minute display will start to flash. Press the ‘UP’ and ‘DOWN’ keys to to set
the correct minute.
Wireless Remote Sensor (Transmitter) Features:
• Press ‘SET’ to confirm the settings.
• Transmitter frequency: 433MHz.
• The time zones will start to flash. Press the ‘UP’ and ‘DOWN’ keys to to set the
• Range of transmission is up to 30m (Open Space)
correct time zone (-12 to +12).
• Batteries: 2xAAA (not included).
WIRELESS WEATHER FORCAST STATION
Setting The Daily Alarms:
The weather station has 2 daily alarms. To view the set alarm times, press the
Important Information
‘ALARM’ button briefly. The display switches from the clock to Alarm 1 and, if you
press the button again, to Alarm 2. (In 8 seconds, the weather station automatically
In order to get the full screen brightness and easy visability of all numbers and
symbols, we recommend you use the included mains adaptor rather than batteries returns to the normal time display).
for the main unit.
Proceed as follows to set the alarms:
• Press and hold down the ‘ALARM’ button for 3 seconds until alarm time 1 is
The remote sensor will work better if the main unit is powered by the included
displayed and the hour number is flashing.
mains adaptor rather than batteries.
• Press the ‘UP’ and ‘DOWN’ keys to to set the correct hour.
• Press ‘ALARM’ to confirm the settings.
Regarding the wireless remote sensor (which can be positioned indoors or
outdoors), if it is used outside particulatly in cold conditions we reccomend the use • The minute display will start to flash. Press the ‘UP’ and ‘DOWN’ keys to to set
the correct minute.
of Lithium AAA (requires 2) batteries as this will result in a more powerful signal
and ensure no signal loss. This is only precautionary advice and the remote sensor • Press ‘ALARM’ to confirm the settings and move onto Alarm 2.
• Follow the settings again to set the time for Alarm 2.
does work fine with normal Alkaline batteries.
If the main unit does not connect with the remote sensor, press and hold the CH
button for 2 secons and it will rescan in order to find the remote sensor.
The weather station needs to be powered for 12 hours before an accurate
predition will display.
Commissioning
• Open the battery compartment on the rear side of the weather station and
insert the batteries, taking care to observe the correct polarity. Close the battery
compartment.
• When you instert the batteries, all the symbols on the display will briefly ligh up
and you will hear a signal tone.
Activating And Deactivating The Daily Alarms:
• To activate or deactivate the daily alarms, briefly press the ‘DOWN’ button:
Press 1x: Alarm 1 activated.
Press 2x: Alarm 2 activated.
Press 3x: Both alarms activated.
Press 4x: Both alarms deactivated.
Alarm Information:
• After 8 seconds without a button being pressed, the clock switches automatically
from settings mode to normal clock mode.
• The alarm will sound for 2 minutes if you do not deactivate it by pressing any
button. In this case, the alarm will be repeated automatically after 24 hours.
• Rising Alarm (length: 2 minutes) changes the volume four times whilst the alarm
signal is heard.
• Press the ‘LIGHT’ button to activate the automatic snooze function.
City
Abbreviation
Germany
City
Abbreviation
City
Abbreviation
Paris
PAR
Grogingen
GRO
Aachen
AC
Perpignan
PER
Den Haag
HAA
Berlin
B
Lille
LIL
Rotterdam
ROT
ROU
Düsseldorf
D
Rouen
Dresden
DD
Strasbourg
STR
Erfurt
EF
Toulouse
TOU
Frankfurt
F
Flensburg
FL
Freiburg
FR
Hannover
H
Bremen
HB
Finland
Helsinki
HEL
Great Britain
Portugal
Evora
AVO
Coimbra
COI
Faro
FAR
Leiria
LEI
Lisbon
LIS
Porto
POR
Hamburg
HH
Aberdeen
ABD
Rostock
HRO
Belfast
BEL
Stralsund
HST
Birmingham
BIR
Gdansk
GDZ
Koeln
K
Bristol
BRI
Krakow
KKW
POZ
Poland
Kiel
KI
Edinburgh
EDH
Poznan
Kassel
KS
Glasgow
GLW
Szcecin
SZC
Leipzig
L
London
LON
Warsaw
WAW
Muenchen
M
Manchester
MAN
Magdeburg
MD
Plymouth
PLY
Nuremburg
N
Regensburg
R
Stuttgart
S
Saarbruecken
SB
Schwerin
SN
Russia
St Petersburg
PET
Hungary
Budapest
BUD
GOT
Malmo
MLO
ZAG
Stockholm
STO
Croatia
Zagreb
Sweden
Gothenburg
Denmark
Alborg
ALB
Arhus
ARH
Ancona
ANC
Bratislava
Copenhagen
CPH
Bari
BAI
Slovemla
Odense
ODE
Bologna
BOL
Ljubljana
Cagliari
CAG
Spain
Italy
Slovakia
Catane(catania)
CAT
Alicante
ALI
Firenze
FIR
Andorra
AND
Foggia
FOG
BRV
LJU
Juqoslavia
Berigrade
BEO
Badajoz
BAD
Genova
GEN
Barcelona
BAR
Lecce
LEC
Graz
Austria
GRZ
Bilbao
BIL
Messina
MES
Innsbruck
INN
Cadix
CAD
Milano
MIL
Linz
LNZ
Cordoba
COR
Napoli
NAP
Salzburg
SLZ
Ibiza
IBZ
Palermo
PAL
Vienna
VIE
La Corogna
LCO
Parma
PAR
Leon
LEO
Perrugia(perugia)
PER
Las Palmas
LPA
Rome
ROM
Antwerp
Belgium
ANT
Madrid
MAD
Torino
TOR
Bruges
BRG
Malaga
MAL
Trieste
TRI
Bruxellex
BRU
Palma De Mall Orca
LPM
Venezia
VEN
Charleroi
CHA
Salamanca
SAL
Ventimiglia
VER
Liege
LIE
Seville
SEV
Verona
VTG
Valencia
VAL
Zaragossa
ZAR
Switzerland
Ireland
Dublin
Basel
DUB
France
Bescancon
BES
Biarritz
BIA
Bordeaux
BOR
Brest
BRE
Luxembourg
Luxembourg
LUX
Norway
BAS
Bern
BER
Chur
CHR
Geneva
GNV
Locarno
LOC
Lucerne
LUC
St Moritz
MOR
SGL
Cherbourg
CHE
Bergen
BGN
St Gallen
Clermferrand
CMF
Oslo
OSL
Sion
SIO
Lyon
LYO
Stavanger
STA
Vaduz
VDZ
Zuerich
ZUR
Marseille
MAR
Monaco
MCO
Metz
MET
Nantes
Nice
Orleans
Netherlands
Amsterdam
AMS
NAN
Armheim
ARN
NIC
Einhoven
EIN
ORL
Wnschede
ENS
Czech Republic
Prague
PRG
Automatic Snooze Function:
• Proceed as follows to activate the automatic snooze function:
While the alarm is sounding, press the ‘LIGHT’ button to activate the snooze
function. While the snooze function is active, the ‘Zz’ symbol appears in the
display.
• This operation moves the alarm back by 5 minutes and the alarm will restart at
this time.
• The snooze function can be interrupted by pressing any button or repeated up to
7 times.
°C/°F temperature display:
The temperature is displayed either in °C/°F. Briefly pressing the ‘°C/°F’ button
allows you to switch between the individual modes.
Temperature Trend Display:
After you insert the batteries, the weather station measures the current
temperature. The trend display shows a neutral temperature course (horizontal
arrow). The further course of the trend display is determined as follows:
• If, after an hour, the temperature is more than 1°C higher than the value
measured first, then a positive course is displayed (arrow pointing upwards).
• If, after an hour, the temperature is more than 1°C lower than the value
measured first, then a negative course is displayed (arrow pointing downwards).
• If the temperature does not change within an hour, the the upward or downward
pointing arrow becomes a horizontal arrow. The measured temperature is then
taken as the neutral value from which further prognoses are made.
Maximum/Minimum Temperature/Relative Humidity:
• To toggle indoor/outdoor maximum, minimum temperature and humidity data,
press the ‘MEM’ button:
Once to show the maximum temperature and humidity values.
Twice to show the minimum temperature and humidity values.
Three times to return to the current temperature and humidity levels.
• To reset the maximum and minimum temperature and humidity, press and hold
down the ‘MEM’ button for about 2 seconds. This will reset all minimum and
maximum data recorded to the current displayed values.
Relative Humidity Trend Display:
After you insert the batteries, the weather station measures the current relative
humidity. The trend display shows a neutral relative humidity course (horizontal
arrow). The further course of the trend display is determined as follows:
• If, after an hour, the relative humidity is more than 5% higher than the value
measured first, then a positive course is displayed (arrow pointing upwards).
• If, after an hour, the relaive humidity is more than 5% lower than the value
measured first, then a negative course is displayed (arrow pointing downwards).
• If the relative humidty does not change within an hour, the the upward or
downward pointing arrow becomes a horizontal arrow. The measured relative
humidity is then taken as the neutral value from which further prognoses are
made.
Temperature Alert Setting:
• Press and hold down the ‘ALERT’ button for 2 seconds until the con for Temperature Alert starts to flash.
• The icon of Upper limit of the alarm will flash. Use the ‘MPA/INHG’ and ‘°C/°F’
buttons to set the required maximum temperature. Press the ‘ALERT’ button to
confirm the settings.
• The icon of Lower limit of the alarm will flash. Use the ‘MPA/INHG’ and ‘°C/°F’
buttons to set the required minimum temperature. Press the ‘ALERT’ button to
confirm the settings and to end the settings procedure.
• When Temperature Alert is On Alert: there are 3 beep sounds per second, the
alarm will sound for 1 minute if you do not deactivate it with any button.
Radio Connection To Outdoor Sensor:
Insert the 2 batteries in to the transmitter, pay attention to observe the correct
polarity. One sensor is supplied with your weather station and is set by default to
channel 1.
• Press and hold down the ‘CH’ button for 2 seconds to search for the outside
sensor (this will erase the current temperature data inside the clock).
Air Pressure Display:
The course of the air pressure is displayed on the display in the form of a
histogram. You have the options of displaying the air pressure in mb/hPa or in Hg.
To switch between these displays, briefly press the ‘MPA/INHG’ button.
Relative air pressure history:
The relative air pressure history can be displayed numerically to view the air
pressure changes over the last 0-12 hours.
Press the ‘HISTORY’ button to display the recorded air pressure changes during
the last 0-12 full hours. The numeric recorded air pressure will be displayed
according to the hour.
The relative air pressure is displayed either in hPa or in Hg. Briefly pressing the
‘MPA/INHG’ button allows you to switch between the individual modes.
Weather Forecast:
The weather station use the air pressure data of the last 4 hours to create a
weather forecast for the next 12 to 24 hours.
It must be taken into account that the data within the first 12 hours after
inserting the batteries will not be correct, as the weather station has to get used to
the environmental circumstances after the restart.
The forecast can be given for a radius of up to 12-20km.
When forecasting the weather, the station uses 5 icons: sunny, light cloud cover,
cloudy, rain and stormy.
Light Cloud
Cover
Sunny
Cloudy
Rainy
Stormy
Weather Forecasting Icon Settings:
Press and hold down the ‘HISTORY’ button for 2 seconds until the weather
forecasting icon flashes. Use the ‘MPA/INHG’ button to modify the 5 icons: sunny,
light cloud cover, cloudy, rain and stormy. Press the ‘HISTORY’ button again to
confirm your settings and to end the setting procedure.
The Moon Phase And Tide Indicator:
The moon icon and tide indicator of the weather station will display 8 different
moon phases and 3 kinds of tide phase according to the set calendar.
Backlight:
Briefly press the ‘LIGHT’ button to activate the display light for 5 seconds. (when
on battery power)
Meaning of the ‘Dustbin’ Symbol:
To protect our environment, do not dispose of electrical equipment in with domestic waste.
Please return any electrical equipment that you will no longer use to the collection points
provided for their disposal.
This helps to acoid the potential effects of incorrect disposal on the environment and human
health.
This will contribute to the recycling and other forms of reutilisation of electriacal and electronic
equipment.
Information concerning where the quipment can be disposed of can be obtained from your local
authority.
Fr94320992977
Made in China