“Lithification Technology” Mother Nature turns soil into rock over hundreds of thousands or even millions of years when certain naturally occurring chemicals found in the earth’s crust, come together along with optimum moisture content, heat and pressure. Sand turns into sandstone, clay turns into slate and other various soil combinations turn into rock. This process is called lithification. The Bionic Road Solution™ is a proprietary formula that duplicates this process with penetrating agents, accelerators and surfactants to turns soil into a rock-hard, water resistant surface in just 24 hours! The challenge for all “soil stabilizers” it that there are over 2000 types of clay and countless combinations of soil types involving variations in sand, silt, clay and rock causing hit and miss results at best. The top three elements found in the earth’s crust consists of oxygen, silicon and aluminum. They always combine to form aluminosilicates, which are minerals composed of aluminum, silicon, oxygen and countercations. The Bionic Soil Solution dissolves silicon and aluminum ions and the neighboring silicon and aluminum hydroxide molecules, which then undergo a condensation reaction. This reaction causes the “monomers” and other silicon and aluminum hydroxide molecules to poly-condense or polymerize, to form rigid chains or nets of oxygen bonded tetrahedral. The physical properties of the soil can often approach and sometimes even exceed the structural strength of concrete. Laboratory testing with Bionic Soil Solutions™ has demonstrated unprecedented CBR results well over 100, which measures the strength and load bearing capacity of a road after it has been submerged under water for 96 hours, which simulates a road submerged in a flood for 4 days. The ASHTO and ASTM testing standards determine this to be the most severe conditions a road should have to endure.