GeoLines 16 (2003)
the high-grade migmatites, orthogneisses and paragneisses of
the Moldanubian Zone crop out. Based on geochemical and
petrological data, most of intrusions of the batholith are interpreted as magmatic arc granitoids with involvement of mantle
derived mafic magmas situated above subduction zone. Late
stages of magmatism are represented by abundant dike swarms
cutting through both granitoids and host rock. In the present
study, we use geometry, macroscopically determined as well as
anisotropy of magnetic susceptibility fabric patterns and likely
emplacement mechanisms of individual plutons to interpret
the polyphase tectonic evolution of the Variscan magmatic arc
and we demostrate how internal fabric patterns of plutons may
be used for reconstruction of temporal evolution of strain and
stress fields in magmatic arcs and convergent orogens.
Based on field relationships, geometry, fabric patterns and
inferred emplacement mechanisms, we have recognized four
main types of plutons making up the Central Bohemian Plutonic
Complex, we describe each of these in detail below. (i) Plutons
emplaced in supracrustal level during regional transpression
(~ 350–346 Ma): these plutons are exposed along NW margin
of the batholith and comprise strongly elongate and sheet-like
(Vltava granodiorite, marginal and Milín granodiorite, Kozárovice intrusion) to more elliptical and irregular bodies (Sázava pluton – aspect ratio 2/3 in map view) emplaced during
transpressional deformation. Their common characteristics are
elongate shape in map view (with longer axis parallel to the margin and trend of regional structures) and strong internal fabrics,
entirely coupled with Barrandian host rocks (NE-SW striking
steep foliation and sub-horizontal NE-SW trending lineation
determined by mean of AMS, mostly oblate to plane strain fabrics). Mechanisms which may have accommodated pluton emplacement during transpression involve multiple material transfer processes, large-scale pressure solution, ductile shortening
of host rock and magmatic stoping. (ii) Nearly circular plutons
with coupled or partially decoupled fabric patterns (Požáry
and Nečín trondhjemites, ~350 Ma) emplaced during regional
transpression in higher crustal levels have typically very weak
magmatic fabrics, commonly parallel to margins and subhorizontal in central part of the plutons. We interpret this partially
decoupled internal fabric pattern as a result of higher ascent
velocity in contrast with strain rate of regional traspression.
Little field evidences, except the presence of stoped blocks
113
near pluton roofs, do not allow us to interpret emplacement
mechanisms of these plutons in detail. (iii) Intra-arc, younger
irregularly shaped plutons emplaced into earlier magmatic bodies as well as into high-grade migmatites and paragneisses are
represented by high-K granodiorites (Blatná and Červená granodiorites) and minor granitic sheets along southern margin of
the batholith. Fabric pattern of the Blatná granodiorite is more
complex, showing both steep transpressional magmatic fabric
trending mainly NE-SW and younger magmatic fabric dipping
at moderate angles to NNW in the SE part of intrusion. The SE
margin of the Central Bohemian Plutonic Complex was overprinted by up to 10 km wide zone of sub-solidus to solid-state
deformation displaying extensional SE-side-up kinematics with
moderately dipping stretching lineations being associated with
exhumation of the Moldanubian Zone. Emplacement of these
granitoids was probably related to gravitational collapse and
exhumation of the orogenic root domain. (iv) Tabular plutons:
tabular shape was proposed according to gravity measurements
for porphyric durbachites (Čertovo Břemeno, ~343 Ma). This
pluton has elliptical shape in map view with E-W longer axis;
our intial fabric study revealed flat to moderately dipping magmatic fabrics, which may reflect the tabular shape of this body.
In the Votice area, durbachites also occur as moderately dipping
sheet-like bodies displaying highly localized sub-solidus deformation and S-side-up kinematics resulting from exhumation of
the Moldanubian Zone. Floor depression or roof uplift due to
relaxation of vertical component of stress field may explain
the emplacement and tabular shape of the pluton. All the above
described plutons are cut by E-W dike swarms of variable composition reflecting late N-S extension. The dike swarms testify
for stress regime reversal under still high magma pressure, established after gravitational collapse.
By summarizing structural, fabric and emplacement characteristics of individual plutons making up the Central Bohemian Plutonic Complex and adjacent host rocks, we show that
magmatic processes and internal fabrics of plutons may record
complete structural history and evolution of magmatic arc from
the early crustal thickening to subsequent collapse and exhumation of deep rocks and re-establishment of original stress regime. Our data along with precise geochronology may serve as
an example of reconstruction of temporal evolution of ancient
strain and stress fields in transpressional magmatic arc.
Physical Processes Along Internal Boundaries In An Continental Arc Magma Chamber: Tuolumne Batholith, Central
Sierra Nevada, California (USA)
Jiří ŽÁK1 and Scott R. PATERSON2
1
2
Department of Geology, Faculty of Science, Charles University, Prague, Czech republic
Department of Earth Sciences, University of Southern California, Los Angeles, USA
Incremental growth of magma chambers by epizodic assembly
of magma pulses, as proposed by recent models of magma
chamber construction, dramatically affects the nature of internal processes, the rates and mechanisms by which heat and
mass are transported through the crust (and therefore rheology
and deformation of orogenic belts), and how we view and
thus solve the emplacement problem. Understanding internal
processes and their structural expression in plutons is crucial
GeoLines 16 (2003)
114
for complex evaluation of composite magmatic systems. In
the present study, we focus on physical processes operating
along internal boundaries between individual magma pulses in
a magmatic system, evolving from early sheeting to younger
nested diapirs (Tuolumne Batholith, central Sierra Nevada,
USA) and we show that structures preserved along internal
contacts may record information about the rheological state of
juxtaposed magma batches, complex flow along these boundaries, and late fabric formation during emplacement of progressively younger magma pulses and regional tectonic strain.
The Tuolumne Batholith is a large composite batholith exposed in the central Sierra Nevada (California, USA), emplaced as
a nested diapir during Late Cretaceous into low-grade metasedimentary and metavolcanic rocks and older plutons. Succesive
emplacement of four main units making up the batholith (Kuna
Crest, Half Dome and Cathedral Peak granodiorites, Johnson
granite porphyry) produced concentric array of internal contacts between compositional domains. In detail, however, internal contacts and associated igneous features vary widely, from
simple sharp or gradational contacts, sheeted domains, to very
complex zones of mingling and flow. We discovered several
domains of very complex magma mingling and flow in the eastern part of the Tuolumne Batholith, typically asocciated with
geometric irregularities and deflections of the contact. These
domains are characterized by the presence of complex magma
mingling, complicated schlieren patterns, disequilibrium microstructures, multiple magmatic sheets, gravitational instabilities
and physical accummulations of K-feldspar megacrysts. Four
distinct magmatic fabrics are developed in this domain, two of
which occur throughout the Tuolumne Batholith. The two earliest fabrics record strain during flow in pulses. A slightly younger NNW-SSE foliation is typically parallel to internal contacts,
whereas the youngest WNW-ESE foliation runs across all
internal contacts and overprints older magmatic features. Both
the regionally developed foliations share a single steeply plunging magmatic lineation, defined by identical igneous minerals.
These multiple magmatic fabrics record a temporal evolution of
strain caused by flow during chamber construction to tectonic
strain of a relatively static chambers.
Based on our field research, we reached the following
conclusions: (i) simple gradational zones between two juxtaposed magma batches represent stable contacts allowing partial
homogenization of magma pulses within transition zones and
implying slower rates of interactions and small rheological
contrasts; (ii) zones of complex magma mingling and flow,
often displaying complex, but ordered patterns, develop due
to multiple gradients introduced to the system during emplacement of magma surges along wall-rock irregularities;
(iii) internal emplacement mechanisms recorded in domains
along internal contacts in the Tuolumne Batholith involve multiple rheology-dependent processes, e.g. magma escape flow
and shortening in magmatic stage, negative volume change
of cooling magmas along margins with progressive accummulation of outward-younging sheets and thermal fracturing
and magmatic stoping of older solidified magmas; (iv) The presence of internal contacts and spatial distribution of other igneous structures in the Tuolumne Batholith are in contrast with
chamber-wide convection models, we argue for small-scale
convective structures operating during final stages of magma
chamber construction; (v) overprinting relationships show
that the youngest WNW-ESE magmatic fabrics formed after
chamber construction and represent late increments of regional
tectonic strain. We emphasize that physicochemical gradients
across the contact, relative rheology of juxtaposed magma
pulses, geometry and spatial orientation of the interface and
temporal evolution of the system, are the most important factors controlling the nature of processes along internal boundaries in magma chambers. In addition, our study provides some
field constrains on dynamic forward modelling work (Bergantz, 2000) predicting the geometry of interface between juxtaposed magma pulses for various rheologies and geometries
of the modelled system.
References
BERGANTZ G., 2000. On the dynamics of magma mixing by
reintrusion: implications for pluton assembly processes.
Journal of Structural Geology, 22: 1297-1309.
Quartz and Feldspar Rheology Contrasts under Natural
Thermal and Strain Gradients: A Comparative Study
Prokop ZÁVADA, Karel SCHULMANN, Ondrej LEXA and Jiří KONOPÁSEK
Institute of Petrology and Structural Geology, Charles University, Albertov 6, 128 43, Prague
Existing models of crustal rheology use experimentaly derived
flow laws described by constitutive equations, which are established for minerals such as plagioclase or monomineralic
rocks like quartzites, marbles. However, the crust is commonly
composed of polyphase rocks – namely granitoids, represented
by mixtures of felsic minerals of different proportions, variable
grain shape and grain-size distribution. Detailed microstructural observations, textural analysis and EBSD measurements
were used to estimate relative changes in strain partitioning and
point to inconstant ‘relative viscosity’ under different thermal
conditions and strain intensities. The study was carried out at
three paleothermal levels: