Genuine Aircraft Hardware Co. Helical Wire Inserts General Purpose Helical Coil Wire Inserts are available in locking and non locking. They are also available in different lengths in increments of one half the major thread diameter of the design thread size. Many of the MS21208 and MS21209 part numbers have been superseded by later and more confusing part numbers, so please order using these numbers and we will notify you if supersedure is applicable, based on our inventory and the availability of the various applicable part numbers. To select a part number use the prefix MS21208 for non locking MS21209 for locking then use the column on the left to find the thread size for the fastener that will be installed in the insert during final assembly. The suffix will be found on the same row as the thread size under the desired length of the insert. This is an installed length. Example of part # MS21209F410* Locking Helical Coiled Wire Insert, for 1/4-28 threads, .250” installed length or 1x diameter. *Drylube or plating is available if required. *Add an (L) for drylube or a (P) for plated to end. 194 Documents in this book for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy. All original Text, Tables and Drawings are Copyright © by Genuine Aircraft Hardware Co. 2004