47
Channel MS ...............................................................................page 48
Cantilever arm ALK/ALK Q/ALK S ......................................page 50
T-head bolt FHS CLIX ...............................................................page 52
Bolt cutter BOL N ......................................................................page 53
Female channel connector CLIX MK ...................................page 54
Channel nut HG .........................................................................page 55
Sliding nut SM ...........................................................................page 55
Channel washer HK .................................................................page 56
T-head bolt HS 38.....................................................................page 57
Channel FUS ..............................................................................page 58
Cantilever arm FCA ..................................................................page 60
Channel nut FCN.......................................................................page 61
Installation angle bracket MW ..............................................page 62
Flat fitting FFF............................................................................page 64
Universal bracket UW S ..........................................................page 65
Angle bracket WK.....................................................................page 66
Telescopic flange TSF..............................................................page 67
Saddle flange SF .......................................................................page 68
Front flange STF........................................................................page 69
Beam clamp TKR ......................................................................page 70
Cross connector VS..................................................................page 71
Base plate FPB...........................................................................page 72
Beam clamp FBC ......................................................................page 72
Channel connector SV.............................................................page 73
Rail hanger SB ...........................................................................page 74
Universal mounting UHRS......................................................page 75
Special connection angle MW S2 ........................................page 76
Channels / brackets /
accessories
Channels / brackets / accessories
48
CHANNELS / BRACKETS / ACCESSORIES
Channel MS
OVERVIEW
Channels / brackets /
accessories
MS 27/18
MS 28/30
For fastening:
▪ Pipe tracks and pipe lines
▪ Ventilation ducts
Properties:
Material
Steel DX51D+Z 275 NA-C (material no. 1.0226+Z)
acc. to DIN EN 10327
Sendzimir zinc plated, approx. 20 µm
Zinc plating
MS 30/15
MS 38/40
DESCRIPTION
MS 40/60
MS 40/120
▪ Channel as C profile for the save installation of fastenings
can be horizontally and vertically adjusted.
▪ Fast and streamlined fastening of pipe tracks and load-bearing constructions.
Advantages / Benefits
▪ High bending and pull-out strength due to optimized profile
cross section.
▪ High flexibility due to different hole geometries.
▪ Versatile options for wall, floor and ceiling installation.
▪ Specially synchronised connection parts allow for assembly
of simple, safe and versatile load bearing constructions.
▪ Simple cutting and installation due to stamped grid dimensions on the rail side.
INSTALLATION
Installation tip
▪ Good fastening possibilities using suitable fixing.
SOFTWARE
SaMontec-software 3.1 – for laying out pipe
line and construction components.
49
TECHNICAL DATA
MS 28/30
MS 30/15
MS 38/40
MS 40/60
MS 40/120
Channels / brackets /
accessories
MS 27/18
Profil 40/120 mm
Profil 40/60 mm
6000 mm
6000 mm
60 mm
120 mm
3 mm
3 mm
17 mm
17 mm
40 mm
Type
Art.-No. ID
40 mm
Qty. per box
Width
Height
Length
B
H
L
pcs.
[mm]
[mm]
[mm]
Profile
Profile cross
section
Profile
thickness
Weight
Moment of Moment of Moment of Moment of
inertia
inertia
resistance resistance
ly
lz
Wx
Wy
[cm²]
[mm]
[kg/m]
[cm4]
[cm4]
[cm³]
[cm³]
MS 27/18/1,25 - 2 m
79560 6
1
27
18
2000
27/18/1,25 - 2m
0.84
1,25
0.66
0.36
0.96
0.34
0.71
MS 27/18/1,25 - 3 m
79557 6
1
27
18
3000
27/18/1,25 - 3m
0.84
1,25
0.66
0.36
0.96
0.34
0.71
MS 27/18/1,25 - 6 m
30072 5
1
27
18
6000
27/18/1,25 - 6m
0.84
1,25
0.66
0.36
0.96
0.34
0.71
MS 28/30/1,75 - 2 m
79561 3
1
28
30
2000
28/30/1,75 - 2m
1.59
1,75
1.25
1.77
2.09
1.02
1.49
MS 28/30/1,75 - 3 m
79558 3
1
28
30
3000
28/30/1,75 - 3m
1.59
1,75
1.25
1.77
2.09
1.02
1.49
MS 30/15/2,00 - 2 m
40392 1
1
30
15
2000
30/15/2,00 - 2m
1.33
2
0.95
0.28
1.47
0.35
0.98
MS 30/15/2,00 - 3 m
40393 8
1
30
15
3000
30/15/2,00 - 3m
1.33
2
0.95
0.28
1.47
0.35
0.98
MS 38/40/2,00 - 2 m
79562 0
1
38
40
2000
38/40/2,00 - 2m
2.55
2
2.00
5.39
6.18
2.4
3.25
MS 38/40/2,00 - 3 m
79559 0
1
38
40
3000
38/40/2,00 - 3m
2.55
2
2.00
5.39
6.18
2.4
3.25
MS 38/40/2,00 - 4 m
93281 0
1
38
40
4000
38/40/2,00 - 4m
2.55
2
2.00
5.39
6.18
2.4
3.25
MS 38/40/2,00 - 6 m
30075 6
1
38
40
6000
38/40/2,00 - 6m
2.55
2
2.00
5.39
6.18
2.4
3.25
MS 40/60/3,00 - 4 m
93282 7
1
40
60
4000
40/60/3,00 - 4m
4.98
3
3.91
21.56
13.54
6.58
6.77
MS 40/60/3,00 - 6 m
14314 8
1
40
60
6000
40/60/3,00 - 6m
4.98
3
3.91
21.56
13.54
6.58
6.77
MS 40/120/3,00 - 6 m
14315 5
1
40
120
6000
40/120/3,00 - 6m
9.96
3
7.82
117.08
27.08
19.51
13.54
STAINLESS-STEEL
You will find products in stainless-steel version starting on
page 116.
LOADS
Starting on page 160, you will find everything
about the possible load values of construction
components.
50
CHANNELS / BRACKETS / ACCESSORIES
Cantilever arm ALK / ALK Q / ALK S
OVERVIEW
Channels / brackets /
accessories
Cantilever arm ALK
For fastening:
▪ Pipe tracks and pipe lines
▪ Ventilation ducts
▪ Cable trays
▪ Fittings and equipment.
Properties:
Cantilever arm ALKS
Zinc plating
Electro zinc plated, min. 8 µm
Material
Base plate:
Steel DC01 (material no. 1.0330)
acc. to DIN EN 10111
Channel:
Steel S235JR (material no. 1.0037)
acc. to DIN EN 1025
DESCRIPTION
▪ Channels as C profile with a welded base plate.
▪ Mainly for pipe mounting directly on the wall but also for
fastenings and structures on the ceiling and in the floor area.
▪ ALK Q with base plate welded on laterally.
Advantages / Benefits
▪
▪
▪
▪
Fast and simple installation of pipe lines.
Stable base plate for load-bearing constructions.
Versatile usage possibilities for stepped lengths.
Slots in the rail offer versatile installation possibilities.
INSTALLATION
▪ Good fastening possibilities using suitable fixing.
▪ Slots in the base plate offer good height adjustment.
SOFTWARE
SaMontec-software 3.1 – for laying out pipe
line and construction components.
51
TECHNICAL DATA
ALK
ALK S
ALK S
Channels / brackets /
accessories
ALK
Type
Art.-No. ID
Qty. per box
Profile
Base plate size
pcs.
Height
Length
H
L
Hole spacing
LA
[mm]
[mm]
[mm]
ALK 27/18 - 200
79575 0
20
27/18
120 x 40 x 4
-
200
79
ALK 27/18 - 300
79576 7
20
27/18
120 x 40 x 4
-
300
79
ALK 28/30 - 200
79577 4
10
28/30
120 x 40 x 4
-
200
79
ALK 28/30 - 320
79578 1
10
28/30
120 x 40 x 4
-
320
79
ALK 28/30 - 440
79579 8
10
28/30
120 x 40 x 4
-
440
79
ALK 38/40 - 200
79580 4
10
38/40
120 x 40 x 6
-
200
79
ALK 38/40 - 360
79581 1
10
38/40
120 x 40 x 6
-
360
79
ALK 38/40 - 440
63560 5
10
38/40
120 x 40 x 6
-
440
79
ALK 38/40 - 520
79582 8
10
38/40
120 x 40 x 6
-
520
79
ALK 38/40 - 600
20929 5
10
38/40
120 x 40 x 6
-
600
79
ALK 38/40 - 800
40399 0
1
38/40
120 x 40 x 6
-
800
79
ALK 38/40 - 1000
40400 3
1
38/40
120 x 40 x 6
-
1000
79
ALK 40/60 - 600
63561 2
5
40/60
144 x 70 x 6
-
600
103
ALK 40/60 - 800
63562 9
1
40/60
144 x 70 x 6
-
800
103
ALK 40/60 - 1000
63563 6
1
40/60
144 x 70 x 6
-
1000
103
ALK Q 38/40 - 440
40401 0
10
38/40
120 x 40 x 6
-
440
79
ALK Q 38/40 - 600
40402 7
10
38/40
120 x 40 x 6
-
600
79
ALKS 28/30 - 400
63581 0
5
28/30
-
315
400
-
ALKS 28/30 - 600
63594 0
5
28/30
-
400
600
-
Cantilever arm ALK Q
Cantilever arm ALKS
cover cap AK
Type
Art.-No. ID
Qty. per box
For profile
Material
27/18
28/30
polyethylene
polyethylene
pcs.
AK 27/18
AK 28/30
79565 1
79566 8
100
100
AK 38/40
79567 5
50
38/40
polyethylene
AK 40/60
48841 6
25
40/60 + 40/120
polyethylene
STAINLESS-STEEL
You will find products in stainless-steel version starting on
page 116.
LOADS
Starting on page 160, you will find everything
about the possible load values of construction
components.
52
CHANNELS / BRACKETS / ACCESSORIES
T-head bolt FHS CLIX
T-head threaded bolts with patented safety mechanism. For simple and time-saving installation.
OVERVIEW
As a connection element between:
▪ Rail load-bearing constructions and pipe clamps.
▪ Cantilever brackets and pipe clamps.
Channels / brackets /
accessories
T-head bolt
FHS Clix-N
T-head bolt
FHS Clix
Properties:
Material
Zinc plating
Steel DD11 (material no. 1.0332)
acc. to DIN EN 10111
Electro zinc plated, 8 µm
T-head bolt
FHS Clix S
DESCRIPTION
▪
▪
▪
▪
FHS Clix N – patented T-head bolt with grooved pin.
Grooved pin can be shortened using bolt cutter.
FHS Clix – for small rail profiles (27/18, 28/30, 30/15)
FHS Clix S – for large rail profiles (38/40, 40/60, 40/120,
41/21/ 41/41).
Advantages / Benefits
▪
▪
▪
▪
▪
▪
▪
Patented safety mechanism.
Simple, fast and effective installation.
Fewer individual parts than with previous fastening.
Retrofitting in rails possible.
Simple alignment in the rail.
FHS Clix N – simple height correction due to slotted pin.
Fits in all the usual rail profiles with 15 mm slot width (FHS
Clix + FHS Clix N).
INSTALLATION
Installation tips
▪ Introduce T-head bolt into the rail or bracket and turn.
▪ After the alignment, the T-head bolt should be secured with
the nut.
▪ Shorten the T-head threaded bolt by cutting off with bolt
cutter at a groove (FHS Clix-N).
SOFTWARE
SaMontec-software 3.1 – for laying out pipe
line and construction components.
53
TECHNICAL DATA
T-head bolt
FHS Clix
T-head bolt
FHS Clix-S
L1
L1
L2
L2
D
Qty. per box
For profile
Thread
D
Type
Art.-No.
Length
D
Length
L1
L2
[mm]
[mm]
ID
pcs.
FHS CLIX -N M 8 x 90
79605 4
50
27/18 + 28/30 + 30/15
M8
90
85
FHS CLIX-N M 8 x 140
79606 1
50
27/18 + 28/30 + 30/15
M8
140
135
FHS CLIX -N M 8 x 190
79607 8
50
27/18 + 28/30 + 30/15
M8
190
185
T-head bolt FHS CLIX-N
T-head bolt FHS CLIX
FHS CLIX 8 x 20
79620 7
100
27/18 + 28/30 + 30/15
M8
20
15
FHS CLIX 8 x 30
79621 4
100
27/18 + 28/30 + 30/15
M8
30
25
FHS CLIX 8 x 40
79622 1
100
27/18 + 28/30 + 30/15
M8
40
35
FHS CLIX 8 x 50
79623 8
100
27/18 + 28/30 + 30/15
M8
50
45
FHS CLIX 8 x 60
79624 5
100
27/18 + 28/30 + 30/15
M8
60
55
FHS CLIX 8 x 70
79625 2
50
27/18 + 28/30 + 30/15
M8
70
65
FHS CLIX 8 x 80
79626 9
50
27/18 + 28/30 + 30/15
M8
80
75
FHS CLIX 8 x 90
79627 6
50
27/18 + 28/30 + 30/15
M8
90
85
FHS CLIX 8 x 100
79628 3
50
27/18 + 28/30 + 30/15
M8
100
95
FHS CLIX 8 x 120
79629 0
50
27/18 + 28/30 + 30/15
M8
120
115
FHS CLIX 8 x 150
79630 6
50
27/18 + 28/30 + 30/15
M8
150
145
FHS CLIX 8 x 200
79631 3
50
27/18 + 28/30 + 30/15
M8
200
195
FHS CLIX 10 x 30
79635 1
100
27/18 + 28/30 + 30/15
M 10
30
25
FHS CLIX 10 x 40
79636 8
100
27/18 + 28/30 + 30/15
M 10
40
35
FHS CLIX 10 x 60
T-head bolt FHS CLIX-S
79637 5
100
27/18 + 28/30 + 30/15
M 10
60
55
FHS CLIX S 8 x 30
20914 1
50
38/40 + 40/60 + 40/120
M8
36
30
FHS CLIX S 8 x 40
20915 8
50
38/40 + 40/60 + 40/120
M8
46
40
FHS CLIX S 8 x 60
20916 5
50
38/40 + 40/60 + 40/120
M8
66
60
FHS CLIX S 10 x 30
20917 2
50
38/40 + 40/60 + 40/120
M 10
37
30
FHS CLIX S 10 x 40
20918 9
50
38/40 + 40/60 + 40/120
M 10
47
40
FHS CLIX S 10 x 60
20919 6
50
38/40 + 40/60 + 40/120
M 10
67
60
FHS CLIX S 12 x 30
20969 1
50
38/40 + 40/60 + 40/120
M 12
38
30
Bolt cutter BOL N
Bolt cutter BOL N
DESCRIPTION
▪ Suitable for cutting threaded rods and FHS CLIX N to size.
Type
Art.-No. ID
Qty. per box
pcs.
BOL N
79821 8
1
STAINLESS-STEEL
You will find products in stainless-steel version starting on
page 116.
LOADS
Starting on page 160, you will find everything
about the possible load values of construction
components.
Channels / brackets /
accessories
T-head bolt
FHS Clix-N
54
CHANNELS / BRACKETS / ACCESSORIES
Female channel connector CLIX MK
OVERVIEW
Channels / brackets /
accessories
Female channel connector Clix MK
As connecting element between:
▪ Rail load-bearing constructions and pipe clamps.
▪ Cantilever brackets and pipe clamps.
DESCRIPTION
▪ Female channel connector CLIX MK for small rail profiles
(27/18; 28/30; 30/15).
Advantages / Benefits
▪
▪
▪
▪
▪
Simple, fast and effective installation.
Retrofitting in rails possible.
Fewer individual parts than with previous fastening.
Simple alignment in the rail.
Fits in all the usual rail profiles with 15 mm slot width.
INSTALLATION
Installation tips
▪ Introduce fischer CLIX MK into the rail or
bracket and turn.
▪ After alignment, the threaded plate should be secured
with the nut.
TECHNICAL DATA
Female channel connector
Clix MK
D
S
B
Type
Art.-No. ID
Qty. per box
For profile
Thread
Length
Width
D
L
B
S
[mm]
[mm]
[mm]
pcs.
Thickness
CLIX MK 6
63692 3
100
27/18 + 28/30 + 30/15
M6
50
20
1,5
CLIX MK 8
63693 0
100
27/18 + 28/30 + 30/15
M8
50
20
1,5
CLIX MK 10
63694 7
100
27/18 + 28/30 + 30/15
M 10
50
20
1,5
TABLES
Pipe and ventillation duct tables. Starting on page 156,
you will find the suitable technical data.
SOFTWARE
SaMontec-software 3.1 – for laying out pipe
line and construction components.
L
CHANNELS / BRACKETS / ACCESSORIES
55
Channel nut HG / Sliding nut SM
OVERVIEW
As connecting element between:
▪ Rail load-bearing constructions and pipe clamps.
▪ Cantilever brackets and pipe clamps.
Channels / brackets /
accessories
Channel nut HG
Sliding nut SM
INSTALLATION
DESCRIPTION
▪ Fastening elements for MS rails.
Installation tip
Advantages / Benefits
▪ After alignment, the threaded plate should be secured with
the nut.
▪ Simple installation.
▪ Simple alignment in the rail.
▪ Fits in all the usual MS rail profiles with 15 mm and 17 mm
slot width.
TECHNICAL DATA
Channel nut HG
D
B
S
L
Type
Art.-No. ID
Qty. per box
For profile
Thread
Length
Length
Width
D
L1
L2
B
S
[mm]
[mm]
[mm]
[mm]
pcs.
Thickness
HG 27 M 6
49480 6
200
27/18 + 28/30 + 30/15
M6
21
25
13
4
HG 27 M 8
79595 8
100
27/18 + 28/30 + 30/15
M8
21
25
13
5
HG 27 M 10
79596 5
100
27/18 + 28/30 + 30/15
M 10
21
25
13
5
HG 38 M 6
77667 4
100
38/40 + 40/60 + 40/120
M6
39
-
16
6
HG 38 M 8
24687 0
100
38/40 + 40/60 + 40/120
M8
39
-
16
6
HG 38 M 10
24688 7
100
38/40 + 40/60 + 40/120
M 10
39
-
16
6
Sliding nut SM
D
B
S
L
Type
Art.-No. ID
Qty. per box
For profile
Thread
Length
Width
D
L
B
S
[mm]
[mm]
[mm]
pcs.
Thickness
SM 38 M 8
79600 9
50
27/18 + 28/30 + 30/15 + 38/40 + 40/60 + 40/120
M8
33
23
6
SM 38 M 10
79601 6
50
27/18 + 28/30 + 30/15 + 38/40 + 40/60 + 40/120
M 10
33
23
6
TABLES
Pipe and ventillation duct tables. Starting on page 156,
you will find the suitable technical data.
SOFTWARE
SaMontec-software 3.1 – for laying out pipe
line and construction components.
56
CHANNELS / BRACKETS / ACCESSORIES
Channel washer HK
OVERVIEW
For fastening:
▪ Channels
▪ Components on channels
Channels / brackets /
accessories
Channel washer HK
DESCRIPTION
▪ The channel washer can be used for proper fastening with a
fixing, e.g. fischer anchor bolt.
▪ Used to secure connections.
Advantage / Benefit
▪ Prevents the rail from bending.
TECHNICAL DATA
D
Channel washer HK
Type
Art.-No. ID
Qty. per box
Hole - ∅
For profile
Length
Width
D
L
B
pcs.
[mm]
[mm]
[mm]
HK 27
79650 4
50
11.5
27/18 + 28/30 + 30/15
25
33
HK 38
79651 1
50
12.5
38/40
40
43
HK 40/60
20946 2
100
12.5
38/40 + 40/60 + 40/120
50
45
CHANNELS / BRACKETS / ACCESSORIES
57
T-head bolt HS 38
OVERVIEW
As connection element between:
▪ Rail load-bearing constructions and pipe clamps
▪ Cantilever brackets and pipe clamps
Channels / brackets /
accessories
T-head bolt HS 38
INSTALLATION
DESCRIPTION
▪ T-head bolt for all standard rail profiles with
15 mm and 17 mm slot width.
Installation tips
▪ Introduce the fischer T-head bolt into the rail or bracket from
the side.
▪ After alignment, the T-head bolt should be secured with the
nut.
Advantages / Benefits
▪ Simple, fast and effective installation.
▪ Fewer individual parts than with traditional fixings.
▪ Simple alignment in the rail.
TECHNICAL DATA
B
L
T-head bolt HS 38
L1
L2
D
Type
Art.-No. ID
Qty. per box
For profile
Thread
Length
Length
Length
Width
D
L1
L2
L
B
S
[mm]
[mm]
[mm]
[mm]
[mm]
pcs.
Thickness
HS 38 M 8 x 30
79610 8
50
27/18 + 28/30 + 30/15 + 38/40 + 40/60 + 40/120
M8
30
24
30
24
6
HS 38 M 8 x 40
79611 5
50
27/18 + 28/30 + 30/15 + 38/40 + 40/60 + 40/120
M8
40
34
30
24
6
HS 38 M 8 x 60
79612 2
50
27/18 + 28/30 + 30/15 + 38/40 + 40/60 + 40/120
M8
60
54
30
24
6
HS 38 M 10 x 25
63956 6
50
27/18 + 28/30 + 30/15 + 38/40 + 40/60 + 40/120
M 10
25
19
30
24
6
HS 38 M 10 x 30
79615 3
50
27/18 + 28/30 + 30/15 + 38/40 + 40/60 + 40/120
M 10
30
24
30
24
6
HS 38 M 10 x 40
79616 0
50
27/18 + 28/30 + 30/15 + 38/40 + 40/60 + 40/120
M 10
40
34
30
24
6
HS 38 M 10 x 60
79617 7
50
27/18 + 28/30 + 30/15 + 38/40 + 40/60 + 40/120
M 10
60
54
30
24
6
SOFTWARE
SaMontec-software 3.1 – for laying out pipe
line and construction components.
STAINLESS-STEEL
You will find products in stainless-steel version starting on
page 116.
LOADS
Starting on page 160, you will find everything
about the possible load values of construction
components.
58
CHANNELS / BRACKETS / ACCESSORIES
Channel FUS
OVERVIEW
Channels / brackets /
accessories
Channel FUS 41
For fastening:
▪ Pipe strings and pipe lines
▪ Ventilation ducts
Properties:
Material
Zinc plating
Steel DX51D+Z 275 NA-C (material no. 1.0226+Z)
acc. to DIN EN 10327
Sendzimir zinc plated, about 20 µm
Channel FUS 21
DESCRIPTION
▪ Channels as C profile for producing secure fastenings that
can be adjusted laterally and in height
▪ Fast and streamlined fastening of pipe tracks and load-bearing constructions.
Advantages / Benefits
▪ High bending and tear-out strength due to optimized profile
cross section.
▪ Notched profile rail for secure hold of channel nut FCN and
FHS Clix S.
▪ High flexibility due to different hole geometries.
▪ Versatile options for wall, floor and ceiling installation.
▪ Assembly of versatile load-bearing constructions is possible
easily and securely because of specially notched connecting
parts.
▪ Simple cutting to size and installation due to the stamped
grid dimension on the rail side.
INSTALLATION
Installation tips
▪ Good fixing possibilities using suitable anchor.
▪ Fastening of FHS CLIX S or FCN possible.
SOFTWARE
SaMontec-software 3.1 – for laying out pipe
line and construction components.
59
TECHNICAL DATA
Type
Art.-No. ID
FUS 21
Qty. per box
Width
Heigth
Length
B
H
L
pcs.
[mm]
[mm]
[mm]
For profile
Profile cross
section
Profile
thickness
Weight
Moment of Moment of Moment of Moment of
inertia
inertia
resistance resistance
ly
lz
Wx
Wy
[cm²]
[mm]
[kg/m]
[cm4]
[cm4]
[cm³]
[cm³]
FUS 41/21/2,00 S - 2 m
40391 4
1
41
21
2000
41/21 slotted
1.99
2
1.48
0.92
4.39
0.85
2.13
FUS 41/21/2,00 S - 3 m
97660 9
1
41
21
3000
41/21 slotted
1.99
2
1.48
0.92
4.39
0.85
2.13
FUS 41/21/2,00 S - 6 m
97661 6
1
41
21
6000
41/21 slotted
1.99
2
1.48
0.92
4.39
0.85
2.13
FUS 41/41/2,00 S - 2 m
40390 7
1
41
41
2000
41/41 slotted
2.80
2
2.13
5.37
7.33
2.54
3.55
FUS 41/41/2,00 S - 3 m
97658 6
1
41
41
3000
41/41 slotted
2.80
2
2.13
5.37
7.33
2.54
3.55
FUS 41/41/2,00 S - 6 m
97659 3
1
41
41
6000
41/41 slotted
2.80
2
2.13
5.37
7.33
2.54
3.55
FUS 41/21/2,50 S - 2 m
92867 7
1
41
21
2000
41/21 slotted
2.43
2.5
1.71
0.99
5.28
0.91
2.56
FUS 41/21/2,50 S - 3 m
77349 9
1
41
21
3000
41/21 slotted
2.43
2.5
1.71
0.99
5.28
0.91
2.56
FUS 41/21/2,50 S - 6 m
77541 7
1
41
21
6000
41/21 slotted
2.43
2.5
1.71
0.99
5.28
0.91
2.56
FUS 41/41/2,50 S - 2 m
92295 8
1
41
41
2000
41/41 slotted
3.46
2.5
2.53
6.20
9.28
2.94
4.50
FUS 41/41/2,50 S - 3 m
77347 5
1
41
41
3000
41/41 slotted
3.46
2.5
2.53
6.20
9.28
2.94
4.50
FUS 41/41/2,50 S - 6 m
77537 0
1
41
41
6000
41/41 slotted
3.46
2.5
2.53
6.20
9.28
2.94
4.50
Channels / brackets /
accessories
FUS 41
60
CHANNELS / BRACKETS / ACCESSORIES
Cantilever arm FCA
OVERVIEW
Cantilever arm FCA
Channels / brackets /
accessories
For fastening of:
▪ Pipe tracks and pipe lines
▪ Ventilation ducts
▪ Cable trays
▪ Fittings and equipment
INSTALLATION
DESCRIPTION
▪ Channels as U profile with welded base-plate.
▪ Mainly for pipe mounting directly to the wall but also for fixings and constructions to ceilings and floor areas.
Installation tips
▪ Good fixing possibilities using suitable anchors.
▪ long slots in the base plate offer good height adjustment.
▪ Fastening FHS CLIX S or FCN possible.
Advantages / Benefits
▪
▪
▪
▪
Fast and simple installation of tracks.
Robust base plate for load-bearing constructions.
Versatile usage possibilities through stepped lengths.
Long slots in the rail offer versatile installation possibilities.
TECHNICAL DATA
Cantilever arm FCA
Type
Art.-No. ID
Qty. per box
For profile
Profile
thickness
Length
L
LA
[mm]
[mm]
[mm]
pcs.
Base plate size
Hole spacing
FCA 300
77359 8
1
41/41 slotted
2,5
325
133 x 45 x 8
90
FCA 450
77361 1
1
41/41 slotted
2,5
450
133 x 45 x 8
90
FCA 600
77363 5
1
41/41 slotted
2,5
600
133 x 45 x 8
90
FCA 750
77365 9
1
41/41 slotted
2,5
750
133 x 45 x 8
90
Cover cap FEC 21 B
Type
Art.-No. ID
Qty. per box
Cover cap FEC 41 B
For profile
Material
pcs.
FEC 21 B
77357 4
100
41/21
polyethylene
FEC 41 B
77355 0
100
41/41
polyethylene
SOFTWARE
SaMontec-software 3.1 – for laying out pipe
line and construction components.
LOADS
Starting on page 160, you will find everything
about the possible load values of construction
components.
CHANNELS / BRACKETS / ACCESSORIES
61
Channel nut FCN
OVERVIEW
DESCRIPTION
Channel nut FCN-S
▪ Fastening elements for small and large FUS rails (41/41;
41/21)
▪ Three different types:
-version without spring for all FUS rails
-with short spring for FUS 41/21 rails
- with long spring for FUS 41/41 rails
Advantages / Benefits
▪
▪
▪
▪
Channel nut FCN-L
Simple installation
Simple installation in the rail
Fits in all the usual FUS rail profiles with 21 mm slot width
Simple tension with the use of the spring
INSTALLATION
Installation tips
▪ Introduce fischer channel nut into the rail or bracket and turn.
▪ After alignment, the threaded plate should be secured with
the nut.
TECHNICAL DATA
Channel nut
FCN-L
Channel nut
FCN-S
Channel nut
FCN
Type
Art.-No. ID
Qty. per box
Type
For profile
pcs.
Thread
Length
Width
M
L
B
Thickness
S
[mm]
[mm]
[mm]
[mm]
6
FCN 6
77405 2
100
springless
41/21 + 41/41
M6
35
20
FCN 8
77407 6
100
springless
41/21 + 41/41
M6
35
20
6
FCN 10
77409 0
100
springless
41/21 + 41/41
M 10
35
20
8
FCN 12
77411 3
100
springless
41/21 + 41/41
M 12
35
20
9,5
FCN 6 S
77413 7
100
short spring
41/21
M6
35
20
6
FCN 8 S
77415 1
100
short spring
41/21
M6
35
20
6
FCN 10 S
77417 5
100
short spring
41/21
M 10
35
20
8
FCN 12 S
77419 9
100
short spring
41/21
M 12
35
20
8
FCN 6 L
77421 2
100
long spring
41/41
M6
35
20
6
FCN 8 L
77423 6
100
long spring
41/41
M8
35
20
6
FCN 10 L
77425 0
100
long spring
41/41
M 10
35
20
8
FCN 12 L
77427 4
100
long spring
41/41
M 12
35
20
9,5
Channels / brackets /
accessories
As connection element between:
▪ Rail load-bearing structures and pipe clamps
▪ Cantilever brackets and pipe clamps
Channel nut FCN
62
CHANNELS / BRACKETS / ACCESSORIES
Installation angle bracket MW
OVERVIEW
MW 27-90°
Channels / brackets /
accessories
MW 27-45°
For producing:
▪ Rail load-bearing structures
▪ Traverses
▪ Projections
▪ Supports
Properties:
Material
Steel S235 JR (material no. 1.0037)
acc. to DIN EN 10025
Electro zinc plated, 8 µm
Zinc plating
MW 38-45°
L2 38-90°
MW 38-90°
L3 38-90°
DESCRIPTION
▪ Installation angle brackets are support elements for use with
load-bearing constructions that should not be welded.
▪ Installation angle brackets are used to reinforce load-bearing
constructions.
Installation tips
INSTALLATION
Advantages / Benefits
▪ Installation advantages in producing load-bearing constructions in connection with fischer mounting rails.
▪ No welding necessary.
▪ System component can be used in many ways.
▪ Variable installation possibilities.
▪ Good fixing possibilities using suitable anchor.
▪ To simplify installation, the installation angle bracket
MW 38-45° is supplied with pre-mounted clamping screw.
SOFTWARE
SaMontec-software 3.1 – for laying out pipe
line and construction components.
63
Channels / brackets /
accessories
TECHNICAL DATA
MW 27 - 45°
MW 27 - 90°
25
MW 38 - 45°
MW 38 - 90°
MW L2 38 - 90°
MW L3 38 - 90°
40
25
6 mm
6 mm
40
75
86
75
75
45°
45 °
90 °
90°
106
106
100
8,5x25
Type
85 mm
50 mm
10,5 mm
80
10,5 mm
8,5x25
Art.-No. ID
10,5
10,5
Qty. per box
40 mm
For profile
Angle
pcs.
Length
40 mm
40 mm
Height
Width
Thickness
L
H
B
S
[mm]
[mm]
[mm]
[mm]
MW 27-45°
79656 6
25
27/18 + 28/30 + 30/15
45°
100
75
25
4
MW 27-90°
79655 9
25
27/18 + 28/30 + 30/15
90°
80
75
25
4
MW 38-45°
79658 0
10
38/40 + 41/21 + 41/41+ 40/60 + 40/120
45°
105
75
40
6
MW 38-90°
79657 3
20
38/40 + 41/21 + 41/41+ 40/60 + 40/120
90°
105
85
40
6
MW L2 38-90°
63599 5
20
38/40 + 41/21 + 41/41+ 40/60 + 40/120
90°
50
40
40
6
MW L3 38-90°
63597 1
20
38/40 + 41/21 + 41/41+ 40/60 + 40/120
90°
85
40
40
6
STAINLESS-STEEL
You will find products in stainless-steel version starting on
page 116.
LOADS
Starting on page 160, you will find everything
about the possible load values of construction
components.
40 mm
64
CHANNELS / BRACKETS / ACCESSORIES
Flat fitting FFF
OVERVIEW
Channels / brackets /
accessories
FFF 1
FFF 2
FFF 3
For producing:
▪ Rail load-bearing structures
▪ Traverses
▪ Projections
For fastening:
▪ Pipe tracks and pipe lines
▪ Pipe line components such as fittings, water meters
FFF 4
Properties:
Material
Steel S235 JR (material no. 1.0037)
acc. to DIN EN 10025
Electro zinc plated, min. 8 µm
Zinc plating
FFF 3L
FFF 4T
DESCRIPTION
▪ Robust elements for fastening pipe lines and components.
▪ The connecting plates are used to connect and reinforce
load-bearing constructions.
Advantages/Benefits
▪ Versatile connection possibilities.
▪ Simple and fast installation.
▪ Makes frame constructions in one plane possible with the
same alignment of the rail slot.
INSTALLATION
Installation tips
▪ Simple installation with FUS rails in connection with channel
nuts FCN and FHS CLIX S.
TECHNICAL DATA
Flat fitting FFF 1
Type
FFF 2
Art.-No. ID
Qty. per box
FFF 3
FFF 4
for profile
pcs.
FFF 3L
Hole - Ø
Length
Width
Thickness
L
B
S
[mm]
[mm]
[mm]
[mm]
FFF 1
77383 3
100
38/40 + 41/21 + 41/41+ 40/60 + 40/120
14
40
40
6
FFF 2
77385 7
50
38/40 + 41/21 + 41/41+ 40/60 + 40/120
14
80
40
6
FFF 3
77387 1
25
38/40 + 41/21 + 41/41+ 40/60 + 40/120
14
136
40
6
FFF 4
77515 8
25
38/40 + 41/21 + 41/41+ 40/60 + 40/120
14
184
40
6
FFF 3 L
77457 1
25
38/40 + 41/21 + 41/41+ 40/60 + 40/120
14
90
40
6
FFF 4 T
77389 5
25
38/40 + 41/21 + 41/41+ 40/60 + 40/120
14
138
40
6
FFF 4T
CHANNELS / BRACKETS / ACCESSORIES
65
Universal bracket UW S
OVERVIEW
Channels / brackets /
accessories
For producing:
▪ Rail load-bearing structures
▪ Traverses
▪ Projections
Universal bracket
UW S
Properties:
Material
Steel DD11 (material no. 1.0332)
acc. to DIN EN 10111
Electro zinc plated, 8 µm
Zinc plating
DESCRIPTION
▪ Stable angle bracket for reinforcing load-bearing constructions.
Advantages/Benefits
▪ Ideal, flexible construction element due to the option of horizontal and vertical alignment.
▪ In combination with fischer mounting rails, the universal
bracket produces a load-bearing construction with very high
stability and safety.
INSTALLATION
Installation tip
▪ The universal bracket is bolted to the mounting rail using the
long slots.
TECHNICAL DATA
Universal bracket UW S
11 mm
42 mm
4 mm
Type
Art.-No. ID
Qty. per box
For profile
pcs.
UW S
49479 0
10
38/40 + 41/41+ 40/60 + 40/120
Length
Height
Width
L
H
B
S
[mm]
[mm]
[mm]
[mm]
135
135
42
4
SOFTWARE
SaMontec-software 3.1 – for laying out pipe
line and construction components.
Thickness
135 mm
90 mm
94 mm
20 mm
66
CHANNELS / BRACKETS / ACCESSORIES
Angle bracket WK
OVERVIEW
For producing:
▪ Rail load-bearing structures, traverses, projections
For fastening:
▪ Pipe tracks and pipe lines, pipe line components such as
fittings, water meters
Channels / brackets /
accessories
Angle bracket
WK 100/100
Properties:
Material
Steel DD11 (material no. 1.0332)
acc. to DIN EN 10111
Electro zinc plated, 8 µm
Zinc plating
DESCRIPTION
▪ Stable angle bracket for fixing pipe lines and components.
▪ The angle bracket acts as a reinforcement for load-bearing
constructions.
Angle bracket
WK 200/200
Advantages/Benefits
▪ Versatile possibilities for wall, floor and ceiling installation,
can be used in shafts and also free-standing.
▪ In combination with fischer mounting rails, the universal
bracket produces a load-bearing construction with very high
stability and safety.
INSTALLATION
Installation tips
Angle bracket
WK 207/165
▪ Good fixing possibility using suitable anchor.
▪ Thanks to bolting two angle brackets, significantly higher
load and bending values are achieved. (Load values in technical appendix).
TECHNICAL DATA
WK 100/100
40
100
200
WK 200/200
WK 207/165
46
207
13x18
13x22
13x22
40
40
Type
Art.-No. ID
40
Qty. per box
16
165
125
90
100
200
4
4
43
4
82
Ø 10,5
13x18
For profile
pcs.
Length
Height
Width
L
H
B
Thickness
S
[mm]
[mm]
[mm]
[mm]
WK 100/100
63559 9
5
38/40 + 41/21 + 41/41+ 40/60 + 40/120
100
100
40
4
WK 200/200
79570 5
5
38/40 + 41/21 + 41/41+ 40/60 + 40/120
200
200
40
4
WK 207/165
79571 2
6
38/40 + 41/21 + 41/41+ 40/60 + 40/120
207
165
40
4
TABLES
Pipe and ventillation duct tables. Starting on page 156,
you will find the suitable technical data.
LOADS
Starting on page 160, you will find everything
about the possible load values of construction
components.
CHANNELS / BRACKETS / ACCESSORIES
67
Telescopic flange TSF
For producing:
▪ Rail load-bearing constructions
▪ Traverses
▪ Projections
Telescopic flange TSF
Properties:
Material
Steel DD11 (material no. 1.0332)
acc. to DIN EN 10111
Electro zinc plated, 8 µm
Zinc plating
DESCRIPTION
▪ Ideal, flexible connecting element for producing constructions in connection with the fischer mounting rails.
Advantages / Benefits
▪ Simple and fast installation using the T-head bolt FHS Clix.
▪ Height and length differences up to 5 cm can be compensated quickly and easily.
▪ Can be used ideally in tight application areas using telescopic
function.
▪ Free rail opening, e.g. for pipe connections.
INSTALLATION
Installation tips
▪ Installation is carried out by sliding into the mounting rail and
the fastening by means of FHS Clix or by screwing.
▪ Good fixing possibility using suitable anchor.
▪ Good height adjustment due to long slots in the base plate.
TECHNICAL DATA
Telescopic flange TSF
Type
Art.-No. ID
Qty. per box
For profile
Version
pcs.
Length
Width
L
B
Thickness Hole spacing
S
LA
Height
H
[mm]
[mm]
[mm]
[mm]
[mm]
TSF L 38/40
63611 4
15
38/40
vertical
145
40
6
105
126
TSF Q 38/40
63621 3
15
38/40
horizontal
145
40
6
105
126
TSF L 40/60
63624 4
15
40/60 + 40/120
vertical
145
70
6
105
126
TSF Q 40/60
63629 9
15
40/60 + 40/120
horizontal
145
70
6
105
126
SOFTWARE
SaMontec-software 3.1 – for laying out pipe
line and construction components.
Channels / brackets /
accessories
OVERVIEW
68
CHANNELS / BRACKETS / ACCESSORIES
Saddle flange SF
OVERVIEW
Saddle flange SF Q
Channels / brackets /
accessories
For producing:
▪ Rail load-bearing structures
▪ Traverses
▪ Projections
Properties:
Material
Base plate: Steel DD11 (material no. 1.0332)
acc. to DIN EN 10111
U-Profil: S235JR acc. to DIN EN 10025
Electro zinc plated, 8 µm
Zinc plating
Saddle flange SF L
DESCRIPTION
▪ Connecting element for producing robust constructions in
connection with the fischer mounting rails.
Advantages / Benefits
▪ Solid connecting element for load-bearing constructions.
▪ Simple installation by inserting the mounting rail in the
saddle.
INSTALLATION
Installation tips
▪ Insert and screw the mounting rail in the saddle flange.
▪ Good fixing possibility using suitable anchor.
▪ Good height adjustment using slots in the base plate.
TECHNICAL DATA
Saddle flange SF L
Saddle flange SF Q
Type
Art.-No. ID
Qty. per box
For profile
version
pcs.
Length
Width
Thickness
L
B
S
Hole spacing
LA
[mm]
[mm]
[mm]
[mm]
SF Q 27
79409 8
15
27/18 + 28/30 + 30/15
horizontal
125
40
5
84
SF L 27
79585 9
15
27/18 + 28/30 + 30/15
vertical
114
50
5
73
horizontal
136
50
6
95
vertical
144
70
6
103
SF Q 38
79410 4
10
38/40 + 41/21 + 41/41 +
40/60 + 40/120
SF L 38
79586 6
8
38/40 + 41/21 + 41/41 +
40/60 + 40/120
SOFTWARE
SaMontec-software 3.1 – for laying out pipe
line and construction components.
STAINLESS-STEEL
You will find products in stainless-steel version starting on
page 116.
CHANNELS / BRACKETS / ACCESSORIES
69
Front flange STF
For producing:
▪ Light rail load-bearing constructions
▪ Light traverses
▪ Light projections
Front flange STF Q
Properties:
Material
Base plate: Steel DD11 (material no. 1.0332)
acc. to DIN EN 10111
Flat steel: S235JR (material no. 1.0037)
acc. to DIN EN 10025
Electro zinc plated, 8 µm
Zinc plating
Front flange STF L
DESCRIPTION
▪ Connecting element with pre-assembled clamping screws for
producing light constructions in connection with the fischer
mounting rails.
Advantages / Benefits
▪ Simple installation by sliding into the mounting rail.
▪ Time-saving installation due to pre-assembled clamping
screws.
INSTALLATION
Installation tips
▪ Sliding the front flange into the mounting rail and tighten.
▪ Good fixing possibility using suitable anchor.
▪ Good height adjustment due to long slots in the base plate.
TECHNICAL DATA
Front flange
STF L
ø7,1
79
Front flange
STF Q
11 x 20
Type
Art.-No. ID
Qty. per box
For profile
Version
pcs.
Length
Width
Thickness
Hole spacing
L
B
S
LA
[mm]
[mm]
[mm]
[mm]
79
STF Q 27
79590 3
20
27/18 + 28/30 + 30/15
horizontal
120
40
4
STF L 27
79592 7
20
27/18 + 28/30 + 30/15
vertical
120
40
4
79
STF Q 38
79591 0
20
38/40 + 40/60
horizontal
120
40
4
79
STF L 38
79593 4
15
38/40 + 40/60
vertical
120
40
4
79
SOFTWARE
SaMontec-software 3.1 – for laying out pipe
line and construction components.
STAINLESS-STEEL
You will find products in stainless-steel version starting on
page 116.
Channels / brackets /
accessories
OVERVIEW
70
CHANNELS / BRACKETS / ACCESSORIES
Beam clamp TKR
OVERVIEW
Channels / brackets /
accessories
Beam clamp TKR
For fastening:
▪ Rails to steel girders
DESCRIPTION
▪ Stirrup for fastening profile rails to steel girders.
Advantages / Benefits
▪ No drilling or welding necessary.
▪ Adjustment is possible at any time.
▪ Due to the different lengths of the claw sides, the fischer
clamp supporter can be fastened to all standard T-beams.
INSTALLATION
Installation tip
▪ Two clamp supports are necessary for fastening to the steel
girder.
TECHNICAL DATA
Beam clamp TKR
A
D
B
G
H
Type
Art.-No. ID
Qty. per box
Max. recom.
static load
(centr. tension)
pcs.
Nrecom.
[kN]
For profile
Thread
Fixing thickness
Thread
distance
A
B
H
G
[mm]
[mm]
[mm]
[mm]
[mm]
D
Width
Height
Thread length
TKR 27/18
79411 1
25
2.80
27/18 + 28/30
M6
0 - 29
37
60
81
60
TKR 38/40
79412 8
20
5.40
38/40
M8
0 - 24,5
47
70
86
55
TKR 40/60
49435 6
20
10.50
40/60
M 10
0 - 24,5
51
80
109
50
TKR 40/120
30379 5
20
6.50
40/120
M 10
0 - 24,5
51
80
189
50
TABLES
Pipe and ventillation duct tables. Starting on page 156,
you will find the suitable technical data.
SOFTWARE
SaMontec-software 3.1 – for laying out pipe
line and construction components.
71
CHANNELS / BRACKETS / ACCESSORIES
Cross connector VS
OVERVIEW
Cross connector VS 3
Channels / brackets /
accessories
For producing:
▪ Stable traverses
▪ Installation grids
Cross connector VS 4
DESCRIPTION
▪ Connecting element for producing a grid of one mounting
rail MS 40/120 as longitudinal rail and an MS 40/60 rail as
transverse rail.
▪ The fischer cross connector makes a simple suspended ceiling with the use of threaded rods.
Advantages / Benefits
▪ Simple and time-saving production of an installation grid or
of traverses.
▪ Simple and time-saving installation by insertion of the mounting rail MS 40/60 in a saddle.
▪ Production of robust traverses.
▪ Good and simple possibility for aligning traverses.
INSTALLATION
Installation tips
▪ Hook the fischer end-to-end connector into the fischer
mounting rail MS 40/120.
▪ Insert the fischer mounting rail in the fischer cross
connector and tighten the holding shackle using T-head
threaded bolt FHS Clix S.
▪ Suspend ceiling using threaded rods.
TECHNICAL DATA
Cross
connector
VS 4
60 mm
60 mm
13 mm
13 mm
32 mm
32 mm
42 mm
Type
Art.-No. ID
Qty. per box
For profile
pcs.
VS 3
1)
64057 9
8
40/60 + 40/120
VS 4
1)
64088 3
5
40/60 + 40/120
1) with holding shackle
123 mm
16 mm
74 mm
63 mm
123 mm
74 mm
16 mm
63 mm
Cross
connector VS 3
42 mm
72
CHANNELS / BRACKETS / ACCESSORIES
Base plate FPB
TECHNICAL DATA
Channels / brackets /
accessories
Base plate FBP
Type
Art.-No. ID
Qty. per box
For profile
Hole - Ø
pcs.
FBP 2
77401 4
8
[mm]
41/41
14
Beam clamp FBC
TECHNICAL DATA
Beam clamp FBC 1 L
For fastening:
▪ Rails to steel beams
Properties:
Material
Zinc plating
Steel S235 JR (material no. 1.0037)
acc. to DIN EN 10025
Electro zinc plated, 8 µm
DESCRIPTION
▪ Stirrup for fastening profile rails to steel beams.
Advantages / Benefits
▪ No drilling or welding necessary.
▪ Adjustment is possible at any time.
▪ Due to the different lengths of the claw sides, the fischer
clamp support can be fastened to all standard T-beams.
Beam clamp FBC 5 U
INSTALLATION
Installation tip
▪ Two clamp supporters are necessary for fastening to the
steel beam.
TECHNICAL DATA
Type
Art.-No. ID
Qty. per box
For profile
Screw
ds x ls
[mm]
pcs.
FBC 1 L
77391 8
50
41/41 + 41/21
M 10 x 40
FBC 5 U
77399 4
25
41/41 + 41/21
-
CHANNELS / BRACKETS / ACCESSORIES
73
Channel connector SV
OVERVIEW
Channel connector SV 27
For producing:
▪ Channel connections
Material SV 27 / SV 38
Material SV 40
Zinc plating
Channel connector SV 40
Channels / brackets /
accessories
Properties:
Steel DC01 (material no. 1.0330)
acc. to DIN EN 10130
Steel DD11 (material no. 1.0332)
acc. to DIN EN 10111
Electro zinc plated, 8 µm
DESCRIPTION
▪ Mounting rails can be connected and aligned precisely with
the fischer channel connector.
Advantages / Benefits
▪ Robust and fast connection of mounting rails
▪ Simple installation by sliding into the mounting rail.
▪ Screws enable secure connection.
INSTALLATION
Installation tips
▪ The channel connectors SV 27 and SV 38 are inserted into
the rail ends and then screwed tight.
▪ The channel connector SV 40 is introduced into the rails to
be connected MS 40/60 or MS 40/120 and then secured
and screwed together using 4 location clamps HK 40.
▪ Location clamps HK 40 (art. no. 20946) and locking screws
SKS 10x20 (art. no. 79416) and washers U 10x28 are
included (pre-assembled).
TECHNICAL DATA
Channel connector SV 27
Channel connector
SV 40
M 10
33,5 mm
500 mm
53,5 mm
5 mm
Type
Art.-No. ID
Qty. per box
For profile
pcs.
SV 27
79660 3
20
SV 38
79661 0
10
27/18 + 28/30
38/40
SV 40
63643 5
1
40/60 + 40/120
74
CHANNELS / BRACKETS / ACCESSORIES
Rail hanger SB
OVERVIEW
Channels / brackets /
accessories
Rail hanger SB
For fastening:
▪ Rail load-bearing constructions
Properties:
Material
Zinc plating
INSTALLATION
DESCRIPTION
▪ Universal connecting element that connects a horizontal
with vertical rails (crosswise connection).
Advantages / Benefits
▪ Static connection without rotation.
▪ Variable installation possible due to hole pattern.
TECHNICAL DATA
Rail hanger SB
Type
S 355 MC (material no. 1.0976)
acc. to DIN EN 10149
Alternatively: DD11 (material no. 1.0332)
acc. to EN 10111
Electro zinc plated, 8 µm
Art.-No. ID
Qty. per box
For profile
pcs.
SB 38/40
20926 4
25
SB 40/60
20927 1
25
38/40
40/60
SB 40/120
20928 8
25
40/120
Installation tip
▪ Sliding hanger is placed over the mounting rail and connected by way of the flange holes with another mounting rail
or the construction.
CHANNELS / BRACKETS / ACCESSORIES
75
Universal mounting UHRS
OVERVIEW
Universal mounting
UHRS
Channels / brackets /
accessories
For producing:
▪ Rail load-bearing constructions
▪ Traverses
▪ Framing
For fastening:
▪ Mounting rails
▪ Construction elements
Properties:
Material
Zinc plating
Steel DD11 (material no. 1.0332) acc. to DIN EN
10111
Electro zinc plated, 8 µm
DESCRIPTION
▪ With the universal bracket, products (rails, threaded rods)
can be installed in connection with the T-head bolt at different angles.
Advantages / Benefits
▪ Ideal for installing roof trusses, oblique angles or frame-like
constructions.
▪ For oblique spans in the installation grid.
INSTALLATION
Installation tip
▪ Rail constructions are possible using the channel angle
bracket MW S2.
TECHNICAL DATA
Universal mounting UHRS
12 mm
37 mm
15 mm
90 mm
13 mm
40 mm
∅ 12 mm
Type
Art.-No. ID
Qty. per box
Max. recom.
static load
(centr. tension)
Connection
Nrecom.
UHRS
63938 2
pcs.
[kN]
6
8.30
M8, M10, M12
76
CHANNELS / BRACKETS / ACCESSORIES
Special connection angle MW S2
OVERVIEW
For producing:
▪ Rail load-bearing constructions
▪ Traverses
▪ Projections
Channels / brackets /
accessories
Special connection
angle MW S2 38-90°
Properties:
Material
Steel DD11 (material no. 1.0332)
acc. to DIN EN 10111
Electro zinc plated, 8 µm
Zinc plating
DESCRIPTION
▪ Connecting element that connects a horizontal rail to a vertical rail.
Advantages / Benefits
▪ Invisible connection from rail to rail.
▪ Rail opening can be fully utilized.
INSTALLATION
Installation tips
▪ Fastening of the bracket with the vertical rail using T-head
threaded bolt.
▪ After which, the horizontal rail is bolted to the channel angle
bracket.
TECHNICAL DATA
Special connection
angle MW S2 38-90°
Type
Art.-No. ID
Qty. per box
For profile
pcs.
MW S2 38-90°
63610 7
25
38/40 + 40/60
Length
Heigth
Width
L
H
B
Thickness
S
[mm]
[mm]
[mm]
[mm]
42
33
30
4