F5U109
SPECIFICATIONS
CONTENTS
1. GENERAL SPECIFICATIONS ....................................... 1
1.1 PRODUCT SURFACE ............................................................. 1
1.2 PRODUCT DIMENSION......................................................... 2
1.3 PRODUCT FEATURES ........................................................... 5
1.4 PRODUCT SPECIFICATIONS................................................ 6
1.5 CIRCUIT BLOCK DIAGRAM ................................................ 7
2. CHIPSET SPECIFICATIONS ......................................... 8
2.1 CHIPSET FEATURES ............................................................. 8
2.2 BLOCK DIAGRAM ............................................................... 10
3. PCB SPECIFICATIONS................................................. 12
3.1 PCB LAYOUT ....................................................................... 12
3.2 PCB DIAGRAM..................................................................... 13
3.3 LED INDICATOR.................................................................. 15
4. CABLE SPECIFICATIONS ........................................... 16
4.1 CABLE FEATURES .............................................................. 16
4.2 CABLE DIMENSION ............................................................ 17
5. CONNECTER SPECIFICATIONS ............................... 18
5.1 RS232 PORT CONNECTER.................................................. 18
Data of Release
Mar, 03, 05
Model No.
F5U109
1. GENERAL SPECIFICATIONS
1.1 PRODUCT SURFACE
Page No
01
Data of Release
Mar, 03, 05
Model No.
F5U109
02
Page No
Magic Control Technology Corporation
茂傑國際有限公司
1.2 PRODUCT DIMENSION
Model No.
F5U109
03
Page No
Magic Control Technology Corporation
Mar, 03, 05
茂傑國際有限公司
Data of Release
Model No.
F5U109
04
Page No
Magic Control Technology Corporation
Mar, 03, 05
茂傑國際有限公司
Data of Release
Data of Release
Mar, 03, 05
Model No.
F5U109
Page No
1.3 PRODUCT FEATURES
● Full compliance with USB Spec. Rev 1.1.
● Support Hot-swapping and Plug & Play.
● Compatibility List for RS232 port :
(1) Modem
(3) Digital camera
(5) Card reader
(7) Barcode reader
(9) POS
(11) PalmⅢ& PalmⅤ
(2) ISDN-TA
(4) Label writer
(6) Serial mouse
(8) Tablet
(10) Fingerprint Verification
(12) Security System
● Compliant with UHCI & OHCI spec
● Windows 98SE/ME/2000/XP compatible.
● Mac OS 8.6 ~ 10.x compatible.
● Pin signal description
DB9 Pin umber
1
2
3
4
5
6
7
8
9
Name
DCD
RXD
TXD
DTR
SGND
DSR
RTS
CTS
RI
Define
Data Carrier Detected
Received Data
Transmitted Data
Data Terminal Ready
Signal Ground
Data Set Ready
Request to Send
Clear to Send
Ring Indicator
05
Data of Release
Mar, 03, 05
Model No.
F5U109
Page No
1.4 PRODUCT SPECIFICATIONS
Item
Specification
Windows 98SE/ME
Driver Version
Windows 2000/XP
Ver 1.21P.0104.1
Ver 1.20P
for WIN2KXP
Chipset
87C52
PCB Version
USB-1S BELKIN Ver 1.2
Cable Dimension
USB Cable: L=390±10, Ø4.5 (mm)
Case Dimension
L=87.3; W=38.1; H=13.5 (mm)
Cable Material
PVC Molding
Case Material
ABS
Power Supply
Bus Power
Working Current
41.8 mA
Suspend Current
21.9 mA
06
Data of Release
Mar, 03, 05
F5U109
Model No.
Page No
07
1.5 CIRCUIT BLOCK DIAGRAM
BUS POWER
USB BUS
D-
DC 5V
D+
GROUND
3.3V
PDIUSBD12
Data
Bus
PHILIPS
87C52
3.3V
REG
93C66
HIN211
6MHz
36.864MHz
RS232
INTERFACE
DB9M
Data of Release
Mar, 03, 05
Model No.
F5U109
Page No
08
2. CHIPSET SPECIFICATIONS
2.1CHIPSET FEATURES
2.1.1 PHILIPS 87C52
● Complies with the Universal Serial Bus spec. Rev1.1.
● High performance USB interface device with integrated SIE,
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
FIFO memory, transceiver and voltage regulator.
Compliant with most Device Class specifications.
Fully autonomous DMA operation.
Double buffering scheme for main endpoint increases
throughput and eases real time data transfer.
1Mbyte/s data transfer rate achievable in Bulk mode, 1Mbit/s
data transfer rate achievable in isochronous mode.
Bus-powered capability with very good EMI performance.
Controllable Lazy Clock output during suspend.
Software controllable connection to the USB bus.
(Soft Connect™ )
Good USB connection indicator that blinks with traffic.
(Good Link™ )
Programmable clock frequency output.
Complies with the ACPI, OnNOW, and USB power
management requirements.
Internal power-on reset and low voltage reset circuit.
Available in SO28 and TSSOP28 pin packages.
Full industrial grade operation from -40 to +85°C.
Higher than 8kV in-circuit ESD protection lowers cost of
extra components.
Full-scan design with high fault coverage ( > 99%) ensures
high quality.
Operation with dual voltage:
3.3 ± 0.3V or extended 5V supply range of 3.6 – 5.5V.
Multiple interrupt modes to facilitate both bulk and
isochronous transfers.
Data of Release
Mar, 03, 05
Model No.
F5U109
Page No
09
2.1.2 PHILIPS PDIUSBD12
● Complies with the Universal Serial Bus spec. Rev1.1.
● High performance USB interface device with integrated SIE,
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
FIFO memory, transceiver and voltage regulator.
Compliant with most Device Class specifications.
High-speed (2 Mbytes/s) parallel interface to any external
microcontroller/microprocessor.
Fully autonomous DMA operation.
Double buffering scheme for main endpoint increases
throughput and eases real time data transfer.
1Mbyte/s data transfer rate achievable in Bulk mode, 1Mbit/s
data transfer rate achievable in isochronous mode.
Bus-powered capability with very good EMI performance.
Controllable Lazy Clock output during suspend.
Software controllable connection to the USB bus.
(Soft Connect™ )
Good USB connection indicator that blinks with traffic.
(Good Link™ )
Complies with the ACPI, OnNOW, and USB power
management requirements.
Internal power-on reset and low voltage reset circuit.
Full industrial grade operation from -40 to +85°C.
Higher than 8kV in-circuit ESD protection lowers cost of
extra components.
Full-scan design with high fault coverage ( > 99%) ensures
high quality.
Operation with dual voltage:
3.3 ± 0.3V or extended 5V supply range of 3.6 – 5.5V.
Multiple interrupt modes to facilitate both bulk and
isochronous transfers.
Data of Release
Mar, 03, 05
Model No.
2.2 BLOCK DIAGRAM
2.2.1 PHILIPS 87C52
F5U109
Page No
10
Data of Release
Mar, 03, 05
Model No.
2.2.2 PHILIPS PDIUSBD12
F5U109
Page No
11
Data of Release
Mar, 03, 05
Model No.
F5U109
Page No
3. PCB SPECIFICATIONS
3.1 PCB LAYOUT
● PCB size (L × W × H): 69.4 mm × 25.6 mm × 1.65 mm
● PCB material: Fiberglass (FR-4).
● PCB layer: 4 Layers
● PCB version: USB-1S BELKIN Ver 1.2.
12
Data of Release
Mar, 03, 05
Model No.
3.2 PCB DIAGRAM
3.2.1 PCB UP DIAGRAM
F5U109
Page No
13
Data of Release
Mar, 03, 05
Model No.
3.2.2 PCB DOWN DIAGRAM
F5U109
Page No
14
Data of Release
Mar, 03, 05
Model No.
F5U109
Page No
15
3.3 LED INDICATOR
● Green LED lights up (LINK):
The USB TO RS232 plugs-into the host controller, and works
correctly.
● Red LED Blink (TX, RX):
The USB TO RS232 downstream ports receive the RS232
devices data signal to the PC.
Data of Release
Mar, 03, 05
Model No.
F5U109
Page No
4. CABLE SPECIFICATIONS
4.1 CABLE FEATURES
NOTE:
1. 4P USB “A” MALE CONNECTOR
2. PVC MOLDING (CTN-P-039)
3. UL2725 28#1P+24#2C+AS Ø4.5mm L=390 ±10 mm
(CTN-P-039)
4. SR MOLDING (CTN-P-039)
5. Ø1.0*25mm HEAT SHRINK TUBE (THIN)
6. 2.5 PINCH 5P HOUSING
7. 2.5 PINCH TERMINAL
PIN ASSIGNMENT:
1-------RED-------1
2-----WHITE-----2
3-----GREEN-----3
4-----BLACK-----4
SHELL------------5
16
Data of Release
Mar, 03, 05
Model No.
4.2 CABLE DIMENSION
F5U109
Page No
17
Data of Release
Mar, 03, 05
Model No.
F5U109
5. CONNECTER SPECIFICATIONS
5.1 RS232 PORT CONNECTER
Page No
18