RACK ASSEMBLIES
Rack Mount
Various Kikusui products can be easily mounted
in a rack by using a bracket and rack mount
frame, rack adaptor, etc.
JIS standa rds (m illimeter size) and EI A
standards (inch size) racks are available.
Brackets and rack mount frames, rack adaptors,
etc. applicable to each type are also available.
Since the width of one panel is 50mm for JIS
Standards and 44.45mm for EIA Standards, the
bracket and rack mount frame, etc. of the panel
width matched to the product body are selected
based on one panel width.
Racks
The KRO Series are designed in accordance
with both JIS Standards and EIA Standards.
Pay load weight
Model
Open rack
(KRO series)
Decorative rack
(KRC series)
Decorative rack
(KRC series)
Production item
upon order
kg
KRO1600
KRO1250
KRO900
KRC363L
KRC273L
KRC363
KRC273
KRC1603
KRC1603L
KRC1203
KRC1203L
Approx. 300
Number of panels
JIS
32
25
18
Approx. 300
Approx. 300
Since these racks are equipped with support
angle as standard, even heavy products can be
mounted. (With products weighing more than
70kg, use a rack with brackets.)
The KRO Series conforms both JIS and EIA
standards simply replacing the front panel with
the rear panel.
The KRC series is a multifunctional decorative
rack that is based on a steel cabinet rack and
designed to allow the attachment of various
rack options.
In addition to having models that meet two
different standards (JIS and EIA) and being
available in two overall heights (1,835 mm and
1,435 mm), this series comes in depths of 800
mm and 950 mm (two types), giving it eight
models in all. Also, additional support angles
EIA
36
28
20
36
27
36
27
Overall height
Weight
mm
1825
1475
1125
1835
1435
1835
1435
kg
55
50
45
95
85
90
75
90
95
75
85
32
1835
24
1435
The length for
maximum surface
700
950
800
800
950
800
950
Support
angle
12 (6 pairs)
10 (5 pairs)
8 (4 pairs)
12 (6 pairs)
10 (5 pairs)
12 (6 pairs)
10 (5 pairs)
12 (6 pairs)
(two types), base fittings and suspension
eyebolts a re available as sepa rately sold
options.
The Enclosed type rack
(Custom Product on request)
The rack system that will be used for concerning
the heat generated from the Power Supplies,
c o n sid e r a ble a m o u n t of t h e d u s t a s a n
environmental condition, metal corrosion
o c cu r r e d such a s at plat i ng fa ctor y, a n
electrolytic chemical synthesis factory.
(*The water cooled unit will be built in the
system which require for the water pipe and
drain)
Support
leveler
Options
Support angle Base hold angle
4
4
4
OP01-KRC
OP02-KRC
*1
OP03-KRC
*2
10 (5 pairs)
• The KRO Series payload weight can be increased to approximately 400kg by changing the casters.
• The KRO Series are sold in kit form.
• The support angle is designed for Kikusui racks and products. It is not interchangeable with products of the other manufacturer.
*1:These support angles (OP01-KRC) are equivalent to the support angles incorporated into the main rack unit.
They come in a two-item (1-pair) set. When the product weight exceeds 70 kg, use a weight support angle (OP02-KRC).
*2:These L-shaped fittings (OP03-KRC) secure the base of the rack to the floor. The set includes four main fitting components and the bolts and nuts that secure the fittings to the bases.
*3:These eyebolts (OP04-KRC) are specially made for the KRC series. The set includes four M12 eyebolts.
KRO Series
Support angle
Anchor bolt
90
www.kikusui.co.jp
KRC Series
Eyebolt
The Enclosed type rack
OP04-KRC
*3
RACK ASSEMBLIES
Racks Mount
Rack model No.
JIS Standard rack (millimeter size)
EIA Standard rack (inch size)
1 panel height : 50mm
1 panel height : 44.45mm
1601.5mm
32 panels pitches
KRO1600
KRC363(L)
KRC1603(L)
1601.5mm
36 panels pitches
7mm
25mm
50mm
50mm
31.75mm
12.7mm
31.75mm
465
Pitch magnified view
1250mm
25 panels pitches
KRO1250
1250mm
28 panels pitches
1200mm
24 panels pitches
KRC273(L)
KRC1203(L)
1200mm
27 panels pitches
900mm
18 panels pitches
KRO900
900mm
20 panels pitches
465
KRO Series
Pitch magnified view
15.875mm 7mm
31.75mm
12.7mm
31.75mm
465
MIN400
MIN400
KRO(465)/KRC(452)
KRO(465)/KRC(452)
KRO(530)/KRC(570)
KRO(530)/KRC(570)
15.875mm
KRC Series
Pitch magnified view
Racks & Accessories
■For use with rack mounting frame and special brackets
■For use with rack adapter
RMF4 and RMF4M are rack mount frames to be used with standard racks.
Designed to meet the EIA/JIS standards, they are used to install models ranging
from 1/2 rack to 1/6 rack in width using a rack mount frame bracket.
KRA3 and KRA150 are rack adapters conforming to EIA/JIS standards to be
used with standard racks. Power supplies can be stored without using brackets.
RMF-4M
Blank panel (sold separately)
460
480/482
57
132.5
149
100
102
177
199
50 50 50
465
480/482
57
132.5
102
177
(mm)
149
100
400H
199
50 50 50
KRA3
400H
444*
24.5
KRA150
444*
RMF-4
465
480/482
Complied products
●PWR Series (400/800W)
●PAS Series
●PAK-A Series
●PMC-A Series
●PMC Series
●PMP Series
●PMR Series
●PCR500M
●PLZ-3WH Series (TYPE I)
●PLZ-4W Series (TYPE I)
●PIA3200/4800 Series
24.5
Complied products
●PAN-A Series
●PLZ-W2 Series
(mm)
460
480/482
(mm)
(mm)
■ Bracket
■ Blank panel
The bracket can be used to install models of 1 (1/1) rack in width directly in
the rack.
When using brackets to install models liable to give off heat, it is necessary to
provide at least the minimum number of blank panels required for each model.
Plate-type panels and mesh-type blank panels are also available.
Sample for the bracket (Pair of right and left portion)
Sample for the blank panel
www.kikusui.co.jp
91
RACK ASSEMBLIES
EIA Standard Rack (Inch Size) Mounting Options
Bracket
Blank panel
Rack mount frame
Rack adapter
Bracket necessary when
Product
name
Bracket
Rack
adaptor
Panel
Panel
"M"
is
added
Rack
mount
frame
Panel
fastening mainframe to rack
model No. width(*) for mesh type
model No.
width(*)
model No.
width(*)
mount frame
Series
Type
Width
Power supply
controller
Electronic Load
AC power supply
DC power supply
PAD-L
II1
II3
PAD-LA
III
IV
PAT-T
PAN-A
0
I 2 [I3]
II
PAK-A
I
II
III
PAS
I
II
III
PAM
2kw
4kw
PVS
1200
2800
PVD-T
6kw
12kw
PWR
400
800
1600
PAX/PBX
PMC-A/PMC
PMR/PMP
PCR-M
500
1000/2000
PCR-LA
500
1000
2000
4000
6000
PCR-W
2000
4000
8000
12000
PCR-W2
6000
PLZ-4W
I
II
PLZ2004WB
PLZ-U
PLZ-30F
PLZ-50F
PLZ-3WH
I
II
PLZ-W2
I
II
PIA4810/4820
PIA4830
PIA3200
1
BH4
4(*1) BP191A-M
1
BH2
2(*1)
BP191-M
1
KRB5-PAD
5
BP191-M
1 KRB11-PAD
11
BP191-M
1
KRB3-TOS
3
1/4
BP191-M
RMF4
4(*1)
B42
1/2
BP191-M
RMF4
4(*1)
B22
1
BH4
4(*1) BP191A-M
1/6
KRA3
1/3
KRA3
1/2
KRA3
1/6
KRA3
1/3
KRA3
1/2
KRA3
1
KRB3-TOS
3
6
1
KRB6-PAM
1 Supplied as standard(*4)
1
1 Supplied as standard(*4) 2
1 Supplied as standard
3
1 Supplied as standard
6
1/4
KRA3
1/2
KRA3
1
KRB3-TOS
3
1
KRB3
3
1/4
BP191-M
KRA3(*3)
1/3
BP191-M
KRA3(*1)
1/2
KRA3
1
KRB3-TOS
3
1
KRB5
5
1
KRB8
8
1
KRB11
11
1
KRB19
19
1
KRB25(*5)
25
1
KRB8(*2)
8
1
KRB11(*2)
11
1
KRB19(*2)
19
1
KRB25(*5)
25
1
KRB19(*2)
19
1/2
KRA3
1
KRB3-TOS
3
1
KRB3-TOS
3
2/3 KRB3-PLZ-30F
3
1 KRB3-PLZ-50F
3
1/2
KRA3
1
KRB3
3
1/6
BP191-M
RMF4
4(*1)
B24(B11)
1/3
BP191-M
RMF4
4(*1)
B24(B11)
1/3
BP191-M
RMF4
4(*1) B2-PIA4810/4820
KRA3
1/6
BP191-M
KRA3
1/6
BP191-M
RMF4
4(*1)
B4-PIA
KRA3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
* : EIA panel width is 44.45mm (1 3/4 inch). The panel width does not include the rubber feet, *4 : A supporting angle (KRB1-PVS) is needed additionally when stacks multiple number of casters, and levelers.
*1 : Since there are force-aid cooling intake holes in the side or top and bottom of the mainframe, PVS power supplies.
*5 : Model KRB1150 and KRB25 will be the production item upon order.
when mounting in the rack, the blank panel at least 1 panel wide must be installed.
*2 : A support angle specially designed for the racks is supplied.
• When PIA4800 and PIA3200 power supply controller are rank-mounted together with the power
*3 : Since those applied models were designed for the type of "Natural Cooling" unit, so it is required supply, the rank mount frame and rack adaptor are necessary to be added depending on the
series of the connected power supply.
to have countermeasure for enough radiation of the heat when used with rack mounting system.
92
www.kikusui.co.jp
RACK ASSEMBLIES
JIS Standard Rack (Millimeter Size) Mounting Options
Bracket
Blank panel
Rack mount frame
Rack adapter
Bracket necessary when
Product
name
Bracket
Rack
adaptor
Panel
Panel
"M"
is
added
Rack
mount
frame
Panel
fastening mainframe to rack
model No. width(*) for mesh type
model No.
width(*)
model No.
width(*)
mount frame
Series
Type
Width
KRA150
KRA150
KRA150
KRA150
KRA150
KRA150
3
3
3
3
3
3
KRA150
KRA150
3
3
KRA150(*3)
KRA150(*1)
KRA150
3
3
3
KRA150
3
KRA150
3
KRA150
KRA150
KRA150
3
3
3
Power supply
controller
Electronic Load
AC power supply
DC power supply
PAD-L
II1
1
BH4M
4(*1)
BP1H-M
II3
1
BH2M
2(*1)
BP1H-M
PAD-LA
III
1 KRB250-PAD 5
BP1H-M
IV
1 KRB500-PAD 10
BP1H-M
PAT-T
KRB150-TOS
3
PAN-A
0
1/4
BP1H-M
RMF4M
4(*1)
B42
I 2 [I3]
1/2
BP1H-M
RMF4M
4(*1)
B22
II
1
BH4M
4(*1)
BP1H-M
PAK-A
I
1/6
II
1/3
III
1/2
PAS
I
1/6
II
1/3
III
1/2
PAM
2kw
1 KRB150-TOS
3
4kw
1 KRB300-PAM 6
PVS
1200
1 Supplied as standard(*4) 1
2800
1 KRB100-PVS
2
PVD-T
6kw
1 Supplied as standard 3
12kw
1 Supplied as standard 6
PWR
400
1/4
800
1/2
1600
1 KRB150-TOS
3
PAX/PBX 1
KRB150
3
PMC-A/PMC
1/4
BP1H-M
PMR/PMP
1/3
BP1H-M
PCR-M
500
1/2
1000/2000 1 KRB150-TOS 3
PCR-LA
500
1
KRB250
5
1000
1
KRB400
8
2000
1
KRB500
10
4000
1
KRB850
17
6000
1 KRB1150(*5) 23
PCR-W
2000
1 KRB400(*2) 8
4000
1 KRB500(*2) 10
8000
1 KRB850(*2) 17
12000
1 KRB1150(*5) 23
PCR-W2
6000
1 KRB850(*2) 17
PLZ-4W
I
1/2
II
1 KRB150-TOS
3
PLZ2004WB
1 KRB150-TOS
3
PLZ-U
PLZ-30F 2/3 KRB150-PLZ-30F
3
PLZ-50F
1 KRB150-PLZ-50F 3
PLZ-3WH
I
1/2
II
1
KRB3
3
PLZ-W2
I
1/6
BP1H-M
RMF4M
4(*1)
B24(B11)
II
1/3
BP1H-M
RMF4M
4(*1)
B24(B11)
BP1H-M
PIA4810/4820
1/3
RMF4
4(*1) B2-PIA4810/4820
BP1H-M
PIA4830
1/6
BP1H-M
RMF4
PIA3200
1/6
4(*1)
B4-PIA
* : JIS panel width is 50mm. The panel width does not include the rubber feet, casters, and levelers.
*4 : A supporting angle (KRB1-PVS) is needed additionally when stacks multiple number of *1 : Since there are forced-air cooling holes in the side or top and bottom of the mainframe, when *5 : Model KRB1150 and KRB25 will be the production item upon order.
mounting in the rack, the blank panel at least 1 panel width must be installed.
PVS power supplies.
*2 : A support angle specially designed for the racks is supplied.
*3 : Since those applied models were designed for the type of "Natural Cooling" unit, so it is required • When PIA4800 and PIA3200 Power Supply Controller are rack-mounted together with the power
supply, the rack mount frame and rack adaptor are necessary to be added depends on the series
to have countermeasure for enough radiation of the heat when used with rack mounting system.
of the connected power supply.
www.kikusui.co.jp
93
RACK ASSEMBLIES
PWR Series External dimensional diagrams / Rack Mount Option
Unit:mm
■ 400W TYPE (4 units can be rack mounted)
37.75
132.5
Output (Rear) M8
(Front) M6
Input
AC inlet
Accessory power cable
approx. 2.4m long
57
PWR400L/PWR400M/PWR400H
260
460
482
MAX470
400
24.5
149
124
MAX145
KRA3
100
MAX20
106.5
460
260
480
KRA150
■ 800W TYPE (2 units can be rack mounted)
37.75
132.5
Output (Rear) M8
(Front) M6
Input
AC inlet
Accessory power cable
approx. 3m long
57
PWR800L/PWR800M/PWR800H
260
460
482
KRA3
149
24.5
124
MAX155
100
MAX470
400
MAX20
214
MAX20
460
260
480
KRA150
■ 1600W TYPE
PWR1600L/PWR1600M/PWR1600H
KRB3-TOS
MAX470
400
100
460
477.9
KRB150-TOS
94
www.kikusui.co.jp
149
MAX20
24.5
MAX450
428.5
128
MAX150
MAX10
37.5
57
460
477.9
132
Output (Rear) M8
(Front) M6
Input
Terminal M4
Accessory power cable
approx. 3m long
RACK ASSEMBLIES
PAS Series External dimensional diagrams / Rack Mount Option
Unit:mm
■TYPE I
■TYPE II
■TYPE III
PAS10-35/PAS20-18
PAS40-9/PAS60-6
PAS80-4.5/PAS160-2
PAS320-1/PAS500-0.6
PAS10-70/PAS20-36
PAS40-18/PAS60-12
PAS80-9/PAS160-4
PAS320-2/PAS500-1.2
PAS10-105/PAS20-54
PAS40-27/PAS60-18
PAS80-13.5/PAS160-6
PAS320-3/PAS500-1.8
Output M8 bolt
Input
AC inlet
Attached power cable
SVT3 18AWG 3P plug, with connector Cable length 2.4m
MAX160
124
MAX160
124
MAX25
214
MAX25
142.5
MAX150
124
71
Output M8 bolt
Input
AC inlet
Attached power cable
SVT3 18AWG 3P plug, with connector Cable length 2.4m
MAX420
350
MAX20
MAX50
Output M8 bolt
Input
Terminal M4
Attached power cable
VCT3 3.5 mm2 plug, without connector Cable length 3m
■ TYPE I (6 units can be rack mounted)
RackAdapterKRA150
RackAdapterKRA3
BlankPanelKBP3-3
132.5
57
149
100
BlankPanelKBP3-3
BlankPanelKBP3-2
37.75
24.5
BlankPanelKBP3-2
46
0
48
0
46
0
48
2
0
0
26
26
■ TYPE II (3 units can be rack mounted)
RackAdapterKRA150
RackAdapterKRA150
BlankPanelKBP3-2
BlankPanelKBP3-2
BlankPanelKBP3-6
132.5
57
24.5
37.75
149
100
BlankPanel
KBP3-6
46
0
48
2
46
0
48
0
0
0
26
26
■ TYPE III (2 units can be rack mounted)
RackAdapterKRA150
RackAdapterKRA3
BlankPanel
KBP3-2
37.75
24.5
132.5
57
149
100
BlankPanel
KBP3-2
46
0
48
0
0
26
46
0
48
2
0
26
www.kikusui.co.jp
95
RACK ASSEMBLIES
PAK-A Series External dimensional diagrams / Rack Mount Option
■TYPE II
■TYPE III
PAK6-60A✰
PAK20-18A
PAK35-10A
PAK60-6A
PAK6-120A✰
PAK35-20A
PAK60-12A
PAK6-160A✰
PAK35-30A
PAK60-18A
Unit:mm
*Those models indicated with a "✰" are not equipped
with an output terminal on the front panel.
Output (Rear) M6 bolt
(Front) Binding post M6
Input
Terminal M4
Attached power cable
3-wire 18AWG, approx. 2.5m long
MAX60
Output (Rear) M6 bolt
(Front) Binding post M6
Input
Terminal M4
Attached power cable
3-wire 3.5mm 2, approx. 2.5m long
149
ブランクパネルKBP3-3
ブランクパネルKBP3-2
100
124
ラックアダプタKRA150
MAX10
142.5 350±3
MAX10
MAX25
MAX10
71
124
MAX144
MAX144
124
124
MAX134
MAX10
■TYPE I
214
MAX25
214
350
MAX435
Output (Rear) M8 bolt
46
5
(Front) Binding post M6 48
0
Input
Terminal M4
Attached power cable
3-wire 3.5mm 2, approx. 2.5m long
■ TYPE I (6 units can be rack mounted)
RackadaptorKRA150
RackadaptorKRA3
BlankpanelKBP3-2
57
132.5
BlankpanelKBP3-3
37.75
100
BlankpanelKBP3-2
24.5
149
BlankpanelKBP3-3
46
46
0
48
0
0
48
2
0
26
0
26
■ TYPE II (3 units can be rack mounted)
RackadaptorKRA3
132.5
57
BlankpanelKBP3-2
Blankpanel
KBP3-6
37.75
100
BlankpanelKBP3-2
Blankpanel
KBP3-6
24.5
149
RackadaptorKRA150
46
46
0
48
0
0
48
2
60
0
26
2
■ TYPE III (2 units can be rack mounted)
RackadaptorKRA150
RackadaptorKRA3
46
46
0
48
0
0
48
2
0
26
96
www.kikusui.co.jp
57
37.75
132.5
100
Blankpanel
KBP3-2
24.5
149
Blankpanel
KBP3-2
0
26
RACK ASSEMBLIES
PAM Series External dimensional diagrams / Rack Mount Option
Unit:mm
■ 2kW TYPE
PAM40-50/PAM80-25
PAM160-12/PAM320-6
128
MAX150
Auxiliaryoutputterminalcover*
429.5
548
MAX20
MAX665
*PAM40-50doesnothaveauxiliaryoutputterminals.
Bracket
KRB3-TOS
149
100
132
57
Bracket
KRB150-TOS
46
4
48
0
46
0
48
0
■ 4kW TYPE
PAM40-100/PAM80-50
PAM160-25/PAM320-12
262
MAX285
Auxiliaryoutputterminalcover**
429.5
548
MAX20
MAX665
** PAM40-100andPAM80-50donot
haveauxiliaryoutputterminals.
Bracket
KRB300-PAM
50
57
266
76
299
150
57
50
Bracket
KRB6-PAM
46
4
48
0
46
0
48
0
www.kikusui.co.jp
97
RACK ASSEMBLIES
PAT-T Series External dimensional diagrams / Rack Mount Option
Unit:mm
MAX 20
550
PAT20-400T: M12
PAT40-200T : M10
PAT60-133T : M10
Terminal M6
MAX 620
Output
Input
129.2
MAX 155
430
MAX 440
PMC/PMC-A Series External dimensional diagrams / Rack Mount Option
(4 units can be rack mounted)
Unit:mm
■ TYPE II (PMC Series)
■ TYPE I (PMC-A Series)
■ TYPE II (PMC-A Series)
PMC18-2/PMC18-3
PMC35-1/PMC35-2
PMC18-5/PMC35-3
PMC18-1A/PMC18-2A
PMC18-3A/PMC35-0.5A
PMC35-1A/PMC35-2A
PMC18-5A/PMC35-3A
PMC70-1A/PMC110-0.6A
PMC160-0.4A/PMC250-0.25A
PMC350-0.2A/PMC500-0.1A
PMC Series
24.5
132.5
57
37.75
270
[350]
MAX290
[MAX370]
124
MAX134
MAX15
149
100
■ TYPE I (PMC Series)
107
Blank Panel KBP3-4
46
0
48
2
Blank Panel KBP3-2
MAX15
270
[350]
MAX305
[MAX385]
PMC-A Series
Dimensional Drawings [ ] for Type II
Output (Front) Binding post M6
Input
AC inlet
Accessory power cable
approx. 2.5m long
98
www.kikusui.co.jp
0
26
Blank Panel KBP3-4
Rack adaptor KRA3
46
0
48
0
Blank Panel KBP3-2
0
26
Rack adaptor KRA150
RACK ASSEMBLIES
PMP Series External dimensional diagrams / Rack Mount Option
(3 units can be rack mounted)
Unit:mm
PMP18-3TR
PMP25-2TR
PMP16-1QU
Output (Front) Binding post M6
Input
AC inlet
Accessory power cable
approx. 2.5m long
-!8
-!8
-!8
-!8
Blank panel KBP3-3
Blank panel KBP3-3
Rack Adaptor KRA3
Rack Adaptor KRA150
PMR Series External dimensional diagrams / Rack Mount Option
(3 units can be rack mounted)
Unit:mm
PMR18-2.5DU/PMR35-1.2DU
PMR18-1.3TR/PMR25-1TR
PMR24-1QU
142.5
MAX380
350
124
Output (Front) Binding post M6
Input
AC inlet
Accessory power cable
approx. 2.5m long
24.5
37.75
132.5
57
149
100
MAX25
124
MAX160
MAX20
46
0
48
2
BlankpanelKBP3-3
0
26
RackadaptorKRA3
46
0
48
0
BlankpanelKBP3-3
0
26
RackadaptorKRA150
www.kikusui.co.jp
99
RACK ASSEMBLIES
PVS Series External dimensional diagrams / Rack Mount Option
Unit:mm
Model
TYPE
Dimensions(Max):W✕H✕Dmm*
Input terminal
Output terminal
Input power cable [standard]
PVS7.5-140
1200W TYPE 429(483) ✕43.4✕ 444(625)
three-terminal wire clamping connector
Steel bus bar 3✕12AWG,Approx.3m
PVS12-100
1200W TYPE 429(483) ✕43.4✕ 444(625)
three-terminal wire clamping connector
Steel bus bar 3✕12AWG,Approx.3m
PVS20-60
1200W TYPE 429(483) ✕43.4✕ 444(625)
three-terminal wire clamping connector
Steel bus bar 3✕12AWG,Approx.3m
PVS40-30
1200W TYPE 429(483) ✕43.4✕ 444(625)
three-terminal wire clamping connector
Steel bus bar 3✕12AWG,Approx.3m
PVS60-20
1200W TYPE 429(483) ✕43.4✕ 444(625)
three-terminal wire clamping connector
Four-terminal wire clamping connector
3✕12AWG,Approx.3m
PVS100-12
1200W TYPE 429(483) ✕43.4✕ 444(625)
three-terminal wire clamping connector
Four-terminal wire clamping connector
3✕12AWG,Approx.3m
PVS150-8
1200W TYPE 429(483) ✕43.4✕ 444(625)
three-terminal wire clamping connector
Four-terminal wire clamping connector
3✕12AWG,Approx.3m
PVS300-4
1200W TYPE 429(483) ✕43.4✕ 444(625)
three-terminal wire clamping connector
Four-terminal wire clamping connector
3✕12AWG,Approx.3m
PVS600-2
1200W TYPE 429(483) ✕43.4✕ 444(625)
three-terminal wire clamping connector
Four-terminal wire clamping connector
3✕12AWG,Approx.3m
PVS7.5-300
2800W TYPE 431.8(483) ✕87.63✕444(625)
three-terminal wire clamping connector
Steel bus bar 3✕12AWG,Approx.3m
PVS12-220
2800W TYPE 431.8(483) ✕87.63✕444(625)
three-terminal wire clamping connector
Steel bus bar 3✕12AWG,Approx.3m
PVS20-130
2800W TYPE 431.8(483) ✕87.63✕444(625)
three-terminal wire clamping connector
Steel bus bar 3✕12AWG,Approx.3m
PVS40-70
2800W TYPE 431.8(483) ✕87.63✕444(625)
three-terminal wire clamping connector
Steel bus bar 3✕12AWG,Approx.3m
PVS60-46
2800W TYPE 431.8(483) ✕87.63✕444(625)
three-terminal wire clamping connector
Steel bus bar 3✕12AWG,Approx.3m
PVS100-28
2800W TYPE 431.8(483) ✕87.63✕444(625)
three-terminal wire clamping connector
Steel bus bar 3✕12AWG,Approx.3m
PVS150-18
2800W TYPE 431.8(483) ✕87.63✕444(625)
three-terminal wire clamping connector
Four-terminal wire clamping connector
3✕12AWG,Approx.3m
PVS300-9
2800W TYPE 431.8(483) ✕87.63✕444(625)
three-terminal wire clamping connector
Four-terminal wire clamping connector
3✕12AWG,Approx.3m
PVS600-4
2800W TYPE 431.8(483) ✕87.63✕444(625)
three-terminal wire clamping connector
Four-terminal wire clamping connector
3✕12AWG,Approx.3m
* Values in parentheses indicate the maximum dimensions including protrusions such as brackets. Standard bracket for the inch size.
444
MAX30
463.8
R3.2-6.4×11.4
43.4
31.7
■ 1200W TYPE
MAX625
43.4
31.7
483
46
3.
48 8
2.6
Standardbracketforbothinchandmetricsize
87.63
76.2
■ 2800W TYPE
431.8
MAX30
444
463.8
MAX625
99
50
76.2
87.63
483
46
45
3.8
48
0.3
Bracketsuppliedasstandard
100
www.kikusui.co.jp
9.3
48
3
BracketKRB100-PVS
RACK ASSEMBLIES
PVD-T Series External dimensional diagrams / Rack Mount Option
Unit:mm
Model
TYPE
Dimensions(Max):W✕H✕Dmm*
Input terminal
Output terminal
Input power cable [standard]
PVD10-600T
6kW TYPE 483 ✕ 133 ✕ 462(650)
The terminals with the type of tighten screws
M8
10,3m
PVD20-300T
6kW TYPE 483 ✕ 133 ✕ 462(650)
The terminals with the type of tighten screws
M8
10,3m
PVD40-150T
6kW TYPE 483 ✕ 133 ✕ 462(650)
The terminals with the type of tighten screws
M8 10,3m
PVD60-100T
6kW TYPE 483 ✕ 133 ✕ 462(650)
The terminals with the type of tighten screws
M8 10,3m
PVD80-75T
6kW TYPE 483 ✕ 133 ✕ 462(650)
The terminals with the type of tighten screws
M8
10,3m
PVD100-60T
6kW TYPE 483 ✕ 133 ✕ 462(650)
The terminals with the type of tighten screws
The terminals with the type of tighten screws
10,3m
PVD150-40T
6kW TYPE 483 ✕ 133 ✕ 462(650)
The terminals with the type of tighten screws
The terminals with the type of tighten screws
10,3m
PVD300-20T
6kW TYPE 483 ✕ 133 ✕ 462(585)
The terminals with the type of tighten screws
The terminals with the type of tighten screws
10,3m
PVD600-10T
6kW TYPE 483 ✕ 133 ✕ 462(585)
The terminals with the type of tighten screws
The terminals with the type of tighten screws
483 ✕ 263 ✕ 462(615)
The terminals with the type of tighten screws
M8
13.3,3m
PVD10-1200T 12kW TYPE 10,3m
PVD20-600T
12kW TYPE 483 ✕ 263 ✕ 462(615)
The terminals with the type of tighten screws
M8 13.3,3m
PVD40-300T
12kW TYPE 483 ✕ 263 ✕ 462(615)
The terminals with the type of tighten screws
M8
13.3,3m
PVD60-200T
12kW TYPE 483 ✕ 263 ✕ 462(615)
The terminals with the type of tighten screws
M8
13.3,3m
PVD80-150T
12kW TYPE 483 ✕ 263 ✕ 462(615)
The terminals with the type of tighten screws
M8
13.3,3m
PVD100-120T 12kW TYPE 483 ✕ 263 ✕ 462(615)
The terminals with the type of tighten screws
The terminals with the type of tighten screws
13.3,3m
PVD150-80T
12kW TYPE 483 ✕ 263 ✕ 462(615)
The terminals with the type of tighten screws
The terminals with the type of tighten screws
13.3,3m
PVD300-40T
12kW TYPE 483 ✕ 263 ✕ 462(615)
The terminals with the type of tighten screws
The terminals with the type of tighten screws
13.3,3m
PVD600-20T
12kW TYPE 483 ✕ 263 ✕ 462(615)
The terminals with the type of tighten screws
The terminals with the type of tighten screws
13.3,3m
* Values in parentheses indicate the maximum dimensions including protrusions such as brackets. Standard bracket for the inch size.
6
460
483
24.5 50
133
37.5 57
6.4
■ 6kW TYPE
MAX50
462
MAX650*
133
*ThemaximumdepthofPVD300-20TandPVD600-10Tis585mm.
46
0
48
3
Standardbracketforbothinchandmetricsize
55
6
50
35.3 57.15
263
50 50
76.1 57.15
6.4
■ 12kW TYPE
MAX40
462
MAX615
263
460
483
46
0
48
3
Standardbracketforbothinchandmetricsize
www.kikusui.co.jp
101
RACK ASSEMBLIES
PAN-A Series External dimensional diagrams / Rack Mount Option
■ 175W TYPE (TYPE 0)
(4 units can be rack mounted)
PAN16-10A/PAN35-5A
PAN60-3A/PAN70-2.5A
PAN110-1.5A/PAN160-1A
■ 350W TYPE
PAN16-18A/PAN35-10A
PAN60-6A/PAN70-5A
PAN110-3A/PAN160-2A
MAX470
MAX
35
MAXB
[400] 350
[505]
MAX425
*[ ] : TYPE I3
Output (Rear) Terminal M4
(Front) Binding post M6
(auxiliary output terminal)
Input
AC inlet
Attached power cable
SVT3 × 18AWG, approx. 3m long,
with 3P plug
Output (Rear) Terminal M4
(Front) Binding post M8
(auxiliary output terminal)
Input
350W Type:AC inlet
700W Type:Terminal M4
Attached power cable
350W Type:SVT3 × 18AWG, approx. 3 m long,
with 3P plug
700W Type:Nominal sectional area 2.0 SQ. mm, cabtyre cable, with 3P plug, approx. 3m
long(For PAN35-20A: Norminal sectional area 3.5 SQ. mm,cabtyre cable,
approx. 3m long)
Rackmountframe
RMF4M
24.5
24.5
46
0
0
48
BracketB42
BracketB22
160
177
46
5
5
48
2
BracketB42
www.kikusui.co.jp
21.5
37.5
102
102
37.5
46
48
102
Rackmountframe
RMF4
Rackmountframe
RMF4
BlankpanelBP4
BracketBH4M
0
BlankpanelBP2
BlankpanelBP4
BlankpanelBP2
50
199
50
50 50
50
199
50
50
199
50
50
24.5
5
48
0
177
Note:There is no auxiliary output terminal, on the front panel
of Model PAN16-50A.
46
5
48
2
46
2
48
2
BlankpanelBP2
BracketB22
MAXC
Output (Rear) Terminal M4 (M5 for PAN16-50A)
(Front) Binding post M8
(auxiliary output terminal)
Input
Terminal M4
Attached power cable
Nominal sectional area 3.5 SQ. mm, cabtyre cable, without plug, approx. 3 m long)
Rackmountframe
RMF4M
46
BlankpanelBP2
102
400
MODEL
MAXA MAXB MAXC
PAN16-50A
40
500
60
PAN35-30A
PAN60-20A
PAN70-15A
PAN110-10A
45
505
60
PAN160-7A
PAN250-4.5A
PAN350-3.5A
PAN600-2A
140
MAX160
MAX20
MAX
45
MAXA
160
MAX175
MAX235 210
Unit:mm
PAN16-50A/PAN35-30A
PAN60-20A/PAN70-15A
PAN110-10A/PAN160-7A
PAN250-4.5A/PAN350-3.5A
PAN600-2A
430
MAX10
MAX115
■ 700W TYPE
PAN16-30A/PAN35-20A
PAN60-10A/PAN70-8A
PAN110-5A/PAN160-3.5A
PAN250-2.5A
■ 1000W TYPE (TYPE II)
400
MAX175
140
106
■ 350W TYPE (TYPE I2)/
700W TYPE (TYPE I3)
(2 units can be rack mounted)
BracketBH4
RACK ASSEMBLIES
PAD-L/LP Series External dimensional diagrams / Rack Mount Option
*Mounting precaution
Since there are forced-air cooling intake holes in the mainframe, when mounting it in the rack, the blank panel at least 1 panel width must be installed.
Unit:mm
■ TYPE V (V2)
■ TYPE V
PAD35-200L/PAD35-200LT
PAD60-120L/PAD110-60L
■ TYPE V2
PAD35-300LPT/PAD60-200LPT
42
*[]:TYPEV2
42
840
MAX935
430
MAX612
[MAX739]
584
[684]
500
[600]
Output Terminal M12 bolt
Input
Terminal M8
(3-phase type: M6)
Accessory power cable
3-wire 14mm 2 , approx. 4m long
(3-phase type: 4-wire 14mm 2, 4m*)
*35-200LT: 4-wire 8mm 2 4m
*PAD110-60L:OutputTerminal M6 bolt
Input Terminal M6
PAD-LA Series External dimensional diagrams / Rack Mount Option
■ TYPE III
■ TYPE IV
PAD16-100LA/PAD36-60LA
PAD60-35LA/AD72-30LA
PAD110-20LA/PAD250-8LA
PAD36-100LA/PAD60-60LA
PAD110-32LA/PAD250-15LA
MAX625
549
37.5
45
8.8
8.8
47
BracketKRB11-PAD
24.5
46
1.5
48
1.5
24.5
BracketKRB5-PAD
150
249
200 24.5
4
48 61.5
0.8
488
150
133
100
488
146
221
37.5 133.5
50
121
218
MAX275
MAX40
MAX520
465
MAX40
484.6
MAX575
MAX440
430
MAX440
430
45
9.
47 5
9.5
BracketKRB500-PAD
BracketKRB250-PAD
www.kikusui.co.jp
103
RACK ASSEMBLIES
PAX and PBX Series External dimensional diagrams / Rack Mount Option
Unit:mm
MAX450
430
BracketKRB3
132
BracketKRB150
46
46
0
48
50
0
MAX15
24.5
37.75
2
149
48
132.5
(Rear)TerminalM4
(PAX35-30:BarterminalM6)
(Front)BindingpostM6(auxiliaryoutputterminal)
Input
TerminalM4
Attachedwithinputpowercable
57
0
Output
MAX15
■TYPEI
PAX35-10
PBX20-5
PBX40-2.5
■TYPEII
PAX35-20
PAX35-30
PBX20-10
PBX20-20
PBX40-5
PBX40-10
450[550] *[]:TYPEII
MAX45
PCR-M Series External dimensional diagrams / Rack Mount Option
Unit:mm
■ PCR500M (2 units can be rack mounted)
Output (Front) Outlet
(Rear) Terminal M4
Input
Terminal M4
Accessory power cable
approx. 2.4m long
149
100
132.5
57
MAX25
MAX20
24.5
37.75
124
MAX150
214
350
MAX395
(465
)
482
(460
)
480
RackadaptorKRA3
RackadaptorKRA150
■ PCR1000M/PCR2000M(Example：PCR1000M)
350
MAX 400
MAX 30
Output (Front) Outlet
(Rear) Terminal M4
Input
Terminal M4
Accessory power cable
approx. 3m long
Bracket KRB150-TOS
24.5
MAX 15
128
MAX 150
37.75
MAX 450
429
132
57
149
100
Bracket KRB3-TOS
(465)
MAX 20
478
104
www.kikusui.co.jp
(460)
478
RACK ASSEMBLIES
PCR-LA and PCR-W/W2 Series External dimensional diagrams / Rack Mount Option
550
MA X40
MA X605
Unit:mm
Input power cable [standard accessory]
Exclusive designed cable , 2 mm2/3 m with a threepronged plug
Three-core heavy PVC jacketed cable , 5.5 mm2/3 m
Single-core , 8 mm2/3 m
Single-core , 22 mm2/3 m
Single-core , 22 mm2/3 m
Single-core , 5.5mm2 , approx. 3m
Single-core , 14mm2 , approx. 3m
Single-core , 14mm2 , approx. 3m
Single-core , 22mm2 , approx. 3m
Single-core , 14mm2 , approx. 5m
Single-core , 22mm2 , approx. 5m
Output terminal
M4
M6
M6
M6
M6
M6
M6
M6
M8
M6 · M6
M8 · M6
MA X40
550
Input terminal
(Inlet)
M6
M6
M6
M6
M6
M6
M6
M8
M6
M8
MA X595
Dimensions(Max):W✕H✕Dmm
430(455) ✕ 217(245) ✕ 550(595)
430(455) ✕ 351(415) ✕ 550(595)
430(455) ✕ 484(545) ✕ 550(595)
430(455) ✕ 839(920) ✕ 550(605)
430(455) ✕ 1105(1190) ✕ 550(605)
430(450) ✕ 351(415) ✕ 550(595)
430(450) ✕ 484(545) ✕ 550(595)
430(450) ✕ 839(920) ✕ 550(595)
430(450) ✕ 1105(1190) ✕ 550(595)
430(450) ✕ 839(920) ✕ 550(595)
430(450) ✕ 1238(1320) ✕ 550(595)
PCR500LA/1000LA/2000LA
PCR-W/W2 Series
PCR4000LA/6000LA
-!8
-!8
-!8
-!8
-!8
-!8
0#2,!
0#27
0#2,!
0#277
0#2,!
0#27
0#27
0#2,!
0#27
0#2,!
-!8
-!8
-!8
-!8
-!8
0#2,!
"RACKET
+2"
"RACKET
+2"
"RACKET
+2"
"RACKET
+2"
"RACKET
+2"
"RACKET
+2"
0#2,!
0#277
"RACKET
+2"
0#2,!
0#27
"RACKET
+2"
0#2,!
0#27
Model
PCR500LA
PCR1000LA
PCR2000LA
PCR4000LA
PCR6000LA
PCR2000W
PCR4000W
PCR8000W
PCR12000W
PCR6000W2
PCR12000W2
-!8
www.kikusui.co.jp
105
RACK ASSEMBLIES
PLZ-U Series External dimensional diagrams / Rack Mount Option
Unit:mm
MAX315
MAX46 0
MAX10
MAX 470
43 5
40 0
128
KRB150 -PLZ-30F
24 .5
10 0
(460
)
48 0
37. 5
57
(465)
48 2
132
KRB3-PLZ-30F
KRB150 -PLZ-50F
37. 5
57
132
KRB3-PLZ-50F
（46
5）
484.
4
DC input terminals
(Rear) M6
(Front) M6
Input
AC inlet
Attached power cable
SVT3 18AWG 3P plug,
Cable length 2.4m
106
www.kikusui.co.jp
149
MAX15 0
128
MAX15 0
MAX 20
（46
5）
484.
4
10 0
149
292
24 .5
MAX10
RACK ASSEMBLIES
PLZ-3WH and PLZ-4W Series External dimensional diagrams / Rack Mount Option
Unit:mm
■ TYPE I (PLZ-3WH Series)
(2 units can be rack mounted)
■ TYPE II (PLZ-3WH Series)
PLZ603WH / PLZ1003WH
PLZ153WH / PLZ303WH
MAX10
MAX
35
MAX
15
MAX450
MAX
45
400
400
430
MAX
45
MAX
25
MAX
20
128
124
214
DC input terminals
(Rear) M6
(Front) M6
Input
AC inlet
Provided with a power cable with three-pronged power plug
DC input terminals
(Rear) M8
AC inlet
Input
Provided with a power cable with three-pronged power plug
■ TYPE I (PLZ-4W Series)
(2 units can be rack mounted)
■ TYPE II (PLZ-4W Series)
*The length for Model PLZ2004WB is 550(600)mm
PLZ1004W/PLZ664WA
PLZ164W/PLZ334W/PLZ164WA
MAX11
MAX
30
MAX455
MAX
40
400
MAX
30
429.5
MAX
40
400
MAX
22
MAX
20
128
124
214.5
DC input terminals
(Rear) M8
(Front) M6
DC input terminals
(Rear) M8
(Front) M6
Input
AC inlet
PLZ2004WB
DC input terminals
(Rear) M12
AC inlet
Input
132.5
57
■ TYPE II (PLZ-3WH Series)
37.75
■ TYPE I (PLZ-3WH and PLZ-4W Series)
RackmountbracketKRB3
46
0
260
48
2
430
46
57
2
132.5
57
37.75
132.5
0
48
RackadapterKRA3
37.75
RackmountbracketKRB150
4
48
48
2
430
24.5
260
■ TYPE II (PLZ-4W Series)
46
57
2
RackadapterKRA3
0
RackmountbracketKRB3-TOS
RackmountbracketKRB150
46
0
48
24.5
0
50
149
100
465
479
57
RackadapterKRA150
260
430
465
479
RackadapterKRA150
100
0
0
24.5
46
149
RackmountbracketKRB150-TOS
48
37.75
43
24.5
260
132
0
48
0
37.5
46
132.5
0
48
149
24.5
0
50
0
46
149
149
100
60
RackmountbracketKRB3
* The front panel for Model PLZ2004WB is designed differently,
but external size is the same
www.kikusui.co.jp
107
RACK ASSEMBLIES
PLZ-W2 Series External dimensional diagrams / Rack Mount Option
Unit:mm
Mounting precaution : Since there are forced-air cooling intake holes in the mainframe, when mounting in the rack, the blank panel at least one panel width must be installed.
MAX25
298
MAX22
138
MAX145
DC input terminals
(Rear) Terminal M3
(Front) Binding post M6
Input
AC cable
MAX10
MAX10
MAX75
348
140
140
MAX155
65
■ PLZ152W (3 units can be rack mounted)
MAX15
■ PLZ72W (6 units can be rack mounted)
MAX30
MAX27
DC input terminals
(Rear) Terminal M5
(Front) Binding post M8
Input
AC cable
Rackmountframe
RMF4M
177
102
50
37.5
24.5
50
199
50
Rackmountframe
RMF4
46
46
5
5
48
48
0
BlankpanelBP2
2
BlankpanelBP2
BlankpanelBP6
BlankpanelBP6
BracketB24
BracketB24
Rackmountframe
RMF4M
177
37.5
102
50
24.5
50
199
50
Rackmountframe
RMF4
46
46
5
5
48
48
0
BlankpanelBP2
BlankpanelBP2
BlankpanelBP6
BracketB24
108
www.kikusui.co.jp
2
BlankpanelBP6
BracketB24
●Distributor/Representative
1-877-876-2807 www.kikusuiamerica.com
1633 Bayshore Highway, Suite 331, Burlingame, CA 94010
Phone : 650-259-5900 Facsimile : 650-259-5904
www.kikusui.cn
Room, D-01,11F, Majesty Bld, No.138, Pudong Ave, Shanghai City
Phone : 021-5887-9067 Facsimile : 021-5887-9069
Printed in Japan
■ All products contained in this catalogue are equipment and devices that are premised on use under the supervision
of qualified personnel, and are not designed or produced for home-use or use by general consumers. ■ Specifications,
design and so forth are subject to change without prior notice to improve the quality. ■ Product names and prices are
subject to change and production may be discontinued when necessary. ■ Product names, company names and
brand names contained in this catalogue represent the respective registered trade name or trade mark. ■ Colors,
textures and so forth of photographs shown in this catalogue may differ from actual products due to a limited fidelity
in printing. ■ Although every effort has been made to provide the information as accurate as possible for this catalogue,
certain details have unavoidably been omitted due to limitations in space. ■ If you find any misprints or errors in this
catalogue, it would be appreciated if you would inform us. ■ Please contact our distributors to confirm specifications,
price, accessories or anything that may be unclear when placing an order or concluding a purchasing agreement.
Issue:Jun.2009 20090610KCMEC11a