Email your comments to: BSUKoperations.review@bsigroup.com
Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS identifier
BS_Title
Committee
Status
BS 1054:1975
Specification for engineers' comparators for
external measurement
TDW/4
confirmed (2010)
BS 10999:2010
Specification for distress signal units for the
fire and rescue service
Collaborative business relationships -- A
framework specification
Assessment of surface texture. Guidance and
general information
Natural rubber compounds. Specification
Specification for baths made from porcelain
enamelled cast iron
PH/4
current
SVS/1/4
current
TDW/4
current
PRI/54
B/503
BS 131-1:1961
Notched bar tests -- The Izod impact test of
metals
ISE/101
confirmed (2008)
partially replaced
by BS EN
232:2003
confirmed (2007)
BS 131-4:1972
Notched bar tests -- Calibration of pendulum
impact testing machines for metals
ISE/101
BS 131-5:1965
Notched bar tests -- Determination of
crystallinity
Notched bar tests -- Method for precision
determination of Charpy V-notch impact
energies for metals
Notched bar tests -- Specification for
verification of the test machine used for
precision determination of Charpy V-notch
impact energies for metals
ISE/101
partially replaced
by BS EN 100452:1993
confirmed (2007)
ISE/101
confirmed (2010)
ISE/101
confirmed (2010)
BS 1347:1986
Specification for architects', engineers' and
surveyors' metric scale rules
TDW/4
confirmed (2010)
BS 1377-1:1990
Methods of test for soils for civil engineering
purposes -- General requirements and
sample preparation
B/526/3
confirmed (2010)
BS 1377-3:1990
Methods of test for soils for civil engineering
purposes -- Chemical and electro-chemical
tests
Methods of test for soils for civil engineering
purposes -- Compaction-related tests
B/526/3
confirmed (2010)
B/526/3
confirmed (2010)
BS 1377-5:1990
Methods of test for soils for civil engineering
purposes -- Compressibility, permeability and
durability tests
B/526/3
confirmed (2010)
BS 1377-6:1990
Methods of test for soils for civil engineering
purposes -- Consolidation and permeability
tests in hydraulic cells and with pore pressure
measurement
B/526/3
confirmed (2010)
BS 1377-7:1990
Methods of test for soils for civil engineering
purposes -- Shear strength tests (total stress)
B/526/3
confirmed (2010)
BS 1377-8:1990
Methods of test for soils for civil engineering
purposes -- Shear strength tests (effective
stress)
Specification for baths made from vitreous
enamelled sheet steel
Specification for high carbon bright steel
(silver steel)
B/526/3
confirmed (2010)
B/503
confirmed (2010)
ISE/105
confirmed (2010)
BS 11000-1:2010
BS 1134:2010
BS 1154:2003
BS 1189:1986
BS 131-6:1998
BS 131-7:1998
BS 1377-4:1990
BS 1390:1990
BS 1407:1970
January 2015
Final Review
Outcome
Page 1 of 20
Email your comments to: BSUKoperations.review@bsigroup.com
Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS 1428-D4:1963
Microchemical apparatus. Volumetric analysis
-- Specification for capillary pipettes
LBI/1/2
confirmed (2010)
BS 1449-1.1:1991
Steel plate, sheet and strip. Carbon and
carbon-manganese plate, sheet and strip -General specification
ISE/109
confirmed (2010)
BS 1449-1.14:1991
Steel plate, sheet and strip. Carbon and
carbon-manganese plate, sheet and strip -Specification for hot rolled narrow strip
supplied in a range of conditions for heat
treatment and general engineering purposes
ISE/109
confirmed (2010)
BS 1449-1.8:1991
Steel plate, sheet and strip. Carbon and
carbon-manganese plate, sheet and strip -Specification for hot rolled narrow strip based
on formability
Specification for waterproof building papers
ISE/109
confirmed (2010)
B/546
current
BS 1635:1990
Recommendations for graphic symbols and
abbreviations for fire protection drawings
FSH/14
current
BS 1726-1:2010
Cylindrical helical springs made from round
wire and bar. Guide to methods of specifying
and tolerancing hot coiled springs, and cold
coiled springs not covered by BS EN 15800,
and general spring testing -- Compression
springs
Specification for couplings for suction and
delivery hose (1$9H in. to 8 in. nominal
sizes) other than fire hose couplings
FME/9/3
current
PRI/66
obsolescent
(2012)
BS 18477:2010
Inclusive service provision. Requirements for
identifying and responding to consumer
vulnerability
SVS/0
current
BS 1906:1952
Specification for hose couplings (air and
water) ($9B in. to 1$9D in. nominal sizes)
PRI/66
obsolescent
(2012)
BS 2000-0-1:1999
Methods of test for petroleum and its
products. General introduction -- Section 0.1:
Specifications - IP standard for thermometers
PTI/13
confirmed (2010)
BS 2000-0-2:1996
Methods of test for petroleum and its
products. General introduction -Specifications for IP standard reference
liquids
Methods of test for petroleum and its
products. General introduction -- Barometric
pressure corrections
Methods of test for petroleum and its
products -- Determination of acidity,
neutralization value. Colour indicator titration
method
Methods of test for petroleum and its
products -- Determination of sulfur. Lamp
combustion method
Methods of test for petroleum and its
products -- Determination of specific energy
PTI/13
confirmed (2010)
PTI/13
confirmed (2010)
PTI/13
confirmed (2010)
PTI/13
confirmed (2010)
PTI/13
confirmed (2010)
Methods of test for petroleum and its
products -- Determination of drop melting
point of wax and petrolatum
PTI/13
confirmed (2010)
BS 1521:1972
BS 1782:1951
BS 2000-0-4:1996
BS 2000-1:1995
BS 2000-107:1993
BS 2000-12:1993
BS 2000-133:1993
January 2015
Page 2 of 20
Email your comments to: BSUKoperations.review@bsigroup.com
Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS 2000-137:1993
Methods of test for petroleum and its
products -- Determination of oil content of
water mix metalworking oil dilutions
PTI/13
confirmed (2010)
BS 2000-142:1993
Methods of test for petroleum and its
products -- Determination of oxidation
stability of lubricating grease. Oxygen bomb
method
Methods of test for petroleum and its
products -- Determination of cone
penetration of petrolatum
Methods of test for petroleum and its
products -- Determination of distillation
characteristics of volatile organic liquids
PTI/13
confirmed (2010)
PTI/13
confirmed (2010)
PTI/13
confirmed (2010)
Methods of test for petroleum and its
products -- Determination of neutralization
value of bitumen. Colour indicator titration
method
Methods of test for petroleum and its
products -- Determination of ash of
petroleum products containing mineral
matter
Methods of test for petroleum and its
products -- Determination of mercaptan
sulfur and hydrogen sulfide content of
liquefied petroleum gases (LPG).
Electrometric titration method
Methods of test for petroleum and its
products -- Determination of air release of
lubricating and hydraulic oils
PTI/13
confirmed (2010)
PTI/13
confirmed (2010)
PTI/13
confirmed (2010)
PTI/13
confirmed (2010)
BS 2000-317:1995
Methods of test for petroleum and its
products -- Determination of residues in
liquefied petroleum gases. Low temperature
evaporation method
PTI/13
confirmed (2010)
BS 2000-346:1996
Methods of test for petroleum and its
products -- Determination of polycyclic
aromatics in unused lubricating base oils and
asphaltene free petroleum fractions.
Dimethyl sulphoxide extraction refractive
index method
Methods of test for petroleum and its
products -- Determination of open flash and
fire point. Pensky-Martens method
PTI/13
confirmed (2010)
PTI/13
confirmed (2010)
BS 2000-450:2000
Methods of test for petroleum and its
products -- Diesel fuel. Assessment of
lubricity using the high-frequency
reciprocating rig (HFRR). Test method
PTI/13
confirmed (2010)
BS 2000-454:2000
Methods of test for petroleum and its
products -- Determination of phosphorus in
gasoline. Spectrophotometric method
PTI/13
confirmed (2010)
BS 2000-456:2000
Methods of test for petroleum and its
products -- Determination of potassium in
gasoline. Atomic absorption spectrometry
(AAS) method
PTI/13
confirmed (2010)
BS 2000-179:1993
BS 2000-195:1998
BS 2000-213:1993
BS 2000-223:1993
BS 2000-272:2000
BS 2000-313:2001
BS 2000-35:1993
January 2015
Page 3 of 20
Email your comments to: BSUKoperations.review@bsigroup.com
Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS 2000-50:1993
Methods of test for petroleum and its
products -- Determination of cone
penetration of lubricating grease
PTI/13
confirmed (2010)
BS 2000-61:1999
Methods of test for petroleum and its
products -- Determination of sulfur. High
pressure combustion method
PTI/13
confirmed (2010)
BS 2000-76:1993
Methods of test for petroleum and its
products -- Determination of congealing point
of waxes and petrolatum
PTI/13
confirmed (2010)
BS 2457:1975
Specification for protractors for drawing
office use
Specification for set squares (fixed and
adjustable) for drawing office use
TDW/4
confirmed (2010)
TDW/4
confirmed (2010)
BS 2464:1954
Specification for hose couplings for petrol, oil
and lubricants ($9L in. to 4 in. nominal sizes)
PRI/66
obsolescent
(2012)
BS 2543:2004
Upholstery fabrics for end use applications.
Classification
Roughness comparison specimens -Specification for turned, ground, bored,
milled, shaped and planed specimens
TCI/66
confirmed (2010)
TDW/4/9
current
BS 2634-2:2010
Roughness comparison specimens -Specification for spark-eroded, shot-blasted,
grit-blasted and polished specimens
TDW/4/9
current
BS 27383:2004+A1:2008
Spectacle lenses -- Specification for the
presentation of prescriptions and prescription
orders for ophthalmic lenses
CH/172/3
confirmed (2010)
BS 2752:2003
Chloroprene rubber compounds. Specification
PRI/54
confirmed (2008)
BS 2772-2:1989
Colliery haulage and winding equipment. -Specification for wrought steel
ISE/105
confirmed (2010)
BS 2782-7:Method
720B:1979
Methods of testing plastics. Rheological
properties -- Cup flow of phenolic and alkyd
moulding materials
PRI/21
confirmed (2010)
BS 2952:1958
Specification for rubber hose for i.c. engine
cooling systems
Sampling and analysis of glass-making sands
-- Methods for sampling and physical testing
of glass-making sands
PRI/66
LBI/1/2
obsolescent
(2012)
confirmed (2010)
Transliteration of Cyrillic and Greek
characters
Specification for pan and 100$0D
countersunk slotted head screws with ISO
metric screw threads
Procedure for inspection, testing and
acceptance of iron, nickel, copper, cobalt and
refractory metal base alloy castings
IDT/2
confirmed (2010)
ACE/12
current
ACE/61
current
Specification for nickel-cobalt-chromiummolybdenum-titanium-aluminium heatresisting alloy billets, bars, forgings and parts
(nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al
0.5)
ACE/61/-/48
current
BS 2459:1974
BS 2634-1:2010
BS 2975-1:2004
BS 2979:1958
BS 2A 260-2A
265:2010
BS 2HC 100:2010
BS 2HR 10:2010
January 2015
Page 4 of 20
Email your comments to: BSUKoperations.review@bsigroup.com
Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS 2HR 3:2010
Specification for nickel-cobalt-chromiummolybdenum-aluminium-titanium heatresisting alloy billets, bars, forgings and parts
(nickel base, Co 20, Cr 14.8, Mo 5, Al 4.8, Ti
1.2)
Specification for nickel-chromium-cobaltaluminium-molybdenum-titanium heatresisting alloy billets, bars, forgings and parts
(nickel base, Cr 15, Co 14.2, Al 5, Mo 4, Ti 4)
ACE/61/-/48
current
ACE/61/-/48
current
BS 2HR 40:2010
Specification for cobalt-chromium-tungstennickel-manganese heat-resisting alloy billets,
bars and forgings (cobalt base Cr 20, W 15,
Ni 10, Mn 1.5)
ACE/61/-/48
current
BS 2HR 5:2010
Specification for nickel-chromium-titanium
heat-resisting alloy billets, bars, forgings and
parts (nickel base, Cr 19.5, Ti 0.4)
ACE/61/-/48
current
BS 2HR 505:2010
Specification for nickel-chromium-irontitanium-niobium-aluminium heat-resisting
alloy round wire with a maximum diameter of
2 mm for thread inserts (nickel base Cr 15.5,
Fe 7.0, Ti 2.5, Nb/Ta 0.95, Al 0.70)
ACE/61/-/48
current
BS 2HR 506:2010
Specification for nickel-chromium-cobalttitanium-aluminium heat-resisting alloy wire:
softened (nickel base, Cr 19.5, Co 1.8, Ti 2.5,
Al 1.5)
ACE/61/-/48
current
BS 2HR 51:2010
Specification for high expansion heatresisting steel billets, bars, forgings and parts
(Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7,
V 0.3) (Solution treated at 980 $0DC)
ACE/61/-/48
current
BS 2HR 52:2010
Specification for heat-resisting steel billets,
bars, forgings and parts (Ni 25.5, Cr 14.7, Ti
1.8, Mn 1.5, Mo 1.2, V 0.3)
ACE/61/-/48
current
BS 2HR 53:2010
Specification for nickel-iron-chromiummolybdenum-titanium heat-resisting alloy
billets, bars, forgings and parts (Ni/Co 42.5,
Cr 12.5, Mo 5.8, Ti 3.0, Fe remainder)
ACE/61/-/48
current
BS 2HR 55:2010
Specification for nickel-iron-chromiummolybdenum-aluminium-titanium heatresisting alloy billets, bars, forgings and parts
(Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2,
Fe remainder)
ACE/61/-/48
current
BS 2HR 6:2010
Specification for nickel-chromium- ironmolybdenum-cobalt-tungsten heat-resisting
alloy billets, bars, forgings and parts (nickel
base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)
ACE/61/-/48
current
BS 31:1940
Specification. Steel conduit and fittings for
electrical wiring
Butyl rubber compounds (including halobutyl
compounds). Specification
PEL/213
PRI/54
obsolescent
(2011)
confirmed (2008)
Specification for fire hose couplings and
ancillary equipment
FSH/17/8
current
BS 2HR 4:2010
BS 3227:2003
BS 336:2010
January 2015
Page 5 of 20
Email your comments to: BSUKoperations.review@bsigroup.com
Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS 3402:1969
Specification for quality of vitreous china
sanitary appliances
Specification for stands for drawing boards
B/503
confirmed (2010)
TDW/4
confirmed (2010)
BS 350:2004
BS 3505:1986
Conversion factors for units
Specification for unplasticized polyvinyl
chloride (PVC-U) pressure pipes for cold
potable water
SS/7
PRI/88
BS 3509:1962
BS 3518-1:1993
Specification for spirit level vials
Methods of fatigue testing -- Methods of
fatigue testing. Guide to general principles
TDW/4
ISE/101
confirmed (2010)
replaced by BS EN
1452-1:1999, BS
EN 1452-2:1999,
BS EN 14523:1999, BS EN
1452-4:1999 and
BS EN 14525:1999
confirmed (2010)
confirmed (2009)
BS 3518-3:1963
Methods of fatigue testing -- Direct stress
fatigue tests
Methods of test for paints -- Index of test
methods
Tree work. Recommendations
Specification for cotton webbing suitable for
aerospace purposes (warp yarn nominally R
310 tex)
Specification for nickel-chromium-titaniumaluminium heat-resisting alloy billets, bars,
forgings and parts (nickel base, Cr 19.5, Ti
2.2, Al 1.4)
ISE/101
confirmed (2009)
STI/10
current
B/213
ACE/65
current
current
ACE/61/-/48
current
BS 41:1973
Specification for cast iron spigot and socket
flue or smoke pipes and fittings
B/506
confirmed (2010)
BS 4177:1992
BS 4268:1967
Specification for cooker control units
Specification for the marking of wooden
hatchway covers
Transliteration of Arabic characters
Methods of test for resistance to air and
water penetration -- Permeable walling
constructions (water penetration)
PEL/23
SME/32
confirmed (2010)
confirmed (2007)
IDT/2
B/519/1
confirmed (2010)
confirmed (2010)
BS 4345:1968
BS 4358:1968
Specification for slotted angles
Glossary of terms used in air gauging with
notes on the technique
MHE/8
TDW/4
confirmed (2008)
confirmed (2010)
BS 4484-1:1969
Specification for measuring instruments for
constructional works -- Metric graduation and
figuring of instruments for linear
measurement
Specification for railway turnouts for private
users. Turnouts over which British Railways
locomotives operate -- Turnouts using bull
head rails
TDW/4
confirmed (2010)
RAE/2
confirmed (2010)
Specification for railway turnouts for private
users. Turnouts over which British Railways
locomotives operate -- Turnouts using flat
bottom rail
RAE/2
confirmed (2010)
BS 3459:1985
BS 3900-0:2010
BS 3998:2010
BS 3F 128:2010
BS 3HR 1:2010
BS 4280:1968
BS 4315-2:1970
BS 4521-1.1:1971
BS 4521-1.2:1971
January 2015
Page 6 of 20
Email your comments to: BSUKoperations.review@bsigroup.com
Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS 4521-2:1975
Specification for railway turnouts for private
users -- Light grade turnouts over which
British Railways locomotives do not operate,
for axle loads not exceeding 10 tons, using
flat bottom rails
RAE/2
confirmed (2010)
BS 4521-3.1:1974
Specification for railway turnouts for private
users. Medium grade turnouts over which
British Railways locomotives do not operate,
for axle loads not exceeding 25 tons -Turnouts using bull head rail
RAE/2
confirmed (2010)
BS 4521-3.2:1975
Specification for railway turnouts for private
users. Medium grade turnouts over which
British Railways locomotives do not operate,
for axle loads not exceeding 25 tons -Turnouts using flat bottom rails
RAE/2
confirmed (2010)
BS 4521-4:1975
Specification for railway turnouts for private
users -- Heavy grade turnouts over which
British Railways locomotives do not operate,
for axle loads which may exceed 25 tons,
using flat bottom rails
RAE/2
confirmed (2010)
BS 4569:1983
Method of test for ignitability (surface flash)
of pile fabrics and assemblies having pile on
the surface
TCI/66/-/8
confirmed (2008)
BS 46071:1984+A2:2010
Non-metallic conduits and fittings for
electrical installations -- Specification for
fittings and components of insulating
material
Non-metallic conduit fittings for electrical
installations -- Specification for rigid conduits,
fittings and boxes of insulating material
PEL/213
current
PEL/213
current
BS 4680:1996
BS 47-1:1991
Specification for clothes lockers
Fishplates for railway rails -- Specification for
rolled steel fishplates
MHE/8
RAE/2
confirmed (2008)
confirmed (2010)
BS 476-3:2004
Fire tests on building materials and
structures -- Classification and method of test
for external fire exposure to roofs
FSH/22/-/8
current
BS 4766:1989+A1:2009
Fire tests on building materials and
structures -- Method of test for fire
propagation for products
Internal and external wood doorsets, door
leaves and frames -- Specification for
dimensional requirements
FSH/21
current
B/538/2
confirmed (2010)
BS 4811:1972
Specification for the presentation of research
and development reports
IDT/2
confirmed (2010)
BS 4812:1972
Specification for the romanization of
Japanese
Stainless steel tubes and fittings for the food
industry and other hygienic applications -Specification for tubes
IDT/2
confirmed (2010)
ISE/110
partially replaced
by BS EN
10357:2013
Furniture. Strength and stability of furniture - Methods for determination of stability of
non-domestic storage furniture
FW/0/2
confirmed (2010)
BS 46075:1982+A3:2010
BS 4787-1:1980
BS 48251:1991+A2:2009
BS 4875-8:1998
January 2015
Page 7 of 20
Email your comments to: BSUKoperations.review@bsigroup.com
Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS 4894:1993
Specification for bifurcated rivets for general
purpose use (metric series)
FME/9
confirmed (2010)
BS
493:1995+A1:2010
Specification for airbricks and gratings for
wall ventilation
B/519/1
current
BS 4933:2010
Specification for ISO metric black cup and
countersunk head bolts and screws with
hexagon nuts
Repair and allied processes for the
conservation of documents.
Recommendations
General requirements for rotating electrical
machines -- Specification for standard
dimensions
Specification for nickel-chromium-titaniumaluminium heat-resisting alloy bar and wire
(maximum diameter or minor sectional
dimension of 30 mm) for the manufacture of
fasteners (nickel base, Cr 19.5, Ti 2.2, Al 1.4)
FME/9
current
IDT/2/9
confirmed (2008)
PEL/2
current
ACE/61/-/48
current
Aerospace series. Procedure for inspection,
testing and acceptance of steel sheet and
strip
Method for the estimation of equivalent
diameters in the heat treatment of steel
ACE/61
current
ISE/105
confirmed (2010)
Guide to stowage of goods in freight
containers
Specification for dimensions of hydraulic
connectors and adaptors
Specification for aspirated hygrometer
TW/1
confirmed (2008)
MCE/18
confirmed (2010)
LBI/1/2
confirmed (2010)
Framework for colour co-ordination for
building purposes
Colour matching fan
Emergency lighting -- Code of practice for
electrical low mounted way guidance systems
for emergency use
STI/14
confirmed (2010)
STI/14
EL/1/1
confirmed (2010)
confirmed (2010)
BS 5266-4:1999
Emergency lighting -- Code of practice for
design, installation, maintenance and use of
optical fibre systems
EL/1/1
confirmed (2010)
BS 5266-5:1999
Emergency lighting -- Specification for
component parts of optical fibre systems
EL/1/1
confirmed (2010)
BS 5266-6:1999
Emergency lighting -- Code of practice for
non-electrical low mounted way guidance
systems for emergency use.
Photoluminescent systems
Pressure vessel details (dimensions) -Specification for saddle supports for
horizontal cylindrical pressure vessels
EL/1/1
confirmed (2010)
PVE/1
confirmed (2010)
Specification. Performance of a.c. electric
ventilating fans and regulators for nonindustrial use
Continental quilts -- Specification for quilts
containing fillings other than feather and/or
down
Specification. ISO metric trapezoidal screw
threads
CPL/59
confirmed (2010)
TCI/66
current
FME/9
confirmed (2010)
BS 4971:2002
BS 4999141:2004+A1:2010
BS 4HR 601:2010
BS 4S 500:2010
BS 5046:1974
BS 5073:1982
BS 5200:1997
BS 5248:1990
BS 5252:1976
BS 5252F:1976
BS 5266-2:1998
BS 5276-2:2003
BS 5285:1975
BS 53351:1991+A2:2010
BS 5346:1976
January 2015
Page 8 of 20
Email your comments to: BSUKoperations.review@bsigroup.com
Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS 5380:1984
Specification for hydraulic port and stud
coupling using 'O'-ring sealing and 'G' series
fastening threads
Stairs -- Code of practice for the design of
stairs with straight flights and winders
MCE/18
confirmed (2010)
B/208
current
Specification for performance requirements
and tests for office furniture -- Office
pedestal seating for use by persons weighing
up to 150kg and for use up to 24 hours a
day, including type-approval tests for
individual components
Code of practice for domestic butane- and
propane-gas-burning installations -Installations at permanent dwellings,
residential park homes and commercial
premises, with installation pipework sizes not
exceeding DN 25 for steel and DN 28 for
corrugated stainless steel or copper
FW/0/3
confirmed (2010)
GSE/24
confirmed (2010)
BS 54892:2003+A1:2008
BS 550250:1993+A2:2010
Code of practice for the design of road
lighting -- Lighting of tunnels
Buildings and structures for agriculture -Code of practice for design, construction and
use of storage tanks and reception pits for
livestock slurry
EL/1/2
current
B/549
current
BS 5507-1:1977
Methods of test for falsework equipment -Floor centres
Methods of test for falsework equipment -Props
B/514
confirmed (2010)
B/514
BS 5546:2010
Specification for installation and maintenance
of gas-fired water-heating appliances of
rated input not exceeding 70 kW net
GSE/30
partially replaced
by BS EN
1065:1999
current
BS 5550-2.11.2:1980
Cinematography. 16 mm film. Spindles -Specification for dimensions of precision
grade spindles for 16 mm cinematograph
equipment and telecine machines
CPW/36
partially replaced
by BS 55502.11.1:1978
BS 5605:1990
Recommendations for citing and referencing
published material
Escalator and moving walks. Safety rules for
the construction and installation of escalators
and moving walks -- Code of practice for the
selection, installation and location of new
escalators and moving walks
IDT/2/2
confirmed (2010)
MHE/4
confirmed (2010)
Specification for asbestos-cement flue pipes
and fittings, light quality
Specification for probes (quick connectors)
for use with medical gas pipeline systems
B/506
confirmed (2010)
CH/121/1
current
Code of practice for flues and flue structures
in buildings
Installation and maintenance of gas-fired
ducted air heaters of rated heat input not
exceeding 70 kW net (2nd and 3rd family
gases). Specification
Textiles and textile products. Curtains and
drapes -- General requirements
B/506
confirmed (2010)
GSE/30/-/7
current
TCI/66
confirmed (2010)
BS 5395-1:2010
BS 54592:2000+A2:2008
BS 5482-1:2005
BS 5507-3:1982
BS 5656-2:2004
BS 567:1973
BS 5682:1998
BS 5854:1980
BS 5864:2010
BS 5867-1:2004
January 2015
Page 9 of 20
Email your comments to: BSUKoperations.review@bsigroup.com
Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS 5867-2:2008
Fabrics for curtains, drapes and window
blinds -- Flammabililty requirements.
Specification
Automatic gas burners -- Specification for
burners with input rating 60 kW and above
TCI/66/-/8
current
GSE/27
BS 5885-2:1987
Automatic gas burners -- Specification for
packaged burners with input rating 7.5 kW
up to but excluding 60 kW
GSE/27
partially replaced
by BS EN
676:1997
partially replaced
by BS EN
676:1997
BS 5892-2:1992
Railway rolling stock materials -- Specification
for forged and rolled wheel centres
RAE/3/-/1
confirmed (2010)
BS 58923:1992+A2:2009
Railway rolling stock materials -- Specification
for monobloc wheels for traction and trailing
stock
Railway rolling stock materials -- Specification
for forged and rolled tyres
RAE/3/-/1
confirmed (2010)
RAE/3/-/1
confirmed (2010)
BS 5892-6:1992
Railway rolling stock materials -- Specification
for wheelsets for traction and trailing stock
RAE/3/-/1
confirmed (2010)
BS 59111:2002+A2:2010
Concrete pipes and ancillary concrete
products -- Specification for unreinforced and
reinforced concrete pipes (including jacking
pipes) and fittings with flexible joints
(complementary to BS EN 1916:2002)
B/505
current
BS 59114:2002+A2:2010
Concrete pipes and ancillary concrete
products -- Specification for unreinforced and
reinforced concrete inspection chambers
(complementary to BS EN 1917:2002)
B/505
current
BS 59115:2004+A1:2010
Concrete pipes and ancillary concrete
products -- Specification for prestressed nonpressure pipes and fittings with flexible joints
B/505
current
BS 59116:2004+A1:2010
Concrete pipes and ancillary concrete
products -- Specification for road gullies and
gully cover slabs
B/505
current
BS 5885-1:1988
BS 5892-4:1992
January 2015
Page 10 of 20
Email your comments to: BSUKoperations.review@bsigroup.com
Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS
5930:1999+A2:2010
Code of practice for site investigations
B/526/3
BS 5958-1:1991
Code of practice for control of undesirable
static electricity -- General considerations
EXL/31
BS 5974:2010
Code of practice for the planning, design,
setting up and use of temporary suspended
access equipment
B/514/39
partially replaced
by BS EN ISO
14688-1:2002, BS
EN ISO 146882:2004, BS EN
ISO 146891:2003, BS EN
ISO 224751:2006, BS EN
ISO 224762:2005, BS EN
ISO 224763:2005, BS EN
1997-2:2007, BS
EN ISO 222821:2012, BS EN
ISO 222822:2012, BS EN
ISO 222823:2012, BS EN
ISO 222824:2012, BS EN
ISO 222825:2012, BS EN
ISO 222826:2012, BS EN
ISO 224761:2012, BS EN
ISO 224767:2012, BS EN
ISO 22476-5:2012
and BS EN ISO
22476-4:2012
replaced by PD
CLC/TR
50404:2003
current
BS 5977-1:1981
Lintels -- Method for assessment of load
B/519/3
confirmed (2010)
BS 598-110:1998
Sampling and examination of bituminous
mixtures for roads and other paved areas -Methods of test for the determination of
wheel-tracking rate and depth
B/510/1
current
BS 598-112:2004
Sampling and examination of bituminous
mixtures for roads and other paved areas -Method for the use of road surface hardness
probe
B/510/2
confirmed (2010)
BS 5998:1983
Specification for quality levels for steel valve
castings
Aerospace series. Procedure for inspection,
testing and acceptance of seamless steel
tubes and tubestock
PSE/18/1
confirmed (2007)
ACE/61
current
Ethylene propylene rubber compounds.
Specification
PRI/54
confirmed (2008)
BS 5T 100:2010
BS 6014:2003
January 2015
Page 11 of 20
Email your comments to: BSUKoperations.review@bsigroup.com
Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS 6037-2:2004
Code of practice for the planning, design,
installation and use of permanently installed
access equipment -- Travelling ladders and
gantries
B/514/39
confirmed (2010)
BS 6072:1981
Method for magnetic particle flaw detection
WEE/46
BS 6079-1:2010
Project management -- Principles and
guidelines for the management of projects
MS/2
partially replaced
by BS EN ISO
9934-1:2001
current
BS 6089:2010
Assessment of in-situ compressive strength
in structures and precast concrete
components. Complementary guidance to
that given in BS EN 13791
B/517/1
current
BS 6100-0:2010
Building and civil engineering. Vocabulary -Introduction and index
CB/101/-/2
current
BS 6165:2002
Specification for small disposable fire
extinguishers of the aerosol type
FSH/2
confirmed (2010)
BS 6172:2010
Specification for installation, servicing and
maintenance of domestic gas cooking
appliances (2nd and 3rd family gases)
GSE/30/-/10
current
BS 6200-2.1:1993
Sampling and analysis of iron, steel and
other ferrous metals. Sampling and sample
preparation -- Methods for iron and steel
ISE/102
confirmed (2008)
BS 6200-3.0:2002
Sampling and analysis of iron, steel and
other ferrous metals. Methods of analysis -Reference methods of analysis. Summary of
methods
ISE/102
confirmed (2008)
BS
6213:2000+A1:2010
BS 6349-2:2010
Selection of construction sealants. Guide
B/547
current
Maritime works -- Code of practice for the
design of quay walls, jetties and dolphins
CB/502
current
BS 6364:1984
Specification for valves for cryogenic service
PSE/18/1
confirmed (2007)
BS 6371:1983
Recommendations for citation of unpublished
documents
Specification for drawing boards
Specification for normal and high strength
steel bolts and nuts for railway rail fishplates
IDT/2/2
confirmed (2010)
TDW/4
RAE/2
confirmed (2010)
confirmed (2010)
Magnetic materials -- Resistance and
temperature classification of insulation
coatings
Dimensions of small rivets for general
purposes
Sanitary installations -- Code of practice for
the provision of public toilets
ISE/108
confirmed (2010)
FME/9
B/209/-/2
obsolescent
(2010)
current
BS 65:1991
Specification for vitrified clay pipes, fittings
and ducts, also flexible mechanical joints for
use solely with surface water pipes and
fittings
B/505
confirmed (2010)
BS 6510:2010
Steel-framed windows and glazed doors.
Specification
Specification for staple type connectors for
hydraulic fluid power applications
B/538/1
current
MCE/18
confirmed (2010)
BS 6381:1983
BS 64:1992
BS 6404-20:1996
BS 641:1951
BS 6465-4:2010
BS 6537:1984
January 2015
Page 12 of 20
Email your comments to: BSUKoperations.review@bsigroup.com
Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS 6580:2010
Specification for corrosion inhibiting, engine
coolant concentrate ("antifreeze")
I/-
current
BS 6626:2010
Maintenance of electrical switchgear and
controlgear for voltages above 1 kV and up
to and including 36 kV. Code of practice
PEL/17/1
current
BS 6656:2002
Assessment of inadvertent ignition of
flammable atmospheres by radio-frequency
radiation. Guide
Assessment of inadvertent initiation of bridge
wire electro-explosive devices by radiofrequency radiation. Guide
EXL/31
replaced by PD
CLC/TR
50427:2004
replaced by PD
CLC/TR
50426:2004
BS 6701:2010
Telecommunications equipment and
telecommunications cabling. Specification for
installation, operation and maintenance
TCT/7
current
BS 6734:2004
Antimicrobial efficacy of disinfectants for
veterinary and agricultural use. Method
CH/216
confirmed (2010)
BS 6788-2:1990
Neurosurgical implants -- Specification for
marking and packaging of implantable neural
stimulators
CH/150/2
confirmed (2010)
BS 6806:2002
Textiles. Determination of formaldehyde.
Method for the determination of total and
free (water extraction method) formaldehyde
using chromotropic acid
TCI/80
confirmed (2010)
BS 6807:1986
Methods of test for the ignitability of
mattresses with primary and secondary
sources of ignition
Winding wires. Basic dimensions -Specification for diameters of conductors for
round winding wires
Methods for calibration of bonded electrical
resistance strain gauges
Mineral oil resistant acrylonitrile-butadiene
rubber compounds. Specification
FW/6
replaced by BS
6807:1990
L/-/99
obsolescent
(2008)
ISE/101
confirmed (2007)
PRI/54
confirmed (2008)
BS 6999:1989
Specification for vitreous-enamelled lowcarbon-steel flue pipes, other components
and accessories for solid-fuel-burning
appliances with a rated output of 45 kW
B/506
confirmed (2010)
BS 6S 100:2010
Aerospace series. Procedure for inspection,
testing and acceptance of wrought steels
(other than plate, sheet, strip and tube)
ACE/61
current
BS 7000-2:2008
TDW/4/7
current
MS/4
current
BS 7014:1989
Design management systems -- Guide to
managing the design of manufactured
products
Design management systems -- Guide to
managing service design
Guide to the romanization of Chinese
IDT/2
confirmed (2010)
BS 7114-1:1988
Fireworks -- Classification of fireworks
CII/47
BS 7114-2:1988
Fireworks -- Specification for fireworks
CII/47
obsolescent
(2010)
obsolescent
(2010)
BS 6657:2002
BS 6811-1.1:1987
BS 6888:1988
BS 6996:2003
BS 7000-3:1994
January 2015
EXL/31
Page 13 of 20
Email your comments to: BSUKoperations.review@bsigroup.com
Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS 7114-3:1988
Fireworks -- Methods of test for fireworks
CII/47
BS 7121-4:2010
MHE/3/11
TDW/4
confirmed (2010)
BS
7188:1998+A2:2009
Code of practice for safe use of cranes -Lorry loaders
Guide to assessment of position, size and
departure from nominal form of geometric
features
Impact absorbing playground surfacing.
Performance requirements and test methods
partially replaced
by BS EN 14035
parts and DD
14035:2007
current
SW/65
confirmed (2010)
BS
7195:1989+A1:2010
Guide for prevention of corrosion of metals
caused by vapours from organic materials
PKW/0
current
BS 7270:2006
Metallic materials. Constant amplitude strain
controlled axial fatigue. Method of test
ISE/101
current
BS 7272-1:2008
Writing and marking instruments -Specification for caps to reduce the risk of
asphyxiation
Thermoplastics pipe and fitting systems for
hot and cold water for domestic purposes
and heating installations in buildings -General requirements
TDW/4/-/2
current
PRI/88
current
Thermoplastics pipe and fitting systems for
hot and cold water for domestic purposes
and heating installations in buildings -Specification for polybutylene (PB) pipe and
associated fittings
Thermoplastics pipe and fitting systems for
hot and cold water for domestic purposes
and heating installations in buildings -Specification for crosslinked polyethylene
(PE-X) pipes and associated fittings
PRI/88
current
PRI/88
current
Components for smoke and heat control
systems -- Functional recommendations and
calculation methods for smoke and heat
exhaust ventilation systems, employing
steady-state design fires. Code of practice
Coatings on metal fasteners -- Specification
for organic coatings
Coatings on metal fasteners -- Specification
for torque/clamping force relationship
FSH/25
confirmed (2008)
FME/9
confirmed (2010)
FME/9
confirmed (2010)
BS 7371-4:1994
Coatings on metal fasteners -- Specification
for electroplated nickel, nickel/chromium and
copper/nickel/chromium coatings
FME/9
confirmed (2010)
BS 7371-7:2010
Coatings on metal fasteners -- Specification
for mechanically applied zinc and zinc based
coatings
FME/9
current
BS 7371-9:1996
Coatings on metal fasteners -- Specification
for phosphate or phosphate and oil coatings
FME/9
confirmed (2010)
BS 7375:2010
Distribution of electricity on construction and
demolition sites. Code of practice
PEL/121/2
current
BS 7172:1989
BS 7291-1:2010
BS 7291-2:2010
BS 7291-3:2010
BS 7346-4:2003
BS 7371-10:1994
BS 7371-2:1993
January 2015
Page 14 of 20
Email your comments to: BSUKoperations.review@bsigroup.com
Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS 7448-3:2005
Fracture mechanics toughness tests -Method for determination of fracture
toughness of metallic materials at rates of
increase in stress intensity factor greater
than 3.0 MPa m0.5 s-1
ISE/101
current
BS 7448-4:1997
Fracture mechanics toughness tests -Method for determination of fracture
resistance curves and initiation values for
stable crack extension in metallic materials
ISE/101
confirmed (2007)
BS 7533-10:2010
Pavements constructed with clay, natural
stone or concrete pavers -- Guide for the
structural design of trafficked pavements
constructed of natural stone setts and bound
construction with concrete paving blocks
B/507
current
BS 7533-7:2010
Pavements constructed with clay, natural
stone or concrete pavers -- Code of practice
for the construction of pavements of natural
stone paving units and cobbles, and rigid
construction with concrete block paving
B/507
current
BS 7533-9:2010
Pavements constructed with clay, natural
stone or concrete pavers -- Code of practice
for the construction of rigid pavements of
clay pavers
B/507
current
BS 7581:1992
Guide to presentation of tables and graphs
IDT/2
confirmed (2010)
BS 7619:2010
Extruded cellular unplasticized white PVC
(PVC-UE) profiles. Specification
PRI/82
current
BS 7647:1993
Specification for radio teleswitches for tariff
and load control
Specification for single-phase street lighting
cut-out assemblies for low-voltage public
electricity distribution systems. 25 A rating
for highway power supplies and street
furniture
PEL/13
confirmed (2010)
PEL/121/1
current
BS 7657:2010
Specification for cut-out assemblies up to 100
A rating, for power supply to buildings
PEL/121/1
current
BS 7659:1994
BS 7668:2004
Specification for dog muzzles
Weldable structural steels. Hot finished
structural hollow sections in weather
resistant steels. Specification
GW/3
ISE/103
confirmed (2010)
confirmed (2010)
BS 7722:2010
Surface covered PVC-U profiles for windows
and doorsets. Specification
B/538/1
current
BS 7805-1:1995
Swaged collar grooved rivets -- Specification
for sizes up to and including 10 mm diameter
FME/9
confirmed (2010)
BS 7805-2:1997
Swaged collar grooved rivets -- Specification
for sizes from 12.7 mm up to and including
34.9 mm
Calibration of rubber and plastics test
equipment. Calibration schedules -Dimensional properties
FME/9
confirmed (2010)
PRI/20
obsolescent
(2008)
Specification for flammability performance for
textiles used in the construction of marquees
and similar textile structures
TCI/66/-/8
confirmed (2008)
BS 7654:2010
BS 7825-3.6:1997
BS 7837:1996
January 2015
Page 15 of 20
Email your comments to: BSUKoperations.review@bsigroup.com
Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS 7855-1:1996
Metric rivets for the attachment of friction
linings -- Specification for semi-tubular rivets
FME/9
confirmed (2010)
BS 7865:1997
Specification for steel electrical conductor rail
for railway motive power supply
RAE/2
confirmed (2010)
BS 7875:2009
Synthetic saddle trees. Specification
SW/136
current
BS 7882:2008
Method for calibration and classification of
torque measuring devices
ISE/101
current
BS 7899-1:1997
Code of practice for assessment of hazard to
life and health from fire -- General guidance
FSH/16
confirmed (2010)
BS 7899-2:1999
Code of practice for assessment of hazard to
life and health from fire -- Guidance on
methods for the quantification of hazards to
life and health and estimation of time to
incapacitation and death in fires
FSH/16
confirmed (2010)
BS 7915:1998
Ergonomics of the thermal environment.
Guide to design and evaluation of working
practices for cold indoor environments
PH/9
confirmed (2006)
BS 7956:2000
Specification for primers for woodwork
STI/28
confirmed (2010)
BS 7963:2000
Ergonomics of the thermal environment.
Guide to the assessment of heat strain in
workers wearing personal protective
equipment
PH/9
confirmed (2006)
BS 7967-5:2010
Carbon monoxide in dwellings and other
premises and the combustion performance of
gas-fired appliances -- Guide for using
electronic portable combustion gas analysers
in non-domestic premises for the
measurement of carbon monoxide and
carbon dioxide levels and the determination
of combustion performance
GSE/30
current
BS 7971-1:2002
Protective clothing and equipment for use in
violent situations and in training -- General
requirements
Protective clothing and equipment for use in
violent situations and in training -- Slash
resistant gloves. Requirements and test
methods
PH/3/12
confirmed (2007)
PH/3/12
current
BS 799-5:2010
Oil burning equipment -- Carbon steel oil
storage tanks. Specification
RHE/13
current
BS 7996:2009
Torque measuring devices. Calibration and
classification using continual torque
application. Method
ISE/101
current
BS 800016:1997+A1:2010
Workmanship on building sites -- Code of
practice for sealing joints in buildings using
sealants
Workmanship on building sites. Code of
practice for concrete work -- Sitework with in
situ and precast concrete
B/547
partially replaced
by BS 80000:2014
partially replaced
by BS 80000:2014
Code of practice for strengthened/reinforced
soils and other fills
B/526/4
BS 7971-7:2003
BS 8000-2.2:1990
BS 8006-1:2010
January 2015
B/525/2
current
Page 16 of 20
Email your comments to: BSUKoperations.review@bsigroup.com
Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS
8008:1996+A1:2008
Safety precautions and procedures for the
construction and descent of machine-bored
shafts for piling and other purposes
B/526
confirmed (2010)
BS 82041:2003+A1:2009
Screeds, bases and in situ floorings -Concrete bases and cementitious levelling
screeds to receive floorings. Code of practice
CB/300
current
BS 82046:2008+A1:2010
Screeds, bases and in situ floorings -Synthetic resin floorings. Code of practice
CB/300
current
BS 822-6:2004
Terminal markings for electrical machinery
and apparatus -- Lead colours for rotating
electrical machinery
PEL/2
confirmed (2010)
BS 826:1978
Specification for steel single tier bolted
shelving (angle upright type)
Code of practice for the design and
installation of natural stone cladding and
lining -- General
Code of practice for the design and
installation of natural stone cladding and
lining -- Traditional handset external cladding
MHE/8
confirmed (2008)
B/545
current
B/545
current
BS 8298-3:2010
Code of practice for the design and
installation of natural stone cladding and
lining -- Stone-faced pre-cast concrete
cladding systems
B/545
current
BS 8298-4:2010
Code of practice for the design and
installation of natural stone cladding and
lining -- Rainscreen and stone on metal
frame cladding systems
B/545
current
BS
8300:2009+A1:2010
Design of buildings and their approaches to
meet the needs of disabled people. Code of
practice
Installation of domestic heating and cooking
appliances burning solid mineral fuels -Installation of domestic heating and cooking
appliances burning solid mineral fuels.
Specification for the design of installations
B/559
current
RHE/28
current
BS 835:1973
Specification for asbestos-cement flue pipes
and fittings, heavy quality
B/506
confirmed (2010)
BS 842:1965
Specification for a.c. voltage-operated earthleakage circuit breakers
PEL/23
confirmed (2010)
BS 8422:2003
Force measurement. Strain gauge load cell
systems. Calibration method
ISE/101
confirmed (2008)
BS 8423:2010
Fireguards for fires and heating appliances
for domestic use. Specification
CW/1
current
BS 8427:2004
Jug water filter systems. Specification
B/504
confirmed (2010)
BS 8428:2004
Protective clothing. Protection against liquid
chemicals. Performance requirements for
chemical protective suits with liquid-tight
connections between different parts of the
clothing for emergency teams (type 3-ET
equipment)
PH/3/3
confirmed (2010)
BS 8431:2010
Electrical static meters for secondary
metering and sub-metering. Specification
SEM/1
current
BS 8298-1:2010
BS 8298-2:2010
BS 8303-1:1994
January 2015
Page 17 of 20
Email your comments to: BSUKoperations.review@bsigroup.com
Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS
8438:2004+A1:2010
BS 8465:2010
Troughed belt conveyors. Specification
MHE/9
current
Hydraulic fluid power. Monitoring the level of
particulate contamination. Comparison
membrane technique
MCE/18
current
BS 8468-2:2006
Respiratory protective devices for use against
chemical, biological, radiological and nuclear
(CBRN) agents -- Negative pressure, air
purifying devices with full face mask.
Specification
PH/4
current
BS 8468-4:2008
Respiratory protective devices for use against
chemical, biological, radiological and nuclear
(CBRN) agents -- Powered air-purifying
respirators. Specification
PH/4
current
BS
8488:2009+A1:2010
Prefabricated wiring systems intended for
permanent connection in fixed installations.
Specification
Method for assessment of fire integrity of
large diameter power cables for use as
components for smoke and heat control
systems and certain other active fire safety
systems
PEL/23
current
GEL/20/18
current
Light reflectance value (LRV) of a surface.
Method of test
Code of practice for the installation of solid
fuel heating and cooking appliances in small
craft
Security dogs -- Code of practice for the use
of detection dogs
Selection and installation of fire-resistant
power and control cable systems for life
safety and fire-fighting applications. Code of
practice
B/559
current
RHE/28/-/1
current
GW/3
current
FSH/1
current
BS 8525-1:2010
Greywater systems -- Code of practice
CB/506
current
BS 8529:2010
Composite doorsets. Domestic external
doorsets. Specification
Traditional-style half round, beaded half
round, Victorian ogee and moulded ogee
aluminium rainwater systems. Specification
B/538/2
current
B/542/6
current
Facility management briefing. Code of
practice
Copper and copper alloys. Plumbing fittings.
Specification for press ends of plumbing
fittings for use with metallic tubes
FMW/1
current
NFE/34/3
current
BS 8580:2010
Water quality. Risk assessments for
Legionella control. Code of practice
EH/3/4
current
BS 8666:2005
Scheduling, dimensioning, bending and
cutting of steel reinforcement for concrete.
Specification
Names and identifiers of individuals and
groups. Data structure for interoperability.
Specification
Web accessibility. Code of practice
ISE/104
current
IST/36
confirmed (2010)
IST/45
current
BS 8491:2008
BS
8493:2008+A1:2010
BS 8511:2010
BS 8517-2:2010
BS 8519:2010
BS 8530:2010
BS 8536:2010
BS 8537:2010
BS 8766:2004
BS 8878:2010
January 2015
Page 18 of 20
Email your comments to: BSUKoperations.review@bsigroup.com
Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
BS 8887-220:2010
Design for manufacture, assembly,
disassembly and end-of-life processing
(MADE) -- The process of remanufacture.
Specification
TDW/4
current
BS 8903:2010
Principles and framework for procuring
sustainably. Guide
Guide to the structural design of buried
pipelines
Specification for internal micrometers
(including stick micrometers)
SDS/1/3
current
B/505
current
TDW/4
current
BS 9999:2008
Code of practice for fire safety in the design,
management and use of buildings
FSH/14
current
BS A 400:2010
Specification for nuts, plain and slotted
(unified hexagons and unified threads) for
shear bolts for aircraft in corrosion-resisting
steel
ACE/12
current
BS AU 170:1979
Methods for measurement of reflectance of
rear view mirrors
Code of practice for pipelines -- Design and
construction of steel pipelines in land
AUE/12
confirmed (2010)
PSE/17
confirmed (2010)
Code of practice for foundations for
machinery -- Foundations for reciprocating
machines
Mouthguards for use in sport and recreation.
Requirements and test methods
B/526
confirmed (2010)
PH/3/11
current
DD 263:2010
Intruder and hold-up alarm systems.
Commissioning, maintenance and remote
support. Code of practice
GW/1/2
current
DD 8489-5:2011
Fixed fire protection systems. Industrial and
commercial watermist systems -- Tests and
requirements for watermist systems for the
protection of combustion turbines and
machinery spaces with volumes up to and
including 80 m$u3
FSH/18
current
PD 0006:1995
Technical guide to JPEG. Digital compression
of photographic images
IST/37
confirmed (2010)
PD 0017:2001
Business documents. Guidance on effective
layout and presentation
Information management systems. Building
systems fit for audit
Quantitative software management. Software
measurement methods. A guide to the use of
ISO/IEC and other standards for obtaining
and using software measurements for
product and process improvement
IDT/2
confirmed (2010)
ICT/-
confirmed (2010)
IST/15
confirmed (2010)
PD 25111:2010
Business continuity management. Guidance
on human aspects of business continuity
BCM/1
current
PD 25666:2010
Business continuity management. Guidance
on exercising and testing for continuity and
contingency programmes
BCM/1
current
PD 6433:1969
Guide to the application of stress analysis to
design
PVE/1
confirmed (2010)
BS 9295:2010
BS 959:2008
CP 2010-2:1970
CP 2012-1:1974
DD 253:2001
PD 0018:2001
PD 0028:2002
January 2015
Page 19 of 20
Email your comments to: BSUKoperations.review@bsigroup.com
Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3
You must include BS identifier Committee
PD 6439:1969
A review of the methods of calculating
stresses due to local loads and local
attachments of pressure vessels
PVE/1
confirmed (2010)
PD 6461-4:2004
General metrology -- Practical guide to
measurement uncertainty
Toxicity of combustion products -- Guide to
the relevance of small-scale tests for
measuring the toxicity of combustion
products of materials and composites
SS/6
confirmed (2010)
FSH/16
confirmed (2010)
PD 6512-3:1987
Use of elements of structural fire protection
with particular reference to the
recommendations given in BS 5588 'Fire
precautions in the design and construction of
buildings' -- Guide to the fire performance of
glass
FSH/14
current
PD 6531:2010
Queries and interpretations on BS 5839-1
FSH/12/1
current
PD 6612:2004
Guidance on the preparation of codes of
practice for building
Technical guide to ISO/IEC 13522-5:1997.
Information technology. Coding of
multimedia and hypermedia information.
Support for base-level interactive applications
(MHEG-5)
CB/10
current
IST/37
confirmed (2010)
Scheme for the application of European
standards for intrusion and hold-up alarm
systems
Aggregates -- Armourstone. Guidance on the
use of BS EN 13383
GW/1/2
current
B/502
current
PD 6687-1:2010
Background paper to the National Annexes to
BS EN 1992-1 and BS EN 1992-3
B/525/2
current
PD 6697:2010
Recommendations for the design of masonry
structures to BS EN 1996-1-1 and BS EN
1996-2
Nanotechnologies -- Guide to assessing
airborne exposure in occupational settings
relevant to nanomaterials
B/525/6
current
NTI/1
current
Guide to practical implementation of JPEG
2000
IST/37
confirmed (2010)
PD 6503-2:1988
PD 6631:1998
PD 6662:2010
PD 6682-7:2003
PD 6699-3:2010
PD 6777:2003
January 2015
Page 20 of 20