WAGENBORG OILFIELD SERVICES
DRILLING TOOLS RENTAL
MACHINE SHOP SERVICES
CASING EXIT SYSTEM
HARDFACING SOLUTIONS
DOWNHOLE SERVICES
EXPERIENCED
HIGH QHSE STANDARDS
FLEXIBLE
MODERN EQUIPMENT
WELCOME TO
WAGENBORG OILFIELD SERVICES
ACCURATE
Wagenborg Oilfield Services LLC started in
Russia in 2010. The head office of the company
is located in Noyabrsk, western Siberia. Being
a worldwide operating company and a part
of Royal Wagenborg, Wagenborg Oilfield
Services LLC is dedicated to provide services
and equipment of high quality.
All Wagenborg Oilffield Services employees regardless
of their position follow the rules and are compliant with
the laws of the Russian Federation, as well as with the
internal rules and company health and safety policy. We
take care of the environment and do not allow any soil
and air pollution by industrial waste.
We offer a wide variety of equipment and services for the
oil and gas industry in whole of Russia.
1. Drilling tools rental
• Double-acting hydraulic drilling jars
• Tubulars (hwdp, drill pipe, drill collar)
• Stabilizers, crossovers
• Handling tools
2. API licensed machine shop
• Threading of api connections
• Crossovers manufacturing from steel aisi 4145h
mod qt
• Special tools manufacturing
3. Casing exit system
• Wagenborg wedgecut®
• Engineering support
4. Hardfacing solution
• Steel stabilizer redress
5. Downhole services
• Fishing services with engineering support
• Milling services with engineering support
• Pipe recovery services (rct/ptc) with engineering
support
• Power swivel with engineering support
ROYAL WAGENBORG
INTEGRATED LOGISTICS
Wagenborg Oilfield Services is a member of Royal
Wagenborg. Founded in 1898, the company
continuously invests in various means of transport
to serve the needs of a broad variety of customers
by sea, shallow water and road, offering a complete
chain of transport.
Wagenborg companies are involved in shipping,
stevedoring,
road
transport,
forwarding,
warehousing, crane rental, heavy lifting, heavy
transport, oil and gas related services, towage and
passenger services.
Our integrated logistic solutions are flexible and
reliable, provided by our dedicated crew of more
than 3,500 employees. Royal Wagenborg has
identified quality, health, safety and the environment
as key factors.
DOUBLE ACTION JARS
QUALITY
DOUBLE ACTION DRILLING JARS
SALES, RENTAL AND SERVICES
SALES & RENTAL
UNIQUE IN RUSSIA
Wagenborg Oilfield Services offers PD double
acting drilling jars rentals and sales. These
jars are proven to be one of the leading jars
worldwide. PD jars can be used both as a single
shock tool in the string and in assembly with the
PD energizer and bumper sub. This type of jar
does not have a silicone section which allows to
use it much longer during operation.
We can guarantees jar operation for 350 circulation
hours and 350 drilling hours in standard temperatures.
The jar does not have any chromated or polished surfaces
which makes it exceptionally damage resistant.
Wagenborg Oilfield Services is the only company in
Russia which can offer a double acting drilling jar with
OD 4 1/8” (105mm). This size is optimal for jobs in 5
3⁄4” (146mm) casing, because such jars are fishable in
this size of casing.
Jarring Up
To jar up apply overpull at the jar as required and wait
for jar to fire, lock will automatically release when lock
setting load is exceeded. The more overpull applied on
the jar, the greater impact will be achieved. To repeat
jarring, reset jar into locked position by applying weight
on the jar which then automatically will return to it’s locked
position and again be ready to be fired up or down as
required. Jar lock load will have to be exceeded for the
lock to release and hydraulics to be engaged. Overpull in
excess of Max Pre-Jarring should not be applied as it may
damage the hydraulics of the jar.
Jarring Down
To jar down, apply weight on the jar as required and wait
for jar to fire, the lock will automatically release when
lock setting load is exceeded. The more weight applied on
the jar, the greater impact will be achieved. To repeat to
jarring, reset jar into locked position by applying overpull
at the jar which then automatically will return to it’s locked
position and again be ready to be fired up or down as
required. Jar lock load will have to be exceeded for lock
to release and hydraulics to be engaged.
Energizer Up and Down Operation
The energizer will automatically be applied when
opening the jar so fully concentrate on the loads applied
on the jar and the energizer will adjust as required. The
energizer will, when operated with the ‘PD’ Jar, increase
acceleration of hammer weight between jar and energizer
and thereby increase impacts. The impacts will also due to
the two-stage design increase impacts in horizontal wells.
This double action energizer will also minimize jarring
shock loads on working string and topside equipment.
PUMP FORCE TABLE
Pump pressure will generate a force, which will try to open the
tool and thereby increase ease of opening jar lock and increase
impact. For calculation please refer to Pump Force table. In
horizontal wells the energizer will, due to the Pump Open Force
and spring force, also assist in moving the BHA to maintain weight
on bit.
DOUBLE ACTION JARS
QUALITY
DOUBLE ACTION DRILLING JARS
SALES, RENTAL AND SERVICES
SALES & RENTAL
UNIQUE IN RUSSIA
The ‘PD’ Jar can be placed in the bottom hole assembly
either in tension or compression but it is recommended
that the jar is placed as close to any possible stuck point
in order to achieve the highest impact where it counts.
Ensure that sufficient weight (hammer weight) is placed
above the jar for high impact.
The energizer should be placed above the jar hammer
weight and with sufficient weight above the energizer in
order to ensure high down jar impact. Never place jar
or energizer at the neutral point in string as it may cause
excessive wear and/or damage to the tools.
Never place tools at a transition point (i.e.between 8”
(203mm) O.D. and 6 ½” (165mm) O.D. collars).
Never place jar next to or below a stabilizer, roller reamer
or similar tool. Drill collars and/or pipe connection O.D.
above the jar and immediate (1-2 joints) below the jar
should never be larger than the O.D. of the jar.
For dual jar and energizer placement it is recommended
that all notes on placement are considered and that
the second jar should be placed higher up in the string
again with sufficient hammer weight to fire up or down
as required.
Beware that if weight below the jar is greater than lock
setting of the jar, the lock may release to activate jar
hydraulics when string is picked up. Jar can be delivered
in open position with a clamp to eliminate this problem.
The ‘PD’ Drilling Jar and Drilling Energizer are a new
generation of drilling tools designed and manufactured
for the severe drilling conditions of today, such as severe
directional and horizontal drilling conditions.
Ensuring secure and durable operation and providing high
impact as and when required, regardless if in vertical,
high angle or the horizontal section of the well. The ‘PD’
tools feature high strength steel, no chrome exposure
either internal or external to drilling fluids or bore hole.
Low internal friction due to design and use of low friction
sealing arrangement.
Large internal diameter for high volume fluid passage
has been achieved without sacrificing tool strength. High
impacts even under low loads which can be increased
considerably with the use of the two stage mechanical ‘PD’
Energizer. Also the Energizer will absorb shock waves to
surface and thereby limit damage to surface equipment.
JAR CHARACTERISTICS
TOOL SIZE NOMINAL
4 1/8’’
4 3/4’’
6 1/2’’
8’’
9 1/2’’
lbs
tons
20-25000
9-11
35-35000
13.5-16
60-80000
27-36
70-90000
32-41
80-100000
32-45
lbs
tons
8-12000
3.5-5.5
10-18000
4.5-8
25-33000
11-15
30-40000
13.5-18
30-45000
13.5-20
1-2 min
1-2 min
1-2 min
10-40 sec
10-50 sec
10-50 sec
10-50 sec
Lock setting up
Hydraulic delay up
35000 lbs
19 tons
1-2 min
50000 lbs
23 tons
1-2 min
100000 lbs
45.5 tons
Delay at max overpull up
10-30 sec
Hydraulic delay down
20000 lbs
9 tons
1-2 min
30000 lbs
13.5 tons
2-3 min
2-3 min
2-3 min
2-3 min
2-3 min
40000 lbs
23 tons
1-2 min
1-2 min
1-2 min
1-2 min
1-2 min
40-60 sec
40-60 sec
40-60 sec
65
6 1/2’’
80
8’’
95
9 1/2’’
100000 lbs
45.5 tons
PD JAR &
ENERGIZER SERIES
41
4 1/8’’
47
4 3/4’’
Tool size OD inches
4.20
4.94
6.64
8.17
9.69
Bore ID
1.56’’
2.25’’
2.56’’
3.00’’
3.25’’
Overpull max lbs
75000
90000
180000
280000
410000
323280
402740
921000
1564000
2014000
12990
17700
58400
112800
162300
8.30
11.79
19.64
29.47
41.29
18
20
20
20
20
Max temp F/C standard
275/132
275/132
275/132
275/132
275/132
Max temp F/C high
450/232
450/232
450/232
450/232
450/232
350
350
350
350
350
Tensile load lbs
Yield torque ft/lbs
P.O.A. sq. in.
Overall stroke (inch)
Max drilling hrs up to 275F
Max drilling hrs up to 400F
Length approx m/ft
Wight approx kg/lbs
200
200
200
200
200
5.2/17
6.7/22
6.7/22
6.7/22
6.7/22
290/620
400/880
820/1800
1350-2970
1900/4180
Please note that all above loads and time delays are approximate only.
WORKSHOP
EXPERIENCED
OPERATORS
FLEXIBLE
API LICENSED
MACHINE SHOP
HIGH QHSE STANDARDS
MODERN EQUIPMENT
ACCURATE
Wagenborg Oilfield Services provides drill stem
repair and manufacturing of drilling tools:
• Cutting and repairing of API threaded
connections (Internal Flush, Full Hole,
American Open Hole, Regular, External
Flush, EUE, NUE, ACME, STUB ACME etc.)
• Manufacturing of drill stem elements from
Steel Grade 4145H MOD by API Spec. 7, API
Spec. 5CT, GOST requirements.
• Manufacturing of specialized equipment
We employ highly qualified specialists, our lathe operators
have more than 20 years of experience in working with
drilling and production equipment.
All our products go through quality control – inspection,
which consists of visual inspection and magnetic particle
testing.
Our lathe operators have more
than 20 years of experience
in working with drilling and
production equipment.
All our threads are cuprum coated and tool joint
compounds are applied in accordance with customer
requirements (Z-50,Z-50 Arctic Grade, KOPR KOTE Arctic
Grade are available) and thereby increase impacts. The
impacts will also due to the two-stage design increase
impacts in horizontal wells. This double action energizer
will also minimize jarring shock loads on working string
and topside equipment.
Lathe works are performed by CNC lathe machines and
lathe machines with hydrocopier devices. The spindle drift
ID of the CNC machines is 10 1/4” (260mm) and of the
machine with hydrocopier devices - 12” (304.8mm).
It is impossible to cut a thread on a universal lathe machine
with the quality and speed provided by the automated
CNC machines. For example it takes 7 minutes to cut a
thread NC50 with the spindle rotation of 400 rpm. Thus
we achieve minimum surface roughness and precise
dimensions of the tool.
All our metal cutting tools are purchased from international
suppliers, such as Sandvik, Vargus, Iscar, Waverley
Cutting Tools etc., which guarantees excellent quality
thanks to advanced metalworking technology.
120 TON ARCTIC
POWER SWIVELS
The Power Swivels are built in Houston, USA specially for arctic
weather conditions. All the power swivel parts and units are placed
in a container carrier serving as a ini- workshop. The container has
a heating system and control panel can be placed outside for
convenience.
Power swivels are widely used for casing exits, sidetracking,
downhole fishing, workover, and other jobs worldwide. High
pressure hydraulic oil pump is activated by reliable and proven
Caterpillar diesel engine. All the fluids in the machine are specially
selected for use in cold northern conditions. Together with power
swivels we provide engineering support.
Power swivel operator-mechanic is responsible for uninterrupted
operation of the units and for availability of diesel fuel for the
pump drive.
INNOVATIVE
ADVANCED SOLUTION
WEDGECUT®
CASING EXIT SYSTEM
QUALITY
The WedgeCut® Whipstock System is one of
the advanced solutions of Wagenborg Oilfield
Services. The system consists of:
• Whip face with a setting anchor
• One mill for casing exit cutting and gauging
The innovative part of the system is the anchor setting
mechanism and the shape of the mill. The anchor is
set mechanically by shearing a slip set pin. When the
load is applied to the whip face the set pin is sheared, a
spring releases and pushes the slip up, the slip is wedged
between the whipstock and casing. However the setting
system is designed in such a way that in case of unforeseen
circumstances, such as wrong cement plug, bridge plug of
whipstock placement interval selection the whipstock can
be pulled up and set at a higher interval.
The whipstock can also be activated against the bottomhole
and then pulled up and set at a higher interval, this being
the case no cement bridge or bridge plug is required.
The
WedgeCut®
Whipstock
System is one of the advanced
solutions of Wagenborg Oilfield
Services.
When the anchor is set the mill activating pin is sheared.
Then casing milling and casing exit cutting begins. The
whip face has a special guide block which together with
the tapered section of the mill leads the mill’s cutting
structure in the right direction to cut the casing exit and
prevent its interference with the surface of the whip face.
This feature prevents the whip face from damage and
allows to use it more than once.
Besides the guide block has the shape of an inverted taper
and thus can serve as a hook for lifting the whip stock.
Which means that the whip stock can be hooked with the
head of the mill even after the mill activating pin is sheared
and the mill is no longer attached to the whipstock.
The mill itself is design to comprise a window mill,
secondary and watermelon mill in one tool. Such design
significantly lowers the cost for manufacturing or redressing
and consequently customer expenses.
The WedgeCut® system major characteristics:
• One trip casing exit cutting system
• Can be placed higher up after setting
• Can be oriented at any time
• 2 angle
• Retrievable
• Backup Feature to retrieve if the shear bolt is broken
FISHING SERVICES
We employ specialists who are fully experienced in all
aspects of Workovers and Drilling Operations such as:
• Packer milling and retrieving (all types and sizes)
• Bridge plugs milling and retrieving
• Recover liners
• Fishing (open and cased hole)
• Recovery of lost and stuck pipe, junk, lost tools
• Milling Casing, tubing, junk, cement milling,
dressing fish necks, downhole restrictions
Equipment list
• Bumper SuBs
• Die Collars
• Ditch Magnets
• Drive Subs
• Cutters
• Fishing Jars
• Fishing Magnets
• Impression Blocks
• Intensifiers
• Junk Baskets
• Junk Subs
•
•
•
•
•
•
•
•
•
Mills (all types)
Overshots
Releasing Spears
Reverse Circulating Junk
Basket
Rotary Shoes
Rope Spear
Safety Joints
Taper Taps
Washpipe
HIGH QHSE STANDARDS
ACCURATE
STABILIZER
REDRESS
MODERN EQUIPMENT
Whenever the Stabilizer has worn down to an
unacceptable diameter, it can be reconditioned
to full gauge by the Wagenborg Oilfield Services
Stabilizer Redress Shop.
Hard-Facing of blades is based on:
• Variety of Tungsten Carbide
• Matrix Hardness and ability to hold the maximum of
Carbide
Welding and Brazing Equipment installed in the
Stabilizer Redress Shop provides the capability
to perform all types of welding and brazing as
well as modifications and repair to Oilfield tools
and equipment.
Hard-Facing of Blades is achieved by using one of the
following methods:
• HF1000 - Crushed Tungsten Carbide
• HF2000 - Trapezoidal Tungsten Carbide
• HF3000 - Tungsten Carbide Inserts
The Wagenborg Oilfield Stabilizer Redress Shop is able
to redress up to 18” diameter.
Phase 1
Phase 2
Phase 3
Full Quality Control Procedures are maintained throughout
the repairing process. HardFacing techniques have been
developed to take full count on the chemical composition
of the material and the repeated redressing without
damage.Temperature Control of the body during the preheat process and throughout the complete redressing
procedure. All information obtained during the process
is recorded in the Wagenborg Oilfield Services Stabilizer
Redress Shop Card.
Redressed Stabilizers are:
• 100% Body Gauged
• 100% Magnetic Particle Inspection (MPI), or Ultrasonic
Inspected on all critical areas
DRILLING AND HANDLING
TOOLS RENTAL
WAGENBORG OILFIELD SERVICES offers a wide variety
and different sizes of drilling and handling tools rental.
The tools are manufactured by our international
partners in compliance with API standards:
• G-105, S-135 Drill Pipes
• Heavy Weight Drill Pipes
• Slick and spiral Drill Collars
• Elevators for Drill Pipe and Drill Collars, center
latch, bottleneck, side door
• Slips for Drill Collars
• Bowls for slips
• Rotary hand slips
• Safety clamps Type “T” & Type “C”
• Manual Tongs
WAGENBORG OILFIELD SERVICE
WAGENBORG OILFIELD SERVICE
WAGENBORG OILFIELD SERVICE
STABILIZER REDR
All the tools pass quality control and inspection
according to API and DS-1 specifications.
STABILIZER REDR
HF 1000
Hard-Facing of blades is based on:STABILIZER REDR
HF 1000
Variety of Tungsten
Carbide
Hard-Facing
of blades
is based on:
Matrix Hardness and ability to hold the maximum of
Carbideof Tungsten
Variety
Carbide
Hard-Facing
of blades
is based on:
Matrix Hardness and ability to hold the maximum of
Hard-Facing
of Blades
is achieved by using one of the
Carbide
Variety of Tungsten
Carbide
following
methods:and ability to hold the maximum of
Matrix Hardness
Hard-Facing
of Blades is achieved by using one of the
Carbide
HF1000methods:
- Crushed Tungsten Carbide
following
HF2000 - Trapezoidal
Hard-Facing
of Blades isTungsten
achievedCarbide
by using one of the
HF3000methods:
Tungsten Tungsten
Carbide Carbide
Inserts
HF1000
- Crushed
following
HF2000 - Trapezoidal Tungsten Carbide
The
WAGENBORG
Oilfield Carbide
Stabilizer Redress Shop
HF3000
-- Tungsten
Carbide
Inserts
HF1000
Crushed Tungsten
able
to redress
up to 18”Tungsten
diameter.
HF2000
- Trapezoidal
Carbide
The
WAGENBORG
Oilfield Stabilizer
Redress Shop i
HF3000
- Tungsten Carbide
Inserts
Full Quality
Control
are maintained through
able
to redress
up toProcedures
18” diameter.
the repairing
process. Oilfield Stabilizer Redress Shop i
The
WAGENBORG
Full Quality
Control
are maintained through
able
to redress
up toProcedures
18” diameter.
HardFacing
the
repairing techniques
process. have been developed to take f
count
on theControl
chemical
composition
of the material
and
Full
Quality
Procedures
are maintained
through
repeated
redressing
HardFacing
techniques
havedamage.
been developed to take fu
the
repairing
process.without
count on the chemical composition of the material and
Temperature
Control without
of the
body
the pre-heat
repeated
redressing
damage.
HardFacing
techniques
have
beenduring
developed
to takeprfu
and throughout
the complete
redressing
count
on the chemical
composition
of theprocedure.
material and
Temperature
Control
of
the
body
during
the
pre-heat pro
repeated redressing without damage.
All information
during
the process
is recorded
and
throughout obtained
the complete
redressing
procedure.
the WAGENBORG OILFIELD SERVICES Stabilizer Red
HF 1000
HF 2000
HF 2000
HF 1000
HF 2000
HF 3000
HF 2000
HF 3000
HF 3000
HF 3000
ENGINEERING
EXPERIENCED
CREWS
FLEXIBLE
RADIAL CUTTING TORCH TECHNOLOGY
FROM MCR OIL TOOLS LLC®
HIGH QHSE STANDARDS
MODERN EQUIPMENT
ACCURATE
The oil and gas industry is filled with
environmental and mechanical conditions that
can adversely affect your everyday operations,
costing you time and money. In many cases
traditional solutions, readily available from
industry service companies, are the answer.
Then there are those conditions that require
specialized expertise and equipment to keep
your well alive.
With a global footprint and years of experience in pipe
recovery, we can now provide the industry with the latest
Radial Cutting Torch, or RCT™ tool system services. These
enabling tools and associated services address the pipe
recovery needs of major oil and gas producers, coiled
tubing operators, and fishing service companies as
no others on the market. RCT tool systems are certified
radio safe and non-explosive. They are not classified as
explosives or traditional hazardous materials and require
no special storage or handling. Finally, a user-safe
alternative to conventional cutting methods!
Cutting NPT, costs and safety concerns
We continuously strive to deliver value to our clients
through research and development and offering a range
of modern products. RCT systems are one of the solutions
we employ to deliver value to your investment. Global
Transportation classification allows transport of the RCT
systems on public carriers, saving costs associated with the
specialized trucking and cargo requirements of chemical
and explosive-type cutters. For the client, this advantage
translates to reduced non-productive time.
Benefits
• RCT systems are all non-explosive
• RCT systems are available as hazmat or non-hazmat
rated*
• RCT systems operate in temperatures to 500˚ F (260˚ C)
• RCT systems operate in pressures to 20,000 psi (137.9
Mpa)
• RCT systems uses no explosives, detonators or igniters
• RCT systems require no special offshore transportation
• RCT systems require no special container systems
• RCT systems are certified radio safe
• RCT systems utilize MCR’s non-explosive, non-hazmat
THERMAL GENERATOR™ activator
• RCT tool cuts will not flare or swell the target pipe
• No complicated fish job
We understand the importance of personnel liability to
operators. That’s reason enough to make the RCT system your
first choice for cutting pipe.
Cutting the pipe
The versatility of RCT systems makes them a logical choice for
any tubular cutting need. Whatever the cutting conditions—
high bottom hole pressures, restricted tubular access, or even
the most routine, we have the RCT system to get the job done.
RCT tools are designed specifically to cut standard and heavywall tubular, including conventional grades, stainless, highchrome and exotic alloys, quickly, leaving a clean fish up
hole. RCT systems are available from 3/4- to 7-in. diameters
for cutting tubular sizes from 1 to 9-7/8 in.
ADVANTAGES OF THE RCT
OVER JET & CHEMICAL CUTTERS
• Not an explosive or dangerous chemical
• Classified as a Flammable Solid, Organic, NOS., UN1325
Class 4.1*
• No special storage, handling, or disposal problems
• Operates in temperatures to 500˚ F (260˚ C)
• Operates in pressures to 20,000 psi (137.9 Mpa)
• Many Deployment options available to meet client requirements
• Cuts all steel, high chrome, heavy wall and plastic coated
tubulars
• Cuts produce no flaring or swelling of the target pipe
• Can be run thru restrictions to cut larger diameter pipe
• Can be used in close contact pipe conditions
• Cuts in dry pipe conditions, exotic fluids or drilling mud
• Pressure Balance Anchor system eliminates movement,
slipping, or sticking problems associated with other anchors
• Pressure Balance Anchor also eliminates the problems
associated with going thru restrictions and operating in larger
diameters below the restriction, because it has no moving parts
• The complete system is safe to use in Radio Sensitive areas
such as offshore platforms or drill ships without going into
Radio Silence resulting in significant savings in rig time
RCT systems can be conveyed using wireline,
slick line, coiled tubing or drill string. The included
anchor system holds the tool in place during
activation and cutting, ensuring a clean and
complete cut. The slim design of the tool lets you
cut in close-contact conditions, highly deviated
wells and scaled pipe. RCT tools are proven to
operate with greater standoff. With their small
diameters, the tools can pass through, and cut
below, tubular restrictions as no other cutter can
on the market.
RCT system operation begins when an electrical
current passes through the conveyance medium
to a contact sub. The contact sub provides current
to the THERMAL GENERATOR™ activator which
heats a resistor to a temperature that causes the
initial burn that activates the primary fuel load.
Highly energized plasma is produced, exits thru
the nozzle ports and severs the target pipe in
drilling, completion and production scenarios,
within wellbore temperatures up to 500° F and
pressures up to 20,000 PSI. The torch system
is retrievable and has no special disposal
requirements.
*RCT-SP is non-hazmat rated systems currently
available.
MCR® and MCR Oil Tools® are registered trade names of MCR Oil Tools, LLC
Case study: A job required the cutting of 1 1/4-in high-pressure
coiled tubing stuck in 2 3/8-in., 5.95-lb/ft tubing. Bottom hole
temperature was 345 F, and bottom hole pressure was 11,800
PSI. After four days of failed attempts with conventional cutters, the
client called for assistance. The 7/8-in. HP RCT tool was selected
and successfully cut the pipe in the first run. The RCT system
provides access through those tubular restrictions that conventional
chemical cutters and severing tools cannot.
ENGINEERING
EXPERIENCED
CREWS
FLEXIBLE
QUALITY, HEALTH,
SAFETY & ENVIRONMENT
HIGH QHSE STANDARDS
MODERN EQUIPMENT
ACCURATE
People are at the heart of Wagenborg Oilfield
Services as our employees make our solutions
possible. Often this is done in changing and
challenging circumstances. That is why we
supply our employees with the best PPE,
equipment and working methods. It enables
them to deal responsibly with occupational
risks.
This allows us to provide first-class services, for which we
always have and will be known.
We encourage safety awareness at every level in the
company - from office to our workshop. A strong safety
culture contributes to our goal. That goal is to have all our
employees return home safely after a working day. We
pursue an active policy to prevent accidents and absence
due to illness. Together with our clients we continuously
strive to optimize working methods and improve safety.
In September 2014, Wagenborg Oilfield Services,
confirmed the compliance of the quality management
system (QMS) and threading requirements with the new
version of the specification of the American Petroleum
Institute (API) Specification Q1, Ed.9 and API Specification
7-1.
Quality is another important aspect in our company. Royal
Wagenborg’s slogan ‘Sign of Solutions’ revolves around
this - using the qualities of our employees in the best
possible way, resulting in top-level solutions that meet the
requirements of our customers.
We encourage safety awareness
at every level in the company from office to our workshop.
Apart from the human aspect, the environment is also
regarded as an important issue. We execute our activities
worldwide with respect for the environment. We recognize
our responsibility to ensure our activities have as little
impact on the environment as possible.
In the course of the audit the implementation of eighty new
requirements of specification API Spec Q1 were attested.
The 9th edition includes new requirements regarding the
safe production by analyzing the potential risks at each
stage of the production cycle. The new conditions also
apply to providing a more detailed analysis of production
and expansion of non-compliance requirements for
supplier evaluation.
OUR CERTIFICATES
DPM-DS Connections
ISO 9001
Certificate of
conformity
IQNet
API auditors noted the work undertaken in terms
of risk management in the field of quality, a high
level of readiness of the enterprise to the audit,
the professional approach of senior management
in the organization processes. As a result, API
affirmed the right of organization to use API
monogram on its products made according to
specification API Spec 7-1.
NDT Laboratory
ISO 9001
API 7-1
API Q1
MISSION & STRATEGY
OUR MISSION AND MOTTO IS
“WE FIND SOLUTIONS!”
Our Objectives and Strategy
Basing on the concepts of Royal Wagenborg,
guided by the values of the company and
meeting the challenges facing us, we are
committed to:
• gain and maintain the leading position in
providing safe, effective and high quality
solutions in the fields of drilling and servicing
or workover of the wells;
• grow our business for providing a wider
range of integrated solutions on new
markets.
OUR VALUES
HONESTY
we are honest, fair and reliable in
our dealings with customers and
employees.
QUALITY
we take full responsibility for the
results of our work and ensure
customer satisfaction.
TEAM
we attract, train and motivate
the best employees, showing
respect and encouraging open
communication.
HEALTH, SAFETY AND ENVIRONMENT
our priority - to ensure safety of
work, maintaining the health of
workers and the environment.
OUR MISSION
Providing consumers with products
and services in accordance with
their needs and quality standards
Developing reliable and efficient
solutions for our customers
Increasing in production volumes
Satisfying society requests through
the creation of new positions,
development of personnel and
protection of the environment.
WAGENBORG OILFIELD SERVICES
629800, Russian Federation
Yamalo-Nenetskiy autonomous district Noyabrsk,
Promzona, Panel 8
T +7 3496 354842
F +7 3496 354852
460027, Russian Federation
Orenburg region, Orenburg,
Donguzskaya street 58/2
T +73532913161
F +73532913162
E info.russia@wagenborg.com
www.wagenborg.ru.com
ROYAL WAGENBORG
P.O. Box 14, 9930 AA Delfzijl
Marktstraat 10, 9934 CK Delfzijl
The Netherlands
T +31(0)596 636 911
E info@wagenborg.com