TERMS OF SALE
NO WARRANTIES: Every item and lot in the “Auction” is sold: (a) “AS IS, WHERE
IS, AND WITHOUT RECOURSE,” and (b) with no warranties, guarantees or
representation of any kind or variety, whether expressed, implied or otherwise.
PAYMENT: A 10% buyer’s premium applies to the purchase price of all on-site
purchases. Cash or certified funds required in full at the time and place of auction.
Non-certified checks will NOT be accepted unless accompanied by a valid bank
letter of guarantee, which must be in the following format: This bank guarantees
payment to Michael Fox International from (name of customer) on account
#_________ up to the amount of $______. This letter is valid for purchases at
the auction held at Parker-Hannifin on Thursday, September 5.
AUCTION SITE
INSPECTION
Wednesday, September 4 from 10:00 A.M. to 4:00 P.M. or by appointment.
DIRECTIONS
From Des Moines International Airport: Exit airport onto Fleur Drive. Turn right
onto Fleur Drive. Turn left onto Army Post Road (Route 5). Turn left (north)
onto 14th Street (Route 69) to I-235 East. I-235 East becomes I-35 North. Drive
approximately 55 miles to Exit 142, Route 20 East (towards Waterloo). Turn
right onto Route 65 (south). Turn left onto Route 175 to auction site.
AIRPORT
AIRPORT & TRANSPORTATION
The area is served by the Des Moines International Airport, approximately
90 miles southwest of the auction site.
OVERNIGHT ACCOMMODATIONS
Ames:
Best Western...............................................................................(515) 232-9260
Holiday Inn...................................................................................(515) 292-8600
Marshalltown:
Best Western...............................................................................(515) 752-6321
Comfort Inn.................................................................................(515) 752-6000
INFORMATION PROVIDED IS BELIEVED TO BE ACCURATE, BUT IS NOT GUARANTEED
LEASING INFORMATION
PRE-APPROVED LEASE/FINANCE CREDIT LINE AVAILABLE
In order to establish a lease/finance credit line for qualified purchasers that can be used for
purchases at this or future Michael Fox International auctions, please contact...
Horizon-Keystone Leasing Services
John Messersmith
Phone (800) 514-2323 • Fax (800) 606-0037
The auction bidder must provide Michael Fox International, Inc. with a letter from the lease/finance
company in the following format: The lease finance company ________ guarantees payment to Michael
Fox International, Inc. on a non-contingent basis for purchases at the auction of Parker-Hannifin on
Thursday, September 5.
COMPLETE MACHINE SHOP
FIRST CLASS MAIL
0EXECUTIVE OFFICES
11425 CRONHILL DRIVE, OWINGS MILLS, MARYLAND 21117
(410) 654-7500 • (800) 722-3334 • Fax (410) 654-5876
NORTH AMERICA OFFICES
CALIFORNIA, CANADA, FLORIDA, MARYLAND, MASSACHUSETTS, NEW YORK, TEXAS
INTERNATIONAL OFFICES INCLUDING
UNITED KINGDOM, AUSTRIA, BELGIUM, GERMANY, POLAND, TURKEY, CHINA,
INDONESIA, KOREA, PHILIPPINES, SINGAPORE, MALAYSIA, THAILAND
www.industrialauctioneers.org
http://www.michaelfox.com
e-mail: info@ michaelfox.com
ELDORA, IOWA
THURSDAY, SEPTEMBER 5
AT 10:00 A.M.
IP-2144230
POSTMASTER: Dated Material.
Please Deliver Promptly.
Presorted
First Class Mail
U.S. Postage
PAID
Eugene, Oregon
Permit No. 305
COMPLETE
MACHINE SHOP
CINCINNATI MDL. 300T-1000 CINTURN CNC LATHE, S/N 05320U1294-0043
GoIndustry Group
• CNC TURING CENTERS
• CNC VERTICAL
MACHINING CENTERS
• CNC LATHES
• CNC VERTICAL
TAPPING CENTER
• ACME SCREW MACHINES
• CHUCKERS
• LATHES
• MILLS
• GRINDERS
SURPLUS TO THE CONTINUING OPERATIONS OF
PARKER-HANNIFIN
1505 21st STREET
ELDORA, IOWA
(APPROXIMATELY 90 MILES NORTH OF DES MOINES)
THURSDAY
SEPTEMBER 5
AT 10:00 A.M.
>
ENSHU MDL. DTCL
CNC VERTICAL
MACHINING CENTER,
S/N 186
http://www.michaelfox.com
e-mail: info@michaelfox.com
NORTH AMERICAN OFFICES: CALIFORNIA, CANADA, FLORIDA, MARYLAND,
MASSACHUSETTS, NEW YORK, TEXAS
CNC VERTICAL
MACHINING CENTER
JIG BORER
ABA Mdl. VL-600 Jig Borer, s/n 387, 16 x 28 table.
ENSHU Mdl. DTCL CNC Vertical Machining Center,
s/n 186, Fanuc OM control, twin pallet 16 x 19 each.
LATHES
HARRISON Mdl. M350 Lathe, s/n 35116/1122, hard ways,
Acu-Rite DRO, 1-1/4" spindle hole, 40–2,200 RPM,
threading, 10" 3-jaw chuck, Buck 12" 4-jaw chuck, taper
attachment, tool post, tailstock, 15" x 40", 7.4 hp.
CNC TURNING CENTERS
YAM Mdl. CNC-CK-2 CNC Turning Center/Chucker,
s/n 102038, Fanuc 6T control, collet chuck, 8-position
turret tool holder, coolant.
YAM Mdl. CNC-CK-2 CNC Turning Center/Chucker,
s/n 102063, Fanuc 6T control, collet chuck, 8-position
turret tool holder, coolant, bar feed.
PROFIT MASTER Mdl. 17X18 Gap Bed Lathe, 20–2,000
RPM, 2-3/8" spindle hole, threading, 16" 4-jaw chuck,
10" 3-jaw chuck, taper attachment tailstock, steadyrest,
4-way tool post.
ACME MDL. RB-8 3-1/2" SCREW MACHINE
CLAUSING-COLCHESTER Mdl. 600/VS12 Lathe,
s/n 23/0003/00056DD, hard ways, threading, Acu-Rite
“Turnmate” DRO, 6" 3-jaw chuck, 60–2,500 RPM, taper
attachment, tool holder, tailstock, coolant.
MYSORE KIRLOSKAR Mdl. EL-2 Turret Lathe, s/n 1705,
14 x 42, 112–1,250 RPM, 6-position turret, collet chuck.
MILL
WELLS INDEX Mdl. 747 Vertical Mill, s/n 19219, 1-1/2 hp.,
Acu-Rite “Millmate” X-Y DRO, 50–4,200 RPM, 9 x 46
table, lube, table power feed, ram-type swivel head.
SHOUN/DYNASTAR MDL. K30YX8 CNC LATHE, S/N K820018
ACME MDL. RB-6 2" SCREW MACHINE
MULTI-SPINDLE
SCREW MACHINES
ACME Mdl. RA-6 1", Maple PLC control.
ACME Mdl. RB-6 2", rebuilt 12/1994, 6-spindle barfeed.
THURSDAY
SEPTEMBER 5
AT 10:00 A.M.
ACME Mdl. RB-6 2", chip conveyor.
ACME Mdl. RA-6 1-1/4".
CHUCKERS
HARDINGE MDL. HC CNC OMNITURN LATHE, S/N HC-4499-8
CNC LATHES
CINCINNATI Mdl. 300T-1000 Cinturn CNC Lathe,
s/n 0532OU1294-0043, chip conveyor, Acramatic 850-SX
CNC control, tailstock, 8-position turret tool holder.
DYNASTAR Mdl. K30YX8 Dynastar 350 CNC Lathe,
s/n K820018, chip conveyor, Fanuc 6T control, 12" 3-jaw
chuck, tailstock, 12-position turret tool holder.
HARDINGE Mdl. HC CNC Lathe, s/n HC-4499-8,
retrofitted, Omniturn CNC/slide OS-1 No. OT-CNC
control, s/n 1585G2.
ACME Mdl. RB-8 2-5/8" Chucker, 8-spindle barfeed.
ACME Mdl. RB-8 3-1/2" Chucker, 8-spindle barfeed.
ACME Mdl. RB-6 4" Chucker, 6-spindle barfeed.
ACME GRIDLEY Mdl. HSC6, s/n H-58274, 2-3/8"
chip conveyor.
ACME GRIDLEY Mdl. HSC6, s/n H-58309, 2-3/8"
chip conveyor.
ACME GRIDLEY Mdl. HSC6, s/n 58335, 2-3/8"
chip conveyor.
ACME GRIDLEY Mdl. HSC6 Chucker, s/n H58313,
2-3/8" chip conveyor.
ACME MDL. RA-6 1" CHUCKER
ACME GRIDLEY MDL. HSC6 CHUCKER, S/N H-58274
ACME GRIDLEY MDL. HSC6 CHUCKER, S/N H-58309
CNC MILLS
MAHOE Mdl. MH-400E Vertical CNC Mill, s/n 42475, 9-1/2
x 31 table, CNC No. 432 control.
MIYANO Mdl. TSV21 Vertical CNC Mill, s/n TSV210222,
Fanuc OM control, enclosure, 5 hp. main motor, 10-position
turret tool holder, 8-1/2 x 20 table.
Exclusive rigging rights have been assigned for this auction.
The rigging process will be noted in the auction catalog.
For a catalog, contact auctioneer or visit auctioneer’s website,
www.michaelfox.com
MAHOE MDL. MH-400E CNC VERTICAL MILL, S/N 42475
DRILL SHARPENER
WALTER/CHRISTEN Mdl.
1-32/100A Drill Sharpener, s/n 3901.
CHIP SYSTEM
CMI Brass Chip System.
SAW
RAMCO Mdl. RS-90P Metal Band
Saw, s/n 21608, 1" blade.
PLASMA
CUTTER/WELDERS
THERMAL DYNAMICS Mdl. 6040
Plasma Cutter,
s/n A41608A185110A, DRO.
MILLER Welder, s/n JA406628,
arc-type.
MILLER Mdl. MP-30E TIG Welder,
s/n HK322921, DC/TIG, wire
feed unit.
PRESS
CLAUSING Mdl. 2277 Pedestal
Drill Press, s/n 524587, 1-1/2 hp.,
150–2,000 RPM, 15" x 18" table.
AIR COMPRESSOR
GARDNER-DENVER Mdl. ElectraSaver II Rotary Screw-Type Air
Compressor, s/n 23973, 100 hp.,
41,166 hours, water cooled, sound
enclosure, skid-mount.
FORKLIFTS
HARRISON MDL. M350 LATHE, S/N 35116/1122
CLARK Mdl. TM15S Fork Truck, s/n TM2470849-755FB, 722 hours, 3-wheel, sideshift, hard
tire, 2-stage, 34" forks, 2,750-lb. cap., electric,
128" max. lift, charger.
CLARK Mdl. TM15S Fork Truck, s/n TM2470848-755FB, 6,078 hours, 3-wheel, sideshift,
hard tire, 2-stage, 34" forks, 2,700-lb. cap.,
electric, 128" max. lift, charger.
CLARK Mdl. GCS-15 Fork Truck, s/n GCS1271764-7228, propane, 2,400-lb. cap., 128" max.
lift, sideshift, 9,890 hours, 42" forks.
CRANES
CONCO 5-Ton 38' Span Bridge Crane, s/n 9919,
remote control, dual beam, top running.
Jib Crane, 360°, 1/2-ton cap., Coffing 1/2-ton
chain hoist, 10' arm, floor-mount.
PROFIT MASTER 17" x 18" GAP BED LATHE
DAYCO 1/4-Ton Pole-Mount Jib, w/hoist, chain
hoist, 10' arm.
BALER
PIQUA Cardboard Baler, 30 x 60 x 72, hydraulic,
down acting.
MISCELLANEOUS
CLARK MDL. TM15S FORKLIFT, 2,750-LB. CAP.
PNEUMATECH Mdl. PCA-4000 Refrigerated
Water Chiller, s/n 9807-C0129661-004508,
4-fan, 40-ton, 40 hp., 75 PSIG, DRO temperature
control, skid mount.
AGET Mdl. 30N51-0 Dust Collector, bag-type.
RIDGID Mdl. 300-T2 Pipe Threader, s/n
ED23067C95.
CLAUSING-COLCHESTER MDL. 600/VS12 LATHE
GRINDERS
K.O. LEE Mdl. 5918GADRE Surface Grinder, s/n 20952MM,
8 x 18 hydraulic wheel dresser, permanent magnetic chuck,
pedestal control.
HAMMOND Mdl. N014 Bull Grinder, s/n 5244, dual lights,
dual shields, 3 hp.
DUNORE Mdl. 8526 Tool Post Grinder, s/n 57-031.
SENECA FALLS Mdl. R10 Relief Grinder, s/n 25R01346.
LEON BARRET Aluminum Spinner.
PRECISION METAL WORKS Mdl. 110 Parts
Washer, s/n WK2258-9-97.
PRECISION METAL WORKS Mdl. 110 Parts
Washer, s/n WI-1168.
PRI Mdl. PROVAC 100 Solvent Reclaim/PRI,
DRO, 27,860 hours, Omron processor.
SIMCO Oil Reclaim, s/n DL-275XL, PLC control,
liquid/solid separator, filter, (2) tanks.
CECOR Mdl. SA5-140PF-S Sump Cart,
s/n 31463.
DEE BLAST Mdl. 44 Bead Blaster, 28"D. x 44"W.
x 18"H.
Large Quantity of Deburring Units; Chop Saws;
Workbenches; Testers; Spare Parts; Parts
Baskets; Tubs; Plastic Totes; Miscellaneous
Racking; Office Furniture and Equipment.
CLARK MDL. TM15S FORKLIFT, 2,700-LB. CAP.
K.O. LEE MDL. 5918HGADRE SURFACE GRINDER,
S/N 20952MM
SOME ITEMS SUBJECT TO PRIOR SALE
A 10% BUYER’S PREMIUM APPLIES TO ALL ON-SITE PURCHASES