4th Annual
CABIN FEVER ANTIQUE TOOL AUCTION
February 2, 2013, 9:30 AM
Harvester Lions Club
4835 Central School Rd.
St. Charles (St. Louis), Missouri 63304
001._____ Unusual homemade plow plane made of brass plates and steel rods and
fasteners, interesting.
002._____ Marples Ultimatum brace made of rhino horn, in rough condition with
improper pad, can be restored.
003._____ Early European horn plane with nicely carved throat, nice chip carving on top
of toe, the horn is a later replacement.
004._____ Ohio Tool Co. No. 101 screw-arm plow plane with crack on one of the big
nuts and missing one of the inner nuts, has plane-shaped logo on toe, nice threads,
very good overall, with set of six blades not shown in photo.
005._____ Three wooden planes: a continental 24 1/2-inch wooden jointer plane with
piece of leather on top near toe, very good overall; plus a 16-inch A. HOWLAND
wooden jack plane, handle has been repaired, nice overall condition; and a
continental screw-arm plow with a number of bug holes, good overall.
006._____ Nice ARCHER LONDON dovetail saw, complete and very good; plus a C.E.
JENNINGS 12-inch cast iron double plumb and level with both plumb vials broken
out, intact level vial and one corner chip on the top rail.
007._____ Stanley #12 1/2 scraper plane with rosewood sole, STANLEY marked blade,
very good overall.
008._____ Large wedge-locking slitter gauge marked S.KNIGHT JR. on one side of
head, very good overall.
009._____ Pair of wooden planes: 20-inch French or German jointer plane with tapered
STEINER iron, fine overall; and an 8-inch wooden smooth plane, complete and
very good.
010._____ Stanley #45 combination plow plane with SW logo on skate; early style cam,
adjustable fence, needs two depth stops, slitter and blades to complete.
011._____ Wooden mallet and a nice DUNLAP drawknife in fine overall condition.
012._____ Wooden stair saw, looks like a Disston but there is no maker's marks visible,
fine overall.
013._____ Pair of gauges: one a beech marking gauge complete and very good; and a
marking and mortise gauge that is missing the brass rub block but is otherwise very
good.
014._____ L. COES Patent 10-inch monkey wrench, complete and very good.
015._____ IBBOTSON, PEACE & CO. EAGLE WORKS SHEFFIELD, ENGLAND,
open handled, brass-backed saw, 12-inch blade, traces of surface rust, will clean to
very good overall condition.
016._____ Stanley #55 combination plow plane with original center bottom tower, the
right handle is broken and missing the wooden portion, only one blade included,
can be restored to usable condition.
017._____ E. PRESTON TRADE MARK wedge-arm plow plane, thumb operated depth
stop, brass stiffener plate on skate, very good overall with 7 plow blades or irons.
018._____ CRESCENT No. 56 SUREGRIP nail puller, complete and fine.
019._____ Early Style (Type I or Type 2) Stanley #113 compass plane, the backing plate
was broken off and the rear handle went with it, good for parts (lever cap,
decorative knobs, blade, chip breaker, body and flexible sole which are all very
good.
020._____ Stanley #71 router plane Type 2? with japanned body, has patent date in a ring
on top of base, all marked with STANLEY and NO 71 in base, fine beaded knobs,
one 1/2-inch blade included.
021._____ Nice Stearn's Patent (March 5, 1878) adjustable hollow auger, with intact
depth stop, complete and fine.
022._____ Lot: primitive deck or paint scraper; cast iron file holding handle with a
soldering iron in it; and a wooden handled screwdriver.
023._____ Two adjustable nut wrenches: PS&W 8-inch wooden handled monkey
wrench; and a 9._____25-inch twist handle in very good overall condition.
024._____ Nice little 4-inch brass-back dovetail saw, complete and fine.
025._____ Pair of saw vises; one a Potter Patent (AUG. 22, 1899) has a steel guide
screwed onto the back; the other is marked 94 and is bone stock.
026._____ Small jeweler or watch maker's caliper with brass scale, very good overall.
027._____ GOLDENBERG ACIER FONDU 9 1/2-inch horn plane, complete and very
good.
028._____ Whetstone carrier made of wood. These were carried on the belt by worker
who were in the field harvesting. When they would hit a rock and nick the scythe
blade, they would bang it out on a small anvil and re-sharpen the scythe with the
whetstone that was carried in this carrier. Fine overall condition.
029._____ Japanese sumitsubo or ink pot reel, these were used by Japanese craftsmen to
mark layout lines, similar to the chalk line used in the west, complete and very
good.
030._____ Osborne Patent leather slitter with brass body stuffed with rosewood,
complete and fine.
031._____ Unusual pump drill with mahogany flywheel, leather straps, very good
overall.
032._____ Nice E. RICHARDSON moving fillister plane with screw-operated depth
stop, intact nicker, very good overall.
033._____ Three wooden planes: two continental? rabbet planes, both very good; and a
nice unmarked 7/8-inch dado with screw-operated depth stop, fine overall.
034._____ Lot of five wooden molding planes: 1/4-round continental hollow; Ohio Tool
5/8-inch rabbet; R&C. CARTER TROY; etc.
035._____ Fine wooden wheelwright's jarvis with brass bottom, WARD iron, a really
nice showy piece.
036._____ Primitive Archimedes-type drill likely from the Pacific rim, very good.
037._____ Homemade walnut screw box, very well made.
038._____ C.A. MANN PATENT screw-holding screwdriver, complete and fine; plus a
Stanley #? clapboard siding gage, very good.
039._____ Nice turning caliper/sizer, fine overall condition.
040._____ Unusual wooden router plane, body marked with owners initials but no
makers name, iron marked SORBY, very good overall.
041._____ Unmarked Stanley #77 rosewood marking and mortise gauge, complete and
very good.
042._____ Stanley #67 Universal spoke shave, complete with fence and both bottoms,
fine overall.
043._____ AMERICAN SCROLL SAW, DELTA SPECIALTY CO. MILWAUKEE
hand cranked scrool saw, missing the hand crank, otherwise very good.
044._____ PS&W No. 72 nutcracker, mounted to a piece of wood, very good overall.
045._____ Stratton Bros.? No. 2, 28-inch brass-bound plumb & level with mahogany
stock, very good overall.
046._____ DAVIS LEVEL & TOOL CO. 24-inch cast iron inclinometer level with fancy
filigree, brass dial is missing the small pointer and one corner of the bottom rail is
chipped, 2 9/16-inch tall frame, good overall.
047._____ C.E. Jennings 24-inch cast iron double plumb & level, all three vials intact,
very good overall condition.
048._____ Cooper's or carriage maker's drawknife, very good overall.
049._____ Pair of 2-speed breast drills one with a iron D-handle on top of frame; the one
on top was sprayed with clear lacquer, good overall.
050._____ Iron portion of a barn beam boring machine, including one bit.
051._____ Combination pipe and nut wrench missing the pivoting pipe grip from the pipe
side; and a nice Rusby Patent drill/brace, complete and very good.
052._____ Lot: 29-inch pry bar with wooden handle; rasp with nice wooden handle; and
a dense and heavy mallet made of iron wood or something similar.
053._____ Lot: bearing scraper; Perfect Handle-type screwdriver; and a triangular reamer
with wooden handle.
054._____ ENTERPRISE No. 33 ice shaver, PAT JULY 4, '93, very good overall.
055._____ GOODELL-PRATT combination set, level vials are out on the square and
protractor heads; good overall; plus a double bladed spokeshave with flat and
hollow bottoms.
056._____ Cooper's croze with wooden body and steel blade holder, complete and very
good.
057._____ Board rule used by lumbermen to calculate the board feet in a log.
058._____ Stanley #240 sliding inside measure that measures up to 4 feet, very good.
059._____ FIRE GUN NO. 2 brass fire extinguisher, complete and very good.
060._____ Unusual European brace that takes bits with flat tangs, very good overall, plus
a body of a coachmaker's router that someone was trying to build.
061._____ Marbles Mfg. Gladstone Michigan patented (U.S. No. 604,624) safety hatchet
with folding blade guard, made on a patent issued May 24, 1898 to Webster L.
Marble of Gladstone, Michigan, this one is fine.
062._____ Replica American Indian tomahawk with leather wrapped handle, with flint
head.
063._____ RABONE No. 1193 boxwood 4-fold rule with protractor head and level, one
leg appears to be warped, very good overall.
064._____ CHAPEN STEPHENS CO. NO. 036 combination rule, level, bevel, some
mild pitting on the blade, very good overall.
065._____ Unusual 54-inch sliding inside/outside measure similar to a zig-zag rule, PAT.
7/29/13; 11/2/15; 12/24/18.
066._____ RARE ivory tool handle full of bits, there is no indication of who made
this one but it is the same form as a Bridgeport or any of a dozen other U.S.
makes, but we suspect this one was made in the UK.
067._____ Unusual wooden mallet with brass bands around both ends of the head.
068._____ Stanley #36 1/2 caliper rule, complete and very good.
069._____ SHAW & SONS PATENT LONDON rosewood handled glass cutter, plus a
mystery tool with unusual handle, and a lever-type saw set.
070._____ Very ornate yet functional padlock, looks to be eastern or middle eastern in
origin, fine working condition with original key.
071._____ Pair of decorative heavy duty copper or copper washed hinges, very nice.
072._____ Nice FRENCH glass cutter made of brass, handle unscrews to reveal a small
screwdriver, very good overall.
073._____ Interesting padlock similar in style to #70 above, this one is made of steel,
very good overall.
074._____ Small pocket level that can be attached to a square, has brass top; plus a brass
glass cutter marked BRITISH MADE, has handle that unscrews to reveal a small
screwdriver, very good overall.
075._____ Fantastic TUCKER & REEVES PATENT padlock with key in working
condition, heavy brass body, very unusual.
076._____ Nice wooden framed turning saw, complete and very good.
077._____ Shipwrights type gutter adz with pole, the pole has been mushroomed out a
bit, but the adz and handle are fine.
078._____ Pair of two-man crosscut saws: a complete 6-foot model and a 5-footer that
only has one handle.
079._____ Three Stanley levels: 24-inch #1, both vials intact, very good overall; No. 324
GENUINE CHERRY 24-inch mason's level, fine; and a #00 22-inch, very good
overall.
080._____ Lot of four hand saws: Disston No. 7; Disston (faint etch); unknown make
with small screws securing handle; and SIMOND MFG. Estab'd 1832, No. 1/2 with
crescent moon logo on etch and medallion, handle has been repaired, very good.
081._____ Pair of wooden levels: 20-inch Stanley with early circular logo, intact vial,
will clean to very good; and an unusual ELDER ANGLE LEVEL PAT 6-2327, mason's type, all three vials intact, very good.
082._____ Pair of hand saws: Keen Kutter 9 TPI, small chip from bottom of handle spur,
very good; and a Keen Kutter 8 TPI blade, very good overall.
083._____ Pair of wooden levels: Disston & Sons 30-inch plumb & level with intact
vials, very good overall; and a Stanley #30 double plumb & level with big brass
plumb vial covers on one side, all vials intact, very good overall.
084._____ Pair of hand saws: Keen Kutter No. 88 with 7 PPI blade, very good; and a
Disston & Sons No. 7 with extra long 28-inch blade, scuffed but intact handle,
needs light cleaning.
085._____ Pair of Stanley wooden levels: 28-inch No. 3 with intact vials, brass end
plates, early circular logo with patent dates, very good overall; and a 26-inch No. 3
that needs the wood refinished, vials intact, good overall.
086._____ Pair of handsaws: Keen Kutter K24, complete a and very good; and a fine
George Bishop No. 16 with 8 ppi blade, fine etch, very good overall.
087._____ Pair of wooden Stanley levels: 14-inch No. 102 SW, complete and very good;
and a 12-inch No. 104 both vials intact, very good overall.
088._____ Pair of 20-inch handsaws: early Keen Kutter with axe head logo on medallion
and nice etch on blade, top handle spur MIA, very good; and a KEEN KUTTER
No. 88, very good overall.
089._____ Lot of seven FORD wrenches: lug with socket; double open ender 9N17014
graduated in inches; M01A-17017B offset box end; lug wrench with hex opening
just below the open end; M-40-17017; screw adjust nut wrench with square end on
handle; and a pair of pliers, all very good or better.
090._____ Henry Disston & Sons 26-inch back saw, complete and very good; plus an old
miter box that the saw can likely be used in.
091._____ Lot of five FORD wrenches: #42 lug; M-40-17017 lug?; 01A-17017B 70;
01A-17017BM37; T-1387 screw adjust; and pair of pliers, all very good or better.
092._____ Disston & Sons No. 7, 28-inch rip; and an ATKINS 22-inch.
093._____ Lot of FORD wrenches: M-40-17017 lug?; and five double open ended
wrenches, all good.
094._____ ORR & LOCKETT HDW CO. RACEY panel saw with 9 PPI blade, nice etch
and fine handle, fine overall.
095._____ Six ratcheting bit braces including: Millers Falls; No. 32 Millers Falls; another
Millers Falls; PEXTO No. 110; John S. Fray & Co.; & PS&W.
096._____ Unknown make corner brace, complete and very good.
097._____ Six ratcheting bit braces including: HSB & Co. (rusty); C.E. JENNINGS &
CO.; Consolidated Tool Wks; No. 1908; etc.
098._____ DIAMOND EDGE DEC10 corner brace with nice handles, very good overall.
099._____ Lot of 12 assorted rafter or framing squares.
100._____ Wooden carpenter tool chest 14 x 35 x 12 1/2 inches. Has a compartment or
tray in the lid that needs latch work to keep it closed when the lid is lifted, three
tills, folding iron handles on each end, includes an old Richardson hand saw and
part of an old drafting set.
101._____ Winchester single bit axe, very good overall.
102._____ LAKESIDE No. 42 double bit axe, handle chipped a bit where it goes into
head, very good overall.
103._____ Winchester single bit axe, some minor pitting, very good overall.
104._____ Keen Kutter single bit axe with former owner B.M.'s initials in series of dots
below the Keen Kutter name, very good overall.
105._____ Lot of 9 assorted rafter or framing squares including the EAGLE SQUARE
one on top.
106._____ Pair of iron smooth planes: SHELTON No. 04, complete and very good; plus
a Stanley BEDROCK No. 604 that someone has attempted to make a
patternmaker's plane out. It has a keyhole shaped hole in the bed behind the frog,
still in good usable condition.
107._____ Wooden handled T-auger with nice 2-inch bit; and a Millers Falls No. 120 2speed breast drill, has a carriage bolt where the set screw for the stock would go,
otherwise good usable condition.
108._____ Three Stanley smooth planes: #3 with S casting in bed, Q-logo blade, tote spur
missing splinter, nice knob, will make great user; #4C with two patent dates in bed,
tote broken in middle and missing spur, good overall; and a #4 with Q-logo blade,
tote glued in center, very good overall.
109._____ Two wooden handled T-augers; one with 2-inch bit and one with 3/4-inch
blade; plus a Millers Falls 2-speed breast drill, missing the original level and the
auxiliary handle, good overall.
110._____ Lot of three smooth planes: Stanley #3C Type II with fine AA logo blade,
nice rosewood tote and tall knob, fine overall; Sargent #408, complete and fine; and
a SHELTON No. 04, complete and very good.
111._____ Stanley No. 42? 4-foot mason's level, complete with iron plumb bob, very
good overall.
112._____ Pair of 18-inch fore planes: Stanley #6 Type 11, with good low knob, tote spur
MIA, will clean to good usable condition; and a FULTON #6C with nice rosewood
tote and beaded knob, good FULTON iron, almost no japanning remains in bed,
will make good user.
113._____ Extra long cooper or mast maker's drawknife with 17-inch blade, one handle
split and loose, good overall.
114._____ Early 28-inch Stanley No. 10 with laminated mahogany stock, square side
views, brass corners, very good overall.
115._____ Nice 32 1/2-inch turnscrew or screwdriver, likely from England, clean and in
fine overall condition.
116._____ Three 28-inch wooden levels: Stanley #30 double plumb and level with big
brass plumb vial covers, all vials intact, very good overall; early Stanley No. ? with
brass end plates, brass side views, both vials intact, stock needs refinishing; and an
early Stanley 29-inch No. 0?, with dry level vial, plumb intact, big hang hole in one
end, good overall.
117._____ Unusually heavy 12-inch steel dividers with removable legs, each leg held by
a decorative thumb screw, missing the locking screw, very nice.
118._____ Pair of outside calipers with compression joints, the larger one is a
STARRETT, the smaller one is marked SPENCER which was likely an owners
name, both very good.
119._____ Two pair of dividers; the one on the left is 10-inches, it is unmarked but
appears to be early; the one on the right is by PS&W and has removable points,
very good.
120._____ Lot: Starrett 12-inch inside/outside calipers; 9 1/2-inch outside caliper, and
three small spring calipers and dividers. Five pieces in all, and all are very good.
121._____ Lot of three smaller calipers and dividers with integral springs; and a
SCHOLLHORN PATENT (U.S. #51,967) unusual outside caliper made on a patent
issued Jan. 9, 1866, all very good.
122._____ Four dividers by PS&W, one mark too faint to read, the smallest pair by
Sargent, all very good.
123._____ Lot dividers; small inside/outside caliper; hermaphrodite caliper; and a
Starrett inside/outside caliper with fine adjust, all very good.
124._____ Stanley #45 combination plow plane in original wooden box, with 21 blades
including the slitter, the round knob has stripped threads and needs to be replaced,
all needed are the three depth stops, beading stop, screwdriver and cam, a good
usable plane.
125._____ Pair of 26-inch wooden levels: AKRON No. 90 by The Baker McMillen Co.
Akron Ohio, all three vials intact, very good overall; and a Stanley No. 3 with intact
vials, good overall.
126._____ Stanley BEDROCK No. 608C RT iron jointer plane, fine rosewood tote and
low knob, R&L CO. BEDROCK lever cap, only about 1/3-inch usable length left in
iron, very good overall.
127._____ Stanley No. 8C iron jointer plane, tote spur MIA, good low knob, very good
overall.
128._____ Stanley NO. 7C iron jointer plane, tote spur MIA, good low knob, very good
overall.
129._____ Stanley NO. 6C Type 11 iron fore plane, owner B. SHUMACHER tastefully
stamped his name into one side of the fine rosewood tote, fine V-logo blade, very
good overall.
130._____ Pair of iron bench planes: Stanley #5 iron jack plane with broken rosewood
tote, good knob, Q-logo iron, very good overall; plus a WWII vintage Stanley #4
1/2C with hard rubber adjuster nut, fine stained tote and tall knob, the front corner
is chipped, but it will not affect its function.
131._____ Pair of TYPE 11 Stanley smooth planes: #4C with nice V-logo iron, fine
rosewood tote and low knob, very good overall; and a #3 with fine rosewood tote
and low knob, good V-logo iron, very good overall.
132._____ Stanley #31, 24-inch transitional jointer plane, fine Q-logo blade, nice beech
tote and knob, very good overall.
133._____ Pair of 20-inch transitional fore planes: Stanley #129 Liberty Bell, missing a
chunk from the top left side of the stock, good Q-logo iron, tote broken and missing
part of spur, good; and a Stanley #29 with broken tote, good knob, good overall.
134._____ Three transitional bench planes: Stanley #28, good Q-logo iron, tote broken
and glued, good overall; Sargent #3415, complete and very good; and an unusual
Ohio Tool #026, tote spur MIA, very good overall.
135._____ Stanley #35 transitional smooth plane, Q-logo blade, very good overall.
136._____ Stanley #135 Liberty Bell transitional smooth plane, tote broken and glued,
very good overall.
137._____ Stanley BAILEY #35 transitional smooth plane, fine V-logo iron, tote broken
and glued, fine overall.
138._____ Pair of transitional smooth planes: Stanley #24 prelateral with eagle logo on
toe, good T-logo blade, has had a piece of wood applied to sole to close throat, very
good overall; and a No. 122 Liberty Bell that is complete and fine.
139._____ A. HOWLAND & CO. handled screw-arm plow plane, nice round finials on
arms, screw operated depth stop, comes with set of four Sandusky blades, very
good.
140._____ The Chronicle EAIA bound VOLS 1 through 11, November 1933 to
December, 1958. Compiled by the Early American Industries Association in 1976,
complete and fine.
141._____ Greenfield Tool Co. No. 528 unhandled plow plane, with set of six Greenfield
plow blades, there are numerous chips to the threads and arms, with new arms from
a donor, it will be fine.
142._____ PTAMPIA (Patented Transitional and Metallic Planes in America VOL 1 by
Roger K. Smith, the seminal work on patented planes, this volume was never
offered with a dust cover, this one is signed by the author and is complete and fine.
143._____ BENSON & CRANNELL ALBANY, NY wedge-arm plow with five irons,
four irons are by T. HILDICK, a fine plane overall.
144._____ Book With Hammer In Hand by Charles Hummel. This hardbound book
contains the story of the Dominy Craftsmen of East Hampton, New York. The
Dominy shop and its tools now reside in the Winterthur Museum. A fine book
overall, no dust jacket.
145._____ W. GILPIN 1944 hatchet, complete and very good.
146._____ Wooden Planes in America by Kenneth D. Roberts, complete with dust cover,
a fine book with a tatty dust cover, and a previous owner has written ROBERTS
name on the page ends, very good overall.
147._____ PLUMB broad hatchet with anchor logo, very good overall.
148._____ Pair of tool books: The Antique Tool Collector's Guide to Value by Ronald S.
Barlow, some wear near spine good paper covers; plus a hardbound copy of The
Garrett Wade book of Woodworking Tools by Garry Chinn and John Sainsbury,
fine book and dustcover.
149._____ Two paper covered books: American Tools by Buck & HIckman reprinted by
the Midwest Tool Collectors Association in 1989; and an original Tools and
Accessories catalog of RICH-CON tools by Richard & Conover, some writing on
cover, good overall.
150._____ PLUMB lathing or roofing hatchet with stop and what appears to be the
original handle, complete and fine.
151._____ Unknown make drawknife with 12-inch blade, faint maker's mark, very good
overall.
152._____ PLUMB tomahawk-type camp hatchet, complete and very good.
153._____ Nice cooper's shave with D.R. BARTON blade, nice wooden handles, very
good overall.
154._____ Unmarked KELLY? broad hatchet, complete and very good.
155._____ Wooden bevel with 16-inch blade, 20 1/2-inches long overall, very good.
156._____ C.H. HAMMOND PHIL'A broad hatchet, a few small chips from edges of
hammer face, good overall.
157._____ Pair of folding handle drawknives: Unknown make with 10-inch curved blade,
one handle loose, good overall; and a nice A.J. WILKINSON with 7-inch blade,
very good.
158._____ BRIDGEPORT Boy Scout hatchet with iron handle sandwiched with two
pieces of wood, very good overall.
159._____ Unusual hand forged? inshave, very good overall.
160._____ Winchester roofing? hatchet with hammer head on back, very good
overall.
161._____ Nice wooden calking mallet with iron rings around each end of the head, very
good.
162._____ Nice RABONE CHESTERMAN 33-foot gauging tape and reel with 4-inch
brass weight, complete and fine.
163._____ Lot of four outside calipers; the largest is an L.S. Starrett, it measures to 32
inches; and the smallest is a Starrett May 21, 1889 Patent with fine adjust that
measures to 9 inches. The two smaller ones also have locking nuts, all are in very
good usable condition.
164._____ Three machinist tools: 16-inch inside/outside caliper; outside caliper that
measures to 24-inches; and a Starrett Patent outside caliper with locking joint.
165._____ Outside caliper that measures to 20 inches; plus a violin caliper marked with a
New York maker's mark, some light rust that will need to be cleaned to reveal the
rest of the name, and it will need a new return spring.
166._____ Large 14-inch drawknife, very good overall.
167._____ Pair of drawknives: carriage maker's drawknife with 7-inch blade; and a
WILHELM PUTSCH K.G. with 13-inch blade and offset handles, very good.
168._____ Stanley VICTORY No. 1105 iron jack plane with stained hardwood tote and
knob, complete and fine.
169._____ Union No. 537 Trask Patent transitional jack plane, replacement tote and
knob, nice original blade, good overall.
170._____ Stanley #5C Type 11 iron jack plane with nice rosewood tote, low knob, good
T-logo blade, very good overall.
171._____ Lakeside (Union) 15-inch transitional jack plane with nice original blade, very
nice overall condition.
172._____ Stanley #5 iron jack plane, nice BB-logo blade, good stained hardwood tote
and knob, very good overall condition.
173._____ GAGE TOOL CO. No. 2 transitional 10-inch smooth plane, has a hang hole
drilled thru the sides of the stock under the front knob, otherwise fine.
174._____ UNCLE SAM 9-inch iron smooth plane, looks like a Stanley-made plane,
good tote and knob, very good overall.
175._____ Union No. 27 transitional jack plane, complete and in fine original condition;
plus a Stanley #35 transitional smoother, good Q-logo blade, nice beech tote, very
good overall.
176._____ Lot of three Siegley #2 combination plow planes; one has a cracked fence;
one has light rust and peeling nickel; the one one the right is the most complete and
comes with one plow, one match and three beading blades, also included is a Keen
Kutter auger bit box with 13 original Siegley plow blades in it.
177._____ Stanley #67 Universal spoke shave with flat and round bottom, fine handles,
and nice nickel plating, fine overall.
178._____ Scarce Evan's Patent compass or circular plane, has brass plate on side,
has light rust but will easily clean to very good overall condition.
179._____ Early Stanley #98 side rabbet, no provision for depth stop, very good knob,
very good overall.
180._____ Late Stanley #99 side rabbet with intact depth stop, very good overall.
181._____ Stanley #68 rabbeting spoke shave, V-logo iron, very good overall.
182._____ Chaplin's Patent 6 1/2-inch iron block plane with nice Tower & Lyon iron,
very good overall.
183._____ Stanley #140 rabbeting block plane with removable side, Patent date in side,
has one improper screw securing the removable side, otherwise complete and very
good.
184._____ Stanley #113 compass plane with T-logo blade, intact rear handle, needs light
cleaning, very good overall.
185._____ Sargent No. 57 scraper plane (similar to Stanley #112) fine tote with long
spur, nice beaded knob, no blade, very good overall.
186._____ Stanley VICTOR No. 20 1/2 compass plane, nice japanning, good V-logo
blade, very good overall.
187._____ Late model Stanley #40 scrub plane with extra blade support in bed, BB-logo,
scuffed but intact hardwood tote and knob, very good overall.
188._____ Stanley #113, early model with 4-hole blade adjuster on side, decorative
screws, very good overall.
189._____ Lot of four Stanley marking or marking & mortise gauges: unmarked #77
rosewood, complete and fine; No. 72 SW double beam, complete and fine; No. 65
SW complete and fine; and an unmarked boxwood marking & mortise gauge, has
previous owner's name W.L. WRIGHT stamped into both sides of head, very good.
190._____ Lot of three rosewood handled sliding bevels; the 11-inch model on top has a
brass star in one side that may indicate it was made by the Star Tool Co; the 12-inch
one in the center is a little rough; and 12-inch one on the bottom is very good.
191._____ Lot of five marking or marking & mortise gauges: unknown make marking &
mortise gauge, needs new points, fine wood; Stanley No. 62 SW, complete and very
good; unknown make marking gauge with dark stain, very good; Stanley No. ? for
straight or curved work, missing rub block, very good; and an unknown make with
oval boxwood? head that is cracked on one side, good beam.
192._____ Lot of four rosewood handled try and try & miter squares: Unknown make try
square with 7 1/2-inch blade, light pitting on blade, nice handle; try square with 9inch blade, very good; early Stanley try & miter square with sandwiched wooden
handle, 8-inch blade, and lead joint, very good; and a rosewood and brass try and
miter square with 6-inch blade, two patent dates in handle, very good.
193._____ Lot of five marking or marking & mortise gauges: three unknown make beech
gauges, all in good overall; two Stanley No. 77-type rosewood marking & mortise
gauges, one missing the rub block, good overall.
194._____ Four try squares: 6 1/2-inch model, cracked handle, good overall; unknown
make with fine 7-inch blade; unknown make with 6-inch blade; and a mahogany
model with 4 3/4-inch blade, very good.
195._____ Four rosewood handled sliding bevels: 10-inch; 9 1/2-inch; and two 8-inch
models with fancy brass screws.
196._____ Lot of four claw hammers including a KEEN KUTTER; MAYDOLE;
HAMMOND? and a very nice CHENEY nail holder PAT. NO. 162,176.
197._____ Stanley #7 iron jointer plane, good T-logo blade, rosewood tote has been
glued, good low knob, very good overall.
198._____ Lot of four wooden handled hammers including a nice MEPHESTO adz
hammer, very good.
199._____ Stanley #6 iron fore plane WWII model with hard rubber nut, good BB logo
blade, hardwood tote and knob, very good overall.
200._____ Stanley #7C corrugated iron jointer plane, nice BB-logo blade, rosewood tote
spru MIA, good low knob, very good overall.
201._____ Stanley #6C corrugated iron fore plane, fine early-style rosewood tote and low
knob, fine overall.
202._____ Sargent #718 AUTOSET iron fore plane with tilting front handle nice tote,
good original blade, with light cleaning will be very good overall.
203._____ Sargent combination plane (similar to Stanley #45) with two-row canvas
pouch of blades, long and short rods, beading stop depth stops, some of the blades
have rust, will clean to very good overall.
204._____ Early Stanley #28 prelateral transitional fore plane, eagle logo on toe, good Qlogo blade, tote spur broken and semi repaired, good overall.
205._____ Four iron block planes: Keen Kutter K18; Keen Kutter KK15, throat adjust
cam is MIA; Keen Kutter K220; and Chaplin's Patent Tower & Lyon with small
chip out of left front corner of side.
206._____ Lot of four iron block planes: Stanley #130 double ended; unknown make
similar to early Stanley #120; Stanley #118; and a REVONOC.
207._____ Lot of four iron block planes: Sargent (similar to Stanley #130) double ended;
Stanley 6-inch with knuckle jointed lever cap; Sargent #217; and Stanley #60
1/2._____
208._____ A.J. WILKINSON & CO. 8-inch folding handle drawknife, complete and
fine.
209._____ JAMES SWAN Co. 8-inch folding handle drawknife, very good.
210._____ Winstead Edge Tool Works 8-inch folding handle drawknife, complete and
fine.
211._____ Small 6-inch JAMES SWAN drawknife, complete and fine.
212._____ Original plastic roll of Diamond Edge auger bits, bits are poking thru plastic at
bottom, very good bits.
213._____ Three bitstock tools: Woods? patent adjustable hollow auger, plus large and
medium sized dowel or spoke pointers.
214._____ Millers Falls-type jointer gauge or fence for iron bench planes.
215._____ Nice 3-tier box of Russell Jennings auger bits, containing a nice set of
Jennings bits.
216._____ Three adjustable hollow augers both with depth stops, two have March 5,
1878 patent, one is set up to use in drill press, the other in a brace plus an A.A.
Woods that is set up for use in a drill press.
217._____ Unknown make iron jointer fence or gauge for wooden bench planes, with
screws, very good.
218._____ Medium and small Enterprise-type bung augers, complete and very good.
219._____ Four fixed-size hollow augers.
220._____ Stanley #386 jointer gauge or fence, knob chipped at base, good.
221._____ Pair of Stanley planes: early #78 complete with fence and depth stop, patent
date on blade, very good; plus a #148 match plane that is missing both blades but is
in good overall condition.
222._____ Lot of six assorted saws: four keyhole saws by Disston, Atkins, and
Richardson Bros; a Union Hardware Co. hacksaw; and a small coping saw with
wooden handle.
223._____ Lot of 8 saw sets: Disston Triumph; Morrills; Atkins; TAINTOR'S POSITIVE
No. 7; No. 100; Keen Kutter, etc.
224._____ Three keyhole saws including a PHOENIX, all very good.
225._____ Lot of three crating hammers: NOX TOX; BOX TERRIER; and a small
DIAMOND DULUTH, all very good.
226._____ Three saws including two keyhole types, all very good.
227._____ Pair of crating hammers: W.H. COX & SONS TUCSON, ARIZONA; and
COMPLIMENTS OF METZLER & SONS. INC. nickel plated, both are fine.
228._____ Stanley #46 skew bladed combination plow plane, with seven original blades,
the largest blade has small corner chip; all three main sections, rods, depth stop,
needs filletster blade, nicker on sliding section, slitter and rear depth stop to
complete.
229._____ Pair of crating hammers: BABY TERRIER; and BRIDGEPORT
TOMAHAWK JUNIOR, both very good.
230._____ Stanley #50 light duty plow plane with main body, fence, arms, beading stop,
and one plow blade, skate of plane is chipped where nicker would go, a good user.
231._____ Two hack saw frames; the one on top is a STAR TOOL CO. and the bottom
one is UNION, both are very good.
232._____ Pair of cast iron tongue & groove planes: Stanley #48, no blades, but the plane
itself is fine; and a Union #41 (similar to Stanley #48) tongue & groove plane, no
blades but the body is very good.
233._____ Scarce Union #42 (similar to Stanley #49) tongue & groove plane, complete
and very good.
234._____ Pair of hand drills: #5 complete with auxiliary handle, no bits inside storage
handle, very good overall; and a GOODELL PRATT with very nice wood, intact
chuck, fast-and-slow gears, very good overall.
235._____ Four wooden planes: 7 1/2-inch chamfer plane, no blade, otherwise very
good; New York Tool Co. 8-inch wooden smoother with nice AUBURN TOOL
blade; 9-inch spar plane by H. CHAPIN UNION FACTORY; and a Continental 8
3/4-inch smoother with GOLDENBERG ACIER FONDU blade with adjustable
chip breaker, very good.
236._____ Pair of hand drills: Small Goodell-Pratt with steel auxiliary handle, nice
chuck, good overall; and a Millers Falls No. 1 that is complete and very good.
237._____ J.E. BUCK, RUSSEL SEREE STANPORT? toothing plane, very good.
238._____ Millers Falls No. 2-A large hand drill, with 7 original bits in handle, complete
and very good.
239._____ Early wedge-arm plow plane with wooden depth stop, one blade, wedges are
replacements, and could stand better ones, very good overall.
240._____ Lot of three wooden planes: 6 3/4-inch W. BUTCHER blade, good overall;
unknown make 8-inch smooth plane, very good overall; and a 9-inch W. HILLS?
BOSTON miter plane, complete and very good.
241._____ Scioto Works 9-inch No. 31 miter plane, very good overall.
242._____ Unusual 11 1/2-inch wooden miter or low angle bench plane with W.
GREAVES & SONS blade, very good overall.
243._____ Pair of fixer upper Stanley #81 cabinet scrapers, both will need new wooden
bottoms, one original Stanley blade included, both will make great users with a little
rehab work.
244._____ Stanley #66 with straight fence, no blades included, but you can buy new sets
of blades online.
245._____ Pair of all-iron cabinet scrapers: early Stanley #80, complete and very good;
and a WINCHESTER, has replacement blade, body is very good.
246._____ Stanley #12 1/2 cabinet scraper with rosewood bottom, nice Disston blade,
blade was taped to bottom with packing tape so there is glue on bottom and on
blade, fine overall.
247._____ Stanley #81 cabinet scraper with original V-logo blade and nice rosewood
bottom, complete and fine.
248._____ Stanley #12 cabinet scraper with nice SW blade, owner had taped blade to
bottom with packing tape so you will need to use solvent to get glue off blade and
off sides; fine overall.
249._____ Stanley #80 cabinet scraper with SW logo on skate, BB-logo blade, 98%+
japanning, fine overall.
250._____ Pair of Winchester socket chisels, one has mushroomed socket from being
abused.
251._____ Lot of four Winchester screwdrivers, some better than others No. 7104 6in.; 7103 4-inch; 7101, 2-inch; and one marked Winchester with no model
number but same size as the 7101.
252._____ Winchester 10-inch slip joint pliers, complete and very good.
253._____ Winchester 10-inch No. 2499 gas pliers, complete and fine.
254._____ Little Winchester ball peen hammer, very good overall.
255._____ Lot of six Keen Kutter wooden handled screwdrivers.
256._____ Five transitional jack planes: two Sargent #3415, one early and one late;
Lakeside; Ohio Tool #027; and a fine HSB REVONOC.
257._____ Stanley #45 combination plow plane in tin box (no lid) 19 blades including
slitter, has script logo on skate, long and short rods, cam (missing screw) beading
and depth stops, needs outer knob on fence and two or three blades to complete, all
in all a nice plane in a very good box.
258._____ Stanley #41 Millers Patent plow plane for parts, has main frame, repaired
wrap-around fence, unslotted fence screws, main frame is good, has Rule & Level
logo on skate, nice rosewood handle, a few chips from top handle spur, and one 1/4inch blade.
259._____ Riverside R100B BLUE SEAL take down rafter square, little light rust, will
clean to fine.
260._____ Original box containing six original blades including filletster for a Millers
Patent #141 plow plane, very good.
261._____ Lot of four handled transitional smooth planes: early Sargent #3411; later
Sargent #3411; Stanley #35; and Stanley #135 Liberty Bell.
262._____ Crescent Tool Co. nail puller, complete and fine.
263._____ Large 19-inch turnscrew or screwdriver, marked with makers name but we
can't make it out, very good overall.
264._____ Long 15-inch D.R. BARTON gouge, needs handle, fine overall.
265._____ Stanley #70 box scraper, complete and very good; plus a wooden mallet.
266._____ Stanley No. 38 level stand for iron levels, nice nickel plating, very good
overall.
267._____ Three saw tools: English No. 42 saw wrest, complete and very good; a saw
filing fixture; plus an unknown saw set with some pitting.
268._____ Stanley #71 router plane, WWII model, no throat closing fixture, one 1/2-inch
blade included, nice hardwood knobs, very good japanning.
269._____ L&I.J. WHITE broad hatchet, 5 1/2-inch blade, complete and very good.
270._____ Pair of Stanley #71 router planes, one mounted to a board with throat closing
rod, good knobs, 1/2-inch blade, very good; the other an earlier vintage with fine
knobs, no blades.
271._____ L&I.J. WHITE broad hatchet, 4-inch blade, complete and very good.
272._____ Short handled mortising axe, complete and very good.
273._____ Pair of roofing hatchets: C. HAMMOND PHIL'A; and an Underhill Edge
Tool Co. both good.
274._____ Plumb 5-inch broad hatchet, complete and very good.
275._____ Winchester 4 1/2-inch broad hatchet, complete and fine.
276._____ Lot of of four 22-inch wooden jointer planes SCIOTO WORKS; JAS.
RONBOCK?; H.L. JAMES MASS.; and unknown make with HUMPHREYVILLE
blade, all very good.
277._____ Stanley #129 Liberty Bell 20-inch transitional fore plane, nice T-logo iron,
tote broken in middle and missing spur, very good overall.
278._____ Stanley #29 transitional 20-inch fore plane, good Q-logo blade, very good
overall.
279._____ Stanley BAILEY #28 transitional 18-inch fore plane, nice SW logo blade,
nice tote and knob, very good overall.
280._____ GAGE TOOL CO. No. 14 transitional 18-inch fore plane, nice original blade,
tote a clunky replacement, good overall.
281._____ Pair of wooden jack planes: unknown make with OHIO TOOL THISTLE
BRAND blade, very good; and NEW YORK TOOL CO. with SANDUSKY TOOL
CO. blade, good overall.
282._____ Lot of four rosewood handled sliding bevels: nice 8-inch model; an 8 1/2-inch
model with slotted locking screw; a very good 10-inch model; and a rough 10-inch
model that has had the screw replaced by a steel screw.
283._____ Wooden spoke shave W.J. (William Johnson) with 3 5/8-inch blade, nice
brass wear plate on bottom, fine overall.
284._____ Three rosewood handled sliding bevels: a 10-inch model with big brass screw,
very good; a Stanley 10-inch that needs cleaning but is very good; and one with a
faint name that may be HILDICK stamped into the wood.
285._____ W. Walter & Co. SHEFFIELD spoke shave with 3-inch blade, small hang
hole in one end of handle, very good overall.
286._____ C.S. OSBORNE rosewood spoke shave with screw operated blade depth
adjustment, brass wear strip on bottom, very good overall.
287._____ Nice Wm. MARPLES HIBERNIA WORKS boxwood marking gage with 2inch blade, fine A.ATKINS owners mark, fine overall.
288._____ Unknown make mini spoke shave with 1 3/4-inch blade, very good overall.
289._____ Lot of three rosewood handled try and try & miter squares: STANLEY SW
with 10-inch blade and partial decal on nice rosewood handle; STANLEY try and
miter square with 7 1/2-inch blade, good overall; and a try square with 3-inch blade,
very good.
290._____ Lot of five marking and marking and mortise gauges: homemade double beam
wedge locking, good; several unmarked marking gages and one marking and
mortise gauge, complete and very good.
291._____ Three rosewood handled try squares: unknown make with 12-inch blade,
good; unknown make with 9-inch blade, very good; and Stanley with 6-inch blade
and crack in handle, good.
292._____ Lot of four hammers including a CHENEY 1924 patent adz hammer, very
good; small H&B New Britain, Conn claw hammer; small CHENEY claw hammer,
very good; and a D. MAYDOLL straight peen very good.
293._____ Lot of five iron block planes: Millers Falls #68 double ended; early Stanley
#120; Stanley #110; Winchester 3064 (Sargent); and Sargent 5306.
294._____ Two claw hammers including fine CHENEY nail holder and a D. MAYDOLL
claw hammer, very good.
295._____ Three iron block planes: Stanley 7-inch with Excelsior-style body and knuckle
cap; Stanley #60? low angle with nickeled cap; and Stanley #203.
296._____ Pair of ball peen hammers; one by Winchester and one Keen Kutter.
297._____ Lot of four iron block planes: Sargent 5 1/2-inch #206 with gull-wing screw;
early Stanley #9 1/2; another early 9 1/2 with chip in right front corner; and a later
Sargent #206.
298._____ Pair of broad axe heads: one on top is marked DOUGLAS AXE MANUF CO.
W. HUNT &?, it has 12-inch cutting edge; the bottom one 10 1/2 inch.
299._____ Four iron block planes: Stanley #75 bullnose; early Stanley #101; early
Stanley #102; and Stanley #103.
300._____ Fine Stanley #10 1/2 carriage maker's rabbet plane, last of the U.S. Made
models with near perfect japanning, just a scuff or two on otherwise fine tote and
knob, about as good as they get.
301._____ Keen Kutter KK3 30-inch plumb & level, complete and fine.
302._____ Early H. CHAPIN UNION-FACTORY 28-inch plumb and level, both vials
intact, very good overall.
303._____ Pair of 28-inch levels: Stanley #3, complete and very good; and Keen Kutter
KK3 both vials intact, very good.
304._____ Keen Kutter KK0 26-inch plumb & level, complete and very good.
305._____ Lot of five FORD wrenches: T5893 lug; M-81A-17017; M01A-17017B;
T5893; and screw adjust nut wrench with M casting mark, all very good.
306._____ Pair of levels including a 24-inch sheet metal ACME inclinometer type, needs
cleaning; and a 24-inch Stanley in a new wooden stock.
307._____ Lot of seven FORD wrenches: screw adjust nut wrench; pliers; and five
double open ended, all very good.
308._____ Pair of wooden levels: 24-inch GOODELL-PRATT CO. double plumb &
level, one plumb vial dry, otherwise very good; and a Stanley No. 1193 SW brassbound mahogany with hang hole in end of stock.
309._____ Two stackable sets of wooden drawers each containing 15 drawers and most
of the drawers filled or partially filled with assorted makes of wood auger bits. The
owner was trying to make complete sets. Among the bits included are ones by
Fulton, Jennings, Pexto, Greenlee, Irwin, and many more. These drawers came out
of Phoenix hardware store that went out of business in the early 1960s.
310._____ Three wooden Stanley levels: 22-inch No. 3, both vials intact, brass end
plates, very good overall; 20-inch No. 0 with dry plumb vial, good overall; and a
20-inch No. 00 with part of original decal on top, dry plumb vial, good overall.
311._____ Pair of 18-inch iron fore planes; Stanley #6 with two patent dates in bed, Qlogo blade, nice rosewood tote and low knob, good overall; and a prelateral Stanley
#6 with nice early style rosewood tote and beaded knob, BB logo blade with patent
date, good overall.
312._____ Lot of two sharpening stones one in a nice wooden box.
313._____ Lot of nine FORD wrenches.
314._____ Lot of three sharpening stones one in a wooden base.
315._____ Lot of six ford wrenches including screw adjusting nut wrench and pair of
pliers.
316._____ Lot of five paper covered books: New England Antiques Crafts and Factory
Outlets; Monhagen Saw Works reprinted by EAIA in 1976; Little Book of Early
American Crafts & Trades by Peter Stockholm; Stanley 1991 Pocket Price Guide
by John Walter; Disston Handbook on Saws reprinted by MWTCA in 1983; and
1909 Price List William Marples & Sons Limited Sheffield reprint by MWTCA.
317._____ Lot of seven Ford wrenches including two lug; a screw adjusting nut wrench
and an open end with graduated bar.
318._____ Two hardbound tool related books: Modern Carpentry by Fred T. Hodgson
VOL. 2, scuffed cover, very good overall; and Tools And Machines by Charles
Barnard, 1903, complete and very good.
319._____ MOXON MECHANICAL EXERCISES printed by the EAIA in 1975,
complete and fine.
320._____ Five softcover tool books: 1886 Illustrated Catalogue of Scroll Saws, Lathes,
Fancy Woods… by A.H. Pomeroy reprint by Pilgrim Publishers; 1876 Price List
G.W. Bradley's Edge Tools; Harness Maker's and Dealer's Supply Catalogue, James
R. Hill & Co. Concord New Hampshire that has holes punched but needs to be
stapled or otherwise secured; United Hardware & Tool Corp. maker's of FULTON
TOOLS Catalog No. 40 reprinted by MWTCA in 1983; and Hirth & Krause,
Dealers in all kinds of Leather & Finding, reprinted by MWTCA in 1980.
321._____ Pair of hardbound books: The Wooden Plane by Richard A. Martin and
printed by the EAIA in 1977, complete and fine; plus a lightly worn copy of Steel
Square And Its Uses revised edition 1941 by William Radford, good overall.
322._____ Hardbound 1939 Charles Bruning Company General Catalog 13th Edition of
drafting and surveying equipment, fine overall.
323._____ Three John Jacob Holtzapffel books: The Principles & Practice of Ornamental
or Complex Turning, like new with fine dustjacket; Holtzapffel's Construction,
Action And Application of Cutting Tools, no dust jacket, book is fine; and Hand or
Simple Turning Principles and Practice, fine with fine dust jacket.
324._____ Hardbound Keuffel & Esser Co. 1927 catalog of surveying and drafting
equipment, worn but very good overall.
325._____ Circa 1949 Albert Steinfeld & Co. Wholesale Hardware Established 1854,
Tueson, Arizona, complete and very good. A note on the inside cover says the
company went out of business shortly after this catalog was published; plus a copy
of The American System of Manufactures, The report of the Committee on the
machinery of the United States in 1855 and the special reports of George Wallis and
Joseph Whitworth in 1854. This copy published in EDINBURGH in 1969.
326._____ Hardbound Practical Carriage Building Book by M.T. Richardson, reprint by
the EAIA, complete with dust jacket, fine.
327._____ Two hardbound tool books: Planemakers and Other Edge Tool Enterprises In
New York State in the Nineteenth Century by Kenneth D. Roberts with intact dust
jacket, good overall; and a copy of Alvin Sellens' Woodworking Planes, book is
fine, no dust jacket.
328._____ Circa 1905 RAYL'S Detroit Michigan, Catalog No. 21, catalog of
woodworkers tools reprinted in 1983 by Roger K. Smith, very good; plus an
original Brown & Sharpe Catalog No. 33 circa 1938, very good overall.
329._____ Three tool books: Jedediah North's Tinner's Tool Business by John H. Demer
and printed by EAIA in 1978; hardbound copy of The Tools That Built America by
Alex W. Bealer complete with dust jacket fine overall; and an early copy of British
Planemakers from 1700 by W.L. Goodman, complete and fine with worn dust
jacket.
330._____ Three paper covered tool books: No. 88 Price List of John Wilkinson Co.
Chicago, ILL; Ken Roberts reprint of the Eighth Edition Catalogue of ALEX.
MATHIESON & SONS LIMITED SARACEN TOOL WORKS, GLASGOW; and
Illustrations of Trades by Chrles Tomlinson and printed by the EAIA in 1972.
331._____ Lot of four wooden bench planes: unknown make 9-inch miter plane, Gladwin
Tool Co. blade; E.W. CARPENTER single iron smoother one ear cracked and small
crack in side from wedge being driven in too far, good overall; nice smoother with
Chapin Stephens Co. blade; and a fine 6 3/4-inch Sorby smoother.
332._____ Two horn planes: JORDAN HARSWARE CORP, NEW YORK, AUSTRIA
No. 2, missing the 1 3/4-in. blade, very nice body and wedge; and one with
PEUGEOT FRERES scrub blade, very good.
333._____ BIRCH & SON wooden compass plane, one ear cracked, very good overall.
334._____ Ohio Tool Co. No. 035 (same as Stanley #35) transitional smooth plane, with
nice tapered Ohio Tool Thistle Brand blade, nice tote and knob, maroon japanning
on frame, very good overall.
335._____ Stanley #35 transitional smooth plane, nice Q-logo blade, very good overall.
336._____ Stanley BAILEY #26 transitional jack plane, good V-logo blade, very good
overall.
337._____ Stanley BAILEY #27 1/2 wide-body or jumbo jack with nice T-logo blade,
fine early style beech tote and knob, fine overall.
338._____ Stanley #28 transitional fore plane, R&L-logo blade, a few cracks in stock,
very good overall.
339._____ Stanley #129 Liberty Bell transitional jointer plane, good Q-logo iron, tote
spur missing sliver, good knob, good overall.
340._____ Sargent #3424 transitional jointer plane, round logo on iron, horseshoe lateral
lever, complete and very good overall.
341._____ Stanley #6 iron fore plane with good T-logo blade, nice rosewood low knob,
tote spur MIA, very good overall.
342._____ Stanley #7 iron jointer plane, STANLEY lever cap with orange background;
fine BB logo blade, nice rosewood tote and tall knob, fine overall.
343._____ Stanley #6 iron fore plane, fine early-style rosewood tote and short knob, very
good Q-logo blade, very good overall.
344._____ Stanley #7C iron jointer plane, STANLEY lever cap with orange background,
good BB logo blade, scuffed but intact rosewood tote and tall knob, some white
paint overspray, with light cleaning will be very good.
345._____ Lot of four iron block planes: unknown make 7-inch with L.Bailey iron;
REVONOC; Stanley S18; and Stanley #102.
346._____ Lot of six iron block planes: Sargent #307; Stanley 6-inch with SW knuckle
jointed cap; Stanley 7-inch with early knuckle jointed cap; early Sargent missing
front knob; Stanley 7-inch with Excelsior-style body, chip on front corner; and rusty
Stanley #9 1/2.
347._____ Pair of hatchets: THE PEERLESS CINCINNATI O. (Ohio) broad hatchet;
and a fat little hatchet with hammer pole, very good.
348._____ Turners sizing chisel and gouge, very good.
349._____ Pair of hatchets: HAMMOND PHILADELPHIA CAST STEEL; and a
WINCHESTER broad hatchet, SHARP!
350._____ Pair of broad axe heads: the one on top has an 11-inch edge and is stamped
N30; the bottom is marked E.C. SIMONDS ST. LOUIS DIAMOND STEEL, it has
an 11-inch blade.
351._____ Pair of 44-inch rapid transit pipe clamps, both very good.
352._____ Large 4-foot wooden square, very good overall.
353._____ Three wooden furniture clamps.
354._____ Lot of four wooden furniture clamps,the longest not shown in photo.
355._____ Barn-beam boring machine, in very good overall condition, one bit (not
pictured) included.
356._____ Six assorted T augers, five with square shanks that appear to be early.
357._____ Lot of four 15-inch transitional jack planes: Stanley Rule & Level #26
prelateral; Keen Kutter (Ohio Tool); Union Tool Co.; and another Keen Kutter
K26?.
358._____ Lot of three assorted T-augers, all a bit different.
359._____ Pair of block planes: Stanley #9 1/4 complete and very good; plus a
SHELTON (similar to Stanley #118) steel, complete and very good.
360._____ Stanley #248 with 7/16-inch blade, comes with pre-stops rods, very good
overall.
361._____ PRUTTON CLEVE OHIO iron block plane, first we have seen of this model.
362._____ Pair of duplex or rabbet and filletster planes: unknown make with cap screw
similar to an early Stanley, has fence and nicker, but no depth stop, very good; and
a late model Stanley with thumb operated blade adjuster, intact fence and depth
stop, complete and fine.
363._____ Pair of hand vises; one smaller and one large with huge wing nut, both very
good.
364._____ COLLINS & CO. HARTFORD LEGITIMUS broad hatchet with 4-inch
blade, tiny chip in corner of blade, very good.
365._____ Lot of five wooden panel gauges, two needing a little help; and the brass
headed one is complete and very nice.
366._____ Lot of three bit extensions: Stanley #180, 24-inch; Millers Falls 24-inch and a
fine Millers Falls #35.
367._____ Stanley SW #66 1/4 36-inch, 4-fold rule with later style arched joint, a nice
clean rule.
368._____ English 4-fold meter stick, marked in inches on outside and metric on inside,
missing last 1/4-inch from one section. Marked PATENT 1173229.
369._____ Stanley #66 3/4 36-inch, brass-bound four-fold rule, nice tight joints, inside
indexing holes wallowed out, good overall.
370._____ Stanley #66 1/2 36-inch, 4-fold rule with early arched joint, a few small spots
of minor staining, good overall.
371._____ RABONE #1201 36-inch, 4-fold rule with nice arched joint with protractor,
very good overall.
372._____ Stanley? #72 1/2 2-foot, 4-fold rule with square joints, nice tight joints, very
good overall.
373._____ Unusual UPSON NUT #53 1/2 architect's rule with nice arched joint, very
good overall.
374._____ Stanley #36 1/2C right handled, could use a light cleaning, very good overall.
375._____ Two Stanley rules: #163 24-inch, 4-fold rule in near new condition; and a
Stanley #68 24-inch, 4-fold rule, two small patches of staining, very good overall.
376._____ E.A.STEARNS No. 54B 12-inch 4-fold ivory & German silver caliper
rule, there is some yellowing to the outside and one leg has a crack; inside is
considerably whiter and has intact indexing pins, very good overall.
377._____ Stanley SW #61 1/2 36-inch, 4-fold rule with later style arched joint, some
wear outside, very good inside.
378._____ Four-fold meter rule with square sections, some wear, but all joints intact and
brass tips present, an interesting rule.
379._____ INTERLOX 48-inch MASTER SLIDE RULE by DAHL MFG CO N.Y.C.
complete and very good.
380._____ Two 4-fold rules: RABONE #1167 36-inch, 4-fold "blindman's rule" with
extra large numbers, complete and fine; and a Stanley #66 3/4 fully bound 36-inch
4-fold rule, stained inside and out, good overall.
381._____ Small brass anvil advertising PERFECT CIGARS MILWAUKEE WISC
likely given away intended to be used as a paperweight, very good.
382._____ Small steel or iron anvil paperweight, very good.
383._____ Small steel anvil advertising the SHERMAN VEHICLE CO. ST. LOUIS,
very good.
384._____ Small iron GRINNELL ANVIL, very good overall.
385._____ Small brass anvil, likely produced as a paperweight, complete and fine.
386._____ Small brass anvil, likely produced as a paperweight, complete and fine.
387._____ Lot of bitstock tools: Wm. Johnson adjustable washer cutter; CRAFTSMAN
washer cutter; two nut drivers and a mystery tool.
388._____ Two patented spiral screwdrivers: Millers Falls No. 41 or 42 reversible, in
good working order, no bits included; and a Goodell Brothers Co., Greenfield,
Mass. U.S.A., Pat. Oct. 5, 1897 with one flat bit, very good overall.
389._____ Lot of boring and bitstock tools: two twist drills; three Morris taper twist
drills; four nut drivers; countersink; spanner; and a STEARNS nickel plated
countersink.
390._____ Lot of six flat bladed screwdrivers by HSB&CO; JAMES SWAN; N.E.S.
CO.; NEW STAR; etc.
391._____ Lot of 24 bitstock gimlet bits, one by Thiele & Quack.
392._____ Two ratchet screwdrivers: unusual YANKEE NO. 10 reversible, very good
overall; and a Goodell-Pratt Toolsmiths, both complete and very good.
393._____ Five bitstock tools: two screwdriver bits; center bit; countersink, and a fine
HARGRAVE adjustable washer cutter.
394._____ Lot of nine wooden handled screwdrivers most with round shafts, two PerfectHandle-types one by IRWIN and one marked GERMANY; two Goodell Pratt; three
CHAMPION, etc.
395._____ Lot of 13 bitstock tools.
396._____ Pair of all-steel screwdrivers; the one on top is similar to the BRIDGEPORT
and BUFFUM TOOL CO. ones we have seen, this one is unmarked; and a twist
handle model, very good.
397._____ Lot of 13 assorted auger bits including a large #28.
398._____ Lot of nine screwdrivers including an advertising one marked
COMPLIMENTS OF CRYSTAL AUTO CO., CRYSTAL, N. DAK.
DISTRIBUTORS OF, HUDSON & OVERLAND AUTOMOBILES,
ACCESSORIES & REPAIRING; and a nice Millers Falls #55 ratcheting model.
399._____ Lot of 9 assorted bitstock tools including a Wm. Johnson adjustable washer
cutter; and an unusual countersink patented March 1, 1887, very good.
400._____ Lot of nine little wooden handled screwdrivers including five that most likely
came with early Stanley combination plow planes.
401._____ Keen Kutter KK3 30-inch plumb & level, complete and very good.
402._____ Pair of wooden levels: Keen Kutter KK0 30-inch plumb and level, plumb vial
MIA, otherwise OK; and a 28-inch H. CHAPIN UNION FACTORY plumb & level
with intact vials, complete and very good.
403._____ Pair of wooden levels: 26-inch Stanley #3, complete and fine; and a 24-inch
Stanley #30 double plumb & level with large brass covers over plumb vial, stock
needs refinishing.
404._____ Pair of wooden levels: 24-inch Stanley #3 complete and very good; and a 22
1/2-inch COOK'S PATENT No. 1 with intact vials, mahogany? stock, very good.
405._____ Short handled 9-inch broad axe marked CAST STEEL W.O. CROSS, handle
needs to be cut off above the head, very good overall.
406._____ Keen Kutter single bit camp hatchet, very good overall condition.
407._____ Winchester single bit camp hatchet, very good overall.
408._____ DUNLAP & MADERAIA, CHAMBERSBURG, PENN broad axe with 12
1/2-inch blade, needs to be re-handled, very good overall.
409._____ CAFFEE & WHITE CAST STEEL 9 3/4-inch broad axe with offset handle,
very good overall.
410._____ William M. Beatty & Son Chester, PA (very faint mark) broad axe with 7 1/2inch blade, appears to be a cow or a bull for logo, also marked CAST STEEL,
CHESTER, very good overall.
411._____ Pair of Stanley rabbet planes: #190 with BB logo blade, intact depth stop,
complete and fine; plus an early #191 with vine cast handle; decorative cap screw,
Rule & Level logo on blade, intact depth stop, very good overall.
412._____ Stanley #378 with 7/8-inch blade, intact depth stop, very good overall.
413._____ Three coffin-shaped smooth planes: SCIOTO #3, complete and fine; J.
PEARCE NEW YORK No. 108 with Chapin Stephens blade, fine; and a SCIOTO
WORKS No. 3 with side split out and BUTCHER iron, good overall.
414._____ Fine SARGENT & CO. No. 612 1/2 razee handled smooth plane, as good as
they get.
415._____ Pair of Stanley router planes: #71 1/2 that has a blade in it that will not fit the
blade adjuster, plane is fine; and a #71 with all three blades, throat closing
attachment, needs light cleaning but will be fine.
416._____ Pair of wooden spoke shaves: one with 3 1/8-inch blade hang hole in handle,
very good; and a very nice inshave or travisher, complete and very good overall.
417._____ Pair of wooden spoke shaves; one with 2 1/2-inch blade, brass wear plate on
sole, good overall; and one with 2 5/8-inch blade, very good overall.
418._____ Lot of three try squares and a miter square: homemade model with decorative
end on both blade and handle, very good; Stanley miter square with early Rule &
Level Co. 12-inch blade, very good overall; Keen Kutter (Disston) with 7 1/4-inch
blade, very good; and an unknown make with 6-inch blade, very good.
419._____ Pair of hatchets: Genuine PLUMB Boy Scout type with wooden handle, fine;
and FULTON with light pitting.
420._____ Lot two rosewood handled try squares; one a Stanley V-logo with 6-inch
blade, complete and fine; and an unknown make with 6-inch blade, good; plus a
Stanley nickel plated miter square with 8-inch handle, very good.
421._____ Pair of hatchets: Nice WINCHESTER; and a TRUE TEMPER with nail
claw.
422._____ Pair of broad axe heads: the one on top is 11 1/2-inches; the bottom one is
marked R LIND, it has an 11-inch edge.
423._____ Three St. Louis axe and hatchet heads, from left to right: Keen Kutter No. 5
single bit axe head; Keen Kutter that has been filed or ground on the hammering
side; and a smaller SHAPLEIGH hatchet head.
424._____ Three hand vises including one marked H. BOOKER GERMANY.
425._____ Stanley #40 scrub plane, late model, fine wood, fine overall.
426._____ Two iron block planes: Stanley #220 with large diameter adjuster screw, very
good overall; plus a Keen Kutter K103, complete with original blade, very good
overall.
427._____ Stanley #45 combination plow plane with all three main sections, long rods,
front depth stop, 19 blades including slitter in wooden box, needs a few screws, two
depth stops and a cam to complete, will make a great user.
428._____ CRESCENT 8 to 10-inch double ended adjustable nut wrench, very good
overall.
429._____ Firestone 9-inch smooth plane built on what looks like a late model Stanley
bed with blue paint or japanning and a plastic tote, FIRESTONE blade and lever
cap, has some red paint in bed around front knob; plus a Stanley #80 scraper in blue
paint.
430._____ Unusual tool for fastening shoe buttons marked BXI 127 with swastika
logo, we believe this to be a BUFFUM TOOL COMPANY tool from Louisiana
Missouri, very good overall.
431._____ Lot of four wrenches including a 7-inch Billings E Series; a C.E. BILLINGS
5-inch; Springfield Drop Forging 5-inch; and a stamped or pressed steel RED
HEAD PLUG WRENCH, EMIL GROSSMAN CO DETROIT, NEW YORK,
CHICAGO.
432._____ Lot of seven assorted bicycle or pocket wrenches: BILLINGS & SPENCER A
Series 4-inch; FRANK MOSSBERG A-2; two MOSSBERG A-1; an unmarked 5inch wrench; and two 4-inch wrenches with Keystone logo.
433._____ Lot of four wrenches: 5-inch BARNES TOOL COMPANY pocket or bicycle
wrench, some mild pitting; U.S. 5-inch, very good; 5-inch WAKEFIELD CYCLE
WRENCH Co. PAT. APL'D FOR, good; and a 7-inch KING DICK automotive nut
wrench MADE IN ENGLAND, complete and fine.
434._____ Two 8-inch S handle adjustable nut wenches B&C (Bemis & Call) and
BUFFUM TOOL CO. (Louisiana, Missouri) with swastika-type logo, both very
good overall.
435._____ Lot of 11 smaller wrenches including: 6-inch CRESCENT; 4-inch
DIAMALLOY; 4-inch SUPERJUSTABLE by J.H. Williams; 4-inch BARCALOBUFFALO; 4-inch AW-4 NEW BRITAIN; 4-inch side adjust FAIRMOUNT;
BILLINGS 4-inch Model A; Mossberg No. 531 19/32 open end; etc.
436._____ Lot of nine bicycle or pocket wrenches including BA&R; 4-inch BILLINGS
& SPENCER; fine 5-inch A&M; unmarked 4-inch center adjuster; STERLING NO.
1; C.E. BILLINGS; three unmarked 4-inch wrenches, one pitted, etc.
437._____ Lot of eight assorted wrenches: 8-inch Craftsman slip-joint pliers, rusty;
CRESCENT 8-in. 200mm.; 6-inch SUPERJUSTABLE J.H. Williams & Co.;
LEVER JAW (Vice Grip type); 8-inch CRESCENT; 6-inch CRESCENT;
BILLINGS 7-inch auto; and 6-inch double ended alligator with thread chasers in
handle.
438._____ Lot of 10 bicycle or pocket wrenches including Iver Johnson; Billings?; U.S.;
Mossberg No. 100 NATIONAL; Sandow; BECKLEY-RALSTON; and a 4-inch
FAIRMOUNT.
439._____ Lot of 8 wrenches; seven are unmarked stamped or pressed steel and the
alligator is by AMERICAN SAW CO. TRENTON N.J.
440._____ Keen Kutter lathing hatchet with partial Keen Kutter sticker on original
handle, UNDERHILL name on head along with KEEN KUTTER block and wedge
logo, fine.
441._____ Lot of four screwdrivers: two Yankee spiral types each with one flat bit; a
Goodell with flat bit; and one REID PATENT that needs a bit and has cracked
wood.
442._____ Stanley #30 angle divider with SW logo on straight edge, fine overall.
443._____ Lot of three pocket or bicycle wrenches: ALDERMAN; Mossberg A-1; and
BARNES TOOL CO., all very good.
444._____ Wooden coachmaker's-type router with one plow iron tied to it, needs a wedge
to secure the iron.
445._____ Nice CHENEY nail holding claw hammer.
446._____ Lot of screwdrivers including, CHAMPION, two KEEN KUTTER, and four
Yankee spiral types each with one flat bit.
447._____ Fine Millers Falls "cigar" spokeshave with rosewood or cocobolo handles.
448._____ Lufkin tape clamp for holding the ends of surveying tapes, fine.
449._____ Pair of Bodmer Patent (U.S. No. 1,189,422) sights for wooden levels made by
Stanley, very good.
450._____ Nice Osborne strapped saddlemaker's hammer.
451._____ Pair of Stanley iron spokeshaves both with Rule & Level-logo blades.
452._____ Lot of 27 Russell Jennings auger bits, most in very good usable condition,
plus a Stanley #49 bit gauge, complete and fine.
453._____ Pair of iron spoke shaves: Seymour Smith & Sons double shave, complete and
very good; and a #64 with SW blade, very good.
454._____ Two Snell & Atherton leather shaves, both are complete and very good.
455._____ Stanley #60 double shave, complete and very good.
456._____ Three sets of KEEN KUTTER auger bits one with 6 bit; one with 9 and one
with 13, plus a Stanley #49 bit gauge.
457._____ Stanley No. 55 hollow faced spoke shave with R&L-logo blade, plus two #66
beaders for parts; one is an early japanned model with straight fence, screw for
blade clamp is broken off in the clamp, very good; the other is a nickel plated late
model, it needs clamp screw, fence and blades.
458._____ Lot of IRWIN PATENT auger bits, all in good usable condition.
459._____ Unusual UNION MFG CO. iron spoke shave with open loop handles, Union
marked blade, very good overall.
460._____ KEEN KUTTER lot: small 5-inch pliers; lot of round hardware tags; for
bitstock tools including three NOS flat bit screwdrivers; a nail set and a straight
razor in original box.
461._____ Pair of Stanley spoke shaves: a #51 that needs a blade; and a #? with R&Llogo blade.
462._____ Three marking gages and two extra heads; to of the gages are Stanley #77type rosewood models.
463._____ Lot: SARGENT 5-inch nippers; small L.S.S. Co. adjustable machines square,
and five pocket or bicycle wrenches including two Mossberg A-1, a Mossberg F-1;
WAKEFIELD CYCLE. All in good to very good condition.
464._____ D.R. BARTON short handled adz, the hammer side is missing a big chip from
one corner, the adz side is very good; pluw a 6-lb. sledgehammer head.
465._____ Stanley H1105 jack plane new in original albeit crushed box, plane is like
new, box is OK.
466._____ Winchester No. 6212 machinists riveting hammer and No. 40, 8-inch hack
saw frame with bleached out handle.
467._____ Early Stanley 6-inch iron block plane with Excelsior-style body, later V-logo
blade, small chip in throat, very good.
468._____ Three iron block planes: KEEN KUTTER KK110; SARGENT 5307; and a
Stanley #110, all are complete and very good.
469._____ WINCHESTER #3090 (Sargent) 7-inch iron block plane, complete and fine.
470._____ Lot: small deck-type scraper; large Morrill Patent saw set; BOYNTON Patent
saw set (Nov. 25, 1873) and an early STILLMAN PATENT (Sept. 26, 1848) saw
set, all very good.
471._____ Two transitional planes for parts or restoration: Sargent #3411in good usable
condition; & a Stanley #27 that had a broken tote and the left side had been cut to
allow the plane to be used as a rabbet, can be restored to usable condition.
472._____ Pair of German pruning shears, very good; small pin vise with wooden
handle; and a glass cutter.
473._____ Lot of seven wrenches: 12-inch SUPERJUSTABLE; 10-inch 75A BEMIS &
CALL CO; two S handled adjustable; BONNEY and J.H. WILLIAMS 10-inch
single ended alligators; and a 14-inch J.H. Williams alligator.
474._____ Three Keen Kutter tools: 12-inch nippers, very good; 10-inch adjustable pipe
wrench with bent handle, good; and a 10-inch Crescent-type nut wrench, pitted with
light rust, rough.
475._____ Four adjustable nut wrenches including MOSSBERG 10-inch automotive nut
wrench; WIZARD No. 9; and IHC.
476._____ Lot of six alligator wrenches including TWIN BULL DOG; No. 2
ALLIGATOR WRENCH, etc.
477._____ Lot of 13 FORD wrenches; 10 doubled box ended; and and three lug
wrenches.
478._____ Lot of 13 wrenches including 11 alligators; a 6-inch wood handled monkey
wrench and an 8-inch MASTEWRENCH.
479._____ Small 5-inch twist handle nut wrench, very good overall.
480._____ Nice 6-inch Vandegrift Patent adjustable farm wrench.
481. to 498. OPEN.
499._____ Stanley #101 mini block plane with early "football" Rule & Level logo blade,
very good overall.
500._____ Scarce Winchester bullnose rabbet plane (similar to Stanley #75), this one
is complete and very good.
501._____ Lot of 5 bit extensions: two by Greenlee, Yankee, Millers Falls all very good,
and one that is too pitted to see maker's name.
502._____ Early STANLEY NO. 78 rabbet and filletster plane with patent date on blade,
two patent dates inside frame, vine casting handle, intact fence, very good overall.
503._____ Lot of four 18-inch bit extensions: fine STANLEY No. 180; Millers Falls No.
35; GREENLEE No. 900; and Stanley SW.
504._____ Keen Kutter (Goodell-Pratt) 2-speed breast drill, main gear and breast plate
painted green, complete with auxiliary handle, very good.
505._____ Four bit extensions: three Yankee No. 2150; and an unknown make with
integral chuck, very good.
506._____ Goodell-Pratt 2-sped breast drill with nice paint and original decal on main
gear wheel, 2-jaw chuck, intact auxiliary handle, very good overall.
507._____ Lot of seven extra long auger bits: four by AUGER BIT CO. HOLYOKE,
MASS; and three by SNELL, all very good.
508._____ Two wrench books: EAST-WEST ANTIQUE WRENCHES & TOOLS by
Wullweber; Northern Plains Antique Wrenches & TOOLS by Wullweber; and
Observations on the Pole Axe by Douglass C. Reed.
509._____ Large collection of old tool sales lists by dealers such as Tom Witte, Bud
Steere; Two Chiselers (Bob Finch); Grizzly Antiques (John & Janet Wells), and
many more.
510._____ Three paper covered books: United States Patents 1790 to 1870 by Petere C.
Welsh, Contributions From The Museum of History And Technology; Catalog
January 1, 1915 D. STOLP'S Dutch Tools reprinted by MWTCA 1982; and Special
Natural History Bonus an Age of Barns by Eric Sloane.
511._____ Atkins 1941 Saw Catalog, there is some paper peeling from the spine,
otherwise complete and very good.
512._____ Four paperback books: The Official Guide To Collector Knives Third Edition
by James F. Parker and J. Bruce Voyles 1981 Edition; The Kovels' Complete
Antiques Price List 1977 Edition; original 1949 Stanley #34 Tools Catalog, good
overall; Full Length Roof Framer by A.F.J. REICHERS, hardbound, 1917,
complete and very good.
513._____ Two books: A Book of Country Things 1965, hardbound with dust jack, fine;
and an original 1883 HAND SAWS by Fred T. Hodgson, very good overall.
514._____ Pair of tool books: Chas A. Strelinger & Co. Detroit, Mich Woodworkers
Tool Catalog, complete and very good; and A GUIDE TOL American Wooden
Planes by Emil and Martyl Pollak, very good.
515._____ Pair of hardbound books: With The Watchmaker At The Bench 1944 edition
by De Carle; and Light and Heavy Timber Framing by Fred T. Hodgson, covered
soiled.
516._____ Lot of three axe and hatchet heads: the one in the center is by Collins & Co.,
all three are very good and just need new handles.
517._____ Early Stanley #45 combination plow plane with all three main sections, two
depth stops, and felt roll of 14 blades plus a dated match blade in plane, very good
overall.
518._____ Stanley #46 skew bladed combination plow plane, all three main sections,
fence is missing the rosewood, one blade, will clean to very good.
519._____ Small brass MUELLER BRASS CO. advertising anvil paperweight, complete
and fine.
520._____ Small steel anvil marked on top EXHIBITOR 1979, THE IL-MO, TRACTOR
& ENGINE CLUB, complete and fine.
521._____ Small brass anvil paperweight marked on top TO FORGE OUR
FRIENDSHIP, SOUTHERN ORNAMENTAL IRON CO., PR 3 2850, ST-LOUIS
MO., complete and fine.
522._____ Small brass anvil paperweight with hardy and prichard holes, very good.
523._____ Mini aluminum anvil and a mini steel horseshoe, both very good.
524._____ Small brass advertising anvil paperweight, TO FORGE OUR FRIENDSHIP,
VIKING FREIGHT COMPANY, very good.
525._____ Large G.F. Hall Patent (U.S. #1,871,176) combination bevel, squaring and
leveling device rule attachment, made by the Boye Needle Company, Chicago,
IL, complete and fine.
526._____ Stanley #68 24-inch, 4-fold rule, very good overall.
527._____ Stanley #51 24-inch, 4-fold rule, complete and very good.
528._____ Two 4-fold rules: Stanley #163 24-inch, 4-fold rule, some warping, very good
overall; and a Stanley #75 24-inch, 4-fold rule, one leg warped, one leg chipped at
edge, good overall.
529._____ Small 3-foot zig zag rule advertising DISTRIBUTED BY. J.S. KIBBEN CO.
RAPID CITY, S.D. MADE IN GERMANY, very good overall.
530._____ Stanley #136 3 1/2-inch caliper rule, no model number found on rule, former
owners name in one side, good overall.
531._____ Upson Nut #59 4-fold rule with double arched joints, moderate wear, good
overall.
532._____ Upson Nut #62 1/2 fully brass bound 24-inch, 4-fold rule, complete and fine.
533._____ E.C. SIMMONS #680 REDLINE 2-foot 4-fold rule, some light wear on
outside, very good.
534._____ Stanley #36 1/2C left hand caliper rule, very good overall.
535._____ Unknown make #79 24-inch, 4-fold rule with board scales on inside, good
overall.
536._____ Campbell Patent (U.S. #867,566) combination rule attachment that
transforms a standard 4-fold rule to a square, miter square and marking gage,
made by the Three Tool Rule Co., this one is complete and fine.
537._____ Stanley #27 24-inch, 4-fold rule in near new condition.
538._____ RABONE #1380 24-inch, 4-fold rule with early style arched joint, very good.
539._____ Stanley #62 24-inch, 4-fold brass-bound rule, complete and very good.
540._____ Pair of 4-fold rules: Unusual J. RABONE & SONS #1213C 24-inch, 4-fold
caliper rule with iron scales inside and out, unusual and very good overall; and a
Stanley #63 1/2 24-inch 4-fold rule with some warpage, good overall.
541._____ Lot of three push drills including a nice Millers Falls model with rosewood
handle.
542._____ J.S. Fray rosewood tool handle, filled with bits, fine overall.
543._____ Pair of Stanley clapboard siding tools, both very good.
544._____ Unusual SARGENT box scraper (similar to Stanley #70), complete and fine;
plus a nice Stanley #82 long handled scraper, fine.
545._____ Three marking gages: Stanley #90 single beam, very good; a Barrett Patent
(U.S. #384,413), complete and very good; and a Stanley #91 with japanned head,
fine.
546._____ Four push drills including a small YANKEE No. 43 with wooden handle.
547._____ Four awls including one with rosewood handle that has a full set of assorted
bits stored inside; and one marked ARROW No. 2.
548._____ Unmarked Millers Falls Alford's-type hand vise, this is like a regular Alford's
except this one has a brass handle with a rosewood cap, several tools inside the
handle, very good overall.
549._____ Four awls including a SARGNT with rosewood handle that has several bits
stored inside.
550._____ Lie-Nielsen TOOLWORKS No. 2 (LN 2) bronze smooth plane, like new in
original box.
551._____ Wheelwright's traveler with steel handle and brass wheel, intact pinter, very
good overall.
552._____ GERAL brass carriage maker's T rabbet plane with wooden tail handle, may
be a one off of an iron GEARAL plane, as the casting looks a bit rough. Little is
known about the GERAL company other than that they made brass and iron tools
mostly for the carriage trade.
553._____ Brass 28-ounce "COMMON SENSE" plumb bob, very good.
554._____ Box of 24 brass tools such as lifters and gate cutters used in a foundry all
inside a hinged wooden box.
555._____ English cue tipper and crimping tool or clamp for putting new tips on pool
cues, includes a file for cleaning up the cue before applying the new tip.
556._____ Brass brace with 7-inch swing, screw in side to secure bit, fine overall.
557._____ Brass or bronze router plane, full sized with nice wooden knobs and 1/2-inch
blade, very good overall condition.
558._____ Leonard Bailey lever cap with cam locking lever and having a decorative
"VICTOR" knob, the cap itself appears to have been broken at the leading edge, but
it is good for parts.
559._____ French? 12-inch brass dividers with pencil holding compass attachment
that is hinged, very nice.
560._____ OMICRON BEAM COMPASS complete and very good in original box.
561._____ Large 56-ounce brass plumb bob with removable brass top and removable
steel tip, very good.
562._____ Unknown make 17 3/4-inch iron level, appears to be some sort of military or
gun sighting level, appears to have a new coat of back paint, very good overall.
563._____ Four adjustable automotive nut wrenches: Craftsman No. 4449 11-inch and
4449 9-inch models; HERBRAND 7-inch; and a 7-inch MADE IN GERMANY
with a tire tool on end of handle.
564._____ Five 10-inch adjustable pipe wrenches: STILLSON; DUNLAP; TRIMOUNT;
WALWORTH; and G.T.D. CORP'N.
565._____ Five adjustable automotive nut wrenches: 10-inch WAKEFIELD WRENCH
PAT. MAY 5, 1908; VLCHEK 11-inch; CRESCENT TOOL CO. 9-inch; unmarked
7-inch; and a HERBRAND 7-inch with light pitting.
566._____ Four adjustable automotive nut wrenches: 9-inch CRESCENT TOOL CO.; 9inch WAKEFIELD WRENCH CO.; 7-inch HERBRAND (some rust on end of
handle); and an unknown 7-inch with light pitting and light rust.
567._____ Five 8-inch Crescent-type nut wrenches: CRESCENT; WIZARD; BET'RGRIP; and OWATONNA TOOL CO.
568._____ Lot: brass watchmaker's caliper; "Schaefer America's Oldest Beer" bottle
opener; wire handled screwdriver, two pair of scissors and a T-handled wrench.
569._____ Lot of five 8-inch Crescent-type nut wrenches: RIDGID 708; two
CRESCENT TOOL CO.; LACO 80; W. GERMANY 8;
570._____ Two plumb bobs including a nice little brass model with removable top and
steel tip.
571._____ Lot of three ratchet wrenches: on top is an OWATONNA TOOL CO. with
swiveling head; BONNEY double ender 1/2 & 9/16; and a GENERAL double
ender 13/16 & 7/8.
572._____ Larger sized surveyor's-type brass plumb bob with removable top and steel
tip, very good overall.
573._____ Three Billings & Spencer Wrenches: 12-inch Crescent; 10-inch all steel
monkey wrench; and an 11-inch adjustable auto nut wrench.
574._____ Lot of 11 ratcheting wrenches including a BETHLEHEM SPARK PLUG;
DURO METAL PRODUCTS 672; MILBAR NO. 43 double ended; and a 3/8-inch
drive PLOMB No. 5249, etc.
575._____ Six 6-inch adjustable pipe wrenches: two by WALWORTH; CRAFTSMAN;
two by RIDGED; and an ERIE TOOL WORKS PIPEMASTER.
576._____ Seven ratcheting wrenches including ones by HINSDALE; AUTO
ACCESSORIES CORP; PALMETER TOOL CO.; DURO 673, etc.
577._____ Three bench mounting iron saw vises including a DISSTON No.2.
578._____ Lot of four wooden molding planes: 1-inch No. 180 round; boxed center bead
needing new boxing; Ohio Tool 1/4-in. side bead missing piece of boxing; and a
triple reed that needs the bottom resurfaced.
579._____ Three bench mounting iron saw vises.
580._____ Lot of four wooden molding planes: Ohio Tool #5 hollow & round pair;
COLLINS 3/16 side bead; and AUBURN TOOL No. 105 1/4-inch side bead that
needs some boxing replaced.
581._____ Three bench mounting iron saw vises.
582._____ Osborne leather slitter Patented Aug. 1,'76; July 17,'77, very good overall.
This was to have been lot 516 in our December sale but we lost track of it.
583._____ Lot: PENINSULAR stove lid liver; another lifter; crate opening hammer;
Cronk-type fencing pliers; DASCO specialty tool; three wrenches; and a
combination hatchet, hammer and screwdriver.
584._____ Lot of seven farm wrenches including three buggy wrenches (one marked
7307C); a two nice PLANET JR, one in red paint.
585._____ Lot of eleven wrenches: two Ford lug wrenches; two hubcap wrenches, one by
FORD; a TIRE CARRIER WRENCH; and three wrenches from a set.
586._____ Lot of 10 assorted wrenches: bitstock nut driver; double ended alligator;
single alligator (pitted); bicycle or motorcycle spoke wrench; snath; W&B wood
handled monkey, etc.
587._____ Nice 5-inch wire handled adjustable nut wrench.
588._____ Lot of screwdrivers: on left is an early English? model with turned wooden
handle and brass ferrule; a brass handled nested set with three smaller ones inside,
the outer one is pitted; and a Studebaker advertising screwdriver (third from left in
top photo), etc.
589._____ Three Bullock and Leach Patent saw sets, all are very good overall.
590._____ Scarce Stanley OH20 Two-Tone block plane in original pasteboard box.
Box is very good with intact label, needs all four corners of the top re-taped,
plane is fine.
591._____ Unusual Marples? cast iron glue pot and liner with the HIBERNIA name cast
into the top on both sides of the outer pot, some light rust, complete and very good.
592._____ Stanley #281 butt gauge and mortiser in original pasteboard box. Box is well
worn and a bit tatty on the top, but the tool itself is fine.
593._____ Lot of three "eggbeater" hand drills: Millers Falls #105 with bits inside
cocobolo handle; Goodell Pratt, etc.
594._____ Stanley #59 dowel jig in original pasteboard box. Appears to be complete with
clamp and all guides.
595._____ Lot including a Union No. 8 hacksaw with iron frame and wooden handle; and
a large Millers Falls No. 2 eggbeater hand drill.
596._____ Esco pistol grip saw set No. 795B in original pasteboard box. Box top has
been slightly crushed, but saw set is like new.
597._____ Star Tool Co. No. 8 cast iron hacksaw frame with wooden handle, just add
your own blade and it will be fine.
598._____ Stanley #194 Fibre Board Beveling Plane in original pasteboard box.
599._____ Pair of nickel plated Stanley try squares with 6 and 8-inch blades, both are
very good.
600._____ Stanley #71 nickel plated router plane in original pasteboard box with
fine picture label.
601._____ Two jointers planes: 26-inch D.R. BARTON ROCHESTER razee-style with
good D.R. BARTON blade, tote spur sheared off, very good overall; and a 22-inch
STANLEY No. 30 prelateral transitional with solid brass adjuster nut, eagle logo on
tote, solid lever cap, tote spur MIA.
602._____ Pair of 22-inch Stanley #30 transitional jointer planes both could use a good
cleaning but can be put back into service.
603._____ Two planes: Stanley BAILEY No. 27 1/2 wide body transitional jack plane,
V-logo blade, tote broken in middle and glued, will clean to very good; plus a 24inch SARGENT & CO. #615 wooden jointer, complete and fine.
604._____ Pair of jointer planes: Stanley #132 Liberty Bell transitional jointer, tote
broken in center and missing spur; and a 26-inch A. HOWLAND & CO. wooden
jointer, good overall.
605._____ Cheney nail-holding claw hammer, complete and very good.
606._____ Keen Kutter camp hatchet, some mild pitting near the top of the head, very
good overall.
607._____ Two PS&W wood handled monkey wrenches: 10-inch with handle similar to
a Perfect Handle, PAT JAN. 14, 86, very good overall; and a 7-inch with some light
pitting and numerous nicks and dings.
608._____ Lot: Three tack hammers including a nickel plated one from a BOSTON
maker with patent date; plus a loose Keen Kutter head.
609._____ Two 15-inch No. 90 adjustable monkey wrenches: on top is a BILLINGS,
complete and very good; and on the bottom is a BEMIS & CALL with the
additional make S.P.Co., complete and very good.
610._____ Pair of 15-inch rosewood handled try squares: the one on top has a support tab
on the inside of the handle, it is marked NELSON & HUBBARD, there is light
pitting on the blade; the one on the bottom has a nice blade but there is no makers
name.
611._____ Two 12-inch adjustable all-steel monkey wrenches: on top a BEMIS & CALL
No. 90A, marked on lower jaw CM&STP (CHICAGO, MILWAUKEE, ST. PAUL
& PACIFIC RAILROAD) very good overall; and a W&B marked I.C.R.R.
(ILLINOIS CENTRAL RAILROAD), complete and fine.
612._____ Pair of try squares: a Stanley #12 with 10-inch blade, nice nickel plating, very
good overall; and a 12-inch Stanley? with nice rosewood handle, light pitting on the
blade, good overall condition.
613._____ Pair of 12-inch all-steel adjustable nut wrenches: L. COES with some mild
pitting, very good overall; and a W&B marked RAILROAD SPECIAL on top jaw,
has a casting defect on the handle, but is still very good.
614._____ Lot of five wooden marking gages: two double beam STANLEY RULE &
LEVEL CO. models one with wood screws; a walnut? model that needs the point
sharpened and needs a new brass rub block; a beech model with part of head sawed
off; and a Stanley #77-style rosewood marking and mortise gage, needs a new brass
rub block, good.
615._____ Pair of small try squares: one with mahogany? handle, 2 1/2-inch blade and
diamond pattern brass rivet covers, light rust on blade, good overall; and one with
3-inch blade with light pitting, rosewood handle cracked at top, good overall.
616._____ Prelateral Stanley #26 transitional jack plane, complete with nice R&L logo
blade, BAILEY PAT chip breaker, nice eagle logo on toe, very good overall.
617._____ Pair of Stanley try squares: Stanley No. 12 with nice 12-inch blade, very good
overall; and a No. 12 SW with 10-inch blade, nice nickel plating, very good overall.
618._____ Lot of four Stanley transitional jack planes: #27 with BAILEY name cast into
frame, right side blown out; good for frame, blade, lever cap; #26 that has a broken
and glued tote, otherwise complete; #127 LIBERTY BELL complete and very
good; and a #26 with BAILEY name cast into frame, V-logo blade, nice tote and
knob, very good.
619._____ Pair of rosewood handled try squares: Stanley with 12-inch blade, nice
rosewood handle, blade slightly bent, very good overall; and a NELSON &
HUBBARD, MIDDLETOWN CT, with 15-inch blade having a brass support tap on
inside of the handle, rosewood handle chipped near the bottom on one side, good
overall.
620._____ Four Stanley transitional planes: prelateral #26, worn body, tote spur
reworked, good for parts or restoration; #26 with BAILEY name cast into frame, Tlogo blade, very good overall; #127 LIBERTY BELL, tote spur MIA, the tab on the
blade adjuster is broken, good overall; and a #135 with eagle logo on toe, Q-logo
blade, very good.
621._____ Two iron bench planes: Stanley #5 1/2 wide body jack plane, complete and
very good; plus a Sargent #414 iron jack plane, complete and very good.
622._____ Lot of five non ratcheting bit braces including one Spofford Patent, and one
that is missing both jaws, the others are all in decent usable condition.
623._____ Two iron block planes: Early Sargent double ended with circular logo on
lightly pitted iron, good overall; and a Stanley #18 Type 3, complete and very good.
624._____ Lot of five wooden molding planes: GREENFIELD TOOL hollow;
SANDUSKY? reworked dado; BARTLETTS skewed rabbet; OHIO TOOL 1/8inch center bead; and an early J. CLOUGH stepped rabbet.
625._____ Four Stanley iron block planes: #220, 120; 118; and 9 1/2, all complete and
very good.
626._____ Lot of five wooden molding planes: 1/8-inch center bead; Ohio Tool 3/4-inch
side bead; EASTERLY & CO. NY 180 No. 12 round; early HOPKINS? No. 8
round; and MARTEN DOSCHER NEW YORK rabbet.
627._____ Three Stanley iron block planes: #103, #102 and #75 bullnose rabbet, all in
very good overall condition.
628._____ Lot of four wooden molding planes: early TOMLINSON hollow; M.
CRANNELL No. 18 round; M. CRANNELL #16 round with some rot on the toe;
and an EASTERLY & CO. NEW YORK No. 16 hollow.
THE END.
In addition to the tools above, there will be 20 lots of wood including blocks of
maple, oak and cherry for turning as well as smaller bundles of oak, cherry and
walnut dimensioned lumber for making small boxes and other articles out of. These
will be sold by choice or by lettered lots at the end of the tool auction. If you or
someone you know is into turning or general woodworking, tell them to come to the
auction for some good wood.
Absentee bids are accepted, and they will be executed competitively against bids
from the floor. To submit absentee bids, contact Mike at the address below.
Sale Managed by
Michael J. Urness & Great Planes Trading Co.
www.GreatPlanesTrading.com
Phone 314-434-4325
email: Ratdaddy@mac.com