Communication Box For Synthetic or Natural Grasswith Grass Kit Part Numbers: 712-1260 Description and Features: Product comes pre-upholsteredo UCS does not guarantee an exact match to natural grass/turf. Grass or sod can then be installed right against the side of the box. Divider welded or removable as per customer’s request Gasket sealed for weather resistance Threaded insert for connection Leveling adjusters and Ground Stud 18”, 24”, or 36” depth available with extension units (purchased separately) (2) Connection openings 6 ¼” x 8 1/8” with Solid Hand Hole Lids and locking wire to base Includes ¼” Aluminum plate with pressure treated plywood cover to apply turf to (Supplied by Contractor). Separate piece of turf is clamped inside the box, drawn over the top and secured to the outside of the box. Overall size 36.38”Lx19.25” Wx12.81”D Rule and Standard Compliance: N/A Construction: Box: ¼ “ Aluminum, TIG Welded Lid: Break formed ¼ “ Aluminum Finish: High impact and corrosion resistant powder coating Additional Hardware: Stainless steel fasteners Installation: Follow manufacturers instructions Check local codes Notes: Manufactured and Available from: UCS Inc., 511 Hoffman Rd, Lincolnton, NC 28092. Contact: Michael Chappell, Ph. (704) 732-9922. Fax: (704) 732-9559. Michaelc@ucsspirit.com (E-Mail) MADE IN USA