LifeGuard
Standard Unit Specifications
CHASSIS AND CAB STANDARD FEATURES
Chassis
Polaris RANGER 6x6
Color – Standard Polaris Solar Red Hood and Dash
Engine
Engine Type
Displacement
Lubrication
Cooling System
Starting
Exhaust
Twin Cylinder, 4-Stroke
760 cc,HO
Pressurized Wet Sump with oil capacity of 2/1.89 qts/ltr.
Liquid - cooled
Electric
Canister Style
Fuel
Fuel System
Fuel Tank
Fuel Delivery
Fuel Type
EFI
9.0/34.1 gal/ltr
Electronic Fuel Pump
Gasoline – 87 Octane or 89 Oxygenated
Electrical
Alternator
Battery
Headlight
Brake Light/Taillight
DC Outlet
500 Watts
Electric / 12 volt – 30 amp hour
50 w quartz-halogen
Standard/Standard
Dash Receptacle
Drivetrain
Transmission
Drive System
Final Drive
Automatic - PVT (Polaris Variable Transmission) High, Low, Neutral. Reverse
On-Demand True 6 WD/Rear 4WD/Mid Differential Lock
Shaft
Steering
Power Steering
Polaris Model Electronically Controlled Power Steering System
1
Rev 9/21/11
LifeGuard
Standard Unit Specifications
Suspension
Front Suspension
Rear Suspension
Dual A-Arm w/ 9.6 in./ 24.4 cm of travel
4-Wheel Dual A-Arm, IRS 9 in./22.9 cm of travel
Brakes & Tires
Brakes - Front/Rear
Parking Brake
Front Tire Size
Rear Tire Size
Hydraulic Disc with Dual - Bore Front Calipers
Hand – Actuated, Dash Mounted Lever
25 x 10 x 12 Off Road Tires on Painted Steel Rims
25 x 11 x 12 Off Road Tires on Painted Steel Rims
Dimensions & Capacities
Wheelbase
Length/Width/Height
Ground Clearance
Dry Vehicle Weight
Gross Vehicle Weight
Top Speed
Hitch Towing Capacity
Approx 110”
175/63/93 in.
10 in.
2160 Lbs
4,500 Lbs
40 MPH/64 KPH
2000 lbs.
Hood, Dash
The hood and dash shall be the standard Polaris Solar Red. The hood and dash shall be made from high-density
polyethylene (HDPE).
Roof and Roll Bar
The unit shall have the Polaris factory installed ROPS Certified roll bar. Attached to the roll bar will be an 11
gauge aluminum tread plate roof panel. The roof panel is to provide protection to the driver and passenger.
Mirrors- Left & Right Side
One convex mirror head measuring 5”x7” is to be mounted on each side of the unit. The mirror arms shall have a
built in break-away feature allowing them to pivot inward for tight locations.
Skirting- ABS
The side skirting made from .375 thick ABS material shall be supplied around the bottom of the bed. This skirting
shall give the unit a smoothed and finished appearance around the frame and rear tires.
2
Rev 9/21/11
LifeGuard
Standard Unit Specifications
Step- Rear
A 40” x 10” aluminum tread plate step shall be provided at the rear of the unit. The step is to aid in working off the
rear of the unit.
REAR MODULE
The rear module shall be constructed of aluminum tread plate flooring. (No less than .125 thick) The floor
structure shall consist of 2 inch by 3 inch aluminum tubing for the floor structure. The bed shall be 59” W x 63” H
x 91” L. There shall be a 2” aluminum tubular structure that will support a canvas type roof.
The purpose of the design of the rear bed is to allow the ability to fully support a stokes basket or standard cot
safely from the accident scene in a safe and stable manner.
CANVAS BIMINI ROOF
A canvas “bimini” style roof will be installed using Sunbrella canvas material wrapped around the aluminum
tubular structure and attached with Marine Velcro sewn into the canvas and glued to the aluminum tubes.
BENCH SEAT
There shall be installed a 12”W x 20”H x 81”L aluminum tread plate bench seat with a open front and an
enclosed back. This seat will have a 2” thick seat pad that covers the full length and is made of foam covered
with Sunbrella canvas material.
SEAT BACK AND PAD
There shall be a seat back made with .125” aluminum tread plate with a 2” seat back pad running the full length
of the bench (81’). The seat back pad is made of foam covered with Sunbrella canvas material.
* TOOL BOX w/ STOKES BASKET MOUNTING SYSTEM
There shall be an aluminum tread plate tool box capable of storing shovels, axes and other fire fighting
equipment. The tool box shall be 22” W x 84” L x 15” H. The lid of the tool box shall be designed so that one (1)
stokes basket will fit down into the lid. Thus is to allow the hauling of one patient.
There shall be a complete set of straps that will secure the stokes basket to the top of the tool box lid. The straps
shall consists of one quick release clip at the front and one ratchet strap at the rear.
* COT MOUNTING SYSTEM
A Stryker Cot mounting system shall be provided in the patient module. This system will accommodate a
standard full size cot.
3
Rev 9/21/11
LifeGuard
Standard Unit Specifications
NOTE: ASTERISK ( * ) DENOTES ONLY ONE OF THESE TWO CHOICES CAN BE CHOSEN AS
STANDARD. IF THE OTHER CHOICE IS ALSO WANTED IT MUST BE PURCHASED AS AN OPTION.
LIGHTING STANDARD FEATURES
HEADLIGHTS
There shall be dual 50 quartz- halogen lamps mounted in the front grill.
TAIL LIGHTS
Two red taillight bulbs shall be provided and mounted in the tail panel. The lights will illuminate when the ignition
key is in the “on” position.
TIRES AND WHEELS STANDARD FEATURES
CARLISLE OFF-ROAD TIRES
There shall be six (6) Carlisle Off-Road tires provided. Two (2) 25x10x12 front and four (4) 25x11x12 tires will
be provided.
STEEL WHEELS- BLACK
There shall be six steel wheels painted black. Two (2) front (25x7x12), four (4) rear (25x8x12) wheels.
4
Rev 9/21/11