Aktuelle Partnergesuche für das Programm „Forschung zugunsten von kleinen und mittleren
Unternehmen (KMU) im 7. Rahmenprogramm der EU“ (Abgabefrist für Förderanträge: 8. Dezember
2010)
Name und
Kurzfassung
des Antrag
Bestehendes
Konsortium
Gesucht wird
Informationen
SME for
Software and
electrical
product design
http://www.ncp-sme.net/Countries/HU/PS-SME-HU-956
RTD: 2 partners from
Germany and Hungary
Recording and
analysis of the
acoustic
spectrum to
prevent pump
failures
SME employing multi
pumps systems in
industrial washing
machines
SME providing
maintenance services
to the oil and gas
industry
SME for Sensor
technology
SME installing and
maintaining heat
pumps
Augmented
Reality in the
Furniture Sector
Developing a
portable
hyperspectral
system to check
out fresh food
quality
RTD specialized in the SME related
furniture sector
with the
RTD specialized in
furniture sector
Augmented Reality
RTD specialized
SME software
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-950
in Augmented
company specialized in Reality,
augmented reality
Rendering,
software
development or
SME software
3D vision
company
3 SMEs
(DE/FR/IT).
End-users
involved in the
whole food
chain
(production,
distribution,
RTD: FAICO
supply and
(Foundation for Optics, consumption).
Image and 3D Design). (SMEs from
Innovation and
other European
Technology Center.
countries are
Spain. Coordinator.
also welcome.)
SMARTIONS S.L.
Consulting and
Engineering.
2 RTD (DE/FR)
– RTD
Performers with
expertise in the
SME: 2 Spanish SMEs following areas:
Electronic and
Microelectronic
Engineering,
Measuring
Devices,
Mechanical
Engineering
Design, Systems
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-939
Integration
Solutions,
Multi-Spectral
Analysis.
Development of
a portable
metrological
system to
improve SMEs
competitiveness,
which face
serious problems
to obtain
accurate
measurements in
the European
SMEs
production lines.
2 SMEs with
expertise in
3 SMEs from Spain
Screen
2 RTD partners: 1 from
Manufacturing
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-930
Spain and 1 from
1 RTD (DE/FR)
Finland
with expertise in
Microelectronics
KMU1: Closed
Photobiorreactor
KMU2: Microalgae
Biotechnology
KMU:final
product
specifications
and
Commercial uses
development,
of microalgae
RTD1: Strain selection preferently in:
cultured in
cosmetic,
closed
medical,
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-942
RTD2:
photobioreactors
nutraceutical
Photobiorreactor
as cosmetic,
uses
optimization
nutraceutical or
medical uses
RTD:Harvesting
RTD3: Product
, concentration
development and
and separation
downstream related
technologies
tasks
Intelligent and
integrated tool
for increasing
response and
cooperation
capabilities of
beekeepers in
front of bee
health problems
3 RTD Performers
from 3 different
european countries. 2
SME Associations.
(Beekepers and Bee
Researchers).
2 SMEs with a
technical profile
2 other SMEs.
KMU1:
experience in
sensor networks
installation and
maintenance, in
hosting and
maintenance of
network
systems.
Verband: AG
Sector and
activity:
Beekepers
Association.
Link between
SME End user
and RTDs when
developing the
specifications
and testing of
the tools.
KMU2:
Beekeeper SME
End User has to
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-691
be supplied to
complete the
consortium,
providing end
user point of
view, especially
relevant in the
validation stage
of the project
results.
novel approach
to pest control to
which rodents
are particularily
sensitive
combined with a
new and novel
transdermal
delivery route
RTD1: UK university
RTD2: Spanish RTD
on engineering and
plastics
KMU1: Dutch aerosol
company
KMU:
specialised
knowledge in
the area of
pheromones,
copulins and
odours as
attractants
http://www.ncp-sme.net/Countries/UK/PS-SME-UK-921
KMU2: Greek
biosynthesis company
KMU3: VTL and
Biotronics
RTD:
specialised
knowledge in
the area of
pheromones,
copulins and
odours as
attractants
KMU1: Medical
Diagnostics
KMU2:
Manufacturing
of Diagnostics
Early detection
of HIV-1 using
ultra-sensitive,
rapid capacitive
biosensor
KMU3: Sensor
Electronics
RTD: MFKK
Invention and Research
Center Services Ltd.
KMU4: Signal
(HU), coordinator and Interpretation
electronics
OTH1:
Private/Public
Hospitals,
Clinics
http://www.ncp-sme.net/Countries/HU/PS-SME-HU-936
OTH2:
Private/Public
Laboratories
KMU1: which is
capable of
helping us to set
KMUs involved in
Finalizing a
up a marketing
development of microResidential
plan to sell
combined heat/power
ORC-based
pellet-based
http://www.ncp-sme.net/Countries/BE/PS-SME-BE-927
systems
micro CHP
micro combined
system on pellets
heat power
RTD centres also
systems for the
residential (and
SME) market.
KMU2: which is
experienced in
measuring and
controlling
(heating)
systems
KMU3: which is
experienced in
(European)
standards and
certificates for
micro-CHP
systems
KMU4: Pellet
burner and heat
transfer
KMU5: which
produces
boilers. This
European SME
can build in
close
cooperation with
Alenco the
invented microCHP systems for
the European
market.
Fine Chemicals:
Changing from
batch to
continuous
process
RTD1: Italy
RTD2: Spain
KMU: Italy
KMU's from
other countries
of the European
Union with need
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-915
of changing the
batch to
continuos
process
Verband1: from the
UK
Development of
STEP-NC
compliant
universal
manufacturing
platform for
Electrical WireDischarge
Machines
Verband2: from
Norway
Verband3: from
Turkey
KMU1: from the UK
KMU2: from Serbia
RTD1: from the UK
KMUs:
industrial
softwares
preferably
developing or
distributing
http://www.ncp-sme.net/Countries/HU/PS-SME-HU-918
softwares and
other solutions
for CAD/CAM
applications or
CNC controlling
systems
RTD2: from Hungary
Comprehensive
Solution to the
Definition and
ARALDI, SL - Spanish KMU1: with
KMU that will be
experience in
involved in the
process
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-901
Automatic
Development of
Procedures
Applications in
cLoud
computing
statistical treatment of
data
management
KMU2: with
experience in
quality
management
RTD1: that will
take in charge
all the Software
development
part.
RTD2:
undertake all the
Cloud
Computing part
of the project.
KMU1: VOIGT+WIPP
Engineers, Austria
KMU2: IFAK
Model predictive
SYTEMS, Germany
control for
industrial waste
RTD1: BOKU-SIG,
water treatment
Austria
KMU:
Specialist/Suppli
er online
http://www.ncp-sme.net/Countries/AT/PS-SME-AT-870
monitoring for
waste water
RTD2: University of
Girona, Spain
New system for
Apnea diagnosis
at home
KMU1: Medical
devices
manufacturer (if
sleep diagnosis,
the better, but
RTD: MFKK
not unique).
Invention and Research
This company
Center Services Ltd.
will participate
(HU), coordinator and
in the system
electronics
definition and
development
KMU1: EDMA Innova
(electronics)
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-730
(ES), IT and
electronics
KMU2:
Software control
KMU2: Hospital
systems
universitari Josep
(software
Trueta (sleep unit)
development)
(ES), medical expert
KMU3: Medical
offices with
expertise in
sleep
FASTforLIFE
aims to research
on security,
precision and
resistant aspects
of RFID
technology from
RTD: Spain, Overall
expertise on wireless
sensors technologies,
radio frequency and
mobile applications,
Project coordination
KMU: Fire
engines
manufacturers,
or Firefighting
instruments
manufacturers
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-898
HW/SW point of
view for the
development of a
system capable
to identify
utensils in realtime within Fire
Engines and
thus, to provide
faster response
in case of
emergency.
KMU1: Spain, Fire
engines manufacturers
KMU2: Holland,
Firefighting
instruments
manufacturers
RTD: Experts in
RFID and
resistant
electronics
manufacturing
KMU1: Filter company
(Germany)-->develop
a filter prototype to use
in microalgae
applications
KMU2: Engineering
(France) -->develop a
service of assessment
to microalgae
producers
Microalgae
cultivation for
biomass energy
KMU3: (Spain) ->Final product
KMU4: (Spain) ->Final sub products
RTD1: carry out the
technical leadership,
CENER which has a
high expertise and
experience on
renewable energy
KMU:
Homogenizer
Company
(Homogenizatio
n) --> develops a
homogenizer
prototype to use http://www.ncp-sme.net/Countries/ES/PS-SME-ES-895
in microalgae
applications, and
with expertise in
HPP (High
pressure
process)
2 other RTD
KMU: engineering
with expertise in the
control systems.
(Spain).
Platform for
Development
and Integration
of GRIds
KMU:
Engineering
with experience
in the design of
3 ESS ( Energy
electric systems http://www.ncp-sme.net/Countries/ES/PS-SME-ES-892
Storage System)
and of new grids
manufacturer
which included
new renewable
2 RTD performers with
sources
expertise in renewable
energy
RTD1: Spain
Development of
RTD2: Turkey
ceramic tiles
based on ceramic
waste and high
KMU1: Bulgaria
thermal residues
KMU2: Spain
KMU: Full
cycle tile
producer
(including the
following
stages:
composition
preparation by
wet milling and
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-886
spray-drying or
dry milling,
shaping of tile
by pressing or
extrusion,
drying, glazing
and firing) or
clay paver
producer
(extrusion or
pressing).
KMU1: Milling
machines
manufacturers
Development of
a hybrid system
for both milling
and friction stir
welding
KMU2:
Machinisg
equipment
manufacturers
RTD expert in Friction
RTO:
stir welding
Machining
experts
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-883
OTH:
Automotive,
Aerospace,
Electrical and
other
sectors:TIER 2
Ultrasound
Technology For
the Treatment of
Wine, Milk,
Honey and
Fruitjuice
KMU1: Engineering
Consultancy INNOEM - Turkey
KMU2: Engineering
Consultancy - M&C
Automation and Drives
Ltd. - Bulgaria
RTD: Institute of
Microbiology and
Biotechnology,
University of Latvia
KMU1: for
honey, wine,
beer, milk and
fruit juice
packers.
KMU2: for
ultrasound
processors
http://www.ncp-sme.net/Countries/TR/PS-SME-TR-865
RTD: Interested
are welcome
NGO: Balkan Agency
KMU1: manufacturer
and distributor of
reagents and
functionalised
electrodes, Belgium
Impedimetric
Multianalyte
device for
antibiotic residue
determination in
KMU2: food (milk)
milk
analysis laboratory,
Spain
KMU1: expert
in marketing and
distribution of
analytical
instrumentation
for agro-industry
with
international
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-867
scope, with
relevant
penetration in
the dairy sector
KMU2: milk
processor and/or
producer of
fermented dairy
products
RTD1: University
(UK) – Coordinator/
mechanical design
New type of
rotary engine,
with a new
thermodynamic
cycle
KMU: interested
in making a
technical
contribution to
RTD2: University
this project or
(DE) – thermodynamic
who are
simulation
interested in
forming a
RTD3: University
licensing
(RO) – assembly and
partnership. ie.
testing
may have
complimentary http://www.ncp-sme.net/Countries/UK/PS-SME-UK-889
KMU1: (UK) –
technology such
technical direction /
as electrical
dissemination
machines, power
electronics etc.
KMU2: (TR) –
mechanical design /
OEM: engine
dissemination
producers who
may be
KMU3: (FR) –
interested in
dissemination
licensing this
technology.
3 Großunternehmen
KMU:
implementation
of smaller
engine which
produces the
same power,
prototyping
KMU-Verbände
KMU: DICE Ltd.
Double Acting
Piston Engine
RTD: Queen Mary
University of London
RTD:
development of
four stroke
engines and
engine seals
http://www.ncp-sme.net/Countries/UK/PS-SME-UK-880
OTH
(Großindustrie):
implementing a
much smaller
engine which
produces the
same power
RTD 1: University,
Ireland – HTS bacterial
based screening, food
safety profiling, food
regulatory affairs
KMU1: Polymer
processing,
controlled
Development of
release biocide
a Natural
particles (inc
http://www.ncp-sme.net/Countries/IE/PS-SME-IE-877
Biosecure
nano). Polymer
Biocide Platform
processing
RTD2: IoT, Ireland –
extraction, purification, capacity,
particle
polymer processing,
bio-fermentation
KMU1: Ireland –
Biocide development
manufacture,
fluid
incorporation
under GMP
conditions.
KMU2: Ireland – Food
KMU2: Food &
application company
Environment
Application
KMU3:UK - Animal
Technology:
Feed Product
spraying in food
Development
processing
facilities.
Development or
adaptation of a
spray.
KMU3: Health
Care &
Environment
Treatment:
medical device
coatings, surface
sanitization,
non-disposable
clothing and
material
treatment in
healthcare
environments.
KMU4: Edible
& non-edible
coatings and
barrier
development
technologies?
Overcoming
barriers to
energy saving in
public and
commercial
buildings
KMU1:
Integrator –
responsible for
specifying and
procuring the
technology (inhouse or third
RTD : from Ireland are party) to be used
considered to be part of in the project,
the consortium
including
wireless sensor
http://www.ncp-sme.net/Countries/IE/PS-SME-IE-853
2KMUs: operate in the motes, access
points, actuators
areas of service
and network
provision and
management
Technology
software.
development
KMU2:
Building
management
contractor –
responsible for
ensuring the
wireless sensor
network/actuator
system works
with existing
building
management
controls and
systems.
KMU3: Installer
– responsible for
installing the
wireless sensor
network,
actuator and
control
equipment in the
target buildings.
RTD: for
creating and
developing the
technology
defined in the
project scope
RTD1-3: University Ireland - responsible
for thermo enzyme
treatment of feedstock
-microbiology in lab
scale anaerobic
digestion
- responsible for
production of
bioplastic at lab scale
Chemical
Building Blocks
for Bioplastics
Production from
Sustainable
Feedstocks
RTD4: Research
Centre - Austria responsible for pilot
scale anaerobic
digestion process
KMU1: Austria,
responsible for pilot
scale anaerobic
digestion
KMU2: Ireland,
responsible for Pilot
scale bioplastics
production
wireless Body
Area Networks
for Smart
Assistive
Clothing
KMU1: Embedded
Sensor Developer,
Ireland
KMU2: Health
Monitoring Services,
Ireland
End User: Protective
KMU1:
extruding or
processing
bioplastics to
finished
products
(packaging,
medical or
consumer
products)
KMU2:
marketing
bioplastics
http://www.ncp-sme.net/Countries/IE/PS-SME-IE-814
KMU3:
anaerobic
digestion
biorefineries or
hydrolysis of
biomass
feedstocks
KMU1: Smart
textiles;
Development
and fabrication
of multifunction http://www.ncp-sme.net/Countries/IE/PS-SME-IE-850
electronic
textiles i.e.
fabrics and
textiles
Clothing Manufacturer, embedded with
Belgium
sensors,
antennas,
electronics, and
power supplies
KMU2:
Electronics/com
munuications
hardware
company who
specialise in the
design/manufact
ure of lowprofile/ and or
flexible PCBs
and/or antennas.
KMUs: support
to the SMEs –
AGS, needed to
customize the
platform and
also helping
RTD: Spanish
users with the
Research Center
normative
insertion into the
Intelligent web
KMU-AG: Portuguese, ARCHINORM
system for
Hungarian and Spanish database.
search and
KMU Associations of
concentrate
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-674
Architects.
RTD1: expertise
urban legislation
in Ontologies
for architects
KMU1-3: Hungarian, and Smart
associations
Search Engines
Portuguese, and
Spanish architecture
studio and experts
RTD2: with a
proven expertise
in usability
analysis, design
and deployment
of web
applications
Maximising
Energy from
Amenity Grass
micro grid are
being developed,
and it has arisen
some kind of
problems, such
as the lack of
RTD1-2: Universities
from UK providing
research input on pretreatment of grass and
expertise in
microbiology
KMU: providing
expertise in
constructing small
scale anaerobic
digestion units, UK
KMU: with expertise
in electrical
components, Spain
KMU:
renewable
energy
consultants
interested in the
concept of using
http://www.ncp-sme.net/Countries/UK/PS-SME-UK-811
amenity grass as
an energy source
for municpial
authorities or
other
landowners.
KMU1: with
expertise in the
power
electronics field
RTD: which has a high
expertise and
KMU2: with
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-841
specific
switchgears for
this systems
experience on
renewable energy,
Spain
expertise in the
ICT field.
RTD: expertise
in the power
electronics field
and ICT It
would be
valuable, if the
partner could
contribute with
one of KMu
searched
(KMU1 or
KMU2)
KMU1: UK, wireless
communications
electrical
impendance
based system to
monitor drying
process in
sausages
KMU2: Italy,
instrumentation and
prototyping
KMU3: Italy, dry
fermented sausage
production
4 RTDs from Spain,
Germany and Italy
KMU1: Drying
chamber
manufacturers:
A KMU that
manufactures
and sells drying
chambers to
sausage
producers
(Demonstration,
Training,
Dissemination
and Exploitation
activities)
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-823
KMU2: Sausage
Manufacturers:
KMUs
specialized in
the production
of dry fermented
sausages
(Demonstration,
Training, and
Dissemination
and Exploitation
activities)
KMU: expert in
at least one the
following fields:
Precision
Viticulture, GIS,
Digital Vineyard KMU2: Italy,
Vision systems
winegrowing
platform based
and Wireless
on autonomous
communications
imaging sensors KMU AG: Italy, grape
(Demonstration,
for the integrated and wine production
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-832
Training,
managment of
Dissemination
multiple
RTD1: Spain, Wireless
and Exploitation
associated
communications,
activities)
vineyards
Artificial Intelligence,
Prototyping
KMU-AG:
Associations of
RTD2: Portugal,
winegrowers or
Vision analysis
Cooperatives,
KMU1: Portugal,
Precision Viticulture
systems
RTD3: Portugal,
Agronomy and
Vitiviniculture
whose core
business is to
produce and sell
wine
(Demonstration,
Training,
Dissemination
and Exploitation
activities)
KMU1:
Aluminium
alloys
manufacturer
KMU1: Aluminium
components
manufacturer, Spain
Development of
specific
cryogenic
treatments to
increase the
service life of
aluminium alloys
used in aircraft
industry
KMU2: Cryogenic
treatment company,
Spain
KMU2:
Aluminium
components
manufacturer
KMU3:
Cryogenic
treatment
company
RTO1: with expertise
RTD with
in materials treatments,
expertise in
testing and
materials
characterization, Spain
treatments,
testing,
RTO2: with expertise
specifically
in aeronautics design,
aluminium
Spain
fatigue testing,
and
characterization
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-796
OTH:
Certification
Bodies
KMU1: Solar
panel assembly.
REpairing of
PhoTovoltaIc
Panels by Laser
Enabled Silicon
Processing
KMU2:
Automation
equipment for
electronics and
PV handling and
manufacturing.
RTD Performer with
expertice in materials
processing and laser
technologies.
KMU3:
Recycling of
electronics.
KMU4: Laser
sources and
laser equipment
integration
RTO1: High
efficiency
silicon based
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-793
cell design and
manufacturing
RTO2:
Efficiency and
defect
characterisation
techniques on
silicon cells
RTO3: Lightmaterial
interaction
fundamentals in
short pulse laser
processing of
silicon
RTO4: Life
Cycle
Assesment and
Eco Footprint
Evaluation
OTH: Large
company in the
PV
manufacturing
field.
KMU1:
Manufacturer or
supplier of
reactor parts
such as biotextile, motors,
sensors,
controllers.
1 European
Association
Novel algaebased solution
for CO2 capture
and biomass
production
KMU2:
Maintenance &
service provider
3 RTD partners: 2 from
for energy
Hungary, 1 from
industry in
Great-Britain
Eastern-Europe
3 Technical SMEs: 1
from Hungary, 1 from
Switzerland, 1 from
Germany
1 End-User SME from
Turkey
http://www.ncp-sme.net/Countries/HU/PS-SME-HU-838
KMU3:
Maintenance &
service provider
for energy
industry in
Western-Europe
KMU-AG:
Associations
experienced in
algal biomass or
biomass
KMUs as EndUser1: who have
experience in
biogas plant or
power station.
KMUs as EndUser2:
Innovative
manufacturing
company
emitting CO2
KMUs as EndUser3: Algae
raiser
KMUs as EndUser4: Algae
buyer or
processor
1 KMUs
developing (RF)
MEMS (MicroElectroMechanical
develop a
Systems )
versatile, high
technology and
performance
2 end-user
adaptive
KMUs are
impedance
awaited for
2 RTDs involved
matching device
provide
where one of them will
to increase the
technical
assume the role of
technical level
consultation/ass
coordinator. Origin:
http://www.ncp-sme.net/Countries/HU/PS-SME-HU-835
and market
essment in
Hungary and Finland.
opportunities of
MEMS, layout,
2 KMus: Romania and
the wireless
RF design,
Bulgaria.
equipment
embedded
manufacturers.
system
The objective is
programming
to create selfand packaging,
adaptive devices.
help the
dissemination
and exploitation
of project results
and assist field
testing .
Energy efficient
transistor
technology
2RTDs: from 2
different European
countries
KMU: LDMOS IP.
KMU1: working
on the low and
medium power
RF-applications
e.g. such as base
station,
microwave
http://www.ncp-sme.net/Countries/FI/PS-SME-FI-778
heating, radars
and antennas in
the frequency
domain of 0.5 6 GHz and the
power range of 1
to 100 W.
KMU2: working
on the
encapsulation of
the RF-power
chips and/or
fabrication of
the
RF-modules.
KMU: from the
agricultural
sector from a
differen country
Application of
than Spain or
information and KMU2: agricultural
Germany. In the
communication sector vineyard (Spain)
experimental
technologies
plot of this
(ICT) for
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-799
KMU3: agricultural
company will be
management of sector working in
tested the
water and energy lettuce crops, Germany
Wireless sensors
in crop
in some crop
production
RTD: Engineering
different than
Department of the
olive trees,
Universidad Miguel
vineyard or
Hernández de Elche
lettuce.
KMU1:agricultural
sector olive trees
(Spain)
KMU1:
Producer of the
raw material:
This partner
could be a waste
produces (i.e.
greenhouse, fruit
processor, grain
processor), a
crop producer
(i.e grass
cultivation)
Aquaculture fed
RTD: Fundacion
production using
CARTIF
insect meal
KMU2: Fed
producer: This
partner should
be involved in
the fed
manufacturing
since it will be
required the
manufacturing
and supply of
product to the
aquaculture
exploitation
farms
KMU3:
Aquaculture
farms: It will be
required the
collaboration of
“fish farms” to
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-790
check the
viability of the
proposed
solution and the
use of the
product. The
expected
number is about
3 farms.
RTD1: Insect
breeding and
study
RTD2: Study of
fish
development
and fed
formulation
New integrated,
multi-user, sitespecific
irrigation
management
system for high
efficient use of
water, fertilizers
and energy in
drip irrigated
crops
SME-AG1: ES
Growers and farmers
association
SME-AG2: IT
Irrigation advisors
association
SME-AG3: PT
Irrigation systems’
manufacturer
KMU1: ES Software
developer
KMU2: IT Irrigation
technology research
center
RTD1: ES Fertilizers
and soil fertility
research center
RTD2: NL
KMUs: farmers
or fruit growers
to facilitate the
field tests and
validation tasks
of the new
irrigation and
fertigation
system
developed in the
project. They
will have the
system installed
in part of their
crops for the
months planned
to demonstrate
the benefits of
the new system.
As end users of
the new system, http://www.ncp-sme.net/Countries/ES/PS-SME-ES-787
they will be
trained in its
use; will provide
feedback on
system operation
to developers
and will
contribute
significantly to
the validation
process. It is
required for
these partners to
be familiarized
with drip
irrigation
systems. It is
also required
that they use
currently drip
irrigation in
their crops,
preferably fruit
crops.
KMU1:
specialized on
machine vision:
KMU2:
specialized on
force control
KMU3:
specialized on
off-line robot
programming.
Development of
a Flexible and
Adaptive
Robotic Cell for
grinding and
polishing of
weld beads on
medium sized
structures in a
small batch
manufacturing
environment.
RTD: (ES) with
expertise on
robotization and
monitoring of
manufacturing
processes
KMU4:
specialized in
designing of the
control system
KMU5:
specialized in
manufacturing
processes
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-743
RTD1:
specialized on
force control
RTD2:
specialized on
off-line robot
programming
OTH: Final user
specialized in
manufacturing
processes
Treatment of
waste from the
poultry industry
(litter poultry)
for the
production of
high value
fertilizer
KMUs of the
poultry sector
generating waste
as poultry litter
and manure,
commercializing
compost or
organic fertilizer
RTD: expert in energy
treatment for the
organic fertilizer
production, spain
RTD1: experts
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-774
in the analysis of
soil
microbiology
and plant
diseases.
RTD2: experts
in the BioOil use
to produce
energy in
pyrolysis
process.
Asociación de
Investigación de las
Industrias Cerámicas ITC,Slovenian
National Building and
Engineering
Civil Engineering
Highly Robust
Institute, Instituto de
Construction
Recursos Naturales y
Materials against
Agrobiología de
Biocolonization
Sevilla, Cerámica La
Escandella, S.A.,
NanoPhos SA,
MARMOR Hotavlje,
Ghent University
KMU: concrete
manufaturer,
provide the
materials for
testing and carry
out the tests on http://www.ncp-sme.net/Countries/ES/PS-SME-ES-771
different facades
in order to proof
the solution
proposed by the
project.
KMU1: Biopolymer
manufacturers
(focused on fireresistance biopolymer)
KMU2: Natural
fibres processors
Development of
light bio-based
environmental
friendly panels
to marine
furnishing
RTD: composites
fabrication, spain
KMU3:
Companies
related with
interior ship
building where
bio-based
product can
substitute
products based
on other raw
materials (fossil
based)
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-753
RTD1: Biopolymer
manufacturers
(focused on fireresistance biopolymer)
RTD2:
Manufacturers
of polymer
matrix
composites
OTH:Certificati
on Bodies
Automation Of
Capacity Based
Demand
Response in
Electricity
RTD: AIT, Athlone,
Ireland. Co-ordinator,
software engineering.
AIT provides expertise
in control,
KMU1and2:
aggregators of
demand who are http://www.ncp-sme.net/Countries/IE/PS-SME-IE-802
trading or have
ambitions to
Markets
management and
software engineering
of distributed systems,
including energy
management systems.
AIT will develop the
DRS.
SME: Dublin, Ireland:
EMS provider
trade on the
power exchange
in their
respecitive
geographical
markets, and
specialise in a
limited set of
DR asset types
(e.g. microCHP
and embedded
generation).
These will
specify the main
requirement
from a trading
viewpoint, run
the trial sites (2
envisioned) and
trade in the trial.
KMU3:provider
s of aggregation
systems (may
also be part of
the aggregator
role). These will
provide the
NOC for
software
development,
support the
software
development for
NOC related
issues and
deliver the NOC
with DRS to the
trials.
RTD1: provide
expertise in
trading
strategies and
market
mechanisms.
They will
develop the
trading
strategies and
software for the
DRS.
RTD2: provide
expertise in DR
process
automation.
They will
develop the
communication
infrastructure
and application
protocols for the
trial.
KMU1: Data
Integration
Data quality
management
plattform
KMU2: Data
KMU: Proventa AG Analysis
Software Design,
System Integration,
KMU3: IT
Data Integration,
Consultancy
Consultancy, Trainning
RTD: FH Erfurt Research and
Development
KMU1: Turkish
forging company
KMU2+3:Two
German companies
which provide
equipment for forging
companies
Resource
efficient process
chain for
complex high
duty forging
parts
RTD1: German
Institute specialised in
the field of induction
heating
http://www.ncp-sme.net/Countries/DE/PS-SME-DE-644
RTD1: Database
expertise
RTD2:
Development
and research
capacities
KMU1: forges
that are using
flashless forging
in production
KMU2: tool
manufacturing
KMU3: heating
KMU4:
automisation of
forging process
chains
http://www.ncp-sme.net/Countries/DE/PS-SME-DE-711
RTD2: Romanian
Institute specialised on
the characterisation of
KMU5:
metals
lubrication
RTD3: IPH is an
institute specialised in
designing process
chains and forging
processes
Integrated Direct
Part Marking for RTD: University of
Rapid
Technology Ilmenau
Manufacturing
KMU6:
integrated
cooling
KMU1:
Suppliers for
Rapid
Prototyping
machines and
controller
software,
http://www.ncp-sme.net/Countries/DE/PS-SME-DE-720
KMU2:
Suppliers and
developers of
materials for
rapid
technologies
(mainly plastic),
KMU3:
Suppliers for
CAD-based
software
engineering
(handling of
standardised
transfer
formats),
KMU4:Developers of
optical reading
devices (multi
code readers),
Functionalised
biomaterials for
surgery
RTD: Politecnico di
Torino
http://www.ncp-sme.net/Countries/IT/PS-SME-IT-759
RTD: envolved
in prostheses
manufacturing,
peptides
synthesis, invitro tests
net shape
manufactruing of RTD: Politecnico di
titanium and
Torino
cobalt devices
MOnoBlock
Long lastIng
prosThetic
device
KMUs:
envolved in
prostheses
manufacturing,
peptides
synthesis, invitro tests
KMU: envolved
in Nanopowders
production,
micro-mechanic
engineering,
biomedical
devices
manufacturing,
prostheses
manufacturing
http://www.ncp-sme.net/Countries/IT/PS-SME-IT-765
RTD: envolved
in Nanopowders
production,
micro-mechanic
engineering,
biomedical
devices
manufacturing,
prostheses
manufacturing
SME: Materials
fabrication:
RTD: Politecnico di
Torino
- glass synthesis,
wide-spectrum
glass powders
http://www.ncp-sme.net/Countries/IT/PS-SME-IT-762
technology;
- glass and
ceramic powders
sintering;
- rapid
prototyping
techniques for
fabricating
porous 3-D
ceramic bodies
of complex
architecture;
- controlled laser
sintering
techniques for
fabricating
porous 2-D/3-D
ceramic bodies;
- ceramic
prosthetic
elements
fabrication.
SME Materials
characterization:
- mechanical
behaviour of
glass-onceramic
coatings;
- theoretical
modelling of the
interfacial
mechanical
behaviour in
solid joints;
- theoretical
modelling of
osteintegration;
- in vitro tests
with bioreactors.
Long-term
Arthroprosteses
RTD: Politecnico di
Torino
KMU: envolved
in Prostheses
manufacturing,
tribological
tests,
tribocorrosion
tests
RTD: envolved
in Prostheses
manufacturing,
http://www.ncp-sme.net/Countries/IT/PS-SME-IT-768
tribological
tests,
tribocorrosion
tests
Home
monitoring for
Alzheimer
patients
Automatic noninvasive system
to determine
meat quality
before
processing
Innowacja Polska (PL)
(electronics +
management), EDMA
Innova (ES) (software
+ electronics),
Universitat Snta.
Caterina (dementia
unit) (ES) (Alzheimer
expert)
RTD1: Spain:
industrial design and
validation of the
proposed system.
RTD2: United
Kingdom: design of
the sensor
RTD3: Denmark:
reference method to
validate the sensor
system .
KMU1: Spain:
manufacturer of the
sensor system.
KMU2: Belgium:
network of customers
within the meat sector,
specifications and the
design of the sensor
system.
Wireless
monitoring
system for
underground
touristic
attractions
Innowacja Polska
(electronics +
coordinator), EDMA
Innova (software
electronics), Escola
Politècnica Mines
Manresa (UPC) minery expert
KMU1:
Assistive
technology
manufacturers
KMU2: Home
care company
KMU3:
Electronics
company
KMU4: Home
Alarms system
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-739
KMU: partners
(abattoirs or
meat processing
plants) who
have interest in
the participation
of a European
project for the
validation of a
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-745
new technology
for the
classification of
cuts of pork
meat according
to its
technological
quality
KMU1:
Industrial
minery
electronics
designer and
manufacturer
(system
definition,
electronics
development,
sensing)
KMU2:
Industrial
minery software
provider
(software
definition,
software
development,
expert
knowledge)
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-733
KMU3:
Industrial
minery systems
distributor
(system
definition and
distribution)
KMU4: Private
touristic
underground
attractions
(touristic
minery, touristic
caves, etc...).
KMU1:
Photocatalyst
manufacturer /
supplier of
soultions
tailored to air
and water based
applications.
KMU2: Air
purification
systems
manufacturer domestic type
systems
Photocatalysis
with UV LED
Sources for
Efficient Air
purification
Third level research
institution based in
Ireland.
KMU3: Air
purification
systems
manufacturer high end type
systems
http://www.ncp-sme.net/Countries/IE/PS-SME-IE-748
KMU4: Water
purification
systems
manufacturer domestic type
systems
KMU5: Water
purification
systems
manufacturer high volume
systems
a low cost
sorting solution
for the fruit
sector based on
the evaluation of
internatl fruit
quality
RTD1: University from
United Kingdom. They
will be involved in the
sensor development at
lab scale.
RTD2: Institut from
France. Sensor
KMU:
manufacturing
optical and/or
electronic
equipments,
willing to
exploit the
project results
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-714
development and
prediction algorithms.
by being
involved in the
manufacture of
RTD3: Dept. Industrial the sensor
modules.
Physics and
Electronics, CRIC S.A
– Spain. Prototype
KMU-AG:
design, test and
Industrial
integration.
Associations
(IAGs) and
SMEs
KMU1: France. SME
manufacturing sorting potentially
interested in the
machinery. They will
technology (endbe involved in tasks
users). They will
dealing with the
integration of the new collaborate in
the validation of
sensor in existing
the technology,
sorting equipments.
as well as in
training
KMU2: Odenberg
dissemination
Engineering Ltd –
tasks.
Ireland. SME
manufacturing sorting
machinery. They will
be involved in tasks
dealing with the
integration of the new
sensor in existing
sorting equipments.
Zincred,
reduction of
ZnCl2 in
picjkling HCL
soluions in
general
galvanizing
KMU1: an
Engineering Co.
able to design
and built a
KMU1: General
complete XS
Galvanizer, located in plant to be
Italy shall install a pilot installed in a
plant for ZnCl2
General
extraction and run
Galvanizing line
prolonged
for pickling bath
experimental
depuration from
campaigns for testing
ZnCl2 and HCl
the efficiency of the
acid recovery.
process
Plant
specification
will be supplied http://www.ncp-sme.net/Countries/ES/PS-SME-ES-728
KMU2: consulting
by other Partner
Company located in
within the
Italy who will be the
Project. The
Coordinator of the
Company should
Project.
be interested in
selling the setRTD: located in Italy
will provide all process up technolgy
within a
parameters for the
reference market
construction of the
to be agreed
Demonstration Pilot
with the other
Plant
Partners.
KMU2: a
Chemical Co,
for supplying all
chemicals for
the XS process,
able to suggest
appropriate
alternatives for
improving XS
and interested
for the
exploitation of
the technology
at the end of the
Project.
KMU1: rice
seed /breeding
KMU2:
producing
functional food
and/or food
ingredients;
Novel
applications of
rice-derived
compounds in
food and
cosmetics
RTD 1: Parco
Tecnologico Padano
KMU3:
(www.tecnoparco.org),
producing
Research Institute,
natural
Italy, rice genomics
cosmetics;
RTD 2: Research
performing SME,
Spain, functional
genomics
SME 1: manufacturer
of pharma and
cosmetic ingredients,
Italy
Tailortour:
Dynamic
commercial
tailor-made
systems for
tourist services
as roadmap for
integrating
sustainability
patterns
RDT: Tourism
research and training
institute based in UK.
KMUs: Tourismtechnology oriented
KMU from Spain.2
technological KMUs
from Greece and Italy
KMU4.
producing
specialty rice;
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-668
KMU5:
companies
(SMEs and
Large
Enterprises)
commercialising
rice grains, food
ingredients,
natural
cosmetics, plantderived
compounds.
KMU1: mention
the
specifications of
the tools to be
developed in the
project
KMU2: test and
validate the
prototype tools
developed
KMU3: compile
data from
destinations and
re-quailify it
into information
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-708
for the data
bases
KMU4: ensure
updated
information on
tourist consumer
behaviour
KMU: with
experience in
distributing/com
mercializing of
medical
equipments.
Surface
topography
based imaging
system for
scoliosis
diagnosis
evaluate and
predict the
bearing
performance far
beyond the
nominal
operation
conditions
Automatic
meeting
transcription and
summarization
with an adapted
ontology for the
legal domain and
business
administration
RRTD: with
expertise in
hardware
SMEs and RTD
development /
partners. Partners are
integration in
originated from
the area of
Cyprus, Greece, Spain,
imaging
Italy and Poland
technologies.
The partner is
planned to be
responsible for
both the design
and
development of
the hardware
component
system.
RTD: Spanish research
centre, virtual
prototyping tools for
the prediction of the
mechanical
performance of
bearings,
KMU: Spanish KMU
manufacturer of
tapered roller bearings
RTD1: Spanish R+D
center RTD2:
European University
expert in Automatic
Speech Recognition
2 European KMUs
with a technical Role
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-698
KMU:
fabrication of
bearings or
bearing-related
components
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-694
2 RTDs:
mechanical
performance,
wear, corrosion,
vibration,
fretting, coating,
etc.
KMU1:
Software
Development
with expertise in
the development
or adaptation of
Automatic
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-686
Speech
Recognition
Tools
KMU2:
Industrial sector:
Hardware
development
Main activity:
Development of
USB devices
including pendrives, headsets
and/or dockstations.
KMU3:
participate as
End-user SME.
Industrial sector:
Legal
assessment
RTD1:CTM Spain:
Project Leader, fault
condition
characterisation of the
materials
RTD2: UPC Spain:
product definition,
development of the
sensors,
Integrated
Acoustic
Emissions
Sensor with an
Innovative
Monitoring
System
KMU1: Spain: 1st
level KMU end user
KMU2: United
Kingdom: nondestructive testing by
acoustic emission.
KMU3: KMU France:
KMU supply of
sensors and equipment
for instrumentation
KMU4: KMU Estonia:
wireless sensor
systems using ZigBee,
sensor communications
networks
Development of
light structural
hybrid
composites for
manufacturing
civil armoured
vehicles for
security services
and human
protection
KMU1: that
produces
products of high
added value
KMU2: that has
a number of
processes with
various work
stations
KMU3: that
makes
mechanical
products
KMU4: that has
a problem with
mechanical
failures and
would see a
benefit in a
sensor that
monitors
structural
integratory of
moving parts
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-680
RTD: that works
with sensor
networks and
has experience
with power
harvesting of
sensors.
KMUs:
not specified
- Ballistic
Composites
manufacturer
industries,
- manufacturer
of ceramics,
high
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-662
performance
ballistic fibers
and textiles,
polymers);
-automotive
manufacturer,
- private security
company
RTDs:
Universities and
Technology
centres experts
in materials
testing and
characterization,
terminal
ballistic, in
composite
materials for
ballistic
applications, in
ceramic-faced
armour
for ballistic
composites.
RTD1: English
University, business
management,
operations and
knowledge
management
development of a
model of
customized
indicators, which
allows to select
compatible
partners within a
concrete market,
in order to create
enterprise
cooperation
networks.
RTD2: Spanish
University,
organizational
structures management
KMUs: from the
control.
leatherwork
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-656
field of activity
RTD3: Spanish
consultancy company,
Local Development
and Cooperation
Networks,
RTD4: Italian
Research Centre,
cognitive, social and
computational
sciences.
structural and
physiological
forest status
determination
through
unmannes aerial
vehicles, laser
Spanish SME: data
field collecting and
processing in canopy
structure.
KMU1: LIDAR
and Thermal:
Acquisition and
processing data
University:
Application of LIDAR
KMU2: Remote
sensing data
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-677
imaging
detection and
ranging
(LIDAR) and
thermal data
integration
high resolution data
and thermal imagery to
obtain spatial and
temporal variability in
canopy structure and
temperature (as
predictor of
biophysical
parameters).
analysis
KMU3:
Geographical
information
systems (GIS)
KMU4:
Environmental,
agricultural and
forestry
RTD1: LIDAR
and Thermal:
Acquisition and
processing data
RTD2: Remote
sensing data
analysis
RTD3:
Geographical
information
systems (GIS)
KMU1:
specialized in
the
manufacturing
and supply of
raw SLS
materials
(polyamides),
located in
Europe but not
in Spain.
Rapid
Manufacturing
of personalized
consumer goods
SME 1: manufacturer
of personalized
consumer goods in
Spain
KMU2:
specialized in
the
manufacturing
of equipment,
RTD1: Biomechanics materials and/ or http://www.ncp-sme.net/Countries/ES/PS-SME-ES-653
Institute in Spain
procedures for
the post
processes and/or
RTD2: Material
Development Institute finishes of
in the United Kingdom Rapid
Manufactured
(polyamide)
components
KMU3:
specialized in
post processing/
finishing Rapid
Manufactured
(polyamide)
components
enhancing its
mechanical
properties
KMU: Smart
textiles
manufacturer
RTD1: Instituto de
Biomecánica de
Valencia (Spain)
Robust noninvasive invehicle human
physiological
signal sensing
kMU: Supplier
of the embedded
electronics or
microelectronics
(preferably
already
supplying to
automotive
industry)
KMU: Seat
cover
RTD2: Research
manufacturer
Institute from UK
especialized on sensing
technologies (UK)
KMU: Seatbelt
(or key
component)
OTH: Large Spanish
manufacturer
Automotive TIER 1
Supplier (ROUTE-TOMARKET)
KMU: Steering
wheel (or key
component)
manufacturer;
KMU: Other
complementary
non-invasive
physiological
sensor supplier
(operating in
any sector)
http://www.ncp-sme.net/Countries/ES/PS-SME-ES-659