The Synergy 1 Low Profile system will stretch wrap any standard sized loads up to 80” using
Highlight’s patent pending Stretch-Set™ film delivery system. The Stretch-Set system precisely
controls film stretch from 60% to 125%, maximizing package strength and film economy while
allowing you to preset desired film stretch for repeatable stretch levels, load after load.
The Synergy 1 Low Profile is listed and described below:
Item
1
Quantity
Description
1
Synergy 1 Low Profile Standard Controls:
 Relay Logic Control
 Adjustable Film Force-to-Load
 AC vector drives with digital readout
 AC Motors
 65” diameter smooth turntable top (easy pallet jack
loading), 0 - 12 RPM
 Heavy Duty all Steel Construction
 80” Wrap Height Capacity
 120 Volt, 15 Amp electrical
2
1
3
1
Popular Options:
Upgrade Semi-Automatic Controls Package:
 Allen-Bradley MicroLogix 1000 PLC,
 Height Sensing Photo-Eye,
 Top and Bottom Wrap Counters and Table Home
Position.
Low Profile Ramp: used when loading with a manual or
electric pallet jack
Investment
$4,795.00
$1,495.00
$495.00
1
Project Conditions
F.O.B.: Wyoming, Michigan
TERMS: Net 30 days from shipment
DELIVERY: 3 - 4 weeks Estimated
QUOTATION VALID: 60 days, specifications subject to change without notice
WARRANTY: See 3 year limited warranty information
Proper guarding is critical for the safe operation of stretch wrap machinery. It is the customer's
responsibility to provide Highlight with the plant layout. Together we can determine the best
method to guard the machine. For those that do not, or in those cases when the customer does not
purchase the guarding from Highlight, the customer is fully responsible for obtaining the proper
guarding for their stretch wrap systems.
Thank you for your interest in the Synergy 1 Low Profile. Once you have had a moment to review
this information, we will be glad to answer any questions you or your staff may have. We look
forward to working on this project with you.
Sincerely,
2
Standard Synergy™ 1 Low Profile Specifications
Production Capacity:
10-20 loads per hour
56" X 56" X 80"
Load Capacities:
4000 Pound Load Capacity
1-12 RPM
Turntable Specifications:
2 5/8” Floor-to-Table Height
65" Diameter Turntable
½ HP AC Turntable Drive Motor
Adjustable V-Belt Table Drive
Adjustable Turntable Speed
3 Locking Ramp Positions
Film Elevator:
Single 5” Wide Belt Carriage Lift
Adjustable Height Overrides
Variable Up/Down Speed
¾ HP AC Elevator Lift Drive Motor
Film Delivery System:
Mechanical Constant Diameter Roller Brake
10" Diameter Roll Capacity
10" to 20" Roll Width Capacity
Operating Controls:
Carriage Auto/Manual Selector
Carriage Raise/Neutral/Lower Selector
Carriage Up/Down Speed Dial
Stop Push/Pull Button
Green Start Pushbutton
Turntable On/Off Selector
**Top & Bottom Wrap Counters **
Electrical
120V 15 AMP Electrical Input
Allen Bradley Switches
JIC standard
AC TEFC Motors
AC vector drives with digital readout
**Allen Bradley MicroLogix 1000 PLC **
**Micro-Switch Photo-eye **
** Semi-Automatic Control Package**
** Semi-Automatic Control Package**
3
SYNERGY™ LIMITED WARRANTY
LIMITED WARRANTY THREE (3) YEAR
Highlight Industries, Inc. warrants its Synergy manufactured by it, and sold pursuant
to this order, will be of merchantable quality, free from defects in material and workmanship
as determined at the date of shipment, by generally recognized, applicable and accepted
practices and procedures in the industry, for a period of three (3) years from the Highlight
invoice date, under normal use and service.
When the Purchaser gives Highlight written notice of any alleged defect within the
applicable warranty period, Highlight will, at its option repair or replace the same free of
charge F.O.B. its manufacturing plant, installation not included. Equipment replaced under
the warranty shall have the same warranty as new equipment but does not extend the
warranty of the original equipment.
Satisfaction of this warranty, consistent with other provisions herein, will be limited to the
replacement or repair or modification of, or issuance of a credit for, the equipment involved,
at Highlight’s option.
Highlight neither assumes nor authorizes any person to assume for it any other obligation in
connection with the sale of Highlight’s equipment.
This warranty shall not apply to any equipment which has been repaired or altered by unauthorized personnel in any way so as to, in the judgement of Highlight, affect serviceability,
or which has been subjected to misuse, negligence, accident, or to equipment made by
Highlight which has been operated in a manner contrary to Highlight’s instructions.
In no event regardless of the cause, shall Highlight be liable for penalties or penalty clauses
of any description or any damages resulting from loss of profits, use of products or for any
incidental indirect or consequential damages, even if advised of the possibility of such
damages. This limitation of Highlight’s liability will apply regardless of the form of action,
whether in contract or tort, including negligence. Any action against Highlight must be
brought within twelve (12) months after cause of action accrues.
“THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES WHETHER
EXPRESSED, IMPLIED OR STATUTORY INCLUDING IMPLIED WARRANTIES OF
MERCHANTABILITY OF FITNESS AND EXTENDS ONLY TO THE BUYER OR
CUSTOMER PURCHASING FROM HIGHLIGHT OR AN AUTHORIZED
HIGHLIGHT DISTRIBUTOR.”
4
SYNERGY 1 LOW PROFILE
SYSTEM SPECIFICATIONS*
Turntable Drive Motor .............. 1/2 HP, 90 VAC, Leeson
Turntable Speed .......................... Adjustable to 10 RPM
Wrap Height ................................................. to 80 Inches
Spiral Lift Motor ....................... 3/4 HP, 90 VAC, Leeson
Load Weight Capacity...............................4,000 Pounds
Electrical Voltage ............................ 120 Volts, 15 Amps
Control Logic:
Manual System ........................................Switch Controlled
Semiautomatic System ..... Allen-Bradley MicroLogix PLC
Total Weight of Machine ...........................1,220 Pounds
(1,450 Pounds with optional Ramp)
*Subject to change without notice.
5