Material Safety Data Sheet
EMERGENCY: 1-800-424-9300 (CHEMTREC)
The information in this MSDS has been obtained from a number of reputable sources. However, its
accuracy cannot be guaranteed. It is the user's responsibility to evaluate the information and use it in
a prudent manner for its particular purpose. AGRESEARCH, INC. assumes no liability for the use of this
information.
I.
GENERAL INFORMATION
Date Issued:
05/01/10
Product Name:
Maxi-Bond L-100
Product Code:
0310
Product Description: A complex proprietary mixture of pelleting aids.
This product is exempt from declaration on the feed label as a pelleting aid under FDA
Regulation 501.100 (3)(ii)(c), 21 CFR..
This substance is approved for use in animal feeds and is listed by AAFCO under 87.19 (Urea
Formaldehyde Condensation Polymer) as a pelleting aid for use in animal feeds …not to
exceed 0.1 ppm free formaldehyde in finished product.
This substance is approved for use in animal feeds and is listed by AAFCO under 87.2 (Lignin
Sulfonate Dehydrated ) as a pelleting aid for use in animal feeds …not to exceed 4% in
finished pellets.
II.
HAZARD RATING
Health: 1
0- Least
III.
1- Slight
Fire: 0
Reactivity: 0
2- Moderate
3- High
Physical State:
Dry Powder
Color:
Dark Brown
Odor:
Characteristic aroma
Specific Gravity:
n/a
Solubility:
12% in water
pH:
n/a
4- Extreme
AGRESEARCH INC.
ONE GENSTAR DR. JOLIET IL 60435
PH: 815-726-0410 FAX: 815-726-0521
1
e-mail: agresearchinc@aol.com
IV.
FIRE AND EXPLOSION HAZARD DATA
Flash Point:
n/a
Extinguishing Media: Use water, CO2 or dry chemical.
Special Fire
Fighting Procedures: Wear self-containing breathing apparatus and protective clothing to
prevent contact with skin and eyes. Keep fire exposed containers cool.
Unusual Fire and
Explosion Hazards:
Materials and
Conditions to Avoid:
V.
Combustion will produce carbon dioxide and possible carbon monoxide.
Normally stable under proper storage conditions. Avoid excessive
heat, open flames or other sources of ignition.
REACTIVITY DATA
This material presents no significant reactivity hazard. Hazardous polymerization will not
occur, and it will not react violently with water.
VI.
HAZARDOUS INGREDIENTS INFORMATION
The identity of individual compounds of this mixture is proprietary information and is regarded
to be a trade secret pursuant to section 1910.1200 of Title 29 of the Code of Federal
Regulations.
Contact with eyes and skin may produce irritation.
Threshold limit value (TLV) is unknown.
OSHA permissible exposure limit not established.
Hazardous Components
1. Formaldehyde
VII.
Not more then % by weight in feed
0.00018
FIRST AID PROCEDURES
Eye Contact:
Hold eye open and rinse slowly and gently with water for 15-20
minutes. Remove contact lenses, if present, after the first 5 minutes,
then continue rinsing eye. Call a poison control center or doctor for
treatment advice.
Skin Contact:
Remove contaminated clothing and wash contaminated skin with
plenty of water for 15-20 minutes. Call a poison control center or
doctor for treatment advice.
2
VIII.
Inhalation:
Move person to fresh air. If person is not breathing, call 911 or an
ambulance, and then give artificial respiration, preferably mouth-tomouth if possible. Call a poison control center or doctor for further
treatment advice.
Ingestion:
Call a poison control center or doctor immediately for treatment advice.
Have person sip a glass of water if able to swallow. Do not induce
vomiting unless told to do so by a poison control center or doctor. Do
not give anything by mouth to an unconscious person
PERSONAL PROTECTION
Respiratory:
None should be needed in a well ventilated area. In case of high dust
levels, use a dust filter or an organic vapor type respirator.
Eyes:
Wear protective eyewear (goggles or face shield).
Ventilation:
Adequate ventilation should be provided.
Other
Precautions:
IX.
Use of chemical resistance gloves is recommended. Good industrial
hygiene practices should be maintained. A safety shower and eye bath
should be available.
SPILL, RELEASE AND WASTE DISPOSAL PROCEDURES
Collect material into an approved disposal container. Rinse area with copious amount of
water. Dispose of waste material in accordance with local, state, and federal regulations.
X.
HANDLING AND STORAGE PROCEDURES
Store in a cool, dry area protected from direct sunlight.
Keep away from heat and flame.
Keep container closed when not in use.
Use with adequate ventilation.
End of MSDS
AGRESEARCH INC.
ONE GENSTAR DR. JOLIET IL 60435
PH: 815-726-0410 FAX: 815-726-0521
e-mail: agresearchinc@aol.com
3