TWO BID TENDER
TENDER FOR INTERIORS WORKS
at
NERADIGONDA BRANCH
STATE BANK OF HYDERABAD
FINANCIAL BID
Last date for submission of Sealed Tender: Before 3.00 PM on 13.10.14
Opening of Sealed Tenders: At 4.30PM on 13.10.14
Tender to be submitted to:
THE DY. GENERAL MANAGER,
STATE BANK OF HYDERABAD,
NIZAMABAD ZONAL OFFICE,
3RD FLOOR, RUKMINI CHAMBERS,
VINAYAKNAGAR, NIZAMABAD-503003
Issued to:
________________________________________________________________________
BILL OF QUANTITIES ( Schedule “F” )
Tender schedule for Interior works at NERADIGONDA BRANCH
Sr.
1
2
3
Items
COMPUTER CLERICAL COUNTER
Manufacturing, supplying and fixing of computer counter made
to shape as per approved design / drawing / size (4.5 ft. approx.
W x 2.5 ft. H x 3.0 ft. D) and made with necessary 19mm
Plywood (of approved make) frame work having one side 16"
wide storage unit consisting of 4 Nos. of sliding 5.0” deep
drawers with telescopic channels and locking arrangement.
1.0mm thk laminate of approved shade shall be provided on top
of counter. Arrangement for CPU stand, keyboard drawer, foot
rest and cable manager to be provided. All visible surfaces shall
be laminated with 1.0 mm thick laminate of approved shade and
make. All invisible surfaces of plywood shall be laminated with
0.8 mm thick laminate of approved shade and make. All
exposed edges of plywood shall be fixed with teakwood beading
finished with zinc oxide polish of matching color and a footrest of
4" x 1.5" teak wood section shall be provided with dully polished.
Cost of drawer locks (to be operated with single key) handles
and other necessary hardware’s should be considered.
COMPUTER CASH COUNTER
Providing and erecting computer cash counters as per
specification of above said computer clerical counter. In
addition, an in-built Service top of 15” wide will be provided in
the frame work at 1.5’ height from the table top and laminate of
appropriate colour and shade shall be fitted on service top.
Further, 12 mm thick float glass with specified cutout hole shall
be provided on service top till 7’ ht and fixed in 1.0’ high wooden
frame with MDF beading of 1” x 0.5” size. All beading surfaces
to have zinc oxide polish of matching colour. The 12 mm thick
glass shall have etching work done as per the drawing /
instruction of engineer –in-charge .
PARTLY GLAZED WOODEN PARTITIONS 12mm Glass
Manufacturing, supplying and fixing wooden partitions in
approved design / drawing up to required height (8 ft or
ceiling/beam bottom ht.) & made of 2.5" x 1.5" M. sal wood or
equivalent or aluminum section vertical supporting members
spaced approximately at 2.0' to 3.0' c/c (c/c distance to be
adjusted as per drawings, door/opening positions) and joined
with Horizontal members of 2.5" x 1.5" M. sal wood or equivalent
or aluminum section and spaced approximately at 1.5’ to 2.0’ c/c
subject to site instructions. solid portion of partitions will be
covered with 6mm Plywood of approved make on both sides.
Partition shall be glazed up to 7.0 ft ht. above the 0.50 ft ht.
from floor level. Glazed portion of partition shall be done with 12
mm plain float glass of approved make with etching work (acid
wash) as per design and glass is to be fixed in MDF strip of 1”x
0.5” section and polished with zinc oxide polish to match color of
laminate. solid portion of partitions will be laminated on both
Rate
( Rs. )
Qty.
Unit
6.2
r. mt.
1.8
r. mt.
38
sq.mt
Amount
4
sides with approved make laminate of 1.0 mm thickness with
fixing adhesive etc. Vertical and horizontal groves as per
drawing /site conditions. Design / pattern of partition shall be as
per approval of engineer-in-charge. cost to include all material
and Labour charges.
PARTLY GLAZED WOODEN PARTITIONS 8 mm Glass
89
sq.mt.
Manufacturing, supplying and fixing wooden partitions in
approved design / drawing up to required height (8 ft
or ceiling/beam bottom ht.) & made of 2.5" x 1.5" M.
sal wood or equivalent or aluminum section vertical
supporting members spaced approximately at 2.0' to
3.0' c/c (c/c distance to be adjusted as per drawings,
door/opening positions) and joined with Horizontal
members of 2.5" x 1.5" M. sal wood or equivalent or
aluminum section and spaced approximately at 1.5’
to 2.0’ c/c subject to site instructions. solid portion of
partitions will be covered with 6mm Plywood of
approved make on both sides. Partition shall be
glazed up to 7.0 ft ht. above the 0.50 ft ht. from floor
level. Glazed portion of partition shall be done with 8
mm plain float glass of approved make with etching
work (acid wash) as per design and glass is to be
fixed in MDF strip of 1”x 0.5” section and polished
with zinc oxide polish to match color of laminate.
solid portion of partitions will be laminated on both
sides with approved make laminate of 1.0 mm
thickness with fixing adhesive etc. Vertical and
horizontal groves as per drawing / site conditions.
Design / pattern of partition shall be as per approval
of engineer-in-charge. cost to include all material and
Labour charges. .
5
PARTLY GLAZED WOODEN LOW HT PARTIONS
12mmGlass
Manufacturing, supplying and fixing wooden partitions up to 4.0
ft. height in approved design & made of 2.5" x 1.5" M. sal wood
or equivalent or aluminum section vertical supporting members
spaced approximately at 2.0' to 3.0' c/c (c/c distance to be
adjusted as per drawings, door/opening positions) and joined
with Horizontal members of 2.5" x 1.5" M. sal wood or equivalent
or aluminum section and spaced approximately at 1.5’ to 2.0’ c/c
subject to site instructions. solid portion of partitions will be
covered with 6mm Plywood of approved make on both sides.
Partition shall be glazed up to 4.0 ft. ht. above the 3.0 ft. ht.
from floor level . Glazed portion of partition to be done with 12
mm plain float glass of approved make with etching work (acid
wash) as per design and glass is to be fixed in MDF strip of
1”x0.5” section and polished with zinc oxide polish to match
color of laminate. solid portion of partitions will be laminated on
both sides with approved make laminate of 1.0 mm thickness
with fixing adhesive etc. Vertical and horizontal groves as per
drawing /site conditions. Design / pattern of partition to be as
per approval of engineer-in-charge. cost to include all material
and Labour charges.
5
sq.mt.
6
SOLID WOODEN PARTITION
Manufacturing, supplying and fixing wooden partitions up to 7.0
ft. height in approved design & made of 2.5" x 1.5" M. sal wood
or equivalent or aluminum section vertical supporting members
spaced approximately at 2' to 3' c/c (c/c distance to be adjusted
as per drawings, door/opening positions) and joined with
Horizontal members of 2.5" x 1.5" M. sal wood or equivalent or
aluminum section and spaced approximately at 1.5’ to 2.5’ c/c
subject to site conditions. Solid portion of partitions will be
covered with 6mm Plywood of approved make on both sides
and shall be laminated on both sides with approved make
laminate of 1.0 mm thickness with fixing adhesive etc. Vertical
and horizontal groves as per drawing /site conditions.
Design/pattern of partition and color of laminate to be as per
approval of engineer-in-charge. cost to include all material and
Labour charges.
QRO
sq.mt.
8
FULLY GLAZED DOOR WITH FLOOR SPRING
Supplying and Fixing of Glass door in approved position. The
door shall be made of 12 mm thick float glass & the glass shall
be fitted in a 6 inches wide C – frame made with two layers of
19mm plywood & one layer of 12mm plywood and the height of
C – frame shall be as per site condition. The 12mm plywood
member shall be sandwiched from it’s both sides by the two18
mm plywood members and the joints shall be made as per the
drawing and instructions of the engineer-in-charge. The door
shall be fixed on heavy duty floor spring hinges and with 2 Nos.
of 18 inch S.S. handles, one dead lock with three keys, its
fittings and fixtures, etc. complete all of approved make. The 12
mm thick glass shall have etching work (acid wash) done on it
as per the drawing. Door handle shall be of Kich Industries
make, stainless steel, AISI 316 grade pull handles, 22 mm dia x
300 mm STAIN CODE PHI 2212 S and shall be fixed in position.
The cost to include all fixtures, 6-lever Godrej lock, Labour etc.
complete and all as per design and approval of the Engineer in
charge.
7
sq. mt
9
DOOR ( Glazed / Grilled ) WITH FLOOR SPRING
Supply and fixing of 35 mm thick. Solid core door shutter of
approved make and laminated with 1.0 mm laminates of
approved shade and make on both sides. The door shall be
glazed with 8 mm float glass (having etching work) Glazed /
grilled portion of door shall be done in the same line / pattern as
of the partition to which it is fixed. All open edges of door shall
be leaped with M. Teak Wood beading. The door shall be fitted
with floor spring of approved make with top pivot, brush steel
finish handle, 6 lever mortise lock set of three keys and all other
fittings and fixture etc. complete and as per design and approval
of Engineer-in-charge.
6
no.
10
EXECUTIVE WORK STATION
Manufacturing and supplying Executive work station with 12mm
glass top fixed on 3” SS stud of over all size of 6.0’ x 2.5' x 2.5'
and made with necessary 19mm Plywood (of approved make)
frame work having one side 16" wide storage unit consisting of
Four 5" deep sliding drawers. In the table. Arrangement of CPU
stand, key board drawer, cable manager and foot rest of 4" x
1.5" sal wood section shall be provided and the three edges of
front fascia shall be 1.5" thick with additional ply and leaped with
necessary teak wood beading dully polished. All drawer shall be
fitted with telescopic channels and locking arrangement and
cupboards shall have locking arrangement and all exposed
edges of plywood shall be fitted with teak wood beading duly
polished. All beading shall have zinc oxide polish of matching
color. All visible surfaces shall be laminated with 1.0mm
laminates of approved shade and make and all invisible
surfaces to be laminated with 0.8 mm laminate of approved
shade and make. The rates should include locking arrangement
(to be operated by single key) for all drawers and cupboard
along with best quality 4” brush steel handles, sliding channel
with roller + ball bearing arrangements etc. complete. Cost
should also inclusive of paneling, lapping of edges with plywood
to achieve thickness as per Engineer-in-charges design.
1
no.
11
OFFICERS WORK STATION
Manufacturing and supplying officer work station of over all size
of 5’6’’ x 2’6’’ x 2'6” and made with necessary 19mm Plywood (of
approved make) frame work having one side 16" wide storage
unit consisting of Four 5" deep sliding drawers. In the table,
Arrangement of CPU stand, key board drawer, cable manager
and foot rest of 4" x 1.5" teak wood section shall be provided
and the three edges of front fascia shall be 1.5" thick with
additional ply and leaped with necessary teak wood beading
dully polished. All drawer shall be fitted with telescopic channels
and locking arrangement and cupboards shall have locking
arrangement and all exposed edges of plywood shall be fitted
with teak wood beading duly polished. All bidding shall have zinc
oxide polish of matching color. All visible surfaces shall be
laminated with 1.0mm laminates of approved shade and make
and all invisible surfaces to be laminated with 0.8 mm laminate
of approved shade and make. The rates should include locking
arrangement for all drawers and cupboard along with best
quality 4” brush steel handles, sliding channel with roller + ball
bearing arrangements etc. complete. Cost should also inclusive
of paneling, lapping of edges with plywood to achieve thickness
as per Engineer-in-charges design.
2
no.
12
CLERICAL WORK STATION
QRO
No.
2.0
r. mt.
4
no.
Manufacturing and supplying clerical work station of over all size
of 5’0’’ x 2’6’’ x 2'6” and made with necessary
19mm Plywood (of approved make) frame work
having one side 16" wide storage unit consisting of
Four 5" deep sliding drawers. In the table,
Arrangement of CPU stand, key board drawer,
cable manager and foot rest of 4" x 1.5" teak wood
section shall be provided and the three edges of
front fascia shall be 1.5" thick with additional ply
and leaped with necessary teak wood beading
dully polished. All drawers shall be fitted with
telescopic channels and locking arrangement and
cupboards shall have locking arrangement and all
exposed edges of plywood shall be fitted with teak
wood beading duly polished. All bidding shall have
zinc oxide polish of matching color. All visible
surfaces shall be laminated with 1.0mm laminates
of approved shade and make and all invisible
surfaces to be laminated with 0.8 mm laminate of
approved shade and make. The rates should
include locking arrangement for all drawers and
cupboard along with best quality 4” brush steel
handles, sliding channel with roller + ball bearing
arrangements etc. complete. Cost should also
inclusive of paneling, lapping of edges with
plywood to achieve thickness as per Engineer-incharges design.
13
COMPUTER WORK STATION
Supplying and fixing of Computer desks of 2.5’ H x 2.0' D size in
the given length as per drawing and made with 19mm Plywood
(of approved make) frame work having one 15" wide storage
unit at every 4.0’ length. Arrangement of CPU stand, key board
drawer, cable manager and foot rest of 4" x 1.5" teak wood
section shall be provided. Each storage unit shall consist of four
sliding drawers of 5" depth & the drawers shall be fitted with
telescopic channels and locking arrangement and all exposed
edges of ply wood shall be fitted with teak wood beading duly
polished. All bidding shall have zinc oxide polish of matching
color. All visible surfaces shall be laminated with 1.0mm
laminates of approved shade and all invisible surfaces to be
laminated with 0.8 mm laminate of approved shade and make.
The rates should include locking arrangement for all drawers
and cupboard along with best quality 4” brush steel handles, etc.
complete. Cost should also inclusive of paneling, lapping of
edges with plywood to achieve thickness as per design and
approval of Engineer-in-charges.
14
CREDENZA / SIDE RUNNERS
Manufacturing and supplying side credenza of 4.0’ x 1’-5” x 2’-3”
over all size made with 19mm Plywood (of approved make)
frame work having 15” wide and 5” deep drawers on upper side
and below to drawers, the cupboard unit shall be with sliding
shutter & adjustable shelf all along the full width of the credenza.
All drawers shall be fitted with telescopic channels and locking
arrangement and cupboards shall have locking arrangement
and all exposed edges of plywood shall be fitted with teak wood
beading duly polished. All bidding shall have zinc oxide polish of
matching color. All visible surfaces shall be laminated with
1.0mm laminates of approved shade and all invisible surfaces to
be laminated with 0.8 mm laminate of approved shade. The
rates should include individual locking arrangement (to be
operated by single key) for all drawers and cupboard along with
best quality 4” brush steel handles, sliding channel with roller +
ball bearing arrangements etc. complete. Cost should also
inclusive of paneling, lapping of edges with plywood to achieve
thickness as per design and approval of Engineer-in-charges.
15
CUPBOARDS / STORAGE UNITS - of 2.75 ft height
Manufacturing, supplying and fixing of box type cupboards /
storage units of required, sizes and as shown in the drawing and
of 1' 5" depth and made out of 19 mm thick Plywood all-round
and 8 mm Plywood of approved make at the back. The19mm
Plywood shelves / compartments shall be provided at 15" c/c
horizontally and 3' 0" c/c vertically. The unit shall have hinged
type shutters on the front made out of 19 mm Plywood with
approved quality concealed hinges, locks tower bolts, knobs all
as per approved quality. All external surfaces to be laminated
with 1.0 mm thick laminate and all internal surfaces to be
laminated with 0.8mm thick laminate of approved shade &
make. Front edges of shelves and all exposed edges of
plywood to be leaped with teak wood finished with polish.
Footing to be made of 2.5" x 1.5" teak wood frame covering all
four sides of bottom surface and covered with 6 mm Plywood of
approved make and 1.0 mm thick laminate of same shade.
10
sq.mt
16
CUPBOARDS / STORAGE UNITS - of 4.5 ft height
10
sq.mt
Manufacturing, supplying and fixing of box type cupboards /
storage units of required, sizes and as shown in the
drawing and of 1' 5" depth and made out of 19 mm
thick Plywood all-round and 8 mm Plywood of
approved make at the back. The19mm Plywood
shelves / compartments shall be provided at 15" c/c
horizontally and 3' 0" c/c vertically. The unit shall
have hinged type shutters on the front made out of
19 mm Plywood with approved quality concealed
hinges, locks tower bolts, knobs all as per approved
quality. All external surfaces to be laminated with 1.0
mm thick laminate and all internal surfaces to be
laminated with 0.8mm thick laminate of approved
shade & make. Front edges of shelves and all
exposed edges of plywood to be leaped with teak
wood finished with polish. Footing to be made of
2.5" x 1.5" teak wood frame covering all four sides of
bottom surface and covered with 6 mm Plywood of
approved make and 1.0 mm thick laminate of same
shade.
17
VERTICAL BLINDS
4” Vertical blinds of std. make aerolux or equivalent make with
acrylic rod and accessories with slates of approved make
selection of colour, pattern and make is as per Engineer-incharges suggestions. (As per design and approval of Engineerin-charge).
8
sq.mt.
18
WRITING DESK CUM VOUCHER RACK CUM CHEQUE
COLLECTION BOXES : Manufacturing and supplying
of writing desk cum voucher rack cum cheque
collection boxes made to shape and 4’x4’x1’size as
given in drawing & design. and the unit shall be
fixed in position as per site conditions and
instructions. The unit shall be made of 19 mm and 8
mm thick plywood (as shown in drawing) and all
exposed surfaces of plywood shall be laminated with
1.0 mm thick laminate of of approved shade and
make. The sides of the unit / boxes shall be made of
19 mm thick plywood, where as top, bottom, front
and back of the unit / boxes shall be made of 8mm
thick plywood and the boxes shall have slot (for
dropping of cheques) and door / shutter with lock
arrangement (for collection of cheques) in position
and as given in the drawing. The unit shall rest on 2”
x 1” wooden framework recessed at bottom of boxes.
The Unit shall be fitted with 2.5’ x 1.5’ size 12 mm
thick float glass of approved make and shape as
given in the drawing (with necessary hardware) for
the use as writing surface. Vertical glasses of 8 mm
thick float glass shall be provided at position and in
the shape as given in the drawing.
1
no.
19
DISPLAY BOARD CUM INFORMATION UNIT
Manufacturing and supplying of display board cum information
unit of 4’x2.5’ size & made to shape as given in the drawing and
design. The unit shall be fixed in position as per instruction and
site condition. This unit shall be made of 12 mm ply board fitted
to wall with rawl plug / guttis and hardware. The 12 mm ply
board shall be covered with 6 mm thick soft particleboard,
including synthetic / cotton designer fabric (Rs.100/metre) etc.
complete. The all four sides of the 12 mm plywood shall be
fitted with 2” wide border made of 18 mm thick ply wood in the
shape and design as shown in the drawing. The all exposed
faces of the plywood shall be laminated with 1.0 mm thick
laminate of approved shade and make. The color& pattern of
1
sq.mt.
fabric shall be as per approval of the Engineer in Charge.
20
WOODEN CLADDING (Frame work / 18mm)
55
sq.mt.
175
sq.mt.
Column paneling with 2" x 1" salwood/equivalent sections batten
framework with wood sections spaced @ 2.0 ft c/c
(or less as per site condition) in both vertical and
horizontal ways and fixed to the wall with rawl plugs /
guttis. The wooden frameworks to be covered with
6mm Plywood of approved make and laminated with
1.5 mm thick laminate of approved make and shade.
The necessary provision in wooden framework for
running of Electrical conduit has to be made.
Providing and fixing 18mm Plywood of approved make wood
through fascia made to shapes at the walls / sides of column as
per site condition and instructions with necessary rawl plugs /
guttis and Hardwares. All visible surface to be laminated with
1.0mm thick laminates of approved make and shade. Finish as
per instructions including all fixing member, rawl plugs
adhesives etc. complete.
21
22
23
FALSE CEILING (GRID TYPE)
Providing and fixing in true horizontal level false ceiling grid
system of Lafarge Boral / USG/ Indiagyp make or equivalent,
suspended on interlocking metal frame based grid system made
of hot dip galvanized steel sections as per manufacturers
specifications including making opening for electrical and AC
fitting complete as directed . The suspension system shall be –
main runner of 3000mm spaced at 1200mm center fixed to soffit
by hangers at 1200mm distance. First and last hanger should
less or450mm from the adjacent wall. 1200mm cross tees to be
interlocked between main runner at 600mm c/c.600mm x
6oomm module to be formed by fixing 600mm cross tee, 19mm
wall angle to be secured to wall , 450mm center suspension to
be done by using soffit cleat, adjusting clip etc as per
manufacturers specification.
WHEEL STAND CHAIRS - Manager Chair
Providing and supplying with 5 wheel stand chairs of approved
make like Godrej / Featherlite with height adjustment,
polyurethane arms five pronged based with castors high density
rubberized foam for back and seat with good quality synthetic
upholstery of specified colour / shape / design as approved by
Engineer-in-charge etc. complete.
WHEEL STAND CHAIRS - Officer Chair
Providing and supplying with 5 wheel stand chairs of approved
make like Godrej / Featherlite with height adjustment,
polyurethane arms five pronged based with castors high density
rubberized foam for back and seat with good quality synthetic
upholstery of specified colour / shape / design as approved by
Engineer-in-charge etc. complete.
1
no.
2
no.
24
25
26
27
WHEEL STAND CHAIRS - Junior Officer Chair
Providing and supplying with 5 wheel stand chairs of approved
make like Godrej / Featherlite with height adjustment,
polyurethane arms five pronged based with castors high density
rubberized foam for back and seat with good quality synthetic
upholstery of specified colour / shape / design as approved by
Engineer-in-charge etc. complete.
WHEEL STAND CHAIRS - Visitor Chair
Providing and supplying with out wheel stand chairs of approved
make like Godrej / Featherlite with height adjustment,
polyurethane arms five pronged based with castors high density
rubberized foam for back and seat with good quality synthetic
upholstery of specified colour / shape / design as approved by
Engineer-in-charge etc. complete.
THREE SEATER PERFORATED SHEET CHAIR
Providing and supplying Three Seater Perforated Sheet chair of
approved make mounted M.S. pipe frame with arms and of
specified colour / shape / design as approved by Engineer-incharge etc. complete.
Glass facia on Cash counter:
12mm thick plain float glass with etching (cost of etching `
40/- per Sft) and of ht. 18” with curve design is to be fitted
over the working top along the length of the counter with
necessary steam beach wood supports finished with
melamine polish shall be provided. The glass should have
specified cutout hole (arch) in all counters. Glass edges
should have crystal polishing. Cost should also inclusive of
paneling, lapping of edges with plywood to achieve 40mm
thickness and 40mm steam beach beading and melamine
polish as per design and approval of Engineer-in-charges.
5
no.
7
no.
5
no.
2
Sqmt
TOTAL
DISCOUNT OFFERED
TOTAL AMOUNT
EMPLOYER
NAME OF THE AGENCY WITH SEAL
APPROVED BRANDS / MAKES
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
PLYWOOD 100% GURJAN BWP GRADE ISI : Greenply / Euro /Samrat / Mayur /Century /Archid/Guardian.
LAMINATE : ROYAL TOUCH , FORMICA , GREENLAM,MERINO,SAMRAT,SUNMICA
MDF BOARD - GRADE-II , IS 12406 of 2003 : NUWUD , DURATUFF.
LOCKS : GODREJ, EBCO, DOOSET for Doors , Storages.
CHANELS : EBCO (Telescopic Cromium Plated)
MAIN DOOR / DOOR / STORAGE DOOR HANDLES: DORSET , KITCH.
DOOR CLOSER/ FLOOR SPRING : DORSET,GODREJ,HARDWIN
GYPSUM BOARD: INDIA GYPSUM , BORAL PASTER BOARD.
24"X24" GRID CEILING BOARD: ARMSTRONG,INDIA GYPSUM,LAFARGE/BORAL
GLASS : MODI FLOAT, SAINT GOBAIN.
VERTICAL BLINDS ( WITH SCOTCH GUARD ): VISTA,MAC,MARC,MARVEL
WALL PAINTS: ICI VELVET TOUCH , ASIAN ROYALE EMULSION.
TEXTURE ( Exteriors and Interiors ): SPECTRUM , WALL TEXTURES.
ROLLER TEXTURE: ICI DUET, BURGER PAINTS.
WOODEN FRAME/ BEADING: STEAM BEECH WOOD.
VETRIFIED TILES 24"X24": RAK CERAMICS, VARMORA, ASIAN.
GROUTING/ADHESIVE FOR VETRIFIED TILES: LATICRATE, FOSROCK.
CERAMIC FLOOR / WALL TILES ; JOHNSON, KAJARIA, SOMANY.
TOILET FITTINGS: CERAWARE, HINDWARE, PARRY WARE.
TAP FITTINGS: ESS ESS , MARC, PARRY WARE.
FOAM : KING FOAM.
UPHOLSTRY: HARMONY
CHAIRS: GODREJ, WIPRO,EUROTEC.