Tracy Stanley’s Class Supply Lists
Tracy has a limited set of tools that can be rented by her students for $10 per class.
Email Tracy with your order: Tracy@WiredArts.net
All kits must be reserved 2 weeks before the cruise to assure receiving one.
All rental tools must be reserved before February 17th.
Payment: kits will be paid for in class.
Accepted payments: cash, credit card, check.
Important Note on Tools:
The following list of tools is very important for a successful class. Please let me know if you
don’t have something in the required list. I have a very limited number of extra things I can bring,
but I will have to charge to cover the shipping of these items.
***I would encourage you to bring your own tools as you won’t have to wait for the limited class
tools.***
Class Instructions:
I will be sending the instructions for you class to you via email. You can print it off and bring it
with you if you want, but it isn’t necessary to have in class.
RIVETED COLLAGE KIT
$40.00
Charms will vary and there will be extras for purchase in class
Bring something to hang your collage on-chain, ribbon, or leather.
I will have some things for sale in class.
If you don’t want to buy a kit you will need to bring the following.
Supplies:
1-brass, 1 copper sheet- 24g- 3”X3”
Charms with flat backs- mixed metals-6 or more & spacers with holes that fit 14g
Copper 14g 1ft
4-brass escutcheon pins size 16
6” copper tubing- 1/8” diameter
1/16 eyelets-long
3 18g jump rings 5mm
1 14g jump ring 6mm
Pro polish pad or polishing cloth
Tools required: bench block, a bench block pad or small washcloth, household hammer (I
recommend the small stubby hammer that can be purchased from harbor freight), riveting
hammer or chasing hammer, rubber or latex gloves, 5 pieces of paper towel, a towel or cloth
placemat to work on and protect the table.
Optional tools:
I will have 3 of each- saws and bench pins, shears, metal file, metal hole punch, plastic mallet,
heavy duty wire cutters, letter and design stamps.
RIVETS AND CLUSTERS
Earring kit: $30.00
Bracelet kit: $35.00
If you don’t want to buy a kit then you will need to bring the following:
For Bracelet:
Copper and brass 24g sheet metal- 2”x2” or larger
Copper wire 14g- 1ft
Copper wire 18g- 11/2ft
4- brass escutcheon pins size 16
30 or more- 24g head pins
30 or more mix of beads 4mm to 8mm- these can be pearls, crystals, stone or metal
2- 10 to 12mm beads roundel shaped with holes large enough to put 18g through
Pro polish pad or polishing cloth
For earrings:
Copper and brass 24g sheet- 1”x1” or larger
20g copper wire- 2ft
16g copper wire- 6 inches
1/16 size eyelets- medium length
24 or more 24g head pins
2 sets of 12 beads or more- 4-6mm size - these can be crystal, pearl, stone or glass
2 ear wires
2 18g jump rings- 4mm or smaller
Tools required: Round nose, chain nose, wire cutters, bench block, a bench block pad or small
washcloth, household hammer (I recommend the small stubby hammer that can be purchased
from harbor freight), riveting hammer or chasing hammer, rubber or latex gloves, 5 pieces of
paper towel, a towel or cloth placemat to work on and protect the table.
Optional tools:
Flat nose pliers, shears, metal file, metal hole punch, plastic mallet, heavy duty wire cutters (for
bracelet), letter and decorative stamps.
STAMPED CHARMS
KIT: $25.00
Charms will vary and there will be extras for purchase in class
If you don’t want to buy a kit you will need to bring the following:
Copper and Brass 24g sheet metal- 3x3”- one each
4 or more 14g jump rings-5mm
1/16 eyelets – long
4 or more flat backed charms
pro polish pad or polishing cloth
Tools required: bench block, a bench block pad or small washcloth, household hammer (I
recommend the small stubby hammer that can be purchased from harbor freight), riveting
hammer or chasing hammer, rubber or latex gloves, 5 pieces of paper towel, a towel or cloth
placemat to work on and protect the table.
Optional tools:
Shears, metal file, metal hole punch, plastic mallet, wire cutters, letter and decorative stamps.
I would encourage you to bring your own tools as you wont have to wait for the limited class
tools