MATERIAL SAFETY DATA SHEET
Material: SCREEDMASTER RAPID REPAIR MORTAR
Code: LSMRRM
Date of Issue: July 2004
Version: 1
____________________________________________________________________________________________
1. Preparation and Company Identification:
Preparation trade name: SCREEDMASTER RAPID REPAIR MORTAR
Supplier:
LAYBOND PRODUCTS LTD,
Address:
Riverside, Saltney, Chester CH4 8RS, England
Telephone:
(+44) 01244 625000
Emergency:
As above
____________________________________________________________________________________________
2. Composition/Information on Ingredients:
CAS Number:
Chemical Name:
%:
Classification:
659971-15-1
CEMENT
5 - 10
Xi, R38, R41
65997-16-2
CEMENT
20-30
____________________________________________________________________________________________
3. Hazard Identification: Irritating to the eyes and skin (R36/38) . May cause irritation, dermatitis or burns in the
presence of moisture and body fluids.
____________________________________________________________________________________________
4. First Aid Measures:
Inhalation:
If irritation occurs, remove to fresh air. If irritation persists or airways become inflamed,
seek medical advice.
Skin Contact
Wash immediately with soap and water. If irritation or other skin trouble occurs, seek
medical advice.
Eye Contact:
Irrigate immediately with clean water for 15 minutes. If discomfort persists seek medical
advice.
Ingestion:
Do not induce vomiting. Wash mouth with water and drink copious amounts of water.
____________________________________________________________________________________________
5. Fire-Fighting Measures:
Suitable Extinguishing Media:
Non combustible
Unsuitable Extinguishing Media:
Special Exposure Hazards in Fires:
No special fire fighting procedure,
Required Special Protective
extinguishing media or explosion
Equipment for fire fighters:
hazard identified.
____________________________________________________________________________________________
6. Accidental Release Measures:
Precautions:
Contains spillages and keep dry if possible. Uncontaminated material can be recovered for re-use.
Minimise generation of airborne dust. Contaminated material should be disposed of at an approved
disposal site.
____________________________________________________________________________________________
7. Handling and Storage:
Handling:
Storage:
Avoid contact with skin and eyes. Avoid inhalation of dust. Wear appropriate protective clothing.
Should be stored under cover and protected from moisture. Store only two pallets high to avoid
compaction.
_________________________________________________________________________________________
8. Exposure Controls:
UK O E S 10mg/m3 Total Inhalable Dust, 4mg/m3 Respirable Dust. 8HR TWA
Respiratory Protection:
Use suitable respirator if exposure above O.E.S.
Hand Protection:
Wear suitable impervious type gloves
Skin Protection:
Long sleeved overalls, close fitting at openings.
Eye Protection:
Dust proof goggles if risk of powder entering eyes.
____________________________________________________________________________________________
9. Physical and Chemical Properties:
Appearance:
Grey Powder
Flammability:
N/A
Odour:
N/A
Autoflammability:
N/A
pH:
pH12/14 when wet
Explosive Properties:
N/A
Boiling point
N/A
Oxidising Properties:
N/A
/boiling point range: N/A
Vapour Pressure:
N/A
Melting point/
N/A
Relative Density:
Approx 1.3
melting point range: N/A
Solubility (water and fat)
N/A
Flashpoint (oC):
N/A
____________________________________________________________________________________________
10. Stability and Reactivity:
Hazardous decomposition products: None known
____________________________________________________________________________________________
11. Toxicological Information:
Powder is an eye irritant. Prolonged exposure of eyes can lead to burning and
ulceration. Prolonged exposure of skin can lead to dermatitis or burns. Swallowing large amounts of powder can
lead to irritation of the gastric intestinal tract. Inhalation of powder can lead to inflammation of the mucous
membranes.
____________________________________________________________________________________________
12. Ecological Information: Addition of powder to water will cause the pH to rise and become toxic to aquatic life.
Do not allow large quantities to reach ground water, rivers drainage or sewage systems.
____________________________________________________________________________________________
13. Disposal Considerations: Disposal of material should in accordance with local and national regulations at an
approved disposal site.
__________________________________________________________________________________________
14. Transport Information: Not classified as hazardous for conveyance.
___________________________________________________________________________________________
15. Regulatory Information:
EEC Symbol Xi Irritant
R36/38
Irritating to the eyes and skin
S24/25
Avoid contact with skin and eyes
S26
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39
Wear suitable protective clothing, gloves and eye/face protection
____________________________________________________________________________________________
16. Other Information:
Uses:
SMOOTHING COMPOUND
The data contained in this Safety Data Sheet has been supplied as required by the Chemical (Hazard Identification and
Packaging) Regulations 2002, as amended, for the purpose of protecting the health and safety of industrial and commercial
users who are deemed capable of understanding and acting on the information provided.
Please ensure that it is passed to the appropriate person(s) in your company, who are capable of acting on the
information.
This information is given in good faith, being based on the latest knowledge available to Laybond Products Ltd. No Known
relevant information has been omitted from this Material Safety Data Sheet and the information provided is designed to enable
the user to use the product safely. The user should not assume on the basis of the information provided in this sheet that the
product is suitable for any abnormal use.
If the information provided is insufficient to ensure safety in any particular application, contact Laybond Products Limited for
further advice before the proposed application is undertaken.
____________________________________________________________________________
Code:
LSMRRM
Date of Issue
July 2004
Supersedes: 1st Issue
____________________________________________________________________________