VIJAY SINGH

advertisement
VIJAY SINGH
Mobile: +91-9560882006 * E-Mail: victorydeo@gmail.com
Seeking responsible position in Electrical Engineering where my skills and abilities will be
utilized to enhance the productivity of the organization.
ORGANISATIONAL EXPERIENCE, +5 YEARS
1. Employer
Tenure
Designation
Scope of work
:
:
:
:
Bansal Wire Industries Limited, Loni Industrial Area- Gaziabad.
Since 15 July’13 to present.
Sr. Engineer (Electrical & Instrumentation).
Installation, Commissioning, Maintenance & trouble shooting of A.C.
variable frequency drives (VFD), PLC, HMI, Field instruments,
electrical switch &gears, HT (upto 33KV) & LT panels, cables and
DG sets (upto-1010 KVA).
2. Employer
Tenure
Designation
Scope of work
:
:
:
:
Viraj Profiles Limited, Tarapur-Mumbai, (Stainless steel manufacturer).
Since 2 July’10 to 10 July’13.
Engineer (Electrical & Instrumentation).
Installation, Commissioning, Maintenance & trouble shooting of A.C.
variable frequency drives (VFD), PLC, HMI and temperature
controllers.
Field instrumentation and control system of stainless steel wire drawing
machines and calibration of field instruments.
Specialized Area
:
JOB PROFILE
INSTALLATION, TESTING & COMMISSIONING







To carry out Installation, operation and commissioning of A.C. variable frequency drives (VFD).
To carry out In-house repairing and testing the A.C. variable frequency drives.
To carry out installation and commissioning of A.C. drives for different application modes after some
software and hardware modifications.
To carry out Installation and trouble shooting of PLC (Programmable logic controller).
To carry out Installation and trouble shooting of HMI (Human machine interface).
To carry out Installation, measurement and trouble shooting of temperature controllers with SCR (silicon
controlled rectifier) or thyristors.
To carry out Installation & maintenance of HT & LT Panels, Cables, DG Sets, Electrical Systems.
OPERATIONS & MAINTENANCE







Planning and implementation of Preventive Maintenance of machineries and instruments with standard
operating procedure (SOP) to increase machine running time and reduces breakdown.
To carry out yearly calibration planning for field instruments.
To carry out calibration of temperature indicators and controllers (TIC), thermo-couples (TC) and resistance
temperature detector (RTD) with making calibration reports and certificates.
Controlling automated electrical furnaces from its electrical functioning.
To carry out maintenance and troubleshooting of pneumatic instruments.
To carry out analysis and record of daily Power Consumption reports in each machines and electrical
furnaces.
To carry out daily work of materials reservation, notification, order generate, purchase & service requisitions,
service entry sheet in System Application & Product (SAP).





To maintain detailed technical records of each instruments and machines including control process
software’s, data, catalogs, technical manuals, history cards for machines.
To identify the root cause of electrical & instrumentation breakdowns and troubleshoot it in order to avoid
a re-occurrence of breakdowns.
Coordination with production department for attending urgent breakdowns.
Follow process improvement and quality improvement activities – TPM, 5S and ISO.
Trouble shooting critical electrical & instrumentation breakdowns in stainless steel wire drawing machines
i.e. - straight line m/c, inverted coiler m/c, MIG & TIG spooler m/c, wet- drawing m/c, ded block coiler,
gravity block, block to block, over to over, single head, electrical furnaces, take-up and etc.
PROJECTS EXECUTION




Carried out project of installation and commissioning of automation stainless steel wire drawing plant.
Implementation and maintained the Preventive Maintenance module including Breakdowns, Preventive
Maintenance and power consumption in System Application & Products (SAP) for Electrical &
Instrumentation department.
Carried out coast saving project in 25 cooling towers (10 HP motor per C.T).
Carried out heating element failure indication monitoring system for electrical heating furnaces.
NOTABLE ACHIEVEMENT



Prepared S.O.P. (Standard Operating Procedure) for Preventive Maintenance of each machines of
stainless steel wire drawing plant.
Run the fully automated MIG-Spooler wire drawing machine which was in permanent breakdown
from long time, due to that enhance the productivity of organization.
Successfully completed the project of installation and commissioning of automated stainless steel
wire drawing plant in Viraj Profiles Limited.
PROJECT EXECUTED
TITLE
COMPANY
TEAM
ROLE
KEY SKILLS
:
:
:
:
:
Automation Stainless Steel Wire Drawing Plant (Installation and Commissioning).
DETAILS
:
Installation and erection of 5 – 50 HP LS make A.C. Drives with master –K, PLC
and HMI With F-Net communication protocol, Braking resistors, DBU (Dynamic
Braking Units) units installed in heavy duty A.C. drives, Programmable
temperatures controllers with SCR (silicon controlled rectifier) in electrical
furnaces, open collector type encoder used to control the tension in S.S.wire,
solenoid valves with break coil for pneumatics brake, pressure gauge, thyristor or
SCR control, proximity sensors, level switches, limit switches for control and
measurements the whole process.
Viraj Profiles Limited.
22 members included 4 Korean engineers.
Engineer (Instrumentation & Control)
A.C. DRIVES, PLC, HMI, TEMPERATURE CONTROLLERS, VOLTAGE
CONTROLLER, SOLENOID VALVES, PROXIMITY SENSORS, ENCODERS,
LEVEL SWITCHES AND TYRISTOR CONTROLLER & SWITCH GEARS.
INDUSTRIAL TRAINING
Did Industrial training from IFFCO (Indian farmer’s fertilizers Co-operative Ltd.), Aonla unit (U.P) in the field
of Electrical & Instrumentation - Maintenance section of urea plant.
Where I’ have worked on these instruments: A.C. variable frequency drives.
 Temperature, Flow, Pressure and level measurement controlling devices.
SOFTWARE-SKILLS




Ms-office
SAP (System Applications & Product)
Programming languages
Operating system
:
:
:
:
2003 & 2007
GUI -710
Basic knowledge of ‘C’ and Mat lab 7.0
Windows 98/ XP/ Vista /2007
EDUCATIONAL DETAILS

2010
:


2005
2003
:
:
B.Tech.
in Electronics & Instrumentation Engg. from M.J.P.Rohilkhand
university, Uttar Pradesh Gov. Approved, secured 77.7 %
Intermediate (12th) from G.M.S.Roorkee, secured 61.4 %
Matriculate (10th) from K.V.Roorkee, secured 69.6 %
AREAS OF INTEREST



To control the open and closed loop system by use of LS or LG A.C. variable frequency drives with LS PLC
and HMI.
To calibration of field instruments.
To installation & commissioning of automation stainless steel wire drawing plants.
PERSONAL PROFILE
Name
Father’s Name
Date of Birth
Alternate E-mail
Permanent Address
:
:
:
:
:
Mr. Vijay Singh
Late Mr. Chatur Singh
28-05-1987
vijay06ei51@gmail.com
H.no.- 40C, Pocket-E
Dilshad Garden
Delhi-110095
REFERENCE
Mr. S.R.KESHAVE
Maintenance Manager (Electrical & Instrumentation)
Kalisma Steel Ltd.
Cell: +91-8698743221
E-mail: maintenance@kalismacorp.com
DECLARATION
I hereby declares that the above given information is correct to the best of my knowledge. If any of the given
information is found false/incorrect, my candidature is liable to be rejected.
Date:
Place:
_______________
(VIJAY SINGH)
Download