ICMEEM 2008 Poster - International Association of Engineers

advertisement
Call for Papers Reminder: The 2008 International Conference of Manufacturing
Engineering and Engineering Management (ICMEEM 2008)
CFP: The 2008 International Conference of Manufacturing Engineering and
Engineering Management (ICMEEM 2008)
From: IAENG - International Association of Engineers
Draft Paper Submission Deadline: 6 March, 2008
Camera-Ready papers & Pre-registration Due: 31 March, 2008
ICMEEM 2008: 2-4 July, 2008, London, U.K.
http://www.iaeng.org/WCE2008/ICMEEM2008.html
The conference ICMEEM'08 is held under the World Congress on Engineering 2008.
The WCE 2008 is organized by the International Association of Engineers (IAENG),
a non-profit international association for the engineers and the computer scientists.
Our congress committees have been formed with over two hundred and eighty
committee members who are mainly research center heads, faculty deans, department
heads, professors, and research scientists from different universities like Cambridge,
Imperial College, MIT and Oxford etc.
The conference proceedings will be published by IAENG (ISBN: 978-988-98671-9-5)
in hardcopy. The full-text congress proceeding will be indexed in major database
indexes so that it can be assessed easily. The Technology Research Databases (TRD)
of CSA (Cambridge Scientific Abstracts), DBLP and Computer Science
Bibliographies have promised to index the print proceeding in advance of its
publication. And after the publication of the proceeding, print copies will also be sent
to databases like IEE INSPEC, Engineering Index (EI) and ISI Thomson Scientific for
indexing. The accepted papers will also be considered for publication in the special
issues of the journal Engineering Letters. Some participants may also be invited to
submit extended version of their conference papers for considering as book chapters
(soon after the conference).
The topics include, but not limited to, the following:
Engineering Physiology
Biomedical Instrumentation
Engineering Statistics
Quality Management Systems
Maintenance Engineering
Reliability and Quality Control
Engineering Experimental Design
Integrated Product Engineering
Engineering Risk and Decision Analysis
Computer Supported Collaborative Engineering
Human Factors and Ergonomics
Computer-Aided Design
Computer Aided Manufacturing
Computer Simulation Methods
Facilities Design and Logistics
Manufacturing Processes and Methods
Information Systems for the Manufacturing
Quality and Productivity Management
Optimization Methods
Intelligent Engineering Systems
Engineering Management and Leadership
Management Science
Managerial economics
Systems thinking and analysis
Optimization
Integer programming
Linear programming
Nonlinear programming
Assignment problem
Transportation network design
Simulation
Statistical Analysis
Stochastics Modelling
Reliability and maintenance
Queueing theory
Game theory
Graph theory
OR algorithms and software developments
OR applications and case studies
=========
Submission:
WCE 2008 is now accepting manuscript submissions. Prospective authors are invited
to submit their draft paper in full paper (any appropriate style) to WCE{at}iaeng.org
by 6 March, 2008. The submitted file can be in MS Word format, PS format, or PDF
formats.
The first page of the draft paper should include:
(1) Title of the paper;
(2) Name, affiliation and e-mail address for each author;
(3) A maximum of 5 keywords of the paper.
Also, the name of the conference that the paper is being submitted to should be stated
in the email.
=============
Important Dates:
Draft Paper Submission Deadline: 6 March, 2008
Camera-Ready papers & Pre-registration Due: 30 March, 2008
WCE 2008: 2-4 July, 2008
It is our target that the reviewing process and the result notification for each submitted
manuscript can be completed within one month from its submission. The reviewing
process is to ensure the quality of the accepted papers in the WCE congress. The
conferences have enjoyed high reputation among many research colleagues ( for
example, see the http://cs.conference-ranking.net/ or http://www.conference-ranking.com/ or
http://www.conference-ranking.org/cs.html ).
=============
ICMEEM 2008 Conference Committee
Prof. Munir Ahmad
Professor, School of Science & Technology, University of Teesside, UK
Dr. Ioannis Angeli
Lecturer, Higher Technical Institute, Mechanical & Marine Engineering Department,
Nicosia, Cyprus
Prof. Paul M Braiden (FREng; ICMEEM honorary co-chair)
Emeritus Professor of Engineering,
School of Mechanical and Systems Engineering, Newcastle University, UK
Dr Peter Fenn
Senior Lecturer, School of Mechanical, Aerospace and Civil Engineering, University
of Manchester, UK
Dr Yee Mey Goh
Research Officer, Innovative Manufacturing Research Centre,
Department of Mechanical Engineering, University of Bath, UK
Dr. Ben James Hicks
Senior Research Fellow, Innovative Manufacturing Research Centre, Department of
Mechanical Engineering, University of Bath, UK
Professor Simon Hodgson (co-chair)
Assistant Dean and Professor of Functional & Advanced Materials,
School of Science and Technology, University of Teesside, UK
Professor Huosheng Hu
Department of Computer Science, University of Essex, U.K.
Dr. Winifred Ijomah
Research Scientist, Innovative Manufacturing Centre, Department of Mechanical
Engineering, University of Bath, UK
Dr. M. Latif
Senior Lecturer, Department of Engineering and Technology, Manchester
Metropolitan University, United Kingdom
Prof. Lin Li (FIEE; co-chair)
Professor, Chair of Laser Engineering, Director of Laser Processing Research Centre,
School of Mechanical, Aerospace and Civil Engineering, The University of
Manchester, UK
Dr. Ioannides Marinos
Lecturer, Computer Studies Department, Higher Technical Institute, Cyprus
Dr. Paul Mativenga
Lecturer, School of Mechanical, Aerospace and Civil Engineering, The University of
Manchester, UK
Dr Samir Mekid (co-chair)
Lecturer, School of Mechanical, Aerospace and Civil Engineering, The University of
Manchester, UK
Dr. Mori Nejad Vaezi-Nejad
Senior Lecturer in Communications Technology, Department of CCTM at North
Campus, London Metropolitan University, UK
Prof. S. Ayse Ozel
Department of Industrial Engineering, Engineering and Architecture Faculty, Uludag
University, Turkey
Prof. Miquel Angel Piera (co-chair)
Professor of the Universitat Autonoma de Barcelona (UAB), director of the McLeod
Institute for Simulation Sciences - Spanish Center, Spain
Dr Steve Plummer
Principal Lecturer, School of Engineering, University of Brighton, UK
Dr. H.S. Qi
School of Engineering, Design & Technology, University of Bradford, UK
Dr. Muhammad Imran Rafiq
Lecturer in Civil Engineering Structures, School of Engineering, University of Surrey,
UK
Professor Vinesh Raja (FIMechE, FRSA, FRSH)
Professorial Fellow and Head of Informatics, Warwick Manufacturing Group,
International Manufacturing Centre, University of Warwick, UK
Prof. Rajat Roy
Professorial Fellow, Warwick Manufacturing Group, University of Warwick, UK
Dr. Tim Short (co-chair)
Senior Lecturer in Engineering Design, Department of Engineering, University of
Liverpool, United Kingdom
Dr. Robert Trimble
Principal Lecturer in Engineering Operations Management, University of Sunderland,
School of Computing & Technology, United Kingdom
Dr. Qing Wang
Lecturer, School of Engineering, Durham University, United Kingdom
Dr. Philip Webb
Associate Professor, School Of Mechanical, Materials and Manufacturing
Engineering, The University of Nottingham, UK
Prof. David Wimpenny
Professor and Head of Rapid Prototyping, Faculty of Computing Sciences &
Engineering, The Innovation Centre, De Montfort University, UK
Dr. Roy Woodhead
Senior Lecturer, Technology Management, School of Technology, Oxford Brookes
University, UK
Dr. Nan Zhang
Lecturer, Centre for Process Integration,
School of Chemical Engineering and Analytical Science, University of Manchester,
UK
Dr Yuyang Zhao
Research Officer, Innovative Manufacturing Research Centre, Department of
Mechanical Engineering, University of Bath, UK
=============
WCE Congress Co-chairs
Prof. David WL Hukins, CPhys, FinstP, FIPEM, FRSE
Professor of Bio-medical Engineering
Head of Department of Mechanical & Manufacturing Engineering,
University of Birmingham, UK
Prof. Andrew Hunter
Professor & Head of Department
Head of Vision and AI Research Group,
Department of Computing and Informatics,
Lincoln University, UK
Prof. Alexander M. Korsunsky
Professor of Engineering Science
Dean, Trinity College
Department of Engineering Science, University of Oxford, UK
Prof. Leonid Gelman (honorary co-chair)
Professor and Chair in Vibro-Acoustic Monitoring,
Chairman of COMADIT, British Institute of NDT,
Director, Centre of Vibro-Acoustics and Fatigue,
Department of Process and Systems Engineering, School of Engineering
Cranfield University, UK
Dr. Christopher John Hogger (honorary co-chair)
Senior Lecturer
Department of Computing
Imperial College London, UK
Prof. Darek J. Ceglarek (ICMEEM honorary co-chair)
Professor, International Manufacturing Centre, University of Warwick, UK
Professor, Department of Industrial and Systems Engineering
The University of Wisconsin-Madison, USA
Fellow of CIRP; Associate Editor, IEEE Transactions on Automation
Science and Engineering, and ASME Transactions on Manufacturing Science
and Engineering
Dr. Stephen Payne (ICSBB honorary co-chair)
University Lecturer in BioMedical Engineering
Dean of Degrees Keble College, Head of Physiological Understanding
through Modelling, Monitoring and Analysis Group,
Department of Engineering Science, University of Oxford, UK
More details about the WCE 2008 can be found at:
http://www.iaeng.org/WCE2008/index.html
http://www.iaeng.net/WCE2008
http://www.iaeng.com/WCE2008
http://www.newswood.org/newswood_conferences.html
More details about the International Association of Engineers, and the IAENG
International Journal of Computer Science, and the IAENG International Journal of
Applied Mathematics can be found at:
http://www.iaeng.org/about_IAENG.html
http://www.iaeng.org/IJCS/index.html
http://www.iaeng.org/IJAM/index.html
The official journal web site of Engineering Letters at:
http://www.engineeringletters.com
Other Engineering Letters web sites at:
http://www.engineeringletters.com
http://www.engineeringletters.net
http://www.engineeringletters.org
http://www.engineeringletter.com
http://www.engineerletters.com
http://www.engineerletter.com
********
It will be highly appreciated if you can circulate these calls for papers to your
colleagues.
Download