DOC No
PD R0BT-004
PD IEC WT 01
DD 30 PART 2
DD 86 PART 2
DD 76 PART 2
DD 86 PART 1
DD 86 PART 3
DD 140 PART 1
DD 140 PART 2
DD 140 PART 2
DD 153
DD 194
DD 195 PART 1
DD 195 PART 2
DD ENV 197-1
PD 6657
Title
2002 EC Directives, Functional Safety and
the Role of CENELEC Standardization (G)
2001 IEC System for Conformity Testing and
Certification of Wind Turbines - Rules and
Procedures (Q)
1973 Resistance of Pharmaceutical Packages
to Opening by Children Part 2: NonReclosable Unit Packages
1984 Damp-Proof Courses Part 2: Method of
Test for Creep Deformation
1983 Precast Concrete Pipes of Composite
Construction Part 2: Precast Concrete Pipes
Strengthened by Chopped Zinc-Coated Steel
Fibres
1983 Damp-Proof Courses Part 1: Methods
of Test for Flexural Bond Strength and Short
Term Shear Strength
1990 Guide to Characteristic Strengths of
Damp-Proof Course Material Used in
Masonry
1986 Wall Ties Part 1: Methods of Test for
Mortar Joint and Timber Frame Connections
1987 Wall Ties Part 2: Recommendations for
Design of Wall Ties
1987 Amd 1 Wall Ties Part 2:
Recommendations for Design of Wall Ties
(AMD 7971) March 15, 1994 (R)
1990 S5/8 Serial Interface for the
Interconnection of Data Processing
Equipment
1990 Computer Integrated Manufacturing
(CIM): CIM Systems Architecture
Framework for Modelling
1991 Hydraulic Couplings Part 1: Method of
Test for Coupling Port Threads and Their
Seals Intended for Use in Fluid Power
Systems
1991 Hydraulic Couplings Part 2: Method of
Test for Couplings Intended for Use in Fluid
Power Systems
1995 Amd 1 Cement - Composition,
Specifications and Conformity Criteria Part
1: Common Cements (AMD 9138) October
1996 (R)
1999 PNO-ISC Information Document 011
PD 6658
PD 6659
PD 6660
PD 6663
PD 6664
PD 6672
PD 6673
PD 7002
PD 7002
PD 7305
PD 8888
PD 90021
PD 7003
Core INAP CS-1 Extensions for UK Use (S)
1999 PNO-ISC Information Document 013
Recommendations for Non-Circuit Related
Signalling to Support Service Provider
Access Interface (S)
2000 PNO-ISC Information Document
Number 004 Proprietary Extensions to C7
Interconnect User Part (IUP) (S)
2000 PNO-ISC Information Document
Number 008 Management of Partial Calling
Line Identity (S)
2000 Guidelines to BS EN 12973: Value
Management - Practical Guidance to Its Use
and Intent (G)
2000 PNO-ISC/SER/008 PNO-ISC Service
Description Number 008 Mobile Number
Portability (S)
2001 Guide to the Provision of Performance
Information for Domestic Upholstery Fabrics
Tested in Accordance with BS 2543:1995
2002 PNO-ISC Information Document 015
ISUP Overload Controls (S)
1996 Essential Requirements for Connection
of Terminal Equipment to 2-Wire Analogue
Interfaces, Without Capacitive Termination,
of Public Switched Telecommunication
Networks Using Either the Earth Calling, the
Loop Calling-Disconnect Clearing, the Loop
Ca
1995 Essential Requirements for Connection
of Terminal Equipment to Analogue
Interfaces of Public Switched
Telecommunication Networks Using Either
the Earth Calling, the Loop CallingDisconnect Clearing, the Loop CallingGuarded Clearing or the Loop Calli
1983 Exercises in Geometrical Tolerancing
for Students
2001 Technical Product Documentation
(TPD) - An Interim Report (G)
1994 BS 9000 - System of Quality
Assessment for Electronic Components (T)
1996 Essential Requirements for Terminal
Equipment Intended for Connection to
Analogue Interfaces of the PSTN Using
Direct Dialling in (S)
PAS 33
PAS 38
PAS 85
PD R009-004
PD R009-005
PD R044-001
PD R061-001
PD R072-001
PD R086-001
PD R217-015
PD 1002
PD R217-016
PD 6532-2
PD 6532 PART 2
PD 6532 PART 4
1999 Corr 1 Specification for the Design,
Installation and Commissioning of Gas Fired
Central Heating Systems in Domestic
Premises CORR 10848; March 2000; (R)
2000 Installation and Remote Monitoring of
Detector Activated CCTV Systems - Code of
Practice (S)
2000 A Quality Management System to
Ensure the Integrity and Traceability of
Primary Products in the Agri-food Chain (G)
2001 Railway Specifications - Systematic
Allocation of Safety Integrity Requirements
(Q)
2001 Railway Applications - Radio Remote
Control System of Traction Vehicle for
Freight Traffic in Multiple Traction
Operation (Q)
1999 Safety of Machinery - Guidance and
Recommendations for the Avoidance of
Hazards Due to Static Electricity (Q)
2000 Safety of Household and Similar
Electrical Appliances - Interpretations
Related to European Standards within the
Scope of CENELEC/TC 61 (L)
2001 List of Interpretations on the EN 60730
Series
2000 Guidance for Technology Audit of
Fibre Optic Connector Kits and Terminated
Connectors (S)
2000 Pinnacles Component Information
Standard 1.2 - PCIS Tutorial (S)
1997 A Guide to Cabling in Private
Telecommunications Systems (S)
2000 Pinnacles Component Information
Standard 1.2 - PCIS Sample Documents
Report R217-016: 1999; (S)
2000 Guide to the Contents of Certificates
and Labels of Reference Materials
Supersedes PD 6532-2:1992; ISO Guide
31:2000; (G)
1992 Reference Materials Part 2: Guide to
the Contents of Certificates of Reference
Materials (ISO Guide 31: 1981) (G)
1992 Reference Materials Part 4: Guide to
General and Statistical Principles for the
Certification of Reference Materials (ISO
PD 6532-5
PD 6533
PD 6534
PD 6537 PART 1
PD 6537 PART 2
PD 6550 PART 1
PD 6595
PD 6550 PART 2
BS ISO/IEC 18004
BS ISO/IEC 18009
BS ISO/IEC 20060
BS ISO 8009-6
BS ISO 8009-7
Guide 35: 1989) (G)
2000 General Requirements for the
Competence of Reference Material Producers
ISO Guide 34: 2000; (G)
1993 Methods for Assessing the Durability of
Geotextiles - an Interim Document (L)
1993 Guide to the use in the UK of DD ENV
206: 1992 Concrete. Performance,
Production, Placing and Compliance Criteria
(R)
1993 Variability of Methods of Test for
Textiles and Reports of Inter-Laboratory
Trials on Certain Methods Part 1: Phase 1:
BS 2576, BS 4303 and ISO 9290 (L)
1994 Variability of Methods of Test for
Textiles and Reports of Inter-Laboratory
Trials on Certain Methods Part 2: Phase 2:
BS 3320, BS 2010 and BS 1932 (L)
1989 Explanatory Supplement to BS 5500:
1988 'Specification for Unfired Fusion
Welded Pressure Vessels', Section Three
'Design' Part 1: Domed Ends (Heads)
1996 Parameter Extraction Techniques for
the European Mini Test Chip (S)
1989 Explanatory Supplement to BS 5500:
1988 'Specification for Unfired Fusion
Welded Pressure Vessels', Section Three
'Design' Part 2: Openings and Branch
Connections
2000 Information Technology - Automatic
Identification and Data Capture Techniques Bar Code Symbology - QR Code (S)
1999 Information Technology Programming Languages - Ada: Conformity
Assessment of a Language Processor (S)
2001 Information Technology - Open
Terminal Architecture (OTA) Specification Virtual Machine Specification (S)
1985 Reusable Rubber Contraceptive
Diaphragms Part 6: Determination of
Deterioration After Accelerated Ageing
Together with BS ISO 8009: Parts 1 to 5, and
Parts 7 to 10, it Supersedes BS 4028: 1989;
(N)
1985 Reusable Rubber Contraceptive
Diaphragms Part 7: Determination of
BS ISO 8009-8
BS ISO 8009-9
BS ISO 8038-2
BS ISO 8040
BS ISO 11807-1
BS ISO 8009-10
BS EN 61300-3-10
BS ISO 11807-2
BS ISO 11819-1
BS ISO 11822
BS ISO 12233
BS ISO 11922-1
Compression Resistance of Coil Spring and
Flat Spring Diaphragms Together with BS
ISO 8009: Parts 1 to 6, and Parts 8 to 10, it
Supersedes BS 4028: 1989; (N)
1985 Reusable Rubber Contraceptive
Diaphragms Part 8: Determination of
Twisting During Compression of Coil Spring
and Flat Spring Diaphragms Together with
BS ISO 8009: Parts 1 to 7, and Parts 9 to 10,
it Supersedes BS 4028: 1989; (N)
1985 Reusable Rubber Contraceptive
Diaphragms Part 9: Packaging and Labelling
Together with BS ISO 8009: Parts 1 to 8, and
Part 10, it Supersedes BS 4028: 1989; (N)
2001 Optics and Optical Instruments - Screw
Threads for Microscope Objectives and
Related Nosepieces - Part 2: Screw Thread
Type M25 x 0,75 mm (N)
2001 Optics and Optical Instruments Microscopes - Dimensions of Tube Slide and
Tube Slot Connections Supersedes BS 70125:1988; (H)
2001 Integrated Optics - Vocabulary - Part 1:
Basic Terms and Symbols (G)
1985 Reusable Rubber Contraceptive
Diaphragms Part 10: Recommendations for
Storage Together with BS ISO 8009: Parts 1
to 9, it Supersedes BS 4028: 1989; (N)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 3.10:
Examinations and Measurements - Gauge
Retention Force IEC 61300-3-10: 1995; (S)
2001 Integrated Optics - Vocabulary - Part 2:
Terms Used in Classification (G)
1997 Acoustics - Measurement of the
Influence of Road Surfaces on Traffic Noise Part 1: Statistical Pass-By Method (F)
1996 Information and Documentation Extension of the Arabic Alphabet Coded
Character Set for Bibliographic Information
Interchange (S)
2000 Photography - Electronic Still Picture
Cameras - Resolution Measurements (H)
1997 Thermoplastics Pipes for the
Conveyance of Fluids - Dimensions and
BS ISO 11922-2
BS ISO 11928-1
BS ISO 11928-2
BS ISO 14880-1
BS ISO 11928-2
BS ISO/IEC 10026-3
BS ISO/IEC 10026-4
BS ISO/IEC 10026-5
BS ISO/IEC 10026-6
BS ISO/IEC 10027
BS ISO/IEC TR 10000-2
Tolerances Part 1: Metric Series Together
with BS 2782: Part 11: Method 1121B and
BS ISO 4065, This Document Partially
Supersedes BS 5556: 1978; (E)
1997 Thermoplastics Pipes for the
Conveyance of Fluids - Dimensions and
Tolerances Part 2: Inch-Based Series
Together with BS 2782: Part 11: Method
1121C and BS ISO 4065, This Document
Partially Supersedes BS 3867: 1987; (E)
2000 Micrographics - Quality Control of
Graphic COM Recorders - Part 1:
Characteristics of the Test Frames
Supersedes BS 7353: 1991; (H)
2000 Micrographics - Quality Control of
Graphic COM Recorders - Part 2: Quality
Criteria and Control Supersedes BS 7353:
1991; (H)
Microlens Array - Part 1: Vocabulary (H)
2000 Corr 1 Micrographics - Quality Control
of Graphic COM Recorders - Part 2: Quality
Criteria and Control CORR 13164:October
31,2001; Supersedes BS 7353:1991; (H)
1998 Information Technology - Open
Systems Interconnection - Distributed
Transaction Processing - Part 3: Protocol
Specification (S)
1995 Information Technology - Open
Systems Interconnection - Distributed
Transaction Processing: Protocol
Implementation Conformance Statement
(PICS) Proforma (S)
1998 Information Technology - Open
Systems Interconnection - Distributed
Transaction Processsing - Part 5: Application
Context Proforma and Guidelines When
Using OSI TP (S)
1995 Information Technology - Open
Systems Interconnection - Distributed
Transaction Processsing Part 6: Unstructured
Data Transfer (S)
(OBSOLESCENT) 1990 Information
Technology - Information Resource
Dictionary System (IRDS) Framework
Replaces DD 124: 1985
1990 Information Technology - Framework
BS ISO 11841-1
BS ISO/IEC TR 10000-3
BS ISO/IEC 10021-1
BS ISO/IEC 10021-1
BS ISO/IEC 10021-1
BS ISO/IEC 10021-1
BS ISO/IEC 10021-1
BS ISO/IEC 10021-1
BS ISO/IEC 10021-1
BS ISO 11841-2
and Taxonomy of International Standardized
Profiles Tr 10000-2: Taxonomy of Profiles
2000 Road Vehicles and Internal Combustion
Engines - Filter Vocabulary - Part 1:
Definitions of Filters and Filter Components
(G)
1995 Information Technology - Framework
and Taxonomy of International Standardized
Profiles Part 3: Principles and Taxonomy for
Open System Environment Profiles (S)
1990 Amd 1 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 1:
System and Service Overview (AMD 6846)
September 30, 1991
1990 Amd 2 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 1:
System and Service Overview (AMD 7139)
July 15, 1992 (S)
1990 Amd 3 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 1:
System and Service Overview (AMD 7271)
August 15, 1992 (Technical Corr 3) (S)
1990 Amd 4 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 1:
System and Service Overview (AMD 7540)
December 15, 1992 (Technical Corr 4) (S)
1990 Amd 5 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 1:
System and Service Overview (AMD 7682)
March 15, 1993 (Technical Corr 5) (S)
1990 Amd 6 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 1:
System and Service Overview (AMD 8390)
January 15, 1995 (Technical Corr 6) (S)
1990 Amd 7 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 1:
System and Service Overview (AMD 8583)
August 15, 1995 (Technical Corr 7) (S)
2000 Road Vehicles and Internal Combustion
BS ISO 11843-1
BS ISO 11843-2
BS ISO 11846
BS ISO 11859
BS ISO 11866-1
BS ISO 11866-2
BS ISO 11870
BS ISO 11907-2
BS ISO 12197
DD 203 PART 1
BS ISO 11866-3
PD ISO/TR 14672
Engines - Filter Vocabulary - Part 1:
Defifitions of Characteristics of Filters and
Their Components (G)
1997 Corr 1 Capability of Detection - Part 1:
Terms and Conditions Corr 11011 July 2000
(G)
2000 Capability of Detection - Part 2:
Methodology in the Linear Calibration Case
Should Be Read in Conjunction with BS ISO
11843-1: 2000; (G)
1995 Corrosion of Metals and Alloys Determination of Resistance to Intergranular
Corrosion of Solution Heat- Treatable
Aluminium Alloys (V)
1999 Textile Floor Coverings - Pure Wool,
Hand-Knotted Pile Carpets - Specification
(L)
1997 Milk and Milk Products - Enumeration
of Presumptive Escherichia Coli Part 1: Most
Probable Number Technique Supersedes BS
4285: Section 3.8: 1988; (W)
1997 Milk and Milk Products - Enumeration
of Presumptive Escherichia Coli Part 2: Most
Probable Number Technique Using 4Methylumbelliferyl-B-D-Glucuronide
(MUG) Supersedes BS 4285: Section 3.8:
1988; (W)
2000 Milk and Milk Products Determination of Fat Content - General
Guidance on the Use of Butyrometric
Methods (W)
1995 Plastics - Smoke Generation Determination of the Corrosivity of Fire
Effluents Part 2: Static Method (V)
1996 Woodruff Keyseat Cutters Dimensions (H)
1991 Industrial Automation: Shop Floor
Production Part 1: Reference Model for
Standardization and a Methodology for
Identification of Requirements
1997 Milk and Milk Products - Enumeration
of Presumptive Escherichia Coli Part 3:
Colony-Count Technique at 44 Degrees C
Using Membranes Supersedes BS 4285:
Section 3.8: 1988; (W)
2001 Graphic Technology - Statistics of the
PD ISO/TR 15489-2
PD ISO/TR 15969
PD ISO/TS 16949
PD ISO/TR 17663
PD CR ISO 17663
PD ISO/TR 18930
PD ISO/TR 19033
PD ES 59008-3
PD ES 59008-4-1
PD IEC TS 62033
PD ES 59008-4-2
PD ES 59008-4-3
L 164
L 165
Natural SCID Images Defined in ISO 12640
(S)
2001 Information and Documentation Records Management - Part 2: Guidelines
(G)
2001 Surface Chemical Analysis - Depth
Profiling - Measurement of Sputtered Depth
(W)
1999 Quality Systems - Automotive
Suppliers - Particular Requirements for the
Application of ISO 9001: 1994 ISO/TS
16949: 1999; (G)
2001 Welding - Guidelines for Quality
Requirements for Heat Treatment in
Connection with Welding and Allied
Processes (F)
2001 Corr 1 Welding - Guidelines for Quality
Requirements for Heat Treatment in
Connection with Welding and Allied
Processes CORR 13322:September 2001; (F)
2001 Imaging Materials - Protocols for
Outdoor Weathering Experiments (H)
2000 Technical Product Documentation Metadata for Construction Documentation
ISO/TR 19033:2000; (G)
1999 Data Requirements for Semiconductor
Die - Part 3: Mechanical, Material and
Connectivity Requirements (S)
2001 Data Requirements for Semiconductor
Die - Part 4-1: Specific Requirements and
Recommendations - Test and Quality (S)
2000 Attenuation Uniformity in Optical
Fibres IEC TS 62033: 2000; (S)
2001 Data Requirements for Semiconductor
Die - Part 4-2: Specific Requirements and
Recommendations - Handling and Storage
(S)
2000 Data Requirements for Semiconductor
Die - Part 4-3: Specific Requirements and
Recommendations - Thermal (S)
1978 Sheet and Strip of Aluminium-Coated
Aluminium- Copper- Magnesium-SiliconManganese Alloy (Cu 4.4, Mg 0.5, Si 0.8,
Mn 0.8) (Replaces BS L 151: 1975 and BS L
153: 1975)
1978 Amd 1 Specification for Sheet and Strip
L 166
L 167
L 168
L 169
PD IEC TR 61131-8
L 168
L 170
PD IEC TR 61010-3-043
of Aluminium- Coated Aluminium-CopperMagnesium-Silicon- Manganese Alloy
(Solution Treated and Artificially Aged) (Cu
4.4, Mg 0.5, Si 0.8, Mn 0.8) (AMD 6391)
July 31, 1991 (Replaces BS L 152: 1975)
1978 Close Toleranced Sheet and Strip of
Aluminium- Coated Aluminium-CopperMagnesium-Silicon- Manganese Alloy (Cu
4.4, Mg 0.5, Si 0.8, Mn 0.8) (Replaces BS 2L
89: 1971 and BS L 108: 1971)
1978 Amd 1 Specification for Close
Toleranced Sheet and Strip of AluminiumCoated Aluminium-Copper- MagnesiumSilicon- Manganese Alloy (Solution Treated
and Art. Aged) (Cu 4.4, Mg 0.5, Si 0.8,Mn
0.8) (AMD 6392) July 31, 1991 (Replaces
BS 2L 90:1971)
1978 Bars and Extruded Sections of
Aluminium- Copper-Magnesium- SiliconManganese Alloy (Cu 4.4, Mg 0.5, Si 0.8,
Mn 0.8) (Replaces BS 3L 65: 1971)
1986 Amd 1 Ingots and Castings of
Aluminium-Silicon- Magnesium Alloy
(Solution Treated and Artificially Aged) (Si
7, Mg 0.6) (AMD 6547) December 21, 1990
2000 Programmable Controllers - Part 8:
Guidelines for the Application and
Implementation of Programming Languages
IEC TR 61131-8: 2000; (S)
1978 Amd 1 Bars and Extruded Sections of
Aluminium- Copper-Magnesium- SiliconManganese Alloy (Solution Treated and
Artificially Aged) (Not Exceeding 200 mm
Diameter or Minor Sectional Dimension) (Cu
4.4, Mg 0.5, Si 0.7, Mn 0.8) (AMD 7876) 815-93 (Replac
1989 Extruded Bars and Sections of
Aluminium-Zinc-Copper-Chromium Alloy
(Solution Treated, Controlled Stretched and
Artificially Aged) (Not Excluding 150 mm
Diameter or Minor Sectional Dimensions)
(Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.23) (7075)
2002 Safety Requirements for Electrical
Equipment for Measurement, Control, and
Laboratory Use - Part 3-043: Conformity
Verification Report for IEC 61010-2-
PD IEC TR 61282-1
PD IEC 61340-2-2
G 190
G 193
PD IEC TR 61354
PD IEC 61394
DD ENV 1991-2-3
DD ENV 1991-2-4
DD ENV 1991-2-4
BS ISO/IEC ISP 10613-6
BS ISO/IEC ISP 10613-7
BS ISO/IEC ISP 10613-8
043:1997 - Particular Requirements for Dry
Heat Sterilizers Using Either Hot Air or Hot
Inert Gas f
2000 Fibre Optic Communication System
Design Guides - Part 1: Single-Mode Digital
and Analogue Systems (S)
2000 Electrostatics - Part 2-2: Measurement
Methods - Measurement of Chargeability
IEC TR 61340-2-2: 2000; (F)
1964 Cabin Altimeters for Aircraft
1966 Aircraft Lampholders
1995 Electricity Meters - Marking of
Auxiliary Terminals for Tariff Devices IEC
TR 61354:1995; (R)
1997 Overhead Lines - Characteristics of
Greases for Aluminium, Aluminium Alloy
and Steel Bare Conductors (Q)
1996 Eurocode 1: Basis of Design and
Actions on Structures Part 2.3: Actions on
Structures - Snow Loads (R)
1997 Eurocode 1: Basis of Design and
Actions on Structures Part 2.4: Actions on
Structures - Wind Actions (Together with
United Kingdom National Application
Document) (R)
1997 Amd 1 Eurocode 1: Basis of Design
and Actions on Structures Part 2.4: Actions
on Structures - Wind Actions (Together with
United Kingdom National Application
Document) AMD 10671; May 2000; (R)
1995 Amd 1 Information Technology International Standardized Profile RA Relaying the Connectionless-Mode Network
Service Part 6: Definition of Profile
RA51.54, Relaying the Connectionless-Mode
Network Service Between CSMA/CD LAN
Subnetworks and FDDI L
1994 Information Technology - International
Standardized Profile RA - Relaying the
Connectionless-Mode Network Service - Part
7: PSDN Subnetwork- Dependent, MediaDependent Requirements for Virtual Calls
over a Permanent Access (S)
1994 Information Technology - International
Standardized Profile RA - Relaying the
Connectionless-Mode Network Service - Part
BS ISO/IEC ISP 10615-3
BS ISO/IEC ISP 10613-7
BS ISO/IEC ISP 10615-4
BS ISO/IEC ISP 10613-8
BS ISO/IEC ISP 10613-9
BS ISO/IEC ISP 10616
BS ISO/IEC 10641
BS ISO/IEC 10728
BS ISO/IEC 10729-1
8: Definition of Profile RA51.1111, Relaying
the Connectionless-Mode Network Service
Between CSMA/CD LAN Subnetworks and
PSDNs Us
1996 Information Technology - International
Standardized Profiles ADInn - OSI Directory
Part 3: ADI21 - DSA Performer Role (S)
1994 Amd 1 Information Technology International Standardized Profile RA Relaying the Connectionless-Mode Network
Service - Part 7: PSDN SubnetworkDependent, Media-Dependent Requirements
for Virtual Calls over a Permanent Access
AMD 9575; September 19
1996 Information Technology - International
Standardized Profiles ADInn - OSI Directory
Part 4: ADI22 - DSA Invoker Role (S)
1994 Amd 1 Information Technology International Standardized Profile RA Relaying the Connectionless-Mode Network
Service - Part 8: Definition of Profile
RA51.1111, Relaying the ConnectionlessMode Network Service between CSMA/CD
LAN Subnetworks and PS
1994 Information Technology - International
Standardized Profile RA - Relaying the
Connectionless-Mode Network Service - Part
9: Definition of Profile RA51.1121, Relaying
the Connectionless-Mode Network Service
between CSMA/CD LAN Subnetworks and
PSDNs Us
1995 Information Technology - International
Standardized Profiles FDI11 - Directory Data
Definitions - Common Directory Use
(Normal) (S)
1993 Information Technology - Computer
Graphics and Image Processing Conformance Testing of Implementations of
Graphics Standards (S)
1993 Information Technology - Information
Resource Dictionary System (IRDS) Services
Interface (S)
1993 Information Technology - Open
Systems Interconnection - Conformance Test
Suite for the Presentation Layer - Part 1: Test
Suite Structure and Test Purposes for the
BS ISO/IEC 10729-2
BS ISO/IEC TR 10730
BS ISO/IEC 10731
BS ISO/IEC 8482
BS ISO/IEC 8571-5
BS ISO/IEC 8632-3
BS ISO/IEC 8632-4
BS ISO/IEC 8651-4
BS ISO/IEC 8652
BS ISO/IEC 8822
BS ISO/IEC 8822
Presentation Protocol (S)
1995 Information Technology - Open
Systems Interconnection - Conformance Test
Suite for the Presentation Layer Part 2: Test
Suite Structure and Test Purposes for the
ASN.1 Basic Encodings (S)
1993 Information Technology - Open
Systems Interconnection - Tutorial on
Naming and Addressing (S)
1994 Information Technology - Open
Systems - Interconnection - Basic Reference
Model - Conventions for the Definition of
OSI Services (Replaces DD 108: 1988) (S)
1993 Information Technology Telecommunications and Information
Exchange Between Systems - Twisted Pair
Multipoint Interconnections (Replaces BS
7248: 1990) (S)
1990 Information Processing Systems - Open
Systems Interconnection - File Transfer,
Access and Management - Part 5: Protocol
Implementation Conformance Statement
Proforma
1999 Information Technology - Computer
Graphics - Metafile for the Storage and
Transfer of Picture Description Information Part 3: Binary Encoding Supersedes BS EN
28632-3:1994; (S)
1999 Information Technology - Computer
Graphics - Metafile for the Storage and
Transfer of Picture Description Information Part 4: Clear Text Encoding Supersedes BS
EN 28632:1994; (S)
1995 Information Technology - Computer
Graphics - Graphical Kernel System (GKS)
Language Bindings - Part 4: C (S)
1995 Corr 1 Information Technology Programming Languages - Ada Corr 13552;
October 31, 2001
1994 Information Technology - Open
Systems Interconnection - Presentation
Service Definition (Replaces BS 7093: 1989)
(S)
1994 Amd 1 Information Technology - Open
Systems Interconnection - Presentation
Service Definition AMD 10492; July 1999;
BS ISO/IEC 8650-2
BS ISO/IEC 8802-2
BS ISO/IEC 8802-2
BS ISO/IEC 8802-3
BS ISO/IEC 8806-4
BS ISO/IEC 8823-2
BS ISO/IEC 8859-2
BS ISO/IEC 8859-3
BS ISO/IEC 8859-4
(S)
1997 Information Technology - Open
Systems Interconnection - Protocol
Specification for the Association Control
Service Element: Protocol Implementation
Conformance Statement (PICS) Proforma
Supersedes BS ISO/IEC 8650-2: 1995; (S)
1994 Information Technology Telecommunications and Information
Exchange Between Systems - Local and
Metropolitan Area Networks - Specific
Requirements Part 2: Logical Link Control
(Replaces BS ISO 8802-2: 1989) (S)
1994 Amd 3 Information Technology Telecommunications and Information
Exchange Between Systems - Local and
Metropolitan Area Networks - Specific
Requirements Part 2: Logical Link Control
(AMD 8951) December 15, 1995 (Replaces
BS ISO 8802-2: 1989) (S)
1992 Information Technology - Local and
Metropolitan Area Networks - Part 3: Carrier
Sense Multiple Access with Collision
Detection (CSMA/CD) Access Method and
Physical Layer Specifications
1991 Information Technology - Computer
Graphics - Graphical Kernel System for
Three Dimensions (GKS-3D) Language
Bindings - Part 4: C Supersedes BS EN
28806-4:1993; (S)
1997 Information Technology - Open
Systems Interconnection - ConnectionOriented Presentation Protocol: Protocol
Implementation Conformance Statement
(PICS) Proforma Supersedes BS ISO/IEC
8823-2: 1995; (S)
1999 Information Technology - 8-Bit SingleByte Coded Graphic Character Sets - Part 2:
Latin Alphabet No.2 Supersedes BS 7203-2:
1989; (S)
1999 Information Technology - 8-Bit SingleByte Coded Graphic Character Sets - Part 3:
Latin Alphabet No.3 (S)
1998 Information Technology - 8-Bit SingleByte Coded Graphic Character Sets - Part 4:
Latin Alphabet No. 4 (S)
BS ISO/IEC 8859-5
BS ISO/IEC 8859-6
BS ISO/IEC 8859-8
DD 203 PART 2
DD 205
DD 238 PART 1
DD 219 PART 1
DD 228
DD 228
DD 230
DD 232
DD 237
DD 238 PART 2
DD 238 PART 3
DD 238 PART 5
DD 238 SEC 7.1
1999 Information Technology - 8-Bit SingleByte Coded Graphic Character Sets - Part 5:
Latin/Cyrillic Alphabet (S)
1999 Information Technology - 8-Bit SingleByte Coded Graphic Character Sets - Part 6:
Latin/Arabic Alphabet (S)
1999 Information Technology - 8-Bit SingleByte Coded Graphic Character Sets - Part 8:
Latin/Hebrew Alphabet (S)
1991 Industrial Automation: Shop Floor
Production Part 2: Application of the
Reference Model for Standardization and
Methodology (G) (ISO/TR 10314-2: 1991)
1991 Performance of Damp- Proof Courses
Installed to Prevent Rising Damp
1996 Fieldbus Part 1: Guide to System
Architecture (S)
1995 Electronic Funds Transfer at Point of
Sale (EFT-POS) Conceptual Framework Part
1: Guide to Roles, Entities and Relationships
(S)
1996 Methods of Determination of Maximum
Density for Bituminous Mixtures (W)
1996 Amd 1 Methods for Determination of
Maximum Density of Bituminous Mixtures
(AMD 9259) October 15, 1996 (V)
1996 Method for Determination of in Situ
Crushing Resistance of Floating Levelling
Screeds (R)
1996 Method for Determination of the
Maximum Binder Content of Bituminous
Mixtures without Excessive Binder Drainage
(R)
1996 Building Construction Machinery and
Equipment - Classification (ISO/TR 12603:
1996) (R)
1996 Fieldbus Part 2: Specification for 31.25
kbit/s Physical Layer Profile (S)
1996 Fieldbus Part 3: Specification for Data
Link Services Subset (S)
1996 Fieldbus Part 5: Specification for
Fieldbus Access Sublayer (Services and
Protocol) (S)
1996 Fieldbus Part 7: Fieldbus Management
Section 7.1: Specification for System
Management (S)
DD 238 SEC 7.2
DD 240 PART 1
DD 240 PART 2
DD 241 PART 4
DD 241 PART 5
DD 241 PART 6
DD 241 PART 7
DD 241 PART 8
DD 242
DD 244
DD 246
DD 249
DD 250
DD 251
DD 253
DD 254
DD ISO 709
DD ENV 500-6
DD ENV 581-2
1996 Fieldbus Part 7: Fieldbus Management
Section 7.2: Specification for Network
Management (S)
1997 Fire Safety Engineering in Buildings
Part 1: Guide to the Application of Fire
Safety Engineering Principles (G)
1997 Fire Safety Engineering in Buildings
Part 2: Commentary on the Equations Given
in Part 1 (G)
1997 ControlNet Part 4: Network and
Transport Layer (S)
1997 ControlNet Part 5: Data Management
(S)
1997 ControlNet Part 6: Object Model (S)
1997 ControlNet Part 7: Device Profiles (S)
1997 ControlNet Part 8: Electronic Data
Sheet (S)
1998 Code of Practice for Intruder Alarm
Systems for High Security Areas (L)
1998 Code of Practice for Wire-Free
Interconnections within Intruder Alarms (L)
1999 Recommendations for the Use of the
Cone Calorimeter (G)
1999 Testing Aggregates - Method for the
Assessment of Alkali-Silica Reactivity Potential Accelerated Mortar-Bar Method (R)
1999 Road Materials - Test Method for the
Analysis of Bituminous Mixtures by Ignition
(R)
2000 Sprinkler Systems for Residential and
Domestic Occupancies - Code of Practice (R)
2001 Mouthgauards for Use in Sport and
Recreation - Requirements and Test Methods
(L)
2001 Crime Reduction Measures for Holiday
Resorts and Accommodation - Guidance and
Recommendations (G)
1980 Essential Oils - Determination of Ester
Value (W)
1996 Mobile Road Construction Machinery Safety Part 6: Specific Requirements for
Paver- Finishers (R)
2000 Outdoor Furniture - Seating and Tables
for Camping, Domestic and Contract Use Part 2: Mechanical Safety Requirements and
Test Methods for Seating (L)
DD ENV 583-6
DD ENV 12538
DD ENV 12610
DD ENV 13233
DD ENV 658-3
DD ENV 725- 2
DD ENV 725- 4
DD ENV 725- 11
DD ENV 13321-2
DD ENV 820-4
DD ENV 927-2
DD ENV 1090-6
DD ENV 1186-4
DD ENV 1186-8
2000 Non-Destructive Testing - Ultrasonic
Examination - Part 6: Time-Of-Flight
Diffraction Technique as Method for
Detection and Sizing of Discontinuities
Related Standard BS 7706: 1993; (F)
1998 Medical Informatics - Messages for
Patient Referral and Discharge (S)
1998 Medical Informatics - Medicinal
Product Identification (S)
2000 Advanced Technical Ceramics Ceramic Composites - Notations and
Symbols (G)
1993 Advanced Technical Ceramics Mechanical Properties of Ceramic
Composites at Room Temperature Part 3:
Determination of Flexural Strength (V)
1994 Advanced Technical Ceramics Methods of Test for Ceramic Powders Part 2:
Determination of Impurities in Barium
Titanate (V)
1994 Advanced Technical Ceramics Methods of Test for Ceramic Powders Part 4:
Determination of Oxygen Content in
Aluminium Nitride by XRF Analysis (V)
1994 Advanced Technical Ceramics Methods of Test for Ceramic Powders Part
11: Determination of the Densification on
Natural Sintering (V)
2000 Data Communication for HVAC
Application Automation Net - Part 2: EIBnet
(S)
2002 Advanced Technical Ceramics Monolithic Ceramics - Thermomechanical
Properties - Part 4: Determination of Flexural
Creep Deformation at Elevated Temperatures
(V)
2000 Paints and Varnishes - Coating
Materials and Coating Systems for Exterior
Wood - Part 2: Performance Specification
(W)
2001 Execution of Steel Structures - Part 6:
Supplementary Rules for Stainless Steel (R)
1994 Materials and Articles in Contact with
Foodstuffs - Plastics Part 4: Test Methods for
Overall Migration into Olive Oil by Cell (V)
1994 Materials and Articles in Contact with
DD ENV 1363-3
DD ENV 12169
DD ENV 1259-3
DD ENV 1329-2
DD ENV 1401-2
DD ENV 1401-3
DD ENV 1402-1
DD ENV 1402-4
DD ENV 1402-5
DD ENV 1402-8
DD ENV 1402-8
DD ENV 1452-6
Foodstuffs - Plastics Part 8: Test Methods for
Overall Migration into Olive Oil by Article
Filling (V)
2000 Fire Resistance Tests - Part 3:
Verification of Furnace Performance (R)
(Draft)2000 Criteria for the Assessment of
Conformity of a Lot of Sawn Timber (V)
1997 Amd 1 Single Burner Gas Fired
Overhead Radiant Tube Heaters and NonDomestic Gas-Fired Overhead Luminous
Radiant Heaters Part 3: Requirements and
Test Methods for Establishing the Rational
Use of Energy - Radiometric Method C
AMD 9898; January 15, 19
2001 Plastic Piping Systems for Soil and
Waste Discharge (Low and High
Temperature) within the Building Structure Unplasticized Poly(Vinyl Chloride) (PVC-U)
- Part 2: Guidance for the Assessment of
Conformity (R)
2001 Plastics Piping Systems for NonPressure Underground Drainage and
Sewerage - Unplasticized Poly(Vinyl
Chloride) (PVC-U) - Part 2: Guidance for
Assessment of Conformity (R)
2001 Plastics Piping Systems for NonPressure Underground Drainage and
Sewerage - Unplasticized Poly(Vinyl
Chloride) (PVC-U) - Part 3: Guidance for
Installation (R)
1995 Unshaped Refractory Products Part 1:
Introduction and Definitions (F)
2000 Unshaped Refractory Products - Part 4:
Determination of Cosistency of Castables (F)
2000 Unshaped Refractory Products - Part 5:
Preparation and Treatment of Test Pieces (F)
1999 Unshaped Refractory Products - Part 8:
Determination of Complementary Properties
(F)
1999 Corr.1 Unshaped Refractory Products Part 8: Determination of Complementary
Properties CORR 10706; September 1999;
(F)
2002 Plastics Piping Systems for Water
Supply - Unplasticized Poly(Vinyl Chloride)
(PVC-U) - Part 6: Guidance for Installation
DD ENV 1452-7
DD ENV 1451-2
DD ENV 1453-2
DD ENV 1455-2
DD ENV 1519-2
DD ENV 1565-2
PD 6460
PD 6461 PART 1
PD 6461 PART 1
PD 6461 PART 2
PD 6461 PART 3
(E)
2001 Plastic Piping Systems for Water
Supply - Unplasticized Poly (Vinyl Chloride)
(PVC-U) - Part 7: Guidance for the
Assessment of Conformity (E)
2001 Plastics Piping Systems for Soil and
Waste Discharge (Low and High
Temperature) within the Building Structure Polypropylene (PP) - Part 2: Guidance for the
Assessment of Conformity (R)
2001 Plastics Piping Systems with Structured
Wall Pipes for Soil and Waste Discharge
(Low and High Temperature) Inside
Buildings - Unplasticized Poly(Vinyl
Chloride) (PVC-U) - Part 2: Guidance for the
Assessment of Conformity (R)
2001 Plastics Piping Systems for Soil and
Waste Discharge (Low and High
Temperature) within the Building Structure Acrylonitrile-Butadiene-Styrene (ABS) - Part
2: Guidance for the Assessment of
Conformity (R)
2001 Plastics Piping Systems for Soil and
Waste Discharge (Low and High
Temperature) within the Building Sturcture Polyethylene (PE) - Part 2: Guidance for the
Assessment of Conformity (R)
2001 Plastics Piping Systems for Soil and
Waste Discharge (Low and High
Temperature) within the Building Structure Styrene Copolymer Blends (SAN & PVC) Part 2: Guidance for the Assessment of
Conformity (R)
1971 Amd 2 Collected Amendments to the
CV 7000 Specifications for Semiconductors
Adopted as British Standards (9300 Series)
1995 Vocabulary of Metrology Part 1: Basic
and General Terms (International) (H)
1985 Amd 1 Vocabulary of Metrology Part 1:
Basic and General Terms (International)
1980 Amd 1 Vocabulary of Metrology Part 2:
Vocabulary of Legal Metrology Fundamental Terms (Formerly PD 6461:
1980 Replaces BS PD 6461: 1971) (H)
1995 Vocabulary of Metrology Part 3: Guide
to the Expression of Uncertainty in
PD 6472
PD 6481
PD 6482
PD 6506
PD 6490
PD 6495
PD 6495
PD 6532-3
PD 6599
PD 6501 PART 5
PD 6503 PART 1
PD 6513
PD 6516
PD 6528
PD 6532 PART 1
PD 6503 PART 2
Measurement (H)
1974 Guide to Specifying the Quality of
Building Mortars
1977 Recommendations for the Use of
Preferred Numbers and Preferred Sizes
(Replaces BS 4318: 1968 and BS DD 29:
1973)
1983 Preparation of Visual Aids for Lectures
(Replaces BS PD 6482: 1977)
(OBSOLESCENT) 1982 Amd 1 Guide for
Typewriting
1980 Amd 1 Guide to Application of
Additional Symbols (and Index) for Machine
Tools (See Supplement to BS 3641)
1992 IFAN - Guide 1 Method for
Determining the Advantages of (Company)
Standardization Projects (Replaces BS PD
6495: 1983) (G)
1983 Calculation of the Profitability of
(Company) Standardization Projects
2000 Guide to the Uses of Certified
Reference Materials ISO Guide 33:2000; (G)
1996 Comparison of Different Information
Modelling Approaches and Styles (S)
1990 Preparation of British Standards for
Building and Civil Engineering Part 5: Guide
to Technical Committees on the Preparation
of Performance Specifications in British
Standards for Construction Products
1990 Toxicity of Combustion Products Part
1: General (ISO/TR 9122-1: 1989)
1985 Magnetic Particle Flaw Detection
1987 Guarding Fires and Heating Appliances
1990 Method for Verifying Accuracy of Tan
Delta Measurements Applicable to
Capacitors
1993 Reference Materials Part 1: Guide to
Terms and Definitions Used in Connection
with Reference Materials (ISO Guide 30:
1992) (G)
1988 Amd 1 Toxicity of Combustion
Products Part 2: Guide to the Relevance of
Small-Scale Tests for Measuring the Toxicity
of Combustion Products of Materials (AMD
6030) September 30, 1988 (Replaces BS PD
6503: 1982)
PD 6512 PART 3
PD 6580 PART 2
PD 6569SEC 3.1
PD 6569SEC 3.2
PD 6569SEC 6.1
PD 6569SEC 6.2
PD 6569PART 7
PD 6570 PART 1
1987 Use of Elements of Structural
Protection with Particular Reference to the
Recommendations Given in BS 5588 Fire
Precautions in the Design and Construction
of Buildings Part 3: to the Fire Performance
of Glass
1995 Home and Building Electronic Systems
Technical Report 2: Guidelines for the
Professional Installation of Twisted Pair
Cables Class 1 (S)
(OBSOLESCENT) 1992 Apparatus with One
or More Particular Functions for Connection
to Public Switched Telephone Networks Run
by Certain Public Telecommunications
Operators Part 3: Apparatus with AutoCalling, Auto-Answering and Auto-Clearing
Facilities Sec
(OBSOLESCENT) 1992 Apparatus with One
or More Particular Functions for Connection
to Public Switched Telephone Networks Run
by Certain Public Telecommunications
Operators Part 3: Apparatus with AutoCalling, Auto-Answering and Auto-Clearing
Facilities Sec
(OBSOLESCENT) 1992 Apparatus with One
or More Particular Functions for Connection
to Public Switched Telephone Networks Run
by Certain Public Telecommunications
Operators Part 6: Specification for Series
Connected Apparatus Section 6.1: Apparatus
Having M
(OBSOLESCENT) 1992 Apparatus with One
or More Particular Functions for Connection
to Public Switched Telephone Networks Run
by Certain Public Telecommunications
Operators Part 6: Specification for Series
Connected Apparatus Section 6.2: 1992
Apparatus Hav
(OBSOLESCENT) 1992 Apparatus with One
or More Particular Functions for Connection
to Public Switched Telephone Networks Run
by Certain Public Telecommunications
Operators Part 7: Specification for Apparatus
with Call Barring Facilities This Document is
a
(OBSOLESCENT) 1992 Apparatus Using
PD 6570 PART 2
PD 6570 PART 6
PD 6571
PD 6572
PD 6585-1
PD 6585-2
PD 6591
Cordless Attachments (Excluding Cellular
Radio Apparatus) for Connection to
Analogue Interfaces of Public Switched
Telephone Networks Run by Certain Public
Telecommunication Operators Part 1:
Specification for General Re
(OBSOLESCENT) 1992 Apparatus Using
Cordless Attachments (Excluding Cellular
Radio Apparatus) for Connection to
Analogue Interfaces of Public Switched
Telephone Networks Run by Certain Public
Telecommunications Operators Part 2:
Specification for Cordless
(OBSOLESCENT) 1992 Apparatus Using
Cordless Attachments (Excluding Cellular
Radio Apparatus) for Connection to
Analogue Interfaces of Public Switched
Telephone Networks Run by Certain Public
Telecommunications Operators Part 6:
Specification for Cordless
(OBSOLESCENT) 1992 Apparatus with One
or More Particular Functions for Connection
to Public Switched Telephone Networks Run
by Certain Public Telecommunication
Operators Part 2: Specification for Apparatus
with Loudspeaking Facilities (This
Document Conta
(OBSOLESCENT) 1992 Apparatus Using
Cordless Attachments (Excluding Cellular
Radio Apparatus) for Connection to
Analogue Interfaces of Public Switched
Telephone Networks Part 6: Specification for
Cordless Portable Parts and Cordless Fixed
Parts as Separate
1996 Hand-Arm Vibration - Guidelines for
Vibration Hazards Reduction Part 1:
Engineering Methods by Design of
Machinery (CR 1030-1: 1995) (F)
1996 Hand-Arm Vibration - Guidelines for
Vibration Hazards Reduction Part 2:
Management Measures at the Workplace (CR
1030-2: 1995) (F)
1996 Guidelines on How to Use Anechoic
Enclosures that Do Not Fulfil the
Requirements Regarding Normalized Site
Attenuation for Pre-Compliance Tests of
PD 6597
PD 6598
PD 6601
PD 6604
PD 6604
PD 6612
PD 6605-1
PD 6605-2
PD 6612
PD 6614
PD 6615
PD 6620
PD 6621
PD 6624
Products (H)
1996 Biotechnology - Microorganisms Examination of the Various Existing Lists of
Plant Pathogens and Production of a Report
(CR 12292: 1996) (G)
1996 Measurement Techniques for the
Characterization of the European Mini Test
Chip (S)
1996 JESSI 0.8micrometer CMOS Transistor
Model for Analogue and Digital Circuit
Simulation (S)
1997 Destructive Tests on Welds in Metallic
Materials - Etchants for Macroscopic and
Microscopic Examination (F)
1997 Amd 1 Destructive Tests on Welds in
Metallic Materials - Etchants for
Macroscopic and Microscopic Examination
AMD 9794; January 15, 1998; (F)
1997 Guidance on the Preparation of Codes
of Practice for Building (G)
1998 Guidance on Methodology for
Assessment of Stress-Rupture Data - Part 1:
Procedure for Derivation of Strength Values
(S)
1998 Guidance on Methodology for
Assessment of Stress-Rupture Data - Part 2:
Computing Methods (S)
1997 Amd 1 Guidance on the Preparation of
Codes of Practice for Building AMD 10050;
June 1998; (G)
1999 Obsolescence Management - Guide to
the Substitution of Components in Electronic
Equipment (G)
1998 Guide to Setting up a Parts Database
(G)
1998 Mains Communications Systems Protocol and Data Integrity and Interfaces (S)
1998 Guidance on the New European Test
Method Standards for Thermal Insulation
Materials (F)
2000 PNO-ISC/SER/002 Service Description
Number 002 Calling Line Indentification
Presentation (CLIP) Calling Line
Indentification Restriction (CLIR)
(Incorporating Calling Number Display)
Supplementary Services (S)
PD 6625
PD 6626
PD 6627
PD 6631
PD 6645
PD 6635
PD 6639
PD 6651
PD 6671
PD 6640
PD 6645
PD 6646
PD 6650
PD 6651
PD 6652
PD 6653
2000 PNO-ISC Service Description Number
001 Completion of Calls to Busy Subscriber
(CCBS) Supplementary service (S)
2000 PNO-ISC Service Description Number
003 Geographic Number Portability (S)
2001 PNO-ISC Information Number 007 UK
Interconnect User of SCCP & MTP (S)
1998 Technical Guide to ISO/IEC 13522-5:
1997 Information Technology - Coding of
Multimedia and Hypermedia Information Part 5: Support for Base-Level Interactive
Applications (MHEG-5) (S)
2001 PNO-ISC Specification Number 006
Interconnect User Part (IUP) (S)
1999 Non-Alloy Steel Rod for Drawing
and/or Cold Rolling - General Purpose Rod,
Rimmed and Rimmed Substitute Low Carbon
Steel Rod, Rod for Special Applications Requirements and Tests (V)
2001 PNO-ISC Specification Number 005 C7
Interconnect Meassage Transfer Part (MTP)
(S)
2001 PNO-ISC Specification Number 008
IUP - ISUP Interworking (S)
2001 PNO-ISC/SER/012 Textphone
Messaging Service Description (S)
1999 PNO-ISC Information Document 010
Recommendations for Short Term Solutions
to Support a Service Provider Access
Interface (S)
2002 Corr 1 PNO-ISC Specification Number
006 Interconnect User Part (IUP) CORR
13734: March 6, 2002; (S)
1999 PNO-ISC SPEC/001 - PNO-ISC
Specification Number 001 Use of SS No. 7
Point Codes for Network Interconnect in the
UK (S)
1999 PNO-ISC Specification Number 004 C7
Interconnect Transaction Capabilities (TC)
(S)
2002 Corr 1 PNO-ISC Specification Number
008 IUP - ISUP Interworking CORR 13733:
March 5, 2002 (S)
1999 PNO-ISC Service Description Number
009 Operator Services (S)
1999 PNO-ISC Service Description Number
PD 6662
PD 6665
PD 6668
PD 6654
PD 6656
PD 7003
PD 7005
PD 7005
PD 7010
PD 7010
PD 7020
PD 7021
010 Pulic Network Features to Support a
Messaging Service (S)
2000 Scheme for the Application of
European Standards for Intruder Alarm
Systems (G)
2000 PNO-ISC Service Description Number
007 Non Geographic Number Portability (S)
2000 Managing Risk for Corporate
Governance (G)
2001 PNI-ISC/SER/004 Call Forwarding on
Subscriber not Reachable Supplementary
Service (S)
2000 PNO_ISC Service Description Number
006 High Level Service Description for
Targeted Transit (S)
1995 Essential Requirements for Terminal
Equipment Intended for Connection to
Analogue Interfaces of the PSTN Using
Direct Dialling in (S)
1996 Essential Requirements for Terminal
Equipment Intended for Connection to the
Extended Total Access Communications
System (ETACS) (S)
1996 Amd 1 Essential Requirements for
Terminal Equipment Intended for Connection
to the Extended Total Access
Communications System (ETACS) AMD
9483; February 15, 1997; (S)
1997 Essential Requirements for a Handset
Telephony Facility Provided by Terminal
Equipment Intended for Direct Connection to
an Analogue Interface of the Public Switched
Telephone Networks (S)
1997 Amd 1 Essential Requirements for a
Handset Telephony Facility Provided by
Terminal Equipment Intended for Direct
Connection to an Analogue Interface of the
Public Switched Telephone Networks AMD
9894; February, 1998; (S)
1996 Essential Requirements for Terminal
Equipment Intended for Connection to 2Wire Analogue Speechband Leased Lines of
the Public Telecommunications Network (S)
1996 Essential Requirements for Terminal
Equipment Intended for Connection to 4Wire Analogue Speechband Leased Lines of
PD 90022
PD 90022
PD 90023
PD 7028
PD 7300
PD 7304
PD 7639 PART 1
DD 238 PART 6
DD 239
DD 241 PART 1
PD 7777
PD 90021
PD 9002 EDITION 2
PD 90022
PD 7639 PART 2
the Public Telecommunications Network (S)
1992 BS 9000 - IECQ Qualified Products
List (T)
1991 BS 9000 - IECQ Qualified Products
List (T)
1992 BS 9000 - IECQ Qualified Products
List (T)
1996 Essential Requirements for Terminal
Equipment Intended for Connection to
Analogue Baseband Leased Lines of the
Public Telecommunications Network (S)
1979 Nuts and Bolts: Recommended
Drawing Ratios for Schools and Colleges.
Teachers' Notes
1982 Introduction to Geometrical
Tolerancing (Wallchart and Transparencies
Are Unfilmable)
1994 Short-Circuit Current Calculation in
Three-Phase a.c. Systems Part 1: Factors for
the Calculation of Short-Circuit Currents in
Three-Phase a.c. Systems According to BS
7639 (IEC 909-1: 1991) (E)
1996 Fieldbus Part 6: Fieldbus Message
Specification (S)
1998 Recommendations for Preservation of
Timber (W)
1997 ControlNet Part 1: General Description
(S)
2000 Alternative Steel Selection and Its
Effect on Design and Testing of Tanks to BS
7777 (Q)
1998 Register of Firms, Products and
Services Approved under the BS 9000
System; Including Information on UK
Approvals under the IECQ System (T)
1997 Register of Firms, Products and
Services Approved under the BS 9000
System Including Information on UK
Approvals under the IECQ System (T)
1995 Register of Firms, Products and
Services Approved Under the BS 9000
System Including Information on UK
Approvals Under the IECQ System (T)
1994 Short-Circuit Current Calculation in
Three-Phase a.c. Systems Part 2: Data for
Electrical Equipment for Short-Circuit
PD 90022
PD 9002 EDITION 3
PD 90023
PD 9004
PD 9004
PD ISO/TR 10013
PD ISO/TR 10017
PD CR 13425
PD CR 13436
PD CR 13737
PD CR 10313
PD ISO/TR 11018
PD CR 12660
PD 12700
PD CR 13097
PD CR 13426
PD CR ISO 13434
Current Calculations in Accordance with BS
7639 (IEC 909-2: 1992) (E)
1994 Register of UK Approvals Under the
BS 9000 System BS 9000 System of Quality
Assessment for Electronic Components (T)
1996 Register of Firms, Products and
Services Approved under the BS 9000
System Including Information on UK
Approvals under the IECQ System (T)
1994 Register of UK Approvals Under the
BS 9000 System BS 9000 System of Quality
Assessment for Electronic Components (T)
1989 Amd 1 BS 9000 CECC & IECQ UK
Administrative Guide February 1991
(Replaces BS PD 9004: 1996)
1989 Amd 7 BS 9000 CECC & IECQ UK
Administrative Guide August 1994 (Replaces
BS PD 9004: 1986) (T)
2001 Guidelines for Quality Management
System Documentation ISO/TR 10013:2001;
Supersedes BS ISO 10013:1995; (G)
2000 Guidance on Statistical Techniques for
ISO 9001:1994 ISO/TR 10017: 1999; (G)
1999 Geographic Information - Overview (S)
1999 Geographic Information - Vocabulary
(G)
2000 Implementation Guide for Functional
Standards Prepared by CEN/TC 234
2000 Classification of Grades of Steel Examples of Classification Related to
European Standards (V)
2001 Essential Oils - General Guidance on
the Determination of Flashpoint (W)
1999 Geographic Information - Processing Query and Update: Spatial Aspects (S)
1998 Supporting Document to ENV
1613:1994 - Messages for Exchange of
Laboratory Information (S)
2001 Characterization of Sludges - Good
Practice for Utilisation in Agriculture (N)
1999 Biotechnology - Microorganisms Report on the Criteria Used to Classify
Group 1 Genetically Modified
Microorganisms (H)
1999 Guidelines on Durability of Geotextiles
and Geotextile-Related Products (L)
PD ISO/TR 13570
PD CR 13576
PD CR 13643
PD CR 13825
PD CR 13934
PD CR 13935
DD 238 PART 4
PD CR 13644
PD CR 13694
PD CR 13714
PD CR 13767
PD CR 13768
PD 13846
PD CR 13909
PD ISO/TR 13881
PD CR 13933
2001 Guidelines for the Appplication of the
ISO 7176 Series on Wheelchairs ISO/TR
13570:2001; (N)
1999 Implementation of EN 729 on Quality
Requirements for Fusion welding of Metallic
Materials (F)
2001 Machine Readable Cards - Healthcare
Applications - Logical Data Structures and
Concepts for Different Card Technologies for
Use by Patients in Health Applications (S)
2000 Luer Connectors - a Report to CEN
CHeF from the CEN Forum Task Group
2001 Interpretation Document of EN 3
Portable Fire Extinguishers (G)
2000 Non-Destructive Testing - Generic
NDE Data Format Model (G)
1996 Fieldbus Part 4: Specification for Data
Link Protocol (S)
2001 Machine Readable Cards - Healthcare
Applications - Logical Organisation of Data
on Healthcare Professional Cards (S)
1999 Health Informatics - Safety and
Security Related Software Quality Standards
for Healthcare (SSQS) (S)
2001 Characterisation of Sludges - Sludge
Management in Relation to Use or Disposal
(N)
2001 Characterization of Sludges - Good
Practice for Sludges Incineration with and
without Grease and Screenings (N)
2001 Characterization of Sludges - Good
Practice for Combined Incineration of
Sludges and Household Wastes (N)
2000 Corr 1 Recommendations to Preserve
and Extend Sludge Utilization and Disposal
Routes CORR 10986; June 2000; CR 13846:
2000; (N)
2002 Identification Card Systems Intersector Thin Flexible Cards - Acceptance
Criteria (S)
2001 Petroleum and Natural Gas Industries Classification and Conformity Assessment of
Products, Processes and Services (G)
2000 Masonry Cement - Testing for
Workability (Cohesivity) CR 13933:2000;
(R)
PD ISO/TR 14032
PD ISO/TR 14049
PD CR 14230
PD CR ISO 15608
PD ES 59008-1
PD CR 14244
PD ES 59008-4-4
PD ES 59008-5-1
PD ES 59008-5-2
PD ES 59008-5-3
PD ES 59008-6-1
PD ES 59008-6-2
PD ES 59011
2000 Environmental Management Examples of Environmental Performance
Evaluation (EPE) ISO/TR 14032: 1999; (N)
2000 Environmental Management - Life
Cycle Assessment - Examples of Application
of ISO 14041 to Goal and Scope Definition
and Inventory Analysis ISO/TR 14049: 2000;
(G)
2001 Global Medical Device Nomenclature
for the Purpose of Regulatory Data Exchange
(G)
2000 Welding - Guidelines for a Metallic
Material Grouping System (F)
2000 Data Requirements for Semiconductor
Die - Part 1: General Requirements (S)
2001 Durability of Wood and Wood-Based
Products - Recommendations for
Measurement of Emissions to the
Environment from Treated Wood in Service
(V)
2000 Data Requirements for Semiconductor
Die - Part 4-4: Specific Requirements and
Recommendations - Electrical Simulation (S)
2001 Data Requirements for Semiconductor
Die - Part 5-1: Particular Requirements and
Recommendations for Die Types - Bare Die
ES 59008-5-1:2001; (S)
2001 Data Requirements for Semiconductor
Die - Part 5-2: Particular Requirements and
Recommendations for Die Types - Bare Die
with Added Connection Structures ES 590085-2: 2001; (S)
2001 Data Requirements for Semiconductor
Die - Part 5-3: Particular Requirements and
Recommendations for Die Types Minimally-Packaged Die ES 59008-5-3:
2001; (S)
1999 Data Requirements for Semiconductor
Die - Part 6-1: Exchange Data Formats and
Data Dictionary - Data Exchange - DDX File
Format (S)
2001 Data Requirements for Semiconductor
Die - Part 6-2: Data Dictionary (S)
2001 Representation of Quality Rules and
Metrics for Hardware and Software Design
Languages ES 59011:2001; (S)
PD 60065
S 530
S 532
S 533
S 534
PD IEC 60079-20
S 535
S 536
S 537
S 538
SP 10-11
SP 13-16
SP 18-19
SP 22-27
2001 Interpretation Sheets for BS EN
60065:1998, Audio, Video and Similar
Electronic Apparatus - Safety Requirements
(S)
1970 24/17 Chromium- Nickel HeatResisting Steel Sheet and Strip (Titanium
Stabilized: 54 Hbar) (Elevated Temperature
Properties Not Verified) (Replaces BS S 522:
1956)
1969 Amd 1 Chromium-Nickel-CopperMolybdenum Corrosion- Resisting Steel
Sheet and Strip (Precipitation Hardening:
98/118 Hbar)
1969 Amd 1 Chromium-Nickel- CopperMolybdenum Corrosion-Resisting Steel
Sheet and Strip (Precipitation Hardening:
118/137 H Bar)
1969 Chromium-Molybdenum Steel Sheet
and Strip (88/108 Hbar) (Suitable for
Welding) (Replaces BS S 518: 1956)
2000 Electrical Apparatus for Explosive Gas
Atmospheres - Part 20: Data for Flammable
Gases and Vapours, Relating to the use of
Electrical Apparatus IEC 60079-20: 1996;
(Q)
1969 Chromium-Molybdenum Steel Sheet
and Strip (115/130 Hbar) (Suitable for
Welding) (Replaces BS S 519: 1956)
1970 Low Carbon 18/10 Chromium-Nickel
Corrosion-Resisting Steel Sheet and Strip (50
Hbar)
1970 Low Carbon 17/12 Chromium-NickelMolybdenum Corrosion- Resisting Steel
Sheet and Strip (50 Hbar)
1975 Chromium-Cobalt- MolybdenumVanadium Heat-Resisting Steel Sheet and
Strip (930- 1130 MPa: Maximum Thickness
6 mm) (Cr 12, Co 2.5, Mo 1.7, V 0.3)
1949 Amd 1 Washers for Aircraft (Primarily
for Facing Purposes)
1949 Amd 3 Washers for Aircraft (Primarily
for Packing Purposes)
1949 Amd 2 Washers for Aircraft (Primarily
for Use with Timber)
1950 Amd 1 B.A. Washers for Aircraft
Purposes (Primarily for Instrument Use)
SP 28-29
SP 33-39
SP 51-52
SP 53
SP 55-56
SP 59-60
SP 54
SP 57-58
SP 94
SP 101-104
SP 107-112
SP 113
SP 114
SP 115-117
SP 119-120
SP 121
SP 128-133
SP 134-138
SP 139-140
SP 122-125
SP 126-127
SP 141
SP 144-147
1951 Amd 3 Solid Taper Pins for
Aeronautical Purposes (Formerly SP 28,29
and 30: 1951)
1951 Amd 3 Turnbarrels, Tension Rods and
Swaged Cable- End Connections for Aircraft
1953 Amd 2 Identification Tags for Swaged
Cable-End Assemblies for Aircraft
1953 Amd 3 Swaged Cable-End Assemblies
(B.A. and B.S.F. Threads) for Preformed
Steel Wire Rope for Aircraft
1953 Amd 2 Double Coil Spring Washers for
Aircraft
1955 Spring Catches for Aeronautical
Purposes
1953 Amd 4 Swaged Cable-End Assemblies
(B.A. and B.S.F. Threads) for Preformed
Non-Corrodible Steel Wire Rope
1955 Amd 1 Rivet Burrs for Aircraft (AMD
4700) March 29, 1985
1964 Amd 1 Bronze Oil-Retaining Bushes
and Thrust Washers for Aircraft
1956 Amd 1 Turnbarrels, Tension Rods and
Swaged Cable- End Connections (Unified
Threads) for Aircraft
1954 Amd 2 Tab Washers for Unified
Hexagons for Aircraft
1954 Amd 3 Cadmium Plated Close
Tolerance Shear Pins for Aircraft
1955 Amd 3 Eye Bolts (Unified Threads) for
Aircraft (AMD 3350) July 31, 1980
1956 Amd 4 Hydraulic Surface-Check Type
Lubricating Nipples for Aircraft
1957 Amd 1 High Tensile Steel Fork Joints
1958 Collars for Shear Pins for Aircraft
1965 Wood Screws for Aircraft (Replaces BS
SP 61 to 64: 1955)
1968 Copper Beryllium Crinkle Washers
1969 Amd 1 Corrosion-Resisting Steel
Crinkle Washers
1958 Washers for Unified Hexagons for
Aircraft (Primarily for Packing Purposes)
1959 Washers for Unified Hexagons for
Aircraft (Primarily for Facing Purposes)
1970 Design and Performance Requirements
for Toggle Type Panel Fasteners
1971 Amd 2 Corrosion Resisting Worm
SP 164
SP 166
SP 172
T 76
T 78
T 79
T 64
T 67
T 69
T 72-73
T 80
V 38
W 14
T 72-73
T 74
T 75
Drive Clamps for Aircraft
1978 Specification for Design and
Performance Requirements for Turnlock,
Stud-Type Panel Fasteners (Metric Series)
1982 Spring Retaining Rings for Aerospace
Application: Carbon Steel Circlips (Metric
Series) (Replaces the Metric Series Specified
in SP 96: 1968)
1999 Aerospace - Rivets, Solid, in
Aluminium or Aluminium Alloys Procurement Specifcation ISO 9418: 1998
1978 Amd 1 Chromium-Molybdenum Steel
Tube (770 MPa) (Weldable)
1997 2 1/2 % Nickel-ChromiumMolybdenum Steel Tubes (1390 MPa) (S)
1997 2 1/2 % Nickel-ChromiumMolybdenum Steel Tubes (1160 MPa) (S)
(OBSOLESCENT) 1972 Carbon-Manganese
Steel Tube (550 N/Square mm) (Tube Less
Than 12.5 mm Outside Diameter (Weldable)
(Replaces BS 3T 35: 1948)
(OBSOLESCENT) 1972 18/10 ChromiumNickel Corrosion-Resisting Steel Tube
(Titanium mm) (Weldable) (Replaces BS T
55: 1948)
(OBSOLESCENT) 1972 Cold Drawn 18/10
Chromium-Nickel Corrosion-Resisting Steel
Tube (Titanium Stabilized: 800 N/ Square
MM) (Weldable) (Replaces BS T 58: 1948)
1977 18/10 Chromium-Nickel CorrosionResisting Steel Tube for Hydraulic Purposes
(Niobium/ Titanium Stabilized: 550 MPa)
1997 12 % Chromium Corrosion-Resisting
Steel Tubes (770 MPa) (S)
1967 Sitka Spruce as Rough Timber
1999 Aircraft Control Wire Rope Assemblies
- Technical Specification ISO 9763: 1999;
(S)
1977 Amd 1 18/10 Chromium-Nickel
Corrosion-Resisting Steel Tube for Hydraulic
Purposes (Niobium/ Titanium Stabilized: 550
MPa) (AMD 6852) December 24, 1991
(OBSOLESCENT) 1972 Low Carbon 18/10
Chromium-Nickel Corrosion-Resisting Steel
Tube (500 N/Square mm)
(OBSOLESCENT) 1972 Low Carbon 17/12
T 77
X 35
TA 38
TA 39
TA 40
TA 41
TA 42
TA 43
TA 44
PAS 021
TA 52
TA 53
Chromium-Nickel-Molybdenum CorrosionResisting Steel Tube (500 N/Square MM)
1980 Chromium-Molybdenum Steel Tube
(900 MPa) (Weldable) (Replaces BS T 65:
1972)
1998 Selectively Removable Intermediate
Coating for Aerospace Purposes (S)
1971 Bar for Machining of TitaniumAluminium- Molybdenum-Tin-SiliconCarbon Alloy (Tensile Strength 1250-1420
N/Square mm) (Limiting Ruling Section 25
mm)
1971 Forging Stock of Titanium-AluminiumMolybdenum-Tin-Silicon- Carbon Alloy
(Tensile Strength 1250-1420 N/ Square mm)
(Limiting Ruling Section 25 mm)
1971 Bars for Machining of TitaniumAluminium- Molybdenum-Tin-SiliconCarbon Alloy (Tensile Strength 1205-1375
N/ Square mm) (Limiting Ruling Section
over 25 mm up to and Including 75 mm)
1971 Forging Stock of Titanium-AluminiumMolybdenum-Tin-Silicon- Carbon Alloy
(Tensile Strength 1205-1375 N/ Square mm)
(Limiting Ruling Section over 25 mm up to
and Including 75 mm)
1971 Forgings of Titanium- AluminiumMolybdenum- Tin-Silicon-Carbon Alloy
(Tensile Strength 1205- 1375 N/Square mm)
(Limiting Ruling Section over 25 mm up to
and Including 75 mm)
(OBSOLESCENT) 1972 Amd 2 Forging
Stock of Titanium-Aluminium- ZirconiumMolybdenum- Silicon Alloy (Tensile
Strength 990-1140 N/ Square mm) (Limiting
Ruling Section 65 mm)
(OBSOLESCENT) 1972 Amd 2 Forgings of
Titanium- Aluminium-ZirconiumMolybdenum-Silicon Alloy (Tensile Strength
990-1140 N/Square mm) (Limiting Ruling
Section 65 mm)
1997 Helmets for Firefighters (N)
1973 Amd 2 Sheet and Strip of TitaniumCopper Alloy (Tensile Strength 690- 920
N/Square mm)
(OBSOLESCENT) 1973 Amd 1 Bars and
TA 54
TA 45
TA 46
TA 47
TA 48
TA 49
TA 50
TA 51
Sections for Machining of Titanium- Copper
Alloy (Tensile Strength 650-880 N/ Square
mm) (Limiting Ruling Section 75 mm)
(OBSOLESCENT) 1973 Amd 1 Forging
Stock of Titanium-Copper Alloy (Tensile
Strength 650- 880 N/Square mm) (Limiting
Ruling Section 75 mm)
1973 Amd 1 Bar and Section for Machining
of Titanium- Aluminium-Molybdenum- TinSilicon Alloy (Tensile Strength 1100- 1280
N/Square mm) (Limiting Ruling Section 25
mm) (Replaces BS TA 29: 1969)
1973 Amd 1 Bar and Section for Machining
of Titanium- Aluminium-Molybdenum- TinSilicon Alloy (Tensile Strength 1050- 1220
N/Square mm) (Limiting Ruling Section over
25 mm up to and Including 100 mm)
(Replaces BS TA 32: 1969 and BS TA 35:
1969)
1973 Amd 1 Forging Stock of TitaniumAluminium- Molybdenum-Tin-Silicon Alloy
(Tensile Strength 1050-1220 N/Square mm)
(Limiting Ruling Section 100 mm) (Replaces
BS TA 30: 1969 BS TA 33: 1969 and BS TA
36: 1969)
1973 Amd 1 Forgings of TitaniumAluminium-Molybdenum- Tin-Silicon Alloy
(Tensile Strength 1050- 1200 N/Square mm)
(Limiting Ruling Section 100 mm) (Replaces
BS TA 31: 1969 BS TA 34: 1969 and BS TA
37: 1969)
1973 Amd 1 Bar and Section for Machining
of Titanium- Aluminium-Molybdenum- TinSilicon Alloy (Tensile Strength 1000 1200
N/Square mm) (Limiting Ruling Section over
100 mm up to and Including 150 mm)
(Replaces BS TA 35: 1969
1973 Amd 1 Forging Stock of TitaniumAluminium- Molybdenum-Tin-Silicon Alloy
(Tensile Strength 1000-1200 N/ Square mm
(Limiting Ruling Section over 100 mm up to
and Including 150 mm) (Replaces BS TA 36:
1969)
1973 Amd 1 Forgings of TitaniumAluminium-Molybdenum- Tin-Silicon Alloy
(Tensile Strength 1000- 1200 N/Square mm)
TA 55
TA 56
TA 57
TA 58
TA 59
W 13
X 26
X 34
X 33
X 34
X 34
X 36
Z1
Z2
Z3
(Limiting Ruling Section over 100 mm Up to
and Including 150 mm) (Replaces BS TA 37:
1969)
(OBSOLESCENT) 1973 Amd 1 Forgings of
Titanium- Copper Alloy (Tensile Strength
650-880 N/ Square mm) (Limiting Ruling
Section 75 mm)
1974 Amd 1 Plate of Titanium- AluminiumVanadium Alloy (Tensile Strength 895-1150
MPa) (Maximum Thickness 100 mm)
1974 Amd 1 Plate of Titanium- AluminiumMolybdenum- Tin-Silicon (Tensile Strength
1030-1220 MPa) (Maximum Thickness 65
mm)
1974 Amd 2 Plate of Titanium- Copper Alloy
(Tensile Strength 520-640 MPa) (Maximum
Thickness 10 mm) (AMD 5464) April 30,
1987
1980 Amd 2 Sheet amd Strip of TitaniumAluminium-Vanadium Alloy (Tensile
Strength 920 MPa to 1180 MPa)
1973 Preformed Corrosion- Resisting Steel
Wire Rope (ISO Diameters and Strength)
1966 Doping and Finishing Schemes for
Fabric Covered Aircraft
1992 Air Drying, Two Component,
Polyurethane Finish for Aerospace Purposes
1991 Amd 1 Two Component Epoxy Primer
for Aerospace Purposes (AMD 7164) May 1,
1992
1992 Amd 1 Air Drying, Two Component,
Polyurethane Finish for Aerospace Purposes
(AMD 7518) January 15, 1993
1992 Amd 2 Air Drying, Two Component,
Polyurethane Finish for Aerospace Purposes
AMD 8468; April 15, 1995; (S)
1998 Paint Remover for Air Drying
Selectively Removable Paint Scheme for
Aerospace Purposes (S)
1997 Space Data and Information Transfer
Systems - Radio Metric and Orbit Data ISO
11103: 1991; (S)
1997 Space Data and Information Transfer
Systems - Time Code Formats ISO 11104:
1991; (S)
1997 Space Data and Information Transfer
PAS 008 ISSUE 3
Z4
Z5
Z6
Z7
Z8
Z9
Z 10
Z 11
Z 12
Z 13
Z 14
Z 15
Systems - Telemetry Channel Coding ISO
11754: 1994; (S)
1993 Cricketer's Helmets (L)
1997 Space Data and Information Transfer
Systems - Standard Formatted Data Units Structure and Construction Rules ISO 12175:
1994; (S)
1997 Space Data and Information Transfer
Systems - Standard Formatted Data Units Control Authority Procedures ISO 13764:
1996; (S)
1998 Space Data and Information Transfer
Systems - Parameter Value Language
Specification ISO 14961: 1997; (S)
1998 Space Data and Information Transfer
Systems - ASCII Encoded English ISO
14962: 1997; (S)
1998 Space Data and Information Transfer
Systems - Packet Telemetry ISO 13419:
1997; (S)
1998 Space Data and Information Transfer
Systems - Advanced Orbiting Systems Networks and Data Links - Architectural
Specification (S)
1998 Space Data and Information Transfer
Systems - Standard Formatted Data Units Control Authority Data Structures ISO
15395: 1998; (S)
1998 Space Data and Information Transfer
Systems - Cross Support Reference Model Space Link Extension Services ISO 15396:
1998; (S)
1998 Space Data and Information Transfer
Systems - Telecommand - Channel Service Architectural Specification ISO 12171; 1998;
(S)
1998 Space Data and Information Transfer
Systems - Telecommand - Data Management
Service - Architectural Specification ISO
12174; 1998; (S)
1998 Space Data and Information Transfer
Systems - Telecommand - Command
Operation Procedures ISO 12173: 1998; (S)
1998 Space Data and Information Transfer
Systems - Telecommand - Data Routing
Service ISO 12172: 1998; (S)
PAS 016
BS Z 19
Z 100
PAS 003
PAS 29
PAS 36-1
PAS 36-2
PAS 23-1
PAS 23-1
PAS 24-1
PAS 24-1
PAS 25
PAS 32-1
PAS 32-2
PAS 33
PD 308
1995 Integrated Protection Helmets Issue 1;
(N)
2000 Space Data and Information Transfer
Systems - Data Description Language EAST Specification ISO 15889:2000; (S)
1999 Space Systems - Ground Support
Equipment for Use at Launch, Landing, or
Retrieval Sites - General Requirements ISO
14625: 1999; (S)
1994 Non-Rewireable 13A Plugs with Plastic
Socket Shutter Opening Pins Issue 2; (E)
1999 Disposable Pulp Products for Use in
Healthcare (H)
2000 Goals for Small-Sided Football - Part 1:
Specification for Metal Goals (L)
2000 Goals for Small-Sided Football - Part 2:
Specification for Plastics Goals (L)
1999 General Performance Requirements for
Door Assemblies - Part 1: Single Leaf,
External Door Assemblies to Dwellings (R)
1999 Amd 1 General Performance
Requirements for Door Assemblies - Part 1:
Single Leaf, External Door Assemblies to
Dwellings AMD 10971; April 2000; (R)
1999 Enhanced Security Performance
Requirements for Door Assemblies - Part 1:
Single Leaf, External Door Assemblies to
Dwellings (R)
1999 Amd 1 Enhanced Security Performance
Requirements for Door Assemblies - Part 1:
Single Leaf, External Door Assemblies to
Dwellings AMD 10972; April 2000; (R)
1999 Plastics Frames for Use in Gully Tops
and Manhole Tops for Pedestrian Areas (R)
1999 Specification for Examination and Test
of New Lifts Before Putting into Service Part 1: Electric Tractor Lifts (R)
1999 Specification for Examination and Test
of New Lifts Before Putting into Service Part 2: Hydraulic Lifts (R)
1999 Specification for the Design,
Installation and Commissioning of Gas Fired
Central Heating Systems in Domestic
Premises (R)
1996 Guide to the European Standards for
Engineering Drawing in the BS EN Series
PD 970
PD CR 1749
PD CR 1752
PD 2754 PART 2
PD 5304
PD 2777
PD 2777
PD 5500 ENQ CASE INTRO
PD 5500E/C INTRO
PD 5500E/C INTRO
PD 5500E/C INTRO
PD 5500ENQ CASE 33
PD 5500 ENQ CASE 58
PD 5500 ENQ CASE 68
PD 5500 ENQ CASE 73
PD 5500 ENQ CASE 87
PD 5500 ENQ CASE 92
PD 5500 ENQ CASE 112
(G)
2001 Wrought Steels for Mechanical and
Allied Engineering Purposes - Requirements
for Carbon, Carbon Manganese and Alloy
Hot Worked or Cold Finished Steels (V)
2001 European Scheme for the Classification
of Gas Appliances According to the Method
of Evacuation of the Products of Combustion
(Types) Supersedes PD 6579: 1999; (W)
1999 Ventilation for Buildings - Design
Criteria for the Indoor Environment (R)
1993 Classification of Electrical and
Electronic Equipment with Regard to
Protection Against Electric Shock Part 2:
Guide to Requirements for Protection
Against Electric Shock (IEC 536-2: 1992)
(E)
2000 Safe Use of Machinery (F)
1994 Fabric Flammability and Burning
Accidents (Replaces BS PD 2777: 1977) (L)
1977 Fabric Flammability Burning Accidents
and the Relevance of BS 5438
2000 Specification for Unfired Fusion
Welded Pressure Vessels Enquiry Cases:
Introduction (Q)
2000 Unfired Fusion Welded Pressure
Vessels Enquiry Cases: Introduction (Q)
2000 Unfired Fusion Welded Pressure
Vessels Enquiry Cases: Introduction (Q)
2000 Specification for Unfired Fusion
Welded Pressure Vessels Enquiry Cases:
Introduction (Q)
2000 Enquiry Case 33: Verification of Shape
of Vessels Subject to External Pressure (Q)
2001 Enquiry Case 5500/58 Bolted Flanges
Complying with ANSI B.16.5 Issue 3; (Q)
1986 Alternative Materials to BS 3601 360
(Q)
1987 Use of Enhanced 2 1/4Cr1Mo Steel in
Welded Pressure Vessels Complying with BS
5500 (Q)
2001 Use of Duplex for the Construction of
pressure Vessels to PD 5500 (Q)
2000 Design Stresses for ASTM A 193
Bolting Material (Q)
1996 Use of API 5L and ASTM A53 Pipe
PD 5500 ENQ CASE 91
PD 5500 ENQ CASE 105
PD 5500 ENQ CASE 106
PD 5500ENQ CASE 106
PD 5500 ENQ CASE 107
PD 5500 ENQ CASE 111
PD 5500 ENQ CASE 117
PD 5500ENQ CASE 119
PD 5500 ENQ CASE 122
PD 5500ENQ CASE 122
PD 5500 ENQ CASE 124
PD 5500 ENQ CASE 125
PD 5500 ENQ CASE 126
PD 5500 ENQ CASE 126
PD 5500ENQ CASE 127
PD 5500 ENQ CASE 128
PD 5500ENQ CASE 129
PD 5500 ENQ CASE 130
PD 5500ENQ CASE 130
PD 5500ENQ CASE 133
PD 5500 ENQ CASE 131
Materials Issue 2, (Q)
1991 Use of ASTM Materials for the
Construction of Pressure Vessels in
Accordance with BS 5500 (Q)
1997 Use of ECCS Rules for Calculation of
Allowable Longitudinal Compressive Stress
Issue 2, (Q)
1999 Examples to Illustrate the Assessment
of Vessels Subject to Fatigue (Q)
2001 Enquiry Case 5500/106: Examples to
Illustrate the Assessment of Vessels Subject
to Fatigue Issue 2; (Q)
1994 UT Sensitivity Setting for Sizing and
Sentencing of Indications Against Table
5.7(2) (Q)
2001 Use of Super Duplex Steel for the
Construction of pressure Vessels to PD 5500
1996 Flanges Fitted with Swing Bolts or
Clamps (Q)
2000 Enquiry Case 119: Global Loads at
Cylinder to Cone Junctions (Q)
2000 Local Loads on Nozzles (Q)
2000 Enquiry Case 122: Local Loads on
Nozzles (Q)
2001 Enquiry Case 5500/124: Stiffening
Rings for Horizontal Vessels Subject to
External Pressure and Dead Load Issue 2; (Q)
1999 Design Stresses for Flange Bolting (Q)
1999 Limpet Coils Issue 2, (Q)
2001 Enquiry Case 5500/126: Limpet Coils
Issue 2; (Q)
2000 Enquiry Case 127: Wind Loading (Q)
2001 Preliminary Rules for a Less
Conservative Design of Jacket Blocking
Rings (Q)
2000 Enquiry Case 129: Derivation of the
Maximum Stress in the Saddle Support
Region of a Horizontal Cylindrical Vessel,
for Use in a Fatigue Assessment (Q)
2000 Enquiry Case 5500/130: Shell Nozzles
Close to Discontinuities (Q)
2000 Enquiry Case 130: Shell Nozzels Close
to Discontinuities (Q)
2000 Enquiry Case 133: Flat Unstayed Ends
of Non-Circular Shape (Q)
2000 Enquiry Case 5500/131: Minimum
PD 5500ENQ CASE 131
PD 5500 ENQ CASE 132
PD 5500ENQ CASE 132
PD 6481C
PD 6455
PD 6457
L 119
L 154
L 155
L 158
L 159
L 160
Thickness of the Straight Cylindrical Flanged
Section of a Dished head (Q)
2000 Enquiry Case 131: Minimum Thickness
of Straight Cylindrical Flanged Section of a
Dished Head (Q)
2000 Enquiry Case 5500/132: Cone to
Cylinder Junctions Subject to a Reduced
Axial Pressure End Load (E.G Vapour Belts)
(Q)
2000 Enquiry Case 132: Cone to Cylinder
Junctions Subject to a Reduced Axial
Pressure End Load (e.g. Vapour Belts) (Q)
1977 Is an Extract from PD 6481
1970 Metric Dimensions for l.f. Cables and
Wire for Telecommunication (Partially
Replaced by BS 4808: Part 2: 1972 and BS
4808: Part 3: 1972)
1970 Guide to the Application of Addendum
Modification to Involute Spur and Helical
Gears
1975 Amd 2 Ingots and Castings of
Aluminium-Copper-Nickel- ManganeseTitanium- Zirconium-Cobalt- Antimony
Alloy (Solution Treated and Art. Aged) (Cu
5.0, Ni 1.5, Mn 0.25, Ti0.2, Zr 0.2, Co 0.2,
Sb 0.2) (AMD 6544) December 21, 1990
1977 Amd 2 Ingots and Castings of
Aluminium-Copper-Silicon Alloy (Solution
Treated and Aged at Room Temperature) (Cu
4, Si 1) (AMD 6546) April 30, 1991
1977 Amd 2 Ingots and Castings of
Aluminium-Copper-Silicon Alloy (Solution
Treated and Artificially Aged) (Cu 4, Si 1)
AMD 6545; March 28, 1991
(OBSOLESCENT) 1978 Close Toleranced
Sheet and Strip of Aluminium- CopperMagnesium- Silicon-Manganese Alloy
(Solution Treated and Aged at Room
Temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn
0.8)
(OBSOLESCENT) 1978 Close Toleranced
Sheet and Strip of Aluminium- CopperMagnesium- Silicon-Manganese Alloy (Cu
4.4, Mg 0.5, Si 0.8, Mn 0.8)
(OBSOLESCENT) 1976 AMD 1 Bars and
Extruded Sections of Aluminium- Zinc-
L 163
L 172
L 172
L 161
L 162
L 170
L 171
L 171
Magnesium-Copper- Chromium Alloy
(Solution Treated and Artificially Aged to an
Overaged Condition) (Zn 5.6, Mg 2.5, Cu
1.6, Cr 0.22) (Replaced by BS EN 2127:
1992)
(OBSOLESCENT) 1978 Sheet and Strip of
Aluminium-Coated Aluminium- CopperMagnesium-Silicon- Manganese Alloy (Cu
4.4, Mg 0.5, Si 0.8, Mn 0.8) (Replaces BS 3L
72: 1971)
1989 Amd 1 Extruded, Rolled on Cast
Forging Stock of Aluminium-ZincMagnesium-Manganese- Copper Alloy (S)
(AMD 6561) December 21, 1990
1989 Amd 2 Extruded, Rolled or Cast
Forging Stock of Aluminium-ZincMagnesium-Manganese- Copper Alloy
(AMD 6840) November 29, 1991
1976 Hand and Die Forgings of AluminiumZinc- Magnesium-Copper- Chromium Alloy
(Solution Treated and Artificially Aged to an
Overaged Condition) (Zn 5.6, Mg 2.5, Cu
1.6, Cr 0.22)
1976 Cold Compressed Hand Forgings of
Aluminium- Zinc-Magnesium-CopperChromium Alloy (Solution Treated and
Artificially Aged to an Overaged Condition)
(Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22)
1989 Amd 1 Extruded Bars and Sections of
Aluminium-Zinc-Copper-Chromium Alloy
(Solution Treated, Controlled Stretched and
Artificially Aged) (Not Excluding 150 mm
Diameter or Minor Sectional Dimensions)
(Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.23) (7075)
AMD 6838 No
1990 Forging of Aluminium- ZincMagnesium- Manganese-Copper Alloy
(Supplied As-Forged or Annealed for
Subsequent Heat Treatment) (Not Exceeding
150mm Diameter or Minor Sectional
Dimension) (Zn 5.7, Mg 2.7, Mn 0.5, Cu 0.5)
(7014)
1990 Amd 1 Forgings of Aluminium- ZincMagnesium- Manganese-Copper Alloy
(Supplied As-Forged or Annealed for
Subsequent Heat Treatment) (Not Exceeding
L 173
L 174
L 512
L 513
L 514
L 515
M 24
M 32
M 33
M 34
M 36
M 37
M 38
M 39
150mm Diameter or Minor Sectional
Dimension) (Zn 5.7, Mg 2.7, Mn 0.5, Cu 0.5)
(7014) (AMD 6839) November
1991 Castings of Aluminium- SiliconMagnesium Alloy, Chill Cast (Solution
Treated and Precipitation Treated to an
Overaged (T7) Condition)
1991 Castings of Aluminium- SiliconMagnesium Alloy, Sand Cast (Solution
Treated and Precipitation Treated to an
Overaged (T7) Condition)
(OBSOLESCENT) 1973 Bars and Extruded
Sections of Magnesium- 6 Per Cent
Aluminium- Zinc Alloy (Not Exceeding 150
mm Diameter or Minor Sectional Dimension)
(Replaces BS L 502: 1967)
1973 Forging Stock and Forgings of
Magnesium- 6 Per Cent Aluminium- Zinc
Alloy (Replaces BS L 502: 1967)
(OBSOLESCENT) 1973 Forging Stock and
Forgings of Magnesium- 3 Per Cent ZincZirconium Alloy (Replaces BS L 506: 1967)
(OBSOLESCENT) 1973 Sheet and Strip of
Magnesium-1 1/4 Per Cent Zinc-Zirconium
Alloy (Replaces BS L 507: 1967)
(OBSOLESCENT) 1955 Amd 1 Graphical
Symbols for Aircraft Hydraulic and
Pneumatic Systems
1969 Amd 3 Dimensions for Aircraft
Accessory Drives and Mounting Pads
(OBSOLESCENT) 1970 Dimensions of
Elastomeric Toroidal Sealing Rings (Inch
Series) to Class 1 Tolerances for Aircraft
(Replaced by M 48: 1975 for New Design)
1970 Method of Preparation and Use of
Radiographic Techniques
1970 Amd 1 Ultrasonic Testing of Special
Forgings by an Immersion Technique Using
Flat-Bottomed Holes as a Reference Standard
1970 Method for the Etch Inspection of
Metallic Material and Components
1971 Guide to Compilation of Instructions
and Reports for the In- Service and NonDestructive Testing of Aerospace Products
1972 Method for Penetrant Inspection of
Aerospace Materials and Components
M 40
M 42
M 43
M 44
M 48
M 55
M 56
M 57
M 58
M 62
M 64
M 66
M 65
M 67
M 68
M 69
M 70
M 71
1972 Methods for Measuring Coating
Thickness by Non-Destructive Testing
1972 Methods for Non- Destructive Testing
of Fusion Welds in Thin Gauge Materials
1973 Amd 1 Methods of Zoning Aircraft and
Referencing Access Doors and Panels
1974 Identification of Aircraft Servicing,
Maintenance, Ground Handling and SafetyHazard Points
1975 Amd 1 Dimensions of Elastomeric
Toroidal Sealing Rings for Aerospace Use:
Inch Series (Replaces M 33: 1970)
1984 Rotary Flexure Testing of Hydraulic
Tubing Joints and Fittings for Aerospace Use
1985 Methods for Determination of Density
and Relative Density of
Polytetrafluoroethylene (PTFE) Tubing for
Aerospace Applications
1985 High Temperature Convoluted Hose
Assemblies in Polytetrafluoroethylene
(PTFE) for Aerospace Applications
1986 Anodic Coating of Titanium and
Titanium Alloys by the Sulphuric Acid
Process
1987 Design and Qualification Testing of
Clamp Blocks for Fluid System Tube Lines
Having Axial Alignment. Metric Series
1987 Dimensions of Omega Clamps (Saddle
Clamps) for Fluid Tubing Installations
1987 Dimensions of 'Q' Clamps (CentreMounted Clamps) for Fluid Systems
1987 Pressure Compensated Variable
Delivery Hydraulic Pumps
1988 Symbols for the Pictorial
Representation of Aircraft Cargo Handling
Systems for Unit Load Devices (ULDs)
1992 Air Cargo Unit Load Devices for
Transportation of Horses (ISO 9469: 1991)
1993 Air Cargo Equipment - Air and
Air/Land Cargo Pallets - Specification and
Testing (ISO 4117: 1993) (S)
1993 Air Cargo Equipment - Base-Restrained
Certified Containers Exclusively for the
Lower Deck of High-Capacity Aircraft (ISO
6517: 1992) (S)
1994 Air Cargo Equipment - Interline Pallets
M 73
M 74
M 75
M 77
M 78
M 79
M 80
M 81
M 82
M 83
M 84
M 85
M 86
M 86
(ISO 4171: 1993) (S)
1994 Aircraft - Self-Propelled LavatoryServicing Vehicle - Functional Requirements
(ISO 9666: 1993) (S)
1994 Air Cargo Equipment - Basic
Requirements for Aircraft Loading
Equipment ISO 6966: 1993 (S)
1994 Aerospace - Aircraft De-Icing/AntiIcing Newtonian Fluids, ISO Type I (ISO
11075: 1993) (S)
1994 Aerospace - Self-Propelled DeIcing/Anti-Icing Vehicles - Functional
Requirements (ISO 11077: 1993) (S)
1995 Aerospace - Aircraft De-Icing/AntiIcing Non-Newtonian Fluids, ISO Type II
(ISO 11078: 1994) (S)
1995 Aircraft Engine Transport Devices (ISO
11241: 1994) (S)
1995 Air Cargo Equipment - Wide Body
Aircraft Main Deck Container/Pallet Loader Functional Requirements (ISO 6967: 1994)
(S)
1995 Air Cargo Equipment - Wide Body
Aircraft Lower Deck Container/ Pallet
Loader - Functional Requirements (ISO
6968: 1994) (S)
1995 Air Cargo Equipment - Interline Pallet
Nets (ISO 4170: 1995) (S)
1995 Glossary for Air Cargo and Ground
Equipment (ISO 10254: 1995) (S)
1995 Air Cargo Equipment - Certified
Aircraft Container for Air Cargo Specification and Testing (ISO 10327: 1995)
(H)
1995 Air Cargo Equipment - Identification of
Double-Stud Tie-Down Fittings Having an
Omnidirectional Rated Load Capacity of 22
250 N (5 000 lbf) or Above (H)
1996 Air Cargo Equipment - Non-Certified
Lower-Deck Containers for Air Transport Specification and Testing (ISO 4118: 1996)
(S)
1996 Amd 1 Air Cargo Equipment - NonCertified Lower-Deck Containers for Air
Transport - Specification and Testing AMD
10841; June 2000; Renumberd as BS ISO
M 87
M 88
M 89
M 90
M 91
N5
N6
S 205
SP 31-32
SP 41-46
SP 49-50
S 148
S 150
S 151
S 152
4118:2000; (S)
1996 Aircraft Ground Support Equipment Catering Vehicle for Large Capacity Aircraft
- Functional Requirements (ISO 10841:
1996) (S)
1996 Air Cargo Equipment - Pressure
Equalization Requirements for Cargo
Containers (ISO 11242: 1996) (S)
1996 Aircraft Ground Support Equipment Stability Requirements for Loading and
Servicing Equipment (ISO 11995: 1996) (S)
1997 Aircraft Ground Support Equipment Self-Propelled Passenger Stairs for Large
Capacity Aircraft - Functional Requirements
ISO 12056: 1996; (S)
1997 Aircraft - Methodology of Calculating
Cargo Compartment Volumes ISO 10046:
1996; (S)
1992 Crew Portable Protective Breathing
Equipment for Use During Aircraft
Emergencies
1998 Specification for Aeromedical Portable
Oxygen Concentrator Systems - General
Requirements (S)
1969 Austenitic Chromium- Nickel Steel
Wire and Springs
1951 Amd 2 Split Taper Pins for
Aeronautical Purposes
1951 Amd 2 Tab Washers for Aircraft
1953 Ball Ends for Swaging on Cable for
Aircraft
(OBSOLESCENT) 1969 Low Nickel
Chromium Steel (Bar for the Manufacture of
Forged Bolts Only) (Replaces BS 2S 103:
1964)
1975 Amd 1 Chromium-MolybdenumVanadium-Niobium Heat- Resisting Steel
Billets, Bars, Forgings and Parts (930-1080
MPa) (Cr 10.5, Mo 0.6, V 0.2, Nb 0.3)
(Replaces BS HR 54: 1970)
1975 Amd 1 Chromium-NickelMolybdenum-Vanadium Heat-Resisting Steel
Billets, Bars, Forgings and Parts (930-1130
MPa: Limiting Ruling Section 150 mm) (Cr
12, Ni 2.5, Mo 1.7, V 0.3)
1975 Amd 1 Chromium-Cobalt-
S 153
S 154
S 155
S 156
S 157
S 158
S 159
S 160
S 161
S 162
Molybdenum-Vanadium- Niobium HeatResisting Steel Billets, Bars, Forgings and
Parts (Consumable Electrode
Remelted)(1000-1140 MPa) (Cr 10.5, Co 6,
Mo 0.8, V 0.2, Nb 0.3)
1976 Amd 1 2 1/2 Percent NickelChromium-Molybdenum Steel Billets, Bars,
Forgings and Parts (1230-1430 MPa:
Limiting Ruling Section 40 mm)
1976 Amd 2 2 1/2 Per Cent NickelChromium- Molybdenum Steel Billets, Bars,
Forging and Parts (880- 1080 MPa: Limiting
Ruling Section 150 mm) (AMD 5676)
October 31, 1988 (Replaces BS 2S 96: 1964)
1976 Nickel-Silicon-ChromiumMolybdenum-Vanadium Steel (Vacuum Arc
Remelted) Billets, Bars, Forgings and Parts
(1900-2100 MPa: Limiting Ruling Section
75mm)
1976 Amd 1 4 Per Cent Nickel- ChromiumMolybdenum Case-Hardening Steel (Vacuum
Arc Remelted) Billets, Bars, Forgings and
Parts (1320-1520 MPa)
1976 Amd 1 3 Per Cent Nickel- ChromiumMolybdenum Case-Hardening Steel Billets,
Bars, Forgings and Parts (1180-1380 MPa)
(Replaces BS 3S 107: 1969)
1977 1 Per Cent Chromium- Molybdenum
Steel Bars for the Manufacture of Forged
Bolts and Forged Nuts
1981 Amd 1 12% Chromium-NickelMolybdenum-Vanadium Heat-Resisting Steel
Bars for the Manufacture of Fasteners (11001300 MPa: Limiting Ruling Section 50 mm)
1990 Chromium-Nickel Corrosion-Resisting
Steel - Bright Bars and Parts (540 MPa,
Limiting Ruling Section 160mm) (Cr18,
Ni10.5, Controlled Nitrogen Content)
1990 Chromium-Nickel- Molybdenum
Corrosion- Resisting Steel Bright Bars and
Parts (540 MPa, Limiting Ruling Section
160mm) (Cr17.5, Ni12.5, Mo2.25,
Controlled Nitrogen Content)
1990 Amd 1 18 Percent Nickel- CobaltMolybdenum Maraging Steel for Forging
Stock, Forgings, Bars and Parts (1800 MPa:
S 163
S 201
S 202
S 203
S 204
S 206
S 524
SP 8
SP 21
S 525
S 526
S 527
G 200
G 203
Double Vacuum Melted) (AMD 6373) July
31, 1991
1990 Nickel-Chromium- MolybdenumVanadium Steel Forging Stock, Forgings
Bars and Parts (1900 MPa: Limiting Ruling
Section 100mm)
1967 Amd 1 Patented Cold Drawn Carbon
Steel Wire and Springs (High Duty
Unground Wire)
1967 Amd 1 Patented Cold Drawn Carbon
Steel Wire and Springs (High Duty Ground
Wire)
1967 Carbon Steel Wire and Springs (High
Duty Unground Wire; Hardened and
Tempered)
1967 Chromium-Vanadium Steel Wire and
Springs (High Duty Ground Wire; Hardened
and Tempered)
1999 Chromium-Nickel-Aluminium
Corrosion Resisting Steel (Precipitation
Hardening) Rod, Cold Drawn Wire and
Springs (S)
(OBSOLESCENT) 1969 Amd 2 Cold-Rolled
18/10 Chromium-Nickel Corrosion-Resisting
Steel Sheet and Strip (Titanium Stabilized:
80 Hbar) (Replaces BS S 520: 1956)
1939 Turnbuckles (Tension Rod Type)
1950 Lubricating Nipples for Aircraft
Purposes
1969 Amd 2 Cold-Rolled 18/10 ChromiumNickel Corrosion-Resisting Steel Sheet and
Strip (Niobium Stabilized: 80 Hbar)
(Replaces BS S 520: 1956)
(OBSOLESCENT) 1969 Amd 1 Softened
18/10 Chromium-Nickel Corrosion-Resisting
Steel Sheet and Strip (Titanium Stabilized:
54 Hbar) (Replaces BS S 521: 1956)
1969 Amd 1 Softened 18/10 ChromiumNickel Corrosion-Resisting Steel Sheet and
Strip (Niobium Stabilized: 54 Hbar)
(Replaces BS S 521: 1956)
(OBSOLESCENT) 1967 Miniature LeverOperated Manual Switches (Replaced by G
224: 1978)
1967 Unified Screws with Captive Facing
and Locking Washers (Partially Replaces G
G 204
G 206
G 208
G 211
G 212
G 240
G 241
G 242
G 222
G 224
G 225
G 226
G 227
G 228
G 234
G 235
G 236
154: 1958)
1967 Amd 1 Copper Terminal Ends for
Crimping to Electric Cables with Copper
Conductors
(OBSOLESCENT) 1969 Fepsil Type Electric
Cables with Copper Conductors
(OBSOLESCENT) 1970 Amd 1 General
Requirements for Electrical Relays up to 10
A Rating
1971 Amd 1 Reflection-Reducing Coating of
Instrument Windows and Lighting Wedges
1971 Amd 8 General Requirements for
Aircraft Electrical Cables AMD 5113;
August 29, 1986; (S)
1988 Pressure Transducers for Use on
Aircraft
1988 Fire Proof Electric Cables for Engine
Fire Zone and Airframe Use
1989 Data Bus Interconnecting Systems
1976 Amd 3 Efglas Type Electric Cables
(Metric Units) (AMD 6188) December 21,
1990 (Replace BS PD 6456: 1970)
(OBSOLESCENT) 1978 Amd 1 LeverOperated Manual Switches for Aircraft
Replaces G 194: 1965 and G 200:1967
(OBSOLESCENT) 1979 Performance of
Environment-Resistant Terminal Junction
Modules with Removable Crimp-Type
Contacts
1979 Counter and Pointer, Servo Type,
Pressure Altimeter Systems
(OBSOLESCENT) 1979 Tersil Type Electric
Cables (Metric Units)
(OBSOLESCENT) 1981 Clearance and
Fixing Dimensions for 2A and 3A, Two- and
Four-Pole Sealed Electromagnetic Relays for
Aircraft
1984 Self-Aligning Air Flow Transmitters for
Use on Aircraft
1987 Electric Cables for General Airframe or
Equipment Interconnect Use (150 Degrees
Celsius) Wrapped Insulation with Silver
Plated Conductors
1987 Electric Cables for General Airframe or
Equipment Interconnect Use (200 Degrees
Celsius), Wrapped Insulation with Nickel
G 237
G 243
G 244
G 246
G 247 PART 1
G 247 PART 2
G 248
G 250
G 253
G 254
G 255
HC 1
HC 4
HC 5
G 256
BS G 257 PART 1
BS G 257 PART 2
G 258
G 258
Plated Conductors
1987 Electric Cables for General Airframe or
Equipment Interconnect Use (200 Degrees
Celsius), Extruded Insulation with Nickel
Plated Conductors
1990 Igniter Cables for Engine Use (4kV
d.c.) (Read in Conjunction with G 230)
1989 Code of Practice for Installation/Repair
of Aircraft Electrical Interconnection
Systems
1991 Cable Ties for Installation Under
Controlled Tension on Aircraft Electric Cable
Harnesses
1992 Locator Lights for Airborne
Applications Part 1: Specification for
Lifejacket Lights
1995 Locator Lights for Airborne
Applications Part 2: Specification for Liferaft
Lights (S)
1993 Hybrid Remote Power Controllers.
General Requirements (ISO 10296: 1992) (S)
1994 Identification Marking of Electric
Cables (ISO 2574: 1994) (S)
1995 Type 3 Terminal Junction Systems
(ISO 8668-3: 1994) (S)
1994 Type 2 Terminal Junction Systems
(ISO 8668-4: 1993) (S)
1994 Type 3 Terminal Junction Systems
(ISO 8668-5: 1992) (S)
(OBSOLESCENT) 1973 Carbon Steel
Castings (500 N/Square mm)
1973 3% Chromium-Molybdenum Steel
Castings (620-770 N/Square mm)
1973 3% Nickel Case-Hardening Steel
Castings (700 N/ Square mm)
1995 Type 4 Terminal Junction Systems
(ISO 8668-6: 1994) (S)
1998 Design of Electromagnetic Hazard
Protection of Civil Aircraft Part 1: Guide to
Theory and Threats (S)
1998 Design of Electromagnetic Hazard
Protection of Civil Aircraft Part 2: Guide to
Protection (S)
1995 Glossary of Terms for Electrical Cables
and Cable Harnesses (ISO 8815: 1994) (S)
1995 Amd 1 Glossary of Terms for Electrical
G 259
G 260
G 261 PART 1
HC 2
HC 3
HC 6
HC 9
HC 10
HC 100
M 22
M 61
HC 103
HC 105
HC 106
HC 205
N4
Cables and Cable Harnesses AMD 10391:
July 1999; ISO 8815: 1994; (S)
1996 Aircraft Equipment - Environmental
and Operating Conditions for Airborne
Equipment - Humidity, Temperature and
Pressure Tests (ISO 9662: 1994) (S)
1996 Environmental Tests for Aircraft
Equipment - Steady-State Acceleration (ISO
2669: 1995) (S)
1996 Aircraft - Electromagnetic Relays and
Contactors Part 1: General Requirements
(ISO 5867-1: 1996) (S)
(OBSOLESCENT) 1973 Carbon-Manganese
Steel Castings(550 N/Square mm)
1973 1% Chromium-Molybdenum Low
Alloy Steel Castings (700 N/Square mm)
1973 3% Chromium-Molybdenum Nitriding
Steel Castings (850-1000 N/Square mm)
1974 Amd 1 Nickel-ChromiumMolybdenum Steel Castings (880-1080 MPa)
1974 Amd 1 Nickel-ChromiumMolybdenum Steel Castings (1150-1300
MPa)
1972 Amd 3 Inspection and Testing
Procedure for Iron, Nickel, Copper, Cobalt
and Refractory Metal Base Alloy Castings
(AMD 6574) May 28, 1991
1949 Silica Gel, Acid Activated for Aircraft
Purposes
1989 Envelope Dimensions of P Clamps
(Loop Clamps) for Fluid Systems
1974 Amd 1 23% Chromium-NickelTungsten Corrosion- Resisting Steel Castings
(Cr 23, Ni 11, W 3)
1974 Amd 1 18% Chromium- 11% Nickel2.5% Molybdenum Niobium-Stabilized
Corrosion-Resisting Steel Castings
1974 Amd 2 Precipitation Hardening
Chromium-Nickel-Copper CorrosionResisting Steel Castings (1250-1500 MPa)
(S) (AMD 5049) May 30, 1986
1974 Amd 1 Precipitation Hardening Nickel
Base Chromium- Cobalt-MolybdenumTitanium Alloy Castings (Cr 20, Co 20, Mo
6, Ti 2)
(OBSOLESCENT) 1974 Full Face Mask
HC 206
HC 202
HC 301
HC 401
HC 402
HC 403
HC 404
HC 502
HR 3
HR 4
HR 5
HR 6
Assemblies for Use in Contaminated
Atmospheres
1975 Amd 1 Precipitation Hardening Nickel
Base Chromium- Cobalt-MolybdenumTitanium Alloy Precision Castings (Cr 20, Co
20, Mo 6, Ti 2)
1973 Amd 1 Precipitation Hardening Nickel
Base Chromium- Niobium-MolybdenumIron- Tungsten Alloy Castings (Cr 20.0, Nb
6.6, Mo 6.0, Fe 3.0, W 2.5) (AMD 3884)
April 30, 1982
1973 Cobalt Base Chromium- NickelTungsten Alloy Castings (Cr 25.5, Ni 105, W
7.5)
1974 18% Nickel Maraging Steel Precision
Castings (1600-1850 MPa)
1977 Cast Iron Ring Pots (Centrifugally
Cast) (Suitable for Piston Rings up to 200
mm in Diameter)
1977 High Chromium Alloy Cast Iron Ring
Pots (Centrifugally Cast) (Suitable for Piston
Rings up to 400 mm in Diameter)
1977 Chromium-Molybdenum Alloy Cast
Iron Ring Pots (Suitable for Centrifugally
Cast and Sand Cast Sealing Rings, Piston
Rings and Cylinder Liners)
1981 Copper Base Aluminium- Nickel-Iron
Alloy Castings (620 MPa) (Al 9.5, Ni 5, Fe
5) (Replaces BS HC 501: 1974)
1972 Nickel-Cobalt-ChromiumMolybdenum-Aluminium- Titanium HeatResisting Alloy Billets, Bars, Forgings and
Parts (Nickel Base Co 20, Cr 14.8, Mo 5, Al
4.7, Ti 1.2)
1972 Amd 2 Nickel-Chromium-CobaltAluminium-Molybdenum- Titanium HeatResisting Alloy Billets, Bars, Forgings and
Parts (Nickel Base, Cr 15, Co 14.2, Al 5, Mo
4, Ti 4)
1972 Amd 1 Nickel-Chromium-Titanium
Heat-Resisting Alloy Billets, Bars Forgings
and Parts (Nickel Base Cr 19.5, TI 0.4)
1972 Amd 1 Nickel-Chromium-IronMolybdenum-Cobalt- Tungsten HeatResisting Alloy Billets, Bars, Forgings and
Parts (Nickel Base, Cr 21.7, Fe 18.5, Mo 9,
HR 10
HR 40
HR 51
HR 52
HR 53
HR 55
HR 203
HR 204
HR 205
HR 206
HR 207
HR 208
Co 1.5, W 0.6)
1972 Amd 1 Nickel-Cobalt-ChromiumMolybdenum-Titanium- Aluminium HeatResisting Alloy Billets, Bars, Forgings and
Parts (Nickel Base, Co 20, Cr 20, Mo 5.9, Ti
2.1, Al 0.5)
1972 Amd 1 Cobalt-Chromium- TungstenNickel- Manganese Heat-Resisting Alloy
Billets, Bars and Forgings(Cobalt Base Cr
20, W 15, Ni 10, Mn 1.5)
1973 Amd 2 Heat-Resisting Alloy Billets,
Bars, Forgings and Parts (Solution Treated at
980 Degrees C) (Ni 25.5, Cr 14.7, Ti 2, Mn
1.5, Mo 1.2, Si 0.7, V 0.3, Fe Remainder)
1973 Amd 2 Heat-Resisting Alloy Billets,
Bars, Forgings and Parts (Ni 25.5, Cr 14.7, Ti
1.8, Mn 1.5, Mo 1.2, V 0.3, Fe Remainder)
1973 Amd 2 Nickel-Iron-ChromiumMolybdenum-Titanium Heat-Resisting Alloy
Billets, Bars, Forgings and Parts (Ni/Co 42.5,
Cr 12.5, Mo 5.8, Ti 3.0, Fe Remainder)
1980 Nickel-Iron-Chromium- MolybdenumAluminium- Titanium Heat-Resisting Alloy
Billets, Bars, Forgings and Parts (Ni/Co 43.5,
Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe
Remainder) (Replaces BS HR 11: 1973)
1972 Amd 2 Nickel-Chromium-Titanium
Heat-Resisting Alloy Plate, Sheet and Strip
(Nickel Base, Cr 19.5, Ti 0.4)
1972 Amd 1 Nickel-Chromium-IronMolybdenum-Cobalt- Tungsten HeatResisting Alloy Plate, Sheet and Strip (Nickel
Base, Cr 22, Fe 18.5, Mo 9, Co 1.5, W 0.6)
(AMD 1809) September 30, 1975
1989 Nickel-Copper Alloy Sheet and Strip:
Annealed (Nickel Base, Cu 31)
1973 Amd 2 Nickel-Cobalt-ChromiumMolybdenum-Titanium- Aluminium HeatResisting Alloy Plate, Sheet and Strip (Nickel
Base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
1973 Amd 1 Nickel-Iron-ChromiumMolybdenum-Aluminium- Titanium HeatResisting Alloy Plate, Sheet and Strip (Ni/Co
43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe
Remainder)
1989 Nickel-Chromium-Iron Alloy Sheet,
HR 209
HR 240
HR 251
HR 402
HR 403
HR 404
HR 505
HR 506
HR 650
L 102
Strip and Plate, Annealed (Nickel Base, Cr
15.5, Fe 8)
1989 Nickel-Chromium-CobaltMolybdenum-Titanium- Aluminium HeatResisting Alloy Sheet, Strip and Plate:
Softened (Nickel Base, Cr 18, Co 14, Mo 7,
Ti 2.2, Al 2.1)
1972 Amd 1 Cobalt-Chromium-Tungsten
Nickel-Manganese Heat- Resisting Alloy
Plate, Sheet and Strip (Cobalt Base Cr 20, W
15, Ni 10, Mn 1.5)
(OBSOLESCENT) 1974 Amd 2 Heat
Resisting Alloy Plate, Sheet, and Strip (Ni
25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3,
Fe Remainder)
1973 Nickel-Chromium-Cobalt- TitaniumAluminium Heat- Resisting Alloy Cold
Worked and Softened Seamless Tubes
(Nickel Base Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
1973 Amd 1 Nickel-Chromium-Titanium
Heat-Resisting Alloy Cold Worked and
Softened Seamless Tubes (Nickel Base Cr
19.5, Ti 0.4)
1973 Amd 2 Nickel-Cobalt-ChromiumMolybdenum-Titanium- Aluminium HeatResisting Alloy Cold Worked Solution
Treated Seamless Tubes (Nickel Base, Co 20,
Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
1981 Nickel-Chromium-Iron- TitaniumNiobium- Aluminium Heat-Resisting Alloy
Round Wire for Thread Inserts
1989 Nickel-Chromium-Cobalt- TitaniumAluminium Heat-Resisting Alloy Wire:
Softened (Nickel Base, Cr 19.5, Co 1.8, Ti
2.5, Al 1.5)
1972 Amd 2 High Expansion Heat- Resisting
Steel Bar and Wire for the Manufacture of
Bolts, Studs, Set Screws and Nuts (Ni 25.5,
Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3)
(Limiting Ruling Section 20 mm)
(OBSOLESCENT) 1971 Bars and Extruded
Sections of Aluminium- Copper-MagnesiumSilicon-Manganese Alloy (Solution Treated
and Aged at Room Temperature) (Not
Exceeding 200 mm Diameter or Minor
Sectional Dimension) (Cu 4.4, Mg 0.5, Si
L 103
L 105
L 109
L 110
L 111
L 112
L 113
L 114
L 115
F 133
F 143
F 125
0.7, Mn 0.8) (Replaces B
(OBSOLESCENT) 1971 Forging Stock and
Forgings of Aluminium- CopperMagnesium- Silicon-Manganese Alloy
(Solution Treated and Aged at Room
Temperature) (Cu 4.4, Mg 0.5, Si 0.7, Mn
0.8) (Replaces BS L 76: 1959)
1971 Tube of Aluminium- CopperMagnesium- Silicon-Manganese Alloy
(Solution Treated and Aged at Room
Temperature) (Not Exceeding 10 mm Wall
Thickness) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
(Replaces BS 2L 62: 1961)
1971 Amd 1 Aluminium-Coated Sheet and
Strip of Aluminium- Copper-MagnesiumManganese Alloy (Solution Treated and
Aged at Room Temperature)
1971 Amd 1 Aluminium-Coated Sheet and
Strip of Aluminium- Copper-MagnesiumManganese Alloy (Supplied for Solution
Treatment by the User)
(OBSOLESCENT) 1971 Bars and Extruded
Sections of Aluminium- MagnesiumManganese Alloy (Solution Treated and
Precipitation Treated) (Replaced by BS EN
2326: 1992)
1971 Forging Stock and Forgings
Aluminium- Magnesium-Silicon- Manganese
Alloy (Solution Treated and Precipitation
Treated)
1971 Sheet and Strip of AluminiumMagnesium- Silicon-Manganese Alloy
(Solution Treated and Precipitation Treated)
1971 Tube of Aluminium- MagnesiumSilicon- Manganese Alloy (Solution Treated
and Precipitation Treated)
1971 Plate of Aluminium- MagnesiumSilicon- Manganese Alloy (Solution Treated,
Controlled Stretched and Precipitation
Treated)
1988 Warp Knitted Nylon Fabric for
Aerospace Purposes
1993 Para-Aramid Braided Cords for
Aerospace Purposes (S)
1973 Amd 2 Rubber Bonded Compressed
Asbestos Fibre Jointing (AMD 5816) January
F 130
L 115
L 117
L 118
F 131
F 132
F 134
F 136
F 137
F 138
F 139
F 140
F 141
31, 1989
1987 Rubber Bonded Compressed Aramid
Fibre Jointing Material for Aerospace
Purposes
1971 Amd 1 Plate of AluminiumMagnesium-Silicon- Manganese Alloy
(Solution Treated, Controlled Stretched and
Precipitation Treated) (Not Exceeding 25 mm
Thickness) (Suitable for Welding) (Mg 0.8,
Si 1, Mn 0.7) (AMD 6844) Nov. 29, 1991
1975 Amd 1 Tube of AluminiumMagnesium-Silicon- Copper- Chromium
Alloy (Solution Treated and Artificially
Aged: Not Tested Hydraulically) (Not
Exceeding 10 mm Thickness) (Mg 1.0, Si
0.6, Cu 0.28, Cr 0.2)
1975 Amd 2 Tube of AluminiumMagnesium-Silicon- Copper-Chromium
Alloy (Solution Treated and Artificially
Aged: Tested Hydraulically) (Not Exceeding
10 mm Thickness) Mg 1.0, Si 0.6, Cu 0.28,
Cr 0.2)
1986 Amd 1 Chlorosulphonated Polyethylene
Rubber Coated Nylon Fabric (300 G/M2) for
Aerospace Purposes (AMD 5795) December
30, 1988
1987 Amd 1 Braided Nylon Cord with
Specified Dimensional Stability for
Aerospace Purposes
1989 Continuous Filament Polyester Sewing
Thread Suitable for Aerospace Purposes
1989 Pigmented Chlorosulphonated
Polyethylene Rubber- Coated Nylon Fabric
(190 g/m Squared) for Aerospace Purposes
1989 Warp Knitted Cotton Polishing and
Polish Application Cloths for Aircraft
Transparencies
1991 Polyester Plain (Bobbin) Netting
Suitable for Aerospace Purposes
1989 Aluminized Polychloroprene RubberCoated Nylon Fabric (350 g/m Squared) for
Aerospace Purposes
1991 Parachute Terms (Replaces BS 185:
Part 12: Section 12: 1972)
1992 Closely Woven Cotton Fabrics (L28
and L34) for Aerospace Purposes
F 141
F 143
F 151
G 118
G 125
G 102
G 122
G 123
SP 66-67
SP 76
PD IEC TS 61231
SP 65
SP 86
G 249
HC 7
HC 8
SP 90
PD 6519 PART 1
PD 6519 PART 1
PD 6519 PART 2
1992 Amd 1 Closely Woven Cotton Fabrics
(L28 and L34) for Aerospace Purposes
(AMD 8207) July 15, 1994 (S)
1993 Amd 1; Para-Aramid Braided Cords for
Aerospace Purposes AMD 10039 July 1998;
(S)
1991 Shuttleless Woven Cotton Webbing for
Aerospace Purposes (Replaces BS 4F 49:
1984)
1949 Aircraft Magnetic Compass, DirectReading
1950 Amd 2 Turn and Slip Indicators for
Aircraft
1971 General Requirements for Rotating
Electrical Machinery (Replaces BS G 100:
1952)
1949 Aircraft Magnetic Compass, Remote
Reading (Gyro-Stabilized)
1949 Aircraft Magnetic Compass, Remote
Reading (Non-Stabilized)
1955 Cable Thimbles for Aircraft
1958 Snap Head Steel Rivets for Aircraft
1999 International Lamp Coding System
(ILCOS) IEC TS 61231: 1999; (F)
1955 Amd 1 Aluminium Alloy Taper Pins for
Aeronautical Purposes (Replaces SP 30 in SP
28, 29 and 30: 1951 Which is Renumbered
SP 28 and 29: 1951)
1959 100 Degree Countersunk Head Steel
Rivets for Aircraft
1993 Solid-State Remote Power Controllers
General Requirements ISO 8816: 1993 (S)
1974 Amd 1 3% Chromium-Molybdenum
Steel Castings (880-1080 Mpa)
1974 Amd 1 3% Chromium-Molybdenum
Steel Castings (1150- 1300 MPa)
1961 Amd 3 Corrosion-Resisting Steel Split
Cotter Pins for Aircraft (Replaces BS SP 9:
1949)
1995 Guide to Effects of Current on Human
Beings and Livestock Part 1: General
Aspects (IEC 479-1: 1994) (N)
1988 Guide to Effects of Current Passing
Through the Human Body Part 1: General
Aspects
1988 Guide to Effects of Current Passing
PD 6519 PART 2
PD 6519-3
PD 6520
PD 6523
PD 6525 PART 1
PD 6525 PART 1
PD 6525 PART 1
PD IEC TR 61010-3-032
PD IEC TR 61010-3-041
PD IEC TR 61010-3-042
Through the Human Body Part 2: Special
Aspects
1988 Amd 1 Guide to Effects of Current on
Human Beings and Livestock Part 2: Special
Aspects Relating to Human Beings (AMD
8649) June 15, 1995 (IEC 479-2: 1987) (N)
1999 Guide to Effects of Current on Human
Beings and Livestock - Part 3: Effects of
Currents Passing Through the Body of
Livestock IEC 60479-3: 1998; (N)
1988 Guide to Fire test Methods for Building
Materials and Elements of Construction
1989 Information on Access to and
Movement Within and Around Buildings and
on Certain Facilities for Disabled People
1990 Elevated Temperature Properties for
Steels for Pressure Purposes Part 1: Stress
Rupture Properties
1990 Amd 1 Elevated Temperature
Properties for Steels for Pressure Purposes
Part 1: Stress Rupture Properties AMD 7977;
February 15, 1994; (V)
1990 Amd 2 Elevated Temperature
Properties for Steels for Pressure Purposes
Part 1: Stress Rupture Properties (AMD
8802) December 15, 1995 (V)
2002 Safety Requirements for Electrical
Equipment for Measurement, Control, and
Laboratory Use - Part 3-032: Conformity
Verification Report for IEC 61010-2032:1994, Particular Requirements for HandHeld Current Clamps for Electrical
Measurement and Test
2002 Safety Requirements for Electrical
Equipment for Measurement, Control, and
Laboratory Use - Part 3-041: Conformity
Verification Report for IEC 61010-2041:1995, Particular Requirements for
Autoclaves Using Steam for the Treatment of
Medical Materials
2002 Safety Requirements for Electrical
Equipment for Measurement, Control, and
Laboratory Use - Part 3-042: Conformity
Verification Report for IEC 61010-2042:1997, Particular Requirements for
Autoclaves and Sterilizers Using Toxic Gas
DD ENV 1991-2-6
DD ENV 1991-3
DD ENV 1991-4
DD ENV 1992- 1-2
DD ENV 1992- 1-3
DD ENV 12977-3
DD ENV 13050
DD ENV 13106
G 142
DD ENV 1992-1-4
DD ENV 1992-1-5
for the Treatment
2000 Eurocode 1 Basis of Design and
Actions on Structures - Part 2.6: Actions on
Structures - Actions During Execution (R)
2000 Eurocode 1: Basis of Design and
Actions on Structures - Part 3: Traffic Loads
on Bridges (Together with United Kingdom
National Application Document) (S)
1996 Eurocode 1: Basis of Design and
Actions on Structures Part 4: Actions in Silos
and Tanks (R)
1996 Eurocode 2: Design of Concrete
Structures Part 1.2: General Rules Structural Fire Design (Together with United
Kingdom National Application Document)
(R)
1996 Eurocode 2: Design of Concrete
Structures Part 1.3: General Rules - Precast
Concrete Elements and Structures (Together
with United Kingdom National Application
Document) (R)
2001 Thermal Solar Systems and
Components - Custom Built Systems - Part 3:
Performance Characterisation of Stores for
Solar Heating Systems (R)
2001 Curtain Walling - Watertightness Laboratory Test under Dynamic Condition of
Air Pressure and Water Spray (R)
2000 Road Transport and Traffic Telematics
- DATEX Traffic and Travel Data Dictionary
(Version 3.1a) (S)
(OBSOLESCENT) 1953 Amd 1 Heavy
Duty,Electro- Magnetically Operated,
Singlepole Circuit- Breakers for Extra-Low
Voltage d.c. Systems in Aircraft
1996 Eurocode 2: Design of Concrete
Structures Part 1.4: General Rules Lightweight Aggregate Concrete with Closed
Structure (Together with United Kingdom
National Application Document) (R)
1996 Eurocode 2: Design of Concrete
Structures Part 1.5: General Rules Structures with Unbonded and External
Prestressing Tendons (Together with United
Kingdom National Application Document)
(R)
DD ENV 1992-1-6
G 152
G 154
G 174
G 175
G 176 PART 1
G 176 PART 2
G 176 PART 3
G 176 PART 4
G 176 PART 5
G 177
G 183
G 184-G188
G 189
G 192
G 194
1996 Eurocode 2: Design of Concrete
Structures Part 1.6: General Rules - Plain
Concrete Structures (Together with United
Kingdom National Application Document)
(R)
1956 A.C. Electrically Operated Artificial
Horizons for Aircraft (Replaces BS G 110:
1949)
(OBSOLESCENT) 1958 Screw with Captive
Washers for Aircraft (Partially Replaced by
G 203: 1967)
1959 Invertors for Secondary Electrical
Supplies for Aircraft
1959 Amd 1 Aircraft Fuel Nozzle Grounding
Plugs and Sockets
(OBSOLESCENT) 1960 Amd 3 Cartridge
Fuses for Aircraft Part 1: General
Requirements
(OBSOLESCENT) 1960 Amd 4 Cartridge
Fuses for Aircraft Part 2: Cartridge Fuses and
Fuse Links (Type A)
(OBSOLESCENT) 1961 Amd 3 Cartridge
Fuses for Aircraft Part 3: Cartridge FuseLinks (Type B)
(OBSOLESCENT) 1962 Amd 1 Cartridge
Fuses for Aircraft Part 4: Cartridge FuseLinks (Type C)
(OBSOLESCENT) 1966 Amd 1 Cartridge
Fuses for Aircraft Part 5: Cartridge FuseLinks (Type D)
(OBSOLESCENT) 1961 Amd 4 Nyvin Type
Electrical Cables for Aircraft (AMD 4674)
July 31, 1985 (Replaces BS E 24: 1957)
1963 Amd 1 Interconnections in Analogue
Data Transmission Systems in Aircraft
(OBSOLESCENT) 1964 Amd 1 Aluminium
Terminal Ends and Inline Connectors for
Hexagonal Crimping to Aircraft Aluminium
Electric Cables
(OBSOLESCENT) 1964 Amd 6 Tersil Type
Electrical Cables for Aircraft (AMD 4673)
July 31, 1985
(OBSOLESCENT) 1965 Efglas Type
Electrical Cables with Copper Conductors for
Aircraft
(OBSOLESCENT) 1965 Amd 1 Lever-
G 195
G 207
G 209
G 217
G 198 PART 5
BS ISO/IEC 15693-3
BS ISO/IEC TR 15942
BS ISO/IEC TR 15846
BS ISO/IEC 15852
BS ISO/IEC 15897
BS ISO/IEC 15802-1
BS ISO/IEC 15802-2
BS ISO/IEC 15802-4
Operated Manual Switches for Aircraft
(Replaces BS G 129: 1950 and BS G 145:
1954)
(OBSOLESCENT) 1966 Minyvin Type
Electric Cables for Aircraft
1969 Aircraft Electrical Circuit Diagrams
1970 Transformer Rectifier Units
1975 General Requirements for Cockpit
Lighting Controllers
1997 Sleeves and Moulded Components for
Aircraft Electric Cables and Equipment
Wires Part 5: Specification for Heat
Shrinkable Moulded Shapes (S)
2001 Identification Cards - Contactless
Integrated Circuit(S) Cards - Vicinity Cards Part 3: Anticollision and Transmission
Protocol (S)
2000 Information Technology Programming Languages - Guide for the Use
of the ADA Programming Language in High
Integrity Systems (S)
1998 Information Technology - Software
Life Cycle Processes - Configuration
Management (S)
1999 Information Technology Programming Languages - M Windowing
API (S)
1999 Information Technology - Procedures
for Registration of Cultural Elements (S)
1995 Information Technology Telecommunications and Information
Exchange Between Systems - Local and
Metropolitan Area Networks - Common
Specifications Part 1: Medium Access
Control (MAC) Service Definition (S)
1995 Information Technology Telecommunications and Information
Exchange Between Systems - Local and
Metropolitan Area Networks - Common
Specifications Part 2: LAN/MAN
Management (S)
1994 Information Technology Telecommunications and Information
Exchange Between Systems - Local and
Metropolitan Area Networks - Common
Specifications - Part 4: System Load Protocol
BS ISO/IEC 15802-5
BS ISO/IEC 16022
BS ISO/IEC 16023
BS ISO/IEC 16388
BS ISO/IEC 16388
BS ISO/IEC 16390
BS ISO/IEC 17799
C6
C3
C 21 PART 1
C 22
BS ISO/IEC 11694-3
BS ISO/IEC 11694-4
(S)
1998 Information Technology Telecommunications and Information
Exchange between Systems - Local and
Metropolitan Area Networks - Common
Specifications - Part 5: Remote Media
Access Control (MAC) Bridging (S)
2000 Information Technology - International
Symbology Specification - Data Matrix (S)
2000 Information Technology - International
Symbology Specification - Maxicode (S)
1999 Automatic Identification and End
Capture - Bar Code Symbology and
Specification - Code 39 (S)
1999 Amd 1 Information Technology Automatic Identification and Data Capture
Techniques - Bar Code Symbology and
Specifications - Code 39 AMD 10835;
February 2000; (S)
1999 Information Technology - Automatic
Identification and Data Capture Techniques Bar Code Symbology Specifications Interleaved 2 of 5 (S)
2000 Information Technology - Code of
Practice for Information Security
Management Supersedes BS 7799-1: 1999;
BS 7799-1: 2000; (S)
1966 Aircraft Engine Nacelle Fire
Extinguisher Doors
(OBSOLESCENT) 1964 Coupling
Dimensions for Aircraft Pressure Re-Oiling
Connection (Rendered Obsolescent by C 19:
1986)
1997 Interface Requirements for Aircraft
Noseleg to Towbar Attachment Fittings Part
1: Transport Aircraft with a Maximum Ramp
Mass over 50 000 kg (110 000 lb) ISO 8267:
1997; (S)
1995 Test Methods for Aircraft Inner Tube
and Tubeless Tyre Valves - Cores and Caps
(ISO 9475: 1994) (S)
1995 Identification Cards - Optical Memory
Cards - Linear Recording Method Part 3:
Optical Properties and Characteristics (S)
2001 Identification Cards - Optical Memory
Cards - Linear Recording Method - Part 4:
BS ISO/IEC 11729
BS ISO/IEC 11730
BS ISO/IEC TR 11735
BS ISO/IEC 11756
BS ISO/IEC 11770-3
BS ISO/IEC 12042
BS ISO/IEC TR 11802-5
BS ISO/IEC ISP 12059-0
BS ISO/IEC ISP 12059-1
BS ISO/IEC ISP 12059-2
BS ISO/IEC ISP 12059-3
BS ISO/IEC ISP 12059-4
Logical Data Structures (S)
1994 Information Technology Programming Languages - Generic Package
of Primitive Functions for Ada (S)
1994 Information Technology Programming Languages - Form Interface
Management System (FIMS) (S)
1996 Information Technology - EXTensions
for Real-Time Ada (S)
1992 Information Technology Programming Languages - MUMPS (S)
1999 Information Technology - Security
Techniques - Key Management - Part 3:
Mechanisms Using Asymmetric Techniques
(S)
1993 Information Technology - Data
Compression for Information Interchange Binary Arithmetic Coding Algorithm (S)
1997 Information Technology Telecommunications and Information
Exchange between Systems - Local and
Metropolitan Area Networks - Technical
Reports and Guidelines - Media Access
Control (MAC) Bridging of Ethernet V2.0 in
Local Area Networks (S)
1995 Information Technology - International
Standardized Profiles - OSI Management Common Information for Management
Functions Part 0: Common Definintions for
Management Function Profiles (S)
1995 Information Technology - International
Standardized Profiles - OSI Management Common Information for Management
Functions Part 1: Object Management (S)
1995 Information Technology - International
Standardized Profiles - OSI Management Common Information for Management
Functions Part 2: State Management (S)
1995 Information Technology - International
Standardized Profiles - OSI Management Common Information for Management
Functions Part 3: Attributes for Representing
Relationships (S)
1995 Information Technology - International
Standardized Profiles - OSI Management Common Information for Management
BS ISO/IEC ISP 12059-5
BS ISO/IEC ISP 12059-6
BS ISO/IEC ISP 12060-8
BS ISO/IEC ISP 12061-1
BS ISO/IEC ISP 12061-1
BS ISO/IEC ISP 12061-2
BS ISO/IEC ISP 12061-2
BS ISO/IEC 12246
BS ISO/IEC TR 12382
BS ISO/IEC TR 12382
Functions Part 4: Alarm Reporting (S)
1995 Information Technology - International
Standardized Profiles - OSI Management Common Information for Management
Functions Part 5: Event Report Management
(S)
1995 Information Technology - International
Standardized Profiles - OSI Management Common Information for Management
Functions Part 6: Log Control (S)
1996 Information Technology - International
Standardized Profiles - OSI Management Management Functions Part 8: AOM253x Summarization Objects (Including Profiles
AOM2531-AOM2539) (S)
1995 Information Technology - Open
Systems Interconnection - International
Standardized Profiles: OSI Distributed
Transaction Processing Part 1: Introduction
to the Transaction Processing Profiles (S)
1995 Amd 1 Information Technology - Open
Systems Interconnection - International
Standardized Profiles: OSI Distributed
Transaction Processing Part 1: Introduction
to the Transaction Processing Profiles AMD
9650; October 1997; Renumered as BS EN
ISP 12061
1995 Information Technology - Open
Systems Interconnection - International
Standardized Profiles: OSI Distributed
Transaction Processing Part 2: Support of
OSI TP APDUs (S)
1995 Amd 1 Information Technology - Open
Systems Interconnection - International
Standardized Profiles: OSI Distributed
Transaction Processing Part 2: Support of
OSI TP APDUs AMD 9651; October 1997;
Renumbered as BS EN ISP 12061-2: 1997;
(S)
1993 Information Technology - 8 mm Wide
Magnetic Tape Cartridge Dual Azimuth
Format for Information Interchange - Helical
Scan Recording (S)
1992 Permuted Index of the Vocabulary of
Information Processing (S)
1989 Permuted Index of the Vocabulary of
BS ISO/IEC 13211-1
BS ISO/IEC ISP 12061-3
BS ISO/IEC ISP 12061-3
BS ISO/IEC ISP 12061-4
BS ISO/IEC ISP 12061-4
BS ISO/IEC ISP 12061-5
BS ISO/IEC ISP 12061-6
BS ISO/IEC ISP 12061-7
Information Processing (S)
1995 Information Technology Programming Languages - Prolog Part 1:
General Core (S)
1995 Information Technology - Open
Systems Interconnection - International
Standardized Profiles: OSI Distributed
Transaction Processing Part 3: Support of
CCR APDUs (S)
1995 Amd 1 Information Technology - Open
Systems Interconnection - International
Standardized Profiles: OSI Distributed
Transaction Processing Part 3: Support of
CCR APDUs AMD 9652; October 1997;
Renumbered as BS EN ISP 12061-3: 1997;
(S)
1995 Information Technology - Open
Systems Interconnection - International
Standardized Profiles: OSI Distributed
Transaction Processing Part 4: Support of
Session, Presentation and ACSE PDUs (S)
1995 Amd 1 Information Technology - Open
Systems Interconnection - International
Standardized Profiles: OSI Distributed
Transaction Processing Part 4: Support of
Session, Presentation and ACSE PDUs AMD
9653; October 1997; Renumbered as BS EN
ISP 12061-4:
1995 Information Technology - Open
Systems Interconnection International
Standardized Profiles: OSI Distributed
Transaction Processing Pt. 5: Application
Supported Transactions - Polarized Control
(ATP11) (Renumbered as BS EN ISP 120615: 1996) (S)
1995 Information Technology - Open
Systems Interconnection - International
Standardized Profiles: OSI Distrubuted
Transaction Processing Part 6: Application
Supported Transactions Shared Control
(ATP12) (Renumbered as BS EN ISP 120616: 1996) (S)
1995 Information Technology - Open
Systems Interconnection - International
Standardized Profiles: OSI Distributed
Transaction Processing Part 7: Provider
BS ISO/IEC ISP 12061-8
BS ISO/IEC ISP 12061-9
BS ISO/IEC ISP 12061-10
BS ISO/IEC ISP 12068-1
BS ISO/IEC 13211-2
BS ISO/IEC 13213
BS ISO/IEC 13235-1
BS ISO/IEC 13236
BS ISO/IEC 13238-3
BS ISO/IEC 12247
Supported Unchained Transactions Polarized Control (ATP21) (Renumbered BS
EN ISP 12061-7:1996)(S)
1995 Information Technology - Open
Systems Interconnection - International
Standardized Profiles: OSI Distributed
Transaction Processing Part 8: Provider
Supported Unchained Transactions - Shared
Control (ATP22) (Renumbered as BS EN
ISP 12061-8: 1996) (S)
1995 Information Technology - Open
Systems Interconnection - International
Standardized Profiles: OSI Distributed
Transaction Processing Part 9: Provider
Supported Chained Transactions - Polarized
Control (ATP31) (Renumbered BS EN ISP
12061-9:1996)(S)
1995 Information Technology - Open
Systems Interconnection - International
Standardized Profiles: OSI Distributed
Transaction Processing Part 10: Provider
Supported Chained Transactions - Shared
Control (ATP 32) (Renumbered as BS EN
ISP 12061-10: 1996) (S
1996 Information Technology - International
Standardized Profile FDI 4 - Directory Data
Definitions - Use of the Directory for OSI TP
Part 1: FDI 41 - Basic Naming and
Addressing (S)
2000 Information Technology Programming Languages - Prolog Part 2:
Modules (S)
1994 Information Technology Microprocessor Systems - Control and Status
Registers (CSR) Architecture for
Microcomputer Buses (S)
1998 Information Technology - Open
Distributed Processing - Trading Function:
Specification (S)
1998 Information Technology - Quality of
Service: Framework (S)
1998 Information Technology - Data
Management - Part 3: IRDS Export/Import
Facility (S)
1993 Information Technology - 3,81 mm
Wide Magnetic Tape Cartridge for
BS ISO/IEC 12248
BS ISO/IEC 13210
BS ISO/IEC TR 13233
BS ISO/IEC 13235-3
BS ISO/IEC TR 13243
BS ISO/IEC 13248-1
BS ISO/IEC 13248-2
BS ISO/IEC 13248-3
BS ISO/IEC 13248-4
Information Interchange - Helical Scan
Recording - DDS Format Using 60 m and 90
m Length Tapes (S)
1993 Information Technology - 3,81 mm
Wide Magnetic Tape Cartridge for
Information Interchange - Helical Scan
Recording - DATA/DAT-DC Format Using
60 m and 90 m Length Tapes (S)
1999 Information Technology Requirements and Guidelines for Test
Methods Specifications and Test Method
Implementation for Measuring Conformance
to POSIX Standards (S)
1995 Information Technology - Interpretation
of Accreditation Requirements in ISO/IEC
Guide 25 - Accreditation of Information
Technology and Telecommunications Testing
Laboratories for Software and Protocol
Testing Services (S)
1998 Information Technology - Open
Distributed Processing - Trading Function Part 3: Provision of Trading Function Using
OSI Directory Service (S)
1999 Information Technology - Quality of
Service - Guide to Methods and Mechanisms
(S)
1998 Information Technology - Open
Systems Interconnection - Part 1: The
Directory: Protocol Implementation
Conformance Statement (PICS) Proforma for
the Directory Access Protocol (S)
1998 Information Technology - Open
Systems Interconnection - Part 2: The
Directory: Protocol Implementation
Conformance Statement (PICS) Proforma for
the Directory System Protocol (S)
1998 Information Technology - Open
Systems Interconnection - the Directory:
Protocol Implementation Conformance
Statement (PICS) Proforma for the Directory
Operational Binding Management Protocol
(S)
1998 Information Technology - Open
Systems Interconnection - Part 4: The
Directory: Protocol Implementation
Conformance Statement (PICS) Proforma for
BS ISO/IEC 13249-1
BS ISO/IEC 13249-2
BS ISO/IEC 13249-3
BS ISO/IEC 13249-5
BS ISO/IEC TR 13335-2
BS ISO/IEC TR 13335-5
BS ISO/IEC 13421
BS ISO/IEC 13422
BS ISO/IEC 13481
BS ISO/IEC 13522-1
BS ISO/IEC 13522-3
BS ISO/IEC 13522-4
BS ISO/IEC 13522-5
the Directory Information Shadowing
Protocol (S)
2000 Information Technology - Database
Languages - SQL - Multimedia Application
Packages - Part 1: Framework (S)
2000 Information Technology - Database
Languages - SQL Multimedia and
Application Packages - Part 2: Full-Text (S)
1999 Information Technology - Database
Languages - SQL - Multimedia Application
Packages - Part 3: Spatial (S)
2001 Information Technology - Database
Languages - SQL Multimedia and
Application Packages - Part 5: Still Image (S)
1997 Information Technology - Guidelines
for the Management of IT Security - Part 2:
Managing and Planning IT Security (S)
2001 Information Technology - Guidelines
for the Management of IT Security - Part 5:
Management Guideance on Network Security
(S)
1993 Information Technology - Data
Interchange on 12, 7 mm, 48-Track Magnetic
Tape Cartridges - DLT 1 Format (S)
1994 Information Technology - Data
Interchange on 90 mm Flexible Disk
Cartridges 10 MByte Capacity Using Sector
Servo Tracking ISO Type 304 (S)
1993 Information Technology - Data
Interchange on 130 mm Optical Disk
Cartridges - Capacity: 1 Gigabyte per
Cartridge (S)
1997 Information Technology - Coding of
Multimedia and Hypermedia Part 1: MHEG
Object Representation - Base Notation
(ASN.1) (S)
1997 Information Technology - Codingof
Multimedia and Hypermedia Information
Part 3: MHEG Script Interchange
Representation (S)
1996 Information Technology - Coding of
Multimedia and Hypermedia Information
Part 4: MHEG Registration Procedure (S)
1997 Information Technology - Coding of
Multimedia and Hypermedia Information
Part 5: Support for Base-Level Interactive
BS ISO/IEC 13522-6
BS ISO/IEC 13522-8
BS ISO/IEC 13549
BS ISO/IEC TR 13561
BS ISO/IEC 13575
BS ISO/IEC 13650-2
BS ISO/IEC 13714
BS ISO/IEC 13751
BS ISO/IEC 13813
BS ISO/IEC 13816
BS ISO/IEC 13817-1
Applications (S)
1998 Information Technology - Coding of
Multimedia and Hypermedia Information Part 6: Support for Enhanced Interactive
Applications (S)
2001 Information Technology - Coding of
Multimedia and Hypermedia Information Part 8: XML Notation for ISO/IEC 13522-5
(S)
1993 Information Technology - Data
Interchange on 130 mm Optical Disk
Cartridges - Capacity: 1,3 Gigabytes per
Cartridge (S)
1994 Information Technology - Guidelines
for Effective Use of Optical Disk Cartridges
Conforming to ISO/IEC 10090 (S)
1995 Information Technology Telecommunications and Information
Exchange Between Systems - 50-Pole
Interface Connector Mateability Dimensions
and Contact Number Assignments (S)
1997 Information Technology - Open
Systems Interconnection - Conformance Test
Suite for the OSI TP Protocol Part 2: Test
Management Protocol Specification (S)
1995 Information Technology - Document
Processing and Related Communication User Interface to Telephone-Based Services Voice Messaging Applications (S)
2001 Corr 1 Information Technology Programming Languages, Their
Environments and System Software
Interfaces - Programming Language
Extended APL CORR 13320:September
2001; (S)
1998 Information Technology Programming Languages - Generic Packages
of Real and Complex Type Declarations and
Basic Operations for Ada (Including Vector
and Matrix Types) (S)
1997 Information Technology Programming Languages, Their
Environments and System Software
Interfaces - Programming Languages ISLISP
(S)
1996 Information Technology -
BS ISO/IEC 13818-1
BS ISO/IEC 13818-3
BS ISO/IEC TR 13818-5
BS ISO/IEC 13886
BS ISO/IEC 13962
BS ISO/IEC 13863
BS ISO/IEC 13865
BS ISO/IEC 13871
BS ISO/IEC 13874
Programming Languages, Their
Environments and System Software
Interfaces - Vienna Development Method Specification Language Part 1: Base
Language (S)
1996 Information Technology - Generic
Coding of Moving Pictures and Associated
Audio Information Part 1: Systems
Renumbered as BS EN ISO/IEC 13818-1:
1997; (S)
1995 Information Technology - Generic
Coding of Moving Pictures and Associated
Audio Information Part 3: Audio
Renumbered as BS EN ISO/IEC 13818-3:
1996; (S)
1997 Information Technology - Generic
Coding of Moving Pictures and Associated
Audio Information Part 5: Software
Simulation (S)
1996 Information Technology - Language
Independent Procedure Calling (LIPC) (S)
1995 Information Technology - Data
Interchange on 12,7 mm, 112-Track
Magnetic Tape Cartridges - DLT 2 Format
(S)
1998 Information Technology Telecommunications and Information
Exchange between Systems - Private
Integrated Services Network - Specification,
Functional Model and Information Flows Path Replacement Additional Network
Feature (S)
1995 Information Technology Telecommunications and Information
Exchange Between Systems - Private
Integrated Services Network - Specification,
Functional Model and Information Flows Call Transfer Supplementary Service (S)
1995 Information Technology Telecommunications and Information
Exchange between Systems - Private
Telecommunications Networks - Digital
Channel Aggregation (S)
1999 Information Technology Telecommunications and Information
Exchange between Systems - Private
BS ISO/IEC 13923
BS ISO/IEC 13963
BS ISO/IEC TR 14252
BS ISO/IEC TR 14369
BS ISO/IEC 14392
BS ISO/IEC 14393
BS ISO/IEC 14394
BS ISO/IEC 14395
BS ISO/IEC 14443-1
BS ISO/IEC 14443-2
BS ISO/IEC 14443-3
BS ISO/IEC 14443-4
Integrated Services Network - InterExchange Signalling Protocol - Path
Replacement Additional Network Feature (S)
1996 Information Technology - 3,81 mm
Wide Magnetic Tape Cartridge for
Information Interchange - Helical Scan
Recording - DDS-2 Format Using 120 m
Length Tape (S)
1995 Information Technology - Data
Interchange on 90 mm Optical Disk
Cartridges - Capacity: 230 Megabytes per
Cartridge (S)
1996 Information Technology - Guide to the
POSIX Open System Environment (OSE) (S)
1999 Information Technology Programming Languages, Their
Environments and System Software
Interfaces - Guidelines for the Preparation of
Language-Independent Service Specifications
(LISS) (S)
1996 Information Technology - Directory
Services - Application Program Interface
(API) (Language Independent) (S)
1996 Information Technology - Test Methods
for Measuring Conformance to Directory
Services - Application Program Interface
(API) (Language Independent) (S)
1996 Information Technology - Directory
Services C Language Interfaces - Binding for
Application Program Interface (API) (S)
1996 Information Technology - Test Methods
for Measuring Conformance to Directory
Services C Language Interfaces - Binding for
Application Program Interface (API) (S)
2000 Identification Cards - Contactless
Intergrated Circuit(s) Cards - Proximity
Cards - Part 1: Physical Characteristics (S)
2001 Identification Cards - Contactless
Integrated Circuit(s) Cards - Proximity Cards
- Part 2: Radio Frequency Power and Signal
Interface (S)
2001 Identification Cards - Contactless
Intergrated Circuit(s) Cards - Proximity
Cards - Part 3: Initialization and Anticollision
(S)
2001 Identification Cards - Contactless
BS ISO/IEC TR 14471
BS ISO/IEC 14517
BS ISO/IEC 14519
BS ISO/IEC 14478-2
BS ISO/IEC 14515-1
BS ISO/IEC 14568
BS ISO/IEC 14598-1
BS ISO/IEC 14598-2
BS ISO/IEC 14598-4
BS ISO/IEC 14598-5
BS ISO/IEC 14598-6
BS ISO/IEC 14608-1
BS ISO/IEC 14608-2
Intergrated Circuit(s) Cards - Proximity
Cards - Part 4: Transmission Protocol (S)
1999 Information Technology - Software
Engineering - Guidelines for the Adoption of
CASE Tools (S)
1996 Information Technology - 130 mm
Optical Disk Cartridges for Information
Interchange - Capacity: 2,6 Gbytes per
Cartridge (S)
2001 Information Technology - POSIX Ada
Language Interfaces - Binding for System
Application Program Interface (API) (S)
1998 Information Technology - Computer
Graphics and Image Processing Presentation Environment for Multimedia
Objects (PREMO) - Part 2: Foundation
Component Corrected and Reprinted
09/15/2000; (S)
2000 Information Technology - Portable
Operating Systems Interface (POSIX) - Test
Methods for Measuring Conformance to
POSIX - Part 1: System Interfaces (S)
1997 Information Technology - DXL:
Diagram eXchange Language for TreeStructured Charts (S)
1999 Information Technology - Software
Product Evaluation - Part 1: General
Overview (S)
2000 Information Technology - Software
Product Evaluation - Part 2: Planning and
Management (S)
1999 Software Engineering - Product
Evaluation - Part 4: Process for Acquirers (S)
1998 Information Technology - Software
Product Evaluation - Part 5: Process for
Evaluators (S)
2001 Software Engineering - Product
Evaluation - Part 6: Documentation of
Evaluation Modules (S)
1997 Information Technology - Open
Systems Interconnection - The Directory:
Directory Access Protocol - Protocol
Implementation Conformance Statement
(PICS) Proforma (S)
1997 Information Technology - Open
Systems Interconnection - The Directory:
BS ISO/IEC 14709-1
BS ISO/IEC 14752
BS ISO/IEC 14764
BS ISO/IEC 14882
BS ISO/IEC 15434
BS ISO/IEC 14753
BS ISO/IEC 14755
BS ISO/IEC TR 15271
BS ISO/IEC ISP 15287-2
BS ISO/IEC TR 15285
BS ISO/IEC TR 15294
BS ISO/IEC 15408-1
BS ISO/IEC 15408-2
BS ISO/IEC 15408-3
Directory System Protocol - Protocol
Implementation Conformance Statement
(PICS) Proforma (S)
1997 Information Technology Configuration of Customer Premises Cabling
(CPC) for Applications Part 1: ISDN Basic
Access (S)
2000 Information Technology - Open
Distributed Processing - Protocol Support for
Computational Interactions (S)
1999 Information Technology - Software
Maintenance (S)
1998 Programming Languages - C++ (S)
1999 Information Technology - Transfer
Syntax for High Capacity ADC Media (S)
1999 Information Technology - Open
Distributed Processing - Interface References
and Binding (S)
1997 Information Technology - Input
Methods to Enter Characters from the
Repertoire of ISO/IEC 10646 with a
Keyboard or Other Input Device (S)
1998 Information Technology - Guide for
ISO/IEC 12207 (Software Life Cycle
Processes) (S)
2000 Information Technology - Standardized
Application Environment Profile - Part 2:
Posix Realtime Application Support (AEP)
(S)
1998 Information Technology - An
Operational Model for Characters and Glyphs
(S)
2000 Information Technology - Methods for
Data Flow Control at Synchronous and
Asynchronous DTE-DCE Interfaces (S)
1999 Information Technology - Security
Techniques - Evaluation Criteria for IT
Security - Part 1: Introduction and General
Model (S)
1999 Information Technology - Security
Techniques - Evaluation Criteria for IT
Security - Part 2: Security Functional
Requirements (S)
1999 Information Technology - Security
Techniques - Evaluation Criteria for IT
Security - Part 3: Security Assurance
BS ISO/IEC TR 15410
BS ISO/IEC 15417
BS ISO/IEC 15418
BS ISO/IEC 15424
BS ISO/IEC 15426-1
BS ISO/IEC 15457-1
BS ISO/IEC 15457-2
BS ISO/IEC 15459-1
BS ISO/IEC 15459-2
BS ISO/IEC TR 15504-1
BS ISO/IEC 15910
BS ISO/IEC TR 15504-5
BS ISO/IEC TR 15580
BS ISO/IEC TR 15581
BS ISO/IEC 15693-1
Requirements (S)
1998 Information Technology Telecommunications and Information
Exchange between Systems - PISN MobilityGeneral Principles and Services Aspects (S)
2000 Information Technology - Automatic
Identification and Data Capture Techniques Bar Code Symbology Specification - Code
128 (S)
1999 Information Technology - EAN/UCC
Application Identifiers and Fact Data
Identifiers and Maintenance (S)
2000 Information Technology - Automatic
Identification and Data Capture Techniques Data Carrier Identifiers (Including
Symbology Identifiers) (S)
2000 Information Technology - Automatic
Identification and Data Capture Techniques Bar Code Verifier Conformance
Specifications - Part 1: Linear Symbols (S)
2001 Identification Cards - Thin Flexible
Cards - Part 1: Physical Characteristics (S)
2001 Identification Cards - Thin Flexible
Cards - Part 2: Magnetic Recording
Techniques (S)
1999 Information Technology - Unique
Identification of Transport Units - Part 1:
General (S)
1999 Information Technology - Unique
Identification of Transport Units - Part 2:
Registration Procedures (S)
1998 Information Technology - Software
Process Assessment - Part 1: Concepts and
Introductory Guide (S)
1999 Information Technology - Software
User Documentation Process (S)
1999 Information Technology - Software
Process Assessment - Part 5: An Assessment
Model and Indicator Guidance (S)
2001 Information Technology Programming Languages - Fortran - FloatingPoint Exception Handling (S)
2001 Information Technology Programming Languages - Fortran Enhanced Data Type Facilities (S)
2000 Identification Cards - Contactless
BS ISO/IEC 15693-2
BS ISO/IEC ISP 10612-3
BS ISO/IEC ISP 10612-4
BS ISO/IEC ISP 10612-5
BS ISO/IEC 10732
BS ISO/IEC 10733
BS ISO/IEC 10736
BS ISO/IEC ISP 10612-5
BS ISO/IEC ISP 10612-6
BS ISO/IEC ISP 10612-6
Integrated Circuits(s) Cards - Vicinity Cards
- Part 1: Physical Characteristics (S)
2000 Identification Cards - Contactless
Integrated Circuit(s) Cards - Vicinity Cards Part 2: Air Interface and Initialization (S)
1995 Information Technology - International
Standardized Profile RD - Relaying the MAC
Service Using Transparent Bridging Part 3:
Token Ring LAN Subnetwork-Dependent,
Media-Dependent Requirements (S)
1995 Information Technology - International
Standardized Profile RD - Relaying the MAC
Service Using Transparent Bridging Part 4:
Profile RD51.51 (CSMA/CD LAN CSMA/CD LAN) (S)
1995 Information Technology - International
Standardized Profile RD - Relaying the MAC
Service Using Transparent Bridging Part 5:
Profile RD51.54 (CSMA/CD LAN - FDDI
LAN) (S)
1993 Information Technology - Use of X.25
Packet Layer Protocol to Provide the OSI
Connection-Mode Network Service over the
Telephone Network (S)
1998 Information Technology - Elements of
Management Information Related to the OSI
Network Layer (S)
1995 Information Technology Telecommunications and Information
Exchange Between Systems - Transport
Layer Security Protocol (S)
1995 Amd 1 Information Technology International Standardized Profile RD Relaying the MAC Service Using
Transparent Bridging Part 5: Profile RD51.54
(CSMA/CD LAN - FDDI LAN) AMD
9561;July 15, 1997; Renumbered as BS EN
ISP 10612-5:1997 (S)
1995 Information Technology - International
Standardized Profile RD - Relaying the MAC
Service Using Transparent Bridging Part 6:
Profile RD54.54 (FDDI LAN - FDDI LAN)
(S)
1995 Amd 1 Information Technology International Standardized Profile RD Relaying the MAC Service Using
BS ISO/IEC ISP 10612-7
BS ISO/IEC ISP 10612-7
BS ISO/IEC ISP 10612-8
BS ISO/IEC ISP 10612-8
BS ISO/IEC ISP 10612-9
BS ISO/IEC ISP 10612-9
BS ISO/IEC ISP 10613-1
Transparent Bridging Part 6: Profile RD54.54
(FDDI LAN - FDDI LAN) AMD 9562;July
15, 1997; Renumbered as BS EN ISP 106126:1997;(S)
1995 Information Technology - International
Standardized Profile RD - Relaying the MAC
Service Using Transparent Bridging Part 7:
Profile RD51.53 (CSMA/CD LAN - Token
Ring LAN) (S)
1995 Amd 1 Information Technology International Standardized Profile RD Relaying the MAC Service Using
Transparent Bridging Part 7: Profile RD51.53
(CSMA/CD LAN - Token Ring LAN) AMD
9563;July 15, 1997; Renumbered as BS EN
ISP 10612-7:1997 (S)
1995 Information Technology - International
Standardized Profile RD - Relaying the MAC
Service Using Transparent Bridging Part 8:
Profile RD53.53 (Token Ring LAN - Token
Ring LAN) (S)
1995 Amd 1 Information Technology International Standardized Profile RD Relaying the MAC Service Using
Transparent Bridging Part 8: Profile RD53.53
(Token Ring LAN - Token Ring LAN) AMD
9564;July 15, 1997; Renumbered as BS EN
ISP 10612-8:1997 (S)
1995 Information Technology - International
Standardized Profile RD - Relaying the MAC
Service Using Transparent Bridging Part 9:
Profile RD53.54 (Token Ring LAN - FIDDI
LAN) (S)
1995 Amd 1 Information Technology International Standardized Profile RD Relaying the MAC Service Using
Transparent Bridging Part 9: Profile RD53.54
(Token Ring LAN - FIDDI LAN) AMD
9565;July 15, 1997; Renumbered as BS EN
ISP 10612-9:1997;(S)
1994 Information Technology - International
Standardized Profile RA - Relaying the
Connectionless-Mode Network Service - Part
1: Subnetwork- Independent Requirements
Renumbered as BS EN ISP 10613-1: 1997;
(S)
BS ISO/IEC ISP 10613-2
BS ISO/IEC ISP 10613-3
BS ISO/IEC 10737
BS ISO/IEC 10744
BS ISO/IEC 10745
BS ISO/IEC 10746-1
BS ISO/IEC ISP 10613-4
BS ISO/IEC ISP 10613-4
BS ISO/IEC ISP 10613-5
BS ISO/IEC ISP 10613-6
1994 Information Technology - International
Standardized Profile RA - Relaying the
Connectionless-Mode Network Service - Part
2: LAN Subnetwork-Dependent, Media
Independent Requirements Renumbered as
BS EN ISP 10613-2: 1997; (S)
1994 Information Technology - International
Standardized Profile RA - Relaying the
Connectionless-Mode Network Service - Part
3: CSMA/CD LAN Subnetwork-Dependent,
Media-Dependent Requirements Renumbered
as BS EN ISP 10613-3:1997; (S)
1998 Information Technology - Elements of
Management Information Related to the OSI
Transport Layer (S)
1997 Information Technology Hypermedia/Time-Based Structuring
Language (HyTime) (S)
1995 Information Technology - Open
Systems Interconnection - Upper Layers
Security Model (S)
1998 Information Technology - Open
Distributed Processing - Reference Model:
Overview (S)
1995 Information Technology - International
Standardized Profile RA - Relaying the
Connectionless-Mode Network Service Part
4: FDDI LAN Subnetwork-Dependent,
Media-Dependent Requirements (S)
1995 Amd 1 Information Technology International Standardized Profile RA Relaying the Connectionless-Mode Network
Service Part 4: FDDI LAN SubnetworkDependent, Media-Dependent Requirements
Renumbered as BS EN ISP 10613-4: 1997;
AMD 9571; August, 1997;
1994 Information Technology - International
Standardized Profile RA - Relaying the
Connectionless-Mode Network Service - Part
5: Definition of Profile RA51.51, Relaying
the Connectionless-Mode Network Service
Between CSMS/CD LAN Subnetworks
Renumbered as
1995 Information Technology - International
Standardized Profile RA - Relaying the
Connectionless-Mode Network Service - Part
BS ISO/IEC TR 10738
BS ISO/IEC 10739-1
BS ISO/IEC 10746-2
BS ISO/IEC 10746-3
BS ISO/IEC 10777
BS ISO/IEC 10857
BS ISO/IEC 10861
BS ISO/IEC 10885
BS ISO/IEC 10918-1
BS ISO/IEC 10918-2
BS ISO/IEC 10918-4
6: Definition of Profile RA51.54, Relaying
the Connectionless-Mode Network Service
between CSMA/CD LAN Subnetworks and
FDDI LAN S
(OBSOLETE) 1993 Information Technology
- Local and Metropolitan Area Networks Token Ring Access Method and Physical
Layer Specifications - Recommended
Practice for Use of Unshielded Twisted Pair
Cable (UTP) for Token Ring Data
Transmission at 4 Mbit/s (
1994 Information Technology - Open
Systems Interconnection - Conformance Test
Suite for ISO 9041-1 - Virtual Terminal
Basic Class Protocol Part 1: Test Suite
Structure and Test Purposes (S)
1996 Information Technology - Open
Distributed Processing - Reference Model:
Foundations (S)
1996 Information Technology - Open
Distributed Processing - Reference Model:
Architecture (S)
1991 Information Technology - 3,81 mm
Wide Magnetic Tape Cartridge for
Information Interchange - Helical Scan
Recording - DDS Format
1994 Information Technology Microprocessor Systems - Futurebus+ Logical Protocol Specification (S)
1994 Information Technology Microprocessor Systems - High-Performance
Synchronous 32-Bit Bus: MULTIBUS II (S)
1993 Information Technology - 356 mm
Optical Disk Cartridge for Information
Interchange - Write Once (S)
1994 Information Technology - Digital
Compression and Coding of ContinuousTone Still Images: Requirements and
Guidelines (S)
1995 Information Technology - Digital
Compression and Coding of ContinuousTone Still Images Part 2: Compliance Testing
(S)
1999 Information Technology - Digital
Compression and Coding of ContinuousTone Still Images - Part 4: Registration of
BS ISO/IEC 10967-1
BS ISO/IEC 10967-2
BS ISO/IEC 11072
BS ISO/IEC 10994
BS ISO/IEC 11159
BS ISO/IEC 11172-1
BS ISO/IEC 11172-2
BS ISO/IEC 11172-3
BS ISO/IEC 11172-4
BS ISO/IEC 11179-3
JPEG Profiles, SPIFF Profiles, SPIFF Tags,
SPIFF Colour Spaces, APPn Markers, SPIFF
Compression Types, and Registration
Authorities (REG
1994 Information Technology - Language
Independent Arithmetic - Part 1: Integer and
Floating Point Arithmetic (S)
2001 Information Technology - Language
Independent Arithmetic - Part 2: Elementary
Numerical Functions (S)
1992 Information Technology - Computer
Graphics - Computer Graphics Reference
Model
1992 Information Technology - Data
Interchange on 90 mm Flexible Disk
Cartridges Using Modified Frequency
Modulation Recording at 31 831 ftprad on 80
Tracks on Each Side - ISO Type 303
1992 Information Technology - Office
Equipment - Minimum Information to Be
Included in Specification Sheets - Copying
Machines (S)
1993 Information Technology - Coding of
Moving Pictures and Associated Audio for
Digital Storage Media at up to About 1,5
Mbit/s - Part 1: Systems (Formerly BS
ISO/IEC 11172-1: 1993) (S)
1993 Information Technology - Coding of
Moving Pictures and Associated Audio for
Digital Storage Media at up to About 1,5
Mbit/s - Part 2: Video (Renumbered as BS
EN ISO/IEC 11172-2 : 1995) (S)
1993 Information Technology - Coding of
Moving Pictures and Associated Audio for
Digital Storage Media at up to About 1,5
Mbit/s - Part 3: Audio (Renumbered as BS
EN ISO/IEC 11172-3 : 1995) (S)
1995 Information Technology - Coding of
Moving Pictures and Associated Audio for
Digital Storage Media at up to About 1,5
Mbit/s Part 4: Compliance Testing
Renumbered as BS EN ISO/IEC 11172-4:
1997
1994 Information Technology - Specification
and Standardization of Data Elements Part 3:
Basic Attributes of Date Elements (S)
BS ISO/IEC ISP 11183-1
BS ISO/IEC ISP 11183-2
BS ISO/IEC ISP 11183-3
BS ISO/IEC ISP 11183-3
BS ISO/IEC ISP 11184-1
BS ISO/IEC ISP 11184-2
BS ISO/IEC ISP 11184-3
BS ISO/IEC 11319
BS ISO/IEC 11321
1992 Information Technology - International
Standardized Profiles AOM1n OSI
Management - Management Communications
- Part 1: Specification of ACSE, Presentation
and Session Protocols for the Use by ROSE
and CMISE
1992 Information Technology - International
Standardized Profiles AOM1n OSI
Management - Management Communications
- Part 2: CMISE/ROSE for AOM12 Enchanced Management Communications
(Renumbered as BS EN ISP 11183-2: 1995)
1992 Information Technology - International
Standardized Profiles AOM1n OSI
Management - Management Communications
- Part 3: CMISE/ROSE for AOM11 - Basic
Management Communications
1992 Amd 0 Information Technology International Standardized Profiles AOM1n
OSI Management - Management
Communications - Part 3: CMISE/ROSE for
AOM11 - Basic Management
Communications (AMD 7900) August 15,
1993 (S)
1995 Information Technology - International
Standardized Profiles FVT1nn - Virtual
Terminal Basic Class - Register of VTEProfiles Part 1: FVT121, FVT122 - S-Mode
Forms and Paged VTE-Profiles (S)
1996 Information Technology - International
Standardized Profiles FVT1nn - Virtual
Terminal Basic Class - Register of VTEProfiles Part 2: FVT115 - FVT122 A-Mode
Generalized Telnet VTE-Profile (S)
1996 Information Technology - International
Standardized Profiles FVT1nn - Virtual
Terminal Basic Class - Register of VTEProfiles; Part 3: FVT114 - A-Mode
Transparent VTE-Profile (S)
1993 Information Technology - 8 mm Wide
Magnetic Tape Cartridge for Information
Interchange - Helical Scan Recording (S)
1992 Information Technology - 3,81 mm
Wide Magnetic Tape Cartridge for
Information Interchange - Helical Scan
Recording - DATA/DAT Format (S)
BS ISO/IEC 11404
BS ISO/IEC ISP 11185-3
BS ISO/IEC ISP 11185-4
BS ISO/IEC ISP 11185-5
BS ISO/IEC ISP 11185-6
BS ISO/IEC ISP 11185-7
BS ISO/IEC ISP 11185-8
BS ISO/IEC ISP 11185-9
1996 Information Technology Programming Languages, Their
Environments and System Software
Interfaces - Language-Independent Datatypes
(S)
1994 Information Technology - International
Standardized Profiles FVT2nn - Virtual
Terminal Basic Class - Register of Control
Object Type Definitions - Part 3: FVT215,
FVT216 - Application RIO Record Loading
Control Object, Terminal RIO Record
Notificatio
1994 Information Technology - International
Standardized Profiles FVT2nn - Virtual
Terminal Basic Class - Register of Control
Object Type Definitions - Part 4: FVT217 Horizontal Tabulation Control Object
Renumbered as BS EN ISP 11185-4: 1996;
(S)
1994 Information Technology - International
Standardized Profiles FVT2nn - Virtual
Terminal Basic Class - Register of Control
Object Type Definitions Part 5: FVT218 Logical Image Control Object (Renumbered
as BS EN ISP 11185-5:1995) (S)
1994 Information Technology - International
Standardized Profiles FVT2nn - Virtual
Terminal Basic Class - Register of Control
Object Type Definitions Part 6: FVT219 Status Message Control Object (Renumbered
as BS EN ISP 11185-6:1996) (S)
1994 Information Technology - International
Standardized Profiles FVT2nn - Virtual
Terminal Basic Class - Register of Control
Object Type Definitions - Part 7: FVT2110 Entry-Control Control Object (Renumbered
as BS EN ISO 11185-7:1996) (S)
1994 Information Technology - International
Standardized Profiles FVT2nn - Virtual
Terminal Basic Class - Register of Control
Object Type Definitions - Part 8: FVT221 Forms FEICO (Field Entry Instruction
Control Object) No. 1 Renumbered as BS EN
ISP 111
1994 Information Technology - International
Standardized Profiles FVT2nn - Virtual
BS ISO/IEC ISP 11185-10
BS ISO/IEC ISP11185-11
BS ISO/IEC ISP 11185-13
BS ISO/IEC 11411
BS ISO/IEC 11430
BS ISO/IEC 11558
BS ISO/IEC ISP 11185-12
BS ISO/IEC ISP 11185-14
Terminal Basic Class - Register of Control
Object Type Definitions - Part 9: FVT222 Page FEICO (Field Entry Instruction Control
Object) No. 1 Renumbered as BS EN ISP
1118
1994 Information Technology - International
Standardized Profiles FVT2nn - Virtual
Terminal Basic Class - Register of Control
Object Type Definitions - Part 10: FVT231 Forms FEPCO (Field Entry Pilot Control
Object) No. 1 Renumbered as BS EN ISP
11185-10
1994 Information Technology - International
Standardized Profiles FVT2nn - Virtual
Terminal Basic Class - Register of Control
Object Type Definitions - Part 11: FVT232 Paged FEPCO (Field Entry Pilot Control
Object) No.1 Renumbered as BS EN ISP
11185-11:
1995 Information Technology - International
Standardized Profiles FVT2nn - Virtual
Terminal Basic Class - Register of Control
Object Type Definitions Part 13: FVT2111 Waiting Time Control Object (S)
1995 Information Technology Representation for Human Communication
of State Transition of Software (S)
1994 Information Technology Programming Languages - Generic Package
of Elementary Functions for Ada (S)
1992 Information Technology - Data
Compression for Information Interchange Adaptive Coding with Embedded Dictionary
- DCLZ Algorithm
1995 Information Technology - International
Standardized Profiles FVT2nn - Virtual
Terminal Basic Class - Register of Control
Object Type Definitions Part 12: FVT2116 Generalized Telnet Synch Control Object;
FVT2117 - Generalized Telnet Signal
Control O
1995 Information Technology - International
Standardized Profiles FVT2nn - Virtual
Terminal Basic Class - Register of Control
Object Type Definitions Part 14: FVT2112 Printer Control Object (S)
BS ISO/IEC ISP 11185-15
BS ISO/IEC ISP 11185-16
BS ISO/IEC ISP 11185-17
BS ISO/IEC ISP 11188-1
BS ISO/IEC ISP 11188-1
BS ISO/IEC ISP 11188-2
BS ISO/IEC ISP 11190
BS ISO/IEC 11544
BS ISO/IEC 11557
1995 Information Technology - International
Standardized Profiles FVT2nn - Virtual
Terminal Basic Class - Register of Control
Object Type Definitions Part 15: FVT2113 Field Definition Management Control Object
(S)
1995 Information Technology - International
Standardized Profiles FVT2nn - Virtual
Terminal Basic Class - Register of Control
Object Type Definitions Part 16: FVT2114 Terminal Signal Titles Control Object (S)
1995 Information Technology - International
Standardized Profiles FVT2nn - Virtual
Terminal Basic Class - Register of Control
Object Type Definitions Part 17: FVT2115 Help Text Control Object (S)
1995 Information Technology - International
Standardized Profile - Common Upper Layer
Requirements - Part 1: Basic Connection
Oriented Requirements Renumbers BS as BS
EN ISP 11188-1: 1997; (S)
1995 Amd 1 Information Technology International Standardized Profile - Common
Upper Layer Requirements - Part 1: Basic
Connection Oriented Requirements AMD
9476 May 1997; Renumbered as BS EN ISP
11188-1: 1997 (S)
1996 Information Technology - International
Standardized Profile - Common Upper Layer
Requirements - Part 2: Basic Connection
Oriented Requirements for ROSE-Based
Profiles (S)
1995 Information Technology - International
Standardized Profile FD13 - Directory Data
Definitions - FTAM Use of the Directory
(Renumbered as BS EN ISP 11190: 1996) (S)
1993 Information Technology - Coded
Representation of Picture and Audio
Information - Progressive Bi-Level Image
Compression (Renumbered as BS EN
ISO/IEC 11544: 1995) (S)
1992 Information Technology - 3,81 mm
Wide Magnetic Tape Cartridge for
Information Interchange - Helical Scan
Recording - DDS-DC Format Using 60 m
and 90 m Length Tapes (S)
BS ISO/IEC 11559
BS ISO/IEC 11560
BS ISO/IEC 11569
BS ISO/IEC 11570
BS ISO/IEC 11571
BS ISO/IEC 11575
BS ISO/IEC 11576
BS ISO/IEC 11573
BS ISO/IEC 11577
BS ISO/IEC 11578
BS ISO/IEC 11586-1
1993 Information Technology - Data
Interchange on 12,7 mm Wide 18-Track
Magnetic Tape Cartridges - Extended Format
(S)
1992 Information Technology - Information
Interchange on 130 mm Optical Disk
Cartridges Using the Magneto-Optical Effect,
for Write Once, Read Multiple Functionality
(S)
1993 Information Technology Telecommunications and Information
Exchange Between Systems - 26-Pole
Interface Connector Mateability Dimensions
and Contact Number Assignments (S)
1992 Information Technology Telecommunications and Information
Exchange Between Systems - Open Systems
Interconnection - Transport Protocol
Identification Mechanism (S)
1998 Information Technology Telecommunications and Information
Exchange between Systems - Private
Integrated Services Networks - Addressing
(S)
1995 Information Technology Telecommunications and Information
Exchange Between Systems - Protocol
Mappings for the OSI Data Link Service (S)
1994 Information Technology - Procedure for
the Registration of Algorithms for the
Lossless Compression of Data (S)
1994 Information Technology Telecommunications and Information
Exchange Between Systems Synchronization Methods and Technical
Requirements for Private Integrated Services
Networks (S)
1995 Information Technology - Open
Systems Interconnection - Network Layer
Security Protocol (S)
1996 Information Technology - Open
Systems Interconnection - Remote Procedure
Call (RPC) (S)
1996 Information Technology - Open
Systems Interconnection - Generic Upper
Layers Security: Overview, Models and
BS ISO/IEC 11586-2
BS ISO/IEC 11586-3
BS ISO/IEC 11586-4
BS ISO/IEC 11586-5
BS ISO/IEC 11586-6
BS ISO/IEC 11587
BS ISO/IEC 11588-8
BS ISO/IEC TR 11589
BS ISO/IEC TR 11590
BS ISO/IEC 11693
BS ISO/IEC 11693
BS ISO/IEC 11694-1
BS ISO/IEC 11694-1
Notation (S)
1996 Information Technology - Open
Systems Interconnection - Generic Upper
Layers Security: Security Exchange Service
Element (SESE) Service Definition (S)
1996 Information Technology - Open
Systems Interconnection - Generic Upper
Layers Security: Security Exchange Service
Element (SESE) Protocol Specification (S)
1996 Information Technology - Open
Systems Interconnection - Generic Upper
Layers Security: Protecting Transfer Syntax
Specification (S)
1997 Information Technology - Open
Systems Interconnection - Generic Upper
Layers Security: Security Exchange Service
Element (SESE) Protocol Implementation
Conformance Statement (PICS) Proforma (S)
1997 Information Technology - Open
Systems Interconnection - Generic Upper
Layers Security: Protecting Transfer Syntax
Protocol Implementation Conformance
Statement (PICS) Proforma (S)
1996 Information Technology - Open
Systems Interconnection - Application
Context for Systems Management with
Transaction Processing (S)
1997 Information Technology - Message
Handling Systems (MHS) Management Part
8: Message Transfer Agent Management (S)
1995 Information Technology - Open
Systems Interconnection - LOTOS
Description of the CCR Service (S)
1995 Information Technology - Open
Systems Interconnection - LOTOS
Description of the CCR Protocol (S)
2000 Corr 1 Identification Cards - Optical
Memory Cards - General Characteristics
CORR 13194: June 2001; (S)
Faulty Standard 2000 Identification Cards Optical Memory Cards - General
Characteristics (S)
2000 Identification Cards - Optical Memory
Cards - Linear Recording Method - Part 1:
Physical Characteristics (S)
1994 Identification Cards - Optical Memory
BS ISO/IEC 11694-3
BS ISO/IEC TR 10034
BS ISO/IEC 10035
BS ISO/IEC TR 10037
BS ISO/IEC 10040
BS ISO/IEC 10021-2
BS ISO/IEC 10021-2
BS ISO/IEC 10021-2
BS ISO/IEC 10021-2
BS ISO/IEC 10021-2
BS ISO/IEC 10021-2
Cards - Linear Recording Method Part 1:
Physical Characteristics (S)
2001 Identification Cards - Optical Memory
Cards - Linear Recording Method - Part 3:
Optical Properties and Characteristics (S)
1990 Guidelines for the Preparation of
Conformity Clauses in Programming
Language Standards
1991 Information Technology - Open
Systems Interconnection - Connectionless
ACSE Protocol Specification
1991 Information Technology - SGML and
Text-Entry Systems - Guidelines for SGML
Syntax-Directed Editing Systems
1992 Information Technology - Open
Systems Interconnection - Systems
Management Overview
1990 Amd 1 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 2:
Overall Architecture (AMD 8386) January
15, 1995 (S)
1990 Amd 2 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 2:
Overall Architecture (AMD 7140) July 15,
1992 (Technical Corr 2) (S)
1990 Amd 2 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 2:
Overall Architecture (AMD 8548) May 15,
1995 (S)
1990 Amd 3 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 2:
Overall Architecture (AMD 7272) August
15, 1992 (Technical Corr 3) (S)
1990 Amd 4 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 2:
Overall Architecture (AMD 7541) December
15, 1992 (Technical Corr 4)
1990 Amd 5 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 2:
Overall Architecture (AMD 8170) May 15,
BS ISO/IEC 10021-4
BS ISO/IEC 10021-4
BS ISO/IEC 10021-4
BS ISO/IEC 10021-4
BS ISO/IEC 10021-4
BS ISO/IEC 10021-4
BS ISO/IEC 10021-4
1994 (S)
1990 Amd 1 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 4:
Message Transfer System: Abstract Service
Definition and Procedures (AMD 6848)
September 30, 1991)
1990 Amd 1 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 4:
Message Transfer System: Abstract Service
Definition and Procedures (AMD 8546) May
15, 1995 (S)
1990 Amd 2 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 4:
Message Transfer System: Abstract Service
Definition and Procedures (AMD 7141) July
15, 1992 (S)
1990 Amd 3 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 4:
Message Transfer System: Abstract Service
Definition and Procedures AMD 7274;
August 15, 1992; Technical Corrigendum 3
(S)
1990 Amd 4 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 4:
Message Transfer System: Abstract Service
Definition and Procedures AMD 7542;
December 15, 1992; Technical Corrigendum
4 (S)
1990 Amd 5 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 4:
Message Transfer System: Abstract Service
Definition and Procedures AMD 7683;
March 15, 1993; Technical Corrigendum 5
(S)
1990 Amd 6 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 4:
Message Transfer System: Abstract Service
Definition and Procedures AMD 8171; May
15, 1994; Technical Corrigendum 6 (S)
BS ISO/IEC 10040
BS ISO/IEC 10089
BS ISO/IEC 10090
BS ISO/IEC 10021-4
BS ISO/IEC 10021-4
BS ISO/IEC 10021-5
BS ISO/IEC 10021-5
BS ISO/IEC 10021-5
BS ISO/IEC 10021-5
BS ISO/IEC 10021-5
1992 Corr.1 Information Technology - Open
Systems Interconnection - Systems
Management Overview CORR 8516; April
15, 1995; (S)
1991 Information Technology - 130 mm
Rewritable Optical Disk Cartridge for
Information Interchange
1992 Information Technology - 90 mm
Optical Disk Cartridges, Rewritable and
Read Only, for Data Interchange
1990 Amd 7 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 4:
Message Transfer System: Abstract Service
Definition and Procedures AMD 8392;
January 15, 1995; Technical Corrigendum 7
(S)
1990 Amd 9 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 4:
Message Transfer System: Abstract Service
Definition and Procedures AMD 8582; July
15, 1995; Technical Corrigendum 9 (S)
1994 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 5:
Message Store: Abstract Service Definition
(S)
1990 Amd 1 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 5:
Message Store: Abstract Service Definition
(AMD 6849) September 30, 1991
1990 Amd 2 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 5:
Message Store: Abstract Service Definition
(AMD 7142) July 15, 1992 (Technical Corr
2) (S)
1990 Amd 3 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 5:
Message Store: Abstract Service Definition
(AMD 7275) August 15, 1992 (Technical
Corr 3) (S)
1990 Amd 4 Information Technology - Text
BS ISO/IEC 10021-5
BS ISO/IEC 10021-5
BS ISO/IEC 10021-5
BS ISO/IEC 10028
BS ISO/IEC 10030
BS ISO/IEC 10030
BS ISO/IEC TR 10091
BS ISO/IEC 10118-1
BS ISO/IEC 10118-2
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 5:
Message Store: Abstract Service Definition
(AMD 7543) December 15, 1992 (Technical
Corr 4) (S)
1990 Amd 5 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 5:
Message Store: Abstract Service Definition
(AMD 7684) March 15, 1993 (Technical
Corr 5) (S)
1990 Amd 6 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 5:
Message Store: Abstract Service Definition
(AMD 8393) January 15, 1995 (Technical
Corr 6) (S)
1990 Amd 7 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 5:
Message Store: Abstract Service Definition
(AMD 8545) May 15, 1995 (Technical Corr
7) (S)
1993 Information Technology Telecommunications and Information
Exchange Between Systems - Definition of
the Relaying Functions of a Network Layer
Intermediate System (S)
1995 Information Technology Telecommunications and Information
Exchange Between Systems - End System
Routeing Information Exchange Protocol for
Use in Conjunction with ISO/IEC 8878
(Replaces BS ISO 10030: 1991) (S)
1990 Information Technology Telecommunications and Information
Exchange Between Systems - End System
Routeing Information Exchange Protocol for
Use in Conjunction with ISO 8878
1995 Information Technology - Technical
Aspects of 130 mm Optical Disk Cartridge
Write-Once Recording Format (S)
1994 Information Technology - Security
Techniques - Hash-Functions - Part 1:
General (S)
1994 Information Technology - Security
BS ISO/IEC 10030
BS ISO/IEC 10030
BS ISO/IEC 10035-2
BS ISO/IEC 10118-3
BS ISO/IEC 10149
BS ISO/IEC 10149
BS ISO/IEC 10168-4
BS ISO/IEC 10169-1
BS ISO/IEC 10170-1
BS ISO/IEC TR 10171
Techniques - Hash-Functions - Part 2: HashFunctions Using an n-Bit Block Cipher
Algorithm (S)
1990 Amd 1 Information Technology Telecommunications and Information
Exchange Between Systems - End System
Routeing Information Exchange Protocol for
Use in Conjunction with ISO 8878 (AMD
7650) March 15, 1993 (Technical Corr 1) (S)
1990 Amd 2 Information Technology Telecommunications and Information
Exchange Between Systems - End System
Routeing Information Exchange Protocol for
Use in Conjunction with ISO 8878 (AMD
7885) November 15, 1993 (S)
1995 Information Technology - Open
Systems Interconnection - Connectionless
Protocol for the Association Control Service
Element: Protocol Implementation
Conformance (PICS) Proforma (S)
1998 Information Technology - Security
Techniques - Hash-Functions - Part 3:
Dedicated Hash-Functions (S)
1989 Information Technology - Data
Interchange on Read-Only 120 mm Optical
Data Disks (CD-ROM) (S)
1989 Amd 1 Information Technology - Data
Interchange on Read-Only 120 mm Optical
Data Disks (CD-ROM) (AMD 6860) October
31, 1991
1996 Information Technology - Open
Systems Interconnection - Conformance Test
Suite for the Session Protocol Part 4: Test
Management Protocol Specification (S)
1991 Information Technology - Open
Systems Interconnection - Conformance Test
Suite for the ACSE Protocol - Part 1: Test
Suite Structure and Test Purposes
1993 Information Technology - Open
Systems Interconnection - Conformance Test
Suite for the FTAM Protocol - Part 1: Test
Suite Structure and Test Purposes (S)
1994 Information Technology Telecommunications and Information
Exchange between Systems - List of
Standard Data Link Layer Protocols That
BS ISO/IEC TR 10172
BS ISO/IEC TR 10176
BS ISO/IEC 10177
BS ISO/IEC 10181-1
BS ISO/IEC 10181-2
BS ISO/IEC 10181-3
BS ISO/IEC 10181-4
BS ISO/IEC 10181-5
BS ISO/IEC 10181-6
BS ISO/IEC 10181-7
BS ISO/IEC TR 10182
Utilize High-Level Data Link Control
(HDLC) Classes of Procedures and List of
Standardized XID Format Identifiers a
1991 Information Technology Telecommunications and Information
Exchange Between Systems Network/Transport Protocol Interworking
Specification
2001 Information Technology - Guidelines
for the Preparation of Programming
Language Standards (S)
1993 Information Technology Telecommunications and Information
Exchange Between Systems - Provision of
the Connection-Mode Network Internal
Layer Service by Intermediate Systems Using
ISO/IEC 8208, the X.25 Packet Layer
Protocol (S)
1996 Information Technology - Open
Systems Interconnection - Security
Frameworks for Open Systems: Overview (S)
1996 Information Technology - Open
Systems Interconnection - Security
Frameworks for Open Systems:
Authentication Framework (S)
1996 Information Technology - Open
Systems Interconnection - Security
Frameworks for Open Systems: Access
Control Framework (S)
1997 Information Technology - Open
Systems Interconnection - Security
Frameworks for Open Systems: NonRepudiation Framework (S)
1996 Information Technology - Open
Systems Interconnection - Security
Frameworks for Open Systems:
Confidentiality Framework (S)
1996 Information Technology - Open
Systems Interconnection - Security
Frameworks for Open Systems: Integrity
Framework (S)
1996 Information Technology - Open
Systems Interconnection - Security
Frameworks for Open Systems: Security
Audit and Alarms Framework (S)
1993 Information Technology -
BS ISO/IEC 10206
BS ISO/IEC 10279
BS ISO/IEC 10279
BS ISO/IEC 10373-1
BS ISO/IEC 10373-2
BS ISO/IEC 10373-3
BS ISO/IEC 10373-5
BS ISO/IEC 10373-6
BS ISO/IEC 10373-7
BS ISO/IEC 10514-1
BS ISO/IEC 10514-2
BS ISO/IEC 10514-3
BS ISO/IEC 10536-1
BS ISO/IEC 10588
BS ISO/IEC ISP 10607-1
Programming Languages, Their
Environments and System Software
Interfaces - Guidelines for Language
Bindings (S)
1991 Information Technology Programming Languages - Extended Pascal
1991 Information Technology Programming Languages - Full BASIC
1991 Amd 1 Information Technology Programming Languages - Full BASIC
(AMD 8696) July 15, 1995 (S)
1998 Identification Cards - Test Methods Part 1: General Characteristics Tests (S)
1998 Identification Cards - Test Methods Part 2: Cards with Magnetic Stripes (S)
2001 Identification Cards - Test Methods Part 3: Integrated Circuit(s) Cards with
Contacts and Related Interface Devices (S)
1998 Identification Cards - Test Methods Part 5: Optical Memory Cards (S)
2001 Identification Cards - Test Methods Part 6: Proximity Cards (S)
2001 Identification Cards - Test Methods Part 7: Vicinity Cards (S)
1996 Information Technology Programming Languages Part 1: Modula-2,
Base Language (S)
1998 Information Technology Programming Languages - Part 2: Modula-2,
Generics in Modula-2 (S)
1998 Information Technology Programming Languages - Part 3: Modula-2,
Object-Oriented Modula-2 (S)
2000 Identification Cards - Contactless
Integrated Circuit(s) Cards - Closed-Coupled
Cards - Part: 1 Physical Characteristics (S)
1993 Information Technology - Use of X.25
Packet Layer Protocol in Conjunction with
X.21/X.21 bis to Provide the OSI
Connection-Mode Network Service (S)
1990 Amd 1 Information Technology International Standardized Profiles AFTnn File Transfer, Access and Management - Part
1: Specification of ACSE, Presentation and
Session Protocols for the Use by FTAM
(Technical Corr 1)
BS ISO/IEC ISP 10607-2
BS ISO/IEC ISP 10607-3
BS ISO/IEC 9506-2
BS ISO/IEC 9506-2
BS ISO/IEC 9506-3
BS ISO/IEC ISP 10607-4
BS ISO/IEC ISP 10607-5
BS ISO/IEC ISP 10607-6
BS ISO/IEC ISP 10608-5
BS ISO/IEC ISP 10608-6
1990 Amd 1 Information Technology International Standardized Profiles AFTnn File Transfer, Access and Management - Part
2: Definition of Document Types, Constraint
Sets and Syntaxes (AMD 7153) July 15,
1992
1990 Amd 1 Information Technology International Standardized Profiles AFTnn File Transfer, Access and Management - Part
3: AFT 11 - Simple File Transfer Service
(Unstructured) (Technical Corr 1)
1990 Industrial Automation Systems Manufacturing Message Specification - Part
2: Protocol Specification (S) (Renumbered as
BS EN 29506-2)
1990 Amd 1 Industrial Automation Systems Manufacturing Message Specification - Part
2: Protocol Specification (AMD 7992)
November 15, 1993 (S)
1991 Industrial Automation Systems Manufacturing Message Specification - Part
3: Companion Standard for Robotics
1991 Information Technology - International
Standardized Profiles AFTnn - File Transfer,
Access and Management - Part 4: AFT12 Positional File Transfer Service (Flat)
1991 Information Technology - International
Standardized Profiles AFTnn - File Transfer,
Access and Management - Part 5: AFT22 Positional File Access Service (Flat)
1991 Information Technology - International
Standardized Profiles AFTnn - File Transfer,
Access and Management - Part 6: AFT3 File Management Service
1992 Information Technology - International
Standardized Profile TAnnnn - ConnectionMode Transport Service Over
Connectionless-Mode Network Service Part
5: TA1111/TA1121 Profile Including
Subnetwork-Dependent Requirements for
X.25 Packet-Switched Data Ne
1995 Information Technology - International
Standardized Profile TAnnnn - ConnectionMode Transport Service over
Connectionless-Mode Network Service Part
6: Definition of Profile TA54, Operation over
BS ISO/IEC ISP 10608-6
BS ISO/IEC ISP 10608-14
BS ISO/IEC ISP 10609-1
BS ISO/IEC ISP 10609-2
BS ISO/IEC ISP 10609-3
BS ISO/IEC ISP 10609-3
BS ISO/IEC ISP 10609-4
an FIDDI LAN Subnetwork (S)
1995 Amd 1 Information Technology International Standardized Profile TAnnnn Connection-Mode Transport Service over
Connectionless-Mode Network Service Part
6: Definition of Profile TA54, Operation
Over an FDDI LAN Subnetwork Renumbers
BS EN ISP 106081995 Information Technology - International
Standardized Profile TAnnnn - ConnectionMode Transport Service over
Connectionless-Mode Network Service Part
14: MAC, PHY and PMD Sublayer
Dependent and Station Management
Requirements over an FDDI LAN Subnetw
1992 Information Technology - International
Standardized Profiles TB, TC, TD and TE Connection-Mode Transport Service over
Connection-Mode Network Service - Part 1:
Subnetwork-Type Independent Requirements
for Group TB
1992 Information Technology - International
Standardized Profiles TB, TC, TD and TE Connection-Mode Transport Service over
Connection-Mode Network Service - Part 2:
Subnetwork-Type Independent Requirements
for Group TC
1992 Information Technology - International
Standardized Profiles TB, TC, TD and TE Connection-Mode Transport Service over
Connection-Mode Network Service - Part 3:
Subnetwork-Type Independent Requirements
for Group TD
1992 Amd 1 Information Technology International Standardized Profiles TB, TC,
TD and TE - Connection-Mode Transport
Service over Connection-Mode Network
Service Part 3: Subnetwork-Type
Independent Requirements for Group TD
Renumbers BS EN ISP 10609-3: 1
1992 Information Technology - International
Standardized Profiles TB, TC, TD and TE Connection-Mode Transport Service over
Connection-Mode Network Service - Part 4:
Subnetwork-Type Independent Requirements
for Group TE
BS ISO/IEC 9506-4
BS ISO/IEC 9541-1
BS ISO/IEC 9541-1
BS ISO/IEC ISP 10609-4
BS ISO/IEC ISP 10609-5
BS ISO/IEC ISP 10609-6
BS ISO/IEC ISP 10609-7
BS ISO/IEC ISP 10609-6
BS ISO/IEC ISP 10609-7
1992 Industrial Automation Systems Manufacturing Message Specification - Part
4: Companion Standard for Numerical
Control (S)
1991 Information Technology - Font
Information Interchange - Part 1:
Architecture (S)
1991 Amd 1 Information Technology - Font
Information Interchange - Part 1:
Architecture (AMD 7571) February 15, 1993
(Technical Corr 1)
1992 Amd 1 Information Technology International Standardized Profiles TB, TC,
TD and TE - Connection-Mode Transport
Service over Connection-Mode Network
Service Part 4: Subnetwork-Type
Independent Requirements for Group TE
Renumbers BS EN ISP 10609-4: 1
1992 Information Technology - International
Standardized Profiles TB, TC, TD and TE Connection-Mode Transport Service over
Connection-Mode Network Service - Part 5:
Definition of Profiles TB1111/TB1121
1992 Information Technology - International
Standardized Profiles TB, TC, TD and TE Connection-Mode Transport Service over
Connection-Mode Network Service - Part 6:
Definition of Profiles TC1111/TC1121
Renumbered BS EN ISP 10609-6: 1997; (S)
1992 Information Technology - International
Standardized Profiles TB, TC, TD and TE Connection-Mode Transport Service over
Connection-Mode Network Service - Part 7:
Definition of Profiles TD1111/TD1121
Renumbered as BS EN ISP 10609-7: 1997;
(S)
1992 Amd 1 Information Technology International Standardized Profiles TB, TC,
TD and TE - Connection-Mode Transport
Service over Connection-Mode Network
Service - Part 6: Definition of Profiles
TC1111/TC1121 AMD 9473 May 1997;
Renumbered BS EN ISP 10609
1992 Amd 1 Information Technology International Standardized Profiles TB, TC,
TD and TE - Connection-Mode Transport
BS ISO/IEC ISP 10609-8
BS ISO/IEC ISP 10609-8
BS ISO/IEC ISP 10609-9
BS ISO/IEC ISP 10609-9
BS ISO/IEC ISP 10609-10
BS ISO/IEC 9541-1
BS ISO/IEC 9541-2
Service over Connection-Mode Network
Service - Part 7: Definition of Profiles
TD1111/TD1121 AMD 9569; Renumbered
as BS EN ISP 10609-7: 19
1992 Information Technology - International
Standardized Profiles TB, TC, TD and TE Connection-Mode Transport Service over
Connection-Mode Network Service - Part 8:
Definition of Profiles TE1111/TE1121
Renumbered as BS EN ISP 10609-8: 1997;
(S)
1992 Amd 1 Information Technology International Standardized Profiles TB, TC,
TD and TE - Connection-Mode Transport
Service over Connection-Mode Network
Service - Part 8: Definition of Profiles
TE1111/TE1121 AMD 9567 May 1997,
Renumbered as BS EN ISP 10
1992 Information Technology - International
Standardized Profiles TB, TC, TD and TE Connection-Mode Transport Service over
Connection-Mode Network Service - Part 9:
Subnetwork-Type Dependent Requirements
for Network Layer, Data Link Layer and
Physical L
1992 Amd 1 Information Technology International Standardized Profiles TB, TC,
TD and TE - Connection-Mode Transport
Service over Connection-Mode Network
Service Part 9: Subnetwork-Type Dependent
Requirements for Network Layer, Data Link
Layer and Physic
1994 Information Technology - International
Standardized Profiles TB, TC, TD and TE Connection-Mode Transport Service Over
Connection-Mode Network Service Part 10:
LAN Subnetwork-Dependent, MediaIndependent Requirements Renumbered as
BS EN ISP 10609-10
1991 Amd 3 Information Technology - Font
Information Interchange Part 1: Architecture
(AMD 8920) November 15, 1995 (Technical
Corr 3) (S)
1991 Information Technology - Font
Information Interchange - Part 2: Interchange
Format
BS ISO/IEC 9541-2
BS EN ISO 11816-1
BS EN ISO 11820
BS EN ISO 11821
BS EN ISO 11890-1
BS EN ISO 11890-1
BS EN ISO 11890-2
BS EN ISO 11890-2
BS EN ISO 11897
BS EN ISO 11925-2
BS EN ISO 11957
BS EN ISO 11961
1991 Amd 1 Information Technology - Font
Information Interchange - Part 2: Interchange
Format (AMD 7813) July 15, 1993
(Technical Corr 1) (S)
2000 Milk and Milk Products Determination of Alkaline Phosphatase
Activity Using a Fluorimetric Method - Part
1: Milk and Milk-Based Drinks Supersedes
BS ISO 11816-1: 1997; (W)
1997 Acoustics - Measurements on Silencers
In Situ (F)
1997 Acoustics - Measurement of the In Situ
Sound Attenuation of a Removable Screen
(F)
2001 Corr 1 Paints and Varnishes Determination of Volatile Organic
Compound (VOC) Content - Part 1:
Difference Method CORR 13647: January
21, 2002; Renumbers BS 3900-A23:2000;
(W)
2001 Paints and Varnishes - Determination of
Volatile Organic Compound (VOC) Content
- Part 1: Difference Method Renumbers BS
3900-A23:2000; (W)
2001 Corr 1 Paints and Varnishes Determination of Volatile Organic
Compound (VOC) Content - Part 2: GasChromatographic Method CORR 13646:
January 25, 2002; Renumbers BS 3900-A24:
2000; (W)
2001 Paints and Varnishes - Determination of
Volatile Organic Compound (VOC) Content
- Part 2: Gas-Chromatographic Method
Renumbers BS 3900-A24:2000; (W)
2001 Packaging - Sacks Made From
Thermoplastic Flexible Film - Tear
Propagation on Edge Folds (ISO
11897:1999) (H)
2002 Reaction to Fire Tests - Ignitability of
Building Products Subjected to Direct
Impingement of Flame - Part 2: Single-Flame
Source Test ISO 11925-2: 2002; (R)
1997 Acoustics - Determination of Sound
Insulation Performance of Cabins Laboratory and in Situ Measurements (F)
1997 Petroleum and Natural Gas Industries -
BS EN ISO 12001
BS EN ISO 12005
BS EN ISO 12017
BS EN ISO 12020
BS EN ISO 12048
BS EN ISP 12061-1
BS EN ISO 15482
BS EN ISO 9606-5
BS EN ISO 9614-2
BS EN ISP 12061-2
BS EN ISP 12061-3
Steel Pipes for Use as Drill Pipe Specification (Q)
1997 Acoustics - Noise Emitted by
Machinery and Equipment - Rules for the
Drafting and Presentation of a Noise Test
Code (F)
2000 Lasers and Laser-Related Equipment Test Methods for Laser Beam Parameters Polarization (H)
1996 Plastics - Poly(Methyl Methacrylate)
Double- and Triple-Skin Sheets - Test
Methods (V)
2000 Water Quality - Determination of
Aluminium - Atomic Absorption
Spectrometric Methods (N)
2001 Packaging - Complete, Filled Transport
Packages - Compression and Stacking Tests
Using a Compression Tester Supersedes BS
ISO 12048:1994; (H)
1997 Information Technology - Open
Systems Interconnection - International
Standardized Profiles: OSI Distributed
Transaction Processing Part 1: Introduction
to the Transaction Processing Profiles
Renumbers BS ISO/IEC ISP 12061-1: 1995;
(S)
1999 Cross Recessed Countersunk Head
Drilling Screws with Tapping Screw Thread
(E)
2000 Approval Testing of Welders - Fusion
Welding - Part 5: Titanium and Titanium
Alloys, Zirconium and Zirconium Alloys (F)
Acoustics - Determination of Sound Power
Levels of Noise Sources Using Sound
Intensity Part 2: Measurement by Scanning
(F)
1997 Information Technology - Open
Systems Interconnection - International
Standardized Profiles: OSI Distributed
Transaction Processing Part 2: Support of
OSI TP APDUs Renumbers BS ISO/IEC ISP
12061-2: 1995; (S)
1997 Information Technology - Open
Systems Interconnection - International
Standardized Profiles: OSI Distributed
Transaction Processing Part 3: Support of
BS EN ISP 12061-4
BS EN ISP 12061-5
BS EN ISP 12062-3
BS EN ISP 12062-4
BS EN ISP 12062-5
BS EN ISP 12064-1
BS EN ISP 12068-1
BS EN ISO 8032
CCR APDUs Renumbers BS ISO/IEC ISP
12061-3: 1995; (S)
1997 Information Technology - Open
Systems Interconnection - International
Standardized Profiles: OSI Distributed
Transaction Processing Part 4: Support of
Session, Presentation and ACSE PDUs
Renumbers BS ISO/IEC ISP 12061-4: 1995;
(S)
1996 Amd 1 Information Technology - Open
Systems Interconnection - International
Standardized Profiles: OSI Distributed
Transaction Processing Part 5: Application
Supported Transactions - Polarized Control
(ATP11) (Amd 8924) August 15, 1996 (S)
1996 Information Technology - International
Standardized Profiles AMH2n - Message
Handling Systems - Interpersonal Messaging
Part 3: AMH22 - IPM Requirements for
Message Transfer (P1) (S)
1996 Information Technology - International
Standardized Profiles AMH2n - Message
Handling Systems - Interpersonal Messaging
Part 4: AMH23 - IPM Requirements for MTS
Access (P3) (S)
1996 Information Technology - International
Standardized Profiles AMH2n - Message
Handling Systems - Interpersonal Messaging
Part 4: AMH24 - IPM Requirements for
Enhanced MS Access (P7) (S)
1998 Information Technology - International
Standardized Profile FOD112 - Open
Document Format: Image Applications Simple Document Structure - Raster
Graphics Content Architecture - Part 1:
Document Application Profile (DAP)
ISO/IEC ISP 12064-1: 1995; (
1997 Information Technology - International
Standardized Profile FDI 4 - Directory Data
Definitions - Use of the Directory for OSI TP
Part 1: FDI 41 - Basic Naming and
Addressing Also Numbered as BS ISO/IEC
ISP 12068-1: 1996; (S)
1999 Rubber and Plastics Hose Assemblies Flexing Combined with Hydraulic Impulse
Test (Half-Omega Test) Renumbers BS ISO
BS EN ISO 8044
BS EN ISO 8067
BS EN ISO/ IEC 8072
BS EN ISO 8130-9
BS EN ISO 8178-1
BS EN ISO 8178-5
BS EN ISO 8178-5
BS EN ISO 8192
BS EN ISO 8205-1
BS EN ISO 8205-2
BS EN ISO 8205-3
BS EN ISO 8222
8032: 1997; Supersedes BS 5173: Section
102.7: 1988; (E)
2000 Corrosion of Metals and Alloys - Basic
Terms and Definitions Supersedes BS 6918:
1990; (G)
1995 Flexible Cellular Polymeric Materials Determination of Tear Strength (Partially
Replaces BS 4443: Part 6: 1991) (V)
1996 Amd 1 Information Technology - Open
Systems Interconnection - Transport Service
Definition (AMD 9091) June 15, 1996 (S)
2000 Coating Powders - Part 9: Sampling
Renumbers BS 3900-J1: 1993; Supersedes
BS 3900-J1: 1987; (W)
1996 Reciprocating Internal Combustion
Engines - Exhaust Emission Measurement
Part 1: Test-Bed Measurement of Gaseous
and Particulate Exhaust Emissions (E)
1997 Reciprocating Internal Combustion
Engines - Exhaust Emission Measurement
Part 5: Test Fuels (E)
1997 Amd 1 Reciprocating Internal
Combustion Engines - Exhaust Emission
Measurement - Part 5: Test Fuels AMD
10536; August 1999; (E)
1995 Amd 1 Water Quality Part 5: Biological
Methods Section 5.7: Test for Inhibition of
Oxygen Consumption by Activated Sludge
(ISO 8192: 1986) (AMD 8455) March 15,
1995 (Also Numbered BS 6068: Section 5.7:
1987) (N)
1997 Water-Cooled Secondary Connection
Cables for Resistance Welding Part 1:
Dimensions and Requirements for DoubleConductor Connection Cables (F)
1997 Water-Cooled Secondary Connection
Cables for Resistance Welding Part 2:
Dimensions and Requirements for SingleConductor Connection Cables (F)
1997 Water-Cooled Secondary Connection
Cables for Resistance Welding Part 3: Test
Requirements (E)
1996 Amd 1 Petroleum Measurement
Systems - Calibration - Temperature
Corrections for Use with Volumetric
Reference Measuring Systems (AMD 8902)
BS EN ISO 8249
BS EN ISO 8256
BS EN ISO 8261
BS EN ISO 8282
BS EN ISO 8289
BS EN ISO 8308
BS EN ISO 8351-1
BS EN ISO 8373
BS EN ISO 8292
BS EN ISO 8311
BS EN ISO 8320-2
June 15, 1996 (W)
2000 Welding - Determination of Ferrite
Number (FN) in Austenitic and Duplex
Ferritic-Austentic Cr-Ni Stainless Steel Weld
Metals Supersedes BS 6787:1987; (F)
1997 Plastics - Determination of TensileImpact Strength Renumbers BS 2782: PT 3:
METH 354A and METH 354B: 1991; (V)
2002 Milk and Milk Products - General
Guidance for the Preparation of Test
Samples, Initial Suspensions and Decimal
Dilutions for Microbiological Examination
Supersedes BS 4285-1-2:1984 and BS 42851-3:1984; (W)
1997 Dental Equipment - Mercury and Alloy
Mixers and Dispensers (N)
2001 Corr 1 Vitreous and Porcelsin Enamels
- Low Voltage Test for Detecting and
Locating Defects CORR 13557: November 8,
2001; Supersedes BS 1344-20:1987; (F)
1996 Rubber and Plastics Hoses and Tubing Determination of Transmission of Liquids
Through Hose and Tubing Walls (E)
1997 Amd 1 Packaging - Method of
Specification for Sacks Part 1: Paper Sacks
AMD 9394 March 15, 1997; Renumbering
BS ISO 8351-1 : 1994; (H)
1996 Manipulating Industrial Robots Vocabulary (Q)
1995 Amd 1 Animal and Vegetable Fats and
Oils - Determination of Solid Fat Content Pulsed Nuclear Magnetic Resonance Method
(AMD 8669) July 15, 1995 (Read in
Conjunction with BS 684: Part 0. Also
Numbered BS 684: Sec 2.22: 1992) (W)
1996 Amd 1 Refrigerated Light Hydrocarbon
Fluids - Calibration of Membrane Tanks and
Independent Prismatic Tanks in Ships
Physical Measurement (AMD 8897) June 15,
1996 (Q)
2001 Contact Lenses and Contact Lens Care
Products - Vocabulary - Part 2: Contact Lens
Care Products Also Numbered as BS 720819:2001; Together with BS EN ISO 8320-1,
When Published will Supersede BS 35213:1988; (N)
BS EN ISO 8321-1
BS EN ISO 8321-2
BS EN ISO 8351-2
BS EN 61305-3
BS EN 61300-3-36
BS EN 61315
BS EN 61319-1
BS EN 61327
BS EN 61334-3-22
BS EN 61512-1
BS EN 61549
BS EN 61334-4-511
1997 Optics and Optical Instruments Contact Lenses Part 1: Specification for
Rigid Corneal and Scleral Contact Lenses
Renumberes BS 7208: Part 1: 1992; (N)
2000 Ophthalmic Optics - Specifications for
Material, Optical and Dimensional Properties
of Contact Lenses - Part 2: Single-Vision
Hydrogel Contact Lenses Also Known as BS
7208-24:2000; (N)
1997 Amd 1 Packaging - Method of
Specification for Sacks Part 2: Sacks Made
from Thermoplastic Flexible Film AMD
9395 March 15, 1997; Renumbering BS ISO
8351-2 : 1994; (H)
1995 Household High-Fidelity Audio
Equipment and Systems - Methods of
Measuring and Specifying the Performance
Part 3: Amplifiers (IEC 1305-3: 1995) (S)
2000 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures - Part 3-36:
Examinations and Measurements Measurement Methods for the Inside and
Outside Diameters of Fibre Optic Conncetor
Ferrules IEC 61300-3-36:
1997 Calibration of Fibre Optic Power
Meters IEC 61315: 1995; (S)
1996 Interconnections of Satellite Receiving
Equipment Part 1: Europe (IEC 1319-1:
1995) (S)
1996 Helical-Scan Digital Composite Video
Cassette Recording System Using 12,65 mm
(0,5 in) Magnetic Tape - Format D-3 (IEC
1327: 1995) (S)
2001 Distribution Automation Using
Distribution Line Carrier Systems - Part 322: Mains Signalling Requirements - MV
Phase-to-Earth and Screen-to-Earth Intrusive
Coupling Devices IEC 61334-3-22: 2001;
IEC 61334-3-22:2001; (S)
1999 Batch Control - Part 1: Models and
Terminology IEC 61512-1:1997; (Q)
1996 Miscellaneous Lamps (IEC 1549: 1996)
(E)
2001 Distribution Automation Using
Distribution Line Carrier Systems - Part 4-
BS EN 61334-5-1
BS EN 61334-6
BS EN 61337-1-1
BS EN 61338-1-3
BS EN 61340-2-3
BS EN 61340-4-3
BS EN 61340-5-2
BS EN 61347-1
BS EN 61347-2-1
BS EN 60947-3
511: Data Communication Protocols Systems Management - CIASE Protocol IEC
61334-4-511: 2000; (Q)
2001 Distribution Automation Using
Distribution Line Carrier Systems - Part 5-1:
Lower Layer Profiles - The Spread
Frequency Shift Keying (S-FSK) Profile.
Supersedes BS IEC 61334-5-1:1996; IEC
61334-5-1:2001; (S)
2001 Distribution Automation Using
Distribution Line Carrier Systems - Part 6: AXDR Encoding Rule IEC 61334-6:2000; (S)
1998 Filters Using Waveguide Type
Dielectric Resonators Part 1: General
Information, Standard Values and Test
Conditions Section 1: General Information
and Standard Values IEC 61337-1-1: 1995;
(S)
2000 Waveguide Type Dielectric Resonators
- Part 1-3: General Information and Test
Conditions - Measurement Method of
Complex Relative Permittivity for Dielectric
Resonator Materials at Microwave Frequency
test conditions - Measurement Method of
Complex R
2000 Electrostatics - Part 2-3: Methods of
Test for Determining the Resistance and
Resistivity of Solid Planar Materials Used to
Avoid Electrostatic Charge Accumulation
IEC 61340-2-3: 2000; (E)
2002 Electrostatics - Part 4-3: Standard Test
Methods for Specific Applications Footwear IEC 61340-4-3: 2001; (E)
2001 Electrostatics - Part 5-2: Protection of
Electronic Devices from Electrostatic
Phenomena - User Guide Renumbers PD IEC
61340-5-2:1999; (E)
2001 Lamp Controlgear - Part 1: General and
Safety Requirements IEC 61347-1:2000; (E)
2001 Lamp Controlgear - Part 2-1: Particular
Requirements for Starting Devices (Other
Than Glow Starters) IEC 61347-2-1:2000;
(E)
1999 Low-Voltage Switchgear and
Controlgear - Part 3: Switches,
Disconnectors, Switch-Disconnectors and
BS EN 60958-1
BS EN 60950-1
BS EN 61347-2-2
BS EN 60938-2-1
BS EN 60938-2-2
BS EN 60947-1
BS EN 60947-3
BS EN 60947-4-2
BS EN 60947-4-3
BS EN 60947-5-6
BS EN 60953-1
Fuse-Combination Units (E)
2000 Digital Audio Interface - Part 1:
General IEC 60958-1: 1999; (S)
2002 Information Technology Equipment Safety - Part 1: General Requirements (S)
2001 Lamp Controlgear - Part 2-2: Particular
Requirements for D.C> or A.C. Supplied
Electronic Step-Down Convertors for
Filament Lamps IEC 61347-2-2:2000; (E)
2000 Fixed Inductors for Electromagnetic
Interference Suppression - Part 2-1: Blank
Detail Specification - Inductors for Which
Safety Tests Are Required - Assessment
Level D Supersedes BS EN 138101: 1997;
IEC 60938-2-1: 1999; (T)
2000 Fixed Inductors for Electromagnetic
Interference Suppression - Part 2-2: Blank
Detail Specification - Inductors for Which
Safety Tests Are Required (Only) IEC
60938-2-2: 1999; (T)
1998 Amd 1 Low-Voltage Switchgear and
Controlgear Part 1: General Rules AMD
10271; March 15, 1999; Superseded by BS
EN 60947-1: 1999 but Remains Current; (E)
1999 Corr 1 Low-Voltage Switchgear and
Controlgear - Part 3: Switches,
Disconnectors, Switch-Disconnectors and
Fuse-Combination Units CORR 10766; April
2000; (E)
2000 Low-Voltage Switchgear and
Controlgear Part 4-2: Contactors and MotorStarters - AC Semiconductor Motor
Controllers and Starters IEC 60947-4-2:1999;
(E)
2000 Low-Voltage Switchgear and
Controlgear - Part 4.3: Contactors and MotorStarters - AC Semiconductor Controllers and
Contactors for Non-Motor Loads IEC 609474-3: 1999; (E)
2001 Low-Voltage Switchgear and
Controlgear - Part 5-6: Control Circuit
Devices and Switching Elements - DC
Interface for Proximity Sensors and
Switching Amplifiers (NAMUR) IEC 609475-6:1999; (E)
1996 Rules for Steam Turbine Thermal
BS 1831 PART 1
BS 1841 PART 1
BS 1841 PART 1
BS 1846 PART 1
BS 1846 PART 1
BS 1846 PART 2
BS 1853 PART 2
BS 1853 PART 2
BS 185 INDEX
BS 185 SEC 1
BS 185 SEC 10
BS 185 SEC 13
Acceptance Tests Part 1: Method A: High
Accuracy for Large Condensing Steam
Turbines (IEC 953-1: 1990) (Q)
1985 Recommended Common Names for
Pesticides Part 1: Guide to Principles for
Selection of Common Names
1996 Rear-Mounted, Three-Point Linkage on
Agricultural Wheeled Tractors Part 1:
Specification for Categories 1, 2, 3 and 4
(ISO 730-1: 1994) (E)
1991 Rear-Mounted, Three- Point Linkage
on Agricultural Wheeled Tractors Part 1:
Categories 1, 2 and 3
1994 Glossary of Terms Relating to Solid
Fuel Burning Equipment Part 1: Domestic
Appliances (F)
1968 Glossary of Terms Relating to Solid
Fuel Burning Equipment Part 1: Domestic
Appliances
1968 Glossary of Terms Relating to Solid
Fuel Burning Equipment Part 2: Industrial
Water Heating and Steam Raising
Installations
1979 Tubular Fluorescent Lamps for General
Lighting Service Part 2: Lamps Used in the
United Kingdom Not Included in Part 1
1995 Specification for Fluorescent Lamps for
General Lighting Service Part 2:
Specification for Lamps Used in the United
Kingdom Not Included in BS EN 60081, BS
EN 60901, BS EN 61195 and BS EN 61199
(E)
(OBSOLESCENT) 1973 Glossary of
Aeronautical and Astronautical Terms: Index
1969 Amd 1 Glossary of Aeronautical and
Astronautical Terms Section 1: General
(Including Main Types of Aircraft)
(OBSOLESCENT) 1970 Glossary of
Aeronautical and Astronautical Terms
Section 10: Auxiliary Services (Hydraulic,
Pneumatic, Electrical, Air Conditioning and
Refuelling)
(OBSOLESCENT) 1972 Glossary of
Aeronautical and Astronautical Terms
Section 13: Air-Traffic and Ground Services
(General, Air-Traffic Control, Ground
BS 185 SEC 14
BS 185 SEC 15
BS 185 SEC 16
BS 185 SEC 17
BS 185 SEC 18
BS 185 SEC 2
BS 185 SEC 3
BS 185 SEC 4
BS 185 SEC 5
BS 185 SEC 6
Services, Naval Terms)
(OBSOLESCENT) 1972 Glossary of
Aeronautical and Astronautical Terms
Section 14: Radiocommunication and
Radiolocation (Services and Stations, RadioNavigational Aids, Radio Beacons,
Equipment, Miscellaneous)
(OBSOLESCENT) 1972 Glossary of
Aeronautical and Astronautical Terms
Section 15: Meteorology (General, Winds,
Weather, Clouds, Synoptic Meteorology, Ice
Formation in Flight, Instruments)
(OBSOLESCENT) 1973 Glossary of
Aeronautical and Astronautical Terms
Section 16: Personnel
(OBSOLESCENT) 1973 Glossary of
Aeronautical and Astronautical Terms
Section 17: Aerospace Medicine (General,
Disorders and Illusions, Systems and
Equipment)
(OBSOLESCENT) 1970 Glossary of
Aeronautical and Astronautical Terms
Section 18: Astronautics (Vehicles,
Components, Launching, Re-Entry and
Orbits)
(OBSOLESCENT) 1969 Amd 1 Glossary of
Aeronautical and Astronautical Terms
Section 2: Motion of Aircraft (In Flight and
on the Earth's Surface)
(OBSOLESCENT) 1969 Amd 1 Glossary of
Aeronautical and Astronautical Terms
Section 3: Structure (Detail Parts,
Aeroelasticity, Fatigue)
(OBSOLESCENT) 1969 Amd 1 Glossary of
Aeronautical and Astronautical Terms
Section 4: Aerodynamics (Stability and
Control, Performance Fluid Motion and
Model Testing)
(OBSOLESCENT) 1969 Amd 3 Glossary of
Aeronautical and Astronautical Terms
Section 5: Heavier-Than- Air Aircraft
(Aerodynes) (Shape, and Disposition of
Surfaces, Component Parts, Instruments,
Loadings, Weights and Rotorcraft)
(OBSOLESCENT) 1970 Amd 1 Glossary of
Aeronautical and Astronautical Terms
BS 185 SEC 7
BS 185 SEC 8
BS 185 SEC 9
BS 1868
BS 187
BS 1872
BS 1877 PART 10
BS 1877 PART 10
BS 1877 PART 8
BS 1881 PART 106
BS 1881 PART 108
BS 2692 PART 1
Section 6: Ballistic and Guided Missiles
(Propulsion, Launching, Control and
Guidance)
(OBSOLESCENT) 1969 Glossary of
Aeronautical and Astronautical Terms
Section 7: Lighter-Than- Air Aircraft
(Aerostats) (Hull, Envelope, Mooring and
Handling)
(OBSOLESCENT) 1970 Glossary of
Aeronautical and Astronautical Terms
Section 8: Power Plant (Piston Engines, Gas
Turbines and Jet Propulsion)
(OBSOLESCENT) 1970 Glossary of
Aeronautical and Astronautical Terms
Section 9: Propellers
1975 Amd 1 Steel Check Valves (Flanged
and Butt- Welding Ends) for the Petroleum,
Petrochemical and Allied Industries (AMD
6563) July 31, 1990
1978 Amd 1 Calcium Silicate (Sandlime and
Flintlime) Bricks AMD 5427; August 28,
1987; (R)
1984 Electroplated Coatings of Tin
1997 Domestic Bedding Part 10:
Specification for Mattresses and Bumpers for
Children's Cots, Perambulators and Similar
Domestic Articles (L)
1997 Amd 1 Domestic Bedding Part 10:
Specification for Mattresses and Bumpers for
Children's Cots, Perambulators and Similar
Domestic Articles AMD 10765 May 2000;
(L)
1974 Amd 1 Domestic Bedding Part 8:
Pillows and Bolsters for Domestic Use
(Excluding Cellular Rubber Pillows and
Bolters)
1983 Amd 2 Testing Concrete Part 106:
Methods for Determination of Air Content of
Fresh Concrete (AMD 6723) July 31, 1991
1983 Amd 1 Methods of Testing Concrete
Part 108: Method for Making Test Cubes
from Fresh Concrete (AMD 6105) July 31,
1989
1986 Amd 3 Fuses for Voltages Exceeding
1000 V a.c. Part 1: Specification for CurrentLimiting Fuses (IEC 282-1: 1985) (AMD
BS 2692 PART 1
BS 2692 PART 2
BS 2692 PART 3
BS 2693 PART 1
BS 2693 PART 2
BS 2738-1
BS 2738-10
BS 2738-4
BS 2738-6
BS 2738-7
BS 2738-8
6923) April 1, 1992
1986 Amd 4 High-Voltage Fuses Part 1:
Current-Limiting Fuses AMD 8047;
November 15, 1993; Renumbered as BS EN
60282-1: 1993; (E)
1956 Amd 6 Fuses for Voltages Exceeding
1000 V a.c. Part 2: Expulsion Fuses
1990 Fuses for Voltages Exceeding 1000 V
a.c. Part 3: Guide to the Determination of
Short Circuit Power Factor
(OBSOLESCENT) 1956 Amd 3 Screwed
Studs Part 1: General Purpose Studs
(Replaces BS 1083 : 1942)
(OBSOLESCENT) 1964 Amd 1 Screwed
Studs Part 2: Recommendations for High
Grade Studs
1998 Spectacle Lenses - Part 1: Specification
for Tolerances on Optical Properties of
Mounted Spectacle Lenses (N)
2000 Ophthalmic Optics - Uncut Finished
Spectacle Lenses - Part 4: Specifications and
Test Methods for Anti-Reflective Coatings
Also Known as BS EN ISO 8980-4:2000; (N)
1996 Amd 1 Ophthalmic Optics - SemiFinished Spectacle Lens Blanks Part 1:
Specifications for Single-Vision and
Multifocal Lens Blanks AMD 9759;
November 15,1997; Corrected and Reprinted,
January 1999; Renumbered as BS EN ISO
10322-1: 1997; (N)
1996 Amd 1 Ophthalmic Optics - Uncut
Finished Spectacle Lenses - Part 1:
Specifications for Single-Vision and
Multifocal Lenses AMD 9762; November 15,
1997; Corrected and Reprinted, January
1999; Renumbered as BS EN ISO 8980-1:
1997; (N)
1996 Amd 1 Ophthalmic Optics - Uncut
Finished Spectacle Lenses - Part 2:
Specifications for Progressive Power Lenses
AMD 9760; November 15, 1997; Corrected
and Reprinted, January 1999; Renumbered as
BS EN ISO 8980-2: 1997; (N)
1999 Ophthalmic Optics - Uncut Finished
Spectacle Lenses - Part 3: Transmittance
Specifications and Test Methods Also
BS 2738 PART 4
BS 2738 PART 6
BS 2738 PART 7
BS 2738-9
BS 2738 PART 3
BS 2738 PART 8
BS 2742 ADD 1
BS 2745 PART 1
BS 2745 PART 2
BS 2745 PART 3
BS 2750 PART 2
BS 2750 PART 2
Numbered as BS EN ISO 8980-3: 1999 ; (N)
1996 Spectacle Lenses Part 4: Specification
for Single-Vision and Multifocal SemiFinished Lens Blanks (ISO 10322-1: 1996)
(N)
1996 Spectacle Lenses Part 6: Specification
for Single-Vision and Multifocal Uncut
Finished Lenses (ISO 8980-1: 1996) (N)
1996 Spectacle Lenses Part 7: Specification
for Progressive Power Uncut Finished Lenses
(ISO 8980-2: 1996) (N)
1999 CORR 1 Ophthalmic Optics - Uncut
Finished Spectacle Lenses - Part 3:
Transmittance Specifications and Test
Methods Also Numbered as BS 2738-9:1999;
CORR 10800: December 1999; (N)
1991 Spectacle Lenses Part 3: Specification
for the Presentation of Prescriptions and
Prescription Orders for Ophthalmic Lenses
(Replaces BS 3521 : Parts 1 & 2 : 1962
Appendix A)
1997 Spectacle Lenses Part 8: Fundamental
Requirements for Uncut Finished Lenses
Also Numbered as BS EN ISO 14889: 1997;
(N)
1972 Calibration of Instruments in
Ringelmann Number Addendum No. 1
1993 Washer-Disinfectors for Medical
Purposes Part 1: Specification for General
Requirements (Supersedes BS 2745: 1966)
(N)
1993 Washer-Disinfectors for Medical
Purposes Part 2: Specification for Human
Waste Container Washer-Disinfectors
(Supersedes BS 2745: 1966) (N)
1993 Washer-Disinfectors for Medical
Purposes Part 3: Specification for WasherDisinfectors Except Those Used for
Processing Human-Waste Containers and
Laundry (Supersedes BS 2745: 1966) (N)
1993 Acoustics - Measurements of Sound
Insulation in Buildings and of Building
Elements Part 2: Determination, Verification
and Application of Precision Data (F)
1980 Measurement of Sound Insulation in
Buildings and of Building Elements Part 2:
BS 2750 PART 3
BS 2750 PART 9
BS 2750 PART 9
BS 2754
BS 2760
BS 2765
BS 2765
BS 2769 PART 1
BS 2769 SEC 2.1
BS 2769 SEC 2.11
BS 6068 SEC 5.9
Statement of Precision Requirements
(Replaced by BS EN 20140-2 : 1993)
1995 Acoustics - Measurement of Sound
Insulation in Buildings and of Building
Elements Part 3: Laboratory Measurements
of Airborne Sound Insulation of Building
Elements (R)
1987 Measurement of Sound Insulation in
Buildings and of Building Elements Part
9:Method for Labortory Measurement of
Room-To-Room Airborne Sound Insulation
of a Suspended Ceiling with a Plenum Above
it
1994 Amd 1 Acoustics - Measurement of
Sound Insulation in Buildings and of
Building Elements - Part 9: Laboratory
Measurement of Room-to-Room Airborne
Sound Insulation of a Suspended Ceiling
with a Plenum Above It (AMD 7954)
February 15, 1994 (ISO 140-9:
1976 Amd 1 Memorandum Construction of
Electrical Equipment for Protection Against
Electric Shock AMD 2211; February 1977;
(E)
1973 Amd 1 Pitch-Impregnated Fibre Pipes
and Fittings for Below and Above Ground
Drainage (AMD 2675) June 30, 1978 (R)
1969 Dimensions of Temperature Detecting
Elements and Corresponding Pockets
1969 Amd 1 Dimensions of Temperature
Detecting Elements and Corresponding
Pockets (AMD 8317) December 1, 1994 (H)
1984 Hand-Held Electric- Motor-Operated
Tools Part 1: General Requirements
Superseded by BS EN 50144-1: 1999
1984 Hand-Held Electric Motor-Operated
Tools Part 2: Particular Requirements Section
2.1: Drills
1984 Hand-Held Electric- Motor-Operated
Tools Part 2: Particular Requirements Section
2.11: Concrete Vibrators (Supersedes BS
2769 1964)
1990 Amd 1 Water Quality Part 5: Biological
Methods Section 5.9: Method for Assessing
the Inhibition of Nitrification of Activated
Sludge Micro- Organisms by Chemicals and
BS 6068 SEC 6.11
BS 6068 SEC 6.12
BS 6068 SEC 6.1
BS 6068 SEC 6.2
BS 6068 SEC 6.2
BS 6068 SEC 6.2
BS 6068 SEC 6.3
BS 6068 SEC 6.4
BS 6068 SEC 6.5
BS 6068 SEC 6.6
BS 6068 SEC 6.7
BS 6068 SEC 6.8
BS 6068 SEC 6.9
Waste Water (ISO 9509: 1989) (AMD 8456)
March 15, 1995 (N)
1993 Water Quality Part 6: Sampling Section
6.11: Guidance on Sampling of
Groundwaters (ISO 5667-11: 1993) (Read in
Conjunction with Parts 1, 2, and 3 of BS
6068)
1996 Water Quality Part 6: Sampling Section
6.12: Guidance on Sampling of Bottom
Sediments (ISO 5667-12: 1995) (N)
1981 Amd 1 Water Quality - Sampling Part
1: Guidance on the Design of Sampling
Programmes (AMD 7435) February 15, 1994
(ISO 5667-1: 1980) (N)
1991 Water Quality Part 6: Sampling Section
6.2: Guidance on Sampling Techniques (ISO
5667-2: 1991) (N)
1991 Amd 1 Water Quality - Sampling - Part
2: Guidance on Sampling Techniques (ISO
5667-2: 1991) (AMD 7436) August 15, 1993
(N)
1983 Water Quality Part 6: Sampling Section
6.2: Guidance on Sampling Techniques
1996 Water Quality Sampling Guidance on
the Preservation and Handling of Samples
(N)
1987 Water Quality Part 6: Sampling Section
6.4: Guidance on Sampling from Lakes,
Natural and Man-Made
1991 Water Quality Part 6: Sampling Section
6.5: Guidance on Sampling of Drinking
Water and Water Used for Food and
Beverage Processing (ISO 5667-5: 1991)
1991 Water Quality Part 6: Sampling Section
6.6: Guidance on Sampling of Rivers and
Streams (ISO 5667-6: 1990)
1994 Water Quality Part 6: Sampling Section
6.7: Guidance on Sampling of Water and
Steam in Boiler Plants (ISO 5667-7: 1993)
(Replaces BS 1328: 1969 and BS 3285:
1960) (N)
1993 Water Quality Part 6: Sampling Section
6.8: Guidance on Sampling of Wet
Deposition (ISO 5667-8: 1993)
1993 Water Quality Part 6: Sampling Section
6.9: Guidance on Sampling from Marine
BS 6068 SECTION 5.19
BS 6068 SECTION 5.2
BS 6068 SECTION 5.20
BS 6068 SECTION 5.21
BS 6068 SECTION 5.3
BS 6068 SECTION 5.4
BS 6069 PART 1
BS 6069 PART 1
BS 6069 PART 2
BS 6069 PART 2
BS 6069 SEC 3.1
BS 6069 SEC 3.2
Waters (ISO 5667-9: 1992)
1996 Water Quality - Pseudomonas Putida
Growth Inhibition Test (Pseudomonas Cell
Multiplication Inhibition Test) Also
Numbered as BS EN ISO 10712: 1996; (N)
1998 Water Quality - Determination of the
Acute Lethal Toxicity of Substances to a
Fresh Water Fish [Brachydanio Rerio
Hamilton-Buchanan (Teleostei, Cyprinidae)]
- Static Method Also Known as BS EN ISO
7346-1: 1998; (N)
1996 Amd 1 Water Quality - Evaluation of
the Elimination and Biodegradability of
Organic Compounds in an Aqueous Medium
- Activated Sludge Simulation Test AMD
10320; January 15, 1999; Renumbered as BS
EN ISO 11733: 1998; (N)
1996 Amd 1 Water Quality - Evaluation of
the
1998 Water Quality - Determination of the
Acute Lethal Toxicity of Substances to a
Fresh Water Fish [Brachydanio Rerio
Hamilton-Buchanan (Teleostei, Cyprinidae)]
- Semi-Static Method Also Known as BS EN
ISO 7346-2: 1998; (N)
1998 Water Quality - Determination of the
Acute Lethal Toxicity of Substances to a
Fresh Water Fish [Brachydanio Rerio
Hamilton-Buchanan (Teleostei, Cyprinidae)]
- Flow-Through Method Also Known as BS
EN ISO 7346-3: 1998; (N)
1994 Characterization of Air Quality Part 1:
Units of Measurement (ISO 4226: 1993) (N)
1981 Characterization of Air Quality Part 1:
Units of Measurement
1994 Characterization of Air Quality Part 2:
Glossary (ISO 4225: 1994) (N)
1983 Characterization of Air Quality Part 2:
Glossary
1989 Characterization of Air Quality Part 3:
Workplace Atmospheres Section 3.1: Method
for the Determination of Vinyl Chloride
Using a Charcoal Tube and a Gas
Chromatograph
1991 Characterization of Air Quality Part 3:
Workplace Atmospheres Section 3.2: Method
BS 6069 SEC 3.5
BS 6069 SEC 3.6
BS EN 449
BS EN 450
BS EN 45010
BS EN 45011
BS EN 45012
BS EN 45014
BS EN 451-2
BS EN 453
BS EN 454
BS EN 455-3
BS EN 45502-1
for the Determination of Particulate Lead and
Lead Compounds by Flame Atomic
Absorption Spectrometry (ISO 8518: 1990)
1993 Workplace Atmospheres - Size Fraction
Definitions for Measurement of Airborne
Particles (See BS EN 481) (N)
1994 Workplace Atmospheres - General
Requirements for the Performance of
Procedures for the Measurement of Chemical
Agents (See BS EN 482) (N)
1997 Amd 1 Dedicated Liquefied Petroleum
Gas Appliances - Domestic Flueless Space
Heaters (Including Diffusive Catalytic
Combustion Heaters) AMD 9833; December
1997; Supersedes BS 5258: Part 10: and BS
5258: Part 11; (L)
1995 Fly Ash for Concrete - Definitions,
Requirements and Quality Control (R)
1998 General Requirements for Assessment
and Accreditation of Certification Systems
(G)
1998 General Requirements for Bodies
Operating Product Certification Systems
Revision of BS 7511: 1989; (H)
1998 General Requirements for Bodies
Operating Assessment and
Certification/Registration of Quality Systems
Revision of BS 7512:1989 (G)
1998 General Criteria for Supplier's
Declaration of Conformity Supersedes BS
7514: 1989; (G)
1995 Method of Testing Fly Ash Part 2:
Determination of Fineness by Wet Sieving
(R)
2000 Food Processing Machinery - Dough
Mixers - Safety and Hygiene Requirements
(F)
2000 Food Processing Machinery - Planetary
Mixers - Safety and Hygiene Requirements
(F)
2000 Medical Gloves for Single Use - Part 3:
Requirements and Testing for Biological
Evaluation Together with BS EN 455-1 and 2, Supersedes BS 4005: 1996; (N)
1998 Active Implantable Medical Devices
Part 1: General Requirements for Safety,
BS EN 45503
BS EN 45510-1
BS EN 45510-2-2
BS EN 45510-2-3
BS EN 45510-2-4
BS EN 45510-2-4
BS EN 45510-2-6
BS EN 45510-3-1
BS EN 45510-3-2
BS EN 45510-3-3
BS EN 45510-4-1
BS EN 45510-4-10
BS EN 45510-4-2
Marking and Information to be Provided by
the Manufacturer (N)
1996 Attestation Standard for the Assessment
of Contract Award Procedures of Entities
Operating in the Water, Energy, Transport
and Telecommunication Sectors (G)
1998 Guide for Procurement of Power
Station Equipment Part 1: Common Clauses
(Q)
1999 Guide for Procurement of Power
Station Equipment - Part 2: Electrical
Equipment - Section 2: Uninterruptible
Power Supplies (Q)
2000 Guide for Procurement of Power
Station Equipment - Part 2-3: Electrical
Equipment - Stationary Batteries and
Chargers (Q)
2000 Guide for Procurement of Power
Station Equipment - Part 2-4: Electrical
Equipment - High Power Static Convertors
(Q)
2000 Corr 1 Guide for Procurement of Power
Station Equipment - Part 2-4: Electrical
Equipment - High Power Static Convertors
CORR 11040; August 2000; (Q)
2000 Guide for Procurement of Power
Station Equipment - Part 2-6: Electrical
Equipment - Generators (Q)
2000 Guide for Procurement of Power
Station Equipment - Part 3-1: Boilers - Water
Tube Boilers (Q)
2000 Guide for Procurement of Power
Station Equipment - Part 3-2: Boilers - Shell
Boilers (Q)
2000 Guide for Procurement of Power
Station Equipment - Part 3-3: Boilers Boilers with Fluidized Bed Firing (Q)
1999 Guide for Procurement of Power
Station Equipment - Part 4: Boiler
Auxiliaries - Section 1: Equipment for
Reduction of Dust Emissions (Q)
2000 Guide for Procurement of Power
Station Equipment - Part 4-10: Boiler
Auxiliaries - Flue Gas Dentification (DeNOx) Plant (Q)
1999 Guide for Procurement of Power
BS EN 45510-4-3
BS EN 45510-4-6
BS EN 45510-4-7
BS EN 45510-4-8
BS EN 45510-4-9
BS EN 45510-5-1
BS EN 45510-5-2
BS ISO/IEC ISP 10609-10
BS ISO/IEC ISP 10609-11
BS ISO/IEC ISP 10609-11
Station Equipment - Part 4: Boiler
Auxiliaries - Section 2: Gas-Air, Steam-Air
and Gas-Gas Heaters (Q)
1999 Guide for Procurement of Power
Station Equipment - Part 4: Boiler
Auxiliaries - Section 3: Draught Plant (Q)
1999 Guide for Procurement of Power
Station Equipment - Part 4: Boiler
Auxiliaries - Section 6: Flue Gas
Desulfurization (De-SOx) Plant (Q)
1999 Guide for Procurement of Power
Station Equipment - Part 4: Boiler
Auxiliaries - Section 7: Ash Handling Plant
(Q)
2000 Guide for Procurement of Power
Station Equipment - Part 4-8: Boiler
Auxiliaries - Dust Handling Plant (Q)
2000 Guide for Procurement of Power
Station Equipment - Part 4-9: Boiler
Auxiliaries - Sootblowers (Q)
1998 Guide for Procurement of Power
Station Equipment - Part 5-1: Steam Turbines
(Q)
1998 Guide for Procurement of Power
Station Equipment - Part 5-2: Gas Turbines
(Q)
1994 Amd 1 Information Technology International Standardized Profiles TB, TC,
TD and TE - Connection-Mode Transport
Service over Connection-Mode Network
Service Part 10: LAN SubnetworkDependent, Media-Independent
Requirements AMD 9580 May 1997;
Renumbe
1994 Information Technology - International
Standardized Profiles TB, TC, TD and TE Connection-Mode Transport Service over
Connection-Mode Network Service Part 11:
CSMA/CD Subnetwork-Dependent, MediaDependent Requirements Renumbered as BS
EN ISP 106091994 Amd 1 Information Technology International Standardized Profiles TB, TC,
TD and TE - Connection-Mode Transport
Service over Connection-Mode Network
Service Part 11: CSMA/CD Subnetwork-
BS ISO/IEC ISP 10609-12
BS ISO/IEC ISP 10609-12
BS ISO/IEC ISP 10609-12
BS ISO/IEC ISP 10609-14
BS ISO/IEC ISP 10609-14
BS ISO/IEC ISP 10612-1
BS ISO/IEC ISP 10612-2
Dependent, Media-Dependent Requirements
AMD 9579 May 1997; Renum
1994 Information Technology - International
Standardized Profiles TB, TC, TD and TE Connection-Mode Transport Service Over
Connection-Mode Network Service Part 12:
Definition of Profile TC51, Provision of the
OSI Connection-Mode Network Service in an
En
1994 Amd 1 Information Technology International Standardized Profiles TB, TC,
TD and TE - Connection-Mode Transport
Service Over Connection-Mode Network
Service Part 12: Definition of Profile TC51,
Provision of the OSI Connection-Mode
Transport Service
1994 Amd 2 Information Technology International Standardized Profiles TB, TC,
TD and TE - Connection-Mode Transport
Service over Connection-Mode Network
Service Part 12: Definition of Profile TC51,
Provision of the OSI Connection-Mode
Transport Service
1994 Information Technology - International
Standardized Profiles TB, TC, TD and TE Connection-Mode Transport Service over
Connection-Mode Network Service - Part 14:
Definition of Profile TC53, Provision of the
OSI Connection-Mode Transport Service
Usin
1994 Amd 1 Information Technology
International Standardized Profiles TB, TC,
TD and TE - Connection-Mode Transport
Service over Connection-Mode Network
Service Part 14: Definition of Profile TC53,
Provision of the OSI Connection-Mode
Transport Service Us
1995 Information Technology - International
Standardized Profile RD - Relaying the MAC
Service Using Transparent Bridging Part 1:
Subnetwork-Independent Requirements (S)
1995 Information Technology - International
Standardized Profile RD - Relaying the MAC
Service Using Transparent Bridging Part 2:
CSMA/CD LAN Subnetwork-Dependent,
Media-Dependent Requirements (S)
BS ISO/IEC 9506-1
BS ISO/IEC 9541-2
BS ISO/IEC 9541-3
BS ISO/IEC 9545
BS ISO/IEC 9545
BS ISO/IEC 9506-3
BS ISO/IEC 9529-1
BS ISO/IEC 9529-1
BS ISO/IEC 9529-2
BS ISO/IEC 9548-1
BS ISO/IEC 9548-2
1990 Amd 1 Industrial Automation Systems Manufacturing Message Specification - Part
1: Service Definition (AMD 7991) November
15, 1993 (Renumbered as BS EN 29506-1:
1995) (S)
1991 Amd 2 Information Technology - Font
Information Interchange - Part 2: Interchange
Format (AMD 8921) November 15, 1995
(Technical Corr 2) (S)
1994 Information Technology - Font
Information Interchange - Part 3: Glyph
Shape Representation (S)
1994 Information Technology - Open
Systems Interconnection - Application Layer
Structure (S)
1989 Information Technology - Open
Systems: Interconnection - Application Layer
Structure
1991 Amd 1 Industrial Automation Systems Manufacturing Message Specification - Part
3: Companion Standard for Robotics (AMD
8104) May 15, 1994 (Technical Corr 1) (S)
1989 Information Processing Systems - Data
Interchange on 90 mm (3,5 in) Flexible Disk
Cartridges Using Modified Frequency
Modulation Recording at 15 916 ftprad, on
80 Tracks on Each Side Part 1: Dimensional,
Physical and Magnetic
1989 Amd 1 Information Processing Systems
- Data Interchange on 90 mm (3,5 in)
Flexible Disk Cartridges Using Modified
Frequency Modulation Recording at 15 916
ftprad, on 80 Tracks on Each Side Part 1:
Dimensional, Physical and Magnetic
Characteristics (A
1989 Amd 1 Information Processing Systems
- Data Interchange on 90 mm (3,5 in)
Flexible Disk Cartridges Using Modified
Frequency Modulation Recording at 15 916
ftprad, on 80 Tracks on Each Side Part 2:
Track Format (AMD 7041) June 15, 1992
1996 Information Technology - Open
Systems Interconnection - Connectionless
Session Protocol: Protocol Specification (S)
1995 Information Technology - Open
Systems Interconnection - Conncetionless
BS ISO/IEC 9549
BS ISO/IEC TR 9573-11
BS ISO/IEC TR 9573-13
BS ISO/IEC 9574
BS ISO/IEC 9574
BS ISO/IEC 9576-1
BS ISO/IEC 9576-2
BS ISO/IEC TR 9577
BS ISO/IEC TR 9577
BS ISO/IEC TR 9578
BS ISO/IEC 9594-1
Session Protocol: Protocol Implementation
Conformance Statement (PICS) Proforma (S)
1990 Information Technology - Galvanic
Isolation of Balanced Interchange Circuits
1992 Information Processing - SGML
Support Facilities - Techniques for Using
SGML - Part 11: Application at ISO Central
Secretariat for International Standards and
Technical Reports
1991 Information Technology - SGML
Support Facilities - Techniques for Using
SGML - Part 13: Public Entity Sets for
Mathematics and Science
1992 Information Technology - Provision of
the OSI Connection-Mode Network Service
by Packet Mode Terminal Equipment to an
Integrated Services Digital Network (ISDN)
(S)
1989 Information Technology Telecommunications and Information
Exchange Between Systems - Provision of
the OSI Connection-Mode Network Service
by Packet Mode Terminal Equipment
Connected to an Intergrated Services Digital
Network (ISDN)
1995 Information Technology - Open
Systems Interconnection - Connectionless
Presentation Protocol: Protocol Specification
Supersedes BS ISO/IEC 9576:1991 (S)
1995 Information Technology - Open
Systems Interconnection - Connectionless
Presentation Protocol: Protocol
Implementation Conformance Statement
(PICS) Proforma (S)
1996 Information Technology - Protocol
Identification in the Network Layer (S)
1990 Information Technology Telecommunications and Information
Exchange Between Systems - Protocol
Identification in the Network Layer
1990 Information Technology Communication Interface Connectors Used
in Local Area Networks
1995 Information Technology - Open
Systems Interconnection - the Directory:
Overview of Concepts, Models, and Services
BS ISO/IEC 9594-1
BS ISO/IEC 9579
BS ISO/IEC 9592 PART 4
BS ISO/IEC 9592-4
BS ISO/IEC 9592-4
BS ISO/IEC 9593 PART 1
BS ISO/IEC 9593 PART 1
BS ISO/IEC 9593 PART 1
BS ISO/IEC 9593 PART 3
(S)
(WITHDAWN) 1990 Information
Technology - Open Systems Interconnection
- the Directory - Part 1: Overview of
Concepts, Models, and Services (S)
2000 Information Technology - Remote
Database Access for SQL with Security
Enhancement Supersedes BS ISO/IEC 95791:1993, BS ISO/IEC 9579-2:1998 and BS
ISO/IEC 9579-3:1996; (S)
1992 Information Processing Systems Computer Graphics - Programmer's
Hierarchical Interactive Graphics System
(PHIGS) Part 4: Plus Lumiere und Surfaces,
PHIGS PLUS
1992 Amd 1 Information Processing Systems
- Computer Graphics - Programmer's
Hierarchical Interactive Graphics System
(PHIGS) Part 4: Plus Lumiere und Surfaces,
PHIGS PLUS (AMD 8459) March 15, 1995
(Technical Corr 1) (S)
1992 Amd 1 Information Processing Systems
- Computer Graphics - Programmer's
Hierarchical Interactive Graphics System
(PHIGS) Part 4: Plus Lumiere und Surfaces,
PHIGS PLUS AMD 9469; May 15, 1997;
Technical Corr 1; Renumbered as BS EN
ISO/IEC 9592-4:1997 (
1990 Information Technology - Computer
Graphics - Programmers Hierarchical
Interactive Graphics System (PHIGS)
Language Bindings Part 1: FORTRAN
1990 Amd 1 Information Processing Systems
- Computer Graphics - Programmer's
Hierarchical Interactive Graphics System
(PHIGS) Language Bindings Part 1: Fortran
(AMD 8815) October 15, 1995 (S)
1990 Amd 2 Information Processing Systems
- Computer Graphics - Programmer's
Hierarchical Interactive Graphics System
(PHIGS) Language Bindings Part 1: Fortran
(AMD 8470) March 15, 1995 (Technical
Corr 2) (S)
1990 Information Technology - Computer
Graphics - Programmers Hierarchical
Interactive Graphics System (PHIGS)
BS ISO/IEC 9593 PART 3
BS ISO/IEC 9593 PART 3
BS ISO/IEC 9593 PART 3
BS ISO/IEC 9594-2
BS ISO/IEC 9594-3
BS ISO/IEC 9594-4
BS ISO/IEC 9594-5
BS ISO/IEC 9594-6
BS ISO/IEC 9594-7
BS ISO/IEC 9594-8
BS ISO/IEC 9594-9
BS ISO/IEC 9595
BS ISO/IEC 9595
Language Bindings 9593/3: Ada
1990 Amd 1 Information Technology Computer Graphics - Programmer's
Hierarchical Interactive Graphics System
(PHIGS) Language Bindings Part 3: Ada
(AMD 8385) May 15, 1995 (S)
1990 Amd 1 Information Technology Computer Graphics - Programmer's
Hierarchical Interactive Graphics System
(PHIGS) Language Bindings Part 3: Ada
(AMD 8030) December 15, 1993 (Technical
Corr 1) (S)
1990 Amd 2 Information Technology Computer Graphics - Programmer's
Hierarchical Interactive Graphics System
(PHIGS) Language Bindings Part 3: Ada
(AMD 8469) March 15, 1995 (Technical
Corr 2) (S)
1995 Information Technology - Open
Systems Interconnection - The Directory:
Models (S)
1995 Information Technology - Open
Systems Interconnection - The Directory:
Abstract Service Definition (S)
1995 Information Technology - Open
Systems Interconnection - the Directory:
Procedures for Distributed Operation (S)
1995 Information Technology - Open
Systems Interconnection - the Directory:
Protocol Specifications (S)
1995 Information Technology - Open
Systems Interconnection - the Directory:
Selected Attribute Types (S)
1995 Information Technology - Open
Systems Interconnection - the Directory:
Selected Object Classes (S)
1995 Information Technology - Open
Systems Interconnection - the Directory:
Authentication Framework (S)
1995 Information Technology - Open
Systems Interconnection - The Directory :
Replication (S)
1991 Information Technology - Open
Systems Interconnection - Common
Management Information Service Definition
1991 Amd 1 Information Technology - Open
BS ISO/IEC 9595
BS ISO/IEC 9595
BS ISO/IEC 9636-1
BS ISO/IEC 9636-2
BS ISO/IEC 9636-3
BS ISO/IEC 9636-4
BS ISO/IEC 9636-5
BS ISO/IEC 9636-6
Systems Interconnection - Common
Management Information Service Definition
(AMD 7306) September 15, 1992 (Technical
Corr 1) (S)
1991 Amd 3 Information Technology - Open
Systems Interconnection - Common
Management Information Service Definition
(AMD 8334) January 15, 1995 (Technical
Corr 3) (S)
1991 Amd 4 Information Technology - Open
Systems Interconnection - Common
Management Information Service Definition
(AMD 7476) November 15, 1992
1991 Information Technology - Computer
Graphics - Interfacing Techniques for
Dialogues with Graphical Devices (CGI) Functional Specification - Part 1: Overview,
Profiles, and Conformance
1991 Information Technology - Computer
Graphics - Interfacing Techniques for
Dialogues with Graphical Devices (CGI) Functional Specification - Part 2: Control
(Read in Conjunction with ISO/IEC 9636-1)
1991 Information Technology - Computer
Graphics - Interfacing Techniques for
Dialogues with Graphical Devices (CGI) Functional Specification - Part 3: Output
(Read in Conjunction with ISO/IEC 9636-1
and ISO/IEC 9636-2)
1991 Information Technology - Computer
Graphics - Interfacing Techniques for
Dialogues with Graphical Devices (CGI) Functional Specification - Part 4: Segments
(Read in Conjunction with ISO/IEC 9636-1,
ISO/IEC 9636-2 and ISO/IEC 9636-3) (S)
1991 Information Technology - Computer
Graphics - Interfacing Techniques for
Dialogues with Graphical Devices (CGI) Functional Specification - Part 5: Input and
Echoing (Read in Conj with ISO/ IEC 9636-2
and ISO/IEC 9636-4)
1991 Information Technology - Computer
Graphics - Interfacing Techniques for
Dialogues with Graphical Devices (CGI) Functional Specification - Part 6: Raster
(Read in Conj with ISO /IEC 9636-
BS ISO/IEC 9637-1
BS ISO/IEC 9637-2
BS ISO/IEC 9638-3
BS ISO/IEC 9797
BS ISO/IEC 9798-5
BS ISO/IEC 9899
BS ISO/IEC TR 10000-1
BS ISO/IEC 9646-1
BS ISO/IEC 9646-1
BS ISO/IEC 9646-1
BS ISO/IEC 9646-3
1,ISO/IEC 9636 -2and ISO/IEC 9636-3)
1994 Information Technology - Computer
Graphics - Interfacing Techniques for
Dialogues with Graphical Devices (CGI) Data Stream Binding - Part 1: Character
Encoding (S)
1992 Information Technology - Computer
Graphics - Interfacing Techniques for
Dialogues with Graphical Devices (CGI) Data Stream Binding - Part 2: Binary
Encoding (S)
1994 Information Technology - Computer
Graphics - Interfacing Techniques for
Dialogues with Graphical Devices (CGI) Language Bindings Part 3: Ada (S)
1990 Data Cryptographic Techniques - Data
Integrity Mechanism Using a Cryptographic
Check Function Employing a Block Cipher
Algorithm
1999 Information Technology - Security
Techniques - Entity Authentication - Part 5:
Mechanisms Using Zero Knowledge
Techniques (S)
1999 Corr 1 Programming Languages - C
CORR 13511: November 30, 2001;
Supersedes BS EN 29899: 1993; (S)
1990 Framework
1991 Information Technology - Open
Systems Interconnection - Conformance
Testing Methodology and Framework - Part
1: General Concepts (Renumbered as BS EN
29646-1) (S)
1991 Amd 0 Information Technology - Open
Systems Interconnection - Conformance
Testing Methodology and Framework - Part
1: General Concepts (AMD 7301) November
15, 1992 (Renumbered as BS EN 29646-1)
1991 Amd 1 Information Technology - Open
Systems Interconnection - Conformance
Testing Methodology and Framework - Part
1: General Concepts (AMD 8332) January
15, 1995 (Technical Corr 1) (Renumbered as
BS EN 29646-1) (S)
1998 Information Technology - Open
Systems Interconnection - Conformance
Testing Methodology and Framework - Part
BS ISO/IEC 9646-3
BS ISO/IEC 9646-5
BS ISO/IEC 9646-5
BS ISO/IEC 9646-5
BS ISO/IEC 9797
BS ISO/IEC 9798-2
BS ISO/IEC 9805-1
BS ISO/IEC 9805-2
3: The Tree and Tabular Combined Notation
(TTCN) Supersedes BS EN 29646-3: 1994;
(S)
1992 Information Technology - Open
Systems Interconnection - Conformance
Testing Methodology and Framework - Part
3: the Tree and Tabular Combined Notation
(TTCN) ( See BS EN 29646-3; (S)
1991 Information Technology - Open
Systems Interconnection - Conformance
Testing Methodology and Framework - Part
5: Requirements on Test Laboratories and
Clients for the Conformance Assessment
Process
1991 Amd 0 Information Technology - Open
Systems Interconnection - Conformance
Testing Methodology and Framework - Part
5: Requirements on Test Laboratories and
Clients for the Conformance Assessment
Process (AMD 7304) November 15, 1992
(Renumbered as BS
1991 Amd 1 Information Technology - Open
Systems Interconnection - Conformance
Testing Methodology and Framework - Part
5: Requirements on Test Laboratories and
Clients for the Conformance Assessment
Process (AMD 8333) January 15, 1995
(Technical Corr 1)
1994 Information Technology - Security
Techniques - Data Integrity Mechanism
Using a Cryptographic Check Function
Employing a Block Cipher Algorithm (S)
1999 Information Technology - Security
Techniques - Entity Authentication - Part 2:
Mechanisms Using Symmetric Encipherment
Algorithms Second Edition; (S)
1998 Information Technology - Open
Systems Interconnection - Protocol for the
Commitment, Concurrency and Recovery
Service Element - Part 1: Protocol
Specification (T)
1996 Information Technology - Open
Systems Interconnection - Protocol for the
Commitment, Concurrency and Recovery
Service Element: Protocol Implementation
Conformance Statement (PICS) Proforma (S)
BS ISO/IEC 9945-1
BS ISO/IEC 11756
BS ISO/IEC 13250
BS ISO/IEC 9973
BS ISO/IEC 9979
BS ISO/IEC 9945-2
BS ISO/IEC 9983
BS ISO/IEC 9983
BS ISO/IEC TR 10000-1
BS ISO/IEC TR 10000-2
BS ISO/IEC TR 10000-2
BS ISO/IEC 10021-2
BS ISO/IEC 10021-2
1990 Information Technology - Portable
Operating System Interface (POSIX) - Part 1:
System Application Program Interface (API)
(C Language) (Renumbered as BS EN
29945-1: 1990)
1999 Information Technology Programming Languages - M (S)
2000 Information Technology - SGML
Applications - Topic Maps (S)
1994 Information Technology - Computer
Graphics and Image Processing - Procedures
for Registration of Graphical Items (Replaces
DD 182: 1990) (T)
1999 Information Technology - Security
Techniques - Procedures for the Registration
of Cryptographic Algorithms (S)
1993 Information Technology - Portable
Operating System Interface (POSIX) Part 2:
Shell and Utilities (Renumbered as BS EN
ISO/IEC 9945-2: 1995) (S)
1989 Information Processing Systems Designation of Unrecorded Flexible Disk
Cartridges (S)
1989 Amd 1 Information Processing Systems
- Designation of Unrecorded Flexible Disk
Cartridges (AMD 6862) October 31, 1991
1995 Information Technology - Framework
and Taxonomy of International Standardized
Profiles - Part 1: General Principles and
Documentation Framework (S)
1995 Information Technology - Framework
and Taxonomy of International Standardized
Profiles Part 2: Principles and Taxonomy for
OSI Profiles (S)
1992 Information Technology - Framework
and Taxonomy of International Standardized
Profiles - Part 2: Taxonomy of OSI Profiles
(S)
1996 Amd 1 Information Technology Message Handling Systems (MHS): Overall
Architecture AMD 9924; February, 1998; (S)
1990 Amd 1 Information Technology - Text
Communication - Message-Oriented Text
Interchange Systems (MOTIS) - Part 2:
Overall Architecture (AMD 6847) September
30, 1991
BS ISO 18918
BS ISO 18919
BS ISO 18920
BS ISO 18928
BS ISO 80416-2
BS ISO/IEC 646
BS ISO/IEC 2382-7
BS ISO/IEC 646
BS ISO/IEC 1539-1
BS ISO/IEC 1539-2
BS ISO/IEC 1539-3
BS ISO/IEC 1539-3
BS ISO/IEC 2022
BS ISO/IEC 2382-1
BS ISO/IEC 2382-20
BS ISO/IEC 1863
2000 Imaging Materials - Processed
Photographic Plates - Storage Practices
Supersedes BS ISO 3897: 1997; (H)
1999 Photography - Thermally Processed
Silver Microfilm - Specifications for Stability
(H)
2000 Imaging Materials - Processed
Photographic Reflection Prints - Storage
Practices Supersedes BS ISO 6051:1997; (H)
2002 Imaging Materials - Unprocessed
Photographic Films and Papers - Storage
Practices (H)
2001 Basic Principles for Graphical Symbols
for Use on Equipment - Part 2: Form and Use
of Arrows (G)
1991 Information Technology - ISO 7-Bit
Coded Character Set for Information
Interchange
1989 Computer Programming
1991 Amd 1 Information Technology - ISO
7-Bit Coded Character Set for Information
Interchange (AMD 7619) February 15, 1993
(Replaces BS 4730: 1985)
1997 Information Technology Programming Languages - Fortran - Part 1:
Base Language Supersedes BS EN
21539:1992; (S)
2000 Information Technology Programming Languages - Fortran - Part 2:
Varying Length Character Strings (S)
1999 Corr 1 Information Technology Programming Languages - Fortran - Part 3:
Conditional Compilation CORR 13696:
February 25, 2002; (S)
(FAULTY STANDARD) 1999 Information
Technology - Programming Languages Fortran - Part 3: Conditional Compilation (S)
1994 Information Technology - Character
Code Structure and Extension Techniques
(Replaces BS 6856: 1987) (S)
1993 Information Technology - Vocabulary Part 1: Fundamental Terms (S)
1990 Information Technology - Vocabulary Part 20: Systems Development
1990 Information Processing - 9-Track, 12,7
mm (0,5 in) Wide Magnetic Tape for
BS ISO/IEC 2382-25
BS ISO/IEC 2382-26
BS ISO/IEC 15437
G 133
BS ISO/IEC 3309
BS ISO/IEC 3309
BS ISO/IEC 3788
BS ISO/IEC 4335
BS ISO/IEC 4873
BS ISO/IEC 6429
BS ISO/IEC 6522
BS ISO/IEC 6523-1
S 138
Information Interchange Using NRZI at 32
ftpmm (800 ftpi) - 32 cpmm (800 cpi)
1992 Information Technology - Vocabulary Part 25: Local Area Networks
1993 Information Technology - Vocabulary Part 26: Open Systems Interconnection (S)
2001 Information Technology - Enhancments
to LOTOS (E-LOTOS) (S)
1951 Amd 1 Electro-Magnetic Indicators for
Extra Low Voltage Aircraft Systems
1991 Information Technology Telecommunications and Information
Exchange Between Systems - High-Level
Data Link Control (HDLC) Procedures Frame Structure
1991 Amd 1 Information Technology Telecommunications and Information
Exchange Between Systems - High-Level
Data Link Control (HDLC) Procedures Frame Structure (AMD 7171) July 15, 1992
1990 Information Processing - 9-Track,
12,7mm (0, 5in) Wide Magnetic Tape for
Information Interchange Using Phase
Encoding at 126 ftpmm (3 200 ftpi) - 63
cpmm (1 600 cpi)
1991 Information Technology Telecommunications and Information
Exchange Between Systems - High-Level
Data Link Control (HDLC) Procedures Elements of Procedures
1991 Information Technology - ISO 8-Bit
Code for Information Interchange - Structure
and Rules for Implementation (Replaces BS
6006: 1987)
1992 Information Technology - Control
Functions for Coded Character Sets
(Supersedes BS 7204: 1989) (S)
1992 Information Technology Programming Languages - PL/I General
Purpose Subset (S)
1998 Information Technology - Structure for
the Identification of Organizations and
Organization Parts - Part 1: Identification of
Organization Identification Schemes (S)
(OBSOLESCENT) 1967 3 Per Cent
Chromium- Molybdenum-Vanadium Steel
S 141
BS ISO/IEC 6523-2
BS ISO/IEC 6592
BS ISO/IEC 7350
BS ISO/IEC 7480
BS ISO/IEC 7498-3
BS ISO/IEC 7501-3
BS ISO/IEC 7812-1
BS ISO/IEC 7809
BS ISO/IEC 7812-2
BS ISO/IEC 7813
BS ISO/IEC 7816-2
BS ISO/IEC 7816-7
(OBSOLESCENT) 1968 12 Per Cent
Chromium Corrosion-Resisting Steel
1998 Information Technology - Structure for
the Identification of Organizations and
Organization Parts - Part 2: Registration of
Organization Identification Schemes (S)
2000 Information Technology - Guidelines
for the Documentation of Computer-Based
Application Systems (Revision of ISO
6592:1985) Supersedes BS 5515:1984; (S)
1991 Information Technology - Registration
of Repertoires of Graphic Characters from
ISO/IEC 10367
1991 Information Technology Telecommunications and Information
Exchange Between Systems - Start-Stop
Transmission Signal Quality at DTE/DCE
Interfaces (Replaces BS 6638: Part 1: 1987)
1997 Information Technology - Open
Systems Interconnection - Basic Reference
Model: Naming and Addressing (S)
1997 Identification Cards - Machine
Readable Travel Documents Part 3: Machine
Readable Official Travel Documents (S)
Faulty Standard 2000 Identification Cards Identification of Issuers - Part 1: Numbering
System (S)
1991 Amd 7 Information Technology Telecommunications and Information
Exchange Between Systems - High-Level
Data Link Control (HDLC) Procedures Classes of Procedures
Faulty Standard 2000 Identification Cards Identification of Issuers - Part 2: Application
and Registration Procedures (S)
2001 Identification Cards - Financial
Transaction Cards Supersedes BS EN
ISO/IEC 7813:1996; (S)
1999 Information Technology - Identification
Cards - Integrated Circuit(s) Cards with
Contacts - Part 2: Dimensions and Location
of the Contacts (S)
1999 Identification Cards - Integrated
Circuit(s) Cards with Contacts - Part 7:
Interindustry Commands for Structured
Cards Query Language (SCQL) (S)
BS ISO/IEC 7816-8
BS ISO/IEC 7816-9
BS ISO/IEC 7816-10
BS ISO/IEC 7942-2
BS ISO/IEC 7942-3
BS ISO/IEC 8072
BS ISO/IEC 8208
BS ISO/IEC 8208
BS ISO/IEC 8211
BS ISO/IEC 8326
BS ISO/IEC 8326
BS ISO/IEC 8327-1
BS ISO/IEC 8327-2
1999 Identification Cards - Integrated
Circuit(s) Cards with Contacts - Part 8:
Security Related Interindustry Commands (S)
2000 Identification Cards - Integrated
Circuit(s) Cards with Contracts - Part 9:
Additional Interindustry Commands and
Security Attributes (S)
2000 Identification Cards - Integrated
Circuit(s) Cards with Contacts - Part 10:
Electronic Signals and Answer to Reset for
Synchronous Cards (S)
1997 Information Technology - Computer
Graphics and Image Processing - Graphical
Kernel System (GKS) Part 2: NDC Metafile
(S)
1999 Information Technology - Computer
Graphics and Image Processing - Graphical
Kernel Systems (GKS) Part 3: Audit Trail (S)
1994 Information Technology - Open
Systems Interconnection - Transport Service
Definition (Replaces BS 7218: 1990) (S)
1990 Information Technology - Data
Communications - X.25 Packet Layer
Protocol for Data Terminal Equipment
1990 Amd 3 Information Technology - Data
Communications - X.25 Packet Layer
Protocol for Data Terminal Equipment
(AMD 8038) January 15, 1994 (S)
1994 Information Technology - Specification
for a Data Descriptive File for Information
Interchange (Replaces BS 6690: 1986) (S)
1996 Information Technology - Open
Systems Interconnection - Session Service
Definition Supersedes BS 6960: 1988; (S)
1996 Amd 1 Information Technology - Open
Systems Interconnection - Session Service
Definition AMD 10491; August 1999;
Supersedes BS 6960:1988; (S)
1996 Information Technology - Open
Systems Interconnection - ConnectionOriented Session Protocol: Protocol
Specification Supersedes BS 6961: 1988; (S)
1996 Information Technology - Open
Systems Interconnection - ConnectionOriented Session Protocol: Protocol
Implementation Conformance Statement
BS ISO/IEC 8859-9
BS ISO/IEC 8859-14
BS ISO/IEC 8859-15
BS ISO/IEC 8473-3
BS ISO/IEC 8473-4
BS ISO/IEC 8473-5
BS ISO/IEC 8480
BS ISO/IEC 8481
BS ISO/IEC 8880-2
BS ISO/IEC 8882-2
(PICS) Proforma (S)
1999 Information Technology - 8-Bit SingleByte Coded Graphic Character Sets - Part 9:
Latin Alphabet No.5 (S)
1998 Information Technology - 8-bit SingleByte Coded Graphic Character Sets - Part 14:
Latin Alphabet No. 8 (Celtic) (S)
1999 Information Technology - 8-Bit SingleByte Coded Graphic Character Sets - Part 15:
Latin Alphabet No. 9 (S)
1995 Information Technology - Protocol for
Providing the Connectionless-Mode Network
Service: Provision of the Underlying Service
by an X.25 Subnetwork (S)
1995 Information Technology - Protocol for
Providing the Connectionless-Mode Network
Service: Provision of the Underlying Service
by a Subnetwork That Provides the OSI Data
Link Service (S)
1997 Information Technology - Protocol for
Providing the Connectionless-Mode Network
Service Part 5: Provision of the Underlying
Service by ISDN Circuit-Switched BChannels (S)
1995 Information Technology Telecommunications and Information
Exchange Between Systems - DTE/DCE
Interface Back- Up Control Operation Using
ITU-T Recommendation V.24 Interchange
Circuits (Replaces BS 6639: 1990) (S)
1996 Information Technology Telecommunications and Information
Exchange between Systems - DTE to DTE
Direct Connections Supersedes BS 6640: Part
1: 1987 and BS 6640: Part 2: 1987; (S)
1990 Information Technology Telecommunications and Information
Exchange Between Systems - Protocol
Combinations to Provide and Support the
OSI Network Service - Part 2: Provision and
Support of the Connection-Mode Network
Service
1995 Information Technology Telecommunications and Information
Exchange Between Systems - X.25 DTE
Conformance Testing - Part 2: Data Link
BS ISO/IEC 8882-2
BS ISO/IEC 8882-3
BS ISO/IEC 8885
BS ISO/IEC 9040
BS ISO/IEC 9041-1
BS ISO/IEC 9041-2
BS ISO/IEC 9066-3
BS ISO/IEC 9496
BS ISO/IEC 9529-2
BS ISO/IEC 9899
BS ISO/IEC 9075-10
BS ISO/IEC 9126-1
BS ISO/IEC 9281/1
BS ISO/IEC 9281-2
Layer Conformance Test Suite (S)
1992 Information Technology Telecommunications and Information
Exchange Between Systems - X.25 DTE
Conformance Testing - Part 2: Data Link
Layer Conformance Test Suite
1991 Information Technology Telecommunications and Information
Exchange Between Systems - X.25-DTE
Conformance Testing - Part 3: Packet Layer
Conformance Suite (S)
1991 Amd 5 Information Technology Telecommunications and Information
Exchange Between Systems - High- Level
Data Link Control (HDLC) Procedures General Purpose XID Frame Information
Field Content and Format
1997 Information Technology - Open
Systems Interconnection - Virtual Terminal
Basic Class Service (S)
1997 Information Technology - Open
Systems Interconnection - Virtual Terminal
Basic Class Protocol Part 1: Specification (S)
1997 Information Technology - Open
Systems Interconnection - Virtual Terminal
Basic Class Protocol Part 2: Protocol
Implementation Conformance Statement
(PICS) Proforma (S)
1996 Information Technology - Open
Systems Interconnection - Reliable Transfer:
Protocol Implementation Conformance
Statement (PICS) Proforma (S)
1995 CCITT High Level Language (CHILL)
(S)
1989 Track Format
1999 Programming Languages - C
Supersedes BS EN 29899: 1993; (S)
2000 Information Technology - Database
Languages - SQL - Part 10: Object Language
Bindings (SQL/OLB) (S)
2001 Information Technology - Software
Product Quality - Part 1: Quality Model (S)
1990 Information Technology - Picture
Coding Methods - Part 1: Identification (S)
1990 Information Technology - Picture
Coding Methods - Part 2: Procedure for
BS ISO/IEC 9282-2
BS ISO/IEC TR 9294
BS ISO/IEC 9314-3
BS ISO/IEC 9314-5
BS ISO/IEC 9314-6
BS ISO/IEC 9318-2
BS ISO/IEC 9318-3
BS ISO/IEC 9318-3
BS ISO/IEC 9506-1
BS ISO 13317-2
BS ISO 13317-3
Registration
1992 Information Processing - Coded
Representation of Pictures - Part 2:
Incremental Encoding of Point Lists in a 7Bit or 8-Bit Environment
1990 Information Technology - Guidelines
for the Management of Software
Documentation
1990 Information Processing Systems - Fibre
Distributed Data Interface (FDDI) - Part 3:
Physical Layer Medium Dependent (PMD)
1995 Information Technology Fibre
Distributed Data Interface (FDDI) - Part 5:
Hybrid Ring Control (HRC) (T)
1998 Information Technology - Fibre
Distributed Data Interface (FDDI) - Part 6:
Station Management (SMT) (S)
1990 Information Technology - Intelligent
Peripheral Interface Part 2: Device Specific
Command Set for Magnetic Disk Drives
(Renumbered as BS EN 29318-2: 1995)
1990 Amd 1 Information Technology Intelligent Peripheral Interface Part 3: Device
Generic Command Set for Magnetic and
Optical Disk Drives AMD 8326; November
15, 1994; Renumbered as BS EN 29318-3:
1994; (S)
1990 Information Technology - Intelligent
Peripheral Interface Part 3: Device Generic
Command Set for Magnetic and Optical Disk
Drives (Renumbered as BS EN 29318-3:
1994)
1990 Industrial Automation Systems Manufacturing Message Specification - Part
1: Service Definition (S)
2001 Determination of Particle Size
Distribution by Gravitational Liquid
Sedimentation Methods - Part 2: Fixed
Pipette Method Together with BS ISO
13317-1:2001 and BS ISO 13317-3:2001 it
Supersedes BS 3406-2:1984; (G)
2001 Determination of Particle Size
Distribution by Gravitational Liquid
Sedimentation Methods - Part 3: X-Ray
Gravitational Technique Together with BS
ISO 13317-1:2001 and BS ISO 13317-2:2001
BS ISO 13319
BS ISO 13320-1
BS ISO 13362
BS ISO/TR 13387-1
BS ISO/TR 13387-2
BS ISO TR 13387-3
BS ISO TR 13387-4
BS ISO/TR 13387-6
BS ISO/TR 13387-7
BS ISO/TR 13387-8
BS ISO 13405-1
BS ISO 13405-2
BS ISO 13405-3
BS ISO 13450
BS ISO 13463
it Supersedes BS 3406-2:1984; (G)
2000 Determination of Particle Size
Distributions - Electrical Sensing Zone
Method (H)
1999 Particle Size Analysis - Laser
Diffraction Methods - Part 1: General
Principles (H)
2000 Flexible Cellular Polymeric Materials Determination of Compression Set Under
Humid Conditions (V)
1999 Fire Safety Engineering - Part 1:
Application of Fire Performance Concepts to
Design Objectives (G)
1999 Fire Safety Engineering - Part 2: Design
Fire Scenarios and Design Fires (G)
1999 Fire Safety Engineering - Part 3:
Assessment and Verification of Mathematical
Fire Models (G)
1999 Fire Safety Engineering - Part 4:
Initiation and Development of Fire and
Generation of Fire Effluents (G)
1999 Fire Safety Engineering - Part 6:
Structural Response and Fire Spread Beyond
the Enclosure of Origin (G)
1999 Fire Safety Engineering - Part 7:
Detection, Activation and Suppression (G)
1999 Fire Safety Engineering - Part 8: Life
Safety - Occupant Behaviour, Location and
Condition (G)
1996 Prosthetics and Orthotics Classification and Description of Prosthetic
Components Part 1. Classification of
Prosthetic Components (N)
1996 Prosthetics and Orthotics Classification and Description of Prosthetic
Components Part 2: Description of LowerLimb Prosthetic Components (N)
1996 Prosthetics and Orthotics Classification and Description of Prosthetic
Components Part 3: Description of UpperLimb Prosthetic Components (N)
1996 Photography - 110-Size Cartridge, Film
and Backing Paper - Dimensions (H)
1999 Nuclear-Grade Plutonium Dioxide
Powder for Fabrication of Light Water
Reactor MOX Fuel - Guidelines to Help in
BS ISO 13468-2
BS ISO 13475-1
BS ISO 13565-1
BS ISO 13565-1
BS ISO 13565-2
BS ISO 13565-2
BS ISO 13583-1
BS ISO 13584-20
BS ISO 13586
BS ISO 13628-6
BS ISO 13628-9
the Definition of a Product Specification (Q)
1999 Plastics - Determination of the Total
Luminous Transmittance of Transparent
Materials - Part 2: Double-Beam Instrument
(V)
1999 Acoustics - Stationary Audible Warning
Devices Used Outdoors - Part 1: Field
Measurements for Determination of Sound
Emission Quantities (N)
1996 Geometric Product Specifications
(GPS) - Surface Texture: Profile Method Surfaces Having Stratified Functional
Properties Part 1: Filtering and General
Measurement Conditions (H)
1996 Amd 1 Geometric Product
Specifications (GPS) - Surface Texture:
Profile Method - Surfaces Having Stratified
Functional Properties Part 1: Filtering and
General Measurement Conditions AMD
9949; May 1998; Renumbered as BS EN ISO
13565-1: 1998; (H)
1996 Geometric Product Specifications
(GPS) - Surface Texture: Profile Method Surfaces Having Stratified Functional
Properties Part 2: Height Characterization
Using the Linear Material Ratio Curve (H)
1996 Amd 1 Geometric Product
Specifications (GPS) - Surface Texture:
Profile Method - Surfaces Having Stratified
Functional Properties Part 2: Height
Characterization Using the Linear Material
Ratio Curve AMD 9950; May 1998;
Renumbered as BS EN ISO 135652000 Centrifugally Cast Steel and Alloy
Products - Part 1: General Testing and
Tolerances (V)
1998 Industrial Automation Systems and
Integration - Parts Library - Part 20: Logical
Resource: Logical Model of Expressions (S)
2000 Plastics - Determination of Fracture
Toughness (GIC and KIC) - Liner Elastic
Fracture Mechanics (LEFM) Approach (V)
2000 Petroleum and Natural Gas Industries Production and Drilling Equipment - Part 6:
Design and Operation of Subsea Controls (Q)
2000 Petroleum and Natural Gas Industries -
BS ISO 13640
BS ISO 13651
BS ISO 13653
BS ISO 13655
BS ISO 13656
BS ISO 13678
BS ISO 13689
BS ISO 13690
BS ISO 13779-1
BS ISO 13806
BS ISO 13691
BS ISO/TS 13725
BS ISO 13738
Design and Operation of Subsea Production
Systems - Part 9: Remotely Operated Tool
(ROT) Intervention Systems (Q)
1999 Building Construction - Jointing
Products - Specifications for Test Substrates
(R)
1996 Plastics - Epoxy Resins and Related
Materials - Determination of Total
Saponifiable Chlorine (W)
1996 Optics and Optical Instruments General Optical Test Methods - Measurement
of Relative Irradiance in the Image Field (H)
1996 Graphic Technology - Spectral
Measurement and Colorimetric Computation
for Graphic Arts Images (G)
2000 Graphic Technology - Application of
Reflection Densitometry and Colorimetry to
Process Control or Evaluation of Prints and
Proofs (H)
2000 Petroleum and Natural Gas Industries Evaluation and Testing of Thread
Compounds for Use with Casing, Tubing and
Line Pipe (Q)
2001 Refigerated Light Hydrocarbon Fluids Measurement of Liquid Levels in Tanks
Containing Liquefied Gases - MicrowaveType Level Gauge (Q)
1999 Cereals, Pulses and Milled Products Sampling of Static Batches Supersedes BS
4510: 1980, BS 4511: 1980, and BS 5333:
1981; (W)
2000 Implants for Surgery - Hydroxyapatite Part 1: Ceramic Hydroxyapatite
1999 Vitreous and Procelain Enamels Corrosion Tests in Closed Systems (F)
2001 Petroleum and Natural Gas Industries High-Speed Special-Purpose Gear Units (Q)
2001 Hydraulic Fluid Power - Cylinders Method for Determining the Buckling Load
(E)
2000 Lubricants, Industrial Oils and Related
Products (Class L) - Family E (Internal
Combustion Engine Oils) - Specifications for
Two-Stroke-Cycle Gasoline Engine Oils,
(Categories EGB, EGC and EGD) (W) ISO
13738: 2000
BS ISO/TR 13739
BS ISO 13746
BS ISO 13772
BS ISO 13775-1
BS ISO 13775-2
BS ISO 13778
BS ISO 13779-2
BS ISO 13794
BS ISO 13802
BS ISO 13804
BS ISO 13805
BS ISO 13807
BS ISO 13807
BS ISO 13820
1998 Petroleum Products - Methods of
Specifying Practical Procedures for the
Transfer of Bunker Fuels to Ships ISO/TR
13739:1998; (Q)
2000 Textile Floor Coverings - Guidelines
for Installation and Use on Stairs (L)
1997 Forestry Machinery - Portable
Chainsaws - Non-Manually Actuated Chain
Brake Performance (E)
2000 Thermoplastic Tubing and Hoses for
Automotive Use - Part 1: Non-Fuel
Applications (E)
2000 Thermoplastic Tubing and Hoses for
Automotive Use - Part 2: Petroleum-Based
Fuel Applications (E)
1999 Plain Bearings - Quality Assurance of
Thin-Walled Half Bearings - Selective
Assembly of Bearings to Achieve a Narrow
Clearance Range (E)
2000 Implants for Surgery - Hydroxyapatite Part 2: Coatings of Hydroxyapatite (N)
1999 Ambient Air - Determination of
Asbestos Fibres - Indirect-Transfer
Transmission Electron Microscopy Method
(N)
1999 Plastics - Verification of Pendulum
Impact-Testing Machines - Charpy, Izod and
Tensile Impact-Testing (V)
1999 Vitreous and Porcelain Enamels for
Aluminium - Production of Specimens for
Testing (F)
1999 Vitreous and Porcelain Enamels for
Aluminium - Determination of the Adhesion
of Enamels on Aluminium under the Action
of Electrolytic Solution (Spall Test) (F)
1999 Corr 1 Vitreous and Porcelain Enamels
- Determination of Crack Formation
Temperature in the Thermal Shock Testing of
Enamels for the Chemical Industry CORR
13024:July 2001; (F)
1999 Vitreous and Porcelain Enamels Determination of Crack Formation
Temperature in the Thermal Shock Testing of
Enamels for the Chemical Industry (F)
1996 Paper, Board and Corrugated
Fibreboard - Description and Calibration of
BS ISO 13879
BS ISO 13880
BS ISO 13909-1
BS ISO 13909-2
BS ISO 13909-3
BS ISO 13909-4
BS ISO 13909-5
BS ISO 13909-6
BS ISO 13909-7
Compression Testing Equipment (H)
1999 Petroleum and Natural Gas Industries Content and Drafting of Functional
Specifications (G)
1999 Petroleum and Natural Gas Industries Content and Drafting of a Technical
Specification (G)
2001 Hard Coal and Coke - Mechanical
Sampling - Part 1: General Introduction (Q)
2001 Hard Coal and Coke - Mechanical
Sampling - Part 2: Coal - Sampling from
Moving Streams Together with BS ISO
13909-1 and BS ISO 13909-3 to 8, it
Supersedes the Mechanical Aspects of
Sampling of Coal and Coke Described in BS
1017-1:1989 and BS 1017-2:1
2001 Hard Coal and Coke - Mechanical
Sampling - Part 3: Coal - Sampling from
Stationary Lots Together with BS ISO
13909-1 and 2 and BS ISO 13909-4 to 8, it
Supersedes the Mechanical Aspects of
Sampling of Coal and Coke Described in BS
1017-1:1989 and BS 1
2001 Hard Coal and Coke - Mechanical
Sampling - Part 4: Coal - Preparation of Test
Samples Together with BS ISO 13909-1 to 3
and BS ISO 13909-5 to 8, it Supersedes the
Mechanical Aspects of Sampling of Coal and
Coke Described in BS 1017-1:1989 and BS
1017
2001 Hard Coal and Coke - Mechanical
Sampling - Part 5: Coke - Sampling from
Moving Streams Together with BS ISO
13909-1 to 4 and BS ISO 13909-6 to 8, it
Supersedes the Mechancial Aspects of
Sampling of Coal and Coke Described in BS
1017-1:1989 and BS 101
2001 Hard Coal and Coke - Mechanical
Sampling - Part 6: Coke - Preparation of Test
Samples Together with BS ISO 13909-1 to 5
and BS ISO 13909-7 and 8, it Supersedes the
Mechanical Aspects of Sampling of Coal and
Coke Described in BS 1017-1:1989 and BS
101
2001 Hard Coal and Coke - Mechanical
Sampling - Part 7: Methods for Determining
BS ISO 13909-8
BS ISO TR 13928
BS ISO 13953
BS ISO 13984-1
BS ISO 14015
BS ISO 14021
BS ISO 14024
BS ISO 14024
BS ISO 14137
BS ISO 14139
BS ISO 14164
the Precision of Sampling, Sample
Preparation and Testing Together with BS
ISO 13909-1 to 6 and BS ISO 13909-8, it
Supersedes the Mechanical Aspects of
Sampling of Coal and Co
2001 Hard Coal and Coke - Mechanical
Sampling - Part 8: Methods of Testing for
Bias Together with BS ISO 13909-1 to 7, it
Supersedes the Mechanical Aspects of
Sampling of Coal and Coke Described in BS
1017-1:1989 and BS 1017-2:1994; (Q)
1994 Application Guide for ISO 10755, ISO
10756, ISO 10757, ISO 10758 and ISO
10759 (S)
2001 Polyethylene (PE) Pipes and Fittings Determination of the Tensile Strength and
Failure Mode of Test Pieces from a ButtFused Joint (E)
2000 High-Pressure Decorative Laminates Composite Elements - Part 1: Test Methods
(V)
2001 Environmental Management Environmental Assessment of Sites and
Organizations (EASO) (G)
1999 Environmental Labels and Declarations
- Self-Declared Environmental Claims (Type
II Environmental Labelling) (G)
1999 Environmental Labels and Declarations
- Type I Environmental Labelling - Principles
and Procedures (G)
1999 Amd 1 Environmental Labels and
Declarations - Type I Environmental
Labelling - Principles and Procedures AMD
13492: November 2, 2001; Renumbered as
BS EN ISO 14024:2001; (G)
2000 Machine Tools - Test Conditions for
Wire Electrical-Discharge Machines (Wire
EDM) - Terminology and Testing of the
Accuracy (F)
2000 Hydrometric Determinations - Flow
Measurements in Open Channels Using
Structures - Compound Gauging Structures
Supersedes BS 3680-4D: 1989; (Q)
1999 Stationary Source Emissions Determination of the Volume Flowrate of
Gas Streams in Ducts - Automated Method
BS ISO/TR 14179-1
BS ISO/TR 14179-2
BS ISO 14224
BS ISO 14237
BS ISO 14368-1
BS ISO 14378
BS ISO/TR 14396
BS ISO 14453
BS ISO 14453
BS ISO 14487
BS ISO 14512
BS ISO 14532
BS ISO 14546
BS ISO 14524
BS ISO 14535
(H)
2001 Gears - Thermal Capacity - Part 1:
Rating Gear Drives with Thermal
Equilibrium at 95 Degrees C Sump
Temperature (E)
2001 Gears - Thermal Capacity - Part 2:
Thermal Load Carrying Capacity (E)
1999 Petroleum and Natural Gas Industries Collection and Exchange of Reliability and
Maintenance Data for Equipment (W)
2000 Surface Chemical Analysis Secondary-Ion Mass Spectrometry Determination of Boron Atomic
Concentration in Silicon Using Uniformly
Doped Materials (W)
2000 Mineral and Sapphire Watch-Glasses Part 1: Dimensions and Tolerances (L)
2000 Milk and Dried Milk - Determination
of-Iodide Content - Method Using High
Performance Liquid Chromatography (W)
1996 Reciprocating Internal Combustion
Engines - Determination and Method for the
Measurement of Engine Power (Q)
1997 Pulps - Determination of AcetoneSoluble Matter Supersedes BS 4501: 1969;
(V)
1997 Amd 1 Pulps - Determination of
Acetone-Soluble Matter AMD 10509;
January 2000; Renumbered by BS EN ISO
14453: 2000; (V)
1997 Pulps - Standard Water for Physical
Testing (H)
1999 Passenger Cars - Straight-Ahead
Braking on Surfaces with Split Coefficient of
Friction - Open-Loop Test Method (E)
2001 Natural Gas - Vocabulary (G)
2000 Photography - Aerial Films and Spools
- Dimensions (H)
1999 Photography - Electronic Still-Picture
Cameras - Methods for Measuring OptoElectronic Conversion Functions (OECFs)
(H)
2001 Photography - Room-Light Loading
Packages for Electronic Scanners and ImageSetting Film and Paper Rolls - Dimensions
and Related Requirements (H)
BS ISO 14558
BS ISO 14616
BS ISO 14635-1
BS ISO 14647
BS ISO 14654
BS ISO 14656
BS ISO 14661
BS ISO 14707
BS ISO 14714
BS ISO 14726-1
BS ISO/TR 14696
BS ISO 14726-1
BS ISO 14807
BS ISO 14849
2000 Rubber - Determination of Residual
Unsaturation of Hydrogenated Nitrile Rubber
(HNBR) by Infrared Spectroscopy (V)
1997 Plastics - Heatshrinkable Films of
Polyethylene, Ethylene Copolymers and
Their Mixtures - Determination of the
Shrinkage Stress and Contraction Stress (V)
2000 Gears - FZG Test Procedures - Part 1:
FZG Test Method A/8, 3/90 for Relative
Scuffing Load-Carying Capacity of Oils (E)
2000 Metallic Coatings - Determination of
Porosity on Gold Coatings on Metallic
Substrates - Nitric Acid Vapour Test (F)
Epoxy-Coated Steel for the Reinforcement of
Concrete Supersedes BS 7295-1: 1990; (R)
1999 Epoxy Powder and Sealing Material for
the Coating of Steel for the Reinforcement of
Concrete Supersedes BS 7295-2: 1990; (R)
2000 Thermal Turbines for Industrial
Applications (Steam Turbines, Gas
Expansion Turbines) - General Requirements
(Q)
2000 Surface Chemical Analysis - Glow
Discharge Optical Emission Spectrometry
(GD-OES) - Introduction to Use (W)
1998 Essential Oils and Aromatic Extracts Determination of Residual Benzene Content
(W)
1999 Ships and Marine Technology Identification Colours for the Content of
Piping Systems - Part 1: Main Colours and
Media (Q)
1999 Reaction to Fire Tests - Determination
of Fire Parameters of Materials, Products and
Assemblies Using an Intermediate Scale Heat
Release Calorimeter (ICAL) (N)
1999 Amd 1 Ships and Marine Technology Identification Colours for the Content of
Piping Systems - Part 1: Main Colours and
Media AMD 13459: 02/21/2002;
Renumbered as BS EN ISO 14726-1:2002;
(Q)
2001 Photography - Transmission and
Reflection Densitometers - Method for
Determining Performance (H)
1999 Plastics - Phenol-Formaldehyde
BS ISO 14851
BS ISO 14852
BS ISO 14855
BS ISO 14856
BS ISO 14879-1
BS ISO 14881
BS ISO 14897
BS ISO 14898
BS ISO 14949
BS ISO 14899
BS ISO 14900
BS ISO 14953
BS ISO 14975
Mouldings - Determination of Free Ammonia
and Ammonium Compounds - Indophenol
Method (V)
1999 Determination of the Ultimate Aerobic
Biodegradability of Plastic Materials in an
Aqueous Medium - Method by Measuring
the Oxygen Demand in a Closed
Respirometer (V)
1999 Determination of the Ultimate Aerobic
Biodegradability of Plastic Materials in an
Aqueous Medium - Method by Analysis of
Evolved Carbon Dioxide (V)
1999 Determination of the Ultimate Aerobic
Biodegradability and Disintegration of
Plastic Materials under Controlled
Composting Conditions - Method by
Analysis of Evolved Carbon Dioxide (V)
2001 Timekeeping Instruments - Wristwatch
Cases - Fixing Dimensions of Non-SpringBar Types (L)
2000 Implants for Surgery - Total Knee-Joint
Prostheses - Part 1: Determination of
Endurance Properties of Knee Tibial Trays
(N)
2001 Integrated Optics - Interfaces Parameters Relevant to Coupling Properties
(S)
2000 Plastics - Polyols for Use in the
Production of Polyurethane - Determination
of Water Content (V)
1999 Plastics - Polyurethane Raw Materials Aromatic Isocyanates - Determination of
Acidity (V)
2001 Implants for Surgery - Two-Part
Addition-Cure Silicone Elastomers (N)
2001 Plastics - Polyols for Use in the
Production of Polyurethane - Determination
of Basicity (V)
2001 Plastics - Polyols for Use in the
Production of Polyurethane - Determination
of Hodroxyl Number (V)
2000 Space Systems - Structural Design Determination of Loading Levels for Static
Qualification Testing of Launch Vehicles (S)
2000 Surface Chemical Analysis Information Formats (S)
BS ISO 15032
BS ISO 15034
BS ISO 14965
BS ISO 14968
BS ISO 15022-1
BS ISO 15022-2
BS ISO 15025
BS ISO 15033
BS ISO 15040
BS ISO 15188
BS ISO 15361
BS ISO 15038
BS ISO TR 15070
BS ISO 15072
BS ISO 15086-1
BS ISO 15086-2
2000 Prostheses - Structural Testing of Hip
Joints (N)
1999 Composites - Prepregs - Determination
of Resin Flow (V)
2000 Ambient Air - Determination of Total
Non-Methane Organic Compounds Cryogenic Preconcentration and Direct Flame
Ionization Detection Method (N)
1999 Paper and Board - Cut-Size Office
Paper - Measurement of Curl in a Pack of
Sheets (H)
1999 Securities - Scheme for Messages (Data
Field Dictionary) - Part 1: Data Field and
Message Design Rules and Guidelines (S)
1999 Securities - Scheme for Messages (Data
Field Dictionary) - Part 2: Maintenance of the
Data Field Dictionary and Catalogue of
Messages (S)
2000 Protective Clothing - Protection Against
Heat and Flame - Method of Test for Limited
Flame Spread (N)
2000 Plastics - Determination of Caprolactam
and Its Cyclic and Liner Pligomers by HPLC
(V)
1999 Composites - Prepregs - Determination
of Gel Time (V)
2001 Project Management Guidelines for
Terminology Standardization (G)
2000 Pulps - Determination of Zero-Span
Tensile Strength, Wet or Dry (H)
1999 Plastics - Organic-Perester Crosslinking
Agents for Unsaturated-Polyester
Thermosetting Materials - Determination of
Active-Oxygen Content (V)
1996 Series 1 Freight Containers - Rationale
for Structural Test Criteria (H)
1999 Hexagon Bolts with Flange with Metric
Fine Pitch Thread - Small Series - Producy
Grade A (E)
2001 Hydraulic Fluid Power - Determination
of the Fluid-Borne Noise Characteristics of
Components and Systems - Part 1:
Introduction (E)
2000 Hydraulic Fluid Power - Determination
of Fluid-Borne Noise Characteristics of
Components and Systems - Part 2:
BS ISO 15100
BS ISO 15166-2
BS ISO 15171-1
BS ISO 15664
BS ISO 15171-2
BS ISO 15186-1
BS ISO 15202-1
BS ISO 15227
BS ISO 15303
BS ISO 15310
BS ISO 15319
BS ISO 15324
BS ISO 15359
Measurement of Speed of Sound in a Fluid in
a Pipe (E)
2000 Plastics - Reinforcement Fibres Chopped Strands - Determination of Bulk
Density (V)
2000 Adhesives - Methods of Preparing Bulk
Specimens - Part 2: Elevated-TemperatureCuring One-Part Systems (W)
1999 Connections for Fluid Power and
General Use - Hydraulic Couplings for
Diagnostic Purposes - Part 1: Coupling Not
for Connection under Pressure (E)
2001 Acoustics - Noise Control Design
Procedures for Open Plant (F)
2000 Connections for Fluid Power and
General Use - Hydraulic Couplings for
Diagnostic Purposes - Part 2: Coupling with
M16 x 2 End for Connection Under Pressure
(E)
2000 Acoustics - Measurement of Sound
Insulation in Buildings and of Building
Elements Using Sound Intensity - Part 1:
Laboratory Conditions (R)
2000 Workplace Air - Determination of
Metals and Metalloids in Airborne Particulate
Matter by Inductively Coupled Plasma
Atomic Emission Spectrometry - Part 1:
Sampling (H)
2000 Optics and Optical Instruments Microscopes - Testing of Stereomicroscopes
(H)
2001 Animal and Vegetable Fats and Oils Detection and Identification of a Volatile
Organic Contaminant by GC/MS (W)
1999 Reinforced Plastics - Determination of
the In-Plane Shear Modulus by the Plate
Twist Method (V)
1999 Recycled Pulps - Estimation of Visible
Contraries by Instrumental Means using
Reflected Light (H)
2000 Corrosion of Metals and Alloys Evaluation of Stress Corrosion Cracking by
the Drop Evaporation Test (V)
1999 Paper and Board - Determination of the
Static and Kinetic Coefficients of Friction Horizonatal Plane Method (H)
BS ISO 15360-1
BS ISO 15668
BS ISO 18911
BS ISO 18923
BS ISO 15350
BS ISO 18924
BS ISO 15368
BS ISO 15371
BS ISO 15373
BS ISO 15394
BS ISO 15401
BS ISO 15402
BS ISO 15403
BS ISO 15407-1
BS ISO 15489-1
BS ISO 15512
BS ISO 15600
2000 Recycled Pulps - Estimation of Stickies
and Plastics - Part 1: Visual Method (H)
1999 Banking - Secure File Transfer (Retail)
(S)
2000 Photography - Processed Safety
Photographic Films - Storage Practices (H)
2000 Imaging Materials - Polyester-Base
Magnetic Tape - Storage Practices (S)
2001 Steel and Iron - Determination of Total
Carbon and Sulfur Content - Infrared
Absorption Method After Combustion in an
Induction Furnace (Routine Method) (V)
2000 Imaging Materials - Test Methods for
Arrhenius Type Prediction (H)
2001 Optics and Optical Instruments Measurement of Reflectance of Plane
Surfaces and Transmittance of Plane Parallel
Elements (N)
2000 Ships and Marine Technology - FireExtinguishing Systems for Protection of
Galley Deep-Fat Cooking Equipment Fire
Tests (Q)
2001 Plastics - Polymer Dispersions Determination of Free Formaldehyde (V)
2000 Packaging - Bar Code and TwoDimensional Symbols for Shipping,
Transport and Receiving Labels (S)
2000 Ships and Marine Technology - Bulk
Carriers - Construction Quality of Hull
Structure (Q)
2000 Ships and Marine Technology - Bulk
Carriers - Repair Quality of Hull Structure
(Q)
2000 Natural Gas - Designation of the
Quality of Natural Gas for Use as a
Compressed Fuel for Vehicles (W)
2000 Pneumatic Fluid Power - Five-Port
Directional Control Valves, Sizes 18 mm and
26 mm - Part 1: Mounting Interface Surfaces
without Electrical Connector (E)
2001 Information and Documentation Records Management - Part 1: General (G)
1999 Plastics - Determination of Water
Content (V)
2000 Tools for Moulding - Thermal
Insulating Sheets for Injection Moulds (F)
BS ISO 15490
BS ISO 15509
BS ISO 15513
BS ISO 15529
BS ISO 15544
BS ISO 15557
BS ISO 19105
SP 118
BS ISO 15558
BS ISO 15559
BS ISO 15560
BS ISO 15561
BS ISO 15562
BS ISO 15566
BS ISO 15592-1
BS ISO 15592-2
2000 Fine Ceramics (Advanced Ceramics,
Advanced Technical Ceramics) - Test
Method for Tensile Strength of Monolithic
Ceramics at Room Temperature (V)
2001 Adhesives - Determination of the Bond
Strength of Engineering-Plastic Joints (W)
2000 Cranes - Competency Requirements for
Crane Drivers (Operators), Slingers,
Signallers and Assessors (Q)
1999 Optics and Optical Instruments Optical Transfer Function - Principles of
Measurement of Modular Transfer Function
(MTF) of Sampled Imaging Systems (H)
2000 Petroleum and Natural Gas Industries Offshore Production Installations Requirements and Guidelines for Emergency
Response (Q)
1998 Practice for Use of a Radiochromic
Film Dosimetry System (H)
2000 Geographic Information - Conformance
and Testing (S)
1958 Amd 1 Tie Rods (Unified Threads) for
Aircraft
1998 Practice for Use of a
Polymethylmethacrylate Dosimetry System
(H)
1998 Practice for Use of a Radiochromic
Optical Waveguide Dosimetry System (H)
1998 Practice for Characterization and
Performance of a High-Dose Radiation
Dosimetry Calibration Laboratory (H)
1998 Practice for Use of a Dichromate
Dosimetry System (H)
1998 Practice for Dosimetry in Electron and
Bremsstrahlung Irradiation Facilities for
Food Processing (H)
1998 Practice for Use of the Alanine-EPR
Dosimetry System (H)
2001 Fine-Cut Tobacco and Smoking
Articles Made from It - Methods of
Sampling, Conditioning and Analysis - Part
1: Sampling (W)
2001 Fine-Cut Tobacco and Smoking
Articles Made from It - Methods of
Sampling, Conditioning and Analysis - Part
2: Atmosphere for Conditioning and Testing
BS ISO 15593
BS ISO 15621
BS ISO 15663-1
BS ISO 15663-2
BS ISO 15663-3
BS ISO 15671
BS ISO 15672
BS ISO 15674
BS ISO 15675
BS ISO 16030
BS ISO 16366
BS ISO 15686-1
BS ISO 15686-2
BS ISO 15707
BS ISO 15730
(W)
2001 Environmental Tobacco Smoke Estimation of its Contribution to Respirable
Suspended Particles - Determination of
Particulate Matter by Ultraviolet Absorbanc
and by Fluorescence (H)
1999 Urine-Absorbing Aids - General
Guidance on Evaluation (N)
2000 Petroleum and Natural Gas Industries Life Cycle Costing - Part 1: Methodology
(W)
2001 Petroleum and Natural Gas Industries Life-Cycle Costing - Part 2: Guidance on
Application of Methodology and Calculation
Methods (Q)
2001 Petroleum and Natural Gas Industries Life Cycle Costing - Part 3: Implementation
Guidelines (Q)
2000 Rubber and Rubber Additives Determination of Total Sulfur Content Using
an Automatic Analyser (V)
2000 Rubber and Rubber Additives Determination of Total Nitrogen Content
Using an Automatic Analyser (V)
2001 Cardiovascular Implants and Artificial
Organs - Hard-Shell Cardiotomy/Venous
Reservoir Systems (with/without Filter) and
Soft Venous Reservoir Bags (N)
2001 Cardiovascular Implants and Artificial
Organs - Cardiopulmonary Bypass Systems Arterial Line Blood Filters (N)
2001 Pneumatic Fluid Power - Connections Ports and Stud Ends (E)
2001 Tools for Pressing - L-Shaped Guides
(F)
2000 Buildings and Constructed Assets Service Life Planning - Part 1: General
Principles (R)
2001 Buildings and Constructed Assets Service Life Planning - Part 2: Service Life
Prediction Procedures (R)
2001 Information and Documentation International Standard Musical Work Code
(ISWC) (G)
2000 Metallic and Other Inorganic Coatings Electropolishing as a Means of Smoothing
BS ISO 15752
BS ISO 15849
BS ISO 15930-1
BS ISO 16366
BS ISO 16367
BS ISO 18910
BS ISO 16016
BS ISO 16028
BS ISO 16049-1
BS ISO 16063-11
BS ISO 16065-1
BS ISO 16107
BS ISO 16165
BS ISO/TR 16386
BS ISO 16589-1
and Passivating Stainless Steel (V)
2000 Ophthalmic Instruments Endoilluminators - Fundamental
Requirements and Test Methods for Optical
Radiation Safety (N)
2001 Ships and Marine Technology Guidelines for Implementation of a Fleet
Management System Network (Q)
2001 Graphic Technology - Prepress Digital
Data Exchange - Use of PDF - Part 1:
Complete Exchange Using CMYK Data
(PDF/X-1 and PDF/X-1a) (S)
2001 Corr 1 Tools for Pressing - L-Shaped
Guides CORR 13257:June 2001; (F)
2001 Tools for Pressing - Guide Plates - Uand V-Blocks (F)
2000 Imaging Materials - Photographic Film
and Paper - Determination of Curl (H)
2000 Technical Product Documentation
Notices for Restricting the Use of Documents
and Products (G)
1999 Hydraulic Fluid Power - Flush-Face
Type, Quick-Action Couplings for Use at
Pressures of 20 MPa (200 Bar) to 31,5 MPa
(315 Bar) - Specifications (E)
2001 Air Cargo Equipment - Restraint Straps
- Part 1: Design Criteria and Testing Methods
(S)
1999 Methods for the Calibration of
Vibration and Shock Transducers - Part 11:
Primary Vibration Calibration by Laser
Interferometry (H)
2001 Pulps - Determination of Fibre Length
by Automated Optical Analysis - Part 1:
Polarized Light Method (H)
1999 Workplace Atmospheres - Protocol for
Evaluating the Performance of Diffusive
Samplers (G)
2001 Ships and Marine Technology - Marine
Environment Protection - Terminology
Relating to Oil Spill Response (Q)
1999 Impact of Changes in ISO Fluid Power
Particle Counting - Contamination Control
and Filter Test Standards (E)
2001 Rotary Shaft Lip-Type Seals
Incorporating Thermoplastic Sealing
BS ISO 16589-2
BS ISO 8009-4
BS ISO 8009-5
BS EN 61300-3-11
BS EN 61300-3-12
BS EN 61300-3-13
BS EN 61300-3-14
BS EN 61300-3-15
Elements - Part 1: Nominal Dimensions and
Tolerances (E)
2001 Rotary Shaft Lip-Type Seals
Incorporating Thermoplastic Sealing
Elements - Part 2: Vocabulary (E)
1996 Reusable Rubber Contraceptive
Diaphragms Part 4: Freedom from Visible
Defects Together with BS ISO 8009: Parts 1
to 3 and Parts 5 to 10, it Supersedes BS 4028:
1989; (N)
1996 Reusable Rubber Contraceptive
Diaphragms Part 5: Determination of Tensile
Properties Together with BS ISO 8009: Parts
1 to 4, and Parts 6 to 10, it Supersedes BS
4028: 1989; (N)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 3.11:
Examinations and Measurements Engagement and Separation Forces IEC
61300-3-11: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 3:
Examinations and Measurements Section 12:
Polarization Dependence of Attenuation of a
Single-Mode Fibre Optic Component: Matrix
Calculation Met
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 3.13:
Examinations and Measurements - Control
Stability of a Fibre Optic Switch IEC 613003-13: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 3.14:
Examinations and Measurements - Accuracy
and Repeatability of the Attenuation Settings
of a Variable Attenuator IEC 61300-3-14:
1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 3.15:
Examinations and Measurements Eccentricity of a Convex Polished Ferrule
BS EN 61300-3-16
BS ISO 10202-1
BS ISO 10209-1
BS ISO 10223
BS ISO 10227
BS ISO TR 10232
BS ISO 10202-2
BS ISO TR 10233
BS ISO 10270
BS ISO 10294-1
BS ISO 10294-2
BS ISO 10294-4
BS ISO 10300-1
Endface IEC 61300-3-15: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 3.16:
Examinations and Measurements - Endface
Radius of Spherically Polished Ferrules IEC
61300-3-16: 1995; (S)
1991 Financial Transaction Cards - Security
Architecture of Financial Transaction
Systems Using Integrated Circuit Cards - Part
1: Card Life Cycle (Renumbered as BS EN
30202-1: 1993)
1992 Technical Product Documentation Vocabulary - Part 1: Terms Relating to
Technical Drawings: General and Types of
Drawings (G)
1992 Textile Machinery - Flat Warp Knitting
Machines - Numbering of Guide Bars (L)
1996 Human/Human Surrogate Impact
(Single Shock) Testing and Evaluation Guidance on Technical Aspects (H)
1989 General-Purpose Flat Pallets for
Through Transit of Goods - Design Rating
and Maximum Working Load (H)
1996 Financial Transaction Cards - Security
Architecture of Financial Transaction
Systems Using Integrated Circuit Cards Part
2: Transaction Process (S)
1989 General-Purpose Flat Pallets for
Through Transit of Goods - Performance
Requirements (H)
1995 Corrosion of Metals and Alloys Aqueous Corrosion Testing of Zirconium
Alloys for Use in Nuclear Power Reactors
(V)
1996 Fire Resistance Tests - Fire Dampers
for Air Distribution Systems Part 1: Test
Method (N)
1999 Fire Resistance Tests - Fire Dampers
for Air Distribution Systems - Part 2:
Classification, Criteria and Field of
Application of Test Results (N)
2001 Fire Resistance Tests - Fire Dampers
for Air Distribution Systems - Part 4: Test of
Thermal Release Mechanism (N)
2001 Calculation of Load Capacity of Bevel
BS ISO 8009-2
BS ISO 8009-3
BS ISO 128
BS ISO 128-20
BS ISO 128-21
BS ISO 128-22
BS ISO 128-23
BS IEC 60748-4
Gears - Part 1: Introduction and General
Influence Factors (E)
1985 Reusable Rubber Contraceptive
Diaphragms Part 2: Determination of Size
Together with BS ISO 8009: Part 1 and Parts
3 to 10, This Document Supersedes BS 4028:
1989; (N)
1985 Reusable Rubber Contraceptive
Diaphragms Part 3: Determination of Dome
Thickness Together with BS ISO 8009: Parts
1 and 2 and Parts 4 to 10, This Document
Supersedes BS 4028: 1989; (N)
1982 Technical Drawings - General
Principles of Presentation This BS
Reproduces Verbatim ISO 128:2000 and
Implements it as the UK National Standard.
This together with BS 8888 and other
Implemented European and International
Standards Listed in Annexes A
1996 Technical Drawings - General
Principles of Presentation - Part 20: Basic
Conventions for Lines This BS Reproduces
Verbatim ISO 128-20:1996 and Implements
it as the UK National Standard. Together
with BS 8888 and other Implemented
European and Interna
1997 Technical Drawings - General
Principles of Presentation - Part 21:
Preparation of Lines by CAD Systems This
BS Reproduces Verbatim ISO 128-21:1997
and Implements it as the UK National
Standard. Together with BS 8888 and Other
Implemented european and
1999 Technical Drawings - General
Principles of Presentation - Part 22: Basic
Conventions and Applications for Leader
Lines and Reference Lines This BS
Reproduces Verbatim ISO 128-22:::1999 and
Implements it as the UK National Standard.
Together with BS 8
1999 Technical Drawings - General
Principles of Presentation - Part 23: Lines on
Construction Drawings (G)
1997 Semiconductor Devices - Integrated
Circuits Part 4: Interface Integrated Circuits
Supersedes BS 6493: Part 2: Section 2.4:
BS IEC 60748-5
BS IEC 60780
BS IEC 60793-2
BS IEC 60825-8
BS IEC 60870-1-3
BS IEC 60748-11
BS IEC 60825-6
BS IEC 60864-1
BS IEC 60874-10-1
BS IEC 60874-10-2
BS EN ISO 13937-1
BS EN ISO 13937-2
1989; (S)
1997 Semiconductor Devices - Integrated
Circuits Part 5: Semicustom Integrated
Circuits (S)
1998 Nuclear Power Plants - Electrical
Equipment of the Safety System Qualification (Q)
1998 Optical Fibres - Part 2: Product
Specifications (S)
1999 Safety of Laser Products - Part 8:
Guidelines for the Safe Use of Medical Laser
Equipment (H)
1997 Telecontrol Equipment and Systems
Part 1: General Considerations Section 3:
Glossary Supersedes BS 7404 Section 1.3:
1991; (S)
2000 Harmonized System of Quality
Assessment for Electronic Components
Semiconductor Devices - Sectional
Specification for Semiconductor Integrated
Circuits Excluding Hybrid Circuits
Renumbers BS QC 790100: 1991; QC
790100: 1990; (S)
Safety of Laser Products - Part 6: Safety of
Laser Products with Optical Sources,
Exclusively Used for Visible Information
Transmission to the Human Eye (H)
1986 Standardization of Interconnections
between Broadcasting Transmitters or
Transmitter Systems and Supervisory
Equipment Part 1: Interface Standards for
Systems Using Dedicated Interconnections
(S)
1997 Connectors for Optical Fibres and
Cables - Part 10-1: Detail Specification for
Fibre Optic Adaptor Type BFOC/2,5
Terminated to Multimode Fibre Type A1 (T)
1997 Connectors for Optical Fibres and
Cables - Part 10-2: Detail Specification for
Fibre Optic Connector Type BFOC/2,5
Terminated to Single-Mode Fibre Type B1
(T)
2000 Textiles - Tear Properties of Fabrics Part 1: Determination of Tear Force Using
Ballistic Pendulum Method (Elmendorf) (L)
2000 Corr 1 Textiles - Tear Properties of
BS EN ISO 13937-3
BS EN ISO 13937-4
BS EN ISO 13938-1
BS EN ISO 14001
BS EN ISO 14012
BS EN ISO 14020
BS EN ISO 14021
BS EN ISO 14031
BS EN ISO 14040
BS EN ISO 14042
BS EN ISO 14043
BS EN ISO 11969
BS EN ISO 11978
BS EN ISO 11978
Fabrics - Part 2: Determination of Tear Force
of Trouser-Shaped Test Specimens (Single
Tear Method) CORR 10985; June 2000; (L)
2000 Textiles - Tear Properties of Fabrics Part 3: Determination of Tear Force of WingShaped Test Specimens (Single Tear
Method) (L)
2000 Textiles - Tear Properties of Fabrics Part 4: Determination of Tear Force of
Tongue-Shaped Test Specimens (Double
Tear Method) (L)
1999 Textiles - Bursting Properties of Fabrics
- Part 1: Hydraulic Method for Determination
of Bursting Strength and Bursting Distension
Supersedes BS 4768:1972; (L)
1996 Environmental Management Systems Specification with Guidance for Use (G)
1996 Guidelines for Environmental Auditing
- Qualification Criteria for Environmental
Auditors (G)
2001 Environmental Labels and Declarations
- General Principles ISO 14020:2000; (G)
2001 Environmental Labels and Declarations
- Self-Declared Environmental Claims (Type
II Environmental Labelling) Renumbers BS
ISO 14021:1999; (G)
Environmental Management - Environmental
Performance Evaluation - Guidelines (G)
1997 Environmental Management - Life
Cycle Assessment - Principles and
Framework (G)
2000 Environmental Management - Life
Cycle Assessment - Life Cycle Impact
Assessment (G)
2000 Environmental Management - Life
Cycle Assessment - Life Cycle Interpretation
(G)
1996 Water Quality Determination of
Arsenic - Atomic Absorption Spectrometric
Method (Hydride Technique) (N)
2000 Ophthalmic Optics - Contact Lenses
and Contact Lens Care Products Information Supplied by the Manufacturer
(N)
2000 Corr 1 Ophthalmic Optics - Contact
Lenses and Contact Lens Care Products -
BS EN ISO 11979-2
BS EN ISO 11979-4
BS EN ISO 11981
BS EN ISO 15547
BS EN ISO 15606
BS IEC 61111
BS EN ISO 11984
BS EN ISO 11986
BS EN ISO 11986
BS ISO 17166
BS ISO 18115
BS ISO 18904
BS ISO 16589-3
BS ISO 16589-4
Information Supplied by the Manufacturer
CORR 11068:2000; (N)
2000 Ophthalmic Implants - Intraocular
Lenses - Part 2: Optical Properties and Test
Methods (N)
2000 Ophthalmic Implants - Intraocular
Lenses - Part 4: Labellings and Information
(N)
1999 Ophthalmic Optics - Contact Lenses
and Contact Lens Care Products Determination of Physical Compatibility of
Contact Lens Care Products with Contact
Lenses Also Numbered as BS 7208-22: 1999;
(N)
2001 Petroleum and Natural Gas Industries Plate Heat Exchangers (W)
2000 Dental Handpieces - Air-Powered
Scalers and Scaler Tips (N)
1992 Matting of Insulating Material for
Electrical Purposes (E)
2000 Ophthalmic Optics - Contact Lenses Determination of Rigid Lens Flexure and
Breakage (N)
2001 Ophthalmic Optics - Contact Lenses
and Contact Lens Care Products - Guidelines
for the Determination of Preservative Uptake
and Release Renumbers BS ISO 11986:1999;
(N)
2001 Corr 1 Ophthalmic Optics - Contact
Lenses and Contact Lens Care Products Guidelines for the Determination of
Preservative Uptake and Release CORR
13428:October 11,2001; Renumbers BS ISO
11986:1999; Also Known as BS 720821:2001; (N)
1999 Erythema Reference Action Spectrum
and Standard Erythema Dose (H)
2001 Surface Chemical Analysis Vocabulary (G)
2000 Imaging Materials - Processed Films Method for Determining Lubrication (H)
2001 Rotary Shaft Lip-Type Seals
Incorporating Thermoplastic Sealing
Elements - Part 3: Storage, Handling and
Installation (E)
2001 Rotary Shaft Lip-Type Seals
BS ISO 16589-5
BS ISO/TS 16799
BS ISO 16889
BS ISO 17332
BS ISO 17410
BS ISO 17493
BS ISO 17564
BS ISO/PAS 17984
BS ISO 18902
BS ISO 18906
BS ISO 17776
BS ISO 18907
Incorporating Thermoplastic Sealing
Elements - Part 4: Performance Test
Procedures (E)
2001 Rotary Shaft Lip-Type Seals
Incorporating Thermoplastic Sealing
Elements - Part 5: Identification of Visual
Imperfections (E)
1999 Rolling Bearings - Dynamic Load
Ratings and Rating Life - Discontinuities in
the Calculating of Basic Dynamic Load
Ratings (E)
1999 Hydraulic Fluid Power Filters - MultiPass Method for Evaluating of a Filter
Element Supersedes BS 6275-1:1982; (E)
2001 Cinematography - Manufacturer Printed
Latent Image Identification Information for
35mm Motion-Picture Colour-Print Film Specifications (H)
2001 Microbiology of Food and Animal
Feeding Stuffs - Horizontal Method for the
Enumeration of Psychrotrophic
Microorganisms Supersedes BS 42853:Section 3.1:1986; (W)
2000 Clothing and Equipment for Protection
Against Heat - Test Method for Convective
Heat Resistance using a Hot Air Circulating
Oven (N)
2001 Nitrile Rubber - Determination of
Residual Unsaturation in Hydrogenated
Nitrile Rubber (HNBR) by Iodine Value (V)
2001 Machine-Made Textile Floor Coverings
- Determination of Dimensional Changes
After Exposure to Heat and/or Water (L)
2001 Imaging Materials - Processed
Photographic Films, Plates and Papers Filing Enclosures and Storage Containers
Supersedes BS ISO 10214:1991; (H)
2000 Imaging Materials - Photographic Films
- Specifications for Safety Film Supersedes
BS ISO 543: 1990; (H)
200 Petroleum and Natural Gas Industries Offshore Production Installations Guidelines on Tools and Techniques for
Hazard Identification and Risk Assessment
(Q)
2000 Imaging Materials - Photographic Films
BS ISO 18908
BS ISO 18915
BS ISO 18917
BS ISO 10542-2
BS ISO 10563
BS ISO 10563
BS ISO 10578
BS ISO 10579
BS ISO 10585
BS ISO 10586
and Papers - Wedge Test for Brittleness
Supersedes BS ISO 6077: 1993; (H)
2000 Imaging Materials - Photographic Film
- Determination of Folding Endurance (H)
2000 Imaging Materials - Methods for the
Evaluation of the Effectiveness of Chemical
Conversion of Silver Images Against
Oxidation Supersedes BS ISO 12206: 1995;
(H)
1999 Photography - Determination of
Residual Thiosulfate and Other Related
Chemicals in Processed Photographic
Materials - Methods Using Iodine-Amylose,
Methylene Blue and Silver Sulfide
Supersedes BS ISO 417: 1993; (H)
2001 Technical Systems and Aids for
Disabled or Handicapped Persons Wheelchair Tiedown and Occupant-Restraint
Systems - Part 2: Four-Point Strap-Type
Tiedown Systems (N)
1991 Building Construction - Sealants for
Joints - Determination of Change in Mass
and Volume (R)
1991 Amd 1 Building Construction - Sealants
for Joints - Determination of Change in Mass
and Volume AMD 9869; January 1998;
Renumbered as BS EN ISO 10563: 1998; (R)
1992 Technical Drawings - Tolerancing of
Orientation and Location - Projected
Tolerance Zone This BS Reproduces
Verbatim ISO 10578:1992 and Implements it
as the UK National Standard. Together with
BS 8888 and Other Implemented European
and International S
1993 Technical Drawings - Dimensioning
and Tolerancing Non-Rigid Parts This BS
Reproduces Verbatim ISO 10579:1993 and
Implements it as the UK Natinal Standard.
TOgether with BS 8888 and Other
Implemented European and International
Standards Listed in Anne
1996 Information and Documentation Armenian Alphabet Coded Character Set for
Bibliographical Information Interchange (S)
1996 Information and Documentation Georgian Alphabet Coded Character Set for
BS ISO 10587
BS ISO 10590
BS ISO 10590
BS ISO 10591
BS ISO 10594
BS ISO 10658
BS ISO 10663
BS ISO 10725
BS ISO 10591
BS ISO 10724-2
BS ISO 10724-2
Bibliographical Information Interchange (S)
2000 Metallic and Other Inorganic Coatings Test for Residual Embrittlement in Both
Metallic-Coated and Uncoated ExternallyThreaded Articles and Rods - Inclined Wedge
Method (F)
1991 Building Construction - Sealants Determination of Adhesion/Cohesion
Properties at Maintained Extension After
Immersion in Water (R)
1991 Amd 1 Building Construction - Sealants
- Determination of Adhesion/Cohesion
Properties at Maintained Extension After
Immersion in Water AMD 9868; January 15,
1998; Renumbered as BS EN ISO 10590:
1998; (R)
1991 Building Construction - Sealants Determination of Adhesion/Cohesion
Properties After Immersion in Water (R)
1997 Micrographics - Rotary Camera
Systems - Test Target for Checking
Performance (H)
1996 Industrial Trucks Operating in Special
Conditions of Stacking with Load Laterally
Displaced by Powered Devices - Additional
Stability Test (E)
1999 Hexagon Nuts with Flange - Fine Pitch
Thread (E)
2000 Acceptance Sampling Plans and
Procedures for the Inspection of Bulk
Materials (G)
1991 Amd 1 Building Construction - Sealants
- Determination of Adhesion/Cohesion
Properties After Immersion in Water AMD
9867; January 15, 1998; Renumbered as BS
EN ISO 10591: 1998; (R)
1998 Plastics - Injection Moulding of Test
Specimens of Thermosetting Powder
Moulding Compounds (PMCs) - Part 2:
Small Plates Together with BS ISO 10724-1:
1998, it Supersedes BS 2782-9: Method 911:
1995; Renumbered as BS EN ISO 10724-4:
2001; (V)
1998 Amd 1 Plastics - Injection Moulding of
Test Specimens of Thermosetting Powder
Moulding Compounds (PMCs) - Part 2:
BS ISO 10754
BS ISO 10959
BS ISO 10766
BS ISO 10767-1
BS ISO 10767-2
BS ISO 10767-3
BS ISO 10816-5
BS ISO 11498
BS ISO 11858
BS ISO 10817-1
BS ISO 10834
BS ISO 10838-1
Small Plates AMD 13401: October 23, 2001;
Together with BS ISO 10724-1: 1998, it
Supersedes BS 2782-9: Method 911: 1995;
Renumbered as B
1996 Information and Documentation Extension of the Cyrillic Alphabet Coded
Character Set for Non-Slavic Languages for
Bibliographic Information Interchange (S)
2000 Aerospace - MJ Threads - Gauging (S)
1996 Hydraulic Fluid Power - Cylinders Housing Dimensions for RectangularSection-Cut Bearing Rings for Pistons and
Rods (E)
1996 Hydraulic Fluid Power - Determination
of Pressure Ripple Levels Generated in
Systems and Components Part 1: Precision
Method for Pumps (Q)
1999 Hydraulic Fluid Power - Determination
of Pressure Ripple Levels Generated in
Systems and Components - Part 2: Simplified
Method for Pumps (Q)
1999 Hydraulic Fluid Power - Determination
of Pressure Ripple Levels Generated in
Systems and Components - Part 3: Method
for Motors (E)
2001 Mechanical Vibration - Evaluation of
Machine Vibration by Measurements on
Non-Rotating Parts - Part 5: Machine Sets in
Hydraulic Power Generating and Pumping
Plants (Q)
1997 Dental Handpieces - Dental LowVoltage Electric Motors (N)
1999 Textile Floor Coverings Determination of Friability of Attached
Foams (L)
1998 Rotating Shaft Vibration Measuring
Systems - Part 1: Relative and Absolute
Sensing of Radial Vibration (Q)
1992 Textile Floor Coverings - NonDestructive Measurement of Pile Thickness
Above the Backing - WRONZ Gauge
Method (L)
2000 Mechanical Fittings for Polyethylene
Piping Systems for the Supply of Gaseous
Fuels - Part 1: Metal Fittings for Pipes of
Nominal Outside Diameter Less than or
BS ISO 10838-2
BS ISO 10838-3
BS ISO TR 10840
BS ISO TR 10840
BS ISO 10931-1
BS ISO 10931-2
BS ISO 10931-3
BS ISO 10945
BS ISO 10946
BS ISO 10962
BS ISO 10998
BS ISO 11021
BS ISO 11023
BS ISO 11042-1
BS ISO 11042-2
Equal to 63mm (E)
2000 Mechanical Fittings for Polyethylene
Piping Systems for the Supply of Gaseous
Fuels - Part 2: Metal Fittings for Pipes of
Nominal Outside Diameter Greater than
63mm (E)
2001 Mechanical Fittings for Polyethylene
Piping Systems for the Supply of Gaseous
Fuels - Part 3: Thermoplastic Fittings for
Pipes of Nominal Outside Diameter Less
Than or Equal to 63mm (E)
1993 Plastics - Burning Behaviour Guidance for Development and Use of Fire
Tests (V)
1993 Amd 1 Plastics - Burning Behaviour Guidance for Development and Use of Fire
Tests (AMD 9111) June 15, 1996 (V)
1997 Plastics Piping Systems for Industrial
Applications - Poly(Vinylidene Fluoride)
Part 1: General (V)
1997 Plastics Piping Systems for Industrial
Applications - Poly(Vinylidene Fluoride)
Part 2: Pipes (V)
1996 Plastics Piping Systems for Industrial
Applications - Poly(Vinylidene Fluoride)
Part 3: Fittings (V)
1994 Hydraulic Fluid Power - Gas-Loaded
Accumulators - Dimensions of Gas Ports
Supersedes BS 7201-2:1995; (E)
1999 Hydraulic Fluid Power - Gas-Loaded
Accumulators with Separator - Selection of
Preferred Hydraulic Ports (E)
2001 Securities and Related Financial
Instruments - Classification of Financial
Instruments (CFI Code) (S)
1995 Agricultural Wheeled Tractors Steering Requirements (E)
1999 Essential Oils - Determination of Water
Content - Karl Fischer Method (W)
1999 Liquorice Extracts (Glycyrrhiza Glabra
L.) - Determination of Glycyrrhizic Acid
Content - Method Using High-Performance
Liquid Chromatography (W)
1996 Gas Turbines - Exhaust Gas Emission
Part 1: Measurement and Evaluation (Q)
1996 Gas Turbines - Exhaust Gas Emission
BS ISO 11076
BS ISO 11086
BS ISO 11093-4
BS ISO 11093-6
BS ISO 11108
BS ISO 11170
BS ISO 11171
BS ISO 11195
BS ISO 11235
BS ISO TR 11255
BS ISO 11312
BS ISO 11323
BS ISO 11359-1
BS ISO 11314
BS ISO 11315-3
BS ISO 11316
BS ISO 11345
Part 2: Automated Emission Monitoring (Q)
2000 Corr 1 Aerospace - Aircraft DeIcing/Anti-Icing Methods with Fluids CORR
13319:September 2001; (S)
1996 Gas Turbines - Vocabulary (G)
1997 Paper and Board - Testing of Cores Part
4: Measurement of Dimensions (H)
1996 Paper and Board - Testing of Cores Part
6: Determination of Bending Strength by the
Three-Point Method (H)
1996 Information and Documentation Archival Paper - Requirements for
Permanence and Durability (G)
1995 Hydraulic Fluid Power - Filter
Elements - Procedure for Verifying
Performance Characteristics (Q)
1999 Hydraulic Fluid Power - Calibration of
Automatic Particle Counters for Liquids
Supersedes BS 5540-2: 1992; (E)
1995 Gas Mixers for Medical Use - StandAlone Gas Mixers (W)
1999 Rubber Compounding Ingredients Sulfenamide Accelerators - Test Methods (V)
1994 Applicability of Hard Cutting Materials
for Machining by Chip Removal Information Additional to ISO 513
Designation (F)
2000 Photography - Sheets of Sensitized
Material for the Pre-Press Industry Dimensions and Related Requirements (H)
1996 Iron Ores - Vocabulary (V)
1999 Plastics - Thermomechanical Analysis
(TMA) - Part 1: General Principles (V)
1995 Photography - Projectors - Image
Size/Projection Distance Calculations (H)
1999 Photography - Projection in Indoor
Rooms - Part 3: Classification of
Transmitting Projection Screens and
Measurement of Their Transmitted
Luminance Levels (H)
1999 Photography - Projection of Still
Pictures - Measuring Methods for the
Evaluation of Imaging Properties (H)
1997 Rubber - Assessment of Carbon Black
Dispersion - Rapid Comparative Methods
Also Numbered as BS 903-A65: 1998; (V)
BS ISO 11357-2
BS ISO 11357-3
BS ISO 11357-5
BS ISO 11359-2
BS ISO 11376
BS ISO 11376
BS ISO 11378-1
BS ISO 11399
BS ISO 11399
BS ISO 11403-1
BS ISO 11403-2
BS ISO 11403-2
BS ISO 11408
1999 Plastics - Differential Scanning
Calorimetry (DSC) - Part 2: Determination of
Glass Transition Temperature (V)
1999 Plastics - Differential Scanning
Calorimetry (DSC) - Part 3: Determination of
Temperature and Enthalpy of Melting and
Crystallization (V)
1999 Plastics - Differential Scanning
Calorimetry (DSC) - Part 5: Determination of
Characteristic Reaction-Curve Temperatures
and Times, Enthalpy of Reaction and Degree
of Conversion (V)
1999 Plastics - Thermomechanical Analysis
(TMA) - Part 2: Determination of Coefficient
of Linear Thermal Expansion and Glass
Transition Temperature (V)
1997 Plastics - Epoxy Resins and Glycidyl
Esters - Determination of Inorganic Chlorine
(V)
1997 Amd 1 Plastics - Epoxy Resins and
Glycidyl Esters - Determination of Inorganic
Chlorine AMD 13327: September 18, 2001;
Renumbered as BS EN ISO 11376: 2001; (V)
2000 Textile Floor Coverings - Laboratory
Soiling Tests - Part 1: Kappasoil Test (L)
1995 Ergonomics of the Thermal
Environment - Principles and Application of
Relevant International Standards (N)
1995 Amd 1 Ergonomics of the Thermal
Environment - Principles and Application of
Relevant International Standards AMD
13444: October 29, 2001; Renumbered as BS
EN ISO 11399:2001; (N)
1994 Plastics - Acquisition and Presentation
of Comparable Multipoint Data - Part 1:
Mechanical (V)
1995 Plastics - Acquisition and Presentation
of Comparable Multipoint Data - Part 2:
Thermal and Processing Properties (V)
1995 Amd 1 Plastics - Acquisition and
Presentation of Comparable Multipoint Data
- Part 2: Thermal and Processing Properties
AMD 10691; February 2000; Renumbered as
BS EN ISO 11403-2: 2000; (V)
1999 Chemical Conversion Coatings - Black
Oxide Coating on Iron and Steel -
BS ISO 11424
BS ISO 11431
BS ISO 11432
BS ISO 11432
BS ISO 11442-5
BS ISO TR 11444
BS ISO 11450
BS ISO 11461
BS ISO 11462-1
BS ISO 11463
BS ISO 11475
BS ISO 11476
BS ISO 11562
BS ISO 11682
BS ISO 11562
Specification and Test Methods (W)
1996 Rubber Hoses and Tubing for Air and
Vacuum Systems for Internal-Combustion
Engines - Specification (E)
1993 Building Construction - Sealants Determination of Adhesion/Cohesion
Properties After Exposure to Artificial Light
Through Glass (R)
1993 Building Construction - Sealants Determination of Resistance to Compression
(R)
1993 Amd 1 Building Construction - Sealants
- Determination of Resistance to
Compression AMD 9866; January 15, 1998;
Renumbered as BS EN ISO 11432: 1998; (R)
1999 Technical Product Documentation Handling of Computer-Based Technical
Information - Part 5: Documentation in the
Conceptual Design Stage of the Development
Phase (G)
1995 Quality of Sawn Wood Used for the
Construction of Pallets (V)
1999 Equipment for Harvesting and
Conservation - Round Balers - Terminology
and Commercial Specifications (E)
2001 Soil Quality - Determination of Soil
Water Content as a Volume Fraction Using
Coring Sleeves - Gravimetric Method (H)
2001 Guidelines for Implementation of
Statistical Process Control (SPC) - Part 1:
Elements of SPC (Q)
1995 Corrosion of Metals and Alloys Evaluation of Pitting Corrosion (V)
1999 Paper and Board - Determination of
CIE Whiteness, D65/10 Degrees (Outdoor
Daylight) (H)
2000 Paper and Board - Determination of
CIE Whiteness, C/2 Degrees (Indoor
Illumination Conditions) (H)
1996 Geometric Product Specifications
(GPS) - Surface Texture: Profile Method Metrological Characteristics of Phase Correct
Filters (H)
1993 Brush-Cutters and Grass Trimmers Technical Data (F)
1996 Amd 1 Geometric Product
BS ISO 11566
BS ISO 11567
BS ISO 11600
BS ISO 11648-2
BS ISO/TR 11696-1
BS ISO/TR 11696-2
BS ISO 11698-1
BS ISO 11698-2
BS ISO 11727
BS ISO 11752
BS ISO 11785
BS ISO 11843-1
BS ISO 11758
BS ISO 11758
Specifications (GPS) - Surface Texture:
Profile Method - Metrological Characteristics
of Phase Correct Filters AMD 9952; May
1998; Renumbered as BS EN ISO 11562:
1998; (H)
1996 Carbon Fibre - Determination of the
Tensile Properties of Single-Filament
Specimens (V)
1995 Carbon Fibre - Determination of
Filament Diameter and Cross-Sectional Area
(V)
1993 Building Construction - Sealants Classification and Requirements (R)
2001 Statistical Aspects of Sampling from
Bulk Materials - Part 2: Sampling of
Particulate Materials (H)
1999 Uses of Reaction to Fire Test Results Part 1: Application of Test Results to Predict
Fire Performance of Internal Linings and
Other Building Products (R)
1999 Uses of Reaction to Fire Test Results Part 2: Fire Hazard Assessment of
Construction Products (R)
2000 Micrographics - Methods of Measuring
Image Quality Produced by Aperture Card
Scanners - Part 1: Characteristics of the Test
Images (G)
2000 Micrographics - Methods of Measuring
Image Quality Produced by Aperture Card
Scanners - Part 2: Quality Criteria and
Control (G)
1999 Pneumatic Fluid Power - Identification
of Ports and Control Mechanisms of Control
Valves and Other Components (Q)
2000 Flexible Cellular Polymeric Materials Moulded and Extruded Sponge or Expanded
Cellular Rubber Products - Compressibility
Test on Finished Parts (V)
1996 Radio-Frequency Identification of
Animals - Technical Concept (S)
1997 Capability of Detection - Part 1: Terms
and Conditions (G)
1995 Rubber and Plastics Hoses - Exposure
to a Xenon Arc Lamp - Determination of
Changes in Colour and Appearance (V)
1995 Amd 1 Rubber and Plastics Hoses -
BS ISO TR 11761
BS ISO TR 11762
BS ISO 11788-3
BS ISO 11798
BS ISO TR 11776
BS ISO 11929-4
BS ISO 11933-3
BS ISO 11943
BS ISO 11948-1
Exposure to a Xenon Arc Lamp Determination of Changes in Colour and
Appearance AMD 9708; December 15, 1997;
Renumbered as BS EN ISO 11758: 1997; (V)
1992 Light-Gauge Metal Containers - Round
Open-Top Cans Classification of Can Sizes
by Construction Type (Replaces BS 6992:
Part 1: 1988, Part 2: 1991 Part 3: 1988, BS
6992 : Part 4: 1989, Part 5 :1988) (H)
1992 Light-Gauge Metal Containers - Round
Open- Top Cans for Liquid Products with
Added Gas - Classification of Can Sizes by
Construction Type (Replaces BS 6992: Part
1: 1991, Part 2: 1991, Part 3: 1988,Part
4:1989 Part 5: 1988)(H)
2000 Electronic Data Interchange between
Information Systems in Agriculture Agricultural Data Element Dictionary - Part
3: Pig Farming (S)
1999 Information and Documentation Permanence and Durability of Writing,
Printing and Copying on Paper Requirements and Test Methods (H)
1992 Light-Gauge Metal Containers - NonRound Open-Top Cans - Cans Defined by
their Nominal Capacities (Replaces BS 6922:
Part 1:1988, Part 2:1991, Part 3:1988, Part
4:1989 Part 5:1988) (H)
2001 Determination of the Detection Limit
and Decision Threshold for Ionizing
Radiation Measurements - Part 4:
Fundamentals and Application to
Measurements by Use of Linear-Scale
Analogue Ratemeters, without the Influence
of Sample Treatment (H)
1998 Components for Containment
Enclosures - Part 3: Transfer Systems Such
as Plain Doors, Airlock Chambers, Double
Door Transfer Systems, Leaktight
Connections for Waste Drums (N)
1999 Hydraulic Fluid Power - On-Line
Automatic Particle-Counting Systems for
Liquids - Methods of Calibration and
Validation (E)
1996 Urine-Absorbing Aids Part 1: WholeProduct Testing (N)
BS ISO 11986
BS ISO 11986
BS ISO TR 11991
BS ISO 12000
BS ISO 12006-2
BS ISO/TR 12031
BS ISO 12040
BS ISO 12058-1
BS ISO 12080-1
BS ISO 12080-2
BS ISO 12085
BS ISO 12085
BS ISO 12086-1
1999 Amd 1 Ophthalmic Optics - Contact
Lenses and Contact Lens Care Products Guidelines for the Determination of
Preservative Uptake and Release AMD
13224: June 2001; Renumbered as BS EN
ISO 11986:2001; (N)
1999 Ophthalmic Optics - Contact Lenses
and Contact Lens Care Products - Guidelines
for Determination of Preservative Uptake and
Release Also Numbered as BS 720821:1999; (N)
1995 Guidance on Airway Management
During Laser Surgery of Upper Airway (N)
2000 Plastics/Rubber - Polymer Dispersions
and Rubber Latices (Natural and Synthetic) Definitions and Review of Test Methods (V)
2001 Building Construction - Organization of
Information About Construction Works - Part
2: Framework for Classification of
Information (R)
2000 Micrographics - Inspection of SilverGelatin Microforms for Evidence of
Deterioration (H)
1997 Graphic Technology - Prints and
Printing Inks - Assessment of Light Fastness
Using Filtered Xenon Arc Light (H)
1997 Plastics - Determination of Viscosity
Using a Falling-Ball Viscometer Part 1:
Inclined-Tube Method (V)
2000 Dried Skimmed Milk - Determination
of Vitamin A Content - Part 1: Colorimetric
Method (W)
2000 Dried Skimmed Milk - Determination
of Vitamin A Content - Part 2: Method Using
High-Performance Liquid Chromatography
(W)
1996 Geometric Product Specification (GPS)
- Surface Texture: Profile Method - Motif
Parameters (H)
1996 Amd 1 Geometric Product Specification
(GPS) - Surface Texture: Profile Method Motif Parameters AMD 9951; May 1998;
Renumbered as BS EN ISO 12085: 1998; (H)
1995 Plastics - Fluoropolymer Dispersions
and Moulding and Extrusion Materials Part
1: Designation System and Basis for
BS ISO 12086-2
BS ISO 12124
BS ISO 12132
BS ISO 12142
BS ISO 12086-1
BS ISO 12086-2
BS ISO 12151-1
BS ISO 12151-3
BS ISO 12165
BS ISO 12218
BS ISO 12231
BS ISO 12234-1
BS ISO 12234-2
Specifications (V)
1995 Plastics - Fluoropolymer Dispersions
and Moulding and Extrusion Materials Part
2: Preparation of Test Specimens and
Determination of Properties (V)
2001 Acoustics - Procedures for the
Measurement of Real-Ear Acoustical
Characteristics of Hearing Aids (H)
1999 Plain Bearings - Quality Assurance of
Thin-Walled Half Bearings - Design FMEA
(E)
2001 Electronic Imaging - Media Error
Monitoring and Reporting Techniques for
Verification of Stored Data on Optical Digital
Data Disks (S)
1995 Amd 1 Plastics - Fluoropolymer
Dispersions and Moulding and Extrusion
Materials - Part 1: Designation System and
Basis for Specifications AMD 10638: March
2001; Renumbered as BS EN ISO 12086-1:
2001; (V)
1995 Amd 1 Plastics - Fluoropolymer
Dispersions and Moulding and Extrusion
Materials Part 2: Preparation of Test
Specimens and Determination of Properties
AMD 10637: March 2001; Renumbered as
BS EN ISO 12086-2: 2001; (V)
1999 Connections for Hydraulic Fluid Power
and General Use - Hose Fittings - Part 1:
Hose Fittings with ISO 8434-3 O-Ring FaceSeal Ends (E)
1999 Connections for Hydraulic Fluid Power
and General Use - Hose Fittings - Part 3:
Hose Fittings with ISO 6162 Flange Ends (E)
2000 Tools for Moulding - Components of
Compression and Injection Moulds and
Diecasting Dies - Terms and Symbols (F)
1997 Graphic Technology - Process Control Offset Platemaking (H)
1997 Photography - Electronic Still Picture
Cameras - Terminology (H)
2001 Electronic Still-Picture Imaging Removable Memory - Part 1: Basic
Removable-Memory Module (H)
2001 Electronic Still-Picture Imaging Removable Memory Part 2: TIFF/EP Image
BS ISO 12238
BS ISO 12277
BS ISO 12307-2
BS ISO 12333
BS ISO 12334
BS ISO 12334
BS ISO 12368
BS ISO 12606
BS ISO 12608
BS ISO 12611
BS ISO 12612
BS ISO 12651
BS ISO 12656
BS ISO 12634
Data Format (S)
2001 Pneumatic Fluid Power - Directional
Control Valves - Measurement of Shifting
Time (E)
2000 Aerospace - Gang Channel, SelfLocking,Floating, Standard Series, with
Counterbore, Classifications: 1 100 MPa (at
Ambient Temperature)/120C, 1 100 MPa (at
Ambient Temperature)/235C and 1 100 MPa
(at Ambient Temperature)/425C Dimensions (S)
2000 Plain Bearings - Checking of Wrapped
Bushes - Part 2: Checking the Insider
Diameter (E)
2000 Aerospace - Constant Displacement
Hydraulic Motors - General Specifications
for 35 000 kPa Systems (S)
2000 Aerospace - Hydraulic, PressureCompensated, Variable Delivery Pumps General Requirements for 35 000 kPa
Systems (S)
2000 Corr 1 Aerospace - Hydraulic, PressureCompensated, Variable Delivery Pumps General Requirements for 35 000 kPa
Systems CORR 10966; June 2000; (S)
2001 Agricultural Vehicles - Mechanical
Hook-Type Connections on Towing Vehicles
- Test Methods and Requirements (E)
1997 Cinematography - Care and
Preservation of Magnetic Audio Recordings
for Motion-Pictures and Television (H)
1996 Cinematography - Room and Surround
Conditions for Evaluating Television Display
from Telecine Reproduction (H)
1997 Cinematography - Audio Head Tones
for Use in International Exchange of 35 mm
Magnetic Film Masters - Specifications and
Location (H)
1997 Cinematography - Interchange of PostProduction Materials (H)
1999 Electronic Imaging - Vocabulary (G)
2001 Micrographics - Use of Bar Codes on
Aperture Cards (S)
1996 Graphic Technology - Determination of
Tack of Paste Inks and Vehicles by a Rotary
Tackmeter (H)
BS ISO 12635
BS ISO 12637-5
BS ISO 12640
BS ISO 12642
BS ISO 12644
BS ISO 12645
BS ISO 12647-1
BS ISO 12647-2
BS ISO 12653-1
BS ISO 12653-2
BS ISO 12676
BS ISO 12686
BS ISO 12771
BS ISO TR 12776
BS ISO 13050
1996 Graphic Technology - Plates for Offset
Printing - Dimensions (H)
2001 Graphic Technology - Multilingual
Terminology of Printing Arts - Part 5: Screen
Printing Terms Supersedes BS ISO 12637-2:
1997; (H)
1997 Graphic Technology - Prepress Digital
Data Exchange - CMYK Standard Colour
Image Data (CMYK/SCID) Document
Contains a Diskette; (S)
1996 Graphic Technology - Prepress Digital
Data Exchange - Input Data for
Characterization of 4-Colour Process Printing
(H)
1996 Graphic Technology - Determination of
Rheological Properties of Paste Inks and
Vehicles by the Falling Rod Viscometer (H)
1998 Graphic Technology - Process Control Certified Reference Material for Opaque
Area Calibration of Transmission
Densitometers (H)
1996 Graphic Technology - Process Control
for the Manufacture of Half-Tone Colour
Separations, Proof and Production Prints Part
1: Parameters and Measurement Methods (H)
1996 Graphic Technology - Process Control
for the Manufacture of Half-Tone Colour
Separations, Proof and Production Prints Part
2: Offset Lithographic Processes (H)
2000 Electronic Imaging - Test Target for the
Black-and-White Scanning of Office
Documents - Part 1: Characteristics (S)
2000 Electronic Imaging - Test Target for the
Black-and-White Scanning of Office
Documents - Part 2: Method of Use (S)
2000 Refractory Products - Determination of
Resistance to Carbon Monoxide (F)
1999 Metallic and Other Inorganic Coatings Automated Controlled Shot-Peening of
Metallic Articles Prior to Nickel,
Autocatalytic Nickel or Chromium Plating,
or as a Final Finish (F)
1997 Plastic Laboratory Ware Disposable
Serological Pipettes (H)
1995 Pallets - Slip Sheets (H)
1999 Curvilinear Toothed Synchronous Belt
BS ISO 12777-1
BS ISO 12794
BS ISO 12922
BS ISO 12922
BS ISO/TS 12927
BS ISO 12992
BS ISO 13226
BS ISO 13310
BS ISO 13311
BS ISO/TS 12928
BS ISO 13215-2
BS ISO 13312
Drive Systems (E)
1994 Methods of Test for Pallet Joints Part 1:
Determination of Bending Resistance of
Pallet Nails, Other Dowel-Type Fasteners
and Staples Renumbered as BS EN ISO
12777-1: 1997; (H)
2000 Nuclear Energy - Radiation Protection Individual Thermoluminescence Dosemeters
for Extremities and Eyes (Q)
1999 Corr 1 Lubricants, Industrial Oils and
Related Products (Class L) - Family H
(Hydraulic Systems) - Specifications for
Categories HFAE, HFAS, HFB, HFC, HFDR
and HFDU CORR 13158: June 2001; (W)
1999 Lubricants, Industrial Oils and Related
Products (Class L) - Family H (Hydraulic
Systems) - Specifications for Categories
HFAE, HFAS, HFB, HFC, HFDR and
HFDU (W)
1999 Lubricants, Industrial Oils and Related
Products (Class L) - Family M
(Metalworking) - Guidelines for Establishing
Specifications ISO/TS 12927: 1999; (W)
1995 Plastics - Vertical Flame Spread
Determination for Film and Sheet (V)
1999 Rubber - Standard Reference
Elastomers (SRE's) for Characterizing the
Effect of Liquids on Vulcanized Rubbers (V)
1997 Iron Ores - Determination of Zinc
Content - Flame Atomic Absorption
Spectrometric Method (V)
1997 Iron Ores - Determination of Lead
Content - Flame Atomic Absorption
Spectrometric Method (V)
1999 Lubricants, Industrial Oils and Related
Products (Class L) - Family R (Products for
Temporary Protection Against Corrosion) Guidelines for Establishing Specifications
ISO/TS 12928:1999; (W)
1999 Road Vehicles - Reduction of Misuse
Risk of Child Restraint Systems - Part 2:
Requirements and Test Procedures for
Correct Installation (Panel Method) (E)
1997 Iron Ores - Determination of Potassium
Content - Flame Atomic Absorption
Spectrometric Method Supersedes BS 7020 :
BS ISO 13313
BS ISO 13317-1
BS ISO TR 13387-5
BS ISO 13443
BS ISO 8051
BS ISO 8066-2
BS ISO 8085-1
BS ISO 8374
BS ISO 8085-2
BS ISO 8085-3
BS ISO 8097
BS ISO 8116-9
Part 14:1988; (V)
1997 Iron Ores - Determination of Sodium
Content - Flame Atomic Absorption
Spectrometric Method Supersedes BS 7020 :
Part 14:1988; (V)
2001 Determination of Particle Size
Distribution by Gravitational Liquid
Sedimentation Methods - Part 1: General
Principles and Guidelines Together with BS
ISO 13317-2:2001 and BS ISO 13317-3:2001
it Supersedes BS 3406-2:1984; (G)
1999 Fire Safety Engineering - Part 5:
Movement of Fire Effluents (G)
1996 Natural Gas - Standard Reference
Conditions (W)
1999 Long Shank Taps with Nominal
Diameters from M3 to M10 - Full-Diameter
Shank Taps with Recess (F)
2001 Rubber and Plastics Hoses and Hose
Assemblies for Automotive Air Conditioning
- Specification - Part 2: Refrigerant 134a (E)
(FAULTY STANDARD) 2001 Corr 1
Polyethylene Fittings for Use with
Polyethylene Pipes for the Supply of Gaseous
Fuels - Metric Series - Specifications - Part 1:
Fittings for Socket Fusion Using Heated
Tools CORR 13612: December 3, 2001; (E)
2001 Photography - Determination of ISO
Safelight Conditions (H)
2001 Polyethylene Fittings for Use with
Polyethylene Pipes for the Supply of Gaseous
Fuels - Metric Series - Specifications - Part 2:
Spigot Fittings for Butt Fusion, for Socket
Fusion Using Heated Tools and for Use with
Electrofusion Fittings (E)
2001 Polyethylene Fittings for Use with
Polyethylene Pipes for the Supply of Gaseous
Fuels - Metric Series - Specifications - Part 3:
Electrofusion Fittings (E)
2001 Aircraft - Minimum Airworthiness
Requirements and Test Conditions for
Certified Air Cargo Unit Load Devices
Superseded BS 2M 72:1996; (S)
1991 Textile Machinery and Accessories Beams for Winding - Part 9: Dyeing Beams
for Textile Fabrics (L)
BS ISO 8118
BS ISO 8121
BS ISO 8126
BS ISO 8127-2
BS ISO 8132
BS ISO 8133
BS ISO 8135
BS ISO 8136
BS ISO 8137
BS ISO 8138
BS ISO 8178-7
BS ISO 8178-8
BS ISO 8178-9
BS ISO 8225
1986 Weaving Machines - Temple Cylinders
(Supersedes BS 6877: 1987) (L)
1986 Textile Machinery - Knitting Machines
- Nameplate Information (L)
2000 Micrographics - Duplicating Film,
Silver, Diazo and Vesicular - Visual Density
- Specifications and Measurement Supersedes
BS 6872: 1987; (H)
1999 Micrographics - A6 Size Microfilm
Jackets - Part 2: Other Types of Jacket for
16mm and 35mm Microfilm Supersedes BS
5632:1978; (H)
1986 Hydraulic Fluid Power - Single Rod
Cylinders, 160 Bar (16 MPa) Medium and
250 Bar (25 MPa) Series - Mounting
Dimensions for Accessories (E)
1991 Hydraulic Fluid Power - Single Rod
Cylinders, 16 MPa (160 Bar) Compact Series
- Accessory Mounting Dimensions (E)
1999 Hydraulic Fluid Power - Single Rod
Cylinders, 16 MPa (160 Bar) Medium and 25
MPa (250 Bar) Series - Tolerances (E)
1986 Hydraulic Fluid Power - Single Rod
Cylinders, 160 Bar (16 MPa) Medium Series
- Port Dimensions (E)
1986 Hydraulic Fluid Power - Single Rod
Cylinders, 250 Bar (25 MPa) Series - Port
Dimensions (E)
1998 Hydraulic Fluid Power - Single Rod
Cylinders, 16 MPA (160 Bar) Compact
Series - Port Dimensions (E)
1996 Reciprocating Internal Combustion
Engines - Exhaust Emission Measurement
Part 7: Engine Family Determination (E)
1996 Reciprocating Internal Combustion
Engines - Exhaust Emission Measurement
Part 8: Engine Group Determination (E)
2000 Reciprocating Internal Combustion
Engines - Exhaust Emission Measurement Part 9: Test Cycles and Test Procedures for
Test-Bed Measurement of Exhaust Gas
Smoke Emissions from Compression Ignition
Engines Operating Under Transient
Conditions (E)
1995 Photography - Ammonia-Processed
Diazo Photographic Film - Specifications for
BS ISO 8254-1
BS ISO 8312
BS ISO 8351-1
BS ISO 8351-2
BS ISO 8367-1
BS ISO 8367-2
BS ISO 8368
BS ISO 8406
BS ISO 8432
BS ISO 8573-1
BS ISO 8434-4
BS ISO 8434-4
BS ISO 8443
Stability (H)
1999 Paper and Board - Measurement of
Specular Gloss - Part 1: 75 Degree Gloss
with a Converging Beam, TAPPI Method (H)
1999 Rubber Compounding Ingredients Stearic Acid - Definition and Test Methods
(V)
1994 Packaging - Method of Specification
for Sacks Part 1: Paper Sacks Renumbered as
BS EN ISO 8351-1 : 1997; (H)
1994 Packaging - Method of Specification
for Sacks Part 2: Sacks Made from
Thermoplastic Flexible Film Renumbered as
BS EN ISO 8351-2 : 1997; (H)
1993 Packaging - Dimensional Tolerances
for General Purpose Sacks Part 1: Paper
Sacks Renumbered as BS EN ISO 8367-1 :
1997; (H)
1993 Packaging - Dimensional Tolerances
for General Purpose Sacks Part 2: Sacks
Made from Thermoplastic Flexible Film
Renumbered as BS EN ISO 8367-2 : 1997;
(H)
1999 Hydrometric Determinations - Flow
Measurements in Open Channels Using
Structures - Guidelines for the Selection of
Structure (H)
2001 Tools for Moulding - Mould Bases Round Locating Elements and Spacers
Supersedes BS 7564-1:1992; (F)
1987 Essential Oils - Analysis by High
Performance Liquid Chromatography General Method (W)
2001 Compressed Air - Part 1: Contaminants
and Purity Classes (Q)
1995 Metallic Tube Connections for Fluid
Power and General Use Part 4: 24 Degree
Cone Connectors with O-Ring Weld-On
Nipples (E)
1995 Amd 1 Metallic Tube Connections for
Fluid Power and General Use Part 4: 24
Degree Cone Connectors with O-Ring WeldOn Nipples AMD 11038; November:2000;
Renumbered as BS EN ISO 8434-4:2000
1999 Rolling Bearings - Radial Ball Bearings
with Flanged Outer Ring - Flange
BS ISO 8486-1
BS ISO 8486-2
BS ISO 8529-1
BS ISO 8532
BS ISO 8529-2
BS ISO 8573-5
BS ISO 8788
BS ISO 9044
BS ISO 8600-1
BS ISO 8605
BS ISO TR 8610
BS ISO 8670-3
BS ISO 9073-6
BS ISO 8697
Dimensions Supersedes BS 5646-7: 1986;
(E)
1996 Bonded Abrasives - Determination and
Designation of Grain Size Distribution: Part
1: Macrogrits F4 to F220 (W)
1996 Bond Abrasives - Determination and
Designation of Grain Size Distribution Part
2: Macrogrits F230 to F1200 (W)
2001 Reference Neutron Radiations - Part 1:
Characteristics and Methods of Production
(H)
1995 Securities - Format for Transmission of
Certificate Numbers (S)
2000 Reference Neutron Radiations - Part 2:
Calibration Fundamentals of Radiation
Protection Devices Related to the Basic
Quantities Characterizing the Radiation Field
(H)
2001 Compressed Air - Part 5: Test Methods
for Oil Vapour and Organic Solvent Content
(Q)
2000 Aerospace - Nuts, Metric - Tolerances
of Form and Position (S)
1999 Industrial Woven Wire Cloth Technical Requirements and Testing (V)
1997 Optics and Optical Instruments Medical Endoscopes and Endoscopic
Accessories Part 1: General Requirements
(N)
2001 Textile-Glass-Reinforced Plastics Sheet Moulding Compound (SMC) - Basis
for Specification (V)
1984 Light Gauge Metal Containers - Round
Vent- Hole Cans with Soldered Ends for
Milk and Milk Products - Capacities and
Related Diameters (H)
2000 Ostomy Collection Bags - Part 3:
Determination of Odour Transmission of
Colostomy and Ileostomy Bags (N)
2000 Textiles - Test Methods for Nonwovens
- Part 6: Absorption (L)
1999 Crude Petroleum and Petroleum
Products - Transfer Accountability Assessment of On Board Quantity (OBQ)
and Quantity Remaining on Board (ROB)
(Q)
BS ISO 8764-1
BS ISO 8802/2
BS ISO 8805
BS ISO 8835-2
BS ISO 8957
BS ISO 9000-2
BS ISO 9019
BS ISO 9022-20
BS ISO 9047
BS ISO 9047
BS ISO 9083
BS ISO 9136-2
BS ISO 9633
BS ISO/TR 9122-3
BS ISO/TR 9122-4
1999 Assembly Tools for Screws and Nuts Screwdrivers for Cross-Recessed Head
Screws - Part 1: Driver Points (F)
1989 Information Processing Systems - Local
Area Networks Part 2: Logical Link Control
1988 Information Processing Systems Computer Graphics - Graphical Kernel
System for Three Dimensions (GKS-3D)
Fuctional Description Supersedes BS EN
28805: 1992; (S)
1999 Inhalational Anaesthesia Systems - Part
2: Anaesthetic Breathing Systems for Adults
Supersedes BS 7734: 1994; (N)
1996 Information and Documentation Hebrew Alphabet Coded Character Sets for
Bibliographic Information Interchange (S)
1997 Quality Management and Quality
Assurance Standards - Part 2: Generic
Guidelines for the Application of ISO 9001,
ISO 9002 and ISO 9003 Supersedes BS 5750
: Part 4: 1994; (G)
1995 Securities - Numbering of Certificates
Supersedes BS 7103: 1989; (G)
1997 Optics and Optical Instruments Environmental Test Methods - Part 20:
Humid Atmosphere Containing Sulfur
Dioxide or Hydrogen Sulfide (H)
1989 Building Construction - Sealants Determination of Adhesion/Cohesion
Properties at Variable Temperatures (T)
1989 Amd 1 Building Construction - Sealants
- Determination of Adhesion/Cohesion
Properties at Variable Temperatures AMD
9870; January 15, 1998; Renumbered as BS
EN ISO 9047: 1998; (T)
2001 Calculation of Load Capacity of Spur
and Helical Gears - Application to Marine
Gears (E)
2000 Abrasive Grains - Determination of
Bulk Density - Part 2: Microgrits (F)
2001 Cycle Chains - Characteristics and Test
Methods (E)
1993 Toxicity Testing of Fire Effluents Part
3: Methods for the Analysis of Gases and
Vapours in Fire Effluents (W)
1993 Toxicity Testing of Fire Effluents Part
BS ISO/TR 9122-2
BS ISO/TR 9122-5
BS ISO/TR 9122-6
BS ISO 9163
BS ISO 9163
BS ISO 9186
BS ISO 9197
BS ISO 9198
BS ISO 10015
BS ISO 10343
BS ISO 9211-4
BS ISO 9236-3
BS ISO 9241-14
4: The Fire Model ( Furnaces and
Combustion Apparatus Used in Small-Scale
Testing) (W)
1990 Toxicity Testing of Fire Effluents Part
2: Guidelines for Biological Assays to
Determine the Acute Inhalation Toxicity of
Fire Effluents (Basic Principles, Criteria and
Methodology) (W)
1993 Toxicity Testing of Fire Effluents Part
5: Prediction of Toxic Effects of Fire
Effluents (W)
1994 Toxicity Testing of Fire Effluents Part
6: Guidance for Regulators and Specifiers on
the Assessment of Toxic Hazard in Fires in
Buildings and Transport (W)
1996 Textile Glass - Rovings - Manufacture
of Test Specimens and Determination of
Tensile Strength of Impregnated Rovings (V)
1996 Amd 1 Textile Glass - Rovings Manufacture of Test Specimens and
Determination of Tensile Strength of
Impregnated Rovings AMD 10351; April 15,
1999; Renumbered as BS EN ISO 9163:
1999; (V)
2001 Graphical Symbols - Test Methods for
Judged Comprehensibility and for
Comprehension (G)
1998 Paper, Board and Pulps - Determination
of Water-Soluble Chlorides Supersedes BS
2924-4: 1990; (H)
2001 Paper, Board and Pulp - Determination
of Water-Soluble Sulfates Supersedes BS
2924-3: 1990; (H)
1999 Quality Management - Guidelines for
Training (G)
1997 Ophthalmic Instruments Ophthalmometers (H)
1996 Optics and Optical Instruments Optical Coatings Part 4: Specific Test
Methods (H)
1999 Photography - Sensitometry of
Screen/Film Systems for Medical
Radiography - Part 3: Determination of
Sensitometric Curve Shape, Speed and
Average Gradient for Mammography (N)
1997 Ergonomic Requirements for Office
BS ISO 9241-14
BS ISO 9276-2
BS ISO 9285
BS ISO 9286
BS ISO 9314-2
BS ISO 9335
BS ISO 9337-1
BS ISO 9362
BS ISO 9403
BS ISO 9462
BS ISO/TR 9547
BS ISO 9337-1
BS ISO 9564-1
BS ISO 9564-2
Work with Visual Display Terminals (VDTs)
Part 14: Menu Dialogues
1997 Amd 1 Ergonomic Requirements for
Office Work with Visual Display Terminals
(VDTs) - Part 14: Menu Dialogues AMD
10974: November 2000; Renumbered as BS
EN ISO 9241-14: 2000; (S)
2001 Representation of Results of Particle
Size Analysis - Part 2: Calculation of
Average Particle Sizes/Diameters and
Moments from Particle Size Distributions (G)
1997 Abrasive Grains and Crude - Chemical
Analysis of Fused Aluminium Oxide (F)
1997 Abrasive Grains and Crude - Chemical
Analysis of Silicon Carbide (F)
1989 Information Processing Systems - Fibre
Distributed Data Interface (FDDI) - Part 2:
Token Ring Media Access Control (MAC)
(Renumbered as BS EN 29314-2: 1995) (S)
1995 Optics and Optical Instruments Optical Transfer Function - Principles and
Procedures of Measurement (H)
1999 Contact Lenses - Determination of
Back Vertex Power - Part 1: Method Using
Focimeter with Manual Focusing (N)
1994 Banking - Banking Telecommunication
Messages - Bank Identifier Codes (S)
2000 Crude Petroleum - Transfer
Accountability - Guidelines for Cargo
Inspection (W)
1993 Alpine Ski-Bindings - Safety
Requirements and Test Methods (L)
1988 Programming Language Processors Test Methods - Guidelines for Their
Development and Acceptability
1999 Amd 1 Contact Lenses - Determination
of Back Vertex Power - Part 1: Method
Using Focimeter with Manual Focusing
AMD 13236:July 2001; Renumbered as BS
EN ISO 9337-1:2001; (N)
1991 Banking - Personal Identification
Number Management and Security - Part 1:
PIN Protection Principles and Techniques
(Renumbered as BS EN 29564-1: 1994) (G)
1991 Banking - Personal Identification
Number Management and Security - Part 2:
BS ISO 9568
BS ISO 9587
BS ISO 9588
BS ISO 9611
BS ISO 9622
BS ISO 9694
BS ISO 9694
BS ISO 9702
BS ISO 9702
BS ISO TR 9705-2
BS ISO 9802
BS ISO 9718
Approved Algorithm(s) for PIN
Encipherment (Renumbered as BS EN
29564-2: 1994) (G)
1993 Cinematography - Background
Acoustic Noise Levels in Theatres, Review
Rooms and Dubbing Rooms (H)
1999 Metallic and Other Inorganic Coatings Pretreatment of Iron or Steel to Reduce the
Risk of Hydrogen Embrittlement (W)
1999 Metallic and Other Inorganic Coatings Post-Coating Treatments of Iron and Steel to
Reduce the Risk of Hydrogen Embrittlement
(F)
1996 Acoustics - Characterization of Sources
of Structure-Borne Sound with Respect to
Sound Radiation from Connected Structures Measurement of Velocity at the Contact
Points of Machinery When Resiliently
Mounted (F)
1999 Whole Milk - Determination of Milkfat,
Protein and Lactose Content - Guidance on
the Operation of Mid-Infrared Instruments
(W)
1996 Dental Phosphate-Bonded Casting
Investments Supersedes BS 5189: Part 2:
1975; (N)
1996 Amd 1 Dental Phosphate-Bonded
Casting Investments AMD 10436; April
1999; Renumbered as BS EN ISO 9694:
1999; Supersedes BS 5189-2: 1975; (N)
1996 Plastics - Amine Epoxide Hardeners Determination of Primary, Secondary and
Tertiary Amine Group Nitrogen Content (V)
1996 Amd 1 Plastics - Amine Epoxide
Hardeners - Determination of Primary,
Secondary and Tertiary Amine Group
Nitrogen Content AMD 10346; April 15,
1999; Renumbered as BS EN ISO 9702:
1999; (V)
2001 Reaction to Fire Tests - Full Scale
Room Tests for Surface Products Part 2:
Technical Background and Guidance (N)
Raw Optical Glass - Vocabulary (H)
1995 Photography - Processed Vesicular
Photographic Film - Specifications for
Stability (H)
BS ISO 9760
BS ISO 9772
BS ISO 9801
BS ISO 9801
BS ISO 9903
BS ISO 9992-1
BS ISO TR 10064-1
BS ISO 10100
BS ISO 10341
BS ISO 9921-1
BS ISO 9924-1
BS ISO TR 10064-2
BS ISO TR 10064-3
BS ISO 10071-1
2000 Aerospace - Fork-Ends, in CorrosionResistant Steel, Swaged on Aircraft Control
Wire Rope, for Rolling Bearings Dimensions and Loads (S)
2001 Cellular Plastics - Determination of
Horizontal Burning Characteristics of Small
Specimens Subjected to a Small Flame (V)
1997 Ophthalmic Instruments - Trial Case
Lenses Supersedes BS 3162: 1959; (H)
1997 Amd 1 Ophthalmic Instruments - Trial
Case Lenses AMD 10609; September 1999;
Renumbered as BS EN ISO 9801: 1999; (H)
1991 Textile Machinery and Accessories Wires for Metallic Card Clothing (L)
1990 Concepts and Structures (Renumbered
as BS EN 29992-1)
1992 Cylindrical Gears - Code of Inspection
Practice Part 1: Inspection of Corresponding
Flanks of Gear Teeth (E)
2001 Hydraulic Fluid Power - Cylinders Acceptance Tests (E)
1997 Ophthalmic Instruments - Refractor
Heads (H)
Ergonomic Assessment of Speech
Communication: Part 1: Speech Interference
Level and Communication Distances for
Persons with Normal Hearing Capacity in
Direct Communication (SIL Method) (N)
2000 Rubber and Rubber Products Determination of the Composition of
Vulcanizates and Uncured Compounds by
Thermogravimetry - Part 1: Butadiene,
Ethylene-Propylene Copolymer and
Terpolymer, Isobutene-Isoprene, Isoprene
and Styrene-Butadiene Rubbers Super
1996 Cylindrical Gears - Code of Inspection
Practice Part 2: Inspection Related to Radial
Composite Deviations, Runout, Tooth
Thickness and Backlash (E)
1996 Cylindrical Gears - Code of Inspection
Practice Part 3: Recommendations Relative
to Gear Blanks, Shaft Centre Distance and
Parallelism of Axes (E)
2001 Tools for Pressing - Ball-Lock Punches
- Part 1: Ball-Lock Punches for Light Duty
(F)
BS ISO 10099
BS ISO 10102
BS ISO 10103
BS ISO 10104
BS ISO 10109-4
BS ISO 10109-7
BS ISO 10109-11
BS ISO 10110-1
BS ISO 10110-2
BS ISO 10110-3
BS ISO 10110-4
BS ISO 10110-5
BS ISO 10110-6
2001 Pneumatic Fluid Power - Cylinders Final Examination and Acceptance Criteria
(E)
2001 Assembly Tools for Screws and Nuts Double-Headed Open-Ended Engineers
Wrenches - Length of Wrenches and
Thickness of the Heads (F)
2001 Assembly Tools for Screws and Nuts Double-Headed, Flat and Offset, Box
Wrenches - Length of Wrenches and
Thickness of the Heads (F)
2001 Assembly Tools for Screws and Nuts Double-Headed, Deep Offset and Modified
Offset, Box Wrenches - Length of Wrenches
and Thickness of the Heads (F)
2001 Optics and Optical Instruments Environmental Requirements - Part 4: Test
Requirements for Telescopic Systems (H)
2001 Optics and Optical Instruments Environmental Requirements - Part 7: Test
Requirements for Optical Measuring
Instruments (H)
2001 Optics and Optical Instruments Environmental Requirements - Part 11:
Optical Instruments for Outdoor Conditions
of Use (H)
1996 Optics and Optical Instruments Preparation of Drawings for Optical
Elements and Systems - Part 1: General (G)
1996 Optics and Optical Instruments Preparation of Drawings for Optical
Elements and Systems - Part 2: Material
Imperfections - Stress Birefringence (G)
1996 Optics and Optical Instruments Preparation of Drawings for Optical
Elements and Systems - Part 3: Material
Imperfections - Bubbles and Inclusions (G)
1997 Optics and Optical Instruments Preparation of Drawings for Optical
Elements and Systems - Part 4: Material
Imperfections - Inhomogeneity and Striae (G)
1996 Optics and Optical Instruments Preparation of Drawings for Optical
Elements and Systems - Part 5: Surface Form
Tolerances (G)
1996 Optics and Optical Instruments -
BS ISO 10110-7
BS ISO 10110-5
BS ISO 10110-6
BS ISO 10110-9
BS ISO 10110-10
BS ISO 10110-11
BS ISO 10110-12
BS ISO 10135
BS ISO 10161-2
BS ISO TR 10193
BS ISO TR 10194
BS ISO 6221
Preparation of Drawings for Optical
Elements and Systems - Part 6: Centring
Tolerances (G)
1996 Optics and Optical Instruments Preparation of Drawings for Optical
Elements and Systems - Part 7: Surface
Imperfections Tolerances (G)
1996 Amd 1 Optics and Optical Instruments Preparation of Drawings for Optical
Elements and Systems - Part 5: Surface Form
Tolerances AMD 9488; August 1997; (G)
1996 Corr 1 Optics and Optical Instruments Preparation of Drawings for Optical
Elements and Systems - Part 6: Centring
Tolerances CORR 10580; June 2000; (G)
1996 Optics and Optical Instruments Preparation of Drawings for Optical
Elements and Systems - Part 9: Surface
Treatment and Coating (G)
1996 Optics and Optical Instruments Preparation of Drawings for Optical
Elements and Systems - Part 10: Table
Representing Data of a Lens Element (G)
1996 Optics and Optical Instruments Preparation of Drawings for Optical
Elements and Systems - Part 11: NonToleranced Data (G)
1997 Optics and Optical Instruments Preparation of Drawings for Optical
Elements and Systems - Part 12: Aspheric
Surfaces (G)
1994 Technical Drawings - Simplified
Representation of Moulded, Cast and Forged
Parts (G)
1997 Information and Documentation - Open
Systems Interconnection - Interlibrary Loan
Application Protocol Specification Part 2:
Protocol Implementation Conformance
Statement (PICS) Proforma (S)
1989 Round General Use Light Gauge Metal
Containers - Nominal Filling Volumes and
Nominal Diameters (H)
1989 Non-Round General Use Light Gauge
Metal Containers - Nominal Filling Volumes
and Nominal Cross-Sections (H)
1996 Photography - Films and Papers -
BS ISO 6224
BS ISO 6224
BS ISO 6263
BS ISO 6292
BS ISO 6336-1
BS ISO 6336-1
BS ISO 6336-3
BS ISO 6336-5
BS ISO 6356
BS ISO 6593
BS ISO 6646
BS ISO 6690
BS ISO 6502
Determination of Dimensional Change (S)
1995 Plastics Hoses, Textile-Reinforced, for
General-Purpose Water Applications Specification (E)
1995 Amd 1 Plastics Hoses, TextileReinforced, for General-Purpose Water
Applications - Specification AMD 9706;
December 15, 1997; Renumbered as BS EN
ISO 6224: 1997; (E)
1997 Hydraulic Fluid Power - Compensated
Flow-Control Valves - Mounting Surfaces
Supersedes BS 6494: Part 5: 1989; (E)
1996 Powered Industrial Trucks and Tractors
- Brake Performance and Component
Strength (E)
1996 Calculation of Load Capacity of Spur
and Helical Gears Part 1: Basic Principles,
Introduction and General Influence Factors
(G)
1996 Corr.1 Calculation of Load Capacity of
Spur and Helical Gears Part 1: Basic
Principles, Introduction and General
Influence Factors CORR 10404; May 15,
1999; ISO 6336-1: 1996; (G)
1996 Calculation of Load Capacity of Spur
and Helical Gears Part 3: Calculation of
Tooth Bending Strength (G)
1996 Calculation of Load Capacity of Spur
and Helical Gears: Part 5: Strength and
Quality of Materials (G)
2000 Textile Floor Coverings - Assessment
of Static Electrical Propensity - Walking Test
(L)
(OBSOLETE) 1990 Information Processing Program Flow for Processing Sequential
Files in Terms of Record Groups (S)
2000 Rice - Determination of the Potential
Milling Yield from Paddy and Husked Rice
(W)
1996 Milking Machine Installations Mechanical Tests Supersedes BS 5545: Part
3: 1988; (F)
1999 Physical Testing of Rubber - Part
A60.1: Curemetering - Guide to the Use of
Curemeters Also Numbered as BS 903A60.1: 2000; Supersedes BS 903-A60.1:
BS ISO 6721-10
BS ISO 6743-4
BS ISO 6787
BS ISO 6803
BS ISO 6803
BS ISO TR 6809
BS ISO 6861
BS ISO 6879
BS ISO 6916-1
BS ISO 6926
BS ISO 6953-1
BS ISO 2710-1
1996; (V)
1999 Plastics - Determination of Dynamic
Mechanical Properties - Part 10: Complex
Shear Viscosity Using a Parallel-Plate
Oscillatory Rheometer Supersedes BS 27823:Method 323G:1997; (V)
1999 Lubricants, Industrial Oils and Related
Products (Class L) - Classification - Part 4:
Family H (Hydraulic Systems) Supersedes
BS 6413-4:1982; (W)
2001 Assembly Tools for Screws and Nuts Adjustable Wrenches Supersedes BS
6333:1995; (F)
1994 Rubber or Plastics Hoses and Hose
Assemblies - Hydraulic-Pressure Impulse
Test without Flexing (E)
1994 Amd 1 Rubber or Plastics Hoses and
Hose Assemblies - Hydraulic-Pressure
Impulse Test without Flexing AMD 9707;
December 15, 1997; Renumbered as BS EN
ISO 6803: 1997; (E)
1996 Rubber Compounding Ingredients Carbon Black - Standard Reference Blacks
(V)
1997 Information and Documentation Glagolitic Alphabet Coded Character Set for
Bibliographic Information Interchange (S)
1995 Air Quality - Performance
Characteristics and Related Concepts for Air
Quality Measuring Methods (N)
1995 Flexible Cellular Polymeric Materials Sponge and Expanded Cellular Rubber
Products - Specification Part 1: Sheeting (V)
1999 Acoustics - Requirements for the
Performance and Calibration of Reference
Sound Sources for the Determination of
Sound Power Levels Supersedes BS 41968:1991; (F)
2000 Pneumatic Fluid Power - Compressed
Air Pressure Regulators and Filter-Regulators
- Part 1: Main Characteristics to be Included
in Literature from Suppliers and ProductMarking Requirements (E)
2000 Reciprocating Internal Combustion
Engines - Vocabulary - Part 1: Terms for
Engine Design and Operation (G)
BS ISO 2710-2
BS ISO 2789
BS ISO 2804
BS ISO 2837
BS ISO 2846-2
BS ISO 2846-4
BS ISO 2859-4
BS ISO 2944
BS ISO 2939
BS EN ISO 4577
BS ISO 2898-1
BS ISO 2898-2
BS ISO 2898-2
1999 Reciprocating Internal Combustion
Engines - Vocabulary - Part 2: Terms for
Engine Maintenance (G)
1991 Information and Documentation International Library Statistics Renumbered
as BS EN ISO 2789: 1995
1996 Wire, Bar or Tube Drawing Dies - AsSintered Pellets of Hardmetal (Carbide) Dimensions (H)
1996 Graphic Technology - Prints and
Printing Inks - Assessment of Resistance to
Solvents (Q)
2000 Graphic Technology - Colour and
Transparency of Ink Sets for Four-ColourPrinting - Part 2: Coldset Offset Lithographic
Printing (H)
2000 Graphic Technology - Colour and
Transparency of Printing Ink Sets for FourColour-Printing - Part 4: Screen Printing (H)
1999 Sampling Procedures for Inspection by
Attributes - Part 4: Procedures for
Assessment of Stated Quality Levels (G)
2000 Fluid Power Systems and Components Nominal Pressures (E)
1986 Cinematography - Picture Image Area
and Photographic Sound Record on 35mm
Motion- Picture Release Prints - Position and
Dimensions (H)
1999 Plastics - Polypropylene and PropyleneCopolymers - Determination of Thermal
Oxidative Stability in Air - Oven Method (V)
1996 Plastics - Plasticized Poly(Vinyl
Chloride) (PVC-P) Moulding and Extrusion
Materials Part 1: Designation System and
Basis for Specifications Renumbered as BS
EN ISO 2898-1; (V)
1997 Plastics - Plasticized Poly(Vinyl
Chloride) (PVC-P) Moulding and Extrusion
Materials Part 2: Preparation of Test
Specimens and Determination of Properties
(V)
1997 Amd 1 Plastics - Plasticized Poly(Vinyl
Chloride) (PVC-P) Moulding and Extrusion
Materials Part 2: Preparation of Test
Specimens and Determination of Properties
AMD 10727; February 2000;(V)
BS EN ISO 4589-1
BS EN ISO 4589-2
BS EN ISO 4589-3
BS EN ISO 4599
BS EN ISO 4610
BS EN ISO 4610
BS EN ISO 4611
BS EN ISO 4612
BS EN ISO 4613-1
BS EN ISO 4614
BS EN ISO 4615
BS EN ISO 176
BS EN ISO 177
2000 Plastics - Determination of Burning
Behaviour by Oxygen Index - Part 1:
Guidance Renumbers BS ISO 4589-1: 1996
1999 Plastics - Determination of Burning
Behaviour by Oxygen Index - Part 2:
Ambient-Temperature Test Renumbers BS
ISO 4589-2: 1996; Supersedes BS 2782-1:
Method 141: 1986; (V)
1996 Plastics - Determination of Burning
Behaviour by Oxygen Index Part 3: ElevatedTemperature Test Annex A of BS EN ISO
4589-3: 1996 Supersedes BS 2782: Part 1:
Methods 143A and 143B: 1989; (V)
1997 Plastics - Determination of Resistance
to Environmental Stress Cracking (ESC) Bent Strip Method Renumbers BS 2782: PT
8: METH 832A: 1991; (V)
2001 Corr 1 Plastics - Vinyl Chloride
Homopolymer and Copolymer Resins - Sieve
Analysis Using Air-Jet Sieve Apparatus
CORR 13756: March 15, 2002; (V)
2001 Plastics - Vinyl Chloride Homopolymer
and Copolymer Resins - Sieve Analysis
Using Air-Jet Sieve Apparatus (V)
2001 Plastics - Determination of the Effects
of Exposure to Damp Heat, Water Spray and
Salt Mist Renumbers BS 2782-5:METH
551A:1988; (V)
1999 Plastics - Preparation of PVC Pastes for
Test Purposes - Planetary-Mixer Method (V)
1999 Plastics - Ethylene/Vinyl Acetate
(E/VAC) Moulding and Extrusion Materials Part 1: Designation and Specification (V)
2000 Plastics - Melamine-Formaldehyde
Mouldings - Determination of Extractable
Formaldehyde Renumbers BS 2782-4:
Methods 462A and 462B: 1978; (V)
1999 Plastics - Unsaturated Polyesters and
Epoxide Resins - Determination of Total
Chlorine Content (V)
2000 Plastics - Determination of Loss of
Plasticizers - Activated Carbon Method
Renumbers BS 2782-4: Methods 456A and
456B: 1979; (V)
2000 Plastics - Determination of Migration of
Plasticizers Renumbers BS 2782-4: Method
BS EN ISO 178
BS EN ISO 179
BS EN ISO 179-1
BS EN ISO 179-2
BS EN ISO 186
BS EN ISO 179-2
BS EN ISO 182-2
BS EN ISO 266
BS EN ISO 283-1
BS EN ISO 291
BS EN ISO 295
BS EN ISO 305
465C: 1990; (V)
1997 Plastics - Determination of Flexural
Properties ISO 178: 1993; Renumbers BS
2782: PT 3: METH 335A: 1993; (V)
1997 Plastics - Determination of Charpy
Impact Strength Supersedes BS 2782: PT 3:
METH 359: 1984; Renumbers BS 2782: PT
3: METH 359: 1993; (V)
2001 Plastics - Determination of Charpy
Impact Properties - Part 1: Non-Instrumented
Impact Test (V)
1999 Plastics - Determination of Charpy
Impact Properties - Part 2: Instrumented
Impact Test Also Numbered as BS 2782-2:
Method 359B: 1999; (V)
1996 Amd 1 Paper and Board - Sampling to
Determine Average Quality (AMD 9159)
July 15, 1996 (W)
1999 Corr 1 Plastics - Determination of
Charpy Impact Properties - Part 2:
Instrumented Impact Test CORR 10777;
February 2000; Also Numbered as BS 27823: Method 359B: 1999; (V)
2000 Plastics - Determination of the
Tendency of Compounds and Products Based
on Vinyl Chloride Homopolymers and
Copolymers to Evolve Hydrogen Chloride
and any Other Acidic Products at Elevated
Temperatures - Part 2: pH Method
Renumbers BS 2782-1:Method 1
1997 Acoustics - Preferred Frequencies
Supersedes BS 3593: 1963; (F)
2000 Textile Conveyor Belts - Full Thickness
Tensile Testing - Part 1: Determination of
Tensile Strength, Elongation at Break and
Elongation at the Reference Load Supersedes
BS 490-10: Section 10.2: 1983 Which is
Withdrawn; (Q)
1997 Plastics - Standard Atmospheres for
Conditioning and Testing (V)
1999 Plastics - Compression Moulding of
Test Specimens of Thermosetting Materials
Renumbers BS 2782: Part 9: Method 902A:
1992; (V)
1999 Plastics - Determination of Thermal
Stability of Poly (Vinyl Chloride) Related
BS EN ISO 472
BS EN ISO 1890
BS EN ISO 306
BS EN ISO 376
BS EN ISO 377
BS EN ISO 389-1
BS EN ISO 389-2
BS EN ISO 389-3
BS ISO 10300-2
BS ISO 10300-3
BS ISO 10303-1
Chlorine-Containing Homopolymers and
Copolymers and Their Compounds Discoloration Method (V)
2001 Plastics - Vocabulary ISO 472:1999;
Renumbers BS ISO 472:1999; (V)
1997 Reinforcement Yarns - Determination
of Twist (V)
1997 Plastics - Thermoplastic Materials Determination of Vicat Softening
Temperature (VST) Also Known as BS 2782:
Part 1: Methods 120A, 120B, 120D and
120E: 1997; Supersedes BS 2782: Part 1:
Methods 120A, 120B, 120D and 120E: 1990;
(V)
2002 Metallic Materials - Calibration of
Force-Proving Instruments Used for the
Verification of Uniaxial Testing Machines
Supersedes BS EN 10002-3: 1995; (H)
1997 Steel and Steel Products - Location and
Preparation of Samples and Test Pieces for
Mechanical Testing (V)
2000 Acoustics - Reference Zero for the
Calibration of Audiometric Equipment - Part
1: Reference Equivalent Threshold Sound
Pressure Levels for Pure Tones and Supraaural Earphones (F)
1997 Amd 1 Acoustics - Reference Zero for
the Calibration of Audiometric Equipment Part 2: Reference Equivalent Threshold
Sound Pressure Levels for Pure Tones and
Insert Earphones AMD 9427 March 15,
1997; Renumbering BS ISO 389-2 : 1994;
(F)
1999 Acoustics - Reference Zero for the
Calibration of Audiometric Equipment - Part
3: Reference Equivalent Threshold Force
Levels for Pure Tones and Bone Vibrators
Renumbers BS ISO 389-3 : 1994; (R)
2001 Calculation of Load Capacity of Bevel
Gears - Part 2: Calculation of Surface
Durability (Pitting) (E)
2001 Calculation of Load Capacity of Bevel
Gears - Part 3: Calculation of Tooth Root
Strength (E)
1994 Industrial Automation Systems and
Integration - Product Data Representation
BS ISO 10328-1
BS ISO 10328-2
BS ISO 10303-11
BS ISO 10303-22
BS ISO 10303-41
BS ISO 10303-45
BS ISO 10303-203
BS ISO 10328-3
BS ISO 10328-4
BS ISO 10328-5
BS ISO 10328-6
BS ISO 10328-7
and Exchange Part 1: Overview and
Fundamental Principles (S)
1996 Prosthetics - Structural Testing of
Lower-Limb Prostheses Part 1: Test
Configurations (N)
1996 Prosthetics - Structural Testing of
Lower-Limb Prostheses Part 2: Test Samples
(N)
1994 Industrial Automation Systems and
Integration - Product Data Representation
and Exchange Part 11: Description Methods:
The EXPRESS Language Reference Manual
(S)
1998 Industrial Automation Systems and
Integration - Product Data Representation
and Exchange Part 22: Implementation
Methods: Standard Data Access Interface (S)
1994 Industrial Automation Systems and
Integration - Product Data Representation
and Exchange Part 41: Integrated Generic
Resources: Fundamentals of Product
Description and Support (S)
1998 Industrial Automation Systems and
Integration - Product Data Representation
and Exchange - Part 45: Integrated Generic
Resources: Materials (S)
1994 Industrial Automation Systems and
Integration - Product Data Representation
and Exchange Part 203: Application
Protocol: Configuration Controlled Design
(S)
1996 Prosthetics - Structural Testing of
Lower-Limb Prostheses Part 3: Principal
Structural Tests (N)
1996 Prosthetics - Structural Testing of
Lower-Limb Prostheses Part 4: Loading
Parameters of Principal Structural Tests (N)
1996 Prosthetics - Structural Testing of
Lower-Limb Prostheses Part 5:
Supplementary Structural Tests (N)
1996 Prosthetics - Structural Testing of
Lower-Limb Prostheses Part 6: Loading
Parameters of Supplementary Structural
Tests (N)
1996 Prosthetics - Structural Testing of
Lower-Limb Prostheses Part 7: Test
BS ISO 10328-8
BS ISO 10341
BS ISO 10343
BS ISO 10347
BS ISO 10352
BS ISO 10352
BS ISO 10356
BS ISO 10361
BS ISO 10635
BS ISO 10713
BS ISO 10368
BS ISO 10371
BS ISO 10374
BS ISO 10374
BS ISO 10405
Submission Document (N)
1996 Prosthetics - Structural Testing of
Lower-Limb Prostheses Part 8: Test Report
(N)
1997 Amd 1 Ophthalmic Instruments Refractor Heads AMD 10606; September
1999, Renumbered as BS EN ISO 10341:
1999; (N)
1997 Amd 1 Ophthalmic Instruments Ophthalmometers AMD 10608; September
1999; Renumbered as BS EN ISO 10343:
1999; (N)
1999 Worm Gears - Geometry of Worms Name Plates for Worm Gear Units, Centre
Distances, Information to Be Supplied to
Gear Manufacturer by the Purchaser (E)
1997 Fibre-Reinforced Plastics - Moulding
Compounds and Prepegs - Determination of
Mass Per Unit Area (V)
1997 Amd 1 Fibre-Reinforced Plastics Moulding Compounds and Prepegs Determination of Mass per Unit Area AMD
9684; November 15, 1997; Renumbered as
BS EN ISO 10352: 1997; (V)
1996 Cinematography - Storage and
Handling of Nitrate-Base Motion-Picture
Films (H)
2000 Textile Floor Coverings - Production of
Changes in Appearance by Means of
Vettermann Drum and Hexapod Tumbler
Testers Supersedes BS 6659-2:1986; (L)
1999 Refractory Products - Methods of Test
for Ceramic Fibre Products (F)
1992 Jewellery - Gold Alloy Coatings (V)
1992 Freight Thermal Containers - Remote
Condition Monitoring (S)
1993 Fibre Reinforced Plastics - Braided
Tapes for Composite Materials
Reinforcement - Basis for a Specification (V)
1991 Amd 1 Freight Containers - Automatic
Identification AMD 9130; July 15, 1996; (Q)
1991 Amd 2 Freight Containers - Automatic
Identification AMD 9932; April 1998;
Renumbered as BS EN ISO 10374: 1998; (Q)
2000 Petroleum and Natural Gas Industries Care and Use of Casing and Tubing (Q)
BS ISO 10414-1
BS ISO 10457
BS ISO 10458
BS ISO 10459
BS ISO 10526
BS ISO 10534-2
BS ISO 10542-1
BS ISO 3629
BS ISO 3645
BS ISO 3665
BS ISO 3672-1
BS ISO 3672-1
BS ISO 3672-2
2001 Petroleum and Natural Gas Industries Field Testing of Drilling Fluids - Part 1:
Water-Based Fluids (Q)
1991 Textile Machinery - Dyeing and
Finishing Machines - Nominal Speeds (L)
1993 Textile Machinery - Square Bars for
Winding Devices Relating to Dyeing and
Finishing Machines - Dimensions (L)
1992 Textile Machinery - Dyeing and
Finishing Machines - Designation of
Operating Ranges of Component Parts (L)
1999 CIE Standard Illuminants for
Colorimetry Supersedes BS ISO/CIE 10526:
1991; (H)
1998 Acoustics - Determination of Sound
Absorption Coefficient and Impedance in
Impedance Tubes - Part 2: Transfer-Function
Method (H)
2001 Technical Systems and Aids for
Disabled or Handicapped Persons Wheelchair Tiedown and Occupant-Restraint
Systems - Part 1: Requirements and Test
Methods for All Systems (N)
1996 Photography - Processing Chemicals Specifications for Dipotassium Disulfite
(Potassium Metabisulfite) Supersedes BS
3306: 1978; (H)
1984 Cinematography - Image Area
Produced by 8 mm Type S Motion-Picture
Camera Aperture and Maximum Projectable
Image Area - Positions and Dimensions
(Replaces BS 5550: Subsection 1.2.2: 1978)
(H)
1996 Photography - Intra-Oral Dental
Radiographic Film - Specification (H)
2000 Plastics - Unsaturated-Polyester Resins
(UP-R) - Part 1: Designation System (V)
2000 Amd 1 Plastics - Unsaturated-Polyester
Resins (UP-R) - Part 2: Designation System
AMD 13325: September 27,2001;
Renumbered as BS EN ISO 3672-1:2000;
(V)
2000 Plastics - Unsaturated-Polyester Resins
(UP-R) - Part 2: Preparation of Test
Specimens and Determination of Properties
(V)
BS ISO 3672-2
BS ISO 3673-1
BS ISO 3673-1
BS ISO 3686-1
BS ISO 3688
BS ISO 3715-2
BS ISO 3723
BS ISO 3724
BS ISO 3686-2
BS ISO 3743-1
BS ISO 3743-2
2000 Amd 1 Plastics - Unsaturated-Polyester
Resins (UP-R) - Part 2: Preparation of Test
Specimens and Determination of Properties
AMD 13326: October 5,2001; Renumbered
as BS EN ISO 3672-2:2001; (V)
1996 Plastics - Epoxy Resins Part 1:
Designation (V)
1996 Amd 1 Plastics - Epoxy Resins Part 1:
Designation AMD 10743; February 2000;
Renumbered as BS EN ISO 3673-1: 2000;
(V)
2000 Test Conditions for High Accuracy
Turret and Single Spindle Coordinate
Drilling and Boring Machines with Table of
Fixed Height with Vertical Spindle - Testing
of the Accuracy - Part 1: Single Column
Type Machines (F)
1999 Pulps - Preparation of Laboratory
Sheets for the Measurement of Diffuse Blue
Reflectance Factor (ISO Brightness) (V)
2001 Ships and Marine Technology Propulsion Plants for Ships - Part 2:
Vocabulary for Controllable-Pitch Propeller
Plants (Q)
1976 Hydraulic Fluid Power - Filter
Elements - Method for End Load Test (Q)
1976 Hydraulic Fluid Power - Filter
Elements - Verification of Flow Fatigue
Characteristics (Q)
2000 Test Conditions for High Accuracy
Turret and Single Spindle Coordinate
Drilling and Boring Machines with Table of
Fixed Height with Vertical Spindle - Testing
of the Accuracy - Part 2: Portal Type
Machines with Moving Table (F)
1994 Acoustics - Determination of Sound
Power Levels of Noise Sources - Engineering
Methods for Small, Movable Sources in
Reverberant Fields Part 1: Comparison for
Hard-Walled Test Rooms (Renumbered as
BS EN ISO 3743-1: 1995) (F)
1994 Acoustics - Deter. of Sound Power
Levels of Noise Sources Using Sound
Pressure - Engineering Methods for Small,
Movable Sources in Reverberant Fields Part
2: Methods for Special Reverberation Test
BS ISO 3744
BS ISO 3773
BS ISO 3774
BS ISO 3775
BS ISO 3793
BS ISO 3794
BS ISO 3861
BS ISO 3861
BS ISO 3869
BS ISO 3890-1
BS ISO 3890-2
Rooms Renumbered as BS EN ISO 3743-2 :
1997; Replaces
1994 Acoustics - Determination of Sound
Power Levels of Noise Sources Using Sound
Pressure - Engineering Method in an
Essentially Free Field Over a Reflecting
Plane (Renumbered as BS EN ISO 3744:
1995) (F)
1983 Cinematography - Tape Splices for
8mm Type S Motion-Picture Film for
Projector Use - Dimensions (Replaces BS
5550: Subsection 1.6.2: 1979) (H)
1988 Cinematography - 35 mm MotionPicture Film Perforated 8mm Type S (1-3-57-0) and (1-0) - Cutting and Perforating
Dimensions (Replaces BS 5550: Subsection
1.1.3: 1978) (H)
1990 Cinematography - Printed 8 mm Type S
Image Area on 16 mm Motion-Picture Film
Perforated 8 mm Type S (1-3) - Position and
Dimensions (H)
1976 Essential Oils - Estimation of Primary
and Secondary Free Alcohols Content by
Acetylation in Pyridine (W)
1976 Essential Oils (Containing Tertiary
Alcohols) - Estimation of Free Alcohols
Content by Determination of Ester Value
After Acetylation (W)
1995 Rubber Hoses for Sand and Grit
Blasting - Specification (E)
1995 Amd 1 Rubber Hoses for Sand and Grit
Blasting - Specification AMD 9705;
December 15, 1997; Reumbered as BS EN
ISO 3861: 1997; (E)
2001 Composition Cork - Expansion Joint
Fillers - Specifications, Packaging and
Marking (V)
2000 Milk and Milk Products Determination of Residues of Organchlorine
Compounds (Pesticides) - Part 1: General
Considerations and Extraction Methods (W)
2000 Milk and Milk Products Determination of Residues of Organchlorine
Compounds (Pesticides) - Part 2: Test
Methods for Crude Extract Purification and
Confirmation (W)
BS ISO 3901
BS ISO 3918
BS ISO 3968
BS ISO 4020
BS ISO 4065
BS ISO 4096
BS ISO 4097
BS ISO 4037-3
BS ISO 4064-2
BS ISO 4118
BS ISO 4161
BS ISO 4119
BS ISO 4241
2001 Information and Documentation International Standard Recording Code
(ISRC) (G)
1996 Milking Machine Installations Vocabulary Supersedes BS 5545: Part 1:
1988; (F)
2001 Hydraulic Fluid Power - Filters Evaluation of Differential Pressure Versus
Flow Characteristics Supersedes BS
6277:1982; (E)
2001 Road Vehicles - Fuel Filters for Diesel
Engines - Test Methods (E)
1996 Thermoplastics Pipes - Universal Wall
Thickness Table Partially Supersedes BS
5556:1978; (E)
1978 Essential Oils (Containing Tertiary
Alcohols) - Evaluation of Free Alcohols
Content by Determination of Ester Value
After Cold Formylation (W)
2000 Rubber, Ethylene-Propylene-Diene
(EPDM) - Evaluation Procedure Supersedes
BS 6063: 1992; (V)
1999 X and Gamma Reference Radiation for
Calibrating Dosemeters and Doserate Meters
and for Determining Their Response as a
Function of Photon Energy - Part 3:
Calibration of Area and Personal Dosemeters
and the Measurement of Their Response as a
Function
2001 Measurement of Water Flow in Closed
Conduits - Meters for Cold Potable Water
Part 2: Installation Requirements and
Selection Supersedes BS 5728-2:1980; (F)
2000 Air Cargo Equipment - Non-Certified
Lower-Deck Containers for Air Transport Specification and Testing Renumbers BS M
86:1996; (S)
1999 Hexagon Nuts with Flange - Coarse
Thread (E)
1995 Pulps - Determination of Stock
Concentration (Replaces BS 5878: 1980)
(Renumbered as BS EN ISO 4119: 1996) (H)
1987 Cinematography - Leaders and Run-Out
Trailers for 35 mm and 16 mm Release Prints
- Specifications (Replaces 5550: Subsection
5.5.2: 1978) (H)
BS ISO 4269
BS ISO 4288
BS ISO 4288
BS ISO 4384-1
BS ISO 4401
BS ISO 4660
BS ISO 4695
BS ISO 4404-1
BS ISO 4406
BS ISO 4507
BS ISO 4512
BS ISO 4524-2
BS ISO 4528
2001 Petroleum and Liquid Petroleum
Products - Tank Calibration by Liquid
Measurement - Incremental Method Using
Volumetric Meters (W)
1996 Geometric Product Specification (GPS)
- Surface Texture - Profile Method: Rules
and Procedures for the Assessment of Surface
Texture (G)
1996 Amd 1 Geometric Product Specification
(GPS) - Surface Texture - Profile Method:
Rules and Procedures for the Assessment of
Surface Texture AMD 9918; March 15,
1998; Renumbered as BS EN ISO 4288:
1998; (G)
2000 Plain Bearings - Hardness Testing of
Bearing Metals - Part 1: Compound Materials
(E)
1994 Hydraulic Fluid Power - Four-Port
Directional Control Valves - Mounting
Surfaces (E)
1999 Rubber, Raw Natural - Colour Index
Test Supersedes BS 7596: 1992; (V)
1995 Iron Ores - Determination of
Reducibility (V)
2001 Petroleum and Related Products Determination of the Corrosion Resistance of
Fire-Resistant Hydraulic Fluids - Part 1:
Water-Containing Fluids (W)
1999 Hydraulic Fluid Power - Fluids Method for Coding the Level of
Contamination by Solid Particles Supersedes
BS 5540-4:1988; (E)
2000 Sintered Ferrous Materials, Carburized
or Carbonitrided - Determination and
Verification of Case-Hardening Depth by a
Micro-Hardness Test (V)
2000 Petroleum and Liquid Petroleum
Products - Equipment for Measurement of
Liquid Levels in Storage Tanks - Manual
Methods (Q)
2000 Metallic Coatings - Test Methods for
Electrodeposited Gold and Gold Alloy
Coatings - Part 2: Mixed Flowing Gas (MFG)
Environmental Tests Supersedes BS 6670-2:
1986; (F)
2000 Vitreous and Porcelain Enamel Finishes
BS ISO 4708
BS ISO 4714
BS ISO 4715
BS ISO 4589-1
BS ISO 4589-1
BS ISO 4589-2
BS ISO 4589-2
BS ISO 4603
BS ISO 4606
BS ISO 4639-2
BS ISO 4639-3
BS ISO 4658
BS ISO 11860
BS ISO 4665
- Selection of Test Methods for Vitreous and
Porcelain Enamelled Areas of Articles (F)
2000 Composition Cork - Gasket Material Test Methods (V)
2000 Composition Cork - Specifications,
Sampling, Packaging and Marking (V)
1978 Essential Oils - Quantitative Evaluation
of Residue on Evaporation (W)
1996 Plastics - Determination of Burning
Behaviour By Oxygen Index: Part 1:
Guidance (V)
1996 Amd 1 Plastics - Determination of
Burning Behaviour By Oxygen Index - Part
1: Guidance AMD 10629; April 2000;
Renumbered as BS EN ISO 4589-1: 2000;
(V)
1996 Plastics - Determination of Burning
Behaviour by Oxygen Index Part 2: AmbientTemperature Test (V)
1996 Amd 1 Plastics - Determination of
Burning Behaviour by Oxygen Index - Part 2:
Ambient-Temperature Test AMD 10627;
October 1999; Renumbered as BS EN ISO
4589-2: 1999; Supersedes BS 2782-1:
Method 141: 1986; (V)
1993 Textile Glass - Woven Fabrics Determination of Thickness (L)
1995 Textile Glass - Woven Fabric Determination of Tensile Breaking Force and
Elongation at Break by the Strip Method
(Partially Replaces BS 3396: Part 1: 1991)
(L)
1995 Rubber Tubing and Hoses for Fuel
Circuits for Internal-Combustion Engines Specification Part 2: Oxygenated Fuels (E)
1995 Rubber Tubing and Hoses for Fuel
Circuits for Internal-Combustion Engines Specification Part 3: Oxidized Fuels (E)
1999 Acrylonitrile-Butadiene Rubber (NBR)
- Evaluation Procedure) Supersedes BS 6064:
1992; (V)
1999 Textile Floor Coverings - Jute Carpet
Backing Fabric - Specification (L)
1998 Rubber, Vulcanized and Thermoplastic
- Resistance to Weathering Supersedes BS
903-A53: 1989(1995), BS 903-A54:
BS ISO 4703
BS ISO 4709
BS ISO 4710
BS ISO 4869-2
BS ISO 4909
BS ISO 5288
BS ISO 5433
BS ISO 4909
BS ISO 5024
BS ISO 6849
BS ISO 7200
BS ISO TR 5168
BS ISO 5290
BS ISO 5416
BS ISO 5456-4
BS ISO 5426-2
1989(1995) and BS 903-A55: 1989(1995);
(V)
2001 Test Conditions for Surface Grinding
Machines with Two Columns - Machines for
Grinding Slideways - Testing of the
Accuracy Supersedes BS 4656-23:1979; (F)
Composition Cork - Gasket Material Classification System, Requirements,
Sampling, Packaging and Marking (V)
2000 Cork - Cylindrical Stoppers for
Sparkling Wines and Gasified Wines Characteristics (H)
1994 Acoustics - Hearing Protectors Part 2:
Estimation of Effective A-Weighted Sound
Pressure Levels When Hearing Protectors
Are Worn (Renumbered as BS EN ISO 48692) (F)
2000 Bank Cards - Magnetic Stripe Data
Content for Track 3 (S)
2001 Synchronous Belt Drives - Vocabulary
(G)
1999 Leather - Bovine Wet Blue Specification (L)
2000 Corr 1 Bank Cards - Magnetic Stripe
Data Content for Track 3 CORR
13708:February 27,2002; (S)
1999 Petroleum Liquids and Liquefied
Petroleum Gases - Measurement - Standard
Reference Conditions ISO 5024:1999; (W)
1996 Photography - Processing Wastes Determination of Boron (H)
1984 Technical Drawings - Title Blocks (G)
1998 Measurement of Fluid Flow Evaluation of Uncertainties Supersedes BS
5844: 1980; (H)
2001 Belt Drives - Grooved Pulleys for
Narrow V-Belts - Groove Sections 9N/J,
15N/J and 25N/J (Effective System) (F)
1997 Direct Reduced Iron - Determination of
Metallic Iron Content - Bromide-Methanol
Titrimetric Method (V)
1996 Technical Drawings - Projection
Methods - Part 4: Central Projection (G)
1996 Information and Documentation Extension of the Latin Alphabet Coded
Character Set for Bibliographic Information
BS ISO 5459
BS ISO 5466
BS ISO 5473
BS ISO 5596
BS ISO 5599-1
BS ISO 5599-2
BS ISO 5631
BS ISO 5796
BS ISO 5832-2
BS ISO 6148
BS ISO 5658-2
BS ISO 5658-4
BS ISO 5659-1
Interchange Part 2: Latin Characters Used in
Minor European Languages and Obsolete
Typography (S)
1981 Technical Drawings - Geometrical
Tolerancing - Datums and Datum-Systems
for Geometrical Tolerances This BS
Reproduces Verbatim ISO 5459:1981 and
Implements it as the UK National Standard.
Together with BS 8888 and Other
Implemented European and Inter
1996 Photography - Processed Safety
Photographic Films - Storage Practices (H)
1997 Rubber- or Plastics-Coated Fabrics Determination of Crush Resistance (V)
1999 Hydraulic Fluid Power - Gas-Loaded
Accumulators with Separator - Ranges of
Pressures and Volumes and Characteristic
Quantities (E)
2001 Pneumatic Fluid Power - Five-Port
Directional Control Valves - Part 1:
Mounting Interface Surfaces without
Electrical Connector Supersedes BS 73891:1990; (E)
2001 Pneumatic Fluid Power - Five-Port
Directional Control Valves - Part 2:
Mounting Interface Surfaces with Optional
Electrical Connector (E)
2000 Paper and Board - Determination of
Colour (C/2 Degree) - Diffuse Reflectance
Method (H)
2000 Rubber Compounding Ingredients Natural Calcium Carbonate - Test Methods
(V)
1999 Implants for Surgery - Metallic
Materials - Part 2: Unalloyed Titanium (N)
2001 Photography - Micrographic Films,
Spools and Cores - Dimensions (H)
1996 Reaction to Fire Tests - Spread of
Flame Part 2: Lateral Spread on Building
Products in Vertical Configuration (N)
2001 Reaction to Fire Tests - Spread of
Flame - Part 4: Intermediate-Scale Test of
Vertical Spread of Flame with Vertically
Oriented Specimen (N)
1996 Plastics - Smoke Generation Part 1:
Guidance on Optical- Density Testing (V)
BS ISO/TR 5659-3
BS ISO 5667-17
BS ISO 5667-18
BS ISO 5707
BS ISO 5707
BS ISO 5990
BS ISO 5991
BS ISO 6022
BS ISO 6036
BS ISO 6020-3
BS ISO 6051
BS ISO 2261
BS ISO 2346
BS ISO 2382/II
1999 Plastics - Smoke Generation - Part 3:
Determination of Optical Density by a
Dynamic Flow Method (V)
2000 Water Quality - Sampling - Part 17:
Guideance on Sampling of Suspended
Sediments (N)
2001 Water Quality - Sampling - Part 18:
Guideance on Sampling of SGroundwater at
Contaminated Sites Also Known as BS 60686.18:2001; (N)
1996 Milking Machine Installations Construction and Performance Supersedes
BS 5545: Part 2: 1988; (F)
1996 Amd 1 Milking Machine Installations Construction and Performance AMD 9717;
November 15, 1997; Supersedes BS 5545:
Part 2: 1988; (F)
1996 Photography - Processing Chemicals Specifications for Potassium Sulfite, 650 g/l
Aqueous Solution Supersedes BS 6618:
1985; (H)
1979 Essential Oils - Determination of
Residue Content from Distillation Under
Reduced Pressure (W)
1981 Hydraulic Fluid Power - Single Rod
Cylinders - Mounting Dimensions - 250 Bar
(25 000 kPa) Series Supersedes BS 6331:
Part 3: 1983; (E)
1996 Cinematography - Colour MotionPicture Prints and Slides for Television Density Specifications (H)
1994 Hydraulic Fluid Power - Mounting
Dimensions for Single Rod Cylinders, 16
MPa (160 Bar) Series Part 3: Compact Series
with Bores from 250 mm to 500 mm (E)
1992 Photography - Processed Photographic
Paper Prints - Storage Practices (H)
1994 Reciprocating Internal Combustion
Engines - Hand-Operated Control Devices Standard Direction of Motion (Q)
2001 Road Vehicles - M14 X 1,25 Compact
Spark-Plugs with Flat Seating and 19 mm
Hexagon and Their Cylinder Head Housing
(E)
1976 Information Technology - Vocabulary
2382/II: Processing Units
BS ISO 2382/3
BS ISO 2382/4
BS ISO 2382/5
BS ISO 2382/6
BS ISO 2382/8
BS ISO 2382/X
BS ISO 2382/11
BS ISO 2382/12
BS ISO 2382/13
BS ISO 2382/XIV
BS ISO 2382/15
BS ISO 2382/18
BS ISO 2382/19
BS ISO 2382/21
BS ISO 2382/22
BS ISO 2398
BS ISO 2398
BS ISO 2470
BS ISO 2475
BS ISO 2475
1987 Information Technology - Vocabulary
2382/3: Equipment Technology
1987 Information Technology - Vocabulary
2382/4: Organization of Data
1989 Information Technology - Vocabulary
2382/5: Representation of Data
1987 Information Technology - Vocabulary
2382/6: Preparation and Handling of Data
1986 Information Technology - Vocabulary
2382/8: Control, Integrity and Security
1979 Information Technology - Vocabulary
2382/X: Operating Techniques and Facilities
1987 Information Technology - Vocabulary
2382/11: Processing Units
1988 Information Technology - Vocabulary
2382/12: Peripheral Equipment
1984 Information Technology - Vocabulary
2382/13: Computer Graphics
1978 Information Technology - Vocabulary
Part 14: Reliability, Maintenance and
Availability
1985 Information Technology - Vocabulary
2382/15: Programming Languages
1987 Information Technology - Vocabulary
Part 18: Distributed Data Processing
1989 Information Technology - Vocabulary
2382/19: Analog Computing
1985 Information Technology - Vocabulary
2382/21: Interfaces Between Process
Computer Systems and Technical Processes
1986 Information Technology - Vocabulary
2382/22: Calculators
1995 Rubber Hose, Textile - Reinforced, for
Compressed Air - Specification (V)
1995 Amd 1 Rubber Hose, TextileReinforced, for Compressed Air Specification AMD 9704; December 15,
1997; Reumbered as BS EN ISO 2398: 1997;
(V)
1999 Paper, Board and Pulps - Measurement
of Diffuse Blue Reflectance Factor (ISO
Brightness) Supersedes BS 4432-2:1995; (H)
1999 Chloroprene Rubber (CR) - GeneralPurpose Types - Evaluation Procedure
Supersedes BS 5375: 1992; (V)
1999 Corr 1 Chloroprene Rubber (CR) -
BS ISO 2535
BS ISO 2559
BS IEC 61520
BS IEC TR 62157
BS ISO 2535
BS IEC 61468
BS IEC 61501
BS IEC 61504
BS IEC 61508-1
BS IEC 61508-1
BS IEC 61508-1
BS IEC 61508-2
General-Purpose Types - Evaluation
Procedure CORR 13340: September 19,
2001; Supersedes BS 5375: 1992; (V)
1997 Plastics - Unsaturated Polyester Resins
- Measurement of Gel Time at 25 Degrees C
(V)
2000 Textile Glass - Mats (Made from
Chopped or Continuous Strands) Designation and Basis for Specifications (L)
2000 Metal Thermowells for Thermometer
Sensors - Functional Dimension (H)
2001 Cylindrical Machined Carbon
Electrodes - Nominal Dimensions (E)
1997 Amd 1 Plastics - Unsaturated Polyester
Resins - Measurement of Gel Time at 25
Degrees Celsius AMD 10259; October 15,
1998; Renumbered as BS EN ISO 2535:
1998; (V)
2000 Nuclear Power Plants - In-Core
Instrumentation - Characteristics and Test
Methods of Self-Powered Neutron Detectors
(Q)
1998 Nuclear Reactor Instrumentation - Wide
Range Neutron Fluence Rate Meter - Mean
Square Voltage Method (Q)
2000 Nuclear Power Plants - Instrumentation
and Control Systems Important to Safety Plant-Wide Radiation Monitoring (Q)
1998 Functional Safety of
Electrical/Electronic/Programmable
Electronic Safety-Related Systems - Part 1:
General Requirements (S)
1998 Amd 1 Functional Safety of
Electrical/Electronic/Programmable
Electronic Safety-Related Systems - Part 1:
General Requirements AMD 13779: March
15, 2002; Renumbered as BS EN 61508-1:
2002; (S)
1998 Corr.1 Functional Safety of
Electrical/Electronic/Programmable
Electronic Safety-Related Systems - Part 1:
General Requirements CORR 10631; August
1999; (S)
2000 Amd 1 Functional Safety of
Electrical/Electronic/Programmable
Electronic Safety-Related Systems - Part 2:
BS IEC 61508-2
BS IEC 61508-3
BS IEC 61508-3
BS IEC 61508-3
BS IEC 61508-5
BS IEC 61508-5
BS IEC 61508-6
Requirements for
Electrical/Electronic/Programmable
Electronic Safety-Related Systems AMD
13780: March 15, 2002; Renumbered as BS
EN 61508-2: 20
2000 Functional Safety of
Electrical/Electronic/Programmable
Electronic Safety-Related Systems - Part 2:
Requirements for
Electrical/Electronic/Programmable
Electronic Safety-Related Systems (S)
1998 Amd 1 Functional Safety of
Electrical/Electronic/Programmable
Electronic Safety-Related Systems - Part 3:
Software Requirements AMD 13781: March
15, 2002; Renumbered as BS EN 61508-3:
2002; (S)
1998 Functional Safety of
Electrical/Electronic/Programmable
Electronic Safety-Related Systems - Part 3:
Software Requirements (S)
1998 Corr.1 Functional Safety of
Electrical/Electronic/Programmable
Electronic Safety-Related Systems - Part 3:
Software Requirements CORR 10630;
August 1999; (S)
1998 Amd 1 Functional Safety of
Electrical/Electronic/Programmable
Electronic Safety Related Systems - Part 5:
Examples of Methods for the Determination
of Safety Integrity Levels AMD 13783:
March 15, 2002; Renumbered as BS EN
61508-5: 2002; (S)
1998 Functional Safety of
Electrical/Electronic/Programmable
Electronic Safety Related Systems - Part 5:
Examples of Methods for the Determination
of Safety Integrity Levels Including
Corrigendum April 1999; (S)
2000 Amd 1 Functional Safety of
Electrical/Electronic/Programmable
Electronic Safety-Related Systems - Part 6:
Guidelines on the Application of IEC 615082 and IEC 61508-3 AMD 13784: March 15,
2002; Renumbered as BS EN 61508-6: 2002;
(S)
BS IEC 61508-7
BS EN ISO 14272
BS EN ISO 14272
BS IEC 61508-6
BS EN ISO 14372
BS EN ISO 14402
BS EN ISO 14453
BS EN ISO 14556
BS EN ISO 14579
BS EN ISO 14580
BS EN ISO 14526-1
BS EN ISO 14526-2
BS EN ISO 14526-3
BS EN ISO 14527-1
2000 Functional Safety of
Electrical/Electronic/Programmable
Electronic Safety-Related Systems - Part 7:
Overview of Techniques and Measures (S)
2001 Corr 1 Specimen Dimensions and
Procedure for Cross Tension Testing
Resistance Spot and Embossed Projection
Welds CORR 13746: March 11, 2002; (F)
2001 Specimen Dimensions and Procedure
for Cross Tension Testing Resistance Spot
and Embossed Projection Welds (F)
2000 Functional Safety of
Electrical/Electronic/Programmable
Electronic Safety-Related Systems - Part 6:
Guidelines on the Application of IEC 615082 and IEC 61508-3 (S)
2001 Welding Consumables - Determination
of Moisture Resistance of Manual Metal Arc
Welding Electrodes by Measurement of
Diffusible Hydrogen ISO 14372:2000; (F)
1999 Water Quality - Determination of
Phenol Index by Flow Analysis (FIA and
CFA) Also Numbered as BS 6068-2.68:1999
(N)
2000 Pulps- Determination of AcetoneSoluble Matter Renumbers BS ISO 14453:
1997; (V)
2000 Steel - Charpy V-Notch Pendulum
Impact Test - Instrumented Test Method (V)
2001 Hexalobular Socket Head Cap Screws
(E)
2001 Hexalobular Socket Cheese Head
Screws (E)
2000 Plastics - Phenolic Powder Moulding
Compounds (PF-PMCs) - Part 1: Designation
System and Basis for Specifications (V)
2000 Plastics - Phenolic Powder Moulding
Compounds (PF-PMCs) - Part 2: Preparation
of Test Specimens and Determination of
Properties (V)
2000 Plastics - Phenolic Powder Moulding
Compounds (PF-PMCs) - Part 3:
Requirements for Selected Moulding
Compounds (V)
2000 Plastics - Urea-Formaldehyde and
Urea/Melamine-Formaldehyde Powder
BS EN ISP 12061-6
BS EN ISP 12061-7
BS EN ISP 12061-8
BS EN ISP 12061-9
BS EN ISP 12061-10
BS ISO 6098
BS ISO 6099
BS ISO 6142
Moulding Compounds (UF- and UF/MFPMCs) - Part 1: Designation System and
Basis for Specifications (V)
1996 Amd 1 Information Technology - Open
Systems Interconnection - International
Standardized Profiles: OSI Distributed
Transaction Processing Part 6: Application
Supported Transactions - Shared Control
(ATP12) (AMD 8925) August 15, 1996 (S)
1996 Amd 1 Information Technology - Open
Systems Interconnection - International
Standardized Profiles: OSI Distributed
Transaction Processing Part 7: Provider
Supported Unchained Transactions Polarized Control (ATP21) (AMD 8926)
August 15, 1996 (S)
1996 Amd 1 Information Technology - Open
Systems Interconnection - International
Standardized Profiles: OSI Distributed
Transaction Processing Part 8: Provider
Supported Unchained Transactions - Shared
Control (ATP22) (AMD 8927) August 15,
1996 (S)
1996 Amd 1 Information Technology - Open
Systems Interconnection - International
Standardized Profiles: OSI Distributed
Transaction Processing Part 9: Provider
Supported Chained Transactions - Polarized
Control (ATP31) (AMD 8928) August 15,
1996 (S)
1996 Amd 1 Information Technology - Open
Systems Interconnection - International
Standardized Profiles: OSI Distributed
Transaction Processing Part 10: Provider
Supported Chained Transactions - Shared
Control (ATP32) AMD 8929; August 15,
1996; (S)
1984 Information Processing - Self-Loading
Cartridges for 12,7 mm (0.5 in) Wide
Magnetic Tape
2001 Fluid Power Systems and Components Cylinders - Identification Code for Mounting
Dimensions and Mounting Types (E)
2001 Gas Analysis - Preparation of
Calibration Gas Mixtures - Gravimetric
Method Supersedes BS 4559-1.1:1983; (W)
BS ISO 6143
BS EN ISP 12062-1
BS EN ISP 12062-2
BS ISO 6145-2
BS ISO 6145-5
BS ISO 6145-7
BS ISO 6145-10
BS ISO 6196-10
BS ISO 6328
BS ISO 6166
BS ISO 6194-4
BS ISO 6196PART 6
BS ISO 6196PART 7
BS ISO 7176-1
BS ISO 7176-22
2001 Gas Analysis - Comparison Methods
for Determining and Checking the
Composition of Calibration Gas Mixtures
Supersedes BS 4559-9.1:1988; (W)
1996 Information Technology - International
Standardized Profiles AMH2n - Message
Handling Systems - Interpersonal Messaging
Part 1: IPM MHS Service Support (S)
1996 Information Technology - International
Standardized Profiles AMH2n - Message
Handling Systems - Interpersonal Messaging
Part 2: AMH21 - IPM Content (S)
2001 Gas Analysis - Preparation of
Calibration Gas Mixtures Using Dynamic
Volumetric Methods - Part 2: Volumetric
Pumps (W)
2001 Gas Analysis - Preparation of
Calibration Gas Mixtures Using Dynamic
Volumetric Methods - Part 5: Capillary
Calibration Devices (W)
2001 Gas Analysis - Preparation of
Calibration Gas Mixtures Using Dynamic
Volumetric Methods - Part 7: Thermal MassFlow Controllers (W)
2002 Gas Analysis - Preparation of
Calibration Gas Mixtures Using Dynamic
Volumetric Methods - Part 10: Permeation
Method Supersedes BS 4559-7: 1981; (W)
1999 Micrographics - Vocabulary - Part 10:
Index (G)
2000 Photography - Photographic Materials Detemination of ISO Resolving Power (H)
2001 Securities and Related Financial
Instruments - International Securities
Identification Numbering System (ISIN) (S)
1999 Rotary Shaft Lip Type Seals - Part 4:
Performance Test Procedures Supersedes BS
7780-4: 1995; (F)
1992 Micrographics - Vocabulary Part 6:
Equipment (H)
1992 Micrographics - Vocabulary Part 7:
Computer Micrographics (H)
1999 Wheelchairs - Part 1: Determination of
Static Stability (N)
2000 Wheelchairs - Part 22: Set-up
Procedures (N)
BS ISO 6953-2
BS ISO 6954
BS ISO 6974-1
BS ISO 6974-2
BS ISO 6974-3
BS ISO 6981
BS ISO 7148-1
BS ISO 7148-2
BS ISO 6974-4
2000 Pneumatic Fluid Power - Compressed
Air Pressure Regulators and Filter-Regulators
- Part 2: Test Methods to Determine the Main
Characteristics to be Included in Literature
from Suppliers (E)
2000 Mechanical Vibration - Guidelines for
the Measurement, Reporting and Evaluation
of Vibration with Regard to Habitability on
Passenger and Merchant Ships Supersedes
BS 6634:1985; (Q)
2000 Natural Gas - Determination of
Composition with Defined Uncertainty by
Gas Chromatography - Part 1: Guidelines for
Tailored Analysis Together with BS ISO
6974 Parts 2-6, Supersedes BS 3156-11.1.1:
1986; (W)
2001 Natural Gas - Determination of
Composition with Defined Uncertainty by
Gas Chromatography - Part 2: MeasuringSystem Characteristics and Statistics for
Processing of Data Together with BS ISO
6974 Part 1 and Parts 3 to 6, Supersedes BS
3156-11.1.1: 1
2000 Natural Gas - Determination of
Composition with Defined Uncertainty by
Gas Chromatography - Part 3: Determination
of Hydrogen, Helium, Oxygen, Nitrogen,
Carbon Dioxide and Hydrocarbons up to C8
Using Two Packed Columns Together with
BS ISO 6974 Parts
1992 Hydraulic Fluid Power - Cylinders Rod End Plain Eyes - Mounting Dimensions
(Q)
1999 Plain Bearings - Testing of the
Tribological Behaviour of Bearing Materials
- Part 1: Testing of Bearing Metals (E)
1999 Plain Bearings - Testing of the
Tribological Behavior of Bearing Materials Part 2: Testing of Polymer-Based Bearing
Materials (E)
2000 Natural Gas - Determination of
Composition with Defined Uncertainty by
Gas Chromatography - Part 4: Determination
of Nitrogen, Carbon Dioxide and C1 to C5
and C6+ Hydrocarbons for a Laboratory and
On-Line Measuring System Using Two
BS ISO 6974-5
BS ISO 6980
BS ISO TR 7066-1
BS ISO 7176-2
BS ISO 7176-15
BS ISO 7176-16
BS ISO 7180
BS ISO 7181
BS ISO 7187
BS ISO 7215
BS ISO 7229
BS ISO 7241-2
BS ISO 7322
BS ISO 7341
BS ISO 7494
BS ISO 7278-4
Columns Together w
2000 Natural Gas - Determination of
Composition with Defined Uncertainty by
Gas Chromatography - Part 5: Determination
of Nitrogen, Carbon Dioxide and C1 to C5
and C6+ Hydrocarbons for a Laboratory and
On-Line Process Application Using Three
Columns Toget
1996 Reference Beta Radiations for
Calibrating Dosimeters and Dose-Rate
Meters and for Determining Their Response
as a Function of Beta-Radiation Energy
Supersedes BS 6689: 1986; (H)
1997 Assessment of Uncertainty in
Calibration and Use of Flow Measurement
Devices Part 1: Linear Calibration
Relationships Supersedes BS 7118: Part 1:
1990; (Q)
2001 Wheelchairs - Part 2: Determination of
Dynamic Stability of Electric Wheelchairs
(N)
1996 Wheelchairs Part 15: Requirements for
Information Disclosure, Documentation and
Labelling (N)
1997 Wheelchairs Part 16: Resistance to
Ignition of Upholstered Parts - Requirements
and Test Methods (N)
1986 Pneumatic Fluid Power - Cylinders Bore and Port Thread Sizes (E)
1991 Hydraulic Fluid Power - Cylinders Bore and Rod Area Ratios (E)
1995 Photography - Materials for DirectPositive Colour-Print Cameras Determination of ISO Speed (H)
1995 Iron Ores - Determination of Relative
Reducibility (V)
1997 Rubber- or Plastics-Coated Fabrics Measurements of Gas Permeability (V)
2000 Hydraulic Fluid Power - Quick-Action
Couplings - Part 2: Test Methods Supersedes
BS 7198-2: 1989; (E)
2000 Composition Cork - Test Methods (V)
2000 Banking - Nostro Accounts
Reconciliation (G)
1996 Dental Units (N)
1999 Liquid Hydrocarbons - Dynamic
BS ISO 7391-1
BS ISO 7391-1
BS ISO 7391-2
BS ISO/TR 7470
BS ISO 7492
BS ISO 7492
BS ISO 7551
BS ISO 7391-2
BS ISO 7485
BS ISO 8573-4
BS ISO 7494
BS ISO 7507-5
Measurement - Proving Systems for
Volumetric Meters - Part 4: Guide for
Operators of Pipe Provers ISO 7278-4:1999;
(W)
1996 Plastics - Polycarbonate (PC) Moulding
and Extrusion Materials Part 1: Designation
System and Basis for Specifications (V)
1996 Amd 1 Plastics - Polycarbonate (PC)
Moulding and Extrusion Materials Part 1:
Designation System and Basis for
Specifications AMD 10745:July 2000;
Renumbered as BS EN ISO 7391-1:2000;
(V)
1996 Plastics - Polycarbonate (PC) Moulding
and Extrusion Materials Part 2: Preparation
of Test Specimens and Determination of
Properties (V)
1988 Valve Outlets for Gas Cylinders - List
of Provisions Which Are Either Standardized
or in Use Supersedes PD 6488: 1979; (E)
1997 Dental Explorers Partly Supersedes BS
2965: 1970; (N)
1997 Amd 1 Dental Explorers AMD 10134;
September 15, 1998; Renumbered as BS EN
ISO 7492: 1998; Partly Supersedes BS 2965:
1970; (N)
1996 Dental Absorbent Points (N)
1996 Amd 1 Plastics - Polycarbonate (PC)
Moulding and Extrusion Materials - Part 2:
Preparation of Test Specimens and
Determination of Properties AMD
10746:July 2000; Renumbered as 73912:2000; (V)
2000 Methods for Analysis of Animal
Feeding Stuffs - Determination of Potassium
and Sodium Contents - Methods Using
Flame-Emission Spectrometry BS 5766-212001; (W)
2001 Compressed Air - Part 4: Test Methods
for Solid Particle Content (Q)
1996 Amd 1 Dental Units AMD 9861;
January 15, 1998; Renumbered as BS EN
ISO 7494: 1998; (N)
2000 Petroleum and Liquid Petroleum
Products - Calibration of Vertical Cylindrical
Tanks - Part 5: External Electro-Optical
BS ISO 7539-8
BS ISO 7551
BS ISO 7573
BS ISO 7859
BS ISO 7885
BS ISO 8015
BS ISO 7660
BS ISO 7738
BS ISO 7772-2
BS ISO 7772-3
BS ISO 7772-4
BS ISO TR 7775
BS ISO 7781
Distance-Ranging Method ISO 7507-5:2000;
(Q)
2000 Corrosion of Metals and Alloys - Stress
Corrosion Testing Part 8: Preparation and
Use of Specimens to Evaluate Weldments
(V)
1996 Amd 1 Dental Absorbent Points AMD
10135; September 15, 1998; Renumbered as
BS EN ISO 7551: 1998; (N)
1983 Technical Drawings - Item List This BS
Reproduces Verbatim ISO 7573:1983 and
Implements it as the Uk National Standard.
Together with BS 8888 and Other
Implemented European and International
Standards Listed in Annexes A and B of BS
8888, Supersedes
2000 Mopeds - Fuel Consumption
Measurements (E)
1996 Sterile, Single-Use Dental Injection
Needles (N)
1985 Technical Drawings - Fundamental
Tolerancing Principle (G)
1983 Essential Oils - Determination of Ester
Value of Oils Containing Difficult-toSaponify Esters (W)
2001 Assembly Tools for Screws and Nuts Combination Wrenches - Lengths of
Wrenches and Maximum Thickness of Heads
(F)
1996 Assessment of Industrial Laundry
Machinery by Its Effect on Textiles Part 2:
Extracting Machines Supersedes BS 6246:
Part 2: 1983 (L)
1996 Assessment of Industrial Laundry
Machinery by Its Effect on Textiles Part 3:
Flatwork-Ironing Machines Supersedes BS
6246: Part 3: 1985 (L)
1996 Assessment of Industrial Laundry
Machinery by Its Effect on Textiles Part 4:
Batch-Drying Tumblers Supersedes BS 6246:
Part 4: 1983; (L)
1997 Securities - Scheme for Message Types
Supersedes BS ISO 7775: 1991; (G)
Styrene-Butadiene Rubber, Raw Determination of Soap and Organic-Acid
Content Supersedes BS 7164-9:1997; (V)
BS ISO 7792-1
BS ISO 7885
BS ISO 7914
BS ISO 7918
BS ISO 7919-4
BS ISO 7919-3
BS ISO 7965-2
BS ISO 7965-2
BS ISO 7970
BS ISO 8009-1
BS ISO 128-24
BS ISO 128-25
1997 Plastics - Thermoplastic Polyester (TP)
Moulding and Extrusion Materials - Part 1:
Designation System and Basis for
Specifications (V)
1996 Amd 1 Sterile, Single-Use Dental
Injection Needles AMD 10437; April 1999;
Renumbered as BS EN ISO 7885: 1999; (N)
1994 Forestry Machinery - Portable
Chainsaws - Minimum Handle Clearance and
Sizes (F)
1995 Forestry Machinery - Portable Brush
Cutters and Grass Trimmers - Cutting
Attachment Guard Dimensions (E)
1996 Mechanical Vibration of NonReciprocating Machines - Measurements on
Rotating Shafts and Evaluation Criteria Part
4: Gas Turbine Sets (Q)
1996 Mechanical Vibration of NonReciprocating Machines - Measurements on
Rotating Shafts and Evaluation Criteria Part
3: Coupled Industrial Machines (F)
1993 Sacks - Drop Test Part 2: Sacks Made
from Thermoplastic Flexible Film
Renumbered as BS EN ISO 7965-2: 1997;
(H)
1993 Amd 1 Sacks - Drop Test Part 2: Sacks
Made from Thermoplastic Flexible Film
Renumbered as BS EN ISO 7965-2: 1997;
AMD 9393; April 15, 1997; (H)
2000 Wheat (Triticum Aestivum L.) Specification Supersedes BS 7274: 1990
(1994); (W)
1996 Reusable Rubber Contraceptive
Diaphragms Part 1: Classification, Sampling
and Requirements Together with BS ISO
8009-2 to 10, This Document Supersedes BS
4028: 1989; (N)
1999 Technical Drawings - General
Principles of Presentation - Part 24: Lines on
Mechanical Engineering Drawings This BS
Reproduces Veratim ISO 128-24:1999 and
Implements it as the UK National Standard.
Together with BS 8888 and Other
Implemented European
1999 Technical Drawings - General
Principles of Presentation - Part 25: Lines on
BS ISO 128-30
BS ISO 128-34
BS ISO 128-40
BS ISO 128-44
BS ISO 128-50
BS ISO 129
BS ISO 132
BS ISO 132
BS ISO 230-1
BS ISO 230-3
BS ISO 230-4
Shipbuilding Drawings This BS Reproduces
Verbatim ISO 128-25:1999 and Implements
it as the UK National Standard. Together
with BS 8888 and Other Implemented
European Standard
2001 Technical Drawings - General
Principles of Presentation - Part 30: Basic
Conventions for Views (G)
2001 Corr 1 Technical Drawings - General
Principles of Presentation - Part 34: Views on
Mechanical Engineering Drawings CORR
13323:September 2001; (G)
2001 Technical Drawings - General
Principles of Presentation - Part 40: Basic
Conventions for Cuts and Sections (G)
2001 Technical Drawings - General
Principles of Presentation - Part 44: Sections
on Mechanical Engineering Drawings (G)
2001 Technical Drawings - General
Principles of Presentation - Part 50: Basic
Conventions for Representing Areas on Cuts
and Sections (G)
1985 Technical Drawings - Dimensioning General Principles, Definitions, Methods of
Execution and Special Indications This BS
Reproduces Verbatim ISO 129:1985 and
Implements it as the UK Standard. Together
with BS 8888 and Other Implemented
European Inte
1999 Rubber, Vulcanized or Thermoplastic Determination of Flex Cracking and Crack
Growth (De Mattia) Also Numbered As BS
903-A10: 1999; Supersedes BS 903-A10:
1984; (V)
1999 Corr 1 Rubber, Vulcanized or
Thermoplastic - Determination of Flex
Cracking and Crack Growth (De Mattia)
CORR 13160:June 2001; Supersedes BS
903-A10:1984 and 903-A11:1985; (V)
1996 Test Code for Machine Tools: Part 1:
Geometric Accuracy of Machines Operating
Under No-Load or Finishing Conditions (F)
2001 Test Code for Machine Tools - Part 3:
Determination of Thermal Effects (F)
1996 Test Code for Machine Tools: Part 4:
Circular Tests for Numerically Controlled
BS ISO 280
BS ISO 261
BS ISO 262
BS ISO 279
BS ISO 363
BS ISO 366-4
BS ISO 368
BS ISO 389-2
BS ISO 516
BS ISO 525
BS ISO 406
BS ISO 449
BS ISO 449
Machine Tools (F)
1998 Essential Oils - Determination of
Refractive Index (W)
1998 ISO General Purpose Metric Screw
Threads - General Plan (E)
1998 ISO General Purpose Metric Screw
Threads - Selected Sizes for Screws, Bolts
and Nuts (E)
1998 Essential Oils - Determination of
Relative Density at 20 Degrees C - Reference
Method (W)
1992 Textile Machinery and Accessories Flat Steel Healds with Closed End Loops Dimensions (Supersedes BS 3182: Part 1:
1978) (L)
1992 Textile Machinery and Accessories Reeds - Part 4: Plastic Bound Metal Reeds Dimensions and Designation (L)
1991 Spinning Preparatory, Spinning and
Doubling (Twisting) Machinery - Tubes for
Ring-Spinning, Doubling and Twisting
Spindles, Taper 1 : 38 and 1 : 64 (Replaces
BS 5232: 1976) (L)
1994 Acoustics - Reference Zero for the
Calibration of Audiometric Equipment - Part
2: Reference Equivalent Threshold Sound
Pressure Levels for Pure Tones and Insert
Earphones Renumbered as BS EN ISO 389-2
: 1997; (F)
1999 Photography - Camera Shutters Timing (H)
1999 Bonded Abrasive Products - General
Requirements Supersedes BS 4481-1: 1989;
(F)
1987 Technical Drawings - Tolerancing of
Linear and Angular Dimensions This BS
Reproduces Verbatim ISO 406:1987 and
Implements it as the UK NAtional Standard.
Together with BS 8888 and Other
Implemented Eurpoean International
Standards Listed in Annexes A
1997 Ships and Marine Technology Magnetic Compasses, Binnacles and
Azimuth Reading Devices - Class A (Q)
1997 Amd 1 Ships and Marine Technology Magnetic Compasses, Binnacles and
BS ISO 536
BS ISO 603-1
BS ISO 603-2
BS ISO 603-3
BS ISO 603-4
BS ISO 603-5
BS ISO 603-6
BS ISO 603-7
BS ISO 603-11
BS ISO 603-8
BS ISO 603-9
BS ISO 603-10
BS ISO 603-12
BS ISO 603-13
Azimuth Reading Devices - Class A AMD
10716 June 2000; Renumbered as BS EN
ISO 449: 2000; (Q)
1995 Paper and Board - Determination of
Grammage Replaces BS 3432: 1980;
Renumbered as BS EN ISO 536: 1997; (H)
1999 Bonded Abrasive Products Dimensions - Part 1: Grinding Wheels for
External Cylindrical Grinding between
Centres (F)
1999 Bonded Abrasive Products Dimensions - Part 2: Grinding Wheels for
Centreless External Cylindrical Grinding (F)
1999 Bonded Abrasive Products Dimensions - Part 3: Grinding Wheels for
Internal Cylindrical Grinding (F)
1999 Bonded Abrasive Products Dimensions - Part 4: Grinding Wheels for
Surface Grinding/Peripheral Grinding (F)
1999 Bonded Abrasive Products Dimensions - Part 5: Grinding Wheels for
Surface Grinding/Face Grinding (F)
1999 Bonded Abrasive Products Dimensions - Part 6: Grinding Wheels for
Tool and Toolroom Grinding (F)
1999 Bonded Abrasive Products Dimensions - Part 7: Grinding Wheels for
Manually Guided Grinding (F)
1999 Bonded Abrasive Products Dimensions - Part 11: Hand Finishing Sticks
(F)
1999 Bonded Abrasive Products Dimensions - Part 8: Grinding Wheels for
Deburring and Fettling/Snagging (F)
1999 Bonded Abrasive Products Dimensions - Part 9: Grinding Wheels for
High Pressure Grinding (F)
1999 Bonded Abrasive Products Dimensions - Part 10: Stones for Honing and
Superfinishing (F)
1999 Bonded Abrasive Products Dimensions - Part 12: Grinding Wheels for
Deburring and Fettling on a Straight Grinder
(F)
1999 Bonded Abrasive Products Dimensions - Part 13: Grinding Wheels for
BS ISO 603-14
BS ISO 603-15
BS ISO 603-16
BS ISO 613
BS ISO 613
BS ISO 666
BS ISO 709
BS ISO 830
BS ISO 694
BS ISO 694
BS ISO 777
BS ISO 778
BS ISO 779
BS ISO 871
BS ISO 965-1
Deburring and Fettling on a Vertical Grinder
(F)
1999 Bonded Abrasive Products Dimensions - Part 14: Grinding Wheels for
Deburring and Fettling/Snagging on a Angle
Grinder (F)
1999 Bonded Abrasive Products Dimensions - Part 15: Grinding Wheels for
Cutting-Off On Stationary or Mobile CuttingOff Mchines (F)
1999 Bonded Abrasive Products Dimensions - Part 16: Grinding Wheels for
Cutting-Off On Hand-Held Power Tools (F)
2000 Ships and Marine Technology Magnetic Compasses, Binnacles and
Azimuth Reading Devices - Class B
Supersedes BS MA 2.2:1969; (Q)
2000 Amd 1 Ships and Marine Technology Magnetic Compasses, Binnacles and
Azimuth Reading Devices - Class B AMD
13480: October 5,2001; Renumbered as BS
EN ISO 613:2001; (Q)
1996 Machine Tools - Mounting of Plain
Grinding Wheels by Means of Hub Flanges
Supersedes BS 4581: Part 1: 1970; (F)
2001 Essential Oils - Determination of Ester
Value (W)
1999 Freight Containers - Vocabulary (G)
2000 Ships and Marine Technology Positioning of Magnetic Compasses in Ships
Supersedes BS MA 2-3:1969; (Q)
2000 Amd 1 Ships and Marine Technology Positioning of Magnetic Compasses in Ships
AMD 13481: October 2001; Renumbered as
BS EN ISO 694:2001; (Q)
2001 Paper, Board and Pulp - Determination
of Calcium Supersedes BS 4897-1: 1983; (H)
2001 Paper, Board and Pulp - Determination
of Copper Supersedes BS 4897-2: 1983; (H)
2001 Paper, Board and Pulps - Determination
of Iron Supersedes BS 4897-3: 1983; (H)
1996 Plastics - Determination of Ignition
Temperature Using a Hot-Air Furnace (V)
1998 ISO General Purpose Metric Screw
Threads - Tolerances - Part 1: Principles and
Basic Data (H)
BS ISO 974
BS ISO 965-2
BS ISO 965-3
BS ISO 965-4
BS ISO 965-5
BS ISO 999
BS ISO 1039
BS ISO 1043-2
BS ISO 1051
BS ISO 1085
BS ISO 1087-2
BS ISO 1043-2
BS ISO 1101
2000 Plastics - Determination of the
Brittleness Temperature by Impact (V)
1998 ISO General Purpose Metric Screw
Threads - Tolerances - Part 2: Limits of Sizes
for General Purpose External and Internal
Screw Threads - Medium Quality (H)
1998 ISO General Purpose Metric Screw
Threads - Tolerances - Part 3: Deviations for
Constructional Screw Threads (H)
1998 ISO General Purpose Metric Screw
Threads - Tolerances - Part 4: Limits of Sizes
for Hot-Dip Galvanized External Screw
Threads to Mate with Internal Screw Threads
Tapped with Tolerance Position H or G After
Galvanizing (H)
1998 ISO General Purpose Metric Screw
Threads - Tolerances - Part 5: Limits of Sizes
for Internal Screw Threads to Mate with HotDip Galvanized External Screw Threads with
Maximum Size of Tolerance Position h
Before Galvanizing (H)
1996 Information and Documentation Guidelines for the Content, Organization and
Presentation of Indexes Supersedes BS 3700:
1988; (G)
1995 Cinematography - Cores for MotionPicture and Magnetic Film Rolls Dimensions (H)
2000 Plastics - Symbols and Abbreviated
Terms - Part 2: Fillers and Reinforcing
Materials (G)
1999 Rivet Shank Diameters (E)
1999 Assembly Tools for Screws and Nuts Double-Ended Wrenches - Size Pairing (F)
2000 Terminology Work - Vocabulary - Part
2: Computer Applications (G)
2000 Amd 1 Plastics - Symbols and
Abbreviated Terms - Part 2: Fillers and
Reinforcing Materials AMD 13346:
September 27,2001; Renumbered as BS EN
ISO 1043-2:2001; (F)
1983 Technical Drawings - Geometrical
Tolerancing - Tolerancing of Form,
Orientation, Location and Run-Out Generalities, Definitions, Symbols,
Indications on Drawings This BS Reproduces
BS ISO 1110
BS ISO 1110
BS ISO 1116
BS ISO 1163-1
BS ISO 1163-1
BS ISO 1163-2
BS ISO 1202
BS ISO 1242
BS ISO 1272
BS ISO 1163-2
BS ISO 1172
Verbatim ISO 1101:1983 and Implements it
as the UK National Standar
1995 Plastics - Polyamides - Accelerated
Conditioning of Test Specimens (V)
1995 Amd 1 Plastics - Polyamides Accelerated Conditioning of Test Specimens
AMD 10263; October 15, 1998; Renumbered
as BS EN ISO 1110: 1998; (V)
1999 Micrographics - 16 mm and 35 mm
Microfilm Spools and Reels - Specifications
Supersedes BS 1371:1973 which is
Withdrawn; (H)
1995 Plastics - Unplasticized Poly(Vinyl
Chloride) (PVC-U) Moulding and Extrusion
Materials Part 1: Designation System and
Basis for Specifications (V)
1995 Amd 1 Plastics - Unplasticized
Poly(Vinyl Chloride) (PVC-U) Moulding and
Extrusion Materials - Part 1: Designation
System and Basis for Specifications AMD
10719; July 2000; Renumbered as BS EN
ISO 1163-1: 2000; (V)
1995 Plastics - Unplasticized Poly(Vinyl
Chloride) (PVC-U) Moulding and Extrusion
Materials Part 2: Preparation of Test
Specimens and Determination of Properties
Renumbered as BS EN ISO 1163-2: 2000;
(V)
1981 Essential Oils - Determination of 1,8Cineole Content (W)
1999 Essential Oils - Determination of Acid
Value (W)
2000 Essential Oils - Determination of
Content of Phenols (W)
1995 Amd 1 Plastics - Unplasticized
Poly(Vinyl Chloride) (PVC-U) Moulding and
Extrusion Materials - Part 2: Preparation of
Test Specimens and Determination of
Properties AMD 10744; February 2000;
Renumbered as BS EN ISO 1163-2: 2000;
(V)
1996 Textile-Glass-Reinforced Plastics Prepregs, Moulding Compounds and
Laminates - Determination of the TextileGlass and Mineral-Filler Content Calcination Methods (V)
BS ISO 1172
BS ISO 1173
BS ISO 1217
BS ISO 1219-2
BS ISO 1241
BS ISO 2076
BS ISO 3928
BS ISO 1268-2
BS ISO 1268-3
BS ISO 1268-3
BS ISO 1268-5
BS ISO 1268-7
BS ISO 1271
BS ISO 1279
1996 Amd 1 Textile-Glass-Reinforced
Plastics - Prepregs, Moulding Compounds
and Laminates - Determination of the
Textile-Glass and Mineral-Filler Content Calcination Methods AMD 10350; April
1999; Renumbered as BS EN ISO 1172:
1999; (V)
2001 Assembly Tools for Screws and Nuts Drive Ends for Hand and Machine-Operated
Screwdriver Bits and Connecting Parts Dimensions, Torque Testing (F)
1996 Displacement Compressors Acceptance Tests (F)
1995 Fluid Power Systems and Components Graphic Symbols and Circuit Diagrams Part
2: Circuit Diagrams (G)
1996 Essential Oils - Determination of Ester
Values, Before and After Acetylation, and
Evaluation of the Contents of Free and Total
Alcohols (W)
1999 Textiles - Man-Made Fibres - Generic
Names Supersedes BS 4815: 1990; (L)
1999 Sintered Metal Materials, Excluding
Hardmetals - Fatigue Test Pieces (V)
2001 Fibre-Reinforced Plastics - Methods of
Producing Test Plates - Part 2: Contact and
Spray-Up Moulding (V)
2000 Fibre-Reinforced Plastics - Methods of
Producing Test Plates - Part 3: Wet
Compression Moulding (V)
2000 Amd 1 Fibre-Reinforced Plastics Methods of Producing Test Plates - Part 3:
Wet Compression Moulding AMD 13342:
September 19 2001; (V)
2001 Fibre-Reinforced Plastics - Methods of
Producing Test Plates - Part 5: Filament
Winding Supersedes BS ISO 9291:1996; (V)
2001 Fibre-Reinforced Plastics - Methods of
Producing Test Plates - Part 7: Resin Transfer
Moulding (V)
1983 Essential Oils - Determination of
Carbonyl Value - Free Hydroxylamine
Method (W)
1996 Essential Oils - Determination of
Carbonyl Value - Potentiometric Methods
Using Hydroxylammonium Chloride (W)
BS ISO 1302
BS ISO 1403
BS ISO 1403
BS ISO 1431-3
BS ISO 1629
BS ISO 1434
BS ISO 1496-2
BS ISO 1496-3
BS ISO 1622-1
BS ISO 1622-1
BS ISO 1622-2
1992 Technical Drawings - Method of
Indicating Surface Texture This BS
Reproduces Verbatim ISO 1302:1992 and
Implements it as the UK National Standard.
Together with BS 8888 and Other
Implemented European International
Standards Listed in Annexes A and B
1995 Rubber Hoses, Textile- Reinforced, for
General-Purpose Water Applications Specification (V)
1995 Amd 1 Rubber Hoses, TextileReinforced, for General-Purpose Water
Applications - Specification AMD 9703;
November 15, 1997; Renumbered as BS EN
ISO 1403: 1997; (E)
2000 Rubber, Vulcanized or Thermoplastic Resistance to Ozone Cracking - Part 3:
Reference and Alternative Methods for
Determining the Ozone Concentration in
Laboratory Test Chambers Also Numbered
as BS 903: Part A45: 2000; (V)
1995 Rubbers and Latices - Nomenclature
(V)
1995 Natural Rubber in Bales - Amount of
Bale Coating - Determination (V)
1996 Series 1 Freight Containers Specification and Testing Part 2: Thermal
Containers Supersedes BS 3951: Part 2:
Section 2.2: 1989; (H)
1995 Series 1 Freight Containers Specification and Testing Part 3: Tank
Containers for Liquids, Gases and
Pressurized Dry Bulk (Replaces BS 3951:
Part 2: Section 2.3: 1992) (H)
1994 Plastics - Polystyrene (PS) Moulding
and Extrusion Materials Part 1: Designation
System and Basis for Specifications (Partially
Replaces BS 1493: 1987) (V)
1994 Amd 1 Plastics - Polystyrene (PS)
Moulding and Extrusion Materials - Part 1:
Designation System and Basis for
Specifications AMD 10645; March 2000;
Renumbered as BS EN ISO 1622-1: 2000;
(V)
1995 Plastics - Polystyrene (PS) Moulding
and Extrusion Materials Part 2: Preparation
BS ISO 4381
BS ISO 4383
BS ISO 1762
BS ISO 1766
BS ISO 1795
BS ISO 1817
BS ISO 1781
BS ISO 1785
BS ISO 1998-6
BS ISO 1998-99
BS ISO 1887
BS ISO 1888
BS ISO 1922
BS ISO 1925
BS ISO 1957
of Test Specimens and Determination of
Properties (V) Renumbered by BS EN ISO
1622-2:1999
2000 Plain Bearings - Lead and Tin Casting
Alloys for Multilayer Plain Bearings (E)
2000 Plain Bearings - Multilayer Materials
for Thin-Walled Plain Bearings (E)
2001 Paper, Board, and Pulps Determination of Residue (Ash) on Ignition
at 525 Degrees Celcius (H)
1999 Textile Floor Coverings Determination of Thickness of Pile Above
the Substrate (L)
2000 Rubber, Raw natural and Raw Synthetic
- Sampling and Further Preparative
Procedures Supersedes BS 6315:1993; (V)
1999 Rubber, Vulcanized - Determination of
the Effect of Liquids Also Numbered as BS
903: Part A16: 1999; Supersedes BS 903:
Part A16: 1987; (V)
1983 Cinematography - Projector Usage of 8
mm Type S Motion-Picture Film for Direct
Front Projection (Replaces BS 5550: Part 1:
Section 1.7: Subsection 1.7.1: 1978) (H)
1983 Cinematography - Printed 8mm, Type
S, Image Area on 16mm Motion-Picture Film
Perforated 8mm, Type S (1-4) - Position and
Dimensions (Replaces BS 5550: Part 1:
Section 1.2: Subsection 1.2.3: 1978) (H)
2000 Petroleum Industry - Terminology Part 6: Measurement (G)
2000 Petroleum Industry - Terminology Part 99: General and Index (G)
1995 Textile Glass - Determination of
Combustible-Matter Content (V)
1996 Textile Glass - Staple Fibres of
Filaments - Determination of Average
Diameter (W)
2001 Amd 1 Rigid Cellular Plastics Determination of Shear Strength AMD
13585:December 11, 2001; (V)
2001 Mechanical Vibration - Balancing Vocabulary Supersedes BS 3851:1990; (G)
2000 Machine-Made Textile Floor Coverings
- Selection and Cutting of Specimens for
Physical Tests Supersedes BS 4664:1985; (L)
BS ISO 1984-1
BS ISO 1984-2
BS ISO 1985
BS ISO 1986-1
BS ISO 2028
BS ISO 2697
BS ISO 2725-3
BS ISO 2113
BS ISO 2631-4
BS ISO 2692
BS ISO 2705
BS ISO 2709
2001 Test Conditions for Manually
Controlled Milling Machines with Table of
Fixed Height - Testing of the Accuracy - Part
1: Machines with Horizontal Spindle (F)
2001 Test Conditions for Manually
Controlled Milling Machines with Table of
Fixed Height - Testing of the Accuracy - Part
2: Machines with Vertical Spindle (F)
1998 Machine Tools - Test Conditions for
Surface Grinding Machines with Vertical
Grinding Wheel Spindle and Reciprocating
Table - Testing of the Accuracy Supersedes
BS 4656-6: 1988; (F)
2001 Test Conditions for Surface Grinding
Machines with Horizontal Grinding Wheel
Spindle and Reciprocating Table - Testing of
the Accuracy - Part 1: Machines with a Table
Length of Up to 1 600mm Supersedes BS
4656-7:1988; (F)
1999 Synthetic Rubber Latex - Preparation of
Dry Polymer Supersedes BS 6057-3.16:
1990; (V)
1999 Diesel Engines - Fuel Nozzles - Size
2001 Assembly Tools for Screws and Nuts Square Drive Sockets - Part 3: MachineOperated Sockets (
1996 Reinforcement Fibres - Woven Fabrics
- Basis for a Specification (L)
2001 Mechanical Vibration and Shock Evaluation of Human Exposure to WholeBody Vibration - Part 4: Guidelines for the
Evaluation of the Effects of Vibration and
Rotational Motion on Passenger and Crew
Comfort in Fixed-Guideway Transport
Systems (N)
1988 Technical Drawings - Geometrical
Tolerancing - Maximum Material Principle
(Including Amendment 1:1992 Least
Material Requirement) This BS Reproduces
Verbatim ISO 2692:1988 and Implements it
as the UK National Standard. Together with
BS 8888 and Other
1999 Road Vehicles - M12 X 1,25 Spark
Plugs with Flat Seating and Their Cylinder
Head Housings (E)
1996 Information and Documentation -
BS ISO 2941
BS ISO 2942
BS ISO 2953
BS ISO 2966
BS ISO 2982-1
BS ISO 3011
BS ISO 3019-1
BS ISO 3019-2
BS ISO 3022
BS ISO 3026
BS ISO 3027
Format for Information Interchange
Supersedes BS 4748: 1982; (G)
1974 Hydraulic Fluid Power - Filter
Elements - Verification of Collapse/Burst
Resistance (Q)
1994 Hydraulic Fluid Power - Filter
Elements - Verification of Fabrication
Integrity and Determination of the First
Bubble Point (Q)
1999 Mechanical Vibration - Balancing
Machines - Description and Evaluation
Supersedes BS 3852-1:1979; (F)
1988 Cinematography - 16 mm MotionPicture Film Perforated 8 mm Type S (1-3)
and (1-4) - Cutting and Perforating
Dimensions (H)
1995 Roller Bearings - Accessories Part 1:
Tapered Sleeves - Dimensions (E)
1997 Rubber- or Plastics-Coated Fabrics Determination of Resistance to Ozone
Cracking under Static Conditions (V)
2001 Hydraulic Fluid Power - Dimensions
and Identification Code for Mounting
Flanges and Shaft Ends of Displacement
Pumps and Motors - Part 1: Inch Series
Shown in Metric Units Together with BS ISO
3019-2:2001 Supersedes BS 6276:1987; (E)
2001 Hydraulic Fluid Power - Dimensions
and Identification Code for Mounting
Flanges and Shaft Ends of Displacement
Pumps and Motors - Part 2: Metric Series
Together with BS ISO 3019-1:2001
Supersedes BS 6276:1987; (E)
1988 Cinematography - 35 mm MotionPicture Film Perforated 16 mm (1-3-0) Cutting and Perforating Dimensions
(Replaces BS 5550: Part 2: Section 2.1:
Subsection 2.1.2: 1978) (H)
1992 Cinematography - Printed 8 mm Type S
Image Area on 35 mm Motion-Picture Film
Perforated 8 mm Type S, 2R-4.227 (1664) or
5R-4.234 (1667) - Position and Dimensions
(H)
1984 Cinematography - Magnetic Stripes and
Recording Head Gaps for Sound Record on
8mm Type S Motion-Picture Films - Position
BS ISO 3030
BS ISO 3031
BS ISO 3040
BS ISO 3068
BS ISO 3069
BS ISO 3085
BS ISO 3096
BS ISO 3116
BS ISO 3245
BS ISO 3547-1
BS ISO 3547-4
BS ISO 3271
BS ISO 3274
and Width Dimensions (Replaces BS 5550:
Subsection 1.4.4: 1978) (H)
1996 Rolling Bearings - Radial Needle Roller
and Cage Assemblies - Dimensions and
Tolerances (E)
2000 Rolling Bearings - Thrust Needle Roller
and Cage Assemblies, Thrust Washer Boundary Dimensions and Tolerances
Supersedes BS 5773: Part 4: 1980(E)
1990 Technical Drawings - Dimensioning
and Tolerancing - Cones This BS Reproduces
Verbatim ISO 3040:1990 and Implements it
as the UK National Standard. Together with
BS 8888 and Other Implemented European
and International Standards Listed in
Annexes A an
1982 Cinematography - Magnetic Stripes for
Sound Records on 16mm Motion-Picture
Film Perforated 8mm Type S-2R (1-4) and
(1-3) - Positions and Width Dimensions
(Replaces BS 5550: Subsection 1.4.2: 1978)
(H)
2000 End-Suction Centrifugal Pumps Dimensions of Cavities for Mechanical Seals
and for Soft Packing (Q)
1996 Iron Ores - Experimental Methods for
Checking the Precision of Sampling (V)
1996 Rolling Bearings - Needle Rollers Dimensions and Tolerances Supersedes BS
5773: Part 5: 1979 and BS 5773: Part 6:
1980; (E)
2001 Magnesium and Magnesium Alloys Wrought Magnesium Alloys Supersedes BS
3370:1970, BS 3372:1970 and BS
3373:1970; (V)
1997 Rolling Bearings - Needle Roller
Bearings, Drawn Cup without Inner Rings Boundary Dimensions and Tolerances
Supersedes BS 5773: Part 2: 1979; (E)
1999 Plain Bearings - Wrapped Bushes - Part
1: Dimensions (E)
1999 Plain Bearings - Wrapped Bushes - Part
4: Materials (E)
1995 Iron Ores - Determination of Tumble
Strength (V)
1996 Geometric Product Specifications
BS ISO 3272-5
BS ISO 3272-6
BS ISO 3274
BS ISO 3341
BS ISO 3342
BS ISO 3374
BS ISO 3384
BS ISO 3384
BS ISO 3547-2
BS ISO 3547-3
BS ISO 3548
(GPS) - Surface Texture: Profile Method Nominal Characteristics of Contact (Stylus)
Instruments (H)
1999 Microfilmimg of Technical Drawings
and Other Drawing Office Documents - Part
5: Test Procedures for Diazo Duplicating of
Microfilm Images in Aperture Cards (G)
2000 Microfilming of Technical Drawings
and Other Drawing Office Documents - Part
6: Quality Criteria and Control of Systems
for Enlargement from 35mm Microfilm (G)
1996 Amd 1 Geometric Product
Specifications (GPS) - Surface Texture:
Profile Method - Nominal Characteristics of
Contact (Stylus) Instruments AMD 9919;
March 1998; Renumbered as BS EN ISO
3274: 1998; (H)
2000 Textile Glass - Yarns - Determination
of Breaking Force and Breaking Elongation
(L)
1995 Textile Glass - Mats - Determination of
Tensile Breaking Force (V)
2000 Reinforcement Products - Mats and
Fabrics - Determination of Mass Per Unit
Area (L)
1999 Amd 1 Rubber, Vulcanized or
Thermoplastic - Determination of Stress
Relaxation in Compression at Ambient and at
Elevated Temperatures AMD 13127:June
2001; Also Known as BS 903:Part A42:1999;
Supersedes BS 903:Part A42:1992; (V)
1999 Rubber, Vulcanized or Thermoplastic Determination of Stress Relaxation in
Compression at Ambient and at Elevated
Temperatures Also Numbered as BS 903:
Part A42: 1999; Supersedes BS 903: Part
A42: 1992; (V)
1999 Plain Bearings - Wrapped Bushes - Part
2: Test Data for Outside and Inside Diameter
(E)
1999 Plain Bearings - Wrapped Bushes - Part
3: Lubrication Holes, Lubrication Grooves
and Lubrication Indentations (E)
1999 Plain Bearings - Thin-Walled Half
Bearings with or without Flange Tolerances, Design Features and Methods of
BS ISO 3616
BS ISO 3622
BS ISO 3664
BS ISO 3867
BS ISO 3626
BS EN ISO 14660-2
BS EN ISO 14673-1
BS EN ISO 14673-1
BS EN ISO 14673-2
BS EN ISO 15087-2
BS EN ISO 15087-3
BS EN ISO 14673-2
BS EN ISO 14673-3
Test (E)
2001 Textile Glass - Chopped-Strand and
Continuous-Filament Mats - Determination
of Average Thickness, Thickness under Load
and Recovery After Compression (L)
1996 Photography - Processing Chemicals Specifications for Ammonium Thiocyanate
Supersedes BS 3750: 1978; (H)
2000 Viewing Conditions for Graphic
Technology and Photography (H)
2001 Composition Cork - Expansion Joint
Fillers - Test Methods (V)
1996 Photography - Processing Chemicals Specifications for Potassium Thiocyanate
Supersedes BS 3833: 1978; (H)
2000 Geometrical Product Specifications
(GPS) - Geometrical Features - Part 2:
Extracted Median Line of a Cylinder and a
Cone, Extracted Median Surface, Local Size
of an Extracted Feature This Standard,
Together with BS 8888 and Other
Implemented European
2001 Corr 1 Milk and Milk Products Determination of Nitrate and Nitrite Contents
- Part 1: Method Using Cadmium Reduction
and Spectrometry CORR 13739: March 12,
2002; (W)
2001 Milk and Milk Products Determination of Nitrate and Nitrite Contents
- Part 1: Method Using Cadmium Reduction
and Spectrometry (W)
2001 Milk and Milk Products Determination of Nitrate and Nitrite Contents
- Part 2: Method Using Segmented Flow
Analysis (Routine Method) (W)
2000 Dental Elevators - Part 2: Warwick
James Elevators (N)
2000 Dental Elevators - Part 3: Cryer
Elevators (N)
2001 Corr 1 Milk and Milk Products Determination of Nitrate and Nitrite Contents
- Part 2: Method Using Segmented Flow
Analysis (Routine Method) CORR 13740:
March 12, 2002; (W)
2001 Corr 1 Milk and Milk Products Determination of Nitrate and Nitrite Contents
BS EN ISO 14673-3
BS EN ISO 15087-4
BS EN ISO 14723
BS EN ISO 14726-1
BS EN ISO 14729
BS EN ISO 14730
BS EN ISO 14744-1
BS EN ISO 14744-2
BS EN ISO 14744-3
BS EN ISO 14744-4
BS EN ISO 14744-5
- Part 3: Method Using Cadmium Reduction
and Flow Injection Analysis with In-Line
Dialysis (Routine Method) CORR 13741:
March 13, 2002; (W)
2001 Milk and Milk Products Determination of Nitrate and Nitrite Contents
- Part 3: Method Using Cadmium Reduction
and Flow Injection Analysis with In-Line
Dialysis (Routine Method) (W)
2000 Dental Elevators - Part 4: Coupland
Elevators (N)
2002 Petroleum and Natural Gas Industries Pipeline Transportation Systems - Subsea
Pipeline Valves ISO 14723: 2001; (Q)
2002 Ships and Marine Technology Identification Colours for the Content of
Piping Systems - Part 1: Main Colours and
Media ISO 14726-1: 1999; Renumbers BS
ISO 14726-1:1999; (Q)
2001 Ophthalmic Optics - Contact Lens Care
Products - Microbiological Requirements and
Test Methods for Products and Regimens for
Hygienic Management of Contact Lenses
Also Numbered as BS 7208-26:2001; (N)
2000 Ophthalmic Optics - Contact Lens Care
Products - Antimicrobial Preservative
Efficacy Testing and Guidance on
Determining Discard Date Also Known as
BS 7208-25: 2000; (N)
2001 Welding - Acceptance Inspection of
Electron Beam Welding Machines - Part 1:
Principles and Acceptance Conditions (F)
2001 Welding - Acceptance Inspection of
Electron Beam Welding Machines - Part 2:
Measurement of Accelerating Voltage
Characteristics (F)
2001 Welding - Acceptance Inspection of
Electron Beam Welding Machines - Part 3:
Measurement of Beam Current
Characteristics (F)
2001 Welding - Acceptance Inspection of
Electron Beam Welding Machines - Part 4:
Measurement of Welding Speed (F)
2001 Welding - Acceptance Inspection of
Electron Beam Welding Machines - Part 5:
Measurement of Run-Out Accuracy (F)
BS EN ISO 14744-6
BS EN ISO 15087-5
BS EN ISO 15087-6
BS EN ISO 15098-1
BS EN ISO 14847
BS EN ISO 14847
BS EN ISO 14889
BS EN ISO 14896
BS EN ISO 14902
BS EN ISO 14911
BS EN ISO 14919
BS EN ISO 14921
BS EN ISO 14939
BS EN ISO 15004
BS EN ISO 15029-1
2001 Welding - Acceptance Inspection of
Electron Beam Welding Machines - Part 6:
Measurement of Stability of Spot Position (F)
2000 Dental Elevators - Part 5: Bein
Elevators (N)
2000 Dental Elevators - Part 6: Flohr
Elevators (N)
2001 Dental Tweezers - Part 1: General
Requirements (N)
1999 Rotary Positive Displacement Pumps Technical Requirements (Q)
1999 Corr 1 Rotary Positive Displacement
Pumps - Technical Requirements CORR
10836; February 2000; (Q)
1997 Spectacle Lenses Part 8: Fundamental
Requirements for Uncut Finished Lenses
Also Numbered as BS 2738: Part 8: 1997;
(N)
2001 Plastics - Polyurethane Raw Materials Determination of Isocyanate Content
Supersedes BS EN ISO 9369:1997; (V)
2001 Animal Feeding Stuffs - Determination
of Trypsin Inhibitor Activity of Soya
Products ISO 14902:2001; (L)
1999 Water Quality - Determination of
Dissolved Li+, Na+, NH4+, K+, Mn+, Ca2+,
Mg2+, Sr2+, and Ba2+ Using Ion
Chromatography - Method for Water and
Waste Water (N)
2001 Thermal Spraying - Wires, Rods and
Cords for Flame and Arc Spraying Classification - Technical Supply Conditions
(F)
2001 Thermal Spraying - Procedures for the
Application of Thermally Sprayed Coatings
for Engineering Components (F)
2001 Animal Feeding Stuffs - Determination
of Carbadox Content - Method Using HighPerformance Liquid Chromatography (W)
1998 Ophthalmic Instruments - Fundamental
Requirements and Test Methods (N)
2000 Petroleum and Related Products Determination of Spray Ignition
Characteristics of Fire-Resistant Fluids - Part
1: Spray Flame Persistence - Hollow-Cone
Nozzle Method (W)
BS EN ISO 15061
BS EN ISO 15087-1
BS EN ISO 15098-3
BS EN ISP 15124-1
BS EN ISO 15136-1
BS EN ISO 15480
BS EN ISO 15481
BS EN ISO 15136-1
BS EN ISO 15138
BS EN ISO 15212-1
BS EN ISO 15225
BS EN ISO 15245-1
BS EN ISO 15245-2
BS EN ISO 15245-2
2001 Water Quality - Determination of
Dissolved Bromate - Method by Liquid
Chromatography of Ions Also Known as BS
6068-2.73:2001; (N)
2001 Corr 1 Dental Elevators - Part 1:
General Requirements CORR 13635: January
29, 2002; (N)
2000 Dental Tweezers - Part 3: College
Types (N)
1999 Information Technology - International
Standardized Profile FOD126 - Open
Document Format: Image Applications Enhanced Document Structure - Character,
Raster Graphics, and Geometric Graphics
Content Architecture - Part 1: Document
Application Profi
2001 Corr 1 Downhole Equipment for
Petroleum and Natural Gas Industries Progressing Cavity Pump Systems for
Artificial Lift - Part 1: Pumps CORR 13765:
March 12, 2002; (Q)
1999 Hexagon Washer Head Drilling Screws
with Tapping Screw Thread (E)
1999 Cross Recessed Pan Head Drilling
Screws with Tapping Screw Thread (E)
2001 Downhole Equipment for Petroleum
and Natural Gas Industries - Progressing
Cavity Pump Systems for Artificial Lift - Part
1: Pumps (Q)
2001 Petroleum and Natural Gas Industries Offshore Production Installations - Heating,
Ventilation and Air-Conditioning (Q)
1999 Oscillation-Type Density Meters - Part
1: Laboratory Instruments (H)
2000 Nomenclature - Specification for a
Nomenclature System for Medical Devices
for the Purpose of Regulatory Data Exchange
(G)
2001 Gas Cylinders - Parallel Threads for
Connection of Valves to Gas Cylinders - Part
1: Specification ISO 15245-1:2001; (H)
2001 Corr 1 Gas Cylinders - Parallel Threads
for Connection of Valves to Gas Cylinders Part 2: Gauge Inspection CORR 13766:
March 11, 2002; (H)
2001 Gas Cylinders - Parallel Threads for
BS EN ISO 15252-1
BS EN ISO 15252-2
BS EN ISO 15641
BS EN ISO 15667
BS EN ISO 15252-3
BS EN ISO 15253
BS EN ISO 15318
BS EN ISO 15318
BS EN ISO 15330
BS EN ISO/IEC 15419
BS EN ISO 15620
BS EN ISO 15667
BS EN ISO 15682
BS EN ISO 15695
Connection of Valves to Gas Cylinders - Part
2: Gauge Inspection ISO 15245-2:2001; (H)
2000 Plastics - Epoxy Powder Moulding
Compounds (EP-PMCs) - Part 1: Designation
System and Basis for Specifications (V)
2000 Plastics - Epoxy Powder Moulding
Compounds (EP-PMCs) - Part 2: Preparation
of Test Specimens and Determination of
Properties (V)
2001 Milling Cutters for High Speed
Machining - Safety Requirements (F)
2000 Acoustics - Guidelines for Noise
Control by Enclosures and Cabins (F)
2000 Plastics - Epoxy Powder Moulding
Compounds (EP-PMCs) - Part 3:
Requirements for Selected Moulding
Compounds (V)
2000 Ophthalmic Optics and Instruments Optical Devices for Low-Vision Aids (N)
2000 Pulp, Paper and Board - Determination
of 7 Specified Polychlorinated Biphenyls
(PCB) (H)
2000 Corr 1 Pulp, Paper and Board Determination of 7 Specified Polychlorinated
Biphenyls (PCB) CORR 1 10919; April
2000; Supersedes DD ENV 1798:1996; (H)
1999 Fasteners - Preloading Test for the
Detection of Hydrogen Embrittlement Parallel Bearing Surface Method (F)
2002 Information Technology - Automatic
Identification and Data Capture Techniques Bar Code Digital Imaging and Printing
Performance Testing Supersedes DD ENV
12648: 1997 and DD ENV 13066: 1998; (S)
2000 Welding - Friction Welding of metallic
Materials It Supersedes BS 6223:1990; (F)
2000 Corr 1 Acoustics - Guidelines for Noise
Control by Enclosures and Cabins CORR
13420: October 5,2001; (F)
2001 Water Quality - Determination of
Chloride by Flow Analysis (CFA and FIA)
and Photometric or Potentiometric Detection
Also Known as BS 6068-2.71:2000;
Renumbers BS ISO 15682:2000; (N)
2001 Vitreous and Porcelain Enamels Determination of Scratch Resistance of
BS EN ISO 15755
BS EN ISO 15702
BS EN ISO 15720
BS EN ISO 15721
BS EN ISO 15774
BS EN ISO 15788-1
BS EN ISO 15798
BS IEC 62198
BS ISO 230-5
BS EN ISO 16070
BS EN ISO 16284
BS EN ISO 16654
BS EN ISO 16017-1
Enamel Finishes (F)
2000 Paper and Board - Estimation of
Contraries (H)
2000 Leather - Tests for Colour Fastness Colour Fastness to Machine Washing
Together with BS EN ISO 15703: 1999,
Supersedes Method UK-LE of BS 1006:
1990; (L)
2001 Metallic Coatings - Porosity Tests Porosity in Gold or Palladium Coatings on
Metal Substrates by Gel-Bulk Electrography
(F)
2001 Metallic Coatings - Porosity Tests Porosity in Gold or Palladium Coatings by
Sulfurous Acid/Sulfur Dioxide Vapour (F)
2001 Animal and Vegetable Fats and Oils Determination of Cadmium Content by
Direct Graphite Furnace Atomic Absorption
Spectrometry Renumbers BS 684-2.50:2000;
(W)
2001 Animal and Vegetable Fats and Oils Determination of Stigmastadienes in
Vegetable Oils - Part 1: Method Using
Capillary-Column Gas Chromatography
(Reference Method) Renumbers BS 6842.49:2000; (W)
2001 Ophthalmic Implants - Ophthalmic
Viscosurgical Devices ISO 15798: 2001; (N)
2001 Project Risk Management - Application
Guidelines (G)
2000 Test Code for Machine Tools - Part 5:
Determination of the Noise Emission (F)
2002 Petroleum and Natural Gas Industries Downhole Equipment - Lock Mandrels and
Landing Nipples (Q)
2001 Ophthalmic Optics - Information
Interchange for Ophthalmic Optical
Equipment (N)
2001 Microbiology of Food and Animal
Feeding Stuffs - Horizontal Method for the
Detection of Escherichia Coli 0157 (W)
2001 Indoor, Ambient and Workplace Air Sampling and Analysis of Volatile Organic
Compounds by Sorbent Tube/Thermal
Desorption/Capillary Gas Chromatography Part 1: Pumped Sampling (H)
BS EN ISO 16654
BS EN ISO 16931
BS EN ISO/IEC 17025
BS EN ISO 17510-1
BS EN ISO 18609
BS EN ISO 81714-1
BS EN ISO 81714-1
BS EN ISO 127772
BS ISO 592
BS ISO 875
BS ISO 885
BS IEC 796 PART 1
BS IEC 796 PART 2
BS IEC 796 PART 3
2001 Corr 1 Microbiology of Food and
Animal Feeding Stuffs - Horizontal Method
for the Detection of Escherichia Coli 0157
CORR 13344:July 2001; (W)
2001 Animal and Vegetable Fats and Oils Determination of Polymerized Triglycerides
Content by High-Performance SizeExclusion Chromatography (HPSEC) ISO
16931:2001; (W)
2000 General Requirements for the
Competence of Testing and Calibration
Laboratories Supersedes BS 7501: 1989; (G)
2002 Sleep Apnoea Breathing Therapy - Part
1: Sleep Apnoea Breathing Therapy Devices
(N)
2001 Animal and Vegetable Fats and Oils Determination of Unsaponifiable Matter Method Using Hexane Extraction Supersedes
BS EN ISO 3596-2:2000; (Q)
2001 Corr 1 Design of Graphical Symbols for
Use in the Technical Documentation of
Products - Part 1: Basic Rules CORR 13389;
September 2001; (G)
1999 Design of Graphical Symbols for Use in
the Technical Documentation of Products
Part 1: Basic Rules (G)
2000 Methods of Test for Pallet Joints - Part
2: Determination of Withdrawal and Head
Pull-Through Resistance of Pallet Nails and
Staples (H)
1998 Essential Oils - Determination of
Optical Rotation (W)
1999 Essential Oils - Evaluation of
Miscibility in Ethanol (W)
2000 General Purpose Bolts and Screws Metric Series - Radii Under the Head (E)
1990 Microprocessor System Bus - 8-Bit and
16-Bit Data (MULTIBUS I) Part 1:
Functional Description with Electrical and
Timing Specifications
1990 Microprocessor System Bus - 8-Bit and
16-Bit Data (MULTIBUS I) Part 2:
Mechanical and Pin Descriptions for the
System Bus Configuration, with Edge
Connectors (Direct)
1990 Microprocessor System BUS I, 8-Bit
BS IEC 821
BS IEC 1000-2-5
BS IEC 1000-2-6
BS ISO 923
BS ISO 1041
BS IEC 1149
BS IEC 60092-201
BS IEC 60092-204
BS IEC 1000-3-6
BS IEC 1000-3-7
BS IEC 1000-5-4
BS IEC TS 60034-18-34
and 16-Bit Data Part 3: Mechanical and Pin
Descriptions for the Eurocard Configuration
with Pin and Socket (Indirect) Connectors
1991 IEC 821 VMEbus - Microprocessor
System Bus for 1 Byte to 4 Byte Data
(Renumbered as BS EN 60821)
1995 Electromagnetic Compatibility (EMC)
Part 2: Environment Section 5: Classification
of Electromagnetic Environments - Basic
EMC Publication (E)
1995 Electromagnetic Compatibility (EMC)
Part 2: Environment Section 6: Assessment
of the Emission Levels in the Power Supply
of Industrial Plants as Regards LowFrequency Conducted Disturbances (E)
2000 Coal Cleaning Equipment Performance Evaluation Supersedes BS
3620:1963; (Q)
1973 Essential Oils - Determination of
Freezing Point (W)
1995 Guide for Safe Handling and Operation
of Mobile Radio Equipment (S)
1994 Electrical Installations in Ships - Part
201: System Design - General (Q)
1987 Electrical Installations in Ships - Part
204: System Design - Electric and
Electrohydraulic Steering Gear (Q)
1996 Electromagnetic Compatibility (EMC)
Part 3: Limits Section 6: Assessment of
Emission Limits for Distorting Loads in MV
and HV Power Systems - Basic EMC
Publication (E)
1996 Electromagnetic Compatibility (EMC)
Part 3: Limits Section 7: Assessment of
Emission Limits for Fluctuating Loads in
MV and HV Power Systems - Basic EMC
Publication (E)
1996 Electromagnetic Compatibility (EMC)
Part 5: Installation and Mitigation Guidelines
Section 4: Immunity to HEMP Specifications for Protective Devices Against
HEMP Radiated Disturbance - Basic EMC
Publication (E)
2000 Rotating Electrical Machines - Part 1834: Functional Evalution of Insulation
Systems - Test Procedures for Form-Wound
BS IEC 60404-1
BS IEC 60736
BS IEC 61241-4
BS IEC 60092-302
BS IEC 60092-306
BS IEC 60092-307
BS IEC 60092-501
BS IEC 60092-502
BS IEC 60092-503
BS IEC 60092-504
BS IEC 60092-506
BS IEC 60300-3-5
BS IEC 60319
BS IEC 60489-2
Windings - Evaluation of Thermomechnical
Endurance of Insulation Systems IEC TS
60034-18-34: 2000; (E)
2000 Magnetic Materials - Part 1:
Classification (V)
1982 Testing Equipment for Electrical
Energy Meters (E)
2001 Electrical Apparatus for Use in the
Presence of Combustible Dust - Part 4: Type
of Protection
1997 Electrical Installation in Ships - Part
302: Low-Voltage Switchgear and
Controlgear Assemblies (Q)
1980 Electrical Installations in Ships - Part
306: Equipment - Luminaries and
Accessories (Q)
1980 Electrical Installations in Ships - Part
307: Equipment - Heating and Cooking
Appliances (Q)
2001 Electrical Installations in Ships - Part
501: Special Features - Propulsion Plant (Q)
1999 Electrical Installations in Ships - Part
502: Tankers - Special Features (Q)
1975 Electrical Installations in Ships - Part
503: Special Features - A.C. Supply Systems
with Voltages in the Range Above 1 kV up to
and Including 11 kV (Q)
2001 Electrical Installations in Ships - Part
504: Special Features - Control and
Instrumentation (Q)
1996 Electrical Installations in Ships - Part
506: Special Features - Ships Carrying
Specific Dangerous Goods and Materials
Hazardous Only in Bulk (Q)
2001 Dependability Management - Part 3-5:
Application Guide - Reliability Test
Conditions and Statistical Test Principles
Supersedes BS 5760-10.1:1993; (G)
1999 Presentation and Specification of
Reliablity Data for Electronic Components
(S)
1991 Methods of Measurement for Radio
Equipment Used in the Mobile Services Part 2: Transmitters Employing A3E, F3E or
G3E Emissions Supersedes BS 6160-2:1981;
(S)
BS IEC 60489-6
BS IEC 60692
BS IEC/TS 60695-8-2
BS IEC TS 60695-9-2
BS IEC 60747-2
BS IEC 60532
BS IEC 60605-4
BS IEC 60747-4-1
BS IEC 60747-4-2
BS IEC 60747-6
BS IEC 60747-7
BS IEC 60747-8
BS IEC 60747-12-3
1999 Radio Equipment Used in the Mobile
Services - Methods of Measurement - Part 6:
Data Equipment Supersedes BS 6160: Part 6:
1989; (S)
1999 Nuclear Instrumentation - Density
Gauges Utilizing Ionizing Radiation Definitions and Test Methods (Q)
2001 Fire Hazard Testing - Part 8-2: Heat
Release - Summary and Relevance of Test
Methods (E)
2001 Fire Hazard Testing - Part 9-2: Surface
Spread of Flame - Summary and Relevance
of Test Methods (E)
2000 Semiconductor Devices - Discrete
Devices and Integrated Circuits - Part 2:
Rectifier Diodes Supersedes BS 6493-1-2:
1984; (S)
1992 Radiation Protection Instrumentation Installed Dose Ratemeters, Warning
Assemblies and Monitors - X and Energy
between 50 keV and 7 MeV Supersedes BS
5566: 1978; (N)
2001 Equipment Reliability Testing - Part 4:
Statistical Procedures for Exponential
Distribution - Point Estimates, Confidence
Intervals, Prediction Intervals and Tolerance
Intervals (H)
2000 Semiconductor Devices - Discrete
Devices - Part 4-1: Microwave Diodes and
Transistors - Microwave Field Effect
Transistors - Blank Detail Specification QC
750115: 2000; (S)
2000 Semiconductor Devices - Discrete
Devices - Part 4-2: Microwave Diodes and
Transistors - Integrated-Circuit Microwave
Amplifiers - Blank Detail Specifications QC
750116: 2000; (S)
2000 Semiconductor Devices - Part 6:
Thyristors Supersedes BS 6493-1.6:1984; (S)
2000 Semiconductor Devices - Part 7:
Bipolar Transistors Supersedes BS 64931.7:1989; (S)
2000 Semiconductor Devices - Part 8: FieldEffect Transistors Supersedes BS 64931.8:1985; (S)
1998 Discrete Semiconductor Devices and
BS IEC 60747-14-1
BS IEC 60747-14-2
BS IEC 60747-14-3
BS IEC 60747-16-2
BS IEC 60748-2
BS IEC 60748-2-11
BS IEC 60748-2-12
BS IEC 60748-2-20
BS IEC 60877
BS IEC 60880
BS IEC 60943
Integrated Circuits - Part 12-3:
Optoelectronic Devices - Blank Detail
Specification for Light-Emitting Diodes
(LEDs) for Display Applications (S)
2000 Semiconductor Devices - Part 14-1:
Semiconductor Sensors - General and
Classification (S)
2000 Semiconductor Devices - Part 14-2:
Semiconductor Sensors - Hall Elements (S)
2001 Semiconductor Devices - Part 14-3:
Semiconductor Sensors - Pressure Sensors
IEC 60747-14-3:2001; (S)
2001 Semiconductor Devices - Part 16-2:
Microwave Integrated Circuits - Frequency
Prescalers Partially Supersedes BS 64931.4:1992 Which will be Withdrawn on
Publication of the Next Edition of IEC
60747-4; IEC 60747-16-2;(S)
1997 Semiconductor Devices - Integrated
Circuits Part 2: Digital Integrated Circuits
Supersedes BS 6493-2-2; (S)
1999 Semiconductor Devices - Integrated
Circuits - Part 2-11: Digital Integrated
Circuits - Blank Detail Specification for
Single Supply Integrated Circuit, Electrically
Erasable, and Programmable Read-Only
Memory (S)
2001 Semiconductor Devices - Integrated
Circuits - Part 2-12: Digital Integrated
Circuits - Blank Detail Specification for
Programmable Logic Devices (PLDs) IECQ
QC 790121:2001; (S)
2000 Semiconductor Devices - Integrated
Circuits - Part 2-20: Digital Integrated
Circuits - Family Specification - Low
Voltage Integrated Circuits (S)
1999 Procedures for Ensuring the Cleanliness
of Industrial-Process Measurement and
Control Equipment in Oxygen Service
Supersedes BS 6869: 1987; (Q)
1986 Software for Computers in the Safety
Systems of Nuclear Power Stations (S)
1998 Guidance Concerning the Permissible
Temperature Rise for Parts of Electrical
Equipment, in Particular for Terminals
Supersedes PD 6524: 1989; (E)
BS IEC 61000-2-7
BS IEC 60880-2
BS IEC 61223-2-7
BS IEC 61223-2-9
BS IEC 61223-2-10
BS IEC 61223-2-11
BS IEC 61314-1-1
BS IEC 61508-7
BS IEC 61513
BS IEC 61526
BS IEC 61584
1998 Electromagnetic Compatibility (EMC) Part 2: Environment - Section 7: Low
Frequency Magnetic Fields in Various
Environments (S)
2000 Software for Computers Important to
Safety for Nuclear Power Plants - Part 2:
Software Aspects of Defense Against
Common Cause Failures, Use of Software
Tools and of Pre-Developed Software (S)
1999 Evaluation and Routine Testing in
Medical Imaging Departments - Part 2-7:
Constancy Tests - Equipment for Intra-Oral
Dental Radiography Excluding Dental
Panoramic Equipment (N)
1999 Evaluation and Routine Testing in
Medical Imaging Departments - Part 2-9:
Constancy Tests - Equipment for Indirect
Radioscopy and Indirect Radiography (N)
2000 Evaluation and Routine Testing in
Medical Imaging Departments - Part 2-10:
Constancy Tests - X-ray Equipment for
Mammography (N)
1999 Evaluation and Routine Testing in
Medical Imaging Departments - Part 2-11:
Constancy Tests - Equipment for General
Direct Radiography (N)
1996 Fibre Optic Fan-Outs - Part 1-1: Blank
Detail Specification - Environmental
Categories 1,2,3, 5 and 99 IEC 1314-1-1:
1996; (T)
2000 Amd 1 Functional Safety of
Electrical/Electronic/Programmable
Electronic Safety-Related Systems - Part 7:
Overview of Techniques and Measures AMD
13785: March 15, 2002; Renumbered as BS
EN 61508-7: 2002; (S)
2001 Nuclear Power Plants - Instrumentation
and Control for Systems Important to Safety General Requirements for Systems (Q)
1998 Radiation Protection Instrumentation Measurement of Personal Dose Equivalents
Hp(10) and Hp(0,07) for X, Gamma and Beta
Radiations - Direct Reading Personal Dose
Equivalent and/or Dose Equivalent Rate
Dosemeters (H)
2001 Radiation Protection Instrumentation -
BS IEC 61650
BS IEC 61703
BS IEC 61713
BS IEC 61745
BS IEC TS 61813
BS IEC/TR 61838
BS IEC 61839
BS IEC 61882
BS IEC 62117
BS IEC 62118
BS ISO 5-3
BS IEC 62086-1
BS IEC 62086-2
Installed, Portable or Transportable
Assemblies - Measurement of Air Kerma
Direction and Air Kerma Rate (H)
1997 Reliability Data Analysis Techniques Procedures for Comparison of Two Constant
Failure Rates and Two Constant Failure
(Event) Intensities (H)
2001 Mathematical Expressions for
Reliability, Availability, Maintainability and
Maintenance Support Terms (G)
2000 Software Dependability Through the
Software Life-Cycle Processes - Application
Guide (S)
1998 End-Face Image Analysis Procedure for
the Calibration of Optical Fibre Geometry
Test Sets (S)
2000 Live Working - Care, Maintenance and
In-Service Testing of Aerial Devices with
Insulating Booms (H)
2001 Nuclear Power Plants - Use of
Probabilistic Safety Assessment for the
Classification of Instrumentation and Control
Functions (Q)
2000 Nuclear Power Plants - Design of
Control Rooms - Functional Analysis and
Assignment (Q)
2001 Hazard and Operability Studies
(HAZOP Studies) - Application Guide (E)
1999 Nuclear Reactor Instrumentation Pressurized Light Water Reactors (PWR) Monitoring Adequate Cooling within the
Core During Cold Shutdown (Q)
2000 Nuclear Reactor Instrumentation Pressurized Water Reactor (PWR) of VVER
Design - Monitoring Adequate Cooling
within the Core During Cold Shutdown (Q)
1995 Photography - Density Measurements Part 3: Spectral Conditions (H)
2001 Electrical Apparatus for Explosive Gas
Atmospheres - Electrical Resistance Trace
Heating - Part 1: General and Testing
Requirements IEC 62086-1:2001; (E)
2001 Electrical Apparatus for Explosive Gas
Atmospheres - Electrical Resistance Trace
Heating - Part 2: Application Guide for
Design, Installation and Maintenance IEC
BS ISO 123
BS ISO 15
BS ISO 36
BS ISO 54
BS ISO 68-1
BS ISO 68-2
BS ISO 96-1
BS ISO 96-2
BS ISO 98
BS ISO 105-A08
BS ISO 105-A08
BS ISO 105-C08
BS ISO 105-C09
62086-2:2001; (Q)
2001 Rubber Latex -Sampling Supersedes BS
6057-2:1987; (V)
1998 Rolling Bearings - Radial Bearings Boundary Dimensions, General Plan
Supersedes BS 6267: 1982; (E)
1999 Rubber, Vulcanized or Thermoplastic Determination of Adhesion to Textile Fabrics
Also Numbered as BS 903: Part A12: 1999;
Supersedes BS 903: Part A 12: 1995; (V)
1996 Cylindrical Gears for General
Engineering and for Heavy Engineering Modules (E)
1998 ISO General Purpose Screw Threads Basic Profile - Part 1: Metric Screw Threads
(H)
1998 ISO General Purpose Screw Threads Basic Profile - Part 2: Inch Screw Threads
(H)
1992 Textile Machinery and Accessories Rings and Travellers for Ring Spinning and
Ring Doubling Frames - Part 1: T-Rings and
Their Appropriate Travellers (L)
1992 Textile Machinery and Accessories Rings and Travellers for Ring Spinning and
Ring Doubling Frames - Part 2: HZCH-, HZand J-Rings and Their Appropriate Travellers
(L)
2001 Textile Machinery and Accessories Spinning Preparatory and Spinning
Machinery - Main Dimensions of Coverings
for Top Rollers (L)
2001 Textiles - Tests for Colour Fastness Part A08: Vocabulary Used in Measurement
(L)
2001 Corr 1 Textiles - Tests for Colour
Fastness - Part A08: Vocabulary Used in
Measurement CORR 13321:August 2001;
(L)
2001 Textiles - Tests for Colour Fastness Part C08: Colour Fastness to Domestic and
Commercial Laundering Using a NonPhosphate Reference Detergent Incorporating
a Low Temperature Bleach Activator (L)
2001 Textiles - Tests for Colour Fastness Part C09: Colour Fastness to Domestic and
BS ISO 105-X16
BS ISO 113
BS EN ISO 15483
BS EN ISO 15487
BS EN ISO 15487
BS EN ISO 15584
BS EN ISO 15609-2
BS EN ISO 15528
BS IEC 61000-5-1
BS IEC 61010-3-1
BS IEC 61119-4
BS ISO 10790
Commercial Laundering - Oxidative Bleach
Responce Using a Non-Phosphate Reference
Detergent Incorporating a Low Temperature
Bleach Activator (L)
2001 Textiles - Tests for Colour Fastness Part X16: Colour Fastness to Rubbing Small Areas (L)
1999 Rolling Bearings - Plummer Block
Housings - Boundary Dimensions Supersedes
BS 5646-4: 1995; (E)
1999 Cross Recessed Raised Countersunk
Head Drilling Screws with Tapping Screw
Thread (E)
2001 Corr 1 Textiles - Method for Assessing
Appearance of Apparel and Other Textile
End Products After Domestic Washing and
Drying CORR 13643: January 29, 2002; (L)
2001 Textiles - Method for Assessing
Appearance of Apparel and Other Textile
End Products After Domestic Washing and
Drying (L)
2001 Small Craft - Inboard Petrol Engines Engine-Mounted Fuel and Electrical
Components (Q)
2001 Specification and Qualification of
Welding Procedures for Metallic Materials Welding Procedure Specification - Part 2:
Gas Welding (F)
2000 Paints, Varnishes and Raw Materials
for Paints and Varnishes - Sampling
Supersedes BS 4726: 1986 and BS EN
21512: 1994 (Also Numbered BS 3900-A.1)
Which Are Withdrawn; (W)
1996 Electromagnetic Compatibility (EMC)
Part 5: Installation and Mitigation Guidelines
Section 1: General Considerations Basic
EMC Publication (E)
1997 Safety Requirements for Electrical
Equipment for Measurement, Control, and
Laboratory Use Part 3.1: Conformity
Verification Report for IEC 61010-1 (E)
1997 Digital Audio Tape (DAT) Cassette
System Part 4: Character Pack Format (S)
1999 Measurement of Fluid Flow in Closed
Conduits - Guidance to the Selection,
Installation and Use of Coriolis Meters (Mass
BS ISO 10791-2
BS ISO 11499
BS ISO 11521
BS ISO/IEC TR 12182
BS ISO 10791-6
BS ISO 10791-8
BS ISO 10791-9
BS ISO 11498
BS ISO 11499
BS ISO 11512
BS ISO 11520-2
BS ISO 11533
BS ISO TR 11552
BS ISO/IEC ISP 12068-1
Flow, Density and Volume Flow
Measurements) (E)
2001 Test Conditions for Machining Centres
- Part 2: Geometric Tests for Machines with
Vertical Spindle or Universal Heads with
Vertical Primary Rotary Axis (Vertical ZAxis) (F)
1997 Dental Cartridges for Local
Anaesthetics (N)
1996 Securities - Scheme for Interdepository
Message Types (S)
1998 Information Technology Categorization of Software (S)
1998 Test Conditions for Machining Centres
- Part 6: Accuracy of Feeds, Speeds and
Interpolations Partially Replaces BS 465630: 1992; (F)
2001 Test Conditions for Machining Centres
- Part 8: Evaluation of Contouring
Performance in the Three Coordinate Planes
(F)
2001 Test Conditions for Machining Centres
- Part 9: Evaluation of the Operating Times
of Tool Change and Pallet Change (F)
1997 Amd 1 Dental Handpieces - Dental
Low-Voltage Electric Motors AMD 10705;
January 2000; Renumbered by BS EN ISO
11498: 2000; (N)
1997 Amd 1 Dental Cartridges for Local
Anaesthetics AMD 10696; September 1999;
Renumbered as BS EN ISO 11499: 1997; (N)
1995 Machinery for Forestry - Tracked
Special Machines - Performance Criteria for
Brake Systems (E)
2001 Agricultural Grain Driers Determination of Drying Performance - Part
2: Additional Procedures and Crop-Specific
Requirements (Q)
1996 Iron Ores - Determination of Cobalt
Content - Flame Atomic Absorption
Spectrometric Method (V)
1997 Lasers and Laser-Related Equipment Laser Materials-Processing Machines Performance Specifications and Benchmarks
for Cutting of Metals (F)
1996 Amd 1 Information Technology -
BS ISO/IEC ISP 12073
BS ISO/IEC 12119
BS ISO/IEC 12207
C9
BS ISO/IEC ISP 12068-2
BS ISO/IEC ISP 12068-2
BS ISO/IEC 12087-1
BS ISO/IEC 12087-2
BS ISO/IEC 12087-3
BS ISO/IEC 12087-5
International Standardized Profile FDI 4 Directory Data Definitions - Use of the
Directory for OSI TP Part 1: FDI 41 - Basic
Naming and Addressing AMD 9718;
December 15, 1997; Renumbered as BS EN
ISP 12068-1: 1997; (S
2000 Information Technology - International
Standardized Profile FD16 Directory Data
Definitions - EDI Use of the Directory (S)
1994 Information Technology - Software
Packages - Quality Requirements and Testing
(S)
1995 Information Technology - Software
Life Cycle Processes (S)
1970 Coupling Dimensions for High Pressure
Air Charging Valves for Aircraft
1996 Information Technology - International
Standardized Profile FDI 4 - Directory Data
Definitions - Use of the Directory for OSI TP
Part 2: FDI 42 - Enhanced Naming and
Addressing (S)
1996 Amd 1 Information Technology International Standardized Profile FDI 4 Directory Data Definitions - Use of the
Directory for OSI TP Part 2: FDI 42 Enhanced Naming and Addressing AMD
9719; December 15, 1997; Renumbered as
BS EN ISP 12068-2: 1997;
1995 Information Technology - Computer
Graphics and Image Processing - Image
Processing and Interchange (IPI) - Functional
Specification Part 1: Common Architecture
for Imaging (S)
1994 Information Technology - Computer
Graphics and Image Processing - Image
Processing and Interchange (IPI) - Functional
Specification Part 2: Programmer's Imaging
Kernal System Application Program Interface
(S)
1995 Information Technology - Computer
Graphics and Image Processing - Image
Processing and Interchange (IPI) - Functional
Specification - Part 3: Image Interchange
Facility (IIF) (S)
1998 Information Technology - Computer
Graphics and Image Processing - Image
BS ISO/IEC 12088-4
C 10
C 15
C 17
BS EN ISO 12163
BS EN ISO 12866
C 18
C 20
BS EN ISO 12086-1
BS EN ISO 12086-2
BS EN ISO 12114
BS EN ISO 12115
BS EN ISO 12138
BS EN ISO 12156-1
Processing and Interchange (IPI) - Functional
Specification - Part 5: Basic Image
Interchange Format (BIIF) (S)
1995 Information Technology - Computer
Graphics and Image Processing - Image
Processing and Interchange - Application
Program Interface Language Bindings Part 4:
C (S)
1958 Amd 1 Coupling Dimensions for
Aircraft Ground Air- Conditioning
Connections
1960 Coupling Dimensions for Aircraft-ToTractor Tow Bar Connections
1973 Coupling Dimensions for Low Pressure
Air Connections for Engine Starting
2000 Dental Baseplate/Modelling Wax (N)
1999 Ophthalmic Instruments - Perimeters
(H)
(OBSOLESCENT) 1976 V-Flange Couplings
for Aircraft Piping and Ducting-Metric Series
1986 Aircraft Gaseous Oxygen
Replenishment Connection (Inch
Dimensions) (Renders C 16: 1973
Obsolescent)
2001 Plastics - Fluoropolymer Dispersions
and Moulding and Extrusion Materials - Part
1: Designation System and Basis for
Specification Renumbers BS ISO 12086-1:
1995; (V)
2001 Plastics - Fluoropolymer Dispersions
and Moulding and Extrusion Materials - Part
2: Preparation of Test Specimens and
Determination of Properties Renumbers BS
ISO 12086-2: 1995; (V)
1997 Fibre-Reinforced Plastics Thermosetting Moulding Compounds and
Prepregs - Determination of Cure
Characteristics (V)
1997 Fibre-Reinforced Plastics Thermosetting Moulding Compounds and
Prepregs - Determination of Flowability,
Maturation and Shelf Life (V)
1997 Textiles - Domestic Laundering
Procedures for Textile Fabrics Prior to
Flammability Testing (L)
2000 Diesel Fuel - Assessment of Lubricity
BS EN ISO 12179
BS EN ISO 12185
BS EN ISO 14583
BS EN ISO 12193
BS EN ISO 12205
BS EN ISO 12209-1
BS EN ISO 12209-2
BS EN ISO 12209-3
BS EN ISO 12236
BS EN ISO 14584
BS EN ISO 14585
Using the High Frequency Reciprocating Rig
(HFRR) - Part 1: Test Method (W)
2001 Geometrical Product Specifications
(GPS) - Surface Texture: Profile Method Calibration of Contact (Stylus) Instruments
(H)
1996 Methods of Test for Petroleum and Its
Products Part 365: Crude Petroleum and
Petroleum Products - Determination of
Density - Oscillating U-Tube Method (ISO
12185: 1996) (W)
2001 Hexalobular Socket Pan Head Screws
(F)
2000 Amd 1 Corr 1 Animal and Vegetable
Fats and Oils - Determination of Lead
Content - Graphite Furnace Atomic
Absorption Method AMD 10667: June 2000;
CORR 11066: September 2000; Renumbers
BS EN ISO 684.2.21: 1995; (W)
1996 Methods of Test for Petroleum and Its
Products Part 388: Petroleum Products Determination of the Oxidation Stability of
Middle-Distillate Fuels (ISO 12205: 1995)
(W)
2001 Gas Cylinders - Outlet Connections for
Gas Cylinder Valves for Compressed
Breathable Air - Part 1: Yoke Type
Connections Partially Supersedes BS 341-2:
1963; (E)
2001 Corr 1 Gas Cylinders - Outlet
Connections for Gas Cylinder Valves for
Compressed Breathable Air - Part 2:
Threaded Connections CORR 13131: March
2001; Partially Supersedes BS 341-2:1963;
(E)
2001 Gas Cylinders - Outlet Connections for
Gas Cylinder Valves for Compressed
Breathable Air - Part 3: Adaptor for 230 Bar
Valves Partially Supersedes BS 341-2: 1963;
(E)
1996 Geotextiles and Geotextile-Related
Products - Static Puncture Test (CBR-Test)
(L)
2001 Hexalobular Socket Raised
Countersunk Head Screws (F)
2001 Hexalobular Socket Pan Head Tapping
BS EN ISO 12543-4
BS EN ISO 12543-5
BS EN ISO 12567-1
BS EN ISO 12570
BS EN ISO 12571
BS EN ISO 12572
BS EN ISO 15098-2
BS EN ISO 12777-1
BS EN ISO 12894
BS EN ISO 13230
BS EN ISO 13294
BS EN ISO 12945-2
BS EN ISO 13212
BS EN ISO 12944-5
Screws (F)
1998 Glass in Building - Laminated Glass
and Laminated Safety Glass - Part 4: Test
Methods for Durability (W)
1998 Glass in Building - Laminated Glass
and Laminated Safety Glass - Part 5:
Dimensions and Edge Finishing (W)
2000 Thermal Performance of Windows and
Doors - Determination of Thermal
Transmittance by Hot Box Method - Part 1:
Complete Windows and Doors (R)
2000 Hygrothermal Performance of Building
Materials and Products - Determination of
Moisture Content by Drying at Elevated
Temperature (R)
2000 Hygrothermal Performance of Building
Materials and Products - Determination of
Hygroscopic Sorption Properties (R)
2001 Hygrothermal Performance of Building
Materials and Products - Determination of
Water Vapour Transmission Properties (R)
2000 Dental Tweezers - Part 2: Meriam
Types (N)
1997 AMD 1 Methods of Test for Pallet
Joints Part 1: Determination of Bending
Resistance of Pallet Nails, Other Dowel-Type
Fasteners and Staples Renumbering BS ISO
12777-1: 1994; AMD 9398 March 15, 1997;
(H)
2001 Ergonomics of the Thermal
Environment - Medical Supervision of
Individuals Exposed to Extreme Hot or Cold
Environments (N)
1999 Ophthalmic Optics - Bar Code
Specifications (N)
1997 Dental Handpieces - Dental Air-Motors
(N)
2000 Textiles - Determination of Fabric
Propensity to Surface Fuzzing and to Pilling Part 2: Modified Martindale Method (L)
1999 Ophthalmic Optics - Contact Lens Care
Products - Guidelines for the Determination
of Shelf-Life Also Numbered as BS 720820:1999; (N)
1998 Paints and Varnishes - Corrosion
Protection of Steel Structures by Protective
BS EN ISO 12945-1
BS EN ISO 12947-1
BS EN ISO 12947-2
BS EN ISO 12947-3
BS EN ISO 12947-4
BS EN ISO 13295
BS EN ISO 13340
BS EN ISO 13943
BS EN ISO 14419
BS EN ISO 13366-1
BS EN ISO 13366-2
BS EN ISO 13366-3
Paint Systems - Part 5: Protective Paint
Systems Together with the Other Seven Parts
of BS EN ISO 12944, it Partially Supersedes
BS 5493: 1977; (W)
2001 Corr 1 Textiles - Determination of
Fabric Propensity to Surface Fuzzing and to
Pilling - Part 1: Pilling Box Method CORR
13120:April 2001; Supersedes BS
5811:1986; (L)
1999 Textiles - Determination of the
Abrasion Resistance of Fabrics by the
Martindale Method - Part 1: Martindale
Abrasion Testing Apparatus The Four Parts
of BS EN ISO 12947 Supersede BS 5690:
1991; (L)
1999 Textiles - Determination of the
Abrasion Resistance of Fabrics by the
Martindale Method - Part 2: Determination of
Specimen Breakdown The Four Parts of BS
EN ISO 12947 Supersede BS 5690: 1991; (L)
1999 Textiles - Determination of the
Abrasion Resistance of Fabrics by the
Martindale Method - Part 3: Determination of
Mass Loss The Four Parts of BS EN ISO
12947 Supersede BS 5690: 1991; (L)
1999 Textiles - Determination of the
Abrasion Resistance of Fabrics by the
Martindale Method - Part 4: Assessment of
Appearance Change The Four Parts of BS
EN ISO 12947 Supersede BS 5690: 1991; (L)
1997 Dental Rotary Instruments - Mandrels
Also Numbered as BS ISO 13295: 1994; (N)
2001 Transportable Gas Cylinders - Cylinder
Valves for Non-Refillable Cylinders Specification and Prototype Testing Partially
Supersedes BS 341-1: 1991; (E)
2000 Fire Safety - Vocabulary (G)
1999 Textiles - Oil Repellency Hydrocarbon Resistance Test (L)
1997 Milk - Enumeration of Somatic Cells
Part 1: Microscopic Method (W)
1997 Milk - Enumeration of Somatic Cells
Part 2: Method Using an Electronic Particle
Counter (W)
1997 Milk - Enumeration of Somatic Cells
Part 3: Fluoro-Opto-Electronic Method (W)
BS EN ISO 13397-1
BS EN ISO 13397-2
BS EN ISO 13397-3
BS EN ISO 13406-2
BS EN ISO 13468-1
BS EN ISO 13478
BS EN ISO 13500
BS EN ISO 13533
BS EN ISO 13479
BS EN ISO 13534
BS EN ISO 13535
BS EN ISO 13565-3
BS EN ISO 13628-1
1996 Periodontal Curettes, Dental Scalers
and Excavators Part 1: General Requirements
(N)
1997 Periodontal Curettes, Dental Scalers
and Excavators Part 2: Periodontal Curettes Gr-Type (N)
1997 Periodontal Curettes, Dental Scalers
and Excavators Part 3: Dental Scalers - HType (N)
2002 Ergonomic Requirements for Work
with Visual Displays Based on Flat Panels Part 2: Ergonomic Requirements for Flat
Panel Displays ISO 13406-2: 2001; (L)
1997 Plastics - Determination of the Total
Luminous Transmittance of Transparent
Materials Part 1: Single-Beam Instrument
Also Numbered as BS 2782: Part 5: Method
532A: 1997; (V)
1997 Thermoplastics Pipes for the
Conveyance of Fluids - Determination of
Resistance to Rapid Crack Propagation
(RCP) - Full-Scale Test (N)
1999 Petroleum and Natural Gas Industries Drilling Fluid Materials - Specifications and
Tests (W)
2002 Petroleum and Natural Gas Industries Drilling and Production Equipment - DrillThrough Equipment ISO 13533: 2001; (Q)
1997 Polyolefin Pipes for the Conveyance of
Fluids - Determination of Resistance to
Crack Propagation - Test Method for Slow
Crack Growth on Notched Pipes (Notch Test)
(V)
2001 Petroleum and Natural Gas Industries Drilling and Production Equipment Inspection, Maintenance, Repair and ReManufacture of Hoisting Equipment (Q)
2001 Petroleum and Natural Gas Industries Drilling and Production Equipment Hoisting Equipment (Q)
2000 Geometrical Product Specifications
(GPS) - Surface Texture: Profile Method;
Surfaces Having Stratified Functional
Properties - Part 3: Height Characterization
Using the Material Probability Curve (H)
1999 Petroleum and Natural Gas Industries -
BS EN ISO 13628-2
BS EN ISO 13628-3
BS EN ISO 13628-4
BS EN ISO 13680
BS EN ISO 13694
BS EN ISO 13702
BS EN ISO 13703
BS EN ISO 13706
BS EN ISO 13716
BS EN ISO 13731
BS EN ISO 13734
BS EN ISO 13757
Design and Operation of Subsea Production
Systems - Part 1: General Requirements and
Recommendations (G)
2001 Petroleum and Natural Gas Industries Design and Operation of Subsea Production
Systems - Part 2: Flexible Pipe Systems for
Subsea and Marine Applications (G)
2001 Petroleum and Natural Gas Industries Design and Operation of Subsea Production
Systems - Part 3: Through Flowline (FTL)
Systems (G)
1999 Petroleum and Natural Gas Industries Design and Operation of Subsea Production
Systems - Part 4: Subsea Wellhead and Tree
Equipment (G)
2002 Petroleum and Natural Gas Industries Corrosion-Resistant Alloy Seamless Tubes
for Use as Casing, Tubing and Coupling
Stock - Technical Delivery Conditions (Q)
2001 Optics and Optical Instruments - Lasers
and Laser-Related Equipment - Test Methods
for Laser Beam Bower (Energy) Density
Distribution (H)
1999 Petroleum and Natural Gas Industries Control and Mitigation of Fires and
Explosions on Offshore Production
Installations - Requirements and Guidelines
(Q)
2001 Petroleum and Natural Gas Industries Design and Installation of Piping Systems on
Offshore Production Platforms (Q)
2000 Corr 1 Petroleum and Natural Gas
Industries - Air Cooled Heat Exchangers
CORR 12058: November 2000; (Q)
2000 Dentistry - Reversible-Irreversible
Hydrocolloid Impression Material Systems
(N)
2002 Ergonomics of the Thermal
Environment - Vocabulary and Symbols ISO
13731: 2001; (G)
2001 Natural Gas - Organic Sulfur
Compounds Used as Odorants Requirements and Test Methods Renumbers
BS ISO 13734:1998; (W)
1996 Methods of Test for Petroleum and Its
Products Part 427: Liquefied Petroleum
BS EN ISO 13760
BS EN ISO 13786
BS EN ISO 13789
BS EN ISO 13793
BS EN ISO 13788
BS EN ISO 13788
BS EN ISO/IEC 13818-1
BS EN ISO/IEC 13818-3
BS EN ISO/IEC 13818-9
BS EN ISO 13844
Gases - Determination of Oily Residues High Temperature Method (ISO 13757:
1996) (W)
2000 Plastics Pipes for the Conveyance of
Fluids Under Pressure - Miner's Rule Calculation Method for Cumulative Damage
(V)
1999 Thermal Performance of Building
Components - Dynamic Thermal
Characteristics - Calculation Methods (R)
1999 Thermal Performance of Buildings Transmission Heat Loss Coefficient Calculation Method (R)
2001 Thermal Performance of Buildings Thermal Design of Foundations to Avoid
Frost Heave (R)
2002 Corr 1 Hygrothermal Performance of
Building Components and Building Elements
- Internal Surface Temperature to Avoid
Critical Surface Humidity and Interstitial
Condensation - Calculation Methods CORR
13792: March 18, 2002; (R)
2002 Hygrothermal Performance of Building
Components and Building Elements Internal Surface Temperature to Avoid
Critical Surface Humidity and Interstitial
Condensation - Calculation Methods (R)
1997 Amd 1 Information Technology Generic Coding of Moving Pictures and
Associated Audio Information Part 1:
Systems Renumbers BS ISO/IEC 13818: Part
1: 1996; AMD 9625; September 1997; (S)
1996 Amd 1 Information Technology Generic Coding of Moving Pictures and
Associated Audio Information Part 3: Audio
AMD 9285; December 15, 1996; (S)
2001 Information Technology - Generic
Coding of Moving Pictures an Associated
Audio Information - Part 9: Extension for
Real Time Interface for Systems Decoders
(ISO/IEC 13818-9:1996) (S)
2000 Plastics Piping Systems - ElastomericSealing-Ring-Type Socket Joints of
Unplasticized Poly (Vinyl Chloride)(PVC-U)
for Use with PVC-U Pipes - Test Method for
Leaktightness under Negative Pressure Also
BS EN ISO 13845
BS EN ISO 13846
BS EN ISO 13916
BS EN ISO 13919-1
BS EN ISO 13919-2
BS EN ISO 13919-2
BS EN ISO 13920
BS EN ISO 13934-1
BS EN ISO 14111
BS EN ISO 14113
Known as BS 2782-11: Method 1123D:2000;
(V)
2000 Plastics Piping Systems - ElastomericSealing-Ring-Type Socket Joints for Use
with Unplasticized Poly (Vinyl
Chloride)(PVC-U) Pipes - Test Method for
Leaktightness under Internal Pressure and
with Angular Deflection Also Known as BS
2782-11: Method 1
2001 Plastics Piping Systems - End-LoadBearing and Non-End-Load Bearing
Assemblies and Joints for Thermoplastics
Pressure Piping - Test Method for LongTerm Leaktightness Under Internal Water
Pressure Also Numbered as BS 278211:Method 1111F:2001; (V)
1997 Welding - Guidance on the
Measurement of Preheating Temperature,
Interpass Temperature and Preheat
Maintenance Temperature (F)
1997 Welding - Electron and Laser Beam
Welded Joints - Guidance on quality Levels
for Imperfections Part 1: Steel (F)
2001 Welding - Electron and Laser Beam
Welding Joints - Guidance on Quality Levels
for Imperfections - Part 2: Aluminium and its
Weldable Alloys (F)
2001 Corr 1 Welding - Electron and Laser
Beam Welded Joints - Guidance on Quality
Levels for Imperfections - Part 2: Aluminium
and its Weldable Alloys CORR
13516:October 11,2001; (F)
1997 Welding - General Tolerances for
Welded Constructions - Dimensions for
Lengths and Angles - Shape and Position (F)
1999 Textiles - Tensile Properties of Fabrics
- Part 1: Determination of Maximum Force
and Elongation at Maximum Force Using the
Strip Method Supersedes BS 2576: 1986; (L)
1999 Natural Gas - Guidelines to Traceability
in Analysis Also Numbered as BS 315611.0.3: 1999; Renumbers BS 3156-11.0.3:
1997; (W)
1997 Gas Welding Equipment - Rubber and
Plastic Hoses Assembled for Compressed or
Liquefied Gases up to a Maximum Design
BS EN ISO 14114
BS EN ISO 14122-1
BS EN ISO 14122-2
BS EN ISO 14122-3
BS EN ISO 14126
BS EN ISO 14181
BS EN ISO 14182
BS EN ISO 14246
BS EN ISO 14253-1
BS EN ISO 14257
BS EN ISO 14257
Pressure of 450 Bar (F)
1999 Gas Welding Equipment - Acetylene
Manifold Systems for Welding, Cutting and
Allied Processes - General Requirements (F)
2001 Safety of Machinery - Permanent
Means of Access to Machinery - Part 1:
Choice of a Fixed Means of Access between
Two Levels (R)
2001 Safety of Machinery - Permanent
Means of Access to Machinery - Part 2:
Working Platforms and Walkways (R)
2001 Safety of Machinery - Permanent
Means of Access to Machinery - Part 3:
Stairways, Stepladders and Guard-Rails (R)
1999 Fibre-Reinforced Plastic Composites Determination of Compressive Properties in
the In-Plane Direction (V)
2001 Methods for Analysis of Animal
Feeding Stuffs - Determination of Residues
of Organochlorine Pesticides - Gas
Chromatographic Method BS 5766-22: 2001;
(W)
2000 Animal Feeding Stuffs - Determination
of Residues of Organophosphorus Pesticides
- Gas Chromatographic Method Also Known
as BS 5766-20:2000; (W)
2001 Transportable Gas Cylinders - Gas
Cylinder Valves - Manufacturing Tests and
Inspections Partially Supersedes BS 341-1:
1991; (E)
1999 Geometrical Product Specifications
(GPS) - Inspection by Measurement of
Workpieces and Measuring Equipment - Part
1: Decision Rules for Proving Conformance
or Non-Conformance with Specifications (H)
2001 Corr 1 Acoustics - Measurement and
Parametric Description of Spatial Sound
Distribution Curves in Workrooms for
Evaluation of Their Acoustical Performance
ISO 14257: 2001; CORR 13673: January 25,
2002; (H)
2001 Acoustics - Measurement and
Parametric Description of Spatial Sound
Distribution Curves in Workrooms for
Evaluation of Their Acoustical Performance
ISO 14257:2001; (H)
BS EN ISO 14271
BS EN ISO 14271
BS EN ISO 14527-2
BS EN ISO 14527-3
BS EN ISO 14528-1
BS EN ISO 14528-2
BS EN ISO 14528-3
BS EN ISO 14529-1
BS EN ISO 14529-2
BS EN ISO 14529-3
BS EN ISO 14530-1
2001 Corr 1 Vickers Hardness Testing of
Resistance Spot, Projection and Seam Welds
(Low Load and Microhardness) CORR
13745: March 8, 2002; (F)
2001 Vickers Hardness Testing of Resistance
Spot, Projection and Seam Welds (Low Load
and Microhardness) (F)
2000 Plastics - Urea-Formaldehyde and
Urea/Melamine-Formaldehyde Powder
Moulding Compounds (UF- and UF/MFPMCs) - Part 2: Preparation of Test
Specimens and Determination of Properties
(V)
2000 Plastics - Urea-Formaldehyde and
Urea/Melamine-Formaldehyde Powder
Moulding Compounds (UF- and UF/MFPMCs) - Part 3: Requirements for Selected
Moulding Compounds (V)
2000 Plastics - Melamine-Formaldehyde
Powder Moulding Compounds (MF-PMCs) Part 1: Designation System and Basis for
Specifications (V)
2000 Plastics - Melamine-Formaldehyde
Powder Moulding Compounds (MF-PMCs) Part 2: Preparation of Test Specimens and
Determination of Properties (V)
2000 Plastics - Melamine-Formaldehyde
Powder Moulding Compounds (MF-PMCs) Part 3: Requirements for Selected Moulding
Compounds (V)
2000 Plastics - Melamine/Phenolic Powder
Moulding Compounds (MP-PMCs) - Part 1:
Designation System and Basis for
Specifications (V)
2000 Plastics - Melamine/Phenolic Powder
Moulding Compounds (MP-PMCs) - Part 2:
Preparation of Test Specimens and
Determination of Properties (V)
2000 Plastics - Melamine/Phenolic Powder
Moulding Compounds (MP-PMCs) - Part 3:
Requirements for Selected Moulding
Compounds (V)
2000 Plastics - Unsaturated-Polyester Powder
Moulding Compounds (Up-PMCs) - Part 1:
Designation System and Basis for
Specifications (V)
BS EN ISO 14530-2
BS EN ISO 14530-3
BS EN ISO 14554-1
BS EN ISO 14554-2
BS EN ISO 14565
BS EN ISO 14579
BS EN ISO 14580
BS EN ISO 14583
BS EN ISO 14584
BS EN ISO 14585
BS EN ISO 14587
BS EN ISO 14644-4
BS EN ISO 14946
BS EN ISO 15087-1
BS EN ISO 14660-1
2000 Plastics - Unsaturated-Polyester Powder
Moulding Compounds (Up-PMCs) - Part 2:
Preparation of Test Specimens and
Determination of Properties (V)
2000 Plastics - Unsaturated-Polyester Powder
Moulding Compounds (Up-PMCs) - Part 3:
Requirements for Selected Moulding
Compounds (V)
2001 Quality Requirements for Welding Resistance Welding of Metallic Materials Part 1: Comprehensive Quality Requirements
(F)
2001 Quality Requirements for Welding Resistance Welding of Metallic Materials Part 2: Elementary Quality Requirements (F)
2001 Animal Feeding Stuffs - Determination
of Vitamin A Content - Method Using HighPerformance Liquid Chromatography Also
Known as BS 5766-26:2001; (W)
2001 Corr 1 Hexalobular Socket Head Cap
Screws CORR 13768: March 12, 2002; (E)
2001 Corr 1 Hexalobular Socket Cheese
Head Screws CORR 13767: March 12, 2002;
(E)
(FAULTY STANDARD) 2001 Corr 1
Hexalobular Socket Pan Head Screws CORR
13479: March 13, 2002; (F)
2001 Corr 1 Hexalobular Socket Raised
Countersunk Head Screws CORR 13771:
March 08, 2002; (F)
2001 Corr 1 Hexalobular Socket Pan Head
Tapping Screws CORR 13770: March 08,
2002; (F)
2001 Hexalobular Socket Raised
Countersunk (Oval) Head Tapping Screws
(E)
2001 Cleanrooms and Associated Controlled
Environments - Part 4: Design, Construction
and Start-Up Supersedes BS 5295-2:1989;
(N)
2001 Small Craft - Maximum Load Capacity
(Q)
2001 Dental Elevators - Part 1: General
Requirements (N)
2000 Geometrical Product Specifications
(GPS) - Geometrical Features - Part 1:
BS EN ISP 10613-9
BS EN ISO 10618
BS EN ISO 10666
BS EN ISO 10669
BS EN ISO 10695
BS EN ISO 11143
BS EN ISO 10715
BS EN ISO 10960
BS EN ISO 10692-2
BS EN ISO 10705-2
BS EN ISO 10712
General Terms and Definitions This
Standard, Together with BS 8888 and Other
Implemented European and International
Standards Listed in Annexes A and B Of BS
8888, Supersedes a
1997 Information Technology - International
Standardized Profile RA - Relaying the
Connectionless-Mode Network Service Part
9: Definition of Profile RA51.1121, Relaying
the Connectionless-Mode Network Service
between CSMA/CS LAN Subnetworks and
PSDNs Usin
2000 Carbon Fibre - Determination of
Tensile Properties of Resin-Impregnated
Yarns (L)
1999 Drilling Screws with Tapping Screw
Threads - Mechanical and Functional
Properties (F)
1999 Plain Washers for Tapping Screw and
Washer Assemblies - Normal and Large
Series - Product Grade A (F)
2000 Water Quality - Determination of
Selected Organic Nitrogen and Phosphorus
Compounds - Gas Chromatographic Methods
(N)
2000 Dental Equipment - Amalgam
Separators (N)
2001 Natural Gas - Sampling Guidelines
Renumbers BS 3156-11.0.1:1997; (W)
1997 Rubber and Plastics Hoses Assessment of Ozone Resistance Under
Dynamic Conditions (E)
2001 Gas Cylinders - Gas Cylinder Valve
Connections for Use in the Microelectronics
Industry - Part 2: Specification and Type
Testing for Valve to Cylinder Connections
(H)
2001 Water Quality - Detection and
Enumeration of Bacteriophages - Part 2:
Enumeration of Somatic Coliphages ISO
10705-2:2000; Renumbers BS 60684.13:2000; (N)
1996 Water Quality - Pseudomonas Putida
Growth Inhibition Test (Pseudomonas Cell
Multiplication Inhibition Test) Also
Numbered as BS 6068: Section 5.19: 1996;
BS EN ISO 10724-1
BS EN ISO 10724-2
BS EN ISO 10819
BS EN ISO 10964
BS EN ISO 10993-5
BS EN ISO 10993-8
BS EN ISO 10993-9
BS EN ISO 10993-9
BS EN ISO 10993-15
BS EN ISO 10993-16
BS EN ISO 11064-1
(N)
2001 Plastics - Injection Moulding of Test
Specimens of Thermosetting Powder
Moulding Compounds (PMCs) - Part 1:
General Principles and Moulding of
Multipurpose Test Specimens Renumbers BS
ISO 10724-1: 1998; (V)
2001 Plastics - Injection Moulding of Test
Specimens of Thermosetting Powder
Moulding Compounds (PMCs) - Part 2:
Small Plates ISO 10724-2:1998; Renumbers
BS ISO 10724-2: 1998; (V)
1997 Mechanical Vibration and Shock Hand-Arm Vibration - Method for the
Measurement and Evaluation of the Vibration
Transmissibility of Gloves at the Palm of the
Hand (F)
1997 Adhesives - Determination of Torque
Strength of Anaerobic Adhesives on
Threaded Fasteners Supersedes BS 5350:
Part G1: 1987; (W)
1999 Biological Evaluation of Medical
Devices - Part 5: Tests for In Vitro
Cytotoxicity Supersedes BS EN 309935:1994; (N)
2001 Biological Evaluation of Medical
Devices - Part 8: Selection and Qualification
of Reference Materials for Biological Tests
(N)
1999 Biological Evaluation of Medical
Devices - Part 9: Framework for
Identification and Quantification of Potential
Degradation Products (N)
1999 Amd 1 Biological Evaluation of
Medical Devices - Part 9: Framework for
Identification and Quantification of Potential
Degradation Products AMD 10742: January
2000;(N)
2001 Biological Evaluation of Medical
Devices - Part 15: Identification and
Quantification of Degradation Products from
Metals and Alloys (N)
1997 Biological Evaluation of Medical
Devices Part 16:Toxicokinetic Study Design
for Degradation Products and Leachables (N)
2001 Ergonomic Design of Control Centres -
BS EN ISO 11116-1
BS EN ISO 11116-2
BS EN ISO 11120
BS EN ISO 11145
BS EN ISO 11146
BS EN ISO 11149
BS EN ISO 11124-1
BS EN ISO 11124-2
BS EN ISO 11124-3
BS EN ISO 11124-4
Part 1: Principles for the Design of Control
Centres (G)
1999 Gas Cylinders - 17E Taper Thread for
Connection of Valves to Gas Cylinders - Part
1: Specifications (E)
1999 Gas Cylinders - 17E Taper Thread for
Connection of Valves to Gas Cylinders - Part
2: Inspection Guages (E)
1999 Gas Cylinders - Refillable Seamless
Steel Tubes for Compressed Gas Transport,
of Water Capacity between 150 l and 3000 l Design, Construction and Testing (E)
2001 Optics and Optical Instruments - Lasers
and Laser-Related Equipment - Vocabulary
and Symbols (H)
2000 Laser and Laser-Related Equipment Test Methods for Laser Beam Parameters Beam Width, Divergence Angle and Beam
(H)
1997 Optics and Optical Instruments - Lasers
and Laser Related Equipment - Fibre Optic
Connectors for Non-Telecommunication
Laser Applications (H)
1997 Preparation of Steel Substrates Before
Application of Paints and Related Products Specifications for Metallic Blast-Cleaning
Abrasives Part 1: General Introduction and
Classification Renumbers as BS 7079: Part
E1: 1994; (V)
1997 Preparation of Steel Substrates Before
Application of Paints and Related Products Specifications for Metallic Blast-Cleaning
Abrasives Part 2: Chilled-Iron Grit
Renumbers as BS 7079: Part E2: 1994; (V)
1997 Preparation of Steel Substrates Before
Application of Paints and Related Products Specifications for Metallic Blast-Cleaning
Abrasives Part 3: High-Carbon Cast-Steel
Shot and Grit Renumbers as BS 7079: Part
E3: 1994; Together with Part 4, This Part
1997 Preparation of Steel Substrates Before
Application of Paints and Related Products Specifications for Metallic Blast-Cleaning
Abrasives Part 4: Low-Carbon Cast-Steel
Shot Renumbers as BS 7079: Part E4: 1994;
Together with Part 3, This Part of BS EN
BS EN ISO 11125-1
BS EN ISO 11125-2
BS EN ISO 11125-3
BS EN ISO 11125-4
BS EN ISO 11125-5
BS EN ISO 11125-6
BS EN ISO 11125-7
BS EN ISO 11126-1
1997 Preparation of Steel Substrates Before
Application of Paints and Related Products Test Methods for Metallic Blast-Cleaning
Abrasives Part 1: Sampling Renumbers BS
7079: Part E6: 1994; (V)
1997 Preparation of Steel Substrates Before
Application of Paints and Related Products Test Methods for Metallic Blast-Cleaning
Abrasives Part 2: Determination of Particle
Size Distribution Renumbers BS 7079: Part
E7: 1994; (V)
1997 Preparation of Steel Substrates Before
Application of Paints and Related Products Test Methods for Metallic Blast-Cleaning
Abrasives Part 3: Determination of Hardness
Renumbers BS 7079: Part E8: 1994; (V)
1997 Preparation of Steel Substrates Before
Application of Paints and Related Products Test Methods for Metallic Blast-Cleaning
Abrasives Part 4: Determination of Apparent
Density Renumbers BS 7079: Part E9: 1994;
(V)
1997 Preparation of Steel Substrates Before
Application of Paints and Related Products Test Methods for Metallic Blast-Cleaning
Abrasives Part 5: Determination of
Percentage Defective Particles and of
Microstructure Renumbers BS 7079: Part
E10: 1994; (V
1997 Preparation of Steel Substrates Before
Application of Paints and Related Products Test Methods for Metallic Blast-Cleaning
Abrasives Part 6: Determination of Foreign
Matter Renumbers BS 7079: Part E11: 1994;
(V)
1997 Preparation of Steel Substrates Before
Application of Paints and Related Products Test Methods for Metallic Blast-Cleaning
Abrasives Part 7: Determination of Moisture
Renumbers BS 7079: Part E12: 1994; (V)
1997 Preparation of Steel Substrates Before
Application of Paints and Related Products
Group F: Non-Metallic Blast Cleaning
Abrasives Part F1: General Introduction and
Classification Also Numbered as BS 7079:
Part F1: 1997; Supersedes BS 7079: Part F1:
BS EN ISO 11151-1
BS EN ISO 11151-2
BS EN ISO 11196
BS EN ISO 11126-7
BS EN ISO/ IEC 11172-1
BS EN ISO/ IEC 11172-2
BS EN ISO/ IEC 11172-3
BS EN ISO 11244
BS EN ISO 11245
BS EN ISO/IEC 11172-4
BS EN ISP 11183-1
19
2000 Lasers and Laser-Related Equipment Standard Optical Components - Part 1:
Components for the UV, Visible and NearInfrared Spectral Ranges (S)
2000 Lasers and Laser-Related Equipment Standard Optical Components - Part 2:
Components for the Infrared Spectral Range
(H)
1997 Anaesthetic Gas Monitors (N)
2001 Preparation of Steel Substrates Before
Application of Paints and Related Products Specification for Non-Metallic BlastCleaning Abrasives Part 7: Fused Aluminium
Oxide Renumbers BS 7079-F7: 1996; (V)
1995 Amd 0 Information Technology Coding of Moving Pictures and Associated
Audio for Digital Storage Media at up to
About 1,5 Mbit/s Part 1: Systems (AMD
8797) September 15, 1995 (S)
1995 Amd 0 Information Technology Coding of Moving Pictures and Associated
Audio for Digital Storage Media at up to
About 1,5 Mbit/s Part 2: Video (AMD 8798)
September 15, 1995 (S)
1995 Amd 0 Information Technology Coding of Moving Pictures and Associated
Audio for Digital Storage Media at up to
About 1,5 Mbit/s Part 3: Audio (AMD 8796)
September 15, 1995 (S)
2000 Dental Brazing Investments (N)
2000 Dental Restorations - PhosphateBonded Refractory Die Materials (N)
1997 AMD 1 Information Technology Coding of Moving Pictures and Associated
Audio for Digital Storage Media at up to
About 1,5 Mbit/s Part 4: Compliance Testing
Renumbering BS ISO/IEC 11172-4: 1995;
AMD 9418 March 15, 1997; (S)
1995 Amd 0 Information Technology International Standardized Profiles AOM1n
OSI Management - Part 1: Specification of
ACSE, Presentation and Session Protocols
for the Use by ROSE and CMISE (AMD
8658) July 15, 1995 (Formerly BS ISO/IEC
ISP 11183-1: 1992)
BS EN ISP 11183-2
BS EN ISP 11183-3
BS EN ISP 11185-1
BS EN ISP 11185-2
BS EN ISP 11185-3
BS EN ISO 11199-1
BS EN ISO 11199-2
BS EN ISO 11212-1
BS EN ISO 11212-2
1995 Amd 0 Information Technology International Standardized Profiles AOM1n
OSI Management - Management
Communications - Part 2: CMISE/ROSE for
AOM12 - Enchanced Management
Communications (AMD 8656) July 15, 1995
(Formerly BS ISO/IEC ISP 11183-2: 1992)
1995 Amd 0 Information Technology International Standardized Profiles AOM1n
OSI Management - Management
Communications - Part 3: CMISE/ROSE for
AOM11 - Basic Management
Communications (AMD 8657) July 15, 1995
(Formerly BS ISO/IEC ISP 11183-3: 1992)
(S)
1996 Information Technology - International
Standardized Profiles FVT2nn - Virtual
Terminal Basic Class - Register of Control
Object Type Definitions Part 1: FVT211,
FVT212 - Sequenced and Unsequenced
Application Control Objects (S)
1996 Information Technology - International
Standardized Profiles FVT2nn - Virtual
Terminal Basic Class - Register of Control
Object Type Definitions Part 2: FVT213,
FVT214 - Sequenced and Unsequenced
Terminal Control Objects (S)
1996 Amd 1 Information Technology International Standardized Profiles FVT2nn Virtual Terminal Basic Class - Register of
Control Object Type Definitions Part 3:
FVT215, FVT216 - Application RIO Record
Loading Control Object, Terminal RIO
Record Notific
1999 Walking Aids Manipulated by Both
Arms - Requirements and Test Methods Part 1: Walking Frames Supersedes BS
4986:1990 and BS 5104:1990; (N)
1999 Walking Aids Manipulated by Both
Arms - Requirements and Test Methods Part 2: Rollators (N)
1997 Starch and Derived Products - Heavy
Metals Content Part 1: Determination of
Arsenic Content by Atomic Absorption
Spectrometry (W)
1997 Starch and Derived Products - Heavy
BS EN ISP 11185-4
BS EN ISP 11185-5
BS EN ISP 11185-6
BS EN ISP 11185-7
BS EN ISP 11185-8
BS EN ISP 11185-9
BS EN ISP 11185-10
Metals Content Part 2: Determination of
Mercury Content by Atomic Absorption
Spectrometry (W)
1996 Amd 1 Information Technology International Standardized Profiles FVT2nn Virtual Terminal Basic Class - Register of
Control Object Type Definitions Part 4:
FVT217 - Horizontal Tabulation Control
Object(AMD 9002) January 15, 1996
(Formerly BS ISO/I
1996 Amd 1 Information Technology International Standardized Profiles FVT2nn Virtual Terminal Basic Class - Register of
Control Object Type Definitions Part 5:
FVT218 - Logical Image Control Object
(AMD 9003) February 15, 1996 (Formerly
BS ISO/IEC ISP
1996 Amd 1 Information Technology International Standardized Profiles FVT2nn Virtual Terminal Basic Class - Register of
Control Object Type Definitions Part 6:
FVT219 - Status Message Control Object
(AMD 9004) February 15, 1996 (Formerly
BS ISO/IEC IS
1996 Amd 1 Information Technology International Standardized Profiles FVT2nn Virtual Terminal Basic Class - Register of
Control Object Type Definitions Part 7:
FVT2110 - Entry- Control Control Object
(AMD 9005) February 15, 1996 (Formerly
BS ISO/IEC I
1996 Amd 1 Information Technology International Standardized Profiles FVT2nn Virtual Terminal Basic Class - Register of
Control Object Type Definitions Part 8:
FFVT221 - Forms FEICO (Field Entry
Instruction Control Object) No. 1 (AMD
9006) February 15
1996 Amd 1 Information Technology International Standardized Profiles FVT2nn Virtual Terminal Basic Class - Register of
Control Object Type Definitions Part 9:
FVT222 - Paged FEICO (Field Entry
Instruction Control Object) No. 1 (AMD
9007) February 15,
1996 Amd 1 Information Technology -
BS EN ISP 11185-11
BS EN ISP 11188-1
BS EN ISP 11190
BS EN ISO 11212-3
BS EN ISO 11213
BS EN ISO 11214
BS EN ISO 11254-1
BS EN ISO 11674
BS EN ISO 11254-2
BS EN ISO 11248
International Standardized Profiles FVT2nn Virtual Terminal Basic Class - Register of
Control Object Type Definitions Part 10:
FVT231 - Forms FEPCO (Field Entry Pilot
Control Object) No. 1 (AMD 9008) March
15, 1996 (S
1996 Amd 1 Information Technology International Standardized Profiles FVT2nn Virtual Terminal Basic Class - Register of
Control Object Type Definitions Part 11:
FVT232 - Paged FEPCO (Field Entry Pilot
Control Object) No. 1 (AMD 9009) February
15, 1996
1997 Information Technology - International
Standardized Profiles - Common Upper
Layer Requirements Part 1: Basic Connection
Oriented Requirements Previously BS
ISO/IEC ISP 11188-1: 1995; (S)
1996 Amd 1 Information Technology International Standardized Profile FD13 Directory Data Definitions - FTAM Use of
the Directory (AMD 8860) July 15, 1996 (S)
1997 Starch and Derived Products - Heavy
Metals Content Part 3: Determination of
Lead Content by Atomic Absorption
Spectrometry with Electrothermal
Atomization (W)
1995 Modified Starch - Determination of
Acetyl Content - Enzymatic Method (W)
1996 Modified Starch - Determination of
Carboxyl Group Content of Oxidized Starch
(W)
2000 Lasers and Laser-Related Equipment Determination of Laser-Induced Damage
Treshold of Optical Surfaces - Part 1: 1-on-1
Test (S)
2001 Ships and Marine Technology Heading Control Systems (Q)
2001 Lasers and Laser-Related Equipment Determination of Laser-Induced Damage
Treshold of Optical Surfaces - Part 2: S-on-1
Test (S)
2000 Plastics - Thermosetting Moulding
Materials - Evaluation of Short-Term
Performance at Elevated Temperatures
Renumbers BS 2782-1 Method 136: 1994;
BS EN ISO 11290-1
BS EN ISO 11334-1
BS EN ISO 11334-4
BS EN ISO 11348-3
BS EN ISO 11357-1
BS IEC 61112
BS EN ISO 11358
BS EN ISO 11376
BS EN ISO 11378-2
BS EN ISO 11378-2
BS EN ISO 11380
BS EN ISO 11381
BS EN ISO 11399
(V)
1997 Microbiology of Food and Animal
Feeding Stuffs - Horizontal Method for the
Detection and Enumeration of Listeria
Monocytogenes Part 1: Detection Method
Also Known as BS 5763: Part 18: 1997; (N)
1997 Walking Aids Manipulated by One
Arm - Requirements and Test Methods Part
1: Elbow Crutches Supersedes BS 4988:
1990(N)
1999 Walking Aids Manipulated by One
Arm - Requirements and Test Methods - Part
4: Walking Sticks with Three or More Legs
BS 4922: 1990; (W)
1999 Water Quality - Determination of the
Inhibitory Effect of Water Samples on the
Light Emission of Vibrio Fischeri
(Luminescent Bacteria Test) - Part 3: Method
Using Freeze-Dried Bacteria (N)
1997 Plastics - Differential Scanning
Calorimetry (DSC) Part 1: General Principles
(V)
1992 Blankets of Insulating Material for
Electrical Purposes (E)
1997 Plastics - Thermogravimetry (TG) of
Polymers - General Principles Also
Numbered as BS 2782: Part 1: Method 127A:
1997; (V)
2001 Plastics - Epoxy Resins and Glycidyl
Esters - Determination of Inorganic Chlorine
Renumbers BS ISO 11376:1997; (V)
2001 Textile Floor Coverings - Laboratory
Soiling Tests - Part 2: Drum Test (L)
2001 Corr 1 Textile Floor Coverings Laboratory Soiling Tests - Part 2: Drum Test
CORR 13489:October 11,2001; (L)
1997 Amd 1 Optics and Optical Instruments Ophthalmic Optics - Formers AMD
9447:June 15, 1997; (H)
1997 Optics and Optical Instruments Ophthalmic Optics - Screws Threads
Renumbers BS 3172: 1995; (N)
2001 Ergonomics of the Thermal
Environment - Principles and Application of
Relevant International Standards Renumbers
BS ISO 11399:1995; (N)
BS EN ISO 11403-1
BS EN ISO 11403-2
BS EN ISO 11439
BS EN ISO 11439
BS EN ISO 11442-1
BS EN ISO 11442-2
BS EN ISO 11442-3
BS EN ISO 11469
BS EN ISO 11442-4
BS EN ISO 11498
BS EN ISO 11499
BS EN ISO 11539
2000 Amd 1 Plastics - Acquisition and
Presentation of Comparable Multipoint Data
- Part 1: Mechanical Properties AMD 10683:
September 2000; Renumbers BS ISO 114031: 1994; (V)
2000 Plastics - Acquisition and Presentation
of Comparable Multipoint Data - Part 2:
Thermal and Processing Properties
Renumbers BS ISO 11403-2: 1995; (V)
2000 Gas Cylinders - High Pressure
Cylinders for the On-Board Storage of
Natural Gas as a Fuel for Automotive
Vehicles (H)
2000 Amd 1 Gas Cylinders - High Pressure
Cylinders for the On-Board Storage of
Natural Gas as a Fuel for Automotive
Vehicles AMD 13215: November 15, 2001;
ISO 11439:2001; (H)
1996 Technical Product Documentation Handling of Computer-Based Technical
Information Part 1: Security Requirements
(G)
1996 Technical Product Documentation Handling of Computer-Based Technical
Information Part 2: Original Documentation
(G)
1996 Technical Product Documentation Handling of Computer-Based Technical
Information Part 3: Phases in the Product
Design Process (G)
2000 Plastics - Generic Identification and
Marking of Plastics Products Supersedes BS
7746: 1994; (V)
1996 Technical Product Documentation Handling of Computer-Based Technical
Information Part 4: Document Management
and Retrieval Systems Also Known as BS
308: Sec 4: 1996; (G)
2000 Dental Handpieces - Dental LowVoltage Electric Motors Renumbers BS ISO
11498: 1997; (N)
1999 Dental Cartridges for Local
Anaesthetics Renumbers BS ISO 11499:
1999; (N)
1999 Ophthalmic Optics - Contact Lenses Classification of Contact Lenses and Contact
BS EN ISO 11542-1
BS EN ISO/ IEC 11544
BS EN ISO 11545
BS EN ISO 11551
BS EN ISO 11592
BS EN ISO 11592
BS EN ISO 11606
BS EN ISO 11654
BS EN ISO 11667
BS EN ISO 11670
BS EN ISO 11674
BS EN ISO 11680-2
Lens Materials (N)
2001 Plastics - Ultra-High-Molecular-Weight
Polyethylene (PE-EHMW) Moulding and
Extrusion Materials - Part 1: Designation
System and Basis for Specifications
Supersedes BS ISO 11542-1:1994; (V)
1995 Amd 0 Information Technology Coded Representation of Picture and Audio
Information - Progressive Bi-Level Image
Compression (AMD 8799) September
15,1995 (S)
2001 Agricultural Irrigation Equipment Centre-Pivot and Moving Lateral Irrigation
Machines with Sprayer or Sprinkler Nozzles
- Determination of Uniformity of Water
Distribution (E)
1997 Optics and Optical Instruments - Lasers
and Laser-Related Equipment - Test Method
for Absorptance of Optical Laser
Components ISO 11551: 1997; (H)
2001 Corr 1 Small Craft Less Than 8 m
Length of Hull - Determination of Maximum
Propulsion Power Rating CORR 13738:
March 12, 2002; (Q)
2001 Small Craft Less Than 8 m Length of
Hull - Determination Propulsion Power
Rating (Q)
2001 Ships and Marine Technology - Marine
Electromagnetic Compasses Supersedes BS
ISO 11606:1997; (Q)
1997 Acoustics - Sound Absorbers for Use in
Buildings - Rating of Sound Absorption (R)
2000 Fibre Reinforced Plastics - Mouldings
Compounds and Prepregs - Determination of
Resin, Reinforcement-Fibre and MineralFiller Content - Dissolution Methods
Renumbers BS ISO 11667: 1997; (V)
2000 Lasers - Test Methods for Laser Beam
Parameters - Beam Positional Stability (S)
2001 Corr 1 Ships and Marine Technology Heading Control Systems CORR 13650:
January 24, 2002; (Q)
2001 Machinery for Forestry - Safety
Requirements and Testing for Pole-Mounted
Powered Pruners - Part 2: Units for Use with
a Back-Pack Power Source (E)
BS EN ISO 11680-2
BS EN ISO 11689
BS EN ISO 11690-1
BS EN ISO 11690-2
BS EN ISO 11812
BS EN ISO 11979-1
BS EN ISO 11691
BS EN ISO 11737-2
BS EN ISP 12070-1
BS EN ISO 9556
BS EN ISO 9556
BS EN ISO/IEC 9592-4
2001 Amd 1 Machinery for Forestry - Safety
Requirements and Testing for Pole-Mounted
Powered Pruners - Part 2: Units for Use with
a Back-Pack Power Source AMD 13487:
October 23, 2001; ISO 11680-2:2000; (E)
1997 Acoustics - Procedure for the
Comparison of Noise-Emission Data for
Machinery and Equipment (F)
1997 Acoustics - Recommended Practice for
the Design of Low-Noise Workplaces
Containing Machinery Part 1: Noise Control
Strategies (F)
1997 Acoustics - Recommended Practice for
the Design of Low-Noise Workplaces
Containing Machinery Part 2: Noise Control
Measures (F)
2002 Small Craft - Watertight Cockpits and
Quick-Draining Cockpits (Q)
2000 Ophthalmic Implants - Intraocular
Lenses - Part 1: Vocabulary (N)
1997 Acoustics - Measurement of Insertion
Loss of Ducted Silencers without Flow Laboratory Survey Method (F)
2000 Sterilization of Medical Devices Microbiological Methods - Part 2: Tests of
Sterility Performed in the Validation of a
Sterilization Process (N)
1997 Information Technology - International
Standardized Profiles FCSnnn - Character Set
8-Bit Code Structure Based on ISO/IEC 2022
- Part 1: FCS111 - 2022 Option 1 ISO/IEC
ISP 12070-1: 1996; (S)
2001 Corr 1 Steel and Iron - Determination
of Total Carbon Content - Infrared
Absorption Method After Combustion in an
Induction Furnace CORR 13762: March 13,
2002; Supersedes BS 6200-3.8.3:1990; (V)
2001 Steel and Iron - Determination of Total
Carbon Content - Infrared Absorption
Method After Combustion in an Induction
Furnace Supersedes BS 6200-3.8.3:1990; (V)
1997 Information Processing Systems Computer Graphics - Programmer's
Hierarchical Interactive Graphics System
(PHIGS) Part 4: Plus Lumiere und Surfaces,
PHIGS, PLUS Renumbers BS ISO/IEC
BS EN ISO/ IEC 9646-1
BS EN ISO/ IEC 9646-4
BS EN ISO 9653
BS EN ISO 9614-1
BS EN ISO/ IEC 9646-2
BS EN ISO/ IEC 9646-5
BS EN ISO/ IEC 9646-6
BS EN ISO/IEC 9661
BS EN ISO 9665
BS EN ISO 9692-3
BS EN ISO 9694
9592-4:1992 (S)
1996 Information Technology - Open
Systems Interconnection - Conformance
Testing Methodology and Framework Part 1:
General Concepts (S)
1996 Information Technology - Open
Systems Interconnection - Conformance
Testing Methodology and Framework Part 4:
Test Realization (S)
2000 Adhesives - Test Method for Shear
Strength of Adhesive Bonds ISO 9653: 1998:
Supersedes BS EN 29653: 1994: Which is
Withdrawn; (W)
1995 Amd 1 Acoustics - Determination of
Sound Power Levels of Noise Sources Using
Sound Intensity Part 1: Measurement at
Discrete Points (AMD 8934) December 15,
1995 (Formerly BS 7703: Part 1: 1993) (F)
1996 Information Technology - Open
Systems Interconnection - Conformance
Testing Methodology and Framework Part 2:
Abstract Test Suite Specification (S)
1996 Information Technology - Open
Systems Interconnection - Conformance
Testing Methodology and Framework Part 5:
Requirements on Test Laboratories and
Clients for the Conformance Assessment
Process (S)
1996 Information Technology - Open
Systems Interconnection - Conformance
Testing Methodology and Framework Part 6:
Protocol Profile Test Specification (S)
1997 Information Technology - Data
Interchange on 12,7 mm Wide Magnetic
Tape Cartridges - 18 Tracks, 1 491 Data
Bytes per Millimetre Supersedes BS 7062:
1989; (S)
2000 Adhesives - Animal Glues - Methods
for Sampling and Testing ISO 9665: 1998;
(W)
2001 Welding and Allied Processes Recommendations for Joint Preparation - Part
3: Metal Inert Gas Welding and Tungsten
Inert Gas Welding of Aluminium and Its
Alloys (F)
1999 Dental Phosphate-Bonded Casting
BS EN ISO 9706
BS EN ISO 9707
BS EN ISO 9771
BS EN ISO 9801
BS EN ISO 9856
BS EN ISO 9917-2
BS EN ISO 9994
BS EN ISO 9863-2
BS EN ISO 9873
BS EN ISO 9887
BS EN ISO 9906
BS EN ISO 9906
BS EN ISO 9914
Investments Renumbers BS ISO 9694: 1996;
Supersedes BS 5189-2: 1975; (N)
2000 Information and Documentation - Paper
for Documents - Requirements for
Permanence Renumbers BS ISO 9706: 1994;
(G)
1995 Information and Documentation Statistics on the Production and Distribution
of Books, Newspapers, Periodicals and
Electronic Publications Supersedes BS ISO
9707: 1991; (S)
1997 Plastics - Phenolic Resins Determination of the Pseudo-Asiabatic
Temperature Rise of Liquid Resols When
Cured under Acid Conditions Also Known as
BS 2782: Part 4: Method 451P: 1997; (V)
1999 Ophthalmic Instruments - Trial Case
Lenses Renumbers BS ISO 9801: 1997; (H)
1996 Amd 1 Conveyor Belts - Determination
of Elastic Modulus (AMD 9018) March 15,
1996 (Q)
2000 Dental Water-Based Cements - Part 2:
Light-Activated Cements (N)
1996 Lighters - Safety Specification (L)
1996 Geotextiles and Geotextile-Related
Products - Determination of Thickness at
Specified Pressures Part 2: Procedure for
Determination of Thickness of Single Layers
of Multilayer Products (L)
2000 Dental Hand Instruments - Reusable
Mirrors and Handles Supersedes BS EN
29873: 1994; (N)
1995 Water Quality - Evaluation of the
Aerobic Biodegradability of Organic
Compounds in an Aqueous Medium - SemiContinuous Activated Sludge Method
(SCAS) (Also Numbered BS 6068: Part 5:
Section 5.14: 1995) (N)
2000 Corr 1 Rotodynamic Pumps - Hydraulic
Performance Acceptance Tests - Grades 1
and 2 CORR 13508: January 30, 2001; (E)
2000 Rotodynamic Pumps - Hydraulic
Performance Acceptance Tests - Grades 1
and 2 (E)
1997 Optics and Optical Instruments Contact Lenses - Determination of Refractive
BS EN ISO 9888
BS EN ISO 9902-1
BS EN ISO 9902-2
BS EN ISO 9902-3
BS EN ISO 9902-4
BS EN ISO 9902-5
BS EN ISO 9902-6
BS EN ISO 9902-7
BS EN ISO 9913-2
Index of Contact Lens Materials (H)
1999 Water Quality - Evaluation of Ultimate
Aerobic Biodegradability of Organic
Compounds in Aqueous Medium - Static
Test (Zahn-Wellens Method) Supersedes BS
EN 29888:1993; Also Numbered as BS
6068-5.13:1999; (N)
2001 Textile Machinery - Determination of
Noise Emission - Part 1: Common
Requirements Together with BS EN ISO
9902-2 to -7, Supersedes BS ISO 9902:1993;
(L)
2001 Textile Machinery - Noise Test Code Part 2: Spinning Preparatory and Spinning
Machinery Together with BS EN ISO 99021, -3 to -7, Supersedes BS ISO 9902:1993;
(L)
2001 Textile Machinery - Determination of
Noise Emission - Part 3: Nonwoven
Machines Together with BS EN ISO 9902-1,
-2 and -4 to -7, Supersedes BS ISO
9902:1993; (L)
2001 Textile Machinery - Determination of
Noise Emission - Part 4: Yarn Processing,
Cordage and Rope Manufacturing Machines
Together with BS EN ISO 9902-1 to -3 and 5 to -7, Supersedes BS ISO 9902:1993; (L)
2001 Textile Machinery - Determination of
Noise Emission - Part 5: Weaving and
Knitting Preparatory Machinery Together
with BS EN ISO 9902-1 to -4, -6 and -7;
Supersedes BS ISO 9902:1993; (L)
2001 Textile Machinery - Determination of
Noise Emission - Part 6: Fabric
Manufacturing Machines Together with BS
EN ISO 9902-1 to -5 and -7, Supersedes BS
ISO 9902:1993; (L)
2001 Textile Machinery - Determination of
Noise Emission - Part 7: Dyeing and
Finishing Machines Together with BS EN
ISO 9902-1 to -6, Supersedes BS ISO
9902:1993; (L)
2000 Optics and Optical Instruments Contact Lenses - Part 2: Determination of
Oxygen Permeability and Transmissibility by
the Coulometric Method Also Numbered as
BS EN ISO 9946
BS EN ISO 9956-10
BS EN ISO 9956-11
BS EN ISO 9974-1
BS EN ISO 9974-1
BS EN ISO 9974-2
BS EN ISO 10007
BS EN ISO 10058
BS EN ISO 10075-1
BS EN ISO 10075-2
BS EN ISO 9974-3
BS EN ISO 10062
BS 7208-23: 2000; (N)
1999 Manipulating Industrial Robots Presentation of Characteristics Supersedes
BS 7228-3: 1991; (Q)
1997 Approval of Welding Procedures for
Metallic Materials Part 10: Welding
Procedure Specification for Electron Beam
Welding (F)
1997 Approval of Welding Procedures for
Metallic Materials Part 11: Welding
Procedure Specification for Laser Beam
Welding (F)
2000 Connections for General Use and Fluid
Power - Ports and Stud Ends with ISO 261
Threads with Elastomeric or Metal-To-Metal
Sealing - Part 1: Threaded Ports (E)
2000 Corr 1 Connections for General Use
and Fluid Power - Ports and Stud Ends with
ISO 261 Threads with Elastomeric or MetalTo-Metal Sealing - Part 1: Threaded Ports
CORR 11069; September 2000;
Incorporating Corrigendum No. 1; (E)
2000 Connections for General Use and Fluid
Power - Ports and Stud Ends with ISO 261
Threads with Elastomeric or Metal-To-Metal
Sealing - Part 2: Stud Ends with Elastromeric
Sealing (Type E) (E)
1997 Quality Management - Guidelines for
Configuration Management Renumbers BS
ISO 10007: 1995; (G)
1996 Magnesites and Dolomites - Chemical
Analysis (F)
2000 Ergonomic Principles Related to Mental
Work-Load - Part 1: General Terms and
Definitions ISO 10075:1991; (N)
2000 Ergonomic Principles Related to Mental
Workload - Part 2: Design Principles (N)
2000 Connections for General Use and Fluid
Power - Ports and Stud Ends with ISO 261
Threads with Elastomeric or Metal-To-Metal
Sealing - Part 3: Stud Ends with Metal-ToMetal Sealing (Type B) (E)
1995 Amd 1 Corrosion Tests in Artificial
Atmospheres at Very Low Concentrations of
Polluting Gas(es) (AMD 8615) August 15,
1995 (Formerly BS 7561: 1992) (V)
BS EN ISO 10239
BS EN ISO 10088
BS EN ISO 10139-2
BS EN ISO 10209-2
BS EN ISO 10211-1
BS EN ISO 10239
BS EN ISO 10248
BS EN ISO 10249
BS EN ISO 10280
BS EN ISO 10289
BS EN ISO 10301
2000 Small Craft - Liquified Petroleum Gas
(LPG) Systems (Q)
2001 Small Craft - Permanently Installed
Fuel Systems and Fixed Fuel Tanks (Q)
2001 Dentistry - Soft Lining Materials for
Removable Dentures - Part 2: Materials for
Long-Term Use (N)
1996 Technical Product Documentation Vocabulary Part 2: Terms Relating to
Projection Methods (G)
1996 Thermal Bridges in Building
Construction - Heat Flows and Surface
Temperatures Part 1: General Calculation
Methods (F)
2000 Amd 1 Small Craft - Liquified
Petroleum Gas (LPG) Systems AMD
13277:February 28,2002; (Q)
2000 Fluid Fertilizers - De-Aeration of
Suspension Samples by Film Disentrainment
Incorporating Amendment No. 1 to BS 55512.11:1999 (Renumbers the BS as BS EN ISO
10248:2000); (W)
2000 Fluid Fertilizers - Preliminary Visual
Examination and Preparation of Samples for
Physical Testing Incorporating Amendment
No. 1 to BS 5551-2.12:1997 (Renumbers the
BS as BS EN ISO 10249:2000); (W)
1995 Amd 1 Steel and Iron - Determination
of Titanium Content - Diantipyrylmethane
Spectrophotometric Method (AMD 8697)
December 15, 1995 (Formerly BS 6200: Part
3: Sec 3.32: Subsec 3.32.1: 1991 Replaces
BS 6200: Part 3: Sect 3.32 :Subsec 3.32.1:
1986) (V
2001 Methods for Corrosion Testing of
Metallic and Other Inorganic Coatings on
Metallic Substrates - Rating of Test
Specimens and Manufactured Articles
Subjected to Corrosion Tests Supersedes BS
EN ISO 1462:1995, BS EN ISO 4540:1995
and BS EN ISO 8403:199
1997 Water Quality - Determination of
Highly Volatile Halogenated Hydrocarbons Gas-Chromatographic Methods Also
Numbered as BS 6068: Section 2.58: 1997;
(N)
BS EN ISO 10304-2
BS EN ISO 10304-3
BS EN ISO 10304-4
BS EN ISO 10308
BS EN ISO 10319
BS EN ISO 10321
BS EN ISO 10340
BS EN ISO 10339
BS EN ISO 10341
BS EN ISO 10342
BS EN ISO 10343
BS EN ISO 10350-1
BS EN ISO 10510
BS EN ISO 10350-2
1997 Water Quality Determination of
Dissolved Anions by Liquid Chromatography
of Ions Part 2: Determination of Bromide,
Chloride, Nitrate, Nitrite, Orthophosphate
and Sulfate in Waste Water (N)
1997 Water Quality - Determination of
Dissolved Anions by Liquid Chromatography
of Ions - Determination of Chromate, Iodide,
Sulfite, Thiocyanate and Thiosulfate Also
Known as BS 6068: Section 2.59: 1997; (N)
2000 Water Quality - Determination of
Dissolved Anions by Liquid Chromatography
of Ions - Part 4: Determination of Dissolved
Chlorate, Chloride and Chlorite in Water
with Low Contamination Also Known as BS
6068-2.66:1999; (N)
1997 Metallic Coatings - Review of Porosity
Tests (V)
1996 Geotextiles - Wide-Width Tensile Test
(ISO 10319: 1993) (L)
1996 Geotextiles - Tensile Test for
Joints/Seams by Wide-Width Method (ISO
10321: 1992) (L)
1997 Contact Lenses Part 5: Method for
Determination of Solvent Extractable
Substances (N)
1999 Ophthalmic Optics - Contact Lenses Determination of Water Content of Hydrogel
Lenses Also Numbered as BS 7208-13: 1997;
Renumbers BS ISO 10339: 1997; (N)
1999 Ophthalmic Instruments - Refractor
Heads Renumbers BS ISO 10341: 1997; (N)
1999 Ophthalmic Instruments - Eye
Refractometers Renumbers BS ISO 10342:
1997; (N)
1999 Ophthalmic Instruments Ophthalmometers Renumbers BS ISO 10343:
1997; (N)
2001 Plastics - Acquisition and Presentation
of Comparable Single-Point Data - Part 1:
Moulding Materials Supersedes BS EN ISO
10350: 1995; (V)
2000 Tapping Screw and Washer Assemblies
with Plain Washers (E)
2001 Plastics - Acquisition and Presentation
of Comparable Single-Point Data - Part 2:
BS EN ISO 10352
BS EN ISO 10360-1
BS EN ISO 10360-3
BS EN ISO 10360-4
BS EN ISO 10360-5
BS EN ISO 10366-1
BS EN ISO 10366-2
BS EN ISO 10423
BS EN ISO 10427-1
BS EN ISO 10432
Long-Fibre-Reinforced Plastic (V)
1997 Fibre-Reinforced Plastics - Moulding
Compounds and Prepregs - Determination of
Mass per Unit Area Renumbers BS ISO
10352: 1997; (V)
2001 Geometrical Product Specifications
(GPS) - Acceptance and Reverification Tests
for Coordinate Measuring Machines (CMM)
- Part 1: Vocabulary (H)
2001 Geometrical Product Specifications
(GPS) - Acceptance and Reverification Tests
for Coordinate Measuring Machines (CMM)
- Part 3: CMMs with the Axis of a Rotary
Table as the Fourth Axis (H)
2001 Geometrical Product Specifications
(GPS) - Acceptance and Reverification Tests
for Coordinate Measuring Machine (CMM) Part 4: CMMs Used in Scanning Measuring
Mode (H)
2001 Geometrical Products Specifications
(GPS) - Acceptance and Reverification Tests
for Coordinate Measuring Machines (CMM)
- Part 5: CMMs Using Multiple-Stylus
Probing Systems (H)
1999 Amd 1 Plastics - Methyl Methacrylate/
Acrylonitrile/Butadiene/ Styrene (MABS)
Moulding and Extrusion Materials - Part 1:
Designation System and Basis for
Specifications AMD 10663; November 1999;
Renumbers the BS ISO as BS EN ISO
10366-1:1999; (V)
1999 Amd 1 Plastics - Methyl
Methacrylate/Acrylonitrile/Butadiene/Styrene
(MABS) Moulding and Extrusion Materials Part 2: Preparation of Test Specimens and
Determination of Properties AMD 10665;
November 1999; Renumbers BS ISO 103662:1994; (V)
2001 Petroleum and Natural Gas Industries Drilling and Production Equipment Wellhead and Christmas Tree Equipment (Q)
2002 Petroleum and Natural Gas Industries Casing Centralizers - Part 1: Bow-Spring
Casing Centralizers (Q)
2000 Petroleum and Natural Gas Industries Downhole Equipment - Subsurface Safety
BS EN ISO 10440-1
BS EN ISO 10441
BS EN ISO 10456
BS EN ISO 10519
BS EN ISO 10441
BS EN ISO 10504
BS EN ISO 10534-1
BS EN ISO 10545-1
BS EN ISO 10545-2
BS EN ISO 10545-3
BS EN ISO 10545-4
BS EN ISO 10545-6
BS EN ISO 10545-8
Valve Equipment (Q)
2001 Petroleum and Natural Gas Industries Rotary-Type Positive-Displacement
Compressors - Part 1: Process Compressors
(Oil-Free) (Q)
1999 Petroleum and Natural Gas Industries Flexible Couplings Mechanical Power
Transmission - Special Purpose Applications
(Q)
2000 Building Materials and Products Procedures for Determining Declared and
Design Thermal Values (R)
2001 Corr 1 Rapeseed - Determination of
Chlorophyll Content - Spectrometric Method
CORR 13102: March 2001; Renumbers BS
4289-10:1998; (W)
1999 Corr 1 Petroleum and Natural Gas
Industries - Flexible Couplings for
Mechanical Power Transmission - Special
Purpose Applications CORR 13062:February
2001; (Q)
2000 Starch Derivatives - Determination of
the Composition of Glucose Syrups, Fructose
Syrups and Hydrogenated Glucose Syrups Method Using High-Performance Liquid
Chromatography (ISO 10504:1998) (W)
2001 Acoustics - Determination of Sound
Absorption Coefficient and Impedance in
Impedance Tubes - Part 1: Method Using
Standing Wave Ratio (F)
1997 Ceramic Tiles Part 1: Sampling and
Basis for Acceptance (R)
1997 Ceramic Tiles Part 2: Determination of
Dimensions and Surface Quality (R)
1997 Ceramic Tiles Part 3: Determination of
Water Absorption, Apparent Porosity,
Apparent Relative Density and Bulk Density
(R)
1997 Ceramic Tiles Part 4: Determination of
Modulus of Rupture and Breaking Strength
(R)
1997 Ceramic Tiles Part 6: Determination of
Resistance to Deep Abration for Unglazed
Tiles (R)
1996 Ceramic Tiles Part 8: Determination of
Linear Thermal Expansion Supersedes BS
BS EN ISO 10545-9
BS EN ISO 10545-10
BS EN ISO 10545-11
BS EN ISO 10545-12
BS EN ISO 10545-13
BS EN ISO 10545-14
BS EN ISO 10545-15
BS EN ISO 10548
BS EN ISO 10555-2
BS EN ISO 10555-3
BS EN ISO 10555-4
BS EN ISO 10564
BS EN ISO 10628
BS EN ISO 10664
BS EN ISO 7437
BS EN ISO 8537
BS EN ISP 10607-1
6431: Part 15: 1983 (R)
1996 Ceramic Tiles Part 9: Determination of
Resistance to Thermal Shock Supersedes BS
6431: Part 16: 1983 (R)
1997 Ceramic Tiles Part 10: Determination
of Moisture Expansion (R)
1996 Ceramic Tiles Part 11: Determination
of Crazing Resistance for Glazed Tiles
Supersedes BS 6431: Part 17: 1983 (R)
1997 Ceramic Tiles Part 12: Determination
of Frost Resistance (R)
1997 Ceramic Tiles Part 13: Determination
of Chemical Resistance (R)
1997 Ceramic Tiles Part 14: Determination
of Resistance to Stains (R)
1997 Ceramic Tiles Part 15: Determination
of Lead and Cadmium Given off by Glazed
Tiles (R)
1996 Amd 1 Carbon Fibre - Determination of
Size Content (AMD 9223) September 15,
1996 (V)
1997 Sterile, Single-Use Intravascular
Catheters Part 2: Angiographic Catheters
Supersedes BS 7174: Part 2: 1990; (N)
1997 Sterile, Single-Use Intravascular
Catheters Part 3: Central Venous Catheters
Supersedes BS 7174: Part 3: 1990; (N)
1997 Sterile, Single-Use Intravascular
Catheters Part 4: Balloon Dilatation Catheters
Supersedes BS 7174: Part 5: 1990; (N)
1997 Soldering and Brazing Materials Methods for the Sampling of Soft Solders for
Analysis Supersedes BS 3338: Part 12: 1960;
(F)
2001 Flow Diagrams for Process Plants General Rules (Q)
1999 Hexalobular Internal Driving Feature
for Bolts and Screws (F)
1996 Technical Drawings - Construction
Drawings - General Rules for Execution of
Production Drawings for Prefabricated
Structural Components (G)
1995 Amd 2 Sterile, Single-Use Syringes,
with or without Needle, for Insulin AMD
13035; May 2001; (N)
1994 Amd 0 Information Technology -
BS EN ISP 10607-2
BS EN ISP 10607-2
BS EN ISP 10607-3
BS EN ISP 10607-4
BS EN ISP 10607-4
BS EN ISP 10607-5
BS EN ISP 10607-5
International Standardized Profiles AFTnn File Transfer, Access and Management - Part
1: Specification of ACSE, Presentation and
Session Protocols for the Use by FTAM
(AMD 8194) May 15, 1994 (Formerly BS
ISO/IEC ISP 1
1997 Information Technology - International
Standardized Profiles AFTnn - File Transfer,
Access and Management - Part 2: Definition
of Document Types, Constraint Sets and
Syntaxes (ISO/IEC ISP 10607-2: 1995) (S)
1994 Amd 0 Information Technology International Standardized Profiles AFTnn File Transfer, Access and Management - Part
2: Definition of Document Types, Constraint
Sets and Syntaxes (AMD 8195) May 15,
1994 (Formerly BS ISO/IEC ISP 10607-2:
1990 Corrig
1997 Information Technology - International
Standardized Profiles AFTnn - File Transfer,
Access and Management Part 3: AFT 11 Simple File Transfer Service (Unstructured)
(Regional Variant of ISO/IEC ISP 106073:1995) (S)
1997 Information Technology - International
Standardized Profiles AFTnn - File Transfer,
Access and Management - Part 4: AFT 12 Positional File Transfer Service (Flat)
(Regional Variant of ISO/IEC ISP 10607-4:
1995) (S)
1994 Amd 0 Information Technology International Standardized Profiles AFTnn File Transfer, Access and Management - Part
4: AFT 12 - Positional File Transfer Service
(Flat) (AMD 8197) May 15, 1994 (Formerly
BS ISO/IEC ISP 10607-4: 1991) (S)
1997 Information Technology - International
Standardized Profiles AFTnn - File Transfer,
Access and Management - Part 5: AFT 22 Positional File Access Service (Flat)
Regional Variant of ISO/IEC 10607-5:1995)
(S)
1994 Amd 0 Information Technology International Standardized Profiles AFTnn File Transfer, Access and Management - Part
5: AFT 22 - Positional File Access Service
BS EN ISP 10607-6
BS EN ISP 10607-6
BS EN ISP 10608-2
BS EN ISP 10608-4
BS EN ISO 8599
BS EN ISO 8620
BS EN ISO 8624
BS EN ISP 10608-6
BS EN ISP 10608-13
(Flat) (AMD 8198) May 15, 1994 (Formerly
BS ISO/IEC ISP 10607-5: 1991) (S)
1997 Information Technology - International
Standardized Profiles AFTnn - File Transfer,
Access and Management - Part 6: AFT3 File Management Service (ISO/IEC ISP
10607-6: 1995) (S)
1994 Amd 0 Information Technology International Standardized Profiles AFTnn File Transfer, Access and Management - Part
6: AFT 3 - File Management Transfer
Service (AMD 8199) May 15, 1994
(Formerly BS ISO/IEC ISP 10607-6: 1991)
(S)
1995 Information Technology - International
Standardized Profile TAnnnn - ConnectionMode Transport Service Over
Connectionless-Mode Network Service - Part
2: TA51 Profile Including SubnetworkDependent Requirements for CSMA/CD
Local Area Network (LANs) (
1997 Information Technology - International
Standardized Profile Tannnn - ConnectionMode Transport Service over
Connectionless-Mode Network Service Part
4: Definition of Profile TA53, Operation over
a Token Ring LAN Subnetwork (S)
1997 Optics and Optical Instruments Contact Lenses - Determination of the
Spectral and Luminous Transmittance (H)
1996 Plastics - Phenolic Resin Powder Sieve Analysis Using Air-Jet Sieve
Apparatus (Also Numbered BS 2782: Part 4:
Method 451S: 1996) (V)
1997 Optics and Optical Instruments Ophthalmic Optics - Measuring System for
Spectacle Frames Renumbers BS 3199: 1992;
(H)
1997 Information Technology - International
Standardized Profile TAnnnn - ConnectionMode Transport Service over
Connectionless-Mode Network Service Part
6: Definition of Profile TA54, Operation over
an FDDI LAN Subnetwork Renumbered as
BS ISO/IEC ISP 106
1997 Information Technology - International
BS EN ISP 10609-2
BS EN ISP 10609-3
BS EN ISP 10609-4
BS EN ISP 10609-6
BS EN ISP 10609-7
BS EN ISP 10609-8
Standardized Profile TAnnnn - ConnectionMode Transport Service over
Connectionless-Mode Network Service Part
13: MAC Sublayer and Physical Layer
Dependent Requirements for a Token Ring
LAN Subnetwork (S)
1997 Amd 1 Information Technology International Standardized Profiles TB, TC,
TD and TE - Connection-Mode Transport
Service over Connection-Mode Network
Service Part 2: Subnetwork-Type
Independent Requirements for Group TC
AMD 9470 May 1997; (S)
1997 Information Technology - International
Standardized Profiles TB, TC, TD and TE Connection-Mode Transport Service over
Connection-Mode Network Service Part 3:
Subnetwork-Type Independent Requirements
for Group TD Renumbered as BS ISO/IEC
ISP 10609-3
1997 Information Technology - International
Standardized Profiles TB, TC, TD and TE Connection-Mode Transport Service over
Connection-Mode Network Service Part 4:
Subnetwork-Type Independent Requirements
for Group TE Renumbered as BS ISO/IEC
ISP 10609-4
1997 Information Technology - International
Standardized Profiles TB, TC, TD and TE Connection-Mode Transport Service over
Connection-Mode Network Service Part 6:
Definition of Profiles TC1111/TC1121
Previously BS ISO/IEC ISP 10609-6: 1992;
(S)
1997 Information Technology - International
Standardized Profiles TB, TC, TD and TE Connection-Mode Transport Service over
Connection-Mode Network Service - Part 7:
Definition of Profiles TD1111/TD1121
Previously BS ISO/IEC ISP 10609-7: 1992;
(S)
1997 Information Technology - International
Standardized Profiles TB, TC, TD and TE Connection-Mode Transport Service over
Connection-Mode Network Service Part 8:
Definition of Profiles TE1111/TE1121
BS EN ISP 10609-10
BS EN ISP 10609-11
BS EN ISP 10609-12
BS EN ISO 8662-8
BS EN ISO 8662-9
BS EN ISO 6865
BS EN ISP 10609-14
BS EN ISP 10610-1
Previously BS ISO/IEC ISP 10609-8: 1992;
(S)
1997 Information Technology - International
Standardized Profiles TB, TC, TD and TE Connection-Mode Transport Service over
Connection-Mode Network Service Part 10:
LAN Subnetwork-Dependent, MediaIndependent Requirements Previously BS
ISO/IEC ISP 106091997 Information Technology - International
Standardized Profiles TB, TC, TD and TE Connection-Mode Transport Service over
Connection-Mode Network Service Part 11:
CSMA/CD Subnetwork-Dependent, MediaDependent Requirements Previously BS
ISO/IEC ISP 1060
1997 Information Technology - International
Standardized Profiles TB, TC, TD and TE Connection-Mode Transport Service over
Connection-Mode Network Service Part 12:
Definition of Profile TC51, Provision of the
OSI Connection-Mode Transport Service
Using
1997 Hand-Held Portable Power Tools Measurement of Vibrations at the Handle
Part 8: Polishers and Rotary, Orbital and
Random Orbital Sanders (F)
1997 Hand-Held Portable Power Tools Measurement of Vibrations at the Handle
Part 9: Rammers (F)
2001 Methods for Analysis of Animal
Feeding Stuffs - Determination of Crude
Fibre Content - Method with Intermediate
Filtration BS 5766-23: 2001; (W)
1997 Information Technology International
Standardized Profiles TB, TC, TD and TE Connection-Mode Transport Service over
Connection-Mode Network Service Part 14:
Definition of Profile TC53, Provision of the
OSI Connection-Mode Transport Service
Using th
1995 Information Technology - International
Standardized Profile FOD11 - Open
Document Format: Simple Document
Structure - Character Content Architecture
Only - Part 1: Document Application Profile
BS EN ISP 10611-1
BS EN ISP 10611-2
BS EN ISP 10611-3
BS EN ISP 10611-4
BS EN ISP 10611-5
BS EN ISP 10612-1
BS EN ISP 10612-2
BS EN ISP 10612-3
BS EN ISP 10612-4
(DAP) (Replaces DD ENV 41509: 1991 and
DD ENV 41511: 1991
1996 Information Technology - International
Standardized Profiles AMH1n - Message
Handling Systems - Common Messaging Part
1: MHS Service Support (S)
1996 Information Technology - International
Standardized Profiles AMH1n - Message
Handling Systems - Common Messaging Part
2: Specification of ROSE, RTSE, ACSE,
Presentation and Session Protocols for Use
by MHS (S)
1996 Information Technology - International
Standardized Profiles AMH1n - Message
Handling Systems - Common Messaging Part
3: AMH11 - Message Transfer (P1) (S)
1996 Information Technology - International
Standardized Profiles AMH1n - Message
Handling Systems - Common Messaging Part
4: AMH12 - MTS Access (P3) (S)
1996 Information Technology - International
Standardized Profiles AMH1n - Message
Handling Systems - Common Messaging Part
5: AMH13 - MTS Access (P7) (S)
1997 Information Technology - International
Standardized Profile RD - Relaying the MAC
Service Using Transparent Bridging Part 1:
Subnetwork-Independent Requirements
Renumbers BS ISO/IEC ISP 10612-1:1995;
(S)
1997 Information Technology - International
Standardized Profile RD - Relaying the MAC
Service Using Transparent Bridging Part 2:
CSMA/CD LAN Subnetwork-Dependent,
Media-Dependent Requirements Renumbers
BS ISO/IEC ISP 10612-2:1995; (S)
1997 Amd 1 Information Technology International Standardized Profile RD Relaying the MAC Service Using
Transparent Bridging Part 3: Token Ring
LAN Subnetwork-Dependent, MediaDependent Requirements AMD 9559; July
2,1997; Renumbers BS ISO/IEC ISP 10612
1997 Amd 1 Information Technology International Standardized Profile RD Relaying the MAC Service Using
BS EN ISP 10612-5
BS EN ISP 10612-6
BS EN ISO 6867
BS EN ISO 6871-1
BS EN ISO 6871-2
BS EN ISP 10612-7
BS EN ISP 10612-8
BS EN ISP 10612-9
BS EN ISO 7391-2
Transparent Bridging Part 4: Profile RD51.51
(CSMA/CD LAN - CSMA/CD LAN) AMD
9560; July 2,1997; Renumbers BS ISO/IEC
ISP 10612-4:1995; (S)
1997 Information Technology - International
Standardized Profile RD - Relaying the MAC
Service Using Transparent Bridging Part 5.
Profile RD51.54 (CSMA/CD LAN - FDDI
LAN) Renumbers BS ISO/IEC ISP 106125:1995 (S)
1997 Information Technology - International
Standardized Profile RD - Relaying the MAC
Service Using Transparent Bridging - Part 6:
Profile RD54.54 (FDDI LAN - FDDI LAN)
Renumbers BS ISO/IEC ISP 10612-6:1995
(S)
2001 Animal Feeding Stuffs - Determination
of Vitamin E Content - Method Using HighPerformance Liquid Chromatography BS
5766-24: 2001; (W)
1997 Dental Base Metal Casting Alloys Part
1: Cobalt-Based Alloys Supersedes BS 3366:
Part 1: 1988 and Part 2: 1976; (N)
1997 Dental Base Metal Casting Alloys Part
2: Nickel-Based Alloys Supersedes BS 3366:
Part 1: 1988 and Part 2: 1976; (N)
1997 Information Technology - International
Standardized Profile RD - Relaying the MAC
Service Using Transparent Bridging Part 7:
Profile RD51.53 (CSMA/CD LAN - Token
Ring LAN) Renumbers BS ISO/IEC ISP
10612-7:1995 (S)
1997 Information Technology - International
Standardized Profile RD - Relaying the MAC
Service Using Transparent Bridging Part 8:
Profile RD53.53 (Token Ring LAN - Token
Ring LAN) Renumbers BS ISO/IEC ISP
10612-8:1995 (S)
1997 Information Technology - International
Standardized Profile RD - Relaying the MAC
Service Using Transparent Bridging Part 9:
Profile RD53.54 (Token Ring LAN - FDDI
LAN) Renumbers BS ISO/IEC ISP 106129:1995 (S)
2000 Plastics - Polycarbonate (PC) Moulding
and Extrusion Materials - Part 2: Preparation
BS EN ISO 7393-1
BS EN ISO 7393-2
BS EN ISO 7393-3
BS EN ISO 7405
BS EN ISO/ IEC 7487-1
BS EN ISO/ IEC 7498-1
BS EN ISO 7500-2
BS EN ISO 8580
BS EN ISO 8662-7
of Test Specimens and Determination of
Properties Renumbers BS ISO 7391-2:1996;
(V)
2000 Water Quality - Determination of Free
Chlorine and Total Chlorine - Part 1:
Titrimetric Method Using N,N-Diethyl-1,4Phenylenediamine Renumbers BS 6068-2.25:
1986; (N)
2000 Water Quality - Determination of Free
Chlorine and Total Chlorine - Part 2:
Calorimetric Method Using N,N-Diethyl-1,4Phenylenediamine, for Routine Control
Purposes Renumbers BS 6068-2.26: 1986;
(N)
2000 Water Quality - Determination of Free
Chlorine and Total Chlorine - Part 3:
Iodometric Titration Method for the
Determination of Total Chlorine Renumbers
BS 6068-2.27: 1990; (N)
1997 Dentistry - Preclinical Evaluation of
Biocompatibility of Medical Devices Used in
Dentistry - Test Methods for Dental
Materials Supersedes BS 5828: 1989; (N)
1995 Information Technology - Data
Interchange on 130 mm (5,25 in) Flexible
Disk Cartridges Using Modified Frequency
Modulation Recording at 7958 ftprad, 1,9
tpmm (48 tpi), on Both Sides - ISO type 202
Part 1: Dimensional, Physical and Magnetic
Characteri
1995 Information Technology - Open
Systems Interconnection - Basic Reference
Model: The Basic Model (ISO/IEC 7498-1:
1994) (Replaces BS 6568: Part 1: 1988) (S)
1999 Metallic Materials - Verification of
Static Uniaxial Testing Machines - Part 2:
Tension Creep Testing Machines Verification of the Applied Load Supersedes
BS 1610-3: 1990; (V)
1995 Amd 1 Rubber and Plastics Hoses Determination of Ultra-Violet Resistance
Under Static Conditions (AMD 8665) July
15, 1995 (Formerly BS 5173: Part 106: Sec
106.4: 1989 Replaces BS 5173: Pt 6: 1977)
(E)
1997 Hand-Held Portable Power Tools -
BS EN ISO 8662-12
BS EN ISO 6721-3
BS EN ISO 6806
BS EN ISO 6808
BS EN ISO 8780-1
BS EN ISO 6860
BS EN ISO 6869
BS EN ISO 6885
BS EN ISO 6887-1
BS EN ISO 6888-1
Measurement of Vibrations at the Handle
Part 7 : Wrenches, Screwdrivers and Nut
Runners with Impact, Impulse or Ratchet
Action (F)
1997 Hand-Held Portable Power Tools Measurement of Vibrations at the Handle
Part 12: Saws and Files with Reciprocating
Action and Saws with Rotating or Oscillating
Action (F)
1996 Plastics - Determination of Dynamic
Mechanical Properties Part 3: Flexural
Vibration - Resonance-Curve Method (V)
1996 Rubber Hoses and Hose Assemblies for
Use in Oil Burners - Specification (E)
2001 Plastic Hoses and Hose Assemblies for
Suction and Low-Pressure Discharge of
Petroleum Liquids - Specification Supersedes
BS 6847:1987; (E)
1995 Amd 1 Pigments and Extenders Methods of Dispersion for Assessment of
Dispersion Characteristics Part 1:
Introduction (AMD 8533) August 15, 1995
(Formerly BS 3483: Part D1: 1991) (W)
1995 Amd 1 Paints and Varnishes - Bend
Test (Conical Mandrel) (AMD 8612)
September 15, 1995 (See BS EN ISO 1519.
Also Numbered BS 3900: Part E11: 1985)
(W)
2001 Animal Feeding Stuffs - Determination
of the Contents of Calcium, Copper, Iron,
Magnesium, Manganese, Potassium, Sodium
and Zinc - Method Using Atomic Absorption
Spectrometry BS 5766-25: 2001; (W)
2001 Corr 1 Animal and Vegetable Fats and
Oils - Determination of Ansidine Value
CORR 13315; September 2001; Renumbers
BS 684-2.24: 1998; (W)
1999 Microbiology of Food and Animal
Feeding Stuffs - Preparation of Test Samples,
Initial Suspension and Decimal Dilutions for
Microbiological Examination - Part 1:
General Rules for the Preparation of the
Initial Suspension and Decimal Dilutions
Superse
1999 Microbiology of Food and Animal
Feeding Stuffs - Horizontal Method for the
BS EN ISO 6888-2
BS EN ISO 6940
BS EN ISO 6941
BS EN ISO 7027
BS EN ISO 7092
BS EN ISO 7093-1
BS EN ISO 6945
BS EN ISO 6945
BS EN ISO 3411
BS EN ISO 3451-1
BS EN ISO 3451-4
BS EN ISO 3451 PART 4
Enumeration of Coagulase-Positive
Staphylococci (Staphylococcus Aureus and
other Species) - Part 1: Technique Using
Baird-Parker Agar Medium Together with
Part 2, It Supersede
1999 Microbiology of Food and Animal
Feeding Stuffs - Horizontal Method for the
Enumeration of Coagulase-Positive
Staphylococci (Staphylococcus Aureus and
other Species) - Part 2: Technique Using
Rabbit Plasma Fibrinogen Agar Medium
Together with Part 1,
1995 Textile Fabrics - Burning Behaviour Determination of Ease of Ignition of
Vertically Oriented Specimens (Partially
Replaces BS 5438: 1989) (L)
1995 Textile Fabrics - Burning Behaviour Measurement of Flame Spread Properties of
Vertically Oriented Specimens (L)
2000 Water Quality - Determination of
Turbidity Supersedes BS EN 27027:1994;
(N)
2000 Plain Washers - Small Series - Product
Grade A (E)
2000 Plain Washers - Large Series - Part 1:
Product Grade A (E)
1996 Rubber Hoses - Determination of
Abrasion Resistance of the Outer Cover (E)
1996 Amd 1 Rubber Hoses - Determination
of Abrasion Resistance of the Outer Cover
AMD 10939:April 2001; Supersedes BS
5173-103.9:1986; (E)
2000 Earth-Moving Machinery - Human
Physical Dimensions of Operators and
Minimum Operator Space Envelope Also
Known as BS 6912-28:2000; Supersedes BS
5538: 1983; (R)
1997 Plastics - Determination of Ash part 1:
General Methods Also Numbered as BS
2782: Part 4: Method 470A: 1997;
Supersedes BS 2782: Part 4: Method 470A:
1991; (V)
2000 Plastics - Determination of Ash - Part 4:
Polyamides Supersedes BS EN ISO 3451-4:
1996, Which is Withdrawn; (V)
1996 Amd 1 Plastics - Determination of Ash
BS EN ISO 3451-5
BS EN ISO 3452-2
BS EN ISO 3521
BS EN ISO 3596
BS EN ISO 3596
BS EN ISO 801-3
BS EN ISO 846
BS EN ISO 862
BS EN ISO 877
BS EN ISO 887
BS EN ISO 898-1
BS EN 61557-4
Part 4: Polyamides (AMD 9149) July 15,
1996 (V)
1997 Plastics - Determination of Ash Part 5:
Poly(Vinyl Chloride) Renumberes BS 2782:
Part 4: Method 470E: 1991; (V)
2000 Non-Destructive Testing - Penetrant
Testing - Part 2: Testing of Penetrant
Materials (F)
2000 Plastics - Unsaturated Polyester and
Epoxy Resins - Determination of Overall
Volume Shrinkage Renumbers BS 2782-6:
Method 644A: 1997; Supersedes BS 2782-6:
Method 644A: 1979; ISO 3521: 1997; (V)
2001 Corr 1 Animal and Vegetable Fats and
Oils - Determination of Unsaponifiable
Matter - Method Using Diethyl Ether
Extraction CORR: 13636: January 23, 2002;
Supersedes BS EN ISO 3596-1:2000; BS
684-2.7: 2001; (W)
2001 Animal and Vegetable Fats and Oils Determination of Unsaponifiable Matter Method Using Diethyl Ether Extraction
Supersedes BS EN ISO 3596-1:2000
1997 Amd 1 Pulps - Determination of
Saleable Mass in Lots Part 3: Unitized Bales
AMD 9411 March 15, 1997; Renumbering
BS 4747 : Part 3 : 1995; (H)
1997 Plastics - Evaluation of the Action of
Microorganisms (V)
1995 Amd 2 Glossary of Terms for Surface
Active Agents (AMD 8572) December 15,
1995 (Formerly BS 7498: 1991) (W)
1997 Plastics - Methods of Exposure to
Direct Weathering, to Weathering Using
Glass-Filtered Daylight, and to Intensified
Weathering by Daylight Using Fresnel
Mirrors Renumbers BS 2782: Method 550B:
1996; (V)
2000 Plain Washers for Metric Bolts, Screws
and Nuts for General Purposes - General Plan
(E)
1999 Mechanical Properties of Fasteners
Made of Carbon Steel and Alloy Steel - Part
1: Bolts, Screws and Studs Supersedes BS
EN 20898-1: 1992; (E)
1997 Electrical Safety in Low Voltage
BS EN 61599
BS EN 61701
BS EN 61702
BS EN 61557-5
BS EN 61557-7
BS EN 61557-8
BS EN 60619
BS EN 60627
BS EN 60630
BS EN 60630
BS EN 61557-9
Distribution Systems up to 1000 V a.c. and
1500 V d.c. - Equipment for Testing,
Measuring or Monitoring of Protective
Measures Part 4: Resistance of Earth
Connection and Equipotential Bonding IEC
61557-4: 1997; (E)
2000 Videodisk Players - Methods of
Measurement IEC 61599: 1999; (S)
2000 Salt Mist Corrosion Testing of
Photovoltaic (PV) Modules IEC 61701:
1995; (F)
2000 Rating of Direct Coupled Photovoltaic
(PV) Pumping Systems IEC 61702:1995; (Q)
1997 Electrical Safety in Low Voltage
Distribution Systems up to 1000 V a.c. and
1500 V d.c. - Equipment for Testing,
Measuring or Monitoring of Protective
Measures Part 5: Resistance to Earth IEC
61557-5: 1997; (E)
1997 Electrical Safety in Low Voltage
Distribution Systems up to 1000 V a.c. and
1500 V d.c. - Equipment for Testing,
Measuring or Monitoring of Protective
Measures Part 7: Phase Sequence IEC 6155757: 1997; (E)
1997 Electrical Safety in Low Voltage
Distribution Systems up to 1000 V a.c. and
1500 V d.c. - Equipment for Testing,
Measuring or Monitoring of Protective
Measures Part 8: Insulation Monitoring
Devices for IT Systems IEC 1557-8: 1997;
(E)
1993 Amd 1 Electrically Operated Food
Preparation Appliances - Methods for
Measuring the Performance (IEC 619: 1993)
(AMD 9016) August 15, 1996 (L)
2001 Diagonstic X-Ray Imaging Equipment Characteristics of General Purpose and
Mammographic Anti-Scatter Grids IEC
60627:2001; Supersedes BS 5913:1980; (N)
1999 Maximum Lamp Outlines for
Incandescent Lamps (E)
1999 Amd 1 Maximum Lamp Outlines for
Incandescent Lamps AMD 10733: January
2000; (E)
2000 Electrical Safety in Low Voltage
BS EN 60644
BS EN 60645-2
BS EN 60660
BS EN 60661
BS EN 60662
BS EN 60662
BS EN 60662
BS EN 60662
BS EN 61298-1
BS EN 61298-2
BS EN 61298-4
Distribution Systems up to 1 kV a.c. and 1,5
kV d.c. - Equipment for Testing, Measuring
or Monitoring of Protective Measures - Part
9: Equipment for Insulation Fault Location in
IT Systems IEC 611557-9: 1999; (E)
1993 Amd 2 High Voltage Fuse-Links for
Motor Circuit Applications (IEC 644: 1979)
(AMD 8019) November 15, 1993 (Formerly
BS 5907: 1980) (E)
1997 Audiometers Part 2: Equipment for
Speech Audiometry IEC 60645-2: 1993; (S)
2000 Insulators - Tests on Indoor Post
Insulators of Organic Material for Systems
with Nominal Voltages Greater Than 1 kV up
to but Not Including 300 kV IEC
60660:1999; (E)
2001 Methods of Measuring the Performance
of Electric Household Coffee Makers IEC
60661:1999; (L)
1993 High-Pressure Sodium Vapour Lamps
Replaces BS 6193: 1990; Partially
Superseded by BS EN 62035: 2000
1993 Amd 1 High-Pressure Sodium Vapour
Lamps AMD 8348; October 15, 1994;
Replaces BS 6193: 1990; Superseded by BS
EN 62035: 2000; (E)
1993 Amd 3 High-Pressure Sodium Vapour
Lamps AMD 8571; November 15, 1995;
Superseded by BS EN 62035: 2000; (E)
1993 Amd 4 High-Pressure Sodium Vapour
Lamps AMD 9150; December 1996;
Superseded by BS EN 62035: 2000; (E)
1996 Process Measurement and Control
Devices - General Methods and Procedures
for Evaluating Performance Part 1: General
Considerations (IEC 1298-1: 1995) (Q)
1996 Process Measurement and Control
Devices - General Methods and Procedures
for Evaluating Performance Part 2: Tests
Under Reference Conditions (IEC 1298-2:
1995) (Q)
1996 Process Measurement and Control
Devices - General Methods and Procedures
for Evaluating Performance Part 4:
Evaluation Report Content (IEC 1298-4:
1995) (Q)
BS EN 61300-1
BS EN 61300-2-1
BS EN 61300-2-2
BS EN 61300-2-3
BS EN 61300-2-4
BS EN 60966-1
BS EN 60966-2-1
BS EN 60966-2-2
BS EN 61300-2-5
BS EN 60966-2-3
BS EN 60966-2-5
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 1: General and
Guidance IEC 61300-1: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures - Part 2-1: Tests Vibration (Sinusoidal) IEC 61300-2-1: 1995;
(S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2-2: Tests Mating Durability IEC 61300-2-2: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2-3: Tests Static Shear Load IEC 61300-2-3: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2-4: Tests Fibre/Cable Retention IEC 61300-2-4: 1995;
(S)
1999 Radio Frequency and Coaxial Cable
Assemblies - Part 1: Generic Specification General Requirements and Test Methods IEC
60996-1: 1999; (S)
1996 Radio Frequency and Coaxial Cable
Assemblies Part 2-1: Sectional Specification
for Flexible Coaxial Cable Assemblies (IEC
966-2-1: 1991) (S)
1996 Radio Frequency and Coaxial Cable
Assemblies Part 2-2: Blank Detail
Specification for Flexible Coaxial Cable
Assemblies (IEC 966-2-2: 1992) (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2-5: Tests Torsion/Twist IEC 61300-2-5: 1995; (S)
1999 Radio Frequency and Coaxial Cable
Assemblies - Part 2-3: Detail Specification
for Flexible Coaxial Cable Assemblies IEC
60966-2-3: 1996; (S)
1999 Radio Frequency and Coaxial Cable
Assemblies - Part 2-5: Detail Specification
for Cable Assemblies for TV and Radio
Receivers - Frequency Range 0 to 1 000
BS EN 60966-2-6
BS EN 60966-3
BS EN 60966-3-1
BS EN 60966-3-2
BS EN 60966-4
BS EN 60454-3-14
BS EN 60455-2
BS EN 60455-3-5
BS EN 60464-2
BS EN 60464-3-1
MHz, IEC 60169-2 Connectors IEC 60966-25: 1998; (S)
1999 Radio Frequency and Coaxial Cable
Assemblies - Part 2-6: Detail Specification
for Cable Assemblies for TV and Radio
Receivers - Frequency Range 0 to 3 000
MHz, IEC 60169-24 Connectors IEC 609662-6: 1998; (S)
1996 Radio Frequency and Coaxial Cable
Assemblies Part 3: Sectional Specification
for Semi-Flexible Coaxial Cable Assemblies
(IEC 966-3: 1992) (S)
1996 Radio Frequency and Coaxial Cable
Assemblies Part 3-1: Blank Detail
Specification for Semi-Flexible Coaxial
Cable Assemblies (IEC 966-3-1: 1992) (S)
1999 Radio Frequency and Coaxial Cable
Assemblies - Part 3-2: Detail Specification
for Flexible Coaxial Cable Assemblies for
GSM Use (0,8 GHz - 1 GHz) IEC 60966-3-2:
1996; (S)
1996 Radio Frequency and Coaxial Cable
Assemblies Part 4: Sectional Specification
for Semi-Rigid Coaxial Cable Assemblies
(IEC 966-4: 1992) (S)
2002 Pressure-Sensitive Adhesive Tapes for
Electrical Purposes - Part 3: Specifications
for Individual Materials - Sheet 14:
Polytetrafluoroethylene Film Tapes with
Pressure-Sensitive Adhesive IEC 60454-317: 2001; (F)
1999 Resin Based Reactive Compounds Used
for Electrical Insulation - Part 2: Methods of
Test Supersedes BS 5664: Part 2.1: 1979;
IEC 60455-2: 1998; (E)
2002 Resin Based Reactive Compounds Used
for Electrical Insulation - Part 3:
Specifications for Individual Materials Sheet 5: Unsaturataed Polyester Based
Impregnating Resins IEC 60455-3-5: 2001;
(E)
2001 Varnishes Used for Electrical Insulation
- Part 2: Methods of Test Supersedes BS
5629-2: 1979; IEC 60464-2: 2001; (F)
2002 Varnishes Used for Electrical Insulation
- Part 3: Specifications for Individual
BS EN 60477-2
BS EN 60491
BS EN 60505
BS EN ISO 7579
BS EN ISO 7590
BS EN ISO 7623
BS EN ISO 8330
BS EN 60510-2-5
BS EN 60510-2-6
BS EN 60068-2-39
BS EN 60068-2-40
BS EN 60068-2-41
Materials - Sheet 1: Ambient Curing
Finishing Varnishes IEC 60464-3-1:2001; (F)
1999 Laboratory Resistors - Part 2:
Laboratory a.c. Resistors Renumbers BS
6011: 1980; (H)
1997 Safety Requirements for Electronic
Flash Apparatus for Photographic Purposes
(H)
2000 Evaluation and Qualification of
Electrical Insulation Systems IEC 60505:
1999; (E)
1997 Dyestuffs - Determination of Solubility
in Organic Solvents - Gravimetric Method
Renumberes BS 3483: Part B11: 1991; (W)
2001 Steel Cord Conveyor Belts - Methods
for the Determination of Total Thickness and
Cover Thickness (Q)
1997 Steel Cord Conveyor Belts - Cord-ToCoating Bond Test - Initial Test After
Thermal Treatment Renumbers BS ISO
7623: 1996; (Q)
2000 Rubber and Plastics Hoses and Hose
Assemblies - Vocabulary (G)
1996 Methods of Measurement for Radio
Equipment Used in Satellite Earth Stations
Part 2: Measurements for Sub-Systems
Section 2.5: Frequency Modulators (IEC
510-2-5: 1992) (S)
1996 Methods of Measurement for Radio
Equipment Used in Satellite Earth Stations
Part 2: Measurements for Sub-Systems
Section 2.6: Frequency Demodulators (IEC
510-2-6: 1992) (S)
1999 Environmental Testing - Part 2: Tests Test Z/AMD: Combined Sequential Cold,
Low Air Pressure and Damp Heat Test
Supersedes BS 2011-2.1 Z/AMD: 1977; IEC
60068-2-39: 1976; (G)
2000 Environmental Testing - Part 2: Tests Test Z/AM: Combined Cold/Low Air
Pressure Tests Supersedes BS 20112.1Z/AM:1977; IEC 60068-2-40:1976; (G)
2000 Environmental Testing - Part 2: Tests Test Z/BM: Combined Dry Heat/Low Air
Pressure Tests Supersedes BS 20112.1Z/BM: 1977; IEC 60068-2-41: 1976; (G)
BS EN 60068-2-45
BS EN 60068-2-47
BS EN 60068-2-47
BS EN 60068-2-48
BS EN 60068-2-50
BS EN ISP 10613-2
BS EN ISP 10613-3
BS EN ISP 10613-4
1993 Amd 1 Environmental Testing Part 2.1:
Tests Test XA and Guidance. Immersion in
Cleaning Solvents (IEC 68-2-45: 1980)
(AMD 8014) November 15, 1993 (Formerly
BS 2011: Part 2.1XA: 1981) (G)
2000 Environmental Testing - Part 2-47: Test
Methods - Mounting of Components,
Equipment and Other Articles for Vibration,
Impact and Similar Dynamic Tests IEC
60068-2-47:1999, Supersedes BS EN 600682-47:1993 (G)
1993 Environmental Testing Part 2: Tests
Mounting of Components, Equipment and
Other Articles for Dynamic Tests Including
Shock (Ea), Bump (Eb), Vibration (Fc and
Fd) and Steady-State Acceleration (Ga) and
Guidance (IEC 68-2-47: 1982) (Formerly BS
2011: S
2000 Environmental Testing - Part 2: Tests Guidance on the Application of the Tests of
IEC 60068 to Simulate the Effects of Storage
Supersedes BS 2011-4.2: 1984; IEC 600682-48: 1982; (G)
2000 Environmental Testing - Part 2: Tests Tests Z/AFc: Combined Cold/Vibration
(Sinusoidal) Tests for Both Heat-Dissipating
and Non-Heat Dissipating Specimens IEC
60068-2-50:1983; Supersedes BS 20112.1Z/AFc:1984; (G)
1997 Amd 1 Information Technology International Standardized Profile RA Relaying the Connectionless-Mode Network
Service - Part 2: LAN SubnetworkDependent, Media-Independent
Requirements Supersedes DD ENV 41801-2:
1992; Renumbers BS ISO/IEC ISP 10613
1997 Amd 1 Information Technology International Standardized Profile RA Relaying the Connectionless-Mode Network
Service - Part 3: CSMA/CD LAN
Subnetwork-Dependent, Media-Dependent
Requirements AMD 9566; September 1997;
Supersedes DD ENV 41801-3: 1992
1997 Information Technology - International
Standardized Profile RA - Relaying the
Connectionless-Mode Network Service Part
BS EN ISO 8536-1
BS EN ISO 7662
BS EN ISO 7730
BS EN ISO 7751
BS EN ISP 10613-5
BS EN ISP 10613-6
BS EN ISP 10613-8
BS EN ISO 7539-3
BS EN ISO 7539-4
4: FDDI LAN Subnetwork-Dependent,
Media-Dependent Requirements Renumbers
BS ISO/IEC ISP 10613-4: 1995; (S)
1999 Infusion Equipment for Medical Use Part 1: Infusion Glass Bottles (N)
1996 Rubber and Plastics Hoses Determination of Abrasion of Lining (E)
1995 Moderate Thermal Environments Determination of the PMV and PPD Indices
and Specification of the Conditions for
Thermal Comfort (N)
1997 Rubber and Plastics Hoses and Hose
Assemblies - Ratios of Proof and Burst
Pressure to Design Working Pressure
Supersedes BS 6596: 1992; (E)
1997 Amd 1 Information Technology International Standardized Profile RA Relaying the Connectionless-Mode Network
Service - Part 5: Definition of Profile
RA51.51, Relaying the Connectionless-Mode
Network Service between CSMA/CD LAN
Subnetworks Supersed
1997 Information Technology - International
Standardized Profile RA - Relaying the
Connectionless-Mode Network Service Part
6: Definition of Profile RA51.54, Relaying
the Connectionless-Mode Network Service
between CSMA/CD LAN Subnetworks and
FDDI LAN Sub
1997 Information Technology - International
Standardized Profile RA - Relaying the
Connectionless-Mode Network Service Part
8: Definition of Profile RA51.1111, Relaying
the Connectionless-Mode Network Service
between CSMA/CD LAN Subnetworks and
PSDNs Usin
1995 Amd 1 Corrosion of Metals and Alloys
- Stress Corrosion Testing Part 3: Preparation
and Use of U-Bend Specimens (AMD 8712)
October 15, 1994 (Formerly BS 6980: Part 3:
1990) (V)
1995 Amd 1 Corrosion of Metals and Alloys
- Stress Corrosion Testing Part 4: Preparation
and Use of Uniaxially Loaded Tension
Specimens (AMD 8713) October 15, 1995
(Formerly BS 6980: Part 4: 1990) (V)
BS EN ISO 7539-5
BS EN ISO 7539-6
BS EN ISO 7539-7
BS EN ISO 7726
BS EN ISO 7730
BS EN ISO 7779
BS EN ISO 7783-1
BS EN ISO 7783-2
BS EN ISO 7785-1
BS EN ISO 7786
1995 Amd 1 Corrosion of Metals and Alloys
- Stress Corrosion Testing Part 5: Preparation
and Use of C-Ring Specimens (AMD 8716)
October 15, 1995 (Formerly BS 6980: Part 5:
1990) (V)
1995 Amd 1 Corrosion of Metals and Alloys
- Stress Corrosion Testing Part 6: Preparation
and Use of Pre-Cracked Specimens (AMD
8734) August 15, 1995 (Formerly BS 6980:
Part 6: 1990) (V)
1995 Amd 1 Corrosion of Metals and Alloys
- Stress Corrosion Testing Part 7: Slow Strain
Rate Testing (AMD 8733) August 15, 1995
(V) (Previously Known as BS 6980: PT 7:
1990)
2001 Corr 1 Ergonomics of the Thermal
Environment - Instruments for Measuring
Physical Quantities CORR 13697:February
20, 2002; Supersedes BS EN 27726:1994;
(H)
1995 Amd 1 Moderate Thermal
Environments - Determination of the PMV
and PPD Indices and Specification of the
Conditions for Thermal Comfort (AMD
9036) June 15, 1996 (N)
2001 Acoustics - Measurement of Airborne
Noise Emitted by Information Technology
and Telecommunications Equipment
Supersedes BS 7135-1:1989; ISO 7779:1999;
(S)
2000 Methods of Test for Paints - Part 1:
Determination of Water-Vapour
Transmission Rate of Free Films (Dish
Method) Also Known as BS 3900-G9: 1996;
(W)
1999 Paints and Varnishes - Coating
Materials and Coating Systems for Exterior
Masonary and Concrete - Part 2:
Determination and Classification of WaterVapour Transmission Rate (Permeability)
(W)
1999 Dental Handpieces - Part 1: High-Speed
Air Turbine Handpieces Supersedes BS EN
27785-1: 1994; ISO 7785-1: 1997; (N)
2001 Dental Rotary Instruments - Laboratory
Abrasive Instruments Supersedes BS EN
BS EN ISO 7786
BS EN ISO 7799
BS EN ISO 7808
BS EN ISO/IEC 7810
BS EN ISO/IEC 7811-1
BS EN ISO/IEC 7811-2
BS EN ISO/IEC 7811-3
BS EN ISO/IEC 7811-4
BS EN ISO/IEC 7811-5
BS EN ISO/ IEC 7816-5
BS EN ISO 7822
BS EN ISO 7823-1
BS EN ISO 7823-1
BS EN ISO 7823-2
BS EN ISO 7837
27786:1992; (N)
2001 Corr 1 Dental Rotary Instruments Laboratory Abrasive Instruments CORR
13334:July 2001; Supersedes BS EN
27786:1992; (N)
2000 Metallic Materials - Sheet and Strip 3
mm Thick or Less - Reverse Bend Test (V)
1999 Plastics - Thermosetting Moulding
Materials - Determination of Transfer Flow
Renumbers BS 2782: Part 7: Method 722A:
1993; (V)
1996 Identification Cards - Physical
Characteristics (S)
1996 Identification Cards - Recording
Technique; Part 1: Embossing (S)
1996 Identification Cards - Recording
Technique; Part 2: Magnetic Stripe (S)
1996 Identification Cards - Recording
Technique; Part 3: Location of Embossed
Characters on ID-1 Cards (S)
1996 Identification Cards - Recording
Techniques - Part 4: Location of Read-Only
Magnetic Tracks - Tracks 1 and 2 (S)
1996 Identification Cards - Recording
Technique; Part 5: Location of Read-Write
Magnetic Track - Track 3 (S)
1996 Identification Cards - Integrated
Circuit(s) Cards with Contacts Part 5:
Numbering System and Registration
Procedure for Application Identifiers (S)
1999 Textile Glass Reinforced Plastics Determination of Void Content - Loss on
Ignition, Mechanical Disintegration and
Statistical Counting Methods (V)
2000 Plastics - Poly(Methyl Methacrylate)
Sheets - Types, Dimensions and
Characteristics - Part 1: Cast Sheets (V)
1996 Poly (Methyl Methacrylate) Sheets Types, Dimensions and Characteristics Part
1: Cast Sheets (V)
1997 Plastics Poly(Methyl Methacrylate)
Sheets - Types, Dimensions and
Characteristics Part 2: Melt-Calendered
Extruded Sheets (V)
2001 Fertilizers - Determination of Bulk
Density (Loose) of Fine-Grained Fertilizers
BS EN ISO 7854
BS EN ISO 7886-1
BS EN ISO 7886-2
BS EN ISO 7899-1
BS EN ISO 7899-1
BS EN ISO 7899-2
BS EN ISO 7965-2
BS EN ISO 7980
BS EN ISO 8031
BS EN ISO 8359
Renumbers BS 5551-3.3:1992; (W)
1997 Rubber- or Plastics-Coated Fabrics Determination of Resistance to Damage by
Flexing Supersedes and Renumbers BS 3424:
PT 9: 1996; (L)
1997 Sterile Hypodermic Syringes for Single
Use Part 1: Syringes for Manual Use
Supersedes BS 5081: PT 1: 1994; (N)
1997 Sterile Hypodermic Syringes for Single
Use Part 2: Syringes for Use with PowerDriven Syringe Pumps Renumbers BS ISO
7886-2: 1996; (N)
1999 Water Quality - Detection and
Enumeration of Intestinal Enterococci in
Surface and Waste Water - Part 1:
Miniaturized Method (Most Probable
Number) by Inoculation in Liquid Medium
Also Numbered as BS 6068-4.3: 1999;
Supersedes BS 6068-4.3: 1989; (N)
1999 Corr 1 Water Quality - Detection and
Enumeration of Intestinal Enterococci - Part
1: Miniaturized Method (Most Probable
Number) for Surface and Waste Water
CORR 13020:June 2001; Also Numbered as
BS 6068-4.3: 1999; Supersedes BS 6068-4.3:
1989; (N)
2000 Water Quality - Detection and
Enumeration of Intestinal Enterococci - Part
2: Membrane Filtration Method Also
Numbered as BS 6068-4.4: 2000; Supersedes
BS 6068-4.4: 1989; (N)
1997 Sacks - Drop Test Part 2: Sacks Made
from the Thermoplastic Flexible Film
Renumberes BS ISO 7965-2: 1993; (H)
2000 Water Quality - Determination of
Magnesium - Atomic Absorption
Spectrometric Method Also Known as BS
6068-2.30: 1987; (N)
1997 Rubber and Plastics Hoses and Hose
Assemblies - Determination of Electrical
Resistance Supersedes BS EN 28031: 1993;
(E)
1997 Medical Electrical Equipment - Oxygen
Concentrators for Medical Use - Safety
Requirements Also Numbered as BS 5724:
Section 2.23: 1997; Supersedes BS 5724:
BS EN ISO 8367-1
BS EN ISO 8367-2
BS EN ISO 8381
BS EN ISO 8384
BS EN ISO 8384
BS EN ISO 8401
BS EN ISO 8420
BS EN ISO 8429
BS EN ISO 8434-4
BS EN ISO 8497
BS EN ISO 8536-2
BS EN ISO 8536-2
Section 2.23: 1989; (N)
1997 Amd 1 Packaging - Dimensional
Tolerances for General Purpose Sacks Part 1:
Paper Sacks AMD 9396 March 15, 1997;
Renumbering BS ISO 8367-1 : 1993; (H)
1997 Amd 1 Packaging - Dimensional
Tolerances for General Purpose Sacks Part 2:
Sacks Made from Thermoplastic Flexible
Film AMD 9397 March 15, 1997;
Renumbering BS ISO 8367-2 : 1993; (H)
2000 Milk Based Infant Foods Determination of Fat Content - Gravimetric
Method (Reference Method) Also Known as
BS 7142-1:2000; (W)
2001 Ships and Marine Technology Dredgers - Vocabulary Supersedes BS
7473:1991; (Q)
2001 Corr 1 Ships and Marine Technology Dredgers - Vocabulary CORR
13356:September 2001; Supersedes BS
7473:1991; (Q)
1995 Amd 1 Metallic Coatings - Review of
Methods of Measurement of Ductility (AMD
8500) April 15, 1995 (Formerly BS 5411:
Part 15: 1988) (F)
1995 Amd 1 Animal and Vegetable Fats and
Oils - Determination of Polar Compounds
Content (AMD 8673) July 15, 1995 (Also
Numbered BS 684: Section 2.45: 1991) (W)
1997 Optics and Optical Instruments Ophthalmology - Graduated Dial Scale
Renumbers BS 6903: 1987; (H)
2000 Metallic Tube Connections for Fluid
Power and General Use - Part 4: 24 Degree
Cone Connectors with O-Ring Weld-on
Nipples Renumbers BS ISO 8434-4:1995;
(E)
1997 Thermal Insulation - Determination of
Steady-State Thermal Transmission
Properties of Thermal Insulation for Circular
Pipes (R)
1999 Infusion Equipment for Medical Use Part 2: Closures for Infusion Bottles (N)
1999 Corr 1 Infusion Equipment for Medical
Use - Part 2: Closures for Infusion Bottles
CORR 10828; April 2000; (N)
BS EN ISO 8442-6
BS EN ISO 8442-7
BS EN ISO 8442-8
BS EN ISO 8502-2
BS EN ISO 8502-3
BS EN ISO 8502-4
BS EN ISO 8502-6
BS EN ISO 8502-9
BS EN ISO 8503-1
2001 Materials and Articles in Contact with
foodstuffs - Cutlery and Table Holloware Part 6: Lightly Silver Plated Table Holloware
Protected by Laquer (L)
2001 Materials and Articles in Contact with
Foodstuffs - Cutlery and Table Holloware Part 7: Requirements for Table Cutlery Made
of Silver,Other Precious Metals and Their
Alloys (L)
2001 Materials and Articles in Contact with
Foodstuffs - Cutlery and Table Holloware Part 8: Requirements for Silver Table and
Decorative Holloware (L)
2000 Amd 1 Preparation of Steel Substrates
Before Application of Paints and Related
Products Test for the Assessment of Surface
Cleanliness Part 2: Laboratory Determination
of Chloride on Cleaned Surface (V)
2000 Preparation of Steel Substrates Before
Application of Paints and Related Products Tests for Surface Cleanliness - Part 3:
Assessment of Dust on Steel Surface
Prepared for Painting (Pressure-Sensitive
Tape Method) (V)
2000 Preparation of Steel Substrates Before
Application of Paints and Related Products Tests for the Assessment of Surface
Cleanliness - Part 4: Guidance on the
Estimation of the Probability of
Condensation Prior to Paint Application Also
Numbered as BS
2000 Preparation of Steel Substrates Before
Application of Paints and Related Products Tests for the Assessment of Surface
Cleanliness - Part 6: Extraction of Soluble
Contaminants for Analysis - The Bresle
Method Also Numbered as BS 7079-B6:
1996; (V)
2001 Amd 1 Preparation of Steel Substrates
Before Application of Paints and Related
Products - Group B: Methods for the
Assessment of Surface Cleanliness - Part B9:
Field Method for the Conductometric
Determination of Water-Soluble Salts AMD
12095:June 20
1995 Amd 1 Preparation of Steel Substrates
BS EN ISO 8503-2
BS EN ISO 8503-3
BS EN ISO 8503-4
BS EN ISO 8612
BS EN ISO 8536-3
BS EN ISO 8536-3
BS EN ISO 8537
BS EN ISO 8504-1
BS EN ISO 8504-2
Before Application of Paints and Related
Products - Surface Roughness Characteristics
of Blast-Cleaned Steel Substrates Part 1:
Specifications and Definitions for ISO
Surface Profile Comparators for the
Assessmen
1995 Amd 1 Preparation of Steel Substrates
Before Application of Paints and Related
Products - Surface Roughness Characteristics
of Blast - Cleaned Steel Substrates Part 2:
Method for the Grading of Surface Profile of
Abrasive Blast-Cleaned Steel - Compar
1995 Amd 1 Preparation of Steel Substrates
Before Application of Paints and Related
Products - Surface Roughness Characteristics
of Blast -Cleaned Steel Substrates Part 3:
Method for the Calibration of ISO Surface
Profile Comparators and for the Determina
1995 Amd 1 Preparation of Steel Substrates
Before Application of Paints and Related
Products - Surface Roughness Characteristics
of Blast-Cleaned Steel Substrates Part 4:
Method for the Calibration of ISO Surface
Profile Comparators and for the Determinat
2001 Ophthalmic Instruments - Tonometers
(N)
1999 Infusion Equipment for Medical Use Part 3: Aluminium Caps for Infusion Bottles
(N)
1999 Corr 1 Infusion Equipment for Medical
Use - Part 3: Aluminium Caps for Infusion
Bottles AMD 10829; April 2000; (N)
1995 Amd 1 Sterile, Single-Use Syringes,
with or without Needle, for Insulin (AMD
8538) February 15, 1995 (Formerly BS 7548:
1992) (N)
2001 Preparation of Steel Substrates Before
Application of Paints and Related Products Surface Preparation Methods - Part 1:
General Principles Renumbers BS 7079D1:2000; (V)
2001 Preparation of Steel Substrates Before
Application of Paints and Related Products Surface Preparation Methods - Part 2:
Abrasive Blast-Cleaning Renumbers BS
7079-D2:2000; (V)
BS EN ISO 8504-3
BS EN ISO 8780-2
BS EN ISO 8780-3
BS EN ISO 8780-4
BS EN ISO 8780-5
BS EN ISO 8780-6
BS EN ISO 8781-1
BS EN ISO 8781-2
2001 Preparation of Steel Substrates Before
Application of Paints and Related Products Part 3: Hand - and Power-Tool Cleaning
Renumbers BS 7079-D3:1993; (V)
1992 Amd 1 Pigments and Extenders Methods of Dispersion for Assessment of
Dispersion Characteristics Part 2: Dispersion
Using an Oscillatory Shaking Machine
(AMD 8529) August 15, 1995 (Formerly BS
3483: Part D2: 1991. Replaces BS 3483: Part
B5: 1974) (W
1995 Pigments and Extenders - Methods of
Dispersion for Assessment of Dispersion
Characteristics Part 3: Dispersion Using a
High-Speed Impeller Mill Renumbers BS
3483: Part D3: 1991; (W)
1995 Amd 1 Pigments and Extenders Methods of Dispersion for Assessment of
Dispersion Characteristics Part 4: Dispersion
Using a Bead Mill (AMD 8527) August
15,1995 (Formerly BS 3483: Part D4: 1991)
(W)
1995 Amd 1 Pigments and Extenders Methods of Dispersion for Assessment of
Dispersion Characteristics Part 5: Dispersion
Using an Automatic Muller (AMD 8526)
August 15, 1995 (Formerly BS 3483: Part
D5: 1991) (W)
1995 Amd 1 Pigments and Extenders Methods of Dispersion for Assessment of
Dispersion Characteristics Part 6: Dispersion
Using a Triple-Roll Mill (AMD 8531)
August 15, 1995 (Formerly BS 3483: Part
D6: 1991) (W)
1995 Amd 1 Pigments and Extenders Methods of Assessment of Dispersion
Characteristics Part 1: Assessment from the
Change in Tinting Strength of Coloured
Pigments (AMD 8525) August 15, 1995
(Formerly BS 3483: Part E1: 1991) (W)
1995 Amd 1 Pigments and Extenders Methods of Assessment of Dispersion
Characteristics Part 2: Assessment from the
Change in Fineness of Grind (AMD 8530)
August 15, 1995 (Formerly BS 3483: Part
E2: 1991) (W)
BS EN ISO 8781-3
BS EN ISO 8785
BS EN ISO 8819
BS EN ISO 8986-2
BS EN ISO 8990
BS EN ISO 9000
BS EN ISO 9000-1
BS EN ISO 8980-3
BS EN ISO 8980-4
BS EN ISO 8986-1
BS EN ISO 8986-2
1995 Amd 1 Pigments and Extenders Methods of Assessment of Dispersion
Characteristics Part 3: Assessment from the
Change in Gloss (AMD 8532) August 15,
1995 (Formerly BS 3483: Part E3: 1991) (W)
1999 Geometrical Product Specification
(GPS) - Surface Imperfections - Terms,
Definitions and Parameters (G)
1995 Methods of Test for Petroleum and Its
Products Part 401: Liquefied Petroleum
Gases - Detection of Hydrogen Sulfide Lead Acetate Method (ISO 8819: 1993)
(Also Numbered BS 2000: Part 401: 1995.
Replaces BS 2000: Pt 401: 1994) (W)
1996 Plastics - Polybutene (PB) Moulding
and Extrusion Materials Part 2: Preparation
of Test Specimens and Determination of
Properties (V)
1996 Thermal Insulation - Determination of
Steady-State Thermal Transmission
Properties - Calibrated and Guarded Hot Box
(F)
2000 Quality Management Systems Fundamentals and Vocabulary Supersedes
BS EN ISO 8402:1995; (G)
1994 Quality Management and Quality
Assurance Standards Part 1: Guidelines for
Selection and Use (Replaces BS 5750:
Section 0.1: 1987) (G)
1999 Corr 1 Ophthalmic Optics - Uncut
Finished Spectacle Lenses - Part 3:
Transmittance Specifications and Test
Methods Also Numbered as BS 2738-9:1999;
CORR 10800: December 1999; (N)
2000 Ophthalmic Optics - Uncut Finished
Spectacle Lenses - Part 4: Specifications and
Test Methods for Anti-Reflective Coatings
Also Known as BS 2738-10:2000; (N)
1999 Amd 1 Plastics - Polybutene (PB)
Moulding and Extrusion Materials Part 1:
Designation System and Basis for
Specifications Amd 10639; November 1999;
Renumbers BS ISO 8986-1:1993; (V)
1996 Amd 1 Plastics - Polybutene (PB)
Moulding and Extrusion Materials - Part 2:
Preparation of Test Specimens and
BS EN ISO 8988
BS EN ISO 9004
BS EN ISO 9054
BS EN ISO 9073-2
BS EN ISO 9073-4
BS EN ISO 9167-1
BS EN ISO 9167-2
BS EN ISO 9187-1
BS EN ISO 9187-1
BS EN ISO 9187-2
BS EN ISO 9187-2
BS EN ISO 9220
Determination of Properties AMD 12041:
May 2001; (V)
1997 Plastics - Phenolic Resins Determination of Hexamethylenetetramine
Content - Kjeldahl Method and Perchloric
Acid Method Also Numbered as BS 2782:
Part 4: Methods 451X and 451Y: 1997; (V)
2000 Quality Management Systems Guidelines for Performance Improvements
Supersedes BS EN ISO 9004-1: 1994; (G)
1999 Cellular Plastics, Rigid - Test Methods
for Self-Skinned High-Density Materials (V)
1997 Textiles - Test Methods for Nonwovens
Part 2: Determination of Thickness
Supersedes BS EN 29073-2 : 1992; (L)
1997 Textiles - Test Methods for Nonwovens
Part 4: Determination of Tear Resistance ISO
9073-4: 1997; Supersedes BS EN 29073-4 :
1992; (L)
1995 Amd 1 Rapeseed - Determination of
Glucosinolates Content - Part 1: Method
Using High-Performance Liquid
Chromatography AMD 8830; November 15,
1995; Also Numbered BS 4289: Part 9: 1993;
(W)
1997 Rapeseed - Determination of
Glucosinolates Content Part 2: Method Using
X-Ray Fluorescence Spectrometry Also
Known as BS 4289: PT 12: 1995; (W)
1999 Injection Equipment for Medical Use Part 1: Ampoules for Injectables Supersedes
BS 795:1983; (N)
1999 Corr 1 Injection Equipment for Medical
Use - Part 1: Ampoules for Injectables CORR
10827; April 2000; Supersedes BS 795:1983;
(N)
1999 Injection Equipment for Medical Use Part 2: One-Point-Cut (OPC) Ampoules (N)
1999 Corr 1 Injection Equipment for Medical
Use - Part 2: One-Point-Cut (OPC)
Ampoules CORR 10826; April 2000; (N)
1995 Amd 1 Metallic Coatings Measurement of Coating Thickness Scanning Electron Microscope Method
(AMD 8499) April 15, 1995 (Formerly BS
5411: Part 16: 1989) (F)
BS EN ISO 9237
BS EN ISO 9488
BS EN ISO 9241-1
BS EN ISO 9283
BS EN ISO 9283
BS EN ISO 9241-6
BS EN ISO 9288
BS EN ISO 9289
BS EN ISO 9300
BS EN ISO 9308-1
BS EN ISO 9308-1
BS EN ISO 9308-3
1995 Textiles - Determination of the
Permeability of Fabrics to Air (Supersedes
BS 5636-90) (L)
2000 Solar Energy - Vocabulary (G)
1997 Ergonomic Requirements for Office
Work with Visual Display Terminals (VDTs)
Part 1: General Introduction Supersedes BS
EN 29241-1: 1993; (S)
1998 Manipulating Industrial Robots Performance Criteria and Related Test
Methods Supersedes BS 7228-4.1: 1991; (Q)
1998 Amd 1 Manipulating Industrial Robots
- Performance Criteria and Related Test
Methods AMD 10558; August 1999;
Supersedes BS 7228-4.1: 1991; (Q)
2000 Ergonomic Requirements for Office
Work with Visual Display Terminals (VDTs)
- Part 6: Guidance on the Work Environment
Supersedes BS 7179-6: 1990; (S)
1996 Thermal Insulation - Heat Transfer by
Radiation - Physical Quantities and
Definitions (F)
1995 Amd 1 Oilseed Residues Determination of Free Residual Hexane
(AMD 8829) November 15, 1995 (Also
Numbered BS 4325: Part 11: 1991) (W)
1995 Amd 1 Measurement of Gas Flow by
Means of Critical Flow Venturi Nozzles
(AMD 8878) December 15, 1995 (Formerly
BS 1042: Section 1.3: 1991) (Q)
2000 Water Quality - Detection and
Enumeration of Escherichia Coli and
Coliform Bacteria - Part 1: Membrane
Filtration Method Also Numbered as BS
6068-4.14: 2000; (N)
2000 Corr 1 Water Quality - Detection and
Enumeration of Escherichia Coli and
Coliform Bacteria - Part 1: Membrane
Filtration Method CORR 13415: October
5,2001; Also Numbered as BS 60684.14:2000; (N)
1999 Water Quality - Detection and
Enumeration of Escherichia Coli and
Coliform Bacteria in Surface and Waste
Water - Part 3: Miniaturized Method (Most
Probable Number) by Inoculation in Liquid
BS EN ISO 9308-3
BS EN ISO 9397
BS EN ISO 9408
BS EN ISO 9409-1
BS EN ISO 9409-2
BS EN ISO 9454-2
BS EN ISO 9455-6
BS EN ISO 9455-10
Medium Also Numbered as BS 6068-4.10:
1999; (N)
1999 Corr 1 Water Quality - Detection and
Enumeration of Escherichia Coli and
Coliform Bacteria - Part 3: Miniaturized
Method (Most Probable Number) for the
Detection and Enumeration of E. Coli in
Surface and Waste Water CORR 13021:July
2001; Also Numbere
1997 Plastics - Phenolic Resins Determination of Free-Formaldehyde
Content - Hydroxylamine Hydrochloride
Method Also Numbered as BS 2782: Part 4:
Method 451N: 1997; (V)
1999 Water Quality - Evaluation of Ultimate
Aerobic Biodegradability of Organic
Compounds in Aqueous Medium by
Determination of Oxygen Demand in a
Closed Respirometer Also Numbered as BS
6068-5.11: 1999; Supersedes BS EN 29408:
1993; (N)
1997 Manipulating Industrial Robots Mechanical Interfaces Part 1: Plates (Form
A) ISO 9409-1: 1996; Supersedes BS 7228:
PT5: SEC5.1: 1989; (Q)
1997 Manipulating Industrial Robots Mechanical Interfaces Part 2: Shafts (Form
A) ISO 9409-2: 1996; (Q)
2001 Soft Soldering Fluxes - Classification
and Requirements - Part 2: Performance
Requirements Together with BS EN ISO
9455-6:1997, BS EN ISO 9455-10:2001, BS
EN ISO 9455-10:2001; BS EN ISO 945513:2000, BS EN ISO 9455-15:2001, BS EN
29454-1:1994 and BS
1997 Soft Soldering Fluxes - Test Methods
Part 6: Determination and Detection of
Halide (Excluding Fluoride) Content
Partially Supersedes BS 5625: 1985; (E)
2001 Soft Soldering Fluxes - Test Methods Part 10: Flux Efficacy Test, Solder Spresd
Method Together with BS EN ISO 94542:2001, BS EN ISO 9455-6:1997, BS EN
ISO 9455-13:2000, BS EN ISO 945515:2000, BS EN 29454-1:1994 and BS EN
29455-1:1994 Supersedes
BS EN ISO 9455-12
BS EN ISO 9455-13
BS EN ISO 9455-15
BS EN ISO 9456
BS EN ISO 9509
BS EN ISO 9514
BS EN ISO 3741
BS EN ISO 3741
BS EN ISO 3743-1
BS EN ISO 3743-2
1994 Soft Soldering Fluxes - Test Methods
Part 12: Steel Tube Corrosion Test (F)
2000 Soft Soldering Fluxes - Test Methods Part 13: Determination of Flux Spattering
Partially Supersedes BS 5625: 1980; (F)
2000 Soft Soldering Fluxes - Test Methods Part 15: Copper Corrosion Test Partially
Supersedes BS 5625: 1980 Which Will Be
Withdrawn upon Publication of Other
European Standards in This Series; (F)
1997 Optics and Optical Instruments Ophthalmic Optics - Marking of Spectacle
Frames Renumbers BS 6625: Part 2: 1992;
(N)
1995 Amd 1 Water Quality Part 5: Biological
Methods Section 5.9: Method for Assessing
the Inhibition of Nitrification of Activated
Sludge Micro- Organisms by Chemicals and
Waste Water (ISO 9509: 1989) (AMD 8456)
March 15, 1995 (Also Numbered BS 6068:
Part
1995 Amd 1 Paints and Varnishes Determination of the Pot-Life of Liquid
Systems - Preparation and Conditioning of
Samples and Guidelines for Testing (AMD
8352) February 15, 1995 (Also Numbered BS
3900: Part A18: 1993) (W)
2000 Acoustics - Determination of Sound
Power Levels of Noise Sources Using Sound
Pressure - Precision Methods for
Reverberation Rooms Supersedes BS 4196-1:
1991 and BS 4196-2: 1991; (H)
2000 Corr 1 Acoustics - Determination of
Sound Power Levels of Noise Sources Using
Sound Pressure - Precision Methods for
Reverberation Rooms CORR
13273:September 2001; Supersedes BS
4196-1:1991 and BS 4196-2:1991; (H)
1995 Amd 1 Acoustics - Determination of
Sound Power Levels of Noise Sources Engineering Methods for Small, Moveable
Sources in Reverberant Fields Part 1:
Comparison for Hard-Walled Test Rooms
(AMD 8937) December 15, 1995 (Formerly
BS ISO 3743-1: 1994) (
1997 Amd 1 Acoustics - Determination of
BS EN ISO 3744
BS EN ISO 3747
BS EN ISO 3796
BS EN ISO 3822-3
BS EN ISO 3822-4
BS EN ISO 3892
BS EN ISO 3946
BS EN ISO 3947
BS EN ISO 3950
BS EN ISO 3838
Sound Power Levels of Noise Sources Using
Sound Pressure - Engineering Methods for
Small, Movable Sources in Reverberant
Fields Part 2: Methods for Special
Reverberation Test Rooms AMD 9426
March 15, 1997; Renumberi
1995 Amd 1 Acoustics - Determination of
Sound Power Levels of Noise Sources Using
Sound Pressure - Engineering Method in an
Essentially Free Field over a Reflecting Plane
(AMD 8936) December 15, 1995 (Formerly
BS ISO 3744: 1994. Replaces BS 4196: Part
4:
2000 Acoustics - Determination of Sound
Power Levels of Noise Sources Using Sound
Pressure - Comparison Method in Situ
Supersedes BS 4196: Part 7:1988 Which is
Withdrawn.(F)
2001 Ships and Marine Technology - Clear
Openings for External Single-Leaf Doors
Renumbers BS ISO 3796:1999; (Q)
1997 Acoustics - Laboratory Tests on Noise
Emission from Appliances and Equipment
Used in Water Supply Installations Part 3:
Mounting and Operating Conditions for inLine Valves and Appliances Supersedes BS
6864:Part 3 : 1987; (R)
1997 Acoustics - Laboratory Tests on Noise
Emission from Appliances and Equipment
Used in Water Supply Installations Part 4:
Mounting and Operating Conditions for
Special Appliances Supersedes BS 6864: Part
4 : 1987; (R)
2001 Conversion Coatings on Metallic
Materials - Determination of Coating Mass
Per Unit Area - Gravimetric Methods (F)
1994 Starches and Derived Products Determination of Total Phosphorous Content
- Spectrometric Method (W)
1994 Starches, Native or Modified Determination of Total Fat Content (W)
1997 Dentistry - Designation System for
Teeth and Areas of the Oral Cavity
Supersedes BS 6816: 1987; (N)
1996 Amd 1 Methods for Determination of
Density or Relative Density of Petroleum
BS EN ISO 3882
BS EN ISO 3993
BS EN ISO 3994
BS EN ISO 4023
BS EN ISO 4119
BS EN ISO 4172
BS EN ISO 4617
BS EN ISO 4259
BS EN ISO 4267-2
BS EN ISO 4287
BS EN ISO 4491-2
Products (Pyknometer Methods) (AMD
8893) April 15, 1996 (Replaces BS 2000:
Part 270: 1994) (W)
1995 Amd 1 Metallic and Other Non-Organic
Coatings - Review of Methods of
Measurement of Thickness (AMD 8496)
April 15, 1995 (Formerly BS 5411: Part 2:
1987) (F)
1996 Liquefied Petroleum Gas and Light
Hydrocarbons - Determination of Density or
Relative Density - Pressure Hydrometer
Method (Replaces BS 6665: 1985) (W)
2001 Plastics Hoses - Helical-ThermoplasticReinforced Thermoplastics Hoses for Suction
and Discharge of Aqueous Materials Specification Supersedes BS EN
23994:1993; (E)
1995 Amd 1 Rubber Hoses for Steam - Test
Methods (AMD 8145) July 15, 1995
(Formerly BS 5173: Section 103.8: 1991.
Replaces 5173-103-8: 1986) (E)
1996 Amd 1 Pulps - Determination of Stock
Concentration (AMD 9266) October 15,
1996 (H)
1997 Technical Drawings - Construction
Drawings - Drawings for the Assembly of
Prefabricated Structures (G)
2000 Paints and Varnishes - List of
Equivalent Terms (G)
1996 Methods of Test for Petroleum and Its
Products Part 367: Petroleum Products Determination and Application of Precision
Data in Relation to Methods of Test (ISO
4259: 1992) (W)
1996 Amd 1 Petroleum and Liquid Petroleum
Products - Calculation of Oil Quantities Part
2: Dynamic Measurements (AMD 8896)
March 15, 1996 (W)
2000 Geometrical Product Specification
(GPS) - Surface Texture: Profile Method Terms, Definitions and Surface Texture
Parameters (H)
1999 Metallic Powders - Determination of
Oxygen Content by Reduction Methods Part 2: Loss of Mass on Hydrogen Reduction
(Hydrogen Loss) Supersedes BS EN 24491-
BS EN ISO 4518
BS EN ISO 4524-3
BS EN ISO 4524-6
BS EN ISO 4535
BS EN ISO 4538
BS EN ISO 4541
BS EN ISO 4543
BS EN ISO 4618-2
BS EN ISO 4536
BS EN ISO 4618-3
2: 1993; (V)
1995 Amd 1 Metallic Coatings Measurement of Coating Thickness Profilometric Method (AMD 8483) July 15,
1995 (Formerly BS 5411: Part 7: 1981) (F)
1995 Amd 1 Metallic Coatings - Test
Methods for Electrodeposited Gold and Gold
Alloy Coatings - Part 3: Electrographic Tests
for Porosity (AMD 8479) July 15, 1995
(Formerly BS 6770: Part 3: 1986. Replaces
BS 4292: 1968) (F)
1995 Amd 1 Metallic Coatings - Test
Methods for Electrodeposited Gold and Gold
Alloy Coatings Part 6: Determination of the
Presence of Residual Salts (AMD 8498)
April 15, 1995 (Formerly BS 6670: Part 6:
1989) (F)
2000 Vitreous and Porcelain Enamels Apparatus for Determination of Resistance to
Hot Detergent Solutions Used for Washing
Textiles Renumbers BS 1344-19; Also
Numbered as BS 1344-19: 2000; Supersedes
BS 1344-19: 1984; (F)
1995 Amd 1 Metallic Coatings Thioacetamide Corrosion Test (TAA Test)
(AMD 8478) May 15, 1995 (Formerly BS
4566: Part 4: 1979) (F)
1995 Amd 1 Metallic and Other Non-Organic
Coatings - Corrodkote Test (CORR Test)
(AMD 8509) April 15, 1995 (Formerly BS
5466: Part 5: 1979) (F)
1995 Metallic and Other Non-Organic
Coatings - General Rules for Corrosion Tests
Applicable for Storage Conditions (V)
2000 Paints and Varnishes - Terms and
Definitions for Coating Materials - Part 2:
Special Terms Relating to Paint
Characteristics and Properties (W)
1995 Amd 1 Metallic and Non-Organic
Coatings on Metallic Substrates - Saline
Droplets Corrosion Test (SD Test) (AMD
8477) July 15, 1995 (Formerly BS 5466: Part
9: 1986) (F)
2000 Paints and Varnishes - Terms and
Definitions for Coating Materials - Part 3:
Surface Preparation and Methods of
BS EN ISO 4622
BS EN ISO 4623-1
BS EN ISO 4671
BS EN ISO 4672
BS EN ISO 4753
BS EN ISO 4759-3
BS EN ISO 4869-2
BS EN ISO 4869-4
BS EN ISO 4871
BS EN ISO 4892-1
BS EN ISO 4892-2
BS EN ISO 4892-3
Application (W)
1995 Amd 1 Paints and Varnishes - Pressure
Test for Stackability (AMD 8357) February
15, 1995 (Also Numbered BS 3900: Part C7:
1993. Replaces BS 3900: Part C7: 1982) (W)
2002 Paints and Varnishes - Determination of
Resistance to Filiform Corrosion - Part 1:
Steel Substrates Superseded by BS EN ISO
4623:1995; (W)
2001 Rubber and Plastics Hoses and Hose
Assemblies - Methods of Measurement of
Dimensions Supersedes BS EN 24671:1993
and BS 5173-101.2:1987; (E)
1999 Rubber and Plastics Hoses - SubAmbient Temperature Flexibility Tests
Supersedes BS EN 24672: 1993; (E)
2000 Fasteners - Ends of Parts with External
ISO Metric Screw Thread Supersedes BS
6567: 1985; (E)
2000 Tolerances for Fasteners - Part 3: Plain
Washers for Bolts, Screws and Nuts Product Grades A and C Supersedes BS
6322-3:1992; (E)
1995 Amd 1 Acoustics - Hearing Protectors
Part 2: Estimation of Effective A-Weighted
Sound Pressure Levels when Hearing
Protectors are Worn (AMD 8935) December
15, 1995 (Formerly BS ISO 4869-2: 1994)
(F)
2000 Acoustics - Hearing Protectors - Part 4:
Measurement of Effective Sound Pressure
Levels for Level-Dependent SoundRestoration Ear Muffs ISO/TR 4869-4:1998;
(F)
1997 Acoustics - Declaration and
Verification of Noise Emission Values of
Machinery and Equipment (F)
2001 Plastics - Methods of Exposure to
Laboratory Light Sources - Part 1: General
Guidance Renumbers BS 2782-5: Method
540D: 1999; (V)
2000 Plastics - Methods of Exposure of
Laboratory Light Sources - Part 2: Xenon
Arc Sources Renumbers BS 2782-5: Method
540E: 1995; (V)
2000 Plastics - Methods of Exposure to
BS EN ISO 4894-1
BS EN ISO 4894-2
BS EN ISO 4957
BS EN ISO 5211
BS EN ISO 4895
BS EN ISO 5079
BS EN ISO 5084
BS EN ISO 5155
BS EN ISO 5155
BS EN ISO 5172
BS EN ISO 5183-1
BS EN ISO 5183-2
Laboratory Light Sources - Part 3:
Fluorescent UV Lamps Renumbers BS 27825: Method 540F: 1995; (V)
1999 Amd 1 Plastics - Styrene/Acrylonitrile
(SAN) Moulding and Extrusion Materials
Part 1: Designation System and Basis for
Specifications AMD 10664; November 1999;
Supersedes BS ISO 4894-1:1997 and
Together with BS EN ISO 4894-2
Supersedes BS 4936:1987;
1999 Amd 1 Plastics - Styrene/Acrylonitrile
(SAN) Moulding and Extrusion Materials
Part 2: Preparation of Test Specimens and
Determination of Properties AMD 10662;
November 1999; Supersedes BS ISO 48942:1995 which is Withdrawn, and Together
with BS EN IS
2000 Tool Steels Supercedes BS 4659:1989;
(V)
2001 Industrial Valves - Part-Turn Actuator
Attachments (Q)
2000 Plastics - Liquid Epoxy Resins Determination of Tendency to Crystallize
Renumbers BS ISO 4895: 1997; (V)
1996 Textiles - Fibres - Determination of
Breaking Force and Elongation at Break of
Individual Fibres (L)
1997 Textiles - Determination of Thickness
of Textiles and Textile Products (L)
1996 Household Refrigerating Appliances Frozen Food Storage Cabinets and Food
Freezers - Characteristics and Test Methods
(L)
1996 Amd 1 Household Refrigerating
Appliances - Frozen Food Storage Cabinets
and Food Freezers - Characteristics and Test
Methods AMD 9242 December 15, 1996; (L)
1997 Manual Blowpipes for Welding,
Cutting and Heating - Specifications and
Tests (F)
2001 Resistance Welding Equipment Electrode Adaptors, Male Taper 1:10 - Part 1:
Conical Fixing, Taper 1:10 Supersedes BS
EN 25183-1:1992; (F)
2001 Resistance Spot Welding - Electrode
Adaptors, Male Taper 1:10 - Part 2: Parallel
BS EN ISO 5198
BS EN ISO 5198
BS EN ISO 5261
BS EN ISO 5267-1
BS EN ISO 5269-1
BS EN ISO 5269-2
BS EN ISO 5269-2
BS EN ISO 5270
BS EN ISO 5349-1
BS EN ISO 5349-2
BS EN ISO 6873
BS EN ISO 5377
Shank Fixing for End-Thrust Electrodes
Supersedes BS EN 25183-2:1992; (F)
1999 Centrifugal, Mixed Flow and Axial
Pumps - Code for Hydraulic Performance
Tests - Precision Class Supersedes BS 53163: 1988; (Q)
1999 Corr.1 Centrifugal, Mixed Flow and
Axial Pumps - Code for Hydraulic
Performance Tests - Precision Class CORR
10668; August 1999; Supersedes BS 5316-3:
1988; (Q)
1999 Technical Drawings - Simplified
Representation of Bars and Profile Sections
(G)
2001 Pulps - Determination of Drainability Part 1: Schopper-Riegler Method ISO 52671:1999; Supersedes BS 6035-1:1981; (H)
2001 Pulps - Preparation of Laboratory
Sheets for Physical Testing - Part 1:
Conventional Sheet-Former Method
Renumbers BS ISO 5269-1:1998; (H)
2001 Pulps - Preparation of Laboratory
Sheets for Physical Testing - Part 2: RapidKothen Method Supersedes BS ISO 52692:1998; (H)
2001 Pulps - Preparation of Laboratory
Sheets for Physical Testing - Part 2: RapidKothen Method Renumbers BS ISO 52692:1998; (H)
2000 Pulps - Laboratory Sheets Determination of Physical Properties
Supersedes BS ISO 5270: 1998; (V)
2001 Corr 2 Mechanical Vibration Measurement and Evaluation of Human
Exposure to Hand-Transmitted Vibration Part 1: General Requirements CORR 13821:
March 27, 2002; Supersedes BS 6842:1987;
(N)
2002 Mechanical Vibration - Measurement
and Evaluation of Human Exposure to HandTransmitted Vibration - Part 2: Practical
Guidance for Measurement at the Workplace
(N)
2000 Dental Gypsum Products Supersedes
BS 7013: 1989; (N)
1994 Starch Hydrolysis Products -
BS EN ISO 5378
BS EN ISO 5381
BS EN ISO 5436-1
BS EN ISO 6875
BS EN ISO 7093-2
BS EN ISO 5456-1
BS EN ISO 5436-2
BS EN ISO 5436-2
BS EN ISO 5456-2
BS EN ISO 5456-3
BS EN ISO 5458
BS EN ISO 5774
BS EN ISO 5778
Determination of Reducing Power and
Dextrose Equivalent - Lane and Eynon
Constant Titre Method (W)
1994 Starches and Derived Products Determination of Nitrogen Content by the
Kjeldahl Method - Spectrometric Method
(W)
1994 Starch Hydrolysis Products Determination of Water Content - Modified
Karl Fischer Method (W)
2001 Geometrical Product Specifications
(GPS) - Surface Texture: Profile Method;
Measurement Standards - Part 1: Material
Measures (H)
1997 Dental Equipment - Dental Patient
Chair (N)
2000 Plain Washers - Large Series - Part 2:
Product Grade C (E)
1999 Technical Drawings - Projection
Methods - Part 1: Synopsis (G)
(FAULTY STANDARD) 2002 Geometrical
Product Specifications (GPS) - Surface
Texture: Profile Method; Measurement
Standards - Part 2: Software Measurement
Standards (H)
2002 Corr 1 Geometrical Product
Specifications (GPS) - Surface Texture:
Profile Method; Measurement Standards Part 2: Software Measurement Standards
CORR 13802: March 19, 2002; (H)
1999 Technical Drawings - Projection
Methods - Part 2: Orthographic
Representations (G)
1999 Technical Drawings - Projection
Methods - Part 3: Axonometric
Representations (G)
1999 Geometrical Product Specifications
(GPS) - Geometrical Tolerancing - Positional
Tolerancing Partially Supersedes BS 308-3:
1990; (H)
2001 Plastic Hoses, Textile-Reinforced, for
Compressed Air - Specification Supersedes
BS 6066:1981; (E)
2000 Ships and Marine Technology - Small
Weathertight Steel Hatches Supersedes BS
MA 8: 1983; (Q)
BS EN ISO 5809
BS EN ISO 5810
BS EN ISO 5828
BS EN ISO 5828
BS EN ISO 5845-1
BS EN ISO 5981
BS EN ISO 6042
BS EN ISO 6103
BS EN ISO 6179
BS EN ISO 6222
BS EN ISO 6272
BS EN ISO 6320
BS EN ISO 6330
1994 Starches and Derived Products Determination of Sulfated Ash (W)
1994 Starches and Derived Products Determination of Chloride - Content
Potentiometric Method (ISO 5810: 1982)
(W)
2001 Resistance Welding Equipment Secondary Connecting Cables with
Terminals Connected to Water-Cooled Lugs Dimensions and Characteristics (F)
1997 Resistance Welding Equipment Secondary Connecting Cables with
Terminals Connected to Water-Cooled Lugs Dimensions and Characteristics (F)
1999 Technical Drawings - Simplified
Representation of the Assembly of Parts with
Fasteners - Part 1: General Principles (G)
1997 Rubber- or Plastics-Coated Fabrics Determination of Resistance to Combined
Shear Flexing and Rubbing (V)
2000 Ships and Marine Technology Weathertight Single-Leaf Steel Doors
Supersedes BS MA 38: 1973; (Q)
1999 Bonded Abrasive Products Permissible Unbalances of Grinding Wheels
as Delivered - Testing Supersedes BS 44813: 1988; (F)
2001 Rubber, Vulcanized or Thermoplastic Rubber Sheets and Rubber-Coated Fabrics Determination of Transmission Rate of
Volatile Liquids (Gravimetric Technique)
Renumbers BS ISO 6179:1998; (V)
1999 Water Quality - Enumeration of
Culturable Micro-Organisms - Colony Count
by Inoculation in a Nutrient Agar Culture
Medium Also Numbered as BS EN ISO
6068-4.5: 1999 (N)
1994 Amd 1 Paints and Varnishes - FallingWeight Test AMD 8354; February 15, 1995;
Also Numbered BS 3900: Part E13: 1993;
Replaces BS 3900: Part E3: 1973; (W)
2000 Animal and Vegetable Fats and Oils Determination of Refractive Index Also
Numbered as BS 684-1.2: 2000; Supersedes
BS 684-1.2: 1996; (W)
2001 Textiles - Domestic Washing and
BS EN ISO 6341
BS EN ISO 6346
BS EN ISO 6402-1
BS EN ISO 6402-1
BS EN ISO 6402-2
BS EN ISO 6412-3
BS EN ISO 6427
BS EN ISO 6468
BS EN ISO 6529
Drying Procedures for Textile Testing
Supersedes BS EN 26330: 1994; (L)
1996 Water Quality - Determination of the
Inhibition of the Mobility of Daphnia Magna
Straus (Cladocera, Crustacea) - Acute
Toxicity Test (N)
1996 Freight Containers - Coding,
Identification and Marking (H)
2001 Plastics - Acrylonitrile-StyreneAcrylate (ASA), Acrylonitrile-(EthylenePropylene-Diene)-Styrene (AEPDS) and
Acrylonitrile-(Chlorinated Polyethylene)Styrene (ACS) ) Moulding and Extrusion
Materials - Part 1: Designation System and
Basis for Specifi
2001 Corr 1 Plastics - Acrylonitrile-StyreneAcrylate (ASA), Acrylonitrile-(EthylenePropylene-Diene)-Styrene (AEPDS) and
Acrylonitrile-(Chlorinated Polyethylene)Styrene (ACS) Moulding and Extrusion
Materials - Part 1: Designation System and
Basis for Sp
1999 Amd 1 Plastics - Impact-Resistant
Acrylonitrile/Styrene (ASA, AES, ACS)
Moulding and Extrusion Materials,
Excluding Butadiene-Modified Materials Part 2: Preparation of Test Specimens and
Determination of Properties Amd 10652;
November 1999; Renumbe
1996 Technical Drawings - Simplified
Representation of Pipelines Part 3: Terminal
Features of Ventilation and Drainage
Systems (G)
1999 Plastics - Determination of Matter
Extractable by Organic Solvents
(Conventional Methods) Renumbers BS
2782: Part 4: Method 455A: 1993; (V)
1997 Water Quality - Determination of
Certain Organochlorine Insecticides,
Polychlorinated Biphenyls and
Chlorobenzenes - Gas Chromatographic
Method After Liquid-Liquid Extraction Also
Known as BS 6068: Section 2.57: 1997; (N)
2001 Protective Clothing - Protection Against
Chemicals - Determination of Protective
Clothing Materials to Permeation by Liquids
BS EN ISO 6551
BS EN ISO 6603-1
BS EN ISO 6603-2
BS EN ISO 6603-2
BS EN ISO 6708
BS EN ISO 6721-1
BS EN ISO 6721-2
BS EN ISO 6946
BS EN ISO 6947
BS EN ISO 7029
BS EN ISO 7093-1
BS EN ISO 7094
BS EN ISO 7096
BS EN ISO 6988
and Gases ISO 6529:2001; Supersedes BS
EN 369:1993; (N)
1996 Amd 1 Petroleum Liquids and Gases Fidelity and Security of Dynamic
Measurement - Cabled Transmission of
Electric and/or Electronic Pulsed Data (AMD
8894) March 15, 1996 (S)
2000 Plastics - Determination of Puncture
Impact Behaviour of Rigid Plastics - Part 1:
Non-Instrumented Impact Testing (V)
2000 Corr 1 Plastics - Determination of
Puncture Impact Behaviour or Rigid Plastics
- Part 2: Instrumented Puncture Testing
CORR 13053; April 2001; (V)
2000 Corr 2 Plastics - Determination of
Puncture Impact Behaviour or Rigid Plastics
- Part 2: Instrumented Puncture Testing
CORR 13758: March 15, 2002; (V)
1996 Pipework Components - Definition and
Selection of DN (Nominal Size) (E)
1996 Plastics - Determination of Dynamic
Mechanical Properties Part 1: General
Principles (V)
1996 Plastics - Determination of Dynamic
Mechanical Properties Part 2: TorsionPendulum Method (V)
1997 Building Components and Building
Elements - Thermal Resistance and Thermal
Transmittance - Calculation Method (R)
1997 Welds - Working Positions Definitions of Angles of Slope and Rotation
(F)
2000 Acoustics - Statistical Distribution of
Hearing Thresholds as a Function of Age
Supersedes BS 6957:1988; (N)
2000 Corr 1 Plain Washers - Large Series Part 1: Product Grade A CORR 13151: May
2001; (E)
2000 Corr 1 Plain Washers - Extra Large
Series - Product Grade C CORR 13077:July
2001; (E)
2000 Earth-Moving Machinery - Laboratory
Evaluation of Operator Seat Vibration (R)
1995 Amd 1 Metallic and Other Non-Organic
Coatings - Sulfur Dioxide Test with General
Condensation of Moisture (AMD 8507) April
BS EN ISO 7438
BS EN ISO 7493
BS EN ISO 7208
BS EN ISO 7233
BS EN ISO 7235
BS EN ISO 7253
BS EN ISO 7253
BS EN ISO 7278-1
BS EN ISO 7278-2
BS EN ISO 7284
BS EN ISO 9997
BS EN ISO 11144
BS EN ISO 11246
BS EN ISO 7291
15, 1995 (Formerly BS 5466: Part 8: 1986)
(F)
2000 Metallic Materials - Bend Test
Supersedes BS 1639: 1964; (V)
2000 Dental Operator's Stool (N)
2000 Skimmed Milk, Whey and Buttermilk Determination of Fat Content - Gravimetric
Method (Reference Method) (W)
1995 Amd 1 Rubber and Plastics Hoses and
Hose Assemblies - Determination of Suction
Resistance (ISO 7233: 1991) (AMD 8144)
July 15, 1995 (Formerly BS 5173: Section
102.9: 1992. Replaces 5173-102-9: 1985) (E)
1996 Acoustics - Measurement Procedures
for Ducted Silencers - Insertion Loss, Flow
Noise and Total Pressure Loss (F)
2001 Corr 1 Paints and Varnishes Determination of Reisitance to Neutral Salt
Spray (Fog) CORR 13775: March 18, 2002;
(W)
2001 Paints and Varnishes - Determination of
Reisitance to Neutral Salt Spray (Fog)
Renumbers BS 3900-F12:1997; (W)
1996 Amd 1 Liquid Hydrocarbons - Dynamic
Measurement - Proving Systems for
Volumetric Meters Part 1: General Principles
(AMD 8895) April 15, 1996 (W)
1996 Amd 1 Liquid Hydrocarbons - Dynamic
Measurement - Proving Systems for
Volumetric Meters Part 2: Pipe Provers
(AMD 8899) June 15, 1996 (W)
1996 Resistance Welding Equipment Particular Specifications Applicable to
Transformers with Two Separate Secondary
Windings for Multi-Spot Welding as Used in
the Automobile Industry (F)
2000 Dental Cartridge Syringes Supersedes
BS 7432: 1991; (N)
1997 Dental Equipment - Connections for
Supply and Waste Lines (N)
2000 Dental Ethyl Silicate Bonded Casting
Investments (N)
2001 Gas Welding Equipment - Pressure
Regulators for Manifold Systems Used in
Welding, Cutting and Allied Processes up to
300 Bar Supersedes BS EN 961:1996; (F)
BS EN ISO 7327
BS EN ISO 7328
BS EN ISO 7345
BS EN ISO 7391-1
BS EN ISO 7519
BS EN ISO 899-1
BS EN ISO 899-2
BS EN ISO 1042
BS EN ISO 7536
BS EN ISO 7539-1
BS EN ISO 7539-2
BS EN ISO 1043-2
1997 Plastics - Hardeners and Accelerators
for Epoxide Resins - Determination of Free
Acid in Acid Anhydride Renumbers BS
2782: Part 4: Method 433E: 1996; (V)
2000 Milk Based Edible Ices and Ice Mixes Determination of Fat Content - Gravimetric
Method (Reference Method) Supercedes BS
2472-3:1989; Also Numbered as BS 24723:2000; (W)
1996 Thermal Insulation - Physical
Quantities and Definitions (F)
2000 Plastics - Polycarbonate (PC) Moulding
and Extursion Materials - Part 1: Designation
System and Basis for Specifications
Renumbers BS ISO 7391-1:1996; (V)
1997 Technical Drawings - Construction
Drawings - General Pricnciples of
Presentation for General Arrangement and
Assembly Drawings (G)
1997 Plastics - Determination of Creep
Behaviour Part 1: Tensile Creep Also
Numbered as BS 2782: Part 3: Method 324A:
1997; (V)
1997 Plastics - Determination of Creep
Behaviour Part 2: Flexural Creep by ThreePoint Loading (V)
2000 Laboratory Glassware - One-Mark
Volumetric Flasks Renumbers BS ISO 1042:
1998; (H)
1996 Methods of Test for Petroleum and Its
Products Part 40: Petroleum Products Determination of Oxidation Stability of
Gasoline - Induction Period Method (ISO
7536: 1994) (W)
1995 Amd 1 Corrosion of Metals and Alloys
- Stress Corrosion Testing Part 1: General
Guidance on Testing Procedures (AMD
8715) October 15, 1995 (Formerly BS 6980:
Part 1: 1988) (V)
1995 Amd 1 Corrosion of Metals and Alloys
- Stress Corrosion Testing Part 2: Preparation
and Use of Bent-Beam Specimens (AMD
8714) October 15, 1994 (Formerly BS 6980:
Part 2: 1990) (V)
2001 Plastics - Symbols and Abbreviated
Terms - Part 2: Fillers and Reinforcing
BS EN ISO 1060-1
BS EN ISO 1060-2
BS EN ISO 1061
BS EN ISO 1061
BS EN ISO 1127
BS EN ISO 1133
BS EN ISO 1157
BS EN ISO 1163-1
BS EN ISO 1163-2
BS EN ISO 1172
Materials Renumbers BS ISO 1043-2:2000;
(F)
1999 Plastics - Homopolymer and
Copolymer Resins of Vinyl Chloride - Part 1:
Designation System and Basis for
Specifications (V)
1999 Plastics - Homopolymer and
Copolymer Resins of Vinyl Chloride - Part 2:
Preparation of Test Samples and
Determination of Properties (V)
1999 Plastics - Unplasticized Cellulose
Acetate - Determination of Free Acidity (V)
1999 Corr 1 Plastics - Unplasticized
Cellulose Acetate - Determination of Free
Acidity CORR 10819: March 2001;
Supersedes BS 2782-4 Method 459A:1991:
(V)
1997 Stainless Steel Tubes - Dimensions,
Tolerances and Conventional Masses Per
Unit Length (H)
2000 Plastics - Determination of the Melt
Mass-Flow Rate (MFR) and the Melt
Volume-Flow Rate (MVR) of
Thermoplastics Renumbers BS 2782-7:
Method 720A: 1997; Supersedes BS 2782-7:
Method 720A:1 979; ISO 1133: 1997; (V)
2000 Plastics - Cellulose Acetate in Dilute
Solution - Determination of Viscosity
Number and Viscosity Ratio Renumbers BS
2782-7 Method 733C: 1991; (V)
2000 Plastics - Unplasticized Poly (Vinyl
Chloride) (PVC-U) Moulding and Extrusion
Materials - Part 1: Designation System and
Basis for Specifications AMD 10719, July
2000; Renumbers BS ISO 1163-1: 1995; (V)
2000 Plastics - Unplasticized Poly(Vinyl
Chloride) (PVC-U) Moulding and Extrusion
Materials - Part 2: Preparation of Test
Specimens and Determination of Properties
Renumbers BS ISO 1163-2: 1995; (V)
1999 Textile-Glass-Reinforced Plastics Prepregs, Moulding Compounds and
Laminates - Determination of the TextileGlass and Mineral-Filler Content Calcination Methods Renumbers BS ISO
1172: 1996; (V)
BS EN ISO 1182
BS EN ISO 1183-3
BS EN ISO 1207
BS EN ISO 1265
BS EN ISO 1307
BS EN ISO 1402
BS EN ISO 1264
BS EN ISO 1403
BS EN ISO 1460
BS EN ISO 1461
BS EN ISO 1463
BS EN ISO 1513
2002 Reaction to Fire Tests for Building
Products - Non-Combustibility Test (R)
1999 Plastics - Methods for Determining the
Density of Non-Cellular Plastics - Part 3: Gas
Pyknometer Method Supersededs Methods A
and B of BS 2782-6: Methods 620A to
620D:1991 Which is Amended; (V)
1994 Amd 1 Slotted Cheese Head Screws Product Grade A (AMD 8439) December 15,
1994 (Formerly BS 7635: 1993) (E)
1997 Plastics - Polyvinyl Chloride Resins Determination of Number of Impurities and
Foreign Particles (V)
1996 Rubber and Plastic Hoses for GeneralPurpose Industrial Applications - Bore
Diameters and Tolerances, and Tolerances on
Length (E)
Rubber and Plastics Hoses and Hoses
Assemblies - Hydrostatic Testing Supersedes
BS 5173: Part 102: Section 102.1: 1991 (E)
1997 Plastics - Homopolymer and
Copolymer Resins of Vinyl Chloride Determination of pH of Aqueous Extract
Also Numbered as BS 2782: PT 4: Meth
454C: 1997; It Supersedes BS 2782: PT 4:
METH 454C: 1978; (V)
1997 Rubber Hoses, Textile-Reinforced, for
General-Purpose Water Application Specification Renumbers BS ISO 1403:
1995; (E)
1995 Metallic Coatings - Hot Dip Galvanized
Coatings on Ferrous Materials - Gravimetric
Determination of the Mass per Unit Area (F)
1999 Hot Dip Galvanized Coatings on
Fabricated Iron and Steel Articles Specifications and Test Methods Supersedes
BS 729: 1971; (F)
1995 Amd 1 Metallic and Oxide Coatings Measurement of Coating Thickness Microscopical Method (AMD 8495) April
15, 1995 (Formerly BS 5411: Part 5: 1984)
(F)
1995 Amd 1 Paints and Varnishes Examination and Preparation of Samples for
Testing (AMD 8331) January 15, 1995 (Also
Numbered BS 3900: Part A2: 1993 Replaces
BS EN ISO 1517
BS EN ISO 1518
BS EN ISO 1522
BS EN ISO 1559
BS EN ISO 1597
BS EN ISO 5263
BS EN ISO 1598
BS EN ISO 1599
BS EN ISO 1600
BS EN ISO 1622-1
BS EN ISO 1622-2
BS EN ISO 1628-2
BS 3900: Part A2:1983) (W)
1995 Amd 1 Paints and Varnishes - SurfaceDrying Test - Ballotini Method (AMD 8609)
September 15, 1995 (Also Numbered BS
3900: Part C2: 1994 Replaces BS 3900: Part
C2: 1971) (W)
2001 Methods of Test for Paints - Part E2:
Scratch Test Renumbers BS 3900-E2: 1992;
(L)
2001 Paints and Varnishes - Pendulum
Damping Test Renumbers BS 3900-E5:1998;
(W)
2001 Corr 1 Dental Materials - Alloys for
Dental Amalgam CORR 13438: August 29,
2001; Supersedes BS EN 21559:1992; (N)
2000 Plastics - Unplasticized Cellulose
Acetate - Determination of Acetic Acid Yield
Renumbers BS ISO 1597: 1994; (V)
1997 Pulps - Laboratory Wet Disintegration
(V)
2000 Plastics - Cellulose Acetate Determination of Insoluble Particles
Renumbers BS 2782-4: Method 480A: 1991;
(V)
1999 Plastics - Cellulose Acetate Determination of Viscosity Loss on
Moulding (V)
1999 Plastics - Cellulose Acetate Determination of Light Absorption on
Moulded Specimens Produced Using
Different Periods of Heating Renumbers BS
2782-5: Meth 553A:1991; BS EN ISO 585:
1990; (V)
2000 Plastics - Polystyrene (PS) Moulding
and Extrusion Materials - Part 1: Designation
System and Basis for Specifications
Renumbers BS ISO 1622-1: 1994; (V)
1999 Amd 1 Plastics - Polystyrene (PS)
Moulding and Extrusion Materials Part 2:
Preparation of Test Specimens and
Determination of Properties Amd 10649;
November 1999; Renumbers BS ISO 16222:1995; (V)
2000 Corr 1 Plastics - Determination of the
Viscosity of Polymers in Dilute Solution
Using Capillary Viscometers - Part 2:
BS EN ISO 1716
BS EN ISO 1746
BS EN ISO 1854
BS EN ISO 1856
BS EN ISO 1628-3
BS EN ISO 1680
BS EN ISO 1736
BS EN ISO 1737
BS EN ISO 1872-1
BS EN ISO 1872-2
BS EN ISO 1973
Poly(Vinyl Chloride) Resins CORR 13105
March 2001; Also Numbered as BS 2782-7:
Method 732B: 1991;(V)
2002 Reaction to Fire Tests for Building
Products - Determination of the Heat of
Combustion (R)
2001 Rubber or Plastics Hoses and Tubing Bending Tests Supersedes BS EN
21746:1993; (E)
2000 Whey Cheese - Determination of Fat
Content - Gravimetric Method (Reference
Method) (W)
2001 Flexible Cellular Polymeric Materials Determination of Compression Set (V)
2000 Plastics - Determination of Viscosity
Number and Limiting Viscosity number Part 3: Polyethylenes and Polypropylenes
Incorporating Amendment No. 1 to BS 27827: Method 732C:1991 (Renumbers the BS as
BS EN ISO 1628-3:2000); (V)
2000 Acoustics - Test Code for the
Measurement of Airborne Noise Emitted by
Rotating Electrical Machinery Supersedes BS
7458 Part 1: 1991 and BS 7458: Part 2: 1991;
(F)
2000 Dried Milk and Dried Milk Products Determination of Fat Content - Gravimetric
Method (Reference Method) Also Numbered
as BS 1743-11: 2000; Supersedes BS 174311: 1986; (W)
2000 Evaporated Milk and Sweetened
Condensed Milk - Determination of Fat
Content - Gravimetric Method (Reference
Method) Also Known as BS 1742-3: 2000;
Supersedes BS 1742-3: 1990; (W)
1999 Plastics - Polyethylene (PE) Moulding
and Extrusion Materials Part 1: Designation
System and Basis for Specifications
Renumbers BS ISO 1872-1:1993; (V)
1997 Plastics - Polyethylene (PE) Moulding
and Extrusion Materials Part 2: Preparation
of Test Specimens and Determination of
Properties (V)
1996 Textile Fibres - Determination of Linear
Density - Gravimetric Method and
Vibroscope Method (L)
BS EN ISO 2039-1
BS EN ISO 2039-2
BS EN ISO 2061
BS EN ISO 2064
BS EN ISO 2078
BS EN ISO 2114
BS EN ISO 2177
BS EN ISO 2178
BS EN ISO 2231
BS EN ISO 2233
BS EN ISO 2409
BS EN ISO 2431
1997 Plastics - Determination of Hardness
Part 1: Ball Indentation Method Supersedes
BS 2782: Part 3: Method 365D: 1991; (V)
2000 Plastics - Determination of Hardness Part 2: Rockwell Hardness Renumbers BS
2782-3: Method 365C: 1992; Supersedes BS
2782: Method 365C: 1986; (V)
1996 Textiles - Determination of Twist in
Yarns - Direct Counting Method (L)
2000 Metallic and Other Inorganic Coatings Definitions and Conventions Concerning the
Measurement of Thickness (F)
1995 Textile Glass - Yarns - Designation
(Also Numbered BS 946: Part 2: 1995) (L)
2000 Plastics (Polyester Resins) and Paints
and Varnishes (Binders) - Determination of
Partial Acid Value and Total Acid Value
Also Known as BS 2782-4: Method 432B:
2000; (V)
1995 Amd 1 Metallic Coatings Measurement of Coating Thickness Coulometric Method by Anodic Dissolution
(AMD 8493) April 15, 1995 (Formerly BS
5411: Part 4: 1986 Replaces BS 5411: Part 4:
1977) (F)
1995 Amd 1 Non-Magnetic Coatings on
Magnetic Substrates - Measurement of
Coating Thickness - Magnetic Method (AMD
8482) August 15, 1995 (Formerly BS 5411:
Part 11: 1984) (F)
1995 Amd 1 Testing Coated Fabrics Part 2:
Method 4: Pre-Conditioning and and
Conditioning of Coated Fabrics for Testing
Purposes (AMD 8189) November 15, 1995
(Also Numbered BS 3424: Part 2: 1992
Replaces BS 3424: Part 2: 1982) (L)
2001 Packaging - Complete, Filled Transport
Packages and Unit Loads - Conditioning for
Testing (H)
1995 Amd 1 Paints and Varnishes - CrossCut Test (AMD 8353) February 15, 1995
(Also Numbered BS 3900: Part E6: 1992
Replaces BS 3900: Part E6: 1974) (W)
1996 Corr 1 Paints and Varnishes Determination of Flow Time by Use of Flow
Cups CORR 10889:February 19, 2002; Also
BS EN ISO 2431
BS EN ISO 2360
BS EN ISO 2361
BS EN ISO 2439
BS EN ISO 2495
BS EN ISO 2555
BS EN ISO 2556
BS EN ISO 2566-1
BS EN ISO 2566-2
BS EN ISO 2578
BS EN ISO 2580-1
BS EN ISO 2580-2
Numbered as BS 3900-A6:1996; (W)
1996 Paints and Varnishes - Determination of
Flow Time by Use of Flow Cups Supersedes
BS EN 535: 1991; (W)
1995 Amd 1 Non-Conductive Coatings on
Non-Magnetic Basis Metals - Measurement
of Coating Thickness - Eddy Current Method
(AMD 8481) June 15, 1995 (Formerly BS
5411: Part 3: 1984) (F)
1995 Amd 1 Electrodeposited Nickel
Coatings on Magnetic and Non-Magnetic
Substrates - Measurement of Coating
Thickness - Magnetic Method (AMD 8484)
July 15, 1995 (Formerly BS 5411: Part 9:
1984) (F)
2001 Flexible Cellular Poymeric Materials Determination of Hardness (Indentation
Technique) Supersedes BS 4443-2:1988; (V)
2001 Iron Blue Pigments Renumbers BS
283:1995; Supersedes BS 283:1965; (W)
2000 Plastics - Resins in the Liquid State or
as Emulsions or Dispersions - Determination
of Apparent Viscosity by the Brookfield Test
Method Renumbers BS 2782-7 Method
730C: 1992; (V)
2001 Plastics - Determination of the Gas
Transmission Rate of Films and Thin Sheets
under Atmospheric Pressure - Manometric
Method Renumbers BS 2782-8: Method
821A:1979; (V)
1999 Steel - Conversion of Elongation
Values - Part 1: Carbon and Low Alloy
Steels Supersedes BS 3894-1:1965; (V)
2001 Steel - Conversion of Elongation
Values - Part 2: Austenitic Steels Supersedes
BS 3894-2: 1985; (V)
1999 Plastics - Determination of TimeTemperature Limits After Prolonged
Exposure to Heat Renumbers BS 2782: Part
1: Method 135: 1993; (V)
2001 Plastics Acrylonitrile/Butadiene/Styrene (ABS)
Moulding and Extrusion Materials - Part 1:
Designation System and Basis for
Specifications (V)
2000 Plastics -
BS EN ISO 2702
BS EN ISO 2738
BS EN ISO 2740
BS EN ISO 2789
BS EN ISO 2806
BS EN ISO 2808
BS EN ISO 2811-1
BS EN ISO 3269
BS EN ISO 2811-1
BS EN ISO 2811-2
BS EN ISO 2811-2
BS EN ISO 2811-4
Acrylonitrile/Butadiene/Styrene (ABS)
Moulding and Extrusion Materials - Part 2:
Preparation of Test Specimens and
Determination of Properties Renumbers BS
ISO 2580-2: 1994; Supersedes BS 4935:
1985; (V)
1995 Amd 1 Heat-Treated Steel Tapping
Screws - Mechanical Properties (AMD 8488)
April 15, 1995 (E)
2000 Sintered Metal Materials, Excluding
Hardmetals - Rermeable Sintered Metal
Materials - Determination of Density, Oil
Content and Open Porosity Supersedes BS
5600-3-3.2: 1988; (V)
2000 Corr 1 Sintered Metal Materials,
Excluding Hardmetals - Tensile Test Pieces
CORR 11050; August 2000; Supersedes BS
5600-3-3.7: 1988; (V)
1995 Amd 0 Information and Documentation
- International Library Statistics Renumbered
BS ISO 2789: 1991; AMD 8778 September
15, 1995; (G)
1997 Industrial Automation Systems Numerical Control of Machines - Vocabulary
Renumbers BS ISO 2806: 1994; (F)
2001 Paints and Varnishes - Determination of
Film Thickness Renumbers BS 3900C5:1997; (W)
2001 Corr 1 Paints and Varnishes Determination of Density - Part 1:
Pyknometer Method CORR 13752: March
19, 2002; Renumbers BS 3900-A19: 1998;
(W)
2001 Fasteners - Acceptance Inspection (E)
2001 Paints and Varnishes - Determination of
Density - Part 1: Pyknometer Method
Renumbers BS 3900-A19:1998; (W)
2001 Paints and Varnishes - Determination of
Density - Part 2: Immersed Body (Plummet)
Method Renumbers BS 3900-A20:1998; (W)
2001 Corr 1 Paints and Varnishes Determination of Density - Part 2: Immersed
Body (Plummet) Method CORR 13753:
March 19, 2002; Renumbers BS 3900-A20:
1998; (W)
2001 Corr 1 Paints and Varnishes -
BS EN ISO 2811-4
BS EN ISO 2812-1
BS EN ISO 2812-2
BS EN ISO 2813
BS EN ISO 2818
BS EN ISO 2819
BS EN ISO 2897-1
BS EN ISO 2897-2
BS EN ISO 2898-1
Determination of Density - Part 4: Pressure
Cup Method CORR 13751: March 19, 2002;
Renumbers BS 3900-A22:1998; (W)
2001 Paints and Varnishes - Determination of
Density - Part 4: Pressure Cup Method
Renumbers BS 3900-A22:1998; (W)
1995 Amd 1 Paints and Varnishes Determination of Resistance to Liquids Part
1: General Methods (AMD 8355) April 15,
1995 (Also Known as BS 3900: Part G5:
1993) (W)
1995 Amd 1 Paints and Varnishes Determination of Resistance to Liquids Part
2: Water Immersion Method AMD 8356;
April 15, 1995; Also Known as BS 3900:
Part G8: 1993; (W)
2000 Paints and Varnishes - Determination of
Specular Gloss of Non-Metallic Paint Films
at 20 Degrees, 60 Degrees and 85 Degrees
Renumbers BS 3900-D5: 1997; Supersedes
BS 3900-D5: 1995; (W)
1997 Plastics - Preparation of Test
Specimens by Machining Supersedes BS
2782: Part 9: Method 930A: 1977;
Renumbers BS 2782: Part 9: Method 930A:
1996; (V)
1995 Amd 1 Metallic Coatings on Metallic
Substrates - Electrodeposited and Chemically
Deposited Coatings - Review of Methods
Available for Testing Adhesion (AMD 8492)
March 15, 1995 (F)
1999 Amd 1 Plastics - Impact-Resistant
Polystyrene (PS-I) Moulding and Extrusion
Materials Part 1: Designation System and
Basis for Specifications Amd 10650;
November 1999; Renumbers BS ISO 28971:1997; Supersedes BS ISO 2897-1:1990;
(V)
1999 Plastics - Impact-Resistant Polystyrene
(PS-I) Moulding and Extrusion Materials Part
2: Preparation of Test Specimens and
Determination of Properties Along with BS
EN ISO 2897-1; Replaces BS 3126: 1987;
Renumbers BS ISO 2897-2:1994; (V)
2000 Amd 1 Plastics - Plasticized Poly(Vinyl
Chloride) (PVC-P) Moulding and Extrusion
BS EN ISO 2898-2
BS EN ISO 2922
BS EN ISO 3001
BS EN ISO 3037
BS EN ISO 3059
BS EN ISO 3167
BS EN ISO 3171
BS EN ISO 3188
BS EN ISO 3098-2
BS EN ISO 3098-2
Materials - Part 1: Designation System and
Basis for Specifications Amendment 10726
October 2000; Renumbers BS ISO 28981:1996; (V)
2000 Amd 1 Plastics - Plasticized Poly(Vinyl
Chloride) (PVC-P) Moulding and Extrusion
Materials Part 2: Preparation of Test
Specimens and Determination of Properties
AMD 10727; February 2000; Renumbers BS
ISO 2898-2:1997; (V)
2001 Acoustics - Measurement of Airborne
Sound Emitted by Vessels on Inland
Waterways and Harbours Supersedes BS EN
22922:1993; (F)
1999 Plastics - Epoxy Compounds Determination of Epoxy Equivalent
Supersedes BS 2782-4: Methods 433C and
433D: 1997; (V)
1996 Amd 1 Corrugated Fibreboard Determination of Edgewise Crush Resistance
(Unwaxed Edge Method) (AMD 9160)
August 15, 1996 (H)
2001 Non-Destructive Testing - Penetrant
Testing and Magnetic Particle Testing Viewing Conditions ISO 3059: 2001;
Supersedes BS 4489:1984; (G)
1997 Plastics - Multipurpose-Test Specimens
Supersedes BS 2782 : Part 9: METH
931A:1988; BS EN ISO 3167:1997; (V)
1999 Petroleum Liquids - Automatic Pipeline
Sampling Supersedes BS 3195-2: 1989; (Q)
1991 Starches and Derived Products Determination of Nitrogen Content by the
Kjeldahl Method - Titrimetric Method (W)
2000 Corr 1 Technical Product
Documentation - Lettering - Part 2: Latin
Alphabet, Numerals and Marks CORR
12053; November 2000; This Standard,
Together with BS 8888 and Other
Implemented European and International
Standards Listed in Annexes A and B of BS
2000 Technical Product Documentation Lettering Part 2: Latin Alphabet, Numerals
and Marks This Standard, Together with BS
8888 and Other Implemented European and
International Standards Listed in Annexes A
BS EN ISO 3098-3
BS EN ISO 3098-3
BS EN ISO 3098-4
BS EN ISO 3098-6
BS EN ISO 3098-6
BS EN ISO 3104
BS EN ISO 3146
and B of BS 8888, Supersedes All Parts of
BS 30
2000 Corr 1 Technical Product
Documentation - Lettering - Part 3: Greek
Alphabet CORR 12054; November 2000;
This Standard, Together with BS 8888 and
Other Implemented European and
International Standards Listed in Annexes A
and B of BS 8888, Supersedes Al
2000 Technical Product Documentation Lettering Part 3: Greek Alphabet This
Standard, Together with BS 8888 and Other
Implemented European and International
Standards Listed in Annexes A and B of BS
8888, Supersedes All Parts of BS 308; (G)
2000 Technical Product Documentation Lettering Part 4: Diacritical and Particular
Marks for the Latin Alphabet This Standard,
Together with BS 8888 and Other
Implemented European and International
Standards Listed in Annexes A and B of BS
8888, Supersed
2000 Corr 1 Technical Product
Documentation - Lettering - Part 6: Cyrillic
Alphabet CORR 12055; November 2000;
This Standard, Together with BS 8888 and
Other Implemented European and
International Standards Listed in Annexes A
and B of BS 8888, Supersedes
2000 Technical Product Documentation Lettering Part 6: Cyeillic Alphabey This
Standard, Together with BS 8888 and Other
Implemented European and International
Standards Listed in Annexes A and B of BS
8888, Supersedes All Parts of BS 308; (G)
1996 Methods of Test for Petroleum and Its
Products Part 71: Section 1: Petroleum
Products - Transparent and Opaque Liquids Determination of Kinematic Viscosity and
Calculation of Dynamic Viscosity (ISO 3104:
1994) (W)
2000 Plastics - Determination of Melting
Behaviour (Melting Temperature or Melting
Range) of Semi-Crystalline Polymers by
Capillary Tube and Polarizing-Microscope
Methods (V)
BS EN ISO 3164
BS EN ISO 3219
BS EN ISO 3248
BS EN ISO 3325
BS EN ISO 3336
BS EN ISO 3344
BS EN ISO 3382
BS EN ISO 3630-3
BS EN ISO 3251
BS EN ISO 3262-8
BS EN ISO 3262-10
BS EN ISO 3262-10
2000 Earth-Moving Machinery - Laboratory
Evaluations of Protective Structures Specifications for Deflection-Limiting
Volume Supersedes BS 6912-7: 1992; (R)
1995 Amd 1 Plastics - Polymers/ Resins in
the Liquid State or as Emulsions or
Dispersions - Determination of Viscosity
Using a Rotational Viscometer with Defined
Shear State (AMD 8630) October 15, 1995
(Also Numbered BS 2782: Part 7: Method
730B: 1994 Rep
2001 Paints and Varnishes - Determination of
the Effect of Heat Renumbers BS 3900G7:1998; (W)
1999 Sintered Metal Materials, Excluding
Hardmetals - Determination of Transverse
Rupture Strength Supersedes BS 5600-3-3.8:
1979; (V)
1996 Amd 1 Dentistry - Synthetic Polymer
Teeth (AMD 9229) September 15, 1996 (N)
1997 Reinforcement Products Determination of Moisture Content (V)
2000 Acoustics - Measurement of the
Reverberation Time of Rooms with
Reference to Other Acoustical Parameters
(R)
1997 Dental Root-Canal Instruments Part 3:
Condensers, Pluggers and Spreaders (N)
1995 Amd 1 Paints and Varnishes Determination of Non-Volatile Matter of
Paints, Varnishes and Binders for Paints and
Varnishes (AMD 8689) December 15, 1995
(Also Numbered BS 3900: Part B18: 1994)
(W)
2000 Extenders for Paints - Specifications
and Methods of Test - Part 8: Natural Clay
Together with the Other Parts of BS EN ISO
3262, It Will Supersede BS 1795: 1976; (W)
2000 Extenders for Paints - Specifications
and Methods of Test - Part 10: Natural
Talc/Chlorite in Lamellar Form Together
with the Other Parts of BS EN ISO 3262,
Will Supersede BS 1795: 1976 Which is
Declared Obsolescent; (W)
2000 Corr 1 Extenders for Paints Specifications and Methods of Test - Part 10:
BS EN ISO 3262-11
BS EN ISO 3262-11
BS EN ISO 3262-14
BS EN ISO 3262-15
BS EN ISO 3262-16
BS EN ISO 3262-16
BS EN ISO 3262-17
BS EN ISO 3262-17
Natural Talc/Chlorite in Lamellar Form
CORR 13425: October 5,2001; Together
with the Other Parts of BS EN ISO 3262,
Will Supersede BS 1795:1976 Which is
Declared Obsolescent;
2000 Extenders for Paints - Specifications
and Methods of Test - Part 11: Natural Talc,
in Lamellar Form, Containing Carbonates
Together with the Other Parts of BS EN ISO
3262, Will Supersede BS 1795: 1976 Which
is Declared Obsolescent; (W)
2000 Corr 1 Extenders for Paints Specifications and Methods of Test - Part 11:
Natural Talc, in Lamellar Form, Containing
Carbonates CORR 13424: October 5,2001;
Together with the Other Parts of BS EN ISO
3262, Will Supersede BS 1795: 1976 Which
is Decla
2000 Extenders for Paints - Specifications
and Methods of Test - Part 14: Cristobalite
Together with the Other Parts of BS EN ISO
3262, Will Supersede BS 1795: 1976 Which
is Declared Obsolescent; (W)
2000 Extenders for Paints - Specifications
and Methods of Test - Part 15: Vitreous
Silica Together with the Other Parts of BS
EN ISO 3262, Will Supersede BS 1795: 1976
Which is Declared Obsolescent; (W)
2000 Extenders for Paints - Specifications
and Methods of Test - Part 16: Aluminium
Hydroxides Together with the Other Parts of
BS EN ISO 3262, Will Supersede BS 1795:
1976 Which is Declared Obsolescent; (W)
2000 Corr 1 Extenders for Paints Specifications and Methods of Test - Part 16:
Aluminium Hydroxides CORR 11070,
September 2000; Together with the Other
Parts of BS EN ISO 3262, Will Supersede BS
1795:1976; (W)
2000 Extenders for Paints - Specifications
and Methods of Test - Part 17: Precipitated
Calcium Silicate Together with the Other
Parts of BS EN ISO 3262, it Will Supersede
BS 1795: 1976 Which is Declared
Obsolescent; (W)
2000 Corr 1 Extenders for Paints -
BS EN ISO 3650
BS EN ISO 3668
BS EN ISO 3671
BS EN ISO 3672-1
BS EN ISO 3262-18
BS EN ISO 3262-18
BS EN ISO 3262-19
BS EN ISO 3262-19
BS EN ISO 3262-20
Specifications and Methods of Test - Part 17:
Precipitated Calcium Silicate CORR 11071,
September 2000; Together with the Other
Parts of BS EN ISO 3262, it Will Supersede
BS 1795:1976; (W)
1999 Geometrical Product Specifications
(GPS) - Length Standards - Gauge Blocks
Supersedes BS 4311-1: 1993; (H)
2001 Paints and Varnishes - Visual
Comparison of the Colour of Paints
Renumbers BS 3900-D1:1998; (W)
1999 Plastics - Aminoplastic Moulding
Materials - Determination of Volatile Matter
Renumbers BS 2782: Part 4: Method 461A:
1978; (V)
2001 Plastics - Unsaturated-Polyester Resins
(UP-R) - Part 2: Designation System
Renumbers BS ISO 3672-1:2000; (V)
2000 Extenders for Paints - Specifications
and Methods of Test - Part 18: Precipitated
Sodium Aluminium Silicate Together with
the Other Parts of BS EN ISO 3262, it Will
Supersede BS 1795: 1976 Which is Declared
Obsolescent; (W)
2000 Corr 1 Extenders for Paints Specifications and Methods of Test - Part 18:
Precipitated Sodium Aluminium Silicate
CORR 11072, September 2000; Together
with the Other Parts of BS EN ISO 3262, it
Will Supersede BS 1795:1976; (W)
2000 Extenders for Paints - Specifications
and Methods of Test - Part 19: Precipitated
Silica Together with the Other Parts of BS
EN ISO 3262, it Will Supersede BS 1795:
1976 Which is Declared Obsolescent; (W)
2000 Corr 1 Extenders for Paints Specifications and Methods of Test - Part 19:
Precipitated Silica CORR 11073, September
2000; Together with the Other Parts of BS
EN ISO 3262, it Will Supersede BS
1795:1976; (W)
2000 Extenders for Paints - Specifications
and Methods of Test - Part 20: Fumed Silica
Together with the Other Parts of BS EN ISO
3262, it Will Supersede BS 1795: 1976
Which is Declared Obsolescent; (W)
BS EN ISO 3262-20
BS EN ISO 3262-21
BS EN ISO 3262-21
BS EN ISO 3630-1
BS EN ISO 3672-2
BS EN ISO 3673-1
BS EN ISO 3673-2
BS EN ISO 3675
BS EN ISO 3678
BS EN ISO 3727-1
BS EN ISO 3727-2
2000 Corr 1 Extenders for Paints Specifications and Methods of Test - Part 20:
Fumed Silica CORR 11074, September 2000;
Together with the Other Parts of BS EN ISO
3262, it Will Supersede BS 1795:1976; (W)
2000 Extenders for Paints - Specifications
and Methods of Test - Part 21: Silica Sand
(Unground Natural Quartz) Together with the
Other Parts of BS EN ISO 3262, it Will
Supersede BS 1795: 1976 Which is Declared
Obsolescent; (W)
2000 Corr 1 Extenders for Paints Specifications and Methods of Test - Part 21:
Silica Sand (Unground Natural Quartz)
CORR 11075; September 2000;
Incorporating Corrigendum No. 1; Together
with the Other Parts of BS EN ISO 3262, it
Will Supersede BS 1795:
1995 Amd 1 Dental Root-Canal Instruments
Part 1: Files, Reamers, Barbed Broaches,
Rasps, Paste Carriers, Explorers and Cotton
Broaches (AMD 8632) May 15, 1995
(Formerly Replaces BS 6815: Part 1: 1993,
Replaces BS 6815: 1987 and BS 6815-1:
1993) (N)
2001 Plastics - Unsaturated-Polyester Resins
(UP-R) - Part 2: Preparation of Test
Specimens and Determination of Properties
Renumbers BS ISO 3672-2:2000; (V)
2000 Plastics - Epoxy Resins Part 1:
Designation Renumbers BS ISO 3673-1:
1996; (V)
2000 Plastics - Epoxy Resins - Part 2:
Preparation of Test Specimens and
Determination of Properties (V)
1996 Crude Petroleum and Liquid Petroleum
Products - Laboratory Determination of
Density or Relative Density - Hydrometer
Method (Replaces BS 4714: 1980) (W)
1995 Paints and Varnishes - Print-Free Test
Renumbers BS 3900: Part C8: 1978; (W)
2002 Butter - Determination of Moisture,
Non-Fat Solids and Fat Contents - Part 1:
Determination of Moisture Content
(Reference Method) (W)
2002 Butter - Determination of Moisture,
BS EN ISO 3735
BS EN ISO 3690
BS EN ISO 3696
BS EN ISO 3727-1
BS EN ISO 3727-2
BS EN ISO 180
BS EN ISO 183
BS EN ISO 60
BS EN ISO 60
BS EN ISO 61
Non-Fat Solids and Fat Contents - Part 2:
Determination of Non-Fat Solids Content
(Reference Method) (W)
1996 Amd 1 Crude Petroleum and Fuel Oils Determination of Sediment - Extraction
Method (AMD 8898) March 15, 1996 (W)
2001 Corr 1 Welding and Allied Processes Determination of Hydrogen Content in
Ferritic Steel Arc Weld Metal CORR 13119:
April 2001; Supersedes BS 6693-1:1986, BS
6693-2: 1986, BS 6693-3: 1988, BS 6693-4:
1998 and BS 6693-5: 1998; (F)
1995 Amd 1 Water for Analytical Laboratory
Use - Specification and Test Methods (AMD
8807) September 15, 1995 (Formerly BS
3978: 1987, Replaces BS 3978: 1966) (W)
2002 Corr 1 Butter - Determination of
Moisture, Non-Fat Solids and Fat Contents Part 1: Determination of Moisture Content
(Reference Method) CORR 13773: March
15, 2002; (W)
2002 Corr 1 Butter - Determination of
Moisture, Non-Fat Solids and Fat Contents Part 2: Determination of Non-Fat Solids
Content (Reference Method) CORR 13772:
March 15, 2002; (W)
2001 Plastics - Determination of Izod Impact
Strength (V)
2000 Plastics - Qualitative Evaluation of the
Bleeding of Colorants (V)
2000 Plastics - Determination of Apparent
Density of Material That Can Be Poured
from a Specified Funnel Renumbers BS
2782-6: Method 621A: 1978; Replaces
Method 501A of BS 2782: 1970; (V)
2000 Corr 1 Plastics - Determination of
Apparent Density of Material That Can Be
Poured from a Specified Funnel Renumbers
BS 2782-6: Method 621A: 1978; Replaces
Method 501A of BS 2782: 1970; AMD
10680; January 2000; CORR 10854;
February 2000; (V)
2000 Plastics - Determination of Apparent
Density of Moulding Material That Cannot
Be Poured from a Specified Funnel
Renumbers BS 2782-6: Method 621B: 1978;
BS EN ISO 62
BS EN ISO 75-1
BS EN ISO 75-2
BS EN ISO 75-3
BS EN ISO 90-1
BS EN ISO 90-2
BS EN ISO 90-3
BS EN ISO 105-A01
BS EN ISO 105-A05
BS EN ISO 105-A06
BS EN ISO 105-E10
BS EN ISO 105-A01
(V)
1999 Plastics - Determination of Water
Absorption Supersedes BS 2782-4: Methods
430A to 430D: 1983; (V)
1996 Amd 1 Plastics - Determination of
Temperature of Deflection Under Load Part
1: General Test Method (ISO 75-1: 1993)
(AMD 8647) July 15, 1996 (V)
1996 Amd 1 Plastics - Determination of
Temperature of Deflection Under Load Part
2: Plastics and Ebonite (ISO 75-2: 1993)
(AMD 8646) July 15, 1996 (V)
1996 Amd 1 Plastics - Determination of
Temperature of Deflection Under Load Part
3: High-Strength Thermosetting Laminates
and Long-Fibre- Reinforced Plastics (ISO 753: 1993) (AMD 8645) July 15, 1996 (V)
1999 Light Guage Metal Containers Definitions and Determination of Dimensions
and Capacities - Part 1: Open-Top Cans
Supersedes BS EN 20090-1: 1993; (H)
1999 Light Guage Metal Containers Definitions and Determination of Dimensions
and Capacities - Part 2: General Use
Containers ISO 90-2: 1997; Supersedes BS
EN 20090-2: 1993; (H)
2001 Light Guage Metal Containers Definitions and Determination of Dimensions
and Capacities - Part 3: Aerosol Cans
Supersedes BS EN 20090-3:1993; (H)
1996 Textiles - Tests for Colour Fastness Part
A01: General Principles of Testing (L)
1997 Textiles - Test for Colour Fastness Part
A05: Instrumental Assessment of Change of
Colour for Determination of Gray Scale
Rating (L)
1997 Textiles - Test for Colour Fastness Part
A06: Instrumental Determination of 1/1
Standard Depth of Colour (L)
1997 Textiles - Tests for Colour Fastness Part
E10: Colour Fastness to Decatizing (L)
1996 Amd 1 Textiles - Tests for Colour
Fastness - Part A01: General Principles of
Testing AMD 10478; July 1999; Supersedes
BS EN 20105-A01: 1993 and the
Corresponding Method in BS 1006: 1990;
BS EN ISO 105-B02
BS EN ISO 105-B02
BS EN ISO 105-B03
BS EN ISO 105-B04
BS EN ISO 105-C06
BS EN ISO 105-E11
BS EN ISO 105-E12
BS EN ISO 105-E13
BS EN ISO 105-E14
BS EN ISO 105-G02
(L)
1999 Corr 2 Textiles - Tests for Colour
Fastness - Part B02: Colour Fastness to
Artificial Light: Xenon Arc Fading Lamp
Test CORR 13140:April 2001; Partially
Supersedes BS 1006:1990 and Supersedes
BS EN 20105-B02:1993; (L)
1999 Corr 1 Textiles - Tests for Colour
Fastness - Part B02: Colour Fastness to
Artificial Light: Xenon Arc Fading Lamp
Test CORR 10855; March 2000; Partially
Supersedes BS 1006: 1990 and Also
Supersedes BS EN 20105-B02: 1993; (L)
1997 Textiles - Tests for Colour Fastness Part
B03: Colour Fastness to Weathering:
Outdoor Exposure Supersedes the
Corresponding Method in BS 1006: 1990
Which is Withdrawn by Amendment; (L)
1997 Textiles - Tests for Colour Fastness Part
B04: Colour Fastness to Artificial
Weathering: Xenon Arc Fading Lamp Test
Supersedes the Corresponding Method in BS
1006: 1990 Which is Withdrawn by
Amendment; (L)
1997 Textiles - Tests for Colour Fastness Part
C06: Colour Fastness to Domestic and
Commercial Laundering Supersedes BS EN
20105-C06: 1993 and BS 1006: 1990 Which
is Withdrawn by Amendment, (L)
1997 Textiles - Tests for Colour Fastness Part
E11: Colour Fastness to Steaming Supersedes
BS 1006: 1990; (L)
1997 Textiles - Tests for Colour Fastness Part
E12: Colour Fastness to Milling: Alkaline
Milling Supersedes the Relevant Method in
BS 1006: 1990 Which is Withdrawn by
Amendment; (L)
1997 Textiles - Tests for Colour Fastness Part
E13: Colour Fastness to Acid-Felting: Severe
Supersedes BS 1006: 1990; (L)
1997 Textiles - Test for Colour Fastness Part
E14: Colour Fastness to Acid-Felting: Mild
Supersedes BS 1006: 1990; (L)
1997 Textiles - Tests for Colour Fastness Part
G02: Colour Fastness to Burnt-Gas Fumes
Supersedes the Relevant Method in BS 1006:
BS EN ISO 105-G03
BS EN ISO 105-J01
BS EN ISO 105-J02
BS EN ISO 105-J03
BS EN ISO 105-X01
BS EN ISO 105-X02
BS EN ISO 105-X11
BS EN ISO 105-Z06
BS EN ISO 105-X04
BS EN ISO 105-X05
BS EN ISO 105-X06
BS EN ISO 105-X07
1990 Which is Withdrawn by Amendment;
(L)
1997 Textiles - Tests for Colour Fastness Part
G03: Colour Fastness to Ozone in the
Atmosphere Supersedes the Relevant Method
in BS 1006: 1990 Which is Withdrawn by
Amendment; (L)
2000 Textiles - Tests for Colour Fastness Part J01: General Principles for Measurement
of Surface Colour Supersedes Method J01 of
BS 1006: 1990; (L)
2000 Textiles - Tests for Colour Fastness Part J02: General Principles for Measurement
of Surface Colour Supersedes Method J02 of
BS 1006: 1990; (L)
1997 Textiles - Tests for Colour Fastness Part
J03: Calculation of Colour Differences (L)
1996 Textiles - Tests for Colour Fastness Part
X01: Colour Fastness to Carbonizing:
Aluminium Chloride (L)
1996 Textiles - Tests for Colour Fastness Part
X02: Colour Fastness to Carbonizing:
Sulfuric Acid (L)
1996 Textiles - Tests for Colour Fastness Part
X11: Colour Fastness to Hot Pressing (L)
2000 Textiles - Tests for Colour Fastness Part Z06: Evaluation of Dye and Pigment
Migration (L)
1997 Textiles - Tests for Colour Fastness Part
X04: Colour Fastness to Mercerizing
Supersedes the Relevent Method in BS 1006:
1990 Which is Withdrawn by Amendment;
(L)
1997 Textiles - Tests for Colour Fastness Part
X05: Colour Fastness to Organic Solvents
Supersedes the Relevent Method in BS 1006:
1990 Which is Withdrawn by Amendment;
(L)
1997 Textiles - Tests for Colour Fastness Part
X06: Colour Fastness to Soda Boiling
Supersedes the Relevant Method in BS 1006:
1990 Which is Withdrawn by Amendment;
(L)
1997 Textiles - Tests for Colour Fastness Part
X07: Colour Fastness to Cross-Dyeing: Wool
Supersedes the Relevant Method in BS 1006:
BS EN ISO 105-X08
BS EN ISO 105-X13
BS EN ISO 105-X14
BS EN ISO 105-Z10
BS EN ISO 105-Z11
BS EN ISO 140-12
BS EN ISO 175
BS EN ISO 389-4
BS EN ISO 483
BS EN ISO 489
1990 Which is Withdrawn by Amendment;
(L)
1997 Textiles - Tests for Colour Fastness Part
X08: Colour Fastness to Degumming
Supersedes the Relevant Method in BS 1006:
1990 Which is Withdrawn by Amendment;
(L)
1997 Textiles - Tests for Colour Fastness Part
X13: Colour Fastness of Wool Dyes to
Processes Using Chemical Means for
Creasing, Pleating and Setting Supersedes the
Relevant Method in BS 1006: 1990 Which is
Withdrawn by Amendment; (L)
1997 Textiles - Tests for Colour Fastness Part
X14: Colour Fastness to Acid Chlorination of
Wool: Sodium Dichloroisocyanurate
Supersedes the Relevant Method in BS 1006X14: 1990 Which in Withdrawn by
Amendment; (L)
1999 Textiles - Tests for Colour Fastness Part Z10: Determination of Relative Colour
Strength of Dyes in Solution (L)
2001 Textiles - Tests for Colour Fastness Part Z 11: Evaluation of Speckiness of
Colorant Dispersions (L)
2000 Acoustics - Measurement of Sound
Insulation in Buildings and of Building
Elements - Part 12: Laboratory Measurement
of Room-To-Room Airborne and Impact
Sound Insulation of an Access Floor (R)
2001 Plastics - Methods of Test for the
Determination of the Effects of Immersion in
Liquid Chemicals Renumbers BS 27828:Method 830A:1999; (V)
1999 Acoustics - Reference Zero for the
Calibration of Audiometric Equipment - Part
4: Reference Levels for Narrow-Band
Masking Noise Renumbers BS ISO 389-4 :
1994; (F)
1999 Plastics - Small Enclosures for
Conditioning and Testing Using Aqueous
Solutions to Maintain Relative Humidity at
Constant Value (V)
1999 Plastics - Determination of Refractive
Index Also Numbered as BS 2782-5: Method
531A: 1999; Supersedes BS 2782-5: Method
BS EN ISO 505
BS EN ISO 527-1
BS EN ISO 536
BS EN ISO 542
BS EN ISO 583-1
BS EN ISO 527-2
BS EN ISO 527-4
BS EN ISO 527-5
BS EN ISO 585
BS EN ISO 591-1
BS EN ISO 591-1
531A: 1992; (V)
2000 Conveyor Belts - Method for the
Determination of the Tear Propagation
Resistance of Textile Conveyor Belts (Q)
1996 Amd 1 Plastics - Determination of
Tensile Properties Part 1: General Principles
(ISO 527-1: 1993) (AMD 8633) July 15,
1996 (V)
1997 Amd 1 Paper and Board Determination of Grammage Renumbering
BS ISO 536: 1995; AMD 9309 February 15,
1997; (H)
1995 Amd 1 Oilseeds - Sampling (AMD
8671) July 15, 1995 (Formerly BS 4146:
1991 Replaces BS 4146: 1981) (W)
2000 Conveyor Belts with a Textile Carcass Total Thickness and Thickness of Elements Part 1: Methods of Test Supercedes BS 49010.3:1984; (Q)
1996 Plastics - Determination of Tensile
Properties - Part 2: Test Conditions for
Moulding and Extrusion Plastics Together
with BS 2782: Method 321: 1993 it
Supersedes Methods 320A and 320B given in
BS 2782: Methods 320A to 320F: 1976
Which Are Deleted by
1997 Plastics - Determination of Tensile
Properties Part 4: Test Conditions for
Isotropic and Orthotropic Fibre-Reinforced
Plastic Composites Also Numbered as BS
2782: PT 3: METH 326F: 1997; (V)
1997 Plastics - Determination of Tensile
Properties Part 5: Test Conditions for
Unidirectional Fibre-Reinforced Plastic
Composites Also Numbered as BS 2782: PT
3: METH 326G: 1997; (V)
1999 Plastics - Unplasticized Cellulose
Acetate - Determination of Moisture Content
Renumbers BS 2782-4: Meth 431C:1991; (V)
2000 Titanium Dioxide Pigments for Paints Part 1: Specifications and Methods of Test
Supersedes BS 1851:1978; (W)
2000 Corr 1 Titanium Dioxide Pigments for
Paints - Part 1: Specifications and Methods of
Test CORR 13423: October 5,2001;
Supersedes BS 1851:1978; (W)
BS EN ISO 595-2
BS EN ISO 604
BS EN ISO 613
BS EN ISO 662
BS EN ISO 683-17
BS EN ISO 694
BS EN ISO 703-1
BS EN ISO 707
BS EN ISO 717-1
BS EN ISO 717-2
BS EN ISO 734-1
BS EN ISO 734-2
BS EN ISO 748
1995 Amd 1 Reusable All-Glass or Metaland-Glass Syringes for Medical Use Part 2:
Design, Performance Requirements and Tests
(AMD 8542) January 15, 1995 (Formerly BS
1263: Part 2: 1989 Replaces BS 1263: 1946
(N)
1997 Plastics - Determination of
Compressive Properties Renumbers BS 2782:
Method 345A: 1993; (V)
2001 Ships and Marine Technology Magnetic Compasses, Binnacles and
Azimuth Reading Devices - Class B
Renumbers BS ISO 613:2000; (Q)
2001 Animal and Vegetable Fats and Oils Determination of Moisture and Volatile
Matter Content Renumbers BS 6841.10:1998; (W)
1999 Heat-Treated Steels, Alloy Steels and
Free-Cutting Steels - Part 17: Ball and Roller
Bearing Steels (V)
2001 Ships and Marine Technology Positioning of Magnetic Compasses in Ships
Renumbers BS ISO 694:2000; (Q)
2000 Conveyor Belts - Transverse Flexibility
and Troughability - Part 1: Test Method
Supersedes BS 490-10.6:1983; (Q)
1997 Milk and Milk Products - Guidance on
Sampling Supersedes BS 809: 1985; (W)
1997 Acoustics - Rating of Sound Insulation
in Buildings and of Building Elements Part 1:
Airborne Sound Insulation Supersedes BS
5821: Part 1: 1984; (R)
1997 Acoustics - Rating of Sound Insulation
in Buildings and of Building Elements Part 2:
Impact Sound Insulation Supersedes BS
5821: Part 2: 1984; (R)
2001 Oilseed Residues - Determination of
Oil Content - Part 1: Extraction Method with
Hexane (or Light Petroleum) Renumbers BS
4325-4: 1999: (W)
2001 Oilseed Residues - Determination of
Oil Content - Part 2: Rapid Extraction
Method Renumbers BS 4325-13: 1999: (W)
Measurement of Liquid Flow in Open
Channels - Velocity-Area Methods
Supersedes BS ISO 748:1997; (H)
BS EN ISO 772
BS EN ISO 1873-2
BS EN ISO 787-2
BS EN ISO 1872-2
BS EN ISO 1873-2
BS EN ISO 1874-1
BS EN ISO 1874-2
BS EN ISO 1886
BS EN ISO 1889
BS EN ISO 1924-2
BS EN ISO 4032
BS EN ISO 4033
BS EN ISO 4042
BS EN ISO 5555
2001 Hydrometric Determinations Vocabulary and Symbols Supersedes BS
3680 Part 1:1991; (E)
1997 Plastics - Polypropylene (PP) Moulding
and Extrusion Materials Part 2: Preparation
of Test Specimens and Determination of
Properties (V)
1995 Amd 1 General Methods of Test for
Pigments and Extenders Part 2:
Determination of Matter Volatile at 105
Degrees C (AMD 8506) August 15, 1995
(Formerly BS 3483: Part B6: 1982) (W)
1997 Amd 1 Plastics - Polyethylene (PE)
Moulding and Extrusion Materials - Part 2:
Preparation of Test Specimens and
Determination of Properties AMD
12040:June 2001; (V)
1997 Amd 1 Plastics - Polypropylene (PP)
Moulding and Extrusion Materials - Part 2:
Preparation of Test Specimens and
Determination of Properties AMD
12039:June 2001; (V)
2001 Plastics - Polyamide (PA) Moulding
and Extrusion Materials - Part 1: Designation
ISO 1874-1:1992; (V)
1996 Plastics - Polyamide (PA) Moulding
and Extrusion Materials Part 2: Preparation
of Test Specimens and Determination of
Properties (V)
1995 Reinforcement Fibres - Sampling Plans
Applicable to Received Batches (Also
Numbered BS 2782: Part 10: Method 1007:
1995) (V)
1997 Reinforcement Yarns - Determination
of Linear Density (V)
1995 Paper and Board - Determination of
Tensile Properties Part 2: Constant Rate of
Elongation Method (Replaces BS 4415: Part
2: 1986) (N)
2001 Hexagon Nuts, Style 1 - Product Grades
A and B Supersedes BS EN 24032:1992; (E)
2001 Hexagon Nuts, Style 2 - Product Grades
A and B Supersedes BS EN 24033:1992; (E)
2000 Fasteners - Electroplated Coatings
Supersedes BS 7371-3: 1993; (E)
2002 Animal and Vegetable Fats and Oils -
BS EN ISO 7048
BS EN ISO 4049
BS EN ISO 4063
BS EN ISO 4066
BS EN ISO 4066
BS EN ISO 5470-1
BS EN ISO 5508
BS EN ISO 5509
BS EN ISO 5511
BS EN ISO 5555
BS EN ISO 5659-1
BS EN ISO 5511
BS EN ISO 7048
Sampling (W)
1999 Cross Recessed Cheese Head Screws
(E)
2000 Dentistry - Polymer-Based Filling,
Restorative and Luting Materials Supersedes
BS EN 24049: 1992; (N)
2000 Welding and Allied Processes Nomenclature of Processes and Reference
Numbers Supersedes BS EN 24063: 1992;
(F)
2000 Construction Drawings - Bar
Scheduling Partially Supersedes BS 4466:
1989; (R)
2000 Corr 1 Construction Drawings - Bar
Scheduling CORR 11097; September 2000;
Partially Supersedes BS 4466: 1989; (R)
1999 Rubber- or Plastics-Coated Fabrics Determination of Abrasion Resistance - Part
1: Taber Abrader (L)
1995 Amd 1 Animal and Vegetable Fats and
Oils - Analysis by Gas Chromatography of
Methyl Esters of Fatty Acids (AMD 8672)
July 15, 1995 (Also Numbered as BS 627:
Section 2.35: 1990, Replaces 684-2-35:
1980) (W)
2001 Animal and Vegetable Fats and Oils Preparation of Methyl Esters of Fatty Acids
Supersedes BS 684-2.34: 1980; Also Known
as BS 684-2.34: 2001; (W)
1997 Oilseeds - Determination of Oil Content
- Method Using Continuous-Wave LowResolution Nuclear Magnetic Resonance
Spectrometry (Rapid Method) (W)
2002 Corr 1 Animal and Vegetable Fats and
Oils - Sampling CORR 13755: March 6,
2002; (W)
1999 Amd 1 Plastics - Smoke Generation Part 1: Guidance on Optical-Density Testing
AMD 10628; November 1999; Renumbers
BS ISO 5659-1:1996;(V)
1997 Amd 1 Oilseeds - Determination of Oil
Content - Method Using Continuous-Wave
Low-Resolution Nuclear Magnetic
Resonance Spectrometry (Rapid Method)
AMD 9642; November 15, 1997; (W)
1999 Amd 1 Cross Recessed Cheese Head
BS EN ISO 7089
BS EN ISO 7090
BS EN ISO 7091
BS EN ISO 7085
BS EN ISO 8662-13
BS EN ISO 8662-14
BS EN ISO 8669-2
BS EN ISO 8670-2
BS EN ISO 11064-3
BS EN ISO 1401
BS EN ISO 8689-1
BS EN ISO 8689-2
BS EN ISO/ IEC 9314-3
BS EN ISO 9337-1
Screws AMD 10506; July 1999; (E)
2000 Plain Washers - Normal Series Product Grade A (E)
2000 Plain Washers, Chamfered - Normal
Series - Product Grade A (E)
2000 Plain Washers - Normal Series Products Grade C (E)
1999 Mechanical and Performance
Requirements of Case Hardened and
Tempered Metric Thread Rolling Screws (E)
1997 Hand-Held Portable Power Tools Measurement of Vibrations at the Handle
Part 13 : Die Grinders (F)
1997 Hand-Held Portable Tools Measurement of Vibrations at the Handle
Part 14: Stone-Working Tools and Needle
Scalers (F)
1997 Urine Collection Bags Part 2:
Requirements and Test Methods Supersedes
BS 7126: Part 2: 1989 and BS 7126: Part
101: 1991; (N)
1997 Ostomy Collection Bags - Part 2:
Requirements and Test Methods Supersedes
BS 7127: Part 101: 1992; (N)
2000 Ergonomic Design of Control Centres Part 3: Control Room Layout (G)
2000 Rubber Hoses for Agricultural Spraying
(E)
2000 Water Quality - Biological
Classification of Rivers - Part 1: Guidance on
the Interpretation of Biological Quality Data
from Surveys of Benthic Macroinvertebrates
BS 6068-5.26: 2000; (N)
2000 Water Quality - Biological
Classification of Rivers - Part 2: Guidance on
the Presentation of Biological Quality Data
from Surveys of Benthic Macroinvertebrates
BS 6068-5.27: 2000; (N)
1996 Amd 1 Information Processing Systems
- Fibre Distributed Data Interface (FDDI) Part 3: Physical Layer Medium Dependent
(PMD) (AMD 9267) November 15, 1996 (S)
2001 Contact Lenses - Determination of
Back Vertex Power - Part 1: Method Using
Focimeter with Manual Focusing Renumbers
BS ISO 9337-1:1999; (N)
BS EN ISO 9340
BS EN ISO 9346
BS EN ISO 9360-1
BS EN ISO 11064-2
BS EN ISO 11064-3
BS EN ISO 11070
BS EN ISO 11111
BS EN ISO 11114-2
BS EN ISO 9363-1
BS EN ISO 787-5
BS EN ISO 787-9
BS EN ISO 787-10
1999 Optics and Optical Instruments Contact Lenses - Determination of Strains for
Rigid Contact Lenses Also Numbered as BS
7208-9: 1999; (N)
1996 Thermal Insulation - Mass Transfer Physical Quantities and Definitions (F)
2000 Anaesthetic and Respiratory Equipment
- Heat and Moisture Exchangers (HMEs) for
Humidifying Respired Gases in Humans Part 1: HMEs for Use with Minimum Tidal
Volumes of 250 ml (N)
2001 Ergonomic Design of Control Centres Part 2: Principles for the Arrangement of
Control Suites (G)
2000 Corr 1 Ergonomic Design of Control
Centres - Part 3: Control Room Layout
CORR 12057: November 2000; (G)
1999 Sterile, Single-Use Intravascular
Catheter Introducers Supersedes BS 7174-4:
1990; (N)
1996 Safety Requirements for Textile
Machinery (L)
2001 Transportable Gas Cylinders Compatibility of Cylinder and Valve
Materials with Gas Contents - Part 2: NonMetallic Materials (H)
1999 Optics and Optical Instruments Contact Lenses - Determination of
Cytotoxicity of Contact Lens Material - Part
1: Agar Overlay Test and Growth Inhibition
Test (N)
1995 Amd 1 General Methods of Test for
Pigments and Extenders Part 5:
Determination of Oil Absorption Value
(AMD 8687) December 15, 1995 (Formerly
BS 3483: Part B7: 1982) (W)
1995 Amd 1 General Methods of Test for
Pigments and Extenders Part 9:
Determination of pH Value of Aqueous
Suspension (AMD 8512) August 15, 1995
(Formerly BS 3483: Part C4: 1982) (W)
1995 Amd 1 General Methods of Test for
Pigments and Extenders Part 10:
Determination of Density - Pyknometer
Method (AMD 8686) December 15, 1995
(Formerly BS 3483: Part B8: 1993 Replaces
BS EN ISO 787-11
BS EN ISO 787-15
BS EN ISO 787-16
BS EN ISO 787-23
BS EN ISO 787-24
BS EN ISO 801-1
BS EN 61347-2-3
BS EN 61347-2-4
BS EN 61347-2-5
BS 3483: Part B8: 1982) (W)
1995 Amd 1 General Methods of Test for
Pigments and Extenders Part 11:
Determination of Tamped Volume and
Apparent Density After Tamping (AMD
8685) December 15, 1995 (Formerly BS
3483: Part B10: 1982) (W)
1995 Amd 1 General Methods of Test for
Pigments and Extenders Part 15: Comparison
of Resistance to Light of Coloured Pigments
of Similar Types (AMD 8684) December 15,
1995 (Formerly BS 3483: Part A3: 1988
Replaces BS 3483: Part A3: 1974) (W)
1995 Amd 1 General Methods of Test for
Pigments and Extenders Part 16:
Determination of Relative Tinting Strength
(or Equivalent Colouring Value) and Colours
on Reduction of Coloured Pigments - Visual
Comparison Method (AMD 8683) December
15, 1995 (Former
1995 Amd 1 General Methods of Tests for
Pigments and Extenders Part 23:
Determination of Density (Using a
Centrifuge to Remove Entrained Air) (AMD
8682) December 15, 1995 (Formerly BS
3483: Part B9: 1980) (W)
1995 Amd 1 General Methods of Test for
Pigments and Extenders Part 24:
Determination of Relative Tinting Strength of
Coloured Pigments and Relative Scattering
Power of White Pigments - Photometric
Methods (AMD 8681) December 15, 1995
(Read in Conjunction
1997 Amd 1 Pulps - Determination of
Saleable Mass in Lots Part 1: Pulp Baled in
Sheet Form AMD 9410 March 15, 1997;
Renumbering BS 4747 : Part 1 : 1995; (H)
2001 Lamp Controlgear - Part 2-3: Particular
Requirements for A.C. Supplied Electronic
Ballasts for Fluorescent Lamps IEC 61347-23:2000; (E)
2001 Lamp Controlgear - Part 2-4: Particular
Requirements for D.C. Supplied Electronic
Ballasts for General Lighting IEC 61347-24:2000; (E)
2001 Lamp Controlgear - Part 2-5: Particular
BS EN 61347-2-6
BS EN 61347-2-7
BS EN 61347-2-8
BS EN 61347-2-9
BS EN 61347-2-10
BS EN 61347-2-11
BS EN 61362
BS EN 61378-2
BS EN 61400-2
BS EN 61479
BS EN 61496-3
BS EN 61508-1
Requirements for D.C. Supplied Electronic
Ballasts for Public Transport Lighting IEC
61347-2-5:2000; (E)
2001 Lamp Controlgear - Part 2-6: Particular
Requirements for D.C. Supplied Electronic
Ballasts for Aircraft Lighting IEC 61347-26:2000; (E)
2001 Lamp Controlgear - Part 2-7: Particular
Requirements for D.C. Supplied Electronic
Ballasts for Emergency Lighting IEC 613472-7:2000; (E)
2001 Lamp Controlgear - Part 2-8: Particular
Requirements for Ballasts for Fluorescent
Lamps IEC 61347-2-8:2000; (E)
2001 Lamp Controlgear - Part 2-9: Particular
Requirements for Ballasts for Discharge
Lamps (Excluding Fluorescent Lamps) IEC
61347-2-9:2000; (E
2001 Lamp Controlgear - Part 2-10:
Particular Requirements for Electronic
Invertors and Convertors for High-Frequency
Operation of Cold Tubular Discharge Lamps
(Neon Tubes) IEC 61347-2-10:2000; (E)
2002 Lamp Controlgear - Part 2-11:
Particular Requirements for Miscellaneous
Electronic Circuits Used with Luminaries
IEC 61347-2-11: 2001; (E)
1998 Guide to Specification of Hydroturbine
Control Systems (G)
2001 Convertor Transformers - Part 2:
Transformers for HVDC Applications IEC
61378-2:2001; (Q)
1996 Wind Turbine Generator Systems Part
2: Safety of Small Wind Turbines IEC 14002: 1996; (Q)
2001 Live Working - Flexible Conductor
Covers (Line Hoses) of Insulating Material
IEC 61479:2001; (F)
2001 Safety of Machinery - Electro-Sensitive
Protective Equipment Part 3: Particular
Requirements for Active Opto-Electronic
Protective Devices Responsive to Diffuse
Reflection (AOPDDR) IEC 61496-3:2001;
(F)
2002 Functional Safety of
Electrical/Electronic/Programmable
BS EN 61508-2
BS EN 61508-3
BS EN 61508-4
BS EN 61508-5
BS EN 61508-6
BS EN 61508-7
BS EN 61518
BS EN 61523-1
BS EN 61549
Electronic Safety-Related Systems - Part 1:
General Requirements Renumbers BS IEC
61508-1: 1998; (S)
2002 Functional Safety of
Electrical/Electronic/Programmable
Electronic Safety-Related Systems - Part 2:
Requirements for
Electrical/Electronic/Programmable
Electronic Safety-Related Systems
Renumbers BS IEC 61508-2: 2000; (S)
2002 Functional Safety of
Electrical/Electronic/Programmable
Electronic Safety-Related Systems - Part 3:
Software Requirements Renumbers BS IEC
61508-3: 1998; (S)
2002 Functional Safety of
Electrical/Electronic/Programmable
Electronic Safety-Related Systems - Part 4:
Definitions and Abbreviations Renumbers
BS IEC 61508-4: 1998; (S)
2002 Functional Safety of
Electrical/Electronic/Programmable
Electronic Safety-Related Systems - Part 5:
Example of Methods for the Determination
of Safety Integrity Levels Renumbers BS
IEC 61508-5: 1998; (S)
2002 Functional Safety of
Electrical/Electronic/Programmable
Electronic Safety-Related Systems - Part 6:
Guidelines on the Application of IEC 615082 and IEC 61508-3 Renumbers BS IEC
61508-6: 2000; (S)
2002 Functional Safety of
Electrical/Electronic/Programmable
Electronic Safety-Related Systems - Part 7:
Overview of Techniques and Measures
Renumbers BS IEC 61508-7: 2000; (S)
2001 Mating Dimensions between
Differential Pressure (Type) Measuring
Instruments and Flanged-On Shut-Off
Devices Up to 413 Bar (41,3 MPa) IEC
61518:2001; (H)
2002 Delay and Power Calculation Standards
- Part 1: Integrated Circuit Delay and Power
Calculation Systems IEC 61523-1: 2001; (S)
1996 Amd 1 Miscellaneous Lamps AMD
BS EN 61580-1
BS EN 61580-2
BS EN 61580-6
BS EN 61580-7
BS EN 61557-1
BS EN 61557-2
BS EN 61557-3
BS EN 61557-10
BS EN 61558-2-3
9784; January 1998; IEC 61549: 1996; (E)
1997 Methods of Measurement for
Waveguides Part 1: Decoupling and Rotation
of the Plane of Polarization IEC 1580-1:
1996; (S)
1997 Methods of Measurement for
Waveguides Part 2: Level of Intermodulation
Products IEC 1580-2: 1996; (S)
1997 Methods of Measurement for
Waveguides Part 6: Return Loss On
Waveguide and Waveguide Assemblies IEC
61580: 1995; (S)
1997 Methods of Measurement for
Waveguides Part 7: Graphical Method for the
Determination of Waveguide Performance
IEC 1580-7: 1996; (S)
1997 Electrical Safety in Low Voltage
Distribution Systems up to 1000 V a.c. and
1500 V d.c. - Equipment for Testing,
Measuring or Monitoring of Protective
Measures Part 1: General Requirements IEC
61557-1: 1997; (S)
1997 Electrical Safety in Low Voltage
Distribution Systems up to 1000 V a.c. and
1500 V d.c. - Equipment for Testing,
Measuring or Monitoring of Protective
Measures Part 2: Insulation Resistance IEC
61557-2: 1997; (E)
1997 Electrical Safety in Low Voltage
Distribution Systems up to 1000 V a.c. and
1500 V d.c. - Equipment for Testing,
Measuring or Monitoring of Protective
Measures Part 3: Loop Impedance IEC
61557-3: 1997; (E)
2001 Electrical Safety in Low Voltage
Distribution Systems Up to 1000 V A.C. and
1500 V D.C. - Equipment for Testing,
Measuring or Monitoring of Protective
Measures - Part 10: Combined Measuring
Equipment for Testing, Measuring or
Monitoring of Protective
2000 Safety of Power Transformers, Power
Supply Units and Similar Devices - Part 2-3:
Particular Requirements for Ignition
Transformers for Gas and Oil Burners IEC
61558-2-3: 1999; (E)
BS EN 61558-2-12
BS EN 61558-2-13
BS EN 61558-2-15
BS EN 61558-2-19
BS EN 61558-2-20
BS EN 61558-2-23
BS EN 61580-8
BS EN 61580-9
BS EN 61587-1
BS EN 61587-2
2001 Safety of Power Transformers, Power
Supply Units and Similar Devices - Part 212: Particular Requirements for Constant
Voltage Transformers IEC 61558-2-12:2001;
(E)
2000 Safety of Power Transformers, Power
Supply Units and Similar Devices - Part 213: Particular Requirements for AutoTransformers for General Use IEC 61558-213: 1999; (E)
2001 Safety of Power Transformers, Power
Supply Units and Similar - Part 2-15:
Particular Requirements for Isolating
Transformers for the Supply of Medical
Locations (E)
2001 Safety of Power Transformers, Power
Supply Units and Similar Devices - Part 219: Particular Requirements for Perturbation
Attenuation Transformers IEC 61558-219:2000; (E)
2001 Safety of Power Transformers, Power
Supply Units and Similar Devices - Part 220: Particular Requirements for Small
Reactors IEC 61558-2-20: 2000; (E)
2001 Safety of Power Transformers, Power
Supply Units and Similar Devices - Part 223: Particular Requirements for Transformers
for Construction Sites IEC 61558-2-23: 2000;
(E)
1997 Methods of Measurement for
Waveguides Part 8: Waveguide Power
Holding Capability IEC 1580-8: 1996; (S)
1997 Methods of Measurement for
Waveguides Part 9: Reflection Coefficient at
Rectangular Waveguide Interfaces IEC 15809: 1996; (S)
2000 Mechanical Structures for Electronic
Equipment - Tests for IEC 60917 and IEC
60297 - Part 1: Climatic, Mechanical Tests
and Safety Aspects for Cabinets, Racks,
Subracks and Chassis IEC 61587-1: 1999;
(S)
2001 Mechanical Structures for Electronic
Equipment - Tests for IEC 60917 and IEC
60297 Part 2: Seismic Tests for Cabinets and
Racks IEC 61587-2:2000; (S)
BS EN 61591
BS EN 61595-1
BS EN 61603-1
BS EN 61595-3
BS EN 61603-2
BS EN 61606
BS EN 61609
BS EN 61610
BS EN 61620
BS EN 61628-2
BS EN 61631
BS EN 61643-21
1997 Household Range Hoods - Methods for
Measuring Performance IEC 61591: 1997;
(L)
1997 Multichannel Digital Audio Tape
Recorder (DATR), Reel-To-Reel System, for
Professional Use Part 1: Format A IEC
61595-1: 1997; (S)
1997 Transmission of Audio and/or Video
and Related Signals Using Infra-Red
Radiation Part 1: General Supersedes BS
6418: 1983; IEC 61603-1: 1997; (S)
2000 Multichannel Digital Audio Tape
Recorder (DATR), Reel-To-Reel System, for
Professional Use Part 3: 24-Bit Operation for
16-Bit Media IEC 61595-3: 1999; (S)
1997 Transmission of Audio and/or Video
and Related Signals Using Infra-Red
Radiation Part 2: Transmission Systems for
Audio Wide Band and Related Signals IEC
61603-2: 1997; (S)
1997 Audio and Audiovisual Equipment Digital Audio Parts - Basic Methods of
Measurement of Audio Characteristics IEC
61606: 1997; (S)
1999 Microwave Ferrite Components - Guide
for the Drafting of Specifications IEC 61609:
1996; (E)
1996 Prints and Transparencies Produced
from Electronic Sources - Assessment of
Image Quality (IEC 1610: 1995) (H)
1999 Insulating Liquids - Determination of
the Dielectric Dissipation Factor by
Measurement of the Conductance and
Capacitance - Test Method IEC 61620: 1998;
(F)
1999 Corrugated Pressboard and Presspaper
for Electrical Purposes - Part 2: Methods of
Test IEC 61628-2: 1998; (F)
2001 Test Method for the Mechanical
Strength of Cores Made of Magnetic Oxides
IEC 61631:2001; (E)
2001 Low Voltage Surge Protective Deveices
- Part 21: Surge Protective Devices
Connected to Telecommunications and
Signalling Networks - Performance
Requirements and Testing Methods (S)
BS EN 61643-311
BS EN 61643-341
BS EN 61646
BS EN 61663-1
BS EN 61669
BS EN 61683
BS EN 61685
BS EN 61689
BS EN 61691-1
BS EN 61691-3-2
BS EN 61691-3-3
BS EN 61909
BS EN 61984
BS EN 61721
BS EN 61744
BS EN 61746
2001 Components for Low-Voltage Surge
Protective Devices - Part 311: Specification
for Gas Discharge Tubes (GDT) (S)
2001 Components for Low-Voltage Surge
Protective Devices - Part 341: Specification
for Thyristor Surge Suppressors (TSS) (S)
1997 Thin-Film Terrestrial Photovoltaic (PV)
Modules - Design Qualification and Type
Approval IEC 61646: 1996; (S)
2000 Lightning Protection Telecommunication Lines - Part 1: Fibre
Optic Installations IEC 61663-1: 1999; (S)
2001 Electroacoustics - Equipment for the
Measurement of Real-Ear Acoustical
Characteristics of Hearing Aids (N)
2000 Photovoltaic Systems - Power
Conditioners - Procedures for Measuring
Efficiency IEC 61683:1999; (S)
2002 Ultrasonics - Flow Measurement
Systems - Flow Test Object IEC 61685:2001;
(H)
1997 Ultrasonics - Physiotherapy Systems Performance Requirements and Methods of
Measurement in the Frequency Range 0.5
MHz to 5 MHz IEC 1689:1996 (S)
1997 Design Automation Part 1: VHDL
Language Reference Manual IEC 61691-1:
1997; (S)
2002 Behavioural Languages - Part 3-2:
Mathematical Operation in VHDL IEC
61691-3-2: 2001; (S)
2002 Behavioural Languages - Part 3-3:
Synthesis in VHDL IEC 61691-3-3: 2001;
(S)
2000 Audio Recording - Minidisc System
IEC 61909: 2000; (S)
2001 Connectors - Safety Requirements and
Tests IEC 61984:2001; (S)
2000 Susceptibility of a Photovoltaic (PV)
Module to Accidental Impact Damage
(Resistance to Impact Test) IEC 61721:
1995; (S)
2001 Calibration of Fibre Optic Chromatic
Dispersion Test Sets IEC 61744:2001; (S)
2001 Calibration of Optical Time-Domain
Reflectometers (OTDRs) IEC 61746:2001;
BS EN 61709
BS EN 61726
BS EN 61747-1
BS EN 61747-2
BS EN 61747-2-1
BS EN 61747-3
BS EN 61747-3-1
BS EN 61753-1-1
BS EN 61753-2-1
(S)
2000 Amd 1 Electronic Components Reliability - Reference Conditions for Failure
Rates and Stress Models for Conversion
AMD 10390; July 2000; Renumbers BS
5760-18:1997;(G)
2000 Cable Assemblies, Cables, Connectors
and Passive Microwave Components Screening Attenuation Measurement by the
Reverberation Chamber Method IEC 61726:
1999; (S)
2000 Amd 1 Liquid Crystal and Solid-State
Display Devices - Part 1: Generic
Specification AMD 10788, June 2000;
Renumbers BS IEC 61747-1:1998; IEC
61747-1: 1998; (S)
1999 Liquid Crystal and Solid-State Display
Devices - Part 2: Liquid Crystal Display
Modules - Sectional Specification IEC
61747-2: 1998; (S)
2001 Liquid Crystal and Solid-State Display
Devices - Part 2.1: Passive Matrix
Monochrome LCD Modules - Blank Detail
Specification QC 720301:1998; Renumbers
BS IEC 61747-2-1:1998; (S)
2000 Liquid Crystal and Solid State Display
Devices - Part 3: Sectional Specification for
Liquid Crystal Display (LCD) Cells
Renumbers BS IEC 61747-3:1998; IEC
61747-3:1998; (S)
2000 Liquid Crystal and Solid-State Display
Devices - Part 3-1: Liquid Crystal Display
(LCD) Cells - Blank Detail Specification
Renumbers BS IEC 61747-3-1: 1998; IEC
61747-3-1: 1998; (S)
2001 Fibre Optic Interconnecting Devices
and Passive Components Performance
Standard - Part 1-1: General and Guidance Interconnecting Devices (Connectors) IEC
61753-1-1:2000; (S)
2001 Fibre Optic Interconnecting Devices
and Passive Components Performance
Standard - Part 2-1: Fibre Optic Connectors
Terminated on Single-Mode Fibre For
Category U - Uncontrolled Environment IEC
61753-2-1:2000; (S)
BS EN 61753-2-3
BS EN 61754-1
BS EN 61754-2
BS EN 61754-4
BS EN 61754-4
BS EN 61754-4
BS EN 61754-5
BS EN 61754-6
BS EN 61754-6
BS EN 61754-8
BS EN 61754-9
BS EN 61754-10
BS EN 61754-12
BS EN 61754-13
2001 Fibre Optic Interconnecting Devices
and Passive Components Performance
Standard - Part 2-3: Non-Connectorised
Single Mode 1xN and 2xN Non-WavelengthSelective Branching Devices for Category U
- Uncontrolled Environment IEC 61753-23:2001; (S)
1997 Fibre Optic Connector Interfaces Part 1:
General and Guidance IEC 1754-1: 1996; (S)
1997 Fibre Optic Connector Interfaces Part 2:
Type BFOC/2,5 Connector Family IEC
1754-2: 1996 (S)
1997 Amd 2 Fibre Optic Connector
Interfaces Part 4: Type SC Connector Family
AMD 13391: March 20, 2002; IEC 61754-4:
1997; (S)
1997 Fibre Optic Connector Interfaces Part 4:
Type SC Connector Family IEC 61754-4:
1997; (S)
1997 Amd 1 Fibre Optic Connector
Interfaces Part 4: Type SC Connector Family
AMD 10772: March 2000; IEC 61754-4:
1997; (S)
2002 Fibre Optic Connector Interfaces - Part
5: Type MT Connector Family IEC 61754-5:
1996, Modified; (S)
1997 Amd 1 Fibre Optic Connector
Interfaces - Part 6: Type MU Connector
Family AMD 13435: March 8, 2002; IEC
61754-6: 1997; (S)
1997 Fibre Optic Connector Interfaces Part 6:
Type MU Connector Family IEC 61754-6:
1997; (S)
1997 Fibre Optic Connector Interfaces Part 8:
Type CF08 Connector Family IEC 61754-8:
1996; (S)
2001 Fibre Optic Connector Interfaces - Part
9: Type DS Connector Family (S)
2001 Fibre Optic Connector Interfaces - Part
10: Type Mini-MPO Connector Family IEC
61754-10:2000; (S)
2000 Fibre Optic Connector Interfaces - Part
12: Type FS Connector Family IEC 6175412: 1999; (S)
1999 Fibre Optic Connector Interfaces - Part
13: Type FC-PC Connector Family IEC
BS EN 61754-15
BS EN 61754-16
BS EN 61754-19
BS EN 61757-1
BS EN 61779-1
BS EN 61779-2
BS EN 61779-3
BS EN 61779-4
BS EN 61779-5
BS EN 61803
BS EN 61809
61754-13:1999; (S)
2001 Fibre Optic Connector Interfaces - Part
15: Type LSH Connector Family IEC 6175415:1999; (S)
2000 Fibre Optic Connector Interfaces - Part
16: Type PN Connector Family IEC 6175416: 1999; (S)
2002 Fiber Optic Connector Interfaces - Part
19: Type SG Connector Family Supersedes
DD IEC PAS 61754-19: 2001; IEC 6175419: 2001; (S)
1999 Fibre Optic Sensors - Part 1: Generic
Specification IEC 61757-1: 1998; (S)
2000 Electrical Apparatus for the Detection
and Measurement of Flammable Gases - Part
1: General Requirements and Test Methods
Supersedes BS EN 50054:1999;(Q)
2000 Electrical Apparatus for the Detection
and Measurement of Flammable Gases - Part
2: Performance Requirements for Group I
Apparatus Indicating a Volume Fraction up
to 5% Methane in Air Supersedes BS EN
50055:1999;(Q)
2000 Electrical Apparatus for the Detection
and Measurement of Flammable Gases - Part
3: Performance Requirements for Group I
Apparatus Indicating a Volume Fraction Up
to 100% Methane in Air Supersedes BS EN
50056:1999; (Q)
2000 Electrical Apparatus for the Detection
and Measurement of Flammable Gases - Part
4: Performance Requirements for Group II
Apparatus Indicating a Volume Fraction Up
to 100% Lower Explosive Limit Supersedes
BS EN 50057:1999; (Q)
2000 Electrical Apparatus for the Detection
and Measurement of Flammable Gases - Part
5: Performance Requirements for Group II
Apparatus Indicating a Volume Fraction Up
to 100% Gas Supersedes BS EN 50058:1999;
(Q)
1999 Determination of Power Losses in
High-Voltage Direct Current (HVDC)
Converter Stations IEC 61803: 1999; (E)
2001 Secondary Cells and Batteries
Containing Alkaline or Other Non-Acid
BS EN 61810-5
BS EN 61811-1
BS EN 61828
BS EN 61834-2
BS EN 61851-1
BS EN 61857-1
BS EN 61858
BS EN 61834-3
BS EN 61834-6
BS EN 61834-7
Electrolytes - Safety Requirements for
Portable Sealed Alkaline Secondary Cells
and Batteries IEC 61809:2000; (E)
1999 Electromechanical Non-Specified Time
All-Or-Nothing Relays - Part 5: Insulation
Coordination Supersedes BS 5992-3: 1980;
IEC 61810-5: 1998; (S)
1999 Electromechanical Non-Specified Time
All-Or-Nothing Relays of Assessed Quality Part 1: Generic Specification Supersedes BS
EN 116000-1: 1996; (T)
2002 Ultrasonics - Focusing Transducers Definitions and Measurement Methods for
the Transmitted Fields IEC 61828: 2001; (G)
1999 Recording - Helical-Scan Digital Video
Cassette Recording System Using 6,35 mm
Magnetic Tape for Consumer Use (525-60,
625-50, 1125-60 and 1250-50 Systems) - Part
2: SD Format for 525-60 and 625-50 Systems
IEC 61834-2: 1998; (S)
2001 Electric Vehicle Conductive Charging
System - Part 1: General Requirements IEC
61851-1:2001; (E)
1999 Electrical Insulation Systems Procedures for Thermal Evaluation - Part 1:
General Requirements - Low-Voltage IEC
61857-1: 1998; (F)
2000 Electrical Insulation Systems - Thermal
Evaulation of Modifications to an Established
Wire-Wound EIS IEC 61858: 1999; (F)
2000 Helical-Scan Digital Video Cassette
Recording System Using 6,35 mm Magnetic
Tape for Consumer Use (525-60, 625-50,
1125-60 and 1250-50 Systems) - Part 3: HD
Format for 1125-60 and 1250-50 Systems
IEC 61834-3: 1999; (S)
2001 Recording - Helical-Scan Digital Video
Cassette Recording System Using 6,35 mm
Magnetic Tape for Consumer Use (525-60,
625-50, 1125-60 and 1250-50 Systems) - Part
6: SDL Format IEC 61834-6: 2000; (S)
2001 Recording - Helical-Scan Digital Video
Cassette Recording System Using 6,35 mm
Magnetic Tape for Consumer Use (525-60,
625-50, 1125-60 and 1250-50 Systems) Part
7: EDTV2 Format IEC 61834-7:2001; (S)
BS EN 61834-8
BS EN 61834-10
BS EN 61837-1
BS EN 61837-2
BS EN 61837-3
BS EN 61857-21
BS EN 61860
BS EN 61868
BS EN 61904
BS EN 61904
2001 Recording - Helical-Scan Digital Video
Cassette Recording System Using 6,35 mm
Magnetic Tape for Consumer Use (525-60,
625-50, 1125-60 and 1250-50 Systems) Part
8: PALplus Format for the 625-50 System
IEC 61834-8:2001; (S)
2001 Recording - Helical-Scan Digital Video
Cassette Recording System Using 6,35 mm
Magnetic Tape for Consumer Use (525-60,
625-50, 1125-60 and 1250-50 Systems) Part
10: DTV Format IEC 61834-10:2001; (S)
1999 Surface Mounted Piezoelectric Devices
for Frequency Control and Selection Standard Outlines and Terminal Lead
Connections - Part 1: Plastic Moulded
Enclosure Outlines IEC 61837-1: 1999; (S)
2001 Surface Mounted Piezoelectric Devices
for Frequency Control and Selection Standard Outlines and Terminal Lead
Connections - Part 2: Ceramic Enclosures (S)
2001 Surface Mounted Piezoelectric Devices
for Frequency Control and Selection Standard Outlines and Terminal Lead
Connections - Part 3: Metal Enclosures IEC
61837-3:2000; (S)
1999 Electrical Insulation Systems Procedures for Thermal Evaluation - Part 21:
Specific Requirements for General-Purpose
Model - Wire-Wound Applications IEC
61857-21: 1998; (F)
2001 Dimensions of Low-Profile Cores Made
of Magnetic Oxides IEC 61861:2000; (E)
1999 Mineral Insulating Oils - Determination
of Kinematic Viscosity at Very Low
Temperatures IEC 61868: 1998; (F)
2001 Video Recording - Helican-Scan Digital
Component Video Cassette Recording
Format Using 12,65mm Magnetic Tape and
Incorporating Data Compression (Format
Digital-L) IEC 61904: 2000; (S)
2001 Corr 1 Video Recording - Helican-Scan
Digital Component Video Cassette
Recording Format Using 12,65mm Magnetic
Tape and Incorporating Data Compression
(Format Digital-L) CORR 13255:June 2001;
IEC 61904:2000; (S)
BS EN 61926-1
BS EN 61935-1
BS EN 61937
BS EN 61938
BS EN 61943
BS EN 61935-1
BS EN 61951-1
BS EN 61951-2
BS EN 61954
BS EN 61960-1
BS EN 61964
BS EN 61966-2-1
2001 Design Automation - Part 1: Standard
Test Language for All Systems - Common
Abbreviated Test Language for All Systems
(C/ATLAS) IEC 61926-1:1999; (S)
2001 Corr 1 Generic Cabling Systems Specification for the Testing of Blanced
Communication Cabling in Accordance with
ISO/IEC 11801 - Part 1: Installed Cabling
CORR 13178:September 2001; IEC 619351:2000; (S)
2001 Digital Audio - Interface for NonLinear PCM Encoded Audio Bitstreams
Applying IEC 60958 IEC 61937: 2000; (S)
1997 Audio, Video and Audiovisual Systems
- Interconnections and Matching Values Preferred Matching Values of Analogue
Signals IEC 1938: 1996 (S)
1999 Integrated Circuits - Manufacturing
Line Approval Application Guideline IEC
61943:1999; IECQ QC 211001:1999; (S)
2001 Corr 2 Generic Cabling Systems Specification for the Testing of Blanced
Communication Cabling in Accordance with
EN 50173 - Part 1: Installed Cabling CORR
13469:October 16,2001; ; IEC 61935-1:2000;
(S)
2001 Secondary Cells and Batteries
Containing Alkaline or Other Non-Acid
Electrolytes - Portable Sealed Rechargeable
Single Cells - Part 1: Nickel-Cadmium IEC
61951-1:2001; (E)
2001 Secondary Cells and Batteries Containg
Alkaline or Other Non-Acid Electrolytes Portable Sealed Rechargeable Single Cells Part 2: Nickel-Metal Hydride IEC 619512:2001; (E)
2000 Power Electronics for Electrical
Transmission and Distribution Systems Testing of Thyristor Valves for Static VAR
Compensators IEC 61954 ED. 1.0: 1999; (S)
2001 Secondary Lithium Cells and Batteries
for Portable Applications - Part 1: Secondary
Lithium Cells IEC 61960-1:2000; (E)
1999 Integrated Circuits - Memory Devices
Pin Configurations IEC 61964: 1999; (S)
2000 Multimedia Systems and Equipment -
BS EN 61966-3
BS EN 61966-4
BS EN 61966-5
BS EN 61966-8
BS EN 61966-9
BS EN 61969-1
BS EN 61969-2
BS EN 61969-2-1
BS EN 61969-2-2
BS EN 61978-1
BS EN 62005-1
Colour Measurement and Management - Part
2-1: Colour Management - Default RGB
Colour Space - sRGB IEC 61966-2-1: 1999;
(S)
2000 Multimedia Systems and Equipment Colour Measurement and Management - Part
3: Equipment Using Cathode Ray Tubes IEC
61966-3: 2000; (S)
2000 Multimedia Systems and Equipment Colour Measurement and Management - Part
4: Equipment Using Liquid Crystal Display
Panels IEC 61966-4: 2000; (S)
2001 Multimedia Systems and Equipment Colour Measurement and Management - Part
5: Equipment Using Plasma Display Panels
IEC 61966-5: 2000; (S)
2001 Multimedia Systems and Equipment Colour Measurement and Management - Part
8: Multimedia Colour Scanners IEC 61966-8:
2001; (S)
2001 Multimedia Systems and Equipment Colour Measurement and Management - Part
9: Digital Cameras IEC 61966-9: 2000; (S)
2000 Mechanical Structures for Electronic
Equipment - Outdoor Enclosures - Part 1:
Design Guidelines IEC 61969-1: 1999; (E)
2000 Mechanical Structures for Electronic
Equipment - Outdoor Enclosures - Part 2:
Sectional Specification - Coordination
Dimensions for Cases and Cabinets IEC
61969-2: 2000; (E)
2000 Mechanical Structures for Electronic
Equipment - Outdoor Enclosures - Part 2-1:
Detail Specification - Dimensions for
Cabinets IEC 61969-2-1: 2000; (E)
2000 Mechanical Structures for Electronic
Equipment - Outdoor Enclosures - Part 2-2:
Detail Specification - Dimensions for Cases
IEC 61969-2-2:2000; (E)
2001 Fibre Optic Passive Dispersion
Compensators - Part 1: Generic Specification
IEC 61978-1: 2000; (S)
2001 Reliability of Fibre Optic
Interconnecting Devices and Passive
Components - Part 1: Introductory Guide and
Definitions IEC 62005-1:2001; (S)
BS EN 62005-4
BS EN 62019
BS EN 62023
BS EN 61993-1
BS EN 61996
BS EN 62005-2
BS EN 62005-3
BS EN 62007-1
BS EN 62007-2
2000 Reliability of Fibre Optic
Interconnecting Devices and Passive Optical
Components - Part 4: Product Screening IEC
62005-4: 1999; (S)
1999 Electrical Accessories - CircuitBreakers and Similar Equipment for
Household Use - Auxiliary Contact Units
IEC 62019: 1999; (E)
2001 Structuring of Technical Information
and Documentation IEC 62023:2000; (G)
2001 Maritime Navigation and
Radiocommunication Equipment and
Systems - Part 1: Shipbourne Automatic
Transponder System Installation Using VHF
Digital Selective Calling (DSC) Techniques Operational and Performance Requirements,
Methods of Testing and Re
2001 Maritime Navigation and
Radiocommunication Equipment and
Systems - Shipborne Voyage Data Recorder
(VDR) - Performance Requirements Methods of Testing and Required Test
Results IEC 61996:2000; (Q)
2001 Reliability of Fibre Optic
Interconnecting Devices and Passive
Components - Part 2: Quantitative
Assessment of Relibility Based on
Accelerated Ageing Tests - Temperature and
Humidity; Steady State IEC 62005-2:2001;
(S)
2001 Reliability of Fibre Optic
Interconnecting Devices and Passive
Components - Part 3: Relevant Tests for
Evaluating Failure Modes and Failure
Mechanisms for Passive Components (S)
2000 Semiconductor Optoelectronic Devices
for Fibre Optic System Applications - Part 1:
Essential Ratings and Characteristics IEC
62007-1: 1997; Partially Replaces BS 64931-5: 1992 and Should Be Read Jointly with
BS EN 62007-2; (S)
2000 Semiconductor Optoelectronic Devices
for Fibre Optic System Applications - Part 2:
Measuring Methods IEC 62007-1: 1997;
Partially Replaces BS 6493-1-5: 1992 and
Should Be Read Jointly with BS EN 62007-
BS EN 62013-2
BS EN 62037
BS EN 62040-3
BS EN 62044-3
BS EN 62070
BS EN 62071
BS EN 62079
BS EN 62083
BS EN 62083
BS EN 62099
BS EN 62271-100
BS EN 62326-1
BS EN 62326-4
1; (S)
2001 Caplights for Use in Mines Susceptible
to Firedamp - Part 2: Performance and Other
Safety-Related Matters Supersedes BS 4945:
1989; IEC 62013-2: 2000; (Q)
2000 RF Connectors, Connector Cable
Assemblies and Cables - Intermodulation
Level Measurement IEC 62037:1999; (S)
2001 Uninterruptible Power Systems (UPS) Part 3: Method of Specifying the
Performance and Test Requirements
Supersedes DD ENV 50091-3:1999; (S)
2001 Cores Made of Soft Magnetic Materials
- Measuring Methods - Part 3: Magnetic
Properties at High Excitation Level (E)
2001 Broadcast Digital Video Tape
Recorders - Identification Method for
Recording and/or Reproduction Error Status
(S)
2001 Helical-Scan Compressed Digital Video
Cassette Recording System Using 6,35mm
Magnetic Tape - Forum D-7 IEC
62071:2000; (S)
2001 Preparation of Instructions Structuring, Content and Presentation IEC
62079:2001; (G)
2001 Medical Electrical Equipment Requirements for the Safety of Radiotherapy
Treatment of Planning Systems IEC
62083:2000; (N)
2001 Corr 1 Medical Electrical Equipment Requirements for the Safety of Radiotherapy
Treatment Planning Systems CORR
13355:September 2001; IEC 62083:2000;
(N)
2001 Fibre Optic Wavelength Switches Generic Specification IEC 62099:2001; (S)
2001 High-Voltage Switchgear and
Controlgear - Part 100: High-Voltage
Alternating-Current Circuit-Breakers IEC
62271-100: 2001; (E)
1997 Printed Boards Part 1: Generic
Specification IEC 2326-1: 1996; QC 230000:
1996; (S)
1997 Printed Boards Part 4: Rigid Multilayer
Printed Boards with Interlayer Connections -
BS EN 61140
BS EN 62326-4-1
BS EN 61143-2
BS EN 61146-1
BS EN 61157
BS EN 61158-2
BS EN 61158-2
BS EN 61158-2
BS EN 61169-1-1
BS EN 61169-2
BS EN 61169-24
Sectional Specification IEC 2326-4: 1996;
QC 230500: 1996; (S)
2001 Protection Against Electric Shock Common Aspects for Installation and
Equipment Supersedes PD 6535:1993; IEC
61140:1997; (E)
1997 Printed Boards Part 4: Rigid Multilayer
Printed Boards with Interlayer Connections Sectional Specification Section 1: Capability
Detail Specification - Performance Levels A,
B and C IEC 2326-4-1: 1996; QC 230401:
1996; (S)
1994 Amd 1 Electrical Measuring
Instruments - X-t Recorders Part 2:
Recommended Additional Test Methods
AMD 8389; January 15, 1995; Formerly BS
7610: Part 2: 1993; IEC 61143-2: 1992; (E)
1997 Video Cameras (PAL/SECAM/NTSC)
- Methods of Measurement Part 1: NonBroadcast Single-Sensor Cameras IEC 11461: 1994; (S)
1995 Requirements for the Declaration of the
Acoustic Output of Medical Diagnostic
Ultrasonic Equipment (IEC 1157: 1992) (N)
1994 Fieldbus Standard for Use in Industrial
Control Systems Part 2: Physical Layer
Specification and Service Definition (S)
1994 Amd 1 Fieldbus Standard for Use in
Industrial Control Systems Part 2: Physical
Layer Specification and Service Definition
(AMD 9265) November 15, 1996 (S)
1994 Amd 2 Fieldbus Standard for Use in
Industrial Control Systems Part 2: Physical
Layer Specification and Service Definition
AMD 9603; September 1997; (S)
1997 Radio-Frequency Connectors Part 1-1:
Single, Multi-Series, Dual-Language Blank
Detail Specification IEC 1169-1-1: 1996; (S)
2002 Radio Frequency Connectors - Part 2:
Sectional Specification - Radio Frequency
Coaxial Connectors of Type 9,52 IEC 611692:2001; (S)
2002 Radio-Frequency Connectors - Part 24:
Sectional Specification - Radio Frequency
Coaxial Connectors with Screw Coupling,
Typically for Use in 75 OHM Cable
BS EN 61169-31
BS EN 61169-32
BS EN 61169-33
BS EN 61169-36
BS EN 61179
BS EN 61180-1
BS EN 61180-2
BS EN 61187
BS EN 61202-1
BS EN 62077
BS EN 61182-7
BS EN 61194
Distribution Systems (Type F) IEC 6116924:2001; (S)
2000 Radio-Frequency Connectors Part 31:
RF Coaxial Connectors with Inner Diameter
of Outer Conductor 1,0 mm (0,039in) with
Screw Coupling - Characteristic Impedance
50 ohms (Type 1,0) IEC 1169-31: 1999; (S)
2000 Radio-Frequency Connectors - Part 32:
RF Coaxial Connectors with Inner Diameter
of Outer Conductor 1,85 mm (0,072 in) with
Screw Coupling - Characteristic Impedance
50 ohms (Type 1,85) IEC 61169-32:1999; (S)
1997 Radio-Frequency Connectors Part 33:
Sectional Specification for Series BMA r.f.
Connectors IEC 1169-33: 1996; (S)
1997 Radio-Frequency Connectors Part 36:
Microminiature r.f. Coaxial Connectors with
Snap-on Coupling - Characteristic Impedance
50 Omega (Type MCX) IEC 1169-36: 1996;
(S)
1993 Helical-Scan Digital Composite Video
Cassette Recording System Using 19 mm
Magnetic Tape, Format D2 (NTSC, PAL,
PAL-M) (IEC 1179: 1993) (S)
1995 Amd 1 Guide to High-Voltage Test
Techniques for Low-Voltage Equipment Part
1: Definitions, Test and Procedure
Requirements (IEC 1180-1: 1992) (AMD
8679) August 15, 1995 (Formerly BS 7640:
Part 1: 1993) (E)
1995 High-Voltage Test Techniques for
Low-Voltage Equipment Part 2: Test
Equipment (IEC 1180-2: 1994) (S)
1996 Electrical and Electronic Measuring
Equipment - Documentation (Replaces BS
4308: 1979) (G)
2000 Fibre Optic Isolators - Part 1: Generic
Specification IEC 61202-1:2000; (S)
2001 Fibre Optic Circulators - Generic
Specification IEC 62077:2001; (S)
FAULTY STANDARD 1996 Printed Boards
- Electronic Data Description and Transfer
Part 7: Bare Board Electric Test Information
in Digital Form (IEC 1182-7: 1995) (S)
1996 Characteristic Parameters of StandAlone Photovoltaic (PV) Systems (H)
BS EN 61196-2
BS EN 61196-3
BS EN 61204-3
BS EN 61204-6
BS EN 61316
BS EN 61215
BS EN 61217
BS EN 61217
BS EN 61221
BS EN 61223-3-1
BS EN 61223-3-2
1997 Radio-Frequency Cables Specifications Part 2: Semi-Rigid RadioFrequency and Coaxial Cables with
Polytetrafluoroethylene (PTFE) Insulation Sectional Specification IEC 1196-2: 1993;
(S)
1999 Radio Frequency Cables - Part 3:
Sectional Specification for Coaxial Cables
for Local Area Networks IEC 61196-3: 1998;
(S)
2001 Low Voltage Power Supplies, D.C.
Output - Part 3: Electromagnetic
Compatibility (EMC) IEC 61204-3:2000; (S)
2001 Low-Voltage Power Supplies, DC
Output - Part 6: Requirements for LowVoltage Power Supplies of Assessed
Performance IEC 61204-6:2000; (S)
2000 Industrial Cable Reels IEC 61316:
1999; (E)
1995 Crystalline Silicon Terrestrial
Photovoltaic (PV) Modules Design
Qualification and Type Approval (IEC 1215:
1993) (S)
1997 Amd 1 Radiotherapy Equipment Coordinates, Movements and Scales AMD
13331:February 15, 2002; IEC 61217: 1996;
(N)
1997 Guide to Co-Ordinates, Movements and
Scales Used for Radiotherapy Equipment
IEC 1217: 1996; (N)
1996 Petroleum Products and Lubricants Triaryl Phosphate Ester Turbine Control
Fluids (Category ISO-L-TCD) Specifications (IEC 1221: 1993) (W)
1999 Evaluation and Routine Testing in
Medical Imaging Departments - Part 3-1:
Acceptance Tests - Imaging Performance of
X-Ray Equipment for Radiographic and
Radioscopic Systems IEC 61223-3-1: 1999;
(N)
1997 Evaluation and Routine Testing in
Medical Imaging Departments Part 3:
Acceptance Tests Section 3.2: Imaging
Performance of Mammographic X-Ray
Equipment IEC 61223-3-2: 1996; Also
Known as BS 7725: Section 3.2: 1997; (N)
BS EN 61223-3-3
BS EN 61229
BS EN 61230
BS EN 61232
BS EN 61235
BS EN 61236
BS EN 61237-1
BS EN 61237-2
BS EN 61237-3
BS EN 61240
BS EN 61243-5
BS EN 61249-2-12
1997 Evaluation and Routine Testing in
Medical Imaging Departments Part 3:
Acceptance Tests Section 3.3: Imaging
Performance of X-Ray Equipment for Digital
Subtraction Angiography (DSA) IEC 612233-3: 1996; Also Known as BS 7725: Section
3.3: 1997; (N)
1996 Rigid Protective Covers for Live
Working on a.c. Installations (E)
1996 Amd 1 Live Working - Portable
Equipment for Earthing or Earthing and
Short-Circuiting (AMD 9060) June 15, 1996
(E)
1997 Amd 1 Aluminium-Clad Steel Wires
for Electrical Purposes AMD 13083; July
2001; (E)
1995 Amd 1 Live Working Insulating
Hollow Tubes for Electrical Purposes (AMD
8959) December 15, 1995 (Formerly BS
7741: 1994) (E)
1995 Amd 1 Saddles, Pole Clamps (Stick
Clamps) and Accessories for Live Working
(AMD 8958) December 15, 1995 (Formerly
BS 7743: 1994) (E)
1995 Broadcast Video Tape Recorders Methods of Measurement Part 1: Mechanical
Measurements (IEC 1237-1: 1994) (S)
1995 Methods of Measurement Broadcast
Video Tape Recorders Part 2: Electrical
Measurements of Analogue Composite Video
Signals (IEC 1237-2: 1995) (S)
1995 Broadcast Video Tape Recorders Methods of Measurement Part 3: Electrical
Measurements for Analogue Component
Video Signals (IEC 1237-3: 1995) (S)
1997 Piezoelectric Devices - Preparation of
Outline Drawings of Surface-Mounted
Devices (SMD) for Frequency Control and
Selection - General Rules IEC 1240: 1994;
(E)
2001 Live Working - Voltage Detectors Part 5: Voltage Detecting Systems (VDS) (E)
1999 Materials for Printed Boards and Other
Interconnecting Structures - Part 2-12:
Sectional Specification Set for Reinforced
Base Materials, Clad and Unclad - Epoxide
BS EN 61249-2-13
BS EN 61249-3-3
BS EN 61249-3-4
BS EN 61249-3-5
BS EN 61249-5-1
BS EN 61249-5-4
BS EN 61249-7-1
Non-Woven Aramid Laminate of Defined
Flammability, Copper-Clad IEC 61249-2-12:
1999; (
1999 Materials for Printed Boards and Other
Interconnecting Structures - Part 2-13:
Sectional Specification Set for Reinforced
Base Materials, Clad and Unclad - Cyanate
Ester Non-Woven Aramid Laminate of
Defined Flammability, Copper-Clad IEC
61249-2-13: 1
1999 Materials for Printed Boards and Other
Interconnecting Structures - Part 3-3:
Sectional Specification Set for Unreinforced
Base Materials, Clad and Unclad (Intended
for Flexible Printed Boards) - Adhesive
Coated Flexible Polyester Film IEC 61249-33:
1999 Materials for Printed Boards and Other
Interconnecting Structures - Part 3-4:
Sectional Specification Set for Unreinforced
Base Materials, Clad and Unclad (Intended
for Flexible Printed Boards) - Adhesive
Coated Flexible Polyimide Film IEC 612493-4:
1999 Materials for Printed Boards and Other
Interconnecting Structures - Part 3-5:
Sectional Specification Set for Unreinforced
Base Materials, Clad and Unclad (Intended
for Flexible Printed Boards) - Transfer
Adhesive Films for Flexible Printed Boards
IE
1996 Materials for Interconnection Structures
Part 5: Sectional Specification Set for
Conductive Foils and Films with and without
Coatings Section 1: Copper Foils (for the
Manufacture of Copper- Clad Base
Materials) (IEC 1249-5-1: 1995) (S)
1997 Materials for Interconnection Structures
Part 5: Sectional Specification Set for
Conductive Foils and Films with or without
Coatings Section 4: Conductive Inks IEC
1249-5-4:1996 (S)
1996 Materials for Interconnection Structures
Part 7: Sectional Specification Set for
Restraining Core Materials Section 1:
Copper/Invar/Copper (IEC 1249-7-1: 1995)
BS EN 61249-8-7
BS EN 61249-8-8
BS EN 61269-1
BS EN 61269-1-1
BS EN 61270
BS EN 61274-1
BS EN 61274-1-1
BS EN 61262-7
BS EN 61280-1-3
BS EN 61280-2-1
BS EN 61280-2-2
BS EN 61280-4-2
(S)
1997 Materials for Interconnection Structures
Part 8: Sectional Specification Set for NonConductive Films and Coatings Section 7:
Marking Legend Inks IEC 1249-8-7: 1996;
(S)
1997 Materials for Interconnection Structures
Part 8: Sectional Specification Set for NonConductive Films and Coatings Section 8:
Temporary Polymer Coatings IEC 61249-88: 1997; (S)
1997 Fibre Optic Terminus Sets Part 1:
Generic Specification IEC 1269-1: 1994; (S)
1997 Fibre Optic Terminus Sets Part 1-1:
Blank Detail Specification IEC 1269-1-1:
1994; (S)
1998 Capacitors for Microwave Ovens - Part
1: General IEC 61270-1: 1996; (S)
1997 Fibre Optic Adaptors Part 1: Generic
Specification IEC 1274-1: 1994; (S)
1997 Fibre Optic Adaptors Part 1-1: Blank
Detail Specification IEC 1274-1-1: 1994; (S)
1996 Characteristics of Electro-Optical XRay Imaging Intensifiers for Medical
Electrical Equipment Part 7: Determination
of the Modulation Transfer Function (IEC
1262-7: 1995) (N)
1999 Fibre Optic Communication Subsystem
Basic Test Procedures - Part 1-3: Test
Procedures for General Communication
Subsystems - Central Wavelength and
Spectral Width Measurement IEC 61280-1-3:
1998; (S)
1999 Fibre Optic Communication Subsystem
Basic Test Procedures - Part 2-1: Test
Procedures for Digital Systems - Receiver
Sensitivity and Overload Measurement IEC
61280-2-1: 1998; (S)
1999 Fibre Optic Communication Subsystem
Basic Test Procedures - Part 2-2: Test
Procedures for Digital Systems - Optical Eye
Pattern, Waveform, and Extinction Ratio IEC
61280-2-2: 1998; (S)
2000 Fibre Optic Communication Subsystem
Basic Test Procedures - Part 4-2: Fibre Optic
Cable Plant - Single-Mode Fibre Optic Cable
BS EN 61281-1
BS EN 61286
BS EN 61290-3
BS EN 61290-5-1
BS EN 61291-2
BS EN 61297
BS EN 61300-2-6
BS EN 61300-2-7
BS EN 61300-2-8
BS EN 61300-2-9
BS EN 61300-2-10
Plant Attenuation IEC 61280-4-2: 1999; (S)
1999 Fibre Optic Communication
Subsystems - Part 1: Generic Specification
IEC 61281-1: 1999; (S)
1996 Information Technology - Coded
Graphic Character Set for Use in the
Preparation of Documents Used in
Electrotechnology and for Information
Interchange (IEC 1286: 1995) (S)
2000 Optical Fibre Amplifiers - Basic
Specification - Part 3: Test Methods for
Noise Figure Parameters This Standard is
Identical with IEC 61290-3:2000; (S)
2000 Optical Fibre Amplifiers - Basic
Spefication - Part 5-1: Test Methods for
Reflectance Parameters - Optical Spectrum
Analyser This Standard is Identical with IEC
61290-5-1; (S)
2001 Optical Fibre Amplifiers - Part 2:
Digital Applications - Performance
Specification Template IEC 61291-2:2000;
(S)
1996 Industrial-Process Control Systems Classification of Adaptive Controllers for the
Purpose of Evaluation (IEC 1297: 1995) (Q)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2-6: Tests Tensile Strength of Coupling Mechanism
IEC 61300-2-6: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2-7: Tests Bending Moment IEC 61300-2-7: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2-8: Tests Bump IEC 61300-2-8: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2-9: Tests Shock IEC 61300-2-9: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2.10: Tests Crush Resistance IEC 61300-2-10: 1995; (S)
BS EN 50270
BS EN 45510-6-5
BS EN 45510-6-6
BS EN 61300-2-11
BS EN 61300-2-12
BS EN 61300-2-13
BS EN 61300-2-14
BS EN 61300-2-15
BS EN 61300-2-16
BS EN 61300-2-17
BS EN 61300-2-18
1999 Electromagnetic Compatibility Electrical Apparatus for the Detection and
Measurement of Combustible Gases, Toxic
Gases or Oxygen (S)
2000 Guide for Procurement of Power
Station Equipment - Part 6-5: Turbine
Auxiliaries - Dry Cooling Systems (Q)
2000 Guide for Procurement of Power
Station Equipment - Part 6-6: Turbine
Auxiliaries - Wet and Wet/Dry Cooling
Towers (Q)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2.11: Tests Axial Compression IEC 61300-2-11: 1995;
(S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2-12: Tests Impact IEC 61300-2-12: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2.13: Tests Acceleration IEC 61300-2-13: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2: Tests
Section 14: Maximum Input Power IEC
61300-2-14: 1997; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2-15: Tests Torque Strength of Coupling Mechanisms
IEC 61300-2-15: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2-16: Tests Mould Growth IEC 61300-2-16: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2-17: Tests Cold IEC 61300-2-17: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2.18: Tests Dry Heat - High Temperature Endurance IEC
BS EN 61300-2-19
BS EN 61300-2-20
BS EN 61300-2-21
BS EN 61300-2-22
BS EN 61300-2-23
BS EN 61300-2-24
BS EN 61300-2-25
BS EN 45510-6-7
BS EN 45510-6-9
BS EN 45510-7-1
61300-2-18: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2.19: Tests Damp Heat (Steady State) IEC 61300-2-19:
1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2.20: Tests Climatic Sequence IEC 61300-2-20: 1995;
(S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2.21: Tests Composite Temperature-Humidity Cyclic
Test IEC 61300-2-21: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2.22: Tests Change of Temperature IEC 61300-2-22:
1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2.23: Tests Sealing for Non-Pressurized Closures of
Fibre Optic Devices IEC 61300-2-23: 1995;
(S)
2000 Fibre Optic Interconnecting Devices
and Passive Components Basic Test and
Measurement Procedures - Part 2-24: Tests Screeen Testing of Ceramic Alignment Split
Sleeve by Stress Application IEC 61300-224: 1999; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2.25: Tests Sealing Endurance for Closures IEC 613002-25: 1995; (S)
1998 Guide for Procurement of Power
Station Equipment - Part 6-7: Turbine
Auxiliaries - Moisture Separator Reheaters
(Q)
2000 Guide for Procurement of Power
Station Equipment - Part 6-9: Turbine
Auxiliaries - Cooling Water Systems (Q)
2000 Guide for Procurement of Power
BS EN 61300-2-26
BS EN 61300-2-27
BS EN 61300-2-28
BS EN 61300-2-29
BS EN 61300-2-30
BS EN 61300-2-31
BS EN 61300-2-32
BS EN 61300-2-33
BS EN 61300-2-34
BS EN 61300-2-35
Station Equipment - Part 7-1: Pipework and
Valves - High Pressure Piping Systems (Q)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2.26: Tests Salt Mist IEC 61300-2-26: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2.27: Tests Dust - Laminar Flow IEC 61300-2-27: 1995;
(S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2.28: Tests Industrial Atmosphere (Sulphur Dioxide)
IEC 61300-2-28: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2.29: Tests Low Air Pressure IEC 61300-2-29: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2.30: Tests Solar Radiation IEC 61300-2-30: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2.31: Tests Nuclear Radiation IEC 61300-2-31: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2.32: Tests Water Vapour Permeation IEC 61300-2-32:
1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2.33: Tests Assembly and Disassembly of Closures IEC
61300-2-33: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2.34: Tests Resistance to Solvents and Contaminating
Fluids IEC 61300-2-34: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2.35: Tests -
BS EN 61300-2-36
BS EN 61300-2-37
BS EN 61300-2-38
BS EN 61300-2-39
BS EN 61300-2-40
BS EN 45510-7-2
BS EN 45510-8-1
BS EN 61307
BS EN 61300-2-43
BS EN 61300-2-45
Cable Nutation IEC 61300-2-35: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2.36: Tests Flammability (Fire Hazard) IEC 61300-2-36:
1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2.37: Tests Cable Bending for Closures IEC 61300-2-37:
1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2.38: Tests Sealing for Pressurized Closures of Fibre
Optic Devices IEC 61300-2-38: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 2: Tests
Section 39: Susceptibility to External
Magnetic Fields IEC 61300-2-39: 1997; (S)
2001 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures - Part 2-40: Tests Screen Testing of Attenuation of SingleMode Tuned Angles Optical Connectors IEC
61300-2-40: 2000; (S)
2000 Guide for Procurement of Power
Station Equipment - Part 7-2: Pipework and
Valves - Boiler and High Pressure Valves (Q)
1998 Guide for Procurement of Power
Station Equipment - Part 8-1: Control and
Instrumentation (Q)
1997 Industrial Microwave Heating
Installations - Test Methods for the
Determination of Power Output IEC 1307:
1994; Supersedes BS 7509: 1995; (F)
2000 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures - Part 2-43: Tests Screen Testing of Return Loss of Single
Mode PC Optical Fibre Connectors IEC
61300-2-43: 1999; (S)
1999 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures - Part 2-45: Tests -
BS EN 61300-3-1
BS EN 61300-3-2
BS EN 61300-3-3
BS EN 61300-3-5
BS EN 61300-3-7
BS EN 61300-3-8
BS EN 61300-3-9
BS EN 61300-3-17
Durability Test by Water Immersion IEC
61300-2-45: 1999; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 3.1:
Examinations and Measurements - Visual
Examination IEC 61300-3-1: 1995; (S)
1999 Fibre Optic Interconnecting Devices
and Passive Components - Basic Tests and
Measurement Procedures - Part 3.2:
Examinations and Measurements Polarization Dependence of Attenuation in a
Single-Mode Fibre Optic Device IEC 613003-2: 1999; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 3:
Examinations and Measurements Section 3:
Monitoring Change in Attenuation and in
Return Loss (Multi Paths) IEC 61300-3-3:
1997; (S)
2001 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures - Part 3-5:
Examinations and Measurements Wavelength Dependence of Attenuation IEC
61300-3-5: 2000; (S)
2001 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures - Part 3-7:
Examinations and Measurements Wavelength Dependance of Attenuation and
Return Loss IEC 61300-3-7:2000; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 3.8:
Examinations and Measurements - Ambient
Ligt Susceptibility IEC 61300-3-8: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 3:
Examinations and Measurements Section 9:
Far-End Crosstalk IEC 61300-3-9: 1997; (S)
2000 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures - Part 3-17:
BS EN 61300-3-18
BS EN 61300-3-19
BS EN 61300-3-20
BS EN 61308
BS EN 61313-1
BS EN 61300-3-22
BS EN 61300-3-24
BS EN 61300-3-25
Examinations and Measurements - Endface
Angle of Angle-Polished Ferrules IEC
61300-3-17: 1999; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 3.18:
Examinations and Measurements - Keying
Accuracy of an Angled Endface Connector
IEC 61300-3-18: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 3:
Examinations and Measurements Section 19:
Polarization Dependence of Return Loss of a
Single-Mode Fibre Optic Component IEC
61300-3-19: 1997; (
2002 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures - Part 3-20:
Examinations and Measurements Directivity of Fibre Optic Branching Devices
IEC 61300-3-20: 2001; (S)
1997 High-Frequency Dielectric Heating
Installations - Test Methods for the
Determination of Power Output IEC 1308:
1994; Supersedes BS 7510: 1995; (F)
1997 Fibre Optic Passive Components and
Cable Assemblies Part 1: Capability
Approval - Generic Specification IEC 613131: 1995; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 3:
Examinations and Measurements Section 22:
Ferrule Compression Force IEC 61300-3-22:
1997; (S)
2000 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures - Part 3-24:
Examinations and Measurements - Keying
Accuracy of Optical Connectors for
Polarization Maintaining Fibre IEC 61300-324: 1999; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 3:
BS EN 61076-1
BS EN 61076-2
BS EN 61076-3
BS EN 61076-3-001
BS EN 61076-4
BS EN 61076-4-001
BS EN 61076-4-102
BS EN 61076-4-103
Examinations and Measurements Section 25:
Concentricity of the Ferrules and Ferrules
with Fibre Installed IEC 61300-3-25: 1997;
(S)
1996 Amd 1 Connectors with Assessed
Quality, for Use in d.c., Low Frequency
Analogue and in Digital High Speed Data
Applications Part 1: Generic Specification
AMD 9507; July 2, 1997; IEC 61076-1:
1995; (T)
1999 Connectors for Use in d.c. LowFrequency Analogue and Digital High-Speed
Data Applications - Part 2: Circular
Connectors with Assessed Quality - Sectional
Specification IEC 61076-2: 1998; (T)
2000 Connectors for Use in d.c. LowFrequency Analogue and Digital High-Speed
Data Applications - Part 3: Rectangular
Connectors with Assessed Quality - Sectional
Specification IEC 61076-3: 1999; (T)
2000 Connectors for Use in d.c., LowFrequency Analogue and Digital High-Speed
Data Applications - Part 3-001: Rectangular
Connectors with Assessed Quality - Blank
Detail Specification IEC 61076-3-001: 1999;
(T)
1997 Connectors with Assessed Quality, for
Use in d.c., Low Frequency Analogue and in
Digital High Speed Data Applications Part 4:
Sectional Specification - Printed Board
Connectors IEC 61076-4: 1995; (T)
1997 Connectors with Assessed Quality, for
Use in d.c., Low-Frequency Analogue and in
Digital High-Speed Data Applications Part 4:
Printed Board Connectors Section 001: Blank
Detail Specification IEC 61076-4-001:1996
(T)
1997 Connectors with Assessed Quality, for
Use in d.c., Low-Frequency Analogue and in
Digital High Speed Data Applications Part 4:
Printed Board Connectors Section 102: Detail
Specification for Two-Part Single-Pole
Connectors, for Multiple Uses on Plug-In
1999 Connectors for Use in d.c. LowFrequency Analogue and Digital High Speed
Data Applications - Part 4-103: Printed
BS EN 50266-2-1
BS EN 50266-2-2
BS EN 50266-2-3
BS EN 50266-2-4
BS EN 50266-2-5
BS EN 50268-1
BS EN 50268-2
Board Connectors with Assesed Quality Detail Specification for Two-Part Connectors
with Shielding and a Basic Grid of 2,5 mm
IEC 610762001 Common Test Methods for Cables
under Fire Conditions - Test for Vertical
Flame Spread of Vertically-Mounted
Bunched Wires or Cables - Part 2-1:
Procedures - Category A F/R Together with
BS EN 50266-1, BS EN 50266-2-2 Thru BS
EN 502-2-5:2001 Supersede
2001 Common Test Methods for Cables
under Fire Conditions - Test for Vertical
Flame Spread of Vertically-Mounted
Bunched Wires or Cables - Part 2-2:
Procedures - Category A Together with BS
EN 50266-1, BS EN 50266-2-1, BS EN
50266-2-3 Thru BS EN 502-2-5:2
2001 Common Test Methods for Cables
under Fire Conditions - Test for Vertical
Flame Spread of Vertically-Mounted
Bunched Wires or Cables - Part 2-3:
Procedures - Category B Together with BS
EN 50266-1, BS EN 50266-2-1, BS EN
50266-2-2,BS EN 50266-2-4 and
2001 Common Test Methods for Cables
under Fire Conditions - Test for Vertical
Flame Spread of Vertically-Mounted
Bunched Wires or Cables - Part 2-4:
Procedures - Category C Together with BS
EN 50266-1, BS EN 50266-2-1 Thru BS EN
50266-2-3 and BS EN 502-22001 Common Test Methods for Cables
under Fire Conditions - Test for Vertical
Flame Spread of Vertically-Mounted
Bunched Wires or Cables - Part 2-5:
Procedures - Small Cables - Category D
Together with BS EN 50266-1, BS EN
50266-2-1 Thru BS EN 50266-2-4:2
2000 Common Test Methods for Cables
Under Fire Conditions - Measurement of
Smoke Density of Cables Burning Under
Defined Conditions - Part 1: Apparatus
Supersedes BS 7622-1: 1993; (E)
2000 Common Test Methods for Cables
Under Fire Conditions - Measurement of
BS EN 45544-1
BS EN 45544-2
BS EN 45544-3
BS EN 61300-3-26
BS EN 61300-3-27
BS EN 61300-3-33
BS EN 61303
BS EN 61305-1
Smoke Density of Cables Burning under
Defined Conditions - Part 2: Procedure
Supersedes BS 7622-2: 1993; (E)
2000 Workplace Atmospheres - Electrical
Apparatus Used for the Direct Detection and
Direct Concentration Measurement of Toxic
Gases and Vapours - Part 1: General
Requirements and Test Methods (N)
2000 Workplace Atmospheres - Electrical
Apparatus Used for the Direct Detection and
Direct Concentration Measurement of Toxic
Gases and Vapours - Part 2: Performance
Requirements for Apparatus Used for
Measuring Concentrations in the Region of
Limit Value
2000 Workplace Atmospheres - Electrical
Apparatus Used for the Direct Detection and
Direct Concentration Measurement of Toxic
Gases and Vapours - Part 3: Performance
Requirements for Apparatus Used for
Measuring Concentrations Well Above Limit
Values (N)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 3:
Examinations and Measurements Section 26:
Measurement of the Angular Misalignment
between Fibre and Ferrules Axes IEC 613003-26: 1997; (S)
1997 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures Part 3:
Examinations and Measurements Section 27:
Measurement Method for the Hole Location
of a Multiway Connector Plug IEC 61300-327: 1997; (S)
1999 Fibre Optic Interconnecting Devices
and Passive Components - Basic Test and
Measurement Procedures - Part 3.33:
Examinations and Measurements - Ferrule
Withdrawal Force IEC 61300-3-33: 1999; (S)
1997 Medical Electrical Equipment Radionuclide Calibrators - Particular
Methods for Describing Performance IEC
1303: 1994; (N)
1995 Household High-Fidelity Audio
BS EN 60958-3
BS EN 60958-4
BS EN 60961
BS EN 60966-4-1
BS EN 60968
BS EN 60969
BS EN 60969
BS EN 60969
BS EN 60974-11
BS EN 60974-12
BS EN 61071-1
BS EN 60990
BS EN 61000-2-10
BS EN 60976
Equipment and Systems - Methods of
Measuring and Specifying the Performance
Part 1: General (IEC 1305-1: 1995) (S)
2000 Digital Audio Interface - Part 3:
Consumer Applications IEC 60958-3: 1999;
(S)
Faulty Standard 2000 Digital Audio Interface
- Part 4: Professional Applications IEC
60958-4: 1999; (S)
1994 Helical-Scan Video Tape Cassette
System Using 12.65 mm (0.5 in) Magnetic
Tape on Type L (IEC 961: 1993) (Replaces
BS 7260: 1989) (S)
1996 Radio Frequency and Coaxial Cable
Assemblies Part 4-1: Blank Detail
Specification for Semi-Rigid Coaxial Cable
Assemblies (IEC 966-4-1: 1992) (S)
2000 Self-Ballasted Lamps for General
Lighting Services - Safety Requirements
Renumbers BS 7173: 1989; (E)
1993 Amd 1 Self-Ballasted Lamps for
General Lighting Services, Performance
Requirements AMD 7968; November 15,
1993; Formerly BS 7199: 1989 1989; (E)
1993 Amd 2 Self-Ballasted Lamps for
General Lighting Services Performance
Requirements Formerly BS 7199: 1989;
AMD 7717; May 15, 1993; (E)
1993 Corr 2 Self-Ballasted Lamps for
General Lighting Services - Performance
Requirements CORR 13436: August 31,
2001; (E)
1996 Arc-Welding Equipment Part 11:
Electrode Holders (F)
1996 Arc-Welding Equipment Part 12:
Coupling Devices for Welding Cables (F)
1997 Power Electronic Capacitors Part 1:
General (S)
2000 Methods of Measurement of Touch
Current and Protective Conductor Current
IEC 60990:1999; (F)
1999 Electromagnetic Compatibility (EMC) Part 2-10: Environment - Description of
HEMP Environment - Conducted
Disturbance IEC 61000-2-10: 1998; (S)
2001 Amd 1 Medical Electrical Equipment -
BS EN 60999-1
BS EN 61000-2-9
BS EN 61000-3-2 ED.2
BS EN 61000-3-11
BS EN 61000-3-11
BS EN 61000-4-14
BS EN 61000-4-17
BS EN 61000-4-23
Medical Electron Accelerators - Functional
Performance Characteristics AMD
10622:September 28,2001; Renumbers BS
5724-3.1:1990; IEC 60976:1989; (N)
2000 Connecting Devices - Electrical Copper
Conductors - Saftey Requirements for ScrewType and Screwless-Type Clamping Units Part 1:General Requirements and Particular
Requirements for Clamping Units for
Conductors from 0,2 mm2 up to 35 mm2
(Included)
1996 Electromagnetic Compatibility (EMC)
Part 2: Environment Section 9: Description
of HEMP Environment - Radiated
Disturbance - Basic EMC Publication IEC
1000-2-9: 1996; (S)
2001 Electromagnetic Compatibility (EMC) Part 3-2: Limits - Limits for Harmonic
Current Emissions (Equipment Input Current
up to and Including 16 A Per Phase) IEC
61000-3-2 ED.2:2000; (S)
Faulty Standard 2001 Electromagnetic
Compatibility (EMC) - Part 3-11: Limits Limitation of Voltage Changes, Voltage
Fluctuations and Flicker in Public LowVoltage Supply Systems - Equipment with
Rated Voltage Current Greater than or Equal
to 75 A and Su
2001 Corr 1 Electromagnetic Compatibility
(EMC) - Part 3-11: Limits - Limitation of
Voltage Changes, Voltage Fluctuations and
Flicker in Public Low-Voltage Supply
Systems - Equipment with Rated Voltage
Current Greater than or Equal to 75 A and
Subject to
1999 Electromagnetic Compatibility (EMC) Part 4-14: Testing and Measurement
Techniques - Voltage Fluctuation Immunity
Test IEC 61000-4-14: 1999; (S)
1999 Electromagnetic Compatibility (EMC) Part 4-17: Testing and Measurement
Techniques - Ripple on d.c. Input Power Port
Immunity Test IEC 61000-4-17: 1999; (S)
2001 Electromagnetic Compatibility (EMC) Part 4-23: Testing and Measurement
Techniques - Test Methods for Protective
BS EN 61000-4-23
BS EN 61000-4-24
BS EN 61000-4-27
BS EN 61000-4-28
BS EN 61000-4-29
BS EN 61006
BS EN 61019-2
BS EN 61028
BS EN 61000-5-5
BS EN 61000-5-7
Devices for HEMP and Other Radiated
Distrubances IEC 61000-4-23: 2000; (S)
2001 Corr 1 Electromagnetic Compatibility
(EMC) - Part 4-23: Testing and Measurement
Techniques - Test Methods for Protective
Devices for HEMP and Other Radiated
Disturbances CORR 13256:June 2001; IEC
61000-4-23:2000; (S)
1997 Electromagnetic Compatibility (EMC) Part 4: Testing and Measurement Techniques
- Section 24: Test Methods for Protective
Devices for HEMP Conducted Distrubance
Basic EMC Publication IEC 61000-4-24:
1997; (S)
2001 Electromagnetic Compatibility (EMC) Part 4-27: Testing and Measurement
Techniques - Unbalance, Immunity Test IEC
61000-4-27:2000; (S)
2000 Electromagnetic Compatibility (EMC) Part 4-28: Testing and Measurement
Techniques - Variation of Power Frequency,
Immunity Test IEC 61000-4-28: 1999; (S)
2001 Electromagnetic Compatibility (EMC) Part 4-29: Testing and Measurement
Techniques - Voltage Dips, Short
Interruptions and Voltage Variations on D.C.
Input Power Port Immunity Tests IEC 610004-29:2000; (S)
1993 Methods of Test for Determination of
the Glass Transition Temperature of
Electrical Insulating Materials (IEC 1006:
1991) (F)
1997 Surface Acoustic Wave (SAW)
Resonators Part 2: Guide to the Use IEC
61019-2: 1995; (F)
1993 Electrical Measuring Instruments - X-Y
Recorders Renumbers BS 7437: 1991; (S)
1996 Electromagnetic Compatibility (EMC)
Part 5: Installation and Mitigation Guidelines
Section 5: Specification of Protective
Devices for HEMP Conducted Disturbance
Basic EMC Publication IEC 1000-5-5: 1996;
(S)
2001 Electromagnetic Compatibility - Part 57: Installation and Mitigation Guidelines Degrees of Protection by Enclosures Against
BS EN 61000-6-1
BS EN 61000-6-2
BS EN 61000-6-2
BS EN 61000-6-3
BS EN 61000-6-4
BS EN 61010-2-010
BS EN 61010-2-010
BS EN 61010-2-020
Electromagnetic Disturbances (EM Code) (S)
2001 Electromagnetic Compatibility (EMC) Part 6-1: Generic Standards - Immunity for
Residential, Commercial and Light-Industrial
Environments Supersedes BS EN 500821:1998, Which Will Remain Current; IEC
61000-6-1:1997; (S)
2001 Electromagnetic Compatibility (EMC) Part 6-2: Generic Standards - Immunity for
Industrial Environments Supersedes BS EN
61000-6-2:1999, Which Will Remain
Current; IEC 61000-6-2:1999 (S)
1999 Electromagnetic Compatibility (EMC) Part 6-2: Generic Standards - Immunity for
Industrial Environments Supersedes BS EN
50082-2:1995; Superseded by BS EN 610006-2:2001, But This Will Remain Current; (S)
2001 Electromagnetic Compatibility (EMC) Part 6-3: Generic Standards - Emission
Standard for Residential, Commercial and
light-Industrial Environments Supersedes BS
EN 50081-1:1992, But Will Remain Current;
IEC 61000-6-3:1996; (S)
2001 Electromagnetic Compatibility (EMC) Part 6-4: Generic Standards - Emission
Standard for Industrial Environments
Supersedes BS EN 50081-2:1994, But Will
Remain Current; IEC 61000-6-4:1997; (S)
1995 Amd 1 Safety Requirements for
Electrical Equipment for Measurement,
Control, and Laboratory Use Part 2-010:
Particular Requirements for Laboratory
Equipment for the Heating of Materials (IEC
1010-2-010: 1992) (AMD 8447) March 15,
1995 (Formerly BS 76
1995 Amd 1 Safety Requirements for
Electrical Equipment for Measurement,
Control, and Laboratory Use Part 2-010:
Particular Requirements for Laboratory
Equipment for the Heating of Materials IEC
1010-2-010: 1992; AMD 9300; February
1997; Read in Conjuncti
1995 Safety Requirements for Electrical
Equipment for Measurement, Control, and
Laboratory Use Part 2-020: Particular
Requirements for Laboratory Centrifuges
BS EN 61010-2-020
BS EN 61010-2-031
BS EN 61028
BS EN 61028
BS EN 61029-1
BS EN 61029-1
BS EN 61030
BS EN 61010-2-032
BS EN 61010-2-041
BS EN 61010-2-042
Includes Amendment No.1; AMD 8440;
February 15, 1995; IEC 1010-2-020: 1992;
Fomerly BS 7687: Part
1995 Amd 1 Safety Requirements for
Electrical Equipment for Measurement,
Control, and Laboratory Use Part 2-020:
Particular Requirements for Laboratory
Centrifuges IEC 1010-2-020: 1992; AMD
9301 March 1997; Supersedes BS 4402:
1982; (S)
1995 Safety Requirements for Electrical
Equipment for Measurement, Control, and
Laboratory Use Part 2-031: Particular
Requirements for Hand- Held Probe
Assemblies for Electrical Measurement and
Test IEC 1010-2-031: 1993; (E)
1993 Amd 1 Electrical Measuring
Instruments - X-Y Recorders AMD 8968;
December 15, 1995; (S)
1993 Amd 2 Electrical Measuring
Instruments - X-Y Recorders AMD 10281;
April 15, 1999; (S)
2000 Safety of Transportable MotorOperated Electric Tools - Part 1: General
Requirements (F)
1996 Safety of Transportable MotorOperated Tools Part 1: General Requirements
(F)
1993 Amd 1 Domestic Digital Bus (D2B) for
Audio, Video and Audiovisual Systems (IEC
1030: 1991) (AMD 7902) October 15, 1993
(Formerly BS 7536: 1991) (S)
1995 Safety Requirements for Electrical
Equipment for Measurement, Control, and
Laboratory Use Part 2-032: Particular
Requirements for Hand-Held Current Clamps
for Electrical Measurement and Test (IEC
1010-2-032: 1994) (S)
1995 Safety Requirements for Electrical
Equipment for Measurement, Control, and
Laboratory Use Part 2-041: Particular
Requirements for Autoclaves Using Steam
for the Treatment of Medical Materials, and
for Laboratory Processes Supersedes Parts of
BS 2646
1997 Safety Requirements for Electrical
BS EN 61010-2-045
BS EN 61010-2-051
BS EN 61010-2-061
BS EN 61011
BS EN 61011
BS EN 61011
BS EN 61016
BS EN 61036
BS EN 61038
Equipment for Measurement, Control, and
Laboratory Use Part 2-042: Particular
Requirements for Autoclaves and Sterilizers
Using Toxic Gas for the Treatment of
Medical Materials, and for Laboratory
Processes IEC 6101
2001 Safety Requirements for Electrical
Equipment for Measurement, Control, and
Laboratory Use - Part 2-045: Particular
Requirements for Washer Disinfectors Used
in Medical, Pharmaceutical, Veterinary and
Laboratory Fields (E)
1996 Safety Requirements for Electrical
Equipment for Measurement, Control, and
Laboratory Use Part 2-051: Particular
Requirements for Laboratory Equipment for
Mechanical Mixing and Stirring (IEC 10102-051: 1995) (S)
1996 Safety Requirements for Electrical
Equipment for Measurement, Control, and
Laboratory Use Part 2-061: Particular
Requirements for Laboratory Atomic
Spectrometers with Thermal Atomization and
Ionization (IEC 1010-2- 061: 1995) (S)
1993 Electric Fence Energizers Safety
Requirements for Mains- Operated Electric
Fence Energizers Supersedes BS 1632:1980;
Superseded by BS EN 60335-2-76; (E)
1993 Amd 1 Electric Fence Energizers Safety
Requirements for Mains-Operated Electric
Fence Energizers AMD 8569; July 15, 1995;
Superseded by BS EN 60335-2-76; (E)
1993 Amd 2 Electric Fence Energizers Safety
Requirements for Mains-Operated Electric
Fence Energizers AMD 9347 December 18,
1996; Superseded by BS EN 60335-2-76; (E)
2001 Helical-Scan Digital Component Video
Cassette Recording System Using 19 mm
Magnetic Tape (Format D-1) IEC
61016:1989 (Incorporating Amendment
1:1999); (S)
1997 Alternating Current Static Watt-Hour
Meters for Active Energy (Classes 1 and 2)
IEC 60136: 1996; (E)
1993 Electricity Metering - Tariff and Load
Controls - Particular Requirements for Time
BS EN 61038
BS EN 61038
BS EN 61040
BS EN 61041-2
BS EN 61048
BS EN 61073-1
BS EN 61083-1
BS EN 61041-1
BS EN 61041-3
BS EN 61048
BS EN 61048
BS EN 61061-3-2
Switches Renumbers BS 7415: 1991; (E)
1993 Time Switches for Tariff and Load
Control Renumbers BS 7415: 1991; (E)
1993 Amd 1 Time Switches for Tariff and
Load Control AMD 9357; January 1997; (E)
1993 Power and Energy Measuring
Detectors, Instruments and Equipment for
Laser Radiation (IEC 1040: 1990) (E)
1996 Methods of Measurement NonBroadcast Video Tape Recorders Part 2:
Video Characteristics Chrominance SECAM
(IEC 1041-2: 1994) (S)
1993 Capacitors for Use in Tubular
Fluorescent and Other Discharge Lamp
Circuits - General and Safety Requirements
(Supersedes BS 4017: 1979) (E)
2000 Mechanical Splices and Fusion Splice
Protectors for Optical Fibres and Cables Part 1: Generic Specification (S)
2001 Instruments and Software Used in
Measurement in High-Voltage Impulse Tests
- Part 1: Requirements for Instruments IEC
61083-1:2001; (S)
1995 Amd 2 Non-Broadcast Video Tape
Recorders - Methods of Measurement Part 1.
General Video (NTSC/PAL) and Audio
(Longitudinal) Characteristics (IEC 1041-1:
1990) (AMD 8872) November 15, 1995
(Also Numbered BS 7434: Part 1: 1991) (S)
1995 Amd 1 Non-Broadcast Video Tape
Recorders - Methods of Measurement Part 3:
Audio Characteristics for FM Recording
(IEC 1041-3: 1993) (AMD 8933) December
15, 1995 (Also Numbered BS 7434: Part 3:
1994) (S)
1993 Amd 1 Auxiliaries for Lamps Capacitors for Use in Tubular Fluorescent
and Other Discharge Lamp Circuits - General
and Safety Requirements AMD 9153;
September 15, 1996; (E)
1993 Amd 2 Auxiliaries for Lamps Capacitors for Use in Tubular Fluorescent
and Other Discharge Lamp Circuits - General
and Safety Requirements AMD 10488; July
1999; (E)
2002 Non-Impregnated Densified Laminated
BS EN 61069-3
BS EN 61069-7
BS EN 61069-8
BS EN 61071-2
BS EN 61075
BS EN 61076-1
BS EN 61076-1
BS EN 61076-4-104
Wood for Electrical Purposes - Part 3:
Specifications for Individual Materials Sheet 1: Sheets Produced from Beech Veneer
IEC 61061-3-2: 2001; (F)
1997 Industrial-Process Measurement and
Control - Evaluation of System Properties for
the Purpose of System Assessment Part 3:
Assessment of System Functionality IEC
1069-3: 1996; (Q)
1999 Industrial-Process Measurement and
Control - Evaluation of System Properties for
the Purpose of System Assessment Part 7:
Assessment of System Safety IEC 61069-7:
1999; (Q)
1999 Industrial-Process Measurement and
Control - Evaluation of System Properties for
the Purpose of System Assessment Part 8:
Assessment of Non-Task Related System
Properties IEC 61069-8: 1999; (Q)
1996 Power Electronic Capacitors Part 2:
Requirements for Disconnecting Test on
Fuses, Destruction Test, Self Healing Test
and Endurance Test (IEC 1071-2: 1994) (S)
1993 Amd 1 Loran-C Receivers for Ships Minimum Performance Standards - Methods
of Testing and Required Test Results (AMD
7886) August 15, 1993 (Formerly BS 7538:
1991) (Q)
1996 Connectors with Assessed Quality, for
Use in d.c., Low Frequency Analogue and in
Digital High Speed Data Applications Part 1:
Generic Specification IEC 61076-1: 1995;
(T)
1996 Amd 2 Connectors with Assessed
Quality, for Use in d.c., Low Frequency
Analogue and in Digital High Speed Data
Applications - Part 1: Generic Specification
AMD 13537: March 15, 2002; IEC 61076-1:
1995; QC 480000: 1995; (T)
1999 Connectors for Use in d.c. LowFrequency Analogue and Digital High-Speed
Data Applications - Part 4-104: Printed
Board Connectors with Assessed Quality Detail Specification for Two-Part Modular
Connectors, Basic Grid of 2,0 mm, with
Terminations on
BS EN 61076-4-107
BS EN 61094-5
BS EN 61096
BS EN 61096
BS EN 61076-4-110
BS EN 61076-5
BS EN 61076-7
BS EN 61078
BS EN 61083-1
2001 Connectors for Electronic Equipment Part 4-107: Printed Board Connectors with
Assessed Quality - Detail Specification for
Shielded Two-Part Connectors Having a
Basic Grid of 2,0 mm, Fixed Part with Solder
and Press-in Terminations for Printed Board
2002 Measurement Microphones - Part 5:
Methods for Pressure Calibration of Working
Standard Microphones by Comparison IEC
61094-5: 2001; (S)
1993 Methods of Measuring the
Characteristics of Reproducing Equipment
for Digital Audio Compact Discs (IEC 1096:
1992) (S)
1993 Amd 1 Methods of Measuring the
Characteristics of Reproducing Equipment
for Digital Audio Compact Discs IEC 1096:
1992; (S)
2002 Connectors for Electronic Equipment Part 4-110: Printed Board Connectors with
Assessed Quality - Detail Specification for
Latched Cable Connector System Having a
Basic Grid of 2,0 mm Including Full
Shielding and Latching Function IEC 610764-110:20
2001 Connectors for Use in d.c., LowFrequency Analogue and Digital High-Speed
Data Applications - Part 5: In-Line Sockets
with Assessed Quality - Sectional
Specification IEC 61076-5:2001; (T)
2001 Connectors for Use in d.c., LowFrequency Analogue and Digital High Speed
Data Applications - Part 7: Cable Outlet
Accessories with Assessed Quality, Including
Qualification and Capability Approval Sectional Specification IEC 61076-7: 2000;
(T)
1994 Amd 1 Reliability of Systems,
Equipment and Components Part 9: Guide to
the Block Diagram Technique (AMD 8152)
April 15, 1994 (IEC 1078: 1991) (Formerly
BS 5760: Part 9: 1992) (G)
1993 Amd 1 Digital Recorders for
Measurements in High-Voltage Impulse
Tests Part 1: Requirements for Digital
Recorders (AMD 7925) September 15, 1993
BS EN 61104
BS EN 61105
BS EN 61106
BS EN 61107
BS EN 61110
BS EN 61114-1
BS EN 61114-1
BS EN 61114-2
BS EN 61118
BS EN 61119-1
BS EN 61119-2
BS EN 61119-3
BS EN 61119-6
BS EN 61120-2
(Formerly BS 7528: Part 1: 1991) (S)
1993 Compact Disc Video System - 12 cm
CD-V (IEC 1104: 1992)
1994 Reference Tapes for Video Tape
Recorder Systems (IEC 1105: 1991) (S)
1993 Videodisks Methods of Measurement
for Parameters (IEC 1106: 1993) (S)
1996 Data Exchange for Meter Reading,
Tariff and Load Control - Direct Local Data
Exchange (IEC 1107: 1996) (S)
1992 System Omega and Differential Omega
Receivers for Ships - Operational and
Performance Requirements - Methods of
Testing and Required Test Results (IEC
1110: 1992)
1999 Receiving Antennas for Satellite
Broadcast Transmissions in the 11/12 GHz
Band - Part 1: Electrical Measurements IEC
61114-1: 1999; (S)
1995 Methods of Measurement on Receiving
Antennas for Satellite Broadcast
Transmissions in the 12 GHz Band Part 1:
Electrical Measurements on DBS Receiving
Antennas (IEC 1114-1: 1992) (S)
1997 Methods of Measurement on Receiving
Antennas for Satellite Broadcast
Transmission in the 11/12 GHz Band Part 2:
Mechanical and Environmental Tests on
Individual and Collective Receiving
Antennas IEC 1114-2: 1996; (S)
1994 Helical-Scan Video Tape Cassette
System Using 12.65 mm (0.5 in) Magnetic
Tape - Type M2 (IEC 1118: 1993) (S)
1994 Digital Audio Tape Cassette System
(DAT) Part 1: Dimensions and
Characteristics (IEC 1119-1: 1992) (S)
1994 Digital Audio Tape Cassette System
(DAT) Part 2: DAT Calibration Tape (IEC
1119-2: 1991) (S)
1994 Digital Audio Tape Cassette System
(DAT) Part 3: DAT Tape Properties (IEC
1119-3: 1992) (S)
1994 Digital Audio Tape Cassette System
(DAT) Part 6: Serial Copy Management
System (IEC 1119-6: 1992) (S)
1994 Digital Audio Tape Recorder Reel to
BS EN 61120-3
BS EN 61120-5
BS EN 61122
BS EN 61131-2
BS EN 61131-2
BS EN 61131-2
BS EN 61131-5
BS EN 61131-7
BS EN 60601-2-47
BS EN 60601-2-49
BS EN 60601-2-50
BS EN 60603-1
Reel System, Using 6.3 mm Magnetic Tape,
for Professional Use Part 2: Format A (IEC
1120-2: 1991) (S)
1994 Digital Audio Tape Recorder Reel to
Reel System, Using 6.3 mm Magnetic Tape,
for Professional Use Part 3: Format B (IEC
1120-3: 1991) (S)
1996 Digital Audio Tape Recorder Reel-toReel System, Using 6.3 mm Magnetic Tape,
for Professional Use Part 5: Reels (IEC 11205: 1995) (S)
1994 Still Video Floppy Disk Magnetic
Recording System (IEC 1122: 1992) (S)
1995 Programmable Controllers Part 2:
Equipment Requirements and Tests (IEC
1131-2: 1992) (S)
1995 Amd 1 Programmable Controllers Part
2: Equipment Requirements and Tests AMD
9441; April 15, 1997; IEC 1131-2: 1992; (S)
1995 Amd 2 Programmable Controllers Part
2: Equipment Requirements and Tests AMD
11095: March 2001; (S)
2001 Programmable Controllers - Part 5:
Communications IEC 61131-5: 2000; (S)
2001 Programmable Controllers - Part 7:
Fuzzy Control Programming IEC 611317:2000; (S)
2001 Medical Electrical Equipment - Part 247: Particular Requirements for the Safety,
Including Essential Performance, of
Ambulatory Electrocardiographic Systems
IEC 60601-2-47:2001; (N)
2001 Medical Electrical Equipment - Part 249: Particular Requirements for the Safety of
Multifunction Patient Monitoring Equipment
IEC 60601-2-49:2001; (N)
2002 Medical Electrical Equipment - Part 250: Particular Requirements for the Safety of
Infant Phototherapy Equipment IEC 606012-50: 2000; (N)
2000 Connectors for Frequencies Below 3
MHz for Use with Printed Boards - Part 1:
Generic Specification - General
Requirements and Guide for the Preparation
of Detail Specifications, with Assessed
Quality Renumbers BS QC 010000: 1993;
BS EN 60603-2
BS EN 60603-10
BS EN 60603-14
BS EN 60619
BS EN 60662
BS EN 60662
BS EN 60672-2
BS EN 60672-3
BS EN 60679-3
BS EN 60684-1
BS EN 60695-6-1
IEC 60603-2: 1991; (
1998 Connectors for Frequencies Below 3
MHz for Use with Printed Boards - Part 2:
Detail Specification for Two-Part Connectors
with Assessed Quality, for Printed Boards,
for Basic Grid of 2,54 mm (0,1 in) with
Common Mounting Features IEC 60603-2:
1995; (
1998 Connectors for Frequencies Below 3
MHz for Use with Printed Boards Part 10:
Two-Part Connectors for Printed Boards for
Basic Grid of 2,54 mm (0,1 in), Inverted
Type IEC 60603-10: 1991; (S)
1999 Corr 1 Connectors for Frequencies
Below 3 MHz for use with Printed Boards Part 14: Detail Specification for Circular
Connectors for Low-Frequency Audio and
Video Applications such as Audio, Video and
Audio-Visual Equipment AMD 10776 Nov
1999; IEC 6
1993 Electrically Operated Food Preparation
Appliances - Measuring Methods
(Supersedes BS 3999: Part 3: 1967) (L)
1993 Amd 5 High-Pressure Sodium Vapour
Lamps AMD 9777; January 15, 1998;
Supersedes BS 6193: 1990; Superseded by
BS EN 62035: 2000; (E)
1993 Amd 6 High-Pressure Sodium Vapour
Lamps AMD 9934; April 1998; Supersedes
BS 6193: 1990; Superseded by BS EN
62035: 2000; (E)
2000 Ceramic and Glass Insulating Materials
Part 2: Methods of Test IEC 60672-2: 1999;
(F)
1998 Ceramic and Glass Insulating Materials
Part 3: Specifications for Individual Materials
IEC 60672-3: 1997; (F)
2002 Quartz Crystal Controlled Oscillators of
Assessed Quality - Part 3: Standard Outlines
and Lead Connections IEC 60679-3:2001 (T)
1996 Amd 1 Specification for Flexible
Insulating Sleeving Part 1: Definitions and
General Requirements (IEC 684-1: 1980)
(AMD 9073) June 15, 1996 (F)
2001 Fire Hazard Testing - Part 6-1: Smoke
Opacity - General Guidance IEC 60695-6-
BS EN 60684-3-100 TO 105
BS EN 60684-3-213
BS EN 60684-3-409
BS EN 60684-123 AND 124
BS EN 60695-2-2
BS EN 60695-2-2
BS EN 60695-2-10
BS EN 60695-2-11
BS EN 60695-2-12
1:2001; (G)
2002 Flexible Insulating Sleeving - Part 3:
Specifications for Individual Types of
Sleeving - Sheets 100 to 105: Extruded PVC
Sleeving Supersedes BS 6893-3-100 to 105:
1995; IEC 60684-3-100 to 105: 2001; (F)
1999 Flexible Insulating Sleeving - Part 3:
Specifications for Individual Types of
Sleeving - Sheet 213: Heat-Shrinkable
Polyolefin Sleeving, Not Flame Retarded,
Shrink Ratio 2:1 IEC 60684-3-213: 1998; (F)
1999 Flexible Insulating Sleeving - Part 3:
Specifications for Individual Types of
Sleeving - Sheet 409: Glass Textile Sleeving
with Polyurethane (PUR)- Based Coating
IEC 60684-3-409:1999; (F)
1995 Flexible Insulating Sleeving Part 3:
Specification Requirements for Individual
Types of Sleeving Sheets 123 and 124.
Extruded Silicone Sleeving, General Purpose
(IEC 684-3-123 and 124: 1992) (F)
1995 Amd 1 Fire Hazard Testing for
Electrotechnical Products Part 2: Test
Methods Section 2.2: Needle-Flame Test
(AMD 8624) June 15, 1995 (IEC 695-2-2:
1991) (Formerly BS 6458: Part 2: Section
2.2: 1993 Replaces BS 6458: Part 2
1995 Amd 1 Fire Hazard Testing for
Electrotechnical Products Part 2: Test
Methods Section 2.2: Needle-Flame Test
(IEC 695-2-2: 1991) (AMD 9176) November
15, 1996 (G) Section 2.2: 1984) (G)
2001 Fire Hazard Testing - Part 2-10:
Glowing/Hot-Wire Based Test Methods Glow-Wire Apparatus and Common Test
Procedure Supersedes BS EN 60695-21/0:1997; IEC 60695-2-10:2000; (G)
2001 Fire Hazard Testing - Part 2-11:
Glowing/Hot-Wire Based Test Methods Glow-Wire Flammability Test Method for
End-Products Supersedes BS EN 60695-21/1:1997; IEC 60695-2-11:2000; (G)
2001 Fire Hazard Testing - Part 2-12:
Glowing/Hot-Wire Based Test Methods Glow-Wire Flammability Test Method for
Materials Supersedes BS EN 60695-2-
BS EN 60695-2-13
BS EN 60695-8-1
BS EN 60700-1
BS EN 60704- 1
BS EN 60704-2-8
BS EN 60712
BS EN 60742
BS EN 60743
BS EN 60747-16-1
BS EN 60704-2-13
BS EN 60715
BS EN 60721-3-1
1/2:1996; IEC 60695-2-12:2000; (G)
2001 Fire Hazard Testing - Part 2-13:
Glowing/Hot-Wire Based Tests Methods Glow-Wire Ignitability Test Method for
Materials Supersedes BS EN 60695-21/3:1996; IEC 60695-2-13:2000; (G)
2001 Fire Hazard Testing - Part 8-1: Heat
Release - General Guidance IEC 60695-81:2001; (G)
1999 Thyristor Valves for High Voltage
Direct Current (HVDC) Power Transmission
- Part 1: Electrical Testing IEC 60700-1:
1998; (S)
1995 Test Code for the Determination of
Airborne Acoustical Noise Emitted by
Household and Similar Electrical Appliances
Part 1: General Requirements (Replaces BS
6686: Part 1: 1986) (F)
1997 Household and Similar Electrical
Appliances - Test Code for the Determination
of Airborne Acoustical Noise Part 2:
Particular Requirements for Electric Shavers
IEC 60704-2-8: 1997; (F)
1996 Helical-Scan Video-Tape Cassette
System Using 19 mm (3/4 in) Magnetic
Tape, Known as U-Format (IEC 712: 1993)
(S)
1996 Isolating Transformers and Safety
Isolating Transformers Requirements (E)
1997 Terminology for Tools and Equipment
to Be Used in Live Working IEC 743: 1983;
(G)
2002 Semiconductor Devices - Part 16-1:
Microwave Integrated Circuits - Amplifiers
(S)
2000 Household and Similar Electrical
Appliances - Test Code for the Determination
of Airborne Acoustical Noise - Part 2-13:
Particular Requirements for Range Hoods (F)
2001 Dimensions of Low-Voltage
Switchgear and Controlgear - Standardized
Mounting on Rails for Mechanical Support of
Electrical Devices in Switchgear and
Controlgear Installations IEC
60715:1981:+A1:1995; (E)
1997 Classification of Environmental
BS EN 60721-3-1
BS EN 60721-3-1
BS EN 60721-3-2
BS EN 60721-3-2
BS EN 60721-3-2
BS EN 60721-3-5
BS EN 60721-3-5
BS EN 60721-3-5
Conditions Part 3: Classification of Groups
of Environmental Parameters and Their
Severities Section 1: Storage IEC 60721-3-1:
1997; (G)
1993 Classification of Environmental
Conditions Part 3: Classification of Groups
of Environmental Parameters and Their
Severities Section 3.1: Storage (IEC 721-3-1:
1987) (AMD 7909) August 15, 1993
(Formerly BS 7527: Section 3.1: 1991) (G)
1993 Amd 1 Classification of Environmental
Conditions Part 3: Classification of Groups
of Environmental Parameters and Their
Severities Section 3.1: Storage (IEC 721-3-1:
1987) (AMD 8600) October 15, 1995
(Formerly BS 7527: Section 3.1: 1991) (G)
1997 Classification of Environmental
Conditions Part 3: Classification of Groups
of Environmental Parameters and Their
Severities Section 2: Transportation IEC
60721-3-2: 1997; (G)
1991 Amd 1 Classification of Environmental
Conditions Part 3: Classification of Groups
of Environmental Parameters and Their
Severities Section 3.2: Transportation (AMD
7955) September 15, 1993 (Formerly BS
7527: Section 3.2: 1991) (G)
1993 Amd 1 Classification of Environmental
Conditions Part 3: Classification of Groups
of Environmental Parameters and Their
Severities Section 3.2: Transportation (AMD
8601) October 15, 1995 (Formerly BS 7527:
Section 3.2: 1991) (G)
1997 Classification of Environmental
Conditions Part 3: Classification of Groups
of Environmental Parameters and Their
Severities Section 5: Ground Vehicle
Installations IEC 60721-3-5: 1997; (G)
1993 Amd 1 Classification of Environmental
Conditions Part 3: Classification of Groups
of Environmental Parameters and Their
Severities Section 3.5: Ground Vehicle
Installations (AMD 7956) September 15,
1993 (Formerly BS 7527:Section 3.5:
1991)G
1993 Amd 1 Classification of Environmental
BS EN 60721-3-6
BS EN 60721-3-6
BS EN 60749
BS EN 60749
BS EN 60730- 2-9
BS EN 60730-2-10
BS EN 60730-2-18
BS EN 60738-1
BS EN 60738-1-1
Conditions Part 3: Classification of Groups
of Environmental Parameters and Their
Severities Section 3.5: Ground Vehicle
Installations (AMD 8631) June 15, 1995
(Formerly BS 7527: Section 3.5: 1991) (G)
1993 Amd 1 Classification of Environmental
Conditions Part 3: Classification of Groups
of Environmental Parameters and Their
Severities Section 3.6: Ship Environment
(IEC 721-3-6 1987) (AMD 7948) August 15,
1993 (Formerly BS 7527: Section
3.6:1991)G
1993 Amd 2 Classification of Environmental
Conditions Part 3: Classification of Groups
of Environmental Parameters and Their
Severities Section 3.6: Ship Environment
AMD 9516; June 1997; Renumbers BS 7527:
Section 36: 1991; IEC 721-3-6: 1987; (G)
1999 Semiconductor Devices - Mechanical
and Climatic Test Methods Supersedes BS
6493-3: 1985; IEC 60749: 1996; (S)
1999 Amd 1 Semiconductor Devices Mechanical and Climatic Test Methods AMD
13129: September 2001; Supersedes BS
6493-3: 1985; IEC 60749: 1996; (S)
1995 Amd 1 Automatic Electrical Controls
for Household and Similar Use Part 2:
Particular Requirements Section 2.9:
Temperature Sensing Controls AMD 9408
March 1997; (L)
1995 Amd 1 Automatic Electrical Controls
for Household and Similar Use - Part 2:
Particular Requirements - Section 2.10 Motor
Starting Relays AMD 9206: December 1996;
(L)
1999 Automatic Electrical Controls for
Household and Similar Use - Part 2:
Particular Requirements for Automatic
Electrical Water and Air Flow Sensing
Controls, Including Mechanical
Requirements IEC 60730-2-18: 1997; (L)
1999 Thermistors - Directly Heated Positive
Step-Function Temperature Coefficient - Part
1: Generic Specification Supersedes BS EN
144000: 1994; IEC 60738-1: 1998; (S)
1999 Thermistors - Directly Heated Positive
BS EN 60738-1-2
BS EN 60738-1-3
BS EN 60738-1-4
BS EN 60950
BS EN 60811-4-2
BS EN 60811-5-1
BS EN 60825-1
BS EN 60825-1
BS EN 60834-1
Step-Function Temperature Coefficient - Part
1-1: Blank Detail Specification - Current
Limiting Application - Assessment Level EZ
Supersedes BS EN 144001: 1995; IEC
60738-1-1: 1998; (T)
1999 Thermistors - Directly Heated Positive
Step-Function Temperature Coefficient - Part
1-2: Blank Detail Specification - Heating
Element Application - Assessment Level EZ
Supersedes BS EN 144002: 1995; IEC
60738-1-2: 1998; (T)
1999 Thermistors - Directly Heated Positive
Step-Function Temperature Coefficient - Part
1-3: Blank Detail Specification - Inrush
Current Application - Assessment Level EZ
Supersedes BS EN 144003: 1995; IEC
60738-1-3: 1998; (T)
1999 Thermistors - Directly Heated Positive
Step-Function Temperature Coefficient - Part
1-4: Blank Detail Specification - Sensing
Application - Assessment Level EZ
Supersedes BS EN 144004: 1995; IEC
60738-1-4: 1998; (T)
(FAULTY STANDARD) 2000 Safety of
Information Technology Equipment (S)
2000 Insulating and Sheathing Materials of
Electric and Optical Fibre Cables - Common
Test Methods - Part 4-2: Methods Specific to
Polyethylene and Polypropylene Compounds
- Tensile Strength and Elongation at Break
After Pre-Conditioning - Wrapping Test A
2000 Insulating and Sheathing Materials of
Electric Cables Part 5: Methods Specific to
Filling Compounds - Drop Point - Separation
of Oil - Lower Temperature Brittleness Total Acid Number - Absence of Corrosive
Components - Permittivity at 23 Degrees C
1994 Safety of Laser Products Part 1:
Equipment Classification, Requirements and
User's Guide (IEC 825-1: 1993) (Replaces
BS EN 60825: 1992) (N)
1994 Amd 2 Safety of Laser Products Part 1:
Equipment Classification, Requirements and
User's Guide AMD 9505; June 1997; (N)
2000 Teleprotection Equipment of Power
Systems - Performance and Testing - Part 1:
BS EN 60843-3
BS EN 60819-3-1
BS EN 60819-3-4
BS EN 60821
BS EN 60825-1
BS EN 60831-2
BS EN 60832
BS EN 60835-1-1
BS EN 60835-1-2
Command Systems IEC 60834-1:1999; (G)
1993 Helical-Scan Video Tape Cassette
System Using 8 mm Magnetic Tape - 8 mm
Video Part 3: High-Band Specifications for
Hi 8 (IEC 843-3: 1993) (S)
2001 Non-Cellulosic Papers for Electrical
Purposes - Part 3: Specifications for
Individual Materials - Sheet 1: Filled Glass
Paper IEC 60819-3-1:2001; (F)
2002 Non-Cellulosic Papers for Electrical
Purposes - Part 3: Specifications for
Individual Materials - Sheet 4: Aramid Fibre
Paper Containing Not More Than 50% of
Mica Particles IEC 60819-3-4: 2001; (F)
1995 Amd 0 IEC 821 VMEbus Microprocessor System Bus for 1 Byte to 4
Byte Data (AMD 8349) February 15, 1995
(Formerly BS IEC 821: 1991 Replaces BS
7242: 1990) (S)
1994 Amd 1 Safety of Laser Products Part 1:
Equipment Classification, Requirements and
User's Guide (IEC 825-1: 1993) (AMD 9019)
April 15, 1996 (Replaces BS EN 60825:
1992) (N)
1996 Shunt Power Capacitors of the SelfHeating Type for a.c. Systems Having a
Rated Voltage up to and Including 1 kV Part
2: Ageing Test, Self-Healing Test and
Destruction Test Supersedes BS 1650: 1971;
IEC 831-2: 1995; (S)
1997 Amd 1 Insulating Poles (Insulating
Sticks) and Universal Tool Attachments
(Fittings) for Live Working AMD 9358
March 15, 1997; Renumbering BS 7692 :
1993; (F)
1994 Amd 1 Methods of Measurement for
Equipment Used in Digital Microwave Radio
Transmission Systems Part 1: Measurements
Common to Terrestrial Radio-Relay Systems
and Satellite Earth Stations Section 1.1:
General (IEC 835-1-1: 1990) (AMD 8338)
December 1
1995 Methods of Measurement for
Equipment Used in Digital Microwave Radio
Transmission Systems Pt 1: Meas. Common
To Terrestrial Radio-Relay Systems and
BS EN 60835-1-2
BS EN 60835-1-3
BS EN 60835-1-4
BS EN 60835-2-1
BS EN 60835-2-2
BS EN 60843-4
BS EN 60869-1
BS EN 60870-5-3
Satellite Earth Stations Section 1.2: Basic
Char. IEC 835-1-2: 1992; Also Numbered BS
7573: Part 1: Se
1995 Amd 1 Methods of Measurement for
Equipment Used in Digital Microwave Radio
Transmission Systems Part 1: Measurements
Common to Terrestrial Radio-Relay Systems
and Satellite Earth Stations Section 1.2 Basic
Characteristics Amd 9600; September 1997;
Re
1997 Amd 1 Methods of Measurement for
Equipment Used in Digital Microwave Radio
Transmission Systems Part 1: Measurements
Common to Terrestrial Radio-Relay Systems
and Satellite Earth Stations Section 1.3:
Transmission Characteristics AMD 9599;
September
1997 Amd 1 Methods of Measurement for
Equipment Used in Digital Microwave Radio
Transmission Systems Part 1: Measurements
Common to Terrestrial Radio-Relay Systems
and Satellite Earth Stations Section 1.4:
Transmission Performance AMD 9594;
September 1997
1994 Amd 1 Methods of Measurement for
Equipment Used in Digital Microwave Radio
Transmission Systems Part 2: Measurements
on Terrestrial Radio-Relay Systems Section
2.1: General (AMD 8339) December 15,
1994 (IEC 835-2-1: 1990) (Also Numbered
BS 7573: Part
1995 Methods of Measurement for
Equipment Used in Digital Microwave Radio
Transmission Systems Part 2: Measurements
on Terrestrial Radio-Relay Systems Section
2.2: Antenna (IEC 835-2-2: 1994)(Also
Numbered BS 7573: Part 2 Section 2.2:
1995) (S)
2001 Helical-Scan Video Tape Cassette
System Using 8 mm Magnetic Tape (8 mm
Video) - Part 4: Video Subcode (VSC) IEC
60843-4:2000; (S)
2000 Fibre Optic Attenuators - Part 1:
Generic Specification Supersedes BS EN
180000: 1996; IEC 60869-1:1999; (S)
1992 Telecontrol Equipment and Systems
BS EN 60835-2-3
BS EN 60835-2-9
BS EN 60835-2-11
BS EN 60835-3-1
BS EN 60835-3-2
BS EN 60835-3-4
BS EN 60835-3-5
Part 5: Transmission Protocols Section 5.3:
Specification for General Structure of
Application Data
1995 Amd 1 Methods of Measurement for
Equipment Used in Digital Microwave Radio
Transmission Systems Part 2: Measurements
on Terrestrial Radio-Relay Systems Section
2.3: RF Branching Networks (IEC 835-2-3:
1992) (AMD 8692) August 15, 1995 (Also
Numbered B
1997 Methods of Measurement for
Equipement Used in Digital Microwave
Radio Transmission Systems Part 2:
Measurements on Terrestrial Radio-Relay
Systems Section 2.9 Service Channels IEC
835-2-9: 1995; (S)
1997 Methods of Measurement for
Equipment Used in Digital Microwave Radio
Transmission Systems Part 2: Measurements
on Terrestrial Radio-Relay Systems Section
11: Cross-Polarization Interference Canceller
IEC 835-2-11: 1996; (S)
1994 Amd 1 Methods of Measurement for
Equipment Used in Digital Microwave Radio
Transmission Systems Part 3: Measurements
on Satellite Earth Stations Section 3.1:
General (IEC 835-3-1: 1990) (AMD 8340)
October 15, 1994 (Formerly BS 7573: Part 3:
Section 3
1996 Methods of Measurement for
Equipment Used in Digital Microwave Radio
Transmission Systems Part 3: Measurements
on Satellite Earth Stations Section 3.2:
Antenna (IEC 835-3-2: 1995) (S)
1997 Methods of Measurement for
Equipment Used in Digital Microwave Radio
Transmission Systems Part 3: Measurements
on Satellite Earth Stations Section 3.4 Low
Noise Amplifier Renumbers BS 7573:
Section 3.4: 1993; IEC 835-3-4: 1993; (S)
1995 Methods of Measurement for
Equipment Used in Digital Microwave Radio
Transmission Systems Part 3: Measurements
on Satellite Earth Stations Section 3.5: upand Down-Converters (IEC 835 -3-5: 1994)
(Also Numbered BS 7573: Part 3 Section 3.5:
BS EN 60835-3-6
BS EN 60835-3-7
BS EN 60835-3-9
BS EN 60835-3-10
BS EN 60835-3-11
BS EN 60870-5-5
BS EN 60895
BS EN 60898-2
BS EN 60835-3-12
1995) (S)
1997 Methods of Measurement for
Equipment Used in Digital Microwave Radio
Transmission Systems Part 3: Measurements
on Satellite Earth Stations Section 3.6: HighPower Amplifiers IEC 835-3-6: 1996 (S)
1996 Methods of Measurement for
Equipment Used in Digital Microwave Radio
Transmission Systems Part 3: Measurements
on Satellite Earth Stations Section 3.7:
Figure-of-Merit of Receiving System IEC
835-3-7: 1995 (S)
1995 Methods of Measurement for
Equipment Used in Digital Microwave Radio
Transmission Systems Part 3: Measurements
on Satellite Earth Stations Section 3.9:
Terminal Equipment SCPC-PSK (IEC 835-39: 1993) (S)
1995 Methods of Measurement for
Equipment Used in Digital Microwave Radio
Transmission Systems Part 3: Measurements
on Satellite Earth Stations Section 3.10:
Terminal Equipment - TDMA Traffic Earth
Station (IEC 835-3 10: 1994) (Also
Numbered BS 7573: Part
1996 Methods of Measurement for
Equipment Used in Digital Microwave Radio
Transmission Systems Part 3: Measurements
on Satellite Earth Stations Section 3.11:
Service Channel Equipment for SCPC-PSK
Transmissions (IEC 835-3-11: 1995) (S)
1996 Telecontrol Equipment and Systems
Part 5: Transmission Protocols Section 5:
Basic Application Functions (IEC 870-5-5:
1995) (S)
1997 Amd 1 Conductive Clothing for Live
Working at a Nominal Voltage up to 800 kV
a.c. AMD 9368 March 15, 1997;
Renumbering BS 7696 : 1993; (N)
2001 Circuit-Breakers for Overcurrent
Protection for Household and Similar
Installations - Part 2: Circuit-Breakers for
A.C. and D.C. Operation (E)
1997 Methods of Measurement for
Equipment Used in Digital Microwave Radio
Transmission Systems Part 3: Measurements
BS EN 60835-3-13
BS EN 60835-3-14
BS EN 60843-1
BS EN 60843-2 PART 2
BS EN 60864-2
BS EN 60865-1
BS EN 60870-2-1
BS EN 60870-2-2
on Satellite Earth Stations Section 3.1
Overall System Performance Renumbers BS
7573: Section 3.12: 1993; IEC 835-3-12:
1993; (S)
1997 Methods of Measurement for
Equipment Used in Digital Microwave Radio
Transmission Systems Part 3: Measurements
on Satellite Earth Stations Section 3.13:
VSAT Systems IEC 835-3-13: 1996; (S)
1997 Methods of Measurement for
Equipment Used in Digital Microwave Radio
Transmission Systems Part 3: Measurements
on Satellite Earth Stations Section 3.14: Earth
Stations for Satellite News Gathering (SNG)
IEC 835-3-14: 1996; (S)
1994 Helical-Scan Video Tape Cassette
System Using 8 mm Magnetic Tape - 8 mm
Video Part 1: General Specifications (IEC
843-1: 1993) (Replaces BS 7065: 1989) (S)
1995 Amd 1 Helical-Scan Video Tape
Cassette System Using 8 mm Magnetic Tape
- 8 mm Video Part 2: PCM Multi-Track
Audio System (IEC 843-2: 1992) (AMD
8874) November 15, 1995 (Also Numbered
BS 7065: Part 2: 1994) (S)
1997 Standardization of Interconnections
between Broadcasting Transmitters or
Transmitter Systems and Supervisory
Equipment Part 2: Interface Standards for
Systems Using Data Bus Type
Interconnections IEC 60864-2: 1997; (S)
1994 Amd 1 Short-Circuit Currents Calculation of Effects Part 1: Definitions and
Calculation Methods (AMD 8218) August
15, 1994 (IEC 865-1: 1993) (Formerly BS
7726: Part 1: 1994) (E)
1996 Telecontrol Equipment and Systems
Part 2: Operating Conditions Section 1:
Power Supply and Electromagnetic
Compatibility IEC 870-2-1: 1995;
Supersedes BS 7404: Part 2: Section 2.1:
1991; (S)
1997 Telecontrol Equipment and Systems
Part 2: Operating Conditions Section 2:
Environmental Conditions (Climatic,
Mechanical and Other Non-Electrical
BS EN 60870-5-1
BS EN 60870-5-2
BS EN 60870-5-101
BS EN 60870-5-101
BS EN 60874-1
BS EN 60874-19
BS EN 60876-1
BS EN 60891
BS EN 60870-5-102
BS EN 60870-5-103
BS EN 60870-5-104
Influences) IEC 870-2-2: 1996; (S)
1994 Amd 1 Telecontrol Equipment and
Systems Part 5: Transmission Protocols
Section 5.1: Transmission Frame Formats
(AMD 8113) March 15, 1994 (IEC 870-5-1:
1990) (Formerly BS 7404: Section 5.1: 1991)
(S)
1994 Amd 1 Telecontrol Equipment and
Systems Part 5: Transmission Protocols
Section 5.2: Link Transmission Procedures
(AMD 8114) March 15, 1994 (IEC 870-5-2:
1992) (Formerly BS 7404: Section 5.2:
1992)(S)
1996 Amd 1 Telecontrol Equipment and
Systems - Part 5-101: Transmission Protocols
- Companion Standard for Basic Telecontrol
Tasks AMD 13343: January 25, 2002; IEC
870-5-101: 1995; (S)
1996 Telecontrol Equipment and Systems Part 5: Transmission Protocols - Section 101:
Companion Standard for Basic Telecontrol
Tasks IEC 870-5-101: 1995; (S)
1999 Connectors for Optical Fibres and
Cables - Part 1: Generic Specification IEC
60874-1:1999; (T)
1997 Connectors for Optical Fibres and
Cables Part 19: Sectional Specification for
Fibre Optic Connector - Type SC-D (Duplex)
IEC 60874-19: 1995; (T)
2001 Fibre Optic Spatial Switches - Part 1:
Generic Specification IEC 60876-1:2001; (S)
1995 Procedures for Temperature and
Irradiance Corrections to Measured I-V
Characteristics of Crystalline Silicon
Photovoltaic Devices (IEC 891: 1987) (S)
1997 Telecontrol Equipment and Systems
Part 5: Transmission Protocols Section 102:
Companion Standard for the Transmission of
Integrated Totals in Electric Power Systems
(S)
1998 Telecontrol Equipment and Systems Part 5-103: Transmission Protocols Companion Standard for the Informative
Interface of Protection Equipment IEC
60870-5-103: 1997; (S)
2001 Telecontrol Equipment and Systems -
BS EN 60870- 6-2
BS EN 60870-6-502
BS EN 60870-6-601
BS EN 60872-3
BS EN 60873
BS EN 60893-3-5
BS EN 60893-3-5
Part 5-104: Transmission Protocols Network Access for IEC 60870-5-101 Using
Standard Transport Profiles IEC 60870-5104: 2000; (S)
1996 Telecontrol Equipment and Systems
Part 6: Telecontrol Protocols Compatible
with ISO Standards and ITU-T
Recommendations Section 2: Use of Basic
Standards (OSI Layers 1-4) (IEC 870-6-2:
1995) (S)
1996 Telecontrol Equipment and Systems
Part 6: Telecontrol Protocols Compatible
with ISO Standards and ITU-T
Recommendations Section 502: TASE.1
Protocol Definitions (IEC 870-6-502: 1995)
(S)
1995 Telecontrol Equipment and Systems
Part 6: Telecontrol Protocols Compatible
with ISO Standards and ITU-T
Recommendations Section 601: Functional
Profile for Providing the ConnectionOriented Transport Service in End System
Connected via Permanent Acce
2001 Maritime Navigation and
Radiocommunication Equipment and
Systems - Radar Plotting Aids Part 3:
Electronic Plotting Aid (EPA) - Performance
Requirements - Methods of Testing and
Required Test Results IEC 60872-3:2000;
(Q)
1993 Amd 2 Methods of Evaluating the
Performance of Electrical and Pneumatic
Analogue Chart Recorders for Use in
Industrial- Process Control Systems
(Formerly BS 4671: 1987 Replaces BS 4671:
1971) (Q)
1995 Industrial Rigid Laminated Sheets
Based on Thermosetting Resins for Electrical
Purposes Part 3: Specifications for Individual
Materials Sheet 5. Requirements for Rigid
Laminated Sheets Based on Polyester Resins
(IEC 893-3-5: 1993) (F)
1995 Amd 1 Industrial Rigid Laminated
Sheets Based on Thermosetting Resins for
Electrical Purposes Part 3: Specifications for
Individual Materials Sheet 5: Requirements
BS EN 60904-3
BS EN 60904-5
BS EN 60904-6
BS EN 60908
BS EN 60909-0
BS EN 60938-1
BS EN 60938-2
BS EN 60917-2-1
BS EN 60917-2-2
BS EN 60931-2
for Rigid Laminated Sheets Based on
Polyester Resins (IEC 893-3-5: 1993) (AMD
9172) Au
1993 Photovoltaic Devices Part 3:
Measurement Principles for Terrestrial
Photovoltaic (PV) Solar Devices with
Reference Spectral Irradiance Data (IEC 9043: 1989)
1996 Photovoltaic Devices Part 5:
Determination of the Equivalent Cell
Temperature (ECT) of Photovoltaic (PV)
Devices by the Open-Circuit Voltage Method
(IEC 904-5: 1993) (S)
1995 Photovoltaic Devices Part 6:
Requirements for Reference Solar Modules
(IEC 904-6: 1994) (S)
1999 Audio Recording - Compact Disc
Digital Audio System IEC 60908: 1999; (S)
2001 Short-Circuit Currents in Three-Phase
a.c. Systems Part 0: Calculation of Currents
IEC 60909-0:2001; (E)
2000 Fixed Inductors for Electromagnetic
Interference Suppression - Part 1: Generic
Specificaion Supersedes BS EN 138000:
1997; IEC 60938-1:1999; (T)
2000 Fixed Inductors for Electromagnetic
Interference Suppression - Part 2: Sectional
Specification Supersedes BS EN 138100:
1997; IEC 60938-2: 1999; (T)
1997 Modular Order for the Development of
Mechanical Structures for Electronic
Equipment Practices Part 2: Sectional
Specification - Interface Co-Ordination
Dimensions for the 25 mm Equipment
Practice Section 1: Detail Specification Dimensions for Cabin
1997 Modular Order for the Development of
Mechanical Structures for Electronic
Equipment Practices Part 2: Sectional
Specification - Interface Co-Ordination
Dimensions for the 25 mm Equipment
Practice Section 2: Detail Specification Dimensions for Subra
1996 Shunt Power Capacitors of the NonSelf-Healing Type for a.c. Systems Having a
Rated Voltage up to and Including 1 kV Part
BS EN 60933-4
BS EN 60933-5
BS EN 60936-1
BS EN 60317-22
BS EN 60317-22
BS EN 60317-23
BS EN 60317-23
BS EN 60317-23
2: Ageing Test and Destruction Test
Supersedes BS 1650: 1971; IEC 931-2: 1995;
(S)
1994 Audio, Video and Audiovisual Systems
- Interconnections and Matching Values Part
4: Connector and Cordset for Domestic
Digital Bus (D2B) (IEC 933-4: 1994) (S)
1993 Audio, Video and Audiovisual Systems
- Interconnections and Matching Values Part
5: Specification for Y/C Connector for Video
Systems - Electrical Matching Values and
Description of the Connector (IEC 933-5:
1992) (S)
2000 Maritime Navigation and
Radiocommunication Equipment and
Systems - Radar - Part 1: Shipborne Radar Performance Requirements - Methods of
Testing and Required Test Results IEC
60936-1: 1999; Supersedes BS EN
60936:1993; (Q)
1996 Specifications for Particular Types of
Winding Wires Part 22: Polyester and
Polyesterimide Enamelled Round Copper
Wire Overcoated with Polyamide, Class 180
IEC 60317-22: 1990; (E)
1996 Amd 1 Specifications for Particular
Types of Winding Wires Part 22: Polyester
and Polyesterimide Enamelled Round Copper
Wire Overcoated with Polyamide, Class 180
AMD 9064; April 1996; Renumbers BS
6811: Section 3.10: 1993; IEC 60317-22:
1990; (E)
1996 Particular Types of Winding Wires Part
23: Solderable Polyesterimide Enamelled
Round Copper Wire, Class 180 IEC 6031723: 1990; (E)
1996 Amd 2 Specifications for Particular
Types of Winding Wires - Part 23:
Solderable Polyesterimide Enamelled Round
Copper Wire, Class 180 AMD 9058; April
1996; Renumbers BS 6811: Section 3.11:
1993; 10329 April 1999:10941 August 2000 :
IEC 60317-23: 199
1996 Amd 2 Specifications for Particular
Types of Winding Wires - Part 23:
Solderable Polyesterimide Enamelled Round
BS EN 60317-25
BS EN 60317-25
BS EN 60317-51
BS EN 60118-12
BS EN 60127-10
BS EN 60317-26
BS EN 60317-26
BS EN 60317-28
BS EN 60317-39
BS EN 60317-39
Copper Wire, Class 180 AMD 10941; August
2000; Renumbers BS 6811: Section 3.11:
1993; IEC 60317-23: 1990;(E)
1997 Particular Types of Winding Wires Part
25: Polyester or Polyesterimide Overcoated
with Polyamide-Imide Enamelled Round
Aluminium Wire, Class 200 Renumbers BS
6811: Section 5.3: 1993; IEC 317-25: 1990;
(E)
1997 Amd 1 Specifications for Particular
Types of Winding Wires Part 25: Polyester or
Polyesterimide Overcoated with PolyamideImide Enamelled Round Aluminium Wire,
Class 200 AMD 10307; May 1999;
Renumbers BS 6811: Section 5.3: 1993; IEC
60317-25: 1990; (
2001 Particular Types of Winding Wires Part 51: Solderable Polyurethane Enamelled
Round Copper Wire, Class 180 IEC 6031751:2001; (E)
1997 Hearing Aids Part 12: Dimensions of
Electrical Connector Systems IEC 60118-12:
1996; Supersedes BS 2813: 1981; (N)
2002 Miniature Fuses - Part 10: User Guide
for Miniature Fuses IEC 60127-10:2001; (E)
1997 Particular Types of Winding Wires Part
26: Polyamide-Imide Enamelled Round
Copper Wire, Class 200 IEC 317-26: 1990;
Renumbers BS 6811: Sec 3.12; 1993; (E)
1997 Amd 1 Specifications for Particular
Types of Winding Wires Part 26: PolyamideImide Enamelled Round Copper Wire, Class
200 AMD 10330; May 1999; Renumbers BS
6811: Sec 3.12; 1993; IEC 60317-26: 1990;
(E)
1997 Particular Types of Winding Wires Part
28: Polyesterimide Enamelled Rectangular
Copper Wire, Class 180 IEC 317-28: 1990;
Renumbers BS 6811 SEC 4.3: 1991; (E)
1995 Particular Types of Winding Wires Part
39: Glass-Fibre Braided, Polyester or
Polyesterimide Varnish- Treated, Bare or
Enamelled Rectangular Copper Wire,
Temperature Index 180 (E)
1995 Amd 1 Specifications for Particular
Types of Winding Wires Part 39: Glass-Fibre
BS EN 60317-40
BS EN 60317-40
BS EN 60317-48
BS EN 60317-49
BS EN 60317-50
BS EN 60317-52
BS EN 60317-53
BS EN 60322
Braided Resin or Varnish Impregnated, Bare
or Enamelled Rectangular Copper Wire,
Temperature Index 180 AMD 10335; July
1999; Renumbers BS 6811: Section 7.1:
1993; IEC 603
1995 Particular Types of Winding Wires Part
40: Glass-Fibre Braided, Silicone VarnishedTreated, Bare or Enamelled Rectangular
Copper Wire, Temperature Index 200 (E)
1995 Amd 1 Specifications for Particular
Types of Winding Wires Part 40: Glass-Fibre
Braided Resin or Varnish Impregnated, Bare
or Enamelled Rectangular Copper Wire,
Temperature Index 200 AMD 10336; July
1999; Renumbers BS 6811: Section 7.2:
1993; (E)
2000 Specifications for Particular Types of
Windind Wires -Part 48: Glass-Fibre Wound
Resin or Varnish Impregnated, Bare or
Enamelled Round Copper Wire, Temperature
Index 155 IEC 60317-48:1999; (E)
2000 Specifications for Particular Types of
Windind Wires - Part 49: Glass-Fibre Wound
Resin or Varnish Impregnated, Bare or
Enamelled Round Copper Wire, Temperature
Index 180 IEC 60317-49:1999; (E)
2000 Specifications for Particular Types of
Winding Wires - Part 50: Glass-Fibre Wound
Resin or Varnish Impregnated, Bare or
Enamelled Round Copper Wire, Temperature
Index 200 IEC 60317-50:1999; (E)
1999 Specifications for Particular Types of
Winding Wires - Part 52: Aromatic
Polyamide (Aramid) Tape Wrapped Round
Copper Wire, Temperature Index 220 IEC
60317-52: 1999; (E)
1999 Specifications for Particular Types of
Winding Wires - Part 53: Aromatic
Polyamide (Aramid) Tape Wrapped
Rectangular Copper Wire, Temperature
Index 220 IEC 60317-53: 1999; (E)
2001 Railway Applications - Electric
Equipment for Rolling Stock - Rules for
Power Resistors of Open Construction IEC
60322: 2001; Supersedes BS 4846:
1972(1990); (Q)
BS EN 60118-7
BS EN 60129
BS EN 60129
BS EN 45502-1
BS EN 60118-7
BS EN 60130-17
BS EN 45503
BS EN 45510-1
BS EN 45510-2-2
BS EN 45510-2-3
BS EN 45510-2-4
1993 Hearing Aids Part 7: Methods for
Measurement of the Performance
Characteristics of Hearing Aids for Quality
Inspection on Delivery IEC 60118-7: 1983;
Formerly BS 6083: Part 7: 1985; (N)
1994 Alternating Current Disconnectors and
Earthing Switches (IEC 129: 1984) (Replaces
BS 5253: 1990) (E)
1994 Amd 1 Alternating Current
Disconnectors and Earthing Switches IEC
129: 1984; AMD 9402; March 15, 1997; (E)
1998 Active Implantable Medical Devices
Part 1: General Requirements for Safety,
Marking and Information to be Provided by
the Manufacturer (N)
1993 Amd 1 Hearing Aids Part 7: Methods
for Measurement of the Performance
Characteristics of Hearing Aids for Quality
Inspection on Delivery (IEC 118-7: 1983)
(AMD 8253) July 15, 1994 (Formerly BS
6083: Part 7: 1985) (N)
1999 Connectors for Frequencies Below 3
MHz - Part 17: Detail Specification for
Interconnection Devices Which Permit MultiDirectional Mating, For Use with
Rechargeable Batteries IEC 60130-17: 1998;
(S)
1996 Attestation Standard for the Assessment
of Contract Award Procedures of Entities
Operating in the Water, Energy, Transport
and Telecommunication Sectors (G)
1998 Guide for Procurement of Power
Station Equipment Part 1: Common Clauses
(Q)
1999 Guide for Procurement of Power
Station Equipment - Part 2: Electrical
Equipment - Section 2: Uninterruptible
Power Supplies (Q)
2000 Guide for Procurement of Power
Station Equipment - Part 2-3: Electrical
Equipment - Stationary Batteries and
Chargers (Q)
2000 Guide for Procurement of Power
Station Equipment - Part 2-4: Electrical
Equipment - High Power Static Convertors
(Q)
BS EN 45510-2-4
BS EN 45510-2-6
BS EN 45510-3-1
BS EN 45510-3-2
BS EN 45510-3-3
BS EN 45510-4-1
BS EN 45510-4-2
BS EN 45510-4-3
BS EN 60335-2-16
BS EN 60335-2-34
BS EN 60335-2-34
BS EN 60335-2-65
BS EN 60335-2-78
2000 Corr 1 Guide for Procurement of Power
Station Equipment - Part 2-4: Electrical
Equipment - High Power Static Convertors
CORR 11040; August 2000; (Q)
2000 Guide for Procurement of Power
Station Equipment - Part 2-6: Electrical
Equipment - Generators (Q)
2000 Guide for Procurement of Power
Station Equipment - Part 3-1: Boilers - Water
Tube Boilers (Q)
2000 Guide for Procurement of Power
Station Equipment - Part 3-2: Boilers - Shell
Boilers (Q)
2000 Guide for Procurement of Power
Station Equipment - Part 3-3: Boilers Boilers with Fluidized Bed Firing (Q)
1999 Guide for Procurement of Power
Station Equipment - Part 4: Boiler
Auxiliaries - Section 1: Equipment for
Reduction of Dust Emissions (Q)
1999 Guide for Procurement of Power
Station Equipment - Part 4: Boiler
Auxiliaries - Section 2: Gas-Air, Steam-Air
and Gas-Gas Heaters (Q)
1999 Guide for Procurement of Power
Station Equipment - Part 4: Boiler
Auxiliaries - Section 3: Draught Plant (Q)
1997 Specification for Safety of Household
and Similar Electrical Appliances Part 2:
Particular Requirements Section 2.16 Food
Waste Disposers Supersedes BS 3456: Part
202: Section 202.16: 1994; (L)
2000 Safety of Household and Similar
Electrical Appliances Part 2:34 Particular
Requirements Motor-Compressors IEC 3352-34: 1999; (L)
1997 Safety of Household and Similar
Electrical Appliances Part 2: Particular
Requirements Section 2.34 MotorCompressors IEC 335-2-34: 1996; (L)
1996 Safety of Household and Similar
Electrical Appliances Part 2: Particular
Requirements Section 2.65: Air-Cleaning
Appliances (L)
1997 Safety of Household and Similar
Electrical Appliances Part 2. Particular
BS EN 60335-2-86
BS EN 60335-2-65
BS EN 60335- 2-69
BS EN 60335-2-74
BS EN 60335-2-76
BS EN 60335-2-82
BS EN 60335-2-87
BS EN 60335-2-97
BS EN 60336
BS EN 60349-1
Requirements Section 2.78 Outdoor
Barbecues IEC 335-2-78: 1995; (L)
2001 Safety of Household and Similar
Electrical Appliances - Part 2-86: Particular
Requirements for Electric Fishing Machines
(L)
1996 Amd 1 Safety of Household and Similar
Electrical Appliances - Part 2-65: Particular
Requirements for Air-Cleaning Appliances
AMD 13136: August 31, 2001; (L)
1996 Safety of Household and Similar
Electrical Appliances Part 2: Particular
Requirements Section 2.69: Wet and Dry
Vacuum Cleaners, Including Power Brush,
for Industrial and Commercial Use (L)
1996 Safety of Household and Similar
Electrical Appliances Part 2: Particular
Requirements Section 2.74 Portable
Immersion Heaters Supersedes BS 34563.21: 1981; IEC 335-2-74: 1996; (L)
1999 Safety of Household and Similar
Electrical Appliances - Part 2-76: Particular
Requirements for Electric Fence Energizers
Supersedes BS EN 61011:1993, BS EN
61011-1:1993, BS EN 61011-2:1993 and
Their Amendments; (L)
2000 Safety of Household and Similar
Electrical Appliances - Part 2-82: Particular
Requirements for Service Machines and
Amusement Machines IEC 60335-2-82:1999;
(L)
1999 Safety of Household and Similar
Electrical Appliances - Part 2-87: Particular
Requirements for Electric Animal-Stunning
Equipment Supersedes BS 7314: 1990; IEC
60335-2-87: 1998; (L)
2001 Safety of Household and Similar
Electrical Appliances - Part 2-97: Particular
Requirements for Drives for Rolling Shutters,
Awnings, Blinds and Similar Equipment (E)
1995 Amd 1 X-Ray Tube Assemblies for
Medical Diagnosis Characteristics of Focal
Spots (IEC 336: 1993) (AMD 8835) October
15, 1995 (N)
2000 Electric Traction - Rotating Electrical
Machines for Rail and Road Vehicles - Part
BS EN 60349-2
BS EN 60360
BS EN 60368-1
BS EN 60368-1
BS EN 60368-2-2
BS EN 60368-3
BS EN 60368-4
BS EN 60371- 1
BS EN 60384-1
BS EN 60400
BS EN 60368-4-1
BS EN 60384-20
1: Machines Other Than Electronic
Convertor-Fed Alternating Current Motors
Supersedes BS 173-1: 1992; IEC 603491:1999; (E)
2001 Railway Applications - Rotating
Electrical Machines for Rail and Road
Vehicles - Part 2: Electronic Convertor-Fed
Alternating Current Motors Supersedes DD
ENV 60349-2:1994; (E)
1999 Standard Method of Measurement of
Lamp Cap Temperature Rise Supersedes BS
5371: 1990; IEC 60360: 1998; (E)
2000 Piezoelectric Filters of Assessed
Quality - Part 1: Generic Specification IEC
60368-1: 2000; Supersedes BS EN 167000:
1993; (T)
2000 Corr 1 Piezoelectric Filters of Assessed
Quality - Part 1: Generic Specification
CORR 13166:October 12,2001; IEC 603681:2000; Supersedes BS EN 167000:1993; (T)
1999 Piezoelectric Filters - Part 2: Guide to
the Use of Piezoelectric Filters - Section 2:
Piezoelectric Ceramic Filters IEC 60368-2-2:
1996; (T)
2002 Piezoelectric Filters of Assessed
Quality - Part 3: Standard Outlines and Lead
Connections IEC 60368-3: 2001; Supersedes
BS 5069-2: 1983; (T)
2001 Piezoelectric Filters of Assessed
Quality - Part 4: Sectional Specification Capability Approval IEC 60368-4:2000;
Supersedes BS EN 167100:1996; (T)
1995 Insulating Materials Based on Mica
Part 1: Definitions and General Requirements
(IEC 371-1: 1980) (Replaces BS 6236: Part
1: 1982) (F)
2001 Fixed Capacitors for Use in Electronic
Equipment Part 1: Generic Specification (T)
2000 Lampholders for Tubular Fluorescent
Lamps and Starterholders IEC 60400:1999;
(E)
2001 Piezoelectric Filters of Assessed
Quality - Part 4-1: Blank Detail Specification
- Capability Approval IEC 60368-4-1: 2000;
Supersedes BS EN 167101: 1996; (T)
1999 Fixed Capacitors for Use in Electronic
BS EN 60384-20-1
BS EN 60400
BS EN 60400
BS EN 60400
BS EN 60404-4
BS EN 60406
BS EN 60420
BS EN 60424-3
BS EN 60424-3
BS EN 60424-4
BS EN 60439-1
BS EN 60439-1
Equipment - Part 20: Sectional Specification:
Fixed Metallized Polyphenylene Sulfide Film
Dielectric Surface Mount d.c. Capacitors IEC
60384-20: 1996; (T)
1999 Fixed Capacitors for Use in Electronic
Equipment - Part 20: Blank Detail
Specification: Fixed Metallized
Polyphenylene Sulfide Film Dielectric
Surface Mount d.c. Capacitors - Assessment
Level EZ IEC 60384-20-1: 1996; (T)
1996 Lampholders for Tubular Fluorescent
Lamps and Starterholders (E)
1996 Amd 1 Lampholders for Tubular
Fluorescent Lamps and Starterholders AMD
9670; December 15, 1997; (E)
1996 Amd 2 Lampholders for Tubular
Fluorescent Lamps and Starterholders AMD
9978; May 1998; (E)
1997 Magnetic Materials Part 4: Methods of
Measurement of d.c. Magnetic Properties of
Iron and Steel Supersedes BS 6404: Part 4:
1986; (V)
1997 Radiographic Cassettes and
Mammographic Cassettes Used for Medical
X-Ray Diagnosis IEC 60406: 1997;
Supersedes BS 7534: 1991; (N)
1993 Amd 1 High-Voltage Alternating
Current Switch-Fuse Combinations (IEC
420: 1990) (AMD 8059) December 15, 1993
(Read in Conjunction with BS 6581.
Formerly BS 7426: 1991) (E)
1999 Ferrite Cores - Guide on the Limits of
Surface Irregularities - Part 3: ETD-cores and
E-cores Supersedes BS 6786:1986; IEC
60424-3:1999; (E)
1999 Corr 1 Ferrite Cores - Guide on the
Limits of Surface Irregularities - Part 3:
ETD-Cores and E-Cores CORR 10862;
March 2000; IEC 60424-3:1999; (S)
2001 Ferrite Cores - Guide on the Limits of
Surface Irregularities Part 4: Ring Cores (S)
1999 Low-Voltage Switchgear and
Controlgear Assemblies - Part 1: TypeTested and Partially Type-Tested Assemblies
IEC 60439-1: 1999; (E)
1994 Low-Voltage Switchgear and
BS EN 60439-1
BS EN 60439-1
BS EN 60444-1
BS EN 60512-25-1
BS EN 60512-25-3
BS EN 60444-1
BS EN 60444-2
BS EN 60444-3
Controlgear Assemblies Part 1: Specification
for Type-Tested and Partially Type-Tested
Assemblies (IEC 439-1: 1992) (Replaces BS
5486: Part 1: 1990) (E)
1994 Amd 1 Low-Voltage Switchgear and
Controlgear Assemblies Part 1: Specification
for Type-Tested and Partially Type-Tested
Assemblies (IEC 439-1: 1992) (AMD 8524)
March 15, 1995 (Replaces BS 5486: Part 1:
1990) (E)
1994 Amd 2 Low-Voltage Switchgear and
Controlgear Assemblies Part 1: Specification
for Type-Tested and Partially Type-Tested
Assemblies (IEC 439-1: 1992) (AMD 8788)
October 15, 1995 (Replaces BS 5486: Part 1:
1990) (E)
1997 Measurement of Quartz Crystal Unit
Parameters by Zero Phase Technique in a PiNetwork Part 1: Basic Method for the
Measurement of Resonance Frequency and
Resonance Resistance of Quartz Crystal
Units by Zero Phase Technique in a PiNetwork IEC 444-1:
2001 Connectors for Electronic Equipment Tests and Measurements - Part 25-1: Test 25a
- Crosstalk Ratio IEC 60512-25-1:2001; (E)
2001 Connectors for Electronic Equipment Tests and Measurement - Part 25-3: Test 25c
- Rise Time Degradation IEC 60512-253:2001; (E)
1997 Amd 1 Measurement of Quartz Crystal
Unit Parameters by Zero Phase Technique in
a Pi-Network Part 1: Basic Method for the
Measurement of Resonance Frequency and
Resonance Resistance of Quartz Crystal
Units by Zero Phase Technique in a PiNetwork AMD 1
1997 Measurement of Quartz Crystal Unit
Parameters by Zero Phase Technique in a piNetwork Part 2: Phase Offset Method for
Measurement of Motional Capacitance of
Quartz Crystal Units Issue 2, October 1997;
Renumbers BS 7681: Part 2: 1993; IEC 4442: 1980;
1997 Measurement of Quartz Crystal Unit
Parameters by Zero Phase Technique in a pi-
BS EN 60444-5
BS EN 60444-6
BS EN 60445
BS EN 60454-3-12
BS EN 60510-3-4
BS EN 60512-1-100
BS EN 60512-6-5
Network Part 3: Basic Method for the
Measurement of Two-Terminal Parameters of
Quartz Crystal Units up to 200 MHz by
Phase Technique in a pi-Network with
Compensation of th
1997 Measurement of Quartz Crystal Unit
Parameters Part 5: Methods for the
Determination of Equivalent Electrical
Parameters Using Automatic Network
Analyzer Techniques and Error Correction
Issue 2, October 1997; Renumbers BS 7681:
Part 5: 1995; IEC 444-5
1997 Measurement of Quartz Crystal Unit
Parameters Part 6: Measurement of Drive
Level Dependence (DLD) Issue 2, October
1997; Renumbers BS 7681: Part 6: 1995; IEC
444-6: 1995; (S)
2000 Basic and Safety Principles for ManMachine Interface, Marking and
Identification - Identification of Equipment
Terminals and of Terminations of Certain
Designated Conductors, Including General
Rules for an Alphanumeric System
Supersedes BS 5559:1991
1998 Pressure-Sensitive Adhesive Tapes for
Electrical Purposes Part 3: Specifications for
Individual Materials - Sheet 12: Polyethylene
Film Tapes with Pressure-Sensitive Adhesive
IEC 60454-3-12: 1998; (F)
1996 Methods of Measurement for Radio
Equipment Used in Satellite Earth Stations
Part 3: Methods of Measurement on
Combinations of Sub- Systems Section 3.4:
Measurements for Frequency Division
Multiplex (f.d.m.) Transmission (IEC 510-34: 1992) (S)
2001 Connectors for Electronic Equipment Tests and Measurements - Part 1-100:
General - Applicable Publications IEC
60512-1-100:2001; Together with BS EN
60512-1:2001, Supersedes BS EN 605121:1995; (E)
2001 Electromechanical Components for
Electronic Equipment - Basic Testing
Procedures and Measuring Methods Part 6-5:
Dynamic Stress Tests Test 6e: Random
BS EN 60512-10-4
BS EN 60512-11-1
BS EN 60512-25-4
BS EN 60531
BS EN 60570
BS EN 60570
BS EN 60512-11-7
BS EN 60512-11-8
BS EN 60512-11-14
BS EN 60512-12-6
Vibration (E)
1997 Electromechanical Components for
Electronic Equipment - Basic Testing
Procedures and Measuring Methods Part 10:
Impact Tests (Free Components), Static Load
Tests (Fixed Components), Endurance Tests
and Overload Tests Section 4: Test 10d:
Electrical O
1999 Electromechanical Components for
Electronic Equipment - Basic Testing
Procedures and Measuring Methods - Part
11: Climatic Tests - Section 1: Test 11a Climatic Sequence IEC 60512-11-1: 1995;
(E)
2001 Connectors for Electronic Equipment Tests and Measurements - Part 25-4: Test
25d - Propagation Delay IEC 60512-254:2001; (E)
2000 Household Electric Thermal Storage
Room Heaters - Methods for Measuring
Performance IEC 60531:1999; Supersedes
BS 3999:Part 2:1991;(L)
1997 Electrical Supply Track Systems for
Luminaires (F)
1997 Amd 1 Electrical Supply Track Systems
for Luminaires AMD 10101; July 1999;
Supersedes BS EN 60570: 1994; (F)
1997 Electromechanical Components for
Electronic Equipment - Basic Testing
Procedures and Measuring Methods Part 11:
Climatic Tests Section 7: Test 11g. Flowing
Mixed Gas Corrosion Test IEC 512-11-7:
1997; (E)
1999 Electromechanical Components for
Electronic Equipment - Basic Testing
Procedures and Measuring Methods - Part
11: Climatic Tests - Section 8: Test 11h Sand and Dust IEC 60512-11-8: 1995; (E)
1997 Electromechanical Components for
Electronic Equipment - Basic Testing
Procedures and Measuring Methods Part 11:
Climatic Tests Section 14: Test 11p Flowing Single Gas Corrosion Test IEC 51211-14: 1996; (E)
1997 Electromechanical Components for
Electronic Equipment - Basic Testing
BS EN 60512-12-7
BS EN 60512-13-1
BS EN 60512-15-8
BS EN 60512-16-20
BS EN 60512-20-2
BS EN 60512-23-3
BS EN 60512-23-4
BS EN 60517
Procedures and Measuring Methods Part 12:
Soldering Tests Section 6: Test 12f. Sealing
Against Flux and Cleaning Solvents in
Machine Soldering IEC 512-12-6: 1996; (E)
2001 Connectors for Electronic Equipment Tests and Measurements - Part 12-7:
Soldering Tests - Test 12g: Solderability,
Wetting Balance Method IEC 60512-12-7:
2001; (E)
1997 Electromechanical Components for
Electronic Equipment - Basic Testing
Procedures and Measuring Methods Part 13:
Mechanical Operating Tests Section 1: Test
13a - Engaging and Separating Forces IEC
512-13-1: 1996; (E)
1997 Electromechanical Components for
Electronic Equipment - Basic Testing
Procedures and Measuring Methods Part 15:
Mechanical Tests on Contacts and
Terminations Section 8: Test 15h: Contact
Retention System Resistance to Tool
Application IEC 512-15-8: 1
1997 Electromechanical Components for
Electronic Equipment - Basic Testing
Procedures and Measuring Methods Part 16:
Mechanical Tests on Contacts and
Terminations Section 20: Test 16t.
Mechanical Strength (Wired Termination of
Solderless Connections) IEC
2001 Electromechanical Components for
Electronic Equipment - Basic Testing
Procedures and Measuring Methods - Part
20-2: Test 20b - Flammability Tests Fireproofness IEC 60512-20-2:2000; (E)
2001 Electromechanical Components for
Electronic Equipment - Basic Testing
Procedures and Measuring Methods Part 233: Test 23c: Shielding Effectiveness of
Connectors and Accessories IEC 60512-233:2000; (E)
2001 Connectors for Electronic Equipment Tests and Measurements - Part 23-4:
Screening and Filtering Tests - Test 23D:
Transmission Line Reflections in the Time
Domain IEC 60512-23-4:2001; (E)
1997 Amd 1 Gas-Insulated Metal-Enclosed
BS EN 60517
BS EN 60519-4
BS EN 60522
BS EN 60524
BS EN 60524
BS EN 60519-3
BS EN 60519-4
BS EN 60519-9
BS EN 60519-11
BS EN 60534-1
BS EN 60534-3-1
Switchgear for Rated Voltages of 72.5 kV
and Above IEC 517: 1990; Supersedes BS
5524: 1987; AMD 9211 January 15, 1997 (E)
1997 Amd 2 Gas-Insulated Metal-Enclosed
Switchgear for Rated Voltages of 72.5 kV
and Above AMD 13080:June 2001; IEC
60517:1990; Renumbers BS 5524:1992;
Supersedes BS 5524:1987; (E)
1997 Safety in Electroheat Installations Part
4: Particular Requirements for Arc Furnace
Installations (F)
1999 Determination of the Permanent
Filtration of X-Ray Tube Assemblies IEC
60522: 1999; (N)
1993 Direct-Current Resistive Volt Ratio
Boxes Renumbers BS 5765: 1979; (E)
1993 Amd 1 Direct-Current Resistive Volt
Ratio Boxes AMD 7913; October 15, 1993;
IEC 60524: 1975; (E)
1996 Amd 1 Safety in Electroheat
Installations Part 3: Particular Requirements
for Induction and Conduction Heating and
Induction Melting Installations (AMD 9102)
October 15, 1996 (F)
1997 Amd 1 Safety in Electroheat
Installations - Part 4: Particular Requirements
for Arc Furnace Installations AMD 13015:
March 2001; Supersedes BS 7699-4:1994;
IEC 60519-4:1995; (F)
1996 Amd 1 Safety in Electroheat
Installations Part 9: Particular Requirements
for High-Frequency Dielectric Heating
Installations (IEC 519-9: 1987) (AMD 9103)
October 15, 1996 (F)
1997 Safety in Electroheat Installations Part
11: Particular Requirements for Installations
for Electromagnetic Stirring, Transport or
Pouring of Metal Liquids IEC 60519-11:
1997; (F)
1993 Amd 1 Industrial-Process Control
Valves Part 1: Control Valve Terminology
and General Considerations (IEC 534-1:
1987) (AMD 7815) July 15, 1993 (Formerly
BS 5793: Part 1: 1989) (Q)
2000 Amd 1 Industrial-Process Control
Valves - Part 3-1: Dimensions - Face-To-
BS EN 60534-3-2
BS EN 60534-6-2
BS EN 60534-8-2
BS EN 60546-1
BS EN 60546-2
BS EN 60570
BS EN 60570
BS EN 60570-2-1
BS EN 60570-2-1
Face Dimensions for Flanged, Two-Way,
Globe-Type Straight Pattern and Centre-ToFace Dimensions for Flanged, Two-Way,
Globe-Type, Angle Pattern Control Valves
AMD 11086; Septemb
2001 Industrial-Process Control Valves - Part
3-2: Dimensions - Face-to-Face Dimensions
for Rotary Control Valves Except Butterfly
Valves IEC 60534-3-2:2001; (Q)
2001 Industrial-Process Control Valves - Part
6-2: Mounting Details for Attachment of
Positioners to Control Valves - Positioner
Mounting on Rotary Actuators IEC 60534-62:2000; (Q)
1993 Amd 1 Industrial-Process Control
Valves Part 8: Noise Considerations Section
2: Laboratory Measurement of Noise
Generated by Hydrodynamic Flow Through
Control Valves (IEC 534-8-2: 1991) (AMD
7819) July 15, 1993 (Formerly BS 5793:
Section 8.2: 1991) (
1993 Amd 2 Controllers with Analogue
Signals for Use in Industrial- Process Control
Systems Part 1: Methods of Evaluating the
Performance (IEC 546-1: 1987) (AMD 7861)
July 15, 1993 (Formerly BS 5558: Part 1:
1989. Replaces BS 5558: 1978) (Q)
1993 Amd 2 Controllers with Analogue
Signals for Use in Industrial-Process Control
Systems Part 2: Guidance for Inspection and
Routine Testing (IEC 546-2: 1987) (AMD
7862) July 15, 1993 (Formerly BS 5558: Part
2: 1989. Replaces BS 5558: 1978) (Q)
1997 Amd 2 Electrical Supply Track Systems
for Luminaires AMD 13094:May 2001; (F)
1997 Corr 1 Electrical Supply Track Systems
for Luminaires CORR 10564; February 2000;
(F)
1995 Electrical Supply Track Systems for
Luminaires Part 2: Mixed Supply Systems
Section 1: Classes I and III (IEC 570-2-1:
1994) (F)
1995 AMD 1 Electrical Supply Track
Systems for Luminaires Part 2: Mixed
Supply Systems Section 1: Classes I and III
IEC 570-2-1: 1994; AMD 9384 February 15,
BS EN 60584-1
BS EN 60618
BS EN 60598-2-2
BS EN 60598-2-20
BS EN 60574-21
BS EN 60598-2-2
BS EN 60598-2-24
BS EN 60599
BS EN 60601-1
BS EN 60601-2-3
BS EN 60601-2-3
1997; (F)
1996 Thermocouples Part 1: Reference
Tables (IEC 584-1: 1995) (G)
1999 Inductive Voltage Dividers Renumbers
BS 5862: 1980; (S)
1997 Luminaires Part 2: Particular
Requirements Section 2.2 Recessed
Luminaires IEC 598-2-2: 1996; (F)
1998 Amd 1 Luminaires Part 2: Particular
Requirements Section 2.20: Lighting Chains
AMD 10117; November 15, 1998 (F)
1994 Audiovisual, Video and Television
Equipment and Systems Part 21: Video Tape
Leader and Trailer for Education and
Training Applications (IEC 574-21: 1992)
(Also Numbered BS 5817: Part 21: 1994) (S)
1997 Amd 1 Luminaires Part 2: Particular
Requirements Section 2.2: Recessed
Luminaires AMD 9630; November 15, 1997;
Read in Conjunction with BS EN 60598-1:
1993; IEC 598-2-2: 1996; (F)
1999 Luminaires - Part 2: Particular
Requirements - Section 24: Luminaires with
Limited Surface Temperatures IEC 60598-224: 1997, Modified; (F)
1999 Mineral Oil-Impregnated Electrical
Equipment in Service - Guide to the
Interpretation of Dissolved and Free Gases
Analysis Supersedes BS 5800: 1979; IEC
60599: 1999; (E)
1990 Medical Electrical Equipment Part 1:
General Requirements for Safety Issue 2,
October 1997; Renumbers BS 5724: Part 1:
1989; (N)
1993 Medical Electrical Equipment Part 2:
Particular Requirements for the Safety of
Short-Wave Therapy Equipment IEC 606012-3: 1991; Renumbers BS 5724: Section 2.3:
1992; Supersedes BS 5724: Section 2.3:
1983; (N)
1993 Amd 1 Medical Electrical Equipment
Part 2: Particular Requirements for Safety
Section 2.3: Specification for Short-Wave
Therapy Equipment AMD 7879; August 15,
1993; Renumbers BS 5724: Section 2.3:
1992; IEC 60601-2-3: 1991; (N)
BS EN 60601-2-5
BS EN 60601-2-8
BS EN 60601-2-9
BS EN 60601-2-10
BS EN 60601-2-17/A1
BS EN 60601-2-18
BS EN 60133
BS EN 60137
BS EN 60139
BS EN 60601-2-19
2001 Medical Electrical Equipment - Part 25: Particular Requirements for the Safety of
Ultrasonic Physiotherapy Equipment
Supersedes BS 5724-2-5: 1985; (N)
1998 Medical Electrical Equipment - Part 2:
Particular Requirements for Safety Section
2.8 Specification for Therapeutic X-Ray
Equipment Operating in the Range 10 kV to
1 MV Also Numbered as BS 5724-2.8: 1998;
Supersedes BS 5724: Section 2.8: 1987;
Incorp
1997 Medical Electrical Equipment Part 2:
Particular Requirements for Safety Section
2.9: Specification for Patient Contact
Dosemeters Used in Radiotherapy with
Electrically Connected Radiation Detectors
IEC 601-2-9: 1996; (N); Also Known as BS
5724: Sect
2001 Medical Electrical Equipment - Part
2.10: Particular Requirements for the Safety
of Nerve and Muscle Stimulators Renumbers
BS 5724-2.10:1988; (N)
1996 Medical Electrical Equipment Part 2:
Particular Requirements for Safety Section
2.17 Specification for Remote-Controlled
Automatically-Driven Gamma-Ray
Afterloading Equipment Supplement 1:
Revised and Additional Text IEC 601-2-17:
Amendment 1: 1996 (
1997 Medical Electrical Equipment Part 2:
Particular Requirements for Safety Section
2.18 Specification for Endoscopic Equipment
Also Known as BS 5724: Section 2.18: 1997;
IEC 601-2-18: 1996; Supersedes BS 4824:
1972(N)
2001 Dimensions of Pot-Cores Made of
Magnetic Oxides and Associated Parts
Supersedes BS 4061-1:1987(1997); (E)
1996 Insulating Bushings for Alternating
Voltages Above 1 kV (IEC 137: 1995) (E)
2001 Preparation of Outline Drawings for
Cathode-Ray Tubes, Their Components,
Connections and Gauges IEC 60139:2000;
(G)
1997 Medical Electrical Equipment Part 2:
Particular Requirements for Safety -
BS EN 60601-2-20
BS EN 60601-2-22
BS EN 60601-2-22
BS EN 60601-2-25
BS EN 60601-2-25
BS EN 60601-2-29/A1
BS EN 60601-2-35
BS EN 60601-2-36
Specification for Baby Incubators IEC 601-219: 1990, Including IEC Amendment 1:
1996; (N); Also Known as BS 5724: Section
2.119: 1997
1997 Medical Electrical Equipment Part 2:
Particular Requirements for Safety Specification for Transport Incubators IEC
601-2-20: 1990, Including IEC Amendment
1: 1996; (N); Also Known as BS 5724:
Section 2.120: 1997
1996 Medical Electrical Equipment Part 2:
Particular Requirements for Safety Section 2.
122: Specification for Diagnostic and
Therapeutic Laser Equipment (IEC 601-2-22:
1995) (N)
1993 Medical Electrical Equipment Part 2:
Particular Requirements for Safety Section
2.122: Specification for Diagnostic and
Therapeutic Laser Equipment (IEC 601-2-22:
1992) Read in Conjunction with BS 5724:
Part 1. Also Numbered BS 5724: Section
2.122: 1
1996 Amd 1 Medical Electrical Equipment Part 2-25: Particular Requirements for the
Safety of Electrocardiographs AMD 9112:
July, 1996; AMD 10844: October, 2000; IEC
60601-2-25: 1993; (N)
1996 Amd 1 Medical Electrical Equipment
Part 2: Particular Requirements for Safety
Section 2.25: Specification for
Electrocardiographs (IEC 601-2-25: 1993)
(AMD 9112) July 15, 1996 (N)
1997 Medical Electrical Equipment Part 2:
Particular Requirements for Safety Section
2.29: Specification for Radiotherapy
Simulators Supplement 1: Revised and
Additional Text IEC 601-2-29: Amendment
1: 1996; (N); Also Known as BS 5724:
Section 2.129: Supp
1997 Medical Electrical Equipment Part 2:
Particular Requirements for Safety Section
2.35: Specification for Blankets, Pads and
Mattresses Intended for Heating in Medical
Use Also Known as BS 5724: Section 2.35:
1997; IEC 601-2-35: 1996; (N)
1997 Medical Electrical Equipment Part 2:
BS EN 60601-2-39
BS EN 60601-2-39
BS EN 60601-2-41
BS EN 60601-2-44
BS EN 60143
BS EN 60154-1
BS EN 60154-2
BS EN 60155
BS EN 60143-1
BS EN 60146-2
BS EN 60155
Particular Requirements for Safety Specification for Equipment for ExtraCorporeally Induced Lithotripsy IEC 606012-36: 1997; (N)
1999 Corr 1 Medical Electrical Equipment Part 2-39: Particular Requirements for Safety
- Specification for Peritoneal Dialysis
Equipment CORR 1 10990: June 2001;
Supersedes BS EN 50072: 1992; IEC 606012-39: 1999; Also Known as BS 5724-2.39:
1999; (N)
1999 Medical Electrical Equipment - Part 239: Particular Requirements for Safety Specification for Peritoneal Dialysis
Equipment IEC 60601-2-39: 1999; (N)
2000 Medical Electrical Equipment - Part 241: Particular Requirements for the Safety of
Surgical Luminaires and Luminaires FOR
Diagnosis IEC 60601-2-41:2000; (N)
1999 Medical Electrical Equipment - Part 244: Particular Requirements for the Safety of
X-Ray Equipment for Computed
Tomography Also Numbered as BS 57242.44: 1999; IEC 60601-2-44: 1999; (N)
1993 Series Capacitors for Power Systems
(Renumbered as BS EN 60143-1: 1993) (E)
1996 Flanges for Waveguides Part 1: General
Requirements (IEC 154-1: 1982) (S)
1997 Flanges for Waveguides Part 2:
Relevant Specifications for Flanges for
Ordinary Rectangular Waveguides
Renumbers BS 6569: Part 2: 1985; (S)
1995 Glow-Starters for Fluorescent Lamps
(IEC 155: 1993) (Replaces BS 3772: 1990)
(E)
1993 Amd 1 Series Capacitors for Power
Systems Part 1: General - Performance,
Testing and Rating - Safety Requirements Guide for Installation (AMD 8725) August
15, 1995 (Formerly BS EN 60143: 1993) (E)
2000 Corr 1 Semiconductors Convertors Part 2: Self-Commutated Semiconductor
Converters Including Direct D.C. Converters
CORR 11067: September 2000; IEC 601462: 1999; (S)
1995 Amd 1 Glow-Starters for Fluorescent
BS EN 60169-25
BS EN 60182 -2
BS EN 60188
BS EN 60191-3
BS EN 60191-4
BS EN 60191-6-3
BS EN 60191-6-5
BS EN 60191-6-6
Lamps (IEC 155: 1993) (AMD 9126)
September 15, 1996 (E)
1994 Radio-Frequency Connectors Part 25:
Two-Pole Screw (3/4-20 UNEF) Coupled
Connectors for Use with Shielded Balanced
Cables Having Twin Inner Conductors with
Inner Diameter of Outer Conductor 13,56
mm (0,534 in) (Type TWHN) (IEC 169-25:
1992) (S)
1991 Basic Dimensions of Winding Wires
Part 2: Specification for Maximum Overall
Diameters of Enamelled Round Winding
Wires (Replaces BS 6811: Part 1: Section
1.2: 1987)
2001 High-Pressure Mercury Vapour Lamps
- Performance Specifications IEC
60188:2001; Together with BS EN
62035:2000 Supersedes BS 3677:1989; (E)
2000 Mechanical Standardization of
Semiconductor Devices - Part 3: General
Rules for the Preparation of Outline
Drawings of Integrated Circuits IEC 601913:1999; Supersedes BS 3934-3:1992; (G)
2000 Mechanical Standardization of
Semiconductor Devices - Part 4: Coding
System and Classification into Forms of
Package Outlines for Semiconductor Device
Packages IEC 60191-4:1999; Supersedes BS
3934-4:1992; (G)
2001 Mechanical Standardization of
Semiconductor Devices - Part 6-3: General
Rules for the Preparation of Outline
Drawings of Surface Mounted
Semiconductor Device Packages - Measuring
Methods for Package Dimensions of Quad
Flat Packs (QFP) IEC 60191-6-3:2
2001 Mechanical Standardization of
Semiconductor Devices - Part 6-5: General
Rules for the Preparation of Outline
Drawings of Surface Mounted
Semiconductor Device Packages - Design
Guide for Fine-Pitch Ball Grid Array
(FBGA) IEC 60191-6-5:2001; (G)
2001 Mechanical Standardization of
Semiconductor Devices - Part 6-6: General
Rules for the Preparation of Outline
BS EN 60191-6-8
BS EN 60205
BS EN 60215
BS EN 60239
BS EN 60477
BS EN 60580
BS EN 60244-1
BS EN 60216-1
BS EN 60216-4-3
BS EN 60243-2
BS EN 60244-5
Drawings of Surface Mounted
Semiconductor Device Packages - Design
Guide for Fine Pitch Land Grid Array
(FLGA) IEC 60191-6-6:2001; (G)
2001 Mechanical Standardization of
Semiconductor Devices - Part 6-8: General
Rules for the Preparation of Outline
Drawings of Surface Mounted
Semiconductor Device Packages - Design
Guide for Glass Sealed Ceramic Quad
Flatpack (G-QFP) IEC 60191-6-8:2001; (
2001 Calculation of the Effective Parameters
of Magnetic Piece Parts Supersedes BS
6454:1983; (H)
1996 Amd 1 Safety Requirements for Radio
Transmitting Equipment (AMD 9197) June
15, 1996 (S)
1997 Nominal Dimensions of Cylindrical
Machined Graphite Electrodes with Threaded
Sockets and Nipples for Use in Electric Arc
Furnaces IEC 60239: 1997; (F)
1999 Laboratory d.c. Resistors Renumbers
BS 5457: 1977; (H)
2000 Dose Area Product Meters IEC
60580:2000; (N)
2000 Methods of Measurement for Radio
Transmitters - Part 1: General Characteristics
for Broadcast Transmitters IEC 60244-1:
1999; (S)
2002 Electrical Insulating Materials Properties of THermal Endurance - Part 1:
Ageing Procedures and Evaluation of Test
Results IEC 60216-1:2001; Supersedes BS
5691-1:1995; (E)
Electrical Insulating Materials - Thermal
Endurance Properties - Part 4-3: Ageing
Ovens - Multi-chamber Ovens This Standard
is Identical with IEC 60216-4-3:2000; (E)
2001 Electric Strength of Insulating Materials
- Test Methods - Part 2: Additional
Requirements for Tests Using Direct Voltage
Supersedes BS 2918-2:1994; IEC 602432:2001; (F)
1995 Methods of Measurement for Radio
Transmitters Part 5: Performance
Characteristics of Television Transmitters
BS EN 60244-9
BS EN 60244-10
BS EN 60244-12-1
BS EN 60244-12-2
BS EN 60244-13
BS EN 60244-14
BS EN 60244-15
BS EN 60249-1
BS EN 60249-2-1
(IEC 244-5: 1992) (S)
1995 Methods of Measurement for Radio
Transmitters Part 9: Performance
Characteristics for Television Transposers
(IEC 244-9: 1993) (S)
1993 Methods of Measurement for Radio
Transmitters Part 10: Methods of
Measurement for Television Transmitters and
Transposers Employing Insertion Test
Signals (IEC 244-10: 1986) (S)
1994 Methods of Measurement for Radio
Transmitters Part 12: Guideline for Drawing
up Descriptive Leaflets for Transmitters and
Transposers for Sound and Television
Broadcasting Section 12.1: Characteristics to
Be Specified (IEC 244-12-1: 1989) (Read in
Co
1994 Methods of Measurement for Radio
Transmitters Part 12: Guideline for Drawing
up Descriptive Leaflets for Transmitters and
Transposers for Sound and Television
Broadcasting Sec. 12.2: Spec. Sheets (IEC
244-12-2: 1989) (Used in Conjunction with
BS EN 6
1993 Methods of Measurement for Radio
Transmitters Part 13: Performance
Characteristics for FM Sound Broadcasting
(IEC 244-13: 1991) (Read in Conjunction
with Parts 1 and 12-1 and 12-2) (S)
1997 Methods of Measurement for Radio
Transmitters Part 14: External
Intermodulation Products Caused by Two or
More Transmitters Using the Same or
Adjacent Antennas IEC 60244-14: 1997; (S)
2000 Methods of Measurement for Radio
Transmitters - Part 15: Amplitude-Modulated
Transmitters for Sound Broadcasting IEC
60244-15: 1999; (S)
1993 Base Materials for Printed Circuits Part
1: Test Methods (IEC 249-1: 1982)
(Formerly BS 4584: Part 1: 1983) (S)
1994 Metal-Clad Base Materials for Printed
Circuits Part 2: Specifications Spec. No.1:
Phenolic Cellulose Paper Copper-Clad
Laminated Sheet, High Electrical Quality
IEC 249-2-1: 1985; Formerly BSS 4584:
BS EN 60249-2-1
BS EN 60254-1
BS EN 60255-1-00
BS EN 60255-24
BS EN 60255-25
BS EN 60249-2-1
BS EN 60249-2-2
BS EN 60249-2-2
BS EN 60249-2-2
Section 102.1: 1990: Replaces BS 4584: Part
7; (S)
1994 Amd 1 Base Materials for Printed
Circuits Part 2: Specifications Specification
No.1: Phenolic Cellulose Paper Copper-Clad
Laminated Sheet, High Electrical Quality
AMD 9517; July, 1997; IEC 249-2-1: 1985;
(S)
1997 Lead-Acid Traction Batteries Part 1:
General Requirements and Methods of Test
IEC 60254-1: 1997; Supersedes BS 2550:
1983; (E)
1997 All-Or-Nothing Electrical Relays
Superseded by BS EN 61810-1: 1999; IEC
255-1-00: 1975; Renumbered BS 5992: Part
2: 1980; (E)
2001 Electrical Relays - Part 24: Common
Format for Transient Data Exchange
(COMTRADE) for Power Systems IEC
60255-24: 2001; (E)
2000 Electrical Relays - Part 25:
Electromagnetic Emission Tests for
Measuring Relays and Protection Equipment
IEC 60255-25: 2000; (E)
1994 Amd 2 Base Materials for Printed
Circuits - Part 2: Specifications Specification No.1: Phenolic Cellulose Paper
Copper-Clad Laminated Sheet, High
Electrical Quality AMD 11047: April 2001;
Renumbers BS 4584-102.1:1990; IEC 249-21:1985; (S)
1994 Base Materials for Printed Circuits Part
2: Specifications Specification No.2:
Phenolic Cellulose Paper Copper-Clad
Laminated Sheet, Economic Quality
Renumbers BS 4584: Section 102.2: 1990;
(S)
1994 Amd 1 Base Materials for Printed
Circuits Part 2: Specifications Specification
No.2: Phenolic Cellulose Paper Copper-Clad
Laminated Sheet, Economic Quality AMD
9518; July 1997; Renumbers BS 4584:
Section 102.2: 1990; IEC 249-2-2: 1985; (S)
1994 Amd 2 Base Materials for Printed
Circuits - Part 2: Specifications Specification No. 2: Phenolic Cellulose Paper
BS EN 60249-2-3
BS EN 60249-2-3
BS EN 60249-2-3
BS EN 60249-2-4
BS EN 60249-2-4
BS EN 60249-2-4
BS EN 60249-2-8
Copper-Clad Laminated Sheet, Economic
Quality AMD 11043: April 2001; IEC 249-22:1985; Renumbers Bs 4584-102.2:1990; (S)
1994 Base Materials for Printed Circuits Part
2: Specifications Specification No.3: Epoxide
Cellulose Paper Copper-Clad Laminated
Sheet of Defined Flammability (Vertical
Burning Test) IEC 249-2-3: 1987; Formerly
BS 4584: Section 102.3: 1990; (S)
1994 Amd 1 Base Materials for Printed
Circuits Part 2: Specifications Specification
No.3: Epoxide Cellulose Paper Copper-Clad
Laminated Sheet of Defined Flammability
(Vertical Burning Test) AMD 9520; July
1997; IEC 249-2-3: 1987; (S)
1994 Amd 2 Base Materials for Printed
Circuits - Part 2: Specifications Specification No.3: Epoxide Cellulose Paper
Copper-Clad Laminated Sheet of Defined
Flammability (Vertical Burning Test) AMD
11049; April 2001; Renumbers BS 4584102.3:1990; IEC 2491994 Base Materials for Printed Circuits Part
2: Specifications Specification No.4: Epoxide
Woven Glass Fabric Copper-Clad Laminated
Sheet, General Purpose Grade Formerly BS
4584: Section 102.4: 1990; Replaces BS
4584: Part 2: 1972; IEC 249-2-4: 1987; Rep
1994 Amd 1 Base Materials for Printed
Circuits Part 2: Specifications Specification
No.4: Epoxide Woven Glass Fabric CopperClad Laminated Sheet, General Purpose
Grade AMD 9519; July 1997; IEC 249-2-4:
1987; (S)
1994 Amd 2 Base Materials for Printed
Circuits - Part 2: Specifications Specification No.4: Epoxide Woven Glass
Fabric Copper-Clad Laminated Sheet,
General Purpose Grade AMD 11045; April
2001; Renumbers BS 4584-102.4:1990; IEC
249-2-4: 1987; (S)
1994 Amd 1 Base Materials for Printed
Circuits Part 2: Specifications Specification
No.8: Flexible Copper-Clad Polyester
(PETP) Film (IEC 249-2-8: 1987) (AMD
8417) February 15, 1995 (Formerly BS 4584:
BS EN 60249-2-9
BS EN 60264-1
BS EN 60268-5
BS EN 60268-7
BS EN 60249-2-9
BS EN 60249-2-9
BS EN 60249-2-10
BS EN 60249-2-10
BS EN 60249-2-10
Part 102: Section 102.8: 1990) (Replaces BS
4584: Part
1994 Base Materials for Printed Circuits Part
2: Specifications Specification No. 9:
Expoxide Cellulose Paper Core, Expoxide
Glass Cloth Surfaces Copper-Clad Laminated
Sheet of Defined Flammability (Vertical
Burning Test) IEC 249-2-10: 1987; (S)
1996 Amd 1 Packaging of Winding Wires
Part 1: Containers for Round Winding Wires
(IEC 264-1: 1968) (AMD 9047) May 15,
1996 (E)
1997 Sound System Equipment Part 5:
Loudspeakers IEC 268-5: 1989; Renumbers
BS 6840: Part 5: 1995; (S)
1996 Sound System Equipment Part 7:
Headphones and Earphones (IEC 268-7:
1996) (S)
1994 Amd 1 Base Materials for Printed
Circuits Part 2: Specifications Specification
No. 9: Epoxide Cellulose Paper Core,
Epoxide Glass Cloth Surfaces Copper-Clad
Laminated Sheet of Defined Flammability
(Vertical Burning Test) AMD 9528; July
1997; IEC 2491994 Amd 2 Base Materials for Printed
Circuits - Part 2: Specifications Specification No.9: Epoxide Cellulose Paper
Core, Epoxide Glass Cloth Surfaces CopperClad Laminated Sheet of Defined
Flammability (Vertical Burning Test) AMD
13069:July 2001; IEC 6
1994 Amd 2 Base Materials for Printed
Circuits - Part 2: Specifications Specification No. 10: Epoxide NonWoven/Woven Glass Reinforced CopperClad Laminated Sheet of Defined
Flammability (Vertical Burning Test) AMD
13076: June 2001; Renumbers BS 4584-10
1994 Base Materials for Printed Circuits Part
2: Specifications Specification No. 10
Expoxide Non-Woven/Woven Glass
Reinforced Copper- Clad Laminated Sheet of
Defined Flammability (Vertical Burning
Test) IEC 249-2-10: 1987; (S)
1994 Amd 1 Base Materials for Printed
BS EN 60249-2-11
BS EN 60249-2-11
BS EN 60249-2-11
BS EN 60249-2-12
BS EN 60249-2-12
BS EN 60249-2-12
Circuits Part 2: Specifications Specification
No. 10: Epoxide Non-Woven/Woven Glass
Reinforced Copper-Clad Laminated Sheet of
Defined Flammability (Vertical Burning
Test) AMD 9529; July 1997; IEC 249-2-10:
1987; (S)
1994 Amd 2 Base Materials for Printed
Circuits - Part 2: Specifications Specification No. 11: Thin Epoxide Woven
Glass Fabric Copper-Clad Laminated Sheet,
General Purpose Grade, for Use in the
Fabrication of Multilayer Printed Boards
AMD 13075: June 200
1994 Base Materials for Printed Circuits Part
2: Specifications Specification No. 11: Thin
Epoxide Woven Glass Fabric Copper-Clad
Laminated Sheet, General Purpose Grade, for
Use in the Fabrication of Multilayer Printed
Boards IEC 249-2-11: 1987; (S)
1994 Amd 1 Base Materials for Printed
Circuits Part 2: Specifications Specification
No. 11: Thin Epoxide Woven Glass Fabric
Copper-Clad Laminated Sheet, General
Purpose Grade, for Use in the Fabrication of
Multilayer Printed Boards AMD 9530;
August 1997;
1994 Base Materials for Printed Circuits Part
2: Specifications Specification No. 12: Thin
Expoxide Woven Glass Fabric Copper-Clad
Laminated Sheet of Defined Flammability,
for Use in the Fabrication of Multilayer
Printed Boards IEC 249-2-12: 1987; (S)
1994 Amd 1 Base Materials for Printed
Circuits Part 2: Specifications Specification
No. 12: Thin Epoxide Woven Glass Fabric
Copper-Clad Laminated Sheet of Defined
Flammability, for Use in the Fabrication of
Multilayer Printed Boards AMD 9531;
August 1997;
1994 Amd 2 Base Materials for Printed
Circuits - Part 2-12: Specifications Specification No. 12: Thin Epoxide Woven
Glass Fabric Copper-Clad Laminated Sheet
of Defined Flammability, for Use in the
Fabrication of Multilayer Printed Boards
AMD 13074:July
BS EN 60269-1
BS EN 60269-1
BS EN 60286-5
BS EN 60289
BS EN 60249-2-13
BS EN 60249-2-14
BS EN 60249-2-14
BS EN 60249-2-14
BS EN 60249-2-15
BS EN 60249-2-16
1999 Low-Voltage Fuses - Part 1: General
Requirements IEC 60269-1: 1998; (E)
1999 Corr 1 Low-Voltage Fuses - Part 1:
General Requirements CORR 13161: August
31, 2001; IEC 60269-1: 1998; (E)
1997 Packaging of Components for
Automatic Handling Part 5: Matrix Trays (H)
1995 Amd 1 Reactors (AMD 8405) January
15, 1995 (Formerly BS 4944: 1994 Replaces
BS 4944: 1973) (E)
1994 Amd 1 Base Materials for Printed
Circuits Part 2: Specifications Specification
No. 13: Flexible Copper-Clad Polyimide
Film, General Purpose Grade (AMD 8421)
December 15, 1994 (IEC 249-2-13:1987) (S)
1994 Base Materials for Printed Circuits Part
2: Specifications Spec. No. 14: Phenolic
Cellulose Paper Copper- Clad Laminated
Sheet of Defined Flammability (Vertical
Burning Test), Economic Quality IEC 249-214:1988; (S)
1994 Amd 1 Base Materials for Printed
Circuits Part 2: Specifications Specification
No. 14: Phenolic Cellulose Paper CopperClad Laminated Sheet of Defined
Flammability (Vertical Burning Test),
Economic Quality AMD 9532; August 1997;
Renumbers BS 4584: Se
1994 Amd 2 Base Materials for Printed
Circuits - Part 2: Specifications Specification No. 14: Phenolic Cellulose
Paper Copper-Clad Laminated Sheet of
Defined Flammability (Vertical Burning
Test), Economic Quality AMD
13073:September 2001; Renumbers BS 4
1994 Amd 1 Base Materials for Printed
Circuits Part 2: Specifications Specification
No. 15: Flexibile Copper-Clad Polyimide
Film, of Defined Flammability (IEC 249-215: 1987) (AMD 8428) December 15, 1994
(S)
1993 Amd 3 Base Materials for Printed
Circuits - Part 2: Specifications Specification No. 16: Polyimide Woven
Glass Fabric Copper-Clad Laminated Sheet
of Defined Flammability (Vertical Burning
BS EN 60249-2-16
BS EN 60249-2-16
BS EN 60249-2-16
BS EN 60249-2-18
BS EN 60249-2-18
BS EN 60249-2-18
BS EN 50288-1
Test) AMD 13072: June 2001; Renumbers
BS 4584: Sec 102.16: 1
1993 Base Materials for Printed Circuits Part
2: Specifications Specification No. 16:
Polymide Woven Glass Fabric Copper-Clad
Laminated Sheet of Defined Flammability
(Vertical Burning Test) Formerly BS 4584:
Section 102.16: 1992; IEC 249-2-16: 1992;
(S)
1993 Amd 1 Base Materials for Printed
Circuits Part 2: Specifications Spec. No. 16:
Polyimide Woven Glass Fabric Copper-Clad
Laminated Sheet of Defined Flammability
(Vertical Burning Test) (AMD 8426)
December 15, 1994 (IEC 249-2-16: 1992) (S)
1993 Amd 2 Base Materials for Printed
Circuits Part 2: Specifications Specification
No. 16: Polyimide Woven Glass Fabric
Copper-Clad Laminated Sheet of Defined
Flammability (Vertical Burning Test) AMD
9533; August 1997; Renumbers BS 4584:
Section 102.16:
1993 Base Materials for Printed Circuits Part
2: Specifications Specification No. 18:
Bismaleimide/Triazine Modified Epoxide
Woven Glass Fabric Copper-Clad Laminated
Sheet of Defined Flammability (Vertical
Burning Test) (IEC 249-2-18: 1992) (AMD
8017) Nov
1993 Amd 1 Base Materials for Printed
Circuits Part 2: Specifications Specification
No. 18: Bismaleimide/Triazine Modified
Epoxide Woven Glass Fabric Copper-Clad
Laminated Sheet of Defined Flammability
(Vertical Burning Test) (IEC 249-2-18: 1992)
(AMD 843
1993 Amd 2 Base Materials for Printed
Circuits Part 2: Specifications Specification
No. 18: Bismaleimide/Triazine Modified
Epoxide Woven Glass Fabric Copper-Clad
Laminated Sheet of Defined Flammability
(Vertical Burning Test) AMD 9535; August
1997; Renumb
2001 Multi-Element Metallic Cables Used in
Analogue and Digital Communication and
Control - Part 1: Generic Specification (S)
BS EN 50289-1-1
BS EN 60249-2-18
BS EN 60249-2-19
BS EN 60249-2-19
BS EN 60249-2-19
BS EN 60254-2
BS EN 60255-5
BS EN 60255-21-1
BS EN 60255-21-2
2001 Communication Cables - Specifications
for Test Methods - Part 1-1: Electrical Test
Methods - General Requirements (S)
1993 Amd 3 Base Materials for Printed
Circuits - Part 2: Specifications Specification No. 18: Bismaleimide/Triazine
Modified Epoxide Woven Glass Fabric
Copper-Clad Laminated Sheet of Defined
Flammability (Vertical Burning Test) AMD
13070: June 2001; Ren
1993 Base Materials for Printed Circuits Part
2: Specifications Specification No. 19: Thin
Bismaleimide/Triazine Modified Epoxide
Woven Glass Fabric Copper-Clad Laminated
Sheet of Defined Flammability for Use in the
Fabrication of Multilayer Printed Board
1993 Amd 1 Base Materials for Printed
Circuits Part 2: Specifications Specification
No. 19: Thin Bismaleimide/ Triazine
Modified Epoxide Woven Glass Fabric
Copper-Clad Laminated Sheet of Defined
Flammability for Use in the Fabrication of
Multilayer Printe
1993 Amd 2 Base Materials for Printed
Circuits Part 2: Specifications Specification
No. 19: Thin Bismaleimide/ Triazine
Modified Epoxide Woven Glass Fabric
Copper-Clad Laminated Sheet of Defined
Flammability for Use in the Fabrication of
Multilayer Printe
1997 Lead-Acid Traction Batteries Part 2:
Dimensions of Cells and Terminals and
Marking of Polarity on Cells IEC 60254-2:
1997; Supersedes BS 2550: 1983; (E)
2001 Electrical Relays Part 5: Insulation
Coordination for Measuring Relays and
Protection Equipment - Requirements and
Tests Supersedes BS 5992-3:1980; IEC
60255-5:2000; (E)
1996 Amd 1 Electrical Relays Part 21:
Vibration, Shock, Bump and Seismic Tests
on Measuring Relays and Protection
Equipment Section 1: Vibration Tests
(Sinusoidal) (IEC 225-21-1: 1988) (AMD
9095) September 15, 1996 (E)
1996 Amd 1 Electrical Relays Part 21:
BS EN 60255-21-3
BS EN 60255-22-3
BS EN 60255-22-6
BS EN 60264-2-1
BS EN 60264-2-2
BS EN 60264-3-1
BS EN 60264-5-1
BS EN 60268-3
BS EN 60264-2-3
Vibration, Shock, Bump and Seismic Tests
on Measuring Relays and Protection
Equipment Section 2: Shock and Bump Tests
(IEC 255-21-2: 1988) (AMD 9099)
September 15, 1996 (E)
1995 Amd 1 Electrical Relays Part 21:
Vibration, Shock, Bump and Seismic Tests
on Measuring Relays and Protection
Equipment Section 3: Seismic Tests (AMD
8833) October 15, 1995 (Read in
Conjunction with BS 142: Part 0) Formerly
BS 142: Part 1: Subsection
2001 Electrical Relays - Part 22-3: Electrical
Disturbance Tests for Measuring Relays and
Protection Equipment - Radiated
Electromagnetic Field Disturbance Tests IEC
60255-22-3: 2000; (E)
2001 Electrical Relays - Part 22-6: Electrical
Disturbance Tests for Measuring Relays and
Protection Equipment - Immunity to
Conducted Disturbances Induced by Radio
Frequency Fields (E)
1996 Amd 1 Packaging of Winding Wires
Part 2: Cylindrical Barrelled Delivery Spools
Section 2.1: Basic Dimensions (IEC 264-2-1:
1989) (AMD 9048) May 15, 1996 (E)
1996 Packaging of Winding Wires Part 2:
Cylindrical Barrelled Delivery Spools
Section 2.2: Specification for Returnable
Spools Made from Thermoplastic Material
(IEC 264-2-2: 1990) (AMD 9049) May 15,
1996 (E)
2000 Packaging of Winding Wires - Part 3-1:
Taper Barrelled Delivery Spools - Basic
Dimensions IEC 60264-3-1:1999; (E)
1997 Packaging of Winding Wirest 5.1:
Cylindrical Barrelled Delivery Spools with
Conical Flanges - Basic Dimensions IEC
60264-5-1: 1997; (E)
2001 Sound System Equipment - Part 3:
Amplifiers IEC 60268-3:2000; Supersedes
BS 6840-3:1992; (S)
1996 Amd 1 Packaging of Winding Wires
Part 2: Cylindrical Barrelled Delivery Spools
Section 2.3: Specification for NonReturnable Spools Made from Thermoplastic
BS EN 60264-3-1
BS EN 60264-3-3
BS EN 60264-4-1
BS EN 60264-4-2
BS EN 60264-5-2
BS EN 60297- 4
BS EN 60297-5-100
BS EN 60297-5-101
Material (IEC 264-2-3: 1990) (AMD 9050)
May 15, 1996 (E)
1996 Amd 1 Packaging of Winding Wires
Part 3: Taper Barrelled Delivery Spools
Section 3.1: Basic Dimensions (IEC 264-3-1:
1989) (AMD 9061) May 15, 1996 (E)
1996 Amd 1 Packaging of Winding Wires
Part 3: Taper Barrelled Delivery Spools
Section 3.3: Specification for NonReturnable Spools Made from Thermoplastic
Material (IEC 264-3-3: 1990) (AMD 9051)
May 15, 1996 (E)
1996 Amd 1 Packaging of Winding Wires
Part 4: Methods of Test Section 4.1: Delivery
Spools Made from Thermoplastic Material
(IEC 264-4-1: 1989) (Amd 9065) May 15,
1996 (E)
1995 Amd 1 Packaging of Winding Wires
Part 4: Methods of Test Section 2: Containers
Made from Thermoplastic Material for Taper
Barrelled Delivery Spools (IEC 264-4-2:
1992) (AMD 8590) March 15, 1995
(Formerly BS 7584: Part 4: Section 4.2:
1992) (E)
2001 Packaging of Winding Wires - Part 5-2:
Cylindrical Barrelled Delivery Spools with
Conical Flanges - Specification for
Returnable Spools Made from Thermoplastic
Material IEC 60264-5-2: 2001; (E)
1995 Mechanical Structures for Electronic
Equipment - Dimensions of Mechanical
Structures of the 482.6 mm (19 in) Series
Part 4: Subracks and Associated Plug-In
Units - Additional Dimensions (IEC 297-4:
1995) (S)
2001 Mechanical Structures for Electronic
Equipment - Dimensions of Mechanical
Structures of the 482,6 mm (19 in) Series
Part 5-100: Subracks and Associated Plug-In
Units - Design Overview IEC 60297-5100:2001; (S)
2001 Mechanical Structures for Electronic
Equipment - Dimensions of Mechanical
Structures of the 482,6 mm (19 in) Series Part 5-101: Subracks and Associated Plug-In
Units - Injector/Extractor Handle IEC 60297-
BS EN 60297-5-102
BS EN 60297-5-103
BS EN 60297-5-104
BS EN 60297-5-105
BS EN 60317- 4
BS EN 60317-7
BS EN 60317-15
BS EN 60297-5-107
BS EN 60305
5-101:2001; (S)
2001 Mechanical Structures for Electronic
Equipment - Dimensions of Mechanical
Structures of the 482,6 mm (19 in) Series Part 5-102: Subracks and Associated Plug-In
Units - Electromagnetic Shielding Provision
IEC 60297-5-102:2001; (S)
2001 Mechanical Structures for Electronic
Equipment - Dimensions of Mechanical
Structures of the 482,6 mm (19in) Series Part 5-103: Subracks and Associated Plug-in
Units - Electrostatic Discharge Protection
IEC 60297-5-103:2001; (S)
2001 Mechanical Structures for Electronic
Equipment - Dimensions of Mechanical
Structures of the 482,6 mm (19in) Series Part 5-104: Subracks and Associated Plug-in
Units - Keying IEC 60297-5-104:2001; (S)
2001 Mechanical Structures for Electronic
Equipment - Dimensions of Mechanical
Structures of the 482,6 mm (19 in) Series
Part 5-105: Subracks and Associated Plug-In
Units - Alignments and/or Earth Pin IEC
60297-5-105:2001; (S)
1995 Particular Types of Winding Wires Part
4: Solderable Polyurethane Enamelled Round
Copper Wire, Class 130 IEC 60317-4: 1990;
(E)
1995 Amd 1 Particular Types of Winding
Wires Part 7: Polyimide Enamelled Round
Copper Wire, Class 220 AMD 8891;
November 15, 1995; IEC 60317-7: 1990; (E)
1996 Particular Types of Winding Wires Part
15: Polyesterimide Enamelled Round
Aluminium Wire, Class 180 IEC 60317-15:
1990; (E)
2001 Mechanical Structures for Electronic
Equipment - Dimensions of Mechanical
Structures of the 482,6 mm (19 in) Series
Part 5-107: Subracks and Associated Plug-In
Units - Rear Mounted Plug-In Units IEC
60297-5-107:2001; (S)
1996 Insulators for Overhead Lines with a
Nominal Voltage Above 1 kV - Ceramic or
Glass Insulator Units for a.c. Systems Characteristics of Insulator Units of the Cap
BS EN 60315-3
BS EN 60315-7
BS EN 60315-9
BS EN 60317-0-6
BS EN 60317-1
BS EN 60317-1
BS EN 60317-4
BS EN 60317-4
BS EN 60317-7
and Pin Type (IEC 305: 1995) (Q)
2000 AMD 1 Methods of Measurement on
Radio Receivers for Various Classes of
Emission Part 3: Receivers for AmplitudeModulated Sound-Broadcasting Emissions
AMD 10596; April 2000; Renumbers BS
4054-3:1996; (S)
1996 Methods of Measurement on Radio
Receivers for Various Classes of Emission
Part 7: Methods of Measurement on Digital
Satellite Radio (DSR) Receivers (IEC 315-7:
1995) (S)
1997 Methods of Measurement on Radio
Receivers for Various Classes of Emission
Part 9: Measurement of the Characteristics
Relevant to Radio Data System (RDS)
Reception Same as BS 4054: Part 9: 1997;
IEC 315-9: 1996; (S)
2001 Particular Types of Winding Wires Part 0-6: General Requirements - Glass-Fibre
Wound Resin or Varnish Impregnated, Bare
or Enamelled Round Copper Wire IEC
60317-0-6:2001; (E)
1995 Specifications for Particular Types of
Winding Wires Part 1: Polyvinyl Acetal
Enamelled Round Copper Wire, Class 105
Renumbers BS 6811: Section 3.5: 1993 ; IEC
60317-1: 1990; (E)
1995 Amd 1 Particular Types of Winding
Wires Part 1: Polyvinyl Acetal Enamelled
Round Copper Wire, Class 105 AMD 8889;
November 15, 1995; IEC 60317-1: 1990; (E)
1995 Amd 1 Particular Types of Winding
Wires Part 4: Solderable Polyurethane
Enamelled Round Copper Wire, Class 130
AMD 8886; November 1995; Renumbers BS
6811: Section 3.1: 1993; IEC 60317-4: 1990;
(E)
1995 Amd 2 Particular Types of Winding
Wires Part 4: Solderable Polyurethane
Enamelled Round Copper Wire, Class 130
AMD 10903; August 2000; Renumbers BS
6811: Section 3.1: 1993; IEC 603174:1990;(E)
1995 Specifications for Particular Types of
Winding Wires Part 7: Polyimide Enamelled
BS EN 60317-8
BS EN 60317-8
BS EN 60317-11
BS EN 60317-16
BS EN 60317-17
BS EN 60317-18
BS EN 60317-11
BS EN 60317-12
BS EN 60317-12
BS EN 60317-13
Round Copper Wire, Class 220 Renumbers
BS 6811: Section 3.8: 1993; IEC 60317-7:
1990; (E)
1995 Specifications for Particular Types of
Winding Wires Part 8: Polyesterimide
Enamelled Round Copper Wire, Class 180
Renumbers BS 6811: Section 3.2: 1993; IEC
60317-8: 1990; (E)
1995 Amd 1 Particular Types of Winding
Wires Part 8: Polyestermide Enamelled
Round Copper Wire, Class 180 AMD 8887;
November 15, 1995; IEC 60317-8: 1990; (E)
2000 Specifications for Particular Types of
Winding Wires Part 11: Bunched Solderable
Polyurethane Enamelled Round Copper
Wires, Class 130, with Silk Covering IEC
60317-11:1999; (E)
1996 Particular Types of Winding Wires Part
16: Polyester Enamelled Rectangular Copper
Wire, Class 155 IEC 60317-16: 1990; (E)
1996 Particular Types of Winding Wires Part
17: Polyvinyl Acetal Enamelled Rectangular
Copper Wire, Class 105 IEC 60317-17: 1990;
(E)
1996 Specifications for Particular Types of
Winding Wires Part 18: Polyvinyl Acetal
Enamelled Rectangular Copper Wire, Class
120 IEC 60317-18: 1990; (E)
1996 Amd 1 Specifications for Particular
Types of Winding Wires Part 11: Bunched
Solderable Polyurethane Enamelled Round
Copper Wires, Class 130, with Silk Covering
AMD 10385; May 15, 1999; Renumbers BS
6811: Section 3.6: 1993; (E)
1995 Specifications for Particular Types of
Winding Wires Part 12: Polyvinyl Acetal
Enamelled Round Copper Wire, Class 120
Renumbers BS 6811: Section 3.7: 1993; IEC
60317-12: 1990; (E)
1995 Amd 1 Particular Types of Winding
Wires Part 12: Polyvinyl Acetal Enamelled
Round Copper Wire, Class 120 AMD 8890;
November 15, 1995; IEC 60317-12: 1990;
(E)
1995 Specifications for Particular Types of
Winding Wires Part 13: Polyester or
BS EN 60317-13
BS EN 60317-14
BS EN 60317-14
BS EN 60317-15
BS EN 60317-16
BS EN 60317-17
BS EN 60317-18
BS EN 60317-20
Polyesterimide Overcoated with PolyamideImide Enamelled Round Copper Wire, Class
200 Renumbers BS 6811: Section 3.3: 1993;
IEC 60317-13: 1990; (E)
1995 Amd 1 Particular Types of Winding
Wires Part 13: Polyester or Polyesterimide
Overcoated with Polyamide-Imide Enamelled
Round Copper Wire, Class 200 AMD 8888;
November 15, 1995; IEC 60317-13: 1990;
(E)
1995 Specifications of Particular Types of
Winding Wires Part 14: Polyvinyl Acetal
Enamelled Round Aluminium Wire, Class
105 Renumbers BS 6811: Section 5.1: 1993;
IEC 60317-14: 1990; (E)
1995 Amd 1 Particular Types of Winding
Wires Part 14: Polyvinyl Acetal Enamelled
Round Aluminium Wire, Class 105 AMD
8892; November 15, 1995; IEC 60317-14:
1990; (E)
1996 Amd 1 Specifications for Particular
Types of Winding Wires Part 15:
Polyesterimide Enamelled Round Aluminium
Wire, Class 180 AMD 9070; April 1996;
Renumbers BS 6811: Section 5.2: 1993; IEC
60317-15: 1990; (E)
1996 Amd 1 Specifications for Particular
Types of Winding Wires Part 16: Polyester
Enamelled Rectangular Copper Wire, Class
155 AMD 9067; April 1996; Renumbers BS
6811: Section 4.4: 1993; IEC 60317-16:
1990; (E)
1996 Amd 1 Specifications for Particular
Types of Winding Wires Part 17: Polyvinyl
Acetal Enamelled Rectangular Copper Wire,
Class 105 AMD 9068; April 1996;
Renumbers BS 6811: Section 4.5: 1993; IEC
60317-17: 1990; (E)
1996 Amd 1 Specifications for Particular
Types of Winding Wires Part 18: Polyvinyl
Acetal Enamelled Rectangular Copper Wire,
Class 120 AMD 9069; April 1996; Renumber
BS 6811: Section 4.6: 1993; IEC 60317-18:
1990; (E)
1996 Specifications for Particular Types of
Winding Wires Part 20: Solderable
BS EN 60317-20
BS EN 60317-20
BS EN 50272-2
BS EN 50289-1-2
BS EN 50286
BS EN 50271
BS EN 50288-2-1
BS EN 50288-2-2
BS EN 50288-3-1
Polyurethane Enamelled Round Copper
Wire, Class 155 IEC 60317-20: 1990; (E)
1996 Amd 1 Specifications for Particular
Types of Winding Wires Part 20: Solderable
Polyurethane Enamelled Round Copper
Wire, Class 155 AMD 9059; April 1996;
Renumbers BS 6811: Section 3.9: 1993; IEC
60317-20: 1990; (E)
1996 Amd 2 Specifications for Particular
Types of Winding Wires Part 20: Solderable
Polyurethane Enamelled Round Copper
Wire, Class 155 AMD 10927; August 2000;
Renumbers BS 6811: Section 3.9: 1993; IEC
60317-20: 1990;(E)
2001 Safety Requirements for Secondary
Batteries and Battery Installations - Part 2:
Stationary Batteries (E)
2001 Communication Cables - Specifications
for Test Methods - Part 1-2: Electrical Test
Methods - DC Resistance (S)
2001 Electrical Insulating Protective
Clothing for Low-Voltage Installations (N)
2002 Electrical Apparatus for the Dection
and Measurement of Combustible Gases,
Toxic Gases or Oxygen - Requirements and
Tests for Apparatus Using Software and/or
Digital Technologies (E)
2001 Multi-Element Metallic Cables Used in
Analogue and Digital Communication and
Control - Part 2-1: Sectional Specification for
Screened Cables Characterized up to 100
MHz - Horizontal and Building Backbone
Cables Supersedes BS EN 50167: 1996 and
BS EN
2001 Multi-Element Metallic Cables Used in
Analogue and Digital Communication and
Control - Part 2-2: Sectional Specification for
Screened Cables Characterized up to 100
MHz - Work Area and Patch Cord Cables
Supersedes BS EN 50168: 1996; (S)
2001 Multi-Element Metallic Cables Used in
Analogue and Digital Communication and
Control - Part 3-1: Sectional Specification for
Unscreened Cables Characterized up to 100
MHz - Horizontal and Building Backbone
Cables (S)
BS EN 50288-3-2
BS EN 50288-4-1
BS EN 50288-4-2
BS EN 50289-1-3
BS EN 50289-1-4
BS EN 50289-1-5
BS EN 50289-1-7
BS EN 50289-1-8
BS EN 50289-1-9
BS EN 50289-1-11
BS EN 50289-3-1
BS EN 50289-3-2
2001 Multi-Element Metallic Cables Used in
Analogue and Digital Communication and
Control - Part 3-2: Sectional Specification for
Unscreened Cables Characterized up to 100
MHz - Work Area and Patch Cord Cables (S)
2001 Multi-Element Metallic Cables Used in
Analogue and Digital Communication and
Control - Part 4-1: Sectional Specification for
Screened Cables Characterized up to 600
MHz - Horizontal and Building Backbone
Cables (S)
2001 Multi-Element Metallic Cables Used in
Analogue and Digital Communication and
Control - Part 4-2: Sectional Specification for
Screened Cables Characterized up to 600
MHz - Work Area and Patch Cord Cables (S)
2001 Communication Cables - Specifications
for Test Methods - Part 1-3: Electrical Test
Methods - Dielectric Strength (S)
2001 Communication Cables - Specifications
for Test Methods - Part 1-4: Electrical Test
Methods - Insulation Resistance (S)
2001 Communication Cables - Specifications
for Test Methods - Part 1-5: Electrical Test
Methods - Capacitance (S)
2001 Communication Cables - Specifications
for Test Methods - Part 1-7: Electrical Test
Methods - Velocity of Propagation (S)
2001 Communication Cables - Specifications
for Test Methods - Part 1-8: Electrical Test
Methods - Attenuation (S)
2002 Communication Cables - Specifications
for Test Methods - Part 1-9: Electrical Test
Methods - Unbalance Attenuation
(Longitudinal Conversion Loss, Longitudinal
Conversion Transfer Loss) (S)
2002 Communication Cables - Specifications
for Test Methods - Part 1-11: Electrical Test
Methods - Characteristic Impedance, Input
Impedance, Return Loss (S)
2001 Communication Cables - Specifications
for Test Methods - Part 3-1: Mechanical Test
Methods - General Requirements (S)
2001 Communication Cables - Specifications
for Test Methods - Part 3-2: Mechanical Test
Methods - Tensile Strength and Elongation
BS EN 50289-3-5
BS EN 50289-3-7
BS EN 50289-3-4
BS EN 50289-3-8
BS EN 50289-3-9
BS EN 50289-3-11
BS EN 50289-3-12
BS EN 50289-3-16
BS EN 50289-4-1
BS EN 50289-4-6
BS EN 50289-4-9
BS EN 50290-2-20
BS EN 50310
BS EN 50319
for Conductor (S)
2001 Communication Cables - Specifications
for Test Methods - Part 3-5: Mechanical Test
Methods - Crush Resistance of the Cable (S)
2001 Communication Cables - Specifications
for Test Methods - Part 3-7: Mechanical Test
Methods - Abrasion Resistance of the Cable
Sheath (S)
2001 Communication Cables - Specifications
for Test Methods - Part 3-4: Mechanical Test
Methods - Tensile Strength, Elongation and
Shrinkage of Insulation and Sheath (S)
2001 Communication Cables - Specifications
for Test Methods - Part 3-8: Mechanical Test
Methods - Abrasion Resistance of Cable
Sheath Markings (S)
2001 Communication Cables - Specifications
for Test Methods - Part 3-9: Mechanical Test
Methods - Bending Tests (S)
2001 Communication Cables - Specifications
for Test Methods - Part 3-11: Mechanical
Test Methods - Cable Cut-Through
Resistance (S)
2001 Communication Cables - Specifications
for Test Methods - Part 3-12: Mechanical
Test Methods - Shot Gun Damage (S)
2001 Communication Cables - Specifications
for Test Methods - Part 3-16: Mechanical
Test Methods - Cable Tensile Performance
(S)
2001 Communication Cables - Specifications
for Test Methods - Part 4-1: Environmental
Test Methods - General Requirements (S)
2001 Communication Cables - Specifications
for Test Methods - Part 4-6: Environmental
Test Methods - Temperature Cycling (S)
2001 Communication Cables - Specifications
for Test Methods - Part 4-9: Environmental
Test Methods - Pneumatic Resistance (S)
2001 Communication Cables - Part 2-20:
Common Design Rules and Construction General (S)
2000 Application of Equipotential Bonding
and Earthing Buildings with Information
Technology Equipment (S)
1999 Proximity Devices - Requirements for
BS EN 50320
BS EN 50325-1
BS EN 50325-2
BS EN 50325-3
BS EN 50332-1
BS EN 50333
BS EN 50334
BS EN 50342
BS EN 50344-1
BS EN 50353
BS EN 55020
BS EN 55020
BS EN 50338
Proximity Devices with Analogue Output (E)
2001 Digital Audio Broadcasting System Specification of the DAB Command Set for
Receivers (DCSR) (S)
2001 Industrial Communications Subsystem
Based on ISO 11898 (CAN) for ControllerDevice Interfaces - Part 1: General
Requirements (S)
2001 Industrial Communications Subsystem
Based on ISO 11898 (CAN) for ControllerDevice Interfaces - Part 2: DeviceNet (S)
2001 Industrial Communications Subsystem
Based on ISO 11898 (CAN) for ControllerDevice Interfaces - Part 3: Smart Distributed
System (SDS) (S)
Sound System Equipment - Headphones and
Earphones Associated with Portable Audio
Equipment - Maximum Sound Pressure Level
Measurement Methodology and Limit
Considerations - Part 1: General Method for
2001 Audio, Video and Similar Electronic
Apparatus - Routine Electrical Safety Testing
in Production (S)
2001 Marking by Inscription for the
Identification of Cores of Electric Cables (E)
2001 Lead-Acid Starter Batteries - General
Requirements, Methods of Test and
Numbering (E)
2002 Routine Tests for Controls within the
Scope of the EN 60730 Series - Part 1:
General Requirements (L)
2001 Insulating Oil - Determination of Fibre
Contamination by the Counting Method
Using a Microscope (F)
1995 Electromagnetic Immunity of Broadcast
Receivers and Associated Equipment
Replaces BS 905: Part 2: 1991 (S)
1995 Corr 1 Electromagnetic Immunity of
Broadcast Receivers and Associated
Equipment CORR 13443: January 30, 2002;
(S)
2001 Safety of Household and Similar
Electrical Appliances - Particular
Requirements For Pedestrian Controlled
Battery Powered Electrical Lawnmowers
Supersedes BS 3456-2.42: 1997; (L)
BS EN 50347
BS EN 50360
BS EN 50361
BS EN 50377-3-1
BS EN 55020
BS EN 55020
BS EN 55020
BS EN 55020
BS EN 55103-1
BS EN 55103-2
BS EN 60034-2
2001 General Purpose Three-Phase Induction
Motors Having Standard Dimensions and
Outputs - Frame Numbers 56 to 315 and
Flange Numbers 65 to 740 Supersedes BS
5000-10: 1978; (Q)
2001 Product Standard to Demonstrate the
Compliance of Mobile Phones with the Basic
Restrictions Related to Human Exposure to
Electromagnetic Fields (300 MHz - 3 GHz)
(S)
2001 Basic Standard for the Measurement of
Specific Absorption Rate Related to Human
Exposure to Electromagnetic Fields from
Mobile Phones (300 MHz - 3 GHz) (S)
2001 Connectors Sets and Interconnect
Components to Be Used in Optical Fibre
Communication Systems - Product
Specifications Part 3-1: Type SG Terminated
on IEC 60793-2 Category A1a and A1b
Multimode Fibre (S)
1995 Amd 1 Electromagnetic Immunity of
Broadcast Receivers and Associated
Equipment (AMD 9175) November 15, 1996
(S)
1995 Amd 2 Electromagnetic Immunity of
Broadcast Receivers and Associated
Equipment AMD 9512; July 3,1997;
Replaces BS 905: Part 2: 1991; (S)
1995 Amd 3 Electromagnetic Immunity of
Broadcast Receivers and Associated
Equipment AMD 9964; April 1998; (S)
1995 Amd 4 Electromagnetic Immunity of
Broadcast Receivers and Associated
Equipment AMD 10711; April 2000; (S)
1997 Electromagnetic Compatibility Product Family Standard for Audio, Video,
Audio-Visual and Entertainment Lighting
Control Apparatus for Professional Use Part
1: Emission (S)
1997 Electromagnetic Compatibility Product Family Standard for Audio, Video,
Audio-Visual and Entertainment Lighting
Control Apparatus for Professional Use Part
2: Immunity (S)
1999 Rotating Electrical Machines - Part 2:
Methods for Determining Losses and
BS EN 60034-3
BS EN 60034-4
BS EN 60034-5
BS EN 60034-15
BS EN 60044-1
BS EN 60044-1
BS EN 60044-2
BS EN 60044-2
BS EN 60034-16-1
BS EN 60034-18-22
BS EN 60044-2
Efficiency of Rotating Electrical Machinery
From Tests (Excluding Machines for
Traction Vehicles) Supersedes BS 4999-102:
1987; (F)
1996 Amd 1 Rotating Electrical Machines
Part 3: Specific Requirements for TurbineType Synchronous Machines (AMD 9035)
July 15, 1996 (Q)
1995 Rotating Electrical Machines Part 4:
Methods for Determining Synchronous
Machine Quantities from Tests (F)
2001 Rotating Electrical Machines - Part 5:
Degrees of Protection Provided by the
Integral Design of Rotating Electrical
Machines (IP Code) - Classification
Supersedes BS 4999-105:1988; IEC 600345:2000; (F)
1996 Rotating Electrical Machines Part 15:
Impulse Voltage Withstand Levels of
Rotating a.c. Machines with Form-Wound
Stator Coils (IEC 34-15: 1995) (F)
1999 Instrument Transformers - Part 1:
Current Transformers Supersedes BS 7626:
1993; IEC 60044-1: 1996; (E)
1999 Amd 1 Instrument Transformers - Part
1: Current Transformers AMD 13034:June
2001; Supersedes BS 7626: 1993; IEC
60044-1: 1996; (E)
1999 Instrument Transformers - Part 2:
Inductive Voltage Transformers IEC 600442: 1997; (E)
1999 Amd 2 Instrument Transformers - Part
2: Inductive Voltage Transformers AMD
13297:September 2001; Supersedes BS
7625:1993; IEC 60044-2:1997; (E)
1996 Amd 1 Rotating Electrical Machines
Part 16: Excitation Systems for Synchronous
Machines Chapter 1: Definitions (IEC 34-161: 1991) (AMD 9078) June 15, 1996 (F)
2001 Rotating Electrical Machines - Part 1822: Functional Evaluation of Insulation
Systems - Test Procedures for Wire-Wound
Windings - Classification of Changes and
Insulation Component Substitutions IEC
60034-18-22:2000; (F)
1999 Corr.1 Instrument Transformers - Part
BS EN 60044-6
BS EN 60044-7
BS EN 60051-1
BS EN 60059
BS EN 60061-1
BS EN 60061-1
BS EN 60061-1
BS EN 60061-1
BS EN 60061-1
BS EN 60061-3
BS EN 60061-3
2: Inductive Voltage Transformers CORR
10807; December 1999; IEC 60044-2: 1997;
(E)
1999 Instrument Transformers - Part 6:
Requirements for Protective Current
Transformers for Transient Performance IEC
60044-6: 1992; (E)
2000 Instrument Transformers - Part 7:
Electronic Voltage Transformers IEC 600447: 1999; (E)
1999 Direct Acting Indicating Analogue
Electrical Measuring Instruments and Their
Accessories - Part 1: Definitions and General
Requirements Common to All Parts
Supersedes BS 89-1: 1990; IEC 60051-1:
1997; (E)
1999 IEC Standard Current Ratings IEC
60059: 1999; (H)
1997 Lamp Caps and Holders Together with
Gauges for the Control of Interchangeability
and Safety Part 1: Lamp Caps (E)
1997 Amd 1 Lamp Caps and Holders
Together with Gauges for the Control of
Interchangeability and Safety Part 1: Lamp
Caps AMD 9694; November 15, 1997; (E)
1997 Amd 2 Lamp Caps and Holders
Together with Gauges for the Control of
Interchangeability and Safety Part 1: Lamp
Caps AMD 10186; February 15, 1999; (E)
1997 Amd 3 Lamp Caps and Holders
Together with Gauges for the Control of
Interchangeability and Safety Part 1: Lamp
Caps AMD 10583; December 1999;
Incorporating Amendments Nos. 1, 2 and 3;
(E)
1997 Amd 4 Lamp Caps and Holders
Together with Gauges for the Control of
Interchangeability and Safety Part 1: Lamp
Caps AMD 11008:July 2001; (E)
1997 Amd 1 Lamp Caps and Holders
Together with Gauges for the Control of
Interchangeability and Safety Part 3: Gauges
AMD 9696; November, 1997: (E)
1997 Amd 2 Lamp Caps and Holders
Together with Gauges for the Control of
Interchangeability and Safety Part 3: Gauges
BS EN 60061-3
BS EN 60061-3
BS EN 60068-2-1
BS EN 60068-2-9
BS EN 60068-2-11
BS EN 60068-2-13
BS EN 60068-2-1
BS EN 60068-2-5
BS EN 60068-2-14
BS EN 60068-2-17
BS EN 60068-2-18
BS EN 60068-2-27
AMD 10188; February 15, 1999; (E)
1997 Amd 3 Lamp Caps and Holders
Together with Gauges for the Control of
Interchangeability and Safety Part 3: Gauges
AMD 10579; December, 1999; (E)
1997 Corr 1 Lamp Caps and Holders
Together with Gauges for the Control of
Interchangeability and Safety Part 3: Gauges
AMD 9999; April 1998 (Corrigendum No.
1); (E)
1993 Environmental Testing Part 2.1: Tests
Tests A. Cold Formerly BS 2011: Part 2.1A
1990; Replaces BS 2011-2-1A: 1977 (G)
2000 Environmental Testing - Part 2: Tests Guidance for Solar Radiation Testing
Supersedes BS 2011-2.2Sa:1977; IEC 600682-9:1975; (G)
1999 Environmental Testing - Part 2: Test
Ka: Salt Mist Supersedes BS 2011: Pt 2.1 Ka:
1982; IEC 60068-2-11: 1981; (G)
1999 Environmental Testing - Part 2: Tests Test M: Low Air Pressure Supersedes BS
2011: Part 2.1 M: 1984; IEC 60068-2-13:
1983; (G)
1993 Amd 1 Environmental Testing Part 2.1:
Tests Tests A. Cold (AMD 8425) January 15,
1995 (Formerly BS 2011: Part 2.1A: 1990
Replaces BS 2011-2-1A: 1977) (G)
2000 Environmental Testing - Part 2: Tests Test Sa: Simulated Solar Radiation at Ground
Level IEC 60068-2-5:1975; Supersedes BS
2011:Part 2.1 SA:1977; (G)
2000 Environmental Testing - Part 2: Tests Test N: Change of Temperature Supersedes
BS 2011-2.1N: 1985; IEC 60068-2-14: 1984;
(G)
1995 Environmental Testing Part 2: Tests
Test Q: Sealing (IEC 68-2-17: 1994)
(Replaces BS 2011: Part 2.1QL 1981) (G)
2001 Environmental Testing - Part 2-18:
Tests - Tests R and Guidance: Water
Supersedes BS 2011-2.1R:1990; IEC 600682-18:2000; (G)
1993 Amd 1 Environmental Testing Part 2:
Tests Test Ea and Guidance: Shock (IEC 682-27: 1987) (Formerly BS 2011: Part 2.1EaL
BS EN 60068-2-29
BS EN 60068-2-30
BS EN 60068-2-31
BS EN 60068-2-32
BS EN 60068-2-33
BS EN 60068-2-38
BS EN 60068-2-51
BS EN 60068- 2-52
BS EN 60068-2-55
BS EN 60068-2-57 ED.2
BS EN 60068-2-60
1988 Replaces BS 2011-2-1Ea: 1977) (G)
1993 Amd 1 Environmental Testing Part 2:
Tests Test Eb and Guidance: Bump (IEC 682-29: 1987) (AMD 7827) June 15, 1993
(Formerly BS 2011: Part 2.1Eb: 1987.
Replaces BS 2011-2-1Eb: 1977) (G)
1999 Environmental Testing - Part 2: Tests Test Db and Guidance: Damp Heat, Cyclic
(12 + 12 Hour Cycle) IEC 60068-2-30: 1980,
Including Amendment 1: August 1985; (G)
1993 Amd 2 Environmental Testing Part 2.1:
Tests Test Ec. Drop and Topple, Primarily
for Equipment-Type Specimens (IEC 68-231: 1969) (AMD 7921) September 15, 1993
(Formerly BS 2011: Part 2.1Ec: 1977) (G)
1993 Amd 1 Environmental Testing Part 2.1:
Tests Test Ed. Free Fall (IEC 68-2-32: 1975)
(AMD 7920) September 15, 1993 (Formerly
BS 2011: Part 2.1Ed: 1992 Replaces BS
2011: Part 2.1Ed: 1977) (G)
2000 Environmental Testing - Part 2: Tests Guidance on Change of Temperature Tests
IEC 60068-2-33:1971 Plus Amendement
1:1978, Supersedes BS 2011-2.2N:1977 (G)
1999 Environmental Testing - Part 2: Tests Test Z/AD: Composite
Temperature/Humidity Cyclic Test
Supersedes BS 2011-2.1 Z/AD: 1977; IEC
60068-2-38: 1974; (G)
2000 Environmental Testing - Part 2: Tests Tests Z/BFc: Combined Dry Heat/Vibration
(Sinusoidal) Tests for Both Heat-Dissipating
and Non-Heat Dissipating Specimens
Supersedes BS 2011-2.1Z/BFc:1984; IEC
60068-2-51:1983; (G)
1996 Environmental Testing Part 2: Tests
Test Kb. Salt Mist Cyclic (Sodium Chloride
Solution ) (IEC 68-2-52: 1996) (G)
1993 Environmental Testing Part 2: Tests
Test E3 and Guidance: Bounce (IEC 68-2-55:
1987) (Formerly BS 2011: Part 2.1Ee: 1988)
(G)
2000 Environmental Testing - Part 2-57:
Tests - Test Ff: Vibration - Time-History
Method IEC 60068-2-57 Ed.2: 1999; (G)
1996 Environmental Testing Part 2: Tests
BS EN 60068-2-67
BS EN 60068-2-68
BS EN 60068-2-58
BS EN 60068-2-59
BS EN 60068-2-69
BS EN 60068-2-70
BS EN 60068-2-74
BS EN 60068-2-77
BS EN 60068-2-78
BS EN 60068-3-1
BS EN 60068-3-2
Test Ke. Flowing Mixed Gas Corrosion Test
(IEC 68-2-60: 1995) (G)
1996 Environmental Testing Part 2: Tests
Test Cy. Damp Heat, Steady State,
Accelerated Test Primarily Intended for
Components (IEC 68-2-67: 1995) (G)
1996 Environmental Testing Part 2: Tests
Test L. Dust and Sand (IEC 68-2-68: 1994)
(G)
1999 Environmental Testing - Part 2-58:
Tests - Test Td: Test Methods for
Solderability, Resistance to Dissolution of
Metallization and to Soldering Heat of
Surface Mounting Devices (SMD) IEC
60068-2-58: 1999; Supersedes BS 2011-2Td:
1990; (G)
1993 Amd 1 Environmental Testing Part 2:
Test Methods Test Fe: Vibration - Sine Beat
Method (AMD 7841) July 15, 1993
(Formerly BS 2011: Part 2.1Fe: 1991) (G)
1996 Environmental Testing Part 2: Tests
Test Te. Solderability Testing of Electronic
Components for Surface Mount Technology
by the Wetting Balance Method (IEC 68-269: 1995) (G)
1996 Environmental Testing Part 2: Tests
Test Xb. Abrasion of Markings and
Letterings Caused by Rubbing of Fingers and
Hands (IEC 68-2-70: 1995) (G)
2000 Environmental Testing - Part 2: Tests Test Xc: Fluid Contamination IEC 60068-274:1999; (G)
1999 Environmental Testing - Part 2-77:
Tests - Test 77: Body Strength and Impact
Shock IEC 60068-2-77:1999; (G)
2002 Environmental Testing - Part 2-78:
Tests - Test Cab: Damp Heat, Steady State
IEC 60068-2-78:2001; (G)
1999 Environmental Testing - Part 3:
Background Information - Section 1: Cold
and Dry Heat Tests IEC 60068-3-1:1974; and
IEC 60068-3-1A:1978; Supersedes BS 20113A&B:1977 and BS 2011-3A&B: Supp
NO1: (G)
1999 Environmental Testing - Part 3:
Background Information - Section 2:
BS EN 60068-3-3
BS EN 60068-3-4
BS EN 60068-3-5
BS EN 60068-3-6
BS EN 60068-3-7
BS EN 60068-4
BS EN 60068-5-2
BS EN 60071-2
BS EN 60076-2
BS EN 60076-3
BS EN 60076-10
Combined Temperature/Low Air Pressure
Tests Supersedes BS 2011-3Z/AM & Z/BM:
1977; IEC 60068-3-2: 1976; (G)
1993 Amd 1 Environmental Testing Part 3:
Guidance Seismic Test Methods for
Equipments AMD 7842; July 15, 1993;
Formerly BS 2011: Section 4.3: 1991; (G)
2002 Environmental Testing - Part 3-4:
Supporting Documentation and Guidance Damp Heat Tests IEC 60068-3-4:2001; (G)
2002 Environmental Testing - Part 3-5:
Supporting Documentation and Guidance Confirmation of the Performance of
Temperature Chambers IEC 60068-3-5:
2001; (G)
2002 Environmental Testing - Part 3-6:
Supporting Documentation and Guidance Confirmation of the Performance of
Temperature/Humidity Chambers IEC
60068-3-6: 2001; (G)
2002 Environmental Testing - Part 3-7:
Supporting Documentation and Guidance Measurements in Temperature Chambers for
Tests A and B (With Load) IEC 60068-3-7:
2001; (G)
1996 Environmental Testing Part 4:
Information for Specification Writers Test
Summaries Supersedes BS 2011: Part 4:
Section 4.4: 1993; IEC 68-4: 1987 (G)
2000 Environmental Testing - Part 5: Guide
to Drafting of test Methods - Terms and
Definitions Supersedes BS 2011: Section 5.2:
1992; IEC 60068-5-2: 1990; (G)
1997 Insulation Co-Ordination Part 2:
Application Guide IEC 71-2: 1996;
Supersedes BS 5622: Part: 1979; (F)
1997 Power Transformers Part 2:
Temperature Rise Supersedes BS 171: Part 2:
1978; (E)
2001 Power Transformers Part 3: Insulation
Levels, Dielectric Tests and External
Clearances in Air Supersedes BS 171: Part
3:1987 which is Withdrawn; (E)
2001 Power Transformers - Part 10:
Determination of Sound Levels IEC 6007610:2001; Supersedes BS EN 60551:1993; (E)
BS EN 60079-10
BS EN 60079-10
BS EN 60086-1
BS EN 60086-5
BS EN 60092-507
BS EN 60094-1
BS EN 60094-1
BS EN 60094-2
BS EN 60094-2
BS EN 60094-3
BS EN 60094-4
1996 Electrical Apparatus for Explosive Gas
Atmospheres Part 10: Classification of
Hazardous Areas (IEC 19-10: 1995) (Q)
1996 Amd 1 Electrical Apparatus for
Explosive Gas Atmospheres Part 10:
Classification of Hazardous Areas (IEC 7910: 1995) (AMD 9340) November 15, 1996
(Q)
1999 AMD 1 Primary Batteries - Part 1:
General Incorporating Amendment 1: 1999;
10850; August 2000; (E)
2001 Primary Batteries - Part 5:Safety of
Batteries with Aqueous Electrolyte (E)
2000 Electrical Installations in Ships Part
507: Pleasure Craft (Q) IEC 60092-507: 2000
1994 Magnetic Tape Sound Recording and
Reproducing Systems Part 1: Specification
for General Conditions and Requirements
(IEC 94-1: 1981) (S)
1994 Amd 1 Magnetic Tape Sound
Recording and Reproducing Systems Part 1:
Specifications for General Conditions and
Requirements (IEC 94-1: 1981) (AMD 8915)
(November 15, 1995 (Also Numbered BS
6288: Part 1:1994 Replaces BS 6288: Part 1:
1982 (S)
1996 Magnetic Tape Sound Recording and
Reproducing Systems Part 2: Calibration
Tapes (IEC 94-2: 1994) (Replaces BS EN
60094-2: 1994) (S)
1994 Amd 2 Magnetic Tape Sound
Recording and Reproducing Systems Part 2:
Specification for Calibration Tapes (IEC 942: 1975) (AMD 8299) June 15, 1994 (Also
Numbered BS 6288: Part 4: 1987) (S)
1997 Magnetic Tape Sound Recording and
Reproducing Systems Part 3: Methods of
Measuring the Characteristics or Recording
and Reproducing Equipment for Sound on
Magnetic Tape IEC 94-3: 1979;
Renumbering BS 6288: Part 3: 1990; (S)
1994 Amd 1 Magnetic Tape Sound
Recording and Reproducing Systems Part 4:
Mechanical Magnetic Tape Properties (IEC
94-4: 1986) (AMD 8396) February 15, 1995
(Also Numbered BS 6288: Part 4: 1987) (S)
BS EN 60094-4
BS EN 60094-5
BS EN 60094-5
BS EN 60094-7
BS EN 60094-7
BS EN 60095-2
BS EN 60099-5
BS EN 60099-5
BS EN 60095-2
BS EN 60107-1
1994 Amd 1 Magnetic Tape Sound
Recording and Reproducing Systems Part 4:
Mechanical Magnetic Tape Properties (IEC
94-4: 1986) (AMD 8706) November 15,
1995 (Also Numbered BS 6288: Part 4:
1987)(S)
1994 Amd 1 Magnetic Tape Sound
Recording and Reproducing Systems Part 5:
Specification for Electrical Magnetic Tape
Properties AMD 9292; February 1997; IEC
94-5: 1988; (S)
1994 Amd 2 Magnetic Tape Sound
Recording and Reproducing Systems Part 5:
Specification for Electrical Magnetic Tape
Properties (AMD 8126) March 15, 1994 (IEC
94-5: 1988) (S)
1994 Magnetic Tape Sound Recording and
Reproducing Systems Part 7: Specification
for Cassettes for Commercial Tape Records
and Domestic Use (IEC 94-7: 1986) (Read in
Conjunction with BS EN 60094-1.Also
Numbered BS 6288: Part 7 : 1994 Replaces
BS 6288: Par
1994 Amd 1 Magnetic Tape Sound
Recording and Reproducing Systems Part 7:
Specification for Cassettes for Commercial
Tape Records and Domestic Use AMD 9287;
January 15, 1997; IEC 94-7: 1986; (S)
1993 Amd 1 Lead-Acid Starter Batteries Part
2: Dimensions of Batteries and Dimensions
and Marking of terminals (AMD 8738)
October 15, 1995 (E)
1997 Surge Arresters Part 5: Selection and
Application Recommendations (E)
1997 Amd 1 Surge Arresters - Part 5:
Selection and Application Recommendations
AMD 13113; October 2001; (E)
1993 Lead-Acid Starter Batteries Part 2:
Dimensions of Batteries and Dimensions and
Marking of Terminals (Supersedes BS 3911:
Part 1: 1982 & Part 2: 1987) (E)
1997 Methods of Measurement on Receivers
for Television Broadcast Transmissions Part
1: General Considerations - Measurements on
Displays at Radio and Video Frequencies
IEC 60107-1: 1997; Supersedes BS 3549: PT
BS EN 60107-2
BS EN 60107-7
BS EN 60107-8
BS EN 60118-0
BS EN 60118-0
BS EN 60118-6
BS EN 60118-6
BS EN 45510-4-6
BS EN 45510-4-7
BS EN 45510-4-8
BS EN 45510-4-9
1: 1979; (S)
1997 Methods of Measurement on Receivers
for Television Broadcast Transmissions Part
2: Audio Channels - General Methods and
Methods for Monophonic Channels IEC
60107-2: 1997; Supersedes BS 3549: PT 2:
1981; (S)
1997 Methods of Measurement on Receivers
for Television Broadcast Transmissions Part
7: HDTV Displays IEC 60107-7: 1997;
Supersedes BS 2550: 1983; (S)
1997 Recommended Methods of
Measurement on Receivers for Television
Broadcast Transmissions Part 8:
Measurements on D2-MAC/Packet
Equipment IEC 60107-8: 1997; (S)
1993 Amd 2 Hearing Aids Part 0: Methods
for Measurement of Electroacoustical
Characteristics (IEC 118-0: 1983) (AMD
7836) August 15, 1993 (Formerly BS 6083:
Part 0: 1984 Replaces BS 3171: 1968)(N)
1993 Amd 1 Hearing Aids Part 0: Methods
for Measurement of Electroacoustical
Characteristics (IEC 118-0: 1983) (AMD
8252) July 15, 1994 (Formerly BS 6083: Part
0: 1984 Replaces BS 3171: 1968)(N)
1999 Hearing Aids - Part 6: Characteristics of
Electrical Input Circuits for Hearing Aids
Renumbers BS 6083: Part 6: 1985; (N)
1999 Hearing Aids - Part 6: Characteristics of
Electrical Input Circuits for Hearing Aids
IEC 60118-6:1999; (N)
1999 Guide for Procurement of Power
Station Equipment - Part 4: Boiler
Auxiliaries - Section 6: Flue Gas
Desulfurization (De-SOx) Plant (Q)
1999 Guide for Procurement of Power
Station Equipment - Part 4: Boiler
Auxiliaries - Section 7: Ash Handling Plant
(Q)
2000 Guide for Procurement of Power
Station Equipment - Part 4-8: Boiler
Auxiliaries - Dust Handling Plant (Q)
2000 Guide for Procurement of Power
Station Equipment - Part 4-9: Boiler
Auxiliaries - Sootblowers (Q)
BS EN 45510-4-10
BS EN 45510-5-1
BS EN 45510-5-2
BS EN 45510-5-3
BS EN 45510-5-4
BS EN 45510-6-1
BS EN 45510-6-2
BS EN 45510-6-3
BS EN 45510-6-4
BS EN 45544-4
BS EN 46003
BS EN 50016
BS EN 50049-1
2000 Guide for Procurement of Power
Station Equipment - Part 4-10: Boiler
Auxiliaries - Flue Gas Dentification (DeNOx) Plant (Q)
1998 Guide for Procurement of Power
Station Equipment - Part 5-1: Steam Turbines
(Q)
1998 Guide for Procurement of Power
Station Equipment - Part 5-2: Gas Turbines
(Q)
1998 Guide for Procurement of Power
Station Equipment - Part 5-3: Wind Turbines
(Q)
1998 Guide for Procurement of Power
Station Equipment - Part 5-4: Hydraulic
Turbines, Storage Pumps and Pump-Turbines
(Q)
1998 Guide for Procurement of Power
Station Equipment - Part 6-1: Turbine
Auxiliaries - Deaerators CORR 10075; June
1998; (Q)
1998 Guide for Procurement of Power
Station Equipment - Part 6-2: Turbine
Auxiliaries - Feedwater Heaters (Q)
1998 Guide for Procurement of Power
Station Equipment - Part 6-3: Turbine
Auxiliaries - Condenser Plant (Q)
2000 Guide for Procurement of Power
Station Equipment - Part 6-4: Turbine
Auxiliaries - Pumps (Q)
2000 Workplace Atmospheres - Electrical
Apparatus Used for the Direct Detection and
Direct Concentration Measurement of Toxic
Gases and Vapours - Part 4: Guide for
Selection, Installation, Use and Maintenance
(N)
1999 Quality Systems - Medical Devices Particular Requirements for the Application
of EN ISO 9003 (G)
1996 Electrical Apparatus for Potentially
Explosive Atmospheres - Pressurized
Apparatus 'p' (Q)
1998 Domestic and Similar Electronic
Equipment Interconnection Requirements:
Peritelevision Connector Supersedes BS
6552: 1990; Also Numbered as BS 6552:
BS EN 50049-1
BS EN 50050
BS EN 50054
BS EN 50256
BS EN 50055
BS EN 50056
BS EN 50056
BS EN 50056
BS EN 50 059
BS EN 50065-1
BS EN 50080
1998; (S)
1998 Amd 1 Domestic and Similar Electronic
Equipment Interconnection Requirements:
Peritelevision Connector AMD 10412;
February 2000; Supersedes BS 6552: 1990;
Also Numbered as BS 6552: 1998; (S)
2001 Electrical Apparatus for Potentially
Explosive Atmospheres - Electrostatic HandHeld Spraying Equipment Supersedes BS
6742-1:1987; (E)
1999 Electrical Apparatus for the Detection
and Measurement of Combustible Gases General Requirements and Test Methods
Superseded by 61779-1:2000;(Q)
1998 Characteristics of DVB Receivers (S)
1999 Electrical Apparatus for the Detection
and Measurement of Combustible Gases Performance Requirements for Group I
Apparatus Indicating up to 5 % (V/V)
Methane in Air Superseded by 61779-2;(Q)
1999 Electrical Apparatus for the Detection
and Measurement of Combustible Gases Performance Requirements for Group I
Apparatus Indicating up to 100 % (V/V)
Methane in Air Superseded by BS EN 617793:2000; (Q)
1991 Electrical Apparatus for the Detection
and Measurement of Combustible Gases
Performance Requirements for Group I
Apparatus Indicating up to 100 Percent (V/V)
Methane (Replaces BS 6020: Part 3: 1982)
1991 Amd 1 Electrical Apparatus for the
Detection and Measurement of Combustible
Gases Performance Requirements for Group I
Apparatus Indicating up to 100 Percent (V/V)
Methane (AMD 9077) June 15, 1996 (Q)
1991 Electrostatic Hand-Held Spraying
Equipment for Non-Flammable Material for
Painting and Finishing
2001 Signalling on Low-Voltage Electrical
Installations in the Frequency Range 3 kHz to
148.5 kHz - Part 1: General Requirements,
Frequency Bands and Electromagnetic
Disturbances (S)
1991 RF Characteristics of MAC AM-VSB
Cable Receivers
BS EN 50081-2
BS EN 50083-7
BS EN 50083-10
BS EN 50090-2-1
BS EN 50081-1
BS EN 50082-1
BS EN 50082-1
BS EN 50083-7
BS EN 50083-9
BS EN 50083-9
1994 Electromagnetic Compatibility Generic Emission Standard Part 2: Industrial
Environment (E)
1997 Cabled Distribution Systems for
Television and Sound Signals Part 7: System
Performance Supersedes BS 6513: Part
3:1984; (S)
1999 Cabled Networks for Television
Signals, Sound Signals and Interactive
Services - Part 10: System Performance for
Return Paths (S)
1996 Home and Building Electronic Systems
(HBES) Part 2-1: System Overview Architecture (S)
1992 Electromagnetic Compatibility Generic Emission Standard Part 1:
Residential, Commercial and Light Industry
Partially Replaced by BS EN 55104:1995;
Superseded by BS EN 61000-6-3:2001, But
Will Remain Current
1998 Electromagnetic Compatibility Generic Immunity Standard Part 1:
Residential, Commercial and Light Industry
Superseded by BS EN 61000-6-1: 2001, But
This Document Will Remain Current; (S)
1992 Electromagnetic Compatibility Generic Immunity Standard Part 1:
Residential, Commercial and Light Industry
Superseded by BS EN 61000-6-1:2001, But
This Document Remains Current; (S)
1997 Amd 1 Cable Networks for Television
Signals and Interactive Services - Part 7:
System Performance AMD 13125:
September 2001; Supersedes BS 6513: Part
3:1984; (S)
1999 Cable Networks for Television Signals,
Sound Signals and Interactive Services Part
9: Interfaces for CATV/SMATV Headends
and Similar Professional Equipment for
DVB/MPEG-2 Transport Streams (S)
1999 Corr 1 Cable Networks for Television
Signals, Sound Signals and Interactive
Services - Part 9: Interfaces for
CATV/SMATV Headends and Similar
Professional Equipment for DVB/MPEG-2
Transport Streams CORR 13223: February 6,
BS EN 50085-2-3
BS EN 50090-2-2
BS EN 50090-3-1
BS EN 50090-3-2
BS EN 50090-8
BS EN 50091-1
BS EN 50091-1-1
BS EN 50091-2
BS EN 50134-2
BS EN 50146
BS EN 50098-2
BS EN 50109-2-1
BS EN 50116
BS EN 50117-1
2002; (S)
2001 Cable Trunking Systems and Cable
Ducting Systems for Electrical Installations Part 2-3: Particular Requirements for Slotted
Cable Trunking Systems Intended for
Installation in Cabinets (E)
1997 Home and Building Electronic Systems
(HBES) Part 2-2: System Overview - General
Technical Requirements (S)
1996 Home and Building Electronic Systems
(HBES) Part 3-1: Aspects of Application
Introduction to the Application Structure (S)
1996 Home and Building Electronic Systems
(HBES) Part 3-2: Aspects of Application
User Process (S)
2001 Home and Building Electronic Systems
(HBES) - Part 8: Conformity Assessment of
Products (S)
1993 Uninterruptable Power Systems (UPS)
Part 1: General and Safety Requirements (E)
1997 Uninterruptable Power Systems (UPS)
Part 1-1: General and Safety Requirements
for UPS Used in Operator Access Areas (E)
1996 Uninterruptable Power Systems (UPS)
Part 2: EMC Requirements (E)
2000 Alarm Systems - Social Alarm Systems
- Part 2: Trigger Devices (R)
2000 Cable Ties for Electrical Installations
(E)
1996 Customer Premises Cabling for
Information Technology Part 2: 2048 kbit/s
ISDN Primary Access and Leased Line
Network Interface (S)
1996 Hand Crimping Tools - Tools for the
Crimp Termination of Electric Cables and
Wires for Low Frequency and Radio
Frequency Applications Part 2: Particular
Requirements Section 2.1: Radio Frequency
Connectors and Concentric Contacts - Open
Throat Tools
1996 Information Technology Equipment
Routine Electrical Safety Testing in
Production (S)
1997 Coaxial Cables Used in Cabled
Distribution Networks Part 1: Generic
Specification (S)
BS EN 50117-1
BS EN 50109-2-1
BS EN 50109-2-3
BS EN 50109-2-3
BS EN 50109-2-4
BS EN 50109-2-4
BS EN 50109-2-5
BS EN 50109-2-5
1997 Amd 1 Coaxial Cables Used in Cabled
Distribution Networks Part 1: Generic
Specification AMD 9791; January 15, 1998;
(S)
1996 Amd 1 Hand Crimping Tools - Tools
for the Crimp Termination of Electric Cables
and Wires for Low Frequency and Radio
Frequency Applications Part 2: Particular
Requirements Section 2.1: Radio Frequency
Connectors and Concentric Contacts - Open
Throat
1996 Hand Crimping Tools - Tools for the
Crimp Termination of Electric Cables and
Wires for Low Frequency and Radio
Frequency Applications Part 2: Particular
Requirements Section 2.3: Contacts of
Electrical Connectors (S)
1996 Amd 1 Hand Crimping Tools - Tools
for the Crimp Termination of Electric Cables
and Wires for Low Frequency and Radio
Frequency Applications Part 2: Particular
Requirements Section 2.3: Contacts of
Electrical Connectors AMD 9634; October
1997; (S)
1996 Hand Crimping Tools - Tools for the
Crimp Termination of Electric Cables and
Wires for Low Frequency and Radio
Frequency Applications Part 2: Particular
Requirements Section 2.4 : Centre Contacts
of RF Connectors, Series SMZ (S)
1996 Amd 1 Hand Crimping Tools - Tools
for the Crimp Termination of Electric Cables
and Wires for Low Frequency and Radio
Frequency Applications Part 2: Particular
Requirements Section 2.4 : Centre Contacts
of RF Connectors, Series SMZ AMD 9635;
October 1
1996 Hand Crimping Tools - Tools for the
Crimp Termination of Electric Cables and
Wires for Low Frequency and Radio
Frequency Applications Part 2: Particular
Requirements Section 2.5 : Termination of
Twin-AX Cable for Databus Applications (S)
1996 Amd 1 Hand Crimping Tools - Tools
for the Crimp Termination of Electric Cables
and Wires for Low Frequency and Radio
BS EN 50117-2
BS EN 50117-3
BS EN 50117-4
BS EN 50117-5
BS EN 50117-6
BS EN 50119
BS EN 50124-1
BS EN 50124-2
BS EN 50128
BS EN 50130-5
BS EN 50131-1
BS EN 50131-1
BS EN 50132-2-1
Frequency Applications Part 2: Particular
Requirements Section 2.5 : Termination of
Twin-AX Cable for Databus Applications
AMD 9636;
1996 Coaxial Cables Used in Cabled
Distribution Networks Part 2: Sectional
Specification for Indoor Drop Cables (S)
1996 Coaxial Cables Used in Cabled
Distribution Networks Part 3: Sectional
Specification for Outdoor Drop Cables (S)
1996 Coaxial Cables Used in Cabled
Distribution Networks Part 4: Sectional
Specification for Distribution and Trunk
Cables (S)
1997 Coaxial Cables Used in Cabled
Distribution Networks Part 5: Sectional
Specification for Indoor Drop Cables for Use
in Networks Operating at Frequencies
Between 5 MHz and 2150 MHz (S)
1997 Coaxial Cables Used in Cabled
Distribution Networks Part 6: Sectional
Specification for Outdoor Drop Cables for
Use in Networks Operating at Frequencies
Between 5 MHz and 2150 MHz (S)
2001 Railway Applications - Fixed
Installations - Electric Traction Overhead
Contact Lines (Q)
2001 Railway Applications - Insulation
Coordination - Part 1: Basic Requirements Clearances and Creepage Distances for All
Electrical and Electronic Equipment (Q)
2001 Railway Applications - Insulation
Coordination - Part 2: Overvoltages and
Related Protection (Q)
2001 Railway Applications Communications, Signalling and Processing
Systems - Software for Railway Control and
Protection Systems (S)
1999 Alarm Systems - Part 5: Environmental
Test Methods (L)
1997 Alarm Systems - Intrusion Systems Part
1: General Requirements (L)
1997 Amd 1 Alarm Systems - Intrusion
Systems Part 1: General Requirements AMD
10080; September 1998; (L)
1998 Alarm Systems - CCTV Surveillance
BS EN 50132-4-1
BS EN 50132-5
BS EN 50133-2-1
BS EN 50133-7
BS EN 50134-3
BS EN 50136-1-2
BS EN 50136-1-3
BS EN 50136-1-4
BS EN 50136-2-2
BS EN 50136-2-3
BS EN 50136-2-4
BS EN 50144-1
Systems for Use in Security Applications
Part 2-1: Black and White Cameras (L)
2001 Alarm Systems - CCTV Surveillance
Systems - Part 4-1: Black and White
Monitors (S)
2001 Alarm Systems - CCTV Surveillance
Systems for Use in Security Applications Part 5: Video Transmission (S)
2000 Alarm Systems - Access Control
Systems for Use in Security Applications Part 2-1: General Requirements for
Components (L)
1999 Alarm Systems - Access Control
Systems for Use in Security Applications Part 7: Application Guidelines (L)
2001 Alarm Systems - Social Alarm Systems
- Part 3: Local Unit and Controller (R)
1998 Alarm Systems - Alarm Transmission
Systems and Equipment - Part 1-2:
Requirements for Systems Using Dedicated
Alarm Paths (L)
1998 Alarm Systems - Alarm Transmission
Systems and Equipment - Part 1-3:
Requirements for Systems with Digital
Communicators Using the Public Switched
Telephone Network (L)
1998 Alarm Systems - Alarm Transmission
Systems and Equipment - Part 1-4:
Requirements for Systems with Voice
Communicators Using the Public Switched
Telephone Network (L)
1998 Alarm Systems - Alarm Transmission
Systems and Equipment - Part 2-2:
Requirements for Equipment Used in
Systems Using Dedicated Alarm Paths (L)
1998 Alarm Systems - Alarm Transmission
Systems and Equipment - Part 2-3:
Requirements for Equipment Used in
Systems with Digital Communicators Using
the Public Switched Telephone Network (L)
1998 Alarm Systems - Alarm Transmission
Systems and Equipment - Part 2-4:
Requirements for Equipment Used in
Systems with Voice Communicators Using
the Public Switched Telephone Network (L)
1999 Safety of Hand-Held Electric Motor
BS EN 50144- 1
BS EN 50144-2-1
BS EN 50144-2-2
BS EN 50144-2-4
BS EN 50144-2-5
BS EN 50144-2-6
BS EN 50144-2-7
BS EN 50144-2-8
BS EN 50144-2-9
BS EN 50144-2-10
BS EN 50144-2-10
BS EN 50144-2-11
BS EN 50144-2-14
Operated Tools - Part 1: General
Requirements Supersedes BS 2769-1: 1984
and Bs 2769-2-2-0: 1984; (F)
1996 Safety of Hand-Held Electric Motor
Operated Tools Part 1: General Requirements
(F)
2000 Safety of Hand-Held Electric Motor
Operated Tools - Part 2-1: Particular
Requirements for Drills (F)
2000 Safety of Hand-Held Electric Motor
Operated Tools - Part 2-2: Particular
Requirements for Screwdrivers and Impact
Wrenches (F)
2000 Safety of Hand-Held Electric Motor
Operated Tools - Part 2-4: Particular
Requirements for Sanders (F)
2000 Safety of Hand-Held Electric Motor
Operated Tools - Part 2-5: Particular
Requirements for Circular Saws and Circular
Knives (F)
2001 Safety of Hand-Held Electric Motor
Operated Tools - Part 2-6: Particular
Requirements for Hammers (F)
2001 Safety of Hand-Held Electric Motor
Operated Tools - Part 2-7: Particular
Requirements for Spray Guns (F)
1996 Safety of Hand-Held Electric Motor
Operated Tools Part 2-8: Particular
Requirements for Sheet Metal Shears and
Nibblers (F)
1996 Safety of Hand-Held Electric Motor
Operated Tools Part 2-9: Particular
Requirements for Tappers (F)
2001 Safety of Hand-Held Electric Motor
Operated Tools - Part 2-10: Particular
Requirements for Jig Saws (F)
2001 Corr 1 Safety of Hand-Held Electric
Motor Operated Tools - Part 2-10: Particular
Requirements for Jig Saws CORR 13295:
August 2001; (F)
1997 Safety of Hand-Held Electric Motor
Operated Tools Part 2-11: Particular
Requirements for Sabre Saws and Double
Blade Reciprocating Saws (F)
2001 Safety of Hand-Held Electric Motor
Operated Tools - Part 2-14: Particular
BS EN 50144-2-15
BS EN 50144-2-15
BS EN 50144-2-17
BS EN 50144-2-18
BS EN 50147-2
BS EN 50149
BS EN 50155
BS EN 50170
BS EN 50171
BS EN 50149
BS EN 50152-3-2
BS EN 50152-3-3
BS EN 50157-1
Requirements for Planers (F)
2001 Safety of Hand-Held Electric Motor
Operated Tools - Part 2-15: Particular
Requirements for Hedge Trimmers (F)
1997 Safety of Hand-Held Electric Motor
Operated Tools Part 2-15: Particular
Requirements for Hedge Trimmers (F)
2000 Safety of Hand-Held Electric Motor
Operated Tools - Part 2-17: Particular
Requirements for Routers Supersedes BS
2769-2.15:1992; (F)
2000 Safety of Hand-Held Electric Motor
Operated Tools - Part 2-18: Particular
Requirements for Laminate Trimmers
Supersedes BS 2769-2.16:1992; (F)
1997 Anechoic Chambers Part 2: Alternative
Test Site Suitability with Respect to Site
Attenuation (F)
2001 Railway Applications - Fixed
Installations - Electric Traction - Copper and
Copper Alloy Grooved Contact Wires (Q)
2001 Railway Applications - Electronic
Equipment Used on Rolling Stock (Q)
1997 General Purpose Field Communication
System (S)
2001 Central Power Supply Systems (R)
2001 Corr 1 Railway Applications - Fixed
Installations - Electric Traction - Copper and
Copper Alloy Grooved Contact Wires CORR
13372: September 14, 2001; Supersedes BS
23:1970; (Q)
2001 Railway Applications - Fixed
Installations - Particular Requirements for
A.C. Switchgear - Part 3-2: Measurement,
Control and Protection Devices for Specific
Use in A.C. Traction Systems - Single-Phase
Current Transformers (Q)
2001 Railway Applications - Fixed
Installations - Particular Requirements for
A.C. Switchgear - Part 3-3: Measurement,
Control and Protection Devices for Specific
Use in A.C. Traction Systems - Single-Phase
Inductive Voltage Transformers (Q)
1999 Domestic and Similar Electronic
Equipment Interconnection Requirements:
AV.Link - Part 1: General (S)
BS EN 50157-2-1
BS EN 50157-2-2
BS EN 50157-2-3
BS EN 50159-1
BS EN 50159-2
BS EN 50164-1
BS EN 50165
BS EN 50165
BS EN 50173
BS EN 50173
BS EN 50201
BS EN 50203
BS EN 50173
BS EN 50174-1
1999 Domestic and Similar Electronic
Equipment Interconnection Requirements:
AV. Link - Part 2-1: Signal Quality Matching
and Automatic Selection of Source Devices
(S)
1999 Domestic and Similar Electronic
Equipment Interconnection Requirements:
AV Link - Part 2-2: Basic System Oriented
Commands (S)
1999 Domestic and Similar Electronic
Equipment Interconnection Requirements:
AV Link - Part 2-3: System Oriented
Application (S)
2001 Railway Applications Communication, Signalling and Processing
Systems - Part 1: Safety-Related
Communication in Closed Transmission
Systems (S)
2001 Railway Applications Communication, Signalling and Processing
Systems - Part 2: Safety Related
Communication in Open Transmission
Systems (S)
2000 Lightning Protection Components
(LPC) - Part 1: Requirements for Connection
Components (R)
1997 Electrical Equipment of Non-Electric
Appliances for Household and Similar
Purposes - Safety Requirements (E)
1997 Amd 1 Electrical Equipment of NonElectric Appliances for Household and
Similar Purposes - Safety Requirements
AMD 13150; September 2001; (E)
1996 Information Technology - Generic
Cabling Systems (S)
1996 Amd 1 Information Technology Generic Cabling Systems AMD 9403
November 1996; (S)
1999 Interfaces for DVB-IRD (S)
1997 Automatic Channel Installation (ACI)
(S)
1996 Amd 2 Information Technology Generic Cabling Systems AMD 10926;
March 2001; (S)
2001 Information Technology - Cabling
Installation - Part 1: Specification and
BS EN 50174-2
BS EN 50176
BS EN 50177
BS EN 50182
BS EN 50183
BS EN 50189
BS EN 50192
BS EN 50193
BS EN 50199
BS EN 50199
BS EN 50200
BS EN 50207
BS EN 50209
BS EN 50212
BS EN 50237
BS EN 50216-6
Quality Assurance (S)
2001 Information Technology - Cabling
Installation - Part 2: Installation Planning and
Practices Inside Buildings (S)
1997 Automatic Electrostatic Spraying
Installations for Flammable Liquid Spraying
Material (F)
1997 Automatic Electrostatic Spraying
Installations for Flammable Coating Powder
(F)
2001 Conductors for Overhead Lines Round Wire Concentric Lay Stranded
Conductors (Q)
2000 Conductors for Overhead Lines Aluminium-Magnesium-Silicon Alloy Wires
Supersedes BS 3242:1970; (Q)
2000 Conductors for Overhead Lines - Zinc
Coated Steel Wires Supersedes BS
4565:1990; (Q)
1996 Arc Welding Equipment - Plasma
Cutting Systems for Manual Use (F)
Superseded by Amendment No. 1 of BS EN
60974-1:1998 Together with BS EN 609747:2000
1997 Closed Electrical Instantaneous Water
Heaters - Methods for Measuring
Performance (L)
1996 Electromagnetic Compatibility (EMC) Product Standard for Arc Welding
Equipment (F)
1996 Amd 1 Electromagnetic Compatibility
(EMC) - Product Standard for Arc Welding
Equipment AMD 9997; May 1998; (F)
2000 Method of Test for Resistance to Fire of
Unprotected Small Cables for Use in
Emergency Circuits (E)
2001 Railway Applications - Electronic
Power Converters for Rolling Stock (Q)
1999 Test of Insulation of Bars and Coils of
High-Voltage Machines Supersedes BS
4999-144: 1987; (F)
1997 Connectors for Thermoelectric Sensors
(F)
2000 Gloves and Mitts with Mechanical
Protection for Electrical Purposes (N)
2002 Power Transformer and Reactor
BS EN 50221
BS EN 50225
BS EN 50242
BS EN 50248
BS EN 50254
BS EN 50242
BS EN 50242
BS EN 50242
BS EN 50244
BS EN 50244
BS EN 50254
BS EN 50255
BS EN 50262
Fittings - Part 6: Cooling Equipment Removable Radiators for Oil-Immersed
Transformers (E)
1997 Common Interface Specification for
Conditional Access and Other Digital Video
Broadcasting Decoder Applications (S)
1997 Code of Practice for the Safe Use of
Fully Enclosed Oil-Filled Electrical
Equipment Which May be Contaminated
with PCBs (E)
1999 Electric Dishwashers for Household
Use - Test Methods for Measuring the
Performance (L)
2001 Characteristics of DAB Receivers (S)
1999 High Efficiency Communication
Subsystem for Small Data Packages (S)
1999 Amd 1 Electric Dishwashers for
Household Use - Test Methods for
Measuring the Performance AMD 10593;
August 1999 (L)
1999 Amd 2 Electric Dishwashers for
Household Use - Test Methods for
Measuring the Performance AMD 13169:
June 2001; (L)
1999 Amd 1 and Corr 1 Electric Dishwashers
for Household Use - Test Methods for
Measuring the Performance AMD 10593;
August 1999; CORR 10950; September
2000; (L)
2000 Electrical Apparatus for the Detection
of Combustible Gases in Domestic Premises
- Guide on the Selection, Installation, Use
and Maintenance (L)
2000 Corr 1 Electrical Apparatus for the
Detection of Combustible Gases in Domestic
Premises - Guide on the Selection,
Installation, Use and Maintenance CORR
12036; October 2000; Incorporating
Corrigendum No. 1; (L)
1999 Amd 1 High Efficiency Communication
Subsystem for Small Data Packages AMD
10773; October 1999; (S)
1998 Digital Audio Broadcasting System Specification of the Receiver Data Interface
(RDI) (S)
1999 Metric Cable Glands for Electrical
BS EN 50263
BS EN 50265-1
BS EN 50265-2-1
BS EN 50290-1-1
BS EN 50321
BS EN 60086-1
BS EN 50265-2-2
BS EN 50266-1
BS EN 50290-2-25
BS EN 50291
BS EN 50292
Installations Partially Replaces BS 6121-1:
1989; (E)
2000 Electromagnetic Compatibility (EMC) Product Standard for Measuring Relays and
Protection Equipment (S)
1999 Common Test Methods for Cables
Under Fire Conditions - Test for Resistance
to Vertical Flame Propagation for a Single
Insulated Conductor or Cable - Part 1:
Apparatus When Used in Conjunction with
BS EN 50265-2-1 and BS EN 50265-2-2, it
Supersedes BS
1999 Common Test Methods for Cables
Under Fire Conditions - Test for Resistance
to Vertical Flame Propagation for a Single
Insulated Conductor or Cable - Part 2-1:
Procedures - 1 kW Pre-Mixed Flame
Supersedes BS 4066-1: 1980; (E)
2001 Communication Cables - Part 1-1:
General (S)
2000 Electrically Insulating Footwear for
Working on Low Voltage Installations (N)
2001 Primary Batteries - Part 1: General (E)
1999 Common Test Methods for Cables
Under Fire Conditions - Test for Resistance
to Vertical Flame Propagation for a Single
Insulated Conductor or Cable - Part 2-2:
Procedures - Diffusion Flame Supersedes BS
4066-2: 1989; (E)
2001 Common Test Methods for Cables
under Fire Conditions - Test for Vertical
Flame Spread of Vertically-Mounted
Bunched Wires or Cables - Part 1: Apparatus
Together with BS EN 50266-2-1 Thru BS EN
502-2-5:2001 Supersedes BS 4066-3:1994;
(E)
2002 Communication Cables - Part 2-25:
Common Design Rules and Construction Polypropylene Insulation Compounds
Supersedes BS 7878-5:1997; (S)
2001 Electrical Apparatus for the Detection
of Carbon Monoxide in Domestic Premises Test Methods and Performance Requirements
Supersedes BS 7860:1996; (L)
2002 Electrical Apparatus for the Detection
of Carbon Monoxide in Domestic Premises -
BS EN 50290-2-30
BS EN 50293
BS EN 50295
BS EN 50303
BS EN 50304
BS EN 60061-2
BS EN 60061-2
BS EN 60061-2
BS EN 60061-2
BS EN 60061-2
BS EN 60061-3
Guide on the Selection, Installation, Use and
Maintenence (L)
2002 Communication Cables - Part 2-30:
Common Design Rules and Construction Poly(TetrafluoroethyleneHexafluoropropylene)(FEP) Insulation and
Sheathing (S)
2001 Electromagnetic Compatibility - Road
Traffic Signal Systems - Product Standard
(S)
1999 Low-Voltage Switchgear and
Controlgear - Controller and Device Interface
Systems - Actuator Sensor Interface (AS-i)
(E)
2000 Group I, Category M1 Equipment
Intended to Remain Functional in
Atmospheres Endangered by Firedamp
and/or Coal Dust (Q)
2001 Electric Ovens for Household Use Methods for Measuring Energy Consumption
(L)
1997 Lamp Caps and Holders Together with
Gauges for the Control of Interchangeability
and Safety Part 2: Lampholders (E)
1997 Amd 1 Lamp Caps and Holders
Together with Gauges for the Control of
Interchangeability and Safety Part 2:
Lampholders AMD 9695; November, 1997;
(E)
1997 Amd 2 Lamp Caps and Holders
Together with Gauges for the Control of
Interchangeability and Safety Part 2:
Lampholders AMD 10187; February, 1999;
(E)
1997 Amd 3 Lamp Caps and Holders
Together with Gauges for the Control of
Interchangeability and Safety Part 2:
Lampholders AMD 10582; December, 1999;
(E)
1997 Amd 4 Lamp Caps and Holders
Together with Gauges for the Control of
Interchangeability and Safety Part 2:
Lampholders AMD 11009; July 2001; (E)
1997 Lamp Caps and Holders Together with
Gauges for the Control of Interchangeability
and Safety Part 3: Gauges (E)
BS EN 60269-3
BS EN 60270
BS EN 60276
BS EN 60317-28
BS EN 60317-29
BS EN 60317-29
BS EN 60598-2-8
BS EN 60598-2-8
BS EN 60598-2-20
BS EN 60763-1
1995 Low-Voltage Fuses Part 3:
Supplementary Requirements for Fuses for
Use by Unskilled Persons (Fuses Mainly for
Household and Similar Applications) (IEC
269-3: 1987) (E)
2001 High-Voltage Test Techniques - Partial
Discharge Measurements IEC 60270:2000;
(E)
1996 Amd 2 Definitions and Nomenclature
for Carbon Brushes, Brush-Holders,
Commutators and Slip-Rings AMD 9192;
November 15, 1996; IEC 276: 1968;
Supersedes Appendix A of BS 4362: Section
A1: 1968 (F)
1997 Amd 1 Specifications for Particular
Types of Winding Wires Part 28:
Polyesterimide Enamelled Rectangular
Copper Wire, Class 180 AMD 10331; May
1999; Renumbers BS 6811 SEC 4.3: 1991;
IEC 60317-28: 1990; (E)
1997 Particular Types of Winding Wires Part
29: Polyester or Polyesterimide Overcoated
with Polyamide-Imide Enamelled
Rectangular Copper Wire, Class 200 IEC
317-29: 1990; Renumbers BS 6811: SEC 4.2:
1991; (E)
1997 Amd 1 Specifications for Particular
Types of Winding Wires Part 29: Polyester or
Polyesterimide Overcoated with PolyamideImide Enamelled Rectangular Copper Wire,
Class 200 AMD 10378; May 1999;
Renumbers BS 6811: SEC 4.2: 1991; IEC
60317-29: 1990; (E
1997 Luminaires Part 2: Particular
Requirements Section 2.8: Handlamps
Supersedes BS 4533: Part 102: Section
102.8: 1990; (F)
1997 And 1 Luminaires - Part 2: Particular
Requirements - Section 8: Handlamps AMD
12030:May 2001; Supersedes BS 4533102.8:1990; (F)
1998 Luminaires Part 2: Particular
Requirements Section 2.20: Lighting Chains
(F)
1996 Specification for Laminated Pressboard
Part 1: Definitions, Classification and
BS EN 60317-30
BS EN 60317-30
BS EN 60317-31
BS EN 60317-31
BS EN 60317-32
BS EN 60317-32
BS EN 60317-33
BS EN 60317-33
General Requirements (IEC 763-1: 1983) (E)
1997 Particular Types of Winding Wires Part
30: Polyimide Enamelled Rectangular
Copper Wire, Class 220 IEC 317-30: 1990;
(Renumbers BS 6811: SEC 4.7: 1993; E)
1997 Amd 1 Specifications for Particular
Types of Winding Wires Part 30: Polyimide
Enamelled Rectangular Copper Wire, Class
220 AMD 10386; May 1999; Renumbers BS
6811: SEC 4.7: 1993; IEC 60317-30: 1990;
(E)
1997 Particular Types of Winding Wires Part
31: Glass-Fibre Wound, Polyester or
Polyesterimide Varnish-Treated, Bare or
Enamelled Rectangular Copper Wire,
Temperature Index 180 Renumbers BS 6811:
Section 6.1: 1993; IEC 317-31: 1990; (E)
1997 Amd 1 Specifications for Particular
Types of Winding Wires Part 31: Glass-Fibre
Wound Resin or Varnish Impregnated, Bare
or Enamelled Rectangular Copper Wire,
Temperature Index 180 AMD 10332; May
1999; Renumbers BS 6811: Section 6.1:
1993; IEC 603171997 Particular Types of Winding Wires Part
32: Glass-Fibre Wound, Polyester or
Polyesterimide Varnish-Treated, Bare or
Enamelled Rectangular Copper Wire,
Temperature Index 155 IEC 317-32: 1990;
Renumbers BS 6811: Section 6.2: 1993; (E)
1997 Amd 1 Specifications for Particular
Types of Winding Wires Part 32: Glass-Fibre
Wound Resin or Varnish Impregnated, Bare
or Enamelled Rectangular Copper Wire,
Temperature Index 155 AMD 10333; May
1999; Renumbers BS 6811: Section 6.2:
1993; IEC 603171997 Particular Types of Winding Wires Part
33: Glass-Fibre Wound, Silicone VarnishTreated, Bare or Enamelled Rectangular
Copper Wire, Temperature Index 200 IEC
317-33: 1990; Renumbers BS 6811: Section
6.3: 1993; (E)
1997 Amd 1 Specifications for Particular
Types of Winding Wires Part 33: Glass-Fibre
Wound Resin or Varnish Impregnated, Bare
BS EN 60756
BS EN 60763-2
BS EN 60770-1
BS EN 60774-1
BS EN 60774-2
BS EN 60774-3
BS EN 60794-1-2
BS EN ISO 105-C07
BS EN ISO 105-E01
BS EN ISO 105-E02
BS EN ISO 105-E03
BS EN ISO 105-E04
BS EN ISO 105-E05
or Enamelled Rectangular Copper Wire,
Temperature Index 200 AMD 10334; May
1999; Renumbers BS 6811: Section 6.3:
1993; IEC 603171993 Amd 1 Non-Broadcast Video Tape
Recorders - Time Base Stability (IEC 756:
1991) (AMD 7736) April 15, 1993 (Formerly
BS 6411: 1991 Replaces BS 6411: 1983) (S)
1996 Laminated Pressboard Part 2: Methods
of Test (IEC 763-2: 1991) (E)
1999 Transmitters for Use in IndustrialProcess Control Systems - Part 1: Methods
for Performance Evaluation Supersedes BS
4509: 1985; IEC 60770-1: 1999; (Q)
1994 Helical-Scan Video Tape Cassette
System Using 12.65 mm (0.5 in) Magnetic
Tape on Type VHS Part 1: VHS and
Compact VHS Video Cassette System (IEC
774-1: 1994) (Replaces BS 6482: 1984) (S)
2000 Helical-Scan Video Tape Cassette
System Using 12,65 mm (0,5 in) Magnetic
Tape on Type VHS - PART 2:FM Audio
Recording Supersedes BS EN 61054:1993;
IEC 60774-2:1999; (S)
1994 Helical-Scan Video Tape Cassette
System Using 12.65 mm (0.5 in) Magnetic
Tape on Type VHS Part 3: S-VHS (IEC 7743: 1993) (S)
1999 Optical Fibre Cables - Part 1-2: Generic
Specification - Basic Optical Cable Test
Procedures IEC 60794-1-2:1999; (S)
2001 Textiles - Tests for Colour Fastness Part C07: Colour Fastness to Wet Scrubbing
of Pigment Printed Textiles (L)
1996 Textiles - Tests for Colour Fastness Part
E01: Colour Fastness to Water (L)
1996 Textiles - Tests for Colour Fastness Part
E02: Colour Fastness to Sea Water (L)
1997 Textiles - Tests for Colour Fastness Part
E03: Colour Fastness to Chlorinated Water
(Swimming-Pool Water) (L)
1996 Textiles - Tests for Colour Fastness Part
E04: Colour Fastness to Perspiration (L)
1997 Textiles - Tests for Colour Fastness Part
E05: Colour Fastness to Spotting: Acid
Supersedes the Corresponding Method in BS
BS EN ISO 105-E06
BS EN ISO 105-E07
BS EN ISO 105-E08
BS EN ISO 105-E09
BS EN 41003
BS EN 41003
BS EN 45010
BS EN 45011
BS EN 45012
BS EN 45014
BS EN ISO 7094
BS EN 50015
BS EN 927-5
BS EN 930
1006: 1990 Which is Withdrawn by
Amendment; (L)
1997 Textiles - Tests for Colour Fastness Part
E06: Colour Fastness to Spotting: Alkali
Supersedes the Relevant Method in BS 1006:
1990 Which is Withdrawn by Amendment;
(L)
1997 Textiles - Tests for Colour Fastness Part
E07: Colour Fastness to Spotting: Water
Supersedes the Relevant Method in BS 1006:
1990 Which is Withdrawn by Amendment;
(L)
1997 Textiles Tests for Colour Fastness Part
E08: Colour Fastness to Hot Water (L)
1997 Textiles - Tests for Colour Fastness Part
E09: Colour Fastness to Potting Supersedes
the Relevant Method in BS 1006: 1990
Which is Withdrawn by Amendment; (L)
1999 Particular Safety Requirements for
Equipment to Be Connected to
Telecommunications Networks (S)
1991 Particular Safety Requirements for
Equipment to Be Connected to
Telecommunication Networks
1998 General Requirements for Assessment
and Accreditation of Certification Systems
(G)
1998 General Requirements for Bodies
Operating Product Certification Systems
Revision of BS 7511: 1989; (H)
1998 General Requirements for Bodies
Operating Assessment and
Certification/Registration of Quality Systems
Revision of BS 7512:1989 (G)
1998 General Criteria for Supplier's
Declaration of Conformity Supersedes BS
7514: 1989; (G)
2000 Plain Washers - Extra Large Series Product Grade C (E)
1998 Electrical Apparatus for Potentially
Explosive Atmospheres - Oil Immersion
2000 Paints and Varnishes - Coating
Materials and Coating Systems for Exterior
Wood - Part 5: Assessment of the Liquid
Water Permeability (W)
1997 Footware, Leather and Imitation
BS EN 931
BS EN 932-1
BS EN 932-2
BS EN 932-5
BS EN 932-6
BS EN 933-2
BS EN 933-3
BS EN 933-1
BS EN 933-4
BS EN 747-2
BS EN 747-2
BS EN 751-1
BS EN 751-2
Leather Goods Manufacturing Machines Roughing, Scouring, Polishing and Trimming
Machines - Safety Requirements (F)
1998 Footwear Manufacturing Machines Lasting Machines - Safety Requirements (F)
1997 Tests for General Properties of
Aggregates Part 1: Methods for Sampling (R)
1999 Tests for General Properties of
Aggregates - Part 2: Methods for Reducing
Laboratory Samples (R)
2000 Tests for General Properties of
Aggregates - Part 5: Common Equipment and
Calibration (R)
1999 Tests for General Properties of
Aggregates - Part 6: Definitions of
Repeatability and Reproducibility Supersedes
BS 812-101: 1984; (R)
1996 Tests for Geometrical Properties of
Aggregates Part 2: Determination of Particle
Size Distribution - Test Sieves, Nominal Size
of Apertures (R)
1997 Tests for Geometrical Properties of
Aggregates Part 3: Determination of Particle
Shape - Flakiness Index (R)
1997 Tests for Geometrical Properties of
Aggregates Part 1: Determination of Particle
Size Distribution - Sieving Method
Supersedes BS 812: Part 103: Section 103.1:
1985; (R)
2000 Tests for Geometrical Properties of
Aggregates - Part 4: Determination of
Particle Shape - Shape Index (R)
1993 Furniture - Bunk Beds for Domestic
Use Part 2: Test Methods (Supersedes BS
6998: 1988) (L)
1993 Amd 1 Furniture - Bunk Beds for
Domestic Use Part 2: Test Methods
(Supersedes BS 6998: 1988) (L)
1997 Sealing Materials for Metallic Threaded
Joints in Contact with 1st, 2nd and 3rd
Family Gases and Hot Water Part 1:
Anaerobic Jointing Compounds Supersedes
BS 6956: Part 7: 1992; (E)
1997 Sealing Materials for Metallic Threaded
Joints in Contact with 1st, 2nd and 3rd
Family Gases and Hot Water Part 2: Non-
BS EN 751-3
BS EN 753-1
BS EN 753-2
BS EN 753-3
BS EN 754-1
BS EN 754-2
BS EN 754-3
BS EN 3696
BS EN 3475-405
BS EN 3475-406
BS EN 3475-407
BS EN 3475-409
BS EN 3475-410
BS EN 3475-501
BS EN 3475-502
BS EN 3475-503
Hardening Jointing Compounds Supersedes
BS 6956: Part 6: 1992; (E)
1997 Sealing Materials for Metallic Threaded
Joints in Contact with 1st, 2nd and 3rd
Family Gases and Hot Water Part 3:
Unsintered PTFE Tapes Supersedes BS 6974:
1991; (E)
1997 Identification Card Systems Intersector Thin Flexible Cards Part 1:
General Technical Specifications (S)
1997 Identification Card Systems Intersector Thin Flexible Cards Part 2:
Magnetic Recording Technique (S)
1999 Identification Card Systems Intersector Thin Flexible Cards - Part 3: Test
Methods (S)
1997 Aluminium and Aluminium Alloys Cold Drawn Rod/Bar and Tube Part 1:
Technical Conditions for Inspection and
Delivery (V)
1997 Aluminium and Aluminium Alloys Cold Drawn Rod/Bar and Tube Part 2:
Mechanical Properties (V)
1996 Aluminium and Aluminium Alloys Cold Drawn Rod/Bar and Tube Part 3: Round
Bars, Tolerances on Dimensions and Form
(V)
2001 Washers in Heat Resisting Steel (S)
2002 Cables, Electrical, Aircraft Use - Test
Methods - Part 405: Bending at Ambient
Temperature (S)
2002 Cables, Electrical, Aircraft Use - Test
Methods - Part 406: Cold Bend test (S)
2002 Cables, Electrical, Aircraft Use - Test
Methods - Part 407: Flammability (S)
2002 Cables, Electrical, Aircraft Use - Test
Methods - Part 409: Air-Excluded Ageing (S)
2002 Cables, Electrical, Aircraft Use - Test
Methods - Part 410: Thermal Endurance (S)
2002 Cables, Electrical, Aircraft Use - Test
Methods - Part 501: Dynamic Out-Through
(S)
2002 Cables, Selectrical, Aircraft Use - Test
Methods - Part 502: Notch Propagation (S)
2002 Cables, Electrical, Aircraft Use - Test
Methods - Part 503: Scrape Abrasion (S)
BS EN 3475-504
BS EN 3475-505
BS EN 3475-506
BS EN 3475-507
BS EN 3475-701
BS EN 3475-702
BS EN 3475-703
BS EN 3506
BS EN 3561
BS EN 3566
BS EN 3663
BS EN 3688
BS EN 3689
BS EN 3690
BS EN 3691
BS EN 3788
BS EN 3790
2002 Cables, Electrical, Aircraft Use - Test
Methods - Part 504: Torsion (S)
2002 Cables, Electrical, Aircraft Use - Test
Methods - Part 505: Tensile Test on
Conductors andd Strands (S)
2002 Cables, Electrical, Aircraft Use - Test
Methods - Part 506: Plating Continuity (S)
2002 Cables, Electrical, Aircraft Use - Test
Methods - Part 507: Adherence of Plating (S)
2002 Cables, Electrical, Aircraft Use - Test
Methods - Part 701: Strippability and
Adherence of Insulation to the Conductor (S)
2002 Cables, Electrical, Aircraft Use - Test
Methods - Part 702: Screen Pushback
Capability (S)
2002 Cables, Electrical, Aircraft Use - Test
Methods - Part 703: Permanence of
Manufacturer's Marking (S)
2001 Hot Rolled Sheets and Plates in Heat
Resisting Alloys - Thickness 2,0 mm Less
Than or Equal to A Less Than or Equal to
100 mm - Dimensions (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Ferrules with Dynamic
Beam Seal End, Welded and Reduced at Pipe
End (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Adaptors with Lockring (S)
2001 Pipe Coupling - O-Rings in Rubber
NBR, 75 IRHD, Temperature Range: -55
Degrees C to +135 Degrees C (S)
2001 T-Ring Fillers in Titanium Alloy for
Welding Pipes - 14 000 kPa Nominal
Pressure (S)
2001 T-Ring Fillers in Titanium Alloy for
Welding Pipes - 28 000 kPa Nominal
Pressure (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Unions, Bulkhead, Long (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Unions, Bulkhead, Long
Welded (S)
2001 Pipe Coupling 8 Degrees 30' Protective Caps (S)
2001 Pipe Coupling 8 Degrees 30' Protective Caps with Internal Threads (S)
BS EN 3730
BS EN 3893
BS EN 3789
BS EN 3842
BS EN 3848
BS EN 3882
BS EN 3883
BS EN 3884
BS EN 3885
BS EN 3886
BS EN 3887
BS EN 3888
BS EN 3892
BS EN 3894
BS EN 3895
BS EN 4017
2001 Clamps, Saddle Fixed and Sliding
Version in Aluminium Alloy with Rubber
Cushioning - Dimensions, Masses (S)
2001 Titanium Alloy TI-W19001 - Filler
Metal for Welding (S)
2001 Pipe Coupling 8 Degrees 30' Protective Plugs with External Threads (S)
2001 Circular Tubes for Fluids in Corrosion
Resistant Steel - Diameter 3,2 mm Less Than
or Equal to D Less Than or Equal to 100 mm
- Thickness 0,32 mm Less Than or Equal to a
Less Than or Equal to 2,5 mm - Dimensions
(S)
2001 Semi-Finished Metallic Products Methods of Measuring Form Deviations (S)
2001 Aerospace Series - Heat Resisting
Alloy NI-WH1801 (NiCr20Co18Ti3A12) Filler Metal for Welding (S)
2001 Aerospace Series - Heat Resisting
Alloy NI-WH2301 (NiCr22Fe19Mo9Co2) Filler Metal for Welding (S)
2001 Aerospace Series - Heat Resisting
Alloy NI-WH2601 (NiCr19Nb5Mo3Ti) Filler Metal for Welding (S)
2001 Aerospace Series - Heat Resisting
Alloy NI-WH3601 (NiCr22Mo9Nb4) - Filler
Metal for Welding (S)
2001 Heat Resisting Alloy NI-WH1303
(NiCo20Cr20Mo5Ti2Al) - Filler Metal for
Welding (S)
2001 Heat Resisting Alloy CO-WH4101
(CoCr20W15Ni) - Filler Metal for Welding
(S)
2001 Heat Resisting Alloy COWH1402(CoCr22Ni22W15) - Filler Metal
for Welding (S)
2001 Aerospace Series - Titanium Alloy - TIW64001 - Filler Metal for Welding (S)
2001 Aerospace Series - Heat Resisting
Alloy NI-WD3201 (NiMo25Fe6Cr5) - Filler
Metal for Welding (S)
2001 Aerospace Series - Heat Resisting
Alloy NI-WH3901 (NiCr16Mo15) - Filler
Metal for Welding (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Elbows 90 Degrees (S)
BS EN 4023
BS EN 4026
BS EN 3920
BS EN 3921
BS EN 3923
BS EN 3925
BS EN 3926
BS EN 3927
BS EN 3930
BS EN 3932
BS EN 3933
BS EN 4032
BS EN 4182
BS EN 4186
BS EN 3934
BS EN 3935
BS EN 3936
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Elbows 45 Degree (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Tees (S)
2001 Aerospace Series - Nickel Base Alloy
NI - B41202 (NiCr14Fe5Si5B3) - Filler
Metal for Brazing - Powder or Paste (S)
2001 Aerospace Series - Nickel Base Alloy
NI - B41203 (NiCr7Si5B3) - Filler Metal for
Brazing - Amorphous Foil (S)
2001 Aerospace Series - Nickel Base Alloy
NI - B41203 (NiCr7Si5B3Fe3) - Filler Metal
for Brazing - Powder or Paste (S)
2001 Aerospace Series - Nickel Base Alloy
NI-B40001 (NiSi5B3) - Filler Metal for
Brazing - Amorphous Foil (S)
2001 Aerospace Series - Nickel Base Alloy
NI-B40001 (NiSi5B3) - Filler Metal for
Brazing - Broided Foil (S)
2001 Aerospace Series - Nickel Base Alloy
NI-B40001 (NiSi5B3) - Filler Metal for
Brazing - Powder or Paste (S)
2001 Aerospace Series - Nickel Base Alloy
NI-B31001 (NiCr19Si10) - Filler Metal for
Brazing - Powder or Paste (S)
2001 Aerospace Series - Nickel Base Alloy
NI-B13001 (NiP11) - Filler Metal for
Brazing - Amorphous Foil (S)
2001 Aerospace Series - Nickel Base Alloy
NI-B13001 (NiP11) - Filler Metal for
Brazing - Powder or Paste (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Thrust Wire (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Tees, Reduced (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Unions, Cross (S)
2001 Aerospace Series - Nickel Base Alloy
NI - B21001 (NiCr15B4) - Filler Metal for
Brazing - Amorphous Foil (S)
2001 Aerospace Series - Nickel Base Alloy
NI-B21001 (NiCr15B4) - Filler Metal for
Brazing - Borided Foil (S)
2001 Aerospace Series - Nickel Base Alloy
NI-B21001 (NiCr15B4) - Filler Metal for
Brazing - Powder or Paste (S)
BS EN 3937
BS EN 3938
BS EN 3939
BS EN 3941
BS EN 3942
BS EN 3943
BS EN 3945
BS EN 3946
BS EN 3952
BS EN 3953
BS EN 3954
BS EN 3955
BS EN 3956
BS EN 3957
BS EN 3958
BS EN 3959
2001 Aerospace Series - Nickel Base Alloy
NI-B44101 (NiW12Cr10Si4Fe3B3) - Filler
Metal for Brazing - Powder or Paste (S)
2001 Aerospace Series - Nickel Base Alloy
NI-B46001 (NiCo20Si5B3) - Filler Metal for
Brazing - Amorphous Foil (S)
2001 Aerospace Series - Nickel Base Alloy
NI-B46001 (NiCo20Si5B3) - Filler Metal for
Brazing - Powder or Paste (S)
2001 Aerospace Series - Nickel Base Alloy
NI-B41204 (NiCr13Si4B3) - Filler Metal for
Brazing - Amorphous Foil (S)
2001 Aerospace Series - Nickel Base Alloy
NI-B41204 (NiCr13Si4B3) - Filler Metal for
Brazing - Borided Foil (S)
2001 Aerospace Series - Nickel Base Alloy
NI-B41204 (NiCr13Fe4Si4B3) - Filler Metal
for Brazing - Powder or Paste (S)
2001 Aerospace Series - Nickel Base Alloy
NI-B48801 (NiMn19Si6Cu4B) - Filler Metal
for Brazing - Powder or Paste (S)
2001 Aerospace Series - Nickel Base Alloy
NI-B15701 (NiPd34Au30) - Filler Metal for
Brazing - Powder or Paste (S)
2001 Aerospace Series - Silver Base Alloy
AG-B10001 (AgCu28) - Filler Metal for
Brazing - Wire (S)
2001 Aerospace Series - Silver Base Alloy
AG-B12401 (AgCu40Zn5Ni) - Filler Metal
for Brazing - Wire (S)
2001 Aerospace Series - Silver Base Alloy
AG-B12401 (AgCu40Zn5Ni) - Filler Metal
for Brazing - Powder or Paste (S)
2001 Aerospace Series - Silver Base Alloy
AG-B12401 (AgCu40Zn5Ni) - Filler Metal
for Brazing - Rolled Foil (S)
2001 Aerospace Series - Silver Base Alloy
AG-B14001 (AgCu42Ni2) - Filler Metal for
Brazing - Wire (S)
2001 Aerospace Series - Silver Base Alloy
AG-B14001 (AgCu42Ni2) - Filler Metal for
Brazing - Powder or Paste (S)
2001 Aerospace Series - Silver Base Alloy
AG-B14001 (AgCu42Ni2) - Filler Metal for
Brazing - Rolled Foil (S)
2001 Aerospace Series - Cobalt Base Alloy
BS EN 3960
BS EN 3961
BS EN 3962
BS EN 3963
BS EN 3964
BS EN 3965
BS EN 4018
BS EN 4019
BS EN 4020
BS EN 4021
BS EN 4022
BS EN 4024
BS EN 4025
BS EN 4027
BS EN 4029
BS EN 4030
CO-B41601 (CoCr19Ni17Si8W4) - Filler
Metal for Brazing - Powder or Paste (S)
2001 Aerospace Series - Gold Base Alloy
AU-B40001 (AuNi18) - Filler Metal for
Brazing - Powder or Paste (S)
2001 Aerospace Series - Gold Base Alloy
AU-B40001 - Filler Metal for Brazing Rolled Foil (S)
2001 Aerospace Series - Gold Base Alloy
AU-B40001 - Filler Metal for Brazing - Wire
(S)
2001 Aerospace Series - Copper CU-BU9001
- Filler Metal for Brazing - Rolled Foil (S)
2001 Aerospace Series - Copper CU-BU9001
- Filler Metal for Brazing - Wire (S)
2001 Aerospace Series - Titanium Alloy TIB17001 - Filler Metal for Brazing - Rolled
Foil (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Elbows 90 Degrees with
Thrust Wire Nut (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Elbows 90 Degrees Welded
End (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Elbows 90 Degree, Welded
End with Thrust Wire Nut (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Elbows 90 Degree,
Bulkhead (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Elbows 90 Degree,
Bulkhead, Welded End (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Elbows 45 Degree Welded
End with Thrust Wire Nut (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Elbows 45 Degree,
Bulkhead (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Tees Branch with Thrust
Wire Nut (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Tees Bulkhead Branch (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Tees Bulkhead on Run (S)
BS EN 4031
BS EN 4045
BS EN 4113
BS EN 4114
BS EN 4115
BS EN 4179
BS EN 4058
BS EN 4059
BS EN 4060
BS EN 4085
BS EN 4103
BS EN 4104
BS EN 4183
BS EN 4184
BS EN 4185
BS EN 4187
BS EN 4188
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Nut for Welded Ferrule (S)
2001 Capillary Tubes, Seamless in Heat
Resisting Alloys - Diameter 0,6 mm Less
Than or Equal to D Less Than or Equal to 2
mm - Dimensions (S)
2001 Clamps, Loop (
2001 Clamps, Loop (
2001 Cushion, Rubber for Clamps Dimensions, Masses (S)
2000 Qualification and Approval of
Personnel for Non-Destructive Testing (S)
2001 Filler Rods and Filler Wires for
Welding in Titanium and Titanium Alloys Diameter 0,5 mm Less Than or Equal to D
Less Than or Equal to 5,0 mm - Dimensions
(S)
2001 Aerospace Series - Filler Rods and
Filler Wires for Welding in Steel - Diameter
0,5 mm Greater Than or Equal to D Greater
Than or Equal to 5,0 mm - Dimensions (S)
2001 Filler Rods and Filler Wires for
Welding in Heat Resisting Alloys - Diameter
0,5 mm Less Than or Equal to D Less Than
or Equal to 5,0 mm - Dimensions (S)
2001 Aerospace Series - Nickel Base Alloy
NI-B40002 (NiSi4B2) - Filler Metal for
Brazing - Amorphous Foil (S)
2001 Aerospace Series - Nickel Base Alloy
NI-B40002 (NiSi4B2) - Filler Metal for
Brazing - Borided Foil (S)
2001 Nickel Base Alloy NI-B40002 - Filler
Metal for Brazing - Powder or Paste (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Elbows 90 Degree Welded
Ends (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Elbows 45 Degree Double,
Welded Ends (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Tees Bulkhead on Run
Long (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Elbows 90 Degree
Bulkhead, Long (S)
2001 Pipe Coupling 8 Degrees 30' in
BS EN 4189
BS EN 4324
BS EN 4343
BS EN 4190
BS EN 4191
BS EN 4192
BS EN 4193
BS EN 4194
BS EN 4233
BS EN 4250
BS EN 4267
BS EN 4325
BS EN 4326
BS EN 4327
BS EN 4328
BS EN 4329
Titanium Alloy - Elbows 90 Degree
Bulkhead, Long, Welded End (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Tees, Bulkhead Branch
Long (S)
2001 Aluminium Alloy AL-W42201 - Filler
Metal for Welding - Rod (S)
2002 Steel FE-WM1001 (X13Cr12) - Filler
Metal for Welding - Wire and Rod (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Tees, Reduced with Thrust
Wire Nut on Run (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Tees, Reduced, Bulkhead
Branch, Long (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Tees, Reduced Bulkhead
Branch (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Tees, Reduced Bulkhead on
Run Long (S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Tees, Reduced, Bulkhead
(S)
2001 Pipe Coupling 8 Degrees 30' in
Titanium Alloy - Unions, Welded, Threaded
(S)
2001 Aerospace Series - Nickel Base Alloys
NI-B41001 (NiCr19Si7B) - Filler Metal for
Brazing Amorphous Foil (S)
2001 Round Bars in Titanium and Titanium
Alloys - Diameter 6 mm Less Than or Equal
to D Less Than or Equal to 160 mm Dimensions (S)
2001 Aerospace Series - Heat Resisting
Alloy NI-WH1302 (NiCr20Co13Mo4Ti3Al)
- Filler Metal for Welding - Wire and Rod (S)
2001 Aerospace Series - Heat Resisting
Alloy CO-WH4102 (CoCr28W20Ni5V1) Filler Metal for Welding - Wire and Rod (S)
2001 Aerospace Series - Heat Resisting
Alloy CO-WH1401 (CoCr26Ni11W8) Filler Metal for Welding - Wire and Rod (S)
2002 Steel FE-WM1601 (X18CrWni13-3-2)
- Filler Metal for Welding - Wire and Rod (S)
2001 Aerospace Series - Heat Resisting
BS EN 4330
BS EN 4331
BS EN 4332
BS EN 4333
BS EN 4334
BS EN 4335
BS EN 4336
BS EN 4337
BS EN 4338
BS EN 4339
BS EN 4340
BS EN 4341
BS EN 4342
BS EN 4344
BS EN 536
BS EN 847-2
BS EN 848-1
Alloy NI-WH0001 (NiCr20) - Filler Metal
for Welding - Wire and Rod (S)
2002 Steel FE-WA4802 (X8CrNiMn27-22-2)
- Filler Metal for Welding - Wire and Rod (S)
2002 Steel FE-WL1804 (25CrMnMo4-2-2) Filler Metal for Welding - Wire and Rod (S)
2002 Steel FE-WL1805 (8CrMnMo12-4-9) Filler Metal for Welding - Wire and Rod (S)
2002 Steel FE-WA4902
(X5CrNiCoMoWMn21-20-20-3-3-2) - Filler
Metal for Welding - Wire and Rod (S)
2002 Steel FE-WL1806 (15CrMnMoV5-4-93) - Filler Metal for Welding - Wire and Rod
(S)
2002 Steel FE-WA2602 (X4NiCrTiMoV2615) - Filler Metal for Welding - Wire and
Rod (S)
2002 Steel FE-WA3801 (X4CrNiMn20-10-2)
- Filler Metal for Welding - Wire and Rod (S)
2001 Aerospace Series - Heat Resisting
Alloy NI-WH8901 (NiCr16Ti3Mn2) - Filler
Metal for Welding - Wire and Rod (S)
2001 Aerospace Series - Heat Resisting
Alloy NI-WH3902 (NiCr25Mo10C) - Filler
Metal for Welding - Wire and Rod (S)
2001 Aerospace Series - Heat Resisting
Alloy CO-WH4001 (CoCr29W9) - Filler
Metal for Welding - Wire and Rod (S)
2002 Magnesium Alloy MG - W68001 Filler Metal for Welding - Wire and Rod (S)
2001 Aerospace Series - Aluminium Alloy
AL-W46431 - Filler Metal for Welding Wire and Rod (S)
2001 Aerospace Series - Titanium TIW99001 - Filler Metal for Welding - Wire
and Rod (S)
2001 Aerospace Series - Steel FE-WM1002
(X13Cr13) - Filler Metal for Welding - Wire
and Rod (S)
1999 Road Construction Machines - Asphalt
Mixing Plants - Safety Requirements (R)
2001 Tools for Woodworking - Safety
Requirements - Part 2: Requirements for the
Shank of Shank-Mounted Milling Tools (F)
1999 Safety of Woodworking Machines One Side Moulding Machines with Rotating
BS EN 848-1
BS EN 848-2
BS EN 848-3
BS EN 850
BS EN 850
BS EN 851
BS EN 853
BS EN 854
BS EN 855
BS EN 850
BS EN 852-1
Tool - Part 1: Single Spindle Vertical
Moulding Machines (F)
1999 Amd 1 Safety of Woodworking
Machines - One Side Moulding Machines
with Rotating Tool - Part 1: Single Spindle
Vertical Moulding Machines AMD 11096;
April 2001; (F)
1999 Safety of Woodworking Machines One Side Moulding Machines with Rotating
Tool - Part 2: Single Spindle
Handfed/Integrated Fed Routing Machines
(F)
1999 Safety of Woodworking Machines One Side Moulding Machines with Rotating
Tool - Part 3: Numerical Control (NC)
Boring Machines and Routing Machines (F)
1997 Transportable Gas Cylinders - PinIndex, Yoke-Type Valve Outlet Connections
for Medical Use (N)
1997 Amd 1 Transportable Gas Cylinders Pin-Index, Yoke-Type Valve Outlet
Connections for Medical Use AMD 10097;
July 1998; Supersedes BS 1319:1976 and BS
1319C:1976; (N)
1996 Aluminium and Aluminium Alloys Circle and Circle Stock for the Production of
Culinary Utensils - Specifications (V)
1997 Rubber Hoses and Hose Assemblies Wire Braid Reinforced Hydraulic Type Specification Supersedes BS 3832: 1991; (E)
1997 Rubber Hoses and Hose Assemblies Textile Reinforced Hydraulic Type Specification (E)
1997 Plastics Hoses and Hose Assemblies Thermoplastics Textile Reinforced Hydraulic
Type - Specification This Standard is a
Revision of BS 4983: 1992; (E)
1997 Amd 2 Transportable Gas Cylinders Pin-Index, Yoke-Type Valve Outlet
Connections for Medical Use AMD 13044:
May 2001; Supersedes BS 1319:1976 and BS
1319C:1976; (N)
1996 Plastics Piping Systems for the
Transport of Water Intended for Human
Consumption - Migration Assessment Part 1:
Determination of Migration Values of
BS EN 856
BS EN 857
BS EN 858-1
BS EN 859
BS EN 860
BS EN 862
BS EN 864
BS EN 865
BS EN 866-1
BS EN 866-2
BS EN 866-3
BS EN 866-5
BS EN 866-6
Plastics Pipes (V)
1997 Rubber Hoses and Hose Assemblies Rubber-Covered Spiral Wire Reinforced
Hydraulic Type - Specification (E)
1997 Rubber Hoses and Hose Assemblies Wire Braid Reinforced Compact Type for
Hydraulic Applications - Specification (E)
2002 Separator Systems for Light Liquids
(e.g. Oil and Petrol) - Part 1: Principles of
Product Design, Performance and Testing,
Marking and Quality Control (E)
1998 Safety of Woodworking Machines Handfed Surface Planing Machines (F)
1997 Safety of Woodworking Machines One Side Thickness Planing Machines (F)
2001 Packaging - Child-Resistant Packaging
- Requirements and Testing Procedures for
Non-Reclosable Packages for NonPharmaceutical Products (H)
1997 Medical Electrical Equipment Capnometers for Use with Humans Particular Requirements Also Numbered as
BS 5724: Section 2.30: 1997; (N)
1997 Pulse Oximeters - Particular
Requirements Also Numbered as BS 5724:
Section 2.201: 1997; (N)
1997 Biological Systems for Testing
Sterilizers and Sterilization Processes Part 1:
General Requirements (N)
1998 Biological Systems for Testing
Sterilizers and Sterilization Processes Part 2:
Particular Systems for Use in Ethylene Oxide
Sterilizers (N)
1997 Biological Systems for Testing
Sterilizers and Sterilization Processes Part 3:
Particular Systems for Use in Moist Heat
Sterilizers (N)
2000 Biological Systems for Testing
Sterilizers and Sterilization Processes - Part
5: Particular Systems for Use in Low
Temperature Steam and Formaldehyde
Sterilizers (N)
2000 Biological Systems for Testing
Sterilizers and Sterilization Processes - Part
6: Particular Systems for Use in Dry Heat
Sterilizers (N)
BS EN 866-7
BS EN 866-8
BS EN 867-1
BS EN 867-2
BS EN 867-3
BS EN 868-1
BS EN 869
BS EN 883
BS EN 867-3
BS EN 867-5
BS EN 868-2
BS EN 868-3
2000 Biological Systems for Testing
Sterilizers and Sterilization Processes - Part
7: Particular Requirements for SelfContained Biological Indicator Systems for
Use in Moist Heat Sterilizers (N)
2000 Biological Systems for Testing
Sterilizers and Sterilization Processes - Part
8: Particular Requirements for SelfContained Biological Indicator Systems for
Use in Ethylene Oxide Sterilizers (N)
1997 Non-Biological Systems for Use in
Sterilizers Part 1: General Requirements (N)
1997 Non-Biological Systems for Use in
Sterilizers Part 2: Process Indicators (Class
A) (N)
1997 Non-Biological Systems for Use in
Sterilizers Part 3: Specification for Class B
Indicators for Use in the Bowie and Dick
Test (N)
1997 Packaging Materials and Systems for
Medical Devices Which are to be Sterilized
Part 1: General Requirements and Test
Methods (N)
1998 Safety Requirements for High Pressure
Metal Diecasting Units (F)
1997 Chemicals Used for Treatment of Water
Intended for Human Consumption Polyaluminium Chloride Hydroxide and
Polyaluminium Chloride Hydroxide Sulfate
(W)
1997 Corr 1 Non-Biological Systems for Use
in Sterilizers Part 3: Specification for Class B
Indicators for Use in the Bowie and Dick
Test CORR 10589; January 2000; (N)
2001 Non-Biological Systems for Use in
Sterilizers - Part 5: Specification for Indicator
Systems and Process Challenge Devices for
Use in Performance Testing for Small
Sterilizers Type B and Type S (N)
1999 Packaging Materials and Systems for
Medical Devices Which are to Be Sterilized Part 2: Sterilization Wrap - Requirements and
Test Methods Supersedes BS 6254:1989 and
BS 6255:1989; (N)
1999 Packaging Materials and Systems for
Medical Devices Which Are to Be Sterilized
BS EN 868-4
BS EN 868-5
BS EN 868-6
BS EN 868-7
BS EN 868-8
BS EN 868-9
BS EN 868-10
- Part 3: Paper for Use in the Manufacture of
Paper Bags (Specified in EN 868-4) and in
the Manufacture of Pouches and Reels
(Specified in EN 868-5) - Requirements and
Tes
1999 Packaging Materials and Systems for
Medical Devices Which Are to Be Sterilized
- Part 4:Paper Bags - Requirements and Test
Methods Supersedes BS 6257: 1989; (N)
1999 Packaging Materials and Systems for
Medical Devices Which Are to Be Sterilized
- Part 5: Heat and Self-Sealable Pouches and
Reels of Paper and Plastic Film Construction
- Requirements and Test Methods Supersedes
BS 6871: 1989; (N)
1999 Packaging Materials and Systems for
Medical Devices Which are to Be Sterilized Part 6: Paper for the Manufacture of Packs
for Medical Use for Sterilization by Ethylene
Oxide or Irradiation - Requirements and Test
Methods (N)
1999 Packaging Materials and Systems for
Medical Devices Which are to Be Sterilized Part 7: Adhesive Coated Paper for the
Manufacture of Heat Sealable Packs for
Medical Use for Sterilization by Ethylene
Oxide or Irradiation - Requirements and Test
Metho
1999 Packaging Materials and Systems for
Medical Devices Which are to Be Sterilized Part 8: Re-Usable Sterilization Containers for
Steam Sterilizers Conforming to EN 285 Requirements and Test Methods (N)
2000 Packaging Materials and Systems for
Medical Devices Which Are to Be Sterilized
- Part 9: Uncoated Nonwoven Materials of
Polyolefines for Use in the Manufacture of
Heat Sealable Pouches, Reels and Lids Requirements and Test Methods (N)
2000 Packaging Materials and Systems for
Medical Devices Which Are to Be Sterilized
- Part 10: Adhesive Coated Nonwoven
Materials of Polyolefines for Use in the
Manufacture of Heat Sealable Pouches, Reels
and Lids - Requirements and Test Methods
(N)
BS EN 877
BS EN 892
BS EN 894-2
BS EN 894-3
BS EN 906
BS EN 943-2
BS EN 894-1
BS EN 948
BS EN 907
BS EN 908
BS EN 909
BS EN 910
BS EN 911
BS EN 912
1999 Cast Iron Pipes and Fittings, Their
Joints and Accessories for the Evacuation of
Water from Buildings - Requirements, Test
Methods and Quality Assurance Supersedes
BS 416-2: 1990 and BS 6087: 1990; (F)
1997 Mountaineering Equipment - Dynamic
Mountaineering Ropes - Safety Requirements
and Test Methods (L)
1997 Safety of Machinery - Ergonomics
Requirements for the Design of Displays and
Control Actuators Part 2: Displays (F)
2000 Safety of Machinery - Ergonomics
Requirements for the Design of Displays and
Control Actuators Part 3: Control Actuators
(F)
1996 Polyolefin Agricultural Twines (L)
2002 Protective Clothing Against Liquid and
Gaseous Chemicals, Including Liquid
Aerosols and Solid Particles - Part 2:
Performance Requirements for
1997 Safety of Machinery - Ergonomics
Requirements for the Design of Displays and
Control Actuators Part 1: General Principles
for Human Interactions with Displays and
Control Actuators (F)
1999 Hinged or Pivoted Doors Determination of the Resistance to Static
Torsion (R)
1997 Agricultural and Forestry Machinery Sprayers and Liquid Fertilizer Distributors Safety (E)
1999 Agricultural and Forestry Machinery Reel Machines for Irrigation - Safety (E)
1999 Agricultural and Forestry Machinery Centre Pivot and Moving Lateral Types
Irrigation Machines - Safety (E)
1996 Destructive Tests on Welds in Metallic
Materials - Bend Tests (F)
1996 Plastics Piping Systems - Elastomeric
Sealing Ring Type Joints and Mechanical
Joints for Thermoplastics Pressure Piping Test Method for Leaktightness Under
External Hydrostatic Pressure (V)
2000 Timber Fasteners - Specifications for
Connectors for Timber Supersedes BS
1579:1960; (R)
BS EN 917
BS EN 918
BS EN 919
BS EN 923
BS EN 926-1
BS EN 927-1
BS EN 927-3
BS EN 927-4
BS EN 933-5
BS EN 933-6
BS EN 933-7
BS EN 933-8
BS EN 933-9
1997 Plastics Piping Systems Thermoplastics Valves - Test Methods for
Resistance to Internal Pressure and
Leaktightness Also Numbered as BS 2782:
Part 11: Methods 1134A and B: 1997; (V)
1996 Geotextiles and Geotextile-Related
Products - Dynamic Perforation Test (Cone
Drop Test) (L)
1995 Fibre Ropes for General Service Determination of Certain Physical and
Mechanical Properties (Replaces BS 5053:
1985) (L)
1998 Adhesives - Terms and Definitions
Supersedes BS 6138: 1989; (W)
1996 Paragliding Equipment - Paragliders
Part 1: Requirements and Test Methods for
Structural Strength (L)
1997 Paints and Varnishes - Coating
Materials and Coating Systems for Exterior
Wood - Part 1: Classification and Selection
(W)
2000 Paints and Varnishes - Coating
Materials and Coating Systems for Exterior
Wood - Part 3: Natural Weathering Test (W)
2000 Paints and Varnishes - Coating
Materials and Coating Systems for Exterior
Wood - Part 4: Assesssment of the WaterVapour Permeability (W)
1998 Tests for Geometrical Properties of
Aggregates - Part 5: Determination of
Percentage of Crushed and Broken Surfaces
in Coarse Aggregate Particles (R)
2001 Tests for Geometrical Properties of
Aggregates - Part 6: Assessment of Surface
Characteristics - Flow Coefficient of
Aggregates (R)
1998 Tests for Geometrical Properties of
Aggregates - Part 7: Determination of Shell
Content - Percentage of Shells in Coarse
Aggregates Supersedes BS 812-106: 1985;
(R)
1999 Tests for Geometrical Properties of
Aggregates - Part 8: Assessment of Fines Sand Equivalent Test (R)
1999 Tests for Geometrical Properties of
Aggregates - Part 9: Assessment of Fines -
BS EN 933-10
BS EN 934-2
BS EN 934-4
BS EN 934-6
BS EN 934-6
BS EN 940
BS EN 941
BS EN 942
BS EN 947
BS EN 949
BS EN 951
BS EN 953
BS EN 954-1
BS EN 955-2
Methylene Blue Test (R)
2001 Tests for Geometrical Properties of
Aggregates - Part 10: Assessment of Fines Grading of Fillers (Air-Jet Sieving) (R)
2001 Admixtures for Concrete, Mortar and
Grout - Part 2: Concrete Admixtures Definitions, Requirements, Conformity,
Marking and Labelling (R)
2001 Admixtures for Concrete, Mortar and
Grout - Part 4: Admixtures for Prestressing
Tendons - Definitions, Requirements,
Conformity, Marking and Labelling (R)
2001 Admixtures for Concrete, Mortar and
Grout - Part 6: Sampling, Conformity Control
and Evaluation of Conformity (R)
2001 Corr 1 Admixtures for Concrete, Mortar
and Grout - Part 6: Sampling, Conformity
Control and Evaluation of Conformity CORR
13534: October 19, 2001; (R)
1997 Safety of Woodworking Machines Combined Woodworking Machines (F)
1996 Aluminium and Aluminium Alloys Circle and Circle Stock for General
Applications - Specifications (V)
1996 Timber in Joinery - General
Classification of Timber Quality (V)
1999 Hinged or Pivoted Doors Determination of the Resistance to Vertical
Load (R)
1999 Windows and Curtain Walling, Doors,
Blinds and Shutters - Determination of the
Resistance to Soft and Heavy Body Impact
for Doors (R)
1999 Door Leaves - Method for
Measurement of Height, Width, Thickness
and Squareness (R)
1998 Safety of Machinery - Guards - General
Requirements for the Design and
Construction of Fixed and Movable Guards
(F)
1997 Safety of Machinery - Safety Related
Parts of Control Systems - Part 1. General
Principles for Design (F)
1995 Chemical Analysis of Refractory
Products Part 2: Products Containing Silica
and/or Alumina (Wet Method) (Also
BS EN 957-1
BS EN 957-1
BS EN 957-2
BS EN 957-4
BS EN 957-5
BS EN 957-6
BS EN 957-7
BS EN 967
BS EN 957-8
BS EN 958
BS EN 959
BS EN 962
BS EN 963
Numbered BS 1902: Part 2: Section 2.1:
1995) (V)
1997 Stationary Training Equipment Part 1:
General Safety Requirements and Test
Methods (L)
1997 Amd 1 Stationary Training Equipment
Part 1: General Safety Requirements and Test
Methods AMD 10127; November 15, 1998;
(L)
1997 Stationary Training Equipment Part 2:
Strength Training Equipment - Additional
Specific Safety Requirements and Test
Methods (L)
1997 Stationary Training Equipment Part 4:
Strength Training Benches - Additional
Specific Safety Requirements and Test
Methods (L)
1997 Stationary Training Equipment Part 5:
Pedal Crank Training Equipment - Additional
Specification Safety Requirements and Test
Methods (L)
2001 Stationary Training Equipment - Part 6:
Treadmills, Additional Specific Safety
Requirements and Test Methods (L)
1999 Stationary Training Equipment - Part 7:
Rowing Machines, Additional Specific
Safety Requirements and Test Methods (L)
1997 Head Protectors for Ice Hockey Players
(L)
1998 Stationary Training Equipment - Part 8:
Steppers, Stairclimbers and Climbers Additional Specific Safety Requirements and
Test Methods (H)
1997 Mountaineering Equipment - Energy
Absorbing Systems for Use in Klettersteig
(Via Ferrata) Climbing - Safety
Requirements and Test Methods (L)
1997 Mountaineering Equipment - Rock
Anchors - Safety Requirements and Test
Methods (L)
1997 Transportable Gas Cylinders Valve
Protection Caps and Valve Guards for
Industrial and Medical Gas Cylinders Design, Construction and Tests (E)
1995 Geotextiles and Geotextile-Related
Products - Sampling and Preparation of Test
BS EN 962
BS EN 962
BS EN 964-1
BS EN 965
BS EN 998-2
BS EN 970
BS EN 971-1
BS EN 976-1
BS EN 976-2
BS EN 977
BS EN 978
BS EN 985
BS EN 989
Specimens (L)
1997 Amd 1 Transportable Gas Cylinders
Valve Protection Caps and Valve Guards for
Industrial and Medical Gas Cylinders Design, Construction and Tests AMD 10791
June 2000;(E)
1997 Amd 2 Transportable Gas Cylinders
Valve Protection Caps and Valve Guards for
Industrial and Medical Gas Cylinders Design, Construction and Tests AMD
11089:May 2001;(E)
1995 Geotextiles and Geotextile-Related
Products - Determination of Thickness at
Specified Pressures Part 1: Single Layers (R)
1995 Geotextiles and Geotextile-Related
Products - Determination of Mass per Unit
Area (L)
2002 Mortar for Masonry - Part 2: Masonry
Mortar (R)
1997 Non-Destructive Examination of Fusion
Welds - Visual Examination (F)
1996 Paints and Varnishes - Terms and
Definitions for Coating Materials - Part 1:
General Terms (W)
1997 Underground Tanks of GlassReinforced Plastics (GRP) - Horizontal
Cylindrical Tanks for the Non-Pressure
Storage of Liquid Petroleum Based Fuels
Part 1: Requirements and Test Methods for
Single Wall Tanks (Q)
1997 Underground Tanks of GlassReinforced Plastics (GRP) - Horizontal
Cylindrical Tanks for the Non-Pressure
Storage of Liquid Petroleum Based Fuels
Part 2: Transport, Handling, Storage and
Installation of Single Wall Tanks (Q)
1998 Underground Tanks of GlassReinforced Plastics (GRP) - Method for One
Side Exposure to Fluids (Q)
1997 Underground Tanks of GlassReinforced Plastics (GRP) - Determination of
Factor Alpha and Factor Beta (Q)
2001 Textile Floor Coverings - Castor Chair
Test (L)
1996 Determination of the Bond Behaviour
Between Reinforcing Bars and Autoclaved
BS EN 981
BS EN 983
BS EN 984
BS EN 986
BS EN 988
BS EN 990
BS EN 991
BS EN 992
BS EN 993-2
BS EN 993-3
BS EN 993-4
BS EN 993-1
Aerated Concrete by the
1997 Safety of Machinery - System of
Auditory and Visual Danger and Information
Signals (F)
1996 Safety of Machinery - Safety
Requirements for Fluid Power Systems and
Their Components - Pneumatics (F)
1995 Determination of the Mass per Unit
Area of the Surface of Needled Floor
Coverings (L)
1995 Textile Floor Coverings - Tiles Determination of Dimensional Changes Due
to the Effects of Varied Water and Heat
Conditions and Distortion out of Plane (L)
1997 Zinc and Zinc Alloys - Specification for
Rolled Flat Products for Building Supersedes
BS 6561: 1985 (V)
1996 Test Methods for Verification of
Corrosion Protection of Reinforcement in
Autoclaved Aerated Concrete and
Lightweight Aggregate Concrete with Open
Structure (R)
1996 Determination of the Dimensions of
Prefabricated Reinforced Components Made
of Autoclaved Aerated Concrete or
Lightweight Aggregate Concrete with Open
Structure (R)
1996 Determination of the Dry Density of
Lightweight Aggregate Concrete with Open
Structure (R)
1995 Methods of Test for Dense Shaped
Refractory Products Part 2: Determination of
True Density (Also Numbered BS 1902: Part
3: Section 3.4: 1995) (F)
1997 Methods of Test for Dense Shaped
Refractory Products Part 3: Test Methods for
Carbon-Containing Refractories Supersedes
BS 1902: Part 8: 1988; (F)
1995 Methods of Test for Dense Shaped
Refractory Products Part 4: Determination of
Permeability to Gases (Also Numbered BS
1902: Part 3: Section 9: 1995) (F)
1995 Methods of Test for Dense Shaped
Refractory Products Part 1: Determination of
Bulk Density, Apparent Porosity and True
Porosity (Also Numbered BS 1902: Part 3:
BS EN 993-5
BS EN 993-6
BS EN 993-7
BS EN 993-8
BS EN 993-9
BS EN 993-10
BS EN 993-12
BS EN 993-13
BS EN 993-14
BS EN 993-15
Section 3.8: 1995) (F)
2000 Methods of Test for Dense Shaped
Refractory Products - Part 5: Determination
of Cold Crushing Strength Supersedes BS
1902-4.3:1985; (F)
1995 Methods of Test for Dense Shaped
Refractory Products Part 6: Determination of
Modulus of Rupture at Ambient Temperature
(Also Numbered BS 1902: Part 4: Section
4.4: 1995) (F)
2000 Methods of Test for Dense Shaped
Refractory Products - Part 7: Determination
of Modulus of Rupture at Elevated
Temperatures Supersedes BS 1902-4.5:1984;
(F)
1997 Methods of Test for Dense Shaped
Refractory Products Part 8: Determination of
Refractoriness-Under-Load Supersedes BS
1902: Section 4.9: 1985; (F)
1997 Methods of Test for Dense Shaped
Refractory Products Part 9: Determination of
Creep in Compression Supersedes BS 1902:
Section 4.10: 1990; (F)
1998 Methods of Test for Dense Shaped
Refractory Products Part 10: Determination
of Permanent Change in Dimension on
Heating Also Numbered as BS 1902-5.10:
1998; Supersedes BS 1902: Part 5: Section
5.10: 1986; (F)
1997 Dense Shaped Refractory Products Part
12: Determination of Pyrometric Cone
Equivalent (Refractoriness) (F)
1995 Methods of Test for Dense Shaped
Refractory Products Part 13: Specification for
Pyrometric Reference Cones for Laboratory
Use (F)
1998 Methods of Test for Dense Shaped
Refractory Products - Part 14:Determination
of Thermal Conductivty by the Hot-Wire
(Cross-Array) Method Also Numbered as BS
1902-5.6: 1998; Supersedes BS 1902-5.6:
1985; (F)
1998 Methods of Test for Dense Shaped
Refractory Products - Part 15:Determination
of Thermal Conductivty by the Hot-Wire
(Parallel) Method (F)
BS EN 993-16
BS EN 993-17
BS EN 994
BS EN 995
BS EN 999
BS EN 999
BS EN 655
BS EN 660-1
BS EN 660-2
BS EN 669
BS EN 656
BS EN 658-1
1995 Dense Shaped Refractory Products Methods of Test Part 16: Determination of
Resistance to Sulfuric Acid (Replaces BS
1902: Part 3: Section 3.12: 1989) (F)
1999 Methods of Test for Dense Shaped
Refractory Products - Part 17: Determination
of Bulk Density of Granular Materials by the
Mercury Method with Vacuum Supersedes
BS 1902-3.6: 1984; (F)
1996 Textile Floor Coverings Determination of the Side Length,
Squareness and Straightness of Tiles (L)
1996 Textile Floor Coverings - Assessment
of the Creep of the Backings (L)
1999 Safety of Machinery - The Positioning
of Protective Equipment in Respect of
Approach Speeds of Parts of the Human
Body
1999 Corr 1 Safety of Machinery - The
Positioning of Protective Equipment in
Respect of Approach Speeds of Parts of the
Human Body CORR 10653; August, 1999;
(F)
1997 Resilient Floor Coverings - Tiles of
Aggolmerated Composition Cork with
Polyvinyl Chloride Wear Layer Specification (L)
1999 Resilient Floor Coverings Determination of Wear Resistance - Part 1:
Stuttgart Test (L)
1999 Resilient Floor Coverings Determination of Wear Resistance - Part 2:
Frick-Taber Test (L)
1998 Resilient Floor Coverings Determination of Dimensional Stability of
Linoleum Tiles Caused by Changes in
Atmospheric Humidity (L)
2000 Gas-Fired Central Heating Boilers Type B Boilers of Nominal Heat Input
Exceeding 70 kW but Not Exceeding 300 kW
Partially Supersedes BS 5978-1, -2, and -3:
1989; (Q)
1998 Advanced Technical Ceramics Mechanical Properties of Ceramic
Composites at Room Temperature - Part 1:
Determination of Tensile Properties
BS EN 670
BS EN 671-3
BS EN 672
BS EN 673
BS EN 673
BS EN 674
BS EN 675
BS EN 676
BS EN 676
BS EN 677
BS EN 678
BS EN 679
BS EN 680
BS EN 681-1
Supersedes DD ENV 658-1: 1993; (V)
1998 Resilient Floor Coverings Identification of Linoleum and Determination
of Cement Content and Ash Residue (L)
2000 Fixed FireFighting Systems - Hose
Systems - Part 3: Maintenance of Hose Reels
with Semi-Rigid Hose and Hose Systems
with Lay-Flat Hose (R)
1997 Resilient Floor Coverings Determination of Apparent Density of
Agglomerated Cork (R)
1998 Glass in Building - Determination of
Thermal Transmittance (U Value) Calculation Method (R)
1998 Amd 1 Glass in Building Determination of Thermal Transmittance (U
Value) - Calculation Method AMD 13367:
September 12, 2001; (R)
1998 Glass in Building - Determination of
Thermal Transmittance (U Value) - Guarded
Hot Plate Method (R)
1998 Glass in Building - Determination of
Thermal Transmittance (U Value) - Heat
Flow Meter Method (R)
1997 Automatic Forced Draught Burners for
Gaseous Fuels Partly Supersedes BS 5885:
Part 1: 1988; (F)
1997 Amd 1 Automatic Forced Draught
Burners for Gaseous Fuels AMD 9857;
February 15, 1998; Partly Supersedes BS
5885: Part 1: 1988 and BS 5885: Part 2:
1987; (F)
1998 Gas-Fired Central Heating Boilers Specific Requirements for Condensing
Boilers with a Nominal Heat Input Not
Exceeding 70 kW Supersedes DD 189: 1990;
(F)
1994 Determination of the Dry Density of
Autoclaved Aerated Concrete (R)
1994 Determination of the Compressive
Strength of Autoclaved Aerated Concrete (R)
1994 Determination of the Drying Shrinkage
of Autoclaved Aerated Concrete (R)
1996 Elastomeric Seals - Materials
Requirements for Pipe Joint Seals Used in
Water and Drainage Applications Part 1:
BS EN 681-1
BS EN 681-2
BS EN 681-3
BS EN 681-4
BS EN 683-1
BS EN 683-2
BS EN 683-3
BS EN 686
BS EN 687
BS EN 687
BS EN 688
BS EN 696
BS EN 696
BS EN 697
Vulcanized Rubber (E)
1996 Amd 1 Elastomeric Seals - Material
Requirements for Pipe Joint Seals Used in
Water and Drainage Applications Part 1:
Vulcanized Rubber AMD 10214; December
15, 1998; (E)
2000 Elastomeric Seals - Materials
Requirements for Pipe Joint Seals Used in
Water and Drainage Applications - Part 2:
Thermoplastic Elastomers (E)
2000 Elastomeric Seals - Materials
Requirements for Pipe Joint Seals Used in
Water and Drainage Applications - Part 3:
Cellular Materials of Vulcanized Rubber (E)
2000 Elastomeric Seals - Materials
Requirements for Pipe Joint Seals Used in
Water and Drainage Applications - Part 4:
Cast Polyurethane Sealing Elements (E)
1996 Aluminium and Aluminium Alloys Finstock - Part 1: Technical Conditions for
Inspection and Delivery (V)
1997 Aluminium and Aluminium Alloys Finstock - Part 2: Mechanical Properties (V)
1997 Aluminium and Aluminium Alloys Finstock - Part 3: Tolerances on Dimensions
and Form (V)
1997 Resilient Floor Coverings Specification for Plain and Decorative
Linoleum on a Foam Backing (R)
1997 Resilient Floor Coverings Specification for Plain and Decorative
Linoleum on a Corkment Backing (R)
1997 Amd 1 Resilient Floor Coverings Specification for Plain and Decorative
Linoleum on a Corkment Backing AMD
9832; January 15, 1998; (R)
1997 Resilient Floor Coverings Specification for Corklinoleum (R)
1995 Fibre Ropes for General Service Polyamide (Replaces BS 4928: 1985 and BS
7628: 1993) (L)
1995 Amd 1 Fibre Ropes for General Service
- Polyamide (AMD 9110) June 15, 1996 (L)
1995 Fibre Ropes for General Service Polyester (Replaces BS 4928: 1985 and BS
7648: 1993) (L)
BS EN 736-2
BS EN 771-2
BS EN 697
BS EN 698
BS EN 699
BS EN 700
BS EN 701
BS EN 701
BS EN 704
BS EN 706
BS EN 708
BS EN 708
BS EN 709
BS EN 771-4
BS EN 950
BS EN 709
BS EN 710
BS EN 716-1
1997 Valves - Terminology Part 2: Definition
of Components of Valves (E)
2001 Masonry Units - Part 2: Calcium
Silicate Masonry Units (R)
1995 Amd 1 Fibre Ropes for General Service
- Polyester (AMD 9108) June 15, 1996 (L)
1995 Fibre Ropes for General Service Manila and Sisal (Replaces BS 2052: 1989)
(L)
1995 Fibre Ropes for General Service Polypropylene (Replaces BS 4928: 1985) (L)
1995 Fibre Ropes for General Service Polyethylene (Replaces BS 4928: 1985) (L)
1995 Fibre Ropes for General Service General Specification (Replaces BS 2052:
1989, BS 4928: 1985, BS 6033: 1981 and BS
7648: 1993) (L)
1995 Amd 1 Fibre Ropes for General Service
- General Specification (AMD 9109) June 15,
1996) (L)
1999 Agricultural Machinery - Pick-Up
Balers - Safety (E)
1997 Agricultural Machinery - Vine Shoot
Tipping Machines - Safety (F)
1997 Agricultural Machinery - Soil Working
Machines with Powered Tools - Safety (E)
1997 Amd 1 Agricultural Machinery - Soil
Working Machines with Powered Tools Safety AMD 10980: January 2001; (E)
1997 Agricultural and Forestry Machinery Pedestrian Controlled Tractors with Mounted
Rotary Cultivators, Motor Hoes, Motor Hoes
with Drive Wheel(s) - Safety (E)
2001 Masonry Units - Part 4: Autoclaved
Aerated Concrete Masonry Units (R)
1999 Door Leaves - Determination of the
Resistance to Hard Body Impact (R)
1997 Amd 1 Agricultural and Forestry
Machinery - Pedestrian Controlled Tractors
with Mounted Rotary Cultivators, Motor
Hoes, Motor Hoes with Drive Wheel(s) Safety AMD 10715; October 1999; (E)
1998 Safety Requirements for Foundry
Moulding and Coremaking Machinery and
Plant and Associated Equipment (F)
1996 Furniture - Children's Cots and Folding
BS EN 723
BS EN 725-1
BS EN 725-5
BS EN 725-6
BS EN 716-1
BS EN 725-3
BS EN 725-7
BS EN 725-8
BS EN 725-9
BS EN 725-10
BS EN 725-12
BS EN 726-2
Cots for Domestic Use Part 1: Safety
Requirements (L) To be Used in Conjunction
with BS 7423 and BS EN 716-2
1996 Copper and Copper Alloys Combustion Method for Determination of
Carbon on the Inner Surface of Copper Tubes
or Fittings (V)
1997 Advanced Technical Ceramics Methods of Test for Ceramic Powders Part 1:
Determination of Impurities in Alumina (V)
1996 Advanced Technical Ceramics Methods of Test for Ceramic Powders Part 5:
Determination of the Particle Size
Distribution (V)
1996 Advanced Technical Ceramics Methods of Test for Ceramic Powders Part 6:
Determination of the Specific Surface Area
(V)
1996 Amd 1 Furniture - Children's Cots and
Folding Cots for Domestic Use Part 1: Safety
Requirements AMD 9413 March 15, 1996;
To be Used in Conjunction with Bs 7423 and
BS EN 716-2; (L)
1994 Advanced Technical Ceramics Methods of Test for Ceramic Powders Part 3:
Determination of the Oxygen Content of
Non-Oxides by Thermal Extraction with a
Carrier Gas (V)
1996 Advanced Technical Ceramics Methods of Test for Ceramic Powders Part 7:
Determination of the Absolute Density (V)
1997 Advanced Technical Ceramics Methods of Test for Ceramic Powders Part 8:
Determination of Tapped Bulk Density (V)
1997 Advanced Technical Ceramics Methods of Test for Ceramic Powders Part 9:
Determination of Untamped Bulk Density
(V)
1997 Advanced Technical Ceramics Methods of Test for Ceramic Powders Part
10: Determination of Compaction Properties
(V)
2001 Advanced Technical Ceramics Methods of Test for Ceramic Powders - Part
12: Chemical Analysis of Zirconia (V)
1996 Identification Card Systems -
BS EN 726-5
BS EN 726-6
BS EN 726-7
BS EN 728
BS EN 732
BS EN 736-3
BS EN 737-1
BS EN 737-2
BS EN 737-2
BS EN 737-3
Telecommunications Integrated Circuit(s)
Cards and Terminals Part 2: Security
Framework (S)
1999 Identification Card Systems Telecommunications Integrated Circuit(s)
Cards and Terminals - Part 5: Payment
Methods (S)
1996 Identification Card Systems Telecommunications Integrated Circuit(s)
Cards and Terminals Part 6:
Telecommunication Features (S)
1999 Identification Card Systems Telecommunications Integrated Circuit(s)
Cards and Terminals - Part 7: Security
Module (S)
1997 Plastics Piping and Ducting Systems Polyolefin Pipes and Fittings - Determination
of Oxidation Induction Time Also Numbered
as BS 2782: Part 11: Method 1103D: 1997;
(V)
1999 Specifications for Dedicated Liquefied
Petroleum Gas Appliances - Absorption
Refrigerators Supersedes BS 5258-6: 1988;
(L)
1999 Valves - Terminology - Part 3:
Definition of Terms (E)
1998 Medical Gas Pipeline Systems - Part 1:
Terminal Units for Compressed Medical
Gases and Vacuum Together with BS EN
739: 1998, it Partially Supersedes BS 5682:
1984:(N)
1998 Medical Gas Pipeline Systems - Part 2:
Anaesthetic Gas Scavenging Disposal
Systems - Basic Requirements Together with
BS EN 737-4: 1998 and Clause 111 of BS
EN 740: 1998, it Supersedes BS 6834: 1987;
(N)
1998 Amd 1 Medical Gas Pipeline Systems Part 2: Anaesthetic Gas Scavenging Disposal
Systems - Basic Requirements AMD 10864,
August 2000; Together with BS EN 737-4:
1998 and Clause 111 of BS EN 740: 1998, it
Supersedes BS 6834: 1987; (N)
2000 Medical Gas Pipeline Systems - Part 3:
Pipelines for Compressed Medical Gases and
Vacuum
BS EN 738-1
BS EN 738-2
BS EN 738-3
BS EN 738-4
BS EN 737-4
BS EN 739
BS EN 740
BS EN 741
BS EN 745
BS EN 746-1
BS EN 746-2
BS EN 746-3
1997 Pressure Regulators for Use with
Medical Gases Part 1: Pressure Regulators
and Pressure Regulators with Flow Metering
Devices (N)
1999 Corr 1 Pressure Regulators for Use with
Medical Gases Part 2: Manifold and Line
Pressure Regulators 10802 Corr.No.1, March
2000
1999 Pressure Regulators for Use with
Medical Gases - Part 3: Pressure Regulators
Integrated with Cylinder Valves (N)
1999 Pressure Regulators for Use with
Medical Gases - Part 4: Low-Pressure
Regulators Intended for Incorporation into
Medical Equipment (N)
1998 Medical Gas Pipeline Systems Part 4:
Terminal Units for Anaesthetic Gas
Scavenging Systems Together with BS EN
737-2: 1998 and Clause 111 of BS EN 740:
1998, it Supersedes BS 6834: 1987, Which
will be Withdrawn in Due Course; (N)
1998 Low-Pressure Hose Assemblies for Use
with Medical Gases Together with BS EN
737-1: 1998, it Partially Supersedes BS 5682:
1984; (N)
1999 Anaesthetic Workstations and Their
Modules - Particular Requirements Also
Numbered as BS 5724-2.204: 1999;
Supersedes BS 5724-13: 1990; Clause 111 of
this Standard with BS EN 737-2: 1998 and
BS EN 737-4: 1998, Supersedes BS 6834:
1987; (N)
2000 Continuous Handling Equipment and
Systems - Safety Requirements for Systems
and Their Components for pneumatic
Handling of Bulk Materials (Q)
1999 Agricultural Machinery - Rotary
Mowers and Flail-Mowers - Safety (E)
1997 Industrial Thermoprocessing
Equipment Part 1: Common Safety
Requirements for Industrial
Thermoprocessing Equipment (F)
1997 Industrial Thermoprocessing
Equipment Part 2: Safety Requirements for
Combustion and Fuel Handling Systems (F)
1997 Industrial Thermoprocessing
BS EN 746-4
BS EN 746-5
BS EN 746-8
BS EN 754-4
BS EN 754-5
BS EN 754-6
BS EN 754-7
BS EN 754-8
BS EN 755-1
BS EN 755-2
BS EN 755-2
BS EN 755-3
Equipment Part 3: Safety Requirements for
the Generation and Use of Atmosphere Gases
(F)
2000 Industrial Thermoprocessing
Equipment - Part 4: Particular Safety
Requirements for Hot Dip Galvanizing
Thermoprocessing Equipment (F)
2000 Industrial Thermoprocessing
Equipment - Part 5: Particular Safety
Requirements for Salt Bath
Thermoprocessing Equipment (F)
2000 Industrial Thermoprocessing
Equipment - Part 8: Particular Safety
Requirements for Quenching Equipment (F)
1996 Aluminium and Aluminium Alloys Cold Drawn Rod/Bar and Tube Part 4:
Square Bars, Tolerances on Dimensions and
Form (V)
1996 Aluminium and Aluminium Alloys Cold Drawn Rod/Bar and Tube Part 5:
Rectangular Bars, Tolerances on Dimensions
and Form (V)
1996 Aluminium and Aluminium Alloys Cold Drawn Rod/Bar and Tube Part 6:
Hexagonal Bars, Tolerances on Dimensions
and Form (V)
1998 Aluminium and Aluminium Alloys Cold Drawn Rod/Bar and Tube - Part 7:
Seamless Tubes, Tolerances on Dimensions
and Form Supersedes BS 1471: 1972; (V)
1998 Aluminium and Aluminium Alloys Cold Drawn Rod/Bar and Tube - Part 8:
Porthole Tubes, Tolerances on Dimensions
and Form Supersedes BS 1471: 1972; (V)
1997 Aluminium and Aluminium Alloys Extruded Rod/Bar, Tube and Profiles Part 1:
Technical Conditions for Inspection and
Delivery (V)
1997 Aluminium and Aluminium Alloys Extruded Rod/Bar, Tube and Profiles Part 2:
Mechanical Properties (V)
1997 Corr 1 Aluminium and Aluminium
Alloys - Extruded Rod/Bar, Tube and
Profiles Part 2: Mechanical Properties CORR
10035; June 1998; (V)
1996 Aluminium and Aluminium Alloys -
BS EN 755-4
BS EN 755-5
BS EN 755-6
BS EN 755-7
BS EN 755-8
BS EN 755-9
BS EN 756
BS EN 757
BS EN 758
BS EN 759
Extruded Rod/ Bar, Tube and Profiles Part 3:
Round Bars, Tolerances on Dimensions and
Form (V)
1996 Aluminium and Aluminium Alloys Extruded Rod/ Bar, Tube and Profiles Part 4:
Square Bars, Tolerances on Dimensions and
Form (V)
1996 Aluminium and Aluminium Alloys Extruded Rod/ Bar, Tube and Profiles - Part
5: Rectangular Bars, Tolerances on
Dimensions and Form (V)
1996 Aluminium and Aluminium Alloys Extruded Rod/ Bar, Tube and Profiles - Part
6: Hexagonal Bars, Tolerances on
Dimensions and Form (V)
1998 Aluminium and Aluminium Alloys Extruded Rod/Bar, Tube and Profiles - Part
7: Seamless Tubes, Tolerances on
Dimensions and Form (V)
1998 Aluminium and Aluminium Alloys Extruded Rod/Bar; Tube and Profiles - Part
8: Porthole Tubes, Tolerances on Dimensions
and Form (V)
2001 Corr 1 Aluminium and Aluminium
Alloys - Extruded Rod/Bar, Tube and
Profiles - Part 9: Profiles, Tolerances on
Dimensions and Form CORR 13301:July
2001; Together with BS EN 515:1993, BS
EN 573-3 and -4:1995, BS EN 755-1 and 2:1997, BS EN 755-3 Thru 1996 Welding Consumables - Wire
Electrodes and Wire-Flux Combinations for
Submerged Arc Welding of Non Alloy and
Fine Grain Steels - Classification (F)
1997 Welding Consumables - Covered
Electrodes for Manual Metal Arc Welding of
High Strength Steels - Classification Partially
Supersedes BS 2493: 1985; (F)
1997 Welding Consumables - Tubular Cored
Electrodes for Metal Arc Welding with and
without a Gas Shield of Non-Alloy and Fine
Grain Steels - Classification Supersedes BS
7084: 1989; (F)
1997 Welding Consumables - Technical
Delivery Conditions for Welding Filler
Metals - Type of Product, Dimensions,
BS EN 760
BS EN 772-1
BS EN 772-16
BS EN 791
BS EN 796
BS EN 772-2
BS EN 772-3
BS EN 772-4
BS EN 772-5
BS EN 772-6
BS EN 772-7
BS EN 772-10
BS EN 772-13
BS EN 772-15
Tolerances and Marking Supersedes BS EN
20544: 1991; (F)
1996 Welding Consumables Fluxes for
Submerged Arc Welding Classification (F)
2000 Methods of Test for Masonry Units Part 1: Determination of Compressive
Strength (R)
2000 Methods of Test for Masonry Units Part 16: Determination of Dimensions (R)
1996 Drill Rigs - Safety (Q)
1996 Bar Coding - Symbology Identifiers (S)
1998 Methods of Test for Masonry Units Part 2: Determination of Percentage Area of
Voids in Aggregate Concrete Masonry Units
(by Paper Indentation) Partially Supersedes
BS 6073-1: 1981; (R)
1998 Methods of Test for Masonry Units Part 3: Determination of Net Voids of Clay
Masonry Units by Hydrostatic Weighing
Partially Supersedes BS 3921: 1985; (R)
1998 Methods of Test for Masonry Units Part 4: Determination of Real and Bulk
Density and of Total and Open Porosity for
Natural Stone Masonry Units (R)
2001 Methods of Test for Masonry Units Part 5: Determination of the Active Soluble
Salts Content of Clay Masonry Units (R)
2001 Methods of Test for Masonry Units Part 6: Determination of Bending Tensile
Strength of Aggregate Concrete Masonry
Units (R)
1998 Methods of Test for Masonry Units Part 7: Determination of Water Absorption of
Clay Masonry Damp Proof Course Units by
Boiling in Water Partially Supersedes BS
3921: 1985; (R)
1999 Methods of Test for Masonry Units Part 10: Determination of Moisture Content
of Calcium Silicate and Autoclaved Aerated
Concrete Units (R)
2000 Methods of Test for Masonry Units Part 13: Determination of Net and Gross Dry
Density of Masonry Units (Except for
Natural Stone) (R)
2000 Methods of Test for Masonry Units Part 15: Determination of Water Vapour
BS EN 772-9
BS EN 772-11
BS EN 772-18
BS EN 772-19
BS EN 772-20
BS EN 778
BS EN 786
BS EN 786
BS EN 789
BS EN 792-1
Permeability of Autoclaved Aerated Concrete
Masonry Units (R)
1998 Methods of Test for Masonry Units Part 9: Determination of Volume and
Percentage of Voids and Net Volume of
Calcium Silicate Masonry Units by Sand
Filling (R)
2000 Methods of Test for Masonry Units Part 11: Determination of Water Absorption
of Aggregate Concrete, Manufactured Stone
and Natural Stone Masonry Units Due to
Capillary Action and the Initial Rate of Water
Absorption of Clay Masonry Units (R)
2000 Methods of Test for Masonry Units Part 18: Determination of Freeze-Thaw
Resistance of Calcium Silicate Masonry
Units (R)
2000 Methods of Test for Masonry Units Part 19: Determination of Moisture
Expansion of Large Horizontally Perforated
Clay Masonry Units (R)
2000 Methods of Test for Masonry Units Part 20: Determination of Flatness of Faces
of Aggregate Concrete, Manufactured Stone
and Natural Stone Masonry Units (R)
Domestic Gas-Fired Forced Convection Air
Heaters for Space Heating Not Exceeding a
Net Heat Input of 70 kW, without a Fan to
Assist Transportation of Combustion Air
and/or Combustion Products Supersedes BS
5258-4: 1987 and BS 6332-5: 1986; (L)
1996 Garden Equipment - Electrically
Powered Walk-Behind and Hand- Held Lawn
Trimmers and Lawn Edge Trimmers Mechanical Safety (L)
1996 Corr AC Garden Equipment Electrically Powered Walk-Behind and
Hand-Held Lawn Trimmers and Lawn Edge
Trimmers - Mechanical Safety CORR 13211;
(L)
1996 Timber Structures - Test Methods Determination of Mechanical Properties of
Wood-Based Panels (R)
2000 Hand-Held Non-Electric Power Tools Safety Requirements - Part 1: Assembly
Power Tools for Non-Threaded Mechanical
BS EN 792-2
BS EN 792-3
BS EN 792-4
BS EN 792-5
BS EN 792-6
BS EN 792-8
BS EN 792-9
BS EN 792-10
BS EN 792-11
BS EN 792-12
BS EN 792-13
BS EN 793
BS EN 794-2
BS EN 794-1
BS EN 794-1
Fasteners (F)
2000 Hand-Held Non-Electric Power Tools Safety Requirements - Part 2: Cutting-Off
and Crimping Power Tools (F)
2000 Hand-Held Non-Electric Power Tools Safety Requirements - Part 3: Drills and
Tappers (F)
2000 Hand-Held Non-Electric Power Tools Safety Requirements - Part 4: Non-Rotary
Percussive Power Tools (F)
2000 Hand-Held Non-Electric Power Tools Safety Requirements - Part 5: Rotary
Percussive Drills (F)
2000 Hand-Held Non-Electric Power Tools Safety Requirements - Part 6: Assembly
Power Tools for Threaded Fasteners (F)
2001 Hand-Held Non-Electric Power Tools Safety Requirements - Part 8: Sanders and
Polishers (F)
2001 Hand-Held Non-Electric Power Tools Safety Requirements - Part 9: Die Grinders
(F)
2000 Hand-Held Non-Electric Power Tools Safety Requirements - Part 10: Compression
Power Tools (F)
2000 Hand-Held Non-Electric Power Tools Safety Requirements - Part 11: Nibblers and
Shears (F)
2000 Hand-Held Non-Electric Power Tools Safety Requirements - Part 12: Small
Circular, Small Oscillating and Reciprocating
Saws (F)
2000 Hand-Held Non-Electric Power tools Safety Requirements - Part 13: Fastener
Driving Tools (F)
1998 Particular Requirements for Safety of
Medical Supply Units (N)
1997 Lung Ventilators Part 2: Particular
Requirements for Home Care Use Also
Known as BS 5724: Section 2.203: 1997; (N)
1997 Amd 1 Lung Ventilators - Part 1:
Particular Requirements for Critical Care
Ventilators AMD 13084: July 2001;
Supersedes BS 5724-2.12:1990; Also Known
as BS 5724-2.202:1997;(N)
1997 Lung Ventilators Part 1: Particular
BS EN 794-3
BS EN 797
BS EN 797
BS EN 798
BS EN 799
BS EN 805
BS EN 812
BS EN 816
BS EN 800
BS EN 801
BS EN 809
BS EN 809
BS EN 810
BS EN 811
BS EN 813
BS EN 814-1
Requirements for Critical Care Ventilators
Also Known as BS 5724: Section 2.202:
1997; Supersedes BS 5724: Section 2.12:
1990; (N)
1999 Lung Ventilators - Part 3: Particular
Requirements for Emergency and Transport
Ventilators (N)
1996 Bar Coding - Symbology Specifications
- 'EAN/UPC' (S)
1996 Amd 1 Bar Coding - Symbology
Specifications - 'EAN/UPC' AMD 9425
March 15, 1997; (S)
1996 Bar Coding - Symbology Specifications
- 'Codabar' (S)
1996 Bar Coding - Symbology Specifications
- 'Code 128' (S)
2000 Water Supply - Requirements for
Systems and Components Outside Buildings
(R)
1998 Industrial Bump Caps Supersedes BS
4033: 1966; (N)
1997 Sanitary Tapware - Automatic Shut-Off
Valves PN 10 (R)
1996 Bar Coding - Symbology Specifications
- 'Code 39' (S)
1996 Bar Coding - Symbology Specifications
- 'Interleaved 2 of 5' (S)
1998 Pumps and Pump Units for Liquids Common Safety Requirements (Q)
1998 Corr 1 Pumps and Pump Units for
Liquids - Common Safety Requirements
CORR 13177: July 2001; (Q)
1997 Dehumidifiers with Electrically Driven
Compressors - Rating Tests, Marking,
Operational Requirements and Technical
Data Sheet (F)
1997 Safety of Machinery - Safety Distances
to Prevent Danger Zones Being Reached by
the Lower Limbs (F)
1997 Personal Protective Equipment for
Prevention of Falls from a Height - Sit
Harnesses (N)
1997 Air Conditioners and Heat Pumps with
Electrically Driven Compressors - Cooling
Mode Part 1: Terms, Definitions and
Designations (F)
BS EN 814-2
BS EN 814-3
BS EN 817
BS EN 818-6
BS EN 821-1
BS EN 845-2
BS EN 822
BS EN 826
BS EN 828
BS EN 829
BS EN 821-2
BS EN 832
BS EN 832
BS EN 836
1997 Air Conditioners and Heat Pumps with
Electrically Driven Compressors - Cooling
Mode Part 2: Testing and Requirements for
Marking (F)
1997 Air Conditioners and Heat Pumps with
Electrically Driven Compressors - Cooling
Mode Part 3. Requirements (F)
1998 Sanitary Tapware - Mechanical Mixers
(PN 10) - General Technical Specifications
(R)
2000 Short Link Chain for Lifting Purposes Safety - Part 6: Chain Slings - Specification
for Information for Use and Maintenance to
Be Provided by the Manufacturer (Q)
1995 Advanced Technical Ceramics Monolithic Ceramics - Thermo- Physical
Properties - Part 1: Determination of Thermal
Expansion (V)
2001 Ancillary Components for Masonry Part 2: Lintels (R)
1995 Thermal Insulating Products for
Building Applications - Determination of
Length and Width (F)
1996 Thermal Insulating Products for
Building Applications - Determination of
Compression Behaviour (R)
1998 Adhesives - Wettability - Determination
by Measurement of Contact Angle and
Critical Surface Tension of Solid Surface (W)
1997 In Vitro Diagnostic Systems - Transport
Packages for Medical and Biological
Specimens - Requirements, Tests (N)
1997 Advanced Technical Ceramics Monolithic Ceramics - Thermo- Physical
Properties - Part 2: Determination of Thermal
Diffusivity by the Laser Flash (or Heat Pulse)
Method Supersedes BS 7134: Section 4.2:
1990; (V)
2000 Thermal Performance of Buildings Calculation of Energy Use for Heating Residential Buildings (R)
2000 Corr 1 Thermal Performance of
Buildings - Calculation of Energy Use for
Heating - Residential Buildings CORR
11044:July 2001; (R)
1997 Amd 1 Garden Equipment - Powered
BS EN 836
BS EN 837-1
BS EN 837-2
BS EN 837-3
BS EN 838
BS EN 840-1
BS EN 840-2
BS EN 840-3
BS EN 840-4
BS EN 840-5
BS EN 840-5
BS EN 840-5
Lawnmowers - Safety AMD 13222:
November 28, 2001; Supersedes BS 5107:
1974; (L)
1997 Garden Equipment - Powered
Lawnmowers - Safety Supersedes BS 5107:
1974; (L)
1998 Pressure Gauges Part 1: Bourdon Tube
Pressure Gauges - Dimensions, Metrology,
Requirements and Testing Supersedes BS
1780: 1985; (H)
1998 Pressure Gauges Part 2: Selection and
Installation Recommendations for Pressure
Gauges (H)
1998 Pressure Gauges Part 3: Diaphragm and
Capsule Pressure Gauges - Dimensions,
Metrology, Requirements and Testing (H)
1996 Workplace Atmospheres - Diffusive
Samplers for the Determination of Gases and
Vapours - Requirements and Test Methods
(N)
1997 Mobile Waste Containers Part 1.
Containers with Two Wheels with a Capacity
from 80 l to 390 l for Comb Lifting Devices Dimensions and Design (H)
1997 Mobile Waste Containers Part 2.
Containers with Four Wheels with a Capacity
from 500 l to 1200 l with Flat Lid(s), for
Trunnion and/or Comb Lifting Devices Dimensions and Design (H)
1997 Mobile Waste Containers Part 3.
Containers with Four Wheels with a Capacity
from 770 l to 1300 l with Dome Lid(s) for
Trunnion and/or Comb Lifting Devices Dimensions and Design (H)
1997 Mobile Waste Containers Part 4.
Containers with Four Wheels with a Capacity
from 750 l to 1700 l with Flat Lid(s), for
Wide Trunnion or BG-and/or Wide Comb
Lifting Devices - Dimensions and Design (H)
1997 Amd 1 Mobile Waste Containers Part 5:
Performance Requirements and Test Methods
AMD 13330: February 6, 2002;(H)
1997 Mobile Waste Containers Part 5:
Performance Requirements and Test Methods
(H)
1997 Mobile Waste Containers Part 5:
BS EN 840-6
BS EN 840-6
BS EN 841
BS EN 843-1
BS EN 844-2
BS EN 844-2
BS EN 844-4
BS EN 844-5
BS EN 844-5
BS EN 844-6
BS EN 844-7
BS EN 844-8
BS EN 844-9
BS EN 845-1
BS EN 845-3
Performance Requirements and Test Methods
(H)
1997 Mobile Waste Containers Part 6: Safety
and Health Requirements (H)
1997 Amd 1 Mobile Waste Containers Part 6:
Safety and Health Requirements AMD
12080: May 2001; (H)
1996 Bar Coding - Symbology Specifications
- Format Description (S)
1995 Advanced Technical Ceramics Monolithic Ceramics - Mechanical Properties
at Room Temperature Part 1: Determination
of Flexural Strength (V)
1997 Round and Sawn Timber - Terminology
Part 2: General Terms Relating to Round
Timber (G)
1997 Amd 1 Round and Sawn Timber Terminology Part 2: General Terms Relating
to Round Timber AMD 9895; February 15,
1998; (G)
1997 Round and Sawn Timber - Terminology
Part 4: Terms Relating to Moisture Content
(G)
1997 Round and Sawn Timber - Terminology
Part 5: Terms Relating to Dimensions of
Round Timber (G)
1997 Amd 1 Round and Sawn Timber Terminology Part 5: Terms Relating to
Dimensions of Round Timber AMD 9896;
February 15, 1998; (G)
1997 Round and Sawn Timber - Terminology
Part 6: Terms Relating to Dimensions of
Sawn Timber (G)
1997 Round and Sawn Timber - Terminology
Part 7: Terms Relating to Anatomical
Structure of Timber (G)
1997 Round and Sawn Timber - Terminology
Part 8: Terms Relating to Features of Round
Timber (G)
1997 Round and Sawn Timber - Terminology
Part 9: Terms Relating to Features of Sawn
Timber (G)
2001 Ancillary Components for Masonry Part 1: Ties, Tension Straps, Hangers and
Brackets (R)
2001 Ancillary Components for Masonry -
BS EN 846-2
BS EN 846-3
BS EN 866-4
BS EN 846-5
BS EN 846-6
BS EN 846-7
BS EN 846-8
BS EN 846-8
BS EN 846-9
Part 3: Bed Joint Reinforcement of Steel
Meshwork (R)
2000 Methods of Test for Ancillary
Components for Masonry - Part 2:
Determination of Bond Strength of
Prefabricated Bed Joint Reinforcement in
Mortar Joints (R)
2000 Methods of Test for Ancillary
Components for Masonry - Part 3:
Determination of Shear Load Capacity of
Welds in Prefabricated Bed Joint
Reinforcement (R)
2000 Biological Systems for Testing
Sterilizers and Sterilization Processes - Part
4: Particular Systems for Use in Irradiation
Sterilizers (N)
2000 Methods of Test for Ancillary
Components for Masonry - Part 5:
Determination of Tensile and Compressive
Load Capacity and Load Displacement
Characteristics of Wall Ties (Couplet Test)
(R)
2000 Methods of Test for Ancillary
Components for Masonry - Part 6:
Determination of Tensile and Compressive
Load Capacity and Load and Load
Displacement Characteristics of Wall Ties
(Single End Test) (R)
2000 Methods of Test for Ancillary
Components for Masonry - Part 7:
Determination of Shear Load Capacity and
Load Displacement Characteristics of Shear
Ties and Slip Ties (Couplet Test for Mortar
Joint Connection) (R)
2000 Methods of Test for Ancillary
Components for Masonry - Part 8:
Determination of Load Capacity and LoadDeflection Characteristics of Joist Hangers
(R)
2000 Corr 1 Methods of Test for Ancillary
Components for Masonry - Part 8:
Determination of Load Capacity and LoadDeflection Characteristics of Joist Hangers
CORR 11024; July 2000; (R)
2000 Methods of Test for Ancillary
Components for Masonry - Part 9:
BS EN 846-10
BS EN 846-11
BS EN 847-1
BS EN 413-2
BS EN 352-3
BS EN 352-4
BS EN 356
BS EN 357
BS EN 371
BS EN 377
BS EN 377
BS EN 378-2
Determination of Flexural Resistance and
Shear Resistance of Lintels (R)
2000 Methods of Test for Ancillary
Components for Masonry - Part 10:
Determination of Load Capacity and Load
Deflection Characteristics of Brackets (R)
2000 Methods of Test for Ancillary
Components for Masonry - Part 11:
Determination of Dimension and Bow of
Lintels (R)
1997 Tools for Woodworking - Safety
Requirements Part 1: Milling Tools and
Circular Saw Blades (F)
1995 Masonry Cement Part 2: Test Methods
(R)
1997 Hearing Protectors - Safety
Requirements and Testing Part 3: Ear-Muffs
Attached to an Industrial Safety Helmet (N)
2001 Hearing Protectors - Safety
Requirements and Testing - Part 4: LevelDependent Ear-Muffs (N)
2000 Glass in Building - Security Glazing Testing and Classification of Resistance
Against Manual Attack (R)
2000 Glass in Building - Fire Resistant
Glazed Elements with Transparent or
Translucent Glass Products - Classification of
Fire Resistance (R)
1992 AX Gas Filters and Combined Filters
Against Low Boiling Organic Compounds
Used in Respiratory Protective Equipment
(Replaces BS 2091: 1969)
1993 Lubricants for Applications in
Appliances and Associated Controls Using
Combustible Gases Except Those Designed
for Use in Industrial Processes (W)
1993 Amd 1 Lubricants for Applications in
Appliances and Associated Controls Using
Combustible Gases Except Those Designed
for Use in Industrial Processes AMD 9328;
December 15, 1996 (W)
2000 Refrigerating Systems and Heat Pumps
- Safety and Environmental Requirements Part 2: Design, Construction, Testing,
Marking and Documentation Together with
BS EN 378-1, BS EN 378-3 and BS EN 378-
BS EN 378-3
BS EN 378-4
BS EN 381-3
BS EN 381-8
BS EN 381-9
BS EN 387
BS EN 415-1
BS EN 415-2
BS EN 415-3
BS EN 442-3
BS EN 415-4
BS EN 416-1
BS EN 416-1
4: 2000 Supersedes BS 4434: 1995; (F)
2000 Refrigerating Systems and Heat Pumps
- Safety and Environmental Requirements Part 3: Installation Site and Personal
Protection Together with BS EN 378-1, BS
EN 378-2, and BS EN 378-4: 2000
Supersedes BS 4434: 1995; (F)
2000 Refrigerating Systems and Heat Pumps
- Safety and Environmental Requirements Part 4: Operation, Maintenance, Repair and
Recovery Together with BS EN 378-1, BS
EN 378-2, and BS EN 378-3: 2000
Supersedes BS 4434: 1995; (F)
1996 Protective Clothing for Users of HandHeld Chain Saws Part 3: Test Methods for
Footwear (N)
1997 Protective Clothing for Users of HandHeld Chain Saws Part 8: Test Methods for
Chain Saw Protective Gaiters (N)
1997 Protective Clothing for Users of HandHeld Chain Saws Part 9: Requirements for
Chain Saw Protective Gaiters (N)
2001 Glued Laminated Timber - Large
Finger Joints - Performance Requirements
and Minimum Production Requirements
Supersedes DD ENV 387: 1999; (V)
2000 Packaging Machines Safety - Part 1:
Terminology and Classification of Packaging
Machines and Associated Equipment (Q)
2000 Safety of Packaging Machines - Part 2:
Pre-Formed Rigid Container Packaging
Machines (H)
2000 Safety of Packaging Machines - Part 3:
Form, Fill and Seal Machines (H)
1997 Radiators and Convectors Part 3:
Evaluation of Conformity (R)
1998 Safety of Packaging Machines Part 4:
Palletizers and Depalletizers (H)
1999 Single Burner Gas-Fired Overhead
Radiant-Tube Heaters - Part 1: Safety
Supersedes BS 7186:1989; (F)
1999 Amd 2 Single Burner Gas-Fired
Overhead Radiant Tube Heaters for NonDomestic Use - Part 1: Safety AMD
13383:February 7,2002; Supersedes BS
7186:1989; (F)
BS EN 416-1
BS EN 419-1
BS EN 419-1
BS EN 419-1
BS EN 435
BS EN 436
BS EN 438 PART 1
BS EN 438 PART 2
BS EN 441-5
BS EN 441- 10
BS EN 441-12
BS EN 443
BS EN 444
BS EN 445
BS EN 446
BS EN 453
1999 Amd 1 Single Burner Gas-Fired
Overhead Radiant Tube Heaters for NonDomestic Use - Part 1: Safety AMD 13009:
June 2001; Supersedes BS 7186:1989; (F)
2000 Non-Domestic Gas-Fired Overhead
Luminous Radiant Heaters - Part 1: Safety
Supersedes BS 3561: 1962; (F)
2000 Amd 1 Non-Domestic Gas-Fired
Overhead Luminous Radiant Heaters - Part 1:
Safety AMD 13010:May 2001; Supersedes
BS 3561: 1962; (F)
2000 Amd 2 Non-Domestic Gas-Fired
Overhead Luminous Radiant Heaters - Part 1:
Safety AMD 13382: October 31, 2001;
Supersedes BS 3561:1962; (F)
1994 Resilient Floor Coverings Determination of Flexibility (R)
1994 Resilient Floor Coverings Determination of Density (R)
1991 Decorative High-Pressure Laminates
(HPL) - Sheets Based on Thermosetting
Resins Part 1: Specifications (Supersedes BS
3794: Part 1: 1986) (R)
1991 Decorative High-Pressure Laminates
(HPL) - Sheets Based on Thermosetting
Resins Part 2: Determination of Properties
(Replaces BS 3794: Part 2: 1986)
1996 Refrigerated Display Cabinets Part 5:
Temperature Test (F)
1995 Refrigerated Display Cabinets Part 10:
Test for Absence of Odour and Taste (F)
1997 Refrigerated Display Cabinets Part 12:
Measurement of the Heat Extraction Rate of
the Cabinets When the Condensing Unit is
Remote from the Cabinet (F)
1997 Helmets for Firefighters Supersedes BS
3864: 1989; (N)
1994 Non-Destructive Testing - General
Principles for Radiographic Examination of
Metallic Materials by X- and Gamma-Rays
(Q)
1997 Grout for Prestressing Tendons - Test
Methods (R)
1997 Grout for Prestressing Tendons Grouting Procedures (R)
2000 Food Processing Machinery - Dough
BS EN 459-2
BS EN 445
BS EN 447
BS EN 449
BS EN 449
BS EN 450
BS EN 451-2
BS EN 454
BS EN 455-3
BS EN 461
BS EN 462-5
BS EN 469
BS EN 469
Mixers - Safety and Hygiene Requirements
(F)
1995 Building Lime Part 2: Test Methods (R)
1997 Amd 1 Grout for Prestressing Tendons Test Methods AMD 9876; December 15,
1997; (R)
1997 Grout for Prestressing Tendons Specification for Common Grout (R)
1997 Dedicated Liquefied Petroleum Gas
Appliances - Domestic Flueless Space
Heaters (Including Diffusive Catalytic
Combustion Heaters) (L)
1997 Amd 1 Dedicated Liquefied Petroleum
Gas Appliances - Domestic Flueless Space
Heaters (Including Diffusive Catalytic
Combustion Heaters) AMD 9833; December
1997; Supersedes BS 5258: Part 10: and BS
5258: Part 11; (L)
1995 Fly Ash for Concrete - Definitions,
Requirements and Quality Control (R)
1995 Method of Testing Fly Ash Part 2:
Determination of Fineness by Wet Sieving
(R)
2000 Food Processing Machinery - Planetary
Mixers - Safety and Hygiene Requirements
(F)
2000 Medical Gloves for Single Use - Part 3:
Requirements and Testing for Biological
Evaluation Together with BS EN 455-1 and 2, Supersedes BS 4005: 1996; (N)
1999 Specification for Dedicated Liquefied
Petroleum Gas Appliances - Flueless NonDomestic Space Heaters Not Exceeding 10
kW (F)
1996 Non-Destructive Testing - Image
Quality of Radiographs Part 5: Image Quality
Indicators (Duplex Wire Type),
Determination of Image Unsharpness Value
(F)
1995 Protective Clothing for Firefighters Requirements and Test Methods for
Protective Clothing for Firefighting
(Replaces 547: 1959) (Q)
1995 Amd 1 Protective Clothing for
Firefighters - Requirements and Test
Methods for Protective Clothing for
BS EN 462 PART 3
BS EN 476
BS EN 477
BS EN 478
CP 3000
BS EN 410
BS EN 479
BS EN 480-1
BS EN 480-2
BS EN 480-4
BS EN 480-5
BS EN 480-6
BS EN 480-8
Firefighting (AMD 9210) October 15, 1996
(Q)
1997 Non-Destructive Testing - Image
Quality of Radiographs Part 3: Image Quality
Classes for Ferrous Metals BS EN 462-3:
1996 Together with BS EN 462-1: 1994, BS
EN 462-2: 1994 and BS EN 462-5: 1996,
Supersedes BS 3971: 1980; (F)
1998 General Requirements for Components
Used in Discharge Pipes, Drains and Sewers
for Gravity Systems (R)
1999 Unplasticized Polyvinylchloride (PVCU) Profiles for the Fabrication of Windows
and Doors - Determination of the Resistance
to Impact of Main Profiles by Falling Mass
(V)
1999 Unplasticized Polyvinylchloride (PVCU) Profiles for the Fabrication of Windows
and Doors - Appearance After Exposure at
150 Degrees Celsius - Test Method (V)
1955 Installation and Maintenance of
Underfeed Stokers (Replaces BS 749: 1952)
1998 Glass in Building - Determination of
Luminous and Solar Characteristics of
Glazing (R)
1999 Unplasticized Polyvinylchloride (PVCU) Profiles for the Fabrication of Windows
and Doors - Determination of Heat Reversion
(V)
1998 Admixtures for Concrete, Mortar and
Grout - Test Methods Part 1: Reference
Concrete and Reference Mortar for Testing
(R)
1997 Admixtures for Concrete, Mortar and
Grout - Test Methods Part 2: Determination
of Setting Time (R)
1997 Admixtures for Concrete, Mortar and
Grout - Test Methods Part 4: Determination
of Bleeding of Concrete (R)
1997 Admixtures for Concrete, Mortar and
Grout - Test Methods Part 5: Determination
of Capillary Absorption (R)
1997 Admixtures for Concrete, Mortar and
Grout - Test Methods Part 6: Infrared
Analysis (R)
1997 Admixtures for Concrete, Mortar and
BS EN 480-10
BS EN 480-11
BS EN 480-12
BS EN 483
BS EN 483
BS EN 484
BS EN 491
BS EN 492
BS EN 494
BS EN 509
BS EN 488
BS EN 489
Grout - Test Methods Part 8: Determination
of the Conventional Dry Material Content
(R)
1997 Admixtures for Concrete, Mortar and
Grout - Test Methods Part 10: Determination
of Water Soluble Chloride Content (R)
1999 Admixtures for Concrete, Mortar and
Grout - Test Methods - Part 11:
Determination of Air Void Characteristics in
Hardened Concrete (R)
1998 Admixtures for Concrete, Mortar and
Grout - Test Methods Part 12: Determination
of the Alkali Content of Admixtures (R)
2000 Amd 1 Gas-Fired Central Heating
Boilers - Type C Boilers of Nominal Heat
Input Not Exceeding 70 kW AMD
13369:February 13,2002; Partially
Supersedes BS 5258-1:1986; BS 63321:1988; (R)
2000 Gas-Fired Central Heating Boilers Type C Boilers of Nominal Heat Input Not
Exceeding 70 kW Partially Supersedes BS
5258-1:1986; BS 6332-1:1988; (R)
1998 Dedicated Liquefied Petroleum Gas
Appliances - Independent Hotplates,
Including Those Incorporating a Grill for
Outdoor Use (L)
1994 Concrete Roofing Tiles and Fittings Test Methods (Partially Replaces BS
473,500: 1990) (R)
1994 Fibre-Cement Slates and Their Fittings
for Roofing - Product Specification and Test
Methods (Replaces BS 690: Part 4: 1974) (R)
1994 Fibre-Cement Profiled Sheets and
Fittings for Roofing - Product Specification
and Test Methods (Replaces BS 690: Part 3:
1973) (R)
2000 Decorative Fuel-Effect Gas Appliances
Supersedes BS 5258-12:1990 (L)
1995 Preinsulated Bonded Pipe Systems for
Underground Hot Water Networks - Steel
Valve Assembly for Steel Service Pipes,
Polyurethane Thermal Insulation and Outer
Casing of Polyethylene (E)
1995 Preinsulated Bonded Pipe Systems for
Underground Hot Water Networks - Joint
BS EN 492
BS EN 492
BS EN 492
BS EN 492
BS EN 494
BS EN 534
BS EN 494
BS EN 494
BS EN 494
BS EN 497
BS EN 498
Assembly for Steel Service Pipes,
Polyurethane Thermal Insulation and Outer
Casing of Polyethylene (E)
1994 Amd 1 Fibre-Cement Slates and Their
Fittings for Roofing - Product Specification
and Test Methods (AMD 8534) May 15,
1995 (Replaces BS 690: Part 4: 1974) (R)
1994 Amd 2 Fibre-Cement Slates and Their
Fittings for Roofing - Product Specification
and Test Methods (AMD 8861) October 15,
1995 (Replaces BS 690: Part 4: 1974) (R)
1994 Amd 3 Fibre-Cement Slates and Their
Fittings for Roofing - Product Specification
and Test Methods AMD 9538; August, 1997;
Supersedes BS 690: Part 4: 1974; (R)
1994 Amd 4 Fibre-Cement Slates and Their
Fittings for Roofing - Product Specification
and Test Methods AMD 10402; January,
2000; Supersedes BS 690: Part 4: 1974;
Section Three of BS 4624:1981; (R)
1994 Amd 1 Fibre-Cement Profiled Sheets
and Fittings for Roofing - Product
Specification and Test Methods (AMD 8535)
May 15, 1995 (Replaces BS 690: Part 3:
1973) (R)
1998 Corrugated Bitumen Sheets (R)
1994 Amd 2 Fibre-Cement Profiled Sheets
and Fittings for Roofing - Product
Specification and Test Methods (AMD 8862)
October 15, 1995 (Replaces BS 690: Part 3:
1973) (R)
1994 Amd 3 Fibre-Cement Profiled Sheets
and Fittings for Roofing - Product
Specification and Test Methods AMD 9537;
August, 1997; Supersedes BS 690: Part 3:
1973; (R)
1994 Amd 4 Fibre-Cement Profiled Sheets
and Fittings for Roofing - Product
Specification and Test Methods AMD 10403;
January, 2000; Supersedes BS 690: Part 3:
1973; Incorporating Amendments Nos 1,2,3
and 4;(R)
1998 Dedicated Liquefied Petroleum Gas
Appliances - Multi-Purpose Boiling Burners
for Outdoor Use (L)
1998 Dedicated Liquefied Petroleum Gas
BS EN 500-1
BS EN 500-2
BS EN 500-3
BS EN 500-4
BS EN 501
BS EN 502
BS EN 504
BS EN 505
BS EN 506
BS EN 507
BS EN 508-1
BS EN 508-2
BS EN 508-3
BS EN 513
Appliances - Barbecues for Outdoor Use
Supersedes BS 5258: Part 14: 1984; (L)
1996 Mobile Road Construction Machinery Safety Part 1: Common Requirements (R)
1996 Mobile Road Construction Machinery Safety Part 2: Specific Requirements for
Road- Milling Machines (R)
1996 Mobile Road Construction Machinery Safety Part 3: Specific Requirements for Soil
Stabilization Machines (R)
1996 Mobile Road Construction Machinery Safety Part 4: Specific Requirements for
Compaction Machines (R)
1994 Roofing Products from Metal Sheet Specification for Fully Supported Roofing
Products of Zinc Sheet (R)
2000 Roofing Products from Metal Sheets Specification for Fully Supported Products of
Stainless Steel Sheet (R)
2000 Roofing Products from Metal Sheets Specification for Fully Supported Roofing
Products of Copper Sheet (R)
2000 Roofing Products from Metal Sheets Specification for Fully Supported Roofing
Products of Steel Sheet (R)
2000 Roofing Products from Metal Sheet Specification for Self-Supporting Products of
Copper or Zinc Sheet (R)
2000 Roofing Products from Metal Sheets Specification for Fully Supported Roofing
Products of Aluminium Sheet (R)
2000 Roofing Products from Metal Sheet Specification for Self-Supporting Products of
Steel, Aluminium or Stainless Steel Sheet Part 1: Steel (R)
2000 Roofing Products from Metal Sheet Specification for Self-Supporting Products of
Steel, Aluminium or Stainless Steel Sheet Part 2: Aluminium (R)
2000 Roofing Products from Metal Sheet Specification for Self-Supporting Products of
Steel, Aluminium or Stainless Steel Sheet Part 3: Stainless Steel (R)
1999 Unplasticized Polyvinylchloride (PVCU) Profiles for the Fabrication of Windows
and Doors - Determination of the Resistance
BS EN 514
BS EN 517
BS EN 521
BS EN 523
BS EN 524-1
BS EN 524-2
BS EN 524-3
BS EN 524-4
BS EN 524-5
BS EN 524-6
BS EN 525
BS EN 527-1
BS EN 533
to Artificial Weathering (V)
2000 Unplasticized Polyvinylchloride (PVCU) Profiles for the Fabrication of Windows
and Doors - Determination of the Strength of
Welded Corners and T-Joints Supersedes BS
7413:1991; (V)
1995 Prefabricated Accessories for Roofing Roof Safety Hooks (R)
1998 Dedicated Liquefied Petroleum Gas
Appliances - Portable Vapour Pressure
Liquefied Petroleum Gas Appliances CORR
10104; July 1998; (E)
1997 Steel Strip Sheaths for Prestressing
Tendons - Terminology, Requirements
Quality Control (R)
1997 Steel Strip Sheaths for Prestressing
Tendons - Test Methods Part 1:
Determination of Shape and Dimensions (R)
1997 Steel Strip Sheaths for Prestressing
Tendons - Test Methods Part 2:
Determination of Flexural Behaviour (R)
1997 Steel Strip Sheaths for Prestressing
Tendons - Test Methods Part 3: To-and-Fro
Bending Test (R)
1997 Steel Strip Sheaths for Prestressing
Tendons - Test Methods Part 4:
Determination of Lateral Load Resistance (R)
1997 Steel Strip Sheaths for Prestressing
Tendons - Test Methods Part 5:
Determination of Tensile Load Resistance
(R)
1997 Steel Strip Sheaths for Prestressing
Tendons - Test Methods Part 6:
Determination of Leaktightness
(Determination of Water Loss) (R)
1998 Non-Domestic Direct Gas-Fired Forced
Convection Air Heaters for Space Heating
Not Exceeding a Net Heat Input of 300 kW
Partially Supersedes BS 5990: 1990; (F)
2000 Office Furniture - Work Tables and
Desks - Part 1: Dimensions Supersedes BS
5940-1: 1980; (L)
1997 Protective Clothing - Protection Against
Heat and Flame - Limited Flame Spread
Materials and Material Assemblies
Supersedes BS 6249: Part 1: 1982; (N)
BS EN 538
BS EN 539-1
BS EN 556-1
BS EN 590
BS EN 539-2
BS EN 544
BS EN 546-1
BS EN 546-2
BS EN 546-3
BS EN 546-4
BS EN 547-1
BS EN 547-2
BS EN 547-3
BS EN 548
BS EN 562
1994 Clay Roofing Tiles for Discontinuous
Laying - Flexural Strength Test (Partially
Replaces BS 402: Part 1: 1990) (R)
1994 Clay Roofing Tiles for Discontinuous
Laying - Determination of Physical
Characteristics Part 1: Impermeability Test
(R)
2001 Sterilization of Medical Devices Requirements for Medical Devices to Be
Designated
2000 Automotive Fuels - Diesel Requirements and Test Methods (W)
1998 Clay Roofing Tiles for Discontinuous
Laying - Determination of Physical
Characteristics - Part 2: Test for Frost
Resistance (R)
1998 Bitumen Shingles with Mineral and/or
Synthetic Reinforcements (R)
1997 Aluminium and Aluminium Alloys Foil - Part 1: Techinical Conditions for
Inspection and Delivery (V)
1997 Aluminium and Aluminium Alloys Foil - Part 2: Mechanical Properties (V)
1997 Aluminium and Aluminium Alloys Foil Part 3: Tolerances on Dimensions (V)
1997 Aluminium and Aluminium Alloys Foil Part 4: Special Property Requirements
(V)
1997 Safety of Machinery - Human Body
Measurements Part 1: Principles for
Determining the Dimensions Required for
Openings for Whole Body Access into
Machinery (F)
1997 Safety of Machinery - Human Body
Measurements Part 2: Principles for
Determining the Dimensions Required for
Access Openings (F)
1997 Safety of Machinery - Human Body
Measurements Part 3: Anthropometric Data
(F)
1997 Resilient Floor Coverings Specification for Plain and Decorative
Linoleum (R)
1995 Gas Welding Equipment - Pressure
Gauges Used in Welding, Cutting and Allied
Processes (Replaces BS 6752: 1986) (F)
BS EN 562
BS EN 562
BS EN 570
BS EN 571-1
BS EN 574
BS EN 575
BS EN 576
BS EN 577
BS EN 581-1
BS EN 581-3
BS EN 582
BS EN 583-1
BS EN 583-3
BS EN 584-2
BS EN 586-1
1995 Amd 1 Gas Welding Equipment Pressure Gauges Used in Welding, Cutting
and Allied Processes (AMD 8801) September
15, 1995 (Replaces BS 6752: 1986) (F)
1995 Amd 2 Gas Welding Equipment Pressure Gauges Used in Welding, Cutting
and Allied Processes (AMD 9209) October
15, 1996 (F)
1995 Aluminium and Aluminium Alloys Impact Extrusion Slugs Obtained From
Wrought Products - Specifications (V)
1997 Non-Destructive Testing - Penetrant
Testing Part 1: General Principles Supersedes
BS 6443: 1984; (F)
1997 Safety of Machinery - Two-Hand
Control Devices - Functional Aspects Principles for Design (F)
1996 Aluminium and Aluminium Alloys Master Alloys Produced by Melting Specifications (V)
1996 Aluminium and Aluminium Alloys Unalloyed Aluminium Ingots for Remelting Specifications (V)
1996 Aluminium and Aluminium Alloys Liquid Metal - Specifications (V)
1997 Outdoor Furniture - Seating and Tables
for Camping, Domestic and Contract Use
Part 1: General Safety Requirements (L)
1999 Outdoor Furniture - Seating and Tables
for Camping, Domestic and Contract Use Part 3: Mechanical Safety Requirements and
Test Methods for Tables (L)
1994 Thermal Spraying - Determination of
Tensile Adhesive Strength (F)
1999 Non-Destructive Testing - Ultrasonic
Examination - Part 1: General Principles (F)
1997 Non-Destructive Testing - Ultrasonic
Examination Part 3: Transmission Technique
(F)
1997 Non-Destructive Testing - Industrial
Radiographic Film Part 2: Control of Film
Processing by Means of Reference Values
(H)
1998 Aluminium and Aluminium Alloys Forgings Part 1: Technical Conditions for
Inspection and Delivery (V)
BS EN 590
BS EN 590
BS EN 593
BS EN 593
BS EN 594
BS EN 600
BS EN 610
BS EN 603-1
BS EN 603-2
BS EN 603-3
BS EN 604-1
BS EN 693
BS EN 695
BS EN 604-2
BS EN 607
BS EN 609-1
1999 Automotive Fuels - Diesel Requirements and Test Methods (W)
1993 Automotive Diesel Fuel Supersedes BS
2869: Part 1: 1988; (W)
1998 Industrial Valves - Metallic Butterfly
Valves Supersedes BS 5155: 1984 (1991);
(F)
1998 Amd 1 Industrial Valves - Metallic
Butterfly Valves AMD 10969 October 2000;
Supersedes BS 5155:1984 (1991); (F)
1996 Timber Structures - Test Methods Racking Strength and Stiffness of Timber
Frame Wall Panels (R)
1996 Natural Rubber Latex Male Condoms
(N)
1996 Tin and Tin Alloys - Ingot Tin (V)
1997 Aluminium and Aluminium Alloys Wrought Forging Stock Part 1: Technical
Conditions for Inspection and Delivery
Partially Supersedes BS 1472: 1972; (V)
1997 Aluminium and Aluminium Alloys Wrought Forging Stock Part 2: Mechanical
Properties Partially Supersedes BS 1472:
1972; (V)
2000 Aluminium and Aluminium Alloys Wrought Forging Stock - Part 3: Tolerances
on Dimensions and Form Supersedes BS
4300-11:1969; (V)
1997 Aluminium and Aluminium Alloys Cast Forging Stock Part 1: Technical
Conditions for Inspection and Delivery
Replaces Some Sections of BS 1472: 1972;
(V)
2001 Machine Tools - Safety - Hydraulic
Presses (F)
1997 Kitchen Sinks - Connecting Dimensions
(L)
1997 Aluminium and Aluminium Alloys Cast Forging Stock Part 2: Tolerances on
Dimensions and Form (V)
1996 Eaves Gutters and Fittings Made of
PVC-U - Definitions, Requirements and
Testing (Partially Replaces BS 4576-1: 1989)
(R)
1999 Agricultural and Forestry Machinery Safety of Log Splitters - Part 1: Wedge
BS EN 609-2
BS EN 611-2
BS EN 612
BS EN 612
BS EN 614-2
BS EN 617
BS EN 621
BS EN 622-1
BS EN 622-2
BS EN 622-3
BS EN 622-4
BS EN 622-5
BS EN 623-1
Splitters (E)
2000 Agricultural and Forestry Machinery Saftey of Log Splitters - Part 2: Screw
Splitters (E)
1997 Tin and Tin Alloys - Pewter and
Pewterware Part 2: Pewterware BS EN 611:
Part 2: 1997, Together with BS EN 611: Part
1: 1996, Supersedes BS 5140: 1974;(V)
1996 Eaves Gutters and Rainwater DownPipes of Metal Sheet - Definitions,
Classifications and Requirements (R)
1996 Amd 1 Eaves Gutters and Rainwater
Down-Pipes of Metal Sheet - Definitions,
Classifications and Requirements AMD
9493; July 15, 1997; (R)
2000 Safety of Machinery - Ergonomic
Design Principles - Part 2: Interactions
Between the Design of Machinery and Work
Tasks (F)
2001 Continuous Handling Equipment and
Systems - Safety and EMC Requirements for
the Equipment for the Storage of Bulk
Materials in Silos, Bunkers, Bins and
Hoppers (Q)
1998 Non-Domestic Gas-Fired Forced
Convection Air Heaters for Space Heating
Not Exceeding a Net Heat Input of 300 kW,
without a Fan to Assist Transportation of
Combustion Air and/or Combustion Products
(R)
1997 Fibreboards - Specifications Part 1:
General Requirements (R)
1997 Fibreboards - Specifications Part 2:
Requirements for Hardboards (R)
1997 Fibreboards - Specifications Part 3:
Requirements for Medium Boards (R)
1997 Fibreboards - Specifications Part 4:
Requirements for Softboards (R)
1997 Fibreboards - Specifications Part 5:
Requirements for Dry Process Boards (MDF)
(R)
1995 Advanced Technical Ceramics Monolithic Ceramics General and Textural
Properties Part 1: Determination of the
Presence of Defects by Dye Penetration Tests
(Replaces BS 7134: Part 1: Section 1.1:
BS EN 623-2
BS EN 623-3
BS EN 624
BS EN 952
BS EN 626-2
BS EN 632
BS EN 635-5
BS EN 636-1
BS EN 636-2
BS EN 636-3
BS EN 649
BS EN 650
1989) (V)
1993 Advanced Technical Ceramics Monolithic Ceramics - General and Textural
Properties Part 2: Determination of Density
and Porosity (Supersedes BS 7134: Section
1.2: 1989) (Replaces BS 7134: Part 1:
Section 1.2: 1989) (V)
2001 Advanced Technical Ceramics Monolithic Ceramics - General and Textural
Properties - Part 3: Determination of Grain
Size and Size Distribution (Characterized by
the Liner Intercept Method) Supersedes DD
ENV 623-3:1993; (V)
2000 Specification for Dedicated LPG
Appliances - Room Sealed LPG Space
Heating Equipment for Installation in
Vehicles and Boats (E)
1999 Door Leaves - General and Local
Flatness - Measurement Method (R)
1996 Safety of Machinery - Reduction of
Risk to Health from Hazardous Substances
Emitted by Machinery Part 2: Methodology
Leading to Verification Procedures (F)
1996 Agricultural Machinery - Combine
Harvesters and Forage Harvesters - Safety
(E)
1999 Plywood - Classification by Surface
Appearance - Part 5: Methods for Measuring
and Expressing Characteristics and Defects
(V)
1997 Plywood - Specifications Part 1:
Requirements for Plywood for Use in Dry
Conditions (V)
1997 Plywood - Specifications Part 2:
Requirements for Plywood for Use in Humid
Conditions (V)
1997 Plywood - Specifications Part 3:
Requirements for Plywood for Use in
Exterior Conditions (V)
1997 Resilient Floor Coverings Homogeneous and Heterogeneous Polyvinyl
Chloride Floor Coverings - Specification
Supersedes BS 2592: 1973 and BS 3261: Part
1: 1973; (R)
1997 Resilient Floor Coverings - Polyvinyl
Chloride Floor Coverings on Jute Backing or
BS EN 651
BS EN 651
BS EN 652
BS EN 653
BS EN 654
BS MA 2 PART 1
BS MA 2 PART 4
BS MA 2 PART 8
BS MA 12 PART 1
BS MA 12 PART 2
BS MA 39 PART 1
BS MA 39 PART 2
BS MA 39 PART 3
BS MA 40 PART 1
BS MA 40 PART 2
on Polyester Felt Backing or on Poyester Felt
with Polyvinyl Chloride Backing Specification Supersedes BS 5085: Part 1:
1974; (R)
1997 Resilient Floor Coverings - Polyvinyl
Chloride Floor Coverings with Foam Layer Specification Supersedes BS 5085: Part 2:
1976; (R)
1997 Amd 1 Resilient Floor Coverings Polyvinyl Chloride Floor Coverings with
Foam Layer - Specification Supersedes BS
5085: Part 2: 1976; IAMD 9682; October
1997; (R)
1997 Resilient Floor Coverings - Polyvinyl
Chloride Floor Coverings with Cork-Based
Backing - Specification (R)
1997 Resilient Floor Coverings - Expanded
(Cushioned) Polyvinyl Chloride Floor
Coverings - Specification (L)
1997 Resilient Floor Coverings - SemiFlexible Polyvinyl Chloride Tiles Specification Supersedes BS 3260: 1969; (R)
1985 Magnetic Compasses and Binnacles
Part 1: Class A Magnetic Compasses, Their
Binnacles and Azimuth Reading Devices
(Including Test Procedures)
1985 Magnetic Compasses and Binnacles
Part 4: Glossary of Terms
1985 Magnetic Compasses and Binnacles
Part 8: Transmitting Systems and Off-Course
Alarms for Class A Magnetic Compasses
(OBSOLESCENT) 1983 Welded Steel
Bollards Part 1: Vertical Type
(OBSOLESCENT) 1983 Welded Steel
Bollards Part 2: Cruciform Type
(OBSOLESCENT) 1973 Ships' Ladders Part
1: Ladders, Steel Vertical
(OBSOLESCENT) 1973 Ships' Ladders Part
2: Ladders, Steel Sloping
(OBSOLESCENT) 1973 Amd 1 Ships'
Ladders Part 3: Ladders, Steel Dog-Step
(OBSOLESCENT) 1975 Marine Guardrails,
Stanchions, Etc Part 1: Guardrails for
Merchant Ships (Excluding Passenger Ships)
(OBSOLESCENT) 1975 Marine Guardrails,
Stanchions, Etc Part 2: Gates and Portable
BS MA 40 PART 3
BS MA 70 PART 1
BS MA 74 PART 2
BS MA 75 PART 1
BS MA 75 PART 2
BS MA 87 PART 1
BS MA 87 PART 2
BS MA 87 PART 3
BS MA 98 PART 1
BS MA 99 PART 1
BS MA 104 PART 1
BS MA 105 PART 1
BS MA 105 PART 2
BS MA 105 PART 3
BS EN 80
BS EN 35
Guardrail Sections for Merchant Ships
(Excluding Passenger Ships)
(OBSOLESCENT) 1975 Marine Guardrails,
Stanchions, Etc Part 3: Stormrails (Exterior)
(OBSOLESCENT) 1975 Amd 1 Dimensions
of Anchor Chain Cables Part 1: Stud Link
Anchor Chain Cables (Replaces BS 3006:
1949)
(OBSOLESCENT) 1981 Tapers and Other
Outboard Details of Propeller Shafts Part 2:
Shafts of Diameter Greater Than 160 mm up
to 1000 mm
(OBSOLESCENT) 1985 Bulkhead Pieces
and Tank Pads Part 1: Bulkhead Pieces of
Fabricated Steel or Copper Alloy and Steel
Pad Pieces
(OBSOLESCENT) 1978 Bulkhead Pieces
and Tank Pads Part 2: Bulkhead Pieces of
Ductile Iron (Spheroidal Graphite Iron)
1980 Amd 1 Main Dimensions of Shipborne
Barges Part 1: Specification for Main
Dimensions (AMD 4781) February 28, 1985
1985 Main Dimensions of Shipborne Barges
Part 2: Principal Technical Requirements for
Shipborne Barges
1987 Main Dimensions of Shipborne Barges
Part 3: The Arrangement, Dimensions and
Method of Test for Lifting Post Castings
1985 Multi-Bucket Dredgers Part 1: Scale of
Bucket Capacities
1985 Series 4 Shipborne Barges Part 1: Main
Dimensions
1987 Shipborne Barges Part 1: Main
Dimensions
1987 Shipborne Barges Part 1: Main
Dimensions
1987 Shipborne Barges Part 2: Main
Operational and Technical Requirements
1987 Shipborne Barges Part 3: Principal
Mating Dimensions for the Ventilating
Systems
2001 Wall-Hung Urinals - Connecting
Dimensions (R)
2000 Pedestal Bidets with Oven-Rim Supply
- Connection Dimensions Supersedes BS
5505-1: 1977; (R)
BS EN 36
BS EN 37
BS EN 39
BS EN 40-3-1
BS EN 40-3-2
BS EN 40-5
BS EN 40-6
BS EN 54-1
BS EN 54-2
BS EN 54-3
BS EN 54-4
BS EN 54-10
BS EN 54-11
1999 Wall-Hung Bidets with Over-Rim
Supply - Connecting Dimensions Supersedes
BS 5505-2: 1977; (R)
1999 Pedestal W.C. Pans with Independent
Water Supply - Connecting Dimensions
Together with BS EN 33: 1999 Supersedes
BS 5503-1: 1977; (R)
2001 Loose Steel Tubes for Tube and
Coupler Scaffolds - Technical Delivery
Conditions Supersedes BS 1139-1.1:1990;
(R)
2000 Lighting Columns - Part 3-1: Design
and Verification - Specification for
Characteristic Loads Supersedes BS 5649-6:
1982; (R)
2000 Lighting Columns - Part 3-2: Design
and Verification - Verification by Testing
Supersedes BS 5649-8: 1982; (R)
2000 Lighting Columns - Part 5:
Specification for Steel Lighting Columns
Together with BS EN 40-6:2000 it
Supersedes BS 5649-3:1982 and BS 56494:1982; (R)
2000 Lighting Columns - Part 6:
Specification for Aluminium Lighting
Columns Together with BS EN 40-5:2000 it
Supersedes BS 5649-3:1982 and BS 56494:1982; (R)
1996 Fire Detection and Fire Alarm Systems
Part 1: Introduction Supersedes BS 5445:
Part 1: 1977 (R)
1998 Fire Detection and Fire Alarm Systems
Part 2: Control and Indicating Equipment
Together with BS EN 54-4: 1998, It
Supersedes BS 5839: Part 4: 1988; (R)
2001 Fire Detection and Fire Alarm Systems
- Part 3: Fire Alarm Devices - Sounders (R)
1998 Fire Detection and Fire Alarm Systems
Part 4: Power Supply Equipment Together
with BS EN 54-2: 1998, It Supersedes BS
5839: Part 4: 1988; (R)
2002 Fire Detection and Fire Alarm Systems
- Part 10: Flame Detectors - Point Detectors
(R)
2001 Fire Detection and Fire Alarm Systems
- Part 11: Manual Call Points (R)
BS EN 71-4
BS EN 71-6
BS EN 81-1
BS EN 81-1
BS EN 81-2
BS EN 81-2
BS EN 81-3
BS EN 89
BS EN 89
CP 143 PART 5
CP 117 PART 2
CP 118
CP 143 PART 1
CP 143 PART 10
CP 143 PART 12
1998 Safety of Toys - Part 4: Experimental
Sets for Chemistry and Related Activities
Supersedes BS 5665-4: 1990; (L)
1995 Safety of Toys Part 6: Graphical
Symbol for Age Warning Labelling Also
Numbered as BS 5665: Part 5: 1993; (L)
1998 Safety Rules for the Construction and
Installation of Lifts - Part 1: Electric Lifts
Supersedes BS 5655-1: 1986; (R)
1998 Corr 1 Safety Rules for the
Construction and Installation of Lifts - Part 1:
Electric Lifts CORR 10809: March 2000;
Supersedes BS 5655-1: 1986; (R)
1998 Safety Rules for the Construction and
Installation of Lifts - Part 2: Hydraulic Lifts
Supersedes BS 5655-2: 1988; (R)
1998 Corr 1 Safety Rules for the
Construction and Installation of Lifts - Part 2:
Hydraulic Lifts CORR 10810: March 2000;
Supersedes BS 5655-2: 1988; (R)
2001 Safety Rules for the Construction and
Installation of Lifts - Part 3: Electric and
Hydraulic Service Lifts Supersedes BS 56553:1989; (R)
2000 Gas-Fired Storage Water Heaters for
the Production of Domestic Hot Water
Incorporating Amendment No. 1; Supersedes
BS 5258-7:1977 (R)
2000 Amd 1 Gas-Fired Storage Water
Heaters for the Production of Domestic Hot
Water AMD 12049; August 2001;
Supersedes BS 5258-7: 1977; (R)
1964 Sheet Roof and Wall Coverings Part 5:
Zinc
1967 Composite Construction in Structural
Steel and Concrete Part 2: Beams for Bridges
(OBSOLESCENT) 1969 Amd 1 Structural
Use of Aluminium (Replaced by BS 8118:
Part 1: 1991 and BS 8118: Part 2: 1991)
1958 Sheet Roof and Wall Coverings Part 1:
Aluminium, Corrugated and Troughed
1973 Sheet Roof and Wall Coverings Part 10:
Galvanized Corrugated Steel. Metric Units
(Replaces BS CP 143: Part 2: 1961)
1970 Amd 2 Sheet Roof and Wall Coverings
Part 12: Copper. Metric Units
CP 143 PART 15
CP 151 PART 1
CP 153 PART 2
CP 153 PART 3
CP 312 PART 1
CP 312 PART 2
CP 312 PART 3
CP 334 PART 3
CP 335 PART 1
CP 342 PART 2
BS ISO 14021
BS QC 001002-2
BS QC 001002-3
1973 Amd 1 Sheet Roof and Wall Coverings
Part 15: Aluminium. Metric Units (Replaces
BS CP 143: Part 7: 1965)
(OBSOLESCENT) 1957 Amd 1 Doors and
Windows Including Frames and Linings Part
1: Wooden Doors
(OBSOLESCENT) 1970 Windows and
Rooflights Part 2: Durability and
Maintenance
(OBSOLESCENT) 1972 Windows and
Rooflights Part 3: Sound Insulation
1973 Plastics Pipework (Thermoplastics
Materials) Part 1: General Principles and
Choice of Material
1973 Amd 1 Plastics Pipework
(Thermoplastics Materials) Part 2:
Unplasticized PVC Pipework for the
Conveyance of Liquids Under Pressure
1973 Plastics Pipework (Thermoplastics
Materials) Part 3: Polyethylene Pipes for
Conveyance of Liquids Under Pressure
(Replaced by BS 5955: Part 7: 1983)
(OBSOLESCENT) 1971 Selection and
Installation of Town Gas Cooking and
Refrigerating Appliances Part 3:
Refrigerators (Replaces BS CP 334: Part 3:
1947)
(OBSOLESCENT) 1973 Selection and
Installation of Miscellaneous Town Gas
Appliances Part 1: Domestic Laundering and
Miscellaneous Appliances (Replaces BS CP
335: Part 1: 1960)
1974 Centralized Hot Water Supply Part 2:
Buildings Other Than Individual Dwellings
(Replaces BS CP 342: 1950)
1999 Amd 1 Environmental Labels and
Declarations - Self-Declared Environmental
Claims (Type II Environmental Labelling)
AMD 13493: November 2, 2001;
Renumbered as BS EN ISO 14021: 2001; (G)
1997 Rules of Procedure of the IEC Quality
Assessment System for Electronic
Components (IECQ) Part 2: Documentation,
Including a New Clause on Regulations for
Technology Approval Schedules (T)
1997 Rules of Procedure of the IEC Quality
BS QC 010000
BS QC 010000
BS QC 160000 PART 1
BS QC 160000 PART 2
BS QC 221100
BS QC 221200
BS QC 300201
BS QC 300202
BS QC 300203
Assessment System for Electronic
Components (IECQ) Part 3. Approval
Procedures, Including a New Clause on
Technology Approval (T)
1993 Connectors for Frequencies Below 3
MHz for Use with Printed Boards Part 1:
Generic Specification - General
Requirements and Guide for the Preparation
of Detail Specifications, with Assessed
Quality (IEC 603-1: 1991) (T)
1993 Amd 1 Connectors for Frequencies
Below 3 MHz for Use with Printed Boards Part 1: Generic Specification - General
Requirements and Guide for the Preparation
of Detail Specifications, with Assessed
Quality AMD 10432; March 2000;
Renumbered as BS EN 6
1987 Electromechanical All-Or-Nothing
Relays. Electrical Relays: Generic
Specification Part 1: Test and Measurement
Procedures
1987 Electromechanical All-Or-Nothing
Relays. Electrical Relays: Generic
Specification Part 2: Quality Assessment
Procedures
1997 Radio-Frequency Connectors RF
Coaxial Connectors with Inner Diameter of
Outer Conductor 4,13 mm (0,163 in) with
Screw Coupling - Characteristic Impedance
50 ohms (Type SMA) IEC 169-15: 1979; (T)
1997 Radio-Frequency Connectors RF
Coaxial Connectors with Inner Diameter of
Outer Conductor 6,5 mm (0,256 in) with
Bayonet Lock - Characteristic Impedance 50
ohms (Type BNC) IEC 169-8: 1978; (T)
1985 Amd 1 Fixed Tantalum Capacitors with
Solid Electrolyte and Porous Anode.
Assessment Level E (Formerly BS 9930: Part
02.01: 1985)
1985 Amd 1 Fixed Tantalum Capacitors with
Non- Solid Electrolyte and Porous Anide.
Assessment Level E (Formerly BS 9930: Part
02.02: 1985)
1985 Fixed Tantalum Capacitors with NonSolid Electrolyte and Foil Electrode.
Assessment Level E (Formerly BS 9930: Part
BS QC 221200
BS QC 221300
BS QC 221400
BS QC 222000
BS QC 222100
BS QC 222400
BS QC 300000
BS QC 300200
02.03: 1985)
1997 Amd 1 Radio-Frequency Connectors RF Coaxial Connectors with Inner Diameter
of Outer Conductor 6,5 mm (0,256 in) with
Bayonet Lock - Characteristic Impedance 50
ohms (Type BNC) AMD 9920; April 1998;
IEC 169-8: 1978; (T)
1997 Radio-Frequency Connectors RF
Coaxial Connectors with Inner Diameter of
Outer Conductor 3 mm (0,12 in) with Snapon Coupling - Characteristic Impedance 50
ohms (Type SMB) IEC 169-10: 1983; (T)
1997 Radio-Frequency Connectors RF
Coaxial Connectors with Inner Diameter of
Outer Conductor 3 mm (0,12 in) with Screw
Coupling - Characteristic Impedance 50
Ohms (Type SMC) IEC 169-9: 1978; (T)
1996 Radio-Frequency Connectors RF
Coaxial Connectors with Inner Diameter of
Outer Conductor 6,5 mm (0,256 in) with
Screw Coupling - Characteristic Impedance
50 ohms (Type TNC) IEC 169-17:1980; (T)
1997 Radio-Frequency Connectors RF
Coaxial Connectors with Inner Diameter of
Outer Conductor 7 mm (0,276 in) with Screw
Coupling - Characteristic Impedance 50
Ohms (75 Ohms) (Type N) IEC 169-16:
1982; (T)
1997 Radio-Frequency Connectors RF
Coaxial Connectors with Inner Diameter of
Outer Conductor 5,6 mm (0,22 in) Characteristic Impedance 75 Ohms (Type
1,6/5,6) - Characteristic Impedance 50 Ohms
(Type 1,8/5,6) with Similar Mating
Dimensions IEC 169-13: 19
1983 Amd 1 Specification for Harmonized
System of Quality Assessment for Electronic
Components. Fixed Capacitors for Use in
Electronic Equipment. Generic Specification
(IEC 384-1: 1982) (AMD 5955) August 15,
1992 (Formerly BS 9930: Part 0: 1983)
1983 Amd 1 Fixed Capacitors for Use in
Electronic Equipment Sectional
Specification: Fixed Tantalum Capacitors
with Solid or Non-Solid Electrolyte (IEC
384-15: 1982) (Formerly BS 9930: Part 02.0:
BS QC 300400
BS QC 300401
BS QC 300600
BS QC 300701
BS QC 300701
BS QC 301201
BS QC 390000
BS QC 390101
BS QC 400000
BS QC 300900
BS QC 301200
1983) (AMD 5950) July 15, 1992
1983 Amd 1 Fixed Capacitors for Use in
Electronic Equipment Sectional Spec: Fixed
Metallized Polyethylene Terephthalate Film
Dielectric d.c. Capacitors (IEC 384-2: 1982)
(Formerly BS 9930: Part 04.0: 1983) (AMD
5951) July 15, 1992
1984 Amd 1 Fixed Metallized Polyethylene
Terephthalate Film Dielectric DC Capacitors
Assessment Level E (Formerly BS 9930: Part
04.01: 1984)
1991 Fixed Capacitors for Use in Electronic
Equipment. Sectional Specification for Fixed
Capacitors of Ceramic Dielectric, Class 1
(IEC 384-8: 1988)
1993 Fixed Capacitors for Use in Electronic
Equipment Blank Detail Specification Fixed
Capacitors of Ceramic Dielectric, Class 2
Assessment Level E (IEC 384-9-1: 1988)
1993 Corr 1 Harmonized System of Quality
Assessment for Elecronic Components Fixed Capacitors for Use in Electronic
Equipment - Blank Detail Specification Fixed Capacitors of Ceramic Dielectric, Class
2 - Assessment Level E CORR 10868:
February 2001;
1984 Amd 1 Fixed Metallized Polypropylene
Film Dielectric dc Capacitors Assessment
Level E (Formerly BS 9930: Part 12.01:
1984)
1992 Fixed Film Resistor Networks for Use
in Electronic Equipment Generic
Specification (IEC 1045-1: 1991)
1992 Film Resistor Networks of Assessed
Quality on the Basis of Capability Approval
Procedure Assessment Level E (IEC 1045-21: 1991)
1990 Fixed Resistors for Use in Electronic
Equipment: Generic Specification (Replaces
BS 9940: Part 0: 1983)
1991 Fixed Capacitors for Use in Electronic
Equipment. Sectional Specification: Fixed
Polystyrene Film Dielectric Metal Foil d.c.
Capacitors (IEC 384-7: 1991)
1983 Amd 1 Sectional Specification: Fixed
Metallized Polypropylene Film Dielectric
BS QC 301300
BS QC 301301
BS QC 390100
BS QC 400102
BS QC 400200
BS QC 400201
BS QC 400302
BS QC 400600
BS QC 400600
d.c. Capacitors (Previously BS 9930: Part
12.0 1983) (IEC 384-16: 1982) (AMD 5952)
July 15, 1992
1989 Fixed Capacitors for Use in Electronic
Equipment. Sectional Specification: Fixed
Metallized Polypropylene Film Dielectric a.c.
and Pulse Capacitors (Read in Conjunction
with BS QC 300000)
1990 Harmonized System of Quality
Assessment for Electronic Components.
Fixed Capacitors for Use in Electronic
Equipment. Blank Det Spec: Fixed
Metallized Polypropylene Film Diaelectric
a.c. and Pulse Capacitors Assessment Level
E (In Accordance with BS Q
1992 Fixed Film Resistor Networks for Use
in Electronic Equipment Sectional
Specification for Film Resistor Networks of
Assessed Quality on the Basis of the
Capability Approval Procedure (IEC 1045-2:
1991) (Read in Conjunction with BS QC
390000)
1992 Fixed Low-Power Non-Wirewound
Resistors Assessment Level F (IEC 115-2-2:
1992)
1993 Fixed Resistors for Use in Electronic
Equipment Sectional Specification: Fixed
Power Resistors (IEC 115-4: 1982)
(Formerly BS 9940: Part 02.01: 1984) (T)
1993 Fixed Resistors for Use in Electronic
Equipment. Blank Detail Specification: Fixed
Power Resistors. Assessment Level E (IEC
115-4-1: 1983) (Formerly BS 9940: Part
02.01: 1984) (T)
1992 Fixed Precision Resistors Assessment
Level F (IEC 115-5-2: 1992) (In Accordance
with BS 9940: Part 03.0)
1990 Fixed Resistors for Use in Electronic
Equipment: Sectional Specification: Fixed
Surface Mounting (Chip) Resistors
1990 Amd 1 Harmonized System of Quality
Assessment for Electronic Components Fixed Resistors for Use in Electronic
Equipment: Sectional Specification: Fixed
Surface Mounting (Chip) Resistors AMD
13109:June 2001; IEC 60115-8:1989; (T)
BS QC 410000
BS QC 410000
BS QC 410101
BS QC 410102
BS QC 410203
BS QC 410204
BS QC 410402
BS QC 420100
BS QC 410301
BS QC 410302
BS QC 420101
BS QC 420102
1990 Harmonized System of Quality
Assessment for Electronic Components
Potentiometers for Use in Electronic
Equipment Generic Specification (IEC 393-1:
1989)
1990 Amd 1 Harmonized System of Quality
Assessment for Electronic Components
Potentiometers for Use in Electronic
Equipment. Generic Specification (IEC 3931: 1989) (AMD 7286) January 15, 1993
1990 Load Screw Actuated and Rotary Preset
Potentiometers. Assessment Level E
1992 Potentiometers for Use in Electronic
Equipment Blank Detail Specification LeadScrew Actuated and Rotary Preset
Potentiometers Assessment Level F (IEC
393-2-2: 1992)
1992 Potentiometers for Use in Electronic
Equipment Blank Detail Specification
Single-Turn Rotary Power Potentiometers
Assessment Level E (IEC 393-4-1: 1992)
1992 Potentiometers for Use in Electronic
Equipment Blank Detail Specification
Single-Turn Rotary Power Potentiometers
Assessment Level F (IEC 393-4-2: 1992)
1992 Potentiometers for Use in Electronic
Equipment Blank Detail Specification Rotary
Precision Potentiometers Assessment Level E
(IEC 393-3-1: 1992)
1992 Varistors for Use in Electronic
Equipment: Sectional Specification for Surge
Suppression Varistors (IEC 1051-2: 1992)
1992 Potentiometers for Use in Electronic
Equipment Blank Detail Specification
Single-Turn Rotary Low-Power
Potentiometers Assessment Level E (IEC
393-5-1: 1992)
1992 Potentiometers for Use in Electronic
Equipment Blank Detail Specification
Single-Turn Rotary Low-Power
Potentiometers Assessment Level F (IEC
393-5-2: 1992)
1992 Silicon Carbide Surge Suppression
Varistors Assessment Level E (IEC 1051-21: 1991)
1992 Zinc Oxide Surge Suppression
BS QC 700000
BS QC 700000
BS QC 720102
BS QC 720104
BS QC 720105
BS QC 720106
BS QC 750000
BS QC 750000
Varistors Assessment Level E (IEC 1051-22: 1991)
1991 Semiconductor Devices. Generic
Specification for Discrete Devices and
Integrated Circuits (IEC 747-10: 1991)
(Replaces BS 9970: Part 0: 1985)
1991 Amd 1 Harmonized System of Quality
Assessment for Electronic Components
Semiconductor Devices. Generic
Specification for Discrete Devices and
Integrated Circuits AMD 9348; February 15,
1997; IEC 747-10: 1991; Supersedes BS
9970: Part 0: 1985; (T)
1997 Harmonized System of Quality
Assessment for Electronic Components
Semiconductor Devices - Optoelectonic
Devices - Blank Detail Specification for
Laser Diode Modules with Pigtail for Fibre
Optic Systems and Subsystems IEC 6074712-2: 1995; (T)
1997 Harmonized System of Quality
Assessment for Electronic Components
Semiconductor Devices - Optoelectronic
Devices - Blank Detail Specification for PinFET Modules with/without Pigtail, for Fibre
Optic Systems or Subsystems IEC 60747-124: 1997; (T)
1997 Harmonized System of Quality
Assessment for Electronic Components
Semiconductor Devices - Optoelectronic
Devices - Blank Detail Specification for PinPhotodiodes with/without Pigtail, for Fibre
Optic Systems or Subsystems IEC 60747-125:1997; (T)
1997 Harmonized System of Quality
Assessment for Electronic Components
Semiconductor Devices - Optoelectronic
Devices - Blank Detail Specification for
Avalanche Photodiodes (APDs) with/without
Pigtail, for Fibre Optic Systems or
Subsystems IEC 60747-12-6:
1986 Discrete Semiconductor Devices:
Sectional Specification
1986 Amd 1 Discrete Semiconductor
Services: Sectional Specification IEC 74711: 1985; AMD 7208; October 15, 1992
BS QC 750102
BS QC 750103
BS QC 750104
BS QC 750108
BS QC 750110
BS QC 760000
BS QC 790110
BS QC 880000 PART 1
BS QC 750109
BS QC 880000 PART 1
BS QC 960000
BS QC 960101
BS QC 960501
1990 Harmonized System of Quality
Assessment for Electronic Components.
Semiconductor Discrete Devices (In
Accordance with BS QC 750100)
1990 Harmonized System of Quality
Assessment for Electronic Components.
Semiconductor Discrete Devices (In
Accordance with BS QC 750100)
1991 Bipolar Transistors for Switching
Applications (IEC 747-7-3: 1991) (T)
1990 Harmonized System of Quality
Assessment for Electronic Components.
Semiconductor Discrete Devices (In
Accordance with BS QC 750100)
1990 Reverse Blocking Triode Thyristors,
Ambient and Case-Rated, up to 100A (In
Accordance with BS QC 750100)
1990 Amd 1 Film and Hybrid Film Integrated
Circuits. General Specification (IEC 748-20:
1988) (AMD 6754) September 1991
1992 Blank Detail Specification
Microprocessor Integrated Circuits (IEC 7482-6: 1991) (T)
1995 Harmonized System of Quality
Assessment for Electronic Components Fibre
Optic Fan-Outs Part 1: Generic Specification
(IEC 1314-1: 1995) (T)
1993 Blank Detail Specification: Rectifier
Diodes (Including Avalanche Rectfier
Diodes), Ambient and Case-Rated, for
Currents Greater Than 100 A (IEC 747-2-2:
1993) (In Accordance with BS QC 750100)
(T)
1995 Amd 1 Harmonized System of Quality
Assessment for Electronic Components Fibre
Optic Fan-Outs Part 1: Generic Specification
AMD 9689; December 15, 1997;
Renumbered as BS EN 61314-1: 1997: (T)
1992 Electromechanical Switches for Use in
Electronic Equipment Generic Specification
(IEC 1020-1: 1991)
1992 Electromechanical Switches for Use in
Electronic Equipment Blank Detail
Specification for Rotary Switches (IEC 10202-1: 1991)
1992 Electromechanical Switches for Use in
BS QC 200012
BS QC 760000
BS QC 760200
BS QC 763000
CP 2012 PART 1
DD 241 PART 10
DD 241 PART 9
2A 110
2A122-2A124
2A 173
2A 174
2A 175
2A 204
Electronic Equipment Blank Detail
Specification for in-Line Package Switches
(IEC 1020-3-1: 1991)
1996 Process Assessment Schedule for
Printed Board Design Facilities (T)
1990 Amd 1 Film and Hybrid Film Integrated
Circuits. Generic Specification IEC 748-20:
1988; AMD 9331 January 15, 1997; (T)
1997 Harmonized System of Quality
Assessment for Electronic Components
Semiconductor Devices - Integrated Circuits
- Sectional Specification for Film Integrated
Circuits and Hybrid Film Integrated Circuits
on the Basis of the Capability Approval
Procedure
1990 Film and Hybrid Film Integrated
Circuits. Generic Specification (Document
Number Changed to BS QC 760000: 1990 by
Amendment 1)
1974 Amd 2 Foundations for Machinery Part
1: Foundations for Reciprocating Machines
(AMD 1938) April 30, 1976
1997 ControlNet Part 10: Object Library (S)
1997 ControlNet Part 9: Station Management
(S)
1962 Amd 4 Steel Nuts (Unified Hexagons
and Unified Threads) for Shear Bolts for
Aircraft (Replaces BS A 109 and A 110:
1954)
1981 Clinch Nuts (Unified Threads) for
Aircraft
1962 Amd 6 100 Degrees Countersunk Head
Steel Bolts (Unified Treads) for Aircraft
AMD 5385 July 29, 1988; Replaces BS A
173: 1956; (S)
1962 Amd 2 100 Degree Countersunk Head
Corrosion-Resisting Steel Bolts (Unified
Threads) for Aircraft (Replaces BS A 174:
1956)
1962 Amd 2 100 Degree Countersunk Head
Aluminium Alloy Bolts (Unified Threads) for
Aircraft (Replaces BS A 175: 1956)
1963 Amd 2 2A 206, 2A 208, A 217- 225
Machine Screws and Nuts (Unified Threads)
Below 1/4 in for Aeronautical Purposes
(Replaces BS A 204-209: 1957)
2A 210
2A 229
2A 231
2A 25
2A 29
2A 294
2A 230
2A 24
2A 26
2A 27
2A 295
1962 Brass Nuts (Unified Hexagons and
Unified Threads) for Aircraft (Replaces BS A
210: 1960)
1972 Amd 3 Hexagonal Head Steel Bolts 160
000 Lbf/Square Inches (1100 MPa) (AMD
6142) December 21, 1990 (Replaces BS A
229: 1968)
1993 Rolled Threads for Bolts - Lead and
Runout Requirements (ISO 3353: 1992)
(Supersedes A 231: 1982) (S)
(OBSOLESCENT) 1962 Amd 5 Steel
Hexagonal-Headed Bolts (B.A. and B.S.F.
Threads) for Aircraft (AMD 6082) November
30, 1990 (Replaces BS 2A 15: 1940 and BS
A 25: 1950)
(OBSOLESCENT) 1962 Amd 1 Aluminium
Alloy Hexagonal Nuts (B.A. and B.S.F.
Threads) (Ordinary and Slotted) for Aircraft
(Replaces BS A 29: 1950)
1998 Spline Drives - Wrenching
Configuration - Metric Series Supersedes BS
A 294: 1984; ISO 7403: 1998; (S)
1974 Amd 2 100 Degree Countersunk Head
Steel Bolts (160 000 Lbf/Square Inches
(1100 MPa) with Hi-Torque Speed Drive
Recesses) (AMD 6151) May 31, 1990
(Replaces BS A 230: 1968)
(OBSOLESCENT) 1962 Amd 2 CorrosionResisting Steel Hexagon Nuts (B.A. and
B.S.F. Threads) (Ordinary, Thin, Slotted and
Castle) for Aircraft (AMD 6066) May 31,
1990 (Replaces BS A 16: 1939 and BS A 24:
1949)
(OBSOLESCENT) 1962 Amd 2 CorrosionResisting Steel Hexagonal-Headed Bolts
(B.A. and B.S.F. Threads) for Aircraft (AMD
6065) May 31, 1990 (Replaces BS 2A 15:
1940 and BS A 26: 1949)
(OBSOLESCENT) 1962 Amd 4 Steel
Hexagonal Nuts (B.A. and B.S.F. Threads)
(Ordinary, Thin, Slotted and Castle) for
Aircraft AMD 6083 November 30, 1990;
Replaces BS A 16: 1939 and BS A 27: 1950;
(S)
2000 Nuts, Self-Locking, with Maximum
Operating Temperature Less Than or Equal
2A 296
2A 30
2A 302
2A 57
2A 58
2A 59
2A 59
2A 60
2A 60
2A 61
2B 21
to 425 Degrees C - Test Methods ISO 7481:
2000; (S)
1995 Bolts and Screws, Metric - Tolerances
of Form and Position (ISO 7913: 1994) (S)
(OBSOLESCENT) 1962 Amd 5 Steel
Hexagonal-Headed Bolts (B.A. and B.S.F.
Threads) with Close Tolerance Shanks for
Aircraft AMD 6084 November 30, 1990;
Replaces BS A 30: 1950; (S)
2000 Nuts, Self-Locking, with Maximum
Operating Temperatures Less Than or Equal
to 425 Degrees Celcius - Procurement
Specification ISO 5858: 1999; (S)
(OBSOLESCENT) 1962 Amd 4 Steel
Hexagonal-Headed Shear Bolts (B.S.F.
Threads) for Aircraft (Replaces BS A 57 and
A 58: 1952)
(OBSOLESCENT) 1962 Amd 4 Steel
Hexagonal Nuts (B.S.F. Threads) for Shear
Bolts for Aircraft (Replaces BS A 57 and
A58: 1952)
(OBSOLESCENT) 1962 Amd 4 CadmiumPlated Steel Hexagonal-Headed Bolts (B.A.
and B.S.F. Threads) with Close Tolerance
Shanks for Aircraft (Replaces BS A 59:
1954)
(OBSOLESCENT) 1962 Amd 5 CadmiumPlated Steel Hexagonal-Headed Bolts (B.A.
and B.S.F. Threads) with Close Tolerance
Shanks for Aircraft AMD 7659; April 15,
1993; Replaces BS A 59: 1954; (S)
(OBSOLESCENT) 1962 Amd 4 CadmiumPlated Steel Hexagonal-Headed Shear Shear
Bolts (B.S.F. Threads) for Aircraft (AMD
2584) April 28, 1978 (Replaces BS A 60:
1954)
1962 Amd 5 Cadmium-Plated Steel
Hexagonal-Headed Shear Bolts (B.S.F.
Threads) for Aircraft AMD 7660 April 15,
1993; Replaces BS A 60: 1954; (S)
(OBSOLESCENT) 1962 Amd 1 Aluminium
Alloy Hexagonal-Headed Bolts (B.A. and
B.S.F. Threads) for Aircraft (Replaces BS A
28: 1950 and BS A 61: 1955)
1933 White Metal (88/8/4) Ingots (Suitable
for Bearings) (Replaces BS B 21: 1930)
2C 11
2C 12
2C 13
2C 19
2C 4
2C 5
2C 8
2E 21
2F 126
2F 128
2F 129
2F 129
2F 135
2F 142
2F 52
2F 66
1988 Ground Pressure Test Connections for
Aircraft Pressure Cabins (Replaces BS C 11:
1958)
1980 Jacking Pads for Aircraft (Replaces BS
C 12: 1958)
1988 Sizes of Aircraft Gravity Filling
Orifices and Associated Replenishment
Nozzles (Metric Series) (Replaces BS C 13:
1960)
1994 Pressure Re-Oiling Connection (New
Type) (Superseding BS C19: 1986) (ISO
9939 : 1994) (S)
1973 Amd 2 Coupling Dimensions for AeroEngine Refrigerant Pressure Replenishment
Connections (Replaces BS C 4: 1966)
1976 Mating Dimensions of Liquid Oxygen
Replenishment Couplings (Replaces BS C 5:
1965)
1988 Rail and Stud Configuration for
Aircraft Passenger Equipment and Cargo
Restraint (Replaces BS C8: 1969)
(OBSOLESCENT)1957 Amd 4 Pren Type
Electric Cables for Aircraft
1990 34 G/Square Metres Nylon Parachute
Fabric (Replaces BS F 126: 1980)
1992 Cotton Webbing Suitable for Aerospace
Purposes (Warp Yarn Nominally R 310 Tex)
(Replaces BS F 128: 1985)
1991 Woven Polyester Narrow Fabrics for
Aerospace Purposes (Replaces BS F 129:
1986)
1991 Amd 1 Woven Polyester Narrow
Fabrics for Aerospace Purposes (AMD 8476)
June 15, 1995 (Replaces BS F 129: 1986) (S)
1992 Braided Nylon Cord with Unspecified
Dimensional Stability for Aerospace
Purposes (Replaces BS F 135: 1987)
1999 Hydrolysis Resistant, Thermoplastic
Polyether Polyurethane Elastomer Coated
Nylon Fabric for Aerospace Purposes
Supersedes F 142: 1995; (S)
(OBSOLESCENT) 1959 Amd 2 Flax
Reinforcement Webbing for Aeronautical
Purposes (Replaces BS F 52: 1930)
1982 Rubber Bonded Cork Sheets (Replaces
BS F 66: 1966)
2F 67
2G 111
2G 112
2G 113
2G 114
2G 115
2G 117
2G 124 PART 1
2G 124 PART 2
2G 127
2G 132
2G 134
2G 135
2G 143
2G 146
2G 147 PART 1
2G 147 PART 2
2G 180
2G 182
1980 Hose for Aviation Fuel and Engine
Lubricating Oil for Aeronautical Purposes
(Replaces BS F 67: 1966)
1955 Rate of Climb Indicators for Aircraft
(Replaces BS G 111: 1949)
1956 Air-Driven Directional Gyroscopes for
Aircraft (Replaces BS G 112: 1949)
1956 Manifold Pressure Gauges for Aircraft
(Replaces BS G 113: 1949)
1953 Direct Current Ratiometer Indicators
for Aircraft (Replaces BS G 114: 1949)
1956 Amd 1 Sensitive Altimeters for Aircraft
(Replaces BS G 115: 1949)
1975 Pressure-Driven Airspeed Indicators
(Replaces BS G 117: 1949)
1966 Amd 1 A.C. Generators for Aircraft
Part 1: Constant Frequency (Replaces BS G
124: 1950)
1966 A.C. Generators for Aircraft Part 2:
Variable Frequency
1967 Power and Current Transformers for
Use in Aircraft Electrical Power Supply
Systems
1981 Electromagnetically Operated
Contactors for Aircraft (Replaces BS G 132:
1951)
1970 D.C. Generators (Replaces BS G 134:
1951)
1967 Amd 1 Electrically-Heated Pitot and
Pitot-Static Pressure Heads (Replaces BS G
135: 1955)
1965 Amd 1 A.C. and D.C. Rotary and
Linear Actuators for Aircraft (Replaces BS G
143: 1953)
1966 D.C. Motors for Aircraft (Replaces BS
G 146: 1955)
1966 Amd 1 A.C. Motors for Aircraft Part 1:
Three-Phase Constant Frequency SquirrelCage Induction Motors (Replaces BS G 147:
1955)
1966 A.C. Motors for Aircraft Part 2: ThreePhase Variable Frequency Squirrel-Cage
Induction Motors
1974 Permanent Splicing of Aircraft
Electrical Cables (Replaces BS G 180: 1962)
1975 Pressure-Driven Machmeters for
2G 191
2G 196
2G 199
2G 201
2G 202
2G 210
2G 215 PART 1
2G 215 PART 2
2G 219
2G 221
2G 223
2G 232
2G 238
Aircraft (Replaces BS G 182: 1963)
1988 Lighting for Aircraft Indicators Using
Integral Filament Lamps (Replaces BS G
191: 1965)
1971 Static Invertors (Replaces BS G 196:
1966)
1984 Amd 1 Tables Relating to Altitudes,
Airspeed and Mach Numbers for Use in
Aeronautical Instrument Design and
Calibration (Replaces BS G 199: 1967)
1996 Counter and Pointer Pressure
Altimeters (S)
1988 Design and Performance Requirements
for Airframe-Fit Electrical Connectors for
D.C. and Low Frequency A.C. Applications
Replaces BS G 202: 1968 and BS 9540: 1983
1991 Amd 1 PTFE Insulated Equipment
Wires and Cables, Single- and Multi-Core,
with Silver Plated Copper Conductors (190
Degrees C) or Nickel Plated Copper
Conductors (260 Degrees C) (AMD 7223)
July 15, 1992 (Replaces BS G 210: 1970)
1985 Extension Cables for Aircraft NickelChromium and Nickel- Aluminium
Thermocouple Pt 1: Conductors (Replace BS
G 215: 1972)
1989 Extension Cables for Aircraft NickelChromium and Nickel- Aluminium
Thermocouple Part 2: Terminations
(Replaces BS G 220: 1976)
1983 General Requirements for Ground
Support Electrical Supplies for Aircraft
(Replaces BS G 219: 1975)
(OBSOLESCENT) 1980 Minyvin Type
Electric Cables (Metric Units) (Replaces BS
G 221: 1976)
1989 Screen Terminating Devices for
Aircraft Electric Cables (Replaces BS G 223:
1977)
1987 Electrical Cables for General Airframe
or Equipment Interconnect Use (135 Degrees
C), Wrapped Insulation
1996 Electric Cables for General Airframe or
Equipment Interconnect Use (260 Degrees
Celsius), Nickel Plated Copper and Copper
Alloy Conductors, with Wrapped Insulation
2G 239
2HC 101
2HC 102
2HC 203
2HC 204
2HC 207
2HC 208
2HC 209
2HC 210
2HC 211
2HR 1
(Replaces BS G 238: 1987) (S)
1992 Primary Active Lithium Batteries for
Use in Aircraft (Replaces BS G 239: 1987)
1989 Amd 2 Precipitation Hardening
Chromium-Nickel-Copper- Molybdenum
Steel Castings (950 MPa) (Cr 14.0, Ni 4.5,
Cu 2.5, Mo 1.5) (AMD 6704) April 30, 1991
(Replaces BS HC 101: 1973)
1989 Amd 2 Precipitation Hardening
Chromium-Nickel-Copper- Molybdenum
Steel Castings (1250 MPa) (Cr 14.0, Ni 4.5,
Cu 2.5, Mo 1.5) (AMD 6705) July 31, 1991
(Replaces BS HC 102: 1973)
1989 Nickel-Chromium- AluminiumMolybdenum- Niobium Alloy Castings
(Nickel Base Cr 13.0, Al 6.0, Mo 4.5, Nb
2.3) (Replaces BS HC 203: 1973)
1989 Nickel-Cobalt-Chromium- AluminiumTitanium- Molybdenum Alloy Castings
(Nickel Base Co 15.0, Cr 10.0, Al 5.5, Ti 4.8,
Mo 3.0) (Replaces BS HC 204: 1973)
1989 Nickel-Cobalt-Tungsten- ChromiumAluminium- Tantalum-Hafnium- Titanium
Alloy Castings, (Nickel Base Co 10.0, W
10.0, Cr 9.0, Al 5.5, Ta 2.5, Hf 1.5, Ti 1.5)
(Replaces BS HC 207: 1979)
1989 Nickel-Cobalt-Tungsten- ChromiumAluminium- Molybdenum TitaniumTantalum Alloy Castings (Nickel Base Co
10.0, W 10.0, Cr 9.0, Al 5.5, Mo 2.5, Ti 1.5,
Ta 1.5) (Replaces BS HC 208: 1979)
1989 Low Carbon, Precipitation Hardening
Nickel-Chromium- AlumimiumMolybdenum- Niobium Alloy Castings
(Nickel Base Cr 11.5, Al 6.0, Mo 4.0, Nb
2.0) (Replaces BS HC 209: 1979)
1989 Nickel-Tungsten- AluminiumChromium- Molybdenum Alloy Castings
(Replaces BS HC 210: 1979)
1989 Nickel-Chromium-CobaltMolybdenum-Aluminium- Titanium Alloy
Castings (Nickel Base Cr 15.5, Co 10.0, Mo
8.3, Al 4.2, Ti 3.6) (Replaces BS HC 211:
1979)
1973 Amd 2 Nickel-Chromium- TitaniumAluminium Heat-Resisting Alloy Billets,
2HR 504
2L 116
2L 126
2HR 2
2HR 201
2HR 202
2HR 401
2HR 501
2HR 502
2HR 503
Bars, Forgings and Parts (Nickel Base, Cr
19.5, Ti 2.2, Al 1.4) (Replaces BS HR 1:
1970)
1973 Amd 2 Nickel-Chromium-Titanium
Heat-Resisting Alloy Bar, and Wire for
Rivets, and Rivets (Nickel Base, Cr 19.5, Ti
0.4) (Replaces BS HR 504: 1970)
(OBSOLESCENT) 1985 Tube of 99%
Aluminium (Cold Drawn: Seamless: Not
Tested Hydraulically) (Not Exceeding 12 mm
Wall Thickness) (Replaces BS L 116: 1973)
1970 Ingots and Castings of MagnesiumCerium-Zinc- Zirconium Alloy (Precipitation
Treated) (Replaces BS L 126: 1960)
1973 Amd 1 Nickel-Chromium-CobaltTitanium-Aluminium Heat-Resisting Alloy
Billets, Bars, Forgings and Parts (Nickel
Base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
(Replaces BS HR 2:1971)
1974 Amd 1 Nickel-Chromium- TitaniumAluminium Heat-Resisting Alloy Plate,
Sheet, and Strip (Nickel Base, Cr 19.5, Ti
2.2, Al 1.4) (AMD 5996) August 31, 1988
(Replaces BS HR 201: 1970)
1973 Amd 1 Nickel-Chromium-CobaltTitanium-Aluminium Heat- Resisting Alloy
Sheet and Strip (Nickel Base, Cr 19.5, Co
18.0, Ti 2.5, Al 1.5) (AMD 6143) June 29,
1990 (Replaces BS HR 202: 1971)
1973 Amd 1 Nickel-Chromium- TitaniumAluminium Heat-Resisting Alloy Cold
Worked and Softened Seamless Tubes
(Nickel Base Cr 19.5, Ti 2.2, Al 1.4)
(Replaces BS HR 401: 1970)
1973 Amd 2 Nickel-Chromium-CobaltTitanium-Aluminium Heat-Resisting Alloy
Cold Drawn Wire for Springs and Springs
(Nickel Base Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
(Replaces BS HR 501: 1970)
1973 Amd 2 Nickel-Chromium-CobaltTitanium-Aluminium Heat-Resisting Alloy
Cold Drawn and Solution Heat Treated Wire
for Springs and Springs (Nickel Base Cr
19.5, Co 18.0, Ti 2.5, Al 1.5) (Replaces BS
HR 502: 1970)
1973 Amd 1 Nickel-Chromium-Cobalt-
2L 127
2L 128
2L 500
2L 503
2L 504
2L 505
2L 508
2L 509
2L 77
2L 83
2L 85
Titanium-Aluminium Heat- Resisting Alloy
Wire for Thread Inserts (Nickel Base, Cr
19.5, Co 18.0, Ti 2.5, Al 1.5) (Replaces BS
HR 503: 1970)
(OBSOLESCENT) 1970 Ingots and Castings
of Magnesium-Zinc-Zirconium Alloy
(Precipitation Treated) (Replaces BS L 127:
1960)
1970 Ingots and Castings of MagnesiumZinc-Cerium- Zirconium Alloy (Precipitation
Treated) (Replaces BS L 128: 1960)
1973 Procedure for Inspection and Testing of
Wrought Magnesium-Base Alloys (Replaces
BS L 500: 1967)
(OBSOLESCENT) 1973 Tube of
Magnesium-6 Per Cent Aluminium-Zinc
Alloy
(OBSOLESCENT) 1973 Sheet and Strip of
Magnesium-3 Per Cent Zinc-Zirconium
Alloy
(OBSOLESCENT) 1973 Bars and Extruded
Sections of Magnesium- 3 Per Cent ZincZirconium Alloy (Not Exceeding 100 mm
Diameter or Minor Sectional Dimension)
(OBSOLESCENT) 1973 Bars and Extruded
Sections of Magnesium-1 1/4% ZincZirconium Alloy
(OBSOLESCENT) 1973 Tube of Magnesium
- 1 1/4% Zinc - Zirconium Alloy (Suitable
for Welding by Inert-Gas Shielded Arc
Techniques) (Zn 1.25, Zr0.6)(S)
1971 Forging Stock and Forgings of
Aluminium- Copper-Magnesium- SiliconManganese Alloy (Solution Treated and
Precipitation Treated) (Cu 4.4, Mg 0.5, Si
0.7, Mn 0.8)
(OBSOLESCENT) 1971 Forging Stock,
Bars, Extruded Sections and Forgings of
Aluminium- Copper-Nickel-MagnesiumIron-Silicon Alloy (Solution Treated and
Precipitation Treated) (Cu 2, Ni 1, Mg 1, Si
0.9, Fe 0.9)
(OBSOLESCENT) 1971 Amd 1 Forging
Stock, Bars, Extruded Sections and Forgings
of Aluminium- Copper-Magnesium Alloy
(Solution Treated and Precipitation Treated)
2L 98
2M 41
2M 46
2M 47
2L 87
2L 88
2L 93
2L 93
2L 95
2L 95
(Cu 1.5, Si 1.0, Mg 0.8)
(OBSOLESCENT) 1971 Plate of
Aluminium-Copper-Magnesium- Manganese
Alloy (Solution Treated and Aged at Room
Temperature: Not Controlled Stretched) (Cu
4.4, Mg 1.5, Mn 0.6)
1977 Methods of Numbering Propulsion
Units and Components and Describing Their
Direction of Rotation (Replaces BS M 41:
1972)
1986 Outside Diameters and Thicknesses of
Tubing (Replaces BS M 46: 1974)
1990 Retreading of Cross Ply Tyres for
Aircraft (Replaces BS M 47: 1975)
1971 Hexagonal Bars for Nuts, Couplings
and Hollow Machined Parts of Al-Cu-Mg-SiMn Alloy (Solution and Precipitation
Treated) (Free from Peripheral and
Asymmetric Coarse Grain) (MW 14 mm,
MW 36mm Across Flats) (Cu 4.4, Mg 0.5, Si
0.7, Mn 0.8) (Replaces B
(OBSOLESCENT) 1971 Aluminium-Alloy
Coated Sheet and Strip of Aluminium-ZincMagnesium-Copper- Chromium Alloy
(Solution Treated and Precipitation Treated)
(Zn 5.8, Mg 2.5, Cu 1.6, Cr 0.15)
1971 Plate of Aluminium- CopperMagnesium- Silicon-Manganese Alloy
(Solution Treated, Controlled Stretched and
Precipitation Treated) (Cu 4.4, Mg 0.5, Si
0.7, Mn 0.8) (Replaces BS L 93: 1968)
1971 Amd 1 Plate of Aluminium- CopperMagnesium-Silicon -Manganese Alloy
(Solution Treated, Controlled Stretched and
Precipitation Treated) (Cu 4.4, Mg 0.5, Si
0.7, Mn 0.85) (AMD 6841) November 29,
1991 (Replaces BS L 93: 1968)
(OBSOLESCENT) 1971 Plate of
Aluminium-Zinc- Magnesium-CopperChromium Alloy (Solution Treated,
Controlled Stretched and Precipitation
Treated) (Zn 5.8, Mg 2.5, Cu 1.6, Cr 0.15)
1971 Amd 1 Plate of Aluminium-ZincMagnesium-Copper- Chromium Alloy
(Solution Treated, Controlled Stretched and
Precipitation Treated) (Zn 5.8, Mg 2.5, Cu
2L 97
2L 97
2L 99
2M 49
2M 50
2M 51
2M 52
2M 53
2M 54
2M 59
2M 63
2M 72
1.6, Cr 0.15) (AMD 6842) November 29,
1991
1971 Plate of Aluminium- CopperMagnesium- Manganese Alloy (Solution
Treated, Controlled Stretched and Aged at
Room Temperature) (Cu 4.4, Mg 1.5, Mn
0.6) (Replaces BS L 97: 1968)
1971 Amd 1 Plate of Aluminium- CopperMagnesium- Manganese Alloy (Solution
Treated, Controlled Stretched and Aged at
Room Temperature) (Cu 4.4, Mg 1.5, Mn
0.6) (AMD 6843) November 29, 1991
(Replaces BS L 97: 1968)
1972 Amd 2 Ingots and Castings of
Aluminium-Silicon- Magnesium Alloy
(Solution Treated and Precipitation Treated)
(Si 7, Mg 0.3) (AMD 6543) March 28, 1991
(Replaces BS L 99:1969)
1997 Aircraft - Hydraulic Components Marking to Indicate Fluid for Which
Component is Approved Supersedes BS M
49: 1977; ISO 3323: 1997; (S)
1986 Clearance Dimensions for Tripod Jacks
for Aircraft (Replaces BS M 50: 1980)
1989 Classification for Pressure and
Temperature for Fluid Systems and
Components (Replaces BS M 51: 1982)
1989 Impulse Testing of Hydraulic Hose,
Tubing and Fitting Assemblies for Aerospace
Fluid Systems (Replaces BS M 52: 1983)
1997 Aircraft - Fluid Systems - Thermal
Shock Testing of Piping and Fittings
Supersedes BS M 53: 1983; (S)
1991 Temperature Control in the Heat
Treatment of Metals (Replaces BS M 54:
1982)
1993 Interface of Metric Couplings, 24
Degree Cone, for Aerospace Fluid Systems
(ISO 7319: 1992) (Supersedes M 59: 1986)
(S)
1993 Dimensions of Aerospace Fluid System
Port Connection, Seal and Fitting End (ISO
7320: 1992) (Supersedes M 63: 1987) (S)
1996 Air Cargo Equipment - Minimum
Airworthiness Requirements and Test
Conditions for Certified Air Cargo Unit Load
2N 1
2N 2
2PL 1
2S 131
2S 129
2S 130
2S 135
2S 136
2S 137
2S 140
2S 142
2S 143
Devices (ISO 8097: 1995) (Replaces BS M
72: 1994) (S)
(OBSOLETE) 1990 Amd 1 Oro-Nasal
Oxygen Mask Assemblies for Use in
Demand Systems AMD 6352; July 31, 1991
1989 General Requirements for Construction
and Performance of Airborne Chemical
Oxygen Generators (Replaces BS N 2: 1972)
1966 Phenolic Mouldings for Aeronautical
Purposes (Replaces BS PL 1: 1951)
1977 Amd 1 High Thermal Expansion Steel
Billets, Bars, Forgings and Parts (620 MPa:
Limiting Ruling Section 150 mm) (Replaces
BS S 131: 1965)
(OBSOLESCENT) 1976 Amd 1 18/9
Chromium-Nickel Corrosion-Resisting Steel
(Titanium Stabilized) Billets, Bars, Forgings
and Parts (540 MPa: Limiting Ruling Section
150 mm) (Replaces BS S 129: 1964)
1976 Amd 1 18/9 Chromium-Nickel
Corrosion-Resisting Steel (Niobium
Stabilized) Billets, Bars, Forgings and Parts
(540 MPa; Limiting Ruling Section 150 mm)
(Replaces BS S 130: 1964)
1977 1 Per Cent Carbon- Chromium Steel
Billets, Bars, Forgings and Parts (Limiting
Ruling Section 25 mm) (Replaces BS S 135:
1965)
1977 1 Per Cent Carbon- Chromium Steel
(Vacuum Arc Remelted) Billets, Bars,
Forgings and Parts (Limiting Ruling Section
25 mm) (Replaces BS S 136: 1967)
1976 High Chromium-Nickel CorrosionResisting Steel Bright Bars (Free Machining)
(880-1080 MPa; Limiting Ruling Section 70
mm) (Replaces BS S 137: 1967)
1976 Amd 2 2 1/2 Per Cent NickelChromium-Molybdenum Steel Billets, Bars,
Forgings and Parts (1080-1280 MPa:
Limiting Ruling Section 150 mm) (Replaces
BS S 140: 1968)
1977 Amd 1 1 Per Cent ChromiumMolybdenum Steel Billets, Bars, Forgings
and Parts (900-1100 MPa: Limiting Ruling
Section 40 mm) (Replaces BS S 142: 1968)
1976 Amd 1 Chromium-Nickel-Copper-
2S 143
2S 143
2S 146
2S 147
2S 147
2S 149
2S 149
2S 510
2S 511
2S 513
Molybdenum Corrosion- Resisting Steel
(Precipitation Hardening) Billets, Bars,
Forgings and Parts (930-1080 MPa)
1976 Amd 2 Chromium-Nickel-CopperMolybdenum Corrosion- Resisting Steel
(Precipitation Hardening) Billets, Bars,
Forgings and Parts (930-1080 MPa) (AMD
6775) December 24, 1991
1976 Amd 3 Chromium-Nickel-CopperMolybdenum Corrosion- Resisting Steel
(Precipitation Hardening) Billets, Bars,
Forgings and Parts (930-1080 MPa) (AMD
8567) May 15, 1995 (S)
1976 Amd 1 4 Per Cent Nickel- ChromiumMolybdenum Air-Hardening Steel (Vacuum
Arc Remelted) Billets, Bars, Forgings and
Parts (1760-1960 MPa: Limiting Ruling
Section 100 mm) AMD 3524; August 31,
1981; Replaces BS S 146: 1969; (S)
1976 0.5 Per Cent Nickel- ChromiumMolybdenum Steel Bars for the Manufacture
of Forged Bolts and Forged Nuts (Replaces
BS S 147: 1969)
1976 Amd 1 0.5 Per Cent NickelChromium-Molybdenum Steel Bars for the
Manufacture of Forged Bolts and Forged
Nuts (AMD 6836) November 29, 1991
(Replaces BS S 147: 1969)
1976 1.75 Per Cent Nickel- ChromiumMolybdenum Steel Bars for the Manufacture
of Forged Bolts and Forged Nuts (Replaces
BS S 149: 1972)
1976 Amd 1 1.75 Per Cent NickelChromium-Molybdenum Steel Bars for the
Manufacture of Forged Bolts and Forged
Nuts (AMD 6837) November 29, 1991
(Replaces BS S 149: 1972)
(OBSOLESCENT) 1970 Carbon Steel Sheet
and Strip (430/540 MN/ Square Metres)
(Suitable for Welding) (Replaces BS S 510:
1956)
(OBSOLESCENT) 1970 Deep Drawing
Carbon Steel Sheet and Strip
(280/400MN/Square Metres) (Suitable for
Welding) (Replaces BS S 511: 1956)
1970 Spring Steel Strip (Replaces BS S 513:
2S 515
2S 92
2S 93
2S 97
2S 514
2S 98
2SP 1
2SP 105
2SP 106
2SP 142-143
2SP 148-150
2SP 151-153
2SP 154-156
2SP 157-163
1956)
(OBSOLESCENT) 1969 Carbon-Manganese
Steel Sheet and Strip (Softened) (For Use in
Softened Condition: 46/59 Hbar) (Suitable
for Welding) (Replaces BS S 515: 1956)
(OBSOLESCENT) 1964 Carbon-Manganese
Steel (Suitable for Welding) (Replaces BS S
92: 1949)
(OBSOLESCENT) 1964 '40' Carbon Steel
(Normalized) (Replaces BS S 93: 1949)
(OBSOLESCENT) 1964 Amd 2 2 1/2 Per
Cent Nickel- Chromium-Molybdenum Steel
(65/75 Tonf/Sq in: Limiting Ruling Section 6
in) (S) (Replaces BS S 97: 1949)
(OBSOLESCENT) 1969 Carbon-Manganese
Steel Sheet and Strip (for Use in the
Hardened and Tempered Condition: 77/ 100
Hbar) (Suitable for Welding) (Replaces BS S
514: 1956)
(OBSOLESCENT) 1964 Amd 2 2 1/2 Per
Cent Nickel- Chromium Molybdenum Steel
(75/85 Tonf/Sq in: Limiting Ruling Section 6
in) (AMD 5680) July 29, 1988 (Replaces BS
S 98: 1949)
1927 Amd 4 Shackles (Replaces BS SP 1:
1916)
1955 Amd 3 Swaged Cable-End Assemblies
(UNF Threads) for Preformed Steel Wire
Rope (W.9) for Aircraft (Replaces BS SP
105: 1953)
1955 Amd 3 Swaged Cable-End Assemblies
(UNF Threads) for Preformed NonCorrodible Steel Wire Rope (W.11) for
Aircraft (Replaces BS SP 106: 1953)
1973 Solid Rivets with 100 Degree
Countersunk Truncated Radiused Head Made
from L 86 (Sp 142) and L 37 (Sp 143)
Materials
1979 Unified Aluminium Alloy Washers
(Replaces BS SP 148-50: 1970)
1979 Unified Alloy Steel Washers (Replaces
BS SP 151-53: 1970)
1979 Unified Corrosion- Resistant Steel
Washers (Replaces BS SP 154-56: 1970)
1973 Amd 2 Solid Rivets with Universal
Head Made from L 86 (SP 157 and SP 163),
2SP 168-169
2SP 170-171
2SP 47
2SP 68-71
2SP 7
2SP 77-80
2SP 81-82
2SP 83-85
2SP 87-88
2SP 91-92
2SP 93
2SP 95
2SP 96
2T 57
2T 66
L 58 (SP 160 and SP 161), L 37 (SP 162) and
DTD 204 (SP 158 and SP 159) Materials
(Replaces BS SP 157-163: 1971)
1985 Ferrules and Assembly Wires for
Braided Rubber Cord Assemblies for
Aerospace Use (Replaces BS 2SP 73 and 74:
1966 and BS SP 168-169: 1974)
1985 Amd 1 Braided Rubber Cord
Assemblies for Aerospace Use (Replaces BS
SP 72: 1957 and BS SP 170-171: 1974)
1957 Single Coil Spring Washers for Aircraft
(Replaces BS SP 47: 1952)
1973 Amd 2 100 Degree Countersunk
Precision Head Aluminium and Aluminium
Alloy Rivets for Aircraft (Partially Replaced
by A 273: 1978)
1943 Fork Joints (High Tensile Type)
(Replaces BS SP 7: 1929)
1973 Snap Head Aluminium and Aluminium
Alloy Rivets for Aircraft (Replaces BS SP 77
to SP 80: 1958)
1973 Snap Head High Nickel- Copper Alloy
Rivets for Aircraft (Replaces BS SP 81 and
SP 82: 1958)
1973 Mushroom Head Aluminium Alloy
Rivets for Aircraft (Replaces BS SP 83 to SP
85: 1958)
1973 100 Degree Countersunk Head High
Nickel-Copper Alloy Rivets for Aircraft
1973 Amd 3 Carbon Steel Worm Drive
Clamps for Aircraft (Replaces BS SP 91 and
SP 92: 1962)
1974 Amd 1 Elastomeric Grommets
(Acrylonitrile- Butadiene) for Aerospace Use
(Replaces BS SP 93: 1962)
1974 Amd 1 Elastomeric Grommets
(Polychloroprene) for Aerospace Use (AMD
3515) February 27, 1981 (Replaces BS SP
95: 1965)
1982 Internal Retaining Rings (Imperial
Sizes) (Replaces BS SP 96: 1968)
(OBSOLESCENT) 1972 4/1 NickelChromium Steel Tube (1150 N/Square MM)
(Replaces BS T 57: 1948)
1980 Amd 1 18/10 Chromium-Nickel
Corrosion-Resisting Steel Tube (Niobium
2T 66
2T 68
2TA 10
2TA 100
2TA 100
2TA 11
2TA 12
2TA 13
2TA 1
2TA 1
2TA 21
2TA 22
Stabilized: 550 MPa) (Weldable) (AMD
6853) November 29, 1991 (Replaces BS T
66: 1972)
1980 18/10 Chromium-Nickel CorrosionResisting Steel Tube (Niobium Stabilized:
550 MPa) (Weldable)
1980 Cold Drawn 18/10 Chromium-Nickel
Corrosion-Resisting Steel Tube (Niobium
Stabilized: 800 N/Square mm) (Weldable)
(Replaces BS T 68: 1972)
1974 Amd 2 Sheet of Titanium- AluminiumVanadium Alloy (Tensile Strength 960-1270
MPa) (Replaces BS TA 10: 1968)
1973 Amd 5 Procedure for Inspection and
Testing of Wrought Titanium and Titanium
Alloys AMD 10739; June 2000 ; Supersedes
BSI TA 100; (S)
1973 Amd 4 Procedure for Inspection and
Testing of Wrought Titanium and Titanium
Alloys AMD 4620 July 31, 1984; Supersedes
BSI TA 100; (S)
1974 Bar and Section for Machining of
Titanium- Aluminium-Vanadium Alloy
(Tensile Strength 900 1160 MPa) (Limiting
Ruling Section 150 mm) (Replaces BS TA
11: 1968)
1974 Forging Stock of Titanium-AluminiumVanadium Alloy (Tensile Strength 900-1160
MPa Limiting Ruling Section 150 mm)
(Replaces BS TA 12: 1968)
1974 Forgings of Titanium- AluminumVanadium Alloy (Tensile Strength 900-1160
MPa) (Limiting Ruling Section 150 mm)
(Replaces BS TA 13: 1968)
1974 Amd 2 Sheet and Strip of
Commercially Pure Titanium (Tensile
Strength 290-420 MPa) (Replaces BS TA 1:
1968)
1974 Amd 3 Sheet and Strip of
Commercially Pure Titanium - (Tensile
Strength 290-420 MPa) AMD 10738; April
2000; Supersedes TA 1; (S)
1973 Amd 2 Sheet and Strip of TitaniumCopper Alloy (Tensile Strength 540- 770
N/Square mm) (Replaces BS TA 21: 1968)
(OBSOLESCENT) 1973 Bar and Section for
2TA 23
2TA 24
2TA 28
2TA 2
2TA 2
2TA 3
2TA 4
2TA 5
2TA 6
2TA 7
Machining of Titanium- Copper Alloy
(Tensile Strength 540-770 N/ Square mm)
(Replaces BS TA 22: 1968)
(OBSOLESCENT) 1973 Forging Stock of
Titanium-Copper Alloy (Tensile Strength
540- 770 N/Square mm (Replaces BS TA 23:
1968)
(OBSOLESCENT) 1973 Forging Stock of
Titanium-Copper Alloy (Tensile Strength
540- 770 N/Square mm) Replaces BS TA 24:
1968
1974 Amd 3 Forging Stock and Wire of
Titanium-Aluminium- Vanadium Alloy
(Tensile Strength 1100-1300 MPa) (Limiting
Ruling Section 20 mm) (Primarily Intended
for the Manufacture of Fasteners Complying
with the Requirements of the A' Series of
British Stand
1973 Amd 2 Sheet and Strip of
Commercially Pure Titanium (Tensile
Strength 390-540 N/Square mm) (Replaces
BS TA 2: 1968)
1973 Amd 3 Sheet and Strip of
Commercially Pure Titanium - (Tensile
Strength 390-540 N/mm2) AMD 10740;
April 2000; (S)
(OBSOLESCENT) 1973 Bars and Sections
for Machining of Commercially Pure
Titanium (Tensile Strength 390-540
N/Square MM) Replaces BS TA 3: 1968
(OBSOLESCENT) 1973 Forging Stock of
Commercially Pure Titanium (Tensile
Strength 390-540 N/ Square MM) (Replaces
BS TA 4: 1968)
(OBSOLESCENT) 1973 Forgings of
Commercially Pure Titanium (Tensile
Strength 390-540 N/Square mm) (Replaces
BS TA 5: 1968)
1973 Amd 2 Sheet and Strip of
Commercially Pure Titanium (Tensile
Strength 570-730 N/ Square mm) (Replaces
BS TA 6: 1968)
1973 Bars and Sections for Machining of
Commercially Pure Titanium (Tensile
Strength 540-740 N/ Square mm) (Replaces
BS TA 7: 1968)
2TA 8
2TA 9
2V 35
2V 37
2W 11
2W 12
2X 18
2X 27
2X 32
2X 33
2X 34
3A 100
3A 100
3A 103
3A 105
(OBSOLESCENT) 1973 Forging Stock of
Commercially Pure Titanium (Tensile
Strength 540-740 N/ Square mm) (Replaces
BS TA 8: 1968)
(OBSOLESCENT) 1973 Forgings of
Commercially Pure Titanium (Tensile
Strength 540-740 N/ Square mm) (Replaces
BS TA 9: 1968)
1966 Plywood for Aeronautical Purposes
(Replaces BS V 35: 1947)
1968 Sitka Spruce as Finished Timber
(Replaces BS V 37: 1952)
1967 Preformed Corrosion- Resisting Steel
Wire Rope (Replaces BS W 11: 1946)
1989 Preformed Zinc Coated Carbon Steel
Wire Rope (Metric And Inch Series)
(Replaces BS W 12: 1968 and BS 2W9:
1965)
(OBSOLESCENT) 1965 Amd 1 Shellac
Varnish for Aeronautical Purposes (Replaces
BS X 18:1921)
1991 Cellulose Finishing Scheme for
Aerospace Purposes (Replaces BS X 27:
1966 and BS X 30: 1966)
1998 Pretreatment Etch Primer for Aerospace
Purposes Supersedes X 32: 1991; (S)
1998 Two Component Epoxy Primer for
Aerospace Purposes Supersedes X 33: 1991;
(S)
1998 Two Component Polyurethane Finish
for Aerospace Purposes Supersedes X 34:
1991; (S)
1991 General Requirements for Bolts and
Free Running Nuts of Tensile Strength not
Exceeding 1249 MPa (Supersedes 2A 100:
1968) (S)
1991 Amd 1 General Requirements for Bolts
and Free Running Nuts of Tensile Strength
not Exceeding 1249 MPa (AMD 7661) April
15, 1993 (S)
1962 Amd 3 Steel Nuts (Unified Hexagons
and Unified Threads) (Ordinary, Thin,
Slotted and Castle) for Aircraft (Replaces BS
2A 103: 1956)
1962 Corrosion-Resisting Steel Nuts (Unified
Hexagons and Unified Threads) (Ordinary,
3A 107
3A 108
3A 109
3A 116
3A 117
3A 125-132
3A 171
3A 212
3C 7
3F 111
3F 111
3F 114
3F 116
3F 119
Thin, Slotted and Castle) for Aircraft
(Replaces BS 2A 105: 1956)
1962 Amd 1 Aluminium Alloy Nuts (Unified
Hexagons and Unified Threads) (Ordinary
and Slotted) for Aircraft (Replaces BS 2A
107: 1956)
1962 Amd 4 Steel Bolts (Unified Hexagons
with Unified Threads) (with Tolerance
Shanks for Aircraft) (Replaces BS 2A 108:
1956)
1985 Amd 1 Steel Bolts (Unified Hexagons
and Unified Threads) (AMD 5563) July 29,
1988 (Replaces BS 2A 109: 1962)
1962 Amd 4 Steel Pan Head Bolts (Unified
Threads) for Aircraft (AMD 5386) June 30,
1988 (Replaces BS 2A 116: 1956)
1962 Amd 1 Corrosion-Resisting Steel Pan
Head Bolts (Unified Threads) for Aircraft
(Replaces BS 2A 117: 1956)
1981 3A 136-143, 3A 147-168, 3A 180-181,
3A 186-187, 3A 192-193, 3A 200-201, 2A
213-216 Stiffnuts (Unified Threads) for
Aircraft (Replaces BS 2A 125 to 2A 132, 2A
136 to 2A 143, 2A 147 to 2A 168, 2A 180,
2A 181, 2A 192, 2A 193, 2A 186, 2A 187,
2A 200, 2A
1962 Amd 1 Aluminium Alloy Pan Head
Bolts (Unified Threads) for Aircraft
(Replaces BS 2A 171: 1956)
1993 Cadmium-Plated Steel Bolts, 55/65
Tonf/ Square Inches (Unified Hexagons, 3A
Unified Threads and Close Tolerance
Shanks) (Supersedes 2A 212: 1973) (S)
1989 Aircraft Tyre Valves: Interchangeability
Dimensions (Replaces BS 2C 7: 1984)
1991 Amd 1 Flax Harness Webbing for
Aerospace Purposes (AMD 7222) August 15,
1992 (S)
1991 Flax Harness Webbing for Aerospace
Purposes (Supersedes 2F 111: 1973) (S)
1995 80 g/m2 Cotton Madapolam Fabric
(Replaces BS 2F 114: 1975) (S)
1995 Mercerized Cotton Fabric (Replaces BS
2F 116: 1975) (S)
1990 145 G/Square Metres to 235 G/square
Metres Nylon Parachute Fabric (Replaces BS
3F 120
3F 121
3F 122
3F 63
3F 65
3F 68
3F 70
3F 71
3G 100 PART 3
3G 100PT 2: SEC 2
3G 100PT 2: SUBSEC 3.0
3G 100PT 2: SUBSEC 3.1
3G 100PT 2: SUBSEC 3.10
3G 100PT 2: SUBSEC 3.11
2F 119: 1982)
1987 Continuous Filament Nylon Sewing
Threads for Aerospace Purposes
1995 Metallic Slide Fasteners for Aerospace
Purposes (Replaces BS 2F 121: 1989) (S)
1989 Two Ply Cotton Fabric Interlayered
with Polychloroprene for Liferaft Packs
1981 Amd 2 Low Pressure Oxygen Hose for
Aeronautical Purposes
1991 Flexible Corrugated Oxygen and Air
Tubes for Aircraft (Natural or Synthetic
Polyisoprene) (Replaces BS 2F 65: 1981)
1977 Amd 3 Controlled Storage of
Vulcanized Rubbers for Use in Aerospace
Applications (Superseding 2F 68: 1973)
(AMD 6803) September 30, 1991 (Replaces
BS 2F 68: 1973)
1991 Heavy Duty Braided Rubber Cord
(Replaces BS 2F 70: 1983)
1991 Light Duty Braided Rubber Cord
(Replaces BS 2F 71: 1983)
1979 Amd 1 General Requirements for
Equipment for Use in Aircraft Part 3:
Characteristics of Aircraft Electrical Power
Supplies AMD 4425: December 1983; (S)
1972 Amd 1 General Requirements for
Equipment for Use in Aircraft Part 2: All
Equipment Section 2: Magnetic Influence
(Partially Replaces 2G 100: Part 2: 1962)
1972 Amd 1 General Requirements for
Equipment for Use in Aircraft Part 2: All
Equipment Section 3: Environmental
Conditions Subsection 3.0: Standard Test
Requirements (Partially Replaces 2G 100:
Part 2: 1962)
1969 Amd 1 General Requirements for
Equipment for Use in Aircraft Part 2: All
Equipment Section 3: Environmental
Conditions Subsection 3.1: Vibration
(Partially Replaces 2G 100: Part 2: 1962)
1974 General Requirements for Equipment
for Use in Aircraft Part 2: All Equipment
Section 3: Environmental Conditions
Subsection 3.10: Impact Icing
1973 General Requirements for Equipment
for Use in Aircraft Part 2: All Equipment
3G 100PT 2: SUBSEC 3.12
3G 100PT 2: SUBSEC 3.13
3G 100PT 2: SUBSEC 3.14
3G 100PT 2: SUBSEC 3.15
3G 100PT 2: SUBSEC 3.2
3G 100PT 4: SEC 1
3G 101
3G 148
3G 197
3G 231
3G 100PT 2: SUBSEC 3.3
Section 3: Environmental Conditions
Subsection 3.11: Waterproofness (Partially
Replaces 2G 100: Part 2: 1962)
1991 General Requirements for Equipment
for Use on Aircraft Part 2: All Equipment
Section 3: Environmental Conditions
Subsection 3.12: Fluid Contamination
1973 General Requirements for Equipment
for Use in Aircraft Part 2: All Equipment
Section 3: Environmental Conditions
Subsection 3.13: Resistance to Fire in
Designated Fire Zones (Partially Replaces 2G
100: Part 2: 1962)
1973 General Requirements for Equipment
for Use in Aircraft Part 2: All Equipment
Section 3: Environmental Conditions
Subsection 3.14: Acoustic Vibration
1978 General Requirements for Equipment
for Use in Aircraft Part 2: All Equipment
Section 3: Environmental Conditions
Subsection 3.15: Change of Temperature
1970 Amd 2 General Requirements for
Equipment for Use in Aircraft Part 2: All
Equipment Section 3: Environmental
Conditions Subsection 3.2: TemperaturePressure Requirements (Partially Replaces
2G 100: Part 2: 1962)
1973 General Requirements for Equipment
for Use in Aircraft Part 4: Electrical
Equipment Section 1: Construction and
General
1987 General Requirements for Mechanical
and Electromechanical Aircraft Indicators
(Replaces BS 2G 100: 1975)
1981 General Purpose Platinum Temperature
Sensors for Aircraft (Replaces BS 2G 148:
1963)
1982 Stud-Type Terminal Blocks for
Terminations on Aircraft Electric Cables
(Replaces BS 2G 197: 1978)
1997 Conductors for General-Purpose
Aircraft Electrical Cables and Aerospace
Applications Supersedes 2G 231: 1990; (S)
1972 Amd 1 General Requirements for
Equipment for Use in Aircraft Part 2: All
Equipment Section 3: Environmental
3G 100PT 2: SUBSEC 3.4
3G 100PT 2: SUBSEC 3.5
3G 100PT 2: SUBSEC 3.6
3G 100PT 2: SUBSEC 3.7
3G 100PT 2: SUBSEC 3.8
3G 100PT 2: SUBSEC 3.9
3G 100PT 4: SEC 2
3G 100PT 4: SUBSEC 1.1
3G 198 PART 2
Conditions Subsection 3.3: Mould Growth
(Partially Replaces 2G 100: Part 2: 1962)
1972 General Requirements for Equipment
for Use in Aircraft Part 2: All Equipment
Section 3: Environmental Conditions
Subsection 3.4: Differential Pressure
Requirements (Partially Replaces 2G 100:
Part 2: 1962)
1972 General Requirements for Equipment
for Use in Aircraft Part 2: All Equipment
Section 3: Environmental Conditions
Subsection 3.5: Explosion-Proofness
(Partially Replaces 2G 100: Part 2: 1962)
1972 Amd 1 General Requirements for
Equipment for Use in Aircraft Part 2: All
Equipment Section 3: Environmental
Conditions Subsection 3.6: Acceleration
Requirements (Partially Replaces 2G 100:
Part 2: 1962)
1972 General Requirements for Equipment
for Use in Aircraft Part 2: All Equipment
Section 3: Environmental Conditions
Subsection 3.7: Tropical Exposure (Partially
Replaces 2G 100: Part 2: 1962)
1972 Amd 1 General Requirements for
Equipment for Use in Aircraft Part 2: All
Equipment Section 3: Environmental
Conditions Subsection 3.8: Salt Mist
(Partially Replaces 2G 100: Part 2: 1962)
1972 General Requirements for Equipment
for Use in Aircraft Part 2: All Equipment
Section 3: Environmental Conditions
Subsection 3.9: Ice Formation (Partially
Replaces 2G 100: Part 2: 1962)
(OBSOLESCENT) 1980 Amd 1 General
Requirements for Equipment for Use in
Aircraft Part 4: Electrical Equipment Section
2: Electromagnetic Interference at Radio and
Audio Frequencies
1982 General Requirements for Equipment
for Use in Aircraft Part 4: Electrical
Equipment Section 1: Construction and
General Subsection 1.1: Electrical Insulation
Tests
1997 Sleeves and Moulded Components for
Aircraft Electric Cables and Equipment
3G 198 PART 4
3G 198 PART 4
3G 210
3G 233
3HR 100
3HR 100
3HR 100
3J 12
3HR 601
3L 122
3L 124
Wires Part 2: Specification for Slip-On
Sleeves for Identification Purposes
Supersedes BS 2G 198: Part 2: 1982; (S)
1996 Sleeves and Moulded Components for
Aircraft Electric Cables and Equipment
Wires Part 4: Specification for
Fluoropolymer Heat Shrinkable Sleeving for
Binding and Insulation (S)
1996 Amd 1 Sleeves and Moulded
Compounds for Aircraft Electric Cables and
Equipment Wires Part 4: Specification for
Fluoropolymer Heat Shrinkable Sleeving for
Binding and Insulation AMD 9769; February
15, 1998; (S)
1996 PTFE Insulated Equipment Wires and
Cables, Single- and Multi-Core, with Silver
Plated Copper Conductors (190 Degrees C)
or Nickel Plated Copper Conductors (260
Degrees C) (S)
1990 Electric Cables for General Airframe or
Equipment Interconnect Use (135 Degrees
Celsius), Extruded Insulation
1978 Amd 3 Inspection and Testing
Procedure for Aerospace Material. Wrought
Heat Resisting Alloys
1978 Amd 4 Inspection and Testing of
Wrought Heat-Resisting Alloys (AMD 7514)
January 15, 1993
1978 Amd 5 Inspection and Testing of
Wrought Heat-Resisting Alloys AMD 8999;
March 15, 1996; (S)
1991 Pressure - Sensitive Adhesive
Identification Tape (Replaces BS 2J 12:
1975)
1989 Amd 1 Ni-Cr-Ti-Al Heat- Resisting
Alloy Bar Wire Manufacture of Fasteners
(Max Diameter or Minor Sectional
Dimension 30 mm) (Nickel Base Cr 19.5-Ti
2.2-Al 1.4) (AMD 6529) May 31, 1990
(Replaces BS 2HR 601: 1975)
1970 Ingots and Castings of Magnesium-8
Per Cent Aluminium-Zinc- Manganese Alloy
(Solution Treated) (Replaces BS 2L 122:
1959)
(OBSOLESCENT) 1970 Ingots and Castings
of Magnesium-10 Per Cent Aluminium-Zinc-
3L 125
3L 51
3L 58
3L 63
3L 78
3L 80
3L 81
3L 86
3M 45-2
3M 45-2
3M 60
Manganese Alloy (Solution Treated)
(Replaces BS 2L 124: 1959)
(OBSOLESCENT) 1970 Ingots and Castings
of Magnesium-10 Per Cent Aluminium-ZincManganese Alloy (Solution Treated and
Precipitation Treated) (Replaces BS 2L 125:
1959)
(OBSOLESCENT) 1970 AMD 1 Ingots and
Castings of Aluminium-Silicon- CopperIron-Nickel- Magnesium Alloy (Precipitation
Treated) (Replaces BS 2L 51: 1959)
(OBSOLESCENT) 1971 Wire for Solid,
Cold- Forged Rivets of Aluminium 5 Per
Cent Magnesium Alloy (Not Exceeding 10
mm Diameter)
1971 Tube of Aluminium- CopperMagnesium- Silicon-Manganese Alloy
(Solution Treated and Precipitation Treated
(Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
(OBSOLESCENT) 1970 AMD 1 Ingots and
Castings of Aluminium-Silicon- CopperMagnesium Alloy (Solution Treated and
Precipitation Treated) (Replaces BS 2L78:
1967)
(OBSOLESCENT) 1985 Sheet and Strip of
Aluminium-2 1/4% Magnesium Alloy
(Temper Designation -0) (Replaces BS 2L
80: 1973)
(OBSOLESCENT) 1985 Sheet and Strip of
Aluminium-2 1/4% Magnesium Alloy
(Temper Designation H16 or H26) (Replaces
BS 2L 81: 1973)
1971 Wire for Solid, Cold- Forged Rivets of
Aluminium-Copper- Magnesium Alloy (Not
Exceeding 10 mm Diameter) (Cu 2.5, Mg
0.3) (Replaces BS 2L 86: 1967)
1998 Aircraft Tyres and Rims - Part 2: Test
Methods for Tyres Supersedes BS 2M 45-2:
1986; ISO 3324-2: 1998; (S)
1998 Amd 1 Aircraft Tyres and Rims - Part
2: Test Methods for Tyres AMD 10487;
October 1999; Supersedes BS 2M 45-2:
1986; ISO 3324-2: 1998; (S)
1998 Aerospace - Separable Tube Fittings for
Fluid Systems, 24 Degrees Cone - General
Specification Supersedes 2M 60: 1993; ISO
3N 3
3S 105
3S 132
3S 144
3S 144
3S 145
3S 500
3S 500
3S 145
3S 91
3S 95
3SP 3
7169; (S)
2000 Breathing Oxygen for Airborne
Application Supersedes BS 2N 3: 1990; (S)
(OBSOLESCENT) 1969 Carbon Steel (Bar
for the Forged Bolts Only) (Replaces BS 2S
105: 1964)
1976 Amd 2 3 Per Cent ChromiumMolybdenum-Vanadium Steel Billets, Bars,
Forgings and Parts (1320-1470 MPa:
Limiting Ruling Section 70 mm) (Suitable
for Nitriding) (Replaces BS 2S 132: 1969)
1995 Chromium-Nickel-CopperMolybdenum Corrosion Resisting Steel
(Precipitation Hardening) Billets, Bars,
Forgings and Parts (1130-1330 MPa)
(Supersedes BS 2S 144: 1976) (S)
1995 Amd 1 Chromium-Nickel-CopperMolybdenum Corrosion Resisting Steel
(Precipitation Hardening) Billets, Bars,
Forgings and Parts (1130 MPa to 1330 MPa)
AMD 8996; July 1996; Revision of BS 2S
144: 1976; (S)
1996 Chromium-Nickel-CopperMolybdenum Corrosion Resisting Steel
(Precipitation Hardening) Billets, Bars,
Forgings and Parts (1270 MPa to 1470 MPa)
(S)
1996 Procedure for Inspection, Testing and
Acceptance of Steel Sheet and Strip (S)
1996 Amd 1 Procedure for Inspection,
Testing and Acceptance of Steel Sheet and
Strip AMD 9327; February 15, 1997; (S)
1996 Amd 1 Chromium-Nickel-CopperMolybdenum Corrosion Resisting Steel
(Precipitation Hardening) Billets, Bars,
Forgings and Parts (1270 MPa to 1470 MPa)
AMD 9768; February 15, 1998; Supersedes
BS 2S 145: 1976; (S)
1977 Mild Steel Billets, Bars, Forgings and
Parts (Suitable for Bearing Shells) (Replaces
BS 2S 91: 1964)
(OBSOLESCENT) 1967 1 1/2 Per Cent
Nickel- Chromium Molybdenum Steel
(Replaces BS 2S 95: 1964)
1943 Amd 3 Fork Joints (Low Tensile Type)
(Replaces BS 2SP 3: 1929)
3SP 89
3T 100
3T 51
3T 53
3T 60
3V 4
4A 111
4A 112
4A 113
4A 113
4A 114
4A 170
4A 228
4A 4
4A 4
1983 Characteristics, Boundary Dimensions,
Tolerances and Static Load Ratings of
Airframe Bearings
1978 Amd 2 Procedure for Inspection and
Testing of Steel Tubes (AMD 6854)
November 29, 1991 (Replaces BS 2T 100:
1972)
(OBSOLESCENT) 1945 High-Pressure
Seamless Copper Tubes (Replaces BS 2T 51)
1980 Chromium-Molybdenum Steel Tube
(700 MPa) (Tube 12.5 mm Outside Diameter
and Greater) (Weldable) (Replaces BS 2T 53:
1972)
1980 Chromium-Molybdenum Steel Tube
(1150 MPa) (Maximum Wall Thickness 8
mm) (Replaces BS 2T 60: 1972)
1929 Amd 3 Ash (Replaces BS 2V 4: 1939)
1993 Cadmium-Plated Steel Bolts (Unified
Hexagons and Unified Threads) with Close
Tolerance Shanks (Supersedes 3A 111: 1962)
(S)
1992 Cadmium-Plated Steel Shear Bolts
(Unified Hexagons and Unified Threads)
(Supersedes 3A 112: 1985)
1999 Specification for Cadmium-Plated,
Mushroom-Headed, Unified-Thread, Slotted
Drive, Bolts Supersedes 3A 113: 1962; (S)
1999 Amd 1 Specification for CadmiumPlated, Mushroom-Headed, Unified-Thread,
Slotted Drive, Bolts AMD 10624; November
1999; Supersedes BS 3A 113:1962; (S)
1999 Specification for Corrosion-Resisting
Steel, Mushroom-Headed, Slotted-Drive,
Bolts (Strength a Class 880/1080) Supersedes
3A 114: 1962; (S)
1999 Specification for Aluminium Alloy,
Mushroom-Headed, Slotted Drive, Bolts
(Unified Threads) Supersedes 3A 170: 1999;
(S)
1997 Steel Double Hexagon Bolts - 1250
MPa (180,000 lbf/in2) for Aircraft
Supersedes 3A 288: 1979; (S)
1966 Amd 1 Test Pieces and Test Methods
for Metallic Materials for Aircraft
1966 Amd 2 Test Pieces and Test Methods
for Metallic Materials for Aircraft (AMD
4A 4
4A 4PT1: SEC 2
4A 4PT1: SEC 3
4C 14
4F 100
4F 118
4F 120
4F 123
4F 124
4F 33
4F 54
4F 57
4F 58
4F 59
4G 173 PART 1
7710) June 15, 1993 (Replaces BS 3A 4:
1949 Partially Replaced by BS 18: 1987) (S)
1966 Amd 3 Test Pieces and Test Methods
for Metallic Materials for Aircraft (AMD
7919) November 15, 1993 (S)
1967 Amd 1 Test Pieces and Test Methods
for Metallic Materials for Aircraft Part 1:
Tensile Tests Section 2: Elevated
Temperature
1967 Amd 1 Test Pieces and Test Methods
for Metallic Materials for Aircraft Part 1:
Tensile Tests Section 3: Uninterrupted Creep
and Rupture Tests
1991 Aircraft Pressure Refuelling Connectors
(ISO 45: 1990) (Replaces BS 3C 14: 1982)
1982 Amd 1 Inspection and Testing of
Textiles
1990 50 G/Square Meters Nylon Parachute
Fabric (Replaces BS 3F 118: 1980)
1993 Continuous Filament Nylon Sewing
Threads for Aerospace Purposes (Supersedes
BS 3F 120: 1987) (S)
1996 Woven Nylon Narrow Fabrics for
Aerospace Purposes (Nominally 235 Dtex
Yarns) (S)
1996 Woven Nylon 6.6 Narrow Fabrics for
Aerospace Purposes (Nominally 940 dtex
Yarns) (S)
(OBSOLESCENT) 1961 Amd 1 Flexible
Cotton Rope for Aeronautical Purposes
(Replaces BS 3F 33: 1936)
1985 Amd 1 Heavy Duty Linen (Flax)
Sewing Thread for Aerospace Purposes
(AMD 6079) October 31, 1989 (Replaces BS
3F 54: 1975)
1990 Scoured Cotton Fabric for Inflatable
Equipment for Aerospace Purposes Replaces
BS 3F 57: 1975
1990 Cotton Thread for Aerospace Purposes
(Replaces BS 3F 58: 1975)
1985 Amd 1 Braided Linen (Flax) Cord for
Aerospace Purposes (Replaces BS 3F 59:
1975)
1985 Connectors for Ground Electrical
Supplies for Aircraft Part 1: Design,
Performance and Test Requirements
4G 173 PART 2
4G 178 PART 2
4G 198-3
4G 198 PART 1
4G 229
4J 10
4J 11
4J 11
4K 6
4L 100
4L 100
4L 100
4L 101
(Replaces BS 3G 173: 1972)
1985 Connectors for Ground Electrical
Supplies for Aircraft Part 2: Dimensions
(Replaces BS 3G 173: 1972)
1986 Crimped Joints for Aircraft Electrical
Cables and Wires Part 2: Control of
Crimping (Including User Control Tests)
(Replaces BS 3G 178: 1972)
1999 Sleeves and Moulded Components for
Airccraft Electric Cables and Equipment
Wires - Part 3: Specification for HeatShrinkable sleeving for Binging, Insulation,
and Identification (S)
1997 Sleeves and Moulded Components for
Aircraft Electric Cables and Equipment
Wires Part 1: Specification for Elastomeric
Sleeves for Binding and Identification (S);
Supersedes 3G 198: Part 1: 1989
1996 Schedule for Environmental Conditions
and Test Procedures for Airborne Equipment
(ISO 7137: 1995) (S)
1991 Pressure - Sensitive Adhesive WaterResistant PVC Tape (Replaces BS 3J 10:
1975)
1991 Pressure - Sensitive Adhesive Paper
Masking Tape (Replaces 3J 11: 1975)
1991 Amd 1 Pressure - Sensitive Adhesive
Paper Masking Tape (AMD 8217) July 15,
1994 (Replaces BS 3J 11: 1975) (S)
(OBSOLESCENT) 1928 Cast Iron Piston
Ring Pots (Replaces bs 3K 6: 1925)
1993 Procedure for Inspection, Testing and
Acceptance of Wrought Aluminium and
Aluminium Alloys (Supersedes 3L 100:
1971) (S)
1993 Amd 1 Procedure for Inspection,
Testing and Acceptance of Wrought
Aluminium and Aluminium Alloys (AMD
7884) September 15, 1993 (S)
1993 Amd 2 Procedure for Inspection,
Testing and Acceptance of Wrought
Aluminium and Aluminium Alloys (AMD
8717) November 15, 1995 (S)
1990 Procedure for Inspection, Testing and
Acceptance of Aluminium- Base and
Magnesium-Base Ingots and Castings
4L 54
4L 59
4L 60
4L 61
4M 45-1
4M 45-1
4L 56
4N 100-1
4N 100-2
4N 100-3
4N 100-4
4N 100-5
(Replaces BS 3L 101: 1970)
1986 Amd 1 Tube of 99% Aluminium (Cold
Drawn: Seamless: Tested Hydraulically) (Not
Exceeding 12 mm Wall Thickness) (AMD
5994) August 31, 1988 (Replaces BS 3L 54:
1971)
1985 Sheet and Strip of AluminiumManganese Alloy (Temper Designation H16
to H26) (Replaces BS 3L 59: 1973)
(OBSOLESCENT) 1985 Sheet and Strip of
Aluminium-Manganese Alloy (Temper
Designation H12 or H22) (Replaces BS 3L
60: 1973)
(OBSOLESCENT) 1985 Sheet and Strip of
Aluminium-Manganese Alloy (Temper
Designation -0) (Replaces BS 3L 61: 1973)
1998 Aircraft Tyres and Rims - Part 1:
Specifications Supersedes 3M 45-1: 1994;
ISO 3324-1: 1997; (S)
1998 Amd 1 Aircraft Tyres and Rims - Part
1: Specifications AMD 10360; March 15,
1999; Supersedes 3M 45-1: 1994; ISO 33241: 1997; (S)
1986 Amd 1 Tube of Aluminium - 2 1/4%
Magnesium Alloy (Temper Designation - 0)
(Seamless: Tested Hydraulically) (Not
Exceeding 12 mm Wall Thickness) (AMD
5993) August 31, 1988 (Replaces BS 3L56:
1971)
1999 Aircraft Oxygen Systems and
Equipment - Part 1: Design and Installation
Partially Supersedes BS 3N 100; (S)
1999 Aircraft Oxygen Systems and
Equipment - Part 2: Testing of Equipment
and Systems (S)
1999 Aircraft Oxygen Systems and
Equipment - Part 3: Guide to the
Physiological Factors (S)
1999 Aircraft Oxygen Systems and
Equipment - Part 4: Guide to the
Physiological Factors Partially Supersedes
BS 3N 100; (S)
1999 Aircraft Oxygen Systems and
Equipment - Part 5: Guidance and
Recommendations on the Selection of
Materials for Use with Oxygen (S)
4N 100-6
4N 100-7
4S 106
4S 14
4S 28
4T 100
4T 45
5F 100
5F 49
5F 49
5G 178 PART 1
5L 34
5L 36
5L 44
1999 Aircraft Oxygen Systems and
Equipment - Part 6: Guide to Cleaning
Labelling and Packaging (S)
1999 Aircraft Oxygen Systems and
Equipment - Part 7: Guide to Cleaning
Labelling and Packaging (S)
1976 Amd 1 3 Per Cent ChromiumMolybdenum Steel Billets, Bars, Forgings
and Parts (930-1080 MPa: Limiting Ruling
Section 150 mm) (Suitable for Nitriding)
(Replaces BS 3S 106: 1969)
(OBSOLESCENT) 1964 Carbon CaseHardening Steel (Replaces BS 3S 14: 1949)
(OBSOLESCENT) 1964 Amd 2 4 Per Cent
Nickel-Chromium-Molybdenum Steel (Air
Hardening) Replaces BS 3S 28: 1949; AMD
2541; April 30, 1980; (S)
Procedure for Inspection, Testing and
Acceptance of Seamless Steel Tubes and
Tubestock (S)
(OBSOLESCENT) 1972 Carbon-Manganese
Steel Tube (700 N/Square mm) (Tube 12.5
mm Outside Diameter and Greater)
(Weldable) (Replaces BS 3T 45: 1948)
1991 Inspection and Testing of Textiles for
Aerospace Purposes (Replaces BS 4F 100:
1982)
1991 Shuttle Woven Cotton Webbing for
Aerospace Purposes (Replaces BS 4F 49:
1984)
1991 Amd 1 Shuttle Woven Cotton Webbing
for Aerospace Purposes (AMD 7221) August
15, 1992 (Replaces BS 4F 49: 1984)
1993 Crimped Joints for Aircraft Electrical
Cables and Wires Part 1: Specification for
Design Requirements (Including Tests) for
Components and Tools (Supersedes 4G 178:
Part 1: 1984) (S)
(OBSOLESCENT) 1985 Forging Stock,
Bars, Extruded Sections and Forgings of 99%
Aluminium (Replaces BS 4L 34: 1973)
1985 Wire for Solid, Cold Forged Rivets of
99.5% Aluminium (Not Exceeding 10 mm
Diameter) (Replaces BS 4L 34: 1973)
(OBSOLESCENT) 1985 Forging Stock,
Bars, Extruded Sections and Forgings of
5M 23
5S 100
5S 15
5S 21
5S 82
5S 100
5S 99
5T 2
5V 7
5X 17
6F 100
6F 100
6F 34
Aluminium - 2 1/4% Magnesium Alloy
(Replaces BS 4L 44: 1973)
1987 Amd 1 Specification for an
Identification Scheme for Pipelines (AMD
6071) July 31, 1989 (Replaces BS 4M 23:
1977)
1993 Inspection, Testing and Acceptance of
Wrought Steels (Other Than Plate, Sheet,
Strip and Tube) Corrected and Reprinted,
April 1999; Supersedes BS 4S 100: 1975; (S)
(OBSOLESCENT) 1964 Amd 1 3 Per Cent
Nickel Case- Hardening Steel Replaces BS
4S 15: 1949; (S)
(OBSOLESCENT) 1964 '20' Carbon Steel
(Suitable for Welding) (Replaces BS 4S 21:
1949)
1976 Amd 2 4 Per Cent Nickel- ChromiumMolybdenum Case-Hardening Steel Billets,
Bars, Forgings and Parts (1320-1520 MPa)
(Replaces BS 4S 82: 1969)
1993 Amd 1 Inspection, Testing and
Acceptance of Wrought Steels (Other Than
Plate, Sheet, Strip and Tube) AMD 10292/r;
February 15, 1999; Corrected and Reprinted,
April 1999; Supersedes 4S 100: 1975; (S)
1994 2.5 Percent Nickel- ChromiumMolybdenum (High Carbon)Steel Billets,
Bars, Forgings and Parts (1230-1420 MPa:
Limiting Ruling Section 150 mm)
(Supersedes 4S 99 1976) (S)
(OBSOLESCENT) 1972 4/1 NickelChromium Steel Tube (1300 N/Square mm)
Replaces BS 4T 2: 1948
(OBSOLESCENT) 1952 Amd 2 Mahogany
for Use in Airscrews (Replaces BS 4V 7:
1932)
1998 Oleoresinous Varnish for Aerospace
Purposes Supersedes 4X 17: 1986; (S)
1998 Procedure for Inspection and Testing of
Textiles for Aerospace Purposes Supersedes
BS 5F 100: 1991; (S)
1998 Amd 1 Procedure for Inspection and
Testing of Textiles for Aerospace Purposes
AMD 10520; October 1999; Supersedes BS
5F 100: 1991; (S)
1984 Amd 1 Light and Medium Duty Linen
6F 37
6F 55
6G 205 PART 1
6L 16
6L 17
6S 80
6SP 4
6V 3
6W 8
7F 35
7F 47
7F 8
7L 37
7S 1
(Flax) Sewing Thread for Aerospace
Purposes (AMD 6069) November 30, 1989
(Replaces BS 5F 34: 1975)
1990 570g/Metric Square and 640g/Metric
Square Cotton Canvas Fabrics for Aerospace
Purposes (Replaces BS 5f 37: 1981)
1991 345g/m2 and 415g/m2 Cotton Canvas
Fabrics Suitable for Aerospace Purposes
(Replaces BS 5F 55: 1982)
1995 Secondary Batteries for Aircraft Part 1:
Specification for Lead-Acid Batteries
(Replaces BS 5G 205: Part 1: 1990) (S)
1985 Sheet and trip of 99% Aluminium
(Temper Designation H14 or H24) (Replaces
BS 5L 16: 1973)
1985 Sheet and Strip of 99% Aluminium
(Temper Designation - 0) (Replaces BS 5L
17: 1973)
1990 Amd 1 High Chromium-Nickel
Corrosion-Resisting Steel Forging Stock,
Bars, Forgings and Parts (880-1080 MPa,
Limiting Ruling Section 100 mm) (AMD
6396) September 30, 1991 (Replaces BS 5S
80: 1976)
2000 Pins Headed, Plain Shank, Drilled,
Steel Alloy and Corrosion Resisting Steel
with a Strength Class 880/1 080 MPa
Supersedes 5SP 4: 1944; (S)
1943 Amd 3 High Strength Plywood for
Aircraft (Replaces BS 5V3: 1939)
1938 Tie Rods (Swaged) for Aircraft
Purposes (Replaces BS 5W 8: 1928)
1985 Amd 1 Braided Linen (Flax) Lacing
Cord for Aerospace Purposes (AMD 6068)
October 31, 1989 (Replaces BS 6F 35: 1975)
1990 Cotton Tape for Aerospace Purposes
(Replaces 6F 47: 1983)
1992 140 g /m2 Mercerized Cotton Fabrics
and Serrated Edge Strip for Aerospace
Purposes (Replaces BS 6F8: 1975)
1989 Amd 1 Wire for Solid Cold- Forged
Rivets of Aluminium-Copper- MagnesiumSilicon- Manganese Alloy (AMD 6625)
December 21, 1990 (Replaces BS 6L 37:
1971)
(OBSOLESCENT) 1964 Carbon Steel Bright
9F 1
A 101
A 119
A 120
A 211
A 22
A 226
A 227
A 232
A 233-A 236
A 233-A 236
A 237-A 240
A 237-A 240
A 241
A 242-A 245
A 246-A 249
A 250-A 253
A 254-A 259
Bars for Machining (Replaces BS 6S 1:
1953)
1992 140 g/m2 Linen (Flax) Fabric and
Serrated Edge Strip for Aerospace Purposes
(Replaces BS 8 F1: 1975)
1969 Amd 2 General Requirements for
Titanium Bolts
(OBSOLESCENT) 1954 Amd 4 90 Degrees
Countersunk Head Steel Bolts (UNF
Threads) for Aircraft
(OBSOLESCENT) 1954 90 Degrees
Countersunk Head Corrosion- Resisting Steel
Bolts (UNF Threads) for Aircraft
1961 Amd 4 100 Degree Countersunk Head
Steel Bolts (Unified Threads and Cruciform
Recesses) for Aircraft (Partially Replaced by
A 273: 1978)
1947 Units of Measurement in Civil Aviation
1965 Amd 2 Steel Hexagon Head Bolts
(Short Thread: Class 3A)
1965 Amd 1 Steel Pan Head Bolts (Short
Thread: Class 3A)
1968 Amd 4 100 Degree Countersunk Head
Steel Bolts (160 000 Lbf/Square Inches (110
hbar) with Torq-Set Recesses)
1971 Amd 1 Plain Hexagonal Thin Nuts (of
Class 3B UNJ Thread)
1971 Amd 2 Plain Hexagonal Thin Nut (of
Class 3B UNJ Thread) (AMD 7769) August
15, 1993 (S)
1971 Amd 2 Plain Hexagonal Nut (of Class
3B UNJ Thread) (AMD 7770) August 15,
1993 (S)
1971 Amd 1 Plain Hexagon Nuts (of Class
3B UNJ Thread)
1973 Amd 3 General Requirements for Steel
Protruding-Head Bolts of Tensile Strength
1250 MPa (180 000 Lbf/Square Inches) or
Greater
1974 Hexagonal Castle Nuts (of Class 3B
UNJ Thread)
1974 Slotted Hexagonal Thick Nuts (of Class
3B UNJ Thread)
1974 Slotted Hexagonal Shear Nuts (of Class
3B UNJ Thread)
1976 Amd 2 Hexagonal Head Titanium
A 260-A 265
A 266-A 271
A 272
A 273
A 275-A 280
A 281-A 286
A 287-292
A 293
A 297
A 298
A 299
A 300
A 301
A 305
A 306
Alloy Bolts 160 000 Lbf/ Square Inches
(1100 MPa)
1976 Amd 2 Specification for Metric Screws
1977 Amd 1 100 Degree Countersunk Head
Titanium Alloy Bolts 160 000 Lbf/Square
Inches (1100 MPa) with Hi-Torque Speed
Drive Recesses
1977 Hi-Torque Speed Drive Recess:
Dimensions and Gauging for Countersunk
Head Fasteners (Replaces BS A 230: 1968)
1978 Gauging Practice for 100 Degree
Countersunk Head Fasteners for Flushness
Control (Replaces A 173: 1956, A 174: 1956,
A 175; 1956, A 230: 1968, and Appendix A
211: 1961 and 2SP 68 to 2SP 71: 1973)
1981 Amd 1 Hexagon Self-Locking Nuts
with Non-Metallic Locking Inserts. Metric
Series
1981 Hexagon (Thin) Self- Locking Nuts
with Non- Metallic Locking Inserts. Metric
Series
1982 Hexagon Socket Head Cap Screws.
Metric Series
1983 Amd 1 Procurement of Self- Locking
Nuts with Non-Metallic Locking Element.
Metric Series (AMD 5767) April 30, 1990
1987 Internal Drive, Offset Cruciform Recess
(Torq-Set) for Rotary Fastening Devices.
Metric Series
1988 Methods of Test for Self-Locking Nuts
with Maximum Operating Temperature
Greater than 425 Degrees C
1989 Procurement of Alloy Steel Protruding
Lead Bolts with Strength Classification 250
MPa and MJ Threads
1989 Procurement of Alloy Steel Bolts with
Strength Classification 1100 MPa and MJ
Threads
1989 Procurement of Corrosion and HeatResisting Steel Bolts with Strength
Classification 1100 MPa and MJ Threads
1994 Bolts- Test Methods (ISO 7961: 1994)
(S)
1994 Rivets, Solid, Universal Head, Metallic
Material, With or Without Surface Treatment
- Dimensions (ISO 8280: 1993) (S)
A 31-A 54
A 323
A 325
A 326
A 303
A 304
A 307
A 308
A 309
A 310
(OBSOLESCENT) 1951 British Association
(B.A.) Low Screws and Nuts for
Aeronautical Purposes
1998 Aerospace - Bihexagonal Drives Wrenching Configuration - Metric Series ISO
4095: 1998; (S)
1998 Lockwire - Diameters ISO 245: 1998;
(S)
1998 Rivets, Solid, 100 Degrees Normal
Countersunk Head with Dome, Metallic
Material, with or without Surface Treatment Dimensions ISO 3230: 1998; (S)
1994 Bolts, Normal Bihexagonal Head,
Normal Shank, Short or Medium Length MJ
Threads, Metallic Material, Coated or
Uncoated, Strength Classes Less Than or
Equal to 1100 MPa - Dimensions (ISO 3185:
1993) (S)
1994 Bolts, Normal Bihexagonal Head,
Normal or Pitch Diameter Shank, Long
Length MJ Threads, Metallic Material,
Coated or Uncoated, Strength Classes Less
Than or Equal to 1100 MPa - Dimensions
(ISO 3203: 1993) (S)
1994 Bolts, Normal Spline Head, Normal or
Pitch Diameter Shank, Long Length MJ
Threads, Metallic Material, Coated or
Uncoated, Strength Classes Less Than or
Equal to 1100 MPa - Dimensions (ISO 9254:
1993) (S)
1994 Bolts, Normal Spline Head, Normal
Shank, Short or Medium Length MJ Threads,
Metallic Material, Coated or Uncoated,
Strength Classes Less Than or Equal to 1100
MPa - Dimensions (ISO 9255: 1993) (S)
1994 Bolts, Large Hexagonal Head, Normal
or Pitch Diameter Shank, Long Length MJ
Threads, Metallic Material, Coated or
Uncoated, Strength Classes Less Than or
Equal to 1100 MPa - Dimensions (ISO 9256:
1993) (S)
1995 Bolts, Large Bihexagonal Head,
Normal Shank, Short or Medium Length MJ
Threads, Metallic Material, Coated or
Uncoated, Strength Classes 1250 MPa to
1800 MPa - Dimensions (ISO 3186: 1994)
A 311
A 312
A 313
A 314
A 315
A 316
A 317
(S)
1997 Aerospace - Screws, 100 Degrees
Reduced Countersunk Head, Internal Offset
Cruciform Ribbed or Unribbed Drive,
Normal Shank, Short or Medium Length MJ
Threads, Metallic Material, Coated or
Uncoated, Strength Classes Less Than or
Equal to 1100 MPa - Di
1997 Aerospace - Screws, Pan Head, Internal
Offset Cruciform Ribbed or Unribbed Drive,
Stepped Shank, Short or Medium Length MJ
Threads, Metallic Material, Coated or
Uncoated, Strength Classes Less Than or
Equal to 1100 MPa - Dimensions (S); ISO
12260: 19
1997 Aerospace - Screws, Pan Head, Internal
Offset Cruciform Ribbed or Unribbed Drive,
Pitch Diameter Shank, Long Length MJ
Threads, Metallic Material, Coated or
Uncoated, Strength Classes Less Than or
Equal to 1100 MPa - Dimensions (S); ISO
12261: 1996
1997 Aerospace-Nuts, Hex, Plain, Reduced
Height, Normal Across Flats, with MJ
Threads, Class: 450 MPa(at Amb Temp)/120
Deg C, 450 MPa(at Amb Temp)/235 Deg C,
600 MPa(at Amb Temp)/425 Deg C, 900
MPa (at Amb Temp)/235 Deg C, 900 MPa
(at Amb Temp)/315 Deg C,
1997 Aerospace-Nuts, Hex, Slotted
(Castellated), Reduced Height, Normal
Across Flats, with MJ Threads, Class:450
MPa(at Amb Temp)/120 Deg C,450MPa(at
Amb Temp)/235 Deg C,600MPa(at Amb
Temp)/425 Deg C,900MPa(at Amb
Temp)/235 Deg C,900MPa(at Amb
Temp)/315 D
1997 Aerospace-Nuts, Hexagonal, Slotted
(Castellated), Normal Hgt, Normal Across
Flats, with MJ Threads, Class: 600MPa(at
Amb Temp)/120 Deg C,600MPa(at Amb
Temp)/235 Deg C,900MPa(at Amb
Temp)/425 Deg C,1100MPa(at Amb
Temp)/235 Deg C,1100MPa(at Amb
Temp)/3
1997 Aerospace - Nuts, Hexagonal, Plain,
A 328-1
A 328-2
A 332
A 318
A 319
A 320
A 321
A 322
Normal Height, Normal Across Flats, with
MJ Threads, Classifications: 600MPa(at Amb
Temp)/120 Deg C,600MPa(at Amb
Temp)/235 Deg C,900MPa(at Amb
Temp)/425 Deg C,1100MPa(at Amb
Temp)/235 Deg C,1100MPa(at Amb
Temp)/31
1999 Accessory Drives and Mounting
Flanges (Metric Sizes) - Part 1: Design
Criteria ISO 8399-1: 1998; (S)
1999 Accessory Drives and Mounting
Flanges (Metric Sizes) - Part 2: Dimensions
ISO 8399-2: 1998; (S)
1999 Aerospace - Bolts, with MJ Threads, in
Titanium Alloys, Strength Class 1 100 MPa Procurement Specification ISO 9152: 1998;
(S)
1997 Aerospace - Nuts, Hexagonal, Slotted
(Castellated), Reduced Height, Reduced
Across Flats, with MJ Threads,
Classifications: 450 MPa (at Amb Temp)/425
Deg C, 600 MPa (at Amb Temp)/235 Deg C,
600 MPa (at Amb Temp)/315 Deg C, 600
MPa (at Amb Temp)/650 D
1997 Aerospace - Nuts, Hexagonal, Plain,
Reduced Height, Reduced Across Flats, with
MJ Threads, Classifications: 450 MPa (at
Ambient Temp)/425 Deg C, 600 MPa (at
Ambient Temp)/235 Deg C, 600 MPa (at
Ambient Temp)/315 Deg C, 600 MPa (at
Ambient Temp)/650 D
1997 Aerospace - Nuts, Anchor, SelfLocking, Floating, Self-Aligning, Two Lug,
with MJ Threads, Classifications: 900 MPa
(at Ambient Temperature)/235 Degrees C,
900 MPa (at Ambient Temperature)/315
Degrees C, 900 MPa (at Ambient
Temperature)/425 Degrees C
1997 Aerospace - Nuts, Anchor, SelfLocking, Floating, Self-Aligning, Single Lug,
with MJ Threads, Classifications: 900 MPa
(at Ambient Temperature)/235 Degrees C,
900 MPa (at Ambient Temperature)/315
Degrees C, 900 MPa (at Ambient
Temperature)/425 Degree
1998 Aerospace - Screws, Pan Head, Internal
A 324
A 327
A 329
A 330
A 331
A 333
Offset Cruciform Ribbed or Unribbed Drive,
Threaded to Head, Metallic Material, Coated
or Uncoated, Strength Classes Less Than or
Equal to 1 100 MPa - Dimensions ISO 3202:
1997; (S)
1998 Aerospace - Nuts, Bihexagonal, SelfLocking, MJ Threads, Classifications: 1 100
MPa (at Ambient Temp)/425 Deg. C, 1 100
MPa (at Ambient Temp)/650 Deg. C 1 210
MPa (at Ambient Temp)/425 Deg. C 1 210
MPa (at Ambient Temp)/730 Deg. C 1 550
MPa (at Ambie
1998 Nuts, Bihexagonal, Self-Locking, with
Counterbore and MJ Threads, Cl.: 1 100 MPa
(at Ambient Temp.)/425 Degrees C, 1 100
MPa (at Ambient Temp.)/650 Degrees C, 1
210 MPa (at Ambient Temp.)/425 Degrees C,
1 210 MPa (at Ambient Temp.)/730 Degrees
C, 1 5
1999 Nuts, Anchor, Self-Locking, Fixed,
Single Lug, with Counterbore, with MJ
Threads, Classifications: 1 100 MPa (at
Ambient Temperature)/235 Degrees Celsius,
1 100 MPa (at Ambient Temperature)/315
Degrees Celsius and 1 100 MPa (at Ambient
Temperature)/4
1999 Nuts, Anchor, Self-Locking, Floating,
Two Lug, with Incremental Counterbore,
with MJ Threads, Classifications: 900MPa
(at Ambient Temperature)/235 Degrees
Celsius, 900 MPa (at Ambient
Temperature)/315 Degrees Celsius and 900
MPa (at Ambient Temperatu
1998 Bolts, Reduced Bihexagonal Head,
Normal or Pitch Diameter Shank, Long
Length MJ Threads, Metallic Material,
Coated or Uncoated, Strength Classes Less
Than or Equal to 1 275 MPa - Dimensions
ISO 12258: 1998; (S)
1999 Nuts, Anchor, Self-Locking, Floating,
Two Lug, with Counterbore, with MJ
Threads, Classifications: 1 100 MPa (at
Ambient Temperature) / 235 Degrees
Celsius, 1 100 MPa (at Ambient
Temperature) / 315 Degrees Celsius and 1
100 MPa (at Ambient Temperatur
A 334
A 341
A 342
A 343
A 351
A 352
A 335
A 336
A 337
A 338
1999 Nuts, Anchor, Self-Locking, Fixed, 90
Degree Corner, with Counterbore, with MJ
Threads, Classifications: 1 100 MPa (at
Ambient Temperature) / 235 Degrees
Celsius, 1 100 MPa (at Ambient
Temperature) / 315 Degrees Celsius and 1
100 MPa (at Ambient Temp
1999 Rivets, Solid - Materials ISO/TR
12198: 1998; (S)
1999 Nuts, Plain or Slotted (Castellated) Procurement Specification ISO 9139: 1998;
(S)
1999 Nuts, Plain or Slotted (Castellated) Test Methods ISO 9140: 1998; (S)
2000 Rivets, Solid, in Nickel Alloy Procurement Specification ISO 12288: 2000;
(S)
2000 Rivets, Solid, in Titanium or Titanium
Alloy - Procurement Specification ISO
12290: 2000; (S)
1999 Nuts, Anchor, Self-Locking, Fixed,
Closed Corner, Reduced Series, with
Counterbore, with MJ Threads,
Classifications: 1 100 MPa (at Ambient
Temperature) / 235 Degrees Celsius, 1 100
MPa (at Ambient Temperature) / 315
Degrees Celsius and 1 100 MPa (at
1999 Nuts, Anchor, Self-Locking, Fixed,
Two Lug, with Counterbore, with MJ
Threads, Classifications: 1 100 MPa (at
Ambient Temperature) / 235 Degrees
Celsius, 1 100 MPa (at Ambient
Temperature) / 315 Degrees Celsius and 1
100 MPa (at Ambient Temperature)
1999 Nuts, Anchor, Self-Locking, Floating,
Single Lug, with Counterbore, with MJ
Threads, Classifications: 1 100 MPa (at
Ambient Temperature) / 235 Degrees
Celsius, 1 100 MPa (at Ambient
Temperature) / 315 Degrees Celsius and 1
100 MPa (at Ambient Tempera
1999 Nuts, Anchor, Self-Locking, Fixed,
Two Lug, Reduced Series, with Counterbore,
with MJ Threads, Classifications: 1 100 MPa
(at Ambient Temperature) / 235 Degrees
Celsius, 1 100 MPa (at Ambient
A 339
A 340
A 344
A 345
A 353
A 354
A 355
A 356
A 357
Temperature) / 315 Degrees Celsius and 1
100 MPa (at Ambie
1999 Nuts, Anchor, Self-Locking, Floating,
Two Lug, Reduced Series, with Counterbore,
with MJ Threads, Classifications: 1 100 MPa
(at Ambient Temperature) / 235 Degrees
Celsius, 1 100 MPa (at Ambient
Temperature) / 315 Degrees Celsius and 1
100 MPa (at Am
1999 Nuts, Anchor, Self-Locking, Fixed, 90
Degree Corner, Reduced Series, with
Counterbore, with MJ Threads,
Classifications: 1 100 MPa (at Ambient
Temperature) / 235 Degrees Celsius, 1 100
MPa (at Ambient Temperature) / 315
Degrees Celsius and 1 100 MPa
1999 Nuts, Anchor, Self-Locking, Fixed,
Single Lug, Reduced Series, with
Counterbore, with MJ Threads,
Classifications: 1 100 MPa (at Ambient
Temperature) / 235 Degrees Celsius, 1 100
MPa (at Ambient Temperature) / 315
Degrees Celsius, 1 100 MPa (at Ambie
1999 Nuts, Hexagonal, Self-Locking, with
Counterbore and Captive Washer, with MJ
Threads, Classifications: 1 100 MPa (at
Ambient Temperature)/235 Degrees Celsius,
1 100 MPa (at Ambient Temperature)/315
Degrees Celsius, 1 100 MPa (at Ambient
Temperature)/4
2000 Inserts, with Self-Locking Floating Nut,
with MJ Threads, in Metallic Material,
Coated or Uncoated - Dimensions ISO
13595: 2000; (S)
2000 Inserts, with Self-Locking, with MJ
Threads, Closed Type, in Metallic Material,
Coated or Uncoated - Dimensions ISO
13596: 2000; (S)
2000 Inserts, Self-Locking, with MJ Threads,
Open Type, in Metallic Material, Coated or
Uncoated - Dimensions ISO 13597: 2000; (S)
2000 Inserts, Self-Locking, with MJ Threads,
Reduced Flanges, Closed Type, in Metallic
Material, Coated or Uncoated - Dimensions
ISO 13598: 2000; (S)
2000 Inserts, with Clearance Hole, in
A 358-1
A 358-2
A 358-3
A 360
A 361
A 359
A 363
A 364
A 55-A 56
B 100
B 23
B 24
B 25
B 25
Metallic Material, Coated or Uncoated Dimensions ISO 13599: 2000; (S)
2000 MJ Threads - Part 1: General
Requirements Supersedes BS 6293-1:1994;
ISO 5855-1:1999; (S)
2000 MJ Threads - Part 2: Limit Dimensions
for Bolts and Nuts Supersedes BS 62932:1994; ISO 5855-2:1999; (S)
2000 MJ Threads - Part 3: Limit Dimensions
for Fittings for Fluid Systems Supersedes BS
6293-3:1994; ISO 5855-3:1999; (S)
2000 Retainers, Spring, Sheet Metal, for SelfLocking Barrel Nuts - Dimensions ISO
12280:1999; (S)
2000 Rivets, Solid, 100 Degree Normal
Countersunk Head, in Metallic Material, with
or without Surface Treatment - Dimensions
ISO 12281:1999; (S)
2000 Nuts, Barrel, Self-Locking, Floating,
with MJ Threads, Classifications: 900 MPa
(at Ambient Temperature)/235 Degrees C,
1100 MPa (at Ambient Temperature)/235
Degrees C, 1250 MPa (at Ambient
Temperature)/235 Degrees C, 1550 MPa (at
Ambient Temperature
2000 Bolts, with MJ Threads, Made of HeatResistant Nickel-Based Alloy, Strength Class
1 550 MPa - Procurement Specification ISO
9154: 2000; (S)
2000 Rivets, Solid - Test Method ISO 17057:
1999; (S)
(OBSOLESCENT) 1951 Grub Screws for
Aeronautical Purposes
1992 Inspection, Testing and Acceptance of
Wrought Copper Alloys
1991 Copper-Aluminium- Nickel-Iron Alloy
Rods, Sections, Forging Stock and Forgings
1991 Copper-Tin-Phosphorous Alloy Rods
and Sections
1991 Copper-Nickel-Silicon Alloy Rods,
Sections, Forging Stock and Forgings (Heat
Treated)
1991 Amd 1 Copper-Nickel-Silicon Alloy
Rods, Sections, Forging Stock and Forgings
(Heat Treated) (AMD 7647) April 15, 1993
(S)
B 26
B 27
B 28
B 28
B 28
B 29
B 29
B 29
B 30
B 30
B 30
B 31
B 31
B 31
1991 Copper-Nickel-Silicon Alloy Rods and
Sections (Cold Worked and Heat Treated)
1991 Copper-Zinc-Aluminium- NickelSilicon Alloy Tube
1991 Copper-Beryllium Alloy Strip, Foil and
Parts (Solution Treated (W) and Precipitated)
1991 Amd 1 Copper-Beryllium Alloy Strip,
Foil and Parts (Solution Treated (W) and
Precipitated) (AMD 7115) April 1, 1992
1991 Amd 2 Copper-Beryllium Alloy Strip,
Foil and Parts (Solution Treated (W) and
Precipitated) (AMD 8940) December 15,
1995 (S)
1991 Copper-Beryllium Alloy Strip, Foil and
Parts (Solution Treated, Cold Rolled: Quarter
Hard (W(1/4H)) and Precipitated) (S)
1991 Amd 1 Copper-Beryllium Alloy Strip,
Foil and Parts (Solution Treated, Cold
Rolled: Quarter Hard (W(1/4H)) and
Precipitated) (AMD 7116) April 1, 1992
1991 Amd 2 Copper-Beryllium Alloy Strip,
Foil and Parts (Solution Treated, Cold
Rolled: Quarter Hard (W(1/4H)) and
Precipitated) (AMD 8941) December 15,
1995 (S)
1991 Copper-Beryllium Alloy Strip, Foil and
Parts (Solution Treated, Cold Rolled: Half
Hard (W(1/2H)) and Precipitated)
1991 Amd 1 Copper-Beryllium Alloy Strip,
Foil and Parts (Solution Treated, Cold
Rolled: Half Hard (W(1/2H)) and
Precipitated) (AMD 7117) April 1, 1992
1991 Amd 2 Copper-Beryllium Alloy Strip,
Foil and Parts (Solution Treated, Cold
Rolled: Half Hard (W(1/2H)) and
Precipitated) (AMD 8942) December 15,
1995 (S)
1991 Copper-Beryllium Alloy Strip, Foil and
Parts (Solution Treated, Cold Rolled: Full
Hard (W(H)) and Precipitated)
1991 Amd 1 Copper-Beryllium Alloy Strip,
Foil and Parts (Solution Treated, Cold
Rolled: Full Hard (W(H)) and Precipitated)
(AMD 7118) April 1, 1992
1991 Amd 2 Copper-Beryllium Alloy Strip,
Foil and Parts (Solution Treated, Cold
B 32
B 32
B 32
B 33
B 33
B 33
BS 0-1
BS 0-2
BS 0-2
BS 0-3
BS 0-3
BS 0 PART 1
BS 0 PART 1
BS 0 PART 1
Rolled: Full Hard (W(H)) and Precipitated)
(AMD 8943) December 15, 1995 (S)
1991 Copper-Beryllium Alloy Rods, Sections
and Parts (Solution Treated (W) and
Precipitated)
1991 Amd 1 Copper-Beryllium Alloy Rods,
Sections and Parts (Solution Treated (W) and
Precipitated) (AMD 7119) April 1, 1992
1991 Amd 2 Copper-Beryllium Alloy Rods,
Sections and Parts (Solution Treated (W) and
Precipitated) (AMD 8944) December 15,
1995 (S)
1991 Copper-Beryllium Alloy Wire and
Springs (Solution Treated (W) and
Precipitated)
1991 Amd 1 Copper-Beryllium Alloy Wire
and Springs (Solution Treated (W) and
Precipitated) (AMD 7120) April 1, 1992
1991 Amd 2 Copper-Beryllium Alloy Wire
and Springs (Solution Treated (W) and
Precipitated) (AMD 8945) December 15,
1995 (S)
1997 Amd 1 Standard for Standards - Part 1:
Guide to the Context, Aims and General
Principles AMD 13505:February 28,2002;
(G)
1997 Standard for Standards - Part 2:
Recommendations for Committee Procedures
(G)
1997 Amd 1 Standard for Standards - Part 2:
Recommendations for Committee Procedures
AMD 13506: February 28, 2002; (G)
1997 Standard for Standards - Part 3:
Specification for Structure, Drafting and
Presentation (G)
1997 Amd 1 Standard for Standards - Part 3:
Specification for Structure, Drafting and
Presentation AMD 13507: February 28,
2002; (G)
1991 Standard for Standards Part 1: Guide to
General Principles of Standardization (G)
1991 Amd 1 Standard for Standards Part 1:
Guide to General Principles of
Standardization AMD 8023; November 15,
1993; (G)
1981 Standard for Standards Part 1: General
BS 0 PART 2
BS 0 PART 2
BS 0 PART 2
BS 0 PART 3
BS 0 PART 3
BS 0 PART 3
BS 10
BS 1000 (3/31)
BS 1000 (37)
BS 1000 (5/50)
BS 1000 (52)
BS 1000 (53)
BS 1000 (55)
BS 1000 (56)
BS 1000 (57)
Principles of Standardization (G)
1991 Standard for Standards Part 2: Guide to
BSI Committee Procedures (G)
1991 Amd 1 Standard for Standards Part 2:
Guide to BSI Committee Procedures AMD
8024; November 15, 1993; (G)
1981 Amd 2 Standard for Standards Part 2:
BSI and Its Committee Procedures (G)
1991 Standard for Standards Part 3: Guide to
Drafting and Presentation of British
Standards (G)
1991 Amd 1 Standard for Standards Part 3:
Guide to Drafting and Presentation of British
Standards AMD 8025; November 15, 1993;
(G)
1981 Amd 1 Standard for Standards Part 3:
Drafting and Presentation of British
Standards (G)
(OBSOLESCENT) 1962 Amd 4 Flanges and
Bolting Pipes, Valves and Fittings (Q)
(OBSOLETE) 1985 Universal Decimal
Classification (UDC). English Full Edition
(3/31): Social Sciences in General.
Demography. Sociology. Statistics (G)
(OBSOLETE) 1975 Universal Decimal
Classification (UDC). English Full Edition
(37): Education. Teaching. Training. Leisure
(G)
(OBSOLETE) 1983 Universal Decimal
Classification (UDC). English Full Edition
(5/50): Exact Sciences in General. Nature
Study. Environmental Sciences (G)
1977 Universal Decimal Classification
(UDC). English Full Edition (52):
Astronomy. Astrophysics. Space Research.
Geodesy
1974 Amd 1 Universal Decimal
Classification (UDC). English Full Edition
(53): Physics
1982 Universal Decimal Classification
(UDC). English Full Edition (55): Earth
Sciences. Geology. Geophysics
1981 Universal Decimal Classification
(UDC). English Full Edition (56):
Palaeontology
1979 Universal Decimal Classification
BS 1000 (58)
BS 1000 (613)
BS 1000 (614)
BS 1000 (615)
BS 1000 (62/62.9)
BS 1000 (620)
BS 1000 (621.3)
BS 1000 (621.4)
BS 1000 (621.8)
BS 1000 (621.8)
BS 1000 (621.9)
BS 1000 (621/621.0)
(UDC). English Full Edition (57): Biological
Sciences in General. Virology. Microbiology
1979 Universal Decimal Classification
(UDC). English Full Edition (58): Botany
1980 Universal Decimal Classification
(UDC). English Full Edition (613): Hygiene
Generally. Personal Health and Hygiene
1990 Universal Decimal Classification
(UDC). English Full Edition (614): Public
Health and Hygiene. Accident Prevention
1979 Universal Decimal Classification
(UDC). English Full Edition (615):
Pharmaceutics. Therapeutics. Toxicology
1986 Universal Decimal Classification
(UDC). English Full Edition (62/62.9):
Engineering, Technology in General.
Characteristics and Details of Machines,
Equipment, Processes and Products
1990 Universal Decimal Classification
(UDC). English Full Edition (620): Materials
Testing. Commercial Materials. Power
Stations. Economics of Energy
1989 Universal Decimal Classification
(UDC). English Full Edition (621.3):
Electrical Engineering
1976 Universal Decimal Classification
(UDC). English Full Edition (621.4): Heat
Engines (Other Than Steam Engines)
1995 Universal Decimal Classification
English Full Edition UDC 621.8 Machine
Elements. Motive Power Engineering.
Materials Handling. Fixings. Lubrication (G)
1976 Amd 1 Universal Decimal
Classification (UDC). English Full Edition
(621.8): Mechanical Power Transmission.
Machine Elements. Gearing. Materials
Handling. Mechanical Attachments, Fixing,
Fasteners. Lubrication
1976 Universal Decimal Classification
(UDC). English Full Edition (621.9):
Working, Machining with Chip Formation.
Cutting, Grinding, Sheet Working, Etc.
1973 Universal Decimal Classification
(UDC). English Full Edition (621/621.0):
Mechanical Engineering in General. Nuclear
Technology
BS 1000 (622)
BS 1000 (623)
BS 1000 (624)
BS 1000 (625)
BS 1000 (626/627)
BS 1000 (628)
BS 1000 (633/635)
BS 1000 (64)
BS 1000(65/ 651+657/659)
BS 1000 (654)
BS 1000 (63/632)
BS 1000 (636/639)
BS 1000 (655)
BS 1000 (656)
1979 Universal Decimal Classification
(UDC). English Full Edition (622): Mining
1974 Amd 1 Universal Decimal
Classification (UDC). English Full Edition
(623): Military Engineering
1981 Universal Decimal Classification
(UDC). English Full Edition (624): Civil and
Structural Engineering in General
1976 Universal Decimal Classification
(UDC). English Full Edition (625): Civil
Engineering of Land Transport. Railway
Engineering. Highway Engineering
1977 Universal Decimal Classification
(UDC). English Full Edition (626/627):
Hydraulic (Water) Construction Works
1982 Universal Decimal Classification
(UDC). English Full Edition (628): Public
Health Engineering. Water. Illuminating
Engineering
1985 Universal Decimal Classification
(UDC). English Full Edition (633/635):
Specific Crops. Horticulture
1984 Universal Decimal Classification
(UDC). English Full Edition (64): Home
Economics
1991 Universal Decimal Classification UDC
65/651+657/659 Management and
Organization of Industry and Commerce
1983 Universal Decimal Classification
(UDC). English Full Edition (654):
Telecommunications and Telecontrol:
(Organization, Services)
1981 Universal Decimal Classification
(UDC). English Full Edition (63/632):
Agriculture in General. Forestry. Plant
Injuries, Diseases and Pests. Plant Protection
(OBSOLETE) 1981 Universal Decimal
Classification (UDC). English Full Edition
(636/639): Animal Breeding. Animal
Produce. Hunting. Fishing (G)
1986 Universal Decimal Classification
(UDC). English Full Edition (655): Graphic
Industries. Printing. Publishing. Book Trade
1982 Universal Decimal Classification
(UDC). English Full Edition (656): Transport
and Postal Services. Traffic Organization and
BS 1000 (662)
BS 1000 (663)
BS 1000 (664)
BS 1000 (665)
BS 1000 (666)
BS 1000 (667)
BS 1000 (669)
BS 1000 (675)
BS 1000 (676)
BS 1000 (677)
BS 1000 (678)
BS 1000 (679)
BS 1000 (681.5)
Control
1983 Universal Decimal Classification
(UDC). English Full Edition (662):
Explosives. Fuels
1985 Universal Decimal Classification
(UDC). English Full Edition (663): Industrial
Microbiology. Industrial Mycology.
Fermentation Industry. Beverage Industry.
Stimulant Industry
1985 Universal Decimal Classification
(UDC). English Full Edition (664):
Preparation and Preservation of Solid
Foodstuffs
1979 Universal Decimal Classification
(UDC). English Full Edition (665): Oils.
Fats. Waxes. Adhesives. Gums. Resins
1984 Universal Decimal Classification
(UDC). English Full Edition (666): Glass
Industry. Ceramics. Cement and Concrete
1979 Universal Decimal Classification
(UDC). English Full Edition (667): Colour
Industries (Dyes, Inks, Paints Etc.)
1986 Universal Decimal Classification
(UDC). English Full Edition (669):
Metallurgy
1983 Universal Decimal Classification
(UDC). English Full Edition (675): Leather
Industry
1984 Universal Decimal Classification
(UDC). English Full Edition (676): Paper
Industry
1981 Amd 1 Universal Decimal
Classification (UDC). English Full Edition
(677): Textile Industry
1981 Universal Decimal Classification
(UDC). English Full Edition (678): Industries
Based on Macromolecular Materials.
Rubbers. Plastics
1983 Universal Decimal Classification
(UDC). English Full Edition (679): Industries
Based on Various Processable Materials.
Cable and Cordage Industries. Stone
Industries
1976 Amd 2 Universal Decimal
Classification (UDC). English Full Edition
(681.5): Automatic Control Engineering
BS 1000 (681.6)
BS 1000 (681.7)
BS 1000 (684)
BS 1000 (687)
BS 1000 (688/689)
BS 1000 (69)
BS 1000 (71)
BS 1000 (72)
BS 1000 (73/76)
BS 1000 (77)
BS 1000 (8)
BS 1000 (8)
BS 1000:AUX: 1(E): PT 1
BS 1000:AUX 1E (41/435)
1989 Universal Decimal Classification
(UDC). English Full Edition (681.6): Graphic
Reproduction Machines and Equipment
1975 Amd 2 Universal Decimal
Classification (UDC). English Full Edition
(681.7): Optical Apparatus and Instruments
1979 Universal Decimal Classification
(UDC). English Full Edition (684): Furniture
and Allied Industries
1984 Universal Decimal Classification
(UDC). English Full Edition (687): Clothing
Industry. Beauty Culture Industries
(OBSOLETE) 1980 Universal Decimal
Classification (UDC). English Full Edition
(688/689): Fancy Goods. Toys. Hobbies (G)
1981 Universal Decimal Classification
(UDC). English Full Edition (69): Building
1976 Universal Decimal Classification
(UDC). English Full Edition (71): Physical
Planning
1975 Universal Decimal Classification
(UDC). English Full Edition (72):
Architecture
1977 Universal Decimal Classification
(UDC). English Full Edition (73/76): Various
Arts and Crafts
1986 Universal Decimal Classification
(UDC). English Full Edition (77):
Photography and Similar Processes
1993 Universal Decimal Classification
English Full Edition UDC 8 Language.
Linguistics. Literature
1971 Universal Decimal Classification
(UDC). English Full Edition (8): Language.
Linguistics. Literature
1980 Universal Decimal Classification
(UDC). English Full Edition Auxiliaries
1(E): Part 1: Common Auxiliaries of Place
(1/2) Superseded by BS 1000:AUX 1e
(41/435):1999; (G)
1999 Universal Decimal Classification Auxiliary Table 1e (41/435), Common
Auxiliaries of Place for United Kingdom and
Germany Extended Edition Supersedes BS
1000:Auxiliaries 1(e): Part 1, Part 2, and Part
3; (G)
BS 1000:AUX 1E (71+73)
BS 1000M PART 1
BS 1000M PART 1
BS 1000M PART 2
BS 1000M PART 2
BS 1000M SUPP NO. 3
BS 1010 PART 2
BS 1016-102
BS 1016 PART 1
2001 Universal Decimal Classification Auxiliary Table 1e (71+73) - Common
Auxiliaries of Place for Canada and the
United States of America, Extended Edition
Replaces BS 1000 Aux I(e)-3: 1993; (G)
1993 Universal Decimal Classification
International Medium Edition English Text,
Edition 2 Part 1: Systematic Tables Images
for This Document is Not Available Through
This Product. Please Contact the Technical
Indexes' Ext. 99 Helpline in the UK, or, for
1985 Amd 2 International Medium Edition
Part 1: Systematic Tables AMD 6306;
December 21, 1990; Images for This
Document is Not Available Through This
Product. Please Contact the Technical
Indexes' Ext. 99 Helpline in the UK, or, for
International Enquirie
1993 Universal Decimal Classification
International Medium Edition English Text,
Edition 2 Part 2: Alphabetical Subject Index
Images for This Document is Not Available
Through This Product. Please Contact the
Technical Indexes' Ext. 99 Helpline in the
UK,
1988 Universal Decimal Classification
International Medium Edition Part 2:
Alphabetical Subject Index Images for This
Document is Not Available Through This
Product. Please Contact the Technical
Indexes' Ext. 99 Helpline in the UK, or, for
International E
1997 Universal Decimal Classification
International Medium Edition English Text,
Edition 2 Supplement No. 3 Cumulating
Supplements Nos. 1 and 2 Supersedes
Supplement No. 2: 1996; Images for This
Document is Not Available Through This
Product. Please Conta
1973 Amd 4 Draw-Off Taps and Stopvalves
for Water Services (Screwdown Pattern) Part
2: Draw-Off Taps and Ground Stopvalves
2000 Methods for Analysis and Testing of
Coal and Coke - Part 102: Determination of
Total Moisture of Coke ISO 579: 1999; (W)
1973 Methods for the Analysis and Testing
BS 1016 PART 10
BS 1016 PART 100
BS 1016-104.1
BS 1016 PART 105
BS 1016 PART 109
BS 1016 PART 111
BS 1016 PART 111
BS 1016 PART 112
BS 1016 PART 113
BS 1016 PART 14
BS 1016 PART 21
BS 1016 PART 6
BS 1016 PART 6
of Coal and Coke Part 1: Total Moisture of
Coal
1977 Methods for the Analysis and Testing
of Coal and Coke Part 10: Arsenic in Coal
and Coke
1994 Methods for Analysis and Testing of
Coal and Coke Part 100: General
Introduction and Methods for Reporting
Results
1999 Methods for Analysis and Testing of
Coal and Coke - Part 104: Proximate
Analysis - Section 104.1: Determination of
Moisture Content of the General Analysis
Test Sample ISO 11722: 1999; (W)
1992 Methods for Analysis and Testing of
Coal and Coke Part 105: Determination of
Gross Calorific Value
1995 Methods for Analysis and Testing of
Coal and Coke Part 109: Size Analysis of
Coal ISO 1953: 1994; (W)
1990 Methods for the Analysis and Testing
of Coal and Coke Part 111: Determination of
Abrasion Index of Coal
1993 Methods for Analysis and Testing of
Coal and Coke Part 111: Determination of
Abrasion Index of Coal
1995 Methods for Analysis and Testing of
Coal and Coke Part 112: Determination of
Hardgrove Grindability Index of Hard Coal
ISO 5074: 1994; (W)
1995 Methods for Analysis and Testing of
Coal and Coke Part 113: Determination of
Ash Fusibility ISO 540: 1995; (W)
1963 Methods for the Analysis and Testing
of Coal and Coke Part 14: Analysis of Coal
Ash and Coke Ash
1981 Methods for the Analysis and Testing
of Coal and Coke Part 21: Determination of
Moisture-Holding Capacity of Hard Coal
1977 Methods for Analysis and Testing of
Coal and Coke Part 6: Ultimate Analysis of
Coal Partially Replaced by BS 1016:
Subsection 106.4.1: 1993
1977 Amd 1 Methods for Analysis and
Testing of Coal and Coke Part 6: Ultimate
Analysis of Coal AMD 6982; May 1, 1992;
BS 1016 PART 6
BS 1016 PART 7
BS 1016 PART 7
BS 1016 PART 7
BS 1016 PART 8
BS 1016 PART 8
BS 1016 PART 9
BS 1016 SEC 107.1
BS 1016 SEC 108.1
BS 1016PT 106: SEC 106.7
Partially Replaced by BS 1016: Subsection
106.4.1: 1993; (W)
1977 Amd 2 Methods for Analysis and
Testing of Coal and Coke Part 6: Ultimate
Analysis of Coal AMD 7689; May 15, 1993;
Partially Replaced by BS 1016: Subsection
106.4.1: 1993; (W)
1977 Methods for Analysis and Testing of
Coal and Coke Part 7: Ultimate Analysis of
Coke Partially Replaced by BS 1016:
Subsection 106.4.1: 1993
1977 Amd 1 Methods for Analysis and
Testing of Coal and Coke Part 7: Ultimate
Analysis of Coke AMD 6983; May 1, 1992;
Partially Replaced by BS 1016: Subsection
106.4.1: 1993; (W)
1977 Amd 2 Methods for Analysis and
Testing of Coal and Coke Part 7: Ultimate
Analysis of Coke AMD 7690; May 15, 1993;
Partially Replaced by BS 1016: Subsection
106.4.1: 1993; (W)
1977 Amd 1 Methods for Analysis and
Testing of Coal and Coke Part 8: Chlorine in
Coal and Coke AMD 3472; December 31,
1980; Superseded by BS 1016: Subsection
106.6.1: 1997 and BS 1016: Subsection
106.6.2; (W)
1977 Amd 2 Methods for Analysis and
Testing of Coal and Coke Part 8: Chlorine in
Coal and Coke AMD 6984; May 1, 1992;
Superseded by BS 1016: Subsection 106.6.1:
1997 and BS 1016: Subsection 106.6.2; (W)
1977 Methods for the Analysis and Testing
of Coal and Coke Part 9: Phosphorus in Coal
and Coke
1991 Analysis and Testing of Coal and Coke
Part 107: Caking and Swelling Properties of
Coal Section 107.1: Determination of
Crucible Swelling Number
1992 Methods for Analysis and Testing of
Coal and Coke Part 108: Tests Special to
Coke Section 108.1: Determination of Shatter
Indices
1997 Methods for Analysis and Testing of
Coal and Coke Part 106: Ultimate Analysis
of Coal and Coke Section 106.7:
BS 1016 SEC 104.2
BS 1016 SEC 106.2
BS 1016 SEC 106.5
BS 1016 SEC 107.2
BS 1016 SEC 107.3
BS 1016 SEC 108.1
BS 1016 SEC 108.2
BS 1016 SEC 108.3
BS 1016 SEC 108.3
BS 1016 SEC 108.4
Determination of Carbonate Carbon Content
Supersedes Clauses 5 and 9 and Those Parts
of Clause 11 Relating to Carbon (Carbonate)
as Carbon D
1991 Analysis and Testing of Coal and Coke
Part 104: Proximate Analysis Section 104.2:
Determination of Moisture Content of the
General Analysis Sample of Coke
1997 Methods for Analysis and Testing of
Coal and Coke Part 106: Ultimate Analysis
of Coal and Coke Section 106.2:
Determination of Nitrogen Content ISO 333:
1996 (W)
1996 Methods for Analysis and Testing of
Coal and Coke Part 106: Ultimate Analysis
of Coal and Coke Section 106.5:
Determination of Forms of Sulfur in Coal
ISO 157: 1996; (W)
1991 Analysis and Testing of Coal and Coke
Part 107: Caking and Swelling Properties of
Coal Section 107.2: Assessment of Caking
Power by Gray-King Coke Test
1990 Methods for the Analysis and Testing
of Coal and Coke Part 107: Caking and
Swelling Properties of Coal Section 107.3:
Determination of Swelling Properties Using a
Dilatometer Partially Replaces BS 1016: PT
12: 1980
1996 Methods for Analysis and Testing of
Coal and Coke Part 108: Test Special to
Coke Section 108.1: Determination of Shatter
Indices ISO 616: 1995; (W)
1992 Methods for Analysis and Testing of
Coal and Coke Part 108: Tests Special to
Coke Section 108.2: Determination of
Micum and Irsid Indices
1995 Methods for Analysis and Testing of
Coal and Coke Part 108: Tests Special to
Coke Section 108.3: Determination of Bulk
Density (Small Container) ISO 567: 1995;
(W)
1991 Analysis and Testing of Coal and Coke
Part 108: Tests Special to Coke Section
108.3: Determination of Bulk Density (Small
Container)
1995 Methods for Analysis and Testing of
BS 1016 SEC 108.4
BS 1016 SEC 108.5
BS 1016 SEC 108.6
BS 1016 SEC 110.1
BS 1017 PART 2
BS 1017 PART 2
BS 1041 PART 3
BS 1041 PART 4
BS 1016 SEC 110.2
BS 1016 SUB SEC 106.1.1
BS 1016 SUB SEC 106.1.2
Coal and Coke Part 108: Tests Special to
Coke Section 108.4: Determination of Bulk
Density (Large Container) (ISO 1013: 1995)
(W)
1991 Analysis and Testing of Coal and Coke
Part 108: Tests Special to Coke Section
108.4: Determination of Bulk Density (Large
Container)
1992 Methods for Analysis and Testing of
Coal and Coke Part 108: Tests Special to
Coke Section 108.5: Determination of
Density and Porosity
1992 Methods for Analysis and Testing of
Coal and Coke Part 108: Tests Special to
Coke Section 108.6: Determination of
Critical Air Blast Value
1996 Methods for Analysis and Testing of
Coal and Coke Part 110: Size Analysis of
Coke Section 110.1: Nominal Top Size
Greater Than 20 mm (ISO 728: 1995) (W)
1994 Sampling of Coal and Coke Part 2:
Methods for Sampling of Coke (W)
Superseded by BS ISO 13909-1 to 8
1960 Amd 2 Methods for Sampling of Coal
and Coke Part 2: Sampling of Coke
1989 Temperature Measurement Part 3:
Guide to Selection and Use of Industrial
Resistance Thermometers
1992 Temperature Measurement Part 4:
Guide to the Selection and Use of
Thermocouples (Supersedes BS 1041: Part 4:
1966) (H)
1996 Methods for Analysis and Testing of
Coal and Coke Part 110: Size Analysis of
Coke Section 110.2: Nominal Top Size 20
mm or Less (ISO 2325: 1986) (W)
1996 Methods for Analysis and Testing of
Coal and Coke Part 106: Ultimate Analysis
of Coal and Coke Section 106.1:
Determination of Carbon and Hydrogen
Content Subsection 106.1.1: High
Temperature Combustion Method (ISO 609:
1996) (W)
1996 Methods for Analysis and Testing of
Coal and Coke Part 106: Ultimate Analysis
of Coal and Coke Section 106.1:
BS 1016 SUB SEC 106.4.1
BS 1016 SUB SEC 106.4.2
BS 1016 SUB SEC 106.6.1
BS 1041 PART 4
BS 1041 PART 5
BS 1041 PART 5
BS 1041 PART 7
BS 1041 SEC 2.1
BS 1041 SEC 2.2
BS 1042 SEC 1.1
Determination of Carbon and Hydrogen
Content Subsection 106.1.2: Liebig Method
(ISO 625: 1996) (W)
1993 Methods for Analysis and Testing of
Coal and Coke Part 106: Ultimate Analysis
of Coal and Coke Section 106.4:
Determination of Total Sulfur Content
Subsection 106.4.1: Eschka Method (W)
1996 Methods for Analysis and Testing of
Coal and Coke Part 106: Ultimate Analysis
of Coal and Coke Section 106.4:
Determination of Total Sulfur Content
Subsection 106.4.2: High Temperature
Combustion Method (ISO 351: 1996) (W)
1997 Methods for Analysis and Testing of
Coal and Coke Part 106: Ultimate Analysis
of Coal and Coke Section 106.6:
Determination of Chlorine Content
Subsection 106.6.1: Eschka Method Together
with BS 1016: Subsection 106.6.2 It Will
Supersede BS 1016: Par
1992 Amd 1 Temperature Measurement Part
4: Guide to the Selection and Use of
Thermocouples AMD 7408; December 15,
1992
1989 Temperature Measurement Part 5:
Guide to Selection and Use of Radiation
Pyrometers
1989 Amd 1 Temperature Measurement Part
5: Guide to Selection and Use of Radiation
Pyrometers (AMD 8238) November 15, 1994
(H)
1988 Temperature Measurement Part 7:
Guide to Selection and Use of
Temperature/Time Indicators
1985 Temperature Measurement Part 2:
Expansion Thermometers Section 2.1: Guide
to Selection and Use of Liquid in
Thermometers
1989 Temperature Measurement Part 2:
Expansion Thermometers Section 2.2: Guide
to Selection and Use of Dial-Type Expansion
Thermometers
1992 Measurement of Fluid Flow in Closed
Conduits Part 1: Pressure Differential
Devices Section 1.1: Specification for
BS 1042 SEC 1.1
BS 1042 SEC 1.3
BS 1042 SEC 2.1
BS 1044 PART 1
BS 1047
BS 1042 SEC 1.4
BS 1042 SEC 1.4
BS 1042 SEC 1.4
BS 1042 SEC 2.2
BS 1042 SEC 2.3
Square-Edged Orifice Plates, Nozzles, and
Venturi Tubes Inserted in Circular CrossSection Conduits Running Full ISO 5167-1:
1991; Renu
1992 Amd 1 Measurement of Fluid Flow by
Means of Pressure Differential Devices Part
1: Orifice Plates, Nozzles and Venturi Tubes
Inserted in Circular Cross-Section Conduits
Running Full AMD 9332; January 15, 1997;
Renumbered as BS EN ISO 5167-1: 1997;
(Q)
1991 Measurement of Fluid Flow in Closed
Conduits Part 1: Pressure Differential
Devices Section 1.3: Method of
Measurement of Gas Flow by Means of
Critical Flow Venturi Nozzles (ISO 9300:
1990) (Renumbered as BS EN ISO 9300:
1995)
1983 Methods of Measurement of Fluid Flow
in Closed Conduits Part 2: Pitot Tubes
Section 2.1: Method Using Pitot-Static Tubes
1964 Gauge Blanks Part 1: Plug, Ring and
Caliper Gauges
1983 Air-Cooled Blast Furnace Slag
Aggregate for Use in Construction
1992 Measurement of Fluid Flow in Closed
Conduits Part 1: Pressure Differential
Devices Section 1.4: Guide to the Use of
Devices Specified in Sections 1.1 and 1.2
1992 Amd 1 Measurement of Fluid Flow in
Closed Conduits Part 1: Pressure Differential
Devices Section 1.4: Guide to the Use of
Devices Specified in Sections 1.1 and 1.2
(AMD 8154) June 15, 1994 (G)
1984 Amd 1 Methods of Measurement of
Fluid Flow in Closed Conduits Part 1:
Pressure Differential Devices Section 1.4:
Guide to the Use of Devices Specified in
Sections 1.1 and 1.2 (AMD 5456) November
30, 1987
1983 Methods of Measurement of Fluid Flow
in Closed Conduits Part 2: Pitot Tubes
Section 2.2: Method of Measurement of
Velocity at One Point of a Conduit of
Circular Cross Section
1984 Methods of Measurement of Fluid Flow
BS 1042 SEC 2.4
BS 1050
BS 1075
BS 1075
BS 1075
BS 1075
BS 1075
BS 1075
BS 1075
BS 1075
BS 1075
BS 1098 PART 1
BS 1098 PART 2
BS 1101
BS 1102
BS 1103
BS 1105
in Closed Conduits Part 2: Pitot Tubes
Section 2.3: Methods of Flow Measurement
in Swirling or Asymmetric Flow Conditions
in Circular Ducts by Means of CurrentMeters or Pitot Static Tubes
1989 Methods of Measurement of Fluid Flow
in Closed Conduits Part 2: Pitot Tubes
Section 2.4: Method of Measurement of
Clean Water Flow Using Current Meters in
Full Conduits and Under Regular Flow
Conditions
1984 Indicator Lamps for Use in
Telecommunication Apparatus and for Allied
Purposes
1989 Tungsten Halogen Lamps (NonVehicle)
1989 Amd 8 Tungsten Halogen Lamps (NonVehicle) AMD 10814: July 2000; EN
60357:1988; (E)
1989 Amd 1 Tungsten Halogen Lamps (NonVehicle) AMD 6810; July 15, 1992
1989 Amd 2 Tungsten Halogen Lamps (Non
Vehicle) AMD 8103; July 15, 1994; (E)
1989 Amd 4 Tungsten Halogen Lamps (Non
Vehicle) AMD 8719; November 15, 1995;
(E)
1989 Amd 5 Tungsten Halogen Lamps (NonVehicle) AMD 9127; November 1996; (E)
1989 Amd 6 Tungsten Halogen Lamps (NonVehicle) AMD 9247; April 15, 1997; (E)
1989 Amd 7 Tungsten Halogen Lamps (NonVehicle) AMD 9774; January 1998; (E)
1989 Amd 9 Tungsten Halogen Lamps (NonVehicle) AMD 13025: September 20, 2001;
EN 60357:1988; (E)
1967 Amd 1 Jig Bushes Part 1: Inch Units
(Formerly BS 1098: 1967)
1977 Jig Bushes Part 2: Metric Units
1977 Amd 1 Pressure Containers for Paint
and Other Similar Substances
1991 Rubber Hose for Water Suction and
Discharge with Smooth Bore and Smooth or
Corrugated Exterior (E)
1989 Fabrics for the Reinforcement of
Rubber Hoses
(OBSOLESCENT) 1981 Wood Wool
BS 1113
BS 1113
BS 1113
BS 1113 ENQ CASE 11
BS 1113
BS 1113 E/C 10: ISSUE 2
BS 1113 ENQ CASE 1
BS 1113 ENQ CASE 10
BS 1113 ENQ CASE 12
BS 1113 ENQ CASE 13
Cement Slabs up to 125 mm Thick
1999 Design and Manufacture of Water-Tube
Steam Generating Plant (Including
Superheaters, Reheaters and Steel Tube
Economizers) (Q)
1999 Corr 2 Design and Manufacture of
Water-Tube Steam Generating Plant
(Including Superheaters, Reheaters and Steel
Tube Economizers) CORR 12026 October
2000; (Q)
1989 Amd 4 Design and Manufacture of
Water-Tube Steam Generating Plant
(Including Superheaters, Reheaters and Steel
Tube Economizers) AMD 6717; May 31,
1991; (Q)
1996 Combination of Calculation Pressure
and Design Temperature (Q)
1999 Corr 1 Design and Manufacture of
Water-Tube Steam Generating Plant
(Including Superheaters, Reheaters and Steel
Tube Economizers) CORR 10880 April
2000; to Be Superseded When All Parts of
EN 12952 Are Published; (Q)
1996 Design and Manufacture of Water-Tube
Steam Generating Plant (Including
Superheaters, Reheaters and Steel Tube
Economizers) Enquiry Case 10: Use of Steel
91 Tubing and Piping (Q)
1986 Design and Manufacture of Water-Tube
Steam Generating Plant (Including
Superheaters, Reheaters and Steel Tube
Economizers) Enquiry Case 1: Eddy Current
Testing in Lieu of Hydraulic Testing (Q)
1995 Design and Manufacture of Water-Tube
Steam Generating Plant (Including
Superheaters, Reheaters and Steel Tube
Economizers) Enquiry Case 10: Use of Steel
91 (Q)
1996 Design and Manufacture of Water-Tube
Steam Generating Plant (Including
Superheaters, Reheaters and Steel Tube
Economizers) Enquiry Case 12: Use of Steel
91 Forgings (Q)
2000 Guidance on the Use of BS 1113 to
Satisfy the Essential Safety Requirements of
the Pressure Equipment Directive (Q)
BS 1113 ENQ CASE 2
BS 1113 ENQ CASE 2
BS 1113 ENQ CASE 3
BS 1113 ENQ CASE 4
BS 1113 ENQ CASE 5
BS 1113 ENQ CASE 6
BS 1113 ENQ CASE 7
BS 1113 ENQ CASE 7
BS 1113 ENQ CASE 8
BS 1117 PART 1
1992 Enquiry Case 2: Use of ASTM A105,
A106, A182, A234, A335, and A312
Materials Issue 3; (Q)
1990 Design and Manufacture of Water-Tube
Steam Generating Plant (Including
Superheaters, Reheaters and Steel Tube
Economizers) Enquiry Case 2: Use of ASTM
A105, A106, A182, A234, A335, and A312
Materials (Q)
1987 Design and Manufacture of Water-Tube
Steam Generating Plant (Including
Superheaters, Reheaters and Steel Tube
Economizers) Enquiry Case 3: Local Loads
(Q)
1989 Design and Manufacture of Water-Tube
Steam Generating Plant (Including
Superheaters, Reheaters and Steel Tube
Economizers) Enquiry Case 4: Methods for
Manual Examination of Fusion Welds in
Ferritic Steels (Q)
1988 Design and Manufacture of Water-Tube
Steam Generating Plant (Including
Superheaters, Reheaters and Steel Tube
Economizers) Enquiry Case 5: British
Standard Forging and Pipe Materials (Q)
1990 Design and Manufacture of Water-Tube
Steam Generating Plant (Including
Superheaters, Reheaters and Steel Tube
Economizers) Enquiry Case 6: Use of BS
3604 591 Material (Q)
1998 Enquiry Case 7: Use of Butt Welds in
Tubes for Manufacture of Coil Type Boilers/
Superheaters Issue 2; (Q)
1992 Design and Manufacture of Water-Tube
Steam Generating Plant (Including
Superheaters, Reheaters and Steel Tube
Economizers) Enquiry Case 7: Use of Butt
Welds in Tubes for Manufacture of Coils for
Coil Type Boilers/ Superheaters (Q)
1992 Design and Manufacture of Water-Tube
Steam Generating Plant (Including
Superheaters, Reheaters and Steel Tube
Economizers) Enquiry Case 8: Ultrasonic
Acceptance Criteria (Q)
1964 Bare Fine Resistance Wire for Precision
Electrical Equipment Part 1: Inch Units
BS 1117 PART 2
BS 1123 PART 1
BS 1113 ENQ CASE 9
BS 1113 ENQ CASE INTRO
BS 1113 ENQ CASE INTRO
BS 1113 ENQ CASE INTRO
BS 1127 PART 1
BS 1127 PART 2
BS 1127 PART 3
BS 1127 PART 4
BS 1127 PART 5
BS 1129
BS 1129
1964 Bare Fine Resistance Wire for Precision
Electrical Equipment Part 2: Metric Units
1987 Safety Valves, Gauges and Fusible
Plugs for Compressed Air or Inert Gas
Installations Part 1: Code of Practice for
Installation
1993 Design and Manufacture of Water-Tube
Steam Generating Plant (Including
Superheaters, Reheaters and Steel Tube
Economizers) Enquiry Case 9: Welding
Procedure Specification, Welding Procedure
Approval and Welder Approval (Q)
1999 Specification for Design and
Manufacture of Water-Tube Steam
Generating Plant (Including Superheaters,
Reheaters and Steel Tube Economizers)
Enquiry Cases - Introduction Issue 2; (Q)
1998 Design and Manufacture of Water-Tube
Steam Generating Plant (Including
Superheaters, Reheaters and Steel Tube
Economizers) Enquiry Cases - Introduction
Issue 1; (Q)
1994 Design and Manufacture of Water-Tube
Steam Generating Plant (Including
Superheaters, Reheaters and Steel Tube
Economizers) Enquiry Cases-Introduction
(Q)
1990 Screwing Dies and Dienuts Part 1:
Hand - and Machine-Operated Circular
Screwing Dies and Hand- Operated Die
Stocks
1990 Screwing Dies and Dienuts Part 2:
Hand - and Machine-Operated Circular
Screwing Dies for Taper Pipe Threads R
Series
1990 Screwing Dies and Dienuts Part 3:
Hand - and Machine-Operated Circular
Screwing Dies for Parallel Pipe Threads; G
Series
1990 Screwing Dies and Dienuts Part 4:
Terminology for Circular Screwing Dies
1990 Screwing Dies and Dienuts Part 5:
Dimensions of Hexagonal Dienuts
1990 Portable Timber Ladders, Steps,
Trestles and Lightweight Stagings
1990 Amd 1 Portable Timber Ladders, Steps,
BS 1129
BS 1129
BS 1129
BS 1133 CH 7.5
BS 1133 SEC 1-3
BS 1133 SEC 12
BS 1133 SEC 14
BS 1133 SEC 15
BS 1133 SEC 16
BS 1133 SEC 16
BS 1133 SEC 19
BS 1133 SEC 22
BS 1133 SEC 4
BS 1133 SEC 4
BS 1133 SEC 5
BS 1133 SEC 21
BS 1133 SEC 7.1
Trestles and Lightweight Stagings (AMD
7414) January 15, 1993
1990 Amd 2 Portable Timber Ladders, Steps,
Trestles and Lightweight Stagings (AMD
7896) September 15, 1993 (R)
1990 Amd 3 Portable Timber Ladders, Steps,
Trestles and Lightweight Stagings (AMD
8871) October 15, 1995 (R)
1990 Amd 4 Portable Timber Ladders, Steps,
Trestles and Lightweight Stagings AMD
10380; February 1999; Incorporating
Amendments Nos. 1, 2, 3 and 4; (R)
1990 Packaging Code Section 7: Paper and
Board Wrappers, Bags and Containers:
Chapter 7.5: Fibreboard Cases (H)
1989 Packaging Code Section 1-3:
Introduction to Packaging
1986 Packaging Code Section 12: Methods
of Protection Against Shock (Excluding
Cushioning Devices)
1985 Packaging Code Section 14: Adhesive
Closing and Sealing Tapes
1991 Packaging Code Section 15: Tensional
Strapping (H)
1987 Packaging Code Section 16: Adhesives
for Packaging (PNS 714:1992)
1987 Amd 1 Packaging Code Section 16:
Adhesives for Packaging (AMD 7839)
August 15, 1993 (H)
1986 Packaging Code Section 19: Use of
Desiccants in Packaging
1989 Packaging Code Section 22: Packaging
in Plastics Containers
1991 Packaging Code Section 4: Mechanical
Aids in Package Handling
1965 Packaging Code Section 4: Mechanical
Aids in Package Handling
1985 Packaging Code Section 5: Protection
Against Spoilage of Packages and Their
Contents by Micro-Organisms, Insects, Mites
and Rodents
1991 Packaging Code Section 21:
Regenerated Cellulose Film, Films Made of
Plastics, Aluminium Foil, Flexible Multilayer
Structures and Metallized Materials (H)
1986 Packaging Code Section 7: Paper and
BS 1133 SEC 8
BS 1133 SEC 8
BS 1133 SUBSEC 10.1
BS 1133 SUBSEC 10.2
BS 1133 SUBSEC 6.1
BS 1133 SUBSEC 6.2
BS 1133 SUBSEC 7.2
BS 1133 SUBSEC 7.2
BS 1133 SUBSEC 7.3
BS 1133 SUBSEC 7.4
BS 1133 SUBSEC 7.5
BS 1133 SUBSEC 7.6
BS 1133 SUBSEC 7.7
BS 1134 PART 1
BS 1134 PART 2
Board Wrappers, Bags and Containers:
Section 7.1: Wrapping Papers
1981 Packaging Code Section 8: Wooden
Containers
1991 Packaging Code Section 8: Wooden
Boxes, Cases and Crates (H)
1990 Packaging Code Section 10: Metal
Containers Subsection 10.1: Tins and Cans
1991 Packaging Code Section 10: Metal
Containers Subsection 10.2: Metal Drums
1991 Packaging Code Section 6: Protection
of Metal Surfaces Against Corrosion During
Transport and Storage Subsection 6.1:
Cleaning and Drying of Metal Surfaces
1991 Packaging Code Section 6: Protection
of Metal Surfaces Against Corrosion During
Transport and Storage Subsection 6.2:
Temporary Protectives and Their Application
1986 Packaging Code Section 7: Paper and
Board Wrappers, Bags and Containers
Section 7.1: Wrapping Papers Subsection 7.1:
Bags and Envelopes
1986 Amd 1 Packaging Code Section 7:
Paper and Board Wrappers, Bags and
Containers Subsection 7.2: Bags and
Envelopes (AMD 7215) August 15, 1992 (H)
1986 Packaging Code Section 7: Paper and
Board Wrappers, Bags and Containers
Subsection 7.3: Cartons and Boxes
1989 Packaging Code Section 7: Paper and
Board Wra