RUSHABH ENTERPRISE
T.NO MOB”9322246700 /9122 25060260
European Material Safety Data Sheet
Industrial absorbent for all liquids and semi-liquids
Product description:
Expanded volcanic mineral treated with a patented surfactant that allows it to
break through the surface tension of the liquid to be absorbed instantaneously.
Absorbent for all liquids and semi-liquids: Solvents; Oils; Hydraulic Fluid;
Brake Fluid; Glycol; Acid; Base; Epoxy; Glue Paint; Resins; Polymers….
Will not contaminate foods and is authorized in France by the law of September
8th 1999.
Features:
INSTAZORB has the power to extract the hardest spills even from surfaces like
cement or concrete.
INSTAZORB is very cost effective, it reduces clean up costs, labor costs,
disposable costs, slip and fall liability, and even shipping costs.
INSTAZORB has 4 times the absorbing capacity of the nearest competition
(example: 100g of INSTAZORB to absorb 463 g of oil).
INSTAZORB is equal to 3 to 4 bags of clay based absorbents.
INSTAZORB will not leach into the environment and therefore helps preserve
our underground rivers.
INSTAZORB is easy to handle and carry, because one bag containing 40 liters
weighs only 5 kilos. Moreover it is perfect in order to conform to the ISO 14001
norm.
Ingredients:
Expanded volcanic mineral treated with a patented surfactant.
Physical Characteristics and Chemical Characteristics:
check MSDS EPA and TEST attachment
Place of usage:
All industries and public administrations
Directions of usage:
1. Pour INSTAZORB on the spill
2. Using a stiff broom, sweep INSTAZORB through the liquid back and forth
until the spill is totally absorbed. It absorbs on CONTACT!
3. Pick up the saturated absorbent with a dust pan and dispose of it in a suitable
container
Precautions:
There is no particular precautions to have per say with INSTAZORB, but there
may be some precautions to have depending on the absorbed liquid.
*INSTAZORB cannot be used for Hydrofluoric acid.
Recommendations:
Pour the powder directly on the spill and not in the atmosphere.
Once used; close the bag.
Storage:
In the original package, away from humidity its shelflife is unlimited.
Packaging: INSTAZORB
40 liter polyethylene bag: approximately 5 Kg
Composition:
Substance: Expanded volcanic mineral treated with a patented surfactant.
Dangerous substance: NONE
CAS number : 93763-70-30
Hazardous identification:
In huge doses, the dust would be considered as a nuisance,
No chronic or health hazards known,
Is non carcinogenic.
First Aide Measures:
After strong accidental inhalation: Bring subject to a place with fresh air, if
persistence in respiratory problems, call a doctor.
After contact with skin: NONE
After contact with eyes: Wash thoroughly with water.
After accidental ingestion: Do not induce vomiting, rinse the throat and drink
water.
Flammability:
Inflammable product
Accidental dispersion:
Refrain from creating dust.
Use a dust mask and goggles in case of strong dust particles are airborne.
Recuperation: Simply sweep.
Elimination: By incineration or in controlled waste landfills.
Handling and Storage:
Handling:
Refrain from creating dust.
Repair immediately broken bags.
Storage: It is recommended to store away from the outside weather.
Individual Protection:
Technical measures: If the air is filled with dust, ventilate in a adequate matter.
Respiratory protection: Use a mask in case of excess dust occurring while
pouring.
Eye protection: Use goggles in case of excess dust occurring while pouring.
Hand Protection: NONE
Physical and Chemical Characteristics:
Same as Above
Stability and Reactivity:
Conditions to avoid: NONE
Chemical incompatibility: Hydrofluoric acid.
Toxicity Information:
For frequent accidental contact: None toxic in normal usage conditions.
Effects on Health: Irritation of upper respiratory pathway.
Primary irritating effects: Can cause temporary eye irritation.
Chronic toxicity: NONE
Carcinogenicity: Is not considered a carcinogen
Silicoses: NONE
Ecological information:
Danger for water: Class 0, considered non dangerous.
Non biodegradable product.
Consideration measures to elimination:
Once pollutant is absorbed use incineration or controlled waste landfills methods
Transport Information:
Classified as non-hazardous by different regulations considering transports such
as land, air, and sea freights.
Regulations:
The product does not have to be identified following the European Community
directives.
Other information:
This MSDS corresponds to the absorbent in its pure form. The absorbent
containing the pollutant is systematically considered in the class of the pollutant
absorbed.