Mise en oeuvre d`un système photonique

advertisement
SP1
sion_forme
Vi-
DOSSIER TECHNIQUE
DE T E CT I ON D’ OB J E T S P A R COU LE U R E T F OR M E
(S Y S T E ME D E VI S I O N I N D U S T R I E L L E )
Comporte les documents suivants :
 Caractéristiques des caméras bluefox 2XX
 Sensibilité spectrale des bluefox 2XX
 Caractéristiques de la bleufox 102C.
 Sensibilité spectrale de la bluefox 102C:
cadre 1
cadre 2
cadre 3
cadre 4
S.T.S Systèmes Photoniques – Lycée Jean Mermoz – 68300 SAINT-LOUIS
1/4
SP1
sion_forme
Vi-
cadre 1 : Caractéristiques des caméras bluefox 2XX
cadre 2 : Sensibilité spectral des bluefox 2XX
S.T.S Systèmes Photoniques – Lycée Jean Mermoz – 68300 SAINT-LOUIS
2/4
SP1
sion_forme
Vi-
Sensor facts: CMOS - 1280x1024 pixels (-102C)
Free running mode
In free running mode, the sensor reaches its maximum frame rate. This is done by overlapping erase,
integration and readout phase. The sensor timing in free running mode is fixed, so there is no control
when to start an acquisition. This mode is used with trigger mode ctmContinous.
In free running mode the following frame frame rates where measured:
résolution
frame rate (with minimum integration)(*1)
1280 x 1024
18.2 Hz
640 x 480
70 Hz
256 x 256
253 Hz
256 x 64
1100 Hz
(*1) Please note that frame rate will be reduced if you increase the integration time above 1/frame rate.
Sensor Data
Device Structure
 Progressive scan CMOS image sensor
 Image size: 7.8(H)x6.2(V) mm (Type 1/2")
 Number of effective pixels: 1280 (H) x 1024 (V)
 Unit cell size: 6µm (H) x 6µm (V)

cadre 3 : Caractéristiques de la bleufox 102C.
S.T.S Systèmes Photoniques – Lycée Jean Mermoz – 68300 SAINT-LOUIS
3/4
SP1
sion_forme
Vi-
cadre 4 : Sensibilité spectrale de la bluefox 102C:
S.T.S Systèmes Photoniques – Lycée Jean Mermoz – 68300 SAINT-LOUIS
4/4
Download