(insert institution name)
(Insert Project Title)
Schematic Design Booklet
(Insert Project Image)
(Insert Month, Date)
(Institution & Project Title)
1
Table of Contents
I.
Project Location
(page)
II.
Renderings
(page)
III.
Floor Plans
(page)
IV.
Design Narratives
(page)
(Institution & Project Title)
2
I.
Project Location
A. Site Map
1. Insert General Campus Map with Project Location
2. Label major roads and landmarks (i.e.; Memorial Union)
3. Highlight major landmarks and project location
4. Provide Legend (if required) to clarify location & project components
5. Limit map size to one 8 1/2 x 11 inch page
6. Include graphic scale
7. Include North Arrow
B. Site Plan
1. Insert General Vicinity Site Plan Map with Project Location
2. Label major roads and campus spaces (i.e.; Central Campus)
3. Provide Legend (if required) to clarify location & project components
4. Limit map size to one 8 1/2 x 11 inch page
5. Include graphic scale
6. Include North Arrow
C. General Booklet Requirements
1. Use 8 1/2 x 11 inch page layout (portrait) format only
2. Use sans serif font only - 1/8 inch (12 pt) minimum on all images
3. Provide Legend (if required) to clarify location & project components
4. Include North Arrows on all plans
5. Check all spelling and proof-read text prior to submittal
(Institution & Project Title)
3
II.
Renderings
A. Exterior View (not required for interior only projects)
1. Insert exterior project renderings to describe project (two images per page
maximum)
2. Identify image view points (i.e.; Northeast Aerial View; Northwest Street Level
View)
3. Include only those distinct images required to illustrate project character
4. Images shall illustrate project in campus context
B. Interior Views (if required to illustrate project character)
1. Insert interior project renderings to describe project (two images per page
maximum)
2. Identify image view points (i.e. Lobby; Atrium View; Auditorium)
3. Include only those distinct images required to illustrate project character
C. General Booklet Requirements
1. Use 8 1/2 x 11 inch page layout (portrait )format only
2. Use sans serif font only - 1/8 inch (12 pt) minimum on all images
3. Provide Legend (if required) to clarify location & project components
4. Include North Arrows on all plans
5. Check all spelling and proof-read text prior to submittal
(Institution & Project Title)
4
III.
Floor Plans
A. Floor Plan(s) - New Buildings
1. Insert Floor Plan(s) to describe project (two plans per page maximum)
2. Provide Legend (if required) to clarify project components
3. Use consistent scale for all plans and include graphic scale on each
4. Include North Arrows on all plans
B. Floor Plan(s) – Interior Remodelings
1. Insert Existing Floor Plan(s) to describe project (two plans per page maximum)
2. Insert New Floor Plan(s) to describe project (two plans per page maximum)
3. Provide Legend (if required) to clarify project components
4. Use consistent scale for all plans and include graphic scale on each
5. Include North Arrows on all plans
C. General Booklet Requirements
1. Use 8 1/2 x 11 inch page layout (portrait) format only
2. Use sans serif font only - 1/8 inch (12 pt) minimum on all images
3. Provide Legend (if required) to clarify location & project components
4. Include North Arrows on all plans
5. Check all spelling and proof-read text prior to submittal
(Institution & Project Title)
5
IV.
Design Narratives
(Include general system narratives for each of the following. Limit this section to one or two
pages total).
A. Exterior Design Narrative
1. Include a general description of the exterior character and campus context
2. Do not duplicate any information found in the Capital Improvements Budget
Transactions (Cibt) narrative (if any)
B. Sustainable Design
1. Include a general description of the projects sustainable design goals &
objectives
2. Do not duplicate any information found in the Capital Improvements Budget
Transactions (Cibt) narrative (if any)
C. General Booklet Requirements
1. Use 8 1/2 x 11 inch page layout (portrait) format only
2. Use sans serif font only - 1/8 inch (12 pt) minimum on all images
3. Provide Legend (if required) to clarify location & project components
4. Include North Arrows on all plans
5. Check all spelling and proof-read text prior to submittal
G
(Institution & Project Title)
6