MATERIAL SAFETY DATA SHEET
PRODUCT NAME:
REVISION DATE:
ECOPOL-5060LMS
JUNE 15, 2009
For Chemical Emergency (Spill, Leak, Fire, Exposure or Accident)
CALL CHEMTREC Day or Night 800-424-9300
For International, Call 703-527-3887 (Collect Calls Accepted)
** FOR INDUSTRIAL USE ONLY **
Section I - Product Information and Company Identification
Chemical Name: BLEND
Formula: NA
DOT: Not Regulated
CANADIAN, ADR, ICAO/IATA, SEA TRANSPORTATION, IMDG ALL NOT
RESTRICTED
Section II – Composition, Information on Ingredients
Material
Cas #
Percent TLV(units)
Hazard
1) Petroleum distillate blend NA
30-60
NA
combustible
2) Polysaccharide blend
NA
30-60
NA
Section III – Hazards Identification
Hazard Overview: May cause eye, skin, and respiratory irritation. May cause headache,
dizziness, and other central nervous system effects. May cause allergic respiratory
reaction. May be harmful if swallowed.
Section IV – First Aid Measures
Eyes: Flush thoroughly with running water at least 15 minutes. Get medical attention if
irritations persist.
Skin: Remove contaminated clothing and wash contact area with soap and water for 15
minutes.
Inhalation: In case of exposure to a high concentration, remove person to fresh air. If
breathing has stopped, administer artificial respiration and seek medical attention.
Ingestion: If appreciable quantities are swallowed, seek medical attention.
Section V - Fire & Explosion Hazard Data
Extinguishing Media: Water spray, Foam, CO2, Dry Chemical
Economy
Polymers & Chemicals
P.O. Box 450246
Houston, TX 77245-0246
USA Toll free: (800) 231-2066
Phone: (713) 723-8416
Fax: (713) 723-1845
URL: www.EconomyPolymers.com
E-mail: economy@economypolymers.com
Special Fire Fighting Procedures: Wear a self contained breathing apparatus to avoid
toxic fumes. Slippery when wet.
Fire & Explosion Hazards: Closed containers may rupture (due to buildup of pressure)
when exposed to extreme heat. Cool drums exposed to flames with a water spray.
*Additional information will be provided in a medical emergency to qualified medical
personnel.
Section VI – Accidental Release Measures
*Stop flow and contain spill by diking, sandbags, etc.
*Eliminate all ignition sources.
*Incinerate using afterburner and scrubber
*Use skin protection (as per section VIII)
*Absorb on inert material and scraps up or shovel into drums
*Observe federal spill and water quality regulations.
Section VII – Handling and Storage
Handling Precautions: Avoid contact with eyes, skin, or clothing. Avoid breathing
vapors. Wash hands after use. Launder contaminated clothing before reuse.
Storage Information: Store away from oxidizers. Store in a cool well ventilated area.
Keep from heat, sparks, and open flames. Keep container closed when not in use.
Section VIII - Personal Protection Information
Air Exposure Recommendations
Gas, Fumes, Mists
Special Thermal
Normal Use
Exceeds TLV
Spray Application
General Ventilation
General Ventilation
General Ventilation
3*
3*
3*
*Respiratory protection codes:
1. None Needed
2. Particle-removing, air purifying respirator (Dusk Mask)
3. Gas and vapor-removing, air purifying respirator (Canister)
4. Full face mask, positive pressure-demand type (Air Supplied)
Eye Protection: Goggles, Face Shield
Skin Protection: Neoprene Gloves, Nitrile Gloves
Other Protective Equipment: Chemical Resistant Apron, Shoes
Flash Point:
Boiling Point:
Economy
Polymers & Chemicals
Section IX - Physical Data
180oF
Autoignition Temp.
400-700oF
pH range:
ND
6.5-8.0
P.O. Box 450246
Houston, TX 77245-0246
USA Toll free: (800) 231-2066
Phone: (713) 723-8416
Fax: (713) 723-1845
URL: www.EconomyPolymers.com
E-mail: economy@economypolymers.com
Color:
Physical state:
% Volatiles
Density (lbs/gal.)
Beige
liquid
ND
8.76
Odor:
Specific Gravity
Vapor Density
Hydrocarbon
1.05
ND
Section X - Reactivity Data
Stability: Stable Hazardous Polymerization: Will not occur
Conditions to avoid: Keep away from heat, sparks, and flame
Incompatibility (Materials to Avoid): Strong oxidizers
Hazardous Decomposition Products: Fumes produced when heated to
decomposition may include: oxides of carbon.
NFPA RATINGS: HEALTH 1, FLAMMABILITY 2, REACTIVITY 0
HIMS RATINGS: FLAMMABILITY 2, REACTIVITY 0, HEALTH
Section XI – Toxicological Information
Threshold Limit Value (TLV) for Product: None Established.
Does product contain any OSHA, NTP or IARC Carcinogens? No
Nature of Hazard (Physiological Effects)
Signs & Systems of Overexposure in the Workplace
Principle Route of Exposure: Eye or skin contact, inhalation
Eyes: May cause irritation.
Skin: Causes drying of the skin. May cause mild irritation
Inhalation: May cause respiratory irritation. May cause allergic reaction. May cause
chemical pneumonia. May cause nervous system depression including headache,
dizziness, drowsiness, incoordination, slowed reaction time, slurred speech, giddiness,
and unconsciousness
Ingestion: Irritation of the mouth, throat, and stomach. Aspiration into the lungs may
cause chemical pneumonitis including coughing, difficulty breathing, wheezing,
coughing up blood and pneumonia, which can be fatal. May cause central nervous
system depression including headache, dizziness, drowsiness, muscular weakness,
incoordination, slowed reaction time, fatigue, blurred vision, slurred speech, giddiness,
tremors, and convulsions
MEDICAL CONDITIONS GENERALLY RECOGNIZED AS BEING AGGRAVATED
BY EXPOSURE: Skin disorders
CANCER INFORMATION: Contains no carcinogenic substances.
Special Precautions: Individuals with skin or respiratory diseases should not be exposed
to this product unless properly protected.
Economy
Polymers & Chemicals
P.O. Box 450246
Houston, TX 77245-0246
USA Toll free: (800) 231-2066
Phone: (713) 723-8416
Fax: (713) 723-1845
URL: www.EconomyPolymers.com
E-mail: economy@economypolymers.com
Section XII – Ecological Information
No data available
Section XIII – Disposal Considerations
Disposal Method: Disposal should be made in accordance with federal, state, and local
regulations
Contaminated Packaging: Follow all applicable national or local regulations.
Section XIV – Transport Information
DOT: Not Regulated
49CFR 173.120(3): A combustible liquid that does not sustain combustion is not subject
to the requirements of this subchapter as a combustible liquid. Either the test method
specified in ASTM D 4206 or the procedure in appendix H of this part may be used to
determine if a material sustains combustion when heated under test conditions and
exposed to an external source of flame.
Canadian TDG: Not restricted
ADR: Not Restricted
ICAO/IATA: Not Restricted
IMDG: Not Restricted
Section XV – Regulatory Information
Is product RCRA regulated? No
Are all ingredients listed in the TSCA Inventory? Yes
Ingredients regulated by the Clean Air Act or the Clean Water Act: None
EPA SARA (311, 312) Hazard Class: Acute Health Hazard, Fire Hazard
MA Right-to-Know Law: One of more components listed
Canadian DSL Inventory: Product contains one or more components not listed on
inventory
WHMIS Hazard Class: B3 Combustible Liquids
Section XVI – Miscellaneous
Disclaimer: **This information is furnished without warranty, expressed or implied, as to accuracy for
completeness. This information is obtained from various sources including the manufacturer and other
third party sources. The information may not be valid under all conditions nor if this material is used in
combination with other materials or in any process. Final determination of suitability of any material is the
sole responsibility of the user
Economy
Polymers & Chemicals
P.O. Box 450246
Houston, TX 77245-0246
USA Toll free: (800) 231-2066
Phone: (713) 723-8416
Fax: (713) 723-1845
URL: www.EconomyPolymers.com
E-mail: economy@economypolymers.com