MATERIAL SAFETY DATA SHEET PRODUCT NAME: REVISION DATE: ECOPOL-5060LMS JUNE 15, 2009 For Chemical Emergency (Spill, Leak, Fire, Exposure or Accident) CALL CHEMTREC Day or Night 800-424-9300 For International, Call 703-527-3887 (Collect Calls Accepted) ** FOR INDUSTRIAL USE ONLY ** Section I - Product Information and Company Identification Chemical Name: BLEND Formula: NA DOT: Not Regulated CANADIAN, ADR, ICAO/IATA, SEA TRANSPORTATION, IMDG ALL NOT RESTRICTED Section II – Composition, Information on Ingredients Material Cas # Percent TLV(units) Hazard 1) Petroleum distillate blend NA 30-60 NA combustible 2) Polysaccharide blend NA 30-60 NA Section III – Hazards Identification Hazard Overview: May cause eye, skin, and respiratory irritation. May cause headache, dizziness, and other central nervous system effects. May cause allergic respiratory reaction. May be harmful if swallowed. Section IV – First Aid Measures Eyes: Flush thoroughly with running water at least 15 minutes. Get medical attention if irritations persist. Skin: Remove contaminated clothing and wash contact area with soap and water for 15 minutes. Inhalation: In case of exposure to a high concentration, remove person to fresh air. If breathing has stopped, administer artificial respiration and seek medical attention. Ingestion: If appreciable quantities are swallowed, seek medical attention. Section V - Fire & Explosion Hazard Data Extinguishing Media: Water spray, Foam, CO2, Dry Chemical Economy Polymers & Chemicals P.O. Box 450246 Houston, TX 77245-0246 USA Toll free: (800) 231-2066 Phone: (713) 723-8416 Fax: (713) 723-1845 URL: www.EconomyPolymers.com E-mail: economy@economypolymers.com Special Fire Fighting Procedures: Wear a self contained breathing apparatus to avoid toxic fumes. Slippery when wet. Fire & Explosion Hazards: Closed containers may rupture (due to buildup of pressure) when exposed to extreme heat. Cool drums exposed to flames with a water spray. *Additional information will be provided in a medical emergency to qualified medical personnel. Section VI – Accidental Release Measures *Stop flow and contain spill by diking, sandbags, etc. *Eliminate all ignition sources. *Incinerate using afterburner and scrubber *Use skin protection (as per section VIII) *Absorb on inert material and scraps up or shovel into drums *Observe federal spill and water quality regulations. Section VII – Handling and Storage Handling Precautions: Avoid contact with eyes, skin, or clothing. Avoid breathing vapors. Wash hands after use. Launder contaminated clothing before reuse. Storage Information: Store away from oxidizers. Store in a cool well ventilated area. Keep from heat, sparks, and open flames. Keep container closed when not in use. Section VIII - Personal Protection Information Air Exposure Recommendations Gas, Fumes, Mists Special Thermal Normal Use Exceeds TLV Spray Application General Ventilation General Ventilation General Ventilation 3* 3* 3* *Respiratory protection codes: 1. None Needed 2. Particle-removing, air purifying respirator (Dusk Mask) 3. Gas and vapor-removing, air purifying respirator (Canister) 4. Full face mask, positive pressure-demand type (Air Supplied) Eye Protection: Goggles, Face Shield Skin Protection: Neoprene Gloves, Nitrile Gloves Other Protective Equipment: Chemical Resistant Apron, Shoes Flash Point: Boiling Point: Economy Polymers & Chemicals Section IX - Physical Data 180oF Autoignition Temp. 400-700oF pH range: ND 6.5-8.0 P.O. Box 450246 Houston, TX 77245-0246 USA Toll free: (800) 231-2066 Phone: (713) 723-8416 Fax: (713) 723-1845 URL: www.EconomyPolymers.com E-mail: economy@economypolymers.com Color: Physical state: % Volatiles Density (lbs/gal.) Beige liquid ND 8.76 Odor: Specific Gravity Vapor Density Hydrocarbon 1.05 ND Section X - Reactivity Data Stability: Stable Hazardous Polymerization: Will not occur Conditions to avoid: Keep away from heat, sparks, and flame Incompatibility (Materials to Avoid): Strong oxidizers Hazardous Decomposition Products: Fumes produced when heated to decomposition may include: oxides of carbon. NFPA RATINGS: HEALTH 1, FLAMMABILITY 2, REACTIVITY 0 HIMS RATINGS: FLAMMABILITY 2, REACTIVITY 0, HEALTH Section XI – Toxicological Information Threshold Limit Value (TLV) for Product: None Established. Does product contain any OSHA, NTP or IARC Carcinogens? No Nature of Hazard (Physiological Effects) Signs & Systems of Overexposure in the Workplace Principle Route of Exposure: Eye or skin contact, inhalation Eyes: May cause irritation. Skin: Causes drying of the skin. May cause mild irritation Inhalation: May cause respiratory irritation. May cause allergic reaction. May cause chemical pneumonia. May cause nervous system depression including headache, dizziness, drowsiness, incoordination, slowed reaction time, slurred speech, giddiness, and unconsciousness Ingestion: Irritation of the mouth, throat, and stomach. Aspiration into the lungs may cause chemical pneumonitis including coughing, difficulty breathing, wheezing, coughing up blood and pneumonia, which can be fatal. May cause central nervous system depression including headache, dizziness, drowsiness, muscular weakness, incoordination, slowed reaction time, fatigue, blurred vision, slurred speech, giddiness, tremors, and convulsions MEDICAL CONDITIONS GENERALLY RECOGNIZED AS BEING AGGRAVATED BY EXPOSURE: Skin disorders CANCER INFORMATION: Contains no carcinogenic substances. Special Precautions: Individuals with skin or respiratory diseases should not be exposed to this product unless properly protected. Economy Polymers & Chemicals P.O. Box 450246 Houston, TX 77245-0246 USA Toll free: (800) 231-2066 Phone: (713) 723-8416 Fax: (713) 723-1845 URL: www.EconomyPolymers.com E-mail: economy@economypolymers.com Section XII – Ecological Information No data available Section XIII – Disposal Considerations Disposal Method: Disposal should be made in accordance with federal, state, and local regulations Contaminated Packaging: Follow all applicable national or local regulations. Section XIV – Transport Information DOT: Not Regulated 49CFR 173.120(3): A combustible liquid that does not sustain combustion is not subject to the requirements of this subchapter as a combustible liquid. Either the test method specified in ASTM D 4206 or the procedure in appendix H of this part may be used to determine if a material sustains combustion when heated under test conditions and exposed to an external source of flame. Canadian TDG: Not restricted ADR: Not Restricted ICAO/IATA: Not Restricted IMDG: Not Restricted Section XV – Regulatory Information Is product RCRA regulated? No Are all ingredients listed in the TSCA Inventory? Yes Ingredients regulated by the Clean Air Act or the Clean Water Act: None EPA SARA (311, 312) Hazard Class: Acute Health Hazard, Fire Hazard MA Right-to-Know Law: One of more components listed Canadian DSL Inventory: Product contains one or more components not listed on inventory WHMIS Hazard Class: B3 Combustible Liquids Section XVI – Miscellaneous Disclaimer: **This information is furnished without warranty, expressed or implied, as to accuracy for completeness. This information is obtained from various sources including the manufacturer and other third party sources. The information may not be valid under all conditions nor if this material is used in combination with other materials or in any process. Final determination of suitability of any material is the sole responsibility of the user Economy Polymers & Chemicals P.O. Box 450246 Houston, TX 77245-0246 USA Toll free: (800) 231-2066 Phone: (713) 723-8416 Fax: (713) 723-1845 URL: www.EconomyPolymers.com E-mail: economy@economypolymers.com