Page 1
Product : Bur Cleaning Brush, Brass Wire.
Classification : These instruments are not used in the mouth and are therefore not Medical Devices.
Schedule of Products (Ref):
BUR002 Bur Cleaning Brush, Brass Wire
BUR008 Bur Cleaning Brush, Brass Wire
Description : Stoddard Bur Cleaning Brush, brass wire is used for the cleaning of dental burs or cutters in the clinic or in the Dental laboratory. They are 2 component/material products filled in brass wire or nylon.
Standard Packaging : Pack of 10 or 100 pieces.
Component 1 .
Tube / Ferrule Aluminium 750 x 625 DX 5941 IDX0148 Annealed
Ref: COM017
,
,
aluminium, Al, 13
,
,
,
,
−1
[
] 3s
2
3p
1
per
2, 8, 3
(near
)
2.70
−3
Liquid
at
2.375 g·cm −3
933.47
(660.32 °
, 1220.58 °
)
2792
(2519 °
, 4566 °
)
10.71
−1
294.0
−1
(25 °C) 24.200 J·mol −1 ·K −

Page 2
www.stoddard.co.uk
MATERIAL DATA SHEET
Component (fill material) for:- Bur Cleaning Brush, Brass Wire.
Ref: BUR002
Material description:- Crimped Brass wire.0.008” 0.20mm 36G x 5.3/4” Fine drawn ( long flat 2007 crimp ).
Ref: WIR002A
Composition:
Cu 68.5 – 71.5 %
Fe 0.05 %
Pd 0.07 %
Al 0.10 %
Zn Rem
These materials may also contain trace elements that are non hazardous or non hazardous at the levels of inclusion.
Physical Data:
Odour:- none
Specific gravity:- not applicable
Vapour density:- not applicable
Vapour pressure:- not applicable
Boiling point:- not applicable
Solubility in water:- Insoluble
Melting point:- not applicable
Colour Type:- metallic/yellow
Physical state:- solid
Sizes / dimensions
: Diameter 0.008” ” 0.20mm 36G x 5.3/4” Fine drawn ( long flat 2007 crimp )
Stability and reactivity:
Chemical stability: Stable at normal temperature and storage conditions.
Incompatibility with other materials: None reasonable or foreseeable
Hazardous decomposition products: Decomposition will not occur
Hazardous polymerisation: Polymerisation will not occur.
Handling and Storage : There are no specific handling requirements, store in clean dry conditions at room temperature.
Toxicology : There is no toxicological data specific to this product.
Waste Disposal :
Waste is not harmful. The handling, storage, transportation and disposal are generally performed similarly to those of other general wastes designated by the nation or local government. Do not wash off with water or flush to drains because material is principally non-biodegradable.
This product may be Incinerated or landfill in compliance with local and national regulations.
Recycling is recommended.
Fire and explosion data:
Flash point (method): not applicable, Flash ignition temp: not applicable,
Extinguishing media: water, carbon dioxide foam, dry chemicals.
Special fire fighting instructions: none
Health hazard information:
Brass in solid wire form is not hazardous to health..
Ingestion: not a probable route of exposure

Page 3
www.stoddard.co.uk
MATERIAL DATA SHEET
Component (fill material) for:- Bur Cleaning Brush, Brass Wire.
Ref: BUR002
Hazardous reactivity:
Stability: stable, Conditions to avoid: heating above 340

C, Incompatibility:strong acids, bases and oxidising agents.
Health hazard information:
Ingestion:- accidental ingestion is not harmful or a probable route of exposure
Inhalation:- not respirable
Allergy:- not applicable.
Hazardous reactivity:
Stability:- stable
Incompatibility:- strong acids, bases oxidising agents
First aid measures (in case of):
Inhalation:- There are no poisoning risks.
Skin contact :- Do not use in the case of a specific allergy.
In case of permanent irritation, call for physician
Contact with eyes:- In case of accident or accidental contact with the instrument call for physician.
Fire and explosion data:
Extinguishing media:- Atomised water jet, carbon dioxide foam, dry chemicals
Special fire fighting instructions:- none
Accidental dispersion :- not applicable
Handling and Storage :- Store dry at room temperature away from light. Avoid temperature > 70

Disposal procedures:
Aquatic toxicity:- very low toxicity
Spill or leak:- not applicable
Waste disposal:- incinerate or landfill in compliance with federal, state & local Regulations.
Recycling is recommended.
Transportation: - The product should be transported in original containers to avoid damage or leakage.
Keep containers dry.

Page 4
STODDARD MANUFACTURING COMPANY LIMITED www.stoddard.co.uk
MATERIAL DATA SHEET
Component (fill material) for:- Bur Cleaning Brush, Nylon.
Ref: BUR008
Material description: Nylon filament 0.61mm (0.024”).Ref: NYL011
Specification:
Polyhexamethylene Dodecanamide (nylon)
CAS No. 26098-55-5
Colour: Natural
Physical data:
Melting point:208-215

C
Boiling point:- not applicable
Solubility in water:- insoluble
Evaporation rate:- not applicable
Specific gravity:- 1.05-1.07
Fire and explosion data:
Flash point (method):- not applicable
Flash ignition temp:- 400

C (ASTM D1929)
Extinguishing media:- water, carbon dioxide foam, dry chemicals
Special fire fighting instructions:- none
Health hazard information:
Nylon is not a hazardous material.
Ingestion:- not a probable route of exposure
Inhalation:- not respirable
Hazardous reactivity:
Stability:- stable
Conditions to avoid:- heating above 340

C
Incompatibility:- strong acids, bases oxidising agents
Decomposition products:- carbon monoxide, ammonia, aldehydes
Disposal procedures:
Aquatic toxicity:- very low toxicity
Spill or leak:- sweep up to prevent slipping hazard
Waste disposal:- incinerate or landfill in compliance with federal state & local regulations.
Special protection information:
Ventilation:- local exhaust at processing equipment to keep particulate below 15mg/m ³ (OSHA limit for particulates not otherwise regulated)
Personal protection equipment:
Eyes:- not applicable
Gloves:- not applicable
Respirator:- not applicable