Technical data sheet Cod STP 14011

advertisement
Technical data sheet Cod STP 14010
CN SOLVENT BASED CONCENTRATES
Production date 13/07/1998
revision 1 date: 22/10/2003
_______________________________________________________________________
PRODUCT: CN SERIES SOLVENT BASED CONCENTRATES
DESCRIPTION: highly concentrated solvent based colours, suitable for mixing with top
coats to slightly modify the final colour and disguise any colour differences in the
substrate.
Available colours:
CN820 MAHOGANY
CN821 DARK WALNUT
CN822 ROSEWOOD
CN823 RED
CN824 BLACK
CN825 YELLOW
CN826 VIOLET
CN827 GREEN
CN828 BLUE
CN829 TEAK
CN830 ORANGE
CN831 DARK MAHOGANY
USE: furniture and fittings in general
APPLICATION: Add to transparent paints up to a maximum of 5%. The addition of the
CN concentrates does not alter the application method. If CN is added in excessive
quantities there could be some accumulation of colour in some places and the formation
of marks.
COMPATIBILITY: with nitro, acrylic and polyurethane paints.
POT LIFE AT 20°C: the addition of CN does not alter the characteristics of the product to
which it is added, and therefore pot life is as per the latter.
EXAMPLES OF PAINTING CYCLE: sanding of the bare wood followed by application of
the stain from the IN series. Application of transparent base coat, sanding and application
of the base/top coat with addition of 1-5% CN.
NB:
1) Do not use CN stains directly on bare wood as they are soluble colorants and would
bleed later
2) The CN concentrates can be mixed between themselves in any ratio.
3) Use AA1 (UV filter) in base and top coats to increase stability of coloration of the
items.
4) Always keep the containers well closed
PHYSICAL AND CHEMICAL PROPERTIES:
physical state:
coloured liquid
stability to bleeding:
not stable
light fastness:
good for indoors
shelf life at 20°C:
12 months in correctly stored unopened tin
flash point:
-4°C
_______________________________________________________________________
SPECIFICATIONS OF SUPPLIED PRODUCT
Characteristics
Units
Value
Method
Specific gravity at 20°C g/ml
0.88±0.05
MP01
Always verify the suitability of the product for the job to be done before application. We
can not accept responsibility for the outcome.
This technical data sheet is an official document of ICA S.p.a. There is no personal
signature on it because it is issued by an automatic system.
Download