III. Erection, reconstruction and capital repairs
1. Geodesic work carried out on building sites
1.1. Location survey in the course of construction operations carrying-out <*>
1.2. Geodesic accuracy control of geometric parameters of buildings and constructions <*>
2. Preparatory operations
2.1. Demolition (building-down) of buildings, constructions, walls, floors, stair flights and other
constructive and related elements and their parts <*>
2.2. Construction of temporary roads, sites, engineering networks and structures <*>
2.3. Installation of crane tracks and footings (supports) of stationary cranes
2.4. Installation and disassembling of external and internal work platforms and in-process rubbish
chutes <*>
3. Earthwork operations
3.1. Power-actuated earthwork<*>
3.2. Earthwork and drainage installation in water engineering
3.3. Earthwork by the method of hydraulic earth-moving
3.4. Artificial soil freezing
3.5. Earth compaction by rolls, soil compacting machines and heavy tamping <*>
3.6. Power-actuated ripping and permanently frozen soil working
3.7. Water draw-down, installation of superficial ran-offs and water drains
4. Wells-drilling
4.1. Drilling, construction and installation of oil and gas wells
4.2. Wells-drilling and infrastructure development (except for oil and gas wells)
4.3. Wells-casing with pipes, pipes extraction, pipes free descending or ascension from wells
4.4. Plug operations
4.5. Open wells construction
5. Pile-work. Soil stabilization
5.1. Pile-work operations carried out on ground, including those carried out in marine and river
environment
5.2. Pile-work operations carried out in frozen and permanently frozen soil
5.3. Foundation piling
5.4. Installation of driving piles and in-situ piles
5.5. Thermal soil stabilization
5.6. Cement stabilization of basement soil with injectors in-driving
5.7. Soil petrification and mastic gum stabilization
5.8. Erection of structures by the 'buried wall' method
5.9. Plunge and ascension of steel and matched piles
6. Erection of concrete and reinforced concrete monolithic structures.
6.1. Shuttering work
6.2. Rebar placement
6.3. Erection of monolithic concrete and reinforced concrete structures
7. Installation of precast concrete and reinforced concrete structures
7.1. Installation of foundations and substructures of constructions and buildings
7.2. Assembly of elements of superstructures of buildings and constructions including columns,
1
frames, collar beams, roof trusses, beams, slabs, booms, wall panels and parting walls.
7.3. Installation of box units, including ventilation units, elevators, refuse chute wells, and utility
cores
8. Construction blast hole drilling
9. Masonry structures installation
9.1. Installation of structures of buildings and constructions of natural and artificial stones including
structures with veneering <*>
9.2. Installation of brick structures including structures with veneering <*>
9.3. Installation of heating stoves and fire beds <*>
10. Installation of metal structures
10.1. Installation, reinforcement and disassembling of constructional elements and fencing
structures of buildings and constructions
10.2. Installation, reinforcement and disassembling of conveyor gallery constructions
10.3. Installation, reinforcement and disassembling of reservoir constructions
10.4. Installation, reinforcement and disassembling of tower constructions, peels, and suction pipes
10.5. Installation, reinforcement and disassembling of technological structures
Installation and disassembling of rope bearing structures (main carrier cables, cable-stayed
structures etc)
11. Installation of wooden structures
11.1. Installation, reinforcement and disassembling of construction elements and building envelops
of buildings and constructions including those of glued structures<*>
11.2. Installation of residential and public premises of factory made elements with full sets
supplies<*>
12. Protection of building structures, pipelines and equipment (except for arterial and industrial
pipelines)
12.1. Refractory-lined operations
12.2. Laying of acid-resistant bricks and figured acid-resistant brick ware
12.3 Protective covering with paintwork materials<*>
12.4. Rubber coating (rubber sheeting and liquid rubber compounds coating)
12.5. Surface coating
12.6. Metalized coating
12.7. Application of front coating in installation of monolithic floors in premises with corrosive
mediums
12.8. Preservative treatment of wood-works
12.9. Waterproofing of building structures
12.10. Thermal protection of buildings, building structures and equipment
12.11. Thermal protection of pipelines <*>
12.12. Fire protection of building structures and equipment
13. Roofing
13.1. Roofing with masonry units and plate materials <*>
13.2. Roofing with coil materials
13.3. Roofing with liquid materials
14. Frontal operations
2
14.1. Surface veneering with natural and artificial stones and line figurate stones <*>
14.2. Installation of ventilated facades <*>
15. Installation of internal engineering systems and equipment in buildings and constructions
15.1. Installation and disassembling of water supply and sewerage systems <*>
15.2. Installation and disassembling of heating systems <*>
15.3. Installation and disassembling of gas supply systems
15.4. Installation and disassembling of ventilation and air-conditioning systems <*>
15.5. Installation of power supply systems<*>
15.6. Installation of electrical and other networks of life support systems management in buildings
and constructions <*>
16. Installation of external water supply networks
16.1. Installation of water pipelines
16.2. Installation and disassembling of stop valves and equipment in water supply networks
16.3. Installation of water conduit wells, end walls, drainage suppressors
16.4. Cleaning of chambers and testing of pipelines in water supply systems
17. Installation of external sewerage networks
17.1. Installation of free-flow sewerage pipelines
17.2. Installation of pressure sewerage pipelines
17.3. Installation and disassembling of stop valves and equipment in sewerage networks
17.4. Installation of sewerage and water catch pits
17.5. Instillation of filtering primary structures for sludge beds and filtration areas
17.6. Installation of drainage pipes on sludge beds
17.7. Cleaning of chambers and testing of sewerage pipelines
18. Installation of external heating supply systems
18.1. Laying of heating supply pipelines with the temperature of the heat carrier up to 115
Centigrade
18.2. Laying of heating supply pipelines with the temperature of the heat carrier of 115 Centigrade
and more
18.3. Installation and disassembling of stop valves and equipment in heating supply networks
18.4. Installation of pits and chambers of heating supply networks
18.5. Cleaning of chambers and testing of heating supply pipelines
19. Laying of external gas supply networks, except for arterial networks
19.1. Laying of gas supply pipelines with the operation pressure up to 0.005 MPa inclusive
19.2. Laying of gas supply pipelines with the operation pressure from 0.005 MPa to 0,3 MPa
inclusive
19.3. Laying of gas supply pipelines with the operation pressure from 0.3 MPa to 1,2 MPa
inclusive (for natural gas), to 1.6 MPa inclusive (for liquified hydrocarbon gas)
19.4. Installation of condenser tanks of hydraulic locks and balance gears in gas pipelines
19.5. Installation and disassembling of gas distributing units and devices
19.6. Installation and disassembling of reservoir- and cluster cylinder-stored liquified gas devices
19.7. Introduction of gas pipelines into buildings and constructions
19.8. Installation and disassemble of gas equipment for suppliers using natural and liquified gas
19.9. Hot tapping into existing gas pipelines, hot cutoff and hot blinding of existing gas pipelines
19.10. Clearing of chambers and testing of gas pipelines
20. Laying of external power supply networks and communication lines
3
20.1. Laying of power supply networks with the voltage up to 1 kV inclusive <*>
20.2. Laying of power supply networks with the voltage up to 35 kV inclusive <*>
20.3. Laying of power supply networks with the voltage up to 330 kV inclusive <*>
20.4. Laying of power supply networks with the voltage more than 330 kV inclusive <*>
20.5. Installation and disassembling of supports of overhead transmission lines with the voltage up
to 35 kV
20.6. Installation and disassembling of supports of overhead transmission lines with the voltage up
to 500 kV
20.7. Installation and disassembling of supports of overhead transmission lines with the voltage
more than 500 kV
20.8. Laying and removing of cords and protection cables of overhead transmission lines with the
voltage up to 35 kV inclusive
20.9. Laying and removing of cords and protection cables of overhead transmission lines with the
voltage more than 35 kV inclusive
20.10. Installation and disassembling of transformer stations and line electric equipment with the
voltage up to 35 kV inclusive
20.11. Installation and disassembling of transformer stations and line electric equipment with the
voltage more than 35 kV inclusive
20.12. Installation of distribution equipment, switch-gears, protection devices
20.13. Laying of external communication lines, including telephone, radio and television lines <*>
21. Construction of units using atomic power
21.1. Construction of units with nuclear facilities
21.2. Construction of units to be used in nuclear weapon structures
21.3. Construction of particle accelerators and hot domes
21.4. Construction of units for storage of nuclear materials and radioactive substances, and
radioactive waste repositories
21.5. Construction of nuclear fuel cycle units
21.6. Construction of units to be used for uranium exploitation and refining
21.7. Decommissioning of units using atomic energy
22. Construction of units to be used in the oil and gas industry
22.1. Laying of arterial and field pipelines
22.2. Development of units to be used for oil and gas preparation for further transportation
22.3. Installation of petroleum storage depots and gas tanks
22.4. Construction of passages under infrastructure facilities (motorcar and railway roads) and other
objections of natural or artificial origin
22.5. Construction of passages by the method of directional drilling
22.6. Ensuring of pipelines electrochemical protection
22.7. Hot tapping into existing arterial and infield pipelines, hot cutoff and hot blinding of existing
arterial and infield pipelines
22.8. Ensuring of anti-corrosion protection and proper isolation of arterial and infield pipelines
22.9. Infrastructure development of marine shelf oil and gas deposits
22.10. Construction of gas filling compressor plants
22.11. Quality control of welded seals and their proper isolation
22.12. Cleaning of chambers and testing of arterial and infield pipelines
23. Equipment installation
23.1. Installation of lifting-and-conveying machines
23.2. Elevators installation
4
23.3. Heat power plants equipment installation
23.4. Boiler plants equipment installation
23.5. Installation of compressor plants, pumps and ventilators <*>
23.6. Installation of electric power devices, equipment, automaton-and-alarm systems<*>
23.7.Installation of equipment of units using atomic energy
23.8. Installation of equipment for purification and preparation of gas and oil for further
transportation
23.9. Installation of equipment of oil and gas pumping stations and equipment of other petroleum
products pipelines
23.10. Installation of equipment for natural gas liquefaction
23.11. Installation of equipment for fuel filling stations
23.12. Installation of equipment for iron works
23.13. Installation of equipment for nonferrous works
23.14. Installation of equipment for the chemical and oil refining industry
23.15. Installation of mining and ore-dressing equipment
23.16. Installation of equipment for railway transport units
23.17. Installation of equipment for underground railways and tunnels
23.18. Installation of equipment for hydroelectric power plants and other hydraulic works
23.19. Installation of equipment for the electrical engineering industry
23.20 Installation of equipment for enterprises engaged in the construction materials producing
industry
23.21. Installation of equipment for enterprises engaged in the paper-and-pulp industry
23.22. Installation of equipment for enterprises engaged in the fabric industry
23.23. Installation of equipment for enterprises engaged in the graphic industry
23.24. Installation of equipment for enterprises engaged in the food-processing industry<*>
23.25. Installation of equipment for enterprises engaged in the entertainment industry
23.26. Installation of equipment for grain elevators and grain processing plants
23.27. Installation of equipment for enterprises engaged in the motion pictures industry <*>
23.28. Installation of equipment for enterprises engaged in the electronic engineering industry and
communication industry<*>
23.29. Installation of equipment for health care institutions and enterprises engaged in the medical
industry <*>
23.30. Installation of equipment for enterprises engaged in the agricultural industry including fish
processing and fish storage <*>
23.31. Installation of equipment for consumer services enterprises and communal services
enterprises<*>
23.32. Installation of water supply intake equipment, sewerage systems and waste disposal plants
23.33. Installation of communication facilities equipment <*>
23.34. Installation of equipment of outer space infrastructure units
23.35. Installation of equipment for airports and other aviation infrastructure units
23.36. Installation of equipment of marine and river ports
24. Starting-up
24.1. Starting-up of carrying-and-lifting equipment
24.2. Starting-up of elevators
24.3. Starting-up of synchronous generators and feed systems
24.4. Starting-up of power transformers and measuring transformers
24.5. Starting-up of switching devices
24.6. Starting-up of relay protection devices
24.7. Starting-up of automation devices in the power supply sector <*>
5
24.8. Starting-up of voltage systems and control-currents systems
24.9. Starting-up of electric machines and electric drives
24.10. Starting-up of automation and alarming systems, and related devices <*>
24.11. Starting-up of systems unattended repair <*>
24.12. Starting-up of total system setting-up <*>
24.13. Starting-up of remote control units <*>
24.14. Starting-up of ventilation and air conditioning systems <*>
24.15. Starting-up of transfer machining lines
24.16. Starting-up of multipurpose cutting machines with digital-programming control
24.17. Starting-up of unique metal cutting machines weighing more than 100 t
24.18. Starting-up of refrigerating plants <*>
24.19. Starting-up of compressor plants
24.20. Starting-up of steam boilers
24.21. Starting-up of water-heating reactors <*>
24.22. Starting-up of boiling auxiliary equipment <*>
24.23. Starting-up of water treatment equipment and water de-mineralization equipment
24.24. Starting-up of processing plants of the fuel-handling sector
24.25. Starting-up of gas-air flow ducts
24.26. Starting-up of common boiler systems and engineering services
24.27. Starting-up of equipment for wood processing and fashioning
24.28. Starting-up of drying units
24.29. Starting-up of water supply facilities
24.30. Starting-up of sewerage facilities
24.31. Starting-up of oil and gas industry units
24.32. Starting-up of units using atomic energy
25. Construction of motor roads and aerodromes
25.1. Installation of the grade level of motor roads, airports aprons, flight strips, taxi strips
25.2. Installation of foundations of motor roads
25.3. Installation of foundations of airports aprons, flight strips, taxi strips
25.4. Installation of motor road overlays including those reinforced with binding substances
25.5. Installation of overlays of airports aprons, flight strips, taxi strips
25.6. Installation of drainage, water accumulation, water conducting, spillway devices
25.7. Installation of guard fences and elements of motor roads development
25.8. Carriageway marking of motor roads
26. Laying of railway and tramway tracks
26.1. Laying of earth beds for railway tracks
26.2. Laying of earth beds for tramway tracks
26.3. Installation of superstructures of railway tracks
26.4. Installation of spillways and protection structures of earth beds of railway tracks
26.5. Installation of alarm systems, centralization systems and locking systems of railways
26.6. Railways electrification
26.7. Soil stabilization in easement areas of railways
26.8. Construction of railway-crossings
27. Construction of tunnels, metro tubes
27.1. Opening driving of tunnels and metro tubes without special driving methods
27.2. Opening driving of tunnels and metro tubes with artificial freezing
27.3. Opening driving of tunnels and metro tubes with tamping
6
27.4. Opening driving of tunnels and metro tubes with electrochemical fixing
27.5. Opening driving of tunnels and metro tubes with sinking lining
27.6. Erection of internal structures of tunnels and metro tubes
27.7. Laying of metro tube tracks
28. Erection of mining structures
28.1. Opening driving of mining structures without special driving methods
28.2. Opening driving of mining structures with artificial freezing
28.3. Opening driving of mining structures with tamping
28.4. Opening driving of mining structures with electrochemical fixing
28.5. Opening driving of mining structures with sinking lining
29. Construction of bridges, flyovers and over-bridges
29.1. Installation of monolithic reinforced concrete and concrete structures of bridges, flyovers and
over-bridges
29.2. Installation of ready-made reinforced concrete structures of bridges, flyovers and over-bridges
29.3. Installation of pedestrian bridges structures
29.4. Installation of steel spans of bridges, flyovers and over-bridges
29.5. Installation of wooden bridges, flyovers and over-bridges
29.6. Installation of masonry bridges, flyovers and over-bridges
29.7. Laying of water conduct pipes on ready footings (bases) and overflow conduits
30. Hydraulic and diving operations
30.1. Earthwork and soil movement operations carried out with water-jet and floating dredges
30.2. Ripping and earthwork operations carried out under water by the power-operated method and
production into spoil disposal
30.3. Drilling operations and well infrastructure development carried out under water
30.4. Pile-work carried out in marine environment from floating units including installation of shell
piles
30.5. Pile-work carried out in river environment from floating units including installation of shell
piles
30.6. Erection of structures of natural or artificial bodies in marine and river environments
30.7. Damming.
30.8. Installation and disassembling of building structures in underwater conditions
30.9. Installation of pipelines in underwater conditions
3.10. Laying of cables in underwater conditions, including power and communication cables
30.11. Diving operations (underwater construction operations), including control over the quality of
hydraulic operations under water
31. Industrial furnaces and smokestacks
31.1. Mason-work of blast furnaces
32.2. Mason-work of superstructures of glass melting tank furnaces
31.3. Assembly of furnaces of precast advanced-compatibility elements
31.4. Electrolysis units to be used in the aluminum industry
31.5. Fire-bricking of industrial smoke- and ventilation furnaces and stacks
32. Construction control by engaged developers or project owners on the basis of contracts with
companies or independent entrepreneurs
32.1. Construction control over structural works (operation type groups and 1 - 3, 5 - 7, 9 – 14)
32.2. Construction control over operations relating to wells development (operation type group N 4)
7
32.3. Construction control over drilling and blasting (operation type group N 8)
32.4. Construction control over operations relating to water supply and sewerage (operation types
N 15.1, 23.32, 24.29, 24.30, operation type groups N 16, 17)
32.5. Construction control over operations relating to heating and gas supply and ventilation
(operation types N 15.2, 15.3, 15.4, 23.4, 23.5, 24.14, 24.19, 24.20, 24.21, 24.22, 24.24, 24.25,
24.26, operation type groups N 18, 19)
32.6. Construction control over operations relating to fire safety (operation types N 12.3, 12.12,
23.6, 24.10 – 24.12)
32.7. Construction control over operations relating to power supply (operation types N 15.5, 15.6,
23.6, 24.3 – 24.10, operation type group N 20)
32.8. Construction control over erection, reconstruction and capital repairs of communication units
(operation types N 20.13, 23.6, 23.28, 23.33, 24.7, 24.10, 24.11, 24.12)
32.9. Construction control over erection, reconstruction and capital repairs of oil and gas industry
units (operation types N 23.9, 23.10, operation type group N 22)
32.10. Construction control over erection, reconstruction and capital repairs of motor roads,
airdromes, bridges, overpasses and viaducts (operation type N 23.35, operation type groups N 25,
29)
32.11. Construction control over development of railway and tramway tracks (operation type N
23.16, operation type group N 26)
32.12. Construction control over erection, reconstruction and capital repairs carried out in
underground conditions (operation type N 23.17, operation type groups N 27, 28)
32.13. Construction control over hydraulic and diving operations (operation type group N 30)
32.14. Construction control over erection, reconstruction and capital repairs of industrial furnaces
and smokestacks (operation type group N 31)
33. Construction control over erection, reconstruction and capital repairs carried out by engaged
developers or project owners on the basis of contracts with companies or independent entrepreneurs
(prime contractors):
33.1. Industrial construction
33.1.1. Enterprises and units engaged in the fuel industry
33.1.2. Enterprises and units engaged in the coal mining industry
33.1.3. Enterprises and units engaged in the ferrous industry
33.1.4. Enterprises and units engaged in the non-ferrous industry
33.1.5. Enterprises and units engaged in the chemical and hydrocarbon processing industry
33.1.6. Enterprises and units engaged in the mechanic engineering and metalwork industry
33.1.7. Enterprises and units engaged in the forestry, woodworking, paper and pulp industry
33.1.8. Enterprises and units engaged in the consumer goods industry <*>
33.1.9. Enterprises and units engaged in the food processing industry<*>
33.1.10. Enterprises and units engaged in agriculture and forest management <*>
33.1.11. Heat power plants
33.1.12. Units using atomic energy
33.1.13. Electric power supply of more than 110 kV
3.1.14. Oil and gas units
33.2. Transport construction
33.2.1. Motor roads and motor transport infrastructure units
33.2.2. Railway communications and railway transport infrastructure units
33.2.3. Airports and other aviation infrastructure units
33.2.4. Motorway and railway tunnels
33.2.5. Underground railways
33.2.6. Bridges (large and average)
8
33.2.7. Enterprises and units of public transport <*>
33.3. Residential construction
33.4. Electric power supply units of up to 110 kV inclusive
33.5. Heating supply units
33.6. Gas supply units
33.7. Water supply and sewerage units
33.8. Buildings and structures of communication units
33.9. Units of marine transportation
33.10. Units of river transportation
33.11. Hydraulic power engineering units
33.12. Border levees, causeways, channels, coast protection structures, conservation reservoirs
(other than hydraulic power engineering units)
33.13. Irrigation and drainage units
34. Construction control by developers or engaged developers or project owners on the basis of
contracts with companies or independent entrepreneurs in the course of erection, reconstruction
and capital repairs of units using atomic energy (operation types N 23.7, 24.32, operation type
group N 21)
9