Material Safety Data Sheet
________________________________________________________________
1. Chemical Product and Company Identification
________________________________________________________________
Product Name: 062 Dragon Blue Dark Date: 01/01/10
Manufacturer: Intenze Products
215 Rt. 17 South
Rochelle Park, NJ 07662
1-201-342-4446
________________________________________________________________
2. Composition / Information on Ingredients
________________________________________________________________
Acrylic Resin TSRN00195201005-5102P
TSRN 00195201005-5100P
Water C.A.S.# 7732-18-5
Pigment Blue 15 C.I. #74160
Titanium Dioxide C.I. #77891
Glycerin C.A.S.# 56-81-5
________________________________________________________________
3. Hazards Identification
________________________________________________________________
INHALATION: In the form of a mist, this product can act as an irritant.
INGESTION: In large quantities may cause drowsiness, headache, increase in
blood sugar levels.
DERMAL CONTACT: May cause mild irritation.
ACUTE EFFECTS: Irritation as noted above.
CHRONIC EFFECTS: Chronic exposure can result in skin irritation and contact
dermatitis. Pre-existing disorders of the skin, eyes, and respiratory tract may be
exacerbated.
EMERGENCY OVERVIEW: Do not allow large amounts to enter sewers, lakes,
streams, or other natural waterways. May be toxic to aquatic life.
POTENTIAL HEALTH EFFECTS: This product is mildly irritating to the eyes.
Avoid eye contact.
________________________________________________________________
4. First Aid Measures
________________________________________________________________
EYE CONTACT: Flush eyes thoroughly with large amounts of water for at least
15 minutes. Get medical attention.
SKIN CONTACT: Wash skin with soap and water. Remove severely
contaminated clothing and clean before reuse. Seek medical attention in the
unlikely event that irritation occurs.
INHALATION: Remove to fresh air. Get medical attention if breathing is difficult.
INGESTION: Do not give anything by mouth to an unconscious person. Do not
induce vomiting. Get immediate medical attention.
________________________________________________________________
5. Fire Fighting Measures
________________________________________________________________
EXTINGUISHING MEDIA: Carbon dioxide, dry chemical or foam recommended.
SPECIAL FIRE-FIGHTING PROCEDURES: Self-contained breathing apparatus
(SCBA) and full protective equipment.
UNUSUAL FIRE AND EXPLOSION HAZARDS: Fire or excessive heat may
produce hazardous decomposition products.
FLAMMABILITY DATA:
Flash Point: Non-flammable material
Flammability Limits: Not applicable
Autoignition Temperature: Not applicable
________________________________________________________________
6. Accidental Release Measures
________________________________________________________________
Contain spill immediately. Insert materials such as dry sand or sawdust may be
used to help absorb any spilled material. Scoop or shovel into appropriate waste
containers for disposal purposes.
Soap and water may be used as necessary.
________________________________________________________________
7. Handling and Storage
________________________________________________________________
HANDLING: Use good hygiene practices. Wash thoroughly after handling.
Handle in well ventilated work space.
STORAGE: Store in moderately cool, dry, well-ventilated area away from direct
sources of heat. Avoid freezing (32 º F). Empty containers may contain product
residues and should be handled accordingly. Keep containers closed.
________________________________________________________________
8. Exposure Control / Personal Protection
________________________________________________________________
ENGINEERING CONTROLS: The use of local exhaust ventilation is
recommended to control emissions near the source.
PERSONAL PROTECTION: Safety glasses with side shields, or goggles, gloves
and impervious clothing are recommended. Respiratory protection is generally
not required. Eye wash fountains should be available.
EXPOSURE LIMITS:
Glycerin: OSHA PEL=10mg/m3 (TWA)
________________________________________________________________
9. Physical and Chemical Properties
________________________________________________________________
Appearance: Blue Opaque
Colorant: Rich Blue
Odor: Slightly ammoniacal odor pH information: N/A
Specific Gravity: N/A Solubility in Water: Miscible
Boiling Point: N/A Vapor Pressure: N/A
Volatile Organic Compounds: CO and unidentified organic compounds may be
formed of decomposition
________________________________________________________________
10. Stability and Reactivity
_____________________________________________________________________________
GENERAL: This product is a stable compound and hazardous polymerization will
not occur. Since it contains water, do not allow it to freeze.
INCOMPATIBILITY: Avoid strong oxidizing agents such as peroxides, chlorates,
perchlorates, nitrates, and permanganates. Oxidizing materials may vigorously
evolve oxygen in large amounts.
HAZARDOUS DECOMPOSITION PRODUCTS: When involved in a fire, burning
organic pigment products may evolve noxious gases which are toxic. These
compounds may include carbon monoxide, carbon dioxide, nitrous oxides, or
hydrogen chloride, depending on the pigment type. All the water must be driven
off first in order for this to occur.
________________________________________________________________
11. Toxicological Information
________________________________________________________________
CARCINOGENICITY: Not identified as a carcinogen by OSHA, IARC, or NTP
MUTAGENICITY: Not indicated
REPRODUCTIVE EFFECTS: Not indicated
________________________________________________________________
12. Ecological Information
________________________________________________________________
ECOTOXICITY: N/A
ENVIRONMENTAL DEGRADATION: Only slightly toxic to fish and aquatic life.
________________________________________________________________
13. Disposal Considerations
________________________________________________________________
This product must be disposed of in compliance with all applicable federal, state,
and local regulations.
Incineration or landfilling are recommended disposal techniques.
________________________________________________________________
14. Transport Information
________________________________________________________________
DOT Shipping Name: Not Regulated
DOT Hazard Class: None
DOT Label: None
DOT Placard: None
________________________________________________________________
15. Regulatory Information
_____________________________________________________________________________
OSHA: This product is considered to be a hazardous substance under OSHA’s
Hazard Communication Standard 29 CFR 1910.1200. It may be mildly irritating to
the eyes.
Canadian WHMIS: This material may be controlled product under WHMIS, due to
eye irritation.
________________________________________________________________
16. Other Information
________________________________________________________________
The information contained herein is based on data considered accurate.
However, no warranty is expressed or implied regarding the accuracy of these
data or the results to be obtained from the use thereof. Intenze Products
assumes no responsibility for personal injury or property damage caused by the
material. Users assume all risks associated with the use of the material.