Introduce chemicals to the laboratories of NTNU NanoLab
Please fill inn this form and send it to nanolab@ntnu.no
You will be contacted if the chemical, based on your information, is not accepted.
Form filled in
Date
Name
List the NanoLab activity numbers the chemical will be used in: NL
Information about the product:
Name of the chemical
CAS-number
Unique numerical identifyer for chemical elements, compounds,
polymers, biological sequences, mixtures and alloys.
Company name of supplier
Product number
Amount
Strength/ purity
Other:
Information about location:
Storage requirements
See material safety data sheet,
Head 7 for guidance, write in
your own words.
Will be used and stored in
Area for chemical methods. click to choose storage place
Identify both room and chemical
cabinet at NTNU NanoLab. Click
on “choose storage place” to
select cabinet
Area for students. click to choose storage place
Area for characterisation and bionanotechnological methods
(ISO 7). click to choose storage place
Area for physical methods (ISO 5+6).
click to choose storage place
Other:
Side 1 av 4
Information about substitution:
For hazardous chemicals it entails an obligation to make an assessment as to whether it can be
replaced/ substituted by another, less hazardous, chemical or substance.
Is there any less hazardous chemical
you could use instead of the one you
have chosen?
Yes, there is
Comment:
No, there is not
Information about method of use:
Tick off “Yes” or “No”
Spraying of the chemical
Yes
No
Risk of leakage in pressurized or
vacuumized system
Yes
No
Heating of fluid
Yes
No
Dust-producing during process
Yes
No
Open work on lab bench without
ventilation
Working in fume hood, under suction
hood or on ventilated bench
Working in closed system with low
risk of leakage
Yes
No
Yes
No
Yes
No
Comments:
e.g. Glove box, safety bench
Information about personal protection equipment:
What personal protection equipment are you going to use?
Select and tick off. See material safety data sheet, head 8 for guidance
Gloves
Disposable Nitrile Gloves
Two pair Nitrile Gloves
Eye protection
Apron
Safety spectacles
Disposable apron, PE
STANSOLV®/A-10CR
Solvent Resistant Gloves (nitrile)
Safety goggles
Protective Apron in nitrile
TRIONIC 517
Acid Resistant Gloves (nitrile,
neoprene and natural rubber)
Face Shield
Tychem C or rubber apron
with long sleeves
Side 2 av 4
Information about disposal of chemical waste
Which waste bottle are you going to use?
See material safety data sheet, head 13 for guidance.
You may also prepare your own properly marked and signed waste bottle. Please specify under “Other”
Select and
Waste bottle
Examples
tick off.
Solvents containing halogenes (fluorine, chlorine,
Organic solvents, halogenated bromine, iodine) Dichloromethane, tetrachloroethylene,
iodomethane, perchlorethane, trichlorothene
950 PMMA Series resists in Chlorobenzene, solvents
Resists / Organic solvents,
containing halogenes (fluorine, chlorine, bromine,
halogenated
iodine)
Ethanol isopropyl alcohol, acetone, hexane, toluene,
Organic solvents, nonmethanol, benzene, pentane, hexane, xylene, diethyl
halogenated
ether, diols, alkanes, alcohols, ketones, aldehydes.
Toluene
Toluene
Solid or liquid organic waste such as destillation
residues, reaction residues, biproducts, used
absorbents.
Waste water, wash water, mill Contaminated water and aqueous solutions not allowed
water
to poor into the drain.
Organic waste,
non-halogenated
Organic solvents with heavy
metals
Resists / Organic solvents
without halogens
Thinners and removers /
Organic solvents without
halogens
Acetone, Isopropyl alcohol and Ethanol containing
heavy metals.
Series: S1800, ma-N 2400, ma-N 400, ma-N 1400, SU8, EL copolymer, PMMA Series resists in Anisole, mrUVCur.
mr-Rem 660, PG-Rem, EL Thinner, Anisol, mr-T 1070,
mr-APS1
Used EBL developers / Organic
MIBK:IPA
solvents without halogens
Organic acids
Inorganic acids
Organic acids such as acetic acid, formic acid, citric
acid. Organic waste (no 7042) mixed with organic or
inorganic acids such as e.g hydrochloric acid, sulphuric
acid, nitric acid, phosphoric acid.
Inorganic acids such as hydrochloric acid, sulphuric
acid, nitric acid, phosphoric acid, sulfonic acids,
perchloric acid, some chlorides and fluorides, thionyl
chloride.
Perchloric acid
Perchloric acid
Hydrofluoric acid
Hydrofluoric acid (HF)
RCA-2 waste
Hydrochloric acid (HCl) and hydrogen peroxide (H2O2)
Gaseous hydrofluoric acid
Hydrofluoric acid (HF) and
hydrogen peroxide (H2O2)
Piranha waste
Sulphuric acid (H2SO4) and hydrogen peroxide (H2O2)
Organic bases
Amines. Organic waste (no 7042) mixed with organic or
inorganic bases such as e.g sodium hydroxide,
potassium hydroxide, ammonia.
Organic bases
containing heavy metals
Organic bases containing Cr and other heavy metals.
Used photoresist developers / MF26A, ma-D 525, mr-Dev 600, ma-D 332,
Organic and inorganic bases ma-D 533 S
Side 3 av 4
Select and
Waste bottle
tick off.
Examples
Inorganic bases
Inorganic bases such as sodium hydroxide, potassium
hydroxide, ammonia, hydrazine, sodium metasilicate.
RCA-1 waste
Ammonia (NH3) and hydrogen peroxide (H2O2).
Laboratory waste
Small (< 30ml) closed sample vials of glass or plastic
with chemicals.
Inorganic salts and other
solids
Solid, inorganic salts not containing organic material
Liquid waste containing heavy metals or other inorganic
Inorganic solutions and liquids compounds, such as Chromium etchant 1020,
ammoniumfluoride, ammoniumsulfide
Mineral-based chlorinated and non-chlorinated hydraulic
Waste oil
oil and lubricating oil. Synthetic oils.
Poisonous wafer material and
Ga, As, Sb, Ir, Pb, Cr, Cd, Co, Cr, Cu, Hg, Mn, Ni, Pb,
wafers with toxic heavy metal
Sn…
coatings
Other:
If other waste will be produced within your activity, e.g. biological waste, or you work with chemicals
that must be disposed of separately, this must be collected in a separate waste bottle/ box marked with
activity number, name, content and warning labels to store it in the meantime (not longer than one
month) in the NanoLab facilities. Do not store reactive solutions! Remember to test peroxide formers
regularly. The user/department of the user is responsible for disposing this waste.
Other information/ comments:
Side 4 av 4