Resuspension of Plexor™ Primers Instructions Dry oligos: 1. 2. Primers containing iso-dC must be stored at a pH greater than 7.0. The Promega Plexor™ Systems (www.promega.com/plexorresources) include MOPS/EDTA Buffer (1mM MOPS, 0.1mM EDTA, pH 7.4) for resuspension and dilution of primers. The MOPS/EDTA Buffer may also be purchased separately from Promega Corporation as Cat.# Y5101). Primers can be diluted to 25X primer stock solutions in MOPS/EDTA Buffer and stored at –20°C as individual primers or as primer sets. For most Plexor™ assays, the 25X concentrations should be 5µM (200nM at 1X). Housekeeping Control Gene Primers: 1. Primers containing iso-dC must be stored at a pH greater than 7.0. The Promega Plexor™ Systems (www.promega.com/plexorresources) include MOPS/EDTA Buffer (1mM MOPS, 0.1mM EDTA, pH 7.4) for resuspension and dilution of primers. The MOPS/EDTA Buffer may also be purchased separately from Promega Corporation as Cat.# Y5101). 2. Primers can be diluted to 25X primer stock solutions in MOPS/EDTA Buffer and stored at –20°C as individual primers or as primer sets. For most Plexor™ assays, the 25X concentrations of the housekeeping primers should be 2.5µM (100nM at 1X). Disclaimer: Iso-base containing oligonucleotides are covered by US Patents 6,001,983, 6,037,120, and 6,140,496 and their foreign counterparts, and licensed to Eurogentec S.A. by EraGen Biosciences, Inc. EUROGENTEC S.A. • LIEGE Science Park • Rue Bois Saint-Jean, 5 • 4102 SERAING • BELGIUM Tel.: +32 4 372 74 00 • Fax: +32 4 372 75 00 • E-mail: info@eurogentec.com