B-628II 2 IN 1 COMPUTER BEAUTY INSTRUMENT MANUAL
ULTRASONIC SECTION:
1.
Function:
It was invented in the 80’s to the Beauty Business.
accelerate problematic skin healing.
It can cure a lot of skin problem and
Easy to operate that pop welcome by the majority of the
beauty professionals and it is also a great investment for them.
1.
It has 3 main functions:
Mechanism Aspect
It can soft the skin tissue, accelerate absorption of skin products, increase body
metabolism and blood circulation, gently stimulate the nerve system and cells etc.
2.
Heat Aspect
It can accelerate the body metabolism rate and blood circulation.
Calm the nerve
tissue and help get rid of pain.
3.
Chemical Aspect
It can accelerate the skin metabolism rate.
Balance the PH value of the skin tissue.
Help skin absorb treatment products and intensify sterilization.
2.
Therapy and Beautification Function:
1.
To help treatment product to sip through the skin with the following particular
function:
1.
Not limited by the quality of the treatment products whether it is ion (+/molecules), water-soluble or medication.
2.
It is more effective than rubbing treatment products into the skin since it will
help skin absorb the treatment products.
2.
3.
Not. Limited by ion
4.
Treated areas can stay fine after treatment.
(+/- molecules) of the products.
5.
Will not cause electricity shock
6.
Easy to operate and make treatment products easy adhere to the skin.
Beautification
1.
Soften blood vein and even out red face.
2.
Rid pimples and acne (every ten days is served as a course)
3.
Rid skin pigmentation.
Use with high unit Vitamin C skin products to
accelerate skin rejuvenation process.
Expect to see result after 3 treatments
with optimum result after 10-40 treatments.
4.
Prevent and rid the formation of wrinkles, soften blood vein and face-lift.
Due to the increase of body metabolism rate, it helps rid the said problem on
a day-by-day basis.
5.
Rid eye bags and dark circles.
Message the delicate eye areas to rid excess
water, puffiness and dark circles.
i
6.
To soften skin tissue by message.
Make it look and behave delicate and
soft.
7.
3.
Accelerate the process of any skin treatments and achieve optimum results.
Instruction:
1.
Before operation, first clean face well with clean facial cream.
2.
Wash off the cream then steam face 10 minutes.
3.
Clear over the comedo on the face.
4.
Spread shrink water on the face and tap it gently then wipe off it.
5.
Test skin conditions then spread the suitable medicine cream on the face.
6.
Turn on the machine then adjust the power of probe to fit skin well.
7.
Set timer to show 15 minutes the normal work time.
8.
Press the button to choose type of wave shape out.
9.
Massage on skin covered medicine cream with probe.
10.
11.
After over the operation, turn off the machine and clean the dirty probe.
If use the machine coming with the Chinese traditional medicine mask powder, it will
have better effect.
4.
Caution:
1.
First clean face (or wounded area) before operation.
2.
The medicine cream used should be mucous to be absorbed in better by skins, at the
same to avoid burning the probe.
3.
Work time set to 15 minutes and it is enough at the normal conditions.
4.
5.
Don’t make the probe to be near eyes or touch eyes to avoid hurt.
Don’t make the probe in work but not operate to touch skin, for to do that is easy to
burn the probe for over heat.
REMOVE SPOT SECTION:
1.
Function:
Remove spot & tattoo
2.
Instruction:
1.
Insert the pin into the handle.
2.
Clean the treat area with alcohol then spread it with anesthetic 3 minutes.
3.
Turn on the machine and ready for operation.
4.
When operating, care the currency lever and adjust a proper energy lever to avoid
hurt.

Spot: special care to test and analysis spot’s conditions, some spots on the surface of
skin but some spots in the deep under skin issue. If spot small, might remove it one
time, if spot big and pigments deposits deep, should remove it 2-3 times.
Don’t cut
through and break the spot’s surface one time, should burn and remove with small
frame way. To spot in the deep under skin, should spread proper cell cream on it
ii
before the wounded cure well 2~3 days, to avoid inflammation or skin hollow happen.
When spread the cream, if the wounded inflame, don’t spread it.

Caruncle: gently touch the end with pin and kill the caruncle cell, later about 6-7
days, the caruncle drops. If the caruncle is too big, should remove it several times and
not finish it in one time to avoid the wounded covers bad.

Tattoo: ordinary tattoo area is big, should choose #3 big bin and treat several times,
remind not finish treatment. Otherwise, the wounded area is very easy to be inflamed,
if happen, should take the sick to hospital to treat soon.
3.
Caution:
1.
The pin should be sterilized before use.
2.
Beautician should keep the handle balance not shake to avoid burning the wounded
BEAUTY INSTRUMENT SPECIFICATION:
1.
The electricity voltage is 1.00MHz, 1MHz (with timer)
2.
Operation time: 1-30 minutes (adjustable)
3.
The intensity has 10 volume.
4.
Electricity Output rate: 0-10W, adjustable.
5.
Pulse rate is 4Hz.
6.
Electricity Input rate: 110V/220V (with adjustable On/Off) 50-60Hz.
7.
Electricity supply rate: equal or less than 40W.
Green-3, Yellow-3, Red-4.
Volt.
Power
Hz.
Temp.
G.W.
Size
240/220/110V
25W
50/60Hz.
5-40˚C
2.3kg
33*27.5*15cm
iii