NPI All.74/P18 Ed.01 Rev.01
Date of issue: April 2011
MATERIAL SAFETY DATA SHEET
1.1 Trade Name:
EXTERNAL LAMINATE
REVERSE LAMINATE
BRUSHED LAMINATE
1.2 Use
Industrial sector: Engraving
Use Sheets for mechanic or laser engraving
2 Hazards identification
To the best of our knowledge and at the condition of correct handling, the material is considered not dangerous.
3 Composition / information on ingredients
4 First aid measures
Inhalation: not applicable at room temperature. In case of inhalation of vapors due to thermal decomposition remove person to fresh air. If breathing is difficult, get medical attention.
Skin contact: not irritant. In case of contact with dust, wash skin with plenty of water.
If irritation persists, get medical attention.
In case of contact with melt material, do not tear to remove. Get medical attention.
Eye contact: wash eyes with plenty of water.
NPI All.74/P18 Ed.01 Rev.01
908Ltd Unit 8 Derwenthaugh Marina, Blaydon on Tyne, Tyne & wear. NE21 5LL
Tel: 08459008908 Fax: 08459008907 www.908ltd.co.uk enquiries@908ltd.co.uk

Date of issue: April 2011
MATERIAL SAFETY DATA SHEET
5 Fire-fighting measures
Extinguishing media: in the event of fire, use following extinguishing media: carbon dioxide, spray water, dry chemical powder.
Personal protection: breathing apparatus and protective clothing should be used.
6 Accidental release measures
Environmental precautions: Keep out of irrigation ditches, sewers and water supplies.
Cleanup: None.
7 Handling and storage
Handling procedure: Avoid breathing processing fumes and vapors.
Storage: Store in a dry and cool place. Avoid exposure to direct sunlight.
8 Exposure controls / personal protection
Good air ventilation and dust aspiration is recommended during processing.
Breathing apparatus and protective clothing should be used.
Avoid breathing processing fumes and vapors.
Avoid breathing dusts.
NPI All.74/P18 Ed.01 Rev.01
908Ltd Unit 8 Derwenthaugh Marina, Blaydon on Tyne, Tyne & wear. NE21 5LL
Tel: 08459008908 Fax: 08459008907 www.908ltd.co.uk enquiries@908ltd.co.uk

Date of issue: April 2011
MATERIAL SAFETY DATA SHEET
According to Regulation (EC) n° 1907/2006
9 Physical and chemical properties
Physical state: Solid
Colour: different colours
Appearance: from clear to matt
Odour: light smell during cutting or engraving
Melting point: ca. 132°C
Softening point: ca. 95°C
Specific gravity:1,15 ÷ 1,20 g/cm3 a 20 °C
Vapor pressure: not applicable
Not applicable Viscosity:
Solubility :not soluble Water
PH: not applicable
Inflammability: > 250°C
Flash point: not applicable
Explosion limit: not applicable
10 Stability and reactivity:
Stability: this product is considered stable. Anyway to prevent a slow decomposition, avoid temperatures above 30°C for long periods. Product thermal decomposition at >250°C.
Hazardous decomposition products: Incomplete combustion leads to the formation of toxic gas mixture such as carbon dioxide, carbon monoxide and traces of acrylic monomers, n-butacrylate and styrene.
Hazardous reactions: No hazardous reaction observed.
NPI All.74/P18 Ed.01 Rev.01
908Ltd Unit 8 Derwenthaugh Marina, Blaydon on Tyne, Tyne & wear. NE21 5LL
Tel: 08459008908 Fax: 08459008907 www.908ltd.co.uk enquiries@908ltd.co.uk

Date of issue: April 2011
MATERIAL SAFETY DATA SHEET
According to Regulation (EC) n° 1907/2006
11 Toxicological information
Ingestion: It’s considered physiological inert. May cause occlusion.
Eyes contact: Dust and decomposition product may cause irritation.
Skin contact: Not irritant. Avoid contact with melt material (see point 4)
Inhalation: Dust and temperatures over decomposition temperature may cause respiratory tract irritation.
12 Ecological information
The product is not soluble in water. It can be separated from water by mechanical means.
13 Disposal considerations
According to present waste disposal laws, scrap material are considered as non toxic or harmful waste such as urban solid waste. The product, being a thermoplastic product, is recyclable, and can be incinerated and granulated by Licensed companies that are equipped for this purpose.
Packaging: Dirt packaging should be wasted under the same conditions of the material.
14 Transport information
This product is not subject to restriction and to transport regulation.
908Ltd Unit 8 Derwenthaugh Marina, Blaydon on Tyne, Tyne & wear. NE21 5LL
Tel: 08459008908 Fax: 08459008907 www.908ltd.co.uk enquiries@908ltd.co.uk

NPI All.74/P18 Ed.01 Rev.01
Date of issue: April 2011
MATERIAL SAFETY DATA SHEET
According to Regulation (EC) n° 1907/2006
15 Regulatory information
No labeling is required in accordance with the EEC directives.
16 Other information
None.
The information given in present document are based on the best available current knowledge. It is however impossible to foresee and check all the variables in the use of our products. The information provided does not therefore imply any guarantee or commitment by the Company.
Data and information contained herein are not to be considering binding, and do not exempt users from carrying out their own tests for verifying the suitability of the product.
All the above supplied data refer only to the above mentioned specific product and may change without giving notice.
908Ltd Unit 8 Derwenthaugh Marina, Blaydon on Tyne, Tyne & wear. NE21 5LL
Tel: 08459008908 Fax: 08459008907 www.908ltd.co.uk enquiries@908ltd.co.uk