data sheet

advertisement
MATERIAL SAFETY DATA SHEET
Page1 of total 5
Revision: 26 June 2003
Date of issue: 9 June 2005
COMPANY DETAILS
Manufacturer / Supplier: ILVA POLIMERI S.P.A
Via A/COSTA 2
220030 SENGO
MILANO ITALY
Phone: 0039 299 0991
Facsimile: 0039 299 051 634
Emergency phone (Italy): 0039 299 0991
Australian Supplier
Akzolux Pty Ltd
Crash Supplies Pty Ltd
22 George Street
Stepney
South Australia 5069
Phone: (08) 813 29000
Emergency Phone: (08) 813 29000
(08) 813 29000 (After hours)
INDENTIFICATION
Product Name: TA15
Proper Shipping Name: PAINT
Other Names: Acrylic sealer
Manufacturer’s Product Code: VTA15
UN Number: 1263
Dangerous Goods Class & Subsidiary Risk: Flammable Liquid 3
Packaging Group: II
Hazchem Code: 3[Y]E
Poisons Schedule Number: None allocated
Use: paint/vanish/coating for wood and wood finishing
Physical Description / Properties
Appearance: Transparent liquid with solvent odour
Boiling Point (ºC): 78,50oC
Vapour Pressure (mm of Hg at 25ºC): 64,000
Special Gravity (at 20ºC): 0,930 Kg/L
Flash Point (ºC) : 4,00 o C
Flammability Limits (%): not applicable
Solubility in Water (gm/L): not applicable
msds.
Page2 of total 5
Other Properties
Highly flammable.
Harmful by inhalation, in contact with skin and if swallowed. Irritating to eyes, respiratory system and
skin.
Vapours may cause drowsiness and dizziness.
Contains Methacrylate: may produce allergic reactions.
Ingredients
Chemical Entity
Methyl Ethyl Ketone
2Methoxy1methylethylacet
Toluene
Xylene (isomers mixture)
Isopropyl Alcohol
Methyl Methacrylate
CAS Number
78-93-3
108-65-6
108-88-3
1330-20-7
67-63-0
80-62-6
Proportions
10 % – 25 %
< 10%
10 % – 25 %
< 10%
< 10 %
< 10 %
HEALTH HAZARD INFORMATION
Health Effects
Swallowed:
Eyes:
Skin:
slightly irritating
slightly irritating
slightly irritating
Inhaled:
slightly irritant
Toxicology
DL 50 (ORAL/RAT)
>2000 mg/kg ( all the components have a toxicity rating
expressed as DL 50 higher than this limit )
INHALATION
: slightly irritant
SKIN CONTACT : slightly irritating
EYES CONTACT : slightly irritating
INGESTION
: slightly irritating
First Aid
General:
In all cases of doubt, or when symptoms persist, seek medical attention.
Never give anything by mouth to an unconscious person
Ingestion:
If accidentally swallowed obtain immediate medical attention. Keep at rest
Do NOT induce vomiting
Eyes:
Skin:
Inhaled:
Contact lenses should be removed.
Irrigate copiously with clean, fresh water for at least 15 minutes
Keeping eyelid open. Seek medical advice
Remove contaminated clothing. Wash skin thoroughly with soap and water
Or use a proprietary skin cleaner. Do NOT use solvents or thinners.
Remove to fresh air, keep the patient warm and at rest.
If breathing is irregular or stopped, administer artificial respiration. Give
Nothing by mouth. If unconscious, place in the recovery position and
Seek medical advice.
Advice to Doctor
msds.
No own experience available
Page 3 of total 5
PRECAUTIONS FOR USE
Exposure Standards:
Methyl Ethyl Ketone
2Methoxy1methylethyacet
Toluene
Xylene (isomers mixture)
Isopropyl Alcohol
Methyl Methacrylate
200,000 ppm
50,000 ppm
50,000 ppm
100,000 ppm
400,000 ppm
50,000 ppm - TWA
Engineering Controls:
Provide adequate ventilation. Where reasonably predicable this should be achieved by the use
of local exhaust ventilation and good general extraction.
If these are not sufficient to maintain concentrations of particulates and/or solvent vapours
below the relevant occupational exposure limits, suitable respiratory protective equipment
should be worn (see “Personal protection below)
Personal Protection:
Respiratory protection. - Air-fed respiratory protective equipment should be worn when this
product is sprayed if the exposure of the sprayer or other people nearby cannot be controlled
to below the occupational exposure limit and engineering controls and methods cannot be
improved.
Hand protection. - When skin exposure may occur, advice should be sought from gloves
suppliers on appropriate types. Barrier creams may help to protect exposed areas of the skin
but are not substitutes for full physical protection. They should not be applied once exposure
has occurred.
Eye protection. - Eye protection designed to protect against liquids splashes should be worn.
Skin protection. – Cotton or cotton/synthetic overalls or coveralls are normally suitable.
Grossly contaminated clothing should be removed and the skin washed with soap and water
or a proprietary skin cleaner.
Flammability and Reactivity:
Stable under the recommended storage and handling conditions. In a fire, hazardous
decomposition products such as smoke carbon monoxide; carbon dioxide and oxides of
nitrogen may be produced.
Keep away for oxidising agents and strongly acidic materials to prevent the possibility of
exothermic reaction.
msds.
Page 4 of total 5
SAFE HANDLING INFORMATION
Storage and Transport
Handling: Vapours are heavier than air and may spread along floors. They may form
explosive mixtures with air. Prevent the creation of flammable or explosive concentrations of
vapour in air and avoid vapour concentrations higher then the occupational exposure limits.
Additionally, the product should only be used in areas from which all-naked lights and other
sources of ignition have been excluded.
Electrical equipment should be protected to the appropriate standard.
Keep the container tightly closed. Exclude sources of heat, sparks and open flames. Nonsparking tools should be used.
Avoid skin and eye contact. Avoid inhalation of vapour and spray mist. Smoking, eating and
drinking should be prohibited in areas of storage and use. Do not use pressure to pour liquids
from containers; they are not pressure-proof containers.
Never use containers. Never use containers different from the original ones. Keep a high
standard of hygiene and house keeping, removing continuously the wastes, and thus
minimizing the spontaneous self-combustion risks.
The product is subject to electrostatic charging. Provide adequate earthing in case of pouring,
filling instructions. The operators must wear electrostatic boots and the flooring must be
conductive.
Storage: Follow all the precautions reported on the label. Store the material in a fresh, wellventilated place, preferably at the temperature between 5 and 25 deg. C, keeping the
containers away from direct sun exposure. Do not smoke. Do not allow free entrance into the
storage area to unauthorized personnel The partially opened containers must be carefully
sealed and kept vertical position to prevent spillages.
Spills and Disposal
Exclude sources of ignition and ventilate the area. Exclude non-essential personnel. Avoid
breathing vapours. Contain and collect spillages with non-combustible absorbent materials,
e.g. sand, earth, vermiculite, diatomaceous earth and place in a suitable container for disposal
in accordance with the waste regulations Do not allow to enter drains or watercourses.
Clean preferably with a detergent; avoid the use of solvents. If the product enter drains or
sewers the local water company should be contacted immediately; in the case of streams
rivers or lakes, the national Rivers Authority
Page 5 of total 5
msds.
Fire/Explosion Hazards
Extinguishing media: Use foam, carbon dioxide, powder extinguishers or other chemical fire
fighting apparatus. A positive pressure self-containing breathing apparatus is often necessary.
Clean fire area from unprotected personnel.
Do not enter confined space without helmet, face shield, bunker coat, gloves, rubber boots. A
water stream can scatter flames. A water spray may be used to cool closed containers to
prevent pressure build up and auto ignition or explosion when exposed to fire.
Fire will produce dense black smoke containing hazardous products of combustions
Decomposition products may be a hazard to health. Do not allow entering drains or
watercourses.
OTHER INFORMATION
Ecological information
There is no data availabe on the product itself. The product should not be allowed to enter
drains or water courses or be disposed where it can effect ground or surface waters.
The Air Pollution Control requirments of regulation made under the Environmental Protection
Act may apply to the use of this product
Note for users:
The information contained in the present sheet are based on our own knowledge on the date of the last
version. Users must verify the suitability and thoroughness of provided information according to each
specific use of the product .
This document must not de regarded as a guarantee on any specific product property.
The use of this product is not subject to our direct control; therefore, users must, under their own
responsibility, comply with the current health and safety laws and regulations. The producer is relieved
from any liability arising from imporoper uses.
The information contained in this Material Safety Data Sheet (MSDS) has been taken
from the MSDS provided by the manufacturer ILVA POLIMERI S. P. A. in the
European Community format. It has been transposed to comply with the Work safe
Australia Standard NOHSC: 3001.
msds.
msds.
Download