SECTION 1: PRODUCT IDENTIFICATION
PRODUCT:
Mouth Rinse
Product Label Name: Mouth Rinse
Company Name and Address:
Emergency Telephone Number:
NDC, Inc.
407 New Sanford Road
La Vergne, TN 37086
631-656-3800
Recommended use: Used as a Mouth Rinse.
SECTION 2: HAZARDOUS INGREDIENTS
Overview: A blue liquid with a pleasant mint flavor. This product is intended to be used as a rinse
for teeth and gums. No unusual hazards expected.
Warning: Not a Sterile Liquid. Not for use with Patients on Mechanical Ventilators, Patients
suffering from Cystic Fibrosis, or a Weakened Immune System.
Hazardous Components
(Specific Chemical Identity: Common Name(s) OSH PEL ACGIH TLV
This product contains no SARA 312 or SARA 313 reportable substances
Not regarded as health or environmental hazard under current legislation. The product will not
present significant health hazard in normal use.
Product in compliance with California Prop 65 requirements.
NA = Ingredients not usually considered hazardous; no TLV or PEL available
SECTION 3: INFORMATION ON INGREDIENTS
Not Applicable
SECTION 4: FIRST-AID MEASURES
Inhalation: Not expected.
Skin contact: This product is expected to contact with skin. Skin irritation -wash with soap and
water
Eye contact: Rinse immediately with plenty of water, also under the eyelids, for at least 15
minutes. Obtain medical attention if irritation persists.
Ingestion: Call a physician or Poison Control Center
SECTION 5: FIRE-FIGHTING MEASURES
Flashpoint: N/A
Flammable Limits: N/A
LEL (Lower): None
UEL (Upper): None
Suitable Extinguishing Media: Foam, CO2
Special Fire fighting Procedure: None
Unusual Fire and Explosion Hazards: None
Hazardous Combustion Products: None
SECTION 6: ACCIDENTAL RELEASE MEASURES
Steps to be taken in case of material release or spilled: Wipe up small amounts and flush area to
drain; collect and return large amounts to container.
Waste Disposal: Dispose of in accordance with all applicable local, state, and federal regulations.
SECTION 7: HANDLING AND STORAGE
OSHA Standard Format
Avoid Extreme Heat and Cold. Store in cool, dry place
Other Precautions NOTE: UNDER NORMAL CONDITIONS OF USE, THIS PRODUCT IS
NOT A HAZARDOUS MATERIAL AS DEFINED BY THE OSHA HAZARD
COMMUNICATIONS STANDARD
SECTION 8: EXPOSURE CONTROLS
Ventilation: No special ventilation normally required.
Respiratory Protection: No personal respiratory protective equipment normally required
Protective Gloves: Not required.
Eye protection: Not required for normal use.
Work/Hygienic Practice: Normal cleanliness
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance and Odor: A clear blue liquid with pleasant mint odor.
Boiling point / range: 212 º F
Melting point / range: N/A
Specific Gravity (water = 1): 1.0
Solubility in Water: Soluble
Vapor Pressure (mmHg.): 17.5
Vapor density (AIR = 1): N/A
SECTION 10: STABILITY AND REACTIVITY
Stability: Stable
Condition to Avoid: Extreme Temperatures
Materials to Avoid: Strong Oxidizers, Strong Acids, Active Metals
Hazardous Decomposition Products: None
Hazardous Polymerization: Will not occur
SECTION 11: TOXICOLOGICAL INFORMATION
Symptoms / Effects of Over-exposure: None Known
Medical conditions that may be aggravated by exposure: May cause skin irritation in very
sensitive individuals.
SECTION 12: ECOLOGICAL INFORMATION
No data is currently available
SECTION 13: DISPOSAL CONSIDERATIONS
Dispose in accordance with all state, local and federal regulations.
SECTION 14: TRANSPORTATION INFORMATION
N/A
SECTION 15: REGULATORY INFORMATION
N/A
SECTION 16: OTHER INFORMATION
Prepared By:
Issue Date:
Revision Date:
Kara Mckigney
5-8-14
5-8-14
Disclaimer:
The information provided in this SDS is correct a n d i s to the best of our knowledge,
at the date of its publication. The information given is designed only as a guide for safe handling,
OSHA Standard Format
use, processing, storage, transportation, disposal and release and is not to be considered as a
warranty or quality specification. The information relates only to the specific material designated and
may not be valid for such material used in combination with any other material or in any process, unless
specified in the text.
OSHA Standard Format