Loosaver Cement Primer
Stone slabs, quartz tiles and ceramic tiles are the most beautiful and practical
decoration materials to relieve the beauty of architectures. Loosaver Primer, the
newest developed product, is the best companion for enhancing cement adhesion
and providing protection to slabs and tiles.
Why can cement not stick firmly with stone slabs and ceramic tiles? Why do slabs
and tiles dislocate and pop up always? Earthquakes and frequent foot traffic are the
causes.
Stone slabs and ceramic tiles are hard materials. Earthquakes break the cement
adhesion which results in tear-off and crack of slabs.
Safety warrantee and appearance beauty are fundamental requirements for
architectures. How to improve and prevent from the above mentioned problems? Is
it related to decorative or adhesive materials? We find out the interface between
stone slabs or ceramic tiles and cement is the clue.
After years of research and test, Gekko team has successfully developed a surfactant,
the Loosaver Premier, as a primer being spread all over on the back of stone slabs
and tiles to effectively solve the cement adhesion problem. Gekko Primer is the
accredited and reliable product for your choice.
Why are there stone problems? Though we all know that impregnation on the
surface of slabs prevent stains, however, the real effective prevention for stone
problems should be at the back.
For those slabs that did not treat with Loosaver Primer, small poles of stone will
directly contact with cement that will create efflorescence, water stain, rust stains,
yellowing, cracking and other stone problems which spoil the beauty of stones. Even
for stone back that applied with epoxy and polyester, it results in cement adhesion
problems as well. Loosaver Primer provides the right solutions for back protection of
stone slabs.
Cement adhesion problems with ceramic tile and dislocation of polished quartz tiles
vastly happen. As consumers are losing their confidence, ceramic tiles manufacturers
are keen to find ways to solve these problems, otherwise they may face the problem
of losing business. Loosaver Primer provides the solutions for big quartz tiles
adhering. Use the right primer that guarantees a long lasting beauty of architectures.
Stone blocks originating from different quarries in the world require professional
knowledge and patience in process to obtain good quality stone slabs. Natural cracks
and holes must be filled up with mastics once stone slabs have been sliced from
blocks. Loosaver Primer features with strong tensile strength and adhesive powers
through its high inter-molecular attraction force.
Adhesion problems that may arouse should be considered, although it is right to
apply resin and fiberglass mesh at the back of fragile marble slabs to increase
bending strength against cracking.
Thereafter, it is vital to apply a coating of Loosaver Primer by spraying or rolling. We
also need to separate individual slabs with PE or PVC while Loosaver Primer at the
stone back is barely dry.
Polishing procedures on production line can be continued at once. Same processes
apply to agglomerate, glass block, extra thin slabs, composite tiles, terracotta, and
high polished quartz tiles.
It is a general practice to use pressurized spray of Loosaver Primer for applying on
small slabs.
It is a technological breakthrough to simply spray a even coating on the back of
different kind of stone slabs and tiles, which creates three specialized features.
It is amazing that Loosaver Primer simultaneously provides mechanical crushing
force, physical adhesion and elasticity to absorb the earthquakes’ shaking
movements.
The typical feature of Loosaver Primer presents a better hydrophilic attraction with
cement. Spray-on method is comparatively more effective and cost saving than
smear-on method. Decorators just need to spray Gekko Primer evenly on the back of
slabs or tiles before installation.
When high alkalinity cement mix with water, the mixture at first exhaust heat and
swell, and then shrink with temperature cool down. The adhesion between cements
and slabs is temporary rather than firm enough. Air traps and dislocation between
slabs and cements are common. Adhesion problems were usually aroused when
slabs were laid un-flatted or insufficient hammering by unskillful workmanship.
Loosaver Primer presents three kinds of adhesion forces. ten times greater than the
former.
Through capillary of natural stones, water and impurities may penetrate into the
stones which spoiled the beauty of stone floor. BTW, the stain problem may also
happen on ceramic tiles.
Granite will easily get rust stains. Too much water absorption will break the cement
adhesion at the back and even disintegrate the surface of slabs. Loosaver Primer
gives you effective solutions to tackle the above mentioned stone problems. It is also
effective for marble stone.
The application of Loosaver primer is easy – just spreading Loosaver Premier with roll
on the back of slabs and tiles twice on method. It is crucial to apply evenly. Moreover,
applying Loosaver Premier by spraying is also recommended.
The specific formula of Loosaver Primer can solve adhesion problems for stone slabs
and ceramic tiles. Simultaneously equipped with “triple adhesion” via mechanical,
physical and chemical attraction, Loosaver Premier also offers “triple protection” on
counteracting air traps, cracking and staining.
Features of Loosaver primer:
1. an interface adhesion.
2. with elasticity of shock absorption
3. hydrophilic, hydrophobic and counter osmosis
Loosaver Premier is an effective and economic product which provides guaranteed
adhesiveness as well as long lasting beauty of slabs and tiles.
From application of primer on stone slabs production line to the concept of
application on construction site, Loosaver provides the superlative technical
know-how and comprehensive training for achieving best workmanship for laying
stone slabs and tiles.
Loosaver o’s Worldwide spreading distributors are willing to provide you our best
service in products and relevant information. Loosaver team is so enthusiastic in
cooperating with you that would synchronize the world for creating a better future.
Thank you.