References for the Supplemental Text Material

advertisement
References for the Supplemental Text Material
1. Acosta- Meejia, C. J. (1999), “Improved P Charts to Monitor Process Quality”, IIE
Transactions, Vol. 31, pp. 509-516.
2. Aerne, L. A., Champ, C. W., and Rigdon, S. E. (1991), “Evaluation of Control Charts
Under Linear Trend”, Communications in Statistics: Theory and Methods, Vol. 20,
No. 10, pp. 3341-3349.
3. Andrews, H. P. (1964). “The Role of Statistics in Setting Food Specifications”,
Proceedings of the Sixteenth Annual Conference of the Research Council of the
American Meat Institute, pp. 43-56. Reprinted in Experiments in Industry: Design,
Analysis, and Interpretation of Results, eds. R. D. Snee, L. B. Hare and J. R. Trout,
American Society for Quality Control, Milwaukee, WI 1985.
4. Bain, L. J., and Engelhardt, M. (1987), Introduction to Probability and Mathematical
Statistics, 2nd edition, PWS-Kent, Boston, MA.
5. Barton, R. R. (1997). “Pre-experiment Planning for Designed Experiments: Graphical
Methods”, Journal of Quality Technology, Vol. 29, pp. 307-316.
6. Barton, R. R. (1998). “Design-plots for Factorial and Fractional Factorial Designs”,
Journal of Quality Technology, Vol. 30, pp. 40-54.
7. Barton, R. R. (1999). Graphical Methods for the Design of Experiments, Springer
Lecture Notes in Statistics 143, Springer-Verlag, New York.
8. Baxley, R. V., Jr. (1995), “An Application of Variable Sampling Interval Control
Charts”, Journal of Quality Technology, Vol. 27, pp. 275-282.
9. Bishop, T., Petersen, B. and Trayser, D. (1982). “Another Look at the Statistician’s
Role in Experimental Planning and Design”, The American Statistician, Vol. 36, pp.
387-389.
10. Bissell, D. (1994), Statistical Methods for SPC and TQM, Chapman and Hall,
London.
11. Box, G. E. P. and S. Jones (1992). “Split-Plot Designs for Robust Product
Experimentation”. Journal of Applied Statistics, Vol. 19, pp. 3-26.
12. Champ, C. W., and Rigdon, S. E. (1991), “A Comparison of the Markov Chain and
the Integral Equation Approaches for Evaluating the Run Length Distribution of
Quality Control Charts”, Communications in Statistics: Simulation and Computation,
Vol. 20, No. 1, pp. 191-204.
13.
Champ, C. W., and Rigdon, S. E. (1997), “An Analysis of the Run Sum Control
Chart”, Journal of Quality Technology, Vol. 29, pp. 407-417.
14. Charnes, J. M., and Gitlow, H. S. (1995), “Using Control Charts to Corroborate
Bribery in Jaialai”, The American Statistician, Vol. 49, pp. 386-389.
15. Ciminera, J. L., and Lease, M. P. (1992), “Developing Control Charts to Review and
Monitor Medication Errors”, Hospital Pharmacy, Vol. 27, p. 192.
1
16. Czitrom, V., and Reece, J. E. (1997). “Virgin Versus Recycled Wafers for Furnace
Qualification: Is the Expense Justified?” in V. Czitrom and P. D. Spagon (eds),
Statistical Case Studies for Industrial Process Improvement, pp. 87-104, Society for
Industrial and Applied Mathematics, Philadelphia, PA.
17. David, H. A. (1951), “Further Applications of the Range to Analysis of Variance”,
Biometrika, Vol. 38, pp. 393-407
18. Davis, R. B., Homer, A., and Woodall, W. H. (1990), “Performance of the Zone
Control Chart”, Communications in Statistics: Theory and Methods, Vol. 19, pp.
1581-1587.
19. Dolezal, K. K., Burdick, R. K., and Birch, N. J. (1998), “Analysis of a Two-Factor R
& R Study with Fixed Operators”, Journal of Quality Technology, Vol. 30, pp. 163170.
20. Duncan, A.J. (1955), “The Use of the Range in Computing Variabilities”, Industrial
Quality Control, Vol. 9, No. 5, pp. 18-22. (Clarification and Further Comment, Vol.
11, No. 8, p. 70; Errata, Vol. 12, No. 2, p. 36).
21. Finison, L. J., Spencer, M., and Finison, K. S. (1993), “Total Quality Measurement in
Health Care: Unsing Individuals Charts in Infection Control”, pp. 349-359, in ASQC
Quality Congress Transactions, ASQC, Milwaukee, WI.
22. Grant, E. L. and Leavenworth, R. S. (1996), Statistical Quality Control, 7th Edition,
McGraw-Hill, New York.
23. Hahn, G. J. (1977). “Some Things Engineers Should Know About Experimental
Design”, Journal of Quality Technology, Vol. 9, pp. 13-20.
24. Hahn, G. J. (1984). “Experimental Design in a Complex World”, Technometrics, Vol.
26, pp. 19-31.
25. Hamada, M., and Weerahandi, S. (2000), “Measurement Systems Assessment via
Generalized Inference”, Journal of Quality Technology, Vol. 32, pp. 241-253.
26. Herath, H. S. B., Park, C. S., and Prueitt, G. C. (1995), “Monitoring Projects using
Cash Flow Control Charts”, The Engineering Economist, Vol. 41, pp. 27.
27. Hinkley, D. V. (1970), “Inference About the Change-Point in a Sequence of Random
Variables”, Biometrika, Vol. 57, pp. 1-17.
28. Hogg, R. V., and Craig, A. T. (1978), Introduction to Mathematical Statistics, 4th
edition, Macmillan, New York.
29. Howarth, R. J. (1995), “Quality Control Charting for the Analytical Laboratory: Part
1. Univariate Methods”, Analyst, Vol. 120, pp. 1851-1873.
30. Hunter, W. G. (1977). “Some Ideas About Teaching Design of Experiments With 25
Examples of Experiments Conducted by Students”, The American Statistician, Vol.
31, pp. 12-17.
31. Hurwicz, A., and Spagon P. D. (1997), “Identifying Sources of Variation in a Wafer
Planarization Process”, in V. Czitrom and P. D. Spagon (eds), Statistical Case Studies
2
for Industrial Process Improvement, pp. 105-144, Society for Industrial and Applied
Mathematics, Philadelphia, PA.
32. Jaehn, A. H. (1987), “Zone Control Charts – SPC Made Easy”, Quality, Vol. 26
(October), pp. 51-53.
33. Jin, C., and Davis, R. B. (1991), “Calculation of Average Run lengths for Zone
Control Charts With Specified Zone Scores”, Journal of Quality Technology, Vol. 23,
pp. 355-358.
34. Klein, M. (2000), “Two Alternatives to the Shewhart x Control Chart”, Journal of
Quality Technology, Vol. 32, pp. 427-431.
35. Leon, R. V., A. C. Shoemaker and R. N. Kackar (1987). “Performance Measures
Independent of Adjustment”. Technometrics, Vol. 29, pp. 253-265
36. Levey, S., and Jennings, E. R. (1992), “Historical Perspectives: The use of Control
Charts in the Clinical Laboratory”, Archives of Pathology and Laboratory Medicine,
Vol. 116, pp. 791-798.
37. Luko, S. N. (1996), “Concerning the Estimators R / d2 and R / d 2* in Estimating
Variability in a Normal Universe”, Quality Engineering, Vol. 8, No. 3, pp. 481-487.
38. Montgomery, D. C., Peck, E. A., and Vining, G. G. (2006), Introduction to Linear
Regression Analysis, 4th edition, John Wiley & Sons, new York.
39. Myers, R. H., and Milton, J. S. (1991), A First Course in the Theory of Linear
Statistical Models, PWS-Kent, Boston, MA.
40. Nelson, L. S. (1975), “Use of the Range to Estimate Variability”, Journal of Quality
Technology, Vol. 7, pp. 46-48.
41. Ott, E. R. (1947), “An Indirect Calibration of an Electronic Test Set”, Industrial
Quality Control, Vol. 3, No. 4, pp. 11-14.
42. Park, C., and Reynolds, M. R., Jr. (1994), “Economic Design of a Variable Sample
Size X Chart” Communications in Statistics: Simulation and Computation, Vol. 23,
pp. 467-483.
43. Patnaik, P. R. (1950), “The Use of the Mean Range as an Estimator of Variance in
Statistical Tests”, Biometrika, Vol. 37, pp. 78-87.
44. Prabhu, S. S., Montgomery, D. C., and Runger, G. C. (1997), “Economic-Statistical
Design of an Adaptive X Chart”, International Journal of Production Economics,
Vol. 49, pp. 1-15.
45. Quinlan, J. (1985). “Product Improvement by Application of Taguchi Methods”.
Third Supplier Symposium on Taguchi Methods, American Supplier Institute, Inc.,
Dearborn, MI.
46. Reynolds, J. H. (1971), “The Run Sum Control Chart Procedure”, Journal of Quality
Technology, Vol. 3, pp. 23-27.
47. Roberts, S. W. (1966), “A Comparison of Some Control Chart Procedures”,
Technometrics, Vol. 8, pp. 411-430.
3
48. Rodriguez, R. N. (1996), “Health Care Applications of Statistical Process Control:
Examples using the SAS System”, pp. 1381-1396, in Proceedings of the 21st SAS
Users Group Conference, SAS Users Group International, Cary, NC.
49. Roes, K.C.B., and Roes, R. J. M. M. (1995), “Shewhart-Type Charts in Nonstandard
Situations (with discussion).” Technometrics, Vol. 37, pp. 15-40
50. Runger, G. C., and Fowler, J. W. (1998). “Run-to-Run Control Charts with
Contrasts.” Quality and Reliability Engineering International, Vol. 14, pp. 262-272.
51. Runger, G. C., and Montgomery, D. C. (1993), “Adaptive Sampling Enhancements
for Shewhart Control Charts”, IIE Transactions, Vol. 25, pp. 41-51.
52. Ryan, T. P, and Schwertman, N. C. (1997), “Optimal Limits for Attributes Control
Charts”, Journal of Quality Technology, Vol. 29, pp. 86-98.
53. Samuel, T. R., Pignatiello, J. J., Jr., and Calvin, J. A. (1998), “Identifying the Time of
a Step Change with x Control Charts”, Quality Engineering, Vol. 10, pp. 521-527.
54. Schilling, E. G. (1978), “A Lot Sensitive Sampling Plan for Compliance Testing and
Acceptance Inspection”, Journal of Quality Technology, Vol. 10, pp. 47-51.
55. Schwertman, N. C., and Ryan, T. P (1997), “Implementing Optimal Attributes
Control Charts”, Journal of Quality Technology, Vol. 29, pp. 99-104.
56. Shore, H. (2000), “General Control Charts for Attributes”, IIE Transactions, Vol. 32,
pp. 1149-1160.
57. Sullivan, J. H., and Woodall, W. H. (1996), “A Comparison of Control Charts for
Individual Observations”, Journal of Quality Technology, Vol. 28, pp. 398-408.
58. Tagaras, G. (1998), “A Survey of Recent Developments in the Design of Adaptive
Control Charts”, Journal of Quality Technology, Vol. 30, pp. 212-231.
59. Tippett, L. H. C. (1925), “On the Extreme Individuals and the Range in Samples
Taken from a Normal Population”, Biometrika, Vol. 17, pp. 364-387.
60. Wheeler, D. J. (1995), Advanced Topics in Statistical Process Control, SPC Press,
Knoxville, TN.
61. Woodall, W. H., and Montgomery, D. C. (2000-01), “Using Ranges to Estimate
Variability”, Quality Engineering, Vol. 13, pp. 211-217.
62. Yashchin, E. (1994), “Monitoring Variance Components” Technometrics, Vol. 36,
pp. 379-393.
63. Zimmer, L. S., Montgomery, D. C., and Runger, G. C. (1998), “A Three-State
Adaptive Sample Size X Control Chart”, International Journal of Production
Research, Vol. 36, pp. 733-743.
64. Zimmer, L. S., Montgomery, D. C., and Runger, G. C. (2000), “Guidelines for the
Application of Adaptive Control Charting Schemes”, International Journal of
Production Research, Vol. 38, pp. 1977-1992.
4
Download