Proposal Template - NZ Synchrotron Group Ltd

advertisement
1. Experiment
Title The Title should be descriptive and have no more than 250 characters.
Round 2009/1
Type Normal
Scientific Area (select from list)
Keywords
You can use keywords in order to provide more information.
Keywords should be separated by commas. One "keyword" can have up to 100
characters.
Abstract
In no more than 100 words of plain language, summarise aims,
significance and expected outcomes. Maximum 100 words
Scientific Purpose, and the Importance of the Proposed Research
Describe the proposed experiment at a level that can be understood by
scientists from a related field, addressing the following points:
· The significance and background of the project: why is it interesting and important?
· The aim of the experiment: what information do you expect to get, and how will it
contribute to your project? This should be the major part of this section.
· Originality of the experiment
· The relationship the proposed experiment has to the ongoing work of your group,
including the status of preliminary experiments
· Student participation, while not a requirement, needs to be tracked: does this work
form part of a Masters/PhD thesis? What is the role of the students involved e.g.
sample preparation, data collection or data analysis?
Maximum 600 words
Proposed Experiment
If in doubt on any aspect please discuss the proposed experiment with the relevant
beamline scientist. This section should include:
· A detailed description of the proposed experimental plan and procedures such that
the review committee and referees can assess the feasibility of the proposed work.
Estimate the time required for each part of the plan. A sketch may help if a nonstandard setup is proposed and/or you are bringing your own equipment.
· Justification of the number of samples you are planning to measure, and the number
of measurements on each e.g. the number of temperature steps you propose.
· An explanation of your estimate of the amount of beam time needed. Include an
estimate of setup time and time required per sample.
Maximum 600 words
Experience of Participants, and outcome of previous ASRP/Australian
Synchrotron Experiments
Please detail the experience of the principal scientist and his/her previous
experiments. Briefly mention experience of other participants. Maximum 600 words
Give a brief description of all participants’ previous experience with synchrotron
radiation and the experimental results obtained. Detail the experience of the Principal
Scientist on this proposal, and list all ASRP and Australian Synchrotron funded
experiments performed during the last three years by the Principal Scientist. Give a
brief (one or two sentence) description of the outcomes, for example list any
publications (including those in preparation), or give the status of data analysis,
whether additional beamtime is needed to allow the research to be published, etc.
The need to use Synchrotron Radiation for this research
· Why is synchrotron radiation required for this research project, ie can't the
experiment be done with laboratory facilities? Describe results from other techniques
if this aids in justifying the use of a synchrotron.
· Explain the choice of beamline/facility for the experiment.
Maximum 1000 characters
References
Please reference publications relevant to your proposed research. References from the
above sections should be listed here.
Maximum 1000 characters
Intellectual Property (I.P.) Issues Yes/No
Intellectual Property Details
If there are any issues of Intellectual Properties with respect to carrying out your
experiment please inform what concerns need to be addressed.
Maximum 1000 characters
Does this work form a critical part of a student thesis?
Yes/No
Note that this should also be indicated in the ‘Scientific Purpose’ section above.
2. Researchers
Name
Email
Role
(select from list)
Principal Scientist, Co-proposer (editor), Co-proposer
Attending
Yes/No
(select from list)
3. Beamlines
Beamline (select from list)
Desired starting date
Alternative Dates (and/or dates NOT suitable)
No. Days Requested
Experimental Setup
Please provide the beam parameters you require from the beamline in order to carry
out your experiment, such as energy range/wavelength, beam size/divergence, and so
on. Give values for parameters marked with an * in the table above.
Ancillaries, Detectors, Sample Environment
Select from list
4. Samples
For each material or substance that will be used
Principal Name
CAS #
Mass (g) or Volume (mL)
Please provide the physical form of your sample
Solid
Powder
Single Crystal
Status of sample
(select from list)
Liquid
Gas
Prepared (tick) or Date ready (fill in box)
Please indicate what will happen to sample after experiment
Disposed by AS
Removed by User
(select from list)
Safety information
Please enter safety details for your sample. You must select at least one box.
Toxic Corrosive
Flammable
Explosive
Radioactive
Carcinogenic Biological Hazard
Not Hazardous
Sample and Safety Comments
Single Crystal Information (if applicable)
Comments
A
B
C
Alpha
Beta
Gamma
At Temperature (K)
Space Group
5. Figures
Upload figure
Caption
Download