Item
DL 3155A01
Spec's
Spec's with Sw
AUTOMOTIVE ELECTRIC COMPONENTS AND CIRCUITS - didactic
equipment: - Theoretical topic coverage: Voltage drop in series
connection, The measurement of the angular displacement by means of
a potentiometer, Lamps, The light plant of an automobile, The stop
lights, The intermittent lights, The diodes in the light plant, The use of
the diodes for dividing the circuits, Operating principles of the relay,
Circuits with relays, Delay circuits with relays, The thermistors in the
automobile, Thermal switches, The acoustic signalling, The engine
starting control - Circuit blocks: The voltage drops, The side lights and
the reverse lights, The normal beams, The high beams, The stop lights,
The intermittent lights, Use of the relay, The thermal sensors, The
acoustic signalling, The engine starting control. It must be possible to
perform the following experiences: The voltage drops, The side ligths
and the reverse lights, The normal beams, The high beams, The stop
lights, The intermittent lights, Use of the relay , The thermal sensors, The
acoustic signalling, The engine starting control. The faults must be
inserted by microswitches mounted on the board; the module must be
provided with a EISA BUS 31+18 INTERFACE, connections and test points
by 2mm terminals.
Dimensions of the module: 297x260mm.
The module must be supplied with a theoretical and practical manual.
AUTOMOTIVE ELECTRIC COMPONENTS AND CIRCUITS
- didactic
equipment: - Theoretical topic coverage: Voltage drop in series
connection, The measurement of the angular displacement by means of a
potentiometer, Lamps, The light plant of an automobile, The stop lights,
The intermittent lights, The diodes in the light plant, The use of the diodes
for dividing the circuits, Operating principles of the relay, Circuits with
relays, Delay circuits with relays, The thermistors in the automobile,
Thermal switches, The acoustic signalling, The engine starting control Circuit blocks: The voltage drops, The side lights and the reverse lights,
The normal beams, The high beams, The stop lights, The intermittent
lights, Use of the relay, The thermal sensors, The acoustic signalling, The
engine starting control. It must be possible to perform the following
experiences: The voltage drops, The side ligths and the reverse lights, The
normal beams, The high beams, The stop lights, The intermittent lights,
Use of the relay , The thermal sensors, The acoustic signalling, The engine
starting control. The faults must be inserted by software and by
microswitches mounted on the board. The module must be provided with
a EISA BUS 31+18 INTERFACE for connection to power supply and PC,
with a software able to allow the study of theoretical topics through PC
with hyper textual navigation according to the HTML standard.
Connections and test points by 2mm terminals.
Dimensions of the module: 297x260mm.
The module must be supplied with a theoretical and practical manual.