MATERIAL SAFETY DATA SHEET
FORSCH POLYMER CORPORATION
3025 S. WYANDOT STREET
ENGLEWOOD, CO 80110
IMPORTANT: BEFORE OPENING ANY FORSCH POLYMER PACKAGES, READ
WARNING LABELS AND FOLLOW ALL PRECAUTIONS.
TELEPHONE NUMBER: (303) 322-9611
PAGE 1 OF 4
==============================================================================
SECTION 1
==============================================================================
FORSCH POLYMER CORP.
PRODUCT NUMBER: AMN 370B
3025 S. WYANDOT STREET
PRODUCT NAME:
AMN 370B
ENGLEWOOD, CO 80110
CHEMICAL TYPE: EPOXY RESIN
HARDENER
EMERGENCY NUMBER:
(303)322-9611
DATE OF REVISION:
HAZARD RATING:
NOVEMBER 2013
(4) EXTREME
(1) SLIGHT
(3) HIGH
(2) MODERATE
(0) INSIGNIFICANT
TOXICITY:
2
FIRE: 0
REACTIVITY: 2
SPECIAL:
==============================================================================
SECTION 2
HAZARDOUS COMPONENTS
==============================================================================
C.A.S.
(ACGIH)
(OSHA)
(ACGIH)
NO.
PERCENT
TLV
PEL
STEL
PHENOL
(HYDROXYBENZENE)
DIETHYLENE
TRIAMINE (DETA)
MODIFIED ALIPHATIC
POLYAMINE
108-95-2
111-40-0
<2% BY WT
5PPM, 19MG/M3
10PPM, 38MG/M3
>30% BY WT
NOT ESTABLISHED
<68% BY WT
NOT ESTABLISHED
SARA TITLE III SECT. 313: THIS PRODUCT CONTAINS PHENOL WITH ABOVE % WT. AND IS
SUBJECT TO THE REPORTING REQUIREMENTS
SUSPECTED CANCER AGENT:
YES________________
NO ______X_____
==============================================================================
SECTION 3
PHYSICAL DATA
==============================================================================
BOILING POINT
:
NOT DETERMINED
VAPOR DENSITY (AIR = 1)
:
NOT DETERMINED
SOLUBLE IN WATER
:
NOT DETERMINED
SPECIFIC GRAVITY
:
1.09 AT 77 DEG F
EVAPORATION RATE
:
NOT DETERMINED (BUTYL ACETATE = 1)
APPEARANCE AND ODOR
:
CLEAR, PALE AMBER LIQUID.
DENSITY
:
9.1 LBS/GAL AT 77 DEG F
==============================================================================
MATERIAL SAFETY DATA SHEET
FORSCH POLYMER CORPORATION
PAGE 2 OF 4
==============================================================================
SECTION 4
FIRE AND EXPLOSION HAZARD DATA
FLASH POINT:
168 DEG C
EXTINGUISHING MEDIA:
METHOD:
PENSKY MARTIN CLOSED CUP
FOAM, DRY CHEMICAL, CARBON DIOXIDE (CO2)
NOTE: TOXIC FUMES WILL BE EVOLVED WHEN THIS MATERIAL IS INVOLVED IN A FIRE. SELF
CONTAINED BREATHING APPARATUS SHOULD BE AVAILABLE FOR FIRE FIGHTERS, COOL FIRE
EXPOSED CONTAINERS WITH WATER.
==============================================================================
SECTION 5
HEALTH HAZARD DATA
==============================================================================
ACUTE TOXICITY:
MAY CAUSE BURNS TO SKIN AND EYES. HIGH CONCENTRATION OF
VAPORS CAN CAUSE IRRITATION OF EYES AND RESPIRATORY TRACT.
LIQUID CAUSES DAMAGE TO MUCOUS MEMBRANES IF SWALLOWED.
CHRONIC:
PROLONGED OR REPEATED EXPOSURE MAY CAUSE ASTHMA AND SKIN
SENSITIZATION OR OTHER ALLERGIC RESPONSE.
==============================================================================
SECTION 6
FIRST AID PROCEDURES
EYE CONTACT:
IMMEDIATELY FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST
15 MINUTES LIFTING UPPER AND LOWER LIDS OCCASIONALLY. GET
IMMEDIATE MEDICAL ATTENTION. IF A PHYSICIAN IS NOT IMMEDIATELY
AVAILABLE, CONTINUE FLUSHING WITH WATER.
SKIN CONTACT:
IMMEDIATELY FLUSH SKIN WITH WATER FOR AT LEAST 15 MINUTES
WHILE REMOVING CONTAMINATED CLOTHING AND SHOES. LAUNDER
CLOTHING BEFORE RE-USE AND DISCARD CONTAMINATED LEATHER
ARTICLES. GET MEDICAL ATTENTION IF SWELLING OR REDDENING
OCCURS.
INHALATION:
REMOVE TO FRESH AIR IF EFFECTS OCCUR AND ADMINISTER MOXYGEN
IF NECESSARY. GET MEDICAL ATTENTION IF EFFECTS PERSIST.
INGESTION:
DO NOT IDUCE VOMITING. VOMITING WILL CAUSE FURTHER DAMAGE TO
THE THROAT. DILUTE BY GIVING WATER OR MILD TO DRINK IF VICTIM IS
CONSCIOUS GET MEDICAL ATTENTION IMMEDIATELY.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE:
NOT KNOWN.
MATERIAL SAFETY DATA SHEET
FORSCH POLYMER CORPORATION
PAGE 3 OF 4
==============================================================================
SECTION 7
REACTIVITY DATA
STABILITY: STABLE UNDER NORMAL STORAGE CONDITIONS.
INCOMPATIBILITIES: AVOID CONTACT WITH STRONG OXIDIZING AGENTS, MINERAL ACIDS
(E.G. H SO , HCI) AND EPOXY RESINS UNDER UNCONTROLLED CONDITIONS.
HAZARDOUS DECOMPOSITION:
CO (CARBON MONOXIDE)
CO2 (CARBON DIOXIDE)
NOX (OXIDES OF NITROGEN)
==============================================================================
SECTION 8
SPILL OR LEAK PROCEDURES
ACTION TO BE TAKEN: AVOID CONTACT WITH MATERIAL. PERSONS NOT WEARING
APPROPRIATE PROTECTIVE EQUIPMENT (SEE BELOW) SHOULD BE EXCLUDED FROM THE
AREA OF SPILL UNTIL CLEAN-UP IS COMPLETED. STOP SPILL AT SOURCE, DYKE AREA TO
PREVENT SPREADING, PUMP LIQUID TO SALVAGE TANK. REMAINING LIQUID MAY BE TAKEN
UP ON CLAY, DIATOMACEOUS EARTH OR OTHER ABSORBENT, AND SHOVELED INTO DISPOSAL
CONTAINERS.
WASTE DISPOSAL METHOD: DISPOSE OF AS HAZARDOUS WASTE IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS.
==============================================================================
SECTION 9
SPECIAL PROTECTION INFORMATION
==============================================================================
RESPIRATORY PROTECTION: NIOSH APPROVED RESPIRATORY PROTECTION REQUIRED IN
THE ABSENCE OF PROPER ENVIRONMENTAL CONTROL. FOR EMERGENCIES, A SELFCONTINED BREATHING APPARATUS OR FULL FACE RESPIRATOR IS RECOMMENDED.
EYE PROTECTION: SPLASH PROOF GOGGLE OR SAFETY GLASSES WITH SIDE SHIELDS.
GLOVES: IMPERVIOUS GLOVES, NEOPRENE OR RUBBER
VENTILATION: BREATHING OF VAPORS MUST BE AVOIDED. VENTILATION MUST BE
SUFFICIENT TO CONTROL VAPORS. THIS MATERIAL SHOULD BE CONFINED AS FAR AS
POSSIBLE WITHIN SEALED OR COVERED EQUIPMENT IN WHICH CASE NORMAL VENTILATION
WILL BE NEEDED IN AREAS WHERE VAPORS ARE EXPECTED TO BE VENTED.
OTHER PROTECTIVE EQUIPMENT: CLEAN, BODY-COVERING CLOTHING. FURTHER SAFETY
EQUIPMENT (APRON, FOOTWEAR, ETC.) SHOULD BE USED AS NECESSARY TO PREVENT
CONTACT WITH
MATERIAL.
MATERIAL SAFETY DATA SHEET
FORSCH POLYMER CORPORATION
PAGE 4 OF 4
==============================================================================
SECTION 10
SPECIAL PRECAUTIONS
==============================================================================
1. PREVENT ALL SKIN AND EYE CONTACT
2. AVOID BREATHING VAPORS
3. RE-SEAL PARTLY USED CONTAINERS.
4. ENSURE THAT ALL CONTAINERS ARE PROPERLY LABELED TO PREVENT ACCIDENTAL
INGESTION.
5. WASH WITH SOAP AND WATER BEFORE EATING, DRINKING, SMOKING OR USING TOILET
FACILITIES.
6. OBSERVE CONDITIONS OF GOOD INDUSTRIAL HYGIENE AND SAFE WORKING PRACTICE.
7. STORE IN A COOL, DRY PLACE WITH ADEQUATE VENTILATION, AWAY FROM OPEN FLAMES
AND HIGH TEMPERATURES.
==============================================================================
DISCLAIMER
==============================================================================
INFORMATION PRESENTED HEREIN HAS BEEN COMPILED FROM INFORMATION PROVIDED TO
US BY OUR SUPPLIERS AND OTHER SOURCES CONSIDERED TO BE DEPENDABLE AND IS
ACCURATE AND RELIABLE TO THE BEST OF OUR KNOWLEDGE AND BELIEF BUT IS NOT
GUARANTEED TO BE SO. NOTHING HEREIN IS TO BE CONSTRUED AS RECOMMENDING ANY
PRACTICE OR USE OF ANY PRODUCT IN VIOLATION OF ANY PATENT OR IN VIOLATION OF ANY
LAW OR REGULATION. IT IS THE USER’S RESPONSIBILITY TO DETERMINE AND TO ADOPT
SUCH SAFETY PRECAUTIONS AS MAY BE NECESSARY. WE MAKE NO WARRANTY AS TO THE
RESULTS TO BE OBTAINED IN USING ANY MATERIAL AND, SINCE CONDITIONS OF USE ARE
NOT UNDER CONTROL, WE MUST NECESSARILY DISCLAIM ALL LIABILITY WITH RESPECT TO
USE OF ANY MATERIAL SUPPLIED BY US.