FOR IMMEDIATE RELEASE
Media Contact:
Heather Marshman
Parker PR, Inc.
P: 1-703-314-5414
E: hmarshman@parker-pr.com
2016 AHR Expo to Showcase HVACR Industry’s Latest
Across Numerous Market Categories
WESTPORT, Conn., October 28, 2015 – Focused on highlighting advancements that
address the dynamic requirements of today’s HVACR industry, the International AirConditioning, Heating, Refrigerating Exposition (AHR Expo) will once again
spotlight the cutting edge in developments for 2016.
Over 80 percent of the Show Exhibitors plan to introduce new or upgraded
products, systems and technologies that will be unveiled and showcased on the
2016 AHR Expo floor. Spanning categories from indoor air quality to software, and
addressing the interests of contractors, engineers, wholesalers/distributors, facility
managers and owners/operators, these innovations are expected to touch every
corner of interest from across the HVACR industry.
“We are impressed by the ingenuity, inventiveness and problem-solving capabilities
seen in the incredible variety of the 2016 exhibition line-up,” said Clay Stevens,
president of International Exposition Company. “It’s apparent that manufacturers
have been hard at work in redefining the limits of HVACR innovation, as well as finetuning – and in some cases altogether reinventing – what have already been deemed
as bar-raising developments.”
Air-Conditioning & Refrigeration
The air-conditioning and refrigeration market has seen great shifts in recent years,
as trends in energy efficiency, coupled with new demands from burgeoning
construction verticals like data centers, healthcare and education, have created new
and greater cooling requirements. Additionally, an increase in retrofit construction
has posed challenges from the perspective of both general equipment design and
installation parameters.
With these shifts have come several innovations to be displayed at the 2016 AHR
Expo, such as:
 Wireless Bluetooth transducer app for monitoring refrigerant pressure, with
remote, real-time data management capabilities from any WiFi-enabled device
 Brazed plate heat exchangers with maximum performance at both full and
partial loads, and capabilities as either an evaporator or a condenser
 High-temp cushioned clamping system featuring proprietary thermoplastic
rubber that resists high heat and facilitates elongated pipe life by minimizing
vibration fatigue
 Quick-install mounting brackets for VRF/VRV systems
Building Automation & Control
A large number of products slated for launch at the 2016 AHR Expo are following a
trend of automatic data acquisition through smart thermostat, sensor and other
instrumentation. With these technologies, measurements like temperature,
humidity and differential pressure are read and then controlled as needed through
wireless, easy-to-install and self-configuring sensors and vents.
New or upgraded building management and related control systems to be seen on
the 2016 expo floor include:
 Compact-sized BMS solution for small- to mid-sized buildings that is quickly and
non-disruptively installed, even during normal business hours, and provides
robust monitoring of HVACR, lighting and other systems while accounting for
variable demand response
 Hand-held testing instrumentation for building commissioning and balancing
that pairs with wireless probes/modules to display and log measurements of
differential pressure, air velocity, volumetric air flow, temperature, humidity,
dew point and wet bulb temperatures
 Conglomerate CO2 concentration, temperature and relative humidity monitor
designed for greenhouse applications to illicit energy savings while maintaining
desired CO2 ppm levels
Energy Efficiency & Renewable Energy
As energy efficiency and the incorporation of advanced/renewable energy sources
remain strong inspiration for HVACR industry innovation, the 2016 AHR Expo show
floor will reflect this across numerous exhibits. These include:
 Active desiccant hybrid air handling system that has been optimized to deliver
low dew point air while minimizing regeneration energy input
 Cooling tower filtration system designed to overcome inefficiencies in water
usage and power consumption associated with older technologies used on
cooling tower basins
 Low Pressure Drop (LPD) Y-strainer that eliminates a bridge wall to facilitate
direct and lower-velocity fluid flow while lessening turbulence, minimizing
pressure drop and reducing overall energy costs
Heating
Heating equipment, while representing one of the longest-standing exhibition
categories, remains an ever-evolving arena for innovation and technological
advancement. Several boiler systems will be showcased at the 2016 AHR Expo,
reflecting a commitment to ingenuity even across the HVACR industry’s most
traditional product lines.
Among the line-up of new products to be exhibited are:
 Multi-fuel condensing (MFC) hydronic boiler that can operate on #2 fuel oil,
providing a back-up solution for healthcare, industrial, military, emergency
operation and other mission-critical environments
 Rotary air-to-air heat exchanger primarily designed for comfort ventilation
applications, with compact casing and new matrix geometry that facilitate
efficient and optimized performance
 Condensing boiler unit engineered with a high mass, resilient cast iron heat
exchanger capable of holding latent heat longer than traditional materials
Indoor Air Quality (IAQ)
With indoor air quality as an increasingly defined parameter in today’s building
methods, particularly as the building envelope becomes tighter and more efficient,
the IAQ exhibition category has quickly evolved into one of the most popular among
AHR Expo attendees.
To address IAQ requirements and the latest standards from entities like ASHRAE,
manufacturers are tirelessly innovating to address issues like fresh air intake and
general air exchange, as well as moisture control, air particulate management and
emissions detection.
Examples of the newest IAQ solutions to be exhibited at the 2016 AHR Expo in
Orlando include:
 Non-woven polyester pleated filters with integrated activated carbon for
economical odor and molecular filtration management
 All-in-one steam humidification system which feeds high-purity water to the
humidifier water tank, reducing operating costs and maintenance via prevention
of scale build-up
Instruments & Controls
Key to the day-to-day in-field functions of many AHR Expo attendees, instruments
and controls remain an area of keen annual interest, particularly as these
innovations can streamline troubleshooting and reduce unnecessary visits to the
jobsite.
A sampling of new instruments and controls to be exhibited in 2016 include:
 Factory calibrated infrared sensors for the precise detection of refrigerants in
enclosed spaces
 Field-programmable controller offering four gas channel inputs from digital
and/or analog transmitters to monitor toxic, combustible and refrigerant gases
in commercial, institutional and light industrial applications
 Smart phone application-driven portable clamp-on ultrasonic flow meter for
monitoring the flow of liquid through metal or plastic pipe in a range of
applications
Plumbing
Foundational to the built environment, plumbing systems have played a consistent
and significant role in AHR Expo exhibition history. From the latest in piping and
fitting technology, to valve and pumping systems, to innovations in domestic hot
water production, the 2016 exhibition floor will feature plumbing solutions
including:
 Insulation couplings designed for polypropylene metric pipe that create a vapor
barrier at the clamping points in insulated tube and pipe installations
 Hydronic balancing coil kit bag and tag valve solution, featuring automatic,
multi-turn and circuit setter balancing valves and accessories including
strainers, ball valves, PT port unions and stainless steel hoses
 Mechanical temperature-sensitive water main controls that do not require
batteries or electricity, and elicit automatic water shut-off to avoid pipe damage
when detected temperatures fall below freezing
Software
With the technological advancement of HVACR products and systems has come an
influx of ancillary software development. As a crucial part of the HVACR landscape,
software is a driver behind everything from holistic building management
integration, to mission-critical application monitoring, to intuitive interpretation of
a homeowner’s dynamic preferences.
Numerous examples of software’s role in the HVACR space will be exhibited at the
2016 AHR Expo in Orlando, including:
 Intuitive selection software that streamlines the design engineering process by
providing complete lines of radiant, fan coil, heat pump and hydronic heating
systems, and facilitating schedule creation, dynamic submittals and other
automated report generation
 Cloud-based platform designed specifically for mechanical and HVAC contractors
to manage information exchange to and from the jobsite
 No-cost web-enabled tool that harnesses the power of Google Maps to remotely
perform ACCA-approved Manual J load calculations and generate professionally
formatted reporting for residential applications
Tools & Contractor Suppliers
Recognizing that time is money for mechanical contractors, several manufacturers
have carved a notable niche in the development of tools and supplies that
streamline a wide scope of contractor installation and service functions.
The 2016 AHR Expo floor will feature new tools and supplies such as:
 Compact 10-inch snip providing full-size performance at a lightweight 9.5
ounces, with large protective loops that are easily leveraged and 3-inch carbon
steel blades that ensure efficient, controlled straight cuts, circles or squares in
26-gauge steel
 Extreme temperature foil tape with 1.75 mm aluminum foil backing and
specially formulated acrylic adhesive, designed specifically for sealing hightemperature flue pipes and furnace-certified plastic vent pipes
Ventilation Equipment
As part of the IAQ movement and in response to notably increased building
envelope performance, more and more ventilation solutions are being seen across
the AHR Expo show floor. The evolution of energy recovery ventilation (ERV)
technology is only one poignant example of how ventilation as a market category is
growing by leaps and bounds across North America.
Addressing guidelines and standards from entities like ASHRAE and the USGBC,
ventilation technologies have become key for integration across both residential
and commercial construction, with contractors and engineers on high alert for the
latest solutions that can meet their project needs.
Numerous ventilation products and systems solutions will be exhibited at the 2016
AHR Expo in Orlando, including:
 Cost-effective mechanical ventilation system for residential applications that
manages both humidity and temperature, with an independently powered and
controlled 120 volt ENERGY STAR fan that operates separately from air
conditioning and heating units
 Fabric end air duct/dispersion system that replaces traditional ductwork,
insulation, diffusers and air valves, providing even air distribution, improved
energy efficiency, streamlined installation and reduced maintenance
 Combined louver/damper with drainable 45-degree fixed exterior-facing blades
and adjustable interior-facing blades with seals that can be completely closed,
offering superior resistance to weather infiltration
Other
Many other products, technologies, tools and services of value to HVACR
professionals will also be on display at the 2016 AHR Expo in Orlando, some of
which include:
 Handheld portable USB microscopes for inspection and quality control functions,
with magnification ranges from 10x to 900x and integrated software that can
capture images, record video, annotate and perform measurements, and store or
email findings/results
 Hydrocarbon refrigerants study guide, developed to help technicians navigate
the safe maintenance of systems that employ HCs and other flammable
refrigerants
 Comprehensive ASHRAE climate data resources/reports, including International
Weather for Energy Calculations, Climate design Information, Weather Data
Viewer DVD, and ASHRAE Standard 169-2013, Climate Data for Building Design
Standards
For additional information or to register for 2016 AHR Expo, January 25 to 27 in
Orlando, visit www.ahrexpo.com.
About AHR Expo
The International Air-Conditioning, Heating, Refrigerating Exposition (AHR Expo),
which began more than 85 years ago as a heating and ventilation show, has now
grown into one of the world’s largest HVACR events. The Exposition is held annually
in key markets and major cities across the U.S., hosting close to 2,000 exhibitors and
bringing in crowds of 60,000 industry professionals. The Show provides a unique
forum for the HVACR community to come together and share new products,
technologies, and ideas. The event is co-sponsored by ASHRAE and AHRI, and is held
in conjunction with ASHRAE’s Winter Conference.
About International Exposition Company, Inc. (IEC)
International Exposition Company (IEC) is a Westport, Conn.-based trade show
management company. For more than 100 years, the company has built its
reputation on a track record of honesty, respect and fairness for exhibiting
companies and show attendees. IEC owns and manages three major trade show
events; the annual AHR Expo (International Air-Conditioning, Heating, Refrigerating
Exposition), the biennial AHR Expo-Mexico, and the biennial Chem Show.
Attendance across these three events totals in excess of 70,000.
-# # #-